Boom truck 55 tons. national nbt50/55. BOOM LENGTHS: 32 to 128 ft JIB LENGTHS: 26 to 45 ft JIB OFFSETS: 0-30
|
|
- Morgan Small
- 5 years ago
- Views:
Transcription
1 Boom truck tons national nbt/ BOOM LENGTHS: 32 to 128 ft JIB LENGTHS: 26 to 45 ft JIB S: 0-30
2 NOTES:
3 National Crane Series NBT Product Guide ASME B30.5 Imperial % Features 31,1 m (102 ft) four-section full power boom or optional 39,01 m (128 ft) five-section full power boom 45,36 t ( USt) at 2,44 m (8 ft) ratg and 49, t ( USt) at 2,44 m (8 ft) Self-lubricatg Easy Glide wear pads Hydraulic removable counterweight system Outrigger design elimates need for SFO
4 Features National Crane NBT 45,36 t ( USt) maximum capacity 41,1 m (135 ft) maximum tip height (ma boom) 54,6 m (179 ft) maximum tip height (boom with extension) National Crane NBT 49, t ( USt) maximum capacity 41,1 m (135 ft) maximum tip height (ma boom) 54,6 m (179 ft) maximum tip height (boom with extension) Deluxe operator s cab The Series NBT operator s cab cludes all-steel construction with acoustical lg and tted glass throughout, air conditiong, deluxe seat with arm rest mounted sgle-axis electric controllers, wdshield and slidg skylight with electric wipers, diesel heater with defroster, circulatg fan, fire extguisher, and dual cab mounted work lights. Equipped with left, right ground level and -cab outrigger controls. The Series NBT outriggers allow quick and easy crane set-up and cludes a new outrigger beam position sensg system that aids the operator selectg the right load chart based on the crane s outrigger footprt. The front outrigger box has an X-shaped footprt that elimates the need for a sgle front outrigger. Dimensions: Full span: Front: 7,09 m (23 ft 3 ) Rear: 7,39 m (24 ft 3 ) Mid span: Front: 4,72 m (15 ft 6 ) Rear: 4, m (16 ft 1 ) Retracted-front and rear: 2,39 m (7 ft 10 ) Counterweight Two-piece 13,8 kg ( lb) each (total 2721,6 kg [00 lb]) hydraulically removable counterweight slabs. Removable counterweight slabs can be stowed on front outrigger box for roadg. Four or five-section boom The Series NBT can be equipped with two different boom lengths 31,1 m (102 ft) and 39,01 m (128 ft).
5 Features Best class performance and serviceability The Series NBT represents the pnacle of mache performance, combg the latest both hydraulic and electronic mache control. This product provides premium operator comfort with the latest Manitowoc cab design, simplified mache setup with no need for an SFO and front bumper control of the hoist(s). The cable follower will keep constant tension on the rope reducg the potential for bundlg Speedy-reeve boom tip and sheave blocks simplify riggg changes by decreasg the time needed to change le reevg Easy Glide boom wear pads reduce the conditions that cause boom chatter and vibration. The net result is smoother crane operation Pressure compensated, load sensg hydraulic system - PTO mounted axial piston pump - Superstructure mounted reservoir with tegral suction valve/filter, return filter, sight gauge, and temperature gauge - Oil cooler with 406 mm (16 ) fan and temperature sensor - Pressure transducers tegral to the lift cylder holdg valve LMI system features a 178 mm (7 ) graphical, color display. Real-time crane formation is displayed with numerous operator features such as soft metric load chart conversion, hydraulic filter change remders and an electronic hour meter. LMI system also displays key truck diagnostics such as fuel level, coolant temperature and DPF status *Product may be shown with optional equipment. The display console allows each crane control function to be set dependently to reduce speed (%, %, %, and 30%) Dual axis controls are optional for superior operator control, along with standard air conditiong, a diesel heater and ergonomic seats
6 Specifications Boom and extension combations data NBT Series Available two basic models: NBT-102: Equipped with a 9,51 m - 31,1 m (31.2 ft ft) four-section boom. This model can be equipped with an optional 7,9 m - 13,7 m (26 ft- 45 ft) extension, providg a maximum tip height of 46,9 m (154 ft). 9,51 m - 31,1 m (31.2 ft ft) four-section boom FJM-OS 7,9 m - 13,7 m (26 ft - 45 ft) two-section offsettable at and 3 manual extension NBT-128: Equipped with a 9,7 m - 39,0 m (31.7 ft ft) five-section boom. This model can be equipped with an optional 7,9 m - 13,7 m (26 ft - 45 ft) two-section offsettable extension, providg a maximum tip height of 54,6 m (179 ft) 9,7 m - 39,0 m (31.7 ft ft) five-section full power boom FJM-0S 7,9 m - 13,7 m (26 ft - 45 ft) two-section offsettable and 3 manual extension NBT - 102: Equipped with a 9,51 m - 31,1 m (31.2 ft ft) four-section boom. This model can be equipped with an optional 7,9 m - 13,7 m (26 ft- 45 ft) extension, providg a maximum tip height of 46,9 m (154 ft). 9,51 m - 31,1 m (31.2 ft ft) four-section boom FJM-OS 7,9 m - 13,7 m (26 ft - 45 ft) two-section offsettable at and 3 manual extension NBT-128: Equipped with a 9,7 m - 39,0 m (31.7 ft ft) five-section boom. This model can be equipped with an optional 7,9 m - 13,7 m (26 ft - 45 ft) two-section offsettable extension, providg a maximum tip height of 54,6 m (179 ft) 9,7 m - 39,0 m (31.7 ft ft) five-section full power boom FJM-0S 7,9 m - 13,7 m (26 ft - 45 ft) two-section offsettable and 3 manual extension Note: Maximum tip is measured with outriggers/stabilizers fully extended.
7 Specifications NBT and NBT wch data All wch pulls and speeds are shown on the fourth layer. Wch le pulls would crease on the first, second, and third layers. Wch le speed would decrease on the first, second, and third layers. Wch le pulls may be limited by the wch capacity or the ANSI 5 to 1 cable safety factor. 1 part le max. pull 2 part le max. pull 3 part le max. pull 4 part le max. pull 5 part le max. pull 6 part le max. pull 7 part le max. pull 8 part le max. pull 9 part le max. pull 10 part le max. pull Standard planetary wch Cable supplied Average breakg strength 1 sheave 3 sheave 5 sheave Low speed 16 mm (5/8 ) diameter rotation resistant IWRC kg (56,400 lb) 5103 kg (11,2 lb) 58,2 m/m (191 fpm) kg (22,0 lb) 28,9 m/m ( fpm) kg (33,0 lb) 14,2 m/m (63 fpm) kg (45,000 lb) 17,3 m/m (47 fpm) kg (56,2 lb) 11,6 m/m (38 fpm) kg (67,0 lb) 9,4 m/m (31 fpm) kg (78,0 lb) 8,2 m/m (27 fpm) kg (,000 lb) 7,0 m/m (23 fpm) kg (,000 lb) 6,4 m/m (21 fpm) 48 8 kg (,000 lb) 5,8 m/m (19 fpm) High speed 16 mm (5/8 ) diameter rotation resistant IWRC kg (56,400 lb) 2268 kg (00 lb) 116,7 m/m (383 fpm) 4536 kg ( lb) 58,2 m/m (191 fpm) 64 kg (15,000 lb) 38,7 m/m (127 fpm) 72 kg (20,000 lb) 28,9 m/m ( fpm) kg (25,000 lb) 23,2 m/m (76 fpm) 13 8 kg (30,000 lb) 19,2 m/m (63 fpm) kg (35,000 lb) 16,5 m/m (54 fpm) kg (40,000 lb) 14,3 m/m (47 fpm) kg (45,000 lb) 12,8 m/m (42 fpm) 22 6 kg (,000 lb) 11,6 m/m (38 fpm) Wch Fourth layer pull Allowable cable pull Standard planetary and auxiliary planetary 2268 kg (00 lb) high speed 5117 kg (11,2 lb) low speed 5117 kg (11,2 lb) 5117 kg (11,2 lb) Loadle deduct Aux boom nose 36 kg ( lb) 7 USt Downhaul weight 78 kg (171 lb) 20 USt 1-sheave block 181 kg (400 lb) 40 USt 3-sheave block 272 kg (0 lb) USt 5-sheave block 498 kg (1098 lb)
8 Weights Standard NBT Configuration Weight and Center of Gravity (CG) estimates (see notes) Horizontal CG mm () Weight with fluids kg (lb) CWT Pned (# slabs) CWT Stowed (# slabs) NBT (13.7) (45,832) 2 0 NBT102 3 (31.6) (45,832) 1 1 NBT (49.9) (45,832) 0 2 NBT (24.3) (42,816) 1 0 NBT (43.8) (42,816) 0 1 NBT (39.8) 17,710 (39,044) 0 0 NBT (19.1) (48,142) 2 0 NBT (36.2) (48,142) 1 1 NBT (53.6) (48,142) 0 2 NBT (29.5) (45,126) 1 0 NBT (48.0) (45,126) 0 1 NBT (44.6) 18 8 (41,354) 0 0 Weight and CG Estimate Notes: 1. Information provided is for reference only. 2. Weight and CG data is applicable for a standard mache: 102 ft or 128 ft boom 2/3 part leblock cluded Ma hoist only (auxiliary hoist IPO CWT present) STD deckg with fixed access ladder No extension equipped No optional turret access step No auxiliary nose or optional hook blocks. 3. All counterweight configurations are shown table Pned = attached to cylders and turret ( use) Stowed = attached to torsion box (not use) 2 = Top and bottom slab(s) 1 =Top or bottom slab only 0 = No slab pned and/or stowed If both stowed and pned colums are 0 the counterweight is physically removed from the mache. IPO counterweight is also assumed removed this case (if no auxiliary hoist is equipped). For more formation about mountg configuration options, please contact the factory or your local National Crane dealer.
9 Dimensions 102 ft boom (376) Retracted 31 0 (1224) Extended 128 ft boom 9719 (383) Retracted (1536) Extended 2126 (84) 1542 (61) 3568 (140) 1942 (76) Chassis cab clearance 638 (25) Cwt 869 (34) Cwt 34 (144) 102 ft boom 4143 (163) 128 ft boom 4302 (169) Clamped stud connection (front only) HCG Welded/bolted shear plate connection 7261 (286) 3X Welded/bolted flex plate connection 3303 (130) C L Rotation 300 (12) 17 () 2946 (116) 1276 () C L Rotation 649 (26) 768 (30) S/S Hyd reservoir 449 (18) Front liftg lugs Rear liftg lugs Bolted structural bumper attached to truck frame 2126 (84) Top cwt slab (/) Bottom cwt slab () 0 (35) Max Chassis width
10 Workg range NBT: NBT/ ft ma 128 ft boom ma with boom, extension with extensions erected and retracted, 36, outriggers fully extended, 00 lb counterweight (Boom deflection not shown) 1 1 Offset 45' Ext. 1 3 Offset ' Ext. Height from ground Boom length and extension 32.5 Max boom angle Operatg radius from axis of rotation Axis of rotation (6' 9") (8' 7") Dimensions are for largest furnished hook block and headache ball with anti-two block activated.
11 NBT 39,0 m (128 ft) 2722 kg (00 lb) % # A 54-B 64-C -D 86-E 97-F 107-G 118-H 128,000 (68.1) 92,300 81,200,400 47,0 (40.3) 31,6 (21.8) (71.3) (68.5) (56.2) 37,0 30,200 22,300 (23.6) 40,3 (73.3) 40,3 40,3 38,1 (58.0) 30,0 (51.3) 25, (43.9) 20,0 (35.2) *16,400 40,300 (73.5) 40,300 37,1 31,000 25,3 21,0 (47.0) 16,9 (40.3) 13,0 (32.4) 11,0 (22.2) 34, (72.5) 30, 27, 24,0 21,3 (.1) 17,200 (.0) 14,1 (44.6) 11,8 (38.6) 10, (32.4) (23.9) *46 (9.2) 22,6 (71.5) 20,400 18,0 (64.3) 17,0 (.5) 15,0 (56.5) 14,400 (52.3) 12,0 (47.8) 10,300 (43.3) (37.9) 00 (31.8) 64 (24.3) *4400 (12.8) 17,0 (71.2) 16,300 15, (64.7) 14,000 (61.5) 12,8 (58.0) 12,000 (54.4) 10,4 (.8) 89 (46.6) 76 (42.1) 60 (37.2) (31.6) 40 (24.8) *38 (15.3) 14,0 13,6 12,5 11,0 10,9 (59.2) 10,300 (56.0) 9 (52.4) (48.7) (44.7) (40.5) 00 (35.8) 4300 (30.4) 30 *20 (14.9) 12,0 (73.2) 12,0 11,300 (68.2) 10,6 (.8) (63.2) 9400 (.4) 88 (57.5) 79 (54.3) 68 (51.0) (43.8) 44 (39.8) 30 (35.4) 3300 (30.5) 20 (24.6) 23 (16.8) 10,8 (73.0) 10,2 96 (.9) 78 (63.3) 00 (.6) 6300 (.0) 51 (52.1) 46 (49.0) 41 (45.7) 30 (42.2) 3300 (38.4) 28 (34.2) 24 (29.5) *10 (23.7) *1 (15.8) Mimum boom angle ( ) for dicated length (no load) Maximumboomlength (ft) at boom angle (no load) NOTE: ( ) Boom angles are degrees. *Loads are structurally limited. #LMI operatg code. Refer to LMI manual for operatg structions. 97 Liftg capacities at zero degree boom angle Boom angle A 54-B 64-C -D 86-E 12,0 (27.5) 70 (38.8) 48 (19.8) (81.8) NOTE: ( ) Reference radii
12 NBT Counterweight 39,0 m (128 ft) Jib Stowed 2722 kg (00 lb) % # A 54-B 64-C -D 86-E 97-F 107-G 118-H ,8 (68.1) 91,1,0 64,2 46,0 (40.3) 30,0 (21.8) (71.3) (68.5) (56.2) 36,0 29,400 21,0 (23.6) (73.3) 37,5 (58.0) 30, (51.3) 24,0 (43.9) 20, (35.2) 15,0 (73.5) 36,6 30,0 24,8 20,5 (47.0) 16,4 (40.3) 13,400 (32.4) 11, (22.2) 33,6 (72.5) 29,6 26,6 24,1 20,0 (.1) 16,0 (.0) 13,0 (44.6) 11,400 (38.6) 96 (32.4) 8 (23.9) *4200 (9.2) 22,2 (71.5) 20,000 18, (64.3) 16,6 (.5) 15,400 (56.5) 14,000 (52.3) 11,6 (47.8) 90 (43.3) 83 (37.9) 7 (31.8) (24.3) * (12.8) 17,4 (71.2) 15,9 14,0 (64.7) 13,6 (61.5) 12,0 (58.0) 11,6 (54.4) 10, (.8) 80 (46.6) 7300 (42.1) 62 (37.2) 53 (31.6) 45 (24.8) *30 (15.3) 14,400 13,3 12,2 11,4 10,6 (59.2) (56.0) 80 (52.4) 00 (48.7) 64 (44.7) 50 (40.5) 40 (35.8) (30.4) 3400 *20 (14.9) 12,0 (73.2) 11,0 11,000 (68.2) 10,3 (.8) 90 (63.2) 9 (.4) (57.5) 76 (54.3) (51.0) (43.8) 41 (39.8) 30 (35.4) (30.5) 20 (24.6) 20 (16.8) 10,0 (73.0) (.9) 70 (63.3) (.6) 54 (.0) 40 (52.1) 4400 (49.0) 30 (45.7) 34 (42.2) 30 (38.4) 20 (34.2) 2200 (29.5) *16 (23.7) *8 (15.8) Mimum boom angle ( ) for dicated length (no load) Maximumboomlength (ft) at boom angle (no load) NOTE: ( ) Boom angles are degrees. *Loads are structurally limited. #LMI operatg code. Refer to LMI manual for operatg structions. 97 Liftg capacities at zero degree boom angle Boom angle A 54-B 64-C -D 86-E 11,0 (27.5) 6,0 (38.8) 4,2 (19.8) 3,200 1,0 0 (81.8) NOTE: ( ) Reference radii
13 NBT 39,0 m (128 ft) 2722 kg (00 lb) % Over Rear # A 54-B 64-C -D 86-E 97-F 107-G 118-H 128,000 (68.1) 92,300 81,200,400 47,0 (40.3) 31,6 (21.8) (71.3) (68.5) (56.2) 37,0 30,200 22,300 (23.6) 40,3 (73.3) 40,3 40,3 38,1 (58.0) 30,0 (51.3) 25, (43.9) 20,9 (35.2) 16,400 40,300 (73.5) 40,300 37,1 (63.6) 31,000 (58.3) 25,3 (52.7) 21,2 (47.3) 18,000 (40.7) 15,2 (33.0) *11,0 (23.2) 34, (72.5) 30, 27, 24,0 21,0 (.1) 18,2 (.1) 15,0 (44.7) 13, (38.7) 11,200 (32.5) 90 (23.9) *46 (9.2) 22,6 (71.5) 20,400 (67.8) 18,0 17,0 (.4) 15,0 (56.4) 14,0 (52.1) 13,300 (47.6) 11,400 (42.8) 90 (37.4) 80 (31.3) 74 (23.8) *4400 (12.6) 17,0 (71.2) 16,300 15, (64.8) 14,000 (61.5) 12,8 (58.0) 12,000 (54.4) 11,2 (.5) 10, (46.8) (42.3) (31.7) (25.0) *38 (15.3) 14,0 13,6 12,5 11,0 10,9 (59.2) 10,300 (56.0) 90 (52.6) (48.9) (45.0) (40.7) 59 (36.0) 5200 (30.7) 45 (24.2) *20 (14.9) 12,0 (73.2) 12,0 11,300 (68.2) 10,6 (.8) (63.2) 9400 (.4) 88 (57.5) 8400 (54.5) (51.3) (47.8) (44.1) 5300 (40.1) 46 (35.7) 40 (30.8) 35 (24.9) *2400 (16.8) 10,8 (73.0) 10,2 96 (.9) 78 (63.3) 00 (.6) 6300 (.0) 51 (52.1) 46 (49.0) 41 (45.7) 30 (42.2) 3300 (38.4) (34.3) 26 (29.6) 10 (23.7) 1 (15.8) Mimum boom angle ( ) for dicated length (no load) Maximumboom length (ft) at boom angle (no load) NOTE: ( ) Boom angles are degrees. *Loads are structurally limited. #LMI operatg code. Refer to LMI manual for operatg structions. 97 Liftg capacities at zero degree boom angle Boom angle A 54-B 64-C -D 86-E 12,0 (27.5) 70 (38.8) 48 (19.8) (81.8) NOTE: ( ) Reference radii
14 NBT Counterweight 39,0 m (128 ft) Jib Stowed 2722 kg (00 lb) % Over Rear # A 54-B 64-C -D 86-E 97-F 107-G 118-H ,8 (68.1) 91,1,0 64,2 46,0 (40.3) 30,0 (21.8) (71.3) (68.5) (56.2) 36,0 29,400 21,0 (23.6) (73.3) 37,5 (58.0) 30, (51.3) 24,0 (43.9) 20,3 (35.2) 15,0 (73.5) 36,6 30,0 24,8 20,0 (47.0) 17,0 (40.3) 14,0 (32.4) *11,400 (22.2) 33,6 (72.5) 29,6 26,6 24,1 21,0 (.1) 17,0 (.1) 15,0 (44.7) 12,6 (38.7) 10,0 (32.5) 92 (23.9) *4200 (9.2) 22,2 (71.5) 20,000 18, (64.3) 16,6 (.5) 15,400 (56.5) 14,200 (52.1) 12,0 (47.6) 11,000 (42.8) 90 (37.4) 8200 (31.3) (23.8) * (12.6) 17,4 (71.2) 15,9 14,0 (64.8) 13,6 (61.5) 12,0 (58.0) 11,6 (54.4) 10,0 (.5) (46.8) 8400 (42.3) (31.7) 54 (25.0) *30 (15.3) 14,400 13,3 12,2 11,4 10,6 (59.2) (56.0) 9400 (52.6) 80 (48.9) 74 (45.0) (40.7) 56 (36.0) 40 (30.7) 42 (24.2) *20 (14.9) 12,0 (73.2) 11,0 11,000 (68.2) 10,3 (.8) 90 (63.2) 9 (.4) (57.5) 8 (54.5) 70 (51.3) 60 (47.8) (44.1) 00 (40.1) 43 (35.7) 30 (30.8) 32 (24.9) *2 (16.8) 10,0 (73.0) (.9) 70 (63.3) (.6) 54 (.0) 40 (52.1) 4400 (49.0) 30 (45.7) 34 (42.2) 30 (38.4) 20 (34.3) 2400 (29.6) 16 (23.7) 8 (15.8) Mimum boom angle ( ) for dicated length (no load) Maximumboom length (ft) at boom angle (no load) NOTE: ( ) Boom angles are degrees. *Loads are structurally limited. #LMI operatg code. Refer to LMI manual for operatg structions. 97 Liftg capacities at zero degree boom angle Boom angle A 54-B 64-C -D 86-E 11,0 (27.5) (38.8) 42 (19.8) (81.8) NOTE: ( ) Reference radii
15 NBT 7,9 m - 13,7 m (26 ft - 45 ft) kg (00 lb) 26 ft LENGTH 45 ft LENGTH 00 (72.6) 50 (69.0) 5200 (67.0) (62.9) 42 (.8) (56.4) 36 (54.1) 31 (51.5) 20 (48.6) 2 (45.7) 10 (42.6) 13 (39.4) 9 (35.9) 6 (32.1) 3 40 (72.1) (67.7) 41 (.4) (63.1) 30 (.7) 36 (58.3) 33 (.6) 20 (52.6) 25 (49.6) 2 (46.3) *16 (42.8) *0 (39.0) *8 (34.8) *4 (30.0) % 36 #0005 #0007 #0009 # (.4) 39 (67.2) 30 (.6) (59.9) (57.8) 20 (.6) 20 (53.5) 2300 (51.2) 20 (48.7) 10 (46.1) 10 (43.4) 0 (40.4) 0 6 (33.9) 3 20 (73.8) 20 (71.9) 26 (.0) (66.0) (61.8) 2400 (59.5) 23 (57.2) 2300 (54.7) 22 (52.1) 2000 (49.1) 10 (45.7) 12 (42.2) *0 (38.3) *0 (33.9) M. boom angle for dicated length (no load) Max. boom length at boom angle (no load) 64 ft 64 ft NOTE: ( ) Boom angles are degrees #LMI operatg code. Refer to LMI manual for structions. *Loads are structurally limited. Boom extension capacity notes: 1. All capacities above the bold le are based on structural strength limitations ft and 45 ft extension lengths may be used for sgle le liftg service. 3. Radii listed are for a fully extended boom with the boom extension erected. For ma boom lengths less than fully extended, the rated loads are determed by boom angle. Use only the column which corresponds to the boom extension length and offset for which the mache is configured. For boom angles not shown, use the ratg of the next lower boom angle. Warng: Operation of this mache with heavier loads than the capacities listed is strictly prohibited. Mache tippg with boom extension occurs rapidly and without advance warng. 4. Boom angle is the angle above or below horizontal of the longitudal axis of the boom base section after liftg rated load. 5. Capacities listed are with outriggers properly extended and vertical jacks set only.
16 NBT 7,9 m - 13,7 m (26 ft - 45 ft) 2722 kg (00 lb) % Over Rear ft LENGTH 45 ft LENGTH #0006 #0008 #0010 # (72.6) 50 (69.0) 5200 (67.0) (62.9) 42 (.8) (56.4) 36 (54.1) 31 (51.5) 20 (48.6) 2 (45.7) 10 (42.6) 13 (39.4) 9 (35.9) 6 (32.1) 3 40 (72.1) (67.7) 41 (.4) (63.1) 30 (.7) 36 (58.3) 33 (.6) 20 (52.6) 25 (49.6) 21 (46.3) 16 (42.8) 0 (39.0) 8 (34.8) 4 (30.0) 40 (.4) 39 (67.2) 30 (.6) (59.9) (57.8) 20 (.6) 20 (53.5) 2300 (51.2) 20 (48.7) 10 (46.1) 10 (43.4) 0 (40.4) 0 6 (33.9) 3 20 (73.8) 20 (71.9) 26 (.0) (66.0) (61.8) 2400 (59.5) 23 (57.2) 2300 (54.7) 22 (52.1) 2200 (49.3) 10 (45.9) 13 (42.3) 0 (38.3) 0 (33.9) M. boom angle for dicated length (no load) Max. boom length at boom angle (no load) 64 ft 64 ft NOTE: ( ) Boom angles are degrees #LMI operatg code. Refer to LMI manual for structions. Boom extension capacity notes: 1. All capacities above the bold le are based on structural strength limitations ft and 45 ft extension lengths may be used for sgle le liftg service. 3. Radii listed are for a fully extended boom with the boom extension erected. For ma boom lengths less than fully extended, the rated loads are determed by boom angle. Use only the column which corresponds to the boom extension length and offset for which the mache is configured. For boom angles not shown, use the ratg of the next lower boom angle. Warng: Operation of this mache with heavier loads than the capacities listed is strictly prohibited. Mache tippg with boom extension occurs rapidly and without advance warng. 4. Boom angle is the angle above or below horizontal of the longitudal axis of the boom base section after liftg rated load. 5. Capacities listed are with outriggers properly extended and vertical jacks set only.
17 NBT/ 39,0 m (128 ft) 1361 kg ( lb) % #0001 or # A 54-B 64-C -D 86-E 97-F 107-G 118-H 128,000 (68.1) 92,2, 63,4 46,300 31,6 (21.8) (71.3) (68.5) (56.2) 36,0 28,9 22,300 (23.6) 40,3 (73.3) 40,3 40,3 36,9 29,400 (51.2) 23,0 (43.8) 18,0 (35.2) 14,0 40,300 (73.5) 40,300 37,1 29,0 24,300 (53.0) 18,9 (47.0) 15,1 12,3 (32.4) 10,300 (23.3) 34, (72.5) 30, 27, 24,5 19,2 (.0) 15,4 (.0) 12,0 (44.5) 10,0 (39.2) 88 (32.3) 74 (23.8) *46 (9.2) 22,6 (71.5) 20,400 18,0 (64.3) 17,0 (.5) 15,6 (56.5) 12,0 (52.2) 10,0 (48.1) (43.2) 76 (37.8) (31.7) 50 (24.2) *4400 (12.8) 17,0 (71.2) 16,300 15, (64.8) 14,000 (61.5) 12,8 (58.0) 11,000 (54.6) 92 (.6) (46.4) 66 (41.9) 56 (37.0) 40 (31.4) 4 (24.7) 34 (15.2) 14,0 13,6 12,5 11,0 10,9 (59.2) 9400 (.8) 79 (52.2) (48.5) (44.5) (35.6) 35 (30.2) (23.8) 20 (14.8) 12,0 (73.2) 12,0 11,300 (68.2) 10,6 (.8) (63.2) 9400 (.4) 8 (57.3) (54.0) (.7) (47.2) 4300 (43.5) 36 (39.5) 3 (35.2) 20 (30.2) 21 (24.4) 10 (16.6) 10,8 (73.0) 10,2 96 (.9) 78 (63.3) 00 (.6) 6300 (.0) 51 (52.1) 4400 (48.9) 30 (45.5) 3200 (42.0) 20 (38.1) 22 (33.9) 10 (29.2) 14 (23.5) *1 (15.8) Mimum boom angle ( ) for dicated length (no load) Maximum boom length (ft.) at boom angle (no load) NOTE: ( ) Boom angles are degrees. *Loads are structurally limited. #LMI operatg code. Refer to LMI manual for operatg structions. 97 Liftg capacities at zero degree boom angle Boom angle A 54-B 64-C -D 86-E 12,0 (27.5) 70 (38.8) NOTE: ( ) Reference radii. 48 (19.8) (81.8) A
18 NBT/ Counterweight 39,0 m (128 ft) Jib Stowed 1361 kg ( lb) % #0002 or # A 54-B 64-C -D 86-E 97-F 107-G 118-H ,8 (68.1) 91, 78,9 62,300 45,1 30,0 (21.8) (71.3) (68.5) (56.2) 35,0 28,1 21,0 (23.6) (73.3) 36,3 28,0 (51.2) 23,300 (43.8) 18,000 (35.2) 14,200 (73.5) 36,6 29,200 23,0 (53.0) 18,4 (47.0) 14,6 11,8 (32.4) 90 (23.3) 33,6 (72.5) 29,6 26,6 24, 18,0 (.0) 15,000 (.0) 12,1 (44.5) 10,1 (39.2) 8400 (32.3) 00 (23.8) *4200 (9.2) 22,2 (71.5) 20,000 18, (64.3) 16,6 (.5) 15,2 (56.5) 12,400 (52.2) 10,400 (48.1) 86 (43.2) 72 (37.8) 6 (31.7) 5 (24.2) * (12.8) 17,4 (71.2) 15,9 14,0 (64.8) 13,6 (61.5) 12,0 (58.0) 10,6 (54.6) (.6) 74 (46.4) 6300 (41.9) 5300 (37.0) 44 (31.4) 30 (24.7) 3 (15.2) 14,400 13,3 12,2 11,4 10,6 (59.2) 9 (.8) 76 (52.2) (48.5) 50 (44.5) (35.6) 32 (30.2) 20 (23.8) 2200 (14.8) 12,0 (73.2) 11,0 11,000 (68.2) 10,3 (.8) 90 (63.2) 9 (.4) (57.3) 60 (54.0) 50 (.7) 40 (47.2) (43.5) 33 (39.5) 20 (35.2) 2300 (30.2) 18 (24.4) 14 (16.6) 10,0 (73.0) (.9) 70 (63.3) (.6) 54 (.0) 40 (52.1) 41 (48.9) 30 (45.5) 29 (42.0) 2,4 (38.1) 2000 (33.9) 15 (29.2) 0 (23.5) *8 (15.8) Mimum boom angle ( ) for dicated length (no load) Maximum boom length (ft) at boom angle (no load) NOTE: ( ) Boom angles are degrees. *Loads are structurally limited. #LMI operatg code. Refer to LMI manual for operatg structions. 97 Liftg capacities at zero degree boom angle Boom angle A 54-B 64-C -D 86-E 11,0 (27.5) (38.8) NOTE: ( ) Reference radii. 42 (19.8) (81.8) A
19 NBT/ 39,0 m (128 ft) 1361 kg ( lb) % Over Rear #0003 or # A 54-B 64-C -D 86-E 97-F 107-G 118-H 128,000 (68.1) 92,2, 63,4 46,300 31,6 (21.8) (71.3) (68.5) (56.2) 36,0 28,9 22,300 (23.6) 40,3 (73.3) 40,3 40,3 36,9 29,400 (51.2) 24,000 (43.8) 20,000 (35.2) 16,400 40,300 (73.5) 40,300 37,1 29,0 24,300 (53.0) 20,300 (47.0) 16,0 (40.3) 13,0 (32.4) 11,6 (22.2) 34, (72.5) 30, 27, 24,5 20,5 (.1) 17,0 (.0) 14,1 (44.6) 11,0 (38.6) 10,200 (32.4) 80 (23.9) *46 (9.2) 22,6 (71.5) 20,400 18,0 (64.3) 17,0 (.5) 15,0 (56.5) 14,3 (52.3) 12, (47.8) 10,400 (43.3) (38.0) 76 (31.8) 60 (24.3) *4400 (12.8) 17,0 (71.2) 16,300 15, (64.8) 14,000 (61.5) 12,8 (58.0) 12,000 (54.4) 10,5 (.8) (46.6) 78 (42.1) (37.2) 58 (31.6) 5 (24.9) *38 (15.3) 14,0 13,6 12,5 11,0 10,9 (59.2) 10,300 (56.0) 9200 (52.5) 79 (48.7) (44.8) 6,000 (40.5) 5200 (35.8) 40 (30.5) 30 (24.1) *20 (14.9) 12,0 (73.2) 12,0 11,300 (68.2) 10,6 (.8) (63.2) 9400 (.4) 88 (57.5) 8 (54.4) 00 (51.0) (43.8) 40 (39.8) (35.5) 34 (30.5) 29 (24.7) *2400 (16.8) 10,8 (73.0) 10,2 96 (.9) 78 (63.3) 00 (.6) 6300 (.0) 51 (52.1) 46 (49.0) 41 (45.7) 30 (42.2) 3300 (38.4) (34.3) 20 (29.5) *10 (23.7) *1 (15.8) Mimum boom angle ( ) for dicated length (no load) Maximum boom length (ft.) at boom angle (no load) NOTE: ( ) Boom angles are degrees. *Loads are structurally limited. #LMI operatg code. Refer to LMI manual for operatg structions. 97 Liftg capacities at zero degree boom angle Boom angle A 54-B 64-C -D 86-E 12,0 (27.5) 70 (38.8) NOTE: ( ) Reference radii. 48 (19.8) (81.8) A
20 NBT/ 39,0 m (128 ft) Jib Stowed 1361 kg ( lb) % Over Rear #0004 or # A 54-B 64-C -D 86-E 97-F 107-G 118-H ,8 (68.1) 91, 78,9 62,300 45,1 30,0 (21.8) (71.3) (68.5) (56.2) 35,0 28,1 21,0 (23.6) (73.3) 36,3 28,0 (51.2) 23,400 (43.8) 19,400 (35.2) 15,0 (73.5) 36,6 29,200 23,0 (53.0) 19,0 (47.0) 16,300 (40.3) 13,400 (32.4) 11,1 (22.2) 33,6 (72.5) 29,6 26,6 24, 20, (.1) 16,0 (.0) 13,0 (44.6) 11,4 (38.6) (32.4) 82 (23.9) *4200 (9.2) 22,2 (71.5) 20,000 18, (64.3) 16,6 (.5) 15,400 (56.5) 13,9 (52.3) 11,0 (47.8) (43.3) 80 (38.0) 72 (31.8) 6200 (24.3) * (12.8) 17,4 (71.2) 15,9 14,0 (64.8) 13,6 (61.5) 12,0 (58.0) 11,6 (54.4) 10,200 (.8) 80 (46.6) 00 (42.1) 6400 (37.2) 50 (31.6) 40 (24.9) *30 (15.3) 14,400 13,3 12,2 11,4 10,6 (59.2) (56.0) (52.5) 76 (48.7) 60 (44.8) (40.5) 40 (35.8) 4200 (30.5) 30 (24.1) *20 (14.9) 12,0 (73.2) 11,0 11,000 (68.2) 10,3 (.8) 90 (63.2) 9 (.4) (57.5) (54.4) (51.0) 00 (43.8) 4300 (39.8) 30 (35.5) 31 (30.5) 26 (24.7) *2 (16.8) 10,0 (73.0) (.9) 70 (63.3) (.6) 54 (.0) 40 (52.1) 4400 (49.0) 30 (45.7) 34 (42.2) 30 (38.4) 20 (34.3) 23 (29.5) *16 (23.7) *8 (15.8) Mimum boom angle ( ) for dicated length (no load) Maximumboomlength (ft) at boom angle (no load) NOTE: ( ) Boom angles are degrees. *Loads are structurally limited. #LMI operatg code. Refer to LMI manual for operatg structions. 97 Liftg capacities at zero degree boom angle Boom angle A 54-B 64-C -D 86-E 11,0 (27.5) 6,0 (38.8) NOTE: ( ) Reference radii. 4,2 (19.8) 3,200 1,0 0 (81.8) 0348A
21 NBT/ 7,9 m - 13,7 m (26 ft - 45 ft) 1361 kg ( lb) % ft LENGTH 45 ft LENGTH #0005 or #0007 or #0009 or #0011 or #5 #7 #9 # (72.6) 50 (69.0) 5200 (67.0) (62.9) 42 (.8) (56.2) (53.6) 24 (.9) 2,000 (48.2) 10 (45.3) 0 (42.2) 8 (39.0) 5 (35.6) 3 40 (72.1) (67.7) 41 (.4) (63.1) 30 (.7) 35 (58.2) 29 (.3) 24 (51.5) 19 (49.1) 10 (45.8) 1 (42.4) 0 (38.6) 40 (.4) 39 (67.2) 30 (.6) (59.9) (57.8) 20 (.6) 2400 (53.3) 2000 (.8) 16 (48.3) 1300 (45.6) 0 (42.8) 0 (39.8) 4 (36.7) 3 20 (73.8) 20 (71.9) 26 (.0) (66.0) (61.8) 2400 (59.5) 23 (57.2) 2200 (54.6) 10 (51.6) 14 (48.5) 10 (45.2) 0 (41.7) 0 (37.9) M. boom angle for dicated length (no load) Max. boom length at boom angle (no load) 64 ft 64 ft NOTE: ( ) Boom angles are degrees. 0347B #LMI operatg code. Refer to LMI manual for structions. Boom extension capacity notes: 1. All capacities above the bold le are based on structural strength limitations ft and 45 ft extension lengths may be used for sgle le liftg service. 3. Radii listed are for a fully extended boom with the boom extension erected. For ma boom lengths less than fully extended, the rated loads are determed by boom angle. Use only the column which corresponds to the boom extension length and offset for which the mache is configured. For boom angles not shown, use the ratg of the next lower boom angle. Warng: Operation of this mache with heavier loads than the capacities listed is strictly prohibited. Mache tippg with boom extension occurs rapidly and without advance warng. 4. Boom angle is the angle above or below horizontal of the longitudal axis of the boom base section after liftg rated load. 5. Capacities listed are with outriggers properly extended and vertical jacks set only.
22 NBT/ Counterweight 7,9 m - 13,7 m (26 ft - 45 ft) kg ( lb) 26 ft LENGTH 45 ft LENGTH #0006 #0008 #0010 # (72.6) 50 (69.0) 5200 (67.0) (62.9) 42 (.8) (56.4) 36 (54.1) 31 (51.5) 20 (48.6) 2 (45.7) 10 (42.6) 13 (39.4) 9 (35.9) 6 (32.1) 3 40 (72.1) (67.7) 41 (.4) (63.1) 30 (.7) 36 (58.3) 33 (.6) 20 (52.6) 25 (49.6) 21 (46.3) 16 (42.8) 0 (39.0) 8 (34.8) 4 (30.0) % Over Rear 40 (.4) 39 (67.2) 30 (.6) (59.9) (57.8) 20 (.6) 20 (53.5) 2300 (51.2) 20 (48.7) 10 (46.1) 10 (43.4) 0 (40.4) 0 6 (33.9) 3 20 (73.8) 20 (71.9) 26 (.0) (66.0) (61.8) 2400 (59.5) 23 (57.2) 2300 (54.7) 22 (52.1) 2 (49.2) 10 (45.8) *13 (42.3) *0 (38.3) *0 (33.9) M. boom angle for dicated length (no load) Max. boom length at boom angle (no load) 64 ft 64 ft NOTE: ( ) Boom angles are degrees. 0348A #LMI operatg code. Refer to LMI manual for structions. *Capacities are structurally limited. Boom extension capacity notes: 1. All capacities above the bold le are based on structural strength limitations ft and 45 ft extension lengths may be used for sgle le liftg service. 3. Radii listed are for a fully extended boom with the boom extension erected. For ma boom lengths less than fully extended, the rated loads are determed by boom angle. Use only the column which corresponds to the boom extension length and offset for which the mache is configured. For boom angles not shown, use the ratg of the next lower boom angle. Warng: Operation of this mache with heavier loads than the capacities listed is strictly prohibited. Mache tippg with boom extension occurs rapidly and without advance warng. 4. Boom angle is the angle above or below horizontal of the longitudal axis of the boom base section after liftg rated load. 5. Capacities listed are with outriggers properly extended and vertical jacks set only.
23 NBT/ Counterweight 39,0 m (128 ft) 0 kg (0 lb) % 36 8 # A 54-B 64-C -D 86-E 97-F 107-G 118-H 128,000 (68.1) , 76,0,0 44, 31,6 (21.8) (71.3) (68.5) (56.2) 34,2 26,0 19,5 (23.6) 40,3 (73.3) 40,3 40,3 34,0 27,4 (51.2) 20,200 (43.8) 15,4 (35.1) 12,1 (23.9) 40,300 (73.5) 40,300 35,0 27,0 20,5 (52.9) 15,0 (46.9) 12,0 (40.1) 10,200 (33.1) 8300 (23.3) 34, (72.5) 30, 27, 20,0 (59.6) 16, (54.9) 12,0 (49.8) 10,4 (45.0) (39.0) (32.2) (23.7) *46 (9.2) 22,6 (71.5) 20,400 18,0 (64.3) 16,3 (.5) 13,000 (56.3) 10,6 (52.5) (47.9) 72 (43.1) 00 (37.7) 00 (31.6) (12.7) 17,0 (71.2) 16,300 15, (64.8) 13,200 (61.4) 10,8 (58.1) 89 (54.3) 7400 (.4) 61 (46.2) 51 (41.7) 42 (36.8) 35 (31.2) 20 (24.5) 23 (15.0) 14,0 13,6 12,5 11,0 (61.9) 9 (58.9) (.4) 6300 (51.9) 52 (48.1) 4400 (44.2) 36 (39.9) (35.3) 24 (30.0) 19 (23.6) 10 (14.6) 12,0 (73.2) 12,0 11,300 (68.2) 10,6 (.8) 92 (63.0) 70 (59.9) 6400 (56.8) 53 (53.6) 40 (.3) 30 (46.8) 3 (43.1) 25 (39.1) 20 (34.8) 10 (29.9) 0 8 (16.2) 10,8 (73.0) 10,2 96 (.9) (63.3) (.5) 54 (57.6) 40 (54.6) 30 (51.6) 31 (48.4) 20 (45.0) 2 (41.5) 16 (37.7) 12 (33.5) 0 (28.7) 0 (23.1) Mimum boom angle ( ) for dicated length (no load) Maximum boom length (ft.) at boom angle (no load) NOTE: ( ) Boom angles are degrees. *Loads are structurally limited. #LMI operatg code. Refer to LMI manual for operatg structions. 97 Liftg capacities at zero degree boom angle Boom angle A 54-B 64-C -D 86-E 12,0 (27.5) 70 (38.8) 48 (19.8) (81.8) NOTE: ( ) Reference radii. 0349
24 NBT/ Counterweight 39,0 m (128 ft) Jib Stowed 0 kg (0 lb) % # A 54-B 64-C -D 86-E 97-F 107-G 118-H ,8 (68.1),9,4 59,4 42,9 30,0 (21.8) (71.3) (68.5) (56.2) 33,4 25,9 18,0 (23.6) (73.3) 34,1 26,8 (51.2) 19,0 (43.8) 14,8 (35.1) 11,5 (23.9) (73.5) 34,5 27,300 20,0 (52.9) 15,300 (46.9) 12,000 (40.1) 90 (33.1) (23.3) 33,6 (72.5) 29,6 26,6 20,4 (59.6) 15,6 (54.9) 12,3 (49.8) (45.0) 8 (39.0) 60 (32.2) 53 (23.7) *4200 (9.2) 22,2 (71.5) 20,000 18, (64.3) 15,9 (.5) 12,0 (56.3) 10,2 (52.5) 83 (47.9) 68 (43.1) 50 (37.7) 40 (31.6) 30 (12.7) 17,4 (71.2) 15,9 14,0 (64.8) 12,8 (61.4) 10,0 (58.1) 80 (54.3) (.4) (46.2) 40 (41.7) 30 (36.8) 3200 (31.2) 25 (24.5) 2000 (15.0) 14,400 13,3 12,2 10,0 (61.9) 80 (58.9) 72 (.4) 00 (51.9) 49 (48.1) 4 (44.2) 33 (39.9) 20 (35.3) 21 (30.0) 16 (23.6) 0 (14.6) 12,0 (73.2) 11,0 11,000 (68.2) 10,3 (.8) 89 (63.0) 7400 (59.9) 6 (56.8) (53.6) 4200 (.3) 34 (46.8) 20 (43.1) 22 (39.1) 10 (34.8) 1300 (29.9) 0 5 (16.2) 10,0 (73.0) (.9) (63.3) 6300 (.5) 5200 (57.6) 43 (54.6) 35 (51.6) 20 (48.4) 23 (45.0) 18 (41.5) 1400 (37.7) 0 (33.5) 6 (28.7) Mimum boom angle ( ) for dicated length (no load) Maximum boom length (ft) at boom angle (no load) NOTE: ( ) Boom angles are degrees. *Loads are structurally limited. #LMI operatg code. Refer to LMI manual for operatg structions. 97 Liftg capacities at zero degree boom angle Boom angle A 54-B 64-C -D 86-E 11,0 (27.5) 6,0 (38.8) 4,2 (19.8) 3,200 1,0 0 (81.8) NOTE: ( ) Reference radii. 0346
25 NBT/ 39,0 m (128 ft) 0 kg (0 lb) % Over Rear # A 54-B 64-C -D 86-E 97-F 107-G 118-H 128,000 (68.1) 92, 76,0,0 44, 31,6 (21.8) (71.3) (68.5) (56.2) 34,2 27,0 21,0 (23.6) 40,3 (73.3) 40,3 40,3 34,0 27,0 (51.2) 22,3 (43.8) 17,5 (35.2) 14, 40,300 (73.5) 40,300 35,0 27,0 22,6 (53.0) 17,0 (46.9) 14,4 11,8 (32.3) 99 (23.3) 34, (72.5) 30, 27, 22,0 (59.7) 18,1 (54.9) 14,0 (49.9) 12, (44.5) 10,200 (39.1) (32.3) 72 (23.8) *46 (9.2) 22,6 (71.5) 20,400 18,0 (64.3) 17,0 (.5) 14,0 (56.5) 12,300 (52.2) 10,400 (48.1) (43.2) 7400 (37.8) 6300 (31.7) 53 (24.2) *4400 (12.8) 17,0 (71.2) 16,300 15, (64.8) 14,000 (61.5) 12,4 10,5 (54.5) (.6) (46.4) 64 (41.9) 50 (37.0) 40 (31.4) (24.7) 33 (15.2) 14,0 13,6 12,5 11,0 10,0 (59.1) (.7) 70 (52.2) (48.4) 50 (44.5) 40 4 (35.5) 34 (30.2) 20 (23.8) 24 (14.8) 12,0 (73.2) 12,0 11,300 (68.2) 10,6 (.8) (63.2) 9200 (.3) 78 (57.2) (54.0) (.7) 40 (47.2) 4200 (43.5) 35 (39.5) (35.1) 25 (30.2) 2 (24.4) 10 (16.5) 10,8 (73.0) 10,2 96 (.9) 78 (63.3) 00 (.6) 6300 (.0) 00 (52.0) 4300 (48.8) 36 (45.5) 3 (41.9) 20 (38.1) 21 (33.9) 10 (29.1) 1400 (23.5) *1 (15.8) Mimum boom angle ( ) for dicated length (no load) Maximumboomlength (ft) at boom angle (no load) NOTE: ( ) Boom angles are degrees. *Loads are structurally limited. #LMI operatg code. Refer to LMI manual for operatg structions. 97 Liftg capacities at zero degree boom angle Boom angle A 54-B 64-C -D 86-E 12,0 (27.5) 70 (38.8) 48 (19.8) (81.8) NOTE: ( ) Reference radii. 0349
26 NBT/ Counterweight 39,0 m (128 ft) Jib Stowed 0 kg (0 lb) % Over Rear # A 54-B 64-C -D 86-E 97-F 107-G 118-H ,8 (68.1),9,4 59,4 42,9 30,0 (21.8) (71.3) (68.5) (56.2) 33,4 26,2 20,9 (23.6) (73.3) 34,1 26,0 (51.2) 21,0 (43.8) 16,9 (35.2) 13,0 (73.5) 34,5 27,300 22,1 (53.0) 17,400 (46.9) 13,9 11,3 (32.3) 94 (23.3) 33,6 (72.5) 29,6 26,6 22,4 (59.7) 17,0 (54.9) 14,2 (49.9) 11,6 (44.5) (39.1) 8 (32.3) (23.8) *4200 (9.2) 22,2 (71.5) 20,000 18, (64.3) 16,6 (.5) 14,0 (56.5) 11,0 (52.2) (48.1) 83 (43.2) 00 (37.8) (31.7) 49 (24.2) * (12.8) 17,4 (71.2) 15,9 14,0 (64.8) 13,6 (61.5) 12, 10,200 (54.5) (.6) 7200 (46.4) 6 (41.9) 51 (37.0) 43 (31.4) 36 (24.7) (15.2) 14,400 13,3 12,2 11,4 10,400 (59.1) (.7) 7400 (52.2) 62 (48.4) 5300 (44.5) (35.5) 31 (30.2) 20 (23.8) 21 (14.8) 12,0 (73.2) 11,0 11,000 (68.2) 10,3 (.8) 90 (63.2) (.3) (57.2) 6400 (54.0) 54 (.7) 40 (47.2) 30 (43.5) 32 (39.5) 20 (35.1) 22 (30.2) 10 (24.4) 1400 (16.5) 10,0 (73.0) (.9) 70 (63.3) (.6) 54 (.0) 40 (52.0) 40 (48.8) 3400 (45.5) 28 (41.9) 23 (38.1) 10 (33.9) 10 (29.1) 11 (23.5) *8 (15.8) Mimum boom angle ( ) for dicated length (no load) Maximumboomlength (ft.) at boom angle (no load) NOTE: ( ) Boom angles are degrees. *Loads are structurally limited. #LMI operatg code. Refer to LMI manual for operatg structions. 97 Liftg capacities at zero degree boom angle Boom angle A 54-B 64-C -D 86-E 11,0 (27.5) (38.8) 42 (19.8) (81.8) NOTE: ( ) Reference radii. 0349
27 NBT/ Counterweight 7,9 m - 13,7 m (26 ft - 45 ft) kg (0 lb) 26 ft LENGTH 45 ft LENGTH 00 (72.6) 50 (69.0) 5200 (67.0) (62.9) 30 (.5) (58.0) 2400 (.4) 10 (52.8) 14 (.2) 0 (47.4) 6 (44.5) % 36 #05 #07 #09 # (72.1) (67.7) 41 (.4) 30 (63.0) 30 (.2) 2400 (57.3) 19 (54.5) 14 (51.5) 0 (48.4) 6 (45.2) 40 (.4) 39 (67.2) 30 (.6) (61.8) 20 (59.4) 22 (57.1) 10 (54.7) 14 (52.3) 1 (49.8) 0 (47.2) 4 (44.5) 3 20 (73.8) 20 (71.9) 26 (.0) (66.0) (61.8) 2200 (59.3) 10 (56.5) 13 (53.7) 0 (.7) 6 (47.7) M. boom angle for dicated length (no load) Max. boom length at boom angle (no load) 64 ft 64 ft NOTE: ( ) Boom angles are degrees #LMI operatg code. Refer to LMI manual for structions. Boom extension capacity notes: 1. All capacities above the bold le are based on structural strength limitations ft and 45 ft extension lengths may be used for sgle le liftg service. 3. Radii listed are for a fully extended boom with the boom extension erected. For ma boom lengths less than fully extended, the rated loads are determed by boom angle. Use only the column which corresponds to the boom extension length and offset for which the mache is configured. For boom angles not shown, use the ratg of the next lower boom angle. Warng: Operation of this mache with heavier loads than the capacities listed is strictly prohibited. Mache tippg with boom extension occurs rapidly and without advance warng. 4. Boom angle is the angle above or below horizontal of the longitudal axis of the boom base section after liftg rated load. 5. Capacities listed are with outriggers properly extended and vertical jacks set only.
28 NBT/ 7,9 m - 13,7 m (26 ft - 45 ft) kg (0 lb) 26 ft LENGTH 45 ft LENGTH #06 #08 #10 #12 00 (72.6) 50 (69.0) 5200 (67.0) (62.9) 42 (.8) (56.1) 20 (53.6) 2400 (.9) 10 (48.1) 10 (45.2) 11 (42.2) 0 (39.0) 0 (35.5) % Over Rear 3 40 (72.1) (67.7) 41 (.4) (63.1) 30 (.7) 34 (58.1) 28 (.2) 23 (52.2) 19 (49.1) 14 (45.8) 10 (42.3) 0 (38.6) 400 (34.5) 40 (.4) 39 (67.2) 30 (.6) (59.9) (57.8) 20 (.6) 2300 (53.2) 10 (.7) 15 (48.1) 12 (45.5) 9 (42.7) 6 (39.7) 4 (36.7) 3 20 (73.8) 20 (71.9) 26 (.0) (66.0) (61.8) 2400 (59.5) 23 (57.2) 21 (54.5) 10 (51.5) 1400 (48.5) 10 (45.2) 0 (41.7) 4 (37.9) M. boom angle for dicated length (no load) Max. boom length at boom angle (no load) 64 ft 64 ft NOTE: ( ) Boom angles are degrees #LMI operatg code. Refer to LMI manual for structions. *Capacities are structurally limited. Boom extension capacity notes: 1. All capacities above the bold le are based on structural strength limitations ft and 45 ft extension lengths may be used for sgle le liftg service. 3. Radii listed are for a fully extended boom with the boom extension erected. For ma boom lengths less than fully extended, the rated loads are determed by boom angle. Use only the column which corresponds to the boom extension length and offset for which the mache is configured. For boom angles not shown, use the ratg of the next lower boom angle. Warng: Operation of this mache with heavier loads than the capacities listed is strictly prohibited. Mache tippg with boom extension occurs rapidly and without advance warng. 4. Boom angle is the angle above or below horizontal of the longitudal axis of the boom base section after liftg rated load. 5. Capacities listed are with outriggers properly extended and vertical jacks set only.
National Crane Series NBT60 Product Guide
National Crane Series NBT Product Guide ASME B30.5 Imperial % Features 39,01 m (128 ft) five-section full power boom 54,4 t ( USt) at 2,44 m (8 ft) Self-lubricatg Easy Glide wear pads Hydraulically removable
More informationNTC55 Product Guide. Features. ASME B30.5 Imperial 85% 49,9 t (55 USt) capacity at 2,44 m (8 ft)
NTC Product Guide ASME B30.5 Imperial % Features 49,9 t ( USt) capacity at 2,44 m (8 ft) 39,01 m (128 ft) five-section, full-power boom Hydraulically removable counterweight system with multiple configurations
More informationThree-position, out and down style outriggers with lighter polymeric floats
NBT-1 Capacity: USt (36,3 t) ratg Boom: 142 ft (43,3 m) five-section boom Max tip height ma boom: 1 ft (45,72 m) Max tip height ma boom with jib: 4 ft (62,2 m) Several boom length options providg work
More informationLOAD CHARTS NTC55 85% STABILITY ON OUTRIGGERS
LOAD CHARTS NTC 5% STABILITY ON OUTRIGGERS 0443 SERIAL NUMBER GA24146 1 TABLE OF CONTENTS GENERAL NOTES... 6-7 WT. REDUCTIONS / LINE PULLS & REEVING INFO / HOIST PERFORMANCE... LIFTING AREA DIAGRAM / BASKET
More informationLOAD CHARTS NBT45 85% STABILITY ON OUTRIGGERS
LOAD CHARTS NBT45 85% STABILITY ON OUTRIGGERS 295995 SERIAL NUMBER 1 2 TABLE OF CONTENTS GENERAL NOTES...4-5 LIFTING AREA DIAGRAM / LINE PULLS & REEVING INFO / HOIST PERFORMANCE... 6 RANGE DIAGRAM w/ EXTENSION...7
More informationNational Crane Series NBT45 Product Guide
National Crane Series NBT45 Product Guide ASME B.5 Imperial 85% Features,8 t (45 USt) ratg 49,1 m (161 ft) five-section boom Self-lubricatg Easy Glide wear pads 41 kg ( lb) tailswg counterweight Features
More informationNational Crane Series NBT45 Product Guide
National Crane Series NBT45 Product Guide ASME B.5 Imperial 85% Features,8 t (45 USt) ratg 49,1 m (161 ft) five-section boom Self-lubricatg Easy Glide wear pads 41 kg ( lb) tailswg counterweight Features
More informationNational Crane Series NBT40
National Crane Series NBT40 Product Guide Features 36,3 t (40 USt) ratg 43,3 m (142 ft) five-section boom Self-lubricatg Easy Glide wear pads 862 kg (1900 lb) tailswg counterweight Features National Crane
More informationTMS500E. product guide. contents. features 40 ton (40 mt) Capacity. Truck Mounted Crane
TMS0E product guide features ton ( mt) Capacity 29 ft.-95 ft. (8.8-29 m) 4 section, full power sequenced synchronized boom 26 ft.- ft. (7.9-13.7 m) offsettable telescopic swingaway extension Optional 26
More informationTMS500E. product guide. contents. features 40 ton (40 mt) Capacity. Truck Mounted Crane
product guide features ton ( mt) Capacity 29 ft.-95 ft. (8.8-29 m) 4 section, full power synchronized boom 26 ft.- ft. (7.9-13.7 m) offsettable telescopic swingaway extension Optional 8,4 lb. (3837 kg)
More informationBoom truck 36 tons. national series BOOM LENGTHS: 31ft to 127ft JIB LENGTHS: 31ft JIB OFFSETS:
Boom truck 3 tons national series : ft to 7ft JIB : ft JIB OFFSETS: NOTES: portland office: 53.23.11 seattle office: 2.74.4 features Why Buy a National Crane Series? 3 USt (32. t) Rating The provides a
More informationNational Crane Series NBT50
National Crane Series NBT50 Preliminary Product Guide Features 31,1 m (102 ft) four-section full power boom and optional 39,01 m (128 ft) five-section full power boom 45,36 t (50 USt) at 2,44 (8 ft) and
More informationROUGH TERRAIN HYDRAULIC CRANE RT875BXL
ROUGH TERRAIN HYDRAULIC CRANE RT875BXL Dimensions TAILSWING 14' (4280) 24' (7315) 10' 4" (31) TRACK 8' 4-1/2" (2553) 17' 4" (5283) 26' 6-1/2" (8090) 24' 11" (7595) 43' (13 106) 1' 3" (381) 7' 3" (2210)
More informationNational Crane Series NBT50
National Crane Series NBT50 Preliminary Product Guide Features 31,1 m (102 ft) four-section full power boom and optional 39,01 m (128 ft) five-section full power boom 45,36 t (50 USt) at 2,44 (8 ft) and
More informationproduct guide contents features 40 ton (40 mt) Capacity Truck Mounted Crane 29 ft.-95 ft. ( m) 4 section, full power synchronized boom
product guide features ton ( mt) Capacity 29 ft.-95 ft. (8.8-29 m) 4 section, full power synchronized boom 26 ft.- ft. (7.9-13.7 m) offsettable telescopic swingaway extension Optional 8,4 lb. (3837 kg)
More information24,000 lb. ( kg) counterweight with hydraulic removal system. Cummins ISM 450, six cylinder after cooled 450 hp (336 kw)
product guide features 41-128 ft. (12.6-39 m) 4 section full power Mega Form boom 33-56 ft. (10-17 m) manual offset bi-fold swingaway 2 x 20 ft. intermediate lattice inserts 24,000 lb. (10 886 kg) counterweight
More informationRT535E. product guide. contents. features 35 ton (35 mt) capacity. Rough Terrain Hydraulic Crane. Features 2. Specifications 3.
product guide contents Features 2 features 35 ton (35 mt) capacity 32-102 ft. (9.8-31.0 m) 4-section full power boom 26-45 ft. (7.6-13.7 m) offsettable telescopic swingaway extension Dual-Axis electric
More information30' BOOM 13' 8" (4166) 24' BOOM 11' 8" (3556) 1' 8-1/2" (521) 3' 8-1/2" (1129) 15' 9-1/2" (4813) 17' 9-1/2" (5421)
INDUSTRIAL CRANE Dimensions 10' 10" (3302) 9' 4" (2845) 6' (1829) TRACK 7' (2134) A B 24' BOOM 11' 8" (3556) 1' 8-1/2" (521) 30' BOOM 13' 8" (4166) 3' 8-1/2" (1129) C 15' 9-1/2" (4813) 17' 9-1/2" (5421)
More informationDimensions Turning Radius (6.4m) 2 Wheel Steer /2 (3.6m) 4 Wheel Steer
INDUSTRIAL CRANE Dimensions Turng 20 11 (6.4m) 2 Wheel Steer 11 10-1/2 (3.6m) 4 Wheel Steer 14'0" 14 0 (4267) (4267) 12' 1-3/4" (3.7m) 7' 8-1/2" (2350) 6' 3-1/4" (1911) TAILSWING Note: ( ) Reference dimensions
More informationrough Terrain crane 60 tons
rough Terrain crane 60 tons grove rt700e BOOM LENGTHS: 36 to 110 ft JIB LENGTHS: 33 to 56 ft JIB OFFSETS: 0-25 - 45 NOTES: Specifications Superstructure Boom 11 m - 33,5 m (36 ft - 110 ft) four-section,
More informationRT530E. product guide. contents. features 30 ton (30 mt) capacity. Rough Terrain Hydraulic Crane. Features 2. Specifications 3.
RT5E product guide contents Features 2 features ton ( mt) capacity 29-95 ft. (8.8-29 m) 4-section full power boom 26- ft. (7.9-13.7 m) telescopic swingaway extension Max main boom tip height of 2.5 ft.
More informationGrove TMS700E. Product Guide. Features. 50 t or 55 t (50 USt or 60 USt) capacity
Grove TMS700E Product Guide Features 50 t or 55 t (50 USt or 60 USt) capacity 11 m 33,5 m (36 ft 1 ft) four-section, full power sequenced synchronized boom,1 m 17 m (33 ft 56 ft) offsettable bi-fold lattice
More informationNational Crane Series NBT30H
National Crane Series NBT30H Product Guide Features 27,2 t (30 USt) rating 33,52 m (110 ft) four-section boom All new design Multi-position Easy Reach control panel Graphical LMI Features National Crane
More informationRT530E-2. product guide. contents. features. Rough Terrain Hydraulic Crane. Features 2. Specifications ton (27 mt) capacity.
RT5E-2 product guide contents Features 2 features ton (27 mt) capacity 29 ft. - 95 ft. (8.8 m -29.0 m) 4-section full power boom 26 ft. - ft. (7.9 m - 13.7 m) offsettable telescopic swing-away extension
More informationSeries 1300A. product guide. contents. features. All New Design. Features ' Four-Section Boom. Mounting Configurations 3.
Series product guide features All New Design 110' Four-Section Boom 30 Ton Rating Self-lubricating Easy Glide Wear Pads Internal Anti-twoblock NEW VISION CAB contents Features 2 Mounting Configurations
More informationNational Crane Series NBT36
National Crane Series NBT36 Product Guide Features 32,7 t (36 USt) rating 38,7 m (127 ft) five-section boom Self-lubricating Easy Glide wear pads Features National Crane Series NBT36 32,7 t (36 USt) maximum
More informationTMS x 4 & 6 x 6
TMS5 6 x 4 & 6 x 6 Dimensions 8' (2438) TAILSWING 11' 1" (3383) 7' 8" (2337) RET 13' 9-3/4" (4210) MID EXT ' (96) EXT Note: ( ) Reference dimensions in mm 16-3/4" (425) 43' 4" (13 8) OVERALL 10' 10" (32)
More informationRT540E. product guide. contents. features. Rough Terrain Hydraulic Crane. Features 2. Specifications 3. Dimensions ton (35 mt) capacity
RT5E product guide contents Features 2 features ton ( mt) capacity 32 ft. - 2 ft. (9.8 m -31.0 m) 4-section, full power boom 26 ft. - ft. (7.9 m - 13.7 m) offsettable telescopic swing-away extension Full
More informationfeatures also available.
features 2 The boom on the is a 29-95 ft. (8.8-29 m) four-section full power boom with a maximum tip height of 2.5 ft. (31.2 m). This synchronized boom uses a single lever joystick control to extend boom
More informationWORKING RANGE DIAGRAM
Working Range Bi-fold Swingaway 36-110 ft. (11-33.5 m) 33-56 ft. (10.1-17.1 m) 12,1 lbs. (5511 kg) 100% 360 WORKING RANGE DIAGRAM 180 170 160 1 (BOOM DEFLECTION NOT SHOWN) 40 D6-829-101026 0 25 56' 33'
More informationTire Size 26.5 x 25 5' 5-1/2" (1661) 12' 2-1/4" (3715)
Dimensions 11' 13' 4" (64) TAILSWING 9' " (2997) OVER FENDERS 22' (66) FULL EXT 15' 9" (4801) MID EXT 9' 3-1/2" (2832) RET 9' 9-1/2" (2985) O/R A B C D E F G H 23.5 x 25 5' 4-1/4" (1631) 11' 11-1/2" (36)
More informationRT875E. product guide. contents
product guide contents Features 2 Specifications 3 Dimensions 5 Working Range 6 Bifold Load Charts 7 features 75 ton (68 mt) capacity 41 ft-128 ft (12.6 m-39.0 m) 4 section, full power boom 33 ft-56 ft
More informationRT875E. product guide. contents
product guide contents Features 2 Specifications 3 Dimensions 5 Working Range 6 Bifold Load Charts 7 features 75 ton (68 mt) capacity 41 ft-128 ft (12.6 m-39.0 m) 4 section, full power boom 33 ft-56 ft
More informationRT875E. product guide. contents
product guide contents Features 2 Specifications 3 Dimensions 5 Working Range 6 Bifold Load Charts 7 features 75 ton (68 mt) capacity 41 ft-128 ft (12.6 m-39.0 m) 4 section, full power boom 33 ft-56 ft
More informationGIUFFRE.COM. National Crane 500E2 Series GIUFFRE BROS CRANES INC. Product Guide
National Crane 5E2 Series Product Guide Features 16,3 t (18 USt) rating 21,6 m (71 ft) three-section boom Self-lubricating Easy Glide wear pads Internal anti-two block Features National Crane Series 5E2
More informationWorking Range GROVE MODEL TM TON CAPACITY. LIFTING CHARTS - Hydraulic Truck Cranes 9'-7"
LIFTING CHARTS - Hydraulic Truck Cranes GROVE MODEL - TON CAPACITY Working Range 42-1 ft. (12.8-39.6 m) 33-58 ft. (10.0-17.7 m) 3 FEET 210 200 1 58 48 1 1 33 1 1 1 1 1 115 85 20 10 0 20 10 0 1 1 1 1 1
More informationRT700E. product guide. contents
product guide contents Features 2 Specifications 3 Dimensions 5 Working Range 6 features -60 ton (-55 mt) capacity 36 ft-110 ft (11 m-33.5 m) 4 section, full power boom 33 ft (10.1 m) offsettable lattice
More information43' (13.07) 18' 4" (5.59 ) 18' 6" (5.64) Turning Radius: TMS870-45' 1" (13.7 m) TTS870-29' 8" (9.04 m) (8 wheel)
Dimensions 14' 1/2" (4.28) TAILSWING 7' 7" (2.77) O/R RET. 8' 6" (2.59) 15' 5" (5.64) O/R PART. EXTENDED 24' (7.31) ' 6" (4.5) RETRACTED 137' 9" (1653.62) EXTENDED 43' (13.07) 11' 8-1/4" (3.56) 1' 8" (0.53)
More informationTMS900E. product guide. contents. features 90 ton (80 mton) capacity. Truck Crane ft ( m) 5 section full power boom
features 90 ton (80 mton) capacity 37-142 ft (11.2-43.2 m) 5 section full power boom Patented TWIN-LOCK boom pinning system 33-56 ft (10-17m) bifold lattice swingaway extension Optional 33-56 ft (10-17
More informationRT600E. product guide. contents
product guide contents Features 2 features 33-5 ft. (-32 m) 4-section full power boom 29-51 ft. (8.8-15.5 m) telescopic swingaway extension Max main boom tip height of 112 ft. (34 m) E Series cab Max overall
More informationRT700E. product guide. contents
product guide contents Features 2 Specifications 3 Dimensions 5 Working Range 6 features - ton (-55 mt) capacity 36 ft-1 ft (11 m-33.5 m) 4 section, full power boom 33 ft (.1 m) offsettable lattice swingaway
More informationNational Crane Series NBT45
National Crane Series NBT45 Product Guide Features ř 40,8 t (45 USt) rating ř 43,3 m (142 ft) five-section boom ř Self-lubricating Easy Glide wear pads ř 2041 kg (4500 lb) tailswing counterweight Features
More informationGrove RT890E. Introduced: Capacity: 90 US (80 Metric) Tons
Grove E Introduced: 2003 Capacity: 90 US (80 Metric) Tons Dimensions OAL: 45 FT. 3 IN. (13.8M) CHASSIS LENGTH: 28 FT. 0 IN. (8.5M) OAW: 10 FT. 11 IN. (3.3M) OAH: 12 FT. 4 IN. (3.7M) Boom Standard 5 section
More informationNational Crane Series 800H
National Crane Series 8H Data Sheet Features 3,48 m (1 ft) four-section boom 2,86 t (23 USt) rating Self-lubricating Easy Glide wear pads Dimensions 85 mm (31.69") 247 mm (94.") Maximum transport width
More informationTMS9000E Product Guide
TMS9000E Product Guide Features 90 t (110 USt) capacity 11,2 m - 43,4 m (36 ft - 142 ft) five-section full power boom Patented TWIN-LOCK boom pinning system 10 m - 17 m (33 ft - 56 ft) bi-fold lattice
More informationTMS700E. product guide. contents. features 50 or 60 ton (50 or 55 mt) Capacity. Truck Mounted Hydraulic Crane. Features 2
TMS0E product guide features or ton ( or mt) Capacity 36 ft.-1 ft. (11-33.5 m) 4 section, full power sequenced synchronized boom 33 ft.-56 ft. (.1-17 m) offsettable bi-fold lattice swingaway extension
More informationTMS900E. product guide. contents. features 90 ton (80 mton) capacity. Truck Crane ft ( m) 5 section full power boom
features 90 ton (80 mton) capacity 37-142 ft (11.2-43.2 m) 5 section full power boom Patented TWIN-LOCK boom pinning system 33-56 ft (10-17m) bifold lattice swingaway extension Optional 33-56 ft (10-17
More informationNational Crane Series NBT15
National Crane Series NBT15 Product Guide Features 13,4 t (15 USt) rating 18,3 m (60 ft) three-section boom Self-lubricating Easy Glide wear pads Internal anti-two block Load sense hydraulics Radio remote
More informationCROSSOVER T capacity class Boom truck crane Datasheet imperial
80T capacity class Boom truck crane Datasheet imperial Features 80 ton rated capacity @ 10 ft from center of rotation 126 ft maximum boom length 135 ft maximum tip height 33/57 ft optional jib 190 ft maximum
More informationRT100 ROUGH TERRAIN CRANE DATASHEET - IMPERIAL. Features:
ROUGH TERRAIN CRANE DATASHEET - IMPERIAL Features: Rated capacity: 100 ton @ 10 ft working radius Maximum boom length: 174 ft Maximum tip height: 183 ft Maximum hook height: 174.5 ft CONTENTS Key............................................................................................
More information600H Product Guide. Features. ASME B30.5 Imperial 85% Standard RCL System. 18,1 t (20 USt) rating
6H Product Guide ASME B3.5 Imperial 85% Features 18,1 t (2 USt) rating Five boom options available from 15 m (49 ft) to 27,42 m (9 ft) Multiple outrigger positions Standard RCL System Internal anti-two
More informationTRUCK MOUNTED HYDRAULIC CRANE
TRUCK MOUNTED HYDRAULIC CRANE Dimensions STEERING RADIUS 34' 10" (10617mm) C L ROTATION 12' 0" TAILSWING (3657 mm) 8' 4.0" (25 mm) 6' 10.69" (2100 mm) FRONT TRACK 6' 0.3" (1837 mm) REAR TRACK 7' 10" (23
More informationPRELIMINARY CROSSOVER T capacity class Boom Truck Crane Datasheet imperial. View thousands of Crane Specifications on FreeCraneSpecs.
80T capacity class Boom Truck Crane Datasheet imperial PRELIMINARY Features 80 ton rated capacity @ 10 ft from center of rotation 126 ft maximum boom length 135 ft maximum tip height 33/57 ft optional
More informationLOAD CHARTS MANTIS 6010LP 30 TON TELE-BOOM CRAWLER CRANE 1 V FT MAIN BOOM, 20 FT EXTENSION & 20 FT JIB
0 FT MAIN BOOM, FT EXTENSION & FT JIB in in in in 1 LIFTING CAPACITIES IN THOUSANDS OF POUNDS; 3, % OF TIPPING, FIRM & LEVEL GROUND MAIN BOOM with TRACKS FULLY EXTENDED 11,0 lb COUNTERWEIGHT ZERO COUNTERWEIGHT
More informationLOAD CHARTS TMS9000E 85% STABILITY SERIAL NUMBER
LOAD CHARTS TMS9000E 85% STABILITY SERIAL NUMBER TMS9000E - S/N 1 TMS9000E - S/N 2 CONTENTS GENERAL NOTES...11 WEIGHT REDUCTIONS AND WARNING NOTES... 12 COUNTERWEIGHT CONFIGURATIONS... 13-15 LIFTING AREA
More informationSeries 1400A Hydraulic Crane 33 Ton
Series 1A Hydraulic Crane 33 Ton Load Ratings DANGER AN UNTRAINED OPERATOR SUBJECTS HIMSELF AND OTHERS TO DEATH OR SERIOUS INJURY YOU MUST NOT OPERATE THIS CRANE UNLESS You have been trained in the safe
More informationSeries 1400 Hydraulic Crane 33 Ton Load Ratings
Series 1 Hydraulic Crane 33 Ton Load Ratings! DANGER AN UNTRAINED OPERATOR SUBJECTS HIMSELF AND OTHERS TO DEATH OR SERIOUS INJURY YOU MUST NOT OPERATE THIS CRANE UNLESS You have been trained in the safe
More informationCROSSOVER 8000 CROSSOVER T capacity class Boom Truck Crane Datasheet imperial. Features
80T capacity class Boom Truck Crane Datasheet imperial PRE AR N I M LI Y Features 80 ton rated capacity @ 10 ft from center of rotation 126 ft maximum boom length 135 ft maximum tip height 33/57 ft optional
More informationCROSSOVER T capacity class Boom truck crane Datasheet imperial
CROSSOVER 00 T capacity class Boom truck crane Datasheet imperial CROSSOVER 00 Features tons @ 10 capacity at rated distance from center of rotation 110 maximum boom length 118 maximum tip height 32/57
More informationSeries 900A. product guide. contents. features. 103' Four-Section Boom. Features Ton Rating. Self-lubricating Easy Glide Wear Pads
Series 9A product guide features 13' Four-Section Boom 26 Ton Rating Self-lubricating Easy Glide Wear Pads Internal Anti-two-block contents Features 2 Mounting Configurations 3 Specifications 4 Capacities:
More informationSeries 400B. product guide. contents. features. 56' Three-Section Boom. Features Ton Rating. Internal Anti-two-block. Mounting Configurations 3
Series 4B product guide features 56' Three-Section Boom 1 Ton Rating Internal Anti-two-block Self-lubricating Easy Glide Wear Pads contents Features 2 Mounting Configurations 3 Specifications 4 Capacities:
More informationSeries 400B. product guide. contents. features. 56' Three-section boom. Features Ton rating. Internal anti-two-block. Mounting Configurations 3
Series 4B product guide features 56' Three-section boom 1 Ton rating Internal anti-two-block Self-lubricating Easy Glide wear pads contents Features 2 Mounting Configurations 3 Specifications 4 Capacities:
More informationGrove TMS800E Product Guide
View View thousands thousands of of Crane Crane Specifications Specifications on on FreeCraneSpecs.com FreeCraneSpecs.com Grove TMS800E Product Guide Features 12,6 m - 39 m (41 ft - 128 ft) four-section
More informationRT 345 XL. 45 USt Lifting Capacity Rough Terrain Crane Datasheet Imperial. Features:
USt Lifting Capacity Rough Terrain Crane Datasheet Imperial Features: Rated capacity: USt @ 9 ft working radius Maximum boom length: 5 ft Maximum tip height: 147 ft 1 CONTENTS Page: Key...3 Dimensions
More informationGrove TMS9000E. Product Guide. Features
Grove TMS9000E Product Guide Features 90 t (110 USt) capacity 11,2 m - 43,3 m (36 ft - 142 ft) five-section full power boom Patented TWIN-LOCK boom pinning system 10 m - 17 m (33 ft - 56 ft) bi-fold lattice
More informationTECHNICAL SPECIFICATIONS
40142 40142 SIDE VIEW DIAGRAM Maximum Vertical Reach 207'/63,1 m Working Area 360 Degrees Lifting Capacity 80,000 lbs/36 287 kg Boom Length 142 /43,3 m Crane Weight (Standard) 40,300 lbs/18 280 kg Jib
More informationRT XL RT XL. 45 USt Lifting Capacity Rough Terrain Crane Datasheet Imperial. Features:
USt Lifting Capacity Rough Terrain Crane Datasheet Imperial Features: Rated capacity: USt @ 9 ft working radius Maximum boom length: 5 ft Maximum tip height: 147 ft 1 CONTENTS Page: Key............................................................................................
More informationCROSSOVER 4500L. 45T capacity class Boom Truck Crane Datasheet imperial. View thousands of Crane Specifications on FreeCraneSpecs.com.
45T capacity class Boom Truck Crane Datasheet imperial Features 45 ton rated capacity @ 9 ft from center of rotation 129 ft maximum boom length 136 ft maximum tip height 32/49 ft optional jib 183 ft maximum
More informationCROSSOVER Datasheet imperial. Boom Truck Crane 60T capacity class. Features
Boom Truck Crane T capacity class Datasheet imperial Features tons @ 10 capacity at rated distance from center of rotation 110 maximum boom length 115 maximum tip height 32/57 optional jib 1 maximum sheave
More informationView thousands of Crane Specifications on FreeCraneSpecs.com
40142 40142 SIDE VIEW DIAGRAM Maximum Vertical Reach Working Area Lifting Capacity Boom Length Crane Weight (Standard) Jib Lengths Winch Bare Drum Pull 201'/61.3 m 360 Degrees 80,000 lbs/36,287 kg 142
More informationTMS900E. product guide. contents. features 90 ton (80 mton) capacity. Truck Crane ft ( m) 5 section full power boom
features 90 ton (80 mton) capacity 37-142 ft (11.2-43.2 m) 5 section full power boom Patented TWIN-LOCK boom pinning system 33-56 ft (10-17m) bifold lattice swingaway extension Optional 33-56 ft (10-17
More informationRough Terrain Crane. 65 U.S. Tons (59 Metric 10 ft Radius ft, 5 Section Main Boom 30.2 ft 52.5 ft Boom Extension.
SRC865XL Rough Terrain Crane 65 U.S. Tons (59 Metric Tons) @ 10 ft Radius 139.4 ft, 5 Section Main Boom 30.2 ft 52.5 ft Boom Extension Product Guide key FEATURES OPERATOR S CAB Spacious ergonomic cab with
More informationSeries 600E. product guide. contents. features. All New Design. Features 2. 90' Four-Section Boom. 20 Ton Rating. Mounting Configurations 3
Series 6E product guide features All New Design 9' Four-Section Boom 2 Ton Rating Self-lubricating Easy Glide Wear Pads Internal Anti-two-block Auxiliary Stabilizers Variable Displacement Hydraulic System
More information40142R TECHNICAL SPECIFICATIONS 40142R SIDE VIEW DIAGRAM. Maximum Vertical Reach. Powered Boom Sections 5 Overall Height. 210'/64 m Working Area
40142R 40142R SIDE VIEW DIAGRAM Maximum Vertical Reach 210'/64 m Working Area 360 Degrees Lifting Capacity 80,000 lbs/36 287 kg Boom Length 142 /43,3 m Crane Weight (Standard) 41,700 lbs/18 915 kg Jib
More informationGrove TMS9000E Product Guide
Grove TMS9000E Product Guide Features 90 t (110 USt) capacity 11,2 m - 43,4 m (36 ft - 142 ft) five-section full power boom Patented TWIN-LOCK boom pinning system 10 m - 17 m (33 ft - 56 ft) bi-fold lattice
More information50105R TECHNICAL SPECIFICATIONS 50105R SIDE VIEW DIAGRAM. Powered Boom Sections 4 Overall Height
50105R 50105R SIDE VIEW DIAGRAM Maximum Vertical Reach Working Area Lifting Capacity Boom Length Crane Weight (Standard) Jib Lengths Winch Bare Drum Pull 164'/50 m 360 Degrees 100,000 lbs/45,359 kg 105
More informationKEY. Hook block. Operator aids. Distance from hook to head sheave pin. Cab. Hook and ball. Heating / Air conditioning. Hydraulics.
KEY /////////////////////////////////////////////////////////////////////////////////////////////////////////////// Operator aids Hook block Cab Distance from hook to head sheave pin Heating / Air conditioning
More informationNATIONAL MODEL 990A - 26 TON CAPACITY
LIFTING CHARTS - Boom Trucks NATIONAL MODEL 99A - 26 TON CAPACITY Load Chart Rating: Series 99A (27.4 m) Boom with 44 ft. (13.4 m) Jib 2ND JIB 44FT 1ST JIB 25FT LENGTH IN FEET 9 54 27-1 2 8 7 6 A B C D
More informationGRT8100 Product Guide
GRT8100 Product Guide ASME B30.5 Imperial 85% Features 90 t (100 USt) capacity 12 m 47 m (39.2 ft 154.3 ft) five-section full-power boom 10 m 17 m (33 ft 56 ft) manual offsettable bi-fold lattice swingaway
More informationOperating radius in feet from axis of rotation
LIFTING CHARTS - Hydraulic Truck Cranes GROVE MODEL - 110 TON CAPACITY working range 36-142' main boom 0 Height from the ground in feet Boom and extension length in feet Operating radius in feet from axis
More informationRT USt Lifting Capacity Rough Terrain Crane Datasheet Imperial. Features:
55 USt Lifting Capacity Rough Terrain Crane Datasheet Imperial www.terexcranes.com Features: Rated capacity: 55 USt @ ft working radius Maximum boom length: 1 ft Maximum tip height: 1 ft 1 CONTENTS Page:
More informationSeries 500E. product guide. contents. features. All New Design. Features 2. 71' Three-Section Boom. 18 Ton Rating. Mounting Configurations 3
Series product guide features All New Design 71' Three-Section Boom 18 Ton Rating Self-lubricating Easy Glide Wear Pads Internal Anti-two-block Auxiliary Stabilizers Variable Displacement Hydraulic System
More informationLINK-BELT MODEL HTC TON CAPACITY RANGE DIAGRAM. LIFTING CHARTS - Hydraulic Truck Cranes
LIFTING CHARTS - Hydraulic Truck Cranes LINK-BELT MODEL HTC-840-40 TON CAPACITY RANGE DIAGRAM NOTE: and fly and jib geometry shown are for unloaded condition and machine standing level on firm supporting
More informationRT US t Lifting Capacity Rough Terrain Cranes Datasheet Imperial. Features
US t Liing Capacity Rough Terrain Cranes Datasheet Imperial Features Rated capacity: US t @ 9 working radius Maximum boom length: 111 Maximum tip height: 1 CONTENTS Page: Key...3 Dimensions Crane dimensions....4
More informationRT530E-2 Product Guide
RT530E-2 Product Guide ASME B30.5 Imperial 85% Features 30 t (30 USt) capacity 8,8 m 29 m (29 ft 95 ft) four-section fullpower boom 7,9 m 13,7 m (26 ft 45 ft) offsettable telescopic swingaway extension
More informationGrove YB Product Guide. Features. ASME B30.5 Imperial 85%, Metric 85%, DIN/ISO. 13,6 t (15 USt) capacity
Grove YB5515-2 Product Guide ASME B3.5 Imperial 85%, Metric 85%, DIN/ISO Features 13,6 t (15 USt) capacity 12,5 m (41 ft) three-section, full-power synchronized boom 9,1 t (1 USt) deck carrying capacity
More informationGrove RT540E. Product Guide. Features. 35 t (40 USt) capacity. 9,8 m 31 m (32 ft 102 ft) 4-section full power boom
Grove RT5E Product Guide Features t ( USt) capacity 9,8 m 31 m (32 ft 102 ft) 4-section full power boom 7,9 m 13,7 m (26 ft ft) offsettable telescopic swingaway extension Dual-axis electric joystick controllers
More informationRT ROUGH TERRAIN CRANE DATASHEET - IMPERIAL. Features:
ROUGH TERRAIN CRANE DATASHEET - IMPERIAL Features: Rated capacity: 55 ton @ ft working radius Maximum boom length: 1 ft Maximum tip height: 1 ft CONTENTS Page: Key............................................................................................
More informationSeries 1300A Hydraulic Crane 30 Ton Load Ratings
Series 13A Hydraulic Crane 3 Ton Load Ratings DANGER AN UNTRAINED OPERATOR SUBJECTS HIMSELF AND OTHERS TO DEATH OR SERIOUS INJURY YOU MUST NOT OPERATE THIS CRANE UNLESS You have been trained in the safe
More informationGrove TMS700E. Product Guide. Features. 50 t or 55 t (50 USt or 60 USt) capacity
Grove TMS700E Product Guide Features 50 t or 55 t (50 USt or 60 USt) capacity 11 m 33,5 m (36 ft 110 ft) four-section, full power sequenced synchronized boom 10,1 m 17 m (33 ft 56 ft) offsettable bi-fold
More informationT 775. truck crane 75 ton capacity. range diagram & lifting capacities. Range Diagram (40' - 126' boom)
T 7 truck crane ton capacity range diagram & lifting capacities DEFLECTIONS NOT SHOWN 6' - 9" 4' - 8" DIMENSIONS ARE FOR LARGEST FACTORY FURNISHED HOOK BLOCK AND HOOK & BALL, WITH ANTI-TWO BLOCK ACTIVATED
More informationRT US t Lifting Capacity Rough Terrain Cranes Datasheet Imperial. View thousands of Crane Specifications on FreeCraneSpecs.com.
70 US t Lifting Capacity Rough Terrain Cranes Datasheet Imperial Features Rated capacity: 70 US t @ 9 ft working radius Maximum boom length: 111 ft Maximum tip height: 170 ft 07/26/12, Round 1 CONTENTS
More informationRT 670 ROUGH TERRAIN CRANE DATASHEET - IMPERIAL. Features:
ROUGH TERRAIN CRANE DATASHEET - IMPERIAL Features: Rated capacity: 70 ton @ 9 ft working radius Maximum boom length: 111 ft Maximum tip height: 170 ft CONTENTS Page: Key............................................................................................
More informationGCD15 Product Guide. Features. ASME B30.5 Imperial 85%, Metric 85%
GCD15 Product Guide ASME B30.5 Imperial 85%, Metric 85% Features 13,6 t (15 USt) capacity 12,5 m (41 ft) three-section full-power boom 8,1 t (9 USt ) deck carrying ability Load sensing hydraulic piston
More informationGrove TM500E-2. Product Guide. Features. 40 t (45 USt) capacity. 8,8 m 29 m (29 ft 95 ft) 4 section, full power boom
Grove TM500E-2 Product Guide Features 40 t (45 USt) capacity 8,8 m 29 m (29 ft 95 ft) 4 section, full power boom 9,8 m 31 m (32 ft 102 ft) 4 section, full power boom 7,9 m 13.7 m (26 ft 45 ft) offsettable
More informationTMS500E. product guide. contents. features 40 ton (40 mt) Capacity. Truck Mounted Crane
product guide features ton ( mt) Capacity 29 ft.-95 ft. (8.8-29 m) 4 section, full power synchronized boom 26 ft.- ft. (7.9-13.7 m) offsettable telescopic swingaway extension Optional 8,4 lb. (3837 kg)
More informationProduct Guide. Features. 6 ft 110 ft) four-section, full power sequenced synchronized. nchronized boom. swingaway extension.
Grove TMS0E Product Guide Features ř t or t ( USt or USt) capacity ř 11 m 33,5 m (36 6 ft 110 ft) four-section, full power sequenced synchronized nchronized boom ř 10,1 m 17 m (33 33 ft 56 ft) offsettable
More informationRT230XL RT 230 XL. Rough Terrain Crane Datasheet imperial. Features: Rated capacity: ft working radius. Maximum boom length: 100 ft
Rough Terrain Crane Datasheet imperial RT230XL Features: Rated capacity: 30 ton @ 10 ft working radius Maximum boom length: 100 ft Maximum tip height: 140 ft CONTENTS Key............................................................................................
More informationRange Diagram and Lifting Capacity T Cranes RANGE DIAGRAM BOOM
Range Diagram and Lifting Capacity T340-1 Cranes RANGE DIAGRAM 30-94 BOOM Dimensions are for largest factory furnished hook block and hook & ball, with anti-two block activated COUNTER WEIGHT BOOM LENGTH
More information6010LP 30 Ton Telescopic Boom Crawler Crane
GENERAL DATA CRANE CAPACITY BOOM 30 ton at 10 feet (27t at 3.0m) 3-section, 32 8 80 0 (9.9 m 24.4 m) DIMENSION Overall Length 41 1 (12.52 m) Overall Width (tracks extended) 13 6 (4.12 m) Overall Width
More information