WATSONS ROAD A3 ORIGINAL
|
|
|
- Carol Melina Cameron
- 5 years ago
- Views:
Transcription
1 DO NOT SCLE THIS DRWING - USE FIGURED DIMENSIONS ONLY 1160 VINEYRD ROD ENDIGO RILWY LINE UCKLND WY FOX HOLLOW DRIVE WTSONS ROD CINNON ROD Parsons rinckerhoff Pty Limited ("P") this document ("the information") is the property of P. This than that for which it was supplied by P. P makes no 25/07/16 UPD CROSS SECTION DH GW DH DR ISSUED FOR INFORMTION DRWN CHECK DESIGN VERIFY m SCLE 1:8000 PPROVED FOR ND ON EHLF OF PRSONS RINCKERHOFF USTRLI PTY LIMITED PO OX Melbourne N SUNURY STH ND LNCEFIELD RD PSP LYOUT PLN No. DISCIPLINE NUMER CIV /10/ :59:33 PM \\PMELFIL01\proj\M\METROPOLITN_PLNNING\ _SUNURY_SOUTH_ND_LNCEFIELD\09_CDD\Drawings\02_Civil\02_Drawings\ a-civ-1160.dgn
2 ENDIGO RILWY LINE FOR CONTINUTION REFER TO SHEET LEVEL CROSSING LIMIT OF WORKS C 9/09/16 CROSS SECTION MODIFIED JM GW JM GW 30/06/2016 CROSS SECTION CHNGED DH GW DH DR TO MODIFIED CONNECTOR ISSUED FOR INFORMTION Parsons rinckerhoff Pty Limited ("P") this document ("the information") is the property of P. This than that for which it was supplied by P. P makes no SCLE 1:2000 DO NOT SCLE THIS DRWING - USE FIGURED DIMENSIONS ONLY PPROVED FOR ND ON EHLF OF PRSONS RINCKERHOFF USTRLI PTY LIMITED PO OX N SUNURY STH ND LNCEFIELD RD PSP LIGNMENT PLN SHEET 1 No. DISCIPLINE NUMER. DRWN CHECK DESIGN VERIFY Melbourne CIV 1161 C 26/10/ :59:48 PM \\PMELFIL01\proj\M\METROPOLITN_PLNNING\ _SUNURY_SOUTH_ND_LNCEFIELD\09_CDD\Drawings\02_Civil\02_Drawings\ a-civ-1161.dgn
3 UCKLND WY/JCKSONS HILL LINK (SS-RD5/SS-RD9) FOR CONTINUTION REFER TO SHEET FOR CONTINUTION REFER TO SHEET FOR CONTINUTION REFER TO UCKLND WY/JCKSONS HILL LINK (SS-RD5/SS-RD9) SHEET 1 UCKLEY ROD 25/07/16 UPD CROSS SECTION DH GW DH DR ISSUED FOR INFORMTION Parsons rinckerhoff Pty Limited ("P") this document ("the information") is the property of P. This than that for which it was supplied by P. P makes no SCLE 1:2000 DO NOT SCLE THIS DRWING - USE FIGURED DIMENSIONS ONLY PPROVED FOR ND ON EHLF OF PRSONS RINCKERHOFF USTRLI PTY LIMITED PO OX N SUNURY STH ND LNCEFIELD RD PSP LIGNMENT PLN SHEET 2 No. DISCIPLINE NUMER. DRWN CHECK DESIGN VERIFY Melbourne CIV /10/ :59:54 PM \\PMELFIL01\proj\M\METROPOLITN_PLNNING\ _SUNURY_SOUTH_ND_LNCEFIELD\09_CDD\Drawings\02_Civil\02_Drawings\ a-civ-1162.dgn
4 FOR CONTINUTION REFER TO SHEET FOX HOLLOW DRIVE (SS-RD6) FOR CONTINUTION REFER TO FOX HOLLOW DRIVE (SS-RD6) SHEET 1 FOR CONTINUTION REFER TO SHEET 4 25/07/16 UPD CROSS SECTION DH GW DH DR ISSUED FOR INFORMTION Parsons rinckerhoff Pty Limited ("P") this document ("the information") is the property of P. This than that for which it was supplied by P. P makes no SCLE 1:2000 DO NOT SCLE THIS DRWING - USE FIGURED DIMENSIONS ONLY PPROVED FOR ND ON EHLF OF PRSONS RINCKERHOFF USTRLI PTY LIMITED PO OX N SUNURY STH ND LNCEFIELD RD PSP LIGNMENT PLN SHEET 3 No. DISCIPLINE NUMER. DRWN CHECK DESIGN VERIFY Melbourne CIV /10/2016 1:00:00 PM \\PMELFIL01\proj\M\METROPOLITN_PLNNING\ _SUNURY_SOUTH_ND_LNCEFIELD\09_CDD\Drawings\02_Civil\02_Drawings\ a-civ-1163.dgn
5 FOR CONTINUTION REFER TO SHEET PPROX SQM PPROX. 974 SQM LIMIT OF WORKS CRINNION ROD 25/07/16 CRINNION ROD WORKS REMOVED, LOW MOVED DH GW DH DR ISSUED FOR INFORMTION Parsons rinckerhoff Pty Limited ("P") this document ("the information") is the property of P. This than that for which it was supplied by P. P makes no SCLE 1:2000 DO NOT SCLE THIS DRWING - USE FIGURED DIMENSIONS ONLY PPROVED FOR ND ON EHLF OF PRSONS RINCKERHOFF USTRLI PTY LIMITED PO OX N SUNURY STH ND LNCEFIELD RD PSP LIGNMENT PLN SHEET 4 No. DISCIPLINE NUMER. DRWN CHECK DESIGN VERIFY Melbourne CIV /10/2016 1:00:08 PM \\PMELFIL01\proj\M\METROPOLITN_PLNNING\ _SUNURY_SOUTH_ND_LNCEFIELD\09_CDD\Drawings\02_Civil\02_Drawings\ a-civ-1164.dgn
A3 ORIGINAL DO NOT SCALE THIS DRAWING - USE FIGURED DIMENSIONS ONLY VERIFY ALL DIMENSIONS ON SITE
D D LNCEFIELD ROD 11001 D 2 3 4 5 6 7 50mm T FULL SIZE PRELIMINRY ISSUE 10/12/15 ISSUED FOR INFORMTION RM GW RM DR Parsons rinckerhoff ustralia Pty Limited ("P") this document ("the information") is the
A3 ORIGINAL DO NOT SCALE THIS DRAWING - USE FIGURED DIMENSIONS ONLY VERIFY ALL DIMENSIONS ON SITE
D D SUNURY ROD 50mm T FULL SIZE 1000 1 2 3 4 5 6 7 8 PRELIMINRY ISSUE 10/12/15 ISSUED FOR INFORMTION RM GW RM DR Parsons rinckerhoff ustralia Pty Limited ("P") this document ("the information") is the
SECTION A-A
40.08 D 8 6 5 4 3 2 1 WRNING: IF THERE RE NY DISCREPNCIES ETWEEN THE CD FILE ND THE DRWING, THE DRWING WILL TKE PRECEDENCE. IF IN DOUT, SK. D C 51.1 48 20.25 18 C 23.68 15.12 NOTE: DRWER UNIT NOT INCLUDED,
WARNING: IF THERE ARE ANY DISCREPANCIES BETWEEN THE CAD FILE AND THE DRAWING, THE DRAWING WILL TAKE PRECEDENCE. IF IN DOUBT, ASK.
28.48 DJUSTLE 5.64 19.78 DJUSTLE D 8 7 6 5 4 3 2 1 20.37 WRNING: IF THERE RE NY DISCREPNCIES ETWEEN THE CD FILE ND THE DRWING, THE DRWING WILL TKE PRECEDENCE. IF IN DOUT, SK. D 51.80 48.00 9.57 C C 18.00
SRX IVL LANDFILL PUMP BOTTOM LOADING
REV DESCRIPTION DTE PPROVED RELESE FOR PRODUCTION 5/9/008 SWells 6 7 6 6 9 0 0 8 8 7 5 5 5 8 9 8 5 ) THE MGNET ITEM 5 IS INSTLLED INTO THE PUMP HED NORTH POLE FIRST. 9 8 7 6 DRWN SWells 5/9/008 Q 75 West
C11536 DRAWN BY DATE CHK SCALE SIZE
THIS COPY IS PROVIDED ON RESTRICTED SIS ND IS NOT TO E USED IN NY WY DETRIMENTL TO THE INTERESTS OF PNDUIT CORP. Engineer Grade Prismatic Reflective luminum (Dim "") (Dim "") 00 VN CCESS 00 RESERVED PRKING
SMARTBOX MOUNTING BRACKET INSTALLATION INSTRUCTIONS John Deere 1790 (24/20 ), 1770NT, and DB CCS Planters Ladder & Rear Row Mount
World Class Industries 3 E. Prairie Street Crystal Lake, IL 6001 Phone: -SMRTOX (opt. 1) -62-26 (opt. 1) Fax: 1-9-99 SMRTOX MOUNTING RCKET INSTLLTION INSTRUCTIONS John Deere 190 (2/20 ), 10NT, and D CCS
Automatic Outboard Flushing System 1.5
utomatic Flushing System 1.5 Manual Shown: Version 1.5 B with optional remote switch kit and optional inlet hose kit. Reverso Pumps, Inc. www.reversopumps.com contact@reversopumps.com Ph: (954) 522-0882
S3 S4 S6 S7 S0 A6 AC AF BU CE CN DL D4 D5 EL PF FK HC HN FE ST MO PV PK TB TC TG TM TP TF TI UH UR VI XL
PUMP CUTWYS ND DRWINGS On the following pages are external and internal pump drawings with part numbers and material codes. The following table identifies each material code. MTERIL CODES 303 Stainless
TYPICAL ELEVATION VIEW
22.2 STNDRD PNEL PRT LIST PRODUCT LENGTH WEIGHT * TUFBRRIER 95.5" PNEL 2426 mm [95.5"] 7.7 kg [7 lbs] TUFBRRIER 9.5" PNEL 3035 mm [9.5"] 9.7 kg [2.3 lbs] TUFBRRIER 43.5" PNEL 3645 mm [43.5"].6 kg [25.6
TOP CAP KNOCK-OUTS FOR
2 THIS COPY IS PROVIDED ON RESTRICTED SIS ND IS NOT TO E USED IN NY WY DETRIMENTL TO THE INTERESTS OF PNDUIT CORP.. VISIT OUR ON-LINE CTLOG T WWW.PNDUIT.COM FOR LIST OF CURRENT PRTS PPLICLE FOR TOP CP
13V399AN-DC DRAWN BY DATE CHK SCALE SIZE
THIS COPY IS PROVIDED ON RESTRICTED SIS ND IS NOT TO E USED IN NY WY DETRIMENTL TO THE INTERESTS OF PNDUIT CORP. TOP CP 2 KNOCK-OUTS FOR PDU POWER CORD PERFORTED SINGLE HINGE SPLIT DOOR SIDE PNEL IN SOME
450DIA STATION BY-PASS CONNECTION c/w 450DIA KNIFE GATE ISOLATION VALVE AND BLIND FLANGE C.L. OF PUMP REMOVAL MONORAIL BEAM OPENING ABOVE
3 87.43 m 3 P7 P7 3 VIC COUPLING (TYP. 6) PRESSURE INDICTOR c/w ISOLTION VLVE T SPRINGLINE ND 5DI DRIN ND VLVE T INVERT (TYP.3) 45DI STTION Y-PSS CONNECTION c/w 45DI KNIFE GTE ISOLTION VLVE ND LIND FLNGE
MANHOLE GRADE RING HEIGHT = 40mm*, 50mm, 75mm 75mm WITH STEP CON CAST PIPE STENCIL ISOMETRIC VIEW MATERIAL LIST PLAN VIEW PRODUCT VARIABLES
CCP-OKVILLE (HEIGHT) ( OF MFG) LUM. STEP FOR GM00752 ONLY 54 102 715 95 D5 855 HOOP STEEL 150 LP OR BUTT WELD 991 MTERIL LIST QTY E REMRK 1 E LUMIN. STEP FOR 75mm ONLY 1 E HOOP STEEL RD. 855 X D5 PLN VIEW
MNPV6 REV A DISCO 4X FINAL ASSY
NOTES 1) ITEM 2,USR, MUST HVE TWO END SCREWS REMOVED, SO THT ITEM, WHITE INSULTORS, CN E INSTLLED. 2) UNIT SHIPS WITH THE FOLLWING ECH LCK TWO WIRE STRIN RELIEFS, P/N 9--1 ECH LCK STRIN RELIEF NUTS, P/N
R E V I S I O N REV. DRAWN BY ECO No DESCRIPTION DATE APPROVED BILL OF MATERIALS
NOTES: UNLESS OTHERWISE SPECIFIED. CORNERS DRWN SHRP TO E R.005 MXIMUM. 2. EXTERIOR SURFCE TEXTURE TO E EQUIVLENT TO MT-007. TEXTURE ON ENCLOSURE WILL VRY FROM TIME TO TIME S THE TOOL WERS ND IT ECOMES
7SP. Stainless Steel Pump AMERICAN STAINLESS PUMPS STAINLESS STEEL PUMPS FOR THE COMMERCIAL MARKETPLACE
7SP Stainless Steel Pump MERICN STINLESS PUMPS STINLESS STEEL PUMPS FOR THE COMMERCIL MRKETPLCE 7SP Stainless Pump Our exclusive design allows for use with easy to locate replacement parts. No more hard
G U M I S P R O D U C T S C A T A L O G
P R O D U C T S C T L O G RU B B E R M O L D I N G M E T L M C H I N I N G R E T R O F I T E N G I N E E R I N G T E C H N I C L S E RV I C E S B O U T U S GUMIS is a company specialised in rubber molding,
S-Series Brushless, Frameless Torque Motors
S-Series rushless, Frameless Torque Motors Slotless, brushless ring motors with high torque output and zero cogging Frameless design for easy integration into OEM machines Various winding options available
AQUILA BOILER DATE P.P REV DESCRIPTION DRAWN AQUILA- BOILER- GA- ASSY. Not Defined DO NOT SCALE DRAWING SIGNATURE TITLE: WELDING:
UNLESS OTHERWISE SPEIFIED: DRWN DESRIPTION DTE DRWN DTE P.P 18.6.15 SIGNTURE DO NOT SLE DRWING QUIL OILER DIMENSIONS RE IN MILLIMETERS PLTE S 11 OILER PLTE STYS & RIVETS 018 15 STEEL 107 OPPER TUES S 059
P: E: W: 1 of 20 MEG DS 034 A
McMillan Engineering Group designs and manufactures a complete range of standard and custom IHS Jacking Equipment to suit all of your construction needs. 1 of 20 MEG DS 034 A Index IHS Double Acting Cylinders...
1 SGI 500XT INVERTER TRANSFORMER WITH OUTDOOR ENCLOSURE CONDUIT, FITTINGS AND CONDUCTORS AS REQUIRED
1. THIS DOCUMENT IS INTENDED TO ILLUSTRTE THE PPLICTION OF 600VC TRNSFORMER WITH OUTDOOR ENCLOSURE WITH SOLECTRI RENEWLES SGI 500XT INVERTER. EXMPLES OF THE FOLLOWING RE GIVEN: - INVERTER TO TRNSFORMER
DETAIL - FACADE SCREEN
C D E general notes: ll dimensions are given in millimeters, unless otherwise specified. 0_DD Do not scale drawings. ll dimensions to be verified on site before construction commences. 9 Contractors to
CASEMENT - LARGE MISSILE IMPACT
CSEMENT - LRGE MISSILE IMPCT 1/4" MX. O.. FLNGE WIDTH 7" MX. UNIT WIDTH 6 1/4" MX. SSH WIDTH 1 /4" GLSS DLO GENERL NOTES: 1. THE PRODUCT SHOWN HEREIN IS DESIGNED ND MNUFCTURED TO COMPLY WITH THE FLORID
THIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP.
THIS COPY IS PROVIDED ON RESTRICTED SIS ND IS NOT TO E USED IN NY WY DETRIMENTL TO THE INTERESTS OF PNDUIT CORP. DUL HINGE PERFORTED FRONT SPLIT SIDE PNEL SOLID SELED RER SPLIT SIDE PNEL VED REDY INTEGRL
SALES - 3D images 404??? "New 2015 Design Range" NOTES: IMAGES ARE DIAGRAMATIC ONLY REFER TO ELEVATIONS FOR DETAILS
IMGES RE DIGRMTI ONLY REFER TO ELEVTIONS FOR DETILS DDRESS: P.O. BOX 600 PRDISE POINT, 4216 N: 116332220 BN: 77116332220 QBS: 1086689 LL ONTENT OPYRIGHTED:- and is protected by the ommonwealth opyright
NET-ACCESS S TYPE VED READY CABINET 600mm WIDE X 1200mm DEEP FAMILY 12V343ST-DC VED TOP CAP FRONT PERFORATED SINGLE HINGE DOOR SPLIT SIDE PANEL
THIS COPY IS PROVIDED ON RESTRICTED SIS ND IS NOT TO E USED IN NY WY DETRIMENTL TO THE INTERESTS OF PNDUIT CORP. PNEL VED TOP CP PERFORTED SINGLE HINGE PNEL SOLID RER NET-CCESS S TYPE VED REDY CINET 600mm
THIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP.
THIS COPY IS PROVIDED ON RESTRICTED SIS ND IS NOT TO E USED IN NY WY DETRIMENTL TO THE INTERESTS OF PNDUIT CORP. SIDE PNEL 2 TOP CP PERFORTED SINGLE HINGE KNOCK-OUTS FOR PDU POWER CORD SIDE PNEL RER PERFORTED
SIDE DETAIL ELEVATION DETAIL JCM VIVA VISIO SYSTEM PRODUCT DATA -
* UCP REQUIRED IF SYSTEM DOES NOT HVE HNDRIL OPTIONL CPS ) SS 'U' CP ) SS Ø" CP 3) SS Ø" LED CP ) Ø " OR Ø" SS HNDRIL ) Ø" WOOD HNDRIL CHERRY WOOD " GP (NOM) RED OK WHITE OK MPLE WOOD 3) Ø " LED iril 3'7"
Ea series sr & da pneumatic actuators
Ea series sr & da pneumatic actuators CONTENTS DESIGN ND FETURES Page 3 PRTS ND MTERIL Page 4 DIMENSIONL DRWINGS Page OPERTING PRINCIPLES Page LIMIT STOP DJUSTMENT Page DOULE CTING TORQUE TLE Page SPRING
Model 1001/1001HPS Drinking Fountain
INSTLLTION, OPERTION & MINTENNCE INSTRUCTIONS Kleppe Lane Sparks, NV 89-667 (77) 9-72 Fax (77) 9-72 E-mail: haws@hawsco.com website: www.hawsco.com Model 00/00HPS Drinking Fountain No. 20760(9) NOTE TO
00083FAB-DC DRAWN BY DATE CHK SCALE SIZE
D0D/6 THIS COPY IS PROVIDED ON RESTRICTED SIS ND IS NOT TO E USED IN NY WY DETRIMENTL TO THE INTERESTS OF PNDUIT CORP. 0 5/4/8 SPLIT SIDE PNEL JGC TOP CP CURVED PERFORTED SINGLE HINGE DOOR SPLIT SIDE PNEL
HOOK UP LAYOUT FOR HEAT GENERATION AND FUEL TANK SYSTEM
HOOK UP LYOUT FOR HET GENERTION ND FUEL TNK SYSTEM DESRIPTION IRNIN PETROLEUM STNDRDS NO REVISION PERMITTED UNLESS PPROVED Y STNDRD ORGNIZTION OVER SHEET DRWING No. IPS-D-R-018 SHT 1 "(DN0) FILL FUEL OIL
Maricopa Solar. Decommissioning Plan
Maricopa Solar Decommissioning Plan Table of Contents: 1. Introduction 2. Decommissioning the H2 System 3. Decommissioning the 48V System 4. Decommissioning the 575V System 5. Decommissioning the 12KV
A u.060 PLASTIC VENT FAN SNAPPED IN PLACE u ±.062 SLOT VIEW (4) DIMENSIONS ARE FOR REFERENCE ONLY UNLESS TOLERANCE SPECIFIED
Dimensional Drawing VR MODEL CUST. PT. NO. B C D HP VOLTS SF MPS HZ RPM CONN VOLTS PROT. DESCRIPTION / REMRKS VR001 C55JXKRH2150 MODEL CUST. PT. NO. 10.471 B C D HP1/4 115/208230 VOLTS SF 1.0 5.6/2.72.8
CADDENS HILL - STAGE 5 CONSTRUCTION CERTIFICATE PROPOSED ROAD & DRAINAGE WORKS DA 17/0099
CDDE HILL - STGE 5 COTRUCTION CERTIFICTE PROPOSED ROD & DRINGE WORKS D 17/0099 O'CONN ELL STR E LL LNE ET O'CONNE STGE 5 STTE RCHIVES Plotted: ugust 22, 2017 File Name: J:\110358 - OConnell Lane, Caddens\04
REMOVABLE MOUNT INSTALLATION FOR TRUCK BODIES For truck bodies only, not for trailers. Recommended for use with Dump Beds. See Drawing F.
REMOVBLE MOUNT INSTLLTION FOR TRUCK BODIES For truck bodies only, not for trailers. Recommended for use with Dump Beds. See Drawing 102468F. IMPORTNT. Safe and reliable operation of Donkey mounting kits
CITY OF TAKOMA PARK, MARYLAND
, MRYLN IORETENTION FCILITY WITH ( OPTION-2) IORETENTION WITH OVERFLOW RINGE SYSTEM TITLE N GENERL NOTES NTS Sept 8,207 RWING SW- No. IORETENTION FCILITY WITH ( OPTION-2) NTS TITLE N GENERL NOTES PPROVE
TAKE-A-LABEL Power Dr. Nunica, MI Phone (616) Fax (616)
OPERTIONS MNUL MODEL TL-000C CONTINUOUS DUTY TMP- LBELER TKE--LBEL 900 Power Dr. Nunica, MI 9 Phone () -900 Fax () -90 http://www.take-a-label.com E-Mail: takealabel@msn.com 000C Tamp Labeler 000C System
GREGORY RD PROPERTY LINE (PPROX.) LEGEND LIGHTING CONTROL CENTER 50W METL HLIDE FLOODLIGHT GROUND MOUNTED JUNCTION BOX PROPERTY LINE (PPROX.) UNDERGROUND CONDUIT WITH CONDUCTOR, SIZE S SHOWN. 50W METL
TOWN OF MANCHESTER TECHNOLOGY EQUIPMENT AND SERVICES BID DOCUMENTS ADDITIONS AND RENOVATIONS TO WADDELL ELEMENTARY SCHOOL TSKP STUDIO
DRING LIST TON OF MNCHESTER COVER SHEET DRINGS T 1 LOER LEVEL - LDG T 1 LOER LEVEL - LDG T 2 UPPER LEVEL - LDG T 2 UPPER LEVEL - LDG CODE COMPLINCE NOTES STTE PROJECT NUMER PHSE 3 OF 4 FERURY 5, 2018 EQUIPMENT
PRODUCT INFORMATION PACKET
PRODUCT INFORMTION PCKET Model No: 145THFR5329 Catalog No: Y368 2,1800,TEFC,145TC,3/60/230/460 1000:1 peed Ratio Regal and Marathon are trademarks of Regal Beloit Corporation or one of its affiliated companies.
tel. +44 (0) 28 37 518111 fx +44 (0) 28 37 528181 e.mil sles@technidrive.co.uk points for considertion when shft mounting direct drive ger units. modern hollow bore output hub ger units lend themselves
HIGH FLOW SOLENOID VALVES
P PRODUCT ROCHURE HIGH FLOW SOLENOID VLVES HIGH FLOW IN COMPCT DESIGN TLE OF CONTENTS High Flow Solenoid Valves 9 How to ccessorize Product Features 9 ase Plate Options and ccessories Features and enefits
SHEET 1 OF 6
REVISIONS REV DESCRIPTION CHG.NO. PP'D DTE SENSOR WELD NECK MOUNTING FLNGE & WELD FTG. (FCTORY WELDED) VILBLE IN SME B16.5 RF & RTJ, ND EN 1092-1 RF. REFER TO TBLE 1 ON SHEET 2 OR FOR S ND DIMENSIONS NEW
2017 SOUTH MOUNTAIN DISTRICT PINEWOOD DERBY RULES Jim Swain, November 29, 2016
07 SOUTH MOUNTIN DISTRICT PINEWOOD DERY RULES Jim Swain, November 9, 06 The purpose of these rules is to develop a fair competition for all youth in the South Mountain District. These rules may differ
N2-GEN. TL SERIES Nitrogen Generators. Arc Suppression System. Transmission Line Pressurization. South-Tek
TL SERIES Nitrogen Generators Transmission Line Pressurization N2-GEN rc Suppression System www.southteksystems.com commercialsales@southteksystems.com 888.526.6284 South-Tek Systems 2 N 2 -GEN rc Suppression
BATTERY DISCONNECT UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES [MM]
![BATTERY DISCONNECT UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES [MM]](/thumbs/83/88584280.jpg "BATTERY DISCONNECT UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES [MM]")
ISIONS DESCRIPTION DTE BY 366 PRODUCTION RELESE 8/2/02 BF 002 3698 LOWER INPUT IMPEDNCE LEVEL 9/19/02 BF 003 4688 DD CONFORML COTING 1/23/06 BF 004 48 DD HETSHRINK TO TERMINL POST //06 BF 5303 UPDTE I
S»'94**gres* 6,=4.4.0 R\OF e.. S Z * 0 10.,5251, *S .//0/1111\\\\\\ VIWINCO INC. S-SERIES IMPACT AW/FIX STACKED 04/13/12
ISIONS DTE 07/27/5 ISED INSTLLTION DETILS RL THE PRODUCT SHOWIN HEREIN IS DESIGNED ND MNUFCTURED TO COMPLY WITH REQUIREME OF THE FLORID UILDING CODE 2 WOOD FRMING ND MSONRY OPENIING TO E DESIGNED l\id
631 ALLOWANES AND TOLERANCES
631 ALLOWANES AND TOLERANCES ANSI Fits. Tbles 3 through 9 inclusive show series of stndrd types nd clsses of fits on unilterl hole bsis, such tht the fit produced by mting prts in ny one clss will produce
[1200mm] 5" [125 mm] 2 3/4" [70mm] [2600mm] [450mm]
![[1200mm] 5 [125 mm] 2 3/4 [70mm] [2600mm] [450mm]](/thumbs/89/98551867.jpg "[1200mm] 5 [125 mm] 2 3/4 [70mm] [2600mm] [450mm]")
MIN 9'-10 1/2" [3010mm] 9'- CR 8'-6"MIN [2825mm] 6'-0" 12" S [2550mm] CR [1800mm] ON SIDE PLN "" 8'-8" CR 2 [2600mm] 6'-0" CR [1800mm] 2 FRONT ND RER S [55mm] 8'-6" [2550mm] [55mm] [125 mm] 2 [70mm] 6
PRODUCT SPECIFICATION C00 Converter. 48/36V to 12V, 20 Amps w/switched Output
ISIONS DESCRIPTION DTE BY 001 3826 PRODUCTION RELESE 8/21/03 BF 002 4650 DD 6 PIN MTING CONNECTOR PN S 10/12/05 BF 003 4969 GENERL DOCUMENT MODIFICTIONS 6/29/0 GF 5065 ELECTRICL CHRCTERISTICS CHNGES 11/1/0
GROCERY OUTLET (SHELL PACKAGE)
06/9/06 GROERY OUTLET (SHELL PKGE) TE ESRIPTION VIINITY MP N.T.S 0.0 SITE PLN SLE: " = 30' PROPOSE RETIL STORE 7,800 sq. ft. OE SUMMRY (GROERY OUTLET) THESE RWINGS RE SE ON THE 0 OSS. HPTER 3 - USE & OUPNY
PIPE SUPPORTS IRANIAN PETROLEUM STANDARDS COVER SHEET B A REV. DRAWING No. DATE DATE IPS-D-AR-012 DESCRIPTION
SUPPORTS DESRIPTION IRNIN PETROLEUM STNDRDS NO REVISION PERMITTED UNLESS PPROVED Y STNDRD ORGNIZTION OVER SHEET DRWING No. IPS-D-R-0 SHT ONRETE JOISTS STEEL JOISTS WOOD JOISTS NOTE: STRUTURL STEEL EM SEE
SIDE VIEW-1 REAR VIEW MODEL OF THE HIGH PRESSURE DREDGER ENGINE OF RICHARD TREVITHICK OF 1806 JDWDS JULY-2016 SHEET: 01 OF 09
0. NOTES: THE ORIGINL DRWINGS WERE GIVEN TO ME. THE RTICLE ND DRWINGS WERE PUBLISHED IN THE "MODEL ENGINEER" MGZINE OF SEPTEMBER. THE DESIGN ND BUILT WS BY TUBL CIN.. RER VIEW ENGINE OF RICHRD TREVITHICK
WATERTIGHT AIRTIGHT SPECIAL ACCESS DOORS & HATCHES, PART 1 GENERAL
SECTION 08316 WTERTIGHT IRTIGHT SPECIL CCESS DOORS & HTCHES, PRT 1 GENERL HIGHLIGHTED RES TO BE INSERTED BY SPECIFYING ENGINEER. 1.1 WORK OF THIS SECTION. THE WORK OF THIS SECTION INCLUDES PROVIDING LL
TENDER DOCUMENT. NIT No. DLI/C&E/WI-665/528 FOR
TENDER DOCUMENT NIT No. DLI/C&E/WI-665/528 FOR Tender for Design, Engineering, manufacturing & testing at work, Supply of 35 Nos. Local Control Stations (LCS) of different types & ssociated Works for ugmentation
-- 3 S1006 3 S1006 REMOVE EXISTING CCESS HTCH ND PRT OF EXISTING SL FOR NEW CCESS HTCH SIZE 6060 3960 REMOVE EXISTING CONCRETE PD MXM 914x914 CCESS HTCH INSTLL S PER MNUFCTURERS INSTRUCTIONS 6060 3960
DIRECTIONAL CONTROL (LD) DIRECTIONAL AND FLOW CONTROL (LD) SOLENOID OPERATED DIRECTIONAL
Pu. EC-01 DIRECTIONL CONTROL (LD) DIRECTIONL ND FLOW CONTROL (LD) SOLENOID OPERTED DIRECTIONL CONTROL (LDS) RELIEF (L) / SOLENOID CONTROLLED RELIEF (LS) VLVES Up to 31.5 MPa (4570 PSI), 5500 L / min (1453
6'R 2'-4" 5'RR 5-4"'
24'R 1'-3" INLET 24'R 1'-3" 24'R 1'-3" INLET 5'R 5' 5'R 4'/INLET REVISION HISTORY REV. DESCRIPTION DTE ECO BY RELESED FOR QUOTE RHOUSTON B DDED DIGS MWILLIMS 11 MIRROR NUMBER: MDE FROM: CHECK IN DTE/TIME:
XPR10A. BendPakSKU
Ser vi cemanual S er vi cepar t s& Di agr ams T hi sgui dei sat r oubl es hoot i ngr ef er enceus edf ormai nt ai ni ngands er vi ci ngyour BendPakpr oduct.i tpr ovi descompr ehens i vei nf or mat i ononi
OPERATING AND PARTS MANUAL 600 & 800 ROW CROP MODELS
OPERTING ND PRTS MNUL 600 & 800 ROW CROP MODELS Mobility 800 Row Crop Mobility 600 Row Crop www.daltong.com 602 E. VN BUREN LENOX, IOW 50851 800.32.798 TBLE OF CONTENTS TO YOU, THE OWNER... 1 SPECIFICTIONS...
OPERATING AND PARTS MANUAL
OPERTING ND PRTS MNUL 600, 800 & 1000 ROW CROP SPREDERS 2018 Daltong.com 800.342.7498 602 E. Van Buren Lenox, Iowa 50851 100% Employee Owned TBLE OF CONTENTS TO YOU THE OWNER... 1 LIMITED WRRNTY STTEMENT...
OPERATING AND PARTS MANUAL
OPERTING ND PRTS MNUL DLQ & DLQHD LIQUID PPLICTORS 2017 Daltong.com 800.342.7498 602 E. Van Buren Lenox, Iowa 50851 100% Employee Owned TBLE OF CONTENTS TO YOU THE OWNER... 1 LIMITED WRRNTY STTEMENT...
6 CFF Mounted E-Gun Assembly w/4" Z Axis Translator
ITE QTY PRTS LIST PRT NUME DESCRIPTION See Table 6 CFF Mounted E-Gun ssy, OM 0638 ISION HISTORY DESCRIPTION DTE PPROVE dded vent holes in stalk. /3/ MC Gun Changed to have lumina Insulators. 7/7/ MC dded
Primed Radius and Geometric Windows - In-Sash Custom Wood
TLE OF CONTENTS Specifications... 18-2 QuickSpecGuide... 18-4 Elevations/Sizes:1/4 Scale... 18-6 Full Round Units... 18-9 OctagonUnits... 18-10 Casement Half Round Units... 18-11 Casement Quarter Round
Model: Product Data Sheet Pico Vibe. 5mm Vibration Motor - 11mm Type. Key Features. Ordering Information. Datasheet Versions
Product Data Sheet Pico Vibe 5mm Vibration Motor - mm Type 5mm Vibration Motor - mm Type Shown on 6mm Isometric Grid Model: Ordering Information Key Features The model number fully defines the model, variant
RAPID-AIR OPERATING INSTRUCTIONS FOR P1V, P1M, P4V, P4M, P1W, P1WM RAPID-ROLL POWER ROLL
RPID-IR OPERTING INSTRUCTIONS FOR PV, PM, PV, PM, PW, PWM RPID-ROLL POWER ROLL RPID-IR 0 KISHWUKEE ST. ROCKFORD, IL. 0- PHONE: () 3- FX: () 3-3 WE SITE: www.rapidair.com TLE OF CONTENTS PGE. RPID-ROLL
STAKE BODY Swing-Away Mount
STKE BODY Swing-way Mount for the Model 8160 Installation Instructions 720713 2006 Little Wonder, Inc. ll Rights Reserved. Table of Contents ssembly Instructions.......................2 Parts & Hardware
High-Pressure Fixed Displacement Radial Piston Pumps PR Series
HYDRULIC COMONENTS HYDROSTTIC TRNSMISSIONS GERBOXES - CCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODEN (ITLY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415 730 INTERNET:
R3( )RS: CALL OUT LAMPS FOR MURALS. EXISTING THEATRE REMOVE AND DISCARD CHANNEL LETTERS WITH NEON ILLUMINATION
RSN 688469 1 of 10 DEIE MOLTZ pproval / Revision / R1 (9-6-1)RS: SPRED OUT SPCING ITEM, MOVE EXISTING THETRE ERIL PHOTO - PLN VIEW OF EXISTING THETRE N.T.S. N.T.S. R4(10-18-1)RS: ENLRGE ITEM TO STD. SIZE.
SUNCOAST CREDIT UNION
INSTLLTION LOCTION OWNER OF RECORD: 0 E HILLSOROUGH VE TMP, FL 04 PV SYSTEM DT PV MODULES: POWER. KW C POWER KW INVERTER 0KW0KWKW MODULES SW W M: W.4"/L." RE:.04 SQFT WEIGHT:. L MEN ROOF HEIGHT: FT STRINGS:
ArrowAntennas.com Simply the Best
911 E. Fox Farm Rd. #2 Cheyenne, WY 82007 ArrowAntennas.com Simply the Best (307) 222-4712 info@arrowantennas.com 22.25 22.75 23.25 26 27.375 This antenna must be end mounted with the M/B Mounting Bracket
AWWA Grooved Fittings
WW Grooved Sumittl Form WW Grooved Fittings SUMITT INFORMTION PROECT NME: ENGINEER: CONTRCTOR: WW Grooved Fitting SPEC. SECTION: MEMER FETURES & DVNTGES Fittings supplied with rigid rdius grooves in ordne
FUEL SYSTEM. Table of Contents. Section 3B - Carburetors
Tle of Contents FUEL SYSTEM Section 3B - Cruretors CARBURETORS Fuel System - Trouleshooting.............. 3B-2 Generl Informtion.................... 3B-2 Attenutor And Cr Throttle Levers......... 3B-4
Installation Instruction
CIVCON MNIFOLD INSTLLTION MNUL REVISION 5/9/05 PETROLEUM MNIFOLD for TNK TRUCKS Installation Instruction Unit of Knappco, Inc. Phone: 86-74-6600 Fax: 86-74-06 CIVCON MNIFOLD INSTLLTION MNUL REVISION 5/9/05
Model AT Linear Anode System
Model T Linear node System Typical pplications: Underground and aboveground storage tanks, buried pipelines, elevator shafts, marine structures Featuring: Design flexibility - modular design permits multitude
A. ESD: Comply with sustainable design requirements including, without limitation, submittal and documentation requirements.
yrehalt VOLUTION May 07; Version. This product specification supersedes all previously issued documentation PROPRITRY ITM: YRHLT VOLUTION UTOMTIC OVRHD PRIMTR TYP RIC IR CURTIN PRT GNRL.0 SUMMRY. Section
Opposed Piston Differential Pressure Switches
Principles of Operation Opposed Piston Differential Pressure Switches General Instructions These instructions provide information for installation, electrical connection, process connection and calibration
Appendix E Head and Valve Assembly Details All D-Style Models 351
Appendix E Hed nd Vlve Assemly Detils All D-Style Models FD Hed Vlve Holddown Assemlies Suction (spec P) 0 0 Suction (spec P) 0 0 Dischrge (ll specs) 0 WFD Hed Appendix E Hed nd Vlve Assemly Detils All
1318/ V BATTERY SEPARATOR
ISIONS ECO DESCRIPTION DTE BY 001 4153 PRODUCTION RELESE 7/30/04 BF 002 5188 CHNGE TRQ FRM 60±10 TO 50±5 IN/LBS & DD e-mrk TO LBEL 7/16/08 BF 003 5355 DD TRNSIENT PROTECTION 1/16/09 JT 5369 REDUCE ESD
C400 (6 in.) GEAR OPERATED SQUEEZE-OFF TOOL FOR PE PIPE
1825 ECN1825 C400 (6 in.) GER OPERTED SQUEEZE-OFF TOOL FOR PE PIPE Squeezing Pipe Set the Gauge Plates (3) on each side of the tool to the specific pipe size and SDR value. (See Picture 3) Ensure the desired
Brockenhurst to Lymington
27 to Lymington Southmpton Centrl Yrmouth (Isle of Wight) Ferry Trin times 20 My to 8 December 208 Your timetble This timetble shows our services between, n with connecting services to n from Lonon Wterloo
Appendix Sections through bunds closest to Caton
Extension to Linhay Hill Quarry Environmental Statement - Regulation 22 Further Information ppendices ppendix 15.4 Sections through bunds closest to Caton tkins Environmental Statement - Regulation 22
Approved. Size L H. 3" (76mm) 9-1/2" (241mm) 5-51/64" (147mm) 46. 4" (102mm) 11-1/2" (292mm) 6-45/64" (170mm) 81
pproved. Model: SD-NRV200CV Flanged Ends The Flanged End Check Valves are made of Iron Body, Bolted Bonnet and Horizontal Swing, painted with standard color. Epoxy coated inside and outside to WW C550
Cobra. Mighty Mouse TECHNICAL SPECIFICATIONS
Mighty Mouse Cobra TECHNICL SPECIICTIONS 0-0 triple-start with self-locking coupling nut, exploded view How To Order Mighty Mouse Cobra Plug Connector and ackshell ssemblies Sample Part Number 0-0-2 ZNU
LA Metropolitan Transportation Auth. One Gateway Plaza Mail Stop Los Angeles, CA 90012
L Metropolitan Transportation uth. One Gateway Plaza Mail Stop 99-16-10 Los ngeles, C 90012 Phone: 213-922-7523 Fax: 213-922-7392 TRNSMITTL No. 00154 PROJECT: Regional Connector Preliminary Engin DTE:
LITTLE DAVID OWNERS MANUAL
LITTLE DVID OWNERS MNUL LDD/ CC / CC CRTRIDGES THE LOVESHW CORPORTION LOVESHW - EUROPE 0 ESTON TURNPIKE, OX UNIT 9, RUNEL GTE SOUTH CNN, P 9 W. PORTWY INDUSTRIL ESTTE NDOVER, HMPSHIRE SP0SL TEL: (0) 9-9
HORIZONTAL SLIDER - NON-IMPACT
2 /" FLNGE WIDTH " MX. UNIT WIDTH 3 /" MX. SSH WIDTH HORIZONTL SLIDER - NON-IMPT 3 /" MX. SSH WIDTH 3/" GLSS DLO 3/" GLSS DLO GENERL NOTES:. THE PRODUT SHOWN HEREIN IS DESIGNED ND MNUFTURED TO OMPLY WITH
DETAIL OF DUCT FABRICATION & SUPPORTS
DETIL OF DUT FRITION & SUPPORTS DESRIPTION IRNIN PETROLEUM STNDRDS NO REVISION PERMITTED UNLESS PPROVED Y STNDRD ORGNIZTION OVER SEET DRWING No. IPSDR013 ST 1 FIG. SUGGESTED SIZING DUT SIZE mm (in) ND
Plan Review Response Letter for Permit PVS02172 Tampa,
llen Gezelman, PE, CSICDT, LEEDP FL 980 88 State Road, # Lutz, FL 8 89099 www.gezelmanpe.com, allen@allengezelmanpe.com To: Hillsborough County 0 E. Kennedy lvd. Tampa, FL 0 uilding Permits Plan Review
Leading the way in advanced Diesel Particulate Filters. Exhaust Control Industries Air and noise pollution control specialists
Leading the way in advanced Diesel Particulate Filters Exhaust Control Industries ir and noise pollution control specialists Exhaust Control Industries Experts in advanced Diesel Particulate Filters Exhaust
SECTION A-A TPA AND ALIGNMENT PLATE IN PRE-SEATED POSITION
THIS RWING IS UNPULISHE. OPYRIGHT Y TE ONNETIVITY RELESE FOR PULITION LL RIGHTS RESERVE. P LTR ESRIPTION TE WN PV REVISE PER EO00 MR JMS H REVISE PER EO00 PR JMS H QTY. REQUIRE INEX INEX INEX LIST OF PRTS
NC7SVL08 TinyLogic Low-I CCT Two-Input AND Gate
NC7SL08 TinyLogic Low-I CCT Two-Input ND Gate Features 0.9 to 3.6 CC Supply Operation 3.6 Over-oltage Tolerant I/Os at CC from 0.9 to 3.6 Power-Off High-Impedance Inputs and Outputs Proprietary Quiet Series
EMERGENCY SHUTOFF AND FIRESAFE VALVES FIGURE 1075
EMERGENCY SHUTOFF ND FIRESFE VLVES FIGURE 1075 The Jamesbury brand FM (Factory Mutual) approved Emergency Shutoff and Firesafe Valves Figure 1075 are manual assemblies consisting of the Jamesbury Fire-Tite
EPICVUE CLAD-WOOD WINDOW GEOMETRIC - DIRECT SET TABLE OF CONTENTS
EPIVUE LD-WOOD WINDOW TLE OF ONTENTS rchitectural Design Manual 1 EPIVUE LD-WOOD WINDOW GENERL INFORMTION Standard Sizes & Designs EpicVue lad geometric windows are produced one-at-a-time to customer order,
AC INLETS & OUTLETS IEC 320 & MINI IEC CONNECTORS IEC SERIES
C INLETS & OUTLETS IEC 30 & MINI IEC CONNECTORS INTRODUCTION: dam Tech IEC & Mini IEC Series C Inlets and Outlets are primary power receptacles designed, manufactured, tested and approved to UL, CS, VDE
Pipe Fittings. HP Series
Pipe Fittings HP Series Contents Pipe Plug Hollow Hex Plug Close Nipple Special Pipe Nipple Hex Nipple Hex Long Nipple Reducing ushing Pipe Cap Hex Coupling Union all Joints Adaper Male lbow Street lbow
Designed for blow-off service in boiler systems with pressures of 3,206 psig.
Designed for blow-off service in boiler systems with pressures of 3,6 psig. General Description asic requirements for the design and use of blow-off valves are established by the SM Power oiler Code, Section
Lippman Park Suspended Bridge Wawarsing, NY
Lippman Park Suspended ridge Wawarsing, NY LOTION MP SLE: "=00' List of rawings Sheet No. escription RIGE LYOUT RIGE SSEMLY STNTION SSEMLY STNTION ETILS 5 RILING ETILS 6 EKING ETILS 7 SUSPENER LES 8 NHOR