MOBILE RECYCLING PRODUCT RANGE

Transcription

1 MOBILE RECYCLING PRODUCT RANGE WE CARE 1

2 Contents Mobile Recycling Produkt Range... 6 DW SERIES Shredders AK Series Grinders DZ Series Combined Shredder...24 SM Series Screens...28 DH Series Precision Chippers Biopress DBP 205 Screw Extruder DU Series Windrow Turner...46 Stationary Recycling Overview

3 DOPPSTADT CALBE GMBH Factory WE CARE 4 5

4 MOBILE Recycling Product Range Overview DW 2060 DW 2060 K BioPower DW 3060 optional: DW 3060 BioPower AK 635 SA DZ 750 DZ 750 K DW 3060 K optional: DW 3060 K BioPower optional: DW 3060 SA DW 3060 SA BioPower DW 3080 K3 SM 414 SM 414 K SM 518 AK 235 AK 510 BioPower AK 510 K BioPower SM 620 SM 620 E Hybrid SM 620 K AK 535 AK 635 AK 635 K SM 720 SM 1200 Triflex SM 1200 SA Triflex 6 7

5 MOBILE Recycling Product Range Overview DH 811 DH 811 L DH 812 DH 910 DH 910 K DH 910 SA DH 910 SA-B BioPress DBP 205 DU 265 DU

6 DW SERIES Shredders Powerful and flexible The shredding by means of roller and comb is suitable for the most difficult tasks. Roller teeth made of wear-resistant steel tear the material through the shredding comb. The comb opens automatically if necessary in order to avoid damages by large unshreddable contaminants. All the wear parts are quickly and easily replaceable. The engine and aggragates of the DW shredders are easily accessible from two sides. The ful direct drive with electric reversing function provides for a high throughput. The self-cleaning cooler is easily accessible and its noise level is very low thanks to the large lowspeed fan. With their rear conveyor, which can be folded out hydraulically, the DW shredders are ready to go in no time. Magnets for iron separation are also available optionally. A multifunctional display shows the machine data and enables a easy machine operation. An optional remote control is available Slip-on coupling 2 Central control panel 3 Hydraulic drive 6 4 Hinged cooler with reversible fan wheel 5 Maintenance 6 Feeding hopper, roller and shredding comb 7 Rear conveyor 8 with overband magnet* Main Advantages wide range of possible applications shredding of various materials high efficiency thanks to direct roller drive resistant against contaminants hydraulically controlled shredding comb, protection of the machine, high availability (contaminants are discharged) low fuel consumption due to direct drive can be combined with other Doppstadt products one-man operation (remote control of all main functions) Composting, waste wood, garbage and refuse-derived fuel processing, volume reduction Explanations and illustrations by the example of the DW 3060 *option Screening SM Series Optional: Fe-separation, windsifting and further processing 10 11

7 DW Series For difficult shredding problems DW 2060 DW 2060 K BioPower DW 3060 SA DW 3080 K3 The DW 2060 can be moved by means of the knob on the grab of a wheel loader. Its 2 m (6' 7") roller rotates at 32 rpm. 14 roller teeth and 15 comb teeth shred the materials. The DW 2060 K BioPower is a shredder with 28 teeth. It is a tracked version. The DW 3060 SA is equal to the DW 3060, but it is mounted on a semitrailer chassis. The DW 3080 K3 is a track driven machine with two speeds. Its 3 m (9' 10") roller rotates at 25 rpm. 21 roller teeth and 20 comb teeth shred the materials. Total weight approx. 15,000 kg (33,069 lb) Total weight approx. 20,000 kg (44,092 lb) 30,000 kg (66,139 lb) Total weight approx. 50,000 kg (110,231 lb) Mercedes-Benz OM 906 LA 150 kw (204 hp) at 2,200 rpm Mercedes-Benz OM 926 LA 240 kw (326 hp) at 2,200 rpm Mercedes-Benz OM 460 LA 315 kw (428 hp) at 2,000 rpm Mercedes-Benz OM502LA E3B 480 kw (653 hp) at 2,000 rpm Roller lenght no. of teeth 2,000 mm (6' 7'') 600 mm (2') 14 Roller lenght no. of teeth 2,000 mm (6' 7'') 600 mm (2') 28 Roller lenght no. of teeth 3,000 mm (9' 10'') 600 mm (2') 21 Roller lenght no. of teeth 3,000 mm (9' 10'') 800 mm (2' 7'') 21 6,640 / 2,230 / 2,500 mm (21' 9"/ 7' 4"/ 8' 2") 8,470 / 2,300 / 3,180 mm (27' 8"/ 7' 7"/ 10' 4") 9,210 / 2,550 / 3,940 mm (30' 3''/ 8' 4''/ 12' 11'') / 3,000 / 3,400 mm (36' 3''/ 9' 10''/ 11' 2'') Also available as DW 3060 SA BioPower: 360 kw (490 hp), Roller teeth: 42 DW 3060 The roller of the DW 3060 TYPE D has a length of 3 m (9' 10") and it rotates at 31 rpm. 21 roller teeth and 22 comb teeth shred the materials. Roller lenght no. of teeth 25,000 kg (55,116 lb) MTU 6R1300* 320 kw (435 hp) at 2,000 rpm 3,000 mm (9' 10'') 600 mm (2') 21 9,700 / 2,550 / 3,990 mm (31' 9''/ 8' 4''/ 13' 1'') Also available as DW 3060 BioPower: 360 kw (490 hp), Roller teeth: 42 DW 3060 K The DW 3060 K is equal to the DW 3060, but on tracks. Total weight Roller lenght no. of teeth approx. 30,000 kg (66,139 lb) MTU 6R1300* 320 kw (435 hp) at 2,000 rpm 3,000 mm (9' 10'') 600 mm (2') 21 10,120 / 2,800 / 3,200 mm (33' 2''/ 9' 2''/ 10' 6'') Also available as DW 3060 K BioPower: 360 kw (490 hp), Roller teeth: 42 * MTU engines are based on proven Mercedes-Benz engine technology 12 13

8 DW Series Technical Data DW 2060 DW 2060 K BioPower DW 3060 SA (optional: BioPower) DW 3060 K (optional: BioPower) L/W/H: 6,640 / 2,230 / 2,500 (21' 9" / 7' 4" / 8' 2") L/W/H: 8,470 / 2,300 / 3,180 (27' 8" / 7' 7" / 10' 4") L/W/H: 9,210 / 2,550 / 3,940 (30' 3" / 8' 4" / 12' 11") L/W/H: 10,120 / 2,800 / 3,200 (33' 2" / 9' 2" / 10' 6") DW 3060 (optional: BioPower) DW 3080 K3 L/W/H: 9,700 / 2,550 / 3,990 (31' 9" / 8' 4" / 13' 1") L/W/H: 11,040 / 3,000 / 3,400 (36' 3" / 9' 10" / 11' 2") Model dw 2060 dw 2060 K BioPower DW 3060 dw 3060 SA dw 3060 K dw 3080 K3 Weight approx. 15,000 kg (33,069 lb) approx. 20,000 kg (44,092 lb) max. 25,000 kg (55,116 lb) max. 30,000 kg (66,139 lb) approx. 30,000 kg (66,139 lb) approx. 50,000 kg (110,231 lb) Chassis hook lift frame track drive with two speeds central-axle trailer chassis with 3 axles for semitrailer chassis with 3 axles track drive with two speeds track drive with two speeds 80 km/h (50 mph), with ABS for 80 km/h (50 mph), with ABS Type Mercedes-Benz OM 906 LA Mercedes-Benz OM 926 LA MTU 6R1300* Mercedes-Benz OM 460 LA MTU 6R1300* Mercedes-Benz OM502LA E3B Power 150 kw (204 hp) at 2,200 rpm 240 kw (326 hp) at 2,200 rpm 320 kw (435 hp) at 2,000 rpm 315 kw (428 hp) at 2,000 rpm 320 kw (435 hp) at 2,000 rpm 480 kw (653 hp) at 2,000 rpm Exhaust level EUROMOT III A EUROMOT III B EUROMOT IV EUROMOT III B EUROMOT IV EUROMOT III B Cubic capacity 7,200 cm 3 7,200 cm 3 11,970 cm 3 11,970 cm 3 11,970 cm 3 15,930 cm 3 Tank fuel 300 l (79 gal) 300 l (79 gal) 2 x 300 l (2 x 79 gal) 2 x 300 l (2 x 79 gal) 2 x 300 l (2 x 79 gal) 700 l (185 gal) Roller Length 2,000 mm (6' 7") 2,000 mm (6' 7") 3,000 mm (9' 10") 3,000 mm (9' 10") 3,000 mm (9' 10") 3,000 mm (9' 10") Diameter 600 mm (2') 600 mm (2') 600 mm (2') 600 mm (2') 600 mm (2') 800 mm (2' 7") Speed 25/32 rpm 25/32 rpm 31 rpm 31 rpm 31 rpm 25 rpm Tooth width/-length 60/174 mm (2.4"/6.9") 60/174 mm (2.4"/6.9") 60/174 mm (2.4"/6.9") 60/174 mm (2.4"/6.9") 60/174 mm (2.4"/6.9") 60/174 mm (2.4"/6.9") No. of teeth Comb Length 2,000 mm (6' 7") 2,000 mm (6' 7") 3,000 mm (9' 10") 3,000 mm (9' 10") 3,000 mm (9' 10") 3,000 mm (9' 10") Tooth width 60 mm (2.4") 60 mm (2.4") 60 mm (2.4") 60 mm (2.4") 60 mm (2.4") 60 mm (2.4") No. of teeth Discharge conveyors (bended conveyor) lower belt rear belt lower belt rear belt lower belt rear belt lower belt rear belt lower belt rear belt Width 800 mm (2' 7") 800 mm (2' 7") 1,000 mm (3' 3") 1,000 mm (3' 3") 1,200 mm (3' 11") 1,000 mm (3' 3") 1,200 mm (3' 11") 1,000 mm (3' 3") 1,200 mm (3' 11") 1,000 mm (3' 3") 1,200 mm (3' 11") Length 8,500 mm (27' 11") 2,410 mm (7' 11") 5,000 mm (16' 5") 3,335 mm (10' 11") 5,500 mm (18' 5") 4,000 mm (10' 11") 7,000 mm (23') 3,335 mm (10' 11") 7,000 mm (23') 4,000 mm (13' 1") 7,000 mm (23') max. Belt speed m/s (ft in/s) 2.2 (7' 3") 2.6 mm (8' 6") 2.8 mm (9' 2") 2.2 mm (7' 3") 2.3 mm (7' 7") 2.2 mm (7' 3") 2.3 mm (7' 7") 2.2 mm (7' 3") 2.3 mm (7' 7") 1.8 mm (5' 11") 2.3 mm(7' 7") Standard equipment Options roller tooth 174 (6.9") C, armored comb tooth remote control, damping facility, hopper extensions, overband magnet, magnetic pulley, additional hydraulic connection roller tooth 174 (6.9") C, armored c omb tooth, remote control, additional hydraulic connection hopper extensions, comb extension, overband magnet, damping facility, comb basket system As of October 2014 subject to technical alterations. All are in mm (ft/in). The specifications are approximate. Illustrations and descriptions may include options that are not part of the standard equipment. roller tooth 174 (6.9") C, armored comb tooth, additional hydraulic connection 20l (4.3 gal) & 70l (15,3 gal) remote control, twin drive, damping facility, hopper extensions, comb basket system, comb extension, overband magnet, magnetic pulley, etc roller tooth 174 (6.9") C, armored comb tooth, additional hydraulic connection 20l (4.3 gal) & 70l (15,3 gal) remote control, twin drive, damping facility, hopper extensions, comb basket system, comb extension, overband magnet, magnetic pulley roller tooth 174 (6.9") C, armored comb tooth, remote control, damping facility, additional hydraulic connection 20l (4.3 gal) & 70l (15,3 gal) twin drive, hopper extensions, comb basket system, comb extension, overband magnet, magnetic pulley Option BioPower: stronger drive unit (bigger gear box); Power: 360 kw (490 hp) at 2,000 rpm; Roller Speed: 28 rpm; Roller Teeth: 42 roller tooth 174 (6.9") C, basket system incl. fine basket, armored comb tooth, remote control, damping facility, additional hydraulic connection 20l (4.3 gal) & 40l (8,8 gal) hopper extensions, comb extension, magnetic pulley, neodym magnet * MTU engines are based on proven Mercedes-Benz engine technology 14 15

9 AK SERIES Grinders POWERFUL AND VERSATILE The high throughput and the patented load- Hydraulic support, controlled without engine sensing material feed permit using the machine by an electric 24 Volt pump. for various grinding tasks. Whatever your Short setup times (< 10 min.) application: With the AK you will achieve an thanks to the hydraulically foldable dis- optimum and efficient recovery of secondary raw materials. charge conveyor*, The Doppstadt grinders stand out for their freeswinging flail holders with separately replaceable pulley for Fe-sepa- optional magnetic wearing tools and the heavy gyrating mass of the ration*. flail working at approx. 1,000 rpm. 2 1 Slip-on coupling 2 Hinged cooler 3 Scraper floor 5 4 Feed-in roller 5 Flail with freeswinging flails Baffle plate 6 Grinding basket 7 Hydraulic drive 8 Rear conveyor 9 with overband magnet* Main Advantages continuous grinding by means of load-sensing material in-feed resistant against contaminants thanks to free-swinging flails individually replaceable wearing tools (flails) quick-changing system for grinding basket minimized dust and noise emissions in the drive area thanks to the separation of drive and grinding unit can be combined with other Doppstadt products Easy maintenance thanks to large protection doors on all sides and central lubrication one-man operation (remote control of all main functions) Separate drives for scraper floor and feed-in roller optimizing the material feeding and the throughput Composting, waste wood processing Explanations and illustrations by the example of the AK 635 *option Optional: Fe-separation, windsifting and further processing pre-shredded pre-shredded 16 17

10 AK Series ONE GRINDER MANY POSSIBLE APPLICATIONS AK 235 AK 510 BioPower AK 635 AK 635 K The flail weight of the AK 235 is approx. 1,3 t (2,866 lb). It is equipped with 16 free-swinging flails and 28 teeth and it rotates at approx. 1,200 rpm. Grinding basket mesh sizes from mm ( '') available. The flail weight of the AK 510 BioPower is approx. 2,5 t (5,512 lb) and it rotates at approx. 1,000 rpm. The replaceable grinding basket can be equipped with mesh sizes from mm ( "). The flail weight of the AK 635 is approx. 2,5 t (5,512 lb) and it rotates at approx. 1,000 rpm. The grinding basket can be equipped with mesh sizes from mm ( "). The AK 635 K is equal to the AK 635, but on tracks with hydraulic drive. Flail width flails/teeth 15,000 kg (33,069 lb) Mercedes-Benz OM 926 LA 175 kw (239 hp) at 2,200 rpm 1,480 mm (4' 10'') 900 mm (2' 11'') 16/28 9,230 / 2,110 / 3,100 mm (30' 3''/ 6' 11''/ 10' 12'') Flail width no. of flails 19,000 kg (41,888 lb) Mercedes-Benz OM 460 LA 375 kw (510 hp) at 2,000 rpm 1,750 mm (5' 9'') 1,100 mm (3' 7'') 36 9,700 / 2,500 / 3,960 mm (31' 10''/ 8' 2''/ 13') Flail width no. of flails 25,000 kg (55,116 lb) Mercedes-Benz OM 502 LA 440 kw (598 hp) at 2,000 rpm 1,750 mm (5' 9') 1,100 mm (3' 7'') 36 11,235 / 2,500 / 3,750 mm (36' 10"/ 8' 2"/ 12' 4") Flail width no. of flails 32,000 kg (70,548 lb) Mercedes-Benz OM 502 LA 480 kw (653 hp) at 2,000 rpm 1,690 mm (5' 7") 1,100 mm (3' 7") 36 10,025 / 3,000 / 3,390 mm (32' 11"/ 9' 10"/ 11' 1") Picture: machine without rear conveyor AK 510 K BioPower The AK 510 K BioPower is equal to the AK 510 BioPower, but on tracks with hydraulic drive. AK 535 The flail weight of the AK 535 is approx. 2,5 t (5,512 lb) and it rotates at approx. 1,000 rpm. The permissible weight of the central-axle trailer chassis with 3 axles is 22,000 kg. AK 635 SA The flail weight of the AK 635 SA is approx. 2.5 t (5,512 lb) and it rotates at approx. 1,000 rpm. The grinding basket can be equipped with mesh sizes from mm ( "). Total weight approx. 29,000 kg (63,934 lb) 22,000 kg (48,502 lb) 30,000 kg (66,139 lb) Mercedes-Benz OM 460 LA 375 kw (510 hp) at 2,000 rpm Mercedes-Benz OM 460 LA 375 kw (510 hp) at 2,000 rpm Mercedes-Benz OM 502 LA 440 kw (598 hp) at 2,000 rpm Flail width no. of flails 1,750 mm (5' 9'') 1,100 mm (3' 7'') 36 Flail width no. of flails 1,750 mm (5' 9'') 1,100 mm (3' 7'') 36 Flail width no. of flails 1,750 mm (5' 9") 1,100 mm (3' 7") 36 8,680 / 3,000 / 3,390 mm (28' 6''/ 9' 10''/ 11' 1'') 9,885 / 2,540 / 3,750 mm (32' 5''/ 8' 4''/ 12' 4'') 12,410 / 2,500 / 3,930 mm (40' 9"/ 8' 2"/ 12' 11") 18 19

11 AK Series Technical Data AK 235 AK 510 BioPower AK 510 K BioPower AK 535 2,110 6' 11" 2,540 8' 1" L/W/H: 9,230 / 2,110 / 3,100 (30' 3"/ 6' 11"/ 10' 2") L/W/H: 9,700 / 2,500 / 3,960 ( 31' 10"/ 8' 2"/ 13') L/W/H: 8,680 / 3,000 / 3,390 (28' 6"/ 9' 10"/ 11' 1") L/W/H: 9,885 / 2,540 / 3,750 (32' 5"/ 8' 1"/ 12' 4") Model AK 235 AK 510 BioPower AK 510 K BioPower AK 535 Weight max. 15,000 kg (33,069 lb) max. 19,000 kg (41,888 lb) approx. 29,000 kg (63,934 lb) max. 22,000 kg (48,502 lb) Chassis central-axle trailer chassis with 2 axles, central-axle trailer chassis with 2 axles, track drive with two speeds central-axle trailer chassis with 3 axles, for 80 km/h (50 mph), with ABS for 80 km/h (50 mph), with ABS for 80 km/h (50 mph), with ABS (optional electric motor) (optional electric motor) Type Mercedes-Benz OM 926 LA Mercedes-Benz OM 460 LA Mercedes-Benz OM 460 LA Mercedes-Benz OM 460 LA Power 175 kw (239 hp) at 2,200 rpm 375 kw (510 hp) at 2,000 rpm 375 kw (510 hp) at 2,000 rpm 375 kw (510 hp) at 2,000 rpm max. torque 850 Nm at 1,200 1,600 rpm 2,200 Nm at 1,300 rpm 2,200 Nm at 1,300 rpm 2,200 Nm at 1,300 rpm Exhaust level EUROMOT III B EUROMOT III B EUROMOT III B EUROMOT III B Fuel tank 215 l (57 gal) 450 l (119 gal) 600 l / 159 gal 600 l / 159 gal Flail Width 1,480 mm (4' 10") 1,750 mm (5' 9") 1,750 mm (5' 9") 1,750 mm (5' 9") Diameter 900 mm (2' 11") 1,100 mm (3' 7") 1,100 mm (3' 7") 1,100 mm (3' 7") Weight (with flail tips) approx. 1,310 kg (2,888 lb) approx. 2,500 kg (5,512 lb) approx. 2,500 kg (5,512 lb) approx. 2,500 kg (5,512 lb) Speed (depending on engine speed) 1,140 1,320 rpm 850 1,000 rpm 850 1,000 rpm 850 1,000 rpm No. of flails / teeth 16 / Flail weight (incl. tip) approx kg (31 lb) approx kg (31 lb) approx kg (31 lb) approx kg (31 lb) max. infeed height 530 mm (1' 9") 650 mm (2' 2") 650 mm (2' 2") 650 mm (2' 2") Discharge conveyor Length 5,250 mm (17' 3") 4,000 mm (13' 1") 7,000 mm (23') 6,000 mm (19' 8") Width 1,500 mm (4' 11") 1,800 mm (5' 11") 1,500 mm (4' 11") 1,800 mm (5' 11") Belt speed 2.0 m/s (6' 7"/s) 1.8 m/s (5' 3"/s) 1.6 m/s (5' 3"/s) 1.8 m/s (5' 3"/s) Discharge height 3,000 mm (9' 10") 3,000 mm (9' 10") 4,500 mm (14' 9") 4,200 mm (13' 9") Standard equipment grinding basket, available mesh sizes mm ( ") or re-grinding comb with hood grinding basket, available mesh sizes mm ( "), remote control grinding basket, available mesh sizes mm ( "), additional hydraulic connection additional hydraulic connection, remote control, grinding basket, a vailable mesh sizes mm ( "), twin drive Options remote control, additional hydraulic connection, twin drive, magnetic pulley, overband magnet, damping facility, baffle plate with cutting bar As of October 2014 subject to technical alterations. The specifications are approximate. Illlustrations and descriptions may include options that are not part of the standard equipment. additional hydraulic connection, magnetic pulley, overband magnet, twin drive, damping facility, fine shredding comb, fuel tank 600 l / 159 gal, baffle plate with cutting bar remote control, overband magnet, magnetic pulley, twin drive, damping facility, fine shredding comb, baffle plate with cutting bar hydraulic self-propelled drive, overband magnet, magnetic pulley, damping facility, fine shredding comb, baffle plate with cutting bar 20 21

12 AK Series Technical Data AK 635 AK 635 K AK 635 SA 11,235 36' 10" 17,200 56' 5" L/W/H: 11,235 / 2,500 / 3,750 (36' 10"/ 8' 2"/ 12' 4") L/W/H: 10,025 / 3,000 / 3,390 (32' 11"/ 9' 10"/ 11' 1") L/W/H: 12,410 / 2,500 / 3,930 (40' 9"/ 8' 2"/ 12'11") Model AK 635 AK 635 K AK 635 SA Weight max. 25,000 kg (55,116 lb) max. 25,000 kg (70,548 lb) Chassis central-axle trailer chassis with 3 axles, for 80 km/h (50 mph), with ABS track drive with two speeds Type Mercedes-Benz OM 502 LA Mercedes-Benz OM 502 LA Power 440 kw (598 hp) at 2,000 rpm 480 kw (653 hp) at 2,000 rpm max. torque 2,800 Nm at 1,300 rpm 3,000 Nm at 1,300 rpm Exhaust level EUROMOT III B EUROMOT III B Fuel tank 750 l (198 gal) 750 l (198 gal) Flail Width 1,750 mm (5' 9") 1,690 mm (5' 7") Diameter 1,100 mm (3' 7") 1,100 mm (3' 7") Weight (with flail tips) approx. 2,500 kg (5,512 lb) approx. 2,500 kg (5,512 lb) Speed (depending on engine speed) 970 1,140 rpm 970 1,140 rpm No. of flails / teeth Flail weight (incl. tip) approx kg (31 lb) approx kg (31 lb) max. infeed height 650 mm (2' 2") 650 mm (2' 2") Discharge conveyor Length 6,150 mm (20' 2") 7,000 mm (23') Width 1,500 mm (4' 11") 1,500 mm (4' 11") Belt speed 2.2 m/s (7' 3"/s) 2.0 m/s (6' 7"/s) Discharge height 4,500 mm (14' 9") 4,500 m (14' 9") Standard equipment additional hydraulic connection, remote control, grinding basket, available mesh sizes mm ( "), twin drive additional hydraulic connection, remote control, grinding basket, available mesh sizes mm ( "), twin drive Options hydraulic self-propelled drive, overband magnet, magnetic pulley, damping facility, baffle plate with cutting bar overband magnet, magnetic pulley, damping facility, baffle plate with cutting bar max. 30,000 kg (66,139 lb) 3-axle-semitrailer chassis, for 80 km/h (50 mph), with ABS Mercedes-Benz OM 502 LA 440 kw (598 hp) at 2,000 rpm 2,800 Nm at 1,300 rpm EUROMOT III B 900 l (238 gal) 1,750 mm (5' 9") 1,100 mm (3' 7") approx. 2,500 kg (5,512 lb) 970 1,140 rpm 36 approx kg (31 lb) 650 mm (2' 2") 7,000 mm (23') 1,500 mm (4' 11") 2.0 m/s (6' 7"/s) 4,500 mm (14' 9") additional hydraulic connection, remote control, grinding basket, available mesh sizes mm ( "), rear conveyor, twin drive, damping facility overband magnet, magnetic pulley, baffle plate with cutting bar As of October 2014 subject to technical alterations. The specifications are approximate. Illlustrations and descriptions may include options that are not part of the standard equipment

13 DZ SERIES Shredder 2 in Powerful and flexible 2 in 1 The DZ 750 solves difficult shredding problems by the combination of two proceses in one machine: shredding by the well-proven low-speed principle complemented by the high-speed grinding process by flail and grinding basket. The grinding unit is fed by the load-sensing, reversible conveying system consisting of ascending conveyor, scraper floor and feed-in roller. After each of both working steps the iron fraction is separated by means of overband magnets. The whole machine is driven by a ful Mercedes-Benz engine with high efficiency. The robust construction designed for a long service life, the exclusive use of high-quality materials and a high standard of workmanship ensure a cost-efficient use even in the long term Feeding hopper, roller and shredding comb 2 Feed-in roller 3 Baffle plate and Flail with free-swinging flails 4 GRINDING basket 5 Swing-out cooler with reversible fan wheel 6 Integrated metal separation 7 Maintenance 8 Rear conveyor with overband magnet 9 Central control panel 2 3 Main Advantages shredding and grinding in one machine extremely versatile shredding of various materials hydraulically controlled shredding comb, therefore protection of the machine, high availability (contaminants are discharged) continuous shredding by load-sensing material in-feed individually replaceable wear parts possibility of combination with other Doppstadt products one-man-operation Composting, waste wood, garbage and refuse-derived fuel processing, Volume reduction Screening SM Series 6 *option Optional: Fe-separation, windsifting and further processing 24 25

14 DZ SERIES Technical Data DZ 750 3,980 13' 1" DZ 750 K Masszeichnung DZ 750 K einfügen! DZ 750K 13,550 44' 5" 2,550 8' 4" + Korrektur maße L/W/H: 13,550 / 2,550 / 3,980 (44' 5"/ 8' 4"/ 13' 1") L/W/H: 13,500 / 3,000 / 3,690 (44' 3"/ 9' 10"/ 12' 1") Model dz 750 dz 750 K Weight max. 46,000 kg (101,413 lb) max. 53,000 kg (116,845 lb) Chassis 4-axle-semitrailer chassis, for 80 km/h track drive with two speeds (50 mph), with ABS Type Mercedes-Benz OM 502 LA Mercedes-Benz OM 502 LA Nominal 480 kw (652 hp) at 1,900 rpm 480 kw (652 hp) at 1,900 rpm Exhaust standard EUROMOT III A EUROMOT III A Cubic capacity 15,930 cm 3 (730 in 3 ) 15,930 cm 3 (730 in 3 ) Tank capacity 800 l (211 gal) 900 l (238 gal) Roller shredding Roller: Length 3,000 mm (9' 10") 3,000 mm (9' 10") Diameter 600 mm (2') 600 mm (2') Speed 25 rpm 25 rpm Tooth width/length 60/174 mm (2' 4"/ 6' 9") 60/174 mm (2' 4"/ 6' 9") No. of teeth Comb: Length 3,000 mm (9' 10") 3,000 mm (9' 10") Tooth width 60 mm (2') 60 mm (2') No. of teeth Falil Width 1,750 mm (5' 9") 1,750 mm (5' 9") Diameter 1,100 mm (3' 7") 1,100 mm (3' 7") Weight approx. 2,500 kg (5,512 lb) approx. 2,500 kg (5,512 lb) Speed 970 1,140 rpm (depending on engine speed) 970 1,140 rpm (depending on engine speed) No. of flails Flail weight (incl. tip) approx kg (30.9 lb) approx kg (30.9 lb) Discharge conveyor Width 1,500 mm (4' 11") 1,500 mm (4' 11") Length 7,000 mm (23') 6,000 mm (19' 8") Belt speed max. 2.1 m/s (6' 11"/s) 2.1 m/s (6' 11"/s) Discharge height approx. 4,100 mm (13' 5") approx. 4,100 mm (13' 5") Metal separation two overband magnets (coarse and fine) two overband magnets (coarse and fine) Options damping facility in roller area, hopper heightening, electr. conveyor heating (lower conv. of shredder & grinder, lifting conv.) damping facility in roller area, hopper heightening, electr. conveyor heating (lower conv. of grinder) As of October 2014 subject to technical alterations. All are in mm (ft/in). The specifications are approximate. lllustrations and descriptions may include options that are not part of the standard equipment

15 SM SERIES Screens Optimum Screening The rotating can even screen the most difficult materials making the best possible use of the load-sensing material feed and the large screening surface. The Doppstadt screens with modular design can be adjusted to special tasks. They are extremely mobile and can easily be controlled by one operator. Due to the sprocket drive, the can be changed very easily. By means of a stonegrid or vibrating screen or with the star screen above the hopper, a third fraction can be separated. The hydraulically controlled discharge conveyors are ready to go within less than five minutes. A rotating, hydraulically controlled brush cleans the automatically. The machine level is adjustable for stability and a good throughput. If the machine must be moved, a slip-on coupling for the drawbar is available. 2 1 Slip-on coupling 2 Drum 3 Cleaning brush 4 Maintenance 3 5 Swing-out drive unit 6 Central Control panel 7 Screening 8 Rear and side conveyor 8 Main Advantages load-sensing material feed to the swing-out drive unit for easy maintenace quick and easy change many available options to meet various requirements hydraulically controlled cleaning brush can be combined with other Doppstadt products one-man operation (remote control of all main functions) Composting, waste wood, garbage and RDF processing, volume reduction Grinding 5 8 Explanations and illustrations by the example of the SM 620 *option Optional: Fe-separation, windsifting and further processing 28 29

16 SM Series Optimum SEPARATION with doppstadt screens SM 414 SM 414 K SM 620 E Hybrid SM 620 K The of the SM 414 has a length of approx. 4.2 m (13' 9") and a of 1.4 m (4' 7"). For different applications various mesh sizes are available. Screening surface 15,9 m 2. The SM 414 K is equal to the SM 414, but it is mounted on a tracklaying chassis. The SM 620 E Hybrid has a screen with 2 m (6' 7") dia meter and approx. 6 m (19' 8") length. Screening surface 30,2 m 2. alternatively by diesel motor or AC generator or via connection to main electric supply. The SM 620 K is equal to the SM 620. But it is selfpropelled on tracks. 10,500 kg (23,149 lb) 12,000 kg (26,455 lb) approx. 19,000 kg (41,888 lb) approx. 24,000 kg (52,911 lb) Drum length Caterpillar C kw (41 hp) at 2,000 rpm 4,200 mm (13' 9") 1,400 mm (4' 7") 10,470 / 2,190 / 3,820 mm (34' 4"/ 7' 2"/ 12' 6") Drum length Caterpillar C kw (46 hp) at 2,400 rpm 4,200 mm (13' 9") 1,400 mm (4' 7") 9,910 / 2,500 / 3,400 mm (32' 6"/ 8' 2"/ 11' 2") AC synchronous generator 80 kva or electric connection 400 V/125 A Drum length 5,440 mm (17' 10") 2,000 mm (6' 7") 11,810 / 2,550 / 4,000 mm (38' 9"/ 8' 4"/ 13' 1") Drum length DEUTZ TCD 3.6 L4 90 kw (122 hp) at 2,000 rpm 5,500 mm (18') 2,000 mm (6' 7") 11,450 / 3,000 / 3,450* mm (37' 7"/ 9' 10"/ 11' 3"*) * lowered in transport position SM 518 SM 620 SM 720 The SM 518 has a screening surface of 22,5 m 2. The screen has a of 1,8 m (5' 11") and a length of approx. 5 m (16' 5"). Optionally skeletal s with changeable screens are available. For different applications various mesh sizes are available. The SM 620 has a screen with 2 m (6' 7") and approx. 6 m (19' 8") length. For different applications various mesh sizes are available. Screening surface 30,2 m 2. The SM 720 has a screen with 2 m (6' 7") and approx. 7 m (22' 12") length. For different applications various mesh sizes are available. A third fraction can be separated by using a vibrating grid, a hopper star screen or a stonegrid. Screening surface 38,8 m 2. Total weight 17,000 kg (37,479 lb) 19,000 kg (41,888 lb) 24,000 kg (52,911 lb) Drum length DEUTZ TCD 2.9 L4 55 kw (75 hp) at 2,200 rpm 4,700 mm (15' 5") 1,800 mm (5' 11") 10,900 / 2,500 / 4,000 mm (35' 9"/ 8' 2"/ 13' 1") Drum length DEUTZ TCD 3.6 L4 90 kw (122 hp) at 2,000 rpm 5,500 mm (18') 2,000 mm (6' 7") 11,810 / 2,550 / 4,000 mm (38' 9"/ 8' 4"/ 13' 1") Drum length DEUTZ TCD 3.6 L4 90 kw (122 hp) at 2,000 rpm 7,100 mm (23' 4") 2,000 mm (6' 7") 12,210 / 2,550 / 4,000 mm (40' 1"/ 8' 4"/ 13' 1") 30 31

17 SM Series Technical Data SM 414 SM 414 K SM 620 SM 620 E Hybrid 3,190 10' 6" 30 5,000 16' 5" 3,260 10' 8" 2,600 8' 6" 5,000 16' 5" 26 2,700 8' 10" 3,611 11' 10" 2,193 7' 2" 3,000 9' 10" 30 3,260 10' 8" 2,700 8' 10" 3,000 9' 10" 29 1,750 5' 9" 3,400 11' 2" E 13,960 46' 10,470 34' 4" 2,190 7' 2" 10,579 34' 8" 9,910 32' 6" 2,200 7' 3" 2,500 8' 2" L/W/H: 10,470 / 2,190 / 3,611 (34' 4"/ 7' 2"/ 11' 10") L/W/H: 9,910 / 2,500 / 3,400 (32' 6"/ 8' 2"/ 11' 2") L/W/H: 11,810 / 2,550 / 4,000 (38' 9"/ 8' 4"/ 13' 1") L/W/H: 11,810 / 2,550 / 4,000 (38' 9"/ 8' 4"/ 13' 1") SM 518 SM 620 K SM 720 5,500 18' 1" 3,780 (3,480) 12'5'' (11'5'') 5,600 18' 2" 3,450 11' 4" 30 2,790 9'2'' 30 3,355 11' 4,000 13' 1" 14,720 48' 3" 10,900 35' 9" 2,500 8' 2" L/W/H: 10,900 / 2,500 / 4,000 (35' 9"/ 8' 2"/ 13' 1") L/W/H: 11,450 / 3,000 / 3,450 (37' 7"/ 9' 10"/ 11' 3") L/W/H: 12,210 / 2,550 / 4,000 (40' 1"/ 8' 4"/ 13' 1") Modell SM 414 SM 414 K SM 518 SM 620 SM 620 E Hybrid SM 620 K SM 720 Weight 10,500 kg (23,149 lb) 12,000 kg (26,455 lb) max. 17,000 kg (37,479 lb) max. 19,000 kg (41,888 lb) max. 19,000 kg (41,888 lb) approx. 24,000 kg (52,911 lb) max. 24,000 kg (52,911 lb) Chassis 2-central-axle trailer chassis, tracklaying chassis track drive with two speeds semitrailer chassis with 2 axles, for 80 km/h (50 mph) with ABS for 80 km/h (50 mph) with ABS central-axle trailer chassis with 2 axles, for 80 km/h (50 mph) with ABS central-axle trailer chassis with 2 axles, for 80 km/h (50 mph) with ABS central-axle trailer chassis with 2 axles, for 80 km/h (50 mph) with ABS diesel generator Type Caterpillar C 2.2 [optional: electric motor] Caterpillar C 2.2 DEUTZ TCD 2.9 L4 [optional: electric motor] DEUTZ TCD 3.6 L4 [optional: electric motor] AC synchronous generator DEUTZ TCD 3.6 L4 DEUTZ TCD 3.6 L4 [optional: electric motor] Power 30 kw (41 hp) at 2,000 rpm 34 kw (46 hp) at 2,400 rpm 55 kw (75 hp) at 2,200 rpm 90 kw (122 hp) at 2,000 rpm 80 kva or electric connection 90 kw (122 hp) at 2,000 rpm 90 kw (122 hp) at 2,000 rpm 400 V/125 A Torque max. 143 Nm max. 143 Nm max. 300 Nm 480 Nm at 1,600 rpm max. 400 Nm 480 Nm at 1,600 rpm 480 Nm at 1,600 rpm Exhaust level EUROMOT III A EUROMOT III A EUROMOT III B / Tier 4i EUROMOT III B / Tier 4i EUROMOT III B / Tier 4i EUROMOT III B / Tier 4i Fuel tank 100 l (26 gal) 100 l (26 gal) 300 l (79 gal) 300 l (79 gal) 300 l (79 gal) 300 l (79 gal) 300 l (79 gal) Drum 2 screening fractions, 3rd fraction by means of stonegrid 2 screening fractions, 3rd fraction by means of stonegrid 2 screening fractions, Option: 3rd fraction by means of stonegrid, vibrating screen or hopper star screen; 4th fraction by means of a windsifter at the rear conveyor 2 screening fractions, Option: 3rd fraction by means of stonegrid, vibrating screen or hopper star screen; 4th fraction by means of a windsifter at the rear conveyor 2 screening fractions, Option: 3rd fraction by means of stonegrid, vibrating screen or hopper star screen; 4th fraction by means of a windsifter at the rear conveyor 2 screening fractions, Option: 3rd fraction by means of stonegrid, vibrating screen or hopper star screen; 4th fraction by means of a windsifter at the rear conveyor 2 screening fractions, Option: 3rd fraction by means of stonegrid, vibrating screen or hopper star screen; 4th fraction by means of a windsifter at the rear conveyor Diameter 1,400 mm (4' 7") 1,400 mm (4' 7") 1,800 (5' 11") 2,000 mm (6' 7") 2,000 mm (6' 7") 2,000 mm (6' 7") 2,000 mm (6' 7") Length 4,200 mm (13' 9") 4,200 mm (13' 9") 4,700 mm (15' 5") 5,500 mm (18') 5,440 mm (17' 10") 5,500 mm (18') 7,100 mm (23' 4") Mesh size selectable, mm ( ") selectable, mm ( ") selectable, mm ( ") selectable, mm ( ") selectable, mm ( ") selectable, mm ( ") selectable, mm ( ") Mesh type selectable (staggered squares, round holes) selectable (staggered squares, round holes) selectable (staggered squares, round holes) selectable (staggered squares, round holes) selectable (staggered squares, round holes) selectable (staggered squares, round holes) selectable (staggered squares, round holes) Drum wall thickness selectable, 6 10 mm ( ") selectable, 6 10 mm ( ") selectable, 6 12 mm ( ") selectable, 6 12 mm ( ") selectable, 6 12 mm ( ") selectable, 6 12 mm ( ") selectable, 6 15 mm ( ") Drum speed 0 21 rpm 0 21 rpm 0 21 rpm 0 18 rpm 0 18 rpm 0 18 rpm 0 18 rpm Feeding hopper Feeding volume 3.0 m 3 (106 ft 3 ) 3.0 m 3 (106 ft 3 ) 5.0 m 3 (177 ft 3 ) 5.0 m 3 (177 ft 3 ) 5.0 m 3 (177 ft 3 ) 5.0 m 3 (177 ft 3 ) 5.0 m 3 (177 ft 3 ) Feeding width/height 3,260 / 2,600 mm (10' 8"/ 8' 6") 3,260 / 2,700 mm (10' 8"/ 8' 10") 3,780 / 2,790 mm (12' 5"/ 9' 2") 3,780 / 2,830 mm (12' 5"/ 9' 3") 3,780 / 2,940 mm (12' 5"/ 9' 8") 3,780 / 2,890 mm (12' 5"/ 9' 6") 3,780 / 2,900 mm (12' 5"/ 9' 6") Discharge conveyors rear side rear side rear side rear side rear side rear side rear side Length [*option] 3,000 mm (9' 10") 3,000 mm (9' 10") [5,000 (16' 5")*] [5,000 (16' 5")*] 3,000 mm (9' 10") 3,000 mm (9' 10") [5,000 (16' 5")*] [5,000 (16' 5")*] 5,500 mm (18' 1") 5,500 mm (18' 1") [3,000 (9' 10")*] [3,000 (9' 10")*] 4,750 mm (15' 7") 4,750 mm (15' 7") [3,000 (9' 10")*] 4,750 mm (15' 7") 4,750 mm (15' 7") [3,000 (9' 10")*] 4,750 mm (15' 7") 4,750 mm (15' 7") 4,750 mm (15' 7") 4,750 mm (15' 7") Width 800 mm (2' 7") 600 mm (2') 800 mm (2' 7") 600 mm (2') 800 mm (2' 7") 800 mm (2' 7") 1,000 mm (3' 3") 1,000 mm (3' 3") 1,000 mm (3' 3") 1,000 mm (3' 3") 1,000 mm (3' 3") 1,000 mm (3' 3") 1,000 mm (3' 3") 1,000 mm (3' 3") Belt speed m/s (ft in/s) 0.8 (2' 7") 2.0 (6' 7") 1.0 (3' 3") 2.4 (7' 10") 1.3 (4' 3") 2.7 (8' 10") 1.4 (4' 7") 2.8 (9' 2") 1.3 (4' 3") 2.0 (6' 7") 0.9 (2' 11") 2.1 (6' 11") 1.1 (3' 7") 2.8 (9' 2") Options e.g. stone grid, remote control, different conveyor lengths, additional hydraulic connections, magnetic pulleys at the side and rear conveyor, skeletal on request stone grid, remote control, different conveyor lengths, additional hydraulic connections, magnetic pulleys at the side and rear conveyor, skeletal on request star screen module, stonegrid, vibrating grid or hopper star screen, remote control, additional hydraulic connections, magnetic pulleys at the side and rear conveyor, winter equipment, other conveyor lengths, windsifter over rear conveyor, skeletal star screen module, stonegrid, vibrating screen or hopper star screen, remote control, additional hydraulic connections, magnetic pulleys at the side and rear conveyor, windsifter over rear conveyor, skeletal star screen module, stonegrid, remote control, additional electric connections, magnetic pulleys at the side and rear conveyor, skeletal star screen module, stonegrid, vibrating screen or hopper star screen, remote control, additional hydraulic connections, magnetic pulleys at the side and rear conveyor, windsifter over rear conveyor, skeletal stonegrid, vibrating screen or hopper star screen, remote control, additional hydraulic connections, magnetic pulleys at the side and rear conveyor, windsifter over rear conveyor, skeletal As of October 2014 subject to technical alterations. All are in mm (ft/in). The specifications are approximate. *option Illustrations and descriptions may include options that are not part of the standard equipment

18 SM Series TECHNICAL DATA SM 1200 Triflex Star Screen SM 1200 Triflex The Doppstadt star screen SM 1200 Triflex is a ful and efficient star screen. On a robust steel frame, there are two screening levels with a series of screening shafts with numerous star-shaped discs. The material to be screened is charged into the hopper. From the conveying floor it is transported to the coarse screening deck by means of a material conditioner. The coarse screening deck carries out the first step of material separation. The medium fraction falls through the gaps of the star screener while the oversize is transported from one star shaft to the next and finally discharged. SM 1200 Triflex Powerful and efficient star screen with material conditioner and two screening decks for screening three fractions. Screening decks upper (coarse) lower (fine) 22,000 kg (48,502 lb) DEUTZ TCD 3.6 L4 90 kw (122 hp) at 2,000 rpm length 5,500 mm (18' 1'') width 1,250 mm (4' 1'') length 4,800 mm (15' 9'') width 1,200 mm (3' 7'') 12,000 / 2,550 / 4,000 mm (39' 4''/ 8' 4''/ 13' 1'') The rotation in the same direction of all the star elements loosens, recirculates and transports the material. By means of different shaft speeds the material is torn apart. The grain size of the fines can be determined by different star sizes and different speeds. On the lower level, the fine screening deck, the material is screened once again, separated into the medium and fine fraction and then discharged by two side conveyors. With its more than 13 m 2 (140 sq ft) screening surface, the Doppstadt SM 1200 Triflex achieves very high throughput capacities. The throughput capacity is not even reduced in case of wet materials. The separated materials are highly pure. Optional equipment extend the range of appli cations: windsifter, star screen above the hopper, stonegrid, magnetic separator. SM 1200 SA Triflex Powerful and efficient star screen with material conditioner and two screening decks for screening three fractions. Screening upper (coarse) decks lower (fine) 27,000 kg (59,525 lb) DEUTZ TCD 3.6 L4 90 kw (122 hp) at 2,000 rpm length 5,500 mm (18' 1'') width 1,250 mm (4' 1'') length 4,800 mm (15' 9'') width 1,200 mm (3' 7'') 9,650 (10,790) / 2,550 / 3,900 mm (31'7'' (35' 5'') /8' 4'' /12' 8'') 1200 TRIFLEX L/W/H: 12,000 / 2,550 / 4,000 (39' 4"/ 8' 4"/ 13' 1") SM 1200 SA Triflex 1200 SA TRIFLEX L/W/H: 10,790 / 2,550 / 3,900 (35' 4"/ 8' 4"/ 12' 8") SM 1200 / SM 1200 SA Triflex Weight max. 22,000 kg (48,502 lb) / SA: 27,000 kg (59,525 lb) Chassis central-axle trailer chassis with 3 axles/ SA: 3-axle-semitrailer chassis, for 80 km/h (50 mph) with ABS Type DEUTZ TCD 3.6 L4 Power 90 kw (122 hp) at 2,000 rpm Torque 480 Nm at 1,600 rpm Exhaust level EUROMOT III B / Tier 4i Fuel tank 300 l (79 gal) Drum star screens 3 screening fractions: upper screening deck L 5,500 mm (18' 1"), W 1,250 mm (4' 1") lower screening deck L 4,800 mm (15' 9"), W 1,200 mm (3' 7") 4th fraction e. g. by means of a stonegrid / vibrating screen 5th fraction e. g. by means of a windsifter (star screen deck) Feeding hopper Feeding volume 5.0 m 3 (177 ft 3 ) Feeding width/height 3,780 / 2,830 mm (12' 5"/ 9' 3") Discharge conveyors rear side side Length [*option] coarse medium fine 2,300 mm(7' 7") 4,750 mm(15' 7") 5,000 mm(16' 5") Width 1,200 mm(3' 11") 1,000 mm(3' 3") 800 mm(2' 7") Belt speed m/s (ft in/s) 1.4 (4' 7") 2.8 (9' 2") 2.8 (9' 2") Options e.g. stonegrid, vibrating screen or hopper star screen, additional hydraulic connections, magnetic pulleys at the side and rear conveyor As of October 2014 subject to technical alterations. All are in mm (ft/in). The specifications are approximate. 34 Illustrations and descriptions may include options that are not part of the standard equipment. 35

19 Options For screens Hopper star screen Stonegrid Windsifter (Rear Conveyor) The hopper star screen can be mounted on the hopper of the screen. It is driven by an additional hydraulic connection at the machine. The hopper star screen separates oversize > 200 mm before the actual screening of the shredded material (e.g. shredded waste wood, trunks and roots). It enables the separation of the fines and the oversize in just one path. Available for SM 518 (only with large feeding hopper) SM 620 SM 620 K The stonegrid is used for separating bulky contaminants > 200 mm (e.g. big rocks) and prevents damage, e.g. of the. The stonegrid is tilted hydraulically via remote control. The material is tipped at the left side of the machine. Available for SM 414 SM 414 K SM 518 SM 620 K SM 720 SM 1200 SM 720 SM 1200 Available for SM 1200 SA SM 620 SM 1200 SA SM 518 SM 620 E HYBRID SM 620 The windsifter is used to separate light materials from the oversize fraction. Materials such as foils, plastics, etc. can be sorted out, so that the cleaned oversize is of further use (e.g. biomass, compost, etc.). The windsifter is mounted on the rear conveyor. The contaminants are blown into a container. It is driven by an additional hydraulic connection at the machine. SM 620 K SM 720 Vibrating grid The vibrating grid is used for separating bulky contaminants > 200 mm (e.g. big rocks) and prevents damage, e.g. of the. The vibration automatically moves the material which is then tipped at the side of the machine. The vibration also loosens cohesive materials and leads to a better screening result. It is driven by an additional hydraulic connection at the machine. Star Screen Module The star screen deck is a compact module which can be used instead of the. Due to different speeds of the shafts the material is loosened up and pulled apart. Different grain sizes can be reached by using different star screen decks. Windsifter on Star screen Deck The windsifter is used to separate light materials from the oversize fraction. Materials such as foils, plastics, etc. can be sorted out, so that the cleaned oversize is of further use (e.g. biomass, compost, etc.). The contaminants are blown into a container. It is driven by an additional hydraulic connection at the machine. Available for SM 518 SM 620 SM 620 K SM 720 SM 1200 SM 1200 SA Available for SM 620 SM 620 E HYBRID SM 620 K Available for SM 620 SM 620 K SM 1200 SM 1200 SA 36 37

20 DH SERIES Precision Chipper Production of wood chips Whenever the efficient production of high-quality Reliable components manufacturerd by wood chips is required, Doppstadt precision chippers of the DH series are always the first choice. controls and safety systems on the major suppliers of hydraulic systems, A full-steel chipping rotates mounted in basis of a thought-out construction robust steel frames. The special arrangement of guarantee very quick maintenance the chipping knives guarantees a low-vibration and short downtimes during operation. with all kinds of wood and an optimum structure of the chips. The great number of options for operation, adjustment and equipment permits The whole unit is driven by a ful Mercedes- Benz engine with high efficiency. The capacity is to meet any demand on the final product designed to cope with the demands of continuous and the economic efficiency. service. 3 1 Swing-out cooler with reversible fan wheel 2 Discharge arm 3 Chipping and knives 4 Feed-in roller and chain floor 5 Discharge housing 4 Main Advantages chipping of logs up to 900 mm (2' 11'') in the size of the final product can be regulated by choosing different feeding speeds or changing the screening segments solid full-steel construction of the rotor and chipping knives maintenance and adjustment from outside the machine integrated discharge rotor with hydraulically foldable and adjustable discharge arm or material discharge by swiveling rear conveyor possibility of combination with other Doppstadt products one-man-operation (remote control of all main functions) 6 Maintenance Wood chip production with chippers of the DH series for various users and the processing industry In-feed extension 8 Slip-on coupling 5 8 Explanations and illustrations by the example of the DH 910 *option

21 DH Series CHIP PRODUCTION IN CONTINUOUS OPERATION DH 811 DH 811 L DH 910 K DH 910 SA Compact and very flexible precision chipper for processing log s up to 600 mm (2'). Thanks to the superstructure revolving by 300 it is very flexible for feeding and discharge. Easy transport due to the versatile double-axle trailer chassis. Compact and very flexible precision chipper for processing log Diameters up to 600 mm (2 ). Thanks to the revolving superstructure it is very flexible for feeding and discharge. Truck-mounted operation and transport. The DH 910 K is equal to the DH 910, but it is mounted on tracks for self-propelled drive on difficult terrain. The DH 910 SA is equal to the DH 910, but it is mounted on a tri-axial semitrailer chassis. Its longer in-feed unit permits even very long pieces to be chipped. 19,000 kg (41,888 lb) Total weight approx. 16,000 kg (35,274 lb) Total weight approx. 30,000 kg (66,139 lb) 30,000 kg (66,139 lb) MTU 6R1300* 390 kw (530 hp) bei 2,000 rpm MTU 6R1300* 390 kw (530 hp) at 2,000 rpm Mercedes-Benz OM 502 LA 450 kw (612 hp) at 2,000 rpm Mercedes-Benz OM 502 LA 450 kw (612 hp) at 2,000 rpm Chipping width chipp. knives 1,000 mm (3' 3") 1,000 mm (3' 3'') 5 pcs., arr. around the perimeter Chipping width chipp. knives 1,000 mm (3' 3") 1,000 mm (3' 3") 5 pcs., arr. around the perimeter Chipping width chipp. knives 1,000 mm (3' 3") 1,300 mm (4' 3") 5 pcs., arr. around the perimeter Chipping width chipp. knives 1,000 mm (3' 3'') 1,300 mm (4' 3'') 5 pcs., arr. around the perimeter 8,250 / 2,550 / 3,680 mm (27' 1''/ 8' 4''/ 12' 1'') 6,290 / 2,500 / 2,685 mm (20' 8"/ 8' 2"/ 8' 10") 8,680 / 3,000 / 3,400 mm (28' 6"/ 9' 10"/ 11' 2") 11,000 / 2,500 / 4,000 mm (36' 1"/ 8' 2"/ 13' 1") DH 812 DH 910 DH 910 SA-B Very compact and flexible flexible precision chipper driven by PTO for processing log. Diameters up to 600 mm (2'). Easy transport with central-axle trailer chassis with 2 axles. Powerful chipper for forestry residues and log timber with up to 900 mm (2' 11"). The high motor and the load-sensing material in-feed guarantee an efficient and economic wood chip production. The DH 910 SA is equal to the DH 910 SA. The material discharge is carried out by a rear conveyor (swiveling up 90 ). 19,000 kg (41,888 lb) 25,000 kg (55,116 lb) 30,000 kg (66,139 lb) Chipping required speed chipp. knives with PTO from 250 kw (340 hp) to max. 370 kw (500 hp) 640 rpm (depending on engine speed) 1,000 mm (3' 3") 6 pcs., arr. around the perimeter 6,360 / 2,550 / 3,750 mm (20' 10"/ 8' 4"/ 12' 4") Chipping width chipp. knives Mercedes-Benz OM 502 LA 450 kw (612 hp) at 2,000 rpm 1,000 mm (3' 3") 1,300 mm (4' 3") 5 pcs., arr. around the perimeter 10,220 / 2,500 / 4,000 mm (33' 6"/ 8' 2"/ 13' 1") Chipping width chipp. knives Mercedes-Benz OM 502 LA 450 kw (612 hp) at 2,000 rpm 1,000 mm (3' 3'') 1,300 mm (4' 3'') 5 pcs., arr. around the perimeter 12,360 / 2,500 / 4,000 mm (40' 7"/ 8' 2"/ 13' 1") * MTU engines are based on proven Mercedes-Benz engine technology 40 41

22 DH Series Technical Data DH 811 DH 811 L DH 910 DH 910 K 3,680 12' 1" 2,630 8' 8" 5,930 19' 5" 4,936 16' 2" 2,685 8' 10" 8,250 27' 1" 2,550 8' 4" 6,290 20' 8" 7,307 23' 12" 2,500 8' 2" L/W/H: 8,250 / 2,550 / 3,680 (27' 1"/ 8' 4"/ 12' 1") L/W/H: 6,290/ 2,500 / 2,685 (20' 8"/ 8' 2"/ 8' 10") L/W/H: 10,220 / 2,500 / 4,000 (33' 6"/ 8' 2"/ 13' 1") L/W/H: 8,680 / 3,000 / 3,400 (28' 6"/ 9' 10"/ 11' 2") DH 812 DH 910 SA DH 910 SA-B 3,750 12' 4" 6,360 20' 10" 2,550 8' 4 " L/W/H: 6,360 / 2,550 / 3,750 (20' 10"/ 8' 4"/ 12' 4") L/W/H: 11,000 / 2,500 / 4,000 (36' 1"/ 8' 2"/ 13' 1") L/W/H: 12,360 / 2,500 / 4,000 (40' 7"/ 8' 2"/ 13' 1") Model dh 811 dh 811 l dh 812 dh 910 dh 910 K dh 910 SA dh 910 SA-B Weight max. 19,000 kg (41,888 lb) approx. 16,000 kg (35,274 lb) max. 19,000 kg (41,888 lb) max. 25,000 kg (55,116 lb) approx. 30,000 kg (66,139 lb) max. 30,000 kg (66,139 lb) max. 30,000 kg (66,139 lb) Chassis central-axle trailer chassis with 2 axles for 80 km/h Truck-mounted operation and transport central-axle trailer chassis with 2 axles for 50 km/h (31 mph) central-axle trailer chassis with 3 axles for 80 km/h (50 mph), track drive with two speeds 3-axle semitrailer chassis for 80 km/h (50 mph), with ABS 3-axle semitrailer chassis for 80 km/h (50 mph), with ABS (50 mph), with ABS or 80 km/h (50 mph), with ABS with ABS with PTO Type MTU 6R1300* MTU 6R1300* Mercedes-Benz OM 502 LA Mercedes-Benz OM 502 LA Mercedes-Benz OM 502 LA Mercedes-Benz OM 502 LA Power 390 kw (530 hp) at 2,000 rpm 390 kw (530 hp) at 2,000 rpm from 250 kw (340 hp) to max. 370 kw (500 hp) 450 kw (612 hp) at 2,000 rpm 450 kw (612 hp) at 2,000 rpm 450 kw (612 hp) at 2,000 rpm 450 kw (612 hp) at 2,000 rpm Torque max. 2,200 Nm at 1,300 rpm max. 2,200 Nm at 1,300 rpm max. 2,700 Nm at 1,300 rpm max. 2,700 Nm at 1,300 rpm max. 2,700 Nm at 1,300 rpm max. 2,700 Nm at 1,300 rpm Exhaust standard EUROMOT IV EUROMOT IV EUROMOT III A EUROMOT III A EUROMOT III A EUROMOT III A Tank capacity 750 l (198 gal) 750 l (198 gal) 900 l (238 gal) 900 l (238 gal) 900 l (238 gal) 900 l (238 gal) Chipping Width 1,000 mm (3' 3") 1,000 mm (3' 3") 1,200 mm 1,000 mm (3' 3") 1,000 mm (3' 3") 1,000 mm (3' 3") 1,000 mm (3' 3") Diameter 1,000 mm (3' 3") 1,000 mm (3' 3") 1,000 mm 1,300 mm (4' 3") 1,300 mm (4' 3") 1,300 mm (4' 3") 1,300 mm (4' 3") Chipping knives 5 pcs., arranged around the perimeter 5 pcs., arranged around the perimeter 6 pcs., arranged around the perimeter 5 pcs., arranged around the perimeter 5 pcs., arranged around the perimeter 5 pcs., arranged around the perimeter 5 pcs., arranged around the perimeter Speed 610 rpm (depending on engine speed) 610 rpm (depending on engine speed) 640 rpm (depending on engine speed) 525 rpm (depending on engine speed) 525 rpm (depending on engine speed) 525 rpm (depending on engine speed) 525 rpm (depending on engine speed) Maximum log Hard wood 480 mm (1' 7") 480 mm (1' 7") 480 mm (1' 7") 680 mm (2' 3") 680 mm (2' 3") 680 mm (2' 3") 700 mm (2' 4") Soft wood 600 mm (2') 600 mm (2') 600 mm (2') 900 mm (2' 11") 900 mm (2' 11") 900 mm (2' 11") 900 mm (2' 11") Options remote control, damping facility, discharge arm lighting remote control, damping facility, discharge arm lighting remote control, damping facility, discharge arm lighting remote control, damping facility, discharge arm lighting remote control, damping facility, discharge arm lighting remote control, damping facility, discharge arm lighting damping facility, heatable tail pulley at apron feeder As of October 2014 subject to technical alterations. All are in mm (ft/in). The specifications are approximate. Illustrations and descriptions may include options that are not part of the standard equipment. * MTU engines are based on proven Mercedes-Benz engine technology 42 43

23 BioPress DBP 205 Screw Extruder Versatile and flexible The BIOPRESS DBP 205 screw extruder separates the liquid and the solid fractions of bio-degradable wastes. The screw is driven by a hydromotor with planetary gear. The rotating cone presses the material with a pre-set pressure through the screening baskets, which are available with different mesh sizes. The liquid fractions can be used for biogas pro- duction and the solid fractions for thermal utilization or for composting. A 500 mm (1' 8") screw and rpm (adjustable) ensure a high throughput. Input materials, e. g. mixed biowaste can be pressed trough the screening baskets with different mesh sizes and are then discharged. Applications: food and supermarket wastes, biomass, rejects from the paper industry Mixing Hopper 2 Screen Basket 3 Pressing cone / Hydro motor 4 PRESSING SCREW 5 MATERIAL TRANSFER 6 Material Discharge 7 Outlet Technical data BIOPRESS DBP 205 L/W/H: 8,890 / 2,550 / 3,850 mm (29' 2''/8' 4''/12' 8'') Modell biopress DBP 205 Main Advantages 24,000 kg (52,911 lb) Chassis 2-axle semitrailer chassis for 80 km/h (50 mph) Motor type Mercedes-Benz OM904 LA Power 90 kw (122 hp) an 1,600 rpm Exhaust level EuroMot III a Fuel tank 300 l (79 gal) Measurements L/W/H 10,750 / 2,550 / 4,000 mm (39' 4''/ 8' 4''/ 13 '1'') Screw Extruder Motor type hydromotor with planetary gear Screw mixing screw with replaceable wear segments Screw 500 mm (1' 8'') Press cone hydraulically adjustable gap, pressure-dependent control Screen basket 10 mm round holes Measurements L/W/H 4,470 / 1,400 / 1,520 mm (14' 8''/ 4' 7''/ 5') Rear conveyor L/W 4,200 / 1,200 mm (13' 9''/ 3' 11'') Mixing hopper, Volume 5 m 3 (176.6 ft 2 ) Mixing shafts 2 pcs., : 480 mm (1' 7'') for mixing and conveying 5 As of October 2014 subject to technical alterations. All are in mm (ft/in). The specifications are approximate. Illustrations and descriptions may include options that are not part of the standard equipment Composting and processing of refused derived fuel and Fermentation possible steps for processing bio wastes for fermentation 6 *option maximum throughput and optimal dehydration of the materials to be pressed thanks to variable mesh sizes of the screening tunnel easy to change screening baskets with different perforations to meet various demands easy to change wear elements on the extruder constant discharge of solid fraction thanks to peripheral pressing gap hydraulically adjustable cone with pressure- dependent control high wear resistance up to 70% dehydration for organic wastes driven by low-maintenance hydro-motor load-sensing speed control for hydraulic drive (optimal torque)

24 DU SERIES Windrow Turner versatile applicable Individual use The Doppstadt windrow turners of the DU series are independent of the windrow shape for windrows of different sizes and heights. The high throughput, short setup times and flexible use on site are the main advantages. The DU is attached to the tractor unit by threepoint linkage. By using different tool shapes the turners can be adapted to various requirements. Individual, exact building of the windrow thanks to the variable discharge by hydraulically driven discharge *: Phase 1: Deflection downwards, basic substruction variable rolling direction of Two side milling cutter discs are equipped with wear-resistant tools, which can easily be replaced. Phase 2: Standard lateral windrow building Phase 3: Deflection upwards, extended windrow building variable Phase 1 Composting, processing of different materials Main Advantages high flexibility thanks to compact construction easy transport and quick set up due to hydrauli- Phase 2 cally foldable elements blade-shaped milling tools resistant to wear easy maintenance and replacement on free accessable cutter discs high adaptability thanks to different tool tips discharge roller* for variable windrow heights Phase 3 long grass wedge for stringy material material windrow newly built windrow Optional: Fe-separation, windsifting and further processing * option running direction Explanations and illustrations by the example of the DU

25 DU 265 DU Series Technical Data DU 265 DU 320 DU 265 DU 320 W/H: 2,950 / 3,030 mm (9'8'' / 9'11'') ** with discharge height L/W/H: 2,710 / 3,070 / 3,680 mm (8' 11"/10' 1"/ 12' 1") Model Du 265 DU 320 Weight approx. 4,950 kg (10,913 lb) approx. 5,700 kg ( lb) by PTO shaft of tractor by PTO shaft of tractor shaft kw ( hp) at 1,000 rpm max. 228 kw (310 hp) at 1,000 rpm Mounting 3-point linkage rear 3-point linkage rear Milling cutter disks 2 pieces, 1,150 mm (3' 9") each 2 pieces, 1,160 mm (3' 9") each Speed approx. 260 rpm approx. 220 rpm Tools 6 teeth per milling disc, 3 short or long blades 6 teeth per milling disc, 3 short or long blades Conveyor vulcanized profiled belt, bars, hydraulically foldable vulcanized profiled belt, bars, hydraulically foldable Width 800 mm (2'7'') 1,200 mm (3' 11") Belt speed approx. 6,8 m/s (22.3 ft/s) approx. 6,8 m/s (22.3 ft/s) New windrow height up to approx. 3,200 mm (10' 6'') up to 3,300 mm (10' 10") Options (*) hydraulically driven discharge, long grass wedge As of October 2014 subject to technical alterations. All are in mm (ft/in). The specifications are approximate. Illustrations and descriptions may include options that are not part of the standard equipment. hydraulically driven discharge, long grass wedge, assembling to Fendt Vario 48 49

26 RECYCLING TECHNOLOGY STATIC EQUIPMENT DW Series Shredders SM/SST Series TROMMEL SCREENERS DW 206 CERON DW 256 CERON DW 306 CERON DW 3080 E2 SM 518A SM 518F SM 620A SST 518 SST 720 SST 725 SST 1025 SST 1525 AK/NZ Series GRINDERS AK 235E AK 435E NZ 180 AT Series FEED HOPPERS AT 300 AT 600 DST Star Screen DWS Windsifter DF Fine Shredder DF 307 ROTARO DST 512 DST 513 For Further Information about STATIC EQUIPMENT please contact: DM Mixer DM 215 E DSP SCREW PRESS DSP 20-5 Doppstadt Systemtechnik GmbH Steinbrink 4, Velbert, Germany Phone: +49 (0) / Fax: +49 (0) systemtechnik@doppstadt.de Website: