ANGLE ROLLS PROFILE BENDING MACHINES

Size: px

Start display at page:

Download "ANGLE ROLLS PROFILE BENDING MACHINES"

Edgar Harmon
6 years ago
Views:

1 ANGLE ROLLS PROFILE BENDING MACHINES It s difficult to compete in today s world with yesterday s technology. We have solutions.

respected manufacturer of sheet metal machinery in the world.

5 million square foot footprint and over 1500 dedicated employees. JMT s U.S.

equipped with proven quality components to fulfill a customer s most exacting requirements.

2 JMTUSA.com Toll Free: (855-PRESS-BRAKE) JMT machines are built by the largest volume fabrication machine tool producer and the most respected manufacturer of sheet metal machinery in the world. This factory is one of the world s most contemporary production plants, with a 1.5 million square foot footprint and over 1500 dedicated employees. JMT s U.S. HEADQUARTERS JMT machines are built to extremely stringent standards and the factory has maintained continuous product research and development since With 75 R&D and product engineers on-staff at the plant, JMT products utilize the most modern techniques in design and engineering, and are equipped with proven quality components to fulfill a customer s most exacting requirements. JMT combines accuracy, speed, flexibility, durability, reliability and advanced technology with the highest performance/price ratio in the world. A nationwide network of JMT distributors and technical support personnel are in place to assist you. Our machines are built with world-renown components such as Rexroth, Siemens and Schneider, which are available off the shelf from your local supplier, your dealer, or direct from JMT. For more information please visit JMTUSA.com. You can also us at JMT@JMTUSA.com or call toll free to (855-PRESS-BRAKE). MACHINE PARTS INVENTORY PLANTS BUILDING OUR JMT MACHINES

Precision bearings and large shaft diameters minimize deflection for precise bending.

Short cycle times are achieved by high torque drive system and machine speed.

3 JMT Angle Rolls Profile Bending Machines Robust machine frame is constructed of rugged steel, machined after welding for rigidity. All welds are stress relieved prior to machining. Precision bearings and large shaft diameters minimize deflection for precise bending. Machines are ensured a long life due to their strong frame and world-class hydraulic and electrical components. Short cycle times are achieved by high torque drive system and machine speed. Straight edge is minimized by close roll stance, powerful guide rolls and hydraulic adjustments. Flat spots are minimized due to closer roll stance. Low energy and maintenance costs by friction-free planetary swing guides. JMT PBM Series Motorized Profile Bending Machines JMT PBH Series Hydraulic Profile Bending Machines

.. 37" L x 29" W x 56" H Weight... 957 lbs.

4 JMT PBM MOTORIZED ANGLE ROLLS JMT PBM 30 PBM 50 PBM 30 Mechanical Profile Rolls Shaft Diameters " Roll Diameters... 5" Motor Power HP Turning Speed FPM Dimensions... 32" L x 28" W x 47" H Weight lbs. PBM 50 Mechanical Profile Rolls Shaft Diameters " Roll Diameters " Motor Power... 2 HP Turning Speed FPM Dimensions... 37" L x 29" W x 56" H Weight lbs. STANDARD SPECIFICATIONS: Standard universal rolls Hardened rolls Mechanical lateral guide rolls Horizontal and vertical operation Foot pedal with safety device OPTIONS: Special rolls for tubes, profiles, cap rail, etc. Special support rolls for angles Special bar twist device Digital read out Wired or wireless remote Infinite variable speed Double speed motor (6-12 FPM) for the PBM 30 JMT PBH HYDRAULIC ANGLE ROLLS JMT PBH 45 Shaft Diameters " Roll Diameters " Motor Power HP Turning Speed FPM Dimensions... 39"L x 28"W x 54"H Weight... 1,320 lbs. STANDARD SPECIFICATIONS: Three roll driven Steel construction Standard universal rolls Hardened rolls Mechanical lateral guide rolls Programmable digital read out Horizontal and vertical operation Portable control panel OPTIONS: Special rolls for tubes, profiles, cap rail, etc. Special support rolls for angle iron leg/in Wired or wireless remote

JMT PBM & PBH ANGLE ROLL TECHNICAL DIMENSIONS PBM 30 PBM 50 PBH 45 1 Solid - Square 2 Flat-Along Edge Dimensions 1 3 / 8 " x 1 3 / 8 " 49" 3/4" 16" 2½" x 3/8" 32" 2" x 1/2" 32" Dia.

x 1/4" 30" x 6 T Section Leg-Down 1½" x 1½" x 1/4" 25" 2 3 / 8 " x 2 3 / 8 " x 1/4" 30" 2" x 2" x 1/4" 24" 7 T Section Leg-Out 2" x 2" x 1/4" 24" 2" x 2" x 3/16" 28" 2" x 2" x 1/4" 24" 8 T Section

5 JMT PBM & PBH ANGLE ROLL TECHNICAL DIMENSIONS PBM 30 PBM 50 PBH 45 1 Solid - Square 2 Flat-Along Edge Dimensions 1 3 / 8 " x 1 3 / 8 " 49" 3/4" 16" 2½" x 3/8" 32" 2" x 1/2" 32" Dia. 3 Solid - Rectangle 3" x 3/8" 14" 3" x 3/4" 30" 2" x 3/4" 18" 4 Angle Leg-Out 1½" x 1½" 3/16" 16" 2" x 2" x 3/16" 38" 2" x 2" x 1/4" 25" 5 Angle Leg-In 1½" x 1½" 3/16" 16" 2" x 2" x 3/16" 40" 2" x 2" x 1/4" 30" x 6 T Section Leg-Down 1½" x 1½" x 1/4" 25" 2 3 / 8 " x 2 3 / 8 " x 1/4" 30" 2" x 2" x 1/4" 24" 7 T Section Leg-Out 2" x 2" x 1/4" 24" 2" x 2" x 3/16" 28" 2" x 2" x 1/4" 24" 8 T Section Leg-In 2" x 2" x 1/4" 36" 2" x 2" x 3/16" 38" 2" x 2" x 1/4" 24" 9 Tubing - Square 1½" x 1½" x 0.120" 2" x 2" x 0.120" 1¾" x 1¾" x 10 Ga. 10 Tubing - Rectangle 2" x 1" x 0.120" 2" x 1½" x 0.120" 2" x 1 3 / 16 " x 12 Ga. 11 Solid - Round Ø1 1 / 8 " 24" Ø1 3 / 8 " 32" 1 3 / 8 " 20" 12 Schedule 40 Pipe 13 Tubing - Round Profile Type 1¼" x 1¼" 26" 2" x 3/8" 20" 1" SCH 40 18" 1" SCH 40 13" 1½" 20" 1½" SCH 40 36" 1½" SCH 40 26" 2" 40" 2" SCH 40 48" 1 3 / 8 " x 1 3 / 8 " 20" 2" x 3/4" 18" Ø3/4" x 0.06" Ø1.18" x 0.079" 19.7" Ø1.18" x 0.079" 17¾" Ø2.36" x 0.06" Ø2¾" x 0.079" 47¼" Ø2.36" x 0.079" 39.4" 14 C Section Leg-Out 2" 20" 2 3 / 8 " x 1 1 / 16 " x 1/4" 24" 2" x 2" x 1/4" 24" 15 C Section Leg-In 2" 32" 2 3 / 8 " x 1 1 / 16 " x 1/4" 32" 2" x 2" x 1/4" 29" Capacity based on mild steel Can be changed according to deformation Standard Rolls Special Rolls Special Tools X Special Support Rolls Notes

JMT PBH HYDRAULIC ANGLE ROLLS JMT PBH 60 PBH 80 PBH 100 PBH 125 PBH 60 Shaft Diameters: Top...2.364" Planetary (2)...2.364" Roll Diameters...7" Motor Power...3 + 2 HP Turning Speed...17 FPM Dimensions.

..62" L x 47" W x 56" H Weight...5,170 lbs.

All three rolls (shafts) are hydraulic motor driven through planetary gear box Three-axis hardened side supports (lateral guide rolls): PBH 60/80: Mechanical forward-backward (Thrust ), up-down

6 JMT PBH HYDRAULIC ANGLE ROLLS JMT PBH 60 PBH 80 PBH 100 PBH 125 PBH 60 Shaft Diameters: Top " Planetary (2) " Roll Diameters...7" Motor Power HP Turning Speed...17 FPM Dimensions...46" L x 39" W x 46" H Weight...2,627 lbs. PBH 80 Shaft Diameters: Top " Planetary (2) " Roll Diameters...9.7" Motor Power...10 HP Turning Speed...23 FPM Dimensions...62" L x 47" W x 56" H Weight...5,170 lbs. STANDARD SPECIFICATIONS: 1 set of standard universal hardened and ground rolls (special steel) Drive systems: PBH 60: All three rolls (shafts) are driven through precision gear box PBH 80/100/125: All three rolls (shafts) are hydraulic motor driven through planetary gear box Three-axis hardened side supports (lateral guide rolls): PBH 60/80: Mechanical forward-backward (Thrust ), up-down (Translation ) and right-left (Radial ) movement PBH 100: Hydraulic forward-backward movement (Thrust ) and mechanical up-down (Translation ) and right-left (Radial ) movement PBH 125: Hydraulic control of lateral guide rolls in three axes (Thrust / Translation / Radial ) Side supports will accommodate leg-in/leg-out angle iron bending Portable control panel with programmable DROs Vertical or horizontal operation Body constructed of stress-relieved steel Bottom roll shafts hydraulically adjusted World standard electrical/hydraulic components (parts stocked by JMT or available off-the-shelf from your local supplier) OPTIONS: Special rolls for pipe, profiles, bar/angles, etc. Rolls and tooling for hardway beam/channel bending Digital readout for side supports NC control system with or without axis CNC control system Wired or wireless remote Adjustable turning speed Spiral bending apparatus Tie Bar for rolls on PBH 60/80 Hydraulic side supports (per axis) for PBH 60/80 Hydraulic control of lateral guide rolls in additional 2 axes (Translation / Radial ) for PBH 100 Special apparatus to prevent deformation on U-I-H bending for PBH 100/125 PBH 100 Shaft Diameters: Top " Planetary (2) " Roll Diameters " Motor Power...15 HP Turning Speed...26 FPM Dimensions...69" L x 53" W x 65" H Weight...7,392 lbs. PBH 125 Shaft Diameters: Top...5.5" Planetary (2)...4.7" Roll Diameters...15" Motor Power...20 HP Turning Speed...29 FPM Dimensions...73" L x 61" W x 66" H Weight...10,120 lbs.

Angle Leg-In 2½" x 3/16" 28" 3" x 3/8" 37" 4" x 1/2" 42" 5" x 1/2" 48" 6 T Section Leg-Down 2½" x 3/16" 36" 3" x 3/8" 40" 4" x 1/2" 65" 5" x 1/2" 60" 7 T Section Leg-Out 2½" x 2½" x 1/4" 24" 3" x 3"

7 JMT PBH ANGLE ROLL TECHNICAL DIMENSIONS PBH 60 PBH 80 PBH 100 PBH 125 Profile Type Dimensions 1 Solid - Square 1½" x 1½" 20" 2" x 2" 24" 2¼" x 2¼" 24" 3" x 3" 36" 2 Flat-Along Edge 2¾" x 3/8" 24" 3 1 / 8 " x 3/4" 32" 4" x 1" 32" 5" x 1" 40" 3 Solid - Rectangle 3½" x 1" 20" 5" x 1" 26" 7" x 1 3 / 8 " 26" 10" x 1¼" 52" 4 Angle Leg-Out 2½" x 3/16" 32" 3" x 3/8" 37" 4" x 1/2" 42" 5" x 1/2" 42" 5 Angle Leg-In 2½" x 3/16" 28" 3" x 3/8" 37" 4" x 1/2" 42" 5" x 1/2" 48" 6 T Section Leg-Down 2½" x 3/16" 36" 3" x 3/8" 40" 4" x 1/2" 65" 5" x 1/2" 60" 7 T Section Leg-Out 2½" x 2½" x 1/4" 24" 3" x 3" x 3/8" 36" 4" x 4" x 1/2" 45" 5" x 5" x 1/2" 48" 8 T Section Leg-In 2½" x 2½" x 1/4" 32" 3" x 3" x 3/8" 44" 4" x 4" x 3/8" 52" 4" x 4½" 52" 9 Tubing - Square 2" x 2" x 0.120" 2¾" x 2¾" x 5/32" 3" x 3" x 1/4" 4" x 4" x ¼" 10 Tubing - Rectangle 2½" x 1½" x 1/8" 3" x 1½" x 5/32" 4" x 2¼" x 5/32" 5½" x 2" x 3 / 16 " 11 Solid - Round Ø1½" 20" Ø2" 24" Ø2¾" 32" Ø3¼" 42" 12 Schedule 40 Pipe 2" SCH 40 24" 3" SCH 40 40" 4" SCH 40 48" 5" SCH 40 68" 13 Tubing - Round Ø2.36" x 0.080" 23½" Ø4" x 0.099" 51" Ø4¾" x 0.099" 55" Ø5½" x 0.129" 59" 14 C Section Leg-Out C5 x 9# 28" C6 x 13# 28" C7 x 14# 40" C8 x 22# 48" 15 C Section Leg-In C5 x 9# 32" C6 x 13# 36" C7 x 14# 40" C8 x 22# 48" 16 I Section Leg-In/Out 2¼" 28" S6 x 17# 28" S7 x " W8 x 21# 44" 17 I Section Leg-In/Out W4 x 13# 55" W6 x 16# 36" W6 x 20# 44" 18 C Section Leg-Up Note: Machine will roll 3" x 3" x 1/4" angle with larger rolls to a 3" x 1¾" 158" W3 24" W5 x 19# 36" 19 I Section Leg-Up/Down greater dimension. C5 x 6# 210" C5 x 9# 320" Section Modules In In In 3 Capacity based on mild steel Can be changed according to deformation Standard Rolls Special Rolls Special Tools X Special Support Rolls Dia. Notes

JMT PBH HYDRAULIC ANGLE ROLLS JMT PBH 180 PBH 240 PBH 300 PBH 360 STANDARD SPECIFICATIONS: 1 set of standard universal hardened and ground rolls (special steel) All rolls

axes total): Thrust Translation Radial Portable control panel with programmable DROs Horizontal operation Body constructed of stress-relieved steel Hydraulic/electrical

local supplier) OPTIONS: Special rolls for pipe and profiles Rolls and tooling for hardway beam/channel bending Digital readout for side supports NC control system with or

8 JMT PBH HYDRAULIC ANGLE ROLLS JMT PBH 180 PBH 240 PBH 300 PBH 360 STANDARD SPECIFICATIONS: 1 set of standard universal hardened and ground rolls (special steel) All rolls have separate planetary gear boxes and are hydraulic motor driven with automatic peripheral speed adjustment Hydraulic control of lateral guide rolls in three axes (six axes total): Thrust Translation Radial Portable control panel with programmable DROs Horizontal operation Body constructed of stress-relieved steel Hydraulic/electrical overload protection Bottom roll shafts hydraulically adjusted World standard electrical/hydraulic components (parts stocked by JMT or are available off-the-shelf from your local supplier) OPTIONS: Special rolls for pipe and profiles Rolls and tooling for hardway beam/channel bending Digital readout for side supports NC control system with or without axis CNC control system Wired or wireless remote Adjustable turning speed Anti-deformation apparatus for U-I-H bending Spiral bending apparatus Custom machines available

9 JMT PBH ANGLE ROLL TECHNICAL DIMENSIONS PBH 180 PBH 240 PBH 300 PBH 360 Profile Type Dimensions 1 Solid - Square 3½" x 3½" 45" 4 3 / 8 " x 4 3 / 8 " 62" 6" x 6" 85" 10" x 10" 104" 2 Flat-Along Edge 6" x 1" 39" 7" x 1½" 47" 10" x 2½" 80" 12" x 3½" 80" 3 Solid - Rectangle 10" x 2" 40" 14" x 2" 38" 20" x 3" 80" 25" x 4" 80" 4 T Section Leg-Down 6" x 5/8" 58" 6" x ¾" 87" 8" x 1" 72" 8" x 1" 52" 5 T Section Leg-Out 6" x 5/8" 56" 6" x ¾" 94" 8" x 1" 72" 8" x 1" 52" 6 T Section Leg-In 6" x 5/8" 67" 6" x ¾" 115" 8" x 1" 105" 8" x 1" 60" 7 Angle Leg-Out 6" x 6" x 5/8" 85" 6" x 6" x ¾" (1) 63"/105" 8" x 8" x 1 1 / 8 " 90" 8" x 8" x 1¼" 64" 8 Angle Leg-In 5" x 5" x ¾" 85" 6" x 6" x ¾" (1) 70"/135" 8" x 8" x 1" 110" 8" x 8" x 1¼" 70" 9 Tubing - Square 5" x 5" x 5/16" 6" x 6" x 3/8" 8" x ½" 16" x 16" x 5/8" 10 Tubing - Rectangle 7" x 2¾" x 5/16" 8" x 3" x 5/16" 10" x 10" x 3/8" 18" x 8" x 3/8" 11 Solid - Round 4" 39" 5" 50" 7" 85" 10½" 80" 12 Schedule 40 Pipe 6" SCH 40 70" 8" SCH " 12" SCH " 20" SCH " 13 C Section Leg-Out C12 x 30# 48" C15 x 50# 58" MC18 x 58# 44" MC18 x 58# 62" 14 C Section Leg-In C12 x 30# 52" C15 x 50# 64" MC18 x 58# 44" MC18 x 58# 62" 15 I Section Leg-In/Out W12 x 35# 46" W14 x 38# 62" W21 x 93# 86" W36 x 210# 198" 16 I Section Leg-In/Out W8 x 31# 45" W12 x 50# 62" W12 x 65# 82" W31 x 241# 198" 17 I Section Leg-In/Out W6 x 25# 30" W10 x 45# 62" W4 36" W30 x 211# 145" 18 C Section Leg-Up C7 x 12.25# 345" C8 x 18.75# 420" MC12 x 50# 365" MC18 x 58# 690" X 19 I Section Leg-Up/Down W6 x 16# 124" W8 x 21# 205" W12 x 35# 512" W24 x 118# 1810" X 20 I Section Leg-Up/Down W5 x 19# 98" W6 x 25" 152" W10 x 39# 410" W16 x 100# 1290" X 21 I Section Leg-Up/Down W3 42" W4 82" W4 84" W14 x 176# 1100" X Section Modules 6-10 In In In In 3 Shaft Diameters Roll Diameters Motor Power Turning Speed Dimensions Weight Ø 6.3", 6.3", 7.1" Ø 18" 25 HP 0-23 Feet/ 95" L x 79" W x 63" H 22,000 Lbs. Ø 8.7", 8.7", 9.5" Ø 22" 40 HP 0-23 Feet/ 91" L x 78" W x 126" H 35,200 Lbs. Ø 11", 11", 11.8" Ø 29" 85 HP 0-23 Feet/ 126" L x 165" W x 100" H 52,800 Lbs. 95 HP 104,000 Lbs. Dia. Ø 14.2", 14.2", 14.2" Ø 32" 0-23 Feet/ 225" L x 200" W x 130" H Capacity based on mild steel Can be changed according to deformation Standard Rolls Special Rolls Special Tools X Special Support Rolls Notes

10 JMT PBH 360

11 for Models: PBH 60 PBH 80 PBH 100 PBH 125 PBH 180 PBH 240 PBH 300 PBH 360 JMT Standard Universal Rolls / Tooling

12 JMTUSA.com Toll Free: (855-PRESS-BRAKE)

PRESS BRAKES. Flexible Bending Solutions. It s difficult to compete in today s world with yesterday s technology. We have solutions.

PRESS BRAKES. Flexible Bending Solutions. It s difficult to compete in today s world with yesterday s technology. We have solutions. FBS PRESS BRAKES Flexible Bending Solutions It s difficult to compete in today s world with yesterday s technology. We have solutions. JMTUSA.com Email: JMT@JMTUSA.com Toll Free: 855-773-7727 (855-PRESS-BRAKE)