Sheeting 174. Natural 176. Neoprene 178. Nitrile 179 EPDM 181. Silicone 182. Viton 184. Miscellaneous 185

Products. Butyl. Hypalon (CSM, CSE) Pure Gum. EPDM Cloth Inserted (CI) EPDM Peroxide Cure. EPDM White Meets FDA. EPDM NSF 61 Compliant AFLAS

1-800-569-2150 All sheets are manufactured to RMA tolerances and meet basic requirements indicated and are only a general rule and no application guarantees implied. Products Material Delivering high quality

+91-8048602791 Hi- Tech Polymer http://www.vitonorings.com/ We offer high quality Industrial Rubber Parts. Our industrial rubber products are manufactured using advanced technology and sophisticated machinery.

Catalogue. Rubber Sheet. Rubber Floor. Rubber Mat. Skirtboard. General Information General Rubber Information 16. Table of Contents Section Pages

Catalogue Table of Contents Section Pages Rubber Sheet Rubber Floor Rubber Mat Skirtboard Neoprene Sheet 1 Neoprene Cloth-Inserted Sheet 1 Nitrile Sheet 1 FDA White Nitrile Sheet 2 Black Cloth-Inserted

TABLE OF CONTENTS. Remember ROGERS for Rubber & Plastic page 2

TABLE OF CONTENTS BUTYL RUBBER... 4 BUTYL RUBBER SHEETS 60 SDH... 4 BUTYL RUBBER ROLLS 60 SDH... 4 EPDM RUBBER... 5 EPDM RUBBER SHEETS 60 SDH... 5 EPDM RUBBER ROLLS... 5 HYGIENIC WHITE RUBBER... 6 HYGIENIC

CAPABILITY STATEMENT. Rubber Hardware Tapes Sealants Gasket Cutting Tape Slitting.

CAPABILITY STATEMENT Rubber Hardware Tapes Sealants Gasket Cutting Tape Slitting www.indrub.com.au I.R.S. is a major supplier to industries including: Signage Oil & Gas Mining Equestrian 4WD & Campers

Unlined valves with flanged ends

Main Parts and Materials Unlined valves with flanged ends NO. PART MATERIA 1 2 DIAPHRAGM BODY WC_ Cast Iron EN-J1040 (GG25) WD_ RUBBER Ductile Iron EN-JS1030 (GGG40) Natural (D10) / EPDM (D20) / Butyl

Weir Type Diaphragm Valves - DIAVAL SERIES W

when necessary. Valves close by turning the handwheel clockwise. Valves are bolted bonnet, seatless design, with a diaphragm as closure element, with rising handwheel. Valves are offered with a broad range

Fax McDaniel Houston, Texas 77022

Dear Valued Customer: What makes Gulf Rubber a uniquely different rubber supply company? The answer is clear; it is our team of dedicated people. We have over 100 years of experience in the fluid sealing

JIS O-RING SIZES. Sarasota, FL Office: Kennesaw, GA Office:

13 JIS O-RING SIZES 14 BASIC ELASTOMERS Nitrile (or Buna) Trade Names: Chemigum, Paracril Cost estimate: Low Temperature range: -30 to +250 F Nitrile is the most commonly used elastomer in the seal industry.

Krishna Rubber Product

+91-8048719078 Krishna Rubber Product https://www.krishnarubberproduct.org/ We are engaged in manufacturing and supplying a commendable range of quality approved Rubber Products. Offered products are highly

Diaphragm Valves. Product information

Diaphragm Valves Product information ART 510 Diaphragm Valve Weir Type Features Screwed BSP Taper Ductile Iron Body Rising Handwheel Indicator Bonnet Diaphragm Available Grade A - Natural Rubber Grade

FAX: SPECIAL APPLICATION HOSES, METAL & TEFLON HOSES

Large Bore Teflon Fittings Selection Pipe Thread (NPT) Style 03 Flanges Lap Joint Flange Style 12 Shown with epoxy coated steel flange Cam and Groove Female Swivel Type Style 16 Also available Teflon Encapsulated

FEATURES AND PARTICULARS

FIL-PEMTO S.p.A. (GT FLEX Division) Operating office: Via Saronno, 225 21042 Caronno Pertusella (VA) - ITALY Phone: +39-02-96458166 / 02-96457700 Fax: +39-02-73965061 E-Mail: commerciale@gtflex.eu Web:

CAST IRON VALVES PRESSURE REDUCING VALVES SERIES

CAST IRON VALVES PRESSURE REDUCING VALVES SERIES NETAFIM CAST IRON VALVES PRESSURE REDUCING VALVES INLINE 0-600MM ANGLE 0-150MM SPECIFICATIONS Manufactured to ISO 9001 Available Valve sizes INLINE Flanged

Price List. Customer Service Support

LP2019-BNG Effective: Supersedes All Previous Pricing Price List Bolts, Nuts, Gaskets & Accessory Packs (Less Glands) For Other Products See Latest Versions of: ND - Import Utility Fittings, Glands, Accessory

BUTTERFLY VALVE VF-7 Series

BUTTERFLY VALVE VF-7 Series CENTRIC, RUBBER SEATED LEVER GEAR PNEUMATIC - ELECTRIC OPERATED ALLOWABLE PRESSURE DN 40 300mm : 16 bar DN 350 1200mm : 10 bar INVESTMENT CASTING STAINLESS STEEL BODY 2 12 (50mm

+91-8079469087 Apple Rubber Industries www.indiamart.com/applerubberindustries Apple Rubber Industries offer new innovated designed product in India Tooth Polisher, Nails Polisher, Pinholes Spectacles,

DUCTING: U-01 MATERIAL HANDLING ANTI STATIC CUSTOM MADE DUST FUMES

MATERIAL HANDLING CUSTOM MADE ANTI STATIC FUMES DUST 228 230... PVC CLEAR PVC BLUE 231... TPR FRS FLEXAUST HT 232... VOLCANO PU-R VOLCANO PU-M VOLCANO PU-H 233... EOLO PU EOLO PU A/S 234... EOLO TR TUFLEX

Sponge rubber products are manufactured in many different processes either by vulcanization in moulds or by extrusion.

Introduction Sponge rubber profiles from EPDM, CR, NBR, NR in various colours Sponge rubber is a cellular, softly elastic material made of caoutchouc. During vulcanization the material inflates forming

Full Bore Diaphragm Valve, Metal

Full Bore Diaphragm Valve, Metal Construction The GEMÜ motorized 2/2 way full bore diaphragm valve is fitted with a motor/control units made by AUMA. Features Optional rubber lining particularly suitable

STRAIGHT THROUGH (SO-TYPE) DIAPHRAGM VALVE

STRAIGHT THROUGH (SO-TYPE) DIAPHRAGM VALVE 1. MOC: SG42 Cast iron 1. Higher pressure tolerance 2. Straight-through passage 2. 100% SA manufactured 3. Robust construction 3. Easy interchangeability of parts

DESIGN & MFRS OF NON METALLIC AND METALLIC PARTS FOR AEROSPACE APPLICATIONS

DESIGN & MFRS OF NON METALLIC AND METALLIC PARTS FOR AEROSPACE APPLICATIONS INDIGENOUS INNOVATIONS OF ELASTOMERS FOR AEROSPACE AND FLUID POWER SECTOR 17 & 18 TH JUNE 2016 AT SATISH DHAWAN AUDITORIUM IISC

SIGEVAL BUTTERFLY VALVES EXPORTING PRICE LIST Certification ISO Ed UNE-EN-ISO 9001

SIGEVAL BUTTERFLY VALVES 0 0 6 2 Certification ISO-9001 EXPORTING Ed.00-11 BUTTERFLY VALVE TYPE FL(w) Handlever FL(w)-3 FL(w)-5 FL(w)-3 FL(w)-5 FL(w)-3 FL(w)-5 FL(w)-3 FL(w)-5 FL(w)-3 FL(w)-5 Body: Wafer

REPAIR PARTS LIST 31

LIST 31 Part Number Size Description List Price 0109-09-1601 16" Cover - Mild Steel $85.92 0109-03-1601 16" Cover - Aluminum $136.26 0109-07-1601 16" Cover - Stainless Steel 304 $329.09 0109-09-2001 20"

E8 Mini-Matic 3/8" Bolted Plastic Pumps Operating Instructions

E8 Mini-Matic 3/8" Bolted Plastic Pumps Operating Instructions Polypropylene SAFETY WARNINGS Read these instructions completely before installation and start-up. It is the responsibility of the purchaser

PRESSURE REDUCING VALVES

14.01 Part No. 536 536 WRAS APPROVED BRASS BODY WITH BSP THREADED CONNECTIONS SUITABLE FOR WATER & AIR The 536 pressure reducing valve is a economical and reliable solution for water and air applications.

Premium Heavy Duty Conveyor Belt 3ply 600# 3/8 x 1/8 RMA Grade 1 Part Numbers: BCON600/3-6242

Conveyor Belt Premium Heavy Duty Conveyor Belt 3ply 600# 3/8 x 1/8 RMA Grade 1 Part Numbers: BCON600/3-6242 Polyester/Nylon EP350 x 3PLY Total Belt Gauge (inch) 0.713 Belt Weight (lbs/sq. ft.) Approx 4.3

Baumann Series Sanitary Regulators

Bulletin 84000 Series Regulators Baumann 84000 Series Sanitary Regulators Pressure regulation for your sanitary process. The Baumann 84000 series of sanitary regulators are designed specifically for those

SEALING SYSTEMS. ISO & DIN Gaskets

SEALING ISO & DIN Gaskets ISO & DIN Clamp Gaskets SEALING Sanitary Gasket s ISO #2852 And DIN #32676 Sanitary Gasket s ISO #2852 and DIN #32676 hygienic flanged clamp gaskets are manufactured to FDA and

TO BE FUNISHED WITH CONTROL UNITS YES NO MOVEMENT CAPABILITY AND FORCES. Elong. (in) Approx Force (Lbs)

This flexible joint should be installed the length shown on drawing. Piping and equipment connected by this flexible joint must be anchored and guided. If not, control units must be used to prevent movement

The Right Seal for Every Application

The Right Seal for Every Application O-Rings The O-ring s simple & inexpensive design remains a popular and universal choice for sealing static and dynamic hydraulic systems. It seals efficiently in both

Welcome. Applications. Where you find us. Bus and Truck. Medical. Marine. Audio. Automotive. Aerospace. Air Conditioning. Rail

Key: Manufacturing Plants Clients Our performance Sealing Foam Range, offers the best choice possible to ensure problem resolved at a competitive price. Foam Techniques Mfg (I) Pvt Ltd Gut No. 560, Village:

OPERATION MANUAL NT50 NOMAD TRANS-FLO AIR-OPERATED DOUBLE DIAPHRAGM PUMPS. A JDA Global Company. 7/11 rev. 1

OPERATION MANUAL NT50 NOMAD TRANS-FLO AIR-OPERATED DOUBLE DIAPHRAGM PUMPS A JDA Global Company 7/11 rev. 1 CAUTION SAFETY POINTS TEMPERATURE LIMITS: Neoprene -17.8 C to 93.3 C 0 F to 200 F Buna-N -12.2

+91-8045318111 Suheg Rubber Industries Private Limited http://www.customrubberproducts.co.in/ We manufacture, supply and export Rubber Products. Owing to their dimensional accuracy, sturdy & rugged construction,

HANDBOOK OF RUBBER FORMULATIONS

HANDBOOK OF RUBBER FORMULATIONS Contents Chapter 1 Natural Rubber 0001.PCP.RF.Body stoch (Fan belt)2 0002PCP.RF.Body stoch (Fan belt)1 0003.PCP.RF.Body stoch (Fan belt) 0004.PCP.RF.Bajaj spring Buffer

PRODUCT GROUP CODES. Technical Products/Chemicals/Consumables. ARC Products. Flange Insulation Kits. Hydraulic Seals & Parts. Pump seals.

Spiral Wound or Flex Gaskets Graphite Die Formed Packing Rings Valves, Gauges & Misc. 001 GSKT,SPIRAL WR 304/CC 056 PACKING,GRAPH. DIE FORMED 115 PLATE EXCH.SERVICES/PARTS 002 GSKT,SPIRAL WR 316/MISC 057

Think Quality...Think Value...Think SteigenTech

Think Quality...Think Value...Think SteigenTech Rubber & Plastic Technologies Rubber Sheeting & Matting 2015 FRICTION RUBBER BELTS SHEETING & MATTING Products Codifications Page 2 : Industrial Rubber Sheet

Versa-Matic. Operating Manual. 3/8" Bolted Plastic Pumps. Polypropylene Kynar

Versa-Matic Operating Manual 3/8" Bolted Plastic Pumps Polypropylene Kynar E8 SAFETY WARNINGS Read these instructions completely before installation and start-up. It is the responsibility of the purchaser

Conley Product Bulletin

EXTRA HEAVY DUTY CONLEY VALVES Conley Product Bulletin RUGGED TOP OF THE LINE PERFORMANCE ~ AFFORDABLE COST Conley Valve Types Weir style diaphragm valves in sizes from 1 ½ through 6 Swing check valve

Dual Plate Check Valve

Dual Plate Check Valve Belgicast Model C Ruber-Check Dual plate check valve Wafer type 40/1200 PN 10/16/25/40 Features: Dual plate check valve with soft wafer type seat for fitting between flanges. For

Diaphragm : Plastic Metal Globe : Plastic Metal Manifold Pinch Valve

Diaphragm : Plastic...................... 156 Metal...................... 158 Globe : Plastic...................... 160 Metal...................... 164 Manifold..................... 170 Pinch Valve.......................

DIAPHRAGM VALVES b y H a k o h a v V a l v e s

b y H a k o h a v V a l v e s DIAPHRAGM VALVES by Hakohav Valves ABOUT US QUALITY RELIABILITY Kim Valves started up as Hakohav Valves in 1963 by two young visionary engineers who set their goal to become

Industrial & Automotive Rubber Products

Industrial & Automotive Rubber Products For over 40 years, Kopak has been providing solutions to Industry in Rubber Products. We are specialists in providing a comprehensive technical source of products

Table of CONTENTS AB AB AB-138 (FDA) AB BLAST AB

7069-F (03-05-2018) Table of CONTENTS SECTION 1 : NATURAL (NR)...1. AB-131...1.1 AB-135...1.2 AB-138 (FDA)...1.3 AB-139 - BLAST...1.4 AB-148...1.5 SECTION 2 : SBR (Packing and Skirtboard)...2. IM-165...2.1

Air operated Pinch Valves Connection options:

Air operated Pinch Valves Connection options: Flange Connection Internal Thread Connection Tri-Clamp Connection Weld-on ends RJT Connection AKO Innovative Pinch Valve Technology The valve solution for

OPERATION MANUAL. DUCTILE Models NT100 NOMAD TRANS-FLO AIR-OPERATED DOUBLE DIAPHRAGM PUMPS. A JDA Global Company. 5/13 rev.2

OPERATION MANUAL NT100 NOMAD TRANS-FLO AIR-OPERATED DOUBLE DIAPHRAGM PUMPS DUCTILE Models A JDA Global Company 5/13 rev.2 CAUTION SAFETY POINTS TEMPERATURE LIMITS: Neoprene -17.8 C to 93.3 C 0 F to 200

E1 1" Bolted Plastic Pumps With Metallic Center Sections Operating Instructions

E1 1" Bolted Plastic Pumps With Metallic Center Sections Operating Instructions E1 Polypropylene E1 Kynar E1 1" Bolted Plastic Pump Optional Side Ports 8.06 [204.7] 1" ANSI 150# / DIN Fluid Discharge

Module 6: Chemical Resistance

Module 6: Chemical Resistance 1 Viton versus Other Elastomers classification according to ASTM 2000D Service temperature versus Oil No.3 325 Heat resistance Service Temperature ( C) 300 275 250 225 200

OPERATION MANUAL. ALUMINUM Models. 316 S.S. Models NTG25 NOMAD TRANS-FLO AIR-OPERATED DOUBLE DIAPHRAGM PUMPS. A JDA Global Company. 1/14 rev.

OPERATION MANUAL NTG25 NOMAD TRANS-FLO AIR-OPERATED DOUBLE DIAPHRAGM PUMPS ALUMINUM Models 316 S.S. Models A JDA Global Company 1/14 rev. 3 CAUTION SAFETY POINTS TEMPERATURE LIMITS: Neoprene -17.8 C to

Silicone Coolant Hose

ilicone Coolant Hose Distributor Product ist 0 ilicone & EPDM Hose Providing solutions in technical hose requirements for turbo charger, coolant and heater hose applications. ilicone Coolant Hose ilicone

Other Information. Section 6. Contained in this section: Actuator Diaphragm Identification. How To Order. Facts and Recommended Guidelines

Section 6 Other Information Contained in this section: How To Order Maintenance Instructions Flange Gasket and Storage Recommendations Actuator Diaphragm Identification Facts and Recommended Guidelines

OPERATOR S MANUAL

OPERATOR S MANUAL 670093 INCLUDING: OPERATION, INSTALLATION & MAINTENANCE RELEASED: 7-7-09 REVISED: 9-15-11 (REV. 07) 1/2 DIAPHRAGM PUMP 1:1 RATIO (NON-METALLIC) 670109 READ THIS MANUAL CAREFULLY BEFORE

MODEL 2002 PERISTALTIC PUMPS S E R I E S

MODEL PERISTALTIC PUMPS Features Dry pump cavity Self-priming operation Runs dry without damage Complete isolation of pumped fluid Heavy-duty roller bearings Wide range of pump configurations/flows No

ALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN

BUTTERFLY VALVES ALC-3 NOMINAL PRESSURE ANSI Class 150-600 PN 10-100 NOMINAL 2-80 DN 50-2000 MATERIALS Cast Iron Carbon Steel Low Alloy Steel CONNECTIONS Wafer Lugged Flanged Butt Weld DESIGN Eccentric

Style Flange Adapter

Style 007 -- Flange Adapter Style 007 -- Flange Adapter is used for connect switches where valves, equipments or pipes have a flange interface. It realizes the change between flange connection and grooved

O-RINGS METRIC SIZES AVAILABLE

METRIC SIZES AVAILABLE 16 97 ILLUSTRATIONS BELOW NOT TO SCALE Military Specification References Temperature Range F Drawing # Specification Static Dynamic Fluid Low High Elastomer Comments AN1295 For use

SEAL MANUFACTURERS & DISTRIBUTORS GASKET CUTTERS. Extrusions Brochure. Dublin: +353 (0) Cork: +353 (0)

SEAL MANUFACTURERS & DISTRIBUTORS GASKET CUTTERS Extrusions Brochure Dublin: +353 (0)1 427 7900 www.abbeyseals.ie Cork: +353 (0)21 500 3555 SEAL MANUFACTURERS & DISTRIBUTORS GASKET CUTTERS Dublin Cork

Datasheets - General Purpose Elastomers

Datasheets - General Purpose Elastomers Natural Rubber (NR) Market introduction 1840 Price indication, volume index compound 1,0 Service temperature, min C -50 Service temperature, max C +80 Mechanical

EXPLODED VIEW & PARTS LIST

SECTION 8 EXPLODED VIEW & PARTS LIST ALUMINUM, A300-*AA-****-*** 10 20 30 352 40 322 40 OPTIONAL 311 342 360 323 381 312 321 61 62 70 385 341 383 80 90 100 110 120 130 140 150 160 353 170 355 372 384 330

Instrument Pressure Range Standard Body psi max. High Flow Rate Body psi max.

Basic Information All ESP Types Overall Size Length............................ 12 3/4-in. Max. Diameter All Piston Type...................... 2 1/4-in. Max. 2-in. Diaphragm..................... 2 7/8-in.

0110 / 0112 / 0114 / 0116 / 0118 / 0122

00 / 02 / 04 / 06 / 08 / 022 Diaphragm pressure switches with integrated connector M. Setting ranges to up to 725 psi (50 bar) (higher settings refer to page 26) NC or NO, maximum voltage 42 V Zinc-plated

UNIDIRECTIONAL Knife Gate Valve

30/10/2013 UNIDIRECTIONAL Knife Gate Valve Unidirectional knife gate valve, with wafer design and quick opening and closing. Body made up of two screwed down halves, with slides to provide smooth operation.

Custom Rubber/Plastic Extrusions, and Moulded Rubber Specialists.

Custom Rubber/Plastic Extrusions, and Moulded Rubber Specialists. The Ambassador Industrial pledge; Is to provide you, our customer, with the very best quality product and service that will satisfy and

Unitech Auto Products is one of the leading manufacturers exporting and suppliers of O Rings, Oil. Rubber. We offer these at market leading rates.

+91-8048081857 Unitech Auto Products https://www.indiamart.com/unitechautoproducts/ Unitech Auto Products is one of the leading manufacturers exporting and suppliers of O Rings, Oil Seals, Rubber Gasket

D101 D103 D105. D Fender. 'Medium D' No. RUBF8033/565 wgt. 2.35kg L565 x W86 x D76mm No. RUBF8033 wgt kg L2550 x W86 x D76mm

Double Manufactured from Tough Durable Black Neoprene 'Large D' No. RUBFD101 wgt. 14.8kg Absorbs impact shock Countersunk mounting holes at 75mm centres Coil: 36.57mtr x W22 x H14mm Stainless steel retaining

R A S IVE P R O D U C T S

Volume 3 Global Abrasive Products, Inc. is pleased to provide you with our new full-line catalog. GAP s core values center on service, quality, competitiveness, and product breadth. As well, we have put

KNIFE GATE VALVES -- MODEL D

PRODUCT DESCRIPTION Flanged unidirectional knife gate valve for high pressure applications One piece integral cast body with seating wedges and bolted bonnet. High flow rates with low pressure drops. Several

E3 3" Bolted Metallic Pumps Operating Instructions

E3 3" Bolted Metallic Pumps Operating Instructions E3 Stainless Steel E3 Hastelloy C E3 Aluminum SPECIFICATIONS AND PERFORMANCE Versa-Matic Model E3 Bolted 3" Pump Flow Rate Adjustable to...... 0-230 gpm

PRESSURE RELIEF VALVE CONTROL VALVE

PRESSURE RELIEF VALVE CONTROL VALVE LEHRY Pressure Relief Valve, Sustaining or Backpressure Control Valve is designed to permitting flow when upstream pressure is above the adjustable setpoint of the control

Mobil Glygoyle Series Polyalkylene Glycol (PAG) Gear, Bearing and Compressor Lubricant

Mobil Glygoyle Series Polyalkylene Glycol (PAG) Gear, Bearing and Compressor Lubricant Product Description Mobil Glygoyle Series lubricants are supreme performance gear, bearing and compressor oils designed

UNIDIRECTIONAL Guillotine Valve

Unidirectional "LUG" guillotine valve. Monobloc cast body with interior slides for optimum movement of the gate during operation. Provides high flow rates with low pressure drop. Various seat and packing

general contents requisition form Hofland metallic and semi-metallic gaskets standard engineering plastic products

general requisition form 0 Hofland metallic and semi-metallic gaskets gasket materials and special gaskets other gasket materials Starpack gland packings O-rings oil seals tools and accesories general

RUBBER GASKET SHEET LOWES PDF

15 March, 2018 RUBBER GASKET SHEET LOWES PDF Document Filetype: PDF 203.93 KB 0 RUBBER GASKET SHEET LOWES PDF Fernco Donuts are flexible PVC rings for compression sealing of sewer pipe joints and DWV connections

KINGSTON. Model 710. Side Outlet Safety Relief Valve. Manufacturing reliable industrial valves for industry since 1908.

KEst.1908 KINGSTON Manufacturing reliable industrial valves for industry since 1908. Model 710 Side Outlet Safety Relief Valve Storm Manufacturing Group, Inc. 23201 Normandie Ave., Torrance, CA 90501-5050

DESIGN ENGINEERS O-RING SIZE GUIDE

DESIGN ENGINEERS O-RING SIZE GUIDE INTRODUCTION: Substantially all O-ring manufacturers present their catalog data in the rotation of groupings or families of cross-sectional thickness first, then followed

COB ADVANTAGES Quality, lightweight, durable nylon. 20% lighter than metal. Tough/shatter-proof and easily cleaned and maintained,

LOW PRESSURE NYLON EXPANSION PLUGS 0.5 to 6 CAST ALUMINUM EXPANSION PLUGS 1 1/2 TO 36 These superior, versatile, expandable plugs are used to accommodate a wide variety of industrial applications where

Catalog POWER TRANSMISSION BELT R TEK INTERNATIONAL. 214 Martin Dr, Wylie, Texas, 75098, USA

ADD: 214 MARTIN DR, WYLIE, TEXAS, 75098, USA TEL: +1 (817) 808 6335 FAX: +1 (817) 290 0537 EMAIL: info@rtekindustrial.com WEB: http://www. rtekindustrial.com 2009 2010 Catalog POWER TRANSMISSION BELT R

Model SMA3-A SLUDGEMASTER

SERVICE AND OPERATING MANUAL Model SMA3-A SLUDGEMASTER PLEASE NOTE! The photos shown in this manual are for general instruction only. YOUR SPECIFIC MODEL MAY NOT BE SHOWN. Always refer to the parts list

Heat-Shrinkable Tubing

H-Tap Insulating Covers (Hard Covers) Interlocking insulating covers for H-type compression taps Easy installation: place the H-Tap in the cover and snap the cover closed Consult your Regional Sales Office

Packing (Section IX)

Packing (Section IX) Part No. Description Page No. 3020 CHEMARES Tank Lid Packing 3 90 RAMIE Flax Packing for the Marine Trade 4 90G Lubricated RAMIE Flax Packing with Graphite 4 90T Flax Packing with

OPERATION MANUAL 1 POLYPROPYLENE PUMP DURA-FLO TM AIR DISTRIBUTION SYSTEM

OPERATION MANUAL 1 POLYPROPYLENE PUMP DURA-FLO TM AIR DISTRIBUTION SYSTEM CAUTIONS - READ FIRST CAUTION: Do not apply compressed air to the exhaust port pump will not function. CAUTION: Do not exceed 82

OPERATION MANUAL 2 POLYPROPYLENE PUMP DURA-FLO TM AIR DISTRIBUTION SYSTEM

OPERATION MANUAL 2 POLYPROPYLENE PUMP DURA-FLO TM AIR DISTRIBUTION SYSTEM CAUTIONS - READ FIRST CAUTION: Do not apply compressed air to the exhaust port pump will not function. CAUTION: Do not exceed 82

spirit POWERED AIR RESPIRATOR

spirit POWERED AIR RESPIRATOR advanced CONtrolability comprehensive protection spirit Intelligent and adaptable powered air respiratory system from Scott Safety Introducing the next generation of powered

POLYPAC - Selemaster SM. Single Acting Compact Rod Seal With Anti-extrusion Ring Material: Rubber + Fabric Reinforced Rubber + POM

Single Acting Compact Rod Seal With Anti-extrusion Ring Material: Rubber + Fabric Reinforced Rubber + POM 85 86 Selemaster SM The rod seal range has been designed to meet the needs of hydraulic equipments

Model SLUDGEMASTER SMA3-A

SERVICE AND OPERATING MANUAL Model SLUDGEMASTER SMA3-A OPERATING INSTRUCTIONS This pump has been tested prior to shipment from factory. The oil reservoir has been partially filled at testing with air motor

OPERATION MANUAL NT80 NOMAD TRANS-FLO AIR-OPERATED DOUBLE DIAPHRAGM PUMPS. A JDA Global Company. 5/13 rev.2

OPERATION MANUAL AIR-OPERATED DOUBLE DIAPHRAGM PUMPS A JDA Global Company 5/13 rev.2 CAUTION SAFETY POINTS TEMPERATURE LIMITS: Neoprene -17.8 C to 93.3 C 0 F to 200 F Buna-N -12.2 C to 82.2 C 10 F to 180

Orlando Supertop Supertop UHMWPE Real Everest Supertop LL Supertop LL UHMWPE Providence. Acid and chemical hose. Chem

Chem Orlando Supertop Supertop UHMWPE Real Everest Supertop LL Supertop LL UHMWPE Providence Acid and chemical hose Chem 236 Chem Orlando EPR :,,,. Ӏ,. IVG., 50 (+122 F),, IVG. : -40 (-40 F) +100 (+212

Tranquilizer Surge Suppressors for Air-Driven Diaphragm Pumps

SERVI & OPERATING MANUAL Tranquilizer Surge Suppressors for Air-Driven Diaphragm Pumps Metallic Construction Table of Contents Product and Operating Principle... Page 1 Materials and Operating Temperatures...

Vulcatec your partner for hot vulcanized gaskets

Vulcatec your partner for hot vulcanized gaskets About us Vulcatec has been delivering know-how and high quality products for over 30 years. As a specialist in the field of made-to-measured gaskets, we

Diaphragm pressure switches up to 42 V with brass housing. Brass housing M3 screw terminal Overpressure safety up to 500 psi (35 bar) 1) Male thread

0167 Diaphragm pressure switches with brass housing Brass housing M3 screw terminal Overpressure safety up to 500 psi (35 bar) Adjustment range tolerance at room temperature Male thread NO : NC : 36 Screw

UNIDIRECTIONAL Knife Gate Valve

UNIDIRECTIONAL Knife Gate Valve 24/04/2013 Unidirectional knife gate valve. One piece cast body with guides to support gate and seat wedges. Provides high flow rates with low pressure drop. Various seat

OPERATION MANUAL. ALUMINUM Models. 316 S.S. Models NTG50 NOMAD TRANS-FLO AIR-OPERATED DOUBLE DIAPHRAGM PUMPS. A JDA Global Company. 1/14 rev.

OPERATION MANUAL NTG50 NOMAD TRANS-FLO AIR-OPERATED DOUBLE DIAPHRAGM PUMPS ALUMINUM Models 316 S.S. Models A JDA Global Company 1/14 rev.3 CAUTION SAFETY POINTS TEMPERATURE LIMITS: Neoprene -17.8 C to

Gaskets. Fluid Handling Components. Bee Valve offers a full line of original and replacement gaskets to meet all your needs.

2009 Fluid Handling Components Gaskets Bee Valve offers a full line of original and replacement gaskets to meet all your needs. Bolted Tank Fitting Bulkhead Fitting Manifold System Cam Coupler Tank Lid

OPERATION MANUAL. ALUMINUM Models. 316 S.S. Models NTG40 NOMAD TRANS-FLO AIR-OPERATED DOUBLE DIAPHRAGM PUMPS. A JDA Global Company. 1/14, Rev.

OPERATION MANUAL NTG40 NOMAD TRANS-FLO AIR-OPERATED DOUBLE DIAPHRAGM PUMPS ALUMINUM Models 316 S.S. Models A JDA Global Company 1/14, Rev. 3 CAUTION SAFETY POINTS TEMPERATURE LIMITS: Neoprene -17.8 C to

Hose, Tubes & Ducting. Hose, Tubes & Ducting

Hose, Tubes & Ducting Hose, Tubes & Ducting 326 Together, we can power your business into the future Parker and Brammer: a partnership that brings your business the technologies, experience and international

VACOMASS. Technical information VACOMASS control valve. Version Diaphragm control valve with central or falling flow axis

VACOMASS Technical information Diaphragm control valve with central or falling flow axis Version 2012-02 DESCRIPTION OF CONSTRUCTION AND FUNCTION SPECIAL CHARACTERISTICS: Universal use: The slidegate valve

Anglomoil Hydraulic BIO-FR was designed to replace anti-wear, mineral oil based hydraulic fluids used in applications where fire hazards exist.

Product Description Anglomoil Hydraulic BIO-FR was designed to replace anti-wear, mineral oil based hydraulic fluids used in applications where fire hazards exist. Product Features & Benefits PRODUCT DATA

The advanced design guarantees the gradual opening and closing of the valve. This prevents damage caused by water hammer.

Plastic valve The Bermad 200 Series is a plastic valves series in the sizes ½" to 2", and is made from high-quality fibreglass-reinforced nylon. This makes these valves perfectly resistant to mechanical

Page 1 - Gearbox & Bearing Housing. Page 2 - Wet End - Rotor Case & Rotors (Part 1) Page 3 - Wet End - Rotor Case & Rotors (Part 2)

Spare Parts List Hy~Line Contents Page 1 - Gearbox & Bearing Housing Page 2 - Wet End - Rotor Case & Rotors (Part 1) Page 3 - Wet End - Rotor Case & Rotors (Part 2) Page 4 - Ports Page 5 - Single Mechanical

O-Rings & Circlips Catalogue

O-Rings & Circlips Catalogue 1 2 Contents O-Rings Table of Groove Dimensions for Dynamic & Static Sealing... 4 Resistance Properties of Various Elastomers... 5 Temperature Requirements... 6 Imperial: Guide