MODEL 2002 PERISTALTIC PUMPS S E R I E S

Transcription

1 MODEL PERISTALTIC PUMPS Features Dry pump cavity Self-priming operation Runs dry without damage Complete isolation of pumped fluid Heavy-duty roller bearings Wide range of pump configurations/flows No cups, packing or seals Low maintenance Reversible flow Industries Served by Vector Series Pumps Waste water and water treatment Chemical processing Petrochemicals Pulp and paper Ceramics Mining Paints and coatings Dairy processing Pharmaceuticals Cosmetics Materials of Construction Non-Wetted Parts Casing: aluminum alloy Rotor: aluminum alloy Rollers: plastic/alloy Wetted Parts Hose: EXTRUDED Neoprene, Hypalon, Varprene, Silicone, PharMed BRAIDED Natural rubber Inlet/Outlet Connections: Teflon, brass or stainless steel hose barb, brass NPT, and stainless steel sanitary tri-clamp Dimensions inches (mm) 4. (4).8 () 7.5 (9) 3.7 (94).3 (5.8).6 (4). (5) 5.4 (37) 5.9 (5) 7.6 (93) See Ordering Information for motor and gearbox sizes.3 (8) 6. (55) 6.7 (7) 7.4 (88)

2 Model.5 (-8 PSI).5 Ordering Information.375 A complete Vector pump order number uses a 9 character order code to identify the desired hose, fittings and drive. Select the appropriate items from the chart below and use the order code from each group to complete the pump assembly order number. Gallons Per Minute.5.5 Fluid Characteristics Viscosity Liquid Temperature Solid Size Fiber Length Specifications Discharge Pressure 5, cps (max) 8 F (8 C) (max) /6 inch (.6 mm) (max) /4 inch (6.3 mm) (max) 8 psi (. bar) max Suction Lift 7 ft (. m) Suction Pressure (max) 5 psi ( bar) Horsepower (max) /4 Weight Revolutions Per Minute Continuous Duty 6.5 lbs (3 kg) 4 6 Pumps are shaft driven and require a gearbox and motor. See Ordering Information for details..6 Horsepower Order Order Digit Code Description -4 Pump Designation Model Shaft Drive Pump 5-6 Hose Material/Type PE Neoprene, extruded VE Varprene, extruded HE Hypalon, extruded SE Silicone, extruded FE PharMed, extruded NF Natural Rubber, fiber-braided 7-8 Connector Material/Style AA Teflon, / hose barb CC 36 SST, Sanitary, 3/4 tri-clamp FF Brass, 3/8 hose barb GG Brass, 3/8 male NPT SS 36 SST, 3/8 hose barb 9 Drive Flow Gear Pump Max GPM Ratio RPM PSI Single Phase, /4 HP TEFC, 5-3 VAC, 6 Hz A.3 6: B.9 4: C.5 3: D.4 : E.5 5: Three Phase, /4 HP TEFC, 3-46 VAC, 6 Hz F.3 6: G.9 4: H.5 3: I.4 : J.5 5: Meets FDA and NSP for food handling. Maximum pressure: 3.5 psi. V-99- Rev. A /5/ Printed in U.S.A.

3 MODEL 3 PERISTALTIC PUMPS Features Dry pump cavity Self-priming operation Runs dry without damage Complete isolation of pumped fluid Heavy-duty roller bearings Wide range of pump configurations/flows No cups, packing or seals Low maintenance Reversible flow Industries Served by Vector Series Pumps Waste water and water treatment Chemical processing Petrochemicals Pulp and paper Ceramics Mining Paints and coatings Dairy processing Pharmaceuticals Cosmetics Materials of Construction Non-Wetted Parts Casing: aluminum alloy Rotor: aluminum alloy Rollers: plastic/alloy Wetted Parts Hose: EXTRUDED Neoprene, Hypalon, Varprene, Silicone, PharMed BRAIDED Natural rubber Inlet/Outlet Connections: Teflon, brass or stainless steel hose barb, brass NPT, and stainless steel sanitary tri-clamp Dimensions inches (mm) 5. (3).8 () 8. (3) 4.5 (4).3 (5.8).9 (48). (5) 6. (58) 6.7 (7) 8.5 (6) See Ordering Information for motor and gearbox sizes.3 (8) 6. (55) 6.7 (7) 7.7 (96)

4 Model (-8 PSI).5 Ordering Information A complete Vector pump order number uses a 9 character order code to identify the desired hose, fittings and drive. Select the appropriate items from the chart below and use the order code from each group to complete the pump assembly order number. Gallons Per Minute Fluid Characteristics Viscosity Liquid Temperature Solid Size Fiber Length Specifications Discharge Pressure 5, cps (max) 8 F (8 C) (max) /6 inch (.6 mm) (max) /4 inch (6.3 mm) (max) 8 psi (. bar) max Suction Lift ft (3. m) Suction Pressure (max) 5 psi ( bar) Horsepower (max) /4 Weight Revolutions Per Minute Continuous Duty lbs (4.5 kg) 4 6 Pumps are shaft driven and require a gearbox and motor. See Ordering Information for details..6 Horsepower Order Order Digit Code Description -4 Pump Designation 3 Model 3 Shaft Drive Pump 5-6 Hose Material/Type PE Neoprene, extruded VE Varprene, extruded HE Hypalon, extruded SE Silicone, extruded FE PharMed, extruded NF Natural Rubber, fiber-braided 7-8 Connector Material/Style AA Teflon, 3/4 hose barb CC 36 SST, Sanitary, 3/4 tri-clamp FF Brass, / hose barb GG Brass, / male NPT SS 36 SST, / hose barb 9 Drive Flow Gear Pump Max GPM Ratio RPM PSI Single Phase, /4 HP TEFC, 5-3 VAC, 6 Hz A.33 6: B.48 4: C.64 3: D.97 : E.8 5: Three Phase, /4 HP TEFC, 3-46 VAC, 6 Hz F.33 6: G.48 4: H.64 3: I.97 : J.8 5: Meets FDA and NSP for food handling. Maximum pressure: 3.5 psi. V3-99- Rev. A /5/ Printed in U.S.A.

5 MODEL 4 PERISTALTIC PUMPS Features Dry pump cavity Self-priming operation Runs dry without damage Complete isolation of pumped fluid Heavy-duty roller bearings Wide range of pump configurations/flows No cups, packing or seals Low maintenance Reversible flow Industries Served by Vector Series Pumps Waste water and water treatment Chemical processing Petrochemicals Pulp and paper Ceramics Mining Paints and coatings Dairy processing Pharmaceuticals Cosmetics Materials of Construction Non-Wetted Parts Casing: aluminum alloy Rotor: aluminum alloy Rollers: plastic/alloy Wetted Parts Hose: EXTRUDED Neoprene, Hypalon, Varprene, Silicone BRAIDED EPDM, Natural rubber Inlet/Outlet Connections: Teflon or stainless steel hose barb, stainless steel or carbon steel ANSI flange, brass or carbon seetl NPT, and stainless steel sanitary tri-clamp Dimensions inches (mm) 7.5 (9).4 (36).6 (95) 6.3 (6).3 (5.8).6 (66).3 (8) 8.7 () 9.3 (36). (35) See Ordering Information for motor and gearbox sizes. (5).4 () 7. (8) 7.9 () 9.3 (36)

6 Model 4 4. (- PSI).33 Ordering Information 3. A complete Vector pump order number uses a 9 character order code to identify the desired hose, fittings and drive. Select the appropriate items from the chart below and use the order code from each group to complete the pump assembly order number. Gallons Per Minute.. Fluid Characteristics Viscosity Liquid Temperature Solid Size Fiber Length Specifications Discharge Pressure 5, cps (max) 8 F (8 C) (max) /6 inch (.6 mm) (max) /4 inch (6.3 mm) (max) psi (.5 bar) max Suction Lift 4 ft (4.3 m) Suction Pressure (max) 8 psi (. bar) Horsepower (max) /3 Weight Revolutions Per Minute Continuous Duty lbs (9 kg) 4 6 Pumps are shaft driven and require a gearbox and motor. See Ordering Information for details..5 Horsepower Order Order Digit Code Description -4 Pump Designation 4 Model 4 Shaft Drive Pump 5-6 Hose Material/Type PE Neoprene, extruded VE Varprene, extruded HE Hypalon, extruded SE Silicone, extruded EF EPDM, fiber-braided NF Natural Rubber, fiber-braided 7-8 Connector Material/Style AA Teflon, hose barb BB 36 SST, 3/4 ANSI flange CC 36 SST, Sanitary, tri-clamp DD Carbon Steel, 3/4 ANSI flange EE Carbon Steel, 3/4 male NPT GG Brass, 3/4 male NPT SS 36 SST, 3/4 hose barb 9 Drive Flow Gear Pump Max GPM Ratio RPM PSI Single Phase, /4 HP TEFC, 5-3 VAC, 6 Hz A.86 6: 3 B.43 35: 5 D.5 : 88 8 Single Phase, /3 HP TEFC, 5-3 VAC, 6 Hz E : Three Phase, /4 HP TEFC, 3-46 VAC, 6 Hz F.86 6: 3 G.43 35: 5 I.5 : 88 8 Three Phase, /3 HP TEFC, 3-46 VAC, 6 Hz J : V4-99- Rev. A /5/ Printed in U.S.A.

7 MODEL 5 PERISTALTIC PUMPS Features Dry pump cavity Self-priming operation Runs dry without damage Complete isolation of pumped fluid Heavy-duty roller bearings Wide range of pump configurations/flows No cups, packing or seals Low maintenance Reversible flow Industries Served by Vector Series Pumps Waste water and water treatment Chemical processing Petrochemicals Pulp and paper Ceramics Mining Paints and coatings Dairy processing Pharmaceuticals Cosmetics Materials of Construction Non-Wetted Parts Casing: aluminum alloy Rotor: aluminum alloy Rollers: plastic/alloy Wetted Parts Hose: EXTRUDED Neoprene, Hypalon, Varprene, Silicone Dimensions inches (mm) BRAIDED EPDM, Hypalon, Nitrile rubber, Natural rubber (regular and heavy duty) Inlet/Outlet Connections: Teflon or stainless steel hose barb, stainless steel or carbon steel ANSI flange,teflon NPT, and stainless steel sanitary tri-clamp. (57) 3.6 (9).6 (4).6 (5) 9.4 (39).8 (74) 7.4 (44) 8.6 (8).3 (33).8 ().43 (.8) 5.7 (399) 7.3 (439) 9. (483) 6. (4)

8 Model 5. (-37 PSI).75 Ordering Information 9. A complete Vector pump order number uses a 9 character order code to identify the desired hose, fittings and drive. Select the appropriate items from the chart below and use the order code from each group to complete the pump assembly order number. Gallons Per Minute Fluid Characteristics Viscosity Liquid Temperature Solid Size Fiber Length Specifications Discharge Pressure 5, cps (max) 8 F (8 C) (max) /8 inch (3. mm) (max) / inch (.7 mm) (max) 37 psi (.6 bar) max Suction Lift 6.5 ft (5. m) Suction Pressure (max) 5 psi (.7 bar) Horsepower (max) 3/4 Weight Revolutions Per Minute Continuous Duty 4 lbs (8 kg) 4 6 Pumps are shaft driven and require a gearbox and motor. See Ordering Information for details..5 Horsepower Order Order Digit Code Description -4 Pump Designation 5 Model 5 Shaft Drive Pump 5-6 Hose Material/Type PE Neoprene, extruded VE Varprene, extruded HE Hypalon, extruded SE Silicone, extruded BF Nitrile Rubber, fiber-braided EF EPDM, fiber-braided HF Hypalon, fiber-braided NF Natural Rubber, fiber-braided MF Natural Rubber, fiber-braided (heavy duty) 7-8 Connector Material/Style AA Teflon, -/4 hose barb BB 36 SST, ANSI flange CC 36 SST, Sanitary, -/ tri-clamp DD Carbon Steel, ANSI flange HH Teflon, male NPT SS 36 SST, hose barb 9 Drive Flow Gear Pump Max GPM Ratio RPM PSI Three Phase, / HP TEFC, 3-46 VAC, 6 Hz A.5 56: 3 37 B : Three Phase, 3/4 HP TEFC, 3-46 VAC, 6 Hz C 5.9 4: 7 9 Three Phase, HP TEFC, 3-46 VAC, 6 Hz D 7.9 8: 94 9 V5-99- Rev. A /5/ Printed in U.S.A.

9 MODEL 6 PERISTALTIC PUMPS Features Dry pump cavity Self-priming operation Runs dry without damage Complete isolation of pumped fluid Heavy-duty roller bearings Wide range of pump configurations/flows No cups, packing or seals Low maintenance Reversible flow Industries Served by Vector Series Pumps Waste water and water treatment Chemical processing Petrochemicals Pulp and paper Ceramics Mining Paints and coatings Dairy processing Pharmaceuticals Cosmetics Materials of Construction Non-Wetted Parts Casing: aluminum alloy Rotor: aluminum alloy Rollers: plastic/alloy Wetted Parts Hose: EXTRUDED Neoprene, Hypalon, Varprene, Silicone Dimensions inches (mm) BRAIDED Hypalon, Nitrile rubber, Natural rubber (regular and heavy duty) Inlet/Outlet Connections: Teflon or stainless steel hose barb, stainless steel or carbon steel ANSI flange, Teflon NPT, and stainless steel sanitary tri-clamp 4.3 (363) 5.8 (47). (56). (5) 3. (33) 6. (46).5 (57) 3. (33).4 (33). (5).55 (4.).7 (55) 3.6 (599) 5.8 (655).9 (556)

10 Model 6. (-6 PSI). Ordering Information 5. A complete Vector pump order number uses a 9 character order code to identify the desired hose, fittings and drive. Select the appropriate items from the chart below and use the order code from each group to complete the pump assembly order number. Gallons Per Minute. 5. Fluid Characteristics Viscosity Liquid Temperature Solid Size Fiber Length Specifications Discharge Pressure 5, cps (max) 8 F (8 C) (max) /8 inch (3. mm) (max) / inch (.7 mm) (max) 6 psi (4. bar) max Suction Lift ft (6. m) Suction Pressure (max) 5 psi (.7 bar) Horsepower (max) Weight Revolutions Per Minute Continuous Duty 95 lbs (43 kg) 4 6 Pumps are shaft driven and require a gearbox and motor. See Ordering Information for details..5 Horsepower Order Order Digit Code Description -4 Pump Designation 6 Model 6 Shaft Drive Pump 5-6 Hose Material/Type PE Neoprene, extruded VE Varprene, extruded HE Hypalon, extruded SE Silicone, extruded BF Nitrile Rubber, fiber-braided HF Hypalon, fiber-braided NF Natural Rubber, fiber-braided MF Natural Rubber, fiber-braided (heavy duty) 7-8 Connector Material/Style AA Teflon, -/4 hose barb BB 36 SST, -/4 ANSI flange CC 36 SST, Sanitary, -/ tri-clamp DD Carbon Steel, -/4 ANSI flange HH Teflon, -/4 male NPT SS 36 SST, -/4 hose barb 9 Drive Flow Gear Pump Max GPM Ratio RPM PSI Three Phase, -/ HP TEFC, 3-46 VAC, 6 Hz A 7. 43: 4 6 Three Phase, HP TEFC, 3-46 VAC, 6 Hz B.3 3: C 4. : D 8.5 7: 9 V6V-99- Rev. A /5/ Printed in U.S.A.

11 MODEL 7 PERISTALTIC PUMPS Features Dry pump cavity Self-priming operation Runs dry without damage Complete isolation of pumped fluid Heavy-duty roller bearings Wide range of pump configurations/flows No cups, packing or seals Low maintenance Reversible flow Industries Served by Vector Series Pumps Waste water and water treatment Chemical processing Petrochemicals Pulp and paper Ceramics Mining Paints and coatings Dairy processing Pharmaceuticals Cosmetics Materials of Construction Non-Wetted Parts Casing: aluminum alloy Rotor: aluminum alloy Rollers: plastic/alloy Wetted Parts Hose: EXTRUDED Varprene BRAIDED Hypalon, Nitrile rubber, Natural rubber (regular and heavy duty) Inlet/Outlet Connections: Teflon or stainless steel hose barb, stainless steel or carbon steel ANSI flange, Teflon NPT, Dimensions inches (mm) 8. (457).8 (7) and stainless steel sanitary tri-clamp.55 (4.) 5. (386) 6.5 (673) 6. (57). (5) 6.5 (49) 8.5 (47) 8.6 (76) 3.8 (97). (5) 5.6 (65) 7.6 (7) 3.8 (78)

12 Model 7 5. (-6 PSI) 3. Ordering Information 37.5 A complete Vector pump order number uses a 9 character order code to identify the desired hose, fittings and drive. Select the appropriate items from the chart below and use the order code from each group to complete the pump assembly order number. Gallons Per Minute 5..5 Fluid Characteristics Viscosity Liquid Temperature Solid Size Fiber Length Specifications Discharge Pressure 5, cps (max) 8 F (8 C) (max) /4 inch (6.3 mm) (max) / inch (.7 mm) (max) 6 psi (4. bar) max Suction Lift ft (6. m) Suction Pressure (max) 5 psi (.7 bar) Horsepower (max) 3 Weight Revolutions Per Minute Continuous Duty 85 lbs (84 kg) 4 6 Pumps are shaft driven and require a gearbox and motor. See Ordering Information for details.. Horsepower Order Order Digit Code Description -4 Pump Designation 7 Model 7 Shaft Drive Pump 5-6 Hose Material/Type VE Varprene, extruded BF Nitrile Rubber, fiber-braided HF Hypalon, fiber-braided NF Natural Rubber, fiber-braided MF Natural Rubber, fiber-braided (heavy duty) 7-8 Connector Material/Style AA Teflon, hose barb BB 36 SST, ANSI flange CC 36 SST, Sanitary, tri-clamp DD Carbon Steel, ANSI flange HH Teflon, male NPT SS 36 SST, -/4 hose barb 9 Drive Flow Gear Pump Max GPM Ratio RPM PSI Three Phase, HP TEFC, 3-46 VAC, 6 Hz A : 3 6 B.4 43: 4 6 C : 5 5 Three Phase, 3 HP TEFC, 3-46 VAC, 6 Hz D 4.5 : 8 38 V7-99- Rev. A /5/ Printed in U.S.A.