OMP POSITIVE DISPLACEMENT FLOWMETERS

Transcription

1 OMP POSITIVE DISPLACEMENT FLOWMETERS Flow Pressure Level Temperature measurement monitoring control Flow Ranges from 0.53 to 26 GPH to 4 to 92 GPM Handles Viscosities to 1,000,000 cps Pressure Ratings to 8,000 PSIG Available Low Head Loss Oval Gear Design Pulse Output, Mechanical Displays and LCD Displays Available S4 Order from: C A Briggs Company 622 Mary Street; Suite 101; Warminster, PA Phone: ; Fax: Sales@cabriggs.com - Model: OMP 161

2 Features Flow Ranges From 0.53 to 26 GPH Through 4 to 132 GPH Handles Viscosities to 1,000,000 cps Pressure Ratings to 8,000 PSIG Available Low Head Loss Oval Gear Design The KOBOLD series OMP combines high accuracy, repeatability and low cost with a variety of material combinations allowing it to solve just about any flow metering problem. The OMP series positive displacement flowmeters use an oval gear design to accurately meter the flow of viscous liquids. The oval gear design provides highly precise measurements with a lower pressure drop relative to other types of gear type meters. The OMP low flow series are available with ryton bodies for lower pressure applications and stainless steel bodies for pressures up to 8000 PSIG. The standard gear design can measure fluids with viscosities up to 1000 centipoise with special gear designs available for high viscosities. A pulse output is provided for input to a variety of display, batch control or distributed control systems. Specifications Available Flow Ranges: OMP-1: 0.53 to 26 GPH OMP-2: 4 to 130 GPH Maximum Pressure Ryton Body: 75 PSIG SS Body: 150 PSIG standard, 800 or 8000 PSIG optional Max. Differential Pressure: 14.5 PSI Wetted Components Body: Ryton or 316 stainless steel Gears: OMP-1: 316 stainless steel and teflon OMP-2: 316 stainless steel and carbon Optional: Ryton gears with hastelloy C shafts (Ryton body only) Shafts Standard: 316 stainless steel Optional: Ryton gears with hastelloy C shafts (Ryton body only) O-ring: Viton standard, EPDM or teflon optional Maximum Operating Temp. Ryton Body: 175 F SS Body: 250 F Minimum Viscosity: 5 centipoise (lower viscosities possible with reduced measuring range) Maximum Viscosity Standard: 1000 centipoise Optional (OMP-2 only): to 1,000,000 centipoise with reduced measuring range Accuracy: Repeatability: Normal K-Factor OMP-1: OMP-2: Output Type: Optional Output: Elec. Protection: Filtration Requirements: 1% of reading 0.03% of reading 3785 pulses/gallon 1514 pulses/gallon NPN Open Collector, 5-24 VDC Power 4-20 ma transmitter NEMA 3R/IP mesh Viscosity Max. Flow Viscosity Max. Flow <2,500 cps 132 GPH <25,000 cps 52 GPH <3,000 cps 118 GPH <40,000 cps 39 GPH <4,000 cps 105 GPH <95,000 cps 13 GPH <5,000 cps 92 GPH <450,000 cps 6.6 GPH <8,000 cps 79 GPH <1,000,000 cps 6.6 GPH <12,000 cps 66 GPH OMP-1 & OMP-2 Low Flow Series Maximum Flowrate Limit vs. Viscosity for Optional High Viscosity Gears, OMP-2 Series 162 Subject to change without prior notice.

3 OMP-1 and OMP-2 Ordering Information OMP = Positive Displacement Flowmeter Flow Range 1 = 0.53 to 26 GPH 2 = 4 to 132 GPH Body Material R = Ryton Body L = Stainless Steel Body 150 PSIG Max. Pressure I = Stainless Steel Body 800 PSIG Max. Pressure H = Stainless Steel Body, 8,000 PSIG Max. Pressure N2 Fitting = 1/4 NPT V J T O-Ring Material = Viton (standard) = EPDM =Teflon Options A5 = 2-wire 4-20 ma module in place of pulse output {Note: Remote module for body material R, L & I integral module for body material H} C = Ryton Gears with Hastelloy C Shafts (Ryton Body Only) P = High Viscosity Gears for Viscosity > 1000 Centipoise (for OMP-2 only) S4 OMP I - N2 - V - P Example Standard Version High Pressure Version Subject to change without prior notice. 163

4 Features 1/2 Through 2 sizes Flow Ranges 0.26 to 8 GPM Through 4.0 to 92 GPM Pulse Output, Mechanical or Electronic Displays Aluminum or Stainless Steel Bodies Handles Viscosities to 1,000,000 Centipoise with Special Rotor Low Head Loss, Oval Gear Design Specifications Maximum Pressure Threaded Meters with Pulse or LCD Display: 800 PSIG Threaded Meters with Mechanical Display: 500 PSIG Max. Differential Pressure: 14.5 PSI Wetted Components Body: Aluminum or 316 Stainless steel Gears: Ryton standard, optionally 316 SS Shafts: O-ring: 316 SS Buna-N standard, Viton, EPDM or Teflon optional Maximum Operating Temp. Ryton Gears: 175 F SS Gears: 250 F OMP Series Medium & High Flow Meters Minimum Viscosity: 5 centipoise (lower viscosities possible with reduced measuring range) Accuracy: ± 0.5% for pulse (% of reading) & LCD ±1% for mechanical series Maximum Viscosity Standard: 1000 centipoise Optional: To 1,000,000 centipoise with high viscosity rotors (reduced measuring range) Output Type: Displays LCD: Mechanical: NPN open collector, pulse 5-24 VDC, 25 ma Max. NEMA 6/IP66 Rate, re-settable and non-resettable total, 9V lithium battery powered, up to gallons. With additional pulse output. NEMA 4X/IP65 6 digit nonresettable with resettable 4 digit batch totalizer Maximum Flowrate Limit vs. Viscosity for Optional High Viscosity Gears Viscosity Max. Flow Max. Flow Max. Flow Max. Flow 1/2 Meter 1 Meter 1-1/2 Meter 2 Meter <2,500 cps 7.9 GPM 31.7 GPM 66.0 GPM 92.0 GPM <3,000 cps 7.1 GPM 28.5 GPM 59.4 GPM 86.0 GPM <4,000 cps 6.3 GPM 25.3 GPM 52.8 GPM 74.0 GPM <5,000 cps 5.5 GPM 22.2 GPM 46.2 GPM 65.0 GPM <8,000 cps 4.7 GPM 19.0 GPM 39.6 GPM 56.0 GPM <12,000 cps 3.9 GPM 15.8 GPM 33.0 GPM 46.0 GPM <25,000 cps 3.1 GPM 12.7 GPM 26.4 GPM 37.0 GPM <40,000 cps 2.3 GPM 9.5 GPM 19.8 GPM 28.0 GPM <95,000 cps 1.5 GPM 6.3 GPM 13.2 GPM 18.5 GPM <450,000 cps 0.7 GPM 3.2 GPM 6.6 GPM 9.2 GPM <1,000,000 cps 0.4 GPM 1.6 GPM 3.3 GPM 4.6 GPM 164 Subject to change without prior notice.

5 OMP Medium and High Flowmeter Ordering Information Flow Range Fitting Size Order Number Order Number Recommended GPM NPT Stainless Steel Aluminum Filtration /2 OMP-1204 OMP mesh OMP-1210 OMP mesh /2 OMP-1240 OMP mesh (ANSI Flange Only) OMP-1250 OMP mesh Option Code Description Options -A5 2-wire 4-20 ma module in place of pulse output (not with option -L or -M) -F1 150 LB ANSI flanged fittings for 1 flowmeter -F4 150 LB ANSI flanged fittings for 1-1/2 flowmeter -L LCD rate & total display with pulse output -M Mechanical totalizing display with resettable batch counter (no pulse output) -OR2 Viton O-ring in place of Buna-N -OR3 EPDM O-ring in place of Buna-N -OR5 Teflon O-ring in place of Buna-N -S Stainless steel gears -VP High viscosity ryton gears (for viscosity > 1000 centipoise) -VS High viscosity stainless steel gears (for viscosity > 1000 centipoise) S4 1/2 Flowmeter without Display Flowmeters Without Display Subject to change without prior notice. 165

6 1 Flowmeter without Display Flowmeters Without Display (SS) 5.23 (Alum.) /2 Flowmeter without Display (SS) 5.23 (Alum.) Flowmeter without Display Subject to change without prior notice.

7 Flowmeters With LCD Display 1/2 Flowmeter w/ LCD Display Flowmeter w/ LCD Display S SS 5.23 (Alum.) /2 Flowmeter w/ LCD Display SS Subject to change without prior notice. 167

8 2 Flowmeter w/ LCD Display Flowmeters With LCD Display /2 Flowmeter w/ Mechanical Display Flowmeters With Mechanical Display Flowmeter w/ Mechanical Display (SS) 5.23 (Alum.) Subject to change without prior notice.

9 Flowmeters With Mechanical Display 1-1/2 Flowmeter w/mechanical Display Flowmeter w/ Mechanical Display S Subject to change without prior notice. 169

10 Application Guide OMP Positive Displacement Flowmeter Application Guide C A Briggs Company Form # OMP Mary Street; Suite 101 Rev. 02/06/02 Warminster, PA Phone: FAX to: Fax: KOBOLD Instruments Inc Sales@cabriggs.com (USA) (Canada) Customer Name: Company Name: Phone: Fax: Quote #: Date: Price: Each Part Number: * To ensure fast order processing, please retain the completed quote form and send it along with your purchase order. Design Conditions Accurate design pressure and temperature are essential to ensure the flowmeter will be built to operate without damage. Please fill out accurately and completely. Process Conditions List Design Conditions 1. Pressure: Maximum PSIG 2. Temperature: Maximum F 1. Type of Liquid: 4. Desired Measuring Range: GPM 2. Normal Operating Temperature: F 5. Maximum Liquid Viscosity : 3. Line Size: Body Materials For OMP-1 and OMP-2 Low Flow Series: Ryton 316 SS (150 PSIG) 316 S (800 PSIG) 316 SS(8000 PSIG) For Medium and High Flow Series: Aluminum 316 SS Flowmeter Options OMP-1 and OMP-2 Low Flow Series EPDM seals Ryton gears w/ hastelloy C shafts (ryton bodies only) Teflon seals 2-wire 4-20 ma transmitter High viscosity gears (OMP-2 only) Flowmeter Options - OMP Medium and High Flow Series Viton seals LCD rate total display EPDM seals Stainless steel gears Teflon seals High viscosity stainless steel gears 2-wire 4-20 ma transmitter High viscosity ryton gears Mechanical totalizer FAX to KOBOLD Instruments Inc (USA) (Canada) Visit KOBOLD Online at Quoted By: Phone: Fax: 170 Subject to change without prior notice.