H A W K I N S - G R A V E S E S

Transcription

1 H A W K I N S - G R A V E S E S Ṭ C A T C Wards Road Lynchburg, VA Fax:

2 N Airport Rd. 460 Rd. 29 W E Leesville Rd. 460 Co Rd. 224 Airport Lynchburg Rgn./ Preston Glenn Fld. Wards Rd. 29 Co Rd. 579 Pine Lake S Wards Rd. Co Rd. 738 Hawkins-Graves Wards Road Lynchburg, VA

3 Ride-On Trowels Walk-Behind Trowels Concrete Screeds Concrete & Masonry 1 Concrete Pumps Trowel Blades Float Pans Concrete Saws Concrete Blades Masonry Saws Scarifiers Grinders/ Accessories Mortar Mixers Hoists Concrete Vibrators / Accessories Concrete Buckets / Accessories Masonry Equipment Masonry Hand Tools Concrete Finishing Tools 9

4 RIDE-ON TROWELS HD & HDX SERIES HYDRA-DRIVE SERIES All-Hydraulic riders are the largest, most powerful and most reliable available. MODEL HD560 HDX600 Engine Turbo Charged Kubota Diesel 99 HP 44 HP Dimensions (L x W x H) 144" x 66" x 64" 108.5" x 50.5" x 56" Panning Path Width 139" 100" Rotors (Diameter) 60" 6-Bladed Spider 46.5" 5-Bladed Spider Maximum Rotor Speed 135 RPM 135 RPM Weight 3,055 Lbs. 1,613 Lbs. Fuel Capacity 20 Gal. 11 Gal. HD560 HDX600 MP SERIES MECHANICAL-DRIVE PRO SERIES Riders deliver value and versatility with manual lever steering and range of gasoline engine options. MP205 MODEL MP305 MP205 MP225 EDGER Engine 24 or 27 HP 20, 24 or 27 HP 24 or 27 HP Kohler Air-Cooled Gas Kohler Air-Cooled Gas Kohler Air-Cooled Gas Dimensions (L x W x H) 100" x 50" x 55" 84" x 41" x 55" 88" x 40" x 54" Panning Path Width 96" 74" 85" Rotors (Diameter) 46" 4-Bladed Spider 36" 4-Bladed Spider 36" 4-Bladed Spider Maximum Rotor Speed RPM RPM RPM Application Finishing and Light Duty Panning Finishing and Panning Edging, Finishing and Panning Weight Depending on Engine Lbs Lbs. 762 Lbs. Fuel/Retardant Capacity 6 Gal. 6 Gal. 6 Gal. MP305 MSP SERIES MECHANICAL-DRIVE SUPER PRO SERIES Riders are available in either hydraulic power or manual lever steering with both diesel and gasoline engine options. MSP460 MODEL MSP460 MSP425 MSP415 Engine 44 HP 34 HP 35 HP Vanguard Air-Cooled Gas Turbo Charged Kubota Diesel Vanguard Liquid-Cooled Gas Vanguard Air-Cooled Gas Dimensions (L x W x H) 101.5" x 50.5" x 59.5" 100" x 50" x 57" 101.5" x 50.5" x 58" Panning Path Width 95" 95" 97.5" Rotors (Diameter) 46" 5-Bladed Spider 46" 5-Bladed Spider 46" 5-Bladed Spider Maximum Rotor Speed 140 RPM 165 RPM 145 RPM Weight 1,450 Lbs. 1,132 Lbs. 1,047 Lbs. Steering Power Power Manual Cruise Control Yes No No Fuel/Retardant Capacity 6 Gal. 6 Gal. 6 Gal

5 WALK-BEHIND TROWELS / BLADES / PANS WALK-BEHIND TROWELS 1. Fingertip throttle control. 2. Safety switch. 3. Stabilizer ring (on 446 Series). 4. Wide range of engine options. 5. Cast iron spiders, pressure plates and lift levers are built to provide years of trouble-free service. PRO SERIES STANDARD FEATURES 6. Lifting bar. 7. Lifting hook. 8. Padded handle. 9. Height adjustable handle. Economy 436 Pro Edger 1 MODEL PRO446SHD PRO 446SD PRO 446 PRO & ECONOMY 436 PRO 436 EDGER PR 430 EDGER Engine: Honda or Subaru 13 HP 11 HP 9 or 11 HP 5.5, 6 or 9 HP 5.5 or 9 HP 5.5 HP Dimensions (L x H) 89" x 39" 89" x 39" 89" x 39" 70" x 38" 84" x 38" 60" x 36" Rotor Diameter 46" 5-Blades 46" 4-Blades 46" 4-Blades 36" 4-Blades 36" 4-Blades 30" 4-Blades Maximum Rotor Speed 118 RPM 118 RPM 118 RPM 118 RPM 118 RPM 118 RPM Weight 390 Lbs Lbs Lbs Lbs. 196 Lbs. 223 Lbs. Trowel Arms and Spider Super Duty Super Duty Standard Duty Standard Duty or Standard Duty Standard Duty (SHD Gearbox) Economy Gear Box and Standard Duty Spider COMPODISK Exclusive and patented Compodisk is a new and exciting composite pan acoustically matched to the concrete to be processed. The Compodisk has acoustic impedance which matches the concrete, thereby imparting its energy into the concrete mass. This causes the concrete to set from the bottom of the slab to the top while maintaining an open surface, allowing the bleed water to escape during the finishing process. This new technology of floating disk is made from a composite material and is only available by Allen. PANS / BLADES A complete line of finish blades, combination blades and clip-on float shoes for your walk-behind or ride-on power trowel. We use high quality steel and high strength rivets to maximize blade life. Premium finishing blades are manufactured to high tolerances to provide the highest F-Numbers possible. For the flattest floors, trust only Allen Finishing Blades. Allen Engineering pioneered the use of floating discs (or pans) on riding trowels in 1989 and Allen Pans remain today the finisher s choice when high F-Numbers are specified on a concrete floor. Allen s flat pan tolerances cut bumps and fill low spots in the concrete floor

6 SCREEDS Air Vibration Screeds Our air-driven screeds feature precision engineered naval bronze piston vibrators that are rust resistant, non-sticking and free-starting. Engine-Driven Screeds With engine options ranging from 5.5 HP to 11 HP, there s a steel screed for virtually every size floor finishing operation. 1. Quick disconnect system. 2. Replaceable greaseable bearings. 3. Eccentric vibrator weights. 4. Wide range of engine options. 5. Triangular frame with vibration proof welds. 12HED Steel Screed 6. Manual winch is standard. 7. Bolt-on replaceable blades. 8. Low profile engine option (steel screed only). Straddle mount engine standard on aluminum truss screed. 9. Convertible to air vibration version. 10. Hydraulic winch option. MODEL 12HD 12HED 12ECS Frame Construction Steel Steel Aluminum Vibration System Dual Air Eccentric Shaft Eccentric Shaft Section Lengths/Weights 2 Ft: 37 Lbs. 37 Lbs. 24 Lbs. 2.5 Ft: 47 Lbs. 46 Lbs. 34 Lbs. 5 Ft: 93 Lbs. 90 Lbs. 60 Lbs. 7.5 Ft: 138 Lbs. 135 Lbs. 90 Lbs. 10 Ft: 186 Lbs. 180 Lbs. N/A Maximum Width 65 Ft. 65 Ft. 50 Ft. Blades - Galvanized Steel 10 Gauge 10 Gauge 12 Gauge MAGIC SCREED Precision engineered, lightweight wet screed for single operator fast strike-off of concrete. Fast and easy to use, this high-frequency screed provides uniform distribution over the entire blade length, enhancing structural integrity of the concrete through consolidation. MODEL Engine Handles Weight HD Stroke, 1.5 HP, 35 cc Adjustable 30 Lbs. AVAILABE WIDTHS AND WEIGHTS (NO ENGINE): 4 ft. 6 lbs., 6 ft. 10 lbs., 8 ft. 13 lbs., 10 ft. 16 lbs., 12 ft. 20 lbs., 14 ft. 23 lbs. 1. Quick-change screed blade. 2. Anti-vibrating system. 3. Carrying bars. 4. Ergonomically designed grips. 5. Smooth operating throttle. 6. Lightweight but powerful engine. 7. Tilt-up stand. Bridge Deck Finishers Our Bridge Deck Finishers are quickly becoming the choice for high-volume bridge pours. Two models are available with many accessories, so there s an Allen Paver for every bridge pour, and built to the highest tolerances for any jobs. MODEL 4836B 6048B Console engine 25 Hp Kohler 25 Hp Kohler air-cooled gas Paving carriage engine 25 Hp Kohler 25 Hp Kohler air-cooled gas Paving rollers dual 48" (1219mm) 60" (1523mm) Augers dual adjustable 8" (203mm) 8" (203mm) Section widths available 3', 4', 6', 12', 15' 3', 4', 6', 12', 15' (1, 1.2, 1.8, 3.7, 4.6m) (1, 1.2, 1.8, 3.7, 4.6m) Bogies-driver w/cupped wheels Two 36" (914mm) Two 48" (1219mm) Bogies-idler w/cupped wheels Two 36" (914mm) Two 48" (1219mm) Legs (w/solid leg plates) 4" (101mm) 6" (152 mm) 44" (1118mm) 44" (1118mm) vertical adj. vertical adj

7 ROLLER TUBES ROLLER TUBE FINISHERS ENGINE DRIVE RTF 2.5 HP, 4-cycle Honda Engine. 18:1 gear ratio transmission. Automatic centrifugal clutch. Right angle drive gear box. Wheel assembly. Power unit storage box. HYDRAULIC DRIVE RTF Drive unit features a Webster control valve HP Subaru engine with electric start. 4.5 GPM hydraulic system at PSI. 50-foot Quick Disconnect Hose is standard. Removable frame for maintenance. Hydraulic cooling system with 12-volt fan. ENGINE DRIVE ENGINE Engine 2.5 HP 4-cycle Honda HYDRAULIC DRIVE HYDRAULIC Engine 13.5hp Air-Cooled TRIPLE ROLLER TUBE PAVERS Precision engineered tubes ensure the smoothest pavement possible. Powered by rugged gasoline or diesel engines, with easy-to-operate control systems, the Triple Roller Tube Paver can strike off concrete fast. And with our precision engineered and level-tested roller tubes, you can be assured of producing the flattest paving job possible. Three models available or customizable to your specifications. AVAILABLE WIDTHS WEIGHT (tube) 6 Ft. 53 Lbs. 8 Ft. 66 Lbs. 10 Ft. 78 Lbs. 12 Ft. 90 Lbs. 14 Ft. 103 Lbs. 16 Ft. 117 Lbs. 18 Ft. 131 Lbs. 20 Ft. 145 Lbs. 22 Ft. 158 Lbs. 24 Ft. 172 Lbs. 26 Ft. 186 Lbs CD 150B MODEL 255CD 200C 150B Engine 44 HP Kubota Diesel 34 HP Vanguard Gasoline 27 HP Gasoline Widths Available (2 ft. increments) Ft Ft Ft. Weight at 22 Ft. 5,570 Lbs. 3,835 Lbs. 2,790 Lbs. Roller Tube Diameter 10" 8-5/8" 6-5/8" Tube Weight per Ft. 27 Lbs. 29 Lbs. 19 Lbs. Hydraulic Oil Reservoir 25 Gal Gal Gal. Hydraulic Spray System Standard Optional Optional Hydraulic Steering Leg Standard Standard Optional

8 SPRAYERS / VIBRATORS SPRAYERS Powerful, reliable and durable sprayers are the preferred tool for applying release agents and water-based sealants and curing compounds on concrete construction sites. The continuous recirculating system ensures your material is always well mixed and ready to spray. Available in barrel, cart or tow. 7560XL Barrel mount configuration is standard. Spray gun fan tip 4020 and 50' (7.6m) of hose are standard on sprayers Barrels not included. MODEL XL Engine 5.5 HP Gasoline Engine 4 HP Gasoline Engine Maximum Flow Rate 9.5 Gallons per Minute 7.5 Gallons per Minute Pump Type Diaphragm Roller Ball Hose Type Hydraulic 3/8" Lock-On Weight 134 Lbs. 106 Lbs. All materials must be thoroughly mixed before spraying. Sprayers are intended for spraying Form Release Agents, Water-based Sealants and Concrete Curing Compounds. Allen sprayers are not intended for spraying any types of asphalt sealants. Spraying of any type of asphalt sealers will cause damage to pump and will not be covered by warranty. FLEX-SHAFT AND BACKPACK VIBRATORS Available in electric or gasoline powered backpack models, these vibrators provide superior consolidation of concrete and feature interchangeable heads and shafts with our quick disconnect system. Electric: Lightweight model features high VPM in an easy-to-carry size. Includes shoulder strap. MODEL ELECTRIC GASOLINE Engine 115 Volt Grounded 4-cycle Vibrations per Minute 11,000-12,000 11,000-12,000 Flexible Shaft lengths 2-21 Ft Ft. Vibrator Heads Steel and Rubber Steel and Rubber Gasoline: Go anywhere backpack version features speed-up transmission, allowing engine to run at low RPM s and still produce high VPM s

9 RIDE-ON TROWELS MECHANICAL RIDE-ON TROWELS HHN31VTCSL5 Non Overlapping twin 48" 31-hp Vanguard gas Five blades per rotor, 91-inch path width. A 31-hp Vanguard 3 Cyl liquid cooled gasoline engine. Variable speed clutch. Helical gearbox operates at 98% efficiency. Twin-pitch control for simultaneous pitch control. JWN24HTCSL Non-Overlapping twin 36" GX670 Honda Smooth responsive patented steering assist makes this unit easy to control on any slab. Twin 36-inch non-overlapping rotors great for all stages of finishing from panning to sealing. Equipped with a GX670 Honda V-Twin gasoline engine and construction grade driveline that enables rotor speed ranges from rpm. HTO31VTCSL5 Overlapping twin 46" 31-hp Vanguard Powerful 31-hp Vanguard 3-cylinder liquidcooled gasoline engine meets the needs of the professional concrete contractor. Twin-overlapping rotors cover a path width of 88 inches wide using 5-blades per rotor. Heavy-duty worm-drive gearbox with large oil capacities and integral cooling fans to reduce heat buildup. Whiteman s patented TwinPitch control and steering assist come standard. HYDROSTATIC RIDE-ON TROWEL STX55Y6 Non-overlapping twin 60" 60-HP Yanmar Turbo Diesel Hydraulic trowel eliminates gearboxes, clutches Reliable, trouble-free design. Path width of 117 inches. Powered by a 60-hp Yanmar turbo diesel engine. Six blades per rotor. Rotor speeds up to 130 rpm. JWN24HTCSL STX55Y6 1 HHN31VTCSL5 Model Hydrostatic Series Twin 60" Non-Overlapping STX55Y6 Engine Yanmar Turbo Diesel Engine Cooling HP Blades per Rotor Rotor RPM Path Width In. (cm) Liquid (297) Fuel Tank Capacity gal. (ltr.) 11 (42) Run Time gal./hr. (ltr./hr.) 2.81 (10.93) L x W x H in. (cm) 125 x 65 x 57 (318 x 165 x 57) Operating Weight lbs. (kg) 2270 (1030) Wheel Kit EMR3 Mechanical Series Twin 48" Non-Overlapping HHN31VTCSL5 Vanguard Liquid (231) 4.4 (17) 2.51 (9.5) 95 x 48 x 46 (241 x 122 x 117) 1120 (508) EMR2 or EMR3* Twin 46" Overlapping HTO31VTCSL5 Vanguard Liquid (223.5) 5 (19) x 50 x 46 (236 x 127 x 117) 1052 (447.1) Twin 36" Non-Overlapping JWN24HTCSL Honda Air (191) *For current production units only. May not adapt to older models. 2.2 (8) 1.71 (6/47) 77 x 39 x 48 (196 x 99 x 122) 685 (209) EMR

10 TROWELS WALK-BEHIND TROWELS Improves productivity in confi ned areas or when working against walls, pipes and slab edges. The C-Series trowel features a rotating guard ring to reduce manual labor while edging. It enables the operator to finish within #/16" of obstructions. The high capacity gearbox delivers big machine performance in a small package. The J-Series incorporates amazing balance, improved serviceability, and your choice of a Standard or Quick-Pitch Handle, providing contractors with the ideal machine for residential and general construction work. The favorite trowel of the construction industry. These 46" (1170 mm) workhorses will handle the majority of your fi nishing requirements. The B-Series incorporates all of our latest improvements, amazing balance and control, and improved serviceability. The HD48 is designed for jobs that require high speed burnishing up to 180 RPM; with our HD gearbox and Comet CVT Drive system this trowel can fi nish a slab surface rapidly under any condition. B-Series C-Series J-Series Model HP (kw)* Motor Clutch RPM C-Series - 24-inch Rotating Guard Ring HD-Series Operating Weight lb. (kg) Handle Options (see side) CA4HC 3.5 (2.6) Honda Centrifugal (57) STHAC; QPHAFC J-Series - 36-inch Guard Ring J36H (3.6) Honda Centrifugal (68) SXH; QXH B-Series - 46-inch Guard Ring B46H90 8 (6.0) Honda Centrifugal (110) SXH; QXH HD Series - 48-inch Guard Ring HDA48413H 11.1 (8.2) Honda Variable Speed (143) SXHHD; QXHHD Trowel Handle Options STHAC Standard knob style pitch control for CA4HC (centrifugal clutch) model QPHAFC Folding Quick- Pitch control for CA4HC (centrifugal clutch) model SXH Standard knob style pitch control for M-, J- and B-Series trowels QXH Quick-Pitch style control for M-, J- and B-Series trowels SXHHD Standard knob style pitch control for HD-Series trowels with 2-inch diameter handle mount QXHHD Quick-Pitch style control for HD-Series trowels with 2-inch diameter handle mount

11 CONCRETE PUMPS LS-600 LS-400 C30HD LS-500 C30HD Small Line LS400 / LS500 Mid Range Remixer/agitator hopper standard. Engine Cover (hood) standard. Versatility handles low cement/sand mixes up to 1-1/2" aggregate. Easily removed hopper for quick maintenance. Infinite volume control. Extra heavy-duty main frame. Solid state Digital Control Panel. Reverse pumping for instant response and smoother operation. Hydraulic surge brakes. Exclusive full-flow shuttle-tube concrete valve more efficient operation. One-man operation simple controls. LS600 Concrete piston face pressure 1100 psi (69 bar). Engine Cover (hood) standard. Versatility handles low cement/sand mixes up to 1-1/2" aggregate. Remixer/agitator hopper standard. Easily removed hopper for quick maintenance. Infinitely variable volume control from 0 to 60 cubic yards per hour. Heavy-duty Deutz 99 HP diesel engine. True reverse pumping for instant response and smoother operation. Solid state Digital Control Panel. Exclusive full-flow shuttle-tube concrete valve more efficient operation. One-man operation simple controls. Powerful engines 68 HP Zenith gasoline or 32-HP Deutz diesel engines.smoothest running engines in the industry. Heavy-duty centrifugal clutch for longer life Central lubrication system enclosed lubrication box provides clean, positive piston lubrication. Remote controls hardwired 125 ft. cable or an optional wireless remote control. All steel engine cover (hood) rugged design resists abuse. Three-speed volume control enables the operator to control the flow. E-Z Open Manifold hinged for quick access to seats, cylinders and piston cups. Easy open reducer. Longer frame with fuel cell inside frame. Full featured highway light package. Standard with each C30HD: Elbow with heavy-duty raised ends; 3" x 2" Reducer with heavy-duty raised ends; Two 3" adjstable snap couplings. Control box features engine hour meter, temperature warning light, battery warning light. Options: Wireless remote control. Air or electric vibrators for hopper screen. Hydraulic rear outriggers. Options: Wireless remote control. Air or electric vibrators for hopper screen. Hydraulic rear outriggers. 1 MODEL C30HD LS400 LS500 LS600 PERFORMANCE Volume output - yds.3./hr. (m3/hr.)* 25 (19) 0 to 40 (0 to 30) 0 to 50 (0 to 38) 0 to 60 () to 46) Maximum aggregate size - in. (mm) 1/2" (12) 1-1/2 (38) 1-1/2 (38) 1-1/2 (38) Vertical pumping distance - ft. (m)* Excess of 150 (46) 300 (91) 300 (91) 300 (91) Horizontal pumping distance - ft. (m)* 500 (152) 1,000 (305) 1,000 (305) 1,000 (305) Maximum concrete pressure - PSI (bar)* 500 1,100 (76) 1,100 (76) 1,100 (76) ENGINE Engine, HP (kw) Deutz diesel F2L (22) or Deutz turbo diesel BF4L201F - Deutz turbo diesel BF4L201F - Deutz turbo diesel BF4L914F - Nissan A15-51 (38) 79 (59) 79 (59) 99.5 (74) Concrete cylinders - in. (mm) 6 x 12 6 x 36 (152 x 915) 6 x 36 (152 x 915) 6 x 36 (152 x 915) Hydraulic cylinders - in. (mm) 3 x 36 (76 x 915) 3 x 36 (76 x 915) 3 x 36 (76 x 915) Engine cover (hood) Standard Standard Standard Standard Hydraulic oil capacity - gal. (liter) 58 (219) 58 (219) 58 (219) Hydraulic oil cooler Standard, with fan Standard, with fan Standard, with fan Pump outlet - in. (mm) 3 (76) 5 (127) HD 5 (127) HD 5 (127) HD Pump Reciprocating piston Hopper remixer Standard Standard Standard Hopper height - in. (mm) 52 (1321) 42 (1067) 42 (1067) 42 (1067) Hopper capacity - cu. ft. (liter) 6 (.17m 3 ) 10 (283) 10 (283) 10 (283) Fuel tank capacity - gal. (liters) 40 (151) 40 (151) 40 (151) Brakes Hydraulic surge Hydraulic surge Hydraulic surge DIMENSIONS L x W x H - in. (cm) 144 x 59 x x 67 x x 67 x x 67 x 54 (366 x 149 x 164) (437 x 170 x 137) (437 x 170 x 137) (437 x 170 x 137) Weight without fuel - lb. (kg) 2,910 (1320) 4,760 (2159) 4,760 (2159) 5,190 (2354) * Pumping distances shown are to be used as a guideline only. Maximum attainable distances, maximum aggregate size and minimum slump are all dependent on the concrete mix design and pipeline diameter and other jobsite conditions. Maximum output and distances cannot be achieved simultaneously

12 TROWEL BLADES / FLOAT PANS ORIGINAL SILVER The Industry Standard Power Trowel Blade The Wagman Original Silver Blade was developed using ASW 80 CR2 Torque Flex Steel, the longest lasting proprietary alloy tool steel available. Wagman s heavy-duty construction makes it one of the most consistent wearing and longest lasting blades available. For use on walk-behind and ride-on power trowels. Silver polished blade gives maximum flex to ensure a smooth, chatter-free finish. Available in finish and combination blade types. Full line of float blades also available. Part # Blade Size Blade Type Blades per carton Wt. per Ctn. Lbs. WX-614F 6 x 14 Finish 4 11 WX x 14 Combination 4 14 WX-1014FO 10 x 14 Float 4 21 WX-618F 6 x 18 Finish 4 14 WX-818F 8 x 18 Finish (8" Flat Finish w/round Corners) 4 18 WX x 18 Combination 4 18 WX-1018HD 10 x 18 Float 4 30 GOLD PRO Pure Performance Blade for Ride-On Trowels The Wagman Gold Pro is a blade built tough to meet the punishing demands of ride-on power trowels or any other application where long lasting life is required. Construction from extra thick high-performance tool steel, the Gold Pro is the longest lasting steel blade available. Since the Gold Pro Blade is made from a heavier weight steel and tends to be a bit more stiff, Wagman suggests that the Gold Pro Blade be used primarily on riding trowel machines. High chrome and carbon content increases abrasion resistance. Field tested and proven to provide 25% to 50% longer life than most silver trowel blades. Available in finish and combo blade styles only. Part # Blade Size Blade Description Blades per Carton Wt. per Ctn. Lbs. WX-614 PRO 6 x 14 Finish 4 14 WX-618 PRO 6 x 18 Finish 4 18 WX-8180 PRO 8 x 18 Combination 4 22 PRO FLOAT PAN The Longest Lasting Pan for the Flattest Floors STRENGTH Float pan clips are mig welded on three sides ensuring maximum strength and preventing blades from jamming. PRECISION Precise dish and flange design prevents oil canning and keeps the pan from digging into the concrete. HIGH-PERFORMANCE Specialized float steel provides consistent wear for maximum performance. RM Item # Brand Description Size Number of blades WFP-24-E-4 Wagman Pro Float Pan Fits Terex, Bartell & Whiteman 2' 4 WFP-36-B-M-4 Wagman Pro Float Pan Fits Whiteman Rider 3' 4 WFP-36-M-4 Wagman Pro Float Pan Fits Wacker, Allen Rider 3' 4 WFP-45-M-4 Wagman Pro Float Pan Fits Whiteman, Allen Rider 4' 4 WFP-45-M-5 Wagman Pro Float Pan Fits Whiteman, Allen Rider 4' 5 WFP-46-M-4 Wagman Pro Float Pan Fits Wacker, Allen Rider 4' 4 WFP-46-M-5 Wagman Pro Float Pan Fits Wacker, Allen Rider 4' 5 WFP-60-M-6 Wagman Pro Float Pan Fits Whiteman Rider 5' 6 WFP-62-M-5 Wagman Pro Float Pan Fits Allen Rider 5'

13 CONCRETE SAWS Husqvarna Soff-Cut 150 / 150 D Applications: Ultra Early Entry concrete cutting system to reduce random cracking. (150) Designed for residential and light commercial applications such as driveways and parking lots. 150D is designed especially for the contractor who wants a no-hassle way to make decorative cuts. 150D 150 Benefits: Gasoline saw with easy pull start engine. Patented low-noise and low-dust blade block enclosure. Mechanical blade depth control. Non-marking and non-stick polyurethane wheels. Retractable front guide system.(150) Self-aligning guide wheels guarantee proper blade alignment with the saw joint every time.(150 D) Folding handle. Patented safety arbor. (150) High strength single piece frame. Integrated weight block maintains proper weight balance for a consistent cut. (150 D) Husqvarna Soff-Cut Applications: Ultra Early Entry concrete cutting system to reduce random cracking. Handheld electric saw designed for finish cuts, scoring and decorative applications. Benefits: Low-noise and low-dust blade block enclosure with dust extraction port. 12 amp 120 volt electric motor. Adjustable blade depth control 1/4" - 1" (6-25mm). Retractable front guide system. Rear guide. Curvilinear scoring at 2 ft. (.6m) minimum radius at 1/2" (13mm) depth. Chase existing curvilinear saw cuts with 5 ft. (1.5m) minimum radius using ProEdge beveled blades. Patented safety arbor. Adjustable motor position for operator comfort. Cuts to < 1" (25mm) from the wall. Paddle switch allows multiple hand positions to ease operator fatigue. Spring retractable guide system. Product Specifications Soff-Cut 150 / Soff-Cut 150 D Soff-Cut 50 Item no / Maximum blade diameter, in. (mm) 6 (152) 5 (127) Maximum depth of cut, in. (mm) 1-3/16 (30) 1 (25.4) Maximum power, hp* 4.3 Average bladeshaft, rpm 3,800 11,000 Blade flanges, in. (mm) 3 (76) 1.5 (38.1) Power source Gasoline Electric 120/12 Arbor Triangular Triangular Bladeshaft diameter, in. (mm) 3/4 (19).67 (17) Displacement, cu. in. (l) 7.69 (126) Bore/stroke, in. (mm) 2.9 (58)/1.9 (48) Cylinders/cycle 1/4 Fuel capacity, gal. (l) 0.7 (2.7) Oil capacity, qt. (l) 0.63 (0.60) Air filter Dry type dual element with pre-cleaner Starter Recoil Engine cooling Air Axle front/rear, in. (mm) 3/4 (19)/3/4 (19) Wheels front, in. (mm) 3 x 3 (76 x 76 ); 1 each Wheels rear, in. (mm) 3 x 3 (76 x 76 ); 2 each Handlebar adjustment Fixed Fixed Blade guard type Enclosed Enclosed Number of belts 1 Blade depth control Manual Manual Engine manufacturer Robin Engine specifications EX13 Maximum weight uncrated, lbs. (kg) 87 (39) / 102 (46) 9 (4) Maximum weight crated, lbs. (kg) 91 (41) / 108 (49) 9-1/2 (4.3) Dimensions uncrated, in. (mm) LxWxH 68 x 19 x 33-1/2 (1,727 x 483 x 851) 22 x 10 x 9-1/2 (559 x 254 x 241) *As rated by the engine manufacturer

14 CONCRETE SAWS Husqvarna Soff-Cut 750 / 2000 / Applications: Ultra Early Entry concrete cutting system to reduce random cracking. Soff-Cut 750 is ideal for light to medium-duty usage on commercial and industrial applications. Designed for heavy-duty usage on highways, runways, commercial and paving applications. (2000, 4000) Three blade widths can be used, allowing different joint widths and crack control simultaneously. (2000, 4000) Benefits: Self-propelled gasoline saw with hydrostatic transmission. Patented low-noise and low-dust blade block enclosure. Mechanical blade depth control. (750) Electric blade depth control. (4000) High strength single piece frame. (750) Center lifting handle. Distinctive roll cage style framework. Easy pull start engine. (750) Electronic key start. (4000) Electronic remote key start and choke. (2000) Patented dry-cut diamond blade, anti-ravel skid plate and safety arbor. Product Specifications Soff-Cut 2000 Soff-Cut 4000 Soff-Cut 750 Item no Maximum blade diameter, in. (mm) 10 (254) 13-1/2 (343) 8 (203) Maximum depth of cut, in. (mm) 1-1/2 (38) 3 (76) 1-3/16 (30) Maximum power, hp* Average bladeshaft, rpm 3,600 3,500 3,800 Blade flanges, in. (mm) 4-1/4 (108) 5-7/8 (150) 4-1/4 (108) Power source Gasoline Gasoline Gasoline Arbor Triangular Triangular Triangular Bladeshaft diameter, in. (mm) 1-1/4 (32) 1-1/2 (38) 1-1/4 (32) Displacement, cu. in. (l) 16.2 (265) 39.1 (640) 10.3 (169) Bore/stroke, in. (mm) 2.9 (75)/2.3 (60) 3.0 (77)/2.6 (67) 2.6 (66)/1.8 (46) Cylinders/cycle 1/4 2/4 1/4 Fuel capacity, gal. (l) 1.59 (6.0) 4.34 (16.4) 0.95 (3.6) Oil capacity, qt. (l) 1.05 (1.0) 2 (1.9) 0.63 (0.60) Air filter Dry type dual element with pre-cleaner Heavy-duty canister Dry type dual element with pre-cleaner Starter Electric Electric Recoil Engine cooling Air Air Air Axle front/rear, in. (mm) 1 (25.4)/1 (25.4) 1 (25.4)/1 (25.4) 1 (25.4)/1 (25.4) Wheels front, in. (mm) 4 x 4 (102 x 102); 2 each 4 x 4 (102 x 102); 2 each 4 x 4 (102 x 102); 2 each Wheels rear, in. (mm) 10 x 3-5/8 (254 x 92); 1 each 10 x 3-5/8 (254 x 92); 1 each 8 x 2-3/16 (203 x 74); 1 each Handlebar adjustment Fixed Fixed Fixed Blade guard type Enclosed Enclosed Enclosed Number of belts 2 (1 each banded 3VX) 3 (1 each banded 3VX) 2 (1 each banded 3VX) Blade depth control Manual Electric Manual Engine manufacturer Robin Kohler Robin Engine specifications EX27 CH20 EX17 Maximum weight uncrated, lbs. (kg) 420 (191) 420 (191) 243 (110) Maximum weight crated, lbs. (kg) 518 (235) 518 (235) 293 (133) Dimensions uncrated, in. (mm) L x W x H 94 x 29 x 34 (2,388 x 737 x 864) 94 x 29x 34 (2,388 x 737 x 864) 67 x 19 x 38 (1,712 x 485 x 970) *As rated by the engine manufacturer

15 CONCRETE SAWS Husqvarna Soff-Cut 390 Husqvarna Soff-Cut 450 Applications: Ultra Early Entry concrete cutting system to reduce random cracking. Electric saw designed for residential and light commercial applications. Benefits: Accessible mechanical on/off safety switch. Aggregate adjustment system. Hour meter. 110 volt, 15 amp electric motor. Spring retractable guide system. Patented anti-ravel skid plate and safety arbor. Product specifications. Soff-Cut 390 Item no Maximum blade diameter, in. (mm) 5-1/2 (140) Maximum depth of cut, in. (mm) 1-1/8 (29) Average bladeshaft, rpm 5,800 Voltage/amps 110/15 Blade flanges, in. (mm) 1.5 (38.1) Power source Electric Arbor Triangular Bladeshaft diameter, in. (mm).67 (17) Wheels front, in. (mm) 2-1/2 (64); 1 each Wheels rear, in. (mm) 2-3/4 (70); 2 each Handlebar adjustment Additional extensions Blade guard type Enclosed Blade depth control Manual Maximum weight uncrated, lbs. (kg) 27 (12) Maximum weight crated, lbs. (kg) 74 (34) Dimensions uncrated, in. (mm) L x W x H 44-1/4 x 15 x 11-1/2 (1,124 x 381 x 292) 1 Applications: Ultra Early Entry concrete cutting system to reduce random cracking. Designed for light to medium-duty usage on driveways, parking lots and residential applications. Benefits: Mechanical remote engine throttle control. Flat folding handle. Remote engine choke control and engine shut-off switch. Easy pull start engine. Mechanical remote retractable guide arm. Patented dry-cut diamond blade, anti-ravel skid plate and safety arbor. Patented low-noise and low-dust blade block enclosure. Product Specifications. Soff-Cut 450 Item no Maximum blade diameter, in. (mm) 8 (203) Maximum depth of cut, in. (mm) 1-3/16 (30) Maximum power, hp* 5.7 Average bladeshaft, rpm 3,800 Blade flanges, in. (mm) 3-3/4 (95) Power source Gasoline Arbor Triangular Bladeshaft diameter, in. (mm) 1 (25) Displacement, cu. in. (l) 10.3 (169) Bore/stroke, in. (mm) 2.6 (66)/1.8 (46) Cylinders/cycle 1/4 Fuel capacity, gal. (l) 0.95 (3.6) Oil capacity, qt. (l) 0.63 (0.60) Air filter Dry type dual element with pre-cleaner Starter Recoil Engine cooling Air Axle front/rear, in. (mm) 3/4 (19)/1 (25.4) Wheels front, in. (mm) 3 x 3 (76 x 76); 2 each Wheels rear, in. (mm) 8 x 3 (203 x 76); 2 each Handlebar adjustment 2 Position Blade guard type Enclosed Number of belts 2 (1 each 2 band 3VX) Blade depth control Manual Engine manufacturer Robin Engine specifications EX17 Maximum weight uncrated, lbs. (kg) 143 (65) Maximum weight crated, lbs. (kg) 265 (120) Dimensions uncrated, in. (mm) L x W x H 60 x 18-3/4 x 38-1/2 (1,524 x 476 x 978) *As reted by the engine manufacturer

16 CONCRETE SAWS Husqvarna Soff-Cut 2500 / 4200 / 5000 Applications: Ultra Early Entry concrete cutting system to reduce random cracking. Ideal for medium to heavy-duty usage on highways, runways, commercial, industrial and paving applications. Multiple blade widths can be used, allowing different joint widths and crack control simultaneously. Benefits: Self-propelled gasoline saw with positraction drive, hydrostatic transmission and travel speed indicator. Switch-activated electronic adjustable handle. (2500, 4200) Master switch control panel. (2500, 4200) Electronic remote key start and choke. High-strength, lightweight aluminum frame. 10 amp (2500), 20 amp (4200), 15 amp (5000) regulated charging systems. Switch-activated blade depth control and retractable guide. Mechanical depth gauge. (4200, 5000) Patented dry-cut diamond blade, anti-ravel skid plate and safety arbor. Patented low-noise and low-dust blade block enclosure Product Specifications Soff-Cut 2500 Soff-Cut 4200 Soff-Cut 5000 Item no Maximum blade diameter, in. (mm) 10 (254) 13-1/2 (343) 14 (350) Maximum depth of cut, in. (mm) 1-1/2 (38) 3 (76) 4 (100) Net power, hp* Average bladeshaft, rpm 3,200 3,500 2,900 Blade flanges, in. (mm) 4-1/4 (108) 5-7/8 (150) 4-3/4 (120) Power source Gasoline Gasoline Gasoline Arbor Triangular Triangular Triangular Bladeshaft diameter, in. (mm) 1-1/4 (32) 1-1/2 (38) 1-1/2 (38) Displacement, cu. in. (l) 23.7 (389) 41.1 (674) 44 (725) Bore/stroke, in. (mm) 3.5 (88) 3.2 (80)/2.6 (67) 3.3 (83)/2.6 (67) Cylinders/cycle 1/4 2/4 2/4 Fuel capacity, gal. (l) 1.6 (6.1) 3.16 (12) 3.16 (12) Oil capacity, qt. (l) 2.3 (1.1) 2 (1.9) 2 (1.9) Air filter Dry type dual element Heavy-duty canister Heavy-duty canister Starter Electric Electric Electric Engine cooling Air Air Air Axle front/rear, in. (mm) 3/4 (19)/1 (25.4) 1 (25.4)/1 (25.4) 1 (25.4)/1 (25.4) Wheels front, in. (mm) 4 x 3 (102 x 76); 2 ea. 4 x 4 (102 x 102); 2 ea./4 x 2 (102 x 51); 1 ea. 4 x 4 (102 x 102); 2 ea./4 x 2 (102 x 51); 1 ea. Wheels rear, in. (mm) 8 x 3 (203 x 76); 2 ea. 11 x 4 (279 x 102); 2 ea. 11 x 4 (279 x 102); 2 ea. Handlebar adjustment Electric Electric Electric Blade guard type Enclosed Enclosed Enclosed Number of belts 2 (1 each 2 band 3VX) 3 (1 each 3 band 3VX) 4 (1 each 4 band 3VX) Blade depth control Electric Electric Electric Engine manufacturer Honda Kohler Kohler Engine specifications GX390 CH23 CH740 Maximum weight uncrated, lbs. (kg) 347 (157) 488 (221) 495 (225) Maximum weight crated, lbs. (kg) 418 (190) 568 (258) 593 (269) Dimensions uncrated, in. (mm) L x W x H 76 x 23 x 36 (1,930 x 584 x 914) 89 x 30 x 40-1/4 (2,261 x 762 x 1,022) 95 x 30-1/2 x 41 (2,413 x 775 x 1,041) *As rated by the engine manufacturer

17 CONCRETE SAW BLADES JOINT PROFILE BLADES The Husqvarna ProEdge joint profile blades feature a unique triangular safety arbor configuration. The V-Line and Radius Line blades bevel the cut, allowing for straighter joint lines, higher production and reduced labor versus hand tooling. These blades are ideal for residential and commercial applications, including driveways, sidewalks, hardscape, patios, pool decks, parking garages and commercial sitework. With the Soff-Cut system, the ProEdge blades and model 390, 50, 150 and 150 D saws can be used to chase standard joints for a beveled look the day after early entry dry-cut control joints are cut. Pro-Edge Beveled Blades Chases existing standard saw cuts to bevel edges on 45 angle or round corners to 1/4" or 1/2" radius. Use these decorative Soff-Cut Pro-Edge beveled blades to achieve a Tooled Joint look. 150/150D Saws XL6-V21 XL6-V23 XL6-V25 XL6-V38 XL6-V500 XL6-R250 XL6-R & 50 Saws XL5-V21 XL5-V25 XL5-V23 XL5-R250 XL5-R500 1 DIAMOND BLADES FOR ULTRA EARLY ENTRY SAWS Husqvarna Soff-Cut Excel Series Blades Husqvarna Soff-Cut color coded diamond blades and patented skid plates are designed and tested to meet all aggregate conditions. The blades are top quality and designed to work specifically with the Soff-Cut system, the only true Ultra Early Entry system. The Excel 1000 Series Purple is recommended for ultra hard aggregate, non-abrasive sand. The Excel 2000 Series Green is recommended for hard aggregate, non-abrasive sand. The Excel 3000 Series Red is recommended for medium to hard aggregate, medium abrasive sand The Excel 4000 Series Orange is recommended for medium aggregate, medium abrasive sand. The Excel 5000 Series Yellow is recommended for medium to soft aggregate, abrasive sand. The Excel 6000 Series Black is recommended for soft aggregate, abrasive sand. The Excel Turbo is recommended for soft aggregate, soft manufactured sand (limestone). Husqvarna Score Cutting Blade for 150 Saw. Score cuts 1/2" deep (maximum) in cured concrete a-10 23

18 SURFACE PREPARATION METAL BOND DIAMOND TOOLS Metal bond tools are used in the initial grinding and polishing stages. The Husqvarna metal bond diamond selection offers a wide choice of bonds and grit sizes, all with the choice of double or single segments to suit the application and budget of the end user. The Husqvarna Redi Lock system eliminates the need for multiple sets of diamond holder discs for different sets of diamond tooling. It removes the necessity for the more time consuming and impractical screw-on-diamond systems as segments simply lock into the slots and are ready for use. The system is available for a variety of machine manufacturers. Switch entire sets of diamonds instantly. Premium-quality resin-bond polishing pads can be chosen for high-end polishing, with a grit range from 50 to Husqvarna resin pads are easy to attach to the PG machinery range with a simple Velcro system and are also available for handheld machinery. Husqvarna PG 530 TECHNICAL SPECIFICATIONS Power output 5 hp Rated current 16A Voltage V Phases 1, 3 Grinding width 21" Weight 475 lbs. PG 680 PG 530 Husqvarna PG 680 TECHNICAL SPECIFICATIONS Power output 17 hp Rated current 32 A Voltage 380 / 480 V Phases 3 Grinding width 27" Weight 850 lbs. Husqvarna DC 3300 TECHNICAL SPECIFICATIONS Power output 4 hp Rated current 16A Voltage 220 / 240 V Phases 1 Air Flow 325 cfm Max. vacuum 4.35 psi Weight 214 lbs. Husqvarna DC 5500 TECHNICAL SPECIFICATIONS Power output 7.4 hp Voltage 380 / 480V Rated current 32A Air Flow 350 cfm Max. Vacuum 4.35 psi Weight 474 lbs. DC 3300 Husqvarna PG 820 TECHNICAL SPECIFICATIONS Power output 17 hp Rated current 32 A Voltage 380 / 480 V Phases 3 Grinding width 32" Weight 970 lbs. PG 820 DC

19 SAW / SCARIFIER 8" WALK BEHIND SCARIFIER 14" MASONRY SAWS PRODUCTION RATE: 8" Working Width will scarify approximately Sq. ft. per hour at Depth Per Pass of 1/8" Removes traffic lines at 800-1,000 lineal ft. per hour PRODUCT NOTES: - Optional edger attachment allows the CPM-8 to get within 1-3/4" of any vertical surface IDEAL FOR: - Sidewalk trip hazard repair - Concrete and coatings removal - Floor cleaning and/ or preparation - Traffic line and markings removal - Creating non-slip surfaces Numerous Cutter Drum setups are available including Diamond Blade Grooving setups to achieve various surface profiles. PRODUCT NOTES: - 14" blade capacity - Adjustable cutting head can be used manually or locked in a fixed position - Gasoline units have a large capacity, 3-stage filter that protects the engine from wear - Electric BB-14 unit has a totally enclosed fan-cooled motor - Gasoline units include a belt driven connectable and disconnectable water pump - Electric BB-14 unit includes a 115V submersible water pump with a water proof switch IDEAL FOR: - Professional masons, paver installers, paver manufacturers, landscape suppliers, masonry suppliers and rental stores BB-14E BB-14G 1 10" SELF-PROPELLED SCARIFIER 18" DOWNCUT - CONCRETE & ASPHALT SAWS PRODUCTION RATE: 10" working width will scarify approximately Sq. ft. per hour at Depth Per Pass of 1/8" PRODUCT NOTES: - Upcut drum rotation - Optional Outrigger Axle Assembly enables the machine to follow slab contours closely when working on uneven surfaces or when uniform surface removal is critical - Hydrostatic drive transmission provides a smooth forward and reverse speed control IDEAL FOR: - Parking deck and road repairs - Factory floor cleaning and/or preparation - Mall floor repairs SPECIALTY SET-UPS: - Convertible hood design on CPU-10FC model allows for multiple drum set-ups and provides easy access for quick drum changes PRODUCT NOTES: - Wide T handles with rubber grips - Heavy-duty arbor shaft assembly with 18" blade capacity - Heavy-duty, 7-gauge steel frame and undercarriage eliminates bending and vibration - Dual blade arbor cutting capabilities - Easy turn, large diameter crank for lowering and raising blade in and out of cut - Turn-to-lock throttle cable - Solid-steel handles and lifting bail for easy loading and unloading - Heavy-duty, anti-vibration engine mount - Screw boot belt tensioner prevents frame damage IDEAL FOR: - Short-run slab cutting, contraction joints, patch repairs in asphalt, traffic loop installation and trenching

20 GRINDERS / ACCESSORIES 7" TURBO GRINDER PRODUCTION RATE: 7" Working Width will grind approximately Lineal ft. per hour at 1/16" with an EDCO Diamond Cup Wheel INCLUDES: 1 7" Diamond Cup Wheel and Standard Vacuum Port REQUIRES: 1 7" Diamond Cup Wheel OPTIONAL: 1 7" Scarifier Assembly with Solid Carbide Cutters* (*Must have rigid head assembly to use this accessory) FLEX HEAD ASSEMBLY IS IDEAL FOR: - Grinding tightly against any vertical surface - Grind around columns or under tanks and other tight areas - Removing coatings, build-ups, markings overlays or paints RIGID HEAD ASSEMBLY IS IDEAL FOR: - Grinding uneven expansion joints, high spots, bridge decks or removing coatings in small areas - Grinding curbs and gutters for proper flow trenching - Removing coatings, build-ups, markings overlays or paints The TMC-7, TURBO EDGE GRINDER comes standard with a flex head assembly. An optional rigid head assembly is available. 10" TURBO GRINDER PRODUCTION RATE: 10" Working Width will grind approximately Sq. ft. per hour at 1/16" with an EDCO Diamond Disc INCLUDES: 1 10" Diamond Disc and Standard Vacuum Port REQUIRES: 1 10" Diamond Disc RIGID HEAD ASSEMBLY IS IDEAL FOR: - Grinding uneven expansion joints, high spots, joint curls and bridge decks - Removing coatings - Grinding rough concrete surfaces FLEX HEAD ASSEMBLY IS IDEAL FOR: - Preparing a smooth, flat floor to receive a new coating - Removing coatings - Grinding rough concrete surfaces - Grinding surfaces 4 times faster than a traditional floor grinder The TG-10, TURBO GRINDER, comes standard with a rigid head assembly 10" DIAMOND DISCS 7" TURBO GRINDER ACCESSORIES 7" DIAMOND CUP WHEELS DESCRIPTION: 17 SegmentT, dry cut grinding wheel GRIT PART# GRIT PART# Cup wheels can be used with the rigid head or flex head assembly on EDCO S TMC-7. 7" SCARIFIER ASSEMBLY DESCRIPTION: Solid, 15-point carbide cutter disc assembly PART# Scarifier assembly discs can only be used with the rigid head assembly on EDCO S TMC-7 GENERAL PURPOSE DISC PART #19166 General Purpose Concrete Medium Bond (7 MATRIX) GRIT ABRASIVE DISC PART #19165 Green Concrete Hard Bond (9 MATRIX) GRIT GENERAL PURPOSE/ABRASIVE DISC PART #19161 Green/General Purpose Concrete Medium-Hard Bond (7 MATRIX) GRIT OTHER DIAMOND DISCS AVAILABLE Soft Bond-Orange Disc GRIT DISC: PART # Fine & Very Fine Discs 80 GRIT DISC: PART # GRIT DISC: PART #19163 DUAL-DISC GRINDER PRODUCTION RATE: 22" Working Width will grind approximately Sq. ft. per hour at 1/32" with EDCO Dyma-Serts INCLUDES: 2 Multi-Accessory Disc, 2" Vacuum Port & Water Port Electric models have a 115/230 Voltage Selector Switch REQUIRES: 6 Grinding Insert Accessories per loading IDEAL FOR: - Smoothing concrete in large and small areas - Light grinding or cleaning of concrete surfaces - Removing mastics, thin-set, sealers, epoxies and urethanes DYMA-SERTS Dyma-Serts are diamond segments welded to a backing plate to improve grinding speed and remove tough coatings. PRODUCTION RATE: 5 Times faster than grinding stones. Long lasting up to 30,000 sq. ft. (2,800 square meters) of grinding action IDEAL FOR: - Smoothing rough surfaces or trowel marks - Grinding concrete or Terrazzo - Repairing damaged concrete slabs - Removing epoxy thin-coats - Grinding sharp aggregates such as flint and granite - Removing surface imperfections from epoxy mortars - Removing thin mastics and thin-set - Leveling and smoothing uneven surfaces For Concrete EG-1, XGeneral Purpose Part #19110 EG-2X, Abrasive Concrete Part #19130 EG-3X, Epoxy Mortars Part #19180 For Terrazzo EG-5X, 50 grit Part #19250 EG-7X, 80 grit Part #19260 EG-9X, 120 grit Part #

21 CONCRETE / MORTAR MIXERS Mortar mixers for the professional! Choose from steel or EasyClean polyethylene drums.you choose. Available in 7, 9, and 12 cubic foot capacities, with your choice of power and drum materials. 12 cu. ft. HYDRAULIC DRIVE... Mixes larger, stiffer loads smooth and consistent. Eliminates high wear components, V-belts, gears and clutches. Hydraulic dump system allows high production with minimal operator fatigue (optional). Greatly reduced maintenance. Dual controls mixing blades and optional hydraulic dump. Rugged 14 gauge steel engine covers with punched ventilation openings for increase cooling and added strength. Built-in hydraulic safety relief system immediately disengages itself in case an object becomes wedged in the drum. Automatically resets when problem is corrected. Seal system double-sealed bearings with spring-loaded greasable shaft seals (on hydraulic mixers only). WM90P (9 cu. ft. Poly drum) 12 cu. ft. MECHANICAL DRIVE... Ideal for high production. Reduced maintenance hardened drive gear and multiple disc clutch are immersed in oil and fully protected for long, trouble-free life. Elimination of high-wear components V-belts, pulleys, and external gears. Easily accessible blade engagement lever. 1 EM70S (7 cu. ft.) WM94P (9 cu. ft.) The ultimate in heavy-duty concrete mixers. WM94S (9 cu. ft.) Available in 4-, 6- and 9-cubic foot capacities, with your choice of power and drum materials.* * Whiteman 4-cubic foot models available with steel drums only. 7 cu. ft. 9 cu. ft. 12 cu. ft. 12 cu. ft. 4 cu. ft. 6 cu. ft. 9 cu. ft. Plaster/Mortar Steel Drum Models Concrete Mixers Steel Drum Whiteman WM70S WM90S WM120SM (mechanical) WM120SH (hydraulic) MC44S MC64S MC94S Essick EM70S EM90S EM120SM (mechanical) Plaster/Mortar Poly Drum Models Concrete Mixers Poly Drum Whiteman WM70S WM90S WM120SM (mechanical) WM120SH (hydraulic) MC64P MC94P Essick EM70S EM90S EM120SM (mechanical)

22 MASONRY SAW Guardmatic MS 510 and MS 510 G Applications: Large jobs for cutting block, brick or pavers. Benefits: Now available with 9 hp Subaru and 11 hp Honda engine. High torque, continuous duty dual capacitor motors make efficient use of horsepower and reduce cutting time. New repaceable guide rails make alignment of the cart easier. Capable of cutting 8" x 8" x 16" block in one pass with a 20" blade. Only two pivot points for reduced saw maintenance and longer diamond blade life. Height can be controlled with a convenient crank control or foot pedal. The Sta-level blade guard keeps parallel to the cutting table for accurate cuts. Clutch available on 11 hp Honda model so blade does not spin while idling. Accessories Blade sold separately. DESCRIPTION Item No. Wheel-around kit Rip guide Conveyor cart wheel kit For electric guardmatic models only. Includes handles and drop-down wheels. TECHNICAL SPECIFICATIONS MS 510 MS 510 MS 510 MS 510 MS 510 MS 510 G MS 510 G Item no. Item no (230V-3P) (460V-3P) Item no. with clutch Blade diameter - in. (mm) 14 (350) 14 (350) 20 (508) 20 (508) 20 (508) 20 (508) 20 (508) Bladeshaft rpm 3,090 3,090 2,317 2,317 2,317 3,500 2,202 Maximum depth of cut - in. (mm) 5 (127) 5 (127) 8 (203) 8 (203) 8 (203) 8 (203) 8 (203) Arbor size - in. (mm) 1 (25.4) 1 (25.4) 1 (25.4) 1 (25.4) 1 (25.4) 1 (25.4) 1 (25.4) Bladeshaft bearings Ball bearings Ball bearings Ball bearings Ball bearings Ball bearings Ball bearings Ball bearings Number of belts 2 V-belts 2 V-belts 2 V-belts 2 V-belts 3 V-belts 3 V-belts 3 V-belts Blade guard type, Sta-Level One-piece steel One-piece steel One-piece steel One-piece steel One-piece steel One-piece steel One-piece steel Conveyor cart Cast aluminum Cast aluminum Cast aluminum Cast aluminum Cast aluminum Cast aluminum Cast aluminum Water pump, high output Submersible Submersible Submersible Submersible Submersible Belt driven Belt driven Weight - lbs. (kg) crated 360 (161) 361 (162) 360 (161) 361 (162) 368 (165) 495 (222) 495 (222) uncrated 332 (149) 333 (150) 332 (149) 333 (150) 395 (177) 368 (165) 368 (165) Power source Electric Electric Electric Electric Electric Gasoline Gasoline Motor/engine Baldor Baldor Baldor Baldor Baldor Honda Honda Specifications T.E.F.C T.E.F.C T.E.F.C T.E.F.C T.E.F.C EX27X GX390 Net horsepower* / Voltage 208/ / / / /460 Cycle/current/phase 60/AC/1 60/AC/1 60/AC/1 60/AC/1 60/AC/3 Full load amps 14.5/ / / / /9.7 Starting amps 188/95 149/ /95 149/ /83 Starter Capacitor Capacitor Capacitor Capacitor Capacitor Recoil Recoil Engine cooling Air Air Air Air Air Air Air Displacement - cu. in. (l) 16.5 (270) 23.7 (389) Bore - in. (mm) 3.0 (77) 3.5 (88) Stroke - in. (mm) 2.3 (58) 2.5 (64) Cylinders/stroke 1/4 1/4 Fuel capacity - gal. (l) 1.4 (5.3) 1.6 (6.1) Oil capacity - qt. (l) 1.2 (1.1) 1.2 (1.1) Air Filter Dual Element Cyclone *As rated by the engine manufacturer

23 MASONRY SAW Portasaw MS 355 and MS 355 G Applications: Smaller jobs for cutting brick, block or pavers. Benefits: New replaceable rails make alignment of cart easier. New design has wider opening in back to allow larger material to pass through. Saw head comes preassembled to frame. High torque continuous duty 110 or 220 volt electric motors, a 4.8 hp Honda gas engine or the new 4.5 hp Subaru gas engine provide high power and long life. Only two pivot points for reduced saw maintenance and longer diamond blade life. Plunge cut or lock the head and use with the rolling cart. The optional foot pedal kit reduces operator fatigue when plunge cutting. Sta-level bladeguard keeps parallel to the cutting table for accurate cuts. The side handles make moving the saw easier. Pivot lock bar moved to front for convenient raise/lower operation of blade. 1 Blade and stand sold separately. Accessories and Spare Parts DESCRIPTION Item No. Folding stand Skid kit Foot pedal kit Adapter cord - 20A twist to 15A straight Handle carrying kit for all older Portasaw models Conveyor cart complete, gas Conveyor cart complete, electric Rip guide Conveyor cart wheel kit TECHNICAL SPECIFICATIONS MS 355 MS 355 MS 355 MS 355 MS 355 G MS 355 G Item no Blade guard capacity - in. (mm) 14 (350) 14 (350) 14 (350) 14 (350) 14 (350) 14 (350) Bladeshaft rpm 2,150 2,509 2,509 2,509 3,800 2,950 Maximum depth of cut - in. (mm) 5 (127) 5 (127) 5 (127) 5 (127) 5 (127) 5 (127) Arbor size - in. (mm) 1 (25.4) 1 (25.4) 1 (25.4) 1 (25.4) 1 (25.4) 1 (25.4) Bladeshaft bearings Ball bearings Ball bearings Ball bearings Ball bearings Ball bearings Ball bearings Number of belts 2 V-belts 2 V-belts 2 V-belts 2 V-belts 2 V-belts 2 V-belts Blade guard type, Sta-Level One-piece steel One-piece steel One-piece steel One-piece steel One-piece steel One-piece steel Conveyor cart Cast aluminum Cast aluminum Cast aluminum Cast aluminum Cast aluminum Cast aluminum Water pump high output Submersible Submersible Submersible Submersible Belt driven Belt driven Weight - lbs. (kg) crated 171 (77) 171 (77) 182 (82) 191 (86) 209 (95) 209 (95) uncrated 160 (72) 160 (72) 169 (76) 181 (81) 198 (91) 198 (91) Power source Electric Electric Electric Electric Gasoline Gasoline Motor/engine Baldor Baldor Baldor Baldor Robin Honda Engine Specifications T.E.F.C T.E.F.C T.E.F.C T.E.F.C EX13 GX160 Net horsepower* 1-1/2 1-1/ Voltage / / Cycle/current/phase 60/AC/1 60/AC/1 60/AC/1 60/AC/1 Full load amps / / /3 Starting amps 79@115V 92@115V 63@230V 95@230V Starter Capacitor Capacitor Capacitor Capacitor Recoil Recoil Engine cooling Air Air Air Air Air Air Air filter Dual element Cyclonic *As rated by the engine manufacturer

24 HOISTS RGC PRO Platform Hoists An RGC Platform Hoist is the most economical, safe and dependable way to raise materials to the roof on residential and commercial job sites. They are available in 200 lb. and 400 lb. lifting capacities, with gas or electric power drives, and 12 ft., 16 ft., 28 ft. or 44 ft. of track. FEATURES AND BENEFITS: Easy transporting and no lifting required to mount the PRO Power Drive on track saves set up time and man power. Dual anchor points on 2nd and 3rd track cross ties with PRO Drive add to stability of system. Single handle control provides convenient, safe operation away from the load with minimal operator effort on the PRO Drive. Sturdy steel frame around the PRO Drive protects it. 33% larger cable drum diameter promotes longer wire rope life on the PRO Drive. The Classic Power Drive is ideal for use on steeper landscapes because it mounts higher on the track. Dual anchor points on 3rd and 5th track cross ties with the Classic Drive add to stability of system. Dual handle controls provide convenient, safe operation away from the load with minimal operator effort on Classic Drives. Brake rope design allows safe, controlled platform descent without binding due to metal-to-metal contact as with band style braking systems. Location of controls keeps the operator safely to side of load, not under it. PRO and Classic Drives are available with a 4 hp Briggs & Stratton, 4 hp Honda or 1.5 hp Baldor motor. Pulleys with polymer sheaves prolong wire rope life and permit smooth platform movement. Quick and easy assembly without any special tools. Large, open platform with removable rollers on all models for exceptional versatility. Durable, long-lasting steel guide rollers on platform main frame contact track and provide exceptional wear resistance. Heavy cast aluminum shoes on base track section help stabilize hoist on both pavement and dirt with full 16 sq. in. contact area. Base track sections have cross tie support brackets that add rigidity and extra stability to system. Platform Hoist Specifications Model Load Capacity 400 lbs. 200 lbs. Lift Speed 110 fpm 220 fpm Platform Size 24 in x 24 in. 17 in. x 18 in. Track ( 3-3/4 in. Side Rail) 24 in. wide 17 in. wide PRO POWER DRIVES PRO DRIVE w/ 4 hp B&S Gas Engine PRO DRIVE w/ 4 hp Honda Gas Engine PRO DRIVE w/ 1-1/2 hp Baldor Electric Motor CLASSIC POWER DRIVES CLASSIC DRIVE w/ 4 hp B&S Gas Engine CLASSIC DRIVE w/ 4 hp Honda Gas Engine CLASSIC DRIVE w/ 1-1/2 hp Baldor Electric Motor. PRO DRIVES Wheels make PRO DRIVE transportation and assembly to the track almost effortless. The single control lever requires minimal operator effort, improves productivity and makes the hoist safe and easy to use. A large cable drum and polymer sheave in the pulleys improve wire rope life. The brake rope design allows for feathering of the brake, resulting in smooth, controlled platform decent. CLASSIC DRIVES The CLASSIC DRIVE mounts to the 3rd and 5th track cross ties for convenient use on steep landscapes. The brake rope design allows for feathering of the brake, resulting in smooth, controlled platform decent. The drive is easy to operate with minimal operator effort

25 CONCRETE VIBRATOR / ACCESSORIES SURE SPEED New Electric Square Head Concrete Vibrator Energy efficient system. One motor drives any combination of shaft and head size. Uniform speed system one vibrator performs in multiple mixes. Ergonomic hand grip and adjustable shoulder strap. Lightweight yet powerful. ELECTRIC SQUARE HEAD CONCRETE VIBRATOR Deliver more torque with less amps than other motors. Retain speed under heavier loads. Allow the use of longer flexible shaft and larger vibrator heads. Operate at less than 65% of full load capacity under normal job conditions. Provide 20-50% faster consolidation. SQUARE HEAD CONCRETE VIBRATOR HEADS Provides 22% more displacement than round heads. More effective in low-slump concrete than round heads. One-piece head housing with no threaded tip joint to wear through. Hardened Square housing has more metal to protect against wear. The Square Head comes in six standard head sizes: 13/16", 1",1-3/8",1-3/4", 2" and 2-1/4". Optional polyurethane heads are also available. SQUARE HEAD BACKPACK CONCRETE VIBRATOR Compact, lightweight, durable 40.2cc, two stroke gas engine. Uses diaphragm carburetor and no low oil shutoff. Cast aluminum housing contains 2x internal gear speed increaser, and a simple disconnect for easy storage. Available with Square Head sizes 13/16", 1", 1-3/8", 1-3/4" and 2". Adjustable speed allows operator to match vibrator speed to the mix. Visual readout indicator displays engine speed and total operating hours. Heavy-duty clutch. Backpack unit only 20 pounds. Swivel mounted, isolated frame. Shafts available in 7', 10' and 14' lengths. 1 SQUARE HEAD EZ VIBE Compact, portable hand-held vibrator. Adjustable speed allows operator to match vibrator speed to the mix. 35cc air-cooled 4-cycle engine, no need to mix oil in fuel. 1.6 hp., 0.65 liter fuel capacity motor. Shaft length is 6 feet and includes a 1.38" head. Uses a diaphragm carburetor. Includes shoulder harness and weighs only 23 pounds. Available with either a Robin or a Honda engine. SQUARE HEAD HIGH CYCLE CONCRETE VIBRATOR Creates powerful force for consolidation. Compatible with 230 volt, 3-phase high cycle generators. 25' power cord. Maintains uniform speed/frequency under load. Square Head performance. Multi-speed capability when used with Select-Cycle converter. BD PNEUMATIC CONCRETE VIBRATOR Easy to handle. Variable air flow rate with a twist grip throttle. Quiet, smooth operation. Built-in pneumatically driven motor which has only two moving parts, the vane and rotor. Available in four head sizes 1-1/2", 2-1/4", 2-3/4", 3" and hose lengths 10', 15' and 20' lengths. (1-1/2" is only offered in 10' lengths)

26 CONCRETE BUCKETS / ACCESSORIES General Purpose Concrete Buckets GAR-BRO General Purpose or G Series Buckets are built for modern concrete requirements and general concrete work. Sturdy design and construction provide long life expectancy. All G series buckets feature the GAR-BRO patented Double Clamshell Gate with vertical center discharge. Standard gate size is 15 inches x 22 inches. Extension collars for increased capacity are available for all models Rated Level Outside Loading Item Capacity Capacity Diameter Height Weight No. Cubic Yds. Cubic Ft. Inches Inches Pounds 442-G 1-1/ R Series Lightweight Round-Gate Buckets with 16" Diameter Gate The GAR-BRO round gate or R series concrete bucket is 30% to 50% lighter than most standard steel buckets of the same capacity. The double clamshell 16" diameter gate featuring the patented GAR-BRO venturi throat is non-jamming, grout tight and self-closing. A variety of attachments are available for all R series buckets, including rubber accordion hoppers, side chutes, air-operated gate systems and extension collars. Rated Level Loading Inside Item Capacity Capacity Height Diameter Weight No. Cubic Yds. Cubic Ft. Inches Inches Pounds 410-R 1/ R 1/ R 3/ R R 1-1/ R R Shown with optional side chute. Collection Hoppers GAR-BRO Collection Hoppers are designed to facilitate transfer of concrete from the bucket or transit mix truck to restricted areas. Used in conjunction with a variety of chutes or elephant trunk, the hoppers complete a versatile concrete placement system that will suit any job requirement. For most jobs, a center discharge collection hopper will be used as it is the most versatile. Other shapes and sizes are also available. Top Discharge Item Opening Height Opening No. Inches Inches Inches x , 8, 12, 16 Plastic Elephant Trunk Elephant Trunk is normally used with collection hoppers for placing concrete into deep or narrow forms. Light and inexpensive polyvinyl chloride (PVC) synthetic, or a nylon reinforced plastic elephant trunk which is sturdy and flexible, yet strong and light. Available in 6-, 8- and 12-inch inside diameter sizes. Item Inside For use with Rectangular Size Maximum Length Weight No. Diameter Steel Collar Item No. Inches Feet Per Foot 913-B /2 x 8-1/ lb. 4 oz. Steel Collars for Elephant Trunk Steel collars are used to support the elephant trunk and connect it to the hopper by chain linkage. Rectangular collars are used when poring into narrow forms. Round steel collars are available in 6-, 8-, 12- and 16-inch diameter sizes. Rectangular collars are available to fit all sizes of elephant trunk. Item Use with Normal Size Weight No. Item Number Inches Pounds 908* Diam. 4 * Available with Lip for use with PVC Elephant Trunk. Clamps for 6", 8" and 12" collars available

27 MASONRY EQUIPMENT MORTAR BUGGIES Model 106 Heavy-Duty Forklift Mortar Buggies Durable 10-gauge steel construction. Top edge of tub channel formed for strength. Big 1-5/16" diameter tubular steel handle. Both ends sloped for easy shoveling. Bolted-on heavy-duty casters. 2" x 8" high strength poly wheels. Wheel brakes optional. Model Capacity Dimensions Weight cu. ft. 50-1/2"L x 23-1/2"W x 28"H 165 lbs cu. ft. 54"L x 23-1/2"W x 31"H 200 lbs. MORTAR TUBS Heavy-Duty Forklift Mortar Tubs Durable 10-gauge steel construction. Continuous welded seams. Reinforced corners. One end sloped for easy shoveling. Model Capacity Dimensions Weight cu. ft. 48"L x 24"W x 22"H 155 lbs cu. ft. 32"L x 24"W x 22"H 121 lbs. Model Crane Forks for Block, Brick & General Purpose King post adjusts for load heights from 48" to 68". Adjustable stop permits use of 36", 40" and 48" pallets. Backstop helps stabilize load - 40" wide. Forks spread up 40" wide (out to out). Model Model Capacity Dimensions Weight (Frame Only) 660 King Post Frame with backstop 300 lbs. (Tines Only) ,000 lbs. Gen. Purpose - set of 2 (1½" x 4" x 46") Forged Forks 188 lbs ,000 lbs. Block - set of 6 (1½" x 2" x 47") Forged Forks 258 lbs ,500 lbs. Brick - set of 2 (1½" x 3" x 39") Forged Forks 110 lbs. Shown with tines. Model Shown with tines. CONCRETE RAKES Model 960 w/60" handle Model 961 w/48" handle Contoured, fired ash handle. 5" x 20" 14-gauge steel blade

28 HEAVY-DUTY MASONRY EQUIPMENT BRICK AND BLOCK CARTS Model 202B Rough Terrain Brick Cart Tilt capacity 600 lbs. Accommodates any banded brick package. 4 ply wide high-float tires. Heavy-duty 1" dia. axle w/3" roller bearings. Overall width 29". Weight 115 lbs. One pair 8" forks. Model 203B Deluxe Rough Terrain Brick & Block Cart Tilt capacity 1,000 lbs. Accommodates any banded block or brick package. More fork adjustment holes to accommodate banded block packages. 4 ply wide high-float tires. Heavy-duty 1" dia. axle with 3" long roller bearings. Spring loaded positioning wheels. Overall width 29". Weight 140 lbs. Two pair 15" forks and one pair 8" forks. VENEER SCAFFOLD Model Frame Only Model Leg w/pin Adjustable 2-Level Scaffold Strong but lightweight 35 lbs. Sets up fast no braces needed. Legs adjust for unlevel ground conditions. Mason s platform adjusts from 26" to 50" high. 1 frame, 2 legs and 2 pig-tail pins equal complete unit. Overall width 47-1/2". Increase Mason s Production Reduce Labor Costs on... Residential Light commercial. Load bearing walls Interior partitions. Any wall up to 9' high. MASONRY STANDS Model 302 Model " Mortar Board Stand 1" square tubular steel. Welded steel tab eliminates chains. Folds for storage and handling. Weight 11 lbs. 30" Plaster and Masonry Stand Use upright for 30" high stand or turn on side for 20" height. All ends capped to keep out dirt and mortar. No chain to clog. Folds flat for storage and handling. Weight 16 lbs

29 MASONRY HAND TOOLS TUCK POINTERS, DURASOFT HANDLE Forged from one piece of high carbon steel. Resilient DuraSoft handle provides a soft feel, reduces fatigue, and offers excellent durability. High shank and high lift give plenty of hand room. Tapered for the required sturdiness and correct flexibility. Integral finger guard protects against calluses, heat and cold. EDI Part # UPC# Size Box Case D /2" x 1/4" D /4" x 1/2" 6 6 BRICK JOINTER Tooled joints are recommended for exterior applications because the jointer compacts the mortar to keep moisture from penetrating the joint. Made from one piece of high carbon steel. Concave joint helps conceal small irregularities in laying and emphasizes the pattern. Brick jointers have a convex face for striking concave joints. Each end is a different size for making different size joints. EDI Part # UPC# Joint Size Length Box Case /2" & 5/8" 10-1/2" 6 72 GRAPEVINE JOINTER, DOUBLE-ENDED Forged from high grade tool steel and heat treated. Straight true bit makes a clean colonial joint. Unique double-ended design gives twice the wear as other. 8-1/2" length. EDI Part # UPC# Joint Size Bit Size Box Case /2" 1/8" 6 72 MARGIN TROWELS WOOD HANDLE Forged from a single piece of high carbon steel. Tempered, ground and polished from toe to heel. Hardwood handle. EDI Part # UPC# Size Box Case " x 2" " x 2" " x 2" 6 6 SLED RUNNERS, HALF ROUND / V JOINT Both ends are turned up for use in either direction. Heavy gauge steel mounting with DuraSoft handle. Half-round specifically designed for finishing horizontal joints. V pattern provides a line in the center of the joint to emphasize the joint and conceal small irregularities. Sides are 3/4". Popular for making half-round sunken or half-round rodded joints. EDI Part # UPC# Size Box Case D " x 1/2" Half Round D " x 3/4" V 6 6 BRICK HAMMER Forged in one piece from high grade steel. Perfectly balanced and securely fitted with a comfortable hickory handle. Designed for breaking, trimming and cleaning brick. Not intended for striking chisels or metal. EDI Part # UPC# Weight Length Box Case oz. 11" GRAPEVINE JOINTER Straight true bit makes clean colonial joint. Fitted with a comfortable hardwood handle and polished ferrule. 3-1/2" blade length EDI Part # UPC# Joint Size Bit Size Box Case GJ /2" 1/8" 6 6 POINTING TROWEL-WOOD HANDLE Forged from a single piece of high carbon steel for unsurpassed strength. Hardwood handle EDI Part # UPC# Size Box Case " x 2-3/4" 6 6 JOINT RAKER Large 1-3/4" skate wheels. Strong aluminum handle is contoured to fit the hand and squared off at the end. Hardened nail, adjustable to the proper depth, can be securely tightened by slipping the nail in the eye of a spade bolt and twisting. EDI Part # UPC# Size Box Case /2" x 3" JOINT RAKER Die-cut from 1/8" steel. A 5/16" and 3/8" tab at either end rakes corners. EDI Part # UPC# Size Box Case N/A 6 72 WIDE LONDON PATTERN BRICK TROWELS, DURASOFT HANDLE Resilient, durable DuraSoft handle reduces fatigue. EDI Part # UPC# Size Box Case FG " x 5-3/4" 2 12 LONDON PATTERN BRICK TROWELS, DURASOFT HANDLE Resilient, durable DuraSoft handle reduces fatigue. EDI Part # UPC# Size Box Case FG " x 4-5/8" FG " x 4-7/8" 2 12 BLOCK TONGS Heavy-duty block tongs designed and built for long wear. Can be quickly adjusted to carry from six to ten bricks. Tongs are maintenance free. EDI Part # UPC# Size Box Case "

30 MASONRY HAND TOOLS / CONCRETE FINISHING RUB BRICKS Fluted silicon carbide stone. 20-grit. Ideal for dressing down and removing form marks from concrete or cleaning brick. EDI Part # UPC# Size Box Case " x 3" x 1" " x 3-1/2" x 1-1/2" 1 5 MASONRY BRUSH Bristles made of white tampico fiber. 3-1/2" bristles are set securely in hardwood block. DURASOFT HANDLE PERMASHAPE BROKEN-IN GOLDEN STAINLESS XTRALITE TROWELS Made from the highest grade stainless steel properly shaped and tempered to a golden finish. Resilient DuraSoft handle provides a soft feel, reduces fatigue, and offers excellent durability. Aluminum alloy mounting is lightweight but very strong. PermaShape process helps maintain original broken-in shape. Broken-in shape eliminates line and ripple marks right from the start. Beveled work edges prevent surface aggregate popping. Beginning finishers can do a better job and be more productive sooner. EDI Part # UPC# Size Box Case PB145GSD " x 5" PB165GSD " x 5" 1 6 EDI Part # UPC# Size Box Case /2" x 2" % BRAIDED NYLON MASON S LINE Made from nylon, size #18. Will not unravel if struck by a trowel. Not affected by extreme moisture or dryness. Won t mildew, and it stays taut. EDI Part # UPC# Size Box Case ' white ' white ML ' Fl. Lime ML ' Fl. Orange 1 24 DURASOFT HANDLE XTRALITE FINISHING TROWELS Highest grade high carbon spring steel blade. Aluminum alloy mounting is lightweight but very strong. Resilient DuraSoft handle provides a soft feel, reduces fatigue, and offers excellent durability. EDI Part # UPC# Size Box Case MX62D " x 4" MXS64D " x 4" MXS66D " x 4" MXS81D " x 4" 1 6 DURASOFT HANDLE HIGH CARBON BLUE STEEL XTRALITE TROWEL Highest grade tempered blue spring steel. Aluminum alloy mounting is lightweight but very strong. Resilient DuraSoft handle provides a soft feel, reduces fatigue and offers excellent durability. EDI Part # UPC# Size Box Case MXS57BD " x 3" 1 12 DURASOFT HANDLE PERMASHAPE BROKEN-IN FINISHING TROWELS Highest grade high carbon spring steel. Aluminum alloy mounting is lightweight but very strong. PermaShape process helps maintain original broken-in shape. Resilient DuraSoft handle provides a soft feel, reduces fatigue, and offers excellent durability. Broken-in shape eliminates line and ripple marks right from the start. Beveled work edges prevent surface aggregate popping. Beginning finishers can do a better job and be more productive sooner. EDI Part # UPC# Size Box Case PB64D " x 4" PB66D " x 4" 1 12 DURASOFT HANDLE ROUNDED FRONT END XTRALITE TROWEL Made from the highest grade spring steel, properly shaped and tempered. Aluminum alloy mounting is lightweight but very strong. Resilient DuraSoft handle provides a soft feel, reduces fatigue, and offers excellent durability. EDI Part # UPC# Size Box Case MXS66RED " x 4" 1 12 CURB TOOL Made of heavy gauge stainless steel. 104 blade angle. Resilient DuraSoft handle. EDI Part # UPC# Size Radius Box Case D " x 5" x 3-1/2" 2" 4 4 STAINLESS STEEL SAFETY STEP GROOVER Edges are angled up to use against a guide. Used to cut six grooves, 3/4" apart, 1/4" deep. Creates a safety tread effect on steps. Cuts a groove with 1/8" radius. Resilient DuraSoft handle. EDI Part # UPC# Size Box Case D " x 6" 6 6 HEAVY-DUTY ZINC HAND EDGER Made from high quality, long wearing zinc. Resilient DuraSoft handle. Smooth finish allows for easier clean-up. Dimensionally more consistent than bronze. Longer lasting and heavier than steel edger. EDI Part # UPC# Size Radius Lip Box Case D " x 2-3/16" 1/4" 5/8" 6 6 STRAIGHT END STEEL CONCRETE EDGER Made from carbon steel, with a sturdy mounting welded to the blade. Resilient DuraSoft handle. Used to produce a radius at the edge of a concrete slab to help prevent the edge from chipping. EDI Part # UPC# Size Radius Lip Box Case D " x 6" 3/8" 1/2"

31 CONCRETE FINISHING TOOLS WOOD HANDLE Wood handles are fitted with a steel clevis. For use with tools with a clevis-style bracket. EDI Part # UPC# Size Diameter Box Case ' 1-1/2" 1 6 HEAVY-DUTY ZINC WALKING EDGER Made from high quality, long wearing zinc. Dimensionally more consistent than bronze. Longer lasting and heavier than steel edgers. Use with our #10 handle. Curved up at both ends for easy push/pull motion from either direction. Helps eliminate bending when edging large areas of concrete. EDI Part # UPC# Size Radius Lip Box Case " x 4" 1/4" 5/8" 1 1 CURVED END STEEL CONCRETE EDGER Curved ends help prevent edger from digging into wet concrete. Made from carbon steel, with a sturdy mounting welded to the blade. Resilient DuraSoft handle. Used to produce a radius at the edge of a concrete slab to prevent chipping. EDI Part # UPC# Size Radius Lip Box Case D " x 3" 3/8" 1/2" 6 24 STAINLESS STEEL CONCRETE EDGERS Straight ends. EDI Part # UPC# Size Radius Lip Box Case CE519S " x 4" 1/2" 5/8" CE520S " x 4" 3/4" 7/8" 1 6 STAINLESS STEEL GROOVER Blade made of stainless steel. Resilient DuraSoft handle. Has a sturdy steel mounting. Properly shaped bit and leading edge cut a sharp groove. Radius of 1/4", width is 1/2", and depth is 1/2". EDI Part # UPC# Size Box Case D " x 3" 6 6 BLUE STEEL EDGER Straight ends. HEAVY-DUTY ZINC HAND GROOVERS Made from high quality long wearing zinc. Smooth finish allows for easier clean-up. Finely finished to cut sharp clean grooves. Dimensionally more consistent than bronze. Resilient DuraSoft handle. EDI Part # UPC# Size Radius Width Depth Box Case D " x 4-3/8" 1/4" 3/8" 1/2" D " x 4-3/8" 1/4" 3/8" 3/4" D " x 4-3/8" 1/4" 3/8" 1" 1 6 HEAVY-DUTY ZINC WALKING GROOVER Made from high quality, long wearing zinc, harder than bronze. Dimensionally more consistent than bronze. Has the weight and finish to cut quickly and cleanly. For use with our #10 handle. Radius is 1/4". Both ends turned up so it can be used in either direction. Helps eliminate bending when working large areas of concrete. EDI Part # UPC# Size Width Depth Box Case " x 4-3/8" 3/8" 1" 1 12 BULL FLOAT GROOVER ATTACHMENT Made from durable hardened aluminum. Slide easily over any magnesium bull float to give the ability to form grooves or expansion joints. Two thumbscrews are used to tighten the attachment to the bull float. Can also be used in combination to form multiple grooves. EDI Part # UPC# Radius Width Depth Box Case /4" 3/4" 1" 1 1 BROKEN-IN MAGNESIUM HAND FLOATS Pre-shaped across length and width of blade. Front and back of blade won t dig in, while sides glide over surface. Extruded from very hard, durable, lightweight magnesium. DuraSoft handles are secured with torque pad screws that will not back out. Assist the user in preparing the surface for troweling. If a float (rough) finish is desired, floating is the final operation. Recommended for use with air entrained concrete. Magnesium floats produce a smoother finish than wood. DuraSoft handle, provides a soft feel, reduces fatigue, and offers excellent durability. EDI Part # UPC# Size Box Case Bl145D " x 3-1/8" Bl146D " x 3-1/8" EDI Part # UPC# Size Radius Lip Box Case CE546B " x 6" 3/8" 1/2" 1 12 CONCRETE EDGER Has a steel blade, steel mounting and mortised wood handle. Both ends are slightly curved for working ease. Used to produce a radius at the edge of a concrete slab to help prevent the end from chipping off. EDI Part # UPC# Size Radius Box Case " x 2-3/4" 3/ ROUND END MAGNESIUM FLOAT Extruded from very hard, durable, lightweight magnesium. Comfortable handle is positioned to give the tool perfect balance. Handles are secured with torque pad screws that will not back out. Assists the user in preparing the surface for troweling. If a float (rough) finish is desired, floating is the final operation. Magnesium floats produce a smoother finish than wood. Fully rounded ends help prevent float marks. EDI Part # UPC# Size Box Case D " x 3-1/8"

32 CONCRETE FINISHING TOOLS CAST MAGNESIUM FLOAT Cast from the finest magnesium. Placement of the handle gives the float perfect balance. Designed with just the right broken-in shape. Cast construction allows more knuckle clearance. Handles are secured with torque pad screws that will not back out. EDI Part # UPC# Size Box Case D " x 3-1/8" 6 6 MAGNESIUM BULL FLOAT Made from the finest extruded magnesium available. Square ends. Comes with complete bracket assembly. No other heavy-duty float outlasts this one. Lightweight, long wearing and properly balanced to provide the finish you want. Using several handle sections, the finisher can float a slab well beyond normal reach. EDI Part # UPC# Size Box Case B " x 8" 1 1 BLUE GLIDER Made of blue spring steel. Round ends. A c-channel runs the length of the glider to help strengthen the blade. Included with the gliders is a hardware package that contains two bolts, two nuts, two lock washers and two flat washers. Can be used with #RL6 RotaLeveler or #AB4 AutoJust. EDI Part # UPC# Size Box Case BG " x 12-3/8" 1 1 ROTALEVELER BULL FLOAT BRACKET Fits any bull float without adapters. Features easy control adjustment, smooth operation, and a large protected grease reservoir. Accepts most 1-3/4" and 1-3/8" push button handles without adapters. Easier to keep clean than most competitors units. CHANNEL BULL FLOAT Using several handle sections, the finisher can float a slab well beyond his reach. EDI Part # UPC# Size Box Case CB " x 6" 1 1 ROUND END BULL FLOATS The round ends help eliminate finishing marks. Made from the finest extruded magnesium alloy available. Lightweight, long wearing and properly balanced to provide the finish you want. B48FR and B72FR come with complete bracket assembly. EDI Part # UPC# Size Box Case B48FR " x 8" B48FRB " x 8" Blade Only B72FR " x 8" 1 1 MAGNESIUM BULL FLOATS Extruded from magnesium alloy. Lightweight, long wearing. Comes with bracket assembly. EDI Part # UPC# Size Box Case MB " x 8" MB " x 8" 1 1 FRESNO TROWEL Comes with an all-angle swivel attachment. EDI Part # UPC# Size Box Case FR36R " x 5" 1 6 CONCRETE BROOM Long wearing 3" black polypropylene bristles set solidly into a natural lacquered hardwood block Threaded hole accepts any standard broom handle. Ideal for applying non-slip finish to newly finished concrete surfaces. EDI Part # UPC# Size Box Case " 1 6 EDI Part # UPC# Size Box Case RL N/A 1 1 ALUMINUM HANDLE SECTIONS Lightweight, yet rigid tubular design. The large thread can be combined with similar handles made by others. Warning: When using handle extensions, always avoid contact with electrical power lines or any electrical source. EDI Part # UPC# Size Diameter Box Case B ' 1-3/4" 6 6 PUSH BUTTON HANDLE SECTIONS Spring loaded button-type aluminum sections snap together quickly. Will not loosen during use. Anodized. Can be adapted for use with bull floats and other construction tools requiring a long handle. Warning: When using handle extensions, always avoid contact with electrical power lines or any electrical source. EDI Part # UPC# Size Diameter Box Case PB72L " 1-3/4"" 6 6 HORSEHAIR BROOM Features fine grey horsehair bristles. Bristles are set in a hardwood block. Used to apply a light texture while finishing concrete. EDI Part # UPC# Size Box Case " 1 12 ROUND HOLE CONCRETE TAMPER Reinforced round hole grill. Built to take the pounding and stay flat. Properly balanced handle with rubber grips to ensure easy, safe handling. EDI Part # UPC# Size Box Case T " x 6-1/2"

33 HAND TOOLS PUSH BUTTON ADAPTER Features a threaded male end. Modifies push button handle sections for use with tools which require a threaded end; such as bull floats, concrete brooms and other tools. Can be used with our #PB72 handle and similar ones made by others. EDI Part # UPC# Size Diameter Box Case BF " 1-3/8"" 1 50 STEEL SPRED-KRETE Blade of 12-gauge cold rolled steel. Sturdy steel ferrule is welded securely to the blade and holds the contoured handle firmly in place. Superior to a jam type connector. EDI Part # UPC# Size Box Case " x 4" w/hook 6 6 PUSH BUTTON HANDLE ADAPTERS Fits 1-3/8" and 1-3/4" push button handles. Used with bull floats, fresnos, brooms, etc. EDI Part # UPC# Description Box Case Male Thread Female Thread 1 6 FRESNO ADAPTER Rugged aluminum casting. Designed specifically to connect standard threaded handle sections to a fresno, walking edger or groover, or any other tools that are equipped with similar attachment devices. Unique wrench-flats feature makes it easy to remove. EDI Part # UPC# Size Box Case N/A 6 72 MAGNESIUM ASPHALT LUTE Lightweight T section blade has blunt teeth which are designed to allow material to pass through without catching. Rugged formed steel pole connector prevents breakage and ensures rigidity. Handle sold separately. EDI Part # UPC# Size Box Case " 1 12 ALUMINUM ASPHALT LUTE HANDLE Made of seamless aluminum alloy tubing for lightness and strength. For use with our #838 magnesium asphalt lute. EDI Part # UPC# Size Diameter Box Case ' 1-1/4" METAL SCREEDS Made from metal alloy, won t rust or rot. Ends capped to prevent concrete from getting inside. Lightweight, long wearing and rigid. Warning: When using screeds always avoid contact with electrical power lines or any electrical source. EDI Part # UPC# Size Box Case ' x 1" x 4" ' x 2" x 4" ' x 2" x 4" ' x 2" x 4" ' x 1-1/2" x 3-1/2" 1 1 RESIN FLOAT Made from 3/8" thick laminated canvas resin. Extremely dense. Works the slab like a wood float but it lasts many times longer. Resilient DuraSoft handle. EDI Part # UPC# Size Box Case D " x 3-1/2" 6 6 WOOD FLOATS Made from 1/2" thick seasoned mahogany. Have a very smooth finish. HIGH STRENGTH SCREEDS Premium high strength alloy, won t rust or rot; more damage and warp resistant. End capped to prevent concrete from getting inside. Lightweight, long wearing and rigid. Length available in 6' - 24'. Warning: When using handle extensions, always avoid contact with electrical power lines or any electrical source. EDI Part # UPC# Size Box Case ' x 1-1/2" x 3-1/2" ' x 1-1/2" x 3-1/2" ' x 1-1/2" x 3-1/2" ' x 1-1/2" x 3-1/2" ' x 1-1/2" x 3-1/2" ' x 2" x 4" ' x 2" x 4" 1 1 EDI Part # UPC# Size Box Case WF " x 3-1/2" WF " x 3-1/2" 1 24 SCRATCHER TROWEL Blade made of the highest grade spring steel. Aluminum alloy mounting fitted with a curved handle. Blade is notched on three sides - 1/2 x 15/32 V. Used for scoring plaster or stucco to form a good bond between coats. Resilient DuraSoft handle provides a soft feel, reduces fatigue, and offers excellent durability. EDI Part # UPC# Size Box Case SD " x 4-1/2"

34 HAND TOOLS REBAR BENDER/CUTTER Cuts and bends rebar up to 5/8" diameter. Mounted on wood board. Rugged cast iron construction. 54" steel handle. EDI Part # UPC# Size Box Case " x 7-1/2" 1 1 DURASOFT II BLUE STEEL TAPING KNIFE Premium tempered blue steel blade with rigid alloy backer. Blade is tapered so you can run corners faster and easier. Narrow profile DuraSoft handle moves hand forward to help improve blade control. Ergonomic contours for improved comfort. One of the most lightweight knives on the market. EDI Part # UPC# Size Box Case D " x 3" 6 6 DURASOFT HANDLE PUTTY AND JOINT KNIVES Blade of high carbon steel, tempered then polished to a mirror finish. Full length tang goes through the resilient DuraSoft handle. 9-in-1 Paint Tool can be used as: a scraper, spreader, roller cleaner, crack cleaner, paint can opener and closer, nail puller, concave and convex scraper. EDI Part # UPC# Description Box Case PK200FD " Flex Putty Knife JK400FD " Joint Knife PT901D in-1 Paint Tool 6 24 HELI - ARC MUD PAN Made from heavy gauge stainless steel. Corners are heli-arc welded to form smooth, seamless inside corners that leave no place for the mud to collect. EDI Part # UPC# Size Box Case " CRESCENT TILE NIPPERS, FORMERLY DIAMOND 5/8" jaws with carbide tips. Unique plastic grip handle design for added comfort. Handle stops to protect tips. Center spring returns jaws to open position. Warning: Always wear safety goggles when using tile nippers. EDI Part # UPC# Size Box Case GT28C N/A 1 1 CHALK 8 oz. refill bottles. EDI Part # UPC# Color Box Case Blue Red 6 24 CHALK BOX Aluminum housing. Easy-to-hold, sure-grip shape. Easy to fill by simply sliding the nylon cover open. Self-locking handle and plated anchor ring. Cotton line is highly absorbent for positive marking, and is replaceable. Can also be used as a plumb bob. EDI Part # UPC# Size Box Case ' 6 6 CANVAS TOOL BAG Made of heavy-duty canvas with lock stitched seams. Waterproof masonite bottom with four metal studs. Built on a 12-gauge steel frame. Handles, billets and buckles are riveted to frame. Inside pocket to prevent small tools from being lost. EDI Part # UPC# Size Box Case " x 15" 1 12 RUBBER FLOATS Has a 5/8" thick red rubber pad specially bonded to the aluminum backing plate for long wear. Frequently used by plasterers and other finishers for rough and/or textured finishes. Available with a fine or a coarse pad. EDI Part # UPC# Size Box Case " x 4" - Fine " x 4" - Coarse 1 24 NEOLITE KNEE PADS Tough construction to stand up under hard wear. Neolite pads are felt lined and shaped to fit your knee. One leather strap holds them in place. Strap will not slip or bind. EDI Part # UPC# Size Box Case N/A 1 20 DURANOTCH TROWELS DuraNotch teeth are hard chrome plated for extra wear so they keep their shape longer than regular notched trowels. Tempered steel blade. Cast aluminum mounting. Blade size is 11 x 4-1/2. EDI Part # UPC# Size Notch Style Box Case SDDN /4" x 3/8" x 1/4" U SDDN /2" x 1/2" x 1/2" SQ SDDN /4" x 3/16" V 1 12 HEAVY-DUTY FITTED KNEE PADS Cordura nylon fabric with a large, non-marring plastic cap. Contour fitted. Offer improved weight distribution and better protection. Have wide Velcro straps. Heavy pad provides maximum protection. Water and abrasion resistant. EDI Part # UPC# Size Box Case KP N/A

35 Hydraulic Cutters Electric Cutters Gas Cutters Power Packs Concrete Saws Abrasive Wheels Grinding Discs Core Drill Rigs Diamond Core Bits Wire Saws Saw Blades Ring Saw Blades & Chains Chainsaws Concrete Cutting & Demolition 3 Tamco, Inc. Hydraulic Power Units Hydraulic Pumps Hydraulic Breakers Hydraulic Hammers Air Compressors Tampers & Chippers Rock Drills Power Tools Carbide Bits 63

36 POWER CUTTERS K750 The Husqvarna K750 has a modern, compact appearance. To make operation even easier it features a larger front handle providing a more comfortable grip. Applications: Cuts concrete and masonry in alteration, renovation and new construction work. Cuts smaller holes and adjusts window and door openings. Cuts curbstones and pavers in landscaping. Pipe cutting in installation work. Asphalt cutting in roadwork and pre-cutting in pipe trenches. Metal cutting. Benefits: Active Air Filtration, centrifugal air cleaning in three stages, for extended product life and longer service intervals. Engine with X-Torq produces more power, higher torque and 70% fewer emissions. SmartCarb, built-in automatic filter compensation, maintains high power and lowers fuel consumption. DuraStarter, the dust-sealed starter, and the durable starter cord reduce the risk of downtime and increase reliability and service life. Blade sold separately. TECHNICAL SPECIFICATIONS Engine Air-cooled 2 stroke engine Displacement 74 cc Power - hp (kw) 5 (3.7) Maximum RPM (no load) 5,400 Fuel capacity - qt. (l).95 (.9) Blade diameter - in. (mm) 12/14 (300/350) Cutting depth - in. (mm) 4/5 (100/127) Weight w/o fuel and cutting equip. - lbs. (kg) 21.8 (9.7) K750 K750 12" K750 14" Item no K750 OilGuard Applications: Cuts concrete and masonry in alteration, renovation and new construction work. Cuts smaller holes and adjusts window and door openings. Cuts curbstones and pavers in landscaping. Pipe cutting in installation work. Asphalt cutting in roadwork and pre-cutting in pipe trenches. Metal cutting. Blade sold separately. Benefits: Prevents engine failures from raw gas or improper mixing. OilGuard is a quality oil developed specifically for dusty environments like construction sites. Oil Guard oil is ideal for all air-cooled two-stroke engines. You can use standard two-stroke oil in a K750 OilGuard machine; simply pull out the OilGuard button by the rear handle. OilGuard is a synthetic blend designed for power cutters and any other 2-cycle equipment used in tough, dirty conditions. OilGuard oil lowers engine operating temperatures and reduces smoke. OilGuard s unique yellow color is used to regulate Husqvarna s patented OilGuard system in selected power cutter models to eliminate piston and cylinder failures caused by lack of lubrication. TECHNICAL SPECIFICATIONS Engine Air-cooled 2 stroke engine Displacement 74 cc Power - hp (kw) 5 (3.7) Maximum RPM (no load) 5,400 Fuel capacity - qt. (l).95 (.9) Blade diameter - in. (mm) 12/14 (300/350) Cutting depth - in. (mm) 4/5 (100/127) Weight w/o fuel and cutting equip. - lbs. (kg) 21.4, (9.7) K750 OilGuard K750 OilGuard 12" K750 Oil Guard 14" Item no

37 POWER CUTTERS K 960 Ring Applications: Cuts holes in alteration, renovation and new construction work. Adjustment of window and door openings. Pipe cutting for installation work. Benefits: Cutting depth of 10", twice the depth of a traditional power cutter. Active Air Filtration, centrifugal air cleaning in three stages, extends product life and service intervals. Engine with X-Torq produces more power, higher torque and greatly reduced emissions. SmartCarb, a built-in automatic filter compensation, maintains high power and lowers fuel consumption. EasyStart provides 50% easier starts. DuraStarter, a dust-sealed starter, and the durable starter cord reduce the risk of downtime and increase reliability and service life. The Poly V-belt provides better power transmission, less retensioning and increased product life. Efficient vibration and sound dampening make the machine more convenient to use. K 960 Chain Applications: Perfect for small and irregularly shaped openings. An excellent complement to a wall saw, it helps avoid overcutting at the corners. Cuts small holes and adjusts window and door openings. Benefits: Make up to 15" deep cuts from one side. Active Air Filtration, centrifugal air cleaning in three stages, extends product life and service intervals. Engine with X-Torq produces more power, higher torque and greatly reduced emissions. SmartCarb, a built-in automatic filter compensation, maintains high power and lowers fuel consumption. DuraStarter, a dust-sealed starter, and the durable starter cord reduce the risk of downtime and increase reliability and service life. Efficient vibration and sound dampening. Blade sold separately. TECHNICAL SPECIFICATIONS K 960 Ring Item no Engine Air-cooled 2 stroke engine Displacement cu. in. (cc) 5.7 (94) Maximum horsepower - hp (kw) 6.1 (4.5) Ring blade diameter - in. (mm) 14 (350) Cutting depth - in. (mm) 10 (260) Weight w/o fuel and cutting equip. - lbs. (kg) 28.8 (13.1) Ring Saw Blades Item No. PXR 45 (Blue) ELR 20 (Yellow) ELR 45 (Blue) ELR 70 (Blue-Red) SLR 45 (Blue) ELR 20 (Yellow).220" wide Ringblade II All ring blades include a drive disk. 14" bar included. Chain sold separately. Feature: Fast cutting with depths to 10" Total segment height:.200" diamond depth TECHNICAL SPECIFICATIONS K 960 Chain Item no Engine Air-cooled 2 stroke engine Displacement cu. in. (cc) 5.7 (94) Power - hp (kw) 6.1 (4.5) Bar - in. (mm) 14 (350) Cutting depth - in. (mm) 15 (381) Weight w/o fuel and cutting equip. - lbs. (kg) 20.7 (9.4) 3 Diamond Chains Feature: Fast cutting with depths to 15"; 32 segments/ 64 drive links Total segment height:.200" diamond depth We have developed a special series of diamond chains for the K960 Chain. They are available in a variety of hardnesses, for different types of cuttings jobs, and are designed for high-power, tough operation. Fitting the saw bar and chain is easy, and the chain is tensioned without any tools. Item No. PXC ELC ELC SLC " bar

38 POWER CUTTERS / POWER PACKS K 3000 Electric / K 3000 Wet Applications: For cutting indoors and outdoors. Ideal for quick and easy cutting of building block, pipe, reinforcement bar, supports, etc. Easily adjusts between cutting different materials. Benefits: One of the market s most powerful and versatile electric power cutters. Considerable distance between handles for safe control and reduced load. Elgard, the advanced electronic overload protection system, varies the rotation speed to warn of an approaching overload. Electronic Softstart provides starting with normal, slow-acting fuses. Quick-locking of the spindle and a large outlet in the blade guard simplifies blade changes. Generously dimensioned miter gear provides high durability, minimal power loss and low noise levels. K 3000 Electric Blade sold separately. TECHNICAL SPECIFICATIONS K 3000 ELECTRIC 12 K 3000 ELECTRIC 14 K 3000 WET 14 Item no Electric motor - volt Rated output - watt 1,800 1,800 1,800 Blade diameter - in. (mm) 12 (305) 14 (350) 14 (350) Cutting depth - in. (mm) 4 (100) 5 (127) 5 (127) Weight without blades - lbs. (kg) 16.3 (7.4) 16.8 (7.6) 17.4 (7.9) Hydraulic Power Pack PP 418 Applications: Can power any hydraulic tool requiring 5, 8 or 10 gpm flow at 2,000 psi. Ideally suited to provide power for Husqvarna K2500 power cutter, K3600 MK II ring saw and other power cutters. Power for Husqvarna DM 406 H and other core drills. Perfect for diamond chain saws. Use with Husqvarna WS 325 and other small wall saws. Also for breakers, tampers, drivers, chippers, drills, earth augers and more. Benefits: Unique hydrostatic pump system does not use engine rpm to regulate flow, providing more consistent and accurate flow at 5, 8 and 10 gpm. Electronic engine controller maintains constant engine speed under load to ensure maximum power at all flow settings. Automatic power-on-demand saves fuel and has a five second delay for smoother tool operation during intermittent cutting conditions. Electro-Hydraulic Power Pack PP 325 E This simple and efficient, yet versatile, cart-mounted power pack includes a tubular frame which protects components. The PP 325 E can be easily transported and operated by one person. TECHNICAL SPECIFICATIONS PP 418 PP 325 E Item no Engine/motor Gas twin cylinder OHV, air-cooled electric start Electric Specifications Briggs & Stratton 480V, 16 amp, 60 Hz, 3 PH Pressure - psi (bar) 2,000 (140) 2,000 (140) Flow - gal./min. 5, 8, (l/min.) (20, 30, 40) (40) Output - hp (kw) 18 (13.5) 12.5 (9) Weight including oil - lbs. (kg) 298 (135) 205 (93)

39 CONCRETE SAW FS 6600 D 3-Speed Gearbox The FS 6600 D 3-speed gearbox saw is a professional saw for large and mid-size jobs. The addition of the 3-speed gearbox extends the range of applications for an already versatile and powerful production saw. Power source...diesel Engine...John Deere Specifications HF295 Horsepower...66 Displacement - cu. in. (l) (2.4) Bore/stroke - in. (mm) (86) / 4.13 (105) Cylinders/stroke...4/4 Fuel capacity - gal. (l) (37) Oil Capacity - qt. (l) (8) Air filter...dual element radial seal Starter...Electric Engine cooling...liquid/air Blade sold separately. Applications: Large jobs such as airports, highways, larger service work and other applications where production is a concern. Ideal for mid-size and smaller jobs that require high production rates. Benefits: Tier 3/Interim Tier 4 emissions compliant. The FS 6600 D 3-speed gearbox is one of the most powerful flat saws in its range. Patented power transmission system transmits more power to the bladeshaft (60 hp) with optimum torque. Bladeshaft tachometer helps operator identify correct bladeshaft rpm for selected blade size. Optional electric tracking system allows operator to make tracking adjustments with a touch of a switch while cutting. Patented IntelliSeal bladeshaft system allows for a minimum 500-hour service interval and eliminates daily greasing of bearings. Patented variable positioning handlebars easily adjust to individual operator's preference which increases operator comfort and reduces operator fatigue. 3 TECHNICAL SPECIFICATIONS FS 6600 D 3 SP 26 FS 6600 D 3 SP 30 FS 6600 D 3 SP 36 FS 6600 D 3 SP 42 Front pivot item no Front pivot electric tracking item no Maximum blade diameter, in. (mm) 26 (660) 30 (762) 36 (914) 42 (1,067) Maximum depth of cut, in. (mm) 10-1/2 (267) 12 (305) 15 (381) 17-1/2 (445) Average bladeshaft, rpm 3,070/2,160/1,860 2,670/1,880/1,610 2,300/1,620/1,390 1,620/1,390/1,180 Blade range, in. (mm) 14/18/26 (350/450/660) 18/26/30 (450/660/762) 20/30/36 (508/762/914) 30/36/42 (762/914/1,067) Blade flanges, in. (mm) 5 (127) 5 (127) 6 (152) 7 (178) Power at bladeshaft, hp 60 Arbor size, in. (mm) 1 (25.4), single drive pin Bladeshaft diameter, in. (mm) 2 (51) Axle front/rear, in. (mm) 1 (25.4)/4-bolt hub mount Wheels front, in. (mm) 8 x 3 (203 x 76) Wheels rear, in. (mm) 10 x 3 (254 x 76) Handlebar adjustment Variable positioning Transmission type Dual motor hydrostatic drive Transmission speeds, fpm Electric tracking (optional) Electric switch operated Blade guard type Slip-on Bolt-on Number of belts 16 (4 each 4 band 3VX) Blade depth control Electrohydraulic raise and lower Maximum weight uncrated, lbs. (kg) 1,871 (849) 1,892 (858) 1,948 (884) 2,013 (869) Maximum weight crated, lbs. (kg) 1,968 (893) 1,989 (902) 2,020 (916) 2,045 (297) Dimensions uncrated, in (mm) LxWxH 67 x 38 x 57 (1,701 x 965 x 1,448)

40 CONCRETE SAW FS 4800 D 3-Speed Gearbox The FS 4800 D 3-speed gearbox saw is a professional saw for large and mid-size jobs. The addition of the 3-speed gearbox extends the range of applications for an already versatile and powerful mid-range saw. Power source...diesel Engine...Yanmar Specifications...4TNV88 Horsepower...48 Displacement - cu. in. (l) (2.19) Bore/stroke - in. (mm) (88) / 3.54 (90) Cylinders/stroke...4/4 Fuel capacity - gal. (l) (29.5) Oil Capacity - qt. (l) (7.4) Air filter...dual element radial seal Starter...Electric Engine cooling...liquid/air Blade sold separately. Applications: For jobs such as airports, highways, service work and other applications where production is a concern. Ideal for mid-size to small jobs that require high production rates when cutting depth is no more than 15". Benefits: Tier 3/Interim Tier 4 emissions compliant. The FS 4800 D 3-speed gearbox is one of the most powerful flat saws in its range. Patented power transmission system transmits more power to the bladeshaft (42 hp) with optimum torque. Bladeshaft tachometer helps operator identify correct bladeshaft rpm for selected blade size. Front pivot model has an optional electric tracking system that allows the operator to make tracking adjustments with a touch of a switch while cutting. Rear pivot model is recommended when maneuverability is key for road repair and service work. Patented IntelliSeal bladeshaft system allows for a minimum of 500-hour service interval and eliminates daily greasing of bearings. TECHNICAL SPECIFICATIONS FS 4800 D 3 SP 26 FS 4800 D 3 SP 30 FS 4800 D 3 SP 36 Front pivot item no Front pivot, electric tracking item no Rear pivot item no Maximum blade diameter, in. (mm) 26 (660) 30 (762) 36 (914) Maximum depth of cut, in. (mm) 10-1/2 (267) 12 (305) 15 (381) Average bladeshaft, rpm 3,100/2,180/1,870 2,660/1,800/1,570 2,260/1,580/1,360 Blade range, in. (mm) 14/18/26 (350/450/650) 18/26/30 (450/650/750) 20/30/36 (500/750/900) Blade flanges, in. (mm) 5 (127) 5 (127) 6 (152) Power at bladeshaft, hp 42 Arbor size, in. (mm) 1 (25.4), single drive pin Bladeshaft diameter, in. (mm) 2 (51) Axle front/rear, in. (mm) 1 (25.4)/4-bolt hub mount Wheels front, in. (mm) 6 x 2 (152 x 51) Wheels rear, in. (mm) 10 x 3 (254 x 76) Handlebar adjustment Variable positioning Transmission type Dual motor hydrostatic drive Transmission speeds, rear pivot, fpm differential locked, unlocked Transmission speeds, front pivot, fpm differential locked Electric tracking (optional) Electric switch operated Blade guard type Slip-on Number of belts 12 (4 each 3 band 3VX) Blade depth control Electrohydraulic raise and lower Maximum weight uncrated, lbs. (kg) 1,420 (644) 1,440 (653) 1,460 (662) Maximum weight crated, lbs. (kg) 1,493 (677) 1,513 (694) 1,533 (695) Dimensions uncrated, in (mm) LxWxH 56 x 33-1/4 x 51 (1,422 x 845 x 1,295)

41 CONCRETE SAW FS 400 The Husqvarna FS 400 is a robust, convenient all-around flat saw. The adjustable handle ensures low vibrations and an ergonomic working position. Perfect weight distribution means excellent stability while sawing. Ideal for small jobs. Power source...gasoline Engine...Honda Specifications...GX390 Net horsepower (rated by engine mfg.)...11 Displacement - cu. in. (l) (389) Bore/stroke - in. (mm) (88) / 2.5 (64) Cylinders/stroke...1/4 Fuel capacity - gal. (l) (6.1) Oil Capacity - qt. (l) (1.1) Air filter...dry type dual element, cyclonic Starter...Recoil Engine cooling...air Applications: Ideal for small road repair jobs in concrete or asphalt. Cutting trenches for pipe laying. Making expansion joints in concrete floors. Cutting channels for impedance loop fittings or cable laying. Benefits: Productive saw with excellent weight distribution and stability. Adjustable, low-vibration handlebar for operator comfort. Patented gas-assisted raise/lower system. Easy to transport and lift. Optimum power transmission to the blade due to the Poly V-belt. Large integrated water tank is standard. 3 TECHNICAL SPECIFICATIONS FS 400 Item no Maximum blade diameter, in. (mm) 18 (450) Maximum depth of cut, in. (mm) 6-5/8 (168) Average bladeshaft, rpm 2,800 Blade flanges, in, (mm) 4-1/2 (114) Arbor size, in. (mm) 1 (25.4), drive pin Bladeshaft diameter, in. (mm) 13/16 (21.5) Axle front/rear, in. (mm) 3/4 (19)/3/4 (19) Wheels front, in. (mm) 5 x 1-1/2 x 5/8 (125 x 38 x 16) Wheels rear, in. (mm) 8 x 1-1/2 x 5/8 (203 x 38 x 16) Handlebar adjustment Yes Blade guard type Bolted Number of belts 12 rib Poly V-belt Blade depth control Screw feed Maximum weight uncrated, lbs. (kg) 219 (99) Maximum weight crated, lbs. (kg) 276 (125) Dimensions uncrated, in. (mm) LxWxH 42 x 20 x 30 (1,067 x 508 x 991) Central lift bail for easy loading and unloading

42 CONCRETE SAW ACCESSORIES Husqvarna FS 6600 D 3-Speed, FS 6600 D, FS Speed, FS 4800 D Accessories DESCRIPTION ITEM NO. Weight kit, 1 bar - 35 lbs. (FS 6600 D) Weight kit, 2 bar - 70 lbs. (FS 6600 D) Dual work light kit Water pump kit (FS 6600 D) Water pump kit (FS 4800 D) Extra blade guards 14" blade guard slip-on " blade guard slip-on " blade guard slip-on " blade guard slip-on " blade guard slip-on " blade guard slip-on " blade guard bolt-on (FS 6600 D) " blade guard slip-on (FS 6600 D) " blade guard slip-on with mount kit Bladeshaft plunge kit 20" (FS 6600 D) Catalytic converter kit (FS 4800 D)* *Not intended for indoor use. Husqvarna FS 413 Accessories FS 413 Husqvarna FS 400 Accessories DESCRIPTION ITEM NO. Bladeshaft wrench Water tank kit (6.6 gal.) Extra blade guard 18" blade guard DESCRIPTION ITEM NO. Bladeshaft wrench Water tank kit (7.9 gal.) Front cutting guide Extra blade guard 18" blade guard (1-piece only) FS 4800 D FS 400 FS 6600 D Husqvarna FS 3500 E Accessories DESCRIPTION ITEM NO. Water pump kit (electric) Deluxe spotlight kit (dual lens) Tie down kit Outer flange kit (15/16" joint sawing) Blade wrench Parking brake kit Extra slip-on blade guards 18" blade guard slip-on " blade guard slip-on " blade guard slip-on " narrow blade guard " narrow blade guard Husqvarna FS 309 Accessories DESCRIPTION ITEM NO. Bladeshaft wrench Water tank kit complete Extra blade guard 14" blade guard FS 309 FS 3500 Husqvarna FS 500 Series Accessories DESCRIPTION ITEM NO. Bladeshaft wrench Water tank kit (6.6 gal.) Extra blade guards 18" blade guard " blade guard " blade guard Husqvarna MG 8, MG 10 Accessories DESCRIPTION ITEM NO. Replacement blade wrench - 1" open end Replacement blade wrench - 9/16" hex FS 500 MG

43 SAW BLADES High-Speed Segmented Diamond Blades Application All-purpose. Cutting Type Wet or Dry Cutting. For Equipment Type High Speed, Small Walk-behind, and Masonry saws. HI5 (Super Premium) is for fast cutting of a wide variety of materials on the first pass, such as cured concrete and brick. The HI5 is the only all-purpose diamond blade with aggressive notched segments which grab and grind material for a rapid first cut. Total Segment Height:.475" (.375" diamond depth;.100" segment base) EH5 for general purpose cutting of concrete, masonry and stone. EH8 for use on a wide range of abrasive materials such as soft brick, abrasive block and green concrete or cured concrete with soft aggregate. Extreme EH10 slightly harder bond for longer life when cutting a wide range of abrasive materials such as soft brick, abrasive block and green concrete. Size Inches (mm) H15 EH5 EH8 EH10 12 (305) x.125 x 1DP - 20mm B (356) x.125 x 1DP - 20mm B (400) x.140 x 1DP - 20mm B MILLENIUM F710C/F720C/F730C/F740C.315" Series Cured Concrete Blades, HP F710C blade is used to cut flint aggregate, river gravel and concrete with heavy steel reinforcement. F720C blade can cut concrete with a medium steel reinforcement and river gravel. F730C blade is perfect for cutting hard limestone to granite as well as concrete with light steel reinforcement. F740C blade cuts limestone, abrasive sand aggregate and some asphalt overlay. 48" deep set recommendation: 18 x.250", 26 x.220", 36 x.220", 48 x.220". All narrow notch blades 24" in diameter or larger have recessed segment undercut protection. Total segment height is.390" (.315" diamond depth;.075" segment base). Size - in. (mm) Narrow notch F710C (C1-315) F720C (C2-315) F730C (C3-315) F740C (C4-315) 20 (508) x.125 x 1 DP (508) x.140 x 1 DP (508) x.165 x 1 DP (600) x.165 x 1 DP (600) x.187 x 1 DP (600) x.220 x 1 DP (660) x.165 x 1 DP (660) x.187 x 1 DP (660) x.220 x 1 DP Wide notch 26 (660) x.165 x 1 DP (660) x.187 x 1 DP MILLENIUM F770A/F780A/F785A. ASPHALT BLADES, HP F770A blade is used to cut non-abrasive aggregate or rounded non-abrasive sand. F780A blade is for general purpose asphalt cutting. F875A blade cuts asphalt with soft aggregates or very abrasive sand. 14" - 18" narrow notch diameter blades have vertical insert `undercut protection. Blades 20" in diameter or larger have recessed segment undercut protection. All wide notched blades have both vertical insert and recessed segment undercut protection. Total segment height is.390" (.315" diamond depth;.075" segment base). Size - In. (mm) Narrow notch F770A* (A1) F780A (A2) F785A* (A3) 20 (508) x.140 x 1 DP (508) x.165 x 1 DP (600) x.165 x 1 DP (600) x.187 x 1 DP (660) x.165 x 1 DP (660) x.187 x 1 DP Wide notch 26 (660) x.165 x 1 DP (660) x.187 x 1 DP * Brazed items. 3 Grinding Cup Wheels - General Purpose Wheels Red C16ST silicon carbide specification wheel is used for general purpose work; concrete and masonry products, cast iron, ductile iron and titanium. Blue A16ST aluminum oxide specification wheel is for general purpose work on mild steels, stainless steel, alloys and cast steels. Resinoid cup grinding wheels for fast, efficient grinding and long life; all Husqvarna grinding cup wheels include steel backs for increased safety. Size Inches (mm) Red Blue C16St A16St 4 (102) x 2 x 5/ S001 5 (127) x 2 x 5/ S006 40S004 6 (152) x 2 x 5/ S10 40S

44 BLADES Banner Line HARD CONCRETE, GENERAL PURPOSE, GREEN CONCRETE, ASPHALT BLADES, 5-65HP Gold 150B blade can cut hard to critically hard aggregate with light to medium steel reinforcing. Blue 200B blade is a general purpose blade used to cut soft to mediumhard aggregate with light steel reinforcing. Blue 300B blades cuts soft to medium-soft aggregate and can also be used for cured joint widening. Red 450B-R blade is used for cutting green concrete, asphalt over concrete or asphalt with hard aggregate. Undercut protection is standard on this blade. Black 500B-R blade has extra extra long life when cutting abrasive asphalt. Undercut protection is standard on this blade. Job Size: Horsepower Range: Feature: Total Segment Height: Medium to large 5-65 HP concrete saws Higher production, low cost per foot.390" (.315" diamon depth;.075" segment base) Narrow notch Gold 150B Blue 200B Blue 300B Red 450B-R Black 500B-R 18 (450) x.125 x 1 DP (508) x.125 x 1 DP (600) x.155 x 1 DP (600) x.175 x 1 DP Wide Notch 26 (660) x.155 x 1 DP (762) x.175 x 1 DP (914) x.175 x 1 DP

45 GRINDING DISCS GW Dri Disc FAST REMOVAL GW1 is for fast removal (single rim) on concrete, masonry, stone and similar materials. SMOOTH FINISH GW2 is for long life and smooth finish (double rim) on concrete, masonry, stone and similar materials. GWTurbo is for a faster and smoother finish (segmented turbo) on concrete, masonry, stone and similar materials. Total Segment Height: Size Inches 4 (102) x 5/8-11 THD 4 (102) x 5/8-11 THD 4 (102) x 5/8-11 THD 4 (102) x 7/8-5/8 B 4 (102) x 7/8-5/8 B 4 (102) x 7/8-5/8 B 5 (127) x 5/8-11 THD 5 (127) x 5/8-11 THD 5 (127) x 5/8-11 THD.200" diamond segment 5 (127) x 7/8-5/8 B 5 (127) x 7/8-5/8 B 7 (178) x 5/8-11 THD 7 (178) x 5/8-11 THD 7 (178) x 5/8-11 THD 7 (178) x 7/8-5/8 B 7 (178) x 7/8-5/8 B 7 (178) x 7/8-5/8 B LW Dri Disc FAST REMOVAL LW1 is for fast removal (single rim) on concrete, masonry, stone and similar materials. SMOOTH FINISH LW2 is for long life and smooth finish (double rim) on concrete, masonry, stone and similar materials. LWTurbo is for a faster and smoother finish (segmented turbo) on concrete, masonry, stone and similar materials. 3 Total Segment Height:.200" diamond segment Size Inches 4 (102) x 5/8-11 THD 4 (102) x 5/8-11 THD 4 (102) x 5/8-11 THD 7 (178) x 5/8-11 THD 7 (178) x 5/8-11 THD 7 (178) x 5/8-11 THD

46 CUT-OFF SAWS TS 420 STIHL Cutquik Professional User No need to waste time cleaning filters. No messy, grimy and less efficient oil-soaked foam filters to fool with. Over twice the life of previous filtration systems. This filter can last up to one year, based on cutting conditions. Superior air filtration (99.96% cleaning efficiency) leading to longer engine life. Manifold separation tunnels remove over 80% of dust before it ever reaches the filter. Standard in the TS 410, TS 420, TS 700 and TS 800. Easy access to the air filter X2 Air Filtration. Standard Features X2 low maintenance air filtration system. Filters can last up to 1 year. No need to clean filters. Newly designed anti-vibration system reduces vibration up to 43% over previous models. Powerful and fuel-efficient stratified charge engine. Emissions reduced up to 44% compared to TS 400. IntelliCarb compensating carburetor. Lightweight and well balanced compact top handle design. ElastoStart starter handle and decompression valve. Semi-automatic belt tensioner. Reversible cutting arm for inboard or outboard cutting. Able to be mounted on cart with adapter kit. Integrated water attachment. There are no easy jobs in the construction and demolition business, but when it comes to cutting performance there is one easy choice: the 14" TS 420 STIHL Cutquik cut-off machine. Introducing the TS 420 STIHL Cutquik cut-off machine, one of the best we ve ever built. We ve followed up the legendary and number one worldwide-selling TS 400 with a cut-off machine that is even better. This new TS machine can help you work longer, and keep on schedule, thanks to patented advancements in technology and renowned STIHL innovation. With the TS 420 STIHL Cutquik cut-off machine, you can work longer and more comfortably, and get the job done right. The fact is that no other cut-off machine delivers this unique blend of performance, comfort and efficiency. Cut-off Machine Comparison Chart TS 410 TS 420 TS 460 TS 700 TS 800 Displacement 66.7cc 66.7cc 72.4cc 98.5cc 98.5cc (4.07 cu. in.) (4.07 cu. in.) (4.42 cu. in.) (6.0 cu. in.) (6.0 cu. in.) Engine Power 3.2kW 3.2kW 3.5kW 5.0kW 5.0kW (4.4 bhp) (4.4 bhp) (4.75 bhp) (6.7 bhp) (6.7 bhp) Weight 9.4kg 9.6kg 10.65kg 11.6kg 13.2kg (20.7 lbs.)* (21.2 lbs.)* (23.5 lbs.)* (25.6 lbs.)* (28.7 lbs.)* Fuel Capacity 770cc 770cc 960cc 1200cc 1200cc (26 oz.) (26 oz.) (33.4 oz.) (40.6 oz.) (40.6 oz.) Engine Speed 9,500 rpm 9,500 rpm 9,500 rpm 9,800 rpm 9,000 rpm (Elec. Gov.) (Elec. Gov.) (Elec. Gov.) (Elec. Gov.) (Elec. Gov.) Maximum Spindle Speed 5,350 rpm 5,350 rpm 5,350 rpm 5,350 rpm 4,600 rpm Arbor Size 20mm 20mm 20mm 20mm 20mm Maximum Wheel Size 300mm 350mm 350mm 350mm 400mm (12") (14") (14") (14") (16") Maximum Cutting Depth 100mm 125mm 125mm 125mm 143mm (3.9") (4.9") (4.9") (4.9") (5.6") *Weight includes water attachment and guard. IMPORTANT INFORMATION: Improper use of any power tool may cause serious or fatal injury. Read, understand and follow carefully the operating and safety instructions in your owner s manual before using these products. WARNING! Never use carbide-tipped, wood cutting or circular saw blades on cut-off machines. They can cause severe personal injury or death from reactive forces, blade contact or thrown tips. Never cut wood of any type

47 ABRASIVE WHEELS BONDED ABRASIVE BLADES FOR ALL HIGH SPEED GAS POWERED SAWS High Speed Concrete Cut Off Wheels Item Number Dimensions Box Qty " x 1/8" x 1" " x 1/8" x 1" " x 1/8" x 20mm " x 1/8" x 20mm 10 High Speed Metal Cut Off Wheels Item Number Dimensions Box Qty " x 1/8" x 1" " x 1/8" x 1" " x 1/8" x 20mm " x 1/8" x 20mm 10 High Speed Ductile Iron Cut Off Wheels Item Number Dimensions Box Qty " x 1/8" x 1" " x 1/8" x 1" " x 1/8" x 20mm " x 1/8" x 20mm 10 Floor Grinding Blocks Item Number Dimensions Type " x 2" x 4" 24-grit " x 2" x 4" 10-grit " x 2" x 4" 8-grit Wooden Wedges 3 Flaring Cup Stones for Concrete Item Number Dimensions " x 2" x 5/8" " x 2" x 5/8" - 11 Contractors demand superior performance and competitive prices on Cut-off Wheels. That is why Virginia Abrasives bonded abrasives are the leading choice. Whether your customer is cutting metal, concrete or ductile iron, we offer a product designed to keep them coming back. The fast delivery allows you to manage your inventory and provide excellent service. When it comes to bonded abrasives no one out-performs Virginia Abrasives

48 ABRASIVE BLADES Type 27 Depressed Center Grinding Wheels A 24 N Aluminum oxide general purpose wheel for grinding steel and other ferrous metals in normal working conditions. High stock removal. Good wheel life. A 24 R Aluminum oxide general purpose wheel for heavier working conditions for steel and other ferrous metals. Good stock removal. Longer wheel life. Small Grinders Order # Size Spec. Application Max. RPM /2 x 1/4 x 5/8-11 A 24 R Steel 13,300 Large Grinders x 1/4 x 7/8 A 24 N Steel 6,600 Type 1 ORIGINAL SLICER Cutting Wheel A 60 TZ Aluminum oxide wheel for steel and other ferrous metals. Extremely fast rate of cut. Good wheel life. Small Grinders (Type 1) Order # Size Spec. Application Max. RPM /2 x 0.40 x 7/8 A 60 TZ Steel / Stainless Steel 15,000 Type 1 SLICER-PLUS High - Performance Cutting Wheel A 60 TX Coated aluminum oxide formulated to provide very long life and very aggressive cool cutting action on all metals. Small Grinders (Type 1) Order # Size Spec. Application Max. RPM x 0.45 x 7/8 A 60 TX Stainless Steel 10,185 Type 1 Cutting Wheels - High Speed Saws A 24 N Aluminum oxide general purpose wheels for cutting steel and other ferrous metals. Good wheel life. C 24 N Silicon carbide general purpose wheel for stone, concrete, cast iron, ductile iron,masonry materials, non-ferrous metals, brass, bronze, plastic, etc. Fast rate of cut. Good wheel life. Order # Size Spec. Application Max. RPM x 1/8 x 20mm A 24 N Steel 5, x 1/8 x 20mm C 24 N Masonry / Non-Ferrous 5,460 Type 11 Cup Wheel with Steel Back - Large Grinders A 16 Q Aluminum oxide general purpose wheel for grinding steel and other ferrous metals. High stock removal. Good wheel life. Order # Size Spec. Application Max. RPM x 4 x 2 x 5/8-11 A 16 Q Steel / Ferrous Metals 7,200 Type 27 Zirconia Alumina Flap Disc Spec Zirconia alumina grain delivers extremely long life with very aggressive stock removal and excellent blending capabilities. Use for steel, stainless steels, and non ferrous metals. Standard Long life with aggressive stock removal and good blending properties. Order # Size / Spec /2 x 7/8 - ZA80 Flap Wheel - Mounted Style - 1/4 Shank Standard Aluminum oxide on resin fiber backing provides excellent stock removal on contoured steel shapes and in confined areas. Order # Size Spec. Application Max. RPM x 1 A 60 Steel / Stainless Steel 25,000 Wire Cup Brush Other sizes available. Other sizes available. Other sizes available. Other sizes available. Other sizes available. Other sizes available. Other sizes available. 0º to 15º Small Air and Electric Grinders Order # Dia. Thread Wire Max RPM Use on /4" M carbon stl knotted 12,000 4"-6" grinders Other sizes available. Wire Wheel Brush Small Air and Electric Grinders Order # Dia. x Face Thread Wire Max RPM Use on " x 3/16" M carbon stl knotted 20,000 4"-6" grinders Other sizes available

49 CORE DRILLING DS 800 Core Drill Rig TECHNICAL SPECIFICATIONS Power, watts 2,300 Voltage/amperage 110/20 Maximum bit diameter without spacer, in. (mm) 14 (350) Travel Length, in. (mm) 25-1/2 (648) Spindle speed full load high speed, rpm 350 / 780 / 1,340 Spindle speed full load low speed, rpm 240 / 540 / 930 Weight, lbs. (kg) 108 (49) Applications: Drill holes up to 16" (extra spacer required). 1" to 14" bit capacity standard. Spacers available for larger bit sizes. 42" long, precision ground and plated 2-7/8" square column reduces flex for more accurate drilling. Benefits: Reinforced base for added rigidity. Optional control panel includes on/off switch, ammeter and two receptacles for the motor and vacuum pump. Jack screw is standard and provides stability for ceiling bracing. Precision rack and pinion gear system for smoother operation. Adjustable and replaceable brass shims inside carriage provide less flex, promote precise head alignment and smooth feed travel. Roller carriage option. STANDS LESS MOTORS ITEM NO. DS 800 combo base stand less control panel DS 800 anchor base stand less control panel DS 800 combo base stand with control panel DS 800 anchor base stand with control panel DS 800 stand with roller carriage less control panel, combo base DS 800 stand with roller carriage less control panel, anchor base DS 800 TECHNICAL SPECIFICATIONS DS 800/DM 280 HIGH SPEED DS 800/DM 280 E LOW SPEED Combo base item no Combo base w/ vac. assy. item no Anchor base item no Combo base, roller carriage item no Combo base, roller carriage, vacuum assembly item no Anchor base, roller carriage item no DM 230 Handheld Core Drill Motor Applications: Handheld core drilling up to 4" in diameter. Can be mounted on Husqvarna drill stand DS 150 for angle drilling and holes up to 6". For reinforced concrete, bricks and other building material. Drills holes for ventilation, plumbing pipes, joints, electrical sockets and telecom cables. Benefits: Equipped with Elgard, which indicates via pulsation when the machine is overloaded, provides a longer product life. For a smooth start to drilling, the drill motor is equipped with Softstart. For drilling in hard materials such as rebar, the drill motor is equipped with Smartstart. The three-speed water-cooled gearbox provides optimal drilling performance and longer service intervals. Designed with a plastic housing which makes it more durable against drops and daily wear. The handle and the controls are designed and positioned to further enhance ergonomics and user comfort. The position of the pistol grip handle and the front handle provides the operator good control of the drill bit torque. TECHNICAL SPECIFICATIONS DM Speed Item no Power, watts / Voltage, volts 1,850 / 110 Motor 1-phase, electric Rated output, watts 1,100 Rated current, amps 15 Spindle speed idle high speed, rpm 900 / 2,150 / 4,500 Spindle speed full load high speed, rpm 500 / 1,400 / 2,900 Maximum bit diameter with stand/handheld, in. (mm) 6 (152) Mounting collar, in. (mm) 238 (60) Spindle thread, outer (inner) 1¼"-7 (5/8"-11) UNC water coupling G ¼" Sound pressure level, db(a) 90 Sound power level, db(a) 94 Weight, lbs. (kg) 12 (5.4)

50 DIAMOND CORE BITS Banner Line Bits GENERAL PURPOSE, CONCRETE AND MASONRY Banner Line bits are used for general purpose drilling of concrete, masonry and brick. This includes concrete with soft to hard aggregate and light to medium steel reinforcing and is also effective ongranite, marble and stone. Custom specs are available including open-end, spoke-back, non-standard length and threaded tubing for deep drilling. Our 3/8" to 1-1/2" bits have a 5/8" adapter. Bits 1-5/8" and above have a 1-1/4" - 7" thread adapter. Total Segment Height:.300" (.200" diamond depth;.100" segment base) Bit Diameter 3/8" - 14" Bit Diameter Adapter Thread 3/8" - 1-1/2" 5/8" 1/2" - 5/8" 1/2" - 20" 3/4" - 1-1/2" 5/8" - 11" 1-5/8" + 1-1/4" - 7" Dri Bit GENERAL PURPOSE, MASONRY DRI5 is designed for drilling brick when using an angle grinder. Also can be used for fast drilling of block, brick or soft aggregate concrete on angle grinders or hand held drills. Not recommended for hard concrete or steel. DRI8 is designed for long life drilling in lightweight block or concrete block materials on hand drills or angle grinders. Can also be used for long life drilling of brick on hand drills. Not recommended for cured concrete or steel. The specially designed barrel vents keep bits cool and provides fast removal of cuttings. Use these bits on core drilling machines or right angle grinders (mount bits directly onto standard 5/8"-11grinder spindles). These bits drill faster than conventional carbide-tipped percussion bits for a smoother finish and little patching. Feature: Total Segment Height: High production; low cost with exceptional life..280" (.220" diamond depth;.060" segment base) Dri Bit Specifications Overall Length 10-1/2" Core Travel 10" Thread Size 5/8"

51 CORE DRILLING / WIRE SAW CORE DRILLING RIG M-1 Complete Combination Rig 1" to 10" bit capacity (14" with a spacer block). Dual switch/outlet control panel & amp meter. Slide handle allows drilling in tight areas. Streamlined base and carriage. 2-1/2" square column with black oxidized finish. Quick changeover from vacuum to anchor base. 6" wheels for better mobility. Complete Combination Rig Includes: Anchor/vacuum base, mast, carriage, control panel, vacuum pump, ceiling jack, motor mount plate and your choice of drill motor: Core Bore, Milwaukee or Weka PORTABLE DIAMOND WIRE SAWS WS50 WIRE SAW Articulating wheel for vertical and horizontal cuts. Locking casters. Adjustable slide carriage. Gear box makes it easy to change from vertical to horizontal cutting. SPECIFICATIONS Dimensions: 52" H x 32" W x 108" L Weight: 1,500 lbs. Drive Wheel: 36" dia. Tension Control Cylinder: 36" stroke Recommended Power Supply: PSI Wire Speed: 0-5,000 ft./min. infinitely variable, reversible Sawing Angle: Set up vertical or horizontal from same frame Options: Mount stand, Universal wire saw clamp, 10" wheel Mobile Track Wire Saw Twice the cutting speed of conventional wire saws, infinitely variable speed, reversible drive. Works well on rough terrain, inclines and where conventional wire saws can t operate. Eliminates most of wire sawing set-up time. Powerful V6 4.3L GM industrial engine. Rubber tracks for superior movement. Entire saw can be pulled back; pulling the wire through the cut. 36" drive wheel with reversible rotation and infinitely variable speed. 12" idler wheels with grease bearings and replaceable liners. Innovative tensioning spring for consistent wire tension. Radio Remote Control has a range of up to 300 ft. for safety and convenience. HYDROSTRESS WIRE SAW The Universal Wire Saw with Integrated Wire Storage SB Wire Saw Patented multiple roll drive that makes it possible to start running with minimum wire tension and complex cutting geometry. Cutting rate is 50% higher than conventional systems. Emission-free demolition. Integrated water distribution valve. SPECIFICATIONS Wire storage capacity: Capable of cutting 33 ft. Wire required: Minimum 50 ft. Max. Wire Length: No limit Motor: 26CC/1.83 CIR for gpm power packs without case drain. Feed: Hydraulic motor, requires separate line. Dimensions: 25" L x 51" H x 26" W Weight: 375 lbs. SK-B Wire Saw Direct mounting together with a patented multiple roll drive that guarantees easy installation and trouble-free start-up. Converts from drill rig to wire saw in minutes. Large storage capacity that cuts perimeters up to 19-1/2 ft. SPECIFICATIONS Wire storage capacity: Capable of cutting 20 ft. Wire required: Minimum 25 ft. Max. Wire Length: No limit Motor: 26CC/1.83 CIR for gpm power packs. Feed: Hydraulic motor, requires separate line. SPECIFICATIONS: Fuel tank: 22 gallon Filtration system: Dual stage air filter Weight: 3,300 lbs. Length: 78" without idler Height: 68" with muffler Width: 48"

52 HYDRAULIC CHAINSAWS ICS 880F4 The new 880F4 cutting system offers the superior strength of FORCE4 technology in a package that meets industry standards of design and ergonomics. Built for the hardcore cutter, this sleek powerhouse is packed with features designed to make it the hardest working saw ICS has ever made. You get the unique versatility of a genuine ICS concrete cutting chainsaw, including the ability to cut small mechanical openings, deep plunge cuts. Cut perfect corners and an endless variety of irregular shapes that are simply not possible with circular saws. Available in both 8 gpm and 12 gpm models. ADVANTAGES: Fast, efficient, versatile and easy to use. Cuts mechanical openings quickly and perfectly. Narrow, straight plunge cuts up to 25 inches deep. Perfect square corners. Reliable and easy to maintain. Low cost of operation. FEATURES: Safety operating trigger prevents accidental starting. Automatic water valve integrated with hydraulic trigger provides water on demand. Built-in WallWalker provides leverage advantage to make cutting easier. Modular design for easy service. Ergonomic rear handle allows multiple hand positions. Tough industrial finish on die-cast aluminum body for long lasting durability. ICS 814PRO For all those times when you don t really need a full-size concrete saw, for those tight places where a larger saw won t fit or can t cut a small enough opening, ICS has the answer. The 814PRO is a rugged, reliable tool designed for the rigors of construction, yet it s smaller and lighter than our other hydraulic tools. The 814PRO saw is a wet-cutting system which uses water for eliminating airborne dust and for cleaning and lubricating the moving parts of the diamond chain. Using ICS diamond chains with SealPro, water can be supplied from an ordinary garden hose. Ideal for utility work, like plumbing or electrical openings, the 814PRO saw will cut openings as small as 3.5 x 3.5 inches. No construction site should be without at least one. ADVANTAGES: Extremely lightweight, under 15 pounds. All the benefits of diamond chain technology in a compact, easy to use size. - Perfect corners, without overcutting. - Plunge cuts up to 12-inches deep. - Very small openings (3.5 inches x 3.5 inches). Inexpensive. Costs less than full size hydraulic saws. Reliable and low maintenance. Hydraulic system and integrated design extremely rugged and easy to service. Exclusive ICS Stretch Reduction System (S.R.S.) maximizes chain life, and reduces need for adjustments. Quick and easy clean-up when used with TSS system. 880F4 SPECIFICATIONS: Operating Speeds 6100 rpm (8gpm) / 6400 rpm (12gpm) Torque 122 in.-lbs. (8gpm) / 172 in.-lbs. (12gpm) Horsepower 11.5 hp (8gpm) / 17.5 hp (12gpm) Hydraulic Supply 8 gpm (30 liters/min.) / 12 gpm (45 liters/min.) 2500 psi (172.5 bar) Noise Level 88dB at 3 feet (approx. 1m) Vibration Level 4 meters/second 2 (front handle) Water Supply Minimum 20 psi (1.5 bar) Weight 27.3 lbs. (12.4kg) with 15-inch bar and chain Available bar lengths 10 inches (25cm) 15 inches (38cm) 20 inches (50cm) 25 inches (63cm) 814PRO SPECIFICATIONS: Hydraulic Supply Flow (max): 8 gpm (30 liters/min.) Can be used with higher flow systems ONLY with flow adapter (ICS part number 70350) Pressure (max): 2500 psi (172.5 bar) Valve: Open center Water Supply Minimum 20 psi (1.5 bar) Weight 15 lbs. (6.8kg) with 13-inch bar and chain Available Bar Lengths 13 inches (32cm) Chain Speed 4950 fpm (25m/s), free running Pigtails Dimensions 18 inch length 18 inches (46cm) Length 1/2 inch diameter 10 inches (25cm) Height 2,500 psi working pressure 8 inches (20cm) Width Sprocket Connectors 7 tooth rim with e-clip HTMA 1/2-inch Flush-Face Noise Level Vibration Level 88dBA@ 3 feet (approx. 1m) 3.5 meters/second 2 (front handle) TSS Total Slurry Solutions The 814PRO Hydraulic Saw comes equipped to accept the ICS TSS attachment. This allows you to capture the slurry with a Hi-Lift Performance Vacuum System also available from ICS

53 POWER PACK / CHAINSAW ACCESSORIES P95 POWER PACK The ICS Multiflow Powerpack is a dependable self-contained source of hydraulic power that is easily transportable to any jobsite. You can set the flow rate to either 5 gpm or 8 gpm to power the ICS 880F4, 814PRO hydraulic chainsaw, or a wide variety of other hydraulically powered equipment. FEATURES: Self-Contained. Superior Cooling Easily Transportable. (5 hp heat rejection). Versatile. Auto-idle capable. Adjustable. Ergonomic design for ease of use. Keyless Electric Starting. Engine over-speed shut-down. Large pneumatic tires. Low oil shut-down. Lifting handles and eyes. Easier hydraulic tank removal. Larger fuel capacity. Easier fuel tank removal. Tool circuit lock-out Load compensating hydraulic flow. during start-up. SPECIFICATIONS: Multiflow Hydraulics 8 gpm (30 liters/min.) at 2,500 psi (172 bar) 5 gpm (20 liters/min.) at 2,500 psi (172 bar) Engine 18 horsepower V-Twin, air cooled Briggs & Stratton Model Gasoline, 85 Octane Fuel Capacity: 7 gal. (27 liters) Hydraulic System Reservoir: 3 gal. (11 liters) Relief valve setting: 2,100-2,300 psi ( bar) Full relief setting: 2,500 psi (172 bar) Hydraulic oil: SAE 10WT Dimensions Length: 36 inches (91cm) Width: 23 inches (58cm) Height: 29.5 inches (75cm) Weight 330 lbs. (150kg) DIAMOND CHAINS AND GUIDEBARS All ICS diamond chains come with patented o-ring technology inserted within each connecting link to minimize water and improve lifetime. MAX SERIES DIAMOND CHAINS Best value for the everyday user. Patented bumper design for smooth cutting performance. MAX series diamond chains are designed to be the best general purpose chains for ICS brand gas concrete saws. PRO SERIES DIAMOND CHAINS Maximum performance for the professional concrete cutter. Engineered for the highest possible performance, these are the chains the PRO Cutters prefer. GUIDEBARS Genuine ICS guidebars, replacement parts and other accessories keep you cutting at peak efficiency. 3 P95 DIAMOND CHAIN SELECTION CHART Soft Abrasive/ Natural Stone Medium Concrete/ Hard Concrete/ Brick Light Reinforcement Heavy Reinforcement TwinMAX TwinMAX Plus TwinMAX Abrasive ProFORCE ProFORCE L ProFORCE S ProFORCE Abrasive ProFORCE Corner* TwinPRO SoftPRO PremiumPRO *For use by professional concrete cutters for chasing corners only. PRO FORCE4 MAX SERIES SERIES SERIES

54 HYDRAULIC POWER UNITS / PUMPS / SAWS / BREAKERS The HydraPak HydraPaks are powerful, portable hydraulic power units that operate more efficiently and with less noise than other types of power systems. HydraPaks are easily transported to the jobsite in the back of a pickup truck or van. Compact, lightweight hydraulic power source for RGC Hydraulic tools. Easy maintenance and parts replacement. Detachable handles for easy transporting and storage. Lifting hook and 6-gallon oil reservoir. Controls easily accessible for safety and comfort. Cart mounted with large 16" pneumatic tires for easy transporting. GAS HYDRAPAK FEATURES Electric start and low oil shutdown on all models. Powder-coated tubular steel frame protects unit from damage. Heavy-duty 8-tube heat exchanger on most models. HV1855, HV1858 and HV1810 are equipped with an 18 hp B & S Vanguard gas engine with Performance Control electronic governor. ELECTRIC HYDRAPAK FEATURES Controls and handles located at convenient height. 10 hp, 60 hz Baldor electric motor. Model HE 1058 and HE1010 Hydraulic Saw FEATURES 14", 16", 20" and 24" models available. Cuts concrete, stone, brick, block, pipe, reinforced concrete, steel beams and other aggregates quickly and cleanly. Cutting depths of 5-1/4" to 9-1/2". Lightweight, rugged steel tube construction is lighter than gas saws. Heavy-duty protective guard meets ANSI standards. Dual function trigger for automatic wet cutting. Accepts Abrasive or Diamond blades. HydraCart and SawCart models available. Trigger lockout for operator protection. Use inside or outside - No exhaust pollutants. Heavy-duty hydraulic motor for constant cutting speed under load. Can be used underwater. Model S14 Blade Size: 14 in. (35.5 cm) Cutting Depth: 5-1/4 in. (13.3 cm) Blade Speed (max.): 4100 rpm Flow: 5-8 gpm (20-30 lpm) Oil Pressure Range: psi ( bar) Weight: 28 lbs. (12.7 kg) Hydraulic Breaker OUTSTANDING FEATURES Higher performance-to-weight ratio than other hydraulic and pneumatic breakers. Lighter weight and more portable than pneumatic systems. New ergonomic handles are standard on HB37E, HB47E, HB70E and HB89E to reduce operator fatigue and increase productivity. Alternative noses available to accept different size tools. Powered by the RGC HydraPak or other compatible power source. Superior distributor system in the HB47E, HB70E and HB89E further improves efficiency and dependability. Absence of noise and dust producing exhaust delivers cleaner, quieter and more efficient operation. Continuous component lubrication reduces wear, minimizes maintenance and extends product life. Hose whips and moil points included. HydraPumps Small overall size allows for use in very tight spaces. Small hole strainer available for the S3T model. Built-in lifting eye/handle provides method to carry, lift and lower. Proven, durable design for years of use. Cast aluminum pump body. Self-lubricating design. Totally submersible. Self-priming. Designed to consistently pump large volumes of liquids, these compact units are ideal for pumping out vaults, trenches, ditches, ponds, tanks, pools, etc. HB70E HydraBreaker Weight Class: 70 lb. Weight: 69.4 lbs. (31.5 kg) Length: 29" (738 mm) Steel Size Standard: 1-1/4" x 6" (32 x 152 mm) Steel Size Optional: 1-1/4" x 6-1/4" (32 x 160 mm) Impact per Minute: 1270 Impact Force: 81 ft.-lbs. (110 J) Maximum Flow: 5 gpm (20 lpm)* Pressure: 2000 psi (138 bar) Max. Back Pressure: 215 psi (15 bar) *Consult factory for optional 8 gpm flow. Model: S2TCAL-2 S3T Pump Capacity: 125 gpm (473 lpm) 390 gpm (1476 lpm) Pressure Max: 2500 psi (170 bar) 2500 psi (170 bar) Flow: 5 gpm (19 lpm) 8 gpm (30 lpm) Operation: Open Center Open Center Max. Lift: 210 ft. (64 m) 75 ft. (22.9 m) Discharge Size: 2 in. NPT (female) 3 in. NPT (female) 5.8 cm Outlet 7.6 cm Outlet Pump Diameter: 9-3/8 in. (24 cm) 11-3/4 in. (30 cm) Max. Back Pressure: 200 psi (14 bar) 100 psi (7 bar) Semi-solids (Max.): 1 in. (2.5 cm) 2-1/2 in. (6.4 cm) Couplings: 1/2 in. HTMA Flush-Face 1/2 in. HTMA Flush-Face Weight: 17 lbs. (7.7 kg) 34 lbs. (15.4 kg)

55 HYDRAULIC BREAKERS BX & BXR SERIES Hydraulic Breakers FEATURES and BENEFITS: Oil Regeneration System The effective oil regeneration system on the BXR Series traps hydraulic oil used in the downward stroke of the piston and uses this oil to assist in lifting the piston for the next blow. This design boosts blow speed without the need for additional flow, resulting in higher production rates. Manual High Speed Selection BX8 to BX30 breakers are equipped with a manual high or low speed select located on the breaker. Switching to high speed allows for improved production rates in softer material such as concrete. The BX40 is equipped with a hydraulic pilot operated two speed control which is operated from the parent carrier by the operator. Long / Short Stroke Selection Operator controlled long or short stroke selection on the BXR Series maximizes production rates by selecting between high impact (long stroke)and high frequency (short stroke) modes via hydraulic piloted stroke control. Consistent Blow Energy The high volume nitrogen chamber and extra long stroke piston design reduces pressure fluctuations in the hydraulic circuit providing consistent blow energy and recoil energy absorption. Anti-Blank Fire An anti-blank fire interlock prevents the blank fire of the tool, thereby reducing shock loading to the retaining pins and front head. Remote Greasing A remote located greasing port situated near the top of the breaker close to the main hydraulic circuit provides a convenient interface to carrier-mounted remote greasing systems, the use of which contributes to breaker longevity. Exceptional Silence and Structural Integrity The boxed section housing provides excellent strength, while remaining lightweight. The suspended boxed housing design reduces vibration to the carrier without metal-to-metal contact. Narrow Front Head The narrow box-housing design is well suited to tight trenching conditions. The narrow profile allows optimum visibility and access when working in tight quarters. BX4 BX6 BX8 BX10 BX15 BX20 BX30 BX40 Energy Class ft.-lbs. (Joules) 400 (542) 600 (814) 800 (1,085) 1,000 (1,356) 1,500 (2,034) 2,000 (2,712) 3,000 (4,068) 4,000 (5,423) Operating Weight 419 (190) 439 (199) 734 (333) 950 (431) 1,354 (614) 2,048 (929) 2,665 (1,209) 3,832 (1,738) (including top bracket) lbs. (kg) Overall Length (including top bracket) in. (mm) 53 (1,352) 54 (1,380) 63 (1,603) 71 (1,805) 78 (1,981) 88 (2,225) 97 (2,455) 109 (2,764) Oil Flow Range gpm (lpm) 7-11 (25-40) 8-13 (30-50) 8-15 (30-55) (45-80) (50-100) (90-110) ( ) ( ) Working Pressure Range psi (bar) 1,280-1,707 (90-120) Blow Rate bpm High Speed bpm n/a 1,280-1,707 (90-120) 400-1,000 n/a 1,422-1,991 ( ) ,000 1,422-1,991 ( ) ,000 1,422-1,991 ( ) ,707-2,276 ( ) ,707-2,418 ( ) ,849-2,418 ( ) Tool Diameter in. (mm) 2.1 (53) 2.4 (62) 2.8 (70) 3.1 (78) 3.3 (85) 4.1 (105) 4.7 (120) 5.3 (135) Recommended Carrier Weight ton (kg) (2,650-8,800) (6,600-9,900) 3-8 6,600-17,600) 5-8 (11,000-17,600) 6-9 (13,200-19,800) (22,000-33,100) (35,300-44,100) (39,700-55,100) 3 BXR50 BXR65 BXR85 BXR100 BXR120 BXR160 Energy Class ft.-lbs. (Joules) 5,000 (6,800) 6,500 (8,813) 8,500 (11,524) 10,000 (13,558) 12,000 (16,290) 16,000 (21,693) Operating Weight 4,200 (1,905) 4,860 (2,204) 6,500 (2,948) 7,800 (3,538) 9,050 (4,105) 12,400 (5,625) (including top bracket) lbs. (kg) Overall Length 107 (2,704) 114 (2,903) 133 (3,368) 137 (3,481) 143 (3,618) 160 (4,059) (including top bracket) in. (mm) Oil Flow Range gpm (lpm) ( ) ( ) ( ) ( ) ( ) ( ) Working Pressure Range psi (bar) 2,150-2,700 ( ) 2,150-2,700 ( ) 2,150-2,700 ( ) 2,150-2,700 ( ) 2,150-2,700 ( ) 2,150-2,700 ( ) Blow Rate Long Stroke* Short Stroke* Tool Diameter in. (mm) 5.5 (140) 5.9 (150) 6.3 (160) 6.7 (170) 7.1 (180) 7.9 (200) Recommended Carrier Weight ton (kg) (37,500-66,100) (41,900-88,200) *Speeds can increase up to 20% with the oil regeneration system (61, ,225) (74, ,900) (92, ,600) (121, ,500)

56 AIR COMPRESSORS M50 / M57 / M64 Standard Features: Heavy-duty Kobota turbo diesel engines that comply with Tier 4 emission standards. Large fuel tank for extended operation. Convenient tool box for storage. Galvanized enclosure. Available skid-mounted. M50 M100 Spacious, weatherproof tool box. M64 Large tool box holds two 90 lb. breakers M57 Large tool box holds two 90 lb. breakers M122 Modulation control. M100 / M122 / M200 / M270 Standard Features: Heavy-duty diesel engines that comply with Tier 3 emission standards. Heavy-duty steel chassis. Fully galvanized enclosure. Tool boxes for convenient storage. Modulation control. Available skid-mounted. M200 Lockable access doors and instrument panel. M270 Lockable access doors and instrument panel. Liquid cooled turbocharged diesel engine Compressor M50 M57 M65 M100 M122 M200 M270 Free air delivery 185 cfm 210 cfm 225 cfm 375 cfm 400 cfm 750 cfm 950 cfm Working pressure 100 psig 100 psig 100 psig 100 psig 100 psig 100 psig 100 psig Diesel Engine Kubota V1505-T IDI Kubota V2403 Kubota V2403T Kubota V3800 Deutz TCD2012L4 Caterpillar C6.6 Acert Mercedes Benz OM501LA Power at full load 41 hp 47.2 hp 58.8 hp 90 hp hp hp 313 hp Full load speed 3000 rpm 2600 rpm 2700 rpm 2600 rpm 2300 rpm 1950 rpm 1700 rpm Off load running speed 2200 rpm 1800 rpm 2000 rpm 1800 rpm 1600 rpm 1200 rpm 1200 rpm Fuel tank capacity 21 gal. 28 gal. 28 gal 40 gal. 50 gal. 70 gal. 146 gal. Weight, dry 1555 lbs 2260 lbs lbs lbs lbs 7055 lbs lbs. Weight, wet 1643 lbs lbs. Sound Level Max 76 db(a) at 23' 73 db(a) at 23' 70 db(a) at 23' 76 db(a) at 23' 76 db(a) at 23' 72 db(a) at 23' 70 db(a) at 23' Outlets (2) 3/4" - (1) 1" (3) 3/4" - (1) 1-1/2" (3) 3/4" - (1) 1-1/2" (3) 3/4" - (1) 2" Dimensions L x W x H* 130" x 55" x 49" 139" x 68" x 60" 144" x 68" x 56" 159" x 70" x 59-1/2" 185" x 74" x 63" 234" x 82" x 82" 232" x 81" x 104" * Includes tow bar

57 Tamco, Inc. BREAKERS / TAMPERS / CHIPPERS / DEMOLITION HAMMERS Toku Rock Drills Drilling through rock, concrete or brick, Tamco offers a rock drill that will fit your distinct requirements. TS pound class rock drill features rugged construction and designed for larger diameter bits and deeper drilling jobs. TJ-20 and TJ-15 are mid-sized rock drills. Great for road building, shaft sinking, quarrying, as well as general demolition or construction work. Include removable inline oilers. THD-1100N is a lightweight D-handled drills that is able to get into smaller spaces other drills cannot. All tools feature replaceable chuck bushings, drop forged alloy steel construction, and forged latch retainers. Mufflers are available for the TS-55, TJ-20 and TJ-15 models. TJ-20 and TJ-15 models include Clear-View inline oilers. TS-55 Rock Drill TS-55 TJ-20 TJ-15 THD-1100N Shank Size 7/8" x 3-1/4", 7/8" x 4-1/4" 7/8" x 3-1/4", 7/8" x 3-1/4", 7/8" x 3-1/4" 1" x 4-1/4" 7/8" x 4-1/4" 7/8" x 4-1/4" Stroke Length 2-9/16" 1-15/16" 1-3/4" 1-7/32" Piston Diameter 2-5/8" 2-11/16" 2-1/8" 1-1/2" x 7/8" Impact Rate B.P.M. 1,800 2,400 2,450 3,200 Rotation 200 R.P.M. 200 R.P.M. 250 R.P.M. 350 R.P.M. Weight 59.4 lbs lbs lbs lbs. Overall Length 22-3/8" 24-1/32" 18-1/2" 16-17/32" Air Consumption C.F.M C.F.M. 56 C.F.M. 28. C.F.M. Air Inlet 3/4" NPT 3/4" NPT 3/4" NPT 3/8" NPT Hose Size 3/4" 3/4" 3/4" 1/2" TJ-15 Toku Paving Breakers 30, 40, 60 and 90 pound classes. Rugged four bolt backhead, drop forged alloy steel construction, forged latch retainers, replaceable chuck bushings and safety triggers. Optional mufflers are available. 30 and 40 pound hammers are the perfect size and weight for light to medium construction. They work great for demolishing blacktop, masonry walls, bridge decks, or digging in frozen soil. Toku 60 and 90 pound breakers are designed with the larger demolition jobs in mind. PB-30 Toku Tamper Features heat treated alloy steel cylinder, innovative features and rugged construction. Optional steel or rubber heads are available for the Toku tamper. Paving Breakers PB-90 PB-60 PB-40 PB-30 Shank Size 1-1/8" x 6", 1-1/4" x 6" 1-1/8" x 6", 1-1/4" x 6" 1" x 4-1/4" 7/8" x 3-1/4", 7/8" x 4-1/4" 1" x 4-1/4" Stroke Length 6" 4" 5-3/4" 3-11/32" Piston Diameter 2-5/8" 2-1/4" 1-3/4" 1-3/4" Impact Rate B.P.M. 1,250 1, ,550 Weight 92.4 lbs 66 lbs lbs. 33 lbs. Overall Length 28-1/2" 25-3/8" 26" 22-1/4" Air Consumption 77 C.F.M. 70 C.F.M. 56 C.F.M. 49 C.F.M. Air Inlet 3/4" NPT 3/4" NPT 1/2" NPT 3/8" NPT Hose Size 3/4" 3/4" 3/4" 1/2" PB-60 Tamper Jet-06 Bore 1-1/2" Stroke Length 5-1/2" Length 49" Weight 39.6 lbs. Air Inlet 1/2" Butt Diameter 6" Air Consumption 35.2 C.F.M. 3 Toku Chipping Hammers The AA-0S is small on size but big on power. The Toku THA series of gooseneck chipping hammers are available in 1" through 4" stroke lengths. Saw tooth connection between the handle and cylinder provides a more secure, positive fit. Alloy steel drop forged handles, replaceable bushings, heat treated cylinders, reliable ring valve design and exhaust deflectors. Rugged TCH series of "D-Handle" chipping hammers are available in 2" through 4" stroke lengths. Features drop forged handles, replaceable bushings, heat treated alloy cylinders, and exhaust deflectors. A rock solid four bolt handle for maximum reliability and durability which allows a sure grip in all conditions. Optional quick connect retainers are available for all TCH chipping hammers. Chipping Hammer AA-OS THA-1B THA-2B THA-3B THA-4B TCH-2 TCH-3 TCH-4 Shank Size.580" Hex or.680" Round Shank Stroke Length 1.8" 1" 2-3/32" 2-17/32" 4-1/32" 2" 2-1/2" 4" Piston Diameter 0.88" 1-1/8" 1-1/8" 1-1/8" 1-1/8" 1-1/8" 1-1/8" 1-1/8" Impact Rate B.P.M. 3,000-3,200 2,500 2,300 2,200 1,800 2,600-2,800 2,000-2,200 1,600-1,800 Weight 7.9 lbs. 13 lbs lbs. 15 lbs lbs. 18 lbs. 19 lbs. 20 lbs. Overall Length 12.8" 15-9/32" 16-1/4" 17-23/32" 18-29/32" 14-3/4" 16" 17" Air Consumption C.F.M. 28 C.F.M C.F.M C.F.M C.F.M C.F.M C.F.M C.F.M. 7/8" x 24 7/8" x 24 7/8" x 24 Air Inlet 3/8" NPT 3/8" NPT 3/8" NPT 3/8" NPT 3/8" NPT Threads/Inch Threads/Inch Threads/Inch Hose Size 1/4" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" Repair parts available. AA-OS TCH-3 THA-3B

58 POWER TOOLS We carry a full line of Hitachi power tools. These are just a few... NAILERS CIRCULAR SAW NR90AD NR90AE NR90GR C7BMR 7-1/4" SPECIFICATIONS NR90AD NR90AE NR90GR Fastener Type Clipped Head, Full Round Head, Full Round Head, Paper Strip Collation Plastic Strip Collation Plastic Strip Collation Magazine Angle 35 Degrees 21 Degrees 20 Degrees Fastener Length Capacity 2" - 3-1/2" 2" - 3-1/2" 2" - 3/12" Fastener Diameter Range 0.113" to 0.148" 0.113" to 0.148" " Magazine Capacity (0.131") 86 (0.131") Nails Magazine Loading Rear Rear Rear Air Inlet 3/8" NPT Thread 3/8" NPT Thread - Operating Pressure psi psi - Depth Setting Tool-less Tool-less Allen Wrench Actuation Selective Selective - Length 18-3/8" 18-3/16" 14-1/4" Width 4-29/32" 4-29/32" 4-1/4" Height 12-11/16" 12-11/16" 13-29/32" Actual Weight 7 lbs. 7.5 lbs. 7.9 lbs. Battery V Battery Life - - 4,000 Nails Fuel Rod Life - - 1,200 Nails Feeder Step SPECIFICATIONS C7BMR Amps 15 No-Load Speed 5,800 rpm Full-Load Torque 1.72 ft./lbs. Cutting Depth - 90Degrees 2-3/8" Cutting Depth - 45 Degrees 1-27/32" Cutting Depth - 50 Degrees 1-11/16" Cutting Depth - 55 Degrees 1-17/32" Electric Brake Yes Base Materials Aluminum Die-Cast Soft Grip Handles Yes Bevel Adjustment Lever Bevel Capacity 55 Degrees Weight 10.5 lbs. RECIPROCATING SAW 7" GRINDER G18MR with IDT Technology SPECIFICATIONS G18MR Power Source AC Single Phase, 50 or 60Hz Voltage and Power Input 120V, 15Amp, 2,400W Power Output 980W Max. Power Output 3,500W No-Load Speed 6000 rpm Type of Motor AC Single Phase Commutator Enclosure IDI-Internal Double Insulation Type of Switch Trigger No-Load Noise Level 88dB Spindle Thread 5/8" x 11 Spindle Lock Yes Length 19-3/8" Weight 11.9 lbs. H55SCK 3/4" Hex Demolition Hammer H90SB 1-1/8" Hex Demo Hammer H60MRV Demolition Hammer SPECIFICATIONS CR13V Amps 10 No-Load Speed 0-2,800 SPM Stroke Length 1-1/8" Keyless Blade Clamp Yes Tool Length 17-1/8" Tool Weight 7.3 lbs. BREAKERS CR13V SPECIFICATIONS H55SCK H60MRV H90SB Shank Hex SDS Max - Amps Impact Rate 1450 bpm bpm Impacts/Min (Full Load) ,650 - Impact Energy 11.8 ft./lbs ft./lbs ft./lbs. Side Handle Degree - Chisel Rotation N/A VLM, 12 Angles N/A Power Input 1140W 1,350W 1330W Tool Length 22-1/4" 22-43/64" 34-23/32" Tool Weight 24.3 lbs lbs lbs. HAMMER DRILLS DH40MR DH38YE DH50MB SPECIFICATIONS DH38YE DH40MR DH50MB Shank Spline SDS Max SDS Max Chuck Size 1-1/2" 1-9/16" 2" No-Load Speed 380 rpm rpm rpm Impact Rate 2800 bpm bpm bpm Impact Energy 5.2 ft./lbs. 7.4 ft./lbs ft./lbs. Amps Capacity: Drill Bit 1-1/2" 1-9/16" 2" Capacity: Core Bit 4-1/8" 4-1/8" 6-1/4" Modes of Operation Hammer/Hammer & Drill Hammer/Hammer & Drill Hammer/Hammer & Drill Switch Electronic EVS EVSR Handle Type D D D Full Load Vibration db - No-Load Noise Level db - Power Input 870W 950W 1400W Tool Length 17-15/16" 17-1/8" 19-1/2" Tool Weight 17.0 lbs lbs lbs

59 GRINDERS / DRILLS HAMMER DRILLS KHE-D 24 KHE-D 28 KHE 56 Torque 106 in.-lbs. 177 in.-lbs. 796 in.-lbs. Drill diameter in - in concrete w/solid bits 1" 1-1/8" 1-3/4" - in mild steel 1/2" 1/2" 1-1/8" - in softwood 1-3/16" 1-9/16" 2-9/16" - Concrete w/core bits 4" No-load speed /min /min. 450 /min. Rated input watts Max. impact rate 4600 /min /min /min. Max. single impact energy 2.2 J 2.5 J 14 J Weight (without mains cable) 7.4 lbs. 8.1 lbs lbs. Length 16-3/4" 18" 18" KHE 56 KHE-D 24 WEP Quick Deadman Electronic 6" Angle Grinder/Cut-off Machine with non-locking paddle switch. WP8-115 Quick 4-1/2" Angle Grinder with Non-Locking paddle switch. GRINDERS WP Quick WEP Quick Grinding wheel 4-1/2" 6" Torque 19.5 in.-lbs. 31 in.-lbs. No-load speed 10,000 /min. 9,000 /min. Rated input power 800 W 1400 W Spindle thread 5/8" /8" - 11 Weight 5.3 lbs. 6.1 lbs. 3 CORDLESS DRILLS SB 18 LT SSD 18 LT Type of battery pack/voltage Li-Ion/18 V Li-Ion/18 V Capacity of battery pack 2.6 Ah 2.6 Ah Max. impact rate /min. level 1 / 2 / /2700/3300 /min. Max. torque 239 in.-lbs. soft/ level 1 / 2 / 3 708/1106/ 549 in.-lbs. hard 1416 in.-lbs. Drill diameter in - Concrete 1/2" - Steel 1/2" - Wood 1-3/16" No-load speed / /min level /min. level /min. level /min. Drill spindle thread 1/2" -20 UNF Bit retainer Hexagon recess 1/4" (6.35mm) Chuck capacity 1/2" Weight (w/battery pack) 4.4 lbs. 4 lbs. SB18 LT 18V Hammer Drill/Driver SSD18 LT 1/4" Hex Impact Driver

60 UTILITY KNIVES / PIPE WRENCHES ProTouch Retractable Knife Quick change mechanism allows for easy blade removal without opening the knife. Smooth, three-position slide provides increased durability for frequent use. Easy tool-free entry with push button operation opens the knife and exposes replacement blades. Features inside storage for up to 5 blades. Includes 3 IRWIN BLUE BLADE Bi-Metal Utility Blades. ProTouch Fixed Knife ProTouch ergonomic grip. Optimized cutting angle for reduced fatigue. Easy tool-free entry. Features inside storage for up to 5 blades. Includes 6 IRWIN BLUE BLADE Bi-Metal Utility Blades. Standard Safety Knife Self-retracting spring action returns blade safely into the housing when not in use. Interlocking nose reduces blade wobble. Ergonomic grip fits comfortably in the hand. Two blade positions 2mm extension for box cutting and full extension for general use. Tool-free entry. Item No Item No Item No Bi-Metal BLUE BLADE Utility Blades Features patented Bi-Metal technology that sets new standards of performance. UNBREAKABLE: Spring steel body delivers superior flexibility to prevent breaking (under normal working conditions). LASTS LONGER: High speed steel cutting edge stays sharp longer than traditional carbon utility blades (tested on 20 lb. recycled paper). Fits most utility knives. Item No Pack IRWIN BLUE BLADE Bi-Metal Utility Blades Quick Adjusting Pipe Wrench The Quick Adjusting Pipe Wrench is built with convenience and durability in mind. One-handed operation enhances user s speed and convenience. Ratchets quickly to work surface. Smooth release upon job completion. Broached teeth are ideal for most surfaces including black, galvanized, PVC and copper pipe, as well as nuts, bolts and couplings. 43% less weight than standard 14" cast iron pipe wrenches. Ergonomic handle ideal for heavy torque and maximum comfort. Riveted to heat treated steel body. Jaw Item No. Capacity Length /4" 11" Cast Iron Pipe Wrench Constructed from the highest grade cast iron, forged and heat treated to ensure maximum durability. Unique hammer head design provides a flat surface for hammering. Easy-spin adjusting nut is heat-treated for durability. Wide I-beam handle design provides better weight distribution. Drop-forged jaw is heat-treated to resist distortion or breakage. Hardened teeth provide tremendous bite. Housing constructed of heavy-duty cast iron. Jaw Item No. Capacity Length /2" 10" " 14" /2" 18" " 24" " 8" " 12" " 36" " 48" Cast Aluminum Pipe Wrench Heavy-duty cast aluminum housing is 40% lighter than cast iron and easier to maneuver. I-Beam handle and wide design provide better weight distribution. Drop-forged jaw is heat-treated to resist distortion or breakage. Easy-spin adjusting nut is heat-treated for durability. Hammer head design provides a flat surface for hammering. Features a Lifetime Guarantee. Pipe Item No. Capacity Length /2" 10" " 12" " 14" /2" 18" " 24" " 36" " 48"

61 PIPE CLAMP / METAL AND MASONRY DRILL BITS Quick-Grip Pipe Clamps Innovative clutch system eliminates the need for threaded pipe. Larger feet offer more stability and clearance between handle and worktop. Larger, more ergonomic handle offers easier clamping with reduced hand fatigue. Larger clutch plates allow for easier release and increased durability and dependability. Item # Throat Depth Pipe Size /2" (37 mm) 1/2" (12 mm) /8" (47 mm) 3/4" (19 mm) Metal Drilling Bits Black & Gold HSS Fractional Straight Shank Jobber Length Drill Bits Black & Gold HSS Fractional 3/8" Reduced Shank Jobber Length Drill Bits Laser-etched markings for easy identification. High Speed Steel features a black shank and gold flute. Heavy-duty web construction for strength and durability. 135Â split point begins drilling immediately, minimizing bit walk. 3-Flatted shank on 3/16" and above for better chuck grip. Provides accurate drilling without a center punch. Item # Size Twist Length Overall Length B 3/64" 3/4" 1-3/4" B 1/4" 2-3/4" 4" B 15/64" 2-5/8" 3-7/8" B 7/32" 2-1/2" 3-3/4" B 13/64" 2-7/16" 3-5/8" B 3/16" 2-5/16" 3-1/2" B 11/64" 2-1/8" 3-1/4" B 5/32" 2" 3-1/8" B 9/64" 1-3/4" 2-7/8" B 1/8" 1-5/8" 2-3/4" B 7/64" 1-1/2" 2-5/8" B 3/32" 1-1/8" 1-1/4" B 5/64" 1" 2" B 1/16" 7/8" 1-7/8" B 17/64" 2-7/8" 4-1/8" B 9/32" 2-15/16" 4-1/4" B 19/64" 3-1/16" 4-3/8" B 5/16" 3-3/16" 4-1/2" B 21/64" 3-5/16" 4-5/8" B 11/32" 3-7/16" 4-3/4" B 3/8" 3-5/8" 5" B 25/64" 3-3/4" 5-1/8" B 13/32" 3-7/8" 5-1/4" B 27/64" 3-15/16" 5-3/8" B 7/16" 4-1/16" 5-1/2" B 29/64" 4-3/16" 5-5/8" B 15/32" 4-5/16" 5-3/4" B 31/64" 4-3/8" 5-7/8" High Speed Steel features a black shank and gold flute. Heavy-duty web construction for strength and durability. 135Â split point begins drilling immediately, minimizing bit walk. Accurate drilling without a center punch, for general metal drilling. Item # Size Twist Length Overall Length B 25/64" 3-3/4" 5-1/8" B 13/32" 3-7/8" 5-1/4" B 27/64" 3-15/16" 5-3/8" B 7/16" 4-1/16" 5-1/2" B 29/64" 4-3/16" 5-5/8" B 15/32" 4-5/16" 5-3/4" B 31/64" 4-3/8" 5-7/8" B 1/2" 4-1/2" 6" Masonry Drill Bits Moil Point Flat Chisel Scaling Chisel Wide Scaling Chisel Bush Tool - 1-Piece Ground Rod Driver Clay Spade 3 Asphalt Cutter

62 MASONRY DRILL BITS Patented flute design. Patented carbide tip. Short drill head. 2X longer life than traditional masonry bits. Maximized flute for faster, more efficient dust removal. 2X more carbide in tip for 2X longer drilling life in rebar-reinforced concrete. Optimal groove design minimizes friction for increased speed and longer life. Blue power ring for easier identification in the toolbox. Premium steel improves core strength for maximum durability and extended life. SDS-max Standard / Multi-Cutter Spline Standard / Multi-Cutter Fits all spline rotary hammers. Patented flute geometry removes dust from the hole quicker for fast drilling and long life. Shot-peened, double-tempered finish reduces breakage. Copper braze material gives high heat resistance for reduced tip loss. All tips made to ANSI specifications. Chrome vanadium shaft through-hardened to 50-53HrC. Fit all SDS-max and Hilti TE F/G and Y rotary hammers. Patented flute geometry removes dust from the hole quicker for fast drilling and long life. Shot-peened, double-tempered finish reduces breakage. Copper braze material gives high heat resistance for reduced tip loss. All tips made to ANSI specifications. Chrome vanadium shaft through-hardened to 50-53HrC. Core Bit Spline Shank Fit all spline rotary hammers. Delivers power to the tips more efficiently than 2-piece designs. Reduces breakage and other problems associated with 2-piece designs. Maximum drilling depth is 2-5/8". Core Bit SDS-max Shank Fit all SDS-max and Hilti TE F/G and Y rotary hammers. Delivers power to the tips more efficiently than 2-piece designs. Reduces breakage and other problems associated with 2-piece designs. Maximum drilling depth is 2-5/8". Multi-Material Bits SDS-plus Standard / Hex Drive / Multi-Cutter Fits all SDS-plus and Hilti TE-C rotary hammers. Reduced area above the flute prevents the drill bit from binding while drilling the full usable length can be utilized. Chrome vanadium shaft through-hardened to 50-53HrC. Patented tip and flute design removes dust more efficiently up to 25% faster than other bits. Shot-peened, double-tempered finish reduces breakage. Hot isostatically pressed to extend life and resist breakage. Copper braze material gives high heat resistance for reduced tip loss. All tips made to ANSI specifications. Designed to drill in multiple materials including brick, block, tile, metal, wood, plastic and marble. Rotary Percussion - Straight Shank Rotary Drill Bits Glass and Tile Masonry Drill Bits Fits all hammer drills with 3-jaw or Jacobs chuck. Chrome vanadium shaft through-hardened to 50-53HrC. Patented flute geometry removes dust from the hole quicker for fast drilling and long life. Up to 150% faster than other competitive bits. Shot-peened, double-tempered finish reduces breakage. Hot isostatically pressed to extend life and resist breakage. Copper braze material gives high heat resistance for reduced tip loss. All tips made to ANSI specifications

63 Forms Ties & Accessories Nail Stakes & Pins Curb & Gutter Forms Concrete Texture Mats Color Hardener Concrete Stain Concrete Forming & Accessories 2 CONCRETE ACCESSORIES Curing, Sealants and Form Release Joint Filler Waterproofing Bar Supports Bridge Hangers Light Forming Accessories Medium/Heavy Forming Accessories Wire innovating concrete construction PRECISE FORMS, INC. 41

64 CONCRETE FORMING SYSTEM UNI-PLY Multi-Purpose Handset Form System UNI-PLY PANEL DETAILS PSI 1000 MAX Exact corner joints eliminate tolerance build-up over large areas. Standard 220/220 Xact 2 form* Birch Plywood is riveted to the angle struts. The mill quality system is certified according to the international standard ISO 9001, and meets or exceeds the following international standards: PSI-95 United States of America, BFU 100 DIN Germany TU, , STP Eastern Europe. Side and end rails are rolled form 55,000 psi steel and welded continuously at corners for maximum strength. Angle struts are spaced on 12" centers to provide strength, uniform concrete and minimize deflection. Handles are provided on panels for easy handling in setting and stripping forms. Two inch wide angle strut provides greatest frame and plywood strength on the market. Dado slots on face of form allow tie spacing at 12" on center. Rear, side and end rail dados are located at 6" on center to allow optimum accessory location. Front-side and rear-side rail contact points prevent grout seepage and permit true form alignment with adjacent panels. Rated for a 1000 lb./ft. 2 (psf) rating at a 2:1 safety factor. Metric forms available *Xact 2 form Plywood panels are designed for superior performance and appearance grade concrete forming. It is a 100% birch panel offering LONG and SHORT GRAIN face directional veneer in a multi-ply construction. 3 UNI-PLY PANELS AND FILLERS Available in wood, steel and job-built options (for odd dimensions) Description Width (inches) Height (feet) Panels 24 3, 4, 5, 6, 8, 9, 10 Fillers 4 to 22 3, 4, 5, 6, 8, 9, 10 Metal Fillers 1, 1.5, 2 3, 4, 5, 6, 8, 9, 10 Inside Corner 6x6, 4x4 3, 4, 5, 6, 8, 9, 10 Outside Corner 3, 4, 5, 6, 8, 9, 10 Filler Angles 3, 4, 5, 6, 8, 9, 10 Pilaster Panels 3, 4, 5, 6, 8, 9, 10 Culvert Forms 3, 4, 5, 6, 8, 9, 10 Inside & Outside Bay Corners 3, 4, 5, 6, 8, 9, 10 Hinge Corners 3, 4, 5, 6, 8, 9,

65 CONCRETE FORMING SYSTEM Universal offers a variety of Loop Ties and Accessories to use with your UNI-PLY Panel Handset System. Safety Factor on all ties: 2:1 HANDSET LOOP TIE Standard 1" breakback. Available in standard and heavy-duty load ratings. GANG SET LOOP TIE Longer in length. Standard 1 breakback. Available in standard and heavy-duty load rating. COIL COMBINATION TIE Available with snap tie or loop tie ends. This tie has a one end as a tie and other ad a coil insert. Used for adding thickness to an already standing wall. Used with drop-in coil anchor. BASE TIE No breakback. Used to span across the base to two opposite steel forms for the purpose of establishing the desire wall thickness. WALER TIE No breakback, loop end. Used to tie a z-tie holder and double wales to the steel forms when the wales are running vertically. HANDSET FLAT TIE Standard 1/2" breakback. Available in standard and heavy-duty load ratings. 2 WATER RESISTANT NEOPRENE WASHER Optional part applied to ties to help prevent water leakage down the length of the tie. Special combination ties available upon request. UNI-PLY ASSEMBLY ACCESSORIES Waler Brackets for alignment Basic Components Wedge Bolt Long Bolt One Piece Waler Clamp Z Tie Holder Bracket S Wedge Mini Brace Turnbuckles Straight or bent plate Scaffold Jack Bracket Also available through Universal: Strongback ties and j-hooks Gang form bolt Short bolt Gang waler rod and plate Plywood brace attachment plates Concrete hoppers and elephant trunks Form stripping bars Standard stakes and fence t-posts

66 PRECISE FORMS, INC. ALUMINUM FORMS Create fantastic looking walls every time with Precise Smooth Aluminum. Light weight, a 36"x96" is approximately 75 lbs. Corner gussets for support. Full line of fillers. Optional Set&Lok and Captive Pin. Specially designed siderails. Inset endrails. State of the art robotic welding. Precise Forms was the first company to introduce the thick face sheet which has become the market standard. Our specially designed side rail provides greater strength and durability to the form while protecting and supporting the face sheet. Precise Forms produces an aluminum form with an inset end rail that allows the sheet to inset. This inset end rail adds strength to the form and additional face sheet support without unsightly lines to the vertical form joints. Corner Gussets are used to strengthen the corners as well as to minimize concrete buildup thus providing a stronger, longer lasting form. Precise uses a serrated 4" channel bracing on all of our 6-12 hole pattern forms. This provides a better gripping surface on the wider cross members. Experienced Leader Precise Forms has been the leader in producing aluminum forms since Our forms are used for: Basements Retaining Walls Warehouses Apartments Factories Bridges Culverts Precast Screening Walls Offices Pumping Stations Storage Tanks Manure Pits Light Commercial... and much more!

67 FORMS Jaquith manufactures the high strength BMF Metal Forms or Metal Concrete Forms used to form concrete sidewalks, curbs and gutters, runways, roads, median barriers, bridge parapets and slabs for industrial, residential and commercial applications. All BMF forms are sheared, punched, assembled and welded with maximum strength and rigidity for easy setup, stripping and re-use-features that save a contractor money and greatly reduce construction time. Barrier Curbs Flexible Curb and Gutter Flexible Sidewalk Specialty Standard Paving Straight Sidewalk Super Curb and Gutter Super Flat Wide Base Taper Key CURB & GUTTER FORM Curb Face Form 2 Flexible Curb and Gutter Form Curb Back Form Full Division Plate Gutter Form Paving Forms Adjustable Height Form

68 CONCRETE ACCESSORIES NAIL STAKES & PINS / FLAT WORK FORMS ESSENTIAL TOOLS FOR EVERY CONTRACTOR Steel NAIL STAKES Features FOOTERS dee Nail Stakes have 12 spirally arranged nailing holes one inch on center, giving each stake EDGE FORMS CURBS & GUTTERS 24 prelocated nail entry points. No matter how FLATWORK the dee stake rotates or angles, you ll still find at least one hole that will allow you to firmly anchor the stake to the form board. Further, the 3/4" DIA. STANDARD STAKES hole keeps the nail in place during alignment, for general construction leaving both hands free to bring the form board 7/8" DIA HEAVY DUTY STAKES to the line and hammer the nail. for heavy construction Increase production boost profits LENGTHS: 12", 18", 24", 30", 36", 42", 48" Every dee Nail Stake saves 3 minutes or more & longer in form board installation. You can save 30 with each dee Nail Stake you use. A 24" dee Nail Stake will pay for itself in five uses or less. STAKE PULLERS Every dee Nail Stake has an average life of more than 200 uses, and their solid steel rigidity allows you greater stake spacing. dee Nail Stakes do away with splitting, twisting and The fastest way splintering and require only one nail per stake, to remove dee practically eliminating form board damage. Nail Stakes without damage is to use a dee Stake Puller. Steel FORM PINS for STEEL FORMS FLAT WORK FORMS (4", 5", 6", 7" high 10' long) Self-aligning steel forms that require no latching, locking or fitting, just slide the solid nose into the reinforced box end at any angle, drive the form pin thru the pocket, sock the wedge home and forming is complete. Two men can completely set up 1,000 feet of form, 500 feet of sidewalk, straight as a die, in two hours, ready for concrete Male Female TRANSITION FORM Straight to Flexible FLEXIBLE FORM CORNER FORMS Inside STRAIGHT FILLER FORM It s as simple as ABC and dee DIVISION PLATE COLD ROLLED SOLID STEEL NAIL STAKES CORNER FORM Outside STRAIGHT FORM Corner forms provide the ability to pour clean right angle corners for patios, pads and walkways. Filler forms provide the ability to connect forms for odd size pours. Radius forms prove the ability to pour serpentine walkways and circular structures. Slip-On Form Spreaders speed up form setting they automatically dimension the form. Just stake the forms to line on one side. To set the other side place a spreader at each end of a ten foot section, bring that form to line using the spreader as a template, lock it to the form pins and move the spreader ahead as forming continues. If Division plates are specified for cold joints, they are spaced as required. 4" to 12" high any length Flexible Forms are ideal for all types of radius forming. Only dee Flexible Forms have 7 stake pockets and wedges to insure positive radius forming and to prevent flows between the pockets. Angles attached to the ends of the forms and locked with the clamps keep the forms properly aligned at the joints. Forms 4" to 7" high have 7' single wedge pockets. dee Transition Forms provide an ideal way to make a smooth transition from straight forms to flexible forms. Always order in pairs, male and female. 12" 12" SIDEWALKS DRIVEWAYS PATIOS FOOTERS POOLS LANDSCAPING Form Ht. MALE Form Ht. FEMALE LOCKING CLAMP

69 CONCRETE ACCESSORIES STEEL FORMS, CURBS AND GUTTERS STEEL FORMS The most accurate method of forming for Curbs and Gutters dee Steel Curb and Gutter Forms are the most modern forms now in use in the construction industry. They are self-aligning, making form assembly faster and easier. No latching, locking or fitting is required. The only moving parts are the heavy-duty wedges that securely lock the forms in place on the form pins and keep them to line regardless of subgrades. dee Steel Curb and Gutter Forms can be set up and stripped easier and faster than any other form on the market. Three men can completely set up 1,800 feet of forms in two hours, ready for concrete, equal to 300 feet of form per man hour. 4 bolt holes in each rail provide for rapid, easy attachment of various forming accessories. 5 steel braces are welded to the curb face forms for maximum strength. Heavy steel angles welded at both ends of all forms provide a solid box end, completely eliminate end damage. Curb face forms slip into the hold down clips, no threading, wedging or locking; rapid stripping. Slip-on division plates drop over the rails at any position. Top spreaders lock the curb face form to the back face form. Hi-strength steel form pins will drive thru any subgrade, will absolutely hold the forms to line. Heavy-duty noses slide into the box ends for fast self-aligning form assembly without fitting, latching or locking. Smooth rails and faces, no slots or notches, concrete seepage is eliminated, fast easy finishing. Heavy duty pockets and wedges welded to the form securely lock the forms to 3/4" or 7/8" stakes. Intermediate braces are welded to all forms to provide maximum strength, eliminate form damage. Double flanges top and bottom provide greater rigidity, leave clear unobstructed working areas. Battered Face Battered Face with Single Radius Battered Face with Double Radius All you need for 100 L.F. 10 pcs Back Forms 10 pcs Gutter Forms 10 pcs Curb Face Forms 20 pcs Top Spreaders 11 pcs Full Division Plates 50 pcs 3/4" x 24" Form Pins FLEXIBLE FORMS for RADIUS FORMING for step type curbs and gutters with a batter and radius The only system of radius forming that cuts forming and finishing costs 80% or more since it provides a flexible curb face form with a batter and a radius to conform to the exact profile of the straight curb and gutter just lap the flexible forms at the end of the straight forms and continue forming. This unique flexible curb face form consists of 1-foot segments that rotate on a center rivet with free floating rods at the top and bottom to reinforce the forms and to insure inward or outward curvatures of the exact profile required. 2 With the front and back flexible forms in place the division plates are installed, then the flexible curb face forms are slipped into the clips and locked to the division plates. End angles and lock clamps lock the sections together to maintain alignment at the form joints. We suggest one full division plate and 5 skeleton division plates for each 10-foot section of form to insure the most accurate forming. Rotating Clip Curb Face FLEXIBLE CURB FACE FORMS 10' long 4", 5", 6", 7", 8" high FLEXIBLE BACK AND FRONT FORMS 10' long 4" to 24" high Minimum radius 18" Hold Down Clip

70 Achieve stunning detail and flawless design with the complete line of Butterfield Color Decorative Concrete Products. At Butterfield Color we have developed Decorative Concrete Stamping, Coloring and Staining Systems to meet the demands of our customers. DECORATIVE CONCRETE PRODUCTS Engineered Concrete Performance PRODUCT PACKAGING COVERAGE QUICK REFERENCE GUIDE INTEGRAL COLOR Uni-Mix Integral Color (5 Sack) Dissolvable Bag 1 Bag Per Cubic Yard Uni-Mix Integral Color (6 Sack) Dissolvable Bag 1 Bag Per Cubic Yard Uni-Mix Liquid Integral Color 1, 2, 3.5 gal. Pails Varies by Weight Select Grade Integral Color Dissolvable Bag 1 Bag/2 cu. yd., 1 Bag/cu. yd., 2 Bag/cu. yd., 3 Bag/cu. yd. COLOR HARDENER Perma-Cast Shake-on Color Hardener 60 lb. Square Pail Dark Colors: SF, Light Colors: SF RELEASE AGENTS Perma-Cast Antiquing Release 30 lb. Pail 1,000-1,200 SF Perma-Cast Antiquing Release Mini Pack 1 lb. Pack SF Clear Liquid Release 5 gal. Pail 750 SF Select Grade Antiquing Release 30 lb. Pail SF STAIN Perma-Cast Sierra Stain 1 gal. Jug 300 SF (mixed w/1 gal. Potable Water) Renovatio Concrete Stain 32 oz. Kit 500 SF (3 Part Kit mixed w/128 oz. Potable Water) Renovatio Concrete Stain 16 oz. Kit 250 SF (3 Part Kit mixed w/64 oz. Potable Water) Renovatio Concrete Stain 4 oz. Kit 62 SF (3 Part Kit mixed w/16 oz. Potable Water) Elements Transparent Stain 32 oz. Unit SF (mixed w/96 oz. Potable Water) Elements Transparent Stain 4 oz. Unit SF (mixed w/12 oz. Potable Water) VERTICAL WALL MIX Cantera Vertical Wall Mix 35 lb. Bag Approx. 8 SF at 1" thickness OVERLAY MATERIALS T-1000 Stampable Overlay (Cement Gray) 55 lb. Bag 16 3/8" average depth T-1000 Stampable Overlay (Cement White) 55 lb. Bag 16 3/8" average depth T-1000 Fine: Sprayable Application (Cement Gray) 55 lb. Bag 48 1/8" average depth T-1000 Fine: Sprayable Application (Cement White) 55 lb. Bag 48 1/8" average depth T-1000 Fine: Repair Application (Cement Gray) 55 lb. Bag 96 1/16" average depth T-1000 Fine: Repair Application (Cement White) 55 lb. Bag 96 1/16" average depth T-1000 Color Pack (Available in Uni-Mix Colors) Bag 1 Bag Per 1 Bag of T-1000 T-1000 Primer 1 gal. Jug 400 SF (mixed with water) STENCILS Non-Adhesive Stencils 1,000 SF Roll (4' x 250') 900 SF after cutting Adhesive Stencils 500 SF Roll (3' x 167') 400 SF after cutting Non-Adhesive Mini Roll Stencils 100 SF Roll 90 SF after cutting Non-Adhesive Soldier Course Stencils 300' Roll 295 LF after cutting Adhesive Soldier Course Stencils 300' Roll 295 LF after cutting SURFACE RETARDERS SurfEtch Top Surface Retarder 1 gal., 5 gal SF/GAL, SF/GAL CURING & SEALING FINISHES Clear Guard Cure and Seal 1 gal., 5 gal., 55 gal. Curing: 200 SF/GAL Sealing: SF/GAL Clear Guard H2O Cure & Seal 1 gal., 5 gal. Curing: 200 SF/GAL Sealing: SF/GAL Clear Guard H2O Wet Look 1 gal., 5 gal. Sealing: SF/GAL Color Guard Solid Cure and Seal 1 gal., 5 gal. Curing: 200 SF/GAL Sealing: SF/GAL Color Guard Translucent Cure and Seal 1 gal., 5 gal. Curing: 200 SF/GAL Sealing: SF/GAL SharkGrip Non-Skid Additive 1 lb. 1 lb. Per 5 gal. of Clear Guard Flattening Paste 1 qt. 1 qt. Per 5 gal. of Clear Guard COUNTERTOP MIX Flat Out Countertop Mix 55 lb. Bag " Flat Out Polymer 5 gal. Pail Approx Quarts per 55 lb. Bag of Flat Out Countertop Mix All Coverage Rates my vary depending on jobsite conditions. for actual coverage rates jobsite mock-ups must be completed

71 DECORATIVE CONCRETE PRODUCTS Uni-Mix Integral Colorant Uni-Mix Integral Colorant is a premeasured admixture for integrally coloring ready mixed concrete during batching. Conforming to ASTM Standard C979 (Standard Specification for Pigments for Integrally Colored Concrete), it is a blend of non-fading, synthetic iron oxides and a water-reducer, which produce uniform, streak-free colors in concrete. The water-reducer in Uni-Mix Integral Colorant allows the color to quickly and evenly disperse without additional water, thereby maintaining the strength and freeze/thaw resistance of the cured concrete. This same component improves the finishing characteristics of the concrete, which contributes to color uniformity and surface durability. Superior quality control during manufacturing and packaging help to ensure your jobs will have uniform color from load-to-load. Uni-Mix Integral Colorant is suitable for all concrete flat work installations, interior floors and exterior hardscapes, as well as precast, tilt-up and cast-in-place applications. Uni-Mix Liquid Integral Colorant Uni-Mix Liquid is a precise blend of concentrated synthetic iron oxide pigments, dispersants, and stabilizing agents. By stocking only 4 or 5 base colors, a wide range of colors are possible with the press of a button. Benefits include offering color on demand while reducing inventory. With both batch plant and bucket dispensing systems available, a Butterfield Color Uni-Mix Liquid System easily allows and quickly provides standard and custom colors. Butterfield Color Uni-Mix Liquid dispensing systems are pre-programmed with Butterfield Color formulas, as well as those of other major color manufacturers. New color formulations are available on a continuing basis. Butterfield Color s Uni-Mix Liquid Color offers a premium quality product, backed by unmatched customer service. From the initial machine selection and start-up, to training and service, Butterfield Color is here to assist each step of the way. Perma-Cast Shake-on Color Hardener Perma-Cast Shake-on Color Hardener is a dry shake color hardener that is applied to the surface of freshly placed concrete. It is a cementitious-based coloring material that may be used to create abrasion resistant interior floors and freeze-thaw stable exterior hardscapes. The time-tested formulation of Perma-Cast Shake-on Color Hardener creates an extremely dense surface that is resistant to foot and vehicular traffic and extreme weather. It is available in a wide range of streak free, uniform colors ranging from subtle pastels to deep, rich hues. It is used to uniformly color gray concrete, or provide random accents of color on concrete integrally colored with Uni-Mix Integral Colorant or Uni-Mix Liquid. Perma-Cast Shake-on Color Hardener is a precise blend of cement, silica quartz aggregates, synthetic iron oxides and plasticizer. Perma- Cast Shake-on Color Hardener conforms to ASTM Standard C979 for color stability. Engineered Concrete Performance Clear Liquid Release Butterfield Color Clear Liquid Release is a bond breaker used with stamping mats, texturing skins or texture rollers prior to imprinting concrete or cementitious overlays. It prevents the stamping or texturing tool from sticking to the surface, enhances the transfer of the detailed pattern and texture and prolongs the surface life of the stamping mat or texturing tool. Use on integrally colored or uncolored concrete, shake-on color hardeners and stampable cementitious overlays. It is suitable for outdoor and indoor use. Clear Liquid Release is particularly useful with overlays since it will not contaminate the existing concrete substrate as readily as powdered releases. It evaporates quickly and requires little to no clean up prior to applying solvent based curing and sealing compounds such as Clear Guard Cure and Seal, or prior to chemical staining with Perma-Cast Sierra Stain. VOC content is less than 450 g/l (3.75 lb./gallon). Perma-Cast Antiquing Release Butterfield Color Perma-Cast Antiquing Release is a pigmented powder bond breaker used with stamping mats, texturing skins and texture rollers. It also provides accent colors that compliment or contrast with the underlying concrete surface. Additionally, it enhances the transfer of the detailed pattern and texture, and prolongs the surface life of the stamping mat or texturing tool. It is compatible with Uni-Mix Integrally colored concrete, Perma-Cast Shake-on color hardened concrete and T1000 Stampable cementitious overlays. Perma-Cast Antiquing Release is a finely ground, streak free powder that is a blend of UV-resistant pigments and water repelling additives. It is broadcast over the concrete surface prior to placing the stamping or texturing tools. As the imprinting tool is pressed into the plastic concrete surface, a portion of the Perma-Cast Antiquing Release is embedded into the textured surface of the concrete. Perma-Cast Sierra Stain Perma-Cast Sierra Stain is a penetrating, reactive stain that chemically combines with cured concrete to produce permanent, variegated coloring effects. Perma-Cast Sierra Stain is suitable for exterior hardscapes, artificial rock formations, interior floors, walls, statuary and counter tops. Expect wide color variations, mottling and unevenness of the color. Each application of Perma-Cast Sierra Stain produces unique results. Apply to clean, sound concrete or cementitious overlays. Different stain colors may be used in combination for more coloration affects. In addition, many faux finishing techniques used with paints, can be utilized with chemical stains. Introduce saw cuts to create patterns and graphics in the substrate before staining. For truly unique and creative concrete installations, use of Perma-Cast Sierra Stain can be combined with other Butterfield Color products

72 T1000 Fine Overlay T1000 Fine Overlay is a polymer modified cementitious topping formulated for resurfacing structurally sound, nonmoving concrete floors, walls and exterior hardscapes. The cured product creates an abrasion resistant surface suitable for pedestrian and automobile traffic. It is an ideal system for restoring worn or color blemished concrete, or correcting construction errors. T1000 Fine Overlay is a precise blend of graded sand, cement and polymer, which allow for thin applications. It can be smooth troweled, broom finished or applied using a splatter brush or hopper gun for a knock down finish with Butterfield Color Stencils. Application thickness ranges from 1/16 inch (1.5mm) to a maximum of 3/16 inch (4.5mm). T1000 Fine Overlay is pre-packaged in medium gray or white. T1000 Stampable Overlay T1000 Stampable Overlay is a polymer modified cementitious topping formulated for resurfacing structurally sound, non-moving concrete floors and exterior hardscapes. The overlay provides a durable surface suitable for stamping with Butterfield Color Stamping Tools or textured with Butterfield Color Texture Rollers. The cured product creates an abrasion resistant surface suitable for pedestrian and automobile traffic. It is an ideal system for restoring worn or color-blemished concrete, out of level surfaces or correcting construction errors. Stamping Tools Butterfield Color has built its reputation on quality and reliability. All of our stamping and texturing tools have been designed and precision manufactured to perform to the expectations that our 40 years of field experience provides. Each stamping tool is molded using the actual stone, brick or wood that it recreates. With over 50 stamp patterns available, our tools are designed to minimize repetition, surface cracking and blowouts along grout lines, thus producing realistic and natural appearing installations, reducing the touch-up time, and increasing production capabilities. The tools can be used on fresh concrete or cementitious overlays. Form & Step Liners Form and Step Liners by Butterfield Color have been designed for efficiency and aesthetic appeal. The polyurethane form liners can be easily attached and are compatible with standard 1-1/2 inch dimensional foam or form lumber. The Cut Stone Form Liner series of tools allows for the transfer of a rough cut stone texture to tread edges, corners and risers of cast in place steps. They can also be effectively used for countertops, pool coping and wall caps. 50 DECORATIVE CONCRETE PRODUCTS Engineered Concrete Performance Renovatio Concrete Stain Renovatio Concrete Stain is a high performance, polymerized coloring stain. It is a concentrated, three-component system that penetrates and bonds within the porous concrete substrate. It provides a uniformly colored, no gloss, abrasion resistant surface, suitable for coloring existing interior concrete floors and exterior concrete hardscapes. It can be used to recolor unsealed decorative concrete or to renovate weathered or discolored concrete surfaces. A companion product, Renovatio Translucent Accent Stain, creates translucent variegated color or antiquing effects on stamped or textured surfaces. Renovatio Clear Seal can be applied for additional protection or a gloss finish over Renovatio Concrete Stain and Renovatio Translucent Accent Stain. Renovatio products are breathable and freeze/thaw resistant. They are low odor, water-based, environmentally and user-friendly concrete staining systems. Elements Transparent Concrete Stain Elements Transparent Concrete Stain represents the latest in nanopigment technology. It is formulated to readily permeate the concrete surface and create translucent color variations similar to reactive acid stain. It is a penetrating, non-film forming stain for existing concrete surfaces. It is resistant to fading from sunlight. It can be used on interior concrete floors and exterior concrete hardscapes. It may also be applied to concrete blocks, pavers and cementitious overlays. Clear Guard Cure & Seal Clear Guard Cure & Seal is a solvent-based, VOC compliant, non-yellowing, curing and sealing compound for newly poured and existing concrete surfaces. The product is formulated for curing and sealing uncolored concrete, integrally colored concrete and color hardened concrete, stamped or stenciled concrete and cementitious overlays. Clear Guard Cure & Seal visually enhances the concrete color, protects the surface from dirt and staining and minimizes the affects of deicing salts and exposure to gas or oil. Cantera Vertical Wall Mix Cantera Vertical Wall Mix is a pre-packaged lightweight overlay system for vertical surfaces. It can be trowel applied and then stamped, textured or sculpted by hand to mimic natural stone construction. Application thickness ranges from 1/4 inch to a maximum of 1 inch in a single application

73 CHEMICALS Form Release Agents and Treatments A light, clean, odorless, chemically-reactive architectural form release agent. VOC Maximum Plus compliant and formulated for use with a wide variety of forming materials. Coverage: 1200 to 2500 sq. ft. per gallon. Unikote Form Release Unikote Form Oil Curing Compounds and Liquid Hardeners UniWhite Cure Wax F UniWhite Cure Wax DOT F UniClear Cure Wax F Curing and Sealing Compounds A general purpose, neutral barrier form release agent. VOC compliant and formulated to be non-staining. Safe to use with secondary toppings or coatings, caulks and sealants. Coverage: 750 to 1750 sq. ft. per gallon. An economical, general use form oil. Economical cost basis and VOC compliant. Coverage: 1000 to 2000 sq. ft. per gallon. High performance, water-based, white pigmented wax curing compound. VOC compliant. ASTM C309, Type II, Class A, AASHTO M148. Coverage: 200 sq. ft. per gallon. High solids, white pigmented, wax-based curing compound. VOC compliant. DOT specification for approved states. CRDC-300, ASTM C309, Type II, Class A, AASHTO M148. DOT specifications for approved states available. Coverage: 200 sq. ft. per gallon. High performance, clear, water-based wax curing compound. VOC compliant. ASTM C309, Type I, Class A, AASHTO M148. DOT specification for approved states. Coverage: 200 sq. ft. per gallon. UniWhite Water emulsified, white pigmented, resin curing compound. VOC compliant. ASTM C309, Cure Resin F Type II, Class A & B, AASHTO M148. Coverage: 200 sq. ft. per gallon. UniResin Cure WB F Cure Hard F UniCure & Seal WB F UniCure & Seal 25 UniCure & Seal 30 UniCure & Seal 1315 UniSeal UniSeal Tuf A clear resin based membrane forming dissipating curing compound. ASTM C309 Type I (Type I-D available) Class A & B. Waterbased. DOT formula available. Coverage: 200 sq. ft. per gallon. An economical, silicate-based, ready-to-use, curing, hardening and dust proofing compound. VOC compliant. Ideal for preparing floors and / or base slabs to receive a secondary topping, coating or finish. Coverage: sq. ft. per gallon. A water-based clear acrylic curing and sealing compound. Cures, seals, hardens and dust-proofs freshly placed or aged concrete. VOC compliant. ASTM C309, Type 1, 1-D, Class A & B. Coverage: sq. ft. per gallon. 25% high solids, solvent-based clear acrylic curing and sealing compound. Cures, seals, dustproofs freshly placed concrete. VOC compliant. ASTM C309, Type 1, 1-D, Class A & B. ASTM C1315, Class A. Coverage: sq. ft. per gallon. 30% high solids, solvent-based clear acrylic curing and sealing compound. Cures, seals, dustproofs freshly placed concrete. VOC compliant. ASTM C309, Type 1, 1-D, Class A & B. ASTM C1315, Class A. Coverage: sq. ft. per gallon. High solids, solvent-based clear acrylic curing and sealing compound. Cures, seals, dustproofs freshly placed concrete. VOC compliant. ASTM C309, Type 1, 1-D, Class A & B. ASTM C1315, Class A. Coverage: sq. ft. per gallon. A 25% solids, transparent, high gloss sealer and curing compound. 100% acrylic-based, heavy-duty, non-yellowing solvent-based sealer. ASTM C1315, Class A. Interior and exterior applications. Coverage: sq. ft. per gallon. A premium, transparent, high gloss sealer and curing compound. 100% acrylic-based, heavy-duty, non-yellowing solvent-based sealer. ASTM C1315, Class A. Interior and exterior applications. Ultra tough film. Coverage: sq. ft. per gallon. Concrete and Masonry Sealer A premium, water-based blend of silane and siloxane based waterproofing components. Silane Sealer WB F Prevents moisture and salt attack to concrete, masonry, blocks and bricks. VOC compliant. Coverage: sq. ft. per gallon depending on application

74 CHEMICALS Floor Hardeners / Toppings and Levelers UniShake Quartz Natural Kreatseal F Uniflow Microment FF A natural quartz-silica mixture of finely graded aggregates, plasticizers and Portland cement. Natural concrete gray color. Interior and exterior applications. Increases surface abrasion resistance two times over normal concrete mix designs. Coverage: lb. per sq. ft. A colorless, odorless, premium water-based reactive siliconate concrete sealer. VOC compliant. 10 and 20 year warranty. Coverage: sq. ft. per gallon. Self-leveling, free flowing, cementitious, non-structural floor underlayment. All substrates must be primed with Universal s Uniprimer. Coverage: 24.4 sq. ft./bag at 1/4". Single-component, cement-based, multipurpose, trowel-grade dressing, patch, underlayment and embossing agent. Micro-thin, skim coating repair product. Interior use. Coverage: for repairs: 3-5 sq. ft. per 1 lb. over 1/16", for surface skimming: sq. ft. per 1 lb. depending on surface applied. Cement Repair Mortars UniPatch 5 Fast-setting, single-component, polymer modified, cement-based, trowel grade repair mortar. Vertical and horizontal applications. UniPatch 20 Single-component, polymer modified, cement-based, trowel grade repair mortar. Vertical and horizontal applications. UniRoad Repair DOT UniPatch VO UniPlug UniPlug Fast Single-component, very rapid setting, chemical action, concrete repair mortar for highway and heavy industrial repair jobs. Fast track and deep repairs. ASTM C928. Single-component, Portland cement-based, polymer modified, non-sag repair mortar for vertical and overhead applications. Quick setting, high early strength generating, hydraulic cement for patching and repairing active water leaks. Super fast-setting formula, UniPlug Fast available upon request. Latex Bonding Agents Water-based, bonding agent and admixture for cement mortars and cement-based repair UniBond F mortars. Acrylic emulsion chemistry. Non-emulsifiable. VOC compliant. Coverage: sq. ft. per gallon depending on application. Water-based, bonding agent and admixture for cement mortars and cement-based repair Proweld F mortars. PVA emulsion chemistry. Reemulsifiable. VOC compliant. Coverage: sq. ft. per gallon depending on application. Epoxy Construction Adhesives 100% solids, hi-mod, low viscosity, moisture insensitive, structural epoxy adhesive. UniBond LV FH Bonding, grouting and anchoring. ASTM C881-91, Type I, II, IV, V, Grade 1, Class C. VOC compliant. 100% solids, hi-mod, medium viscosity, moisture insensitive, structural epoxy adhesive. UniBond MV FH Bonding, grouting and anchoring. Mix with sand to produce mortar. ASTM C881-91, Type I, II, IV, V, Grade 2, Class C. VOC compliant. UniBond Rapid Gel Paste FH UniBinder FH Non-Shrink Grouts UniGrout UniGrout Super 100% solids, hi-mod, gel-paste viscosity, moisture insensitive, structural epoxy adhesive. Rapid setting, horizontal anchoring of dowel bars. Bonding, grouting and anchoring. ASTM C881-91, Type I, II, IV, V, Grade 3, Class C. VOC compliant. 100% solids, lo-mod, low viscosity, moisture insensitive, structural epoxy adhesive. Bonding, grouting and anchoring. ASTM C881-91, Type I, II, IV, Grade 1, Class C. VOC compliant. Non-shrink, natural-aggregate, construction-grade grout. CRD C621 and ASTM C1107. Approximate Yield:.43 cu. ft. per 50 lb. bag. Non-shrink, natural-aggregate, high performance, high precision grout. CRD C621 and ASTM C1107. High flow and extended work time. Approximate Yield:.43 cu. ft. per 50 lb. bag

75 BAR SUPPORTS TYPICAL WIRE SIZE & GEOMETRY SYMBOL BAR SUPPORT ILLUSTRATION MINIMUM WIRE SIZE TOP LEGS RUNNER USUAL GEOMETRY (VARIATIONS OF PLUS OR MINUS 1/8") SB SLAB BOLSTER NO. 4 NO. 6-3/4" TO 3" HEIGHTS IN 5-FOOT AND 10-FOOT LENGTHS. LEGS SPACED 5" ON CENTER, VERTICAL SBU NO. 4 NO. 6 NO. 7 SAME AS SB SLAB BOLSTER UPPER BB BBU BEAM BOLSTER BEAM BOLSTER UPPER UP TO & INCLUDING 2" NO. 7 NO. 7 - OVER 2" TO 5" NO. 4 NO. 4 - UP TO & INCLUDING 2" NO. 7 NO. 7 NO. 7 OVER 2" TO 5" NO. 4 NO. 4 NO. 4 3/4" TO 5" HEIGHTS IN INCREMENTS OF 1/4" AND LENGTHS OF 5 FEET. LEGS SPACED 2-1/2" ON CENTER. SAME AS BB BC NO. 7 NO. 7-3/4", 1", 1-1/4", 1-1/2" AND 1-3/4" HEIGHTS. JC HC BAR CHAIR JOIST CHAIR HIGH CHAIR NO. 6 NO. 6 - OVER 2" TO 5" NO. 4 NO. 4 - OVER 5" TO 9" NO. 2 NO. 2 - OVER 9" NO. 0 NO. 0-3/4", 1" AND 1-1/2" HEIGHTS. 4", 5" AND 6" WIDTHS. LEGS AT 20 DEGREES OR LESS WITH VERTICAL. WHEN HEIGHT EXCEEDS 12", LEGS ARE REINFORCED WITH WELDED WIRES OR ENCIRCLING WIRES. HEIGHTS IN 1/4" INCREMENTS. 2 HCM CHC HIGH CHAIR FOR METAL DECK CONTINUOUS HIGH CHAIR SAME AS HC - NO. 2 SAME AS HC - SAME AS HC. THE LONGEST LEG WILL GOVERN THE SIZE OF WIRE TO BE USED. HEIGHTS IN INCREMENTS OF 1/4". SAME AS HC IN 5-FOOT AND 10-FOOT LENGTHS. ALL LEGS ARE 8-1/4" ON CENTER MAXIMUM, WITH LEG WITHIN 4" OF END OF CHAIR. CHCU SAME AS CHC NO. 4 SAME AS CHC CHCM CONTINUOUS HIGH CHAIR UPPER CONTINUOUS HIGH CHAIR FOR METAL DECK UP TO & INCLUDING 2" NO. 4 NO. 4 - NO. 2 NO. 2 - OVER 2" TO 5" NO. 2 NO. 4 - UP TO 5" HEIGHTS IN INCREMENTS OF 1/4". WITH NO. 4 TOP WIRE, MAXIMUM LEG SPACING IS 5" ON CENTER. WITH NO. 2 TOP WIRE, MAXIMUM LEG SPACING IS 10" ON CENTER. ASK ABOUT OUR FULL LINE OF PLASTIC BAR SUPPORTS AND ACCESSORIES

76 BRIDGE HANGERS BRIDGE DECK HANGERS Type Part # Style SWL (lbs.) 1 T1H 90 & 90 deg. 3,500 1-A T1AH 90 & 45 deg. 3,500 2 T2H 90 & 90 deg. 2,375 1" haunch 2-A T2AH 90 & 45 deg. 2,500 3 T3H 90 & 90 deg. 2, /2" haunch 4 T4H 90 & 90 deg. 6,000 4-A T4AH 90 & 45 deg. 6, A CHT11A Comb. hangers 3, A CHT14A Comb. hangers 6,000 7 T7H 90 & 90 deg. 2, /2" haunch 7-A T7AH 90 & 45 deg. 2, /2" haunch 8 T8H 15 & 15 deg. 3,000 8-A T8AH 15 & 45 deg. 3,000 Flange Width (in.): 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21 & 22. (Add width to Part #) 1/2" hex coil nuts provided with each hanger. Designed for use with 1/2" diameter bolts only. BROACHED DECK HANGERS Type Part # SWL (lbs.) BDH-1 TBDH1 4,500 BDH-2 TBDH2 4,500 BDH-3 TBDH3 4,500 Size (in.): 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53 and 54. (Add size to Part #) FILLET HANGER Length: 22" Part #FH FILLET CLIP Size: 3/4" thru 4" Part #FC Coil nut and bolt not included. HOOK HANGERS Type Part # Style SWL (lbs.) 1-B T1BH 90 deg. 3,500 1-AB T1AB 45 deg. 3,500 2-B T2B 90 deg. 2,375 4-AB T4AB 45 deg. 5,000 Flange Width (in.): 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21 & 22. (Add width to Part #) 1/2" hex coil nuts provided with each hanger. HOOK DETAIL BRIDGE DECK HALF HANGERS Type Style Part Strut Tail SWL # Dia. Length (lbs.) 1-C 90 deg. BDHH1C " 3,000 1-S 90 deg. BDHH1S " 3,000 1-AC 45 deg. BDHH1AC " 3,000 1-AS 45 deg. BDHH1AS " 3,000 4-AC 45 deg. BDHH4AC " 6,000 4-AS 45 deg. BDHH4AS " 6,000 4-C 90 deg. BDH4C " 6,000 4-S 90 deg. BDH4S " 6,000 2-C 1" haun. BDH2C " 2,375 2-S 1" haun. BDH2S " 2,375 7-S 2½" haun. BDH7S " 2,375 8-C 15 deg. BDH8C " 2,375 8-S 15 deg. BDH8S " 2,375 4-AP 45 deg. PSHH4APR "x4"x2" 3,300 4-AP-P 45 deg. PSHH4APRP "x4"x2" 3,300 with plate One 1/2" coil nut included with each hanger. ADJUSTABLE HALF HANGER 1 90 deg. Part #T1AHH 1-A 45 deg. Part #T1AHH 2 90 deg./1" haun. Part #T2AHH 8 15 deg. Part #T2AHH One clip and three nuts included. OVERHANG BRACKETS STANDARD OVERHANG BRACKET PART #SOHB Overhang Bracket Conversion Kit converts standard overhang bracket to adjustable overhang bracket using contractor owned horizontal member. Standard Kit Part #SOBS Heavy Duty Kit Part #SOBHD ADJUSTABLE OVERHANG BRACKET Part #BOB Part #BOBD HEAVY-DUTY ADJUSTABLE OVERHANG BRACKET Part #BOBHD GUARD RAIL RECEPTACLE Size: 2 x 4 Part #BOBGRR24 Size: 2 x 6 Part #BOBGRR26 Includes 2 ea. 1/2" N.C. bolts with nuts. BRIDGE OVERHANG BRACKET EXTENDER Part #BOBEXT Includes 2 ea. 1/2 N.C. bolts with nuts. WALL PLATE ASSEMBLY Assembly Part #WPABOB Adjustment Plate Part #AP Wall Bracket Part #WPAWB For adjustment bridge overhang bracket. For use with 3/4" diameter bolt. WIRE BEAM SADDLE HANGERS Light forming up to 7½" slab thickness (1½:1) safety factor. Heavy forming over 7½ slab thickness (2:1) safety factor. Safe working loads (SWL) are for complete hanger Type 1 and 2 may be obtained with safe working loads of 2,500 lbs. (#8 Wire), 4,000 lbs. (#6 Wire) and 6,000 lbs. (#4 Wire). Wire Part # Part # Part # Part # #8 WBST18 WBST28 #6 WBST16 WBST26 #4 WBST14 WBST24 WBST34 WBST454 All (2:1) light forming and (2:1) heavy forming: 1,875 lbs. (#8 Wire), 3,000 lbs. (#6 Wire) and 4,500 lbs. (#4 Wire). Type 3 SWL (2:1) light forming = 3,000 lbs. SWL (2:1) heavy forming = 2,250 lbs. Type 4 and 5 SWL (2:1) light forming = 1,000 lbs. SWL (2:1) heavy forming = 750 lbs. PLATE SADDLE HANGER 7-Ga. Wire (1000#) and 4 Ga. Wire (1500#) Size: Overall length to 18" (with 1¾" plate) Longer sizes available 3¾" plate available Plates can be different sizes Plates can be set-back SNAP TIE HANGERS Type I SWL (2:1) = 1,500 lbs. Type II SWL (2:1) = 2,000 lbs. Overall dimensions measured from inside to inside of heads. Type Description Part# I Standard STHT1 II Heavy Duty STHT2 Overall dimensions (in.): Up to 30, 33, 36, 39, 42, 45, 48, 51, 54, 57 and 60. Available with 1" large plastic cones or washers. COIL HANGERS COIL HANGER SADDLE TYPE Diameter SWL (lbs.) 1/2" 2,250 3/4" 5,625 1" 7,500 Overall Length Part # To 24" CH24 To 30" CH30 To 36" CH36 To 42" CH42 To 48 CH48 Overall length is total length of hanger from bottom of coil to bottom of coil

77 innovating concrete construction SNAPTIES Meadow Burke can provide a full range of sizes and types of integral head snapties to suit your specific job needs. Available in both plastic cone and metal washer designs, these ties can be provided from stock for common end and wall dimensions, or can be produced quickly for your special wall forming dimensions. Over the years, the plastic cone design has proven to be the preferred spreader device over the metal washer design. Fabricated from high impact polystyrene material, the plastic cone provides positive spreader action, while at the same time covering the breakback portion of the wire tie to insure that it will not adhere to the concrete, and will break back and remove from the concrete easily. Plastic cones also provide a more desirable cone shaped cavity in the wall, which is better suited to patching or grouting. End Breakback Wall Thickness RCH End End Breakback Wall Thickness RHW End 1" x 1" Plastic Cone SNAPTIE - STANDARD 2,250 LBS. SWL Metal Washer STANDARD BREAKBACK IS 1". 1/2" AVAILABLE ON SPECIAL ORDER (RHW orders only). Stock ties sold in boxes of 100 only. RHW - round head with washer spreader. RHC - round head with cone spreader. For improved performance and guaranteed breakback results, specify plastic cones when ordering any snapties. Meadow Burke Products cannot guarantee breakback results when metal washers and wax coatings are specified. 4-3/4" END (Lumber and Wedge) 8-1/4" END (Lumber and Wedge) 2 Product Product Weight Wall Size Code Code Per 100 RHW RHC (LBS) 6" " /8" " " " /8" " " " " " " " " " Product Product Weight Wall Size Code Code Per 100 RHW RHC (LBS) 6" " /8" " " " /8" " " " " " " " " " STEEL WEDGE MB Item Number Weight per lbs. Safe working load 3,250 lbs. For standard or heavy snapties

78 innovating concrete construction LIGHT FORMING PANEL TIE - STANDARD PANEL TIE - HEAVY STANDARD Safe Working Load = 2,250 lbs. Approximate Safety Factor = 2:1 HEAVY Safe Working Load = 3,000 lbs. Approximate Safety Factor = 2:1 Panel Ties Wall Size Standard Heavy MB Item Weight MB Item Wt./100 Number (lbs.) Number (lbs.) 6" " " " " " " " " " " " STRONGBACK TIE MB Weight Size Item Per 100 Number (lbs.) 4" x 4" " x 6" " x 6" WALER TIE BASE TIE 1-5/32" Wall Thickness 1-5/32" MB Weight Size Item Per 100 Number (lbs.) 2 x x MB Weight Size Item Per 100 Number (lbs.) FLAT TIE - STANDARD (Symons - Mod-U-Form) Standard breakback is 1/4". 2,250 lbs. safe working load, approx. 2:1 safety factor. For other wall sizes - P.O.A. 56 MB Weight Size Item Per 100 Number (lbs.)

79 innovating concrete construction LIGHT FORMING FLAT WASHER For use with coil bolts and coil rod/nut(s). Washer sizes are designed to provide adequate bearing against wood form members. MB Item Description Type Weight Number Bolt Dia. Size Per /2" 3" x 4" x 1/4" Standard /2" 4" x 5" x 1/4" Heavy /4" 3" x 4" x 1/4" Heavy /4" 4" x 6" x 1/4" Standard /4" 5" x 5" x 1/2" Heavy " 5" x 5" x 1/2" Standard " 7" x 7" x 3/4" Heavy 1, /4" 6" x 6" x 1/2" Standard /4" 7" x 7" x 3/4" Heavy 1, /2" 5" x 5" x 3/4" Standard /2" 7" x 7" x 3/4" Heavy 1,140 FORM BRACE ALIGNER MB Weight Item Per 100 Number (lbs.) WEDGE BOLT Packaging MB Weight Units/ Item Per 100 Bucket Number (lbs.) PENCIL ROD (1/4") COILS OR STRAIGHT MB Item Number Packaging (LF/lbs.) LF / 100 Straightening and cutting available per 100 lbs. Available in 20' lengths. PENCIL ROD TIGHTENER MB Weight Size Item Each Number (lbs.) #1-1/4" Rod #2-3/8" Rod #3-1/2" Rod FORM CLAMP MB Weight Size Item Per 100 Package Number (lbs.) Quantity #1-1/4" Rod #2-3/8" Rod #3-1/2" Rod

80 innovating concrete construction MEDIUM/HEAVY FORMING COIL NUT - STANDARD COIL TIE - TWO STRUT MB Weight Item Description Safe Work Per 100 Number Bolt Dia. Packaging Loads (lbs.) (lbs.) /2" 1,000 4, /4" 500 9, " , /4" 70 27, /2" 50 40, Safety factors are 2:1. NOTE: Epoxy coating of coil ties may reduce inside thread diameter. 1/2" 4.5M 1/2" 6.75M 3/4" 6.75M 3/4" 9M 1" 13.5M Length Weight Weight Weight Weight Weight (lbs.) (lbs.) (lbs.) (lbs.) (lbs.) to 8" over 8" to 9" over 9" to 10" over 10" to 11" over 11" to 12" over 12" to 13" over 13" to 14" over 14" to 15" over 15" to 16" over 16" to 17" over 17" to 18" over 18" to 19" over 19" to 20" over 20" to 21" over 21" to 22" over 22" to 23" over 23" to 24" Each 1" over 24 add Add for Cone-Fast Add for Water Seal *2001 Welding Coil Tie Deduct Weights per 100 pieces. CONE FAST CONES MB Weight Item Description Per 100 Number Bolt Dia. Setback (lbs.) /2" 1" /2" 1-1/2" /2" 2" /4" 1" /4" 2" " 2" /4" 2" 18.5 Screw-on plastic cone

81 innovating concrete construction FORMING AND BRIDGE DECK HANGERS CONTINUOUS COIL ROD LOW-STRENGTH HI-STRENGTH Low-Strength - 10 Ft. Hi-Strength - 12 Ft. Weight Nominal MB Item Safe Work MB Item Safe Work Per Diameter Number Load (lbs.) Number Load (lbs.) 100 LF 1/2" , , /8" , /4" , , " , , /4" , , /2" , , Minimum coil penetration same as shown for coil bolts. Two (2) standard coil nuts or one (1) heavy coil nut must be used to develop the safe working load. Meadow Burke Products will not guarantee the safe working load of any high strength coil rod which has been field welded or bent. 1/2" coil rod available only in high tensile material in either 10-foot or 12-foot lengths. 1-1/4" not available in 10-foot lengths. HANGER FRAME - STANDARD SWL - 3,000 lbs. HANGER FRAME - HEAVY SWL - 5,000 lbs. 15º 15º 15º 15º SWL - 3,000 lbs. SWL - 5,000 lbs. Flange Width Wt. (lbs.) Up to 10" 113 Over 10" to 12" 119 Over 12" to 14" 125 Over 14" to 16" 131 Over 16" to 18" 138 Over 18" to 20" 144 Over 20" to 22" 150 Over 22" to 24" 158 Each 1" Over 24" Add 3.1 All above include two (2) 1/2" coil nuts per hanger. Flange Width All above include two (2) 1/2" coil nuts per hanger. Wt. (lbs.) Up to 10" 113 Over 10" to 12" 119 Over 12" to 14" 125 Over 14" to 16" 131 Over 16" to 18" 138 Over 18" to 20" 144 Over 20" to 22" 150 Over 22" to 24" 158 Each 1" Over 24" Add SCREED HOLDER - HEAVY-DUTY MB Weight Item Type Length Per 100 Number (lbs.) No /2" No /4" No /4" Extra Coil Nuts 1" Dia. 41 Coil Nut Included. Specify type and O.D. of pipe

82 innovating concrete construction BRIDGE DECK HANGERS HALF HANGER - STRAIGHT TAIL (C) MB Weight Item Angle Safe Work Wire (C) Per 100 Number Load (lbs.) Diameter Dimension (lbs.) º 3, " º 4, " º 4, " 58 One 1/2" hex coil nut included with each hanger. HALF HANGER - C FOR CONCRETE BEAM (C) (C) MB Weight Item Angle Safe Work Wire (C) Per 100 Number Load (lbs.) Diameter Dimension (lbs.) º 3, " º 3, " º 5, " º 3, " º " " HH-90º 2, " /2" HH-90º 2, " 60 One 1/2" hex coil nut included with each hanger. HALF HANGER - S FOR STEEL BEAM (C) (C) MB Weight Item Angle Safe Work Wire (C) Per 100 Number Load (lbs.) Diameter Dimension (lbs.) º 3, " º 4, " º 6, " º 3, " º " " HH-90º 2, " /2" HH-90º 2, " 51 One 1/2" hex coil nut included with each hanger

83 innovating concrete construction MEDIUM/HEAVY FORMING COIL BOLT Bolts may be furnished with standard formed head or made with continuous coil rod and hex nut welded on. Min. Coil Penetration (see chart below) 1/2" Diameter 3/4" Diameter 1" Diameter 1-1/4" Diameter 1-1/2" Diameter Safe Work Load Safe Work Load Safe Work Load Safe Work Load Safe Work Load 4,500 / 6,750 lbs. 9,000 lbs. 18,000 lbs. 27,000 lbs. 40,000 lbs. Min. Coil Penetration Min.Coil Penetration Min.Coil Penetration Min.Coil Penetration Min.Coil Penetration Bolt MB Item MB Item MB Item MB Item MB Item Length Number Number Number Number Number 1-1/2" " /2" " /2" " " " " " " " " " ADJUSTABLE COIL BOLT Length OVERHANG BRACKET - SUPER 96 MB Description Weight Item Per 100 Number Diameter Length (lbs.) /2" 12" /2" 18" /2" 24" /4" 12" /4" 18" /4" 24" 290 Lightweight: Easier handling, less labor, reduced equipment demand. High Strength: Design handles up to 10 kip in best condition. Gang Ability: Gangs up to 24' - 0". Full Engineering Services: Layout services with load and spacing design. Quick, Easy Adjustment: Fully adjustable from the bridge deck. Adjustable Handrail: Accommodates sloping or super-elevated overhangs. Length: 96 inches

84 innovating concrete construction BRIDGE DECK OVERHANG PRODUCTS OVERHANG BRACKET OVERHANG BRACKET - LONG Upper Vertical Leg Lower Vertical Leg Bolt Holder Assy. 54" Slide Assembly Upper Diagonal Leg MB Weight Item Type each Number (lbs.) Lower Diagonal Leg 4250 configuration accommodates vertical height adjustment of 30º to 50º configuration accommodates vertical height adjustment of 50º to 70º. Meadow Burke Products bridge overhang bracket safe work load depends on loading, spacing and the bridge overhang bracket geometry. Consult with Meadow Burke engineers for specific design conditions and working loads along with the information published in the bridge deck forming handbook. LONG CONVERSION KIT One long diagonal and vertical leg. MB Weight Item each Number (lbs.) OVERHANG WALL PLATE ASSEMBLY Adjustment Plate OVERHANG GUARD RAIL ADAPTER BOLT ON / SLIP ON 4275 Bolt on Receptacle Accepts 2 x Slip on Receptacle Accepts 2 x 6 Wall Bracket MB Weight Item Type each Number (lbs.) Adjustment Plate Wall Bracket 1.34 For use with 3/4" diameter bolt. MB Weight Item Type each Number (lbs.) (2 x 4) (2 x 6) includes two 1/2" x 1" bolt with nuts (UNC) for attachment to bracket or extender. OVERHANG EXTENDER MB Weight Item Type each Number (lbs.) Includes two 1/2" x 1" bolts with nuts (UNC) for bolting to 4250 bridge overhang bracket

85 David White Skid Loaders Track Loaders Telescopic Handlers Excavators Chippers & Stump Grinders Paving Equipment Augers Buckets Grapples Backhoes & Trenchers Landclearing Attachments Hydraulic Compactors Compaction Equipment Asphalt & Trench Rollers Tampers Mulchers Excavating & Landscaping 4 Straw Blowers Hydroseeders Construction Lasers Level-Transits Skid Steer & Forklift Attachments 91

86 SKID LOADERS SERIES SKID LOADERS Models 4640E / 5240E / 5640E / 6640E / 7810E Narrow Widths Model 4640E has a width of only 59.7" with optional wheel package to easily fit on sidewalks. Joystick Control option Now an available option on models 4640E Turbo, 5240E, 5640E Turbo and 6640E Innovative acoustical materials Newly-designed engine-related components to reduce sound levels, inside and out New higher operating load capacities up to 2900 lbs. with optional counterweights Advanced high horsepower engines with in-cylinder glow plugs to improve cold weather starting, and an auto-shutdown system Exceptional hydraulic power for high breakout forces and outstanding attachment performance Models 3640E / 4240E Compact, low-profile design for maneuverability in narrow, low-clearance areas Powerful Yanmar diesel engines for power and performance where it counts All-Tach attachment mounting system compatible with most attachments

87 SKID LOADERS E-SERIES SKID LOADERS All dimensions are in inches (millimeters) unless otherwise noted. SPECIFICATIONS 3640E 4240E 4640E 5240E 5640E 6640E 7810E Overall Operating Height (fully raised) A (3546) (3584) 149 (3785) (3917) 162 (4115) (4113) 187.8" (4770) Height to Hinge Pin (fully raised) B (2746) 110 (2794) (2934) (3066) 123 (3124) (3157) 142" (3607) Overall Height w/ ROPS/FOPS Cab C 70.3 (1786) 71.9 (1826) 78.0 (1981) 78.0 (1981) 81.0 (2057) 82.0 (2082) 81.0" (2057) Ground Clearance D 6 (152) 8.3 (211) 7.5 (191) 7.5 (191) 8.0 (203) 9.1 (231) 9.1 (231) Overall Length E 114 (2896) (2952) (3119) (3208) (3327) (3594) 161.0" (4089) (w/55" bucket) (w/61" bucket) (w/66" bucket) (w/66" bucket) (w/70" bucket) (w/74" bucket) (w/84" bucket) Overall Length (less bucket) F 88.9 (2258) 91.1 (2314) 89.8 (2281) 94.2 (2393) 99.5 (2527) (2687) 122.0" (3099) Wheelbase G 34.5 (876) 36.7 (932) 37.5 (953) 42 (1067) 42.5 (1080) 48.4 (1219) 55.0" (1397) Dump Reach (at full height) H 22.8 (579) 22.6 (574) 27.6 (701) 27.6 (701) 32.8 (833) 35.2 (894) 38.2" (970) Rollback at Ground I º 27º 28º 28º 28.5º Dump Angle J º 40º 37º 37º 38º Overall Width K 48.4 (1229) 53/59 (1334/1483) 59.7*/62 (1516*/1575) 62/59.7 (1575/1516) 69 (1753) 72.5 (1841) 81.0" (2057) Bucket Width L 55.3 (1404) 60.6 (1539) ( ) ( ) ( ) ( ) 84" (2134) Clearance Circle (Rear) M 54.1 (1374) 58.4 (1484) 59.5 (1513) 61.5 (1562) 66.0 (1679) 69.0 (1753) 80.5" (2045) Clearance Circle (Front, less bucket) N 44.1 (1120) 43.4 (1102) 47 (1194) 48 (1219) 50.5 (1283) 54.0 (1372) 60.6" (1539) Clearance Circle (Front, w/bucket) O 69.4 (1763) 69.2 (1758) 74.5 (1892) 79.2 (2012) 82.0 (2083) 90.5 (2299) 101.7" (2583) Seat to Ground Height P 32.6 (828) 33.6 (853) 37.5 (953) 37.5 (953) 42.0 (1067) 43.3 (1100) 41.0" (1041) Rollback at Full Height Q º 86º 97º 97º 85º Dump Height R 84.5 (2146) 86.5 (2197) 89.5 (2273) 90.6 (2301) 93.5 (2375) 94.8 (2408) 107.0" (2718) Departure Angle S º 25º 26º 29º 21º Standard Tire Size 27 x 8.5 x 15 HD x 16.5 HD x 16.5 HD x 16.5 HD x 16.5 HD x 17.5 HD x 17.5 HD ENGINE Make Yanmar Yanmar Deutz Deutz Yanmar Yanmar Cummins Model 3TNV88 4TNV88 TD2009 TD2009 4TNV98T 4TNV98T B4.5T-99C Net Power RPM 35 hp 46 hp 62 hp 62 hp 84 hp 84 hp 99 hp Displacement (L) 100 cu. in. (1.64) 133 cu. in. (2.19) 140 cu. in. (2.3) 140 cu. in. (2.3) 202 cu. in. (3.3) 202 cu. in. (3.3) 275 cu. in. (4.5) HYDRAULIC SYSTEM Auxiliary Hyd. (L/min) 14.5 gpm (55) 16.5 gpm (62) 19 gpm (72) 19 gpm (72) 21.8 gpm (82.3) 21.8 gpm (82.3) 29 gpm (110) High-Flow Hyd.(L/min) option N/A N/A 30 gpm (114) 30 gpm (114) 36.9 gpm (139.6) 36.9 gpm (139.6) 41 gpm (155) Filtration 4 micron 4 micron 4 micron 4 micron 4 micron 4 micron 3 micron Reservoir Capacity 8 gal. (30.3) 8 gal. (30.3) 12 gal. (45) 12 gal. (45) 16 gal. (60) 16 gal. (60) 15 gal. (56.8) ELECTRICAL SYSTEM Battery 12-volt 12-volt 12-volt 12-volt 12-volt 12-volt 12-volt (675 CCA) (675 CCA) (950 CCA) (950 CCA) (950 CCA) (950 CCA) (675 CCA) Starter (kw) 12-volt (2.3) 12-volt (2.3) 12-volt (2.0) 12-volt (3.0) 12-volt (3.0) 12-volt (3.0) 12-volt (2.3) Alternator 40-amp. 40-amp. 80-amp. 90-amp. 90-amp. 90-amp. 40-amp CAPACITIES / WEIGHTS Rated Operating Load (kg) 1050 lbs. (476) 1350 lbs. (612) 1650 lbs. (748) 1900 lbs. (862) 2200 lbs. (998) 2600 lbs. (1179) 3850 lbs. (1747) Rated Operating Load 1175 lbs. (533) 1475 lbs. (669) 1800 lbs. (816) 2050 lbs. (930) 2500 lbs. (1134) 2900 lbs. (1315) Tipping Capacity (kg)*** 2100 lbs. (952) 2700 lbs. (1225) 3300 lbs. (1497) 3800 lbs. (1724) 4400 lbs. (1996) 5200 lbs. (2359) Fuel Tank (L) 10.3 gal. (38.9) 12.4 gal. (47) 15 gal. (56) 16 gal. (60) 19 gal. (72) 24 gal. (91) 30.5 gal. (115.4) Travel Speed - w/joystick (km/h) N/A N/A 7.7 mph (12) 7.7 mph (12) 7.6 mph (12.2) 8.6 mph (13.8) with 2-speed drive opt. (km/h) N/A N/A 12.4 mph (20) 12.4 mph (20) 11.5 mph (18.5) 13.1 mph (21.1) 12.5 mph (20) Travel Speed - w/o Joystick (km/h) N/A N/A 7.7 mph (12) 7.7 mph (12) 8.1 mph (13) 9.2 mph (14.8) max. (km/h) 5.9 mph (9.5) 5.4 mph (8.7) 12.4 mph (20) 12.4 mph (20) 12.3 mph (19.8) 13.9 mph (22.4) 7.5 mph (12) Operating Weight (kg) - approx lbs. (1814) 4600 lbs. (2087) 6200 lbs. (2812) 6700 lbs. (2764) 7880 lbs. (3574) 8140 lbs. (3692) 10,520 lbs. (4772) *Narrow width with new offset tire option

88 COMPACT TRACK LOADERS CTL65 / CTL75 / CTL85 Compact Track Loaders Features and Benefits High-powered, 4-cylinder, liquid-cooled and emission-certified diesel engines deliver up to 97 hp for exceptional performance. Two models are turbo-charged. Two-speed drive system utilizes hightorque, radial-piston motors with planetary final drives to match the application and speed of operations. SAHR (spring-applied, hydraulic release) multi-disc wet brakes respond quickly, holding the loader on any grade. Exceptional hydraulic power for dependable digging, especially in tough conditions. Hydraulic self-leveling lift action keeps loads balanced whenever the lift arm is raised. Elevated planetary final drives provide very efficient and durable transfer of power to the tracks. Tracks made of high strength rubber and steel reinforcement are designed to perform well on all types of terrain. Tracks roll on sealed steel rollers within the carriage and stand up in tough conditions. Dedicated undercarriage provides flotation needed for working in wet conditions and balanced traction needed for excavating. Tilt-back ROPS structure quickly reveals internal components for maintenance and service. Lift arm can be locked in raised position for safety and improved access to service points. Engine cover and rear door protect components and open for easy access to engine, air cleaner and more. Rear hydraulic cooling system swings out of the way for excellent rear engine access. SPECIFICATION CTL65 CTL75 CTL85 ENGINE Make/Model Yanmar/4TNV98 Yanmar/4TNV98T Kubota/V3800 DI-T Aspiration Natural Turbocharged Turbocharged Displacement (L) /Cylinders cu. in. (3.3) / cu. in. (3.3) /4 230 cu. in. (3.8) /4 Horsepower rpm 67 hp hp hp 2200 Max. Torque (Nm) 179 ft.-lbs. (243) 219 ft.-lbs. (297) 240 ft.-lbs. (325) PERFORMANCE Tipping Capacity - SAE J732 (kg) 4630 lbs. (2100) 5952 lbs. (2700) 7056 lbs. (3200) Rated Operating Load (kg) SAE 35% of tipping capacity 1620 lbs. (735) 2083 lbs. (945) 2470 lbs. (120) SAE 50% of tipping capacity 2315 lbs. (1050) 2976 lbs. (1350) 3528 lbs. (1600) Breakout Force (kn) Bucket 6724 lbs. (30.0) 7401 lbs. (32.9) 8669 lbs. (38.5) Lift Arm 6709 lbs. (29.8) 7425 lbs. (33) 8547 lbs. (38.0) ELECTRICAL Battery / CCA 12 volt / volt / volt / 800 Alternator 40 amp 50 amp 80 amp UNDERCARRIAGE Traction Pump / Traction Drive Piston / Planetary Piston / Planetary Piston / Planetary Traction Braking Hydraulic Hydraulic Hydraulic Drawbar Pull (kn) 9,918 lbs. (40.5) 11,067 lbs. (50) 13,766 lbs. (61.2) Roller Type / Track Rollers ea. side Steel / 4 Steel / 4 Steel / 5 Track Width 12.6" (320) 18.0" (457) 18.0" (457) Track Contact Length 55" (1389) 59.0" (1496) 63" (1598) Ground Pressure (kg/cm 2 ) 4.9 psi (0.34) 4.3 psi (0.29) 4.5 psi (0.31) Travel Speed (km/h) Low mph (0-7.2) mph (0-7.6) mph (0-7.8) High mph (0-10.9) mph (0-11.6) mph (0-12.0) HYDRAULIC SYSTEM Operating Pressure (bar) 2988 psi (206) 2988 psi (206) 2988 psi (206) Auxiliary Hyd. Flow (L/min) 18.4 gpm (68.5) 19.8 gpm (74.9) 23.4 gpm (88.6) Auxiliary Hyd. High-Flow - option (L/min.) N/A 36.3 gpm (137.5) 40 gpm (151.7) CAPACITIES Fuel (L) 19.8 gal. (75) 23.8 gal. (90.1) 28.5 gal. (107.9) Hydraulic Reservoirs (L) 10.2 gal (38.6) 12.8 gal. (48.5) 15.9 gal. (60.1) Engine Oil (L) 10.8 qt. (10.2) 10.8 qt. (10.2) 14.0 qt. (13.2) Engine Coolant (L) 17.4 qt. (16.5) 17.4 qt. (16.5) 17.4 qt. (16.5) DIMENSIONS & WEIGHT Operating Weight (kg) - approx lbs. (3635) 9700 lbs. (4400) 11,244 lbs. (5090) Max. Lift Height to Bucket Pin (mm) A 119.3" (3030) 122.9" (3120) 126.1" (3203) Dump Height (mm) B 93.3" (2370) 94.8" (2405) 95.7" (2430) Max. Lift (mm) C 28.8" (730) 34.4" (874) 38.8" (985) Dump Angle D Bucket Roll Ground Level E Length - w/o bucket (mm) F 109" (2756) 117.3" (2980) 123.5" (3135) Length - w/bucket (mm) G 140" (3543) 147.2" (3740) 156.9" (3985) Ground Clearance (mm) H 12.1" (310) 12.8" (325) 13.5" (345) Angle of Departure I Height - to top of ROPS J 84" (2123) 85" (2167) 91.3" (2320) Width -w/o bucket (mm) K 62.2" (1580) 70" (1770) 73.2" (1860) Overall Width - w/bucket (mm) L 70" (1778) 74" (1880) 86" (2134) Rear Clearance Radius (mm) M 61" (1549) 66" (1666) 72" (1816) Front Clearance Radius -w/bucket N 93" (2362) 90" (2294) 106.0" (2692) BUCKET Mounting Universal quick-attach Yes Yes Yes Capacity - SAE heaped (m3) 15.3cu. ft. (0.44) 17.0 cu. ft. (0.48) 22.0 cu. ft. (0.57)

89 TELESCOPIC HANDLERS RS Series Telescopic Handlers RS Series Telescopic Handlers The Gehl RS Series Telescopic Handlers have more lift height than ever before... up to 44' on the RS8. A true 4-story machine. All machines offer excellent visibility, superior load capacity, tight turning radius plus a great return on your investment. They feature: Extended lift heights on the RS6 and RS8, ranging from 42 to 44 feet, making them true 4-story machines. Redesigned ROPS canopy and enclosed cab for easy operator access to controls. Pilot-assisted hydraulic controls for boom, forks, frame, auxiliary and outriggers. Optional Personnel Work Platform (PWP) System. Increased load capacity on the RS6 to 6,600 lbs. SPECIFICATIONS RS6-34 RS6-42 RS8-42/44 CAPACITIES Lift Capacity (kg) 6,000 lbs. (2722) 6,600 lbs. (2944) 8,000 lbs. (3629) Max. Lift Height (m) 34'3" (10.4) 42' (12.8) 42'/44' (12.8/13.4) Capacity at Max. Lift Height (kg) 4,000 lbs. (1814) 6,600 lbs. (29442) 7,000 lbs. (3178) Max. Forward Reach (m) 23'3" (7.0) 28'3" (8.6) 28'3"/30'5' (8.6/9.3) Capacity at Max. Reach (kg) 900 lbs. (408) 1,000 lbs. (454)* 1,000 lbs. (454)* Max. Reach below Grade (mm) 24" (610) 14" (356) 14"/16" (356/406) *with outriggers up ENGINE Manufacturer John Deere John Deere John Deere Power (kw) Std. 99 hp (74) Std. 99 hp (74) Std. 115 hp (86) Opt. 115 hp (86) Aspiration Turbo Charged Turbo Charged Turbo Charged Model 4045T 4045T 4045T Rated Speed (rpm) COMPONENTS Transmission Dana 3-Speed Power Shift Dana 3-speed Power Shift Dana 3-speed Power Shift Max. Travel Speed (km/h) 20.2 mph (32.5) 18.8 mph (30.3) 18.8 mph (30.3) Steering 4-Wheel 4-Wheel 4-Wheel 2-Wheel 2-Wheel 2-Wheel Crab Crab Crab Brakes Internal Wet Disc Internal Wet Disc Internal Wet Disc 4-wheel Hydraulic 4-wheel Hydraulic 4-wheel Hydraulic Parking Brake SAHR (Spring-Applied, SAHR (Spring-Applied, SAHR (Spring-Applied, Hydraulic-Released) Hydraulic-Released) Hydraulic-Released) Axle Manufacturer Dana Dana Dana HYDRAULIC SYSTEM Pump Type Gear Gear Gear Total Capacity (L/min) 29 gpm (110) 40 gpm (151) 40 gpm (151) System Pressure (bar) 3000 psi (207) 3000 psi (207) 3000 psi (207) Hydraulic Tank Capacity (L) 35 gal. (133) 45 gal. (170) 45 gal. (170) GENERAL SPECIFICATIONS Approximate Weight (kg) 15,100 lbs. (6850) 22,000 lbs. (9979) 23,350/23,500 lbs. (10,591/10,659) Length - Less Forks (m) 16' (4.9) 19'1" (5.8) 19'1"/19'10" (5.8/6.1) Width (m) 7'10" (2.4) 8' (2.4) 8' (2.4) Ground Clearance (mm) 14" (350) 16" (400) 16" (400) Wheelbase (m) 9'2" (2.8) 10' (3) 10' (3) Turning Radius (m) 12'6" (3.8) 13'8" (4.2) 13'8" (4.2) Overall Height (m) 7'10" (2.4) 7'10" (2.4) 7'10" (2.4) Frame Leveling Fuel Capacity (L) 29 gal. (110) 47 gal. (178) 47 gal. (178) SPECIAL FEATURES Quick-Attach Bracket Dynattach std. Dynattach std. Dynattach std. TIRE OPTIONS RS6-34 RS6/ x 19.5/12 PR x 24/12 PR x 19.5/12 PR - Foam-Filled x 24/12 PR - Foam-Filled x 19.5 Solid Rubber x 24/12 PR - Rock x 24 Solid Rubber

90 TELESCOPIC HANDLERS DL Series Dynalift Maximum load capacities range from 7,000 to 12,000 pounds. Choice of low or high boom profiles. Boom length options with maximum lifts of 40', 42', 44' and 55'. Choice of lift- or loader-oriented tools. FEATURES AND BENEFITS Industry-leading turning radius of 12' 2" offers excellent maneuverability in confined spaces. Low-profile design allows it to easily pass under 8' doorways. All Dynalift Telescopic Handlers have 4-wheel, 2-wheel drive and 4-wheel crab-type steering. Side-mount engine design for easy maintenance access. Hydraulic frame leveling. Pilot assist multi-function joy stick. Automatic rear axle stabilization. Tight turning radius. Spacious, ergonomically designed operator station. Personnel Work Platform System. Standard 115 hp turbo charged engine. SPECIFICATIONS DL7-44 DL9-44 DL11-44 DL11-55 DL12-40 DIMENSIONS, MEASURES & WEIGHTS Overall Length less forks (m) 20'7" (6.3) 20'7" (6.3) 20'7" (6.3) 20'10" (6.4) 19'4' (5.9) Overall Height (m) 7'11" (2.4 7'11' (2.4) 7'11" (2.4) 7'11" (2.4) 7'11" (2.4) Overall Width (m) 8'1' (2.5) 8'3' (2.5) 8'3" (2.5 8'3" (2.5) 8'3" (2.5) Ground Clearance (mm) 16" (400) 16" (400) 16" (400) 16" (400) 16" (400) Outside Turning Radius (m) 12'2" (3.7 12'2" (3.7) 12'2" (3.7) 12'2" (3.7) 12'2" (3.7) Wheel Base (m) 10'8" (3.3) 10'8" (3.3) 10'8" (3.3) 10'8" (3.3) 10'8" (3.3) Fuel Capacity (L) 30 gal. (114) 30 gal. (114) 30 gal. (114) 30 gal. (114) 30 gal. (114) Hydraulic Oil Reservoir Capacity (L) 45 gal. (170) 45 gal. (170) 45 gal. (170) 45 gal. (170) 45 gal. (170) Operating Weight lbs. (kg) 23,250 (10,546) 24,650 (11,181) 25,400 (11,521) 28,460 (12,909) 25,300 (11,475) LIFT PERFORMANCE Rated Lift Capacity lbs. (kg) 11,000 (4999) 9,000 (4082) 11,000 (4990) 11,000 (4990) 12,000 (5443) Boom Length 44' 55' 40' Maximum Lift Height (m) 44'4" (13.5) 44'4' (13.5) 44'4' (13.5) 55'1" (16.8) 40'4" (12.3) Max. Lift Max. Lift Ht. lbs. (kg) 6,000 (2722) 7,000 (3175) 8,000 (3628) 5,000/ 5,500 (2268/2495)* 10,000 (4536) Maximum Forward Reach (m) 30'6" (9.2) 30'6" (9.2) 30'6" (9.2) 40'9" (12.2) 26'4" (8.0) Max. Lift Max. Fwd. Reach lbs. (kg) 1,000 (454) 1,500 (680) 2,000 (907) 2,000 (907) 2,000 (907) LOADER PERFORMANCE Breakout Force lbf. (kn) 11,000 (48.9) 12,500 (55.6) 14,000 (62.2) NA 14,000 (62.2) Maximum Dump Height (m) 42'11' (13.1) 42'11' (13.1) 42'11' (13.1) NA 39' (11.9) Max. Forward 45 Dump Angle (m) 14 3 (4.3) 14 3 (4.3) 14 3 (4.3) NA 11"10" (3.6) Dump Max. Dump Height NA 24 Maximum Loadover Height (m) 44'2" (13.4) 44'2" (13.4) 43'11" (13.4) NA 40'3" (12.3) Max. Dump 45 Dump Angle (m) 34' (10.4) 34' (10.4) 34' (10.4) NA 30'9" (9.4) Max. Forward Max. Dump Ht. (m) 2' 3" (686) 2' 3" (686) 2' 3" (686) NA 1'2" (356) Ground Level NA 30 Total Degrees of Bucket Rotation NA 132 ENGINE Engine: John Deere 4045T Yes Yes Yes Yes Yes Transmission: 4-Speed / Power-Shift Yes Yes Yes Yes Yes Power (kw) 115 hp (86) 115 hp (86) 115 hp (86) 115 hp (86) 115 hp (86) Max. Travel Speed (km/hr.) 22 mph (35.4) 22.8 mph (36.7) 22.8 mph (36.7) 22.8 mph (36.7) 22.8 mph (36.7) Steering 2-Wheel 4-Wheel Crab Brake Oil-Immersed, Disc-type Parking Brake Hydraulic Release Spring-Applied *With outriggers down

91 CARRIER/WHEEL LOADER THE ULTIMATE OFF ROAD CARRIER For safe operation on slopes, soft terrain and other potentially hazardous jobsites, the distinctive features on the Yanmar Carriers reduce risk and improve safety. Yanmar offers 3 Track Carriers with maximum payload rated at 2,540 lbs., 5,510 lbs. and 8,380 lbs. The compact model C12R offers optional 3-way dumping with a 0.48 heaped dump body capacity. The newest C30R-US is powered by a 3 cylinder 32.9 hp Yanmar diesel with travel speeds up to 6.8 mph. And the larger C50R features One-Touch Reversible Seat; creeper gearing and a powerful 91 hp Yanmar 4 cylinder EPA Compliant TNV diesel engine. The C12R Carrier Compact Versatile. Smooth HST Transmission. Only 38" wide for work in close quarters. Carry up to 0.48 cu. yd. heaped load. Loaded ground pressure of just 5.83 psi. Soft ground will love the C12R. C12R COMPACT WHEEL LOADER Class Leading Lift Capacities Yanmar offers two sizes of articulated wheel loaders - the.52 cu. yd. and the.65 cu. yd. Each model offers the same high performance, comfort and quality features that experienced contractors require. Class leading lift capacities V3-6,030 lbs., V4-6,945 lbs. Ultra smooth hydraulic performance. Single lever operation with automatic bucket leveling. Two-Mode control; choose fully automatic shifting or fixed speed mode. Rear Axle Oscillation transverse and delivers smooth power over uneven terrain. Powerful Yanmar 3 cylinder TNV EPA Compliant Diesel power

92 EXCAVATORS YANMAR Vio Series True Zero Tail Swing Excavators ViO17 ViO20-3 ViO27-5B ViO35-5B ViO45-5B ViO55-5B ViO75-C Operating Weight (Canopy) lbs. 3, ,850 10,275 11,532 17,530 Operating Weight (Cabin) lbs. 8,140 10,562 11,819 17,640 Yanmar Engine/Model HP (net) HP (gross) Digging Force (Bucket) (Arm) Hydraulic Pump Type lbs. lbs. 3TNV hp/2200 rpm 3,417 1,918 2 x Piston, 2 x Gear 3TNV hp/2400 rpm 20.1 hp/1400 rpm 3,987 3,057 3 x Piston, 1 x Gear 3TNV hp/2400 rpm 20.1 hp/1400 rpm 4,678 3,057 3 x Piston, 1 x Gear 3TNV hp/2300 rpm 7,220 4,410 2 x Piston, 2 x Gear 4TNV hp/2400 rpm 39.5 hp/2400 rpm 6,722 4,995 2 x Piston, 2 x Gear 4TNV hp/2400 rpm 39.5 hp/2400 rpm 7,598 5,062 2 x Piston, 2 x Gear 4TNV hp/2000 rpm 59.6 hp/2000 rpm 13,859 7,284 2 x Piston, 2 x Gear Pump Capacity gpm Auxiliary Flow gpm Main Relief Set Pressure psi ,553 Travel Speed (Low/High) mph 1.3/ / / mph/2.9 mph 1.4/2.8 mph 1.4 mph/2.7 mph 1.7 mph/2.9 mph Traction Force/ Draw Bar Pull lbs. 4,183 4,851 4,851 7,894 9,107 12,039 13,406 Fuel Tank Capacity gal Hydraulic Tank Capacity gal Ground Contact Pressure psi /4.68 (cabin/canopy) Lifting Capacity (Ground Level at MAX) lbs. 859 at 8'3" - 1,157 at 6'7" - 1,631 1,180 at 8'2" - 1,808 at 6'7" - 2,488 1,180 at 8'2" - 1,808 at 6'7" - 2,488 1,799 at 11'6" - 2,520 at 9'10" - 3,104 at 8'2" - 4, /4.19 (cabin/canopy) 2,115 at 13'2" - 2,564 at 9'10" - 3,638 at 8'2" - 4, /4.22 (cabin/canopy) 2,209 lbs. at 13'2" - 3,111 at 9'10" - 4,494 at 8'2" - 5, /5.06 (cabin/canopy) 3,682 lbs. at 16'5"-3,682 at 13'1"-5,722 at 9'10" - 7,

93 EXCAVATORS Easy and Comfortable Operation of True Zero Tail Swing Common Zero Tail models kept the overhang during turning to within just 10 percent of the crawler s width. VIO Series achieves the ultimate goal of no overhang at all. Since the counterweight and the front corners never extend beyond the machines width, there is not any concerns even on jobsites which are right up against a wall. The Equal Performance of Stability with Conventional Models The wide spacing of the distinctive YANMAR Offset Tracks achieves a good grip on the ground. The outstanding balance is further enhanced by the large counterweight. VIO Series also has VICTAS (VIO Crawler Technology By Advanced Stability) which provides an expanded track gauge for more stability. Fast and Easy Bucket Attachment Changing The Quick Coupler makes the once troublesome task of changing buckets fast and easy without even getting your hands dirty. It s all performed by switch operation while you remain seated, except for fitting and removal of the safety lock pin. It can also use attachments made by other companies, thereby reducing storage costs and saving space. Environmental Clean and Silent YANMAR Diesel Engine Equiped YANMAR Clean and Silent Diesel Engine with EGR system, in full compliance to Stage III A EC (EU) and the I - Tier 3 EPA (U.S.A.) regulations with clean exhaust and powerful output. Dimensions Unit: ft. in. (mm) A B C D E F G H I J Vio17 7'3" (2200) 7'7" (2310) 6'8" (1850) 12'2" (3710) 11'4" (3450) 5'0" (1525) 12'1" (3690) 8'8" (2630) 5'0" (1535) 7'7" (2300) Vio20-3 8' (2440) 8'7" (2620) 6'3" (1900) 13'8" (4160) 12'10"(3915) 6'2" (1890) 13'1" (4000) 8' (2450) 6'7" (2010) 7'10" (2400) Vio27-5B 9' (2750) 9'6" (2900) 7'9" (2350) 15'1" (4590) 13'9" (4190) 6'7" (2010) 15'2" (4620) 9'7" (2910) 6'11" (2120) 8'3" (2510) Vio35-5B 10'10" (3300) 11'4" (3450) 9'4" (2850) 17'2" (5220) 15'1" (4610) 6'11" (2112) 17'5" (5300) 11'8" (3550) 7'1" (2150) 8'3" (2510) Vio45-5B 12'1" (3680) 12'8" (3850) 8'10" (2700) 19'1" (5820) 17'3" (5260) 8'7" (2620) 19'6" (5950) 12'10" (3910) 7'8" (2340) 8'7" (2620) Vio55-5B 13'1" (3980) 13'8" (4160) 9'6" (2900) 20'4" (6200) 18'3" (5560) 8'7" (2620) 21'2" (6440) 14'5" (4400) 7'7" (2320) 8'7" (2620) Vio75-C 12'1" (3680) 12'8" (3850) 8'10" (2700) 19'1" (5820) 17'3" (5260) 8'7" (2620) 19'6" (5950) 12'10" (3910) 7'8" (2340) 8'7" (2620) 4 Vio17 K L M N O P Q R S 10" (260) 3'1" (950) 4'1" (1280) 9" (230) 7" (175) 5" (125) 2'01" (640) 1'04" (400) 3" (85) 2'1" (R640) Vio20-3 1'13" (360) 4'6" (1380) 10" (250) 11" (280) 8" (200) 2'4" (700) 1'7" (485) 4" (95) R2'3" (690) Vio27-5B 1'2" (350) 5'1" (1550) 10" (260) 1'1" (317) 6" (165) 2'9" (835) 1'7" (490) 4" (100) R2'7" (R775) Vio35-5B 1'5" (435) 5'1" (1550) 1'0" (300) 1'1" (319) 8" (215) 2'9" (835) 1'7" (490) 6" (150) R2'7" (R775) Vio45-5B 1'8" (500) 6'5" (1950) 1'2" (360) 1'2" (360) 2" (40) 2'7" (795) 2'2" (650) 5" (130) R3'2" (R975) Vio55-5B 1'8" (500) 6'6" (1990) 1'4" (400) 1'2" (360) 2" (45) 2'7" (795) 2'2" (650) 5" (130) R3'3" (R995) ViO75-C 1'6" (460) 7'5" (2270) 1'6" (450) 1'3" (380) 7" (180) 2'6" (770) 1'10" (550) 1" (30) 3'8" (1130)

94 COMPACT UTILITY LOADERS Boxer 300 Series Compact Utility Loaders Tip capacity of 1,250 lbs. Operating capacity: 625 lbs. at 50% tip load. Operating capacity: 438 lbs. at 35% tip load. Under 35" wide, fits through standard gate. Dedicated oil cooler to better manage hydraulic heat generation. Stand-On Platform for operator safety and comfort. Well balanced and stable, excellent ground speed and skid steer style controls. Boxer 400 Series Compact Utility Loaders Tip capacity of 1,800 lbs. Operating capacity: 900 lbs. at 50% tip load. Operating capacity: 600 lbs. at 35% tip load. Variable flow hydraulics. Dedicated oil cooler to better manage hydraulic heat generation. Stand-On Platform for operator safety and comfort. Well balanced and stable, excellent ground speed and skid steer style controls. Boxer 500 Series Compact Utility Loaders Tip capacity of 2,100 lbs. (526DX), 1,650 lbs. (530X) Operating capacity: 1,050 lbs. (526DX), 825 lbs. (530X) at 50% tip load. Operating capacity: 735 lbs. (526DX), 578 lbs. (530X) at 35% tip load. Variable flow hydraulics. Variable track widening system. Dedicated oil cooler to better manage hydraulic heat generation. Stand-On Platform for operator safety and comfort. Well balanced and stable, excellent ground speed and skid steer style controls. Specifications Model #320 Model #322D Model #427 Model #427W Model #532DX Model #530X Engine Power: 20 HP 22 HP 27 HP 27 HP 32 HP 30 HP Engine Manufacturer: Kohler Kubota Kohler Kohler Kubota Kohler Engine Description: Command Pro Gas D2902 Diesel Command Pro Gas Command Pro Gas D1105TD Diesel Command Pro Tip Capacity: 1250 lbs lbs lbs lbs lbs lbs. Hydraulic Pressure: 3000 psi 3000 psi 3000 psi 3000 psi 3000 psi 3000 psi Dump Height: 54" 54" 55.5" 55.5" 60" 60" Travel Speed: 3.4 mph 3.4 mph 3.5 mph 3.5 mph 3.7 mph 3.7 mph Ground Clearance: 5" 5" 7" 7" 5" 5" Ground Pressure: 3.2 psi 3.3 psi 3.6 psi 3.6 psi 3.4 psi Overall Length (without bucket): 68" 68" 70" 69.75" 77" 77" Operating Capacity, 35% of tip load: 438 lbs. 464 lbs. 600 lbs. 600 lbs. 735 lbs. 578 lbs. Operating Capacity, 50% of tip load: 625 lbs. 663 lbs. 900 lbs. 900 lbs lbs. 825 lbs. Hydraulic Auxiliary Flow: 8 gpm 9.4 gpm 12.6 gpm 12.6 gpm 14.5 gpm 14.5 gpm Flow Ground Drive: 3 gpm 9.4 gpm gpm gpm gpm gpm Overall Width (fully extended): 34.5" 34.5" 43.5" 43.5" " " Overall Operating Height (fully raised): 92" 92" 93" 93.25" 98" 98" Weight (without bucket): 1740 lbs lbs lbs lbs lbs lbs. Hinge Pin Height (fully raised): 70" 70" 70" 70" 76" 76" Track Width: 7" 7" 9" 9" 9" 9"

95 COMPACT UTILITY LOADER ATTACHMENTS Augers 6" - 36" diameter auger bits available 42" long / 2-9/16" round hub / 24" auger extension available separately High Torque Auger Power Head 170 lbs. Auger drive unit 14" H x 24" W x 27.5" L Leveler/Carry-All 134 lbs. 16" H x 48" W x 24" L For grading, backfilling trenches and carrying materials Standard Bucket 100 lbs. 4.0 cu. ft. w/ straight edge 44" W x 27" L (Bolt on tooth bar available) Hydraulic 4-in-1 Bucket 250 lbs. / 4.0 cu. ft. 20" H x 42.5" W x 27.5" L Hydraulic Tree Forks 170 lbs. Open to 30" Wide 12.5" H x 25" W x 47" L Grapple Bucket 260 lbs. 32" H x 44" W x 32" L Cement Bowl 75 lbs. 2.2 cu. ft. attaches to auger power head 20" H x 25.5" W x 22.5" L Angle Blade - 48" 300 lbs. Backfilling or grading, snow removal 22" H x 48" W x 29" L Multi-Purpose Tool (Tow ball not included) 120 lbs. 11.5" H x 24" W / Rippers, tree broom, tow hitch Power Rake 350 lbs. Manual angling Prepares soil for seeding or sodding 24" H x 58" W x 35.5" L Rotary Angle Broom 492 lbs. For sweeping sidewalks or snow removal 29.6" H x 51.25" W x 43" L Rubble Bucket 200 lbs. Removes rocks from tilled or loose soil 18.5" H x 48" W x 22" L tines Standard Trencher 450 lbs. 36" digging depth / 6" combo chain 24" H x 46" W x 36" L Hydraulic Sod Layer 100 lbs. Handles up to a half roll of sod 10.5" H x 38" W x 50" L Backhoe 863 lbs. Comes with 12" bucket w/ Upfit Kit 69" H x 42" W x 116" L Bore Drive Head and Rod & Reamer Kit 200 lbs. (bore drive head) 120 lbs. (kit) Turf Cutter 180 lbs. 12" cutting width Eliminator 240 lbs. For scarifying and debris removal 18" H x 42" W x 22" L Adjustable Forks 162 lbs. Complete unit 30" H x 32" L McCullough Cover-up 100 lbs. For backfilling trenches 42"/56.5" W x 27" L Tiller 250 lbs. 6" digging depth 20" H x 40" W x 24" L 4 4' - 5' rods, 1-3/4" mole, 2-1/2" reamer (Rod & Reamer Kit sold separately) Concrete Breaker 320 lbs. Impact rate bpm 10.5" H x 25" W x 55.5" L Heavy-Duty Grapple Fork 250 lbs. Grabs limbs and rocks for removal 32" H x 42" W x 32" L Plate Compactor 510 lbs. Plate: 43" x 48" 24" H x 43" W x 33" L / 1900 VPM

96 STUMP GRINDERS With different models, sizes, options and durable designs, Morbark has the right stump grinder to fit any application. Morbark D 52 SPH Morbark D 76 TrackT EQUIPMENT HIGHLIGHTS Patent-pending cutter arm system with long boom technology and hydrostatic drive. Piloted flange cutter head bearings increase bearing life and minimize exposure to dirt and debris. Stationary engine design maintains a low center of gravity and increases stability. Tail mounted operator s control station allows maximum visibility of grinding area. (D 52 SPH, D 76 SP 4 x 4) Hydrostatic motor with gear pump and hydrostatic transmission. Morbark stump grinders offer the widest boom swing arc radius in the business. D 52 SPH...52" D 76 SP 4 x 4 / D 76 Track...76" D 86 Track...86" Fully machined boom pivot assembly pivots on heavy-duty king pins within a lubricated assembly designed to reduce component flux and provide years of trouble-free service. SPECIFICATION D 52 SPH D 76 SP 4 x 4 D 76 Track D 86 Track Length 123"-139" 144"-160" 144"-160" 174"-190" Width 35" 35"-52" 35"-47" 35"-47" Height 66" 60" 62" 70" Weight 1,720 lbs. 3,680 lbs. 4,880 lbs. 5,760 lbs. Engine Kubota Caterpillar or Perkins Kubota Kubota Horsepower HP 62 HP HP HP Fuel capacity 10 gallons 10 gallons 23 gallons 23 gallons Hydraulic oil capacity 15 gallons 30 gallons 43 gallons 43 gallons Boom arc swing 52" 76" 76" 86" Boom travel up 19" 19" 19" 12" Boom travel down 12" 14" 14" 19" Tires / Track Tires (4) Tires (6) 20 x Tracks 72" L x 9" W Tracks 72" L x 9" W Primary drive Hydrostatic Hydrostatic Hydrostatic Hydrostatic Secondary drive Poly belt Poly belt Poly belt Poly belt Cutter wheel speed 1,200 RPM 1,200 RPM 1,200 RPM 1,250 RPM

97 CHIPPERS Morbark Beever M18R SPECIFICATIONS M18R Length (single axle) (tandem axle) 17' 8" 18' 7½" Height 9' 6" Width (single/tandem axle) (single axle dual wheel) 7' 7" 8' 5" Gross weight 10,200-12,200 lbs. Chipping capacity 18" Horsepower HP EQUIPMENT HIGHLIGHTS 2" x 6", fully boxed, extended steel frame. Patent pending Variable Force hydraulic down pressure system with 700 lbs. of perpetual down pressure. Reversing automatic feed system. Patented 36" diameter staggered knife pocket drum with (4) 10-1/2" long chipping knives, removable knife holders and 36" diameter, 8-blade, chambered air impeller system. B-loc chipper drum bushings provide secure shaft mounting and eliminate drum walking associated with taper lock bushings. Additional 1000 lbs. of yoke down pressure at valve handle. Morbark Beever M8D SPECIFICATIONS M6R M8D Operating length 12' 8" 15' Transport length 11' 6" 12' 7" Height 6' 2" 7' 4" Width 4' 8" 5' 3" Gross weight 1,770 lbs. 2,150-2,750 lbs. Chipping capacity 6" 8" Horsepower 27 HP HP EQUIPMENT HIGHLIGHTS Direct Drive. Single top feed wheel compression system with spring assisted down pressure. Automatic feed system. Folding infeed tray. EQUIPMENT HIGHLIGHTS Morbark Beever M12R Track 72" long x 9" wide rubber track drive system. Multi-function radio remote control with tethered back-up system in. 2 infeed opening with 180 in. 2 throat opening. Steel guard enclosing valve bank components. Morbark Beever M12R 18" top feed wheel with combination serrated teeth and knife bars. Drive belt inspection cover provides ease of drive system maintenance. Hydra-Lift Compression system with spring assisted down pressure. 360º manual crank swivel discharge. Morbark Beever M14R / M15R TorqMax Top Feed Wheel Compression System with 3:1 torque amplification. 21" diameter, 8-blade, chambered air-impeller system. 360º manual crank swivel discharge with infinite rotation. Reliable and proven Twin Disc friction clutch. Reversing Automatic Feed System reduces wear and increases knife life. Variable Force Hydraulic Down Pressure System creates 600 lbs. of perpetual down pressure. (M15R) Morbark M20R Track Caterpillar 312B track drive system. 15-function radio remote control with tethered back-up system. 28" wide infeed opening provides straight, flow through material passage. Bearing style pivot assembly contours the radius of the drum. Beever M14R M20R TorqMax Plus Top Feed Wheel Compression System with 2:1 torque amplification. 36" diameter, 6-knife staggered knife pocket drum with chambered, 4-blade air impeller system Reversing Automatic Feed system with PDCJ1939 Auto Sense controller reduces wear and increases knife life. Variable Force Hydraulic Down Pressure System creates 450 lbs. of perpetual down pressure. 4 SPECIFICATIONS M12R TRACK M12R M14R M15R M20R TRACK M20R Length 14' 8" 15' 9" 15' 6" 16' 2" 17' 2" (w/o infeed deck) 19' 1" 21' 4" (with infeed deck) Height 8'-9' 8' 5" 8' 10" 8' 11" 9'-10' 9' 2" Width 6' 3" 5' 11" 6' 11" 7' 1" 8' 2" 8' 5½" Gross weight 6,414 lbs. 5,500 lbs. 6,050 lbs. 7,500 lbs. 18,240 lbs. 13,900 lbs. Chipping capacity 12" 12" 14" 15" 20" 20" Horsepower HP HP HP HP HP HP

98 AUGERS AUGERS EDGE Planetary Drive The gear reduction drive units are designed for heavy-duty use in commercial and industrial applications. Planetary drive features high torque, easy hookup and heat treated drive shafts. 2-9/16" Round Model Hydraulic Requirement Max. Auger Bit Size Theo 2500 psi Average Speed PA-225EU gpm (56-113Lpm) 36" (914mm) 2531 lbs.ft Nm gpm Part Number Description Weight PA225EU Planetary Round Auger Drive (does NOT include mount, hoses or couplers) 370 lbs. AUGER MOUNTS Auger Mounts are available for Case, Caterpillar, Ford, Gehl/Mustang, John Deere, Kobelco, Komatsu, Kubota, IHI, Scat Trak, Takeuchi, Terex, Thomas and Volvo excavators in numerous different models. 2-9/16" STANDARD DUTY AUGER BITS Feature a reinforced fabricated boring head and double wrapped flighting, heat treated teeth and fishtail center point. They are approximately 50" in overall length and available for round or hex drive augers. Part No. Description Bit Size No. of Teeth Overall Length Wgt. lbs " (102mm) Auger Bit - Round 4" 2 50" " SQ (152mm) Auger Bit - Round 6" 2 50" " SQ (229mm) Auger Bit - Round 9" 4 50" " SQ (305mm) Auger Bit - Round 12" 4 50" " SQ (381mm) Auger Bit - Round 15" 6 50" " SQ (457mm) Auger Bit - Round 18" 6 50" " SQ (508mm) Auger Bit - Round 20" 7 50" " SQ (610mm) Auger Bit - Round 24" 9 50" " SQ (762mm) Auger Bit - Round 30" 11 50" " SQ (914mm) Auger Bit - Round 36" 13 50" /16" TREE AND SHRUB AUGER BITS Are designed with smaller diameter auger flighting at the bottom, which leaves a space for root balls, fertilizer or mulch. Part No. Description Bit Size No. of Teeth Overall Length Wgt. lbs TSQ 18" (457mm) Tree & Shrub Auger Bit - Round 18" 8 42" TSQ 24" (610mm) Tree & Shrub Auger Bit - Round 24" 9 42" TSQ 30" (762mm) Tree & Shrub Auger Bit - Round 30" 12 42" TSQ 36" (914mm) Tree & Shrub Auger Bit - Round 36" 14 42" /16" STANDARD ROCK AUGER BITS Feature a reinforced fabricated boring head, double wrapped flighting, conical carbide teeth and a standard fishtail center point. These bits are not intended for use in concrete or asphalt applications. Part No. Description Wgt. lbs " (152mm) Rock Auger Bit with Standard Point - Round " (610mm) Rock Auger Bit with Standard Point - Round " (914mm) Rock Auger Bit with Standard Point - Round /16" CONICAL ROCK AUGER BITS Feature a reinforced fabricated boring head, double wrapped flighting, conical carbide teeth and a conical bullet-tooth center point. These bits are not intended for use in concrete or asphalt applications. They are available in 9", 12", 15", 18" and 24" bit sizes

99 BUCKETS / GRAPPLES BUCKETS CEAttachments offers more than 60 skid-steer dedicated buckets to choose from. Options include: dirt/construction buckets, low profile, bulk material/snow buckets and general purpose buckets. GRAPPLES Designed for handling awkward materials such as logs, tree stumps, brush or other loose materials. Full featured grapples include hardened pin, cushioned cylinder kit and cylinder hose guard. EDGE Dirt/Construction Buckets EDGE dirt buckets have a back height of 20.5" (20.75" for heavyduty dirt buckets) and front to back depth of 37". Often used in heavy digging conditions or in grading. Bolt-on edges and toothbars are common accessories for these buckets. Part No. Description Wgt. lbs ' Extended dirt bucket 3/4" x 6" edge " Extended dirt bucker w/6 weld-on teeth " Extended dirt bucket, bolt-on edge " Extended dirt bucket w/7 weld-on teeth " Extended dirt bucket, bolt-on edge " Heavy-duty dirt bucket w/8 weld-on teeth " Heavy-duty dirt bucket, bolt-on edge " Extended dirt bucket w/8 weld-on teeth " Extended dirt bucket w/9 weld-on teeth " Extended dirt bucket, bolt-on edge " Heavy-duty dirt bucket, bolt-on edge " Heavy-duty dirt bucket w/9 weld-on teeth " Extended dirt bucket, bolt-on edge " Heavy-duty dirt bucket w/9 weld-on teeth " Heavy-duty dirt bucket no bolt-on edge " Extended dirt bucket w/10 weld-on teeth " Heavy-duty dirt bucket w/10 weld-on teeth " Heavy-duty dirt bucket no bolt-on edge " Heavy-duty dirt bucket no bolt-on edge " Heavy-duty dirt bucket w/11 weld-on teeth 909 BRUSH ROOT RAKE HEAVY-DUTY BTR Part No. Description Wgt. lbs BTR 78" (1981mm) Brush/Trash/ 993 Root Rake with Grapple Full Feature Universal Mount Model Open Height No. of Tines Cylinder BTR 78" HD 44.9" 8 Cushioned The grapple bucket attachment s basic design allows it to load and grapple large and/or uneven objects as well as clean up the smallest debris. Our grapple buckets feature enclosed cylinders and hoses to protect against debris and stray limbs. 4 GRAPPLE BUCKET Standard-Duty Part No. Description Wgt. lbs GB66U: 66" (1727mm) Standard- 847 Duty Grapple Bucket Universal Mount - includes hoses and couplers Model Width Opening Height End Plates GB 66 66" 51" Not available Dirt buckets offer the greatest breakout force, excellent visibility to the cutting edge, and lowest capacity. They are used for construction, landscaping or other heavy-duty applications

100 BACKHOE / TRENCHER BACKHOES The backhoe attachment gives you the power to handle excavation jobs with your skid steer loader, dig utility trenches and septic tanks quicker. Metered spools on the control valves produce smooth and precise control of the backhoe movement. The operator platform has a tapered console for increased foot area and greater operator comfort. EDGE BACKHOES, SKID STEER Model Dig Depth Optimum Performance With: Dig Force Stabilizers/Width BH509 9'8" 8-12gpm (36-55Lpm) Hydraulic Systems 5676 lbs. (25.2kN) Fold-Down 7'11" MAIN FRAME: Part No. Description Wgt. lbs BH509 Backhoe Base Unit (add backhoe and loader half mounts and bucket) BH609 Backhoe Base Unit with vertical stabilizer (add backhoe and loader half mounts and bucket) 1460 OPTIONS: Rubber Stabilizer Pad Set for 509 Backhoe 70 TRENCHERS Features of these trenchers include a 50,000 lb. (22,680kg) digging chain, removable double-flighted spoil auger and sealed, tapered roller bearings in the nose. Includes hoses and couplers. MODEL XR-14 48" Depth Model Hydraulic Requirement Hydraulic System Cutting Width Cutting Depth XR gpm (38-75 Lpm) Standard Flow 6", 8", 10", 12" 48" Universal Mount 48" Depth Part No. Description Wgt. lbs XR-14 Trencher 48" x 6" width, with half rock and frost, Gehl 25 series mount XR-14 Trencher 48" depth x 6" width, single standard chain, Universal mount XR-14 Trencher 48" depth x 6" width, double standard chain, (ABF) Universal

101 LAND CLEARING ATTACHMENTS Rakes Collect rocks and debris and till compacted soil to create the perfect seedbed. (Preparator is a registered trademark of FFC/Sweepster, Inc.). Includes hoses and flat-faced couplers. PREPARATOR Model Hydraulic Requirement Picks up: No. of Teeth Bucket Capacity FP gpm (37-94 psi Rocks 1"-20" diameter c.f. struck Part No. Description Wgt. lbs Universal Mount FP66U 66" (1676mm) Preparator FP66U 66" (1676mm) Preparator for Gehl 25 Series FP66 66" (1676mm) Preparator for Gehl EDGE Rotary Brush Mower Brush mowers from CEA feature a direct drive hydraulic motor requiring gpm. It is designed to cut through the thickest brush and glide over the roughest terrain. Features a heavy-duty stump jumper and includes hoses and flat-faced couplers. Model Part No. Description Hydraulic Flow Wgt. lbs. 60S Universal Mount 60" (1524mm) Rotary Brush Mower gpm S Mustang single pin 60" (1524mm) Rotary Brush Mower gpm 875 EDGE Hopper Brooms The bi-directional hopper broom is ideal for material pickup, road maintenance and jobsite cleanup. There is no caster wheel so you can get right up next to objects and have better contact with the sweeping surface. Complete with hoses and couplers. 4 Model Hydraulic Requirement Overall Width Brush Diameter Cubic Feet Heaped RHB gpm (53-94 Lpm) 77.8 (1976mm) 26" (660mm) 16.8 Part No. Description Wgt. lbs RHB72: 72" (1828mm) Hopper Broom, Universal Mount RHB72: 72" (1828mm) Hopper Broom with Gehl 25 Series

102 SKID STEER ATTACHMENTS HARD SHOE TRACKS Better traction can mean better performance. Surfaces made slippery due to sand, snow, mud and rain may mean challenges, but not excuses. Tracks from CEA provide protection and reduce tire wear in abrasive conditions. CEA has every set of tracks for every skid steer loader, for 10.00, 12.00, 14.00, tires. We can provide Ladder Style - Grouser, Hard Pad Style - Grouser, Soft Pad Style - Grouser, Ladder Style to fit your model of skid loader. Your Hawkins-Graves representative has charts to give you the Part No. for your required tracks as well as any accessories needed. Hard Tracks Example: Part Number Description Wgt. lbs Grouser hard shoe tracks to fit tires - 48 pads (24 per side) 1055 will accommodate 38" to 40.5" wheelbase EDGE Pallet Forks Hydraulically controlled pallet fork rotation right from the cab of your skid steer loader. Tines are manually adjustable. Rotating Pallet Forks Pallet Forks Part No. Description Capacity Degree of Rotation Length of Tines Wgt. lbs Rotating Pallet Fork 3700 lb. 180 Degrees 48" 700 Side Shift Pallet Forks Part No. Description Capacity Travel Length of Tines Wgt. lbs Side Shift Pallet Fork frame 3700 lb. 8" Right or Left 48" 790 Sliding Tine Pallet Forks Part No. Description Capacity Length of Tines Wgt. lbs Pallet Fork with sliding tines 3700 lb. 48"

103 THUMBS / EXCAVATOR BUCKETS THUMBS Specifically designed to aid in handling or loading irregular shaped objects that a bucket alone can t handle. Because it easily retracts back against the dipper, it can be left on the machine during normal excavation. HYDRAULIC, DUAL-TINE THUMB Hydraulic thumbs feature a cylinder to adjust thumb placement. These skid steer loader thumbs are available for Bobcat, Gehl/Mustang, Komatsu, Kubota, Scat Trak, Takeuchi, Terex, Thomas and Yanmar. Contact your Hawkins-Graves representative and when ordering, please specify machine model, bucket model and quick coupler used. Does not include hoses or hydraulic couplers Hydraulic Thumb RIGID, DUAL-TINE THUMB When ordering, please specify machine model number. HEAVY-DUTY BUCKETS, EXCAVATOR Heavy-duty buckets are designed for tough clay with rock scattered through the soil. They are not designed for the prying required to dig solid rock. Extra heavy-duty buckets are designed for shot rock and demolition. These excavator buckets are available for Bobcat, Gehl/Mustang, Daewoo, JCB, John Deere, Kobelco, Komatsu, Kubota, Nagano, Scat Trak, Takeuchi, Terex, Thomas, Volvo and Yanmar. Contact your Hawkins-Graves representative with your machine model. CEMETERY BUCKETS Cemetery buckets are designed with extra bucket rotation incorporated to enable the operator to dig the straight vertical walls as well as flat bottoms. These buckets are available for Bobcat, Caterpillar, Gehl/Mustang and John Deere. 4 DITCHING BUCKETS Ditching buckets are specifically designed for ditch construction and maintenance. They are also useful in grading and slope work. They do not have teeth and are not designed for tough digging applications

104 HYDRAULIC COMPACTORS TC SERIES TC Hydraulic Compactors FEATURES and BENEFITS: High Performance, Low Maintenance Motor design requires minimal oil flow leaving sufficient oil for effective boom movement. Optional high or low flow motor configurations allow you to match the motor to your specific hydraulic requirements. Flow control valves, standard on the TC51 and optional on the TC71, protect the rotating group from over-speeding, ensuring optimum operating speeds by returning excess flow to the tank. High frequency operation and high ground pressure are standard to achieve maximum proctor densities and high lifts. Internal anti-cavitation valves permit the motor to slow down safely after shutting off the control valve, eliminating shock loading to the rotating group. Oil Bath Lubrication ensures continuous bearing lubrication and eliminates the need for manual greasing. Rubber Isolators prevent vibration in the upper structure, delivering maximum energy through the base plate and into the soil, providing excellent proctor densities. The TC92 and TC152 lattice design places the isolators in compression not in shear. This extreme duty lattice design excels in continuous compacting applications, helping to resist extreme downward force while providing optimum dampening. Mounting Brackets range in variety of configurations, including dedicated, swivel and variable pin center (QA), to meet most interface requirements. Swivel Top Mounts are available on the TC71, TC92 and TC152 compactors. Controlled compaction is achieved by locking the swivel mount in different positions of 45 degree increments. By removing the pin, the compactor can free float. Universal Adjustable Boss Both the QA Swivel and QA Non-swivel mounts come with BTI s unique adjustable boss mounting system which allows adjustment of the pin spacing to accommodate quick-coupler installations on most common rubber tire backhoes. Specifications TTC51-L/FC TC51-H/FC TC71 TC71/FC TC92 TC152-L TC152-H TC301-L TC301-H Minimum Carrier Size lbs. (kg) Maximum Carrier Size lbs. (kg) Operating Weight 1 lbs. (kg) Impulse Min. RPM lbs. (kg) Impulse Max. RPM lbs. (kg) Ground Min. RPM psi (bar) Ground Max. RPM psi (bar) Minimum Flow Rate US gpm (lpm) Maximum Flow Rate US gpm (lpm) 2,000 (907) 10,000 (4,535) 295 (134) 1,930 (875) 3,000 (1,361) 7 (0.48) 10.9 (0.75) 7.2 (27.2) 12 (45.4) 2,000 (907) 10,000 (4,535) 295 (134) 1,930 (875) 3,000 (1,361) 7 (0.48) 10.9 (0.75) 10.7 (40.4) 18 (68.0) 5,500 (2,494) 15,500 (7,029) 610 (277) 2,600 (1,179) 5,000 (2,268) 7 (0.48) 13.6 (0.94) 11.7 (44.2) 16.3 (61.6) 5,500 (2,494) 15,500 (7,029) 610 (277) 2,600 (1,179) 5,000 (2,268) 7 (0.48) 13.6 (0.94) 11.7 (44.2) 22 (83.2) 7,700 (3,492) 25,300 (11,474) 1,130 (512) 5,500 (2,494) 8,200 (3,719) 9.2 (0.63) 13.7 (0.94) 20.6 (77.9) 25.2 (95.3) 15,400 (6,984) 48,400 (21,950 ) 1,820 (825) 11,130 (5,048) 16,630 (7,542) 11.2 (0.77) 16.7 (1.15) 26.7 (100.9) 32.7 (123.6) 15,400 (6,984) 48,400 (21,950) 1,825 (828) 11,130 (5,048) 16,630 (7,542) 11.2 (0.77) 16.7 (1.15) 37.4 (141.4) 45.7 (172.7) 14,500 (6,576) 105,600 (47,891) 2,150 (975) 16,330 (7,406) 24,400 (11,066) 13.4 (0.92) 20 (1.38) 37.4 (141.7) 45.7 (172.7) 14,500 (6,576) 105,600 (47,891) 2,155 (977) 16,330 (7,406) 24,400 (11,066) 13.4 (0.92) 20 (1.38) 53.5 (202.2) 65.3 (246.8) Minimum Flow RPM 1,800 1,800 1,800 1,800 1,800 1,800 1,800 1,800 1,800 Maximum Flow RPM 2,240 2,240 2,500 2,500 2,200 2,200 2,200 2,200 2,200 Operating Min. Flow 2 psi (bar) Operating Max. Flow 2 psi (bar) Max. Relief Valve Setting psi (bar) 920 (63) 1,135 (78) 2,800 (193) 700 (48) 860 (59) 2,800 (193) 820 (57) 1,130 (78) 2,800 (193) 920 (63) 1,230 (85) 2,800 (193) 970 (67) 1,200 (83) 2,800 (193) 1,600 (110) 1,964 (135) 2,800 (193) 1,190 (82) 1,460 (101) 2,800 (193) 1,480 (102) 1,820 (126) 2,800 (193) 1,080 (74) 1,330 (92) 2,300 (159)

105 COMPACTION EQUIPMENT BT60/4 Vibratory Tamper BVP10/36, BVP18/45 Vibratory Plates Dimensions in inches (mm) B H L L1 W BT60/ (350) (960) (735) (335) (280) Standard Equipment BT60/4 Electronic Ignition. Oil Lubrication. Corrosion-free plastic fuel tank. Polyethylene shoe with steel wear plate. Centrifugal clutch. Infinitely variable frequency. Safe operation, anti-vibration handle with shut-down switch. Large capacity air filter. Diaphragm carburetor. Recoil starter with integral guard. Narrow bellows. Engine protection guards. TECHNICAL DATA BT60/4 Dimensions in inches (mm) H H1 L L1 W BVP18/ (535) (915) (1115) (558) (450) Standard Equipment Honda engine with oil alert. Vibration isolated engine. Removable, foldable, vibration isolated steering handle. Wear resistant base plate with reinforced sides. Self-cleaning base plate. Engine protection frame. Balanced lifting point. Carrying handles. Bolt on exciter housing. Centrifugal clutch. Fully enclosed V-belt. Weights Basic weight... lbs. (kg) 134 (61) Operating weight CECE...lbs. (kg) 137 (62) Driving Characteristics (depending on site conditions) Working speed max....ft./min. (m/min) 65.6 (20) Area coverage max....sq.ft./h (m 2 /h) 3616 (336) Drive Engine manufacturer... Honda Type... GX 100 (4-cycle) Cooling... Air Number of cylinders... 1 Performance ISO hp (kw) 3.4 (2.5) Displacement...in 3 (cm 3 ) 6.0 (98) Speed...rpm 4200 Fuel... gasoline Fuel consumption max....gal./h (l/h) 0.2 (0.8) Starting device... recoil starter Vibratory System Drive system... mechanical Frequency...vpm (Hz) ( ) Jumping Height...in. (mm) 2.4 (60) Impact force...lbs. (kn) 3035 (13.5) Compaction depth max....in. (cm) 21.7 (55) Capacities Fuel...gal. (l) 0.8 (3) Lubricating oil (tamper cylinder)...gal. (l) 0.3 (1) TECHNICAL DATA BVP18/45 Weights Basic weight...lbs. (kg) 198 (90) Operating weight...lbs. (kg) 201 (91) Surface load...lb./in. 2 (kg/m 2 ) (570) Dimensions Working width...in. (mm) 17.7 (450) Driving Characteristics (depending on site conditions) Working speed max. ft./min. (m/min.) 82 (25) Max. gradeability...% 30 Drive Engine manufacturer... Honda Type... GX 160 Cooling... Air Number of cylinders... 1 Performance ISO hp (kw) 4.8 (3.6) Speed...rpm 3600 Drive system... mechanical Fuel... gasoline Vibratory system Frequency...vpm (Hz) 5400 (90) Centrifugal force...lbs. (kn) 4050 (18) Capacities Fuel...gal. (l) 1.0 (3.6) Water...gal. (l) 1.8 (7)

106 ASPHALT PAVER RAISING THE BAR: THE 1648 Plus PAVER Its 8'5" width requires less trailer space, leaving more room for additional equipment. Two fullyadjustable screed options provide paving widths from 4*-13' (*with cut-off plates and baffles). Two-burner propane heating system. Dual-speed ground drive system provides infinite paving control to a maximum of 130 FPM in high range. 48 hp Yanmar diesel engine runs quietly and provides 10% more horsepower than competitive models. Redesigned hydraulic hose-routing system. FEATURES: Convenient dual-controls on the left and right sides for one- or twoperson operation. Excellent hopper visibility, which allows for a smooth and efficient paving job. Exhaust diverter valve (available on the 1448), allows the operator to choose between exhaust through the muffler. Dual-burner propane heat is standard on the PowerBox Asphalt Pavers deliver what professional pavers need most: consistent performance and a quality paving job, which lead to repeat business and referrals. Designed to handle all kinds of commercial and municipal appllications, these machines really perform for the contractors who make their living from the platform of a paver. SETTING THE STANDARD: THE 1448 Plus PAVER Compact 8'5" size makes it easy to transport and perfect for smaller jobs. A single-speed drive with FPM for quick, efficient paves. Operator station features a single-span platform. Exhaust- or propane-heated screed. Asphalt Box Paver Specifications 1448 Plus 1648 Plus DIMENSIONS, MEASURES & WEIGHTS Overall Height (mm) 6' 11" (2108) 7' 1" (2172) Transport Width (mm) 8' 5" (2565) 8' 6" (2591) Operating Width (mm) 10' 9" (3277) 10' 5" (3175) Length (mm) 7' 4" (2235) 9' 7" (2921) Truck Clearance (mm) 23" (584) 23" (584) Operating Weight (kg) 7775 lbs. (3527) 10,600 lbs. (4808) ENGINE Model Yanmar / Diesel Yanmar / Diesel Net Power RPM 36 hp 3000 rpm 48 hp 3000 rpm Fuel Tank 8 gal. (30) 12.5 gal. (47.3) SCREED Full Floating & Adjustable (mm) 8-12" ( ) 8-13" ( ) Vibratory 2500 vpm maximum 3000 vpm maximum Exhaust-Heated Standard N/A Propane-Heated Option Standard Hydraulic Extensions (mm) 24" (610) w/strike-off 30" (762) w/ 6" (152) wear plate Crown / Invert Adjustment (mm) Dual Lever, 0"- 2" (0-51) Single Lever, 0"- 3" (0-76) MATERIAL FLOW Independent Hydraulic Operated Gates Standard Standard Gate Cut-Off Plates (mm) Option, 6"- 36" ( ) Option, 6"- 36" ( ) Gravity Flow Asphalt Hopper Capacity (kg) 4 tons (3629) 6 tons (5443) Independent Hydraulic Operating Augers Located on the Gate Located on the Gate or Screed Extension DRIVE CONFIGURATION Speed (m/min) Single, 0-80 FPM (24) Single, FPM (40) Self-Adjusting, Steel Track (mm) 12" x 3" (305 x 76) 12" x 3" (305 x 76) Counter-Rotating Standard Standard OPERATOR STATION Platform Single-Span Isolated Dual-Span Controls Left and Right Sides Left and Right Sides Muffler w/exhaust Diverter Valve Standard N/A Wash-Down Stations (L) Single, 5 gal. (18.9) Dual, 5.5 gal. (21) HYDAULIC SYSTEM Variable Hydrostatic Drive Pump (L/min) 17.0 gpm (64.4) 37.0 gpm (140.0) Hydraulic Auger Drive Pump (L/min) 7.5 gpm (28.4) 10.9 gpm (41.3) Hydraulic Cylinder Pump (L/min) N/A 10.9 gpm (41.3) Hydraulic Oil Cooler Capacity (L/min) 12.0 gpm (45.4) 32.0 gpm (121.1) Hydraulic Reservoir (L) 18.0 gal. (68) 20 gal. (76)

107 TANDEM VIBRATORY ROLLERS Dimensions in inches (mm) A B C D H H1 H2 K L O S W BW90AD (1282) (956) (458) (580) (1482) (2300) - (250) (1862) (28) (12) (900) BW (1143) (956) (458) (560) (1620) (2340) - (363) (2080) (28) (8) (900) BW100AD (1728) (1076) (475) (700) - (1800) (2475) (255) (2475) (38) (13) (1000) TECHNICAL DATA BW90AD-2 BW900-2 BW100AD-4 Weights Basic Weight with ROPS...lbs (kg) 3053 (1385) 2502 (1135) 4807 (2180) Operating Weight... lbs (kg) 3351 (1520) 2923 (1326) 5291 (2400) Average axle load... lbs (kg) 1675 (760) 1462 (663) 2646 (1200) Average static linear load CECE. pli (kg/cm) 47.0 (8.4) 41.2 (7.36) 67.2 (12.0) Dimensions Working width... in (mm) 35.4 (900) Length with ROPS...in (mm) 76.1 (1934) 81.9 (2080) 97.4 (2475) Track Radius, inner...in (mm) 77.6 (1970) 63.8 (1620) (2720) Driving Characteristics (depending on site conditions) Speed (with vibration)...mph (km/h) (0-4.5) (0-4.0) (0-6.5) Speed (for transport)...mph (km/h) 0-5 (0-8) (0-7.0) (0-12) Max. gradeability without/with vibration...% 40/30 40/30 40/30 Drive Engine manufacturer... Kubota Honda Kubota Type... D 722 E3B GX620 D 1703 M Cooling - cylinders... water air water Number of cylinders Performance ISO 9249 (max)...hp (kw) 16.6 (12.4) 17.7 (13.2) 33.8 (25.2) Speed (max)... rpm Throttle position Throttle position Electric Equipment...V Drive System... hydrostatic hydrstatic - Drum Driven... front + rear front + rear (Series) - Brakes Service brake... hydrostatic hydrostatic hydrostatic Parking brake... SAHR SAHR SAHR Steering Steering system oscillating, articulating Steering method... hydrostatic hydrostatic hydrostatic Steering angle ±...degrees Oscillating angle ±...degrees Vibratory system Vibrating drum... front + rear front front + rear Drive system... hydrostatic hydrostatic hydrostatic Frequency...vpm (Hz) 3600 (60) 3900 (65) 3300/4200 (55/70) Amplitude...in (mm) (0.5) (0.5) (0.5) Centrifugal force (each drum)...lbs (kn) 3600 (16) 3150 (14) 5175 /8550 (23/38) Water Spray System Type of water spray system... pressurized gravity pressurized Capacities Fuel...gal (l) 6.1 (23) 9 (34) 10.6 (40) Water...gal (l) 26.4 (100) 50 (189) 58.1 (220) Standard Equipment Hydrostatic travel and vibration drives. Bolt-on oscillating/articulation joint. Hydrostatic articulated steering. Spring-Applied, Hydraulically- Released (SAHR) parking brakes on each drum. Vibration control in travel lever. 2 scrapers per drum. Plastic water tank. Pressure sprinkler system with interval timer. Control and warning indicator lights for: - Engine oil pressure - Battery - Brakes Hour meter / Fuel level indicator. Lockable engine cover. Vandal protected instrument panel. Transport lifting points - front, central and rear. Emergency stop button. Rear drum vibration lock out. Corrosion and weather protected ignition switch. ROPS with seat belt. Back-up alarm

108 TRENCH ROLLERS BMP851 Multi-Purpose Compactor BMP8500 Multi-Purpose Articulated Compactor Dimensions in inches (mm) A D H K L S W W1 BMP (820) (500) (1200) (240) (1760) (25) (610) (850) Dimensions in inches (mm) A D H K L S W W1 BMP (1000) (520) (1275) (222) (1897) (25) (610) (850) TECHNICAL DATA BMP851 BMP8500 Weights Basic weight... lbs. (kg) 3395 (1540) 3583 (1625) Operating weight CECE...lbs. (kg) 3413 (1548) 3622 (1643) Average axle load CECE...lbs. (kg) 1706 (774) 1811 (822) Dimensions Working width...in. (mm) 24.0/33.5 (610/850) 24/33.5 (610/850) Driving Characteristics (depending on site conditions) Speed (1), forward/ reverse... mph (kmph) (0-1.2) (0-1.3) Speed (2), forward/reverse...mph (kmph) (0-2.7) (0-2.5) Max. gradeability without/with vibration...% 55/45 55/45 Drive Engine manufacturer... Hatz Kubota Type... 2G 40 D1005 Cooling... Air Water Number of cylinders Performance ISO hp (kw) 18.8 (14) 19.4 (14.5) Speed...rpm 2,800 2,600 Fuel... diesel diesel Drive System... hydrostatic hydrostatic Drum Driven... 4 front and rear Brakes Service Brake... hydrostatic hydrostatic Parking Brake... SAHR SAHR Vibratory System Vibrating drum... central vibrator front and rear Drive system... hydrostatic hydrostatic Frequency...vpm (Hz) 1920 (32) 2520 (42) Amplitude...in. (mm) (2.1) 0.022/0.044 (0.56/1.12) Centrifugal force...lbs. (kn) (80) 8000/16000 (36/72) Capacities Fuel...gal. (l) 5 (19) 6.3 (24) Hydraulic...gal. (l) 10 (38) - Engine oil...gal. (l) 0.7 (2.5) - Steering Steering System... - articulated Steering method... - hydrostatic Steering angle +/ º Standard Equipment BMP851 / BMP8500 Articulated steering. (BMP8500) Dual function cabled / radio remote control box. Standard dual working widths of 24 and 33.5 inches. 1 inch padfoot. High centrifugal force and amplitude. Infinite speed control. Electric start. (BMP851) 2 travel speed ranges. Spring-Applied, Hydraulically-Released (SAHR) parking brake. Balanced, hinged center lift point. Swing out/up covers. 2 scrapers per drum. Exciter directional change with manual override. (BMP851) Two selectable amplitudes. (BMP8500) Double exciter system with direct vibration. (BMP8500) Intelligent Vibration Control (IVC). (BMP8500) Reversing protection bow. (BMP851) Diagnostic module with failure codes. (BMP8500) Diesel filter with water separator. (BMP8500)

109 TRENCH ROLLER RT 82-SC Vibratory Trench Roller Item Number Smart trench rollers for tough compaction applications Wacker Neuson s articulated trench rollers feature a dual joystick control box for easy steering. This Smart Control (SC) system uses an infrared signal with lineof-sight control for added safety. If the operator comes within 3.3 feet (1 meter) of the roller s front or rear sensing eye with the control box, the unit will stop moving and vibrating. A smart machine for any jobsite. Standard Package includes operator s manual, parts book and CE certificate. Features and Benefits A patented below the axle exciter in each drum allows for more efficient transfer of compaction energy to the soil for superior compaction results. The Engine Control Module (ECM) with diagnostic LEDs monitors all the engine functions such as oil pressure, radiator fluid level, engine temperature, glow plug, battery, tip angle and air cleaner capacity for easy operation and troubleshooting. Design patented RT rollers feature an easy to open hood made from a heavy-duty molded material that is extremely durable, rust-free and virtually dent-free. Removable fuel and hydraulic tanks along with hydraulic connectors located on one side of the unit provide for easy accessibility and improved overall serviceability. These trench rollers are ideally suited for the compaction of sub bases for foundations, roads and parking lots; the sheepsfoot drums and vibration speed also offer optimum compaction of cohesive soils. Technical Data Description Metric Imperial Operating weight 1.473kg 3,247 lb. Drum diameter 520mm 20.5 in. Drum width 820mm 32 in. Overall size l x w x h x 820 x 1.230mm 73 x 32 x 48,5 in. Shipping weight (including packaging) 1.557kg 3,434 lb. Shipping size x 890 x 1.385mm 89 x 35 x 54.5 in. Engine Type Lombardini, 3 cylinder liquid-cooled, electric start diesel Displacement 916cm 3 56 in. 3 Max. power output according to DIN-ISO ,6kW 21 hp Operating power according to DIN-ISO ,5kW 18 hp Operating speed /min. 2,600 rpm Fuel consumption 5,6 l/hr. 1.5 US gal./hr. Fuel tank capacity 24 l 6.3 US gal. Vibration frequency 41,7 Hz 2,500 vpm Dynamic (centrifugal) force total 34,2/68,4kN 7,700/15,400 lb. Static linear force per drum 9,6 N/mm 54.6 lb./in. Dynamic linear force per drum (max.) 45,3 N/mm 258 lb./in. Lift: soil up to 75cm up to 29.5 in. Low Speed 20 m/min. 66 ft./min. High Speed - forward only 40 m/min. 131 ft./min. Compacted area 972 m 2 /hr. 10,560 ft. 2 /hr. Gradeability without vibration 50 % 50 % Gradeability with vibration 45 % 45 % Turning radius - inside 1,6m 63 in. Infrared wireless battery capacity 8 hr. 8 hr. Battery recharge time Max. distance for infrared control 14m 45 ft. Specifications may change due to continuous product development

110 HYDROGRASSER HYDROGRASSERS HG-30GX gallon total slurry volume. 99 HP emissions certified turbo diesel. All iron ANSI centerline discharge pump design minimizes maintenance requirements. Exclusive fiber mulch grinder/blender system offers fast loading of charged materials. Anti siphoning fill assembly is standard. HG-13GX gallon total slurry volume. Dual mixing/blender system HP EC water cooled diesel engine. Spray bar and hose reel options. Truck bed or chassis mount options. Exclusive fiber mulch grinder. Anti siphoning fill assembly is standard. Optional remote fill pump package. HG-20GX gallon total slurry volume. 99 HP emissions certified turbo diesel. All iron ANSI centerline discharge pump design minimizes maintenance requirements. Exclusive fiber mulch grinder/blender system. Truck bed or chassis mount options. Spray bar and hose reel options. Anti siphoning fill assembly is standard. HG-10GX gallon total volume. Exclusive fiber mulch grinder. Multi-flow blenders speed charging HP EC water cooled diesel engine. Truck bed mount or trailer options. Spray bar and hose reel options. Anti siphoning fill assembly is standard. Optional remote fill pump package. HG-15GX gallon total slurry volume. 66 HP emissions certified diesel. All iron ANSI centerline discharge pump design minimizes maintenance requirements. Exclusive fiber mulch grinder/blender system offers fast loading of charged materials. Anti siphoning fill assembly is standard. HG-5GX3 625 gallon total volume. Variable speed hydraulic blender. 20 HP air cooled Honda engine. ANSI style centerline discharge pump. Standard spray boom discharge. Anti-siphoning fill assembly. Truck mount (skid) or trailered versions

111 HYDROGRASSER HYDROGRASSER FEATURES HYDROGRASSER MODEL 2P 2PA 5H3 5H3A 10GX3 10GX3A 13GX3 15GX3 20GX3 30GX3 CAPACITY WORKING VOLUME (Water) 200 (757 l) TANK VOLUME (Slurry) GRANULARS (Max) Lbs. (kg) FIBER MULCH (Max) Lbs. (kg) 250 (900 l) 80 (40) 100 (45) 200 (757 l) 250 (900 l) 80 (40) 100 (45) 500 (1895 l) 625 (2360 l) 800 (400) 250 (110) 500 (1895 l) 625 (2360 l) 800 (400) 250 (110) 1000 (3785 l) 1250 (4750 l) 2500 (1100) 500 (200) 1000 (3785 l) 1250 (4750 l) 2500 (1100) 500 (200) 1300 (4921 l) 1550 (5900 l) 3100 (1400) 650 (290) 1500 (5678 l) 1850 (7000 l) 5000 (2200) 750 (340) 2000 (7570 l) 2350 (8900 l) 6500 (2900) 1000 (453) 3000 (11356 l) 3500 (13000 l) (4535) 1500 (700) EFFECTIVE RANGE SPRAY BOOM Feet (m) 125 (38) 125 (38) 130 (40) 130 (40) 130 (40) 160 (49) 160 (49) 160 (49) WITH EXTENSION HOSES* Feet (m) 180 (54) 180 (54) 250 (76) 250 (76) *RATINGS OFFERED WITH OPTIONAL HOSE PACKAGE CARRYING CAPACITIES. DIMENSIONS LENGTH WIDTH HEIGHT WEIGHT BASIC UNIT Lbs. (kg) FULLY CHARGED Lbs. (kg) POWER UNIT STANDARD ENGINE 4'-2" 2'-9" 3'-7" 775 (351.5) 2735 (1240.6) BRIGGS I/H 11' 6'-8" 5'-3" 1510 (684.9) 3470 (1573.9) BRIGGS I/H 8'-1" 4'-11" 6'-7" 1750 (793.8) 7000 (3175.9) HONDA GX670 15'-0" 6'-10" 8'-0" 3500 (1587.6) 8500 (3855.5) HONDA GX (121) 12'-4" 6'-4" 8'-0" 3500 (1587.6) (6509.0) KUBOTA V1505B1 400 (121) 19'-6" 7'-2" 10'-2" 5500 (2494.8) (7560.2) KUBOTA V1505B1 400 (121) 12'-3" 7'-6" 7'-10" 3800 (1723.8) (7983.2) KUBOTA V1505B1 350 (106) 14'-6" 7'-11" 8'-2" 6000 (2723.6) ( ) JOHN DEERE 4024T (106) 16'-7" 7'-11" 8'-1" 7000 (3175.2) ( ) JOHN DEERE 5030T (106) 18'-10" 7'-11" 8'-10" 8500 (3855.5) ( ) JOHN DEERE 5030T270 HORSEPOWER (kw) 8 (6) 8 (6) 20 (14.9) 20 (14.9) 33.5 (25) 33.5 (25) 33.5 (25) 66 (50.7) 99 (74) 99 (74) COOLING AIR AIR AIR AIR WATER WATER WATER WATER WATER WATER PUMP SIZE 3x3 3x4x7 3x4x8-1/4 4x6x10 4x6x10-7/8 4x6x10-5/8 PSI PARTICAL CLEARANCE 1-1/2" 1-1/8" 1-1/8" 1" MATERIAL POLY ALL IRON ALL IRON ALL IRON BEARING LUBRICATION OIL OIL OIL OIL OIL SEAL MS DMS DMS DMS FILL ASSEMBLY ANTI-SIPHONING - Standard 2" 2" 2" 2" 2" 2" 2" 2" 2" 2" (Air Gap) OPTIONAL 1-1/2" 1-1/2" 1-1/2" 1-1/2" 2" 2" 2" 2" 2" 2" (Air Gap) OPTIONAL " 3" 3" 4 MOUNTING SKID TRAILER SKID TRAILER SKID TRAILER SKID SKID SKID SKID AXLE - SINGLE - SINGLE - TANDEM STANDARD BRAKES - ELECTRIC - ELECTRIC - ELECTRIC STANDARD HITCH - 2" BALL - LUNETTE - LUNETTE TRUCK REQUIREMENTS RECOMMENDED GVW (Min) 5,000-14,000-23,000-25,000 38,000 44,200 64,000 CAB TO AXLE DIMENSION " - 102" 102" 120" 132" 144" Tongue Weight EMPTY Tongue Weight CHARGED SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

112 MULCHERS POWER MULCHERS TM-JR-H20 20 HP direct drive engine. 120 bales per hour rating. 35 ft. direct discharge in still air. Discharge and suction hose options. Dry granular broadcast option. Optional FMVSS trailer adds versatility. Exclusive two-year warranty. MT-2000 Combination TM-35 power mulcher and material trailer. 14 ft. work deck area carries up to 1 ton of material. Discharge 65 ft. in still air. Removable forward rail facilitates material loading. Heavy-duty tandem trailer package. Exclusive two-year power mulcher warranty. M HP direct drive turbo diesel. Rated 20 tons per hour mulch output. Discharge up to 100 ft. in still air. Automatic bale segmenting. Variable speed hydraulic feed system. Exclusive two-year warranty. TM HP EC diesel engine package. 5 ton per hour mulch output. Discharge 60 ft. in still air. Discharge and suction hose options. Dry granular broadcast option. Exclusive two-year warranty. M HP direct drive water cooled diesel. Rated 10 tons per hour mulch output. 85 ft. direct discharge in still air. Discharge hose placement option. FMVSS standards heavy-duty trailer. Optional brake and hitch configurations. Skid mount version minimizes vehicle requirements. Exclusive two-year warranty. POWER MULCHER MODEL TM-JR-H20 TM-35 TM-35X MT-2000 M-65 M-90 CAPACITY TONS PER HOUR (Tonnes) 1½ to 2 ( ) 4 to 5 ( ) 5 to 7 ( ) 10 (9.1) 20 (18.1) SEED DISTRIBUTOR OPT 1.4 bu 2 bu. 2 bu. 2 bu. N/A DISCHARGE RANGE Ft. (m) STANDARD 35 (11) 60 (18) 65 (20) 85 (26) 100 (30) W/ EXTENSION HOSES 125+ (38) 150+ (46) 150+ (46) 185+ (46) 200+ (46) SUCTION 50 (15) 50 (15) 50 (15) - - DIMENSIONS LENGTH WIDTH HEIGHT 4'-3" (1.24m) 2'-9" (.81m) 3'-7" (1.05m) 6'-7" (2.1m) 3'-8" (1.12m) 5'-4-1/2" (1.7m) 11'-10" (3.6m) 7'-6" (2.4) 7'-2-1/2" (2.2m) 19'-6" (2.34m) 7'-6" (2.4) 7'-2-1/2"* (2.2m) * TM-35 INSTL 11'-10" (3.6m) 7'-11-1/2" (2.4) 7'-2-1/2" (2.2m) 18'-3" (5.6m) 6'-10" (2.1) 8'-10" (2.7m) WEIGHT STANDARD Lbs. (kg) 425 (193) 1200 (544) 1850 (839) 2700 (1225) 2400 (1090) 4400 (1995) POWER UNIT GASOLINE HONDA V HORSEPOWER (Kw) 20 (14.9) COOLING AIR DIESEL KUBOTA KUBOTA KUBOTA DEERE - V1505B1 V1505B1 V2403MT 4045H HORSEPOWER (Kw) (25) 33.5 (25) 56 (41.8) 115 (85.7) COOLING - WATER WATER WATER WATER MOUNTING SKID SKID TRAILER TRAILER TRAILER TRAILER STANDARD AXLE - - SINGLE TANDEM SINGLE SINGLE RATING (Per Axle) Lbs STANDARD BRAKE ELECTRIC - - STANDARD HITCH - - 2"BALL LUNETTE LUNETTE LUNETTE SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

113 David White LEVELS / TRANSITS L6-20N Meridian Level 22X Level-Transit 1/4-in.(6mm) at 100-ft.(30m) leveling accuracy Up to 200-ft.(60m) range Horizontal circle Lock and tangent screw Versatile- ideal for leveling foundations, driveways, patios, floors, sills, for grading streets, curbs, ditches; for alinging fences; or any other light construction job Built-in sunshade- for clear sightings LT8-300LP Universal Level-Transit 26X Level-Transit ±3/16-in.(4.75mm) at 150-ft.(45m) leveling accuracy Up to 400-ft.(120m) range Horizontal circle, lock and tangent Vertical arc, lock and tangent 1:100 stadia with glass reticle Laser Plummet Class 2M LT6-900N Meridian Level-Transit A rugged instrument that handles horizontal and vertical work with ease and accuracy. 22X Level-Transit 1/4-in.(6mm) at 100-ft.(30m) leveling accuracy Up to 200-ft.(60m) range Horizontal circle Lock level Vertical arc Clamp and tangent screws Ruggedly built and time-proven, handles both horizontal and vertical light construction jobs LT8-300LTP Line Transfer Unit The LT8-300LTU with 360 telescope rotation allows you to see directly below the instrument for pipe laying applications. 26X Level-Transit ±3/16-in.(4.75mm) at 150-ft.(45m) leveling accuracy Horizontal circle, lock and tangent Vertical arc, lock and tangent 1:100 stadia with glass reticle Laser plummet Class 2M DWT-10 Electronic Digital Transite/Theodolite 30X Magnification 1/16-in.(1.5mm) at 100-ft.(30m) leveling accuracy Up to 400-ft.(120m) 5-second vertical and horizontal angular readout Dual LCD display Vertical angle measuring Optical plummet Zero resetting Built-in battery pack

114 PIPE LASER SANITARY & STORM SEWERS PIPE JACKING TUNNELING GradeLight2700 Easy Aligment High Visibility LED Line Pivot Point is a fast reference for centering. Easily seen from outside the manhole. Grade Reference Points on both sides make it easy to set elevation. Large Display is Viewable from Outside Most Manholes Line Indicator show the beam position relative to the adjustment range. Status at-a-glance shows self-leveling staus, battery indicator, electronic level vial showing cross axis level position and lock status of laser and remoter. Unique Dual Color Grade Display Color changes to denote Positive or Negative Grade (to.001% increments) to minimize costly input errors. Remote Control (Optional with Above Ground Package) Moves the beam left or right for line and puts the laser in standby or locked modes. Press to quickly re-center adjustment range. SIMPLE Up +% Down -% Left Right Operation Enter Grade with a Rolling Counter or Digit Select Method Press and hold a grade button for a few moments. After release, it will automatically increase (or decrease) until you press the key again to stop. Grade can also be entered by selecting the digits using the ENT key. Press +% -% to reset to zero grade. Press to reset line adjust range. Set Up... The Way You Work In The Pipe Above Ground Open Cut Tight Pre-poured Inverts or Small Manholes Flat Bottom Manholes Drop Manholes GRADELIGHT Self-Leveling Range +45% to -15% Grade Range +40% to -10% Grade Entry Rolling counter or digit select Grade Display 0.001% Azimuth Range Total range: 20 ft. at 100 ft./ (6m at 30m) Accuracy ± 1/16" at 100' (±5mm at 100m; ±10 sec.; ±.005%) Cross Axis Leveling Manual Beam Type/Output Visible laser diode, 635nm, < 5mW, Class 3R Environmental IP68; nitrogen purged Power Supply 1) Rechargeable lithium ion battery pack 2) 110/230V AC converter (charge and run simultaneously) 3) Spare battery compartment for 4 D alkaline batteries 4) Optional 12V power cord Battery 32ºF/0ºC 40 hrs. Li-ion battery; 50 hrs. alkaline Charging Time 5 hrs. maximum Mounting 5/8 x 11 (female mounting thread) Operating Temperature -4º to 122ºF (-20º to +50ºC) Storage Temperature -4º to 140ºF (-20º to +60ºC) Size Diameter: 5.5" (140mm), Length: <10.5" (265mm) Weight 7.6 lbs. (3.5kg) with alkaline battery Warranty 1 year (2/3 year optional warranties) REMOTE CONTROL Operating Range 600' (190m) front (through the pipe); 25' (7.6m) from rear batteries 3 AA alkaline Battery LIfe 2,000 hrs. (1 year) Dimensions 4.7" x 2.35" x 1.2" (119 x 60 x 30mm)

115 LASER LEVELS EAGL Laser Levels Highly accurate instruments for today s tight job requirements... and tough, easy-to-use construction tools EAGL 3000S, 2000, 1-Touch SPECIFICATIONS All EAGL models have a visible red beam; rotation speed is 600 rpm EAGL 3000S EAGL 2000 EAGL 1-Touch Applications: Establishing elevation and grade stakes. Setting concrete forms and footings. Sub base leveling. Wet screeding concrete. Excavating for foundations, footings, drain lines and septic systems. Machine control and topography applications. Basically ALL Leveling applications. Accuracy Better than 1/16" in 100 ft. ± 4mm/100m; ± 8 arc secs. Range (diameter) 3,000 ft. (900m) 2,000 ft. (600m) 1,500 ft. (450m) Horizontal Self-Leveling Range ± 7% (± 4º) Battery Life 100 hrs. w/(4) D alkaline batteries: 40 hrs. w/optional rechargeable pack Matching Slope ± 6% manual slope in X axis; y axis is self-leveling Hi Alert X X Windy Mode X X Operating Temperatures -4º to 122ºF (-20º to 66ºC) Environmental IP55 water and dust resistant Size 8" H x 6.5" W x 6" D (20 x 16 c 15cm); 5 lbs. (2.3kg) Warranty 2 year drop 2 year 1 year Detector / Rod Clamp Included LS100 LS100 LS50 (rod and tripod sold separately) EAGL H The EAGL H features: Brushless Motor Design that reduces wear and tear on the laser providing for longer product life, as well as providing unparalleled battery life of up to 160 hrs. on 2 standard flashlight batteries. Accuracy of 100 ft. and a working range of 1000 ft. in diameter. Dual Manual Grade of ± 10% in both the X and Y direction. The H.I. Alert system protects against erroneous reading by shutting down the laser and warning the user that the instrument has been moved from its original position. SPECIFICATIONS Working Range 1000 ft. with LS100 Detector Accuracy ± 100 ft. Self Leveling Range 0% (5.7 degrees) Grade Matching Yes, ± 10% in both X and Y Axis Laser Diode <5mW, Class 3R, 635nm Power 2 D-Cell and NiCad Rechargeable Battery Life D-Cell: 120 hrs., NiCad: 40 hrs. Rotation Speeds 0, 90, 600 RPM Brushless Motor Design Yes Environmental IP54 for water and dust resistance System includes: EAGL H Laser, LS100 Detector, Alkaline Battery Tray, NiCad Battery, Charger, Manual and Carrying Case

116 CONSTRUCTION LASERS EZ Dig Pro The EZ Dig Pro provides precise grade control for digging a fixed depth or a slope, without the expense of another person in the excavation to check depth. The machine stays productive! The calibrated system ensures consistent and accurate grade readings, saving time and money by reducing over-cutting. If you ve been checking grade with a laser or optical instrument and grade rod, using this system will keep the machine and operator fully productive. If you ve been using a machinemounted laser receiver, there s no need to stop digging to place the bucket and dipper stick in the same vertically plumb position each time you want an accurate reading. Features: The EZ Dig Pro can be installed and calibrated in 45 minutes or less using its patent-pending software. Sensors are wireless; no cables at the pivot points. No welding or wrenches needed. Sensor solar panels maintain the charge of the built-in batteries automatically throughout the day. Strong rare earth magnets hold securely. Displays Real-Time Depth throughout the whole digging process. GradoPlane 25 Automatic Dual Grade Laser Package Includes: 1. Control box 2. In-cab display 3. Pointer laser for calibration setup 4. 3 angle sensors (one with a laser receiver) 5. 3 mounting plates (use is optional) 6. Removal tool for magneticallyattached sensors 7. Charger, to supplement solar charging 8. Option: 4th sensor for dual boom excavator or chassis EZ DIG PRO SPECIFICATIONS Accuracy ± 3/8" (1cm) Slope Capability ± 300% Environmental Sensor IP68; control box & display: IP64 Operating Temperature -4 to 158 F (-20 to +70 C) Storage Temperature -22 to 176 F (-30 to +80 C) Warranty: 1 year Advanced Performance, Yet Easy and Efficient to Use Fast Automatic Self-Leveling The GradoPlane 25 levels up fast, even when inputting the maximum 25% grade. Saves time, especially when multiple grade breaks are needed or when matching an existing slope. Simple to Use, Even for Advanced Functions After turning the unit on, there are just four buttons that control all laser functions. Easy, intuitive screen selections allow you to quickly set advanced functions or change the laser setup. Two-Way Remote Speeds Setup and Operation Make grade changes from anywhere on the jobsite using the full-function RF remote. Saves time when you re balancing the pad -- use the wireless remote to adjust the laser s grade from the cab and quickly finish the job. LCD display and grade and enter buttons are the same as on the laser. Automatic shut-off conserves battery power. Can select backlit display. GRADOPLANE 25 SPECIFICATIONS Operating Range 2,500 ft. (750m) diameter Self-leveling Accuracy ± 1/16" at 100 ft. (1.5mm at 30m, 10 arc secs.) Self-leveling Range ± 5 (also manual mode for special applications) Grade Capability -5 to +25% in either axis; (-5 to +15% in both axes) Rotation Speeds 300, 600, 900 and 1,200 rpm Laser Diode Infrared 780nm invisible, Class 1 Battery Type D alkaline or NiMH rechargeable Battery Life 8 alkaline Up to 130 hrs. 2 NiMH Packs Up to 100 hrs. Operating Temperature -4 to 122 F (-20 to 50 C) Environmental Waterproof to IPX-7 standard Dimensions 10.4" x 10.2" x 8" (265 x 260 x 200mm) Weight 11 Ibs. (5kg) without batteries Warranty One year REMOTE CONTROL SPECIFICATIONS Distance 200 ft. (60m) typical Battery Type Four AAA alkaline Size 6" x 2.8" x 1.8" (155 x 70 x 45 mm); 14 oz. (410g) GradoPlane 25 laser package includes: LS100 detector Remote 1 rechargeable battery pack AC charger Package also available without remote. Optional accessories: alignment scope,12v power cable and additional rechargeable battery pack

117 LASER ROD / BEAM DETECTOR SmartRod All-in-one: laser receiver, grade rod, digital measuring tape Automatically calculates cut-and-fill Makes work quicker and easier SPECIFICATIONS Range* ** >9'-10"/3m to working range of laser Accuracy ±3/32" / ±2.5mm Range of reading Elevations from 3.3 ft. to 13.2 ft. /1m to 4m Units Feet/10ths/100ths Feet/inches/16ths Metric Beam capture angle 120 minimum Laser detection window 6.5" / 165mm Detectable laser beam 610nm to 780nm Battery life Control panel: 3 x AA, min 60 hrs. Receiver: 3 x AA, min 3,000 measurements Standby of capture mode 30 seconds Automatic shut-off 5 minutes Operating temperature 14 F to 122 F / -10 C to + 50 C IP protection IP54 Weight 8 lbs. / 3.6kg Warranty 1 year * At short range, below 3m, high output lasers can cause inconsistent readings. Please restrict use of SmartRod in short range. ** Depends on laser and distance Beam reception Caption window is so much larger! 6.5" on the SmartRod vs. 2.5" on a standard detector (16.5cm vs. 6cm). Linear Receiving Technology (LRT): the beam only has to touch some part of the window; it does not need to be in the center. SmartRod finds the center. It s easy to find the beam, even down in a trench where you can t see the laser! Modes Elevation reading. Cut and fill. Tape measure mode: measure interior heights without a laser. Applications: Checking elevations. Cut-and-fill measurements. Working to a fixed reference, as for setting forms. Creating benchmarks and offsets. Height or length measurements (electronic tape measure mode). LS100 Detector and Rod Clamp 4 Convenient front and rear displays. Deadband choices: fine, medium, wide. Display channels: 11 on LCD; 5 on LED. LEDs for use in low light or above eye level, or for long range jobs like slope match. Bubble vial on clamp to plumb rod Clamp also fits round or oval rods

118 SKID-STEER AND FORKLIFT BUCKETS HEAVY-DUTY SKID-STEER BUCKETS Star has the skid-steer buckets you need. Options include: Bolt-On-Blade. Large series 23 pin-on teeth welded into bucket. New Improved Bucket Design STRONGER AND BETTER Low Profile Dirt Buckets Designed to let you see the leading edge from the operator s seat for better bucket control. A size and style for every material Low Profile Utility Fertilizer Snow & Litter Light Material Dirt SLIP ON THE FORKS FORKLIFT BUCKETS SELF-DUMP BUCKETS (Turns a straight-mast forklift into a loader) Universal fit slip on the forks (Fits all extendible-reach forklifts) Model 1400B 60" wide 1.0 cu. yd. capacity Model 1406B 72" wide 1.2 cu. yd. capacity Model 1408B 95" wide 1.6 cu. yd. capacity Model 1408BHC 95" wide 2.0 cu. yd. capacity QUICK-TACH FORKLIFT BUCKETS Quick-Tach bucket replaces forks and carriage. All buckets available with bolt-on blade for longer life. MANUAL DUMP BUCKETS Model Width Capacity Weight 1440SD 45" ID 0.25 cu. yd. 420 lbs. 1445SD 45" ID 0.50 cu. yd. 445 lbs. 1472SD 72" ID 0.75 cu. yd. 710 lbs. HYDRAULIC DUMP BUCKETS 1445SDH 45" ID 0.50 cu. yd. 510 lbs. 1472SDH 72" wide 0.75 cu. yd. 710 lbs. Built to fit your specific make and model perfectly Increases bucket life up to 3 times or longer. Model " wide 0.8 cu. yd. capacity Model " wide 1.0 cu. yd. capacity Model " wide 1.25 cu. yd. capacity Model 1460HB 60" wide 1.0 cu. yd. capacity Model 1472HB 72" wide 1.25 cu. yd. capacity Model 1496HB 96" wide 1.65 cu. yd. capacity Model 1496HC 96" wide 2.0 cu. yd. capacity HB Series required with Gehl Dynacarrier, JCB QFit and Pettibone

119 FORKLIFT ATTACHMENTS FORK LIFT ATTACHMENTS QUICK-TACH TRUSS BOOMS EXTEND YOUR REACH Model ' reach 10,000 lbs. capacity Model ' reach 2,000 lbs. capacity Model ' reach 2,000 lbs. capacity Model 1325 Wide 12' reach 2,000 lbs. capacity Model ' reach 2,000 lbs. capacity Model 1335 Wide 15' reach 2,000 lbs. capacity Heavy-duty CONCRETE HOPPERS HEAVY-DUTY JIB Extends 7' to 12' Model 1360B LIFT LONG FLEXIBLE MATERIAL Model ,000 lbs. cap. Places concrete in hard to reach areas, grouts masonry walls. Saves the cost of renting a pump or crane. SPREADER BARS Universal fit - slip on the forks Model ,000 lbs. cap. extends 8-12' Model ,000 lbs. cap. extends 12-20' Model ,000 lbs. cap. extends 22-38' Model ,000 lbs. cap. extends 20-30' CONCRETE HOPPERS Manual Dump Model cu. yd. cap. Model cu. yd. cap. Hydraulic Dump Model 1550H 0.5 cu. yd. cap. Model 1575H 0.75 cu. yd. cap. HANDLE TRASH Model 1820 Use on roof tear-off jobs, renovation projects or anywhere intermediate handling of trash is needed. 4 Trash Hoppers Universal fit slip on the forks Open in front for easy loading. Model ' x 5' x 5' 2.7 cu. yd. cap. Model ' x 5' x 5' 3.7 cu. yd. cap. Model ' x 5' x 7' 5.0 cu. yd. cap. Self-dumping Hoppers Universal fit slip on the forks Model 1805N 0.5 cu. yd. cap. Model cu. yd. cap. Model cu. yd. cap. Model cu. yd. cap. Model cu. yd. cap. Casters optional

120 SKID-STEER LOADER ATTACHMENTS SKID-STEER FORKFRAMES with ITA Style Captive Forks Heavy-Duty Model 110FF-ITA Extra heavy-duty - Toughest on the market. Frame constructed of ½" x 3" flat bar. Machined ITA Ffork carriage bars. Big 5,500 lb. load capacity. ITA STYLE Forks ITA Style Forks lock into position. Forks are captive and can t swing out when a load of railroad ties or other loose material is dumped off the end of the forks. Economy Model 110EC-ITA Economy ForkFrame. Clear View of forks. 3,700 lb. load capacity. Good quality for low cost. Weight 157 lbs. CONCRETE PLACEMENT BUCKETS Model (frame) Description Capacity Weight 110FF-ITA Heavy-duty - ITA Style forkframe 5,500 lbs. 232 lbs. 110EC-ITA Economy - ITA Style forkframe 3,700 lbs. 157 lbs. Model (forks) Style Fork Dimension Capacity Weight F138x4x42CL2 Pallet 1-3/8" x 4" x 42" (set of 2) 3,700 lbs. 176 lbs. F138x4x48CL2 Pallet 1-3/8" x 4" x 48" (set of 2) 3,700 lbs. 194 lbs. F15x4x48CL2 Pallet 1-1/2" x 4" x 48" (set of 2) 5,500 lbs. 214 lbs. TELESCOPING CRANE JIB REACH FARTHER AND LIFT HIGHER Place concrete in hard to reach areas for less cost. Turns a skid-steer into a mini-crane. Model 120 Model Capacity 120 1/2 cu. yd /4 cu. yd. Model 130 Telescopes 4'0" to 6'0" 1,000 lb. lift capacity SCOOP-N-MIX CONCRETE MIXER TRASH AND LOOSE MATERIAL HOPPERS Easy as 1, 2, 3: Scoop up sand and gravel. Tilt-up add water and cement, then mix. Discharge thru side gate or top opening. Model Capacity cu. ft. MIX-N-PLACE Mixer type - rotating drum. Hyd. requirements 8 to 10 gpm. Capacity - 6 cu. ft. Empty weight lbs. Model 135 Handle trash and loose material efficiently and easily. Model Capacity cu. yd cu. yd cu. yd. Model

121 Generators Measuring Wheels Pressure Washers Steam Cleaners Submersible Pumps Vacuums Air Compressors Tool Boxes Trash Pumps Ventilation Blowers Hopper Brooms Scaffolding Forklift Platforms Slings Portable Light Towers Heaters Lifts Booms Message Signs & Arrow Panels Levels Hand Tools Wheelbarrows Safety Glasses Site Management 5 127

122 GENERATORS TPG-series generators are designed to withstand the severe conditions of construction jobsites or industrial applications, especially where extra durability and dependable, stable power are required. Ideal to supply the power to Tsurumi s single-phase submersible pumps and all your electrical power tools such as drills, saws, lighting and heaters. TPG3-4500HDX Powered by an 8 hp Honda OHV engine with low level oil alert system. Automatic Idle Control. Recoil Start. Large air filter for emissions control. 4.5 gallon fuel tank. Rated load run time 8.5 hours/half-load 14.2 hours Noise level on a rated load is 68dB. TPG3-4500HDX TPG3-3000HDX Powered by a 5.5 hp Honda OHV engine with low level oil alert system. Recoil start. Large air filter for emissions control. 2.9 gallon fuel tank. Rated load run time 14.6 hours/half-load 22 hours. Noise level on a rated load is 64dB. Automatic Idle Control not available on TPG3-3000HDX. TPG3-6000HDX Powered by an 11 hp Honda OHV engine with low level oil alert system. Automatic Idle Control. Rubber Vibration Pads isolate the generator/engine set reducing vibration. A large silent muffler with spark arrestor greatly reduces noise. Easy recoil start. Large air filter for emissions control. 4.5 gallon fuel tank. Rated load run time 5.7 hours/half-load 8.5 hours. Noise level on a rated load is 72dB. TPG3-7000HDX/ HDXE Available in electric start* or recoil start. Powered by a 13 hp Honda OHV engine with low level oil alert system. Automatic Idle Control. Rubber Vibration Pads isolate the generator/engine set reducing vibration. A large silent muffler with spark arrestor greatly reduces noise. Large air filter for superior emissions control. 4.5 gallon fuel tank with fuel gauge. Rated load run time 5.3 hours/half-load 8.1 hours. TPG-11000HDXE Powered by a 18 hp Honda OHV engine with low level oil alert system. Automatic Idle Control. Rubber Vibration Pads isolate the generator/engine set reducing vibration. A large silent muffler with spark arrestor greatly reduces noise. Large air filter for superior emissions control gallon fuel tank. Noise level on a rated load is 75dB. *Battery not included. *Wheel kit is optional. Noise level on a rated load is 78dB. TPG3-6000HDX *Battery not included. *Wheel kit and lifting bail are optional. TPG3-3000HDX TPG-11000HDXE TPG3-7000HDX TPG3-7000HDXE Model Max/Rated Current Voltage Engine Model Max HP/RPM Fuel Tank Capacity Running Time Starting System Noise Level Weight lbs. TPG3-4500HDX 4500/ /240 Honda GX240U1EDT6 8.0/ Recoil 68dB 164 TPG3-3000HDX 2900/ Honda GX160U1VES6 5.5/ Recoil 64dB 110 TPG3-6000HDX 6000/ /240 Honda GX340U1EDT6 11.0/ Recoil 72dB 186 TPG3-7000HDX(E) 7000/ /240 Honda GX390U1EDT6 13.0/ Recoil/Electric 78dB 194/211 (Electric) TPG-11000HDXE 10500/ /240 Honda GX / Recoil/Electric 75dB

123 TOWABLE GENERATORS Mobile power that s Tough... Yet Quiet GENERATOR SPECIFICATIONS PowerPro 25 PowerPro 45 PowerPro 65 PowerPro 100 Generator Type Taiyo Taiyo Taiyo Taiyo Armature Connection Star with Neutral/Zig Zag Star with Neutral/Zig Zag Star with Neutral/Zig Zag Star with Neutral/Zig Zag Number of Poles 4-Pole 4-Pole 4-Pole 4-Pole Insulation Class F Class F Class F Class F Excitation Brushless with AVR Brushless with AVR Brushless with AVR Brushless with AVR Voltage Regulation 0.5% 0.5% 0.5% 0.5% Power Factor Frequency 60 HZ 60 HZ 60 HZ 60 HZ Standby Power 27.5kVA / 22kW 48.5kVA / 38.8kW 67kVA / 53.6kW 110kVA / 88kW Prime Power 25kVA / 20kW 45kVA / 36kW 63kVA / 50kW 100kVA / 80kW Voltage Single Phase 120V / 240V / 277V (Switchable) 120V / 240V / 277V (Switchable) 120V / 240V / 277V (Switchable) 120V / 240V / 277V (Switchable) Voltage Three Phase 208V / 240V / 416V / 480V (Switchable) 208V / 240V / 416V / 480V (Switchable) 208V / 240V / 416V / 480V (Switchable) 208V / 240V / 416V / 480V (Switchable) AMPERAGE Single Phase 120V / 240V 60 Amps (L1-N & L3-N) / 60 Amps 108 Amps (L1-N & L3-N) / 108 Amps 152 Amps (L1-N & L3-N) / 152 Amps 242 Amps (L1-N & L3-N) / 242 Amps Three Phase 208V / 240V / 480V 65 Amps / 60 Amps / 30 Amps 119 Amps / 108 Amps / 54 Amps 167 Amps / 152 Amps / 76 Amps 264 Amps / 242 Amps / 120 Amps ENGINE SPECIFICATIONS Engine Isuzu 4LE1, 4-cycle, water-cooled swirl chambers Isuzu 4JJ1T, 4-cycle, water-cooled direct injection turbocharged Isuzu 4JJ1X, 4-cycle, water-cooled direct injection turbocharged intercooler Isuzu 4HK1X, 4-cycle, water-cooled direct injection turbocharged intercooler Number of Cylinders EPA Emission Level Interim Tier 4 Interim Tier 4 Tier 3 Tier 3 Rated Speed (1800 rpm) 31.5 HP 57.0 HP 97.8 HP 152 HP Governor Type Mechanical Electronic Electronic Electronic Integral Fuel Tank Capacity 50 gallons 106 gallons 106 gallons 198 gallons Fluid Containment 110% 110% 110% 110% Lubricating Oil Capacity 2.1 gallon 4.0 gallon 4.0 gallon 5.4 gallon Coolant Capacity 1.6 gallon 2.7 gallon 2.9 gallon 5.7 gallon Battery 12V x1 12V System 12V x1 12V System 12V x1 12V System 12V x1 12V System FUEL CONSUMPTION Full / 75% / 50% Load 1.7 / 1.3 / 1 gal./hr. 2.6 / 2.1 / 1.5 gal./hr. 3.6 / 2.8 / 2 gal./hr. 5.9 / 4.7 / 3.2 gal./hr. Run Full Load 29.4 hrs hrs hrs hrs. WEIGHTS AND DIMENSIONS L x W x H wo/trailer 67" x 28" x 50" 82" x 39" x 61" 82" x 39" x 61" 100" x 46" x 72" Operating Weight (Wet) 1962 lbs. (890kg) 3530 lbs. (1600kg) 3660 lbs. (1660kg) 6063 lbs. (2750kg) LYNXRITE TRAILERS L x W x H**** 119" x 54" x 62" 144" x 70" x 73" 144" x 70" x 73" 196" x 79" x 85" Weight 625 lbs. (284kg) 1225 lbs. (556kg) 1225 lbs. (556kg) 1650 lbs. (748kg) Note: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. ****Height (H) is calculated from ground level to the top of the generator

124 LEVELS ALWAYS TRUST NEVER ADJUST STABILA levels represent the perfect balance of accuracy and durability, technology and craftsmanship. For over a century, quality tradesmen have trusted STABILA to be accurate 100% of the time. TYPE 96M TYPE 196 HEAVY-DUTY MAGNETIC LEVEL TYPE 96M Strongest magnets, flush mounted Work hands-free. Spring steel hairline indicators inside the vials. Certified level accuracy in top read position: 1/32" over 72". Levels 59" and longer have a bridge over the horizontal vial for uninterrupted scribing and increased frame strength. Patented, epoxy-locked vials never need adjusting. Removable rubber end caps for flush measuring in corners. Patented red pads on end caps grip walls and flat surfaces. Prevents slipping on walls. Level accuracy guaranteed for life; vials will never fog, leak or require adjustment. Readable in every direction with no change in accuracy tolerance. HEAVY-DUTY LEVEL TYPE 196 Crystal clear vials readable in any direction with no change in accuracy tolerance. Spring steel hairline indicators in vials. Best frame strength-to-weight ratio. Removable rubber end caps for scribing in corners and for reading tight header and sill openings. Rubber end caps grip walls and do not leave marks. Metal hang hole for storing level on site. Large comfortable rubber hand holes. Fast and accurate installations. Strong, wide frame. Vials are guaranteed for life. TYPE 196K TYPE 196-EM Type 106T BENT LEVELS VOID WARRANTY. PLATE LEVEL 2 TYPE 106T Strong re-enforced frame. Fully sealed solid rail (six sided) extension eliminates deflection, and delivers the smoothest extension movement available. Removable 1-5/8" standoffs reach around braces. Top plumb vial is permanently positioned at eye level. Frame side opposite the stand-offs is a level measuring surface and straight edge. Scale on both sides of extension for FAST set-ups: 8'-1", 9'-1", 10'-1", etc. Vials are guaranteed for life never to fog, leak or require adjustment. Certified accuracy in the top read position: 1/32" over 72". MASON S LEVEL TYPE 196K Light weight and strong frame. Special plumb vial locations to put the bubble in front of your eyes no matter which course you are on. Wide open plumb vials for maximum visibility. Strike Zones Blow shields are designed to be hit with a trowel. Centered hand holes (on 36" and 48" levels) for one-handed balance. Wide open horizontal vial Less bending over, better for your body. Easy to clean vials and frame smooth design for removal of mortar. Removable and replaceable rubber end caps. ELECTRONIC MAGNETIC TECH LEVEL TYPE 196-EM Strongest rare earth magnets Work hands-free. Two displays Top and side. 5 Construction languages Units of Measure: Degrees Percentage mm/m In./Ft. in decimal In./Ft. fractional Tone out Level, plumb or any angle. Easy to calibrate

125 MEASURING WHEELS MM-12 SERIES This precision molded one-foot circumference wheel is designed for measuring on a smooth, hard surface. The MM-12 features a 5-digit, push button reset counter and a retractable twist-and-lock handle. FEATURES / BENEFITS: Lightweight and compact / Fits in a briefcase; easy to carry. Wide, precision molded tire, stable grip on smooth, hard surfaces. Molded polycarbonate 5-digit counter, records to 10,000 ft. or 1,000 meters with convenient push-button reset. Safety-Green color, easy to locate at home or at the job site. Telescoping handle / compactibility. MM-12 TWIN SERIES This dual precision molded one-foot circumference wheel offers increased stability and accuracy when measuring on a smooth, hard surface. The MM-12 Twin features a 5-digit, push button reset counter and a retractable twist-and-lock handle. FEATURES / BENEFITS: Dual wheel configuration, superb traction and stable control. Wide, precision molded tires, firm, stable grip on smooth, hard surfaces. Molded polycarbonate 5-digit counter, records to 10,000 ft. or 10,000 meters with convenient push-button reset. Safety-Green color, easy to locate at home or at the job site. Brass axle bushings, free-spinning wheels for easy rolling. 3-piece telescoping handle compactibility. MM-30 SERIES A money saving workhorse is the best way to describe the MM-30. From appraising, landscaping and construction to fencing the MM-30 can easily handle the job. The MM-30 features a 5-digit, push button counter, a steel wheel, and a convenient flip up stand. FEATURES / BENEFITS: Silver powder coat steel wheel, lasting durability and good looks. Brass axle bushings, free-spinning wheel for easy rolling. Molded polycarbonate 5-digit counter, records to 10,000 ft. or 10,000 meters with convenient push-button reset. Safety-Green color, high visibility means a safer work environment. 3-foot / 1-meter circumference, best all-around versatility. Insert-and-Lock handle, transport and storage is easy with the unique, Insert-and-Lock handle. Wheel stand keeps wheel upright when not in use. ROLATAPE PROFESSIONAL SERIES 300 SERIES Standards of versatility and portability are set by the Rolatape 300 Series. Real estate, landscaping, municipal and construction measuring needs are handled with ease by the 300 Series. Professionals rely on the smooth rolling, accurate 300 Series to perform on pavement, dirt and rough surfaces. Transport and storage is easy with the unique, Insert-and-Lock handle. FEATURES / BENEFITS: All steel construction, heavy-duty strength and durability. 5-digit ratchet counter measures up to 100,000 ft., yards or meters with convenient reset knob. Calibrated wide rubber wheel, accurately measures a wide variety of terrain including paved and unpaved surfaces. Safety-Glo color, easy to find in vehicle and on job site. Insert-and-Lock handle Transport and storage is easy with the unique, Insert-and-Lock handle. Available with or without stand, keeps wheel upright when not in use. 400 Series The Rolatape 400 is a tough, all purpose measuring wheel for heavy construction, utilities, cable, telecommunications, land surveying and other critical measuring applications. The 400 is the world s #1 selling industrial measuring wheel, which features an automatic brake/ mud scraper and a stand. FEATURES / BENEFITS: All steel construction, heavy-duty strength and durability. 5-digit counter. ª Records up to 100,000 ft. or meters with convenient reset knob (Dual counters available). 4-foot circumference wheel. Easier to measure accurately on rough terrain. Wheel stand keeps wheel upright when not in use. Wheel brake. Transport to second site without losing existing measurement

126 PRESSURE WASHERS COLD WATER PRESSURE WASHERS JCW SERIES Portable Gas Driven JCW-3504-OMHB JCW-3004-OMHB These cold water pressure washers have been specifically designed for heavy-duty cleaning jobs, degreasing equipment, cleaning caked-on mud from tools and removing dried cement from forms. These durable pressure washers feature rugged components designed to keep them up and running, even under the most extreme conditions. FEATURES: Quick connect nozzles (0º, 15º, 25º and 40º). Water filter with clear sleeve for screen inspection. Professional grade insulated trigger gun with safety lock-off. Thermal relief valve psi models have a 48 inch lance and 3000 psi models have a 36 inch lance. Two-piece belt guard with 1/4-turn release for quick access to belts. Performance-proven engine with low-oil protection. Belt drive triplex piston AR pump with ceramic plungers. Adjustable pressure. Solid steel threaded axle for added strength. Dual rubber isolators. 50-foot x 3/8 inch non-marking hose with quick connects, swivel and bend restrictors. Stainless steel and brass unloader. Dual cogged belt drive system to prevent slippage. 1-1/4 inch powder coated steel tube handles. Powder coated steel base plate with welded reinforcement for reduced vibration. Convenient hose wrap. Gun/wand holder for convenient storage. Pneumatic tires with tubes for longer life. SPECIFICATIONS MODEL JCW-3504-OMHB JCW-3504-OMRB JCW-3004-OMHB Operating Pressure (PSI) Discharge Capacity (GPM) Engine Honda OHV Subaru OHV Honda OHV Displacement 389cc 404cc 389cc Dimension (LxWxH) 39.5x28.5x x28.5x x28.5x26 Shipping Weight Net Weight

127 PRESSURE WASHERS COLD WATER PRESSURE WASHERS JCW SERIES Portable Gas Driven Dual cogged belt drive system to prevent slippage JCW-3003-OMHB Water filter with clear sleeve for screen inspection Options available on Model JCW-3003: Insulated dual lance Has both a high and low pressure tip that allows you to switch to the low pressure chemical injector without having to change tips. Low pressure detergent injection Allows the user to apply the recommended detergents. High pressure detergent injection High pressure water mixes with detergent to clean even the heaviest build-up. Puncture-proof tires Tires are flat-free, maintenance free and non-marking, 13-inch, white hub, two tires. Solid steel threaded axle for added strength Two-piece belt guard with 1/4-turn release for quick access to belts Three (3) year warranty on all Honda and Subaru engines One (1) year limited parts and labor warranty Seven (7) year limited warranty on pump SPECIFICATIONS MODEL JCW-3003-OMHB JCW-3003-OMRB Operating Pressure (PSI) Discharge Capacity (GPM) Engine Honda OHV Subaru OHC Displacement 270cc 265cc Dimension (LxWxH) 39.5x28.5x x28.5x26 Shipping Weight Net Weight

128 PRESSURE WASHERS / STEAM CLEANERS Unleash the POWER and PERFORMANCE of a Shark SGP-XL Series Hot Water Pressure Washer Gasoline Powered Diesel or Fuel Oil Heated Direct Drive Pump The SGP-XL is Shark s answer to meet the demand for versatility and portability in a hot water pressure washer. Mounted on an extradurable all steel chassis and protected by a rugged steel roll cage, the SGP-XL is easy to move in all terrain with its four 13-inch tubed pneumatic tires. All four SGP-XL models feature the ever-reliable Honda (9-13 HP) engines with low-noise muffler. The SGP-XL also has a triplex, oil-bath Kächer pump with an enviable limited 7-year warranty and a cold-rolled hot water coil. Two of the models come with electric start and all deliver cleaning power between 3000 and 3500 PSI. Available with STEAM CLEANING option. BR Series Cold Water Pressure Washer Gasoline Powered Belt Drive Pump Roll Cage Design The BR is the heaviest-duty workhorse of the Shark cold water family with cleaning power of up to 5000 PSI. Six models are powered by a variety of industrial-grade engines, including Honda and Vanguard, and all feature a tri-plunger, oil-bath, belt-drive Kächer pump with an unmatched limited 7-year warranty, EZ start valve and an extra rugged roll cage made of 1¼-inch steel tubing, protected by an epoxy, powder coat finish and a limited lifetime warranty. The BR is also unique with 13-inch tubed pneumatic tires for easy maneuvering in all terrain, and variable pressure wand for convenience in altering the pressure with the twist of a handle. There is no other cold water pressure washer that offers so much in cleaning effectiveness. DG Series Cold Water Pressure Washer Gasoline Powered Direct Drive Pump Portable The DG is a gasoline-powered direct-drive, cold water pressure washer with the cleaning power of up to 3.8 GPM and 3500 PSI. Built on compact sturdy steel frames, each unit features a dependable industrial-grade Honda engine, a tri-plunger, oil-bath Kärcher pump with a limited 7-year warranty and EZ start valve for convenience in pull starting the engine. DG models have a hose-and-gun rack, high-pressure hose rated for up to 4500 PSI, detergent injector and 10-inch tubed pneumatic tires for easy maneuvering in all terrain. All DG models are ETL certified to the rigid UL-1776 pressure washer safety standards. Ideal for marinas and boats, cars and trucks, home siding, plant maintenance, decks, butters, driveways and fences. MODEL PSI GPM PUMP DRIVE PUMP ENGINE HP START BURNER BTU DIESEL TANK GAS TANK SGP Direct Kächer/Crankcase Honda 9 Recoil 12V DC 280,000 6 gal. 1.5 gal. SGP Direct Kächer/Crankcase Honda 11 Recoil 12V DC 326,000 6 gal. 1.5 gal. SGP E Direct Kächer/Crankcase Honda 11 Electric 12V DC 326,000 6 gal. 1.5 gal. SGP E Direct Kächer/Crankcase Honda 13 Electric* 12V DC 326,000 6 gal. 1.5 gal. *Only model that ships with battery MODEL PSI GPM PUMP DRIVE PUMP RPM ENGINE ENGINE HP FUEL START DIMENSIONS BR Belt Kächer/Crankcase Honda GX 13 Gas Recoil 42"L x 26"W x 30"H BR Belt Kächer/Crankcase Honda GX 13 Gas Recoil 42"L x 26"W x 30"H BR * Belt Kächer/Crankcase Vanguard 16 Gas Recoil 42"L x 26"W x 36"H BR E* Belt Kächer/Crankcase Kohler 10 Diesel Electric 42"L x 26"W x 36"H BR E* Belt Kächer/Crankcase Honda 20 Gas Electric 42"L x 26"W x 36"H BR E* Belt Kächer/Crankcase Honda 24 Gas Electric 42"L x 26"W x 36"H *Tandem-axle model Battery not included MODEL PSI GPM PUMP DRIVE PUMP PUMP RPM ENGINE ENGINE HP ENGINE RPM DIMENSIONS DG Direct Kächer/Crankcase 3400 Honda GX "Lx21"Wx24"H DG Direct Kächer/Crankcase 3400 Honda GX "Lx21"Wx24"H DG Direct Kächer/Crankcase 3400 Honda GX "Lx21"Wx24"H DG Direct Kächer/Crankcase 3400 Honda GX "Lx21"Wx24"H

129 VACUUM WET/DRY VACUUM With unique air filtration and noise level features MV-1800-OMEV EACH UNIT INCLUDES: 10-foot x 1½ inch crushproof hose. 2-piece aluminum extension wand. 14-inch commercial squeegee tool. 12-inch combination floor tool. 10¾-inch crevice tool. 5-inch upholstery tool. Cartridge filter. 1 paper filter bag (replacement bags sold in packs of ten). LIFETIME WARRANTY ON CANISTER - ONE-YEAR LIMITED WARRANTY ON VACUUM FEATURES: Electrical system is double protected. Wet and dry cartridge filter (no conversion necessary). High impact poly construction canister. Industrial grade polyolefin wheels with stainless steel shafts. Two-stage blower motor for longer life. Self-cooling motor design. Quiet operation. Exhaust air ducting reduces the possibility of motor contamination by dirt or moisture. 25-foot electrical cord. Electrical cord wrap. Drain outlet. Recessed wheels and clamps. Stackable design for easy storage. Filter efficiency 99.5% to 1.0 micron (optional HEPA filter 99.7% efficient to 0.3 micron). Eliminates airborne particles through exhaust. CSA certified. EXCLUSIVE HYDRO FLOW FILTER (# ) Designed for continuous water pick-up. Will not clog or deteriorate. Retains maximum air flow. Completely washable. Water resistant. 99.5% efficient to 1.0 micron. 1.0 micron rating prevents drywall dust from damaging motor and eliminates airborne dust. SPECIFICATIONS MODEL MV-1800-OMEV Motor 120V, Two-stage bypass HP 1.6 CFM 120 Waterlift 102 in. Capacity 18.0 gallons Water Recovery 13.0 gallons AMPS 8.3 Dimension (LxWxH) 27 x 19 x 31 Shipping Weight 55 lbs. Net Weight 44 lbs. Wet Pick-Up -1.0 Micron Dry Pick-Up +1.0 Micron

130 AIR COMPRESSORS AIR COMPRESSORS Electric/Gasoline - Single Stage AM1-PE15-08M AM1-PH65-08M AM1-PE15-08M ELECTRIC AIR COMPRESSOR FEATURES: 14-gauge powder coated two-piece belt guard with 1/4-turn release for quick access to belts. Industrial UL listed electric motor. Auto start/stop (continuous run optional). Industrial grade pressure switch. Thermal overload motor protection. Quality cast iron single stage compressor. Stainless steel braided discharge hose. Belt tightening system pulls engine straight to ensure constant belt alignment. Regulator and two gauges for tank and outlet pressure. AM1-PH65-08M GASOLINE AIR COMPRESSOR ADDITIONAL FEATURES: Splash lubricated cast iron crankcase. Aluminum head for heat dissipation. Large canister intake filter. Fly wheel for extra cooling and longer life. (12 inch on Honda models and 10 inch on electric models) Powder coated 8-gallon twin tank receivers. Convenient lifting handles. 7-gauge base plate to reduce vibration. Pneumatic tire with tube and steel hub. Manual drain valves for proper maintenance. SPECIFICATIONS FEATURES: Quality cast iron single stage compressor. Stainless steel braided discharge hose. Belt tightening system pulls engine straight to ensure constant belt alignment. Regulator and two gauges for tank and outlet pressure. Quality pilot valve unloader. Pneumatic idle control to conserve fuel. 14-gauge powder coated two-piece belt guard with 1/4-turn release for quick access to belts. Industrial OHV Honda engine. MODEL AM1-PE15-08M AM1-PH65-08M Motor 120V, 13.2A Electric - Engine - Honda OHV HP/Displacement 1.5 hp 196cc 100 PSI Plug Type Nema 5-15P - Pump Cast iron Cast iron Dimension (LxWxH) 44.5 x 18.5 x x 18.5 x 26 Shipping Weight Net Weight

131 JOBSITE BOXES JOBSITE BOXES PROVIDE SUPERIOR PROTECTION FOR TOOLS AND WORK GEAR MB-4830 FEATURES: Special tamper-proof armored locking system for protection against break-ins. Reinforced support skids for increased protection and easy transporting. Convenient, swing out handles for additional mobility. Special locking lid support locks the lid open to prevent accidental closings. Heavy-duty solid steel construction with full arc welded seams. Special powder coated finish for extreme durability. Full-length concealed hinges are riveted for additional protection and strength. Predrilled skids for easy caster installation. Optional removable tool trays to assist tool management. ACCESSORIES : Casters: MX-4 (4-inch) MX-5 (5-inch) MX-6 (6-inch) Tool Trays: MX-19 fits MB-3619 MX-30 fits MB-4830 MB-3619 SPECIFICATIONS MODEL MB-3619 MB-4830 Cubic feet Dim. (L x W x H) 36 x 19 x x 30 x 30 Shipping Weight 83 lbs 174 lbs Net Weight 81 lbs 168 lbs

132 ELECTRIC SUBMERSIBLE PUMPS LB GENERAL DEWATERING PUMPS Compact and Powerful Powerful pumps built with durable materials in an easy handling design. Top discharge provides maximum motor cooling efficiency allowing continuous duty operation at low water levels and extended dry-run capability. LB-480 Features Synthetic rubber wear parts and semivortex impeller for maximum durability. V-ring system protects the shaft seal from abrasives. Easy disassembly with one 12mm box/socket wrench. Vertical or horizontal discharge. Patented oil lifter extends shaft seal life up to 10 times. Optional Accessories TS-301 Float Switch for automatic operation. LB-800 Features Designed to fit an 8" pipe. Up to 60' shut off head. Lightweight, compact design. Available in 220V single-phase for lower amperage draw and longer cable extensions. Optional Accessories Float switch for automatic operation TS-302 for 110V, TS-303 for 220V. 3-inch NPT coupling available Model LB-480A automatic submersible pump handles like the non-automatic version in every aspect of construction site usage requiring a tough and durable pump. LB-480A Features No control panel or float switches required. Handles like the non-automatic pump - no special installation procedures. Requires very small space to operate - only 8-3/4" diameter. Urethane, Semi Vortex Impeller and Wear Plates for maximum durability and maintaining pump performance. Double Inside Mechanical Seal with SiC faces provides the longest operational life. Oil Lifter provides lubrication of the seal faces. (Patent Pending) V-Ring Seal Protector protects mechanical seal from abrasive particles. Technical Features of EL-1 Relay Unit Sensitive electrodes detect water to start pump operation even when foreign materials are present. Internal timer eliminates chattering operation in rough water to extend motor life. Relay sensor completely molded in resin and covered by rubber case for protection against rough handling. Jobsite tested for more than 30,000 on-off cycles without failure or damage. HS SAND/SOLIDS TRASH PUMP Pump sand, solids and debris with minimal wear, clogging. NK HEAVY-DUTY, HIGH HEAD PUMP Capable of handling abrasive materials with minimal wear. HS2.4S-62 Features Built-in shaft mounted agitator suspends solids. Urethane Semi Vortex Impeller for maximum durability and maintaining pump performance. Double inside mechanical seal with SiC faces provides the longest operational life. Oil Lifter provides lubrication of the seal faces. (Patent Pending) V-Ring Seal Protector protects mechanical seal from abrasive particles. Optional Accessories TS-301 Float Switch for automatic operation. Vertical Discharge Coupling. Residue Kit for 0.4 inch pump down. NK2-15 Features Terminal board for voltage reconnect (NK2-15 only). Semi Vortex Impeller and Synthetic Rubber Wear Plates for maximum durability and maintaining pump performance. Double Inside Mechanical Seal with SiC faces provides the longest operational life. Oil Lifter provides lubrication of the seal faces. (Patent Pending) V-Ring Seal protector protects mechanical seal from abrasive particles. Optional Accessories TS-303 Float Switch for automatic operation (220V only). Sand kit to suspend solids and prevent clogging. 2-inch NPT coupling available

133 ELECTRIC SUBMERSIBLE PUMPS ELECTRIC SUBMERSIBLE SPECIFICATIONS HS2.4S-62 LB-480 LB-480A LB-800 NK2-15 Sand/Solids Dewatering Automatic Operation SlimLine Pump Heavy-duty & High Head FLUID Trash Pump Max. Capacity (GPM) Max. Head (ft.) Solids Dia. (in.) 3/8 1/4 1/4 1/4 1/3 PUMP Impeller Type Semi-Vortex Semi-Vortex Semi-Vortex Semi-Vortex Semi-Vortex Impeller Material Urethane Rubber Urethane Rubber Urethane Rubber Urethane Rubber Ductile Iron Casting Casting Material Grey Iron Ethylene Propylene Ethylene Propylene Natural Rubber Ethylene Propylene Casting Rubber Rubber Rubber Wear Plate Material (Integral part Urethane Urethane Natural Rubber (Integral part of casing) Rubber Rubber of casing) Shaft Seal - Type / Material Double inside mechanical seal with Silicon Carbide on Silicon Carbide faces Silicon Carbide on Silicon on lower seals and Carbon on Ceramic faces on upper seals. Carbide faces on upper and lower seals. Seal Lubricant - Type SAE 10W/20W or Turbine Oil (ISO VG32) Seal Lubricant - Amount, oz Seal Protection V-Ring & Oil Lifter V-Ring & Oil Lifter V-Ring & Oil Lifter Lip Seal V-Ring & Oil Lifter Discharge Connection 2" NPT Coupling 2" NPT Coupling 2" NPT Coupling 2" NPT Coupling 3" NPT Coupling MOTOR Motor Output (hp) 1/2 hp 2/3 hp 2/3 hp 1 hp 2 hp Phase Single Phase Single Phase Single Phase Single Phase Single Phase Voltage 110V 110V 110V 110V or 220V 110V or 220V Amperage - Rated Current V V V V Amperage - Starting Current V V V V Type Continuous duty, Air filled, 3600 RPM, 60 Hz Bearings Double shielded, Permanently lubricated, High-temp C3 with Double shielded, B-10 life of 60,000 hours. Permanently lubricated Insulation Class B E E E B Motor Protector (Built-in) Miniature Protector Miniature Protector Miniature Protector Circle Thermal Circle Thermal Protector Protector Plug Configuration (Nema) 5-15P 5-15P 5-15P 5-15P (110V) No Plug No Plug (220V) Cable - Conductors x AWG 3C x 16 AWG 3C x 16 AWG 3C x 16 AWG 3C x 14 AWG 3C x 12 AWG Std. Cable Length 20 feet 32 feet 32 feet 50 feet 32 feet Max. Cable Length 70 feet 62 feet 62 feet 53 ft V 46 ft V 187 ft V 185 ft V Min. Generator Cap. (Watts) Optional Float Switch TS-301 TS-301 n/a TS-302 (110V) TS-303 (220V TS-303 (220V) operation only) DIMENSION Max. Diameter (in.) 10-1/16 7-3/8 8-3/4 7-1/2 9-7/16 Max. Height (in.) 12-15/ / / / /2 Continuous Running Water Level (in.) 3-1/ /2 3-1/8 3-1/4 Pump Weight (lbs.) Shipping Weight (lbs.)

134 TRASH PUMPS EPT HEAVY-DUTY TRAILER MOUNTED Trailer Mounted Trash Pumps for Tough Jobs Dewatering to sewage, clean water to 3-inch solids our trash pumps do it all. EPT2-100DD and EPT2-150DD Features Heavy-duty Deutz diesel engine with electric start and 40 U.S. gallon fuel tank provides a minimum of 24 hours run time per tank. Pass 3" solids (EPT2-150DD) or 2" solids (EPT2-100DD) with non-clog, wear resistant ductile iron impeller on 304 stainless steel shaft sleeve. Oil and abrasion resistant, rubber-lined front and rear wear plates. Long-life grease lubricated tungsten carbide mechanical seals (optional oil lubricated seals available). Heavy-duty DOT road trailer with 15" 6-ply tires and 2" ball hitch (optional pintle hitch available). EPT2-100DD EPT2-150DD EPT3-150YD 4" Heavy-duty Trash Pump 6" Heavy-duty Trash Pump 6" Heavy-duty Trash Pump FLUID Max. Capacity (GPM) Max. Capacity (GPH) Max. Head (ft.) Max. Solids Diameter (in.) PUMP Impeller Type Semi-Open Semi-Open Semi-Open Impeller (Diaphragm) Material Ductile Iron Ductile Iron Ductile Iron Volute Casting Material Cast Iron Cast Iron Cast Iron Wear Plate Material Rubber Lined Cast Iron Rubber Lined Cast Iron (Integral part of volute) Pump Casting Material Cast Iron Cast Iron Cast Iron Shaft Seal Tungsten Carbide Mechanical Seal Tungsten Carbide Mechanical Seal Carbon/Chrome Mechanical Seal Seal Lubricant Grease (Oil optional) Grease (Oil optional) Grease Discharge Connection 4" NPT Coupling 6" NPT Coupling 6" NPT Coupling Suction Connection 4" NPT Coupling 6" NPT Coupling 6" NPT Coupling ENGINE Brand DEUTZ DEUTZ YANMAR Model F2L1011 F3L1011 3TNV88 Type Air/Oil Cooled, 4-Cycle, Two Cylinder Air/Oil Cooled, 4-Cycle, Three Cylinder Air/Oil Cooled, 4-Cycle, Three Cylinder with Temperature/Oil Sensor with Temperature/Oil Sensor with Temperature/Oil Sensor Output (hp) 24.5 hp 36 hp 30 hp RPM Fuel Diesel Diesel Diesel Fuel Tank Capacity (US Gal.) Continuous Run Time Per Tank (Hr.) Starting Method Electric, 12V Electric, 12V Electric, 12V DIMENSION Shipping Dimensions Length (in.) Width (in.) 63-1/2 63-1/2 60 Height (in.) Shipping Weight (lbs.)

135 EQUIPMENT COMPANY manufacturers of light construction equipment VENTILATION BLOWER General NONHAZARDOUS LOCATION AIR VENTILATION BLOWERS General s line of portable air blowers can accommodate most nonhazardous confined space ventilation requirements. Select from 8" or 12" diameter units with power choices of 12VDC or 115 VAC. Both radial and axial housing configurations are available for the most demanding air flow applications. Blowers are ideal for supplying fresh air around construction sites; removing toxic and noxious atmospheres from confined work spaces; detecting sewer line leaks and providing fresh air when working in tanks and vaults. Proper ventilation increases safety and worker productivity rates while conforming to tough federal and state OSHA regulations. Each unit is designed to General s highest quality standards for uncompromised utility and investment return. There are no plastic parts to crack. Constructed with heavy-gauge aluminum and steel, all General blowers offer laboratory certified air flow rates from independent, third party, agency testing. Breathe easier with a General blower on the jobsite...cost effective solutions to confined space ventilation. EP8 Specifications MODEL EP8 EP8DC EP8DC15 EP8DC25 EP8AC EP8AC15 EP8AC25 EP12AC BLOW-R-PAC BLOW-R-PAC BLOW-R-PAC BLOW-R-PAC POWER 1/3 HP(.23kw) 1/6 HP (.13 kw) 1/6 HP (.13 kw) 1/6 HP (.13 kw) 1/4 HP (.20 kw) 1/4 HP (.20 kw) 1/4 HP (.20 kw) 3/4 HP (.52kw) SOURCE 1725 RPM, 60 Hz 3450 RPM, 12 volts 3450 RPM, 12 volts 3450 RPM, 12volts 3200RPM, 60 Hz 3200 RPM, 60Hz 3200 RPM, 60HZ 3450 RPM,60 Hz 115 volts AC, capacitor 13 amperes, sleeve 13 amperes, sleeve 13 amperes, sleeve 115/230 volts, AC 115 volts AC, capacitor 115 volts AC, capacitor 115/230 volts AC, capacitor start, 4.2 amperes, full bearing and thermal bearing and thermal bearing and thermal capacitor start, 2.5 start, 2.4 amperes full start, 25 amperes full start, 8.8/4.4 amperes full load, ball bearing and protection equipped protection equipped protection equipped amperes full load, ball load, ball bearing and load, ball bearing and load, ball bearing and thermal thermal protection bearing and thermal thermal protection thermal protection protection equipped. Motor is equipped protection equipped equipped equipped factory wired for 115 volts SPEED CONTROL Single speed Single speed Single speed Single speed Single speed Single speed Single speed Single speed BLOWER Type Radial Axial Axial Axial Axial Axial Axial Axial Material Cast aluminum Spun steel Spun steel Spun steel Formed steel Spun steel Spun steel Formed steel Wheel Type Steel multivane Aluminum/plastic Aluminum/plastic Aluminum/plastic Aluminum/plastic Aluminum/plastic Aluminum/plastic Aluminum/plastic MultiWing axial MultiWing axial MultiWing axial MultiWing axial MultiWing axial MultiWing axial MultiWing axial Size 8" (203mm) nominal 8" (203mm) nominal 8" (203mm) diameter 8" (203mm) diameter 8" (203mm) nominal 8" (203mm) diameter 8" (203mm) diameter 12" (305mm) nominal diameter inlet/outlet diameter outlet x 15' (4.5m) integral x 25' (7.6m) integral diameter inlet/outlet x 15' (4.5m) integral x 25' (7.6m) integral diameter inlet/outlet duct duct duct duct GENERAL Mounting Rubber Rubber Rubber Rubber Direct Rubber Rubber Rubber Type Anti-vibration Anti-vibration Anti-vibration Anti-vibration Steel base Anti-vibration Anti-vibration Anti-vibration Weight 53 lbs. (24kg) 26 lbs. (19kg) 47 lbs. (32kg) 57 lbs. (26kg) 23 lbs.(10.6kg) 43 lbs. (20kg) 53 lbs. (24kg) 65 lbs. (29.5kg) DIMENSIONS Height 19-3/4" (502mm) 13-1/2" (343mm) 13-1/2" (343mm) 13-1/2" (343mm) 11-1/2" (292mm) 13-1/2" (343mm) 13-1/2" (343mm) 15-1/2" (394mm) Length 18-1/4" (464mm) 15-1/4" (387mm) 30-1/2" (775mm) 42-1/2" (1080mm) 18" (457mm) 30-1/2" (775mm) 42-1/2" (1080mm) 18-1/2" (470mm) Width 14-1/2" (368mm) 11-3/4" (298mm) 11-3/4" (298mm) 11-3/4" (298mm) 8-1/8" (206mm) 11-3/4" (298mm) 11-3/4" (298mm) 12-5/8" (321mm) EP8 15 good reasons why your next electrically powered air ventilation blower should be a GENERAL Model EP8: 11-gauge steel frame to better resist abuse and damage. Watertight power cord strain relief fitting. Rigged and durable. Flow thru ventilation. Helps motor run cooler and longer. 1/3 HP electric motor with 1.5 service factor. Runs cooler. Capacitor start electric motor required less amperage. Operates from a smaller generator. Fuse protection guard, Helps prevent damage during transport. Balanced carry handle. Comfortable and functional. Permanently affixed aluminum data plates. More durable than a decal. Durable inlet and exhaust screens meet CSA and OSHA requirements. All flow rates tested and certified by an independent testing laboratory. Cast aluminum blower housing. More durable than sheet metal. No seams or spotwelds to break. All metal squirrel cage type blower wheel. No warping or cracking with use. ON/OFF switch guard. Helps prevent damage during transport AWG power cord material meets the more stringent CSA certification requirements. Designed and manufactured to the more stringent Canadian StandardsAssociation (CSA) certification requirements

136 LIGHT CONSTRUCTION EQUIPMENT Pick-Up Sweeper Vacuum Attachment Factory-installed hydraulically powered vacuum attachment for Sweepster Collector Sweeping Models. Collects and filters out airborne particulate during sweeping operation for virtual dust-free sweeping without the need for water sprinkler systems. Features: Dust control without messy, bulky, impractical water sprinkler systems to continually refill. Washable teflon-coated filter works in dry or wet conditions. Virtually eliminates airborne particulate ejection (above 10 micron) during the sweeper operation. Electrically operated operator-controlled vibration device cleans the filter between washings. Can be ordered as a factory-installed option on any of the Sweepster Collector sweepers. Multiple valve packages available to match attachment to Sweepster Collector sweeper models and carrier specifications. Can be used in conjunction with Gutter Broom option as well. Powder-coated all steel body for protection and durability. 59"L x 27"W x 13"H. Weight: 175 lbs. SB Hopper Broom The SB Hopper Broom is an excellent choice for heavy-duty clean-up. It easily picks up asphalt milling spoils, gravel, construction debris and other heavy materials, moving the debris into the larger hopper for disposal. To pick up dirt and lighter material, simply reverse the broom and the lighter material is collected in the hopper. Applications: Handles light and heavy-duty clean-up in construction, industrial and municipal applications. Optional sprinkler kit with or without 25-gallon tank. Fits skid-steers, backhoe-loaders, wheel loaders and utility loaders. Features: Bi-directional broom sweeps forward to pick up dirt reverses to collect asphalt millings, rock and construction debris. To dump, just lift and tilt no chains. Direct-drive brush motors eliminate chains and sprockets. No front caster wheel works easily next to walls, curbs and obstacles. Replaceable bolt-on cutting edge on bucket. Available in three widths: 60", 72" and 84"

137 SCAFFOLDS Pro-Jax Utility Scaffold Packages 0127-(006*)-0 Single Unit 0127-(006*)-1 Single Unit w/guard Railing (06*) 6' Complete Guard Rail Pkg. (2 pieces) HINGED PLATFORMS FOR INSIDE ACCESS AVAILABLE. PACKAGES ARE AVAILABLE WITH EXPANDED METAL DECKS. 18' 23' 6" 20' 6" 15' 17' w/ G.R. 12' 6" Maximum Working Height 10' 6" 9' 6" 11' 6" w/ G.R. Overall Height Maximum Platform Height** Minimum Platform Height 6' 4' w/o G.R. 2' Single Unit w/o Guard Railing 6' w/ G.R. Single Unit w/ Guard Railing 2 Single Units w/ Guard Railing & Narrow Outriggers 2 Single Units, 1-65" Add. Ht. Unit w/guard Railing & Wide Outriggers NOTE: Guard railing is required by OSHA on all platforms 10' or higher. When platform height exceeds 4', guard railing is recommended but not required. PRO-JAX STEEL PACKAGES Part No. Length Platform Ht.Range Max.Wk.Ht. Overall Ht. Gd. Rail Outrig. Wt.# GUARD RAIL & OUTRIGGER PACKAGES Part No. Description Set Wt.# ' 2'4" 10'6" 6' No No ' 2'6" 12'6" 9'6" Yes No 240 Includes frames, braces, platform and casters. Outriggers and guard rails included where applicable ' Complete Guard Rail Pkg. (2 pcs.) Narrow Outrigger Package (4 pcs.)

138 SCAFFOLD / ACCESSORIES Step Type Must Specify Tube & Lock Frame Tube Size: /16" _-0243_ 4' W x 3' H 22# _-0253_ 5' W x 3' H 24# Steel Toeboard Brackets End Bracket End and Side Hanger Tube End Guard Rail Systems Guard Rail Posts Only use hole end guard rails. Type UC Post Side Bracket Angle Iron Hanger Tube End _2 w/snap PIn Casters _2 w/snap PIn Available in three stem sizes to fit the three tube sizes offered. All Caster include " snap pin for fastening caster to frame leg. Available in capacities from pounds. All bil-jax casters include wheel and swivel bakes. _-0244_ 4' W x 4' H 29.5# _-0254_ 5' W x 4' H 33# Diagonal Braces 0010 Hole End Use with all other bil-jax Lock Types Diagonal Braces Part No. Description Frame Spacing Wt. lb ST-72-7H-24 24" lock spacing 7' Sp ST-72-7H-36 36" lock spacing 7' Sp ST-72-7H-48 48" lock spacing 7' Sp. 12 Hoist Arm / Well Wheell _-0245_ 4' W x 5' H 35# _-0255_ 5' W x 5' H 39# Hoist Arm / Well Wheel Part No. Description Capacity Wt. lb ST-65-HS Swivel Head Hoist Arm 100* WP-65-W-10 10" Well Wheel 200* 13.5 *Rated to lift 100 lb. load using well wheel and rope. Swivel 10" Leveling Jacks Made from cold rolled steel with plated roll formed threads for durability and long life. Plated finish. Well Wheel _-0246_ 4' W x 6' H 42# *7-0247_ 5' W x 6' 4" H 44# _-0248_ 4' W x 6' 6" H 43# _-0256_ 5' W x 6' H 45# *7-0257_ 5' W x 6' 4" H 54# _-0258_ 5' W x 6' 6" H 47# Hoist Arm *NOTE: When ordering 6'6" H frames with 1-11/16" tube size (7), height of frame is 6' 4" (listed separately above). Rigid _ Swivel _ Extension with retainer _

139 WORK PLATFORMS WORK PLATFORMS FOR USE WITH STEEL SCAFFOLDS 5300 SERIES PLYWOOD DECKED ALUMA PLANK Model Specifications: Duty Rating Side Rail Side Rail Model No. /Sq. Ft. Width Length Depth Weight lbs. 19-1/16" 7' 3-1/2" 27 lbs. Task-Master Aluminum Stages On 5" or 6" depth stages, a double row of rungs give extra rigidity and less deflection. Allows 30' spans with no trusses. Individual slip-resistant decking minimizes paint or material build-up. Double end rung feature on stages with 6" rails. Side Rail Side Rail Shipping Model No. Length Width Depth Flange Weight 1-man 250 lbs. rated: ' 12" 4" 1-3/8" ' 12" 4" 1-3/8" ' 12" 5" 1-3/8" ' 12" 5" 1-3/8" man 500 lbs. rated: ' 12" 6" 1-3/8" ' 14" 4" 1-3/8" ' 14" 5" 1-3/8" ' 14" 6" 1-3/8" ' 14" 6" 2" ' 24" 4" 1-3/8" ' 24" 5" 1-3/8" ' 24" 6" 1-3/8" ' 24" 6" 1-3/8" ' 24" 6" 2"

140 FORKLIFT WORK PLATFORM ELEVATE PERSONNEL Safety Work Platform Designed for rough terrain forklifts provide an economical and safe way to elevate personnel on all types of construction. These platforms safely elevate personnel for maintenance work, painting, inventory, and lots more jobs around the warehouse or in the plant. Slip on the Forks style UNIVERSAL FIT SLIP ON THE FORKS MODELS Model Size Shipping Weight 1204B 4 ft. x 4 ft. 310 lbs. 1206B 4 ft. x 6 ft. 380 lbs. 1208B 4 ft. x 8 ft. 425 lbs. 1210B 4 ft. x 9 ft. 8 in. 505 lbs. QUICK-TACH MODELS Model Length Shipping Weight 1204BQT 4 ft. x 4 ft. ±460 lbs. 1206BQT 4 ft. x 6 ft. ±530 lbs. 1208BQT 4 ft. x 8 ft. ±575 lbs. 1210BQT 4 ft. x 9 ft. 8 in. ±635 lbs. Specifications: Full Perimeter Guard Rail System constructed of 1-1/2" square steel tubing and consisting of a 42" high top rail, a mid rail and 5-1/2" high intregel toeboards. Access gates with spring pin latches are provided at each end. Entire Guard Rail System can be easily removed and laid flat inside platform for transportation. Deck consists of a strong but lightweight engineered steel frame with expanded metal deck. The Universal Fit Slip on the Forks design can be used with both Extendible Reach and Straight Mast forklifts. Forks slide into steel fork pockets and are secured with two heavy-duty steel pins behind the heel of the forks. They are designed for use with a 48" or wider carriage and 48" long forks up to 7" wide and 2-3/4" thick. Forks longer than 48" can be used, however, they will extend out past the front of the platform. The Quick-Tach models are built to fit specific makes and models of forklifts that are equipped with a Quick- Tach. The forks and carriage are removed and the platform attaches to the boom. All Models are rated at 1,000 lbs. load capacity. Rating applies to platform only and does not reflect capacity of forklift. OPTIONAL MAST PROTECTION SCREEN (Model 1250) protects personnel from moving parts of forklift mast. Constructed of square steel tubing and expanded metal, the screen measures 42" wide x 84" tall. It attaches to the back guardrail with u-bolts. A mast protection screen should be used with all straight mast forklifts and with any others where a mast poses a safety hazard. INDUSTRIAL WORK PLATFORM Heavy-duty construction - 1,000 lbs. capacity Secures to forks with simple Positive Pin Locking System Front mid rail raises for entrance - no gate to be left open Built-in 84" high Mast Protection Screen (upper half removable for transportation and storage) Integral full perimeter toeboard Model 1203B 3' x 3' Model 1244B 4' x 4'

141 SLINGS Types 1 and 2 Type 1 - Sling made with a triangle fitting on one end and a slotted triangle choker fitting on the other end. It can be used in a vertical, basket or choker hitch. Rated Capacities in Lbs. Type 1 Type 2** Vertical Choker Basket (TC) (TT) TC1-802 TT ,200 2,500 6,400 TC1-803 TT ,800 3,800 9,600 TC1-804 TT ,400 5,000 12,800 TC1-805 TT ,000 6,400 6,000 TC1-806 TT ,600 7,700 19,200 TC1-808 TT ,800 10,200 25,600 TC1-810 TT ,000 12,800 32,000 TC1-812 TT ,200 15,400 38,400 TC1-816 TT ,500 20,400 51,000 TC1-818 TT ,700 23,000 57,400 TC1-820 TT ,000 25,600 64,000 TC1-824 TT ,400 30,700 76,800 TC2-802 TT ,400 5,000 12,800 TC2-803 TT ,600 6,900 17,200 TC2-804 TT ,500 9,200 23,000 TC2-805 TT ,000 11,200 28,000 TC2-806 TT ,800 13,400 33,600 TC2-808 TT ,400 17,900 44,800 TC2-810 TT ,000 22,400 56,000 TC2-812 TT ,600 26,800 67,200 TC2-816 TT ,800 35,800 89,600 TC2-818 TT ,400 40, ,800 TC2-820 TT ,000 44, ,000 TC2-824 TT ,200 53, ,400 **TYPE 2 - Sling made with a triangle fitting on both ends. It can be used in a vertical or basket hitch only. This sling cannot be used in a choker hitch. CAUTION DO NOT EXCEED RATED CAPACITIES. TYPES 3 and 4 TYPE 3 - Sling made with a flat loop eye on each end with loop eye opening on same plane as sling body. This type of sling is sometimes called a flat eye and eye, eye and eye, double eye sling. Twisted Flat Eye Rated Capacities in Lbs. Eye Type 3 Type 4 Vertical Choker Basket (EE) (EE) EE ,600 1,250 3,200 EE ,200 2,500 6,400 EE ,800 3,800 9,600 EE ,400 5,000 12,800 EE ,000 6,400 16,000 EE ,600 7,700 19,200 EE ,800 10,200 25,600 EE ,000 12,800 32,000 EE ,200 15,400 38,400 EE ,200 2,500 6,400 EE ,400 5,000 12,800 EE ,600 6,900 17,200 EE ,500 9,200 23,000 EE ,600 10,900 27,200 EE ,300 13,000 32,600 EE ,200 15,400 38,400 EE ,400 17,900 44,800 EE ,900 21,500 53,800 EE ,100 3,300 8,200 EE ,300 6,600 16,600 EE ,500 10,000 25,000 EE ,000 12,800 32,000 EE ,200 15,400 38,400 EE ,000 18,400 46,000 EE ,700 24,500 61,400 EE ,800 29,400 73,600 EE ,000 35,200 88,000 EE ,000 4,000 10,000 EE ,000 8,000 20,000 EE ,900 11,900 29,800 EE ,800 15,800 39,600 EE ,800 19,800 49,600 EE ,800 23,800 59,600 EE ,700 31,700 79,400 EE ,600 39,600 99,200 EE ,500 47, ,000 **TYPE 4 - Sling made with both loop eyes formed as in Type III, except that the loop eyes are turned to form a loop eye which is at a right angle to the plane of the sling body. This type of sling is commonly referred to as a twisted eye sling. CAUTION DO NOT EXCEED RATED CAPACITIES. TYPES 5 Type 5 - Endless sling, sometimes referred to as a grommet. It is a continuous loop formed by joining the ends of the fabric together with a splice. Rated Capacities in Lbs. Type 5 Vertical Choker Basket (EN) EN ,200 2,500 6,400 EN ,400 5,000 12,800 EN ,600 6,900 17,200 EN ,500 9,200 23,000 EN ,600 10,900 27,200 EN ,300 13,000 32,600 EN ,200 15,400 38,400 EN ,400 17,900 44,800 EN ,900 21,500 53,800 EN ,200 4,900 12,400 EN ,200 9,800 24,400 EN ,300 13,000 32,600 EN ,700 16,500 41,400 EN ,500 19,600 49,000 EN ,600 23,000 57,200 EN ,700 24,500 61,400 EN ,600 26,800 67,200 EN ,600 30,000 75,200 EN ,000 6,400 16,000 EN ,000 12,800 32,000 EN ,500 17,200 43,000 EN ,700 23,000 57,400 EN ,000 27,200 68,000 EN ,700 32,500 81,400 EN ,00 36,800 92,000 EN ,500 41, ,000 EN ,200 47, ,400 EN ,000 8,000 20,000 EN ,800 15,800 39,600 EN ,700 21,300 53,400 EN ,600 28,400 71,200 EN ,200 33,700 84,400 EN ,500 40, ,000 EN ,600 46, ,200 EN ,200 53, ,400 EN ,700 64, ,400 CAUTION DO NOT EXCEED RATED CAPACITIES

142 SLINGS TYPE 6 Type 6 - Return eye (reversed eye) sling is formed by using multiple widths of webbing held edge to edge. A wear pad is attached on both sides of the sling body and on both sides of the loop eyes to form a loop eye at each end which is at a right angle to the plane of the sling body. Attached Eye Wide-Lift Code No. Vertical Choker Basket Sling Width RE ,200 2,500 6,400 2 RE ,400 5,000 12,800 4 RE ,600 6,900 17,200 6 RE ,200 4,900 12,400 2 RE ,200 9,800 24,400 4 RE ,300 13,000 32,600 6 RE ,000 12,800 32,000 4 RE ,500 17,200 43,000 6 RE ,700 21,200 53,400 6 Available in other widths. CAUTION DO NOT EXCEED RATED CAPACITIES Body Code Vertical Basket Eye Eye Width Number Hitch Cap. in Lbs. Length Width 6" WLA ,000 10" 1" 6" WLA ,000 10" 1" 8" WLA ,000 10" 1" 8" WLA ,000 10" 1" 10" WLA ,000 12" 1" 10" WLA ,000 12" 1" 12" WLA ,000 12" 1" 12" WLA ,000 12" 1" 16" WLA ,000 12" 2" 16" WLA ,000 12" 2" 20" WLA ,000 18" 2" 20" WLA ,000 18" 2" 24" WLA ,000 18" 2" 24" WLA ,000 18" 2" CAUTION DO NOT EXCEED RATED CAPACITIES SLINGS OR ASSEMBLIES ARE NOT TO BE USED FOR TRANSPORTING PERSONNEL Stone Handling Slings are made of woven nylon web reinforced with special abrasion-resistant facing yarns. This rugged material is designed expressly for lifting stone, concrete and building panels. Outstanding properties: Facing made of abrasive resistant material. Nylon-backed for strength Natural untreated web for softness and no color rub-off. Standard eye size is 12" Note: Stone handling slings available in 4" width only. Specifications - - Rated Capacities in Lbs. Type Code No. Vertical Choker Basket 1 SHTC ,400 4,000 10,800 1 SHTC ,400 7,000 18,800 2 SHTT ,400-10,800 2 SHTT ,400-18, SHEE ,400 4,000 10, SHEE ,400 7,000 18,800 5 SHEN ,000 6,000 16,000 5 *SHEN ,000 6,000 16,000 *Note: 2-ply Endless slings (SHEN2-704) have no lap. The ends are butted for free rolling over spreader. Capacities are the same as 1 ply, but both sides are faced with abrasive-resistant materials to give double use. Continuous Eye Wide-Lift Body Code Vertical Basket Eye Eye Width Number Hitch Cap. in Lbs. Length 6" WL ,400 9" 1-1/2" 6" WL ,600 9" 1-1/2" 8" WL ,400 12" 2" 8" WL ,000 12" 2" 10" WL ,600 15" 2-1/2" 10" WL ,600 15" 2-1/2" 12" WL ,800 18" 3" 12" WL ,200 18" 3" 16" WL ,000 24" 4" 16" WL ,500 24" 4" 20" WL ,000 30" 5" 20" WL ,000 30" 5" 24" WL ,000 36" 6" 24" WL ,000 36" 6" Note: Normal eye length is 1 1/2 times body width. CAUTION DO NOT EXCEED RATED CAPACITIES SLINGS OR ASSEMBLIES ARE NOT TO BE USED FOR TRANSPORTING PERSONNEL CAUTION DO NOT EXCEED RATED CAPACITIES SLINGS OR ASSEMBLIES ARE NOT TO BE USED FOR TRANSPORTING PERSONNEL

143 PORTABLE LIGHT TOWER The Night-Lite PRO features Allmand s SHO-HD lighting system as standard equipment. Featuring 1,250-watt lamps and ballasts, it produces 150,000 lumens per lamps, a 36% increase over the industry standard of 1,000-watt lamps. NIGHT-LITE PRO SPECIFICATIONS Dimensions Height mast lowered ft.1 in.(1.9m) Height mast raised ft. (9.1m) Length with fixtures ft.6 in. (4.0m) Width ft.1.5 in. (1.3m) Outrigger width ft.9.5 in. (2.4m) Wheels and tires in. (33cm) Lighting Lamps...Four (4) 1250 watt metal halide fixtures watt lighting system Engine - (Standard) Model Kohler KDW 1003, 1,800 rpm liquid cooled diesel with 12-volt electric start Displacement cu. in. (898cc) Alternator amp, 12-volt Power output hp continuous Fuel Diesel Fuel consumption gal./hr. (1.70 L/hr) Fuel capacity gallon (114 L) Oil sump capacity U.S.qt. (5.1 L) Low oil pressure, high temperature automatic shutoff, glow plug cold start system. Electrical Alternator kw alternator, 60 Hz, 1 phase Circuits Hard-wired electrical Ballast.Easily serviceable, componentized assy. Ground rod standard 120 volt convenience outlets standard Tower Assembly ft. hvy.-duty three section tower Guide pads.....self-lubricating nylon wear pads Rotation º rotatable from the ground Trailer Frame Formed, welded steel Enclosure Heavy-duty with 10-gauge side panels, 12-gauge hood and lockable lift-up doors Fenders.Dent and rust resistant rotational molded Hitch Adjustable height, 2 in. ball coupler Lights Stop, turn and running Forklift pockets standard Stabilizers Three-point outrigger design Tower center-mounted between two retractable rear outriggers and tongue jack Remains operational in wind gusts up to 65 mph Available Options Saf-T-Visor Ground Rod LSC100 auto light sequence Electric Winch Sound attention package Arctic package 220 VAC twist lock receptacle CSA models International models 8kw generator SHO-HD FIXTURES SHO-HD (super high output-high definition) parallel lamp fixtures provide over 50% more lumens per fixture than competitive llight towers. An optional Saf-T-Visor attachement directs previously wasted light onto the worksite. ENGINE-GENERATOR Engine-generator package includes an 1,800-rpm liquid-cooled diesel engine coupled to a 6kw generator. HEAVY-DUTY ENCLOSURES 30-gallon molded polyethylene fuel tank reduces the chance of contamination from rust and corrosion associated with metal. Provides approximately 65 hours of continuous operation. CAPTIVE TOWER LATCH Captive latch on tower support and outriggers eliminates potential for lost pins. FORKLIFT POCKETS Forklift pockets and lifting eye allow easy loading and unloading of up to 12 units on a flatbed truck

144 HEATERS TRADESMAN PFA HEATERS L.B.WHITE TRADESMAN portable forced air (PFA) heaters offer the best value in economical, high-volume construction heating. All Tradesman and Tradesman Ultra PFA heaters are engineered to deliver high heat output with the ability to move large volumes of air - plus solid state electronic ignition for sure starts, thermostatic controls and built-in safety features. Models ranging from 100,000 to 400,000 Btu/h %+ fuel efficient direct-fire design. Solid state electronic ignition. Weather resistant Tri-Shield finish. Service Saver diagnostic monitoring (Ultra models). Thermostatic control. Propane or natural gas. CSA Certification - United States. Model Tradesman Tradesman Tradesman Tradesman Tradesman Tradesman Tradesman Ultra 155N 155N Ultra Ultra Heat Rating Max Input (Btu/h) 100, , , , , , ,000 Min. Input (variable)(btu/h) 50, Configurations Available Ignition Type Piezo Piezo Piezo Piezo Piezo Piezo Piezo Heated Air Output Heated Air Output (CFM) Control System Service Saver - - Yes - Yes - Yes Standard Yes Yes Yes Yes Yes Yes Yes Fuel Consumption (max) LPG (lbs./hr.) 2.3 to NG (cu.ft./hr.) Inlet Gas Pressure LPG min/max (W.C.) NG (W.C.) (4 PSIG) (4 PSIG) Electrical Supply Amps (Starting/cont.oper.) Electrical Requirements 115 / 115 / 115 / 115 / 115 / 115 / 115 / (Volts/Hz/Phase) 60 / 1 60 / 1 60 / 1 60 / 1 60 / 1 60 / 1 60 / 1 Dimensions Height (in.) Length (in.) Width (in.) Net Weight (lbs.) Shipping Weight (lbs.) Additional Features Gas Hose (10 ft. - U.S.) Std. Std. Std. Std. Std. Std. Std. Regulator Std. Std. Std. Std. Std. Std. Std. Thermostat (unit mount) - Std. Std. Std. Std. Std. Std

145 HEATERS TRADESMAN K KEROSENE HEATERS For those times when gas may not be available, L.B. White Tradesman K Kerosene heaters offer the ultimate in efficient, portable construction heat. Available in heat outputs from 70,000 to 600,000 Btu/h, all Tradesman K portable heaters feature electronic ignition for sure starts, as well as thermostatic control for automatic operation and consistent temperature management. Key features of the Tradesman K series include: Models ranging from 70,000 to 600,000 Btu/h %+ fuel efficient direct-fire design. 250 to 3300 CFM heated air output. Dependable, solid state electronic ignition. Case Material Baked enamel. Standard Thermostatic control. Model Tradesman Tradesman Tradesman Tradesman K 165 K 350 K 600 K 70 Heat Rating Max Input (Btu/h) 165, , ,000 70,000 Configurations Available Ignition Type Hot Surface Hot Surface Hot Surface Hot Surface Heated Air Output Heated Air Output (CFM) Fuel Consumption (max) Kerosene or #1 Fuel Oil (gal./hr.) Operating Time / Tankful (hrs.) Tank Capacity (gal.) Pump Pressure Pump Pressure (PSI) Electrical Supply Amps (Starting/cont.oper.) 6.0 / / / / 2.5 Electrical Requirements 120 / 120 / 120 / 120 / (Volts/Hz/Phase) 60 / 1 60 / 1 60 / 1 60 / 1 Spark Plug Gap (in.) Dimensions Height (in.) Length (in.) Width (in.) Net Weight (lbs.) Shipping Weight (lbs.) Additional Features Cord Caddy Std Fuel Gauge Std. - - Std. Handle Std. Std. Std. Std. On/Off Switch Std. Std. Std. Std. Thermostat Std. Std. Std. Std. Wheels Std. Std. Std

146 HEATERS CONVECTION HEATERS Ideal for new construction sites or situations where electrical power is not readily available, L. B. White convection heaters offer easy to use, highly efficient heat with no electricity needed. L. B. White convection heaters include the lightweight Workman series designed for maximum portability, as well as the heavy-duty Norseman models which feature cast iron burners and heavy-gauge steel for maximum durability. All feature a proven design, reliable pilot light ignition and quick component access for easy operation and maintenance. Key features include: Models ranging from 100,000 to 250,000 Btu/h %+ fuel efficient direct-fire design. Dependable standard or piezo pilot ignition. Case material Heavy-gauge painted steel. Burner type Cast iron. Variable Btu/h output. Propane or natural gas models. CSA Certification United States. Model Norseman Norseman Norseman 200 Horizontal 200 Plus 250 Heat Rating Max Input (Btu/h) 200, , ,000 Configurations Available Ignition Type Pilot Piezo Pilot Pilot Heated Air Output Heated Air Output (CFM) Fuel Consumption (max) LPG (lbs./hr.) NG (cu.ft./hr.) Inlet Gas Pressure LPG (PSIG) NG (W.C.) Dimensions Height (in.) Length (in.) Width (in.) Net Weight (lbs.) Shipping Weight (lbs.) Additional features - options Gas Hose 10 ft. - U.S. Std. Std. Std. Regulator Std. Std. Std. Certifications: CSA - U.S. No Yes No

147 MATERIAL LIFTS SUPERLIFT ADVANTAGE The Material Handler with the largest selection of load handling attachments and accessories anywhere. GENIE LIFT There is a Genie Lift for every load. A manually operated material lift for construction and industrial applications. The Genie SuperLift Advantage is a package of options you select to design the Superlift you need and want...and you get more value for your money. It s easy as one, two, three: 1. Choose the base and the mast either Standard Base with five different lifting heights or Straddle Base with three different lifting heights. 2. Choose the load handling attachments you need. Standard Features: One speed winch. Patented telescoping mast system. Heavy-duty design for compactness, safety, strength and rigidity. Quick set-up requires no tools and is ready to work in seconds. Easy to load. In the stored position, roller wheels on the base of the legs allow the unit to be easily pushed around. Hold-down bar holds mast assembly in place during transport. Options and Accessories: Interchangeable load handling attachments handle a large variety of work loads. A safety brake is optional on all units. Rear transport wheel assembly. GENIE LOAD LIFTER The hand truck that lifts up to 200 pounds (91kg) to 5 feet 7 inches (1.7m). The Genie Lift s improved design provides years of reliable service. It is easily loaded in any size pickup truck to go wherever you need a lift. With three basic models to choose from, the Genie Lift is ideal for all your material handling needs. These are a few of the thousands of applications: Shipping/receiving. Record storage and retrieval. Transporting appliances. HVAC installation and repair. Lifting heavy materials to or Lifting equipment/computer products from shelves. in retail stores. Moving office equipment. Handling cement bags. Installing ceiling/wall appliances. Lifting and moving automotive parts. Standard Features: Durable steel forks. Hold-down mechanism secures carriage during transport. Reversible winch handle for easy storage. Winch operates while ladder is in use or stowed. Loads easily into a pickup truck for transporting. Options and Accessories: Load platform. Boom. Aluminum ladder Standard and Straddle Base. Pneumatic rear wheels - Standard and Straddle Base. Foot-release brake Standard and Straddle Base. Caster Options. SUPERLIFT CONTRACTOR A manually operated material lift for construction and industrial applications. An ideal tool for construction firms and every other kind of contractor. Standard Features: One person can safely and easily lift and move heavy loads. Designed and constructed of durable yet lightweight aluminum. Quiet high-speed reversible winch quickly lifts heavy loads. High strength aircraft quality cable prevents corrosion and fraying. Cushioned neoprene hand grip for easy handling. Corrosion resistant won t rust. Beveled aluminum platform for easy loading and unloading. Accessories are easy to install. Portable folds for compact storage and easy transport. 8-inch non-marking rear wheels are standard. All models include stair glides for easy handling on stairs. Options and Accessories: Pneumatic 8-inch rear wheels for rough terrain. Field-installed foot brake. 2-inch non-marking front swivel casters for easy maneuvering with heavy loads. Standard Features: Heavy-duty design, yet lightweight and portable. Quick set-up requires no tools. Loads easily into a pickup truck for transporting. Rear transport wheel assembly. 4-inch front casters and 5-inch rear casters with side brakes are standard. Hold-down bar holds mast assembly in place during transport. Options and Accessories: Fixed front caster option. Stabilizer set (standard on SLC-18 and SLC-24)

148 PERSONNEL LIFTS GENIE AWP SUPER SERIES (Aerial Work Platform) Genie Portable Aerial Work Platforms safely reach working heights of up to 46 ft. 3 in. (14.1m). Choose from compact, rough terrain, standard or wide base models and models that lift one person. All offer quick set-up and excellent maneuverability. Numerous options include an outreach package, power wheel assist, multiple platform options and AC, DC or Airmotor power. IWP Model Platform Height Lift Capacity Power Weight AWP Super Series 20 ft. 1 in. 40 ft. 3 in. ( m) lb. ( kg) AC, DC or Airmotor 655 1,130 lb. ( kg) The Genie Aerial Work Platform AWP can safely lift one person to working heights of up to 46 ft. 3 in. (14.1m). Easily maneuverable, offers durability and the convenience of quick set-up and operation. AWP GENIE IWP SUPER SERIES (Industrial Work Platform) GR GENIE RUNABOUT GR Model Platform Height Lift Capacity Power Weight Runabout GR 11 ft. 5 in ft. 11 in. ( m) lb. ( kg) DC 1,581-2,451 lb. (717-1,112kg) The Genie Runabout fits in tight work areas without outriggers. Elevates to a working height of up to 25 ft. 11 in. (8.07m). Extension deck platform option available. Model IWP Super Series Platform Height 20 ft. 6 in. 29 ft. 6 in. (6.22 9m) Lift Capacity 350 lb. (159kg) Power AC or DC Weight 1,245-1,530 lb. ( kg) The Genie Industrial Work Platform IWP utilizes a revolutionary design to provide stable working heights of up to 35 ft. 6 in. (10.8m) without outriggers. Outreach and power wheel assist options available

149 TELESCOPIC STICK BOOMS Self-Propelled Telescopic Booms Genie Telescopic S Stick Booms set the industry standard for personnel lifts. With working heights from 46 to 131 feet (14 to 39.9m), articulated jibs on the S-45, S-65, S-85, S-105 and S-125 models, and options including two- and four-wheel drive, rough terrain packages and multi-power capabilities, we give you just the lift you need. Specifications Model S -40 S -45 S -60X S -65 Working height 46' 51' 66' 71' Platform height 40' 45' 60' 65' Height - stowed 8' 2" 8' 2" 8' 11" 8' 11" Length - stowed 24' 3" 27' 10" 27' 11" 31' 2" Width 7' 6" 7' 6" 8' 2" 8' 2" Wheelbase 7' 3" 7' 3" 8' 2.5" 8' 2.5" Ground clearance 1' 0.5" 1' 0.5" 1' 2.5" 1' 2.5" Platform length (6'/8') 30"/36" 30"/36" 30"/36" 30"/36" Platform width (6'/8') 72"/96" 72"/96" 72"/96" 72"/96" Horizontal reach 31' 8" 36' 8" 50' 10" 56' 2" Lift capacity 500 lb. 500 lb lb. 500 lb. Turning radius (outside) 15' 8" 15' 8" 18' 2" 18' 2" Turning radius (inside) 6' 8" 6' 8" 7' 9" 7' 9" Turntable rotation 360º 360º 360º 360º Turntable tailswing 34" 34" 4' 4' Power source Ford DSG cylinder gas/lpg 75 hp (56kW) Deutz D2011L03i 3 cylinder 46 hp (34.3kW) Perkins 404D cylinder diesel 51 hp (38kw) Hydraulic tank capacity 45 gal. 45 gal. 45 gal. 45 gal. Fuel tank capacity 20 gal. 20 gal. 40 gal. 40 gal. Weight 12,300 lb. 15,200 lb. 20,570 lb. 22,100 lb. Specifications Model S -80X S -85 S -100 S -105 S -120 S -125 Working height 86' 91' 106' 111' 126' 131' 2" Platform height 80' 85' 100' 105' 120' 125' 2" Height - stowed 9' 2" 9' 2" 10' 1" 10' 1" 10' 1" 10' 1" Length - stowed 36' 6" 40' 42' 8" 46' 42' 8" 46' 9" Width 8' 2" 8' 2" 8' 2" 8' 2" 8' 2" 8' 2" Wheelbase 9' 4" 9' 4" 12' 12' 12' 12' Ground clearance 13" 13" 1' 5.5" 1' 5.5" 1' 5.5" 1' 5.5" Platform length (6'/8') 30"/36" 30"/36" 30"/36" 30"/36" 30"/36" 30"/36" Platform width (6'/8') 72"/96" 72"/96" 72"/96" 72"/96" 72"/96" 72"/96" Horizontal reach 71' 6" 76' 6" 75' 80' 75' 80' Lift capacity lb. 500 lb. 750 lb. 500 lb. 750 lb. 500 lb. Turning radius (outside) 21' 6" 21' 6" 21' 7" 21' 7" 22' 2" 22' 2" Turning radius (inside) 12' 12' 13' 7" 13' 7" 13' 2" 13' 2" Turntable rotation 360º 360º 360º 360º 360º 360º Turntable tailswing 4'8" 4'8" 5' 6" 5' 6" 5' 6" 5' 6" Power source Deutz TD2011 LO4i 4 cylinder turbo Cummins B3.3T 4 cylinder turbo diesel 80 hp (60kW) diesel 74 hp (55kW) Deutz TD 2011 L04i 4 cylinder turbo diesel 74 hp (55kW) Perkins 804D hp (47kw) Perkins T 4 cylinder turbo diesel 83 hp (62kW) Continental TME27 4 cylinder gas/lpg 74 hp (55kW) Hydraulic tank capacity 40 gal. 40 gal. 55 gal. 55 gal. 55 gal. 55 gal. Fuel tank capacity 35 gal. 35 gal. 40 gal. 40 gal. 40 gal. 40 gal. Weight 2WD/4WD 35,460/35,560 lb. 37,900/38,000 lb. 39,700 lb. 40,000 lb. 44,340 lb. 44,640 lb

150 ARTICULATING BOOMS Genie Articulating Z TM Booms provide the ultimate in lifting versatility, with up, out and over positioning capabilities. Many options are available, including: two- and four-wheel drive; a rough terrain package; narrow access models that roll through standard double doorways; gas/lpg, diesel, electric and bi-fuel capabilities. Choose from models with working heights from 52' 2" to 86'; horizontal reach from 25' to 60'. Specifications Model Z-45/25 RT Z-45/25J RT Z-60/34 Z-80/60 Working height 51' 11" 52' 2" 66' 4" 84' Platform height 45' 11" 46' 2" 60' 4" 78' Height - stowed 6' 11" 6' 11" 8' 10" 9' 10" Length - stowed 18' 3" 22' 5" 26' 9" 37' Length - transport 30' Width 7' 6" 7' 6" 8' 1" 8' 2" Wheelbase 6' 8" 6' 8" 8' 3" 9' 4' Ground clearance 1' 3.5" 1' 3.5" 1' 4" 12" Platform length (6'/8' platform) 30" 30" 30"/36" 30"/36" Platform width (6'/8' platform) 72" 72" 72"/96" 72"/96" Horizontal reach 25' 25' 1" 36' 3" 60' Up and over clearance 23' 6" 24' 2" 27' 29' Lift capacity 500 lb. 500 lb. 500 lb. 500 lb. Turning radius Outside (4WS/2WS) 14' 9" 14' 9" 19' 11" 15'/24' 6" Inside (4WS/2WS) 5' 6" 5' 6" 10' 7'/15' Turntable rotation 355º non-continuous 355º non-continuous 360º continuous 360º continuous Tailswing zero zero zero 3' 10" (elevated position) Power source Ford DSG cylinder gas/lpg 75 hp (56kW) Deutz TD 2011 L04i 4 cylinder Deutz D2011L03i 3 cylinder diesel 48 hp (35.8kW diesel 78 hp (58kW) Perkins 404D-22 4 cylinder diesel 51 hp (38kW) Perkins 804D-33 4 cylinder diesel 63 hp (47kW) Continental TME27 4 cylinder gas/lpg 74 hp (55kW) Drive speed - stowed 5.0 mph 5.0 mph 3.0 mph 3.0 mph Drive speed - raised 0.61 mph 0.61 mph 0.68 mph 0.68 mph Lift speed to full height 45 sec 45 sec 76 sec Controls 12V DC proportional 12V DC proportional 12V DC proportional 12V DC proportional Auxiliary power unit 12V DC 12V DC 12V DC 12V DC Platform rotations 180º 160º 180º 160º Tires 355/55 D /55 D /65 D19.5, 12 ply NHS Gradeability (2WD/4WD) 30%/45% 30%/45% 25%/40% 30%/45% Hydraulic tank capacity 24 gal. 24 gal. 45 gal. 45 gal. Fuel tank capacity 17 gal. 17 gal. 20 gal. 35 gal. Weight (2WD/4WD) 13,675 lb./13,875 lb. 14,300 lb./14,500 lb. 22,520 lb. 35,900 lb./37,500 lb

151 TRAILER MOUNTED BOOMS TZ -34/20 For over 30 years Genie has been dedicated to designing and manufacturing the best lifting equipment in the industry. Our Trailer Mounted Z-Booms demonstrate this dedication by setting new standards for quality, value and innovation in the trailer mounted boom market. TZ -50 Specifications Model TZ -34/20 Working height 40' Platform height 34' Height - stowed 76.5" Length - stowed 18' 5" Width - stowed 4' 9.1" Ground clearance 9.5" Platform length 26.8" Platform width 44" Entry height - extended 6.4" Outreach - working 18' 4" Outrigger footprint - length 8' 4" Outrigger footprint - width 9' 4" Leveling capability hydraulic outriggers 11º Lift capacity - ANSI, CSA standard platform 500 lb. platform rotation option 460 lb. Turntable rotation 359º non-continuous Towing speed rating 60 mph Power sources 24V DC AC wiring to platform standard Tongue weight 315 lb. Tire size ST 205x75 R15 Surge brakes standard Parking brake standard Weight 3,155 lb. Specifications Model TZ -50 Working height 55' 6" Platform height 49' 6" Height - stowed 82" Length - stowed 23' 6" Width - stowed 5' 6" Ground clearance 10" Platform length 26.8" Platform width 44" Entry height - extended 1' 8" Outreach - working 29' 2" Outrigger footprint - length 14' 4" Outrigger footprint - width 14' 4" Leveling capability hydraulic outriggers 10º Lift capacity - ANSI, CSA standard platform 500 lb. platform rotation option 500 lb. Turntable rotation 359º non-continuous Towing speed rating 60 mph Power sources 24V DC four 6V 225 Ah batteries AC wiring to platform standard Tongue weight 400 lb. Tire size 215 R14C Surge brakes standard Parking brake standard Weight (ANSI, CE/CSA) 4,400 lb./4,464 lb

152 MESSAGE SIGNS / ARROW PANELS SILENT MESSENGER Portable, Changeable Message Signs Solar Powered Three sizes to suit your requirements and applications. On screen prompts in English, French, Spanish, German and Dutch. Full matrix display with graphics capability. Built-in weatherproof control console. Pre-wired for cellular remote control. Polyethylene fenders and battery compartments. Automatic fault detection and error correction. Torsion-type axle for a smooth, stable ride. Advanced solar energy management and control system. MODELS: Silent Messenger MB Watt MB Watt MB Watt MB Watt SILENT MESSENGER SPECIFICATIONS Length Overall in. (457cm) Operating Voltage...12 Volts DC Width Overall...92 in. (234cm) Number of Batteries...Eight (8)* Height Operating in. (412cm) Battery Bank Capacity Amp Hours* Weight lbs. (1220kg) *Upgradable to12 batteries (1800 Amp Hours) SILENT SENTINEL Arrow Boards Solar Powered Two sizes to suit your requirements and applications. Built-in weatherproof control console. Pre-wired for cellular remote control. Polyethylene fenders and battery compartments. Automatic fault detection and error correction. Torsion-type axle for a smooth, stable ride. Advanced solar energy management and control system. Silent Sentinel MODELS: AB-0515 AB-0715 AB-0525 AB or 25 Lamp Arrow Panel 50 or 75 Watt Solar Array SILENT SENTINEL SPECIFICATIONS Length Overall in. (254cm) Operating Voltage...12 Volts DC Width Overall...96 in. (244cm) Number of Batteries...Two (2)* Height Operating in. (340cm) Battery Bank Capacity Amp Hours* Weight lbs. (535kg) *Upgradable to 4 batteries (600 Amp hours) Truck Mounted Message Signs and Arrow Boards also available Silent Sentinel Silent Messenger II Silent Messenger III Arrow Panels Dynamic Message Signs Dynamic Message Signs 15 or 25 Lamps 92" x 54" Sign Panel 70" x 42" Sign Panel Size C Panel (96" x 48") (234cm x 137cm) (178cm x 107cm) (122cm x 244cm) Full Matrix Display Full Matrix Display Size B Panel (60" x 30") (48 x 27 pixels) (48 x 27 pixels) (76cm x 152cm)

153 HAND TOOLS / WHEELBARROWS E F G A B D C H I Handle Head / Pk. / Key Item No. Brand Length Blade Size Cube Wt. Lbs. Description A BMTLR Jackson 48" 9-1/2" x 12" /26 Round Point Shovel 48" Long Handle Roll Back Step B BMTLS Jackson 48" 10' x 12" /24.3 Square Point shovel 48" Long Handle Roll Back Step Blade Size Pk. / Key Item No. Brand Head Width Cube Wt. Lbs. Description C Pony 17-7/8" 2.7 6/27.6 Heavy-duty road rake. 14 teeth. 66" handle. D Kodiak 22" / tine spring brace rake. 54" handle. Handle Head Eye Pk. / Key Item No. Brand Length Weight Size Wt. Lbs. Description E Jackson 32"/36" Hickory 10 lb. 1' x1-3/8" 2/ lb. Double face sledge hammer. Pk. / Key Item No. Brand Capacity Cube Wt. Lbs. Description F M11T22 Jackson 6 cu. ft /63.0 Contractor Wheelborrow. Folded Seamless steel tray with wire reinforced trim makes the strongest wheelbarrow avaialble. Steel front tray braces, H brace, cross strips and leg stabilizers. 16" wheel assembly with pneumatic 2-ply tire with oilube bearing. G M11FFBB Jackson 5-3/4 cu. ft /65 Folded steel tray. H-brace, steel cross strips and leg stabilizers. 16" wheel assembly with solid tire and ball bearings. Extra-large, moisture-resistant, strong hardwood handles for heavy use. Pk. / Key Item No. Brand Cube Wt. Lbs. Description H FFTCC True-Temper /24.0 Flat-Free solid tire. I FFTKBCC Jackson /24.0 Solid knobby tire, flat-free

154 SAFETY GLASSES Meets the requirements of ANSI Z87.1 Ultra-cool and ultra-lightweight polycarbonate frames ensure worker acceptance Wraparound design fits snugly for total optical protection. Lens offers 99% UV protection Features a 9.75-base spherical polycarbonate lens THE ORIGINAL Item # Temple Frame Lens ECONOMY Same great style and fit with Smoke Smoke Smoke Smoke Silver Silver Mirror Smoke Gold Gold Mirror Clear Clear Clear Amber Amber Amber Blue Blue Blue Mirror an uncoated lens. Provides a great low cost alternative. Available in 2 choices: Item # Temple Frame Lens Smoke Smoke Smoke Clear Clear Clear Lightweight contemporary design 6.75 base curve single lens Convenient spectacle strap included Item # Frame Lens Black Clear Black Smoke Wraparound design for optimal coverage High-gloss finish 9.5 base curve single lens Item # Temple Frame Lens Pewter Pewter Smoke Blue Blue Smoke Smoke Pewter Silver Mirror Smoke Silver In/Out Mirror Smoke Blue Blue Mirror Frameless lightweight design No-brow design increases upward and peripheral vision 7 base single lens Rubber tip temple for extra hold Item # Temple Lens Adjustable nose pad for comfortable fit Black Smoke Frameless wraparound design 6.5 base curve single lens Adjustable nose pad for comfortable fit Item # Temple Lens Black/Silver Clear Black/Silver Silver Mirror Black/Silver Amber All ERB Safety Eyewear is manufactured under the ISO 9001/2000 Quality System All ERB Eyewear is protected with a hardcoat finish to provide scratch resistance unless otherwise stated All ERB Safety Eyewear meet the requirements of ANSI Z High Impact All ERB Eyewear have polycarbonate lenses that offer 99% UV protection Lens Coatings Guide: Hard Coating Protective coating on lens that is resistant to scratches in abrasive environments to extend lens life Anti-Fog Coating Provides resistance to moisture in high humidity environments and occurrences of temperature shifts UV Protection Absorbs more than 99% of harmful ultraviolet radiation

155 SAFETY HARNESS / LANYARD / LIFELINE 3M Safewaze HARNESSES SAFELIGHT Universal size. Back D-ring and optional front D-ring UNIVERSAL HARNESS UNIVERSAL HARNESS - GROMMET LEG STRAPS (XS ECONOMY ALSO AVAILABLE) UNIVERSAL HARNESS - GROMMET LEG STRAPS AND WAIST D-RINGS (XS ECONOMY ALSO AVAILABLE) APACHE Must be used in conjunction with the 400 lb. Shock Absorbing Lanyard. Full body harness to support larger workers. 4" stationary back pad and shoulder pads. Back D-ring APACHE HARNESS - (S, M, L, XL, XXL, XXXL) APACHE HARNESS - (S, M, L, XL, XXL, XXXL) WAIST D-RINGS EVOLUTION Back D-ring, side D-ring. All quick connect connectors AIRFLEX COMFORT - (S, M, L, XL, XXL) 3M Safewaze LIFELINE 5/8" LIFELINE with LOCKING SNAP HOOK WORKSAFE with BACK PAD Specially designed for positioning applications BODY HARNESS W/ BACK PAD - (S, M, L, XL, XXL) Double-locking snap hook on one end. and back spliced on the other end. Constructed of 5/8" SafeCom Polydac blended rope. 100' length. Low Elasticity /8" LIFELINE W/ LOCKING SNAP 3M Safewaze LANYARDS SAFELIGHT LANYARDS Polyester web. SafeStop Shock Absorber with clear UV Resistant Plastic. Lightweight for improved work function and comfort FT. SHOCK LANYARD FT. SHOCK LANYARD DOUBLE 6FT SHOCK WEB LANYARD 100% TIE-OFF ! WARNING Fall Protection Products Compliant fall protection and emergency rescue systems help prevent serious injury during fall arrest. Users must read and understand the User Instructions provided with the product and be properly trained by their employer prior to use per OSHA and or applicable local standards. Misuse or failure to follow warnings and instructions may result in serious personal injury or death. For proper use, see supervisor, User Instructions, or call Technical Service at

156 USEFUL INFORMATION English standard measures of length MEASURES OF LENGTH 1 mile = 1760 yards = 5280 feet. 1 yard = 3 feet = 36 inches. 1 foot = 12 inches. The following measures of length are also used occasionally: 1 mil=0.001 inch. 1 fathom = 2 yards = 6 feet 1 rod = 5.5 yards = 16.5 feet. 1 hand = 4 inches. 1 span = 9 inches SURVEYOR S MEASURE 1 mile = 8 furlongs = 80 chains. 1 furlong = 10 chains = 220 yards. 1 chain = 4 rods = 22 yards = 66 feet = 100 links. 1 link = 7.92 inches. SQUARE MEASURE 1 square mile = 640 acres = 6400 square chains. 1 acre = 10 square chains = 4840 square yards = 43,560 square feet. 1 square chain = 16 square rods = 484 square yards = 4356 square feet. 1 square rod = square yards = square feet = 625 square links. 1 square yard = 9 square feet. 1 square foot = 144 square inches. An acre is equal to a square, the side of which is feet. English standard measures of volume CUBIC MEASURE 1 cubic yard = 27 cubic feet. 1 cubic foot = 1728 cubic inches. The following measures are also used for wood and masonry: 1 cord of wood = 4 x 4 x 8 feet = 128 cubic feet. 1 perch of masonry = 16½ x 1½ x 1 foot = 24¾ cubic feet. DRY MEASURE 1 bushel (U.S. or Winchester struck bushel) = cubic foot = cubic inches. 1 bushel = 4 pecks = 32 quarts = 64 pints. 1 peck = 8 quarts = 16 pints. 1 quart = 2 pints. 1 heaped bushel = 1¼ struck bushels. 1 cubic foot = struck bushel. 1 British Imperial bushel = 8 Imperial gallons = cubic foot = cubic inches. LIQUID MEASURE 1 U.S.gallon = cubic foot = 231 cubic inches = 4 quarts = 8 pints. 1 quart = 2 pints = 8 gills. 1 pint = 4 gills. 1 British Imperial gallon = U.S. gallon = cubic inches. 1 cubic foot = 7.48 U.S. gallons. English standard measures of weight AVOIRDUPOIS OR COMMERCIAL WEIGHT 1 gross or long ton = 2240 pounds. 1 net or short ton = 2000 pounds. 1 pound = 16 ounces = 7000 grains. 1 ounce = 16 drachms = grains. CIRCULAR AND ANGULAR MEASURE 60 seconds ( ) = 1 minute ( ) 60 minutes = 1 degree ( ) 360 degrees = 1 circumference (C). Metric system of measurements MEASURES OF LENGTH 10 millimeters (mm) = 1 centimeter (cm.). 10 centimeters = 1 decimeter (dm.). 10 decimeters = 1 meter (m) 1000 meters = 1 kilometer (Km.) SQUARE MEASURE 1000 square millimeters (mm.²) = 1 square centimeter (cm.²). 100 square centimeters = 1 square decimeter (dm.²). 100 square decimeters = 1 square meter (m.²). SURVEYOR S SQUARE MEASURE 100 square meters (m.²) = 1 are (ar.). 100 ares = 1 hectare (har.). 100 hectares = 1 square kilometer (Km.²). CUBIC MEASURE 1000 cubic millimeters (mm.³) = 1 cubic centimeter (cm.³) cubic centimeters = 1 cubic decimeter (dm.³) cubic decimeters = 1 cubic meter m.³). DRY AND LIQUID MEASURE 10 millimeters (ml.) = 1 centiliter (cl.). 10 centiliters = 1 deciliter (dl.). 10 deciliters = 1 liter (L.). 100 liters = 1 hectoliter (HL.). 1 liter = 1 cubic decimeter = The volume of 1 kilogram of pure water at a temperature of 39.2 degrees F. MEASURES OF WEIGHT 10 milligrams (mg.) = 1 centigram (cg.). 10 centigrams = 1 decigram (dg.). 10 decigrams = 1 gram (g.). 10 grams = 1 decagram (Dg.). 10 decagrams = 1 hectogram (Hg.). 10 hectograms = 1 kilogram (Kg.) kilograms = 1 (metric) ton (T.). Miscellaneous information To find the diameter of a circle multiply the circumference by To find the circumference of a circle multiply the diameter by To find the area of a circle multiply the square of the diameter by To find the surface of a ball multiply the square of the diameter by To find the side of an equal square multiply the diameter by To find the cubic inches in a ball multiply the cube of the dia. by To double the diameter of a pipe increase its capacity four times. Double riveting is from 16 to 20 per cent stronger than single. One cubic foot of anthracite coal weighs about 53 pounds. One cubic foot of bituminous coal weighs from 47 to 50 pounds. One ton of coal is equivalent to two cords of wood for steam purposes. A gallon of water (U. S. standard) weighs 8-1/3 pounds and contains 231 cubic inches. A standard or Winchester bushel contains cubic inches. There are 9 square feet of heating surface to each square foot of grate surface. A cubic foot of water contains 7½ gallons, 1728 cubic inches and weighs 62½ pounds. Each nominal horse power of a boiler requires 30 to 35 pounds of water per hour. A horse power is equivalent to raising 33,000 pounds 1-foot per minute or 550 pounds 1-foot per second. The average consumption of coal for steam boilers is 12 pounds per hour for each square foot of grate surface. To find the pressure in pounds per square inch of a column of water multiply the height of the column in feet by.434. Steam rising from water at its boiling point (212 degrees) has a pressure equal to the atmosphere (14.7 pounds to the square inch). To evaporate one cubic foot of water requires the consumption of 7½ pounds of ordinary coal, or about 1-pound of coal to 1-gallon of water. The right amount of water for cement mixtures of varying strength is shown in the following table: Correct amount of water Water per Cement Sand Gravel Sack of Cement 1 sack 1¼ cu.ft. 2½ cu.ft. 5 to 5½ gal. 1 sack 1½ cu.ft. 3 cu.ft. 5½ to 6 gal. 1 sack 2 cu.ft. 3 cu.ft. 5¾ to 6¼ gal. 1 sack 2 cu.ft. 4 cu.ft. 6 to 6½ gal. 1 sack 2½ cu.ft. 5 cu.ft. 7¼ to 7¾ gal. 1 sack 3 cu.ft. 6 cu.ft. 8¼ to 8¾ gal. Below is a table which shows that improper quantities of water wastes the strength of cement. Not enough water 10% too little water wastes 27% of the cement strength. 6% too little water wastes 10% of the cement strength. Too much water. 7% too much water wastes 10% of the current strength. 12% too much water wastes 20% of the cement strength. 18% too much water wastes 30% of the cement strength. 25% too much water wastes 40% of the cement strength. 31% too much water wastes 50% of the cement strength. 42% too much water wastes 60% of the cement strength. 63% too much water wastes 70% of the cement strength. Properties of circles Diameter being given, to find the circumference, multiply diameter by Diameter given, to find area, square the diameter and multiply the product by.7854, or multiply ½ the diameter by ½ the circumference. Area given, to find the diameter, divide the area by.7854 and extract the square root of the quotient. Diameter given, to find side of a square containing same area, multiply the diameter by V

157 Incorporating the Virginia Track & Equipment platform allows us to offer a full range of heavy equipment rentals, sales, services and parts to complement our existing compact construction equipment and supply business. Excavators Wheel Loaders Motor Graders Crawler Dozers Track Loaders Articulating Trucks Compactors Ground Engagement Tools Sign Stands Safety Cones Trench Boxes Heavy Equipment 6 163

158 EXCAVATORS EXCAVATORS 12 METRIC TONS to 30 METRIC TONS PC200-8 PC200LC-8 HORSEPOWER Gross: 155 HP 2000 rpm Net:148 HP 2000 rpm OPERATING WEIGHT PC200-8: 43,540 44,110 lbs. ( kg) PC200LC-8: 46,080 47,260 lbs. ( kg) PC228USLC-3 With Tier 3 Engine FLYWHEEL HORSEPOWER 148 HP 2000 rpm OPERATING WEIGHT 49,900 51,110 lbs. ( kg) BUCKET CAPACITY yd. 3 ( m 3 ) PC130-8 NET HORSEPOWER 92 HP 2200 rpm OPERATING WEIGHT 27,700 lbs. (12560kg) BUCKET CAPACITY yd. 3 ( m 3 ) PC160LC-8 NET HORSEPOWER 115 HP 2200 rpm OPERATING WEIGHT 36,770 37,740 lbs. ( kg) BUCKET CAPACITY yd. 3 ( m 3 ) PC200LC-8 Thumb Specification NET HORSEPOWER 148 HP 2000 rpm OPERATING WEIGHT 51,199 53,115 lbs. ( kg) BUCKET CAPACITY yd. 3 ( m 3 ) PC160LC-7 With Tier 3 Engine FLYWHEEL HORSEPOWER 115 HP 2200 rpm OPERATING WEIGHT 36,640 37,790 lbs. ( kg) BUCKET CAPACITY yd. 3 ( m 3 )

159 WHEEL LOADERS FULL SIZE WHEEL LOADERS AND TOOL CARRIERS WA200-6 NET HORSEPOWER 126 HP 2000 rpm OPERATING WEIGHT 23,160-23,733 lbs. ( kg) BUCKET CAPACITY yd. 3 ( m 3 ) WA200PZ-6 NET HORSEPOWER 126 HP 2000 rpm OPERATING WEIGHT 25,275-25,420 lbs. ( kg) BUCKET CAPACITY yd. 3 ( m 3 ) WA250PZ-6 NET HORSEPOWER 138 HP 2000 rpm OPERATING WEIGHT 26,808-27,778 lbs. ( kg) BUCKET CAPACITY yd. 3 ( m 3 ) WA320-6 NET HORSEPOWER 167 HP 2000 rpm OPERATING WEIGHT 31,590-32,080 lbs. ( kg) BUCKET CAPACITY yd. 3 ( m 3 ) WA320PZ-6 NET HORSEPOWER 167 HP 2000 rpm OPERATING WEIGHT 32,480-33,900 lbs. ( kg) BUCKET CAPACITY yd. 3 ( m 3 ) WA250-6 NET HORSEPOWER 138 HP 2000 rpm OPERATING WEIGHT 25,441-25,904 lbs. ( kg) BUCKET CAPACITY yd 3 ( m 3 )

160 MOTOR GRADERS 12H Operating weights (approximate) on front wheels 7,702 lbs. on rear wheels 21,128 lbs. total machine 28,830 lbs. 120H Operating weights (approximate) on front wheels 6,976 lbs. on rear wheels 18,064 lbs. total machine 25,040 lbs. 140H Gross vehicle weight bass max. 29,878 lbs. 32,321 lbs. D A H I B F G C E Dimensions 12H 120H 140H A. Width -tire center lines 6' 10" 6'9" 6'9" B. Width - outside front tires 7'11" 7'11" 8'1" C. Width - outside rear tires 8'0" 8'0" 8'0" D. Height - top of cab 10'2" 10'2" 10'3" E. Length - counterweight to ripper 32'10" 31'8" 32'10" F. Length - front tire to rear of machine 27'9" 26'9" 27'10" G. Length - front axle to mid tandem 20'0" 19'3" 20'11" H. Length - between tandem axles 5'0" 4'11" 5'0" I. Length - front axle to moldboard 8'5" 8'6" 9'5"

161 CRAWLER DOZERS C G Engine Flywheel Power 125 hp A B I D E F 6 H Weights Operating Weight XL Operating Weight LGP 28,409 lbs. 29,690 lbs. Dimensions D6K XL LGP A Track gauge 70 in. 79 in. B Width of tractor with the following attachments: Standard shoes without blade Standard shoes with VPAT blade angled 25 Standard shoes with foldable blade in transport position C Machine height from tip of grouser with the following equipment: ROPS canopy ROPS cab 92 in. 111 in. 92 in. 116 in. 116 in. 109 in. 123 in. 109 in. 116 in. 116 in. D Drawbar height (center of clevis) from ground face of shoes 19 in. 19 in. E Length of track on ground 104 in. 104 in. F Length of basic tractor (with C-Frame) 166 in. 166 in. With the following attachments, add to basic tractor length: Drawbar Ripper PA50 winch VPAT blades, straight VPAT blade, angled in. 45 in. 25 in. 18 in. 44 in. 13 in. 45 in. 25 in. 18 in. 46 in. G Height over stack from tip of grouser 115 in. 115 in. H Height of grouser 2 in. 2 in. I Ground clearance from ground face of shoe (per SAE J1234) 14 in. 14 in. Small and Medium Dozers D3 Net power (SAE J1349) 74 hp Weights Operating weight XL 17,185 lbs. Operating weight LGP 17,842 lbs. 5 H I D4 Net power (SAE J1349) Weights Operating weight XL Operating weight LGP 84 hp 17,961 lbs. 18,742 lbs. A B G 1J K D C Grouser Height: 1.9" F D5 Net power (SAE J1349) 96 hp Weights Operating weight XL 20,741 lbs. Operating weight LGP 21,347 lbs. Dimensions D3K D4K D5K XL LGP XL LGP XL LGP LGP w/ 30" shoes A Track gauge 58.9" 67.9" 61" 67.9" 63" 68.9" 73.2" B Width of tractor (std shoes, no blade) 74.8" 92.9" 79.1" 92.9" 83.1" 94.9" 103.5" C Overall length (w/blade) 168" 167.6" 168.3" 168" 170.1" 169.1" 169.1" D Length of basic tractor (w/o blade) 128.9" 128.9" 128.9" 128.9" 128.5" 128.5" 128.5" E Tractor height 108.8" 108.8" 108.8" 108.8" 109" 109" 109" F Ground clearance 13" 13" 13" 13" 13" 13" 13" BLADE XL Intermediate LGP XL Intermediate LGP XL Intermediate LGP G Blade width 104.2" 115" 124" 109.5" (115" 123.9" 109.5" 115" 126.7" H Blade height 35.8" 33.9" 33.8" 39.8" 33.9" 35.8" 42.2" 39.8" 39.8 I Blade lift height 28.7" 29.3" 28.7" 29.3" 29.3" 27.9" 30.2" 30.2" 30.2" J Digging depth 22.5" 22.5" 22.5" 22.5" 23.2" 23.2" 23.1" 22.5" 22.5" K Blade cutting edge angle, adjustable Maximum tilt Maximum angle (either side) Blade width at maximum angle Blade capacity (SAE) 52 to " " 1.99 yd to " " 1.96 yd to " " 2.17 yd to " " 2.59 yd to " " 1.96 yd to " " 2.42 yd to " " 2.86 yd to " " 2.73 yd to " " 2.73 yd

162 TRACK LOADERS Medium Track Loaders Flywheel Power 148 hp (110kW) Operating Weight lbs. (15595kg) Capacity - General Purpose 2.42 yd. 3 (1.85m 3 ) Large Track Loaders Flywheel Power 189 hp (141kW) Operating Weight 44,577 lbs. (20220kg) Capacity - General Purpose 3.2 yd. 3 (2.45m 3 ) A Overall machine width without bucket: with standard tracks with narrow tracks " 85.8" *With general purpose bucket and extra duty teeth. Dimensions vary with bucket. Refer to Operating Specifcations chart. 89.7" 85.8" B Ground clearance 16.3" 18.5" C Machine height to top of cab 122.2" 131.3" D Length to front of track 171.7" 187 E Overall machine length* 246.1" 273.3" F Carry position approach angle G Digging depth* 5.5" 5.4" H Maximum rollback at ground I Maximum rollback at carry position J Bucket height in carry position 21.6" 18" K Reach at full lift height and 45 dump* 47" 54" L Clearance at full lift height and 45 dump* 106" 114.8" M Maximum rollback, fully raised N Maximum dump, fully raised Grading angle O Height to bucket hinge pin 142.1" 155.1" P Overall machine height, bucket fully raised 192.2" 212.7" Q Height to top of seat with headrest 100.7" 109.8" R Height to top of stack 109.6" 116.3" B A C M K N O P Q R H I L J D E F G

163 ARTICULATING TRUCK 25 Ton Articulating Truck Excellent Operator Environment A spacious and comfortable cab with centrally positioned operator contributes to high productivity throughout the shift. Ergonomically positioned controls, air-conditioning, air suspension seat with tilt/telescopic steering wheel, wide angle forward view for reduced operator fatigue and high safety. Heavy-Duty Axles Purpose built with 100% dog clutch type diff-lock. Exhaust Brake and Retarders Easy to operate powerful retardation systemreduces wear and operating cost. 6x4 and 6x6 with Five Operating Modes Easy to use drive combinations for every type of operating condition, reduces fuel consumption, driveline and tire wear and increases off-road mobility. Automatic Traction Control (ATC) simplifies operation, promotes longer tire life and reduced fuel consumption. Volvo Drive Train Correctly matched Volvo-designed components, specifically developed for hauler applications. Low power losses and long service life. 6-speed transmission gives smooth shifting and high power at all times. Load capacity A25D Standard Body Load capacity 26.5 sh. tn. (24000kg) Body, struck 15.3 yd. 3 (11.7m 3 ) Body, heaped 19.6 yd. 3 (15,0m 3 ) With underhung tailgate Body, struck 15.7 yd. 3 (12.0m 3 ) Body, heaped 20 yd. 3 (15.3m 3 ) With overhung tailgate Body, struck 15.8 yd. 3 (12.1m 3 ) Body, heaped 20.4 yd. 3 (15.6m 3 ) With over- and underhung tailgate Body, struck 15.8 yd. 3 (12.1m 3 ) Body, heaped 20.4 yd. 3 (15.6m 3 ) State-of-the-Art Hydraulic System Variable displacement piston pumps consume power only when required. Volvo s Unique Self-compensating Hydro-mechanical Steering Powerful and accurate steering for safe operation and high productivity. Speed A25D Forward mph (8km/h) mph (12km/h) mph (22km/h) mph (31km/h) mph (40km/h) mph (53km/h) Reverse mph (8km/h) mph (13km/h) Purpose-built dropbox Proven in-line drop-box provides excellent ground clearance, gives stability and low internal power losses. Serviceability No daily or weekly greasing. Swing Down Front Service Platform Grouped engine filters and remote mounted drains reduce service time. Contronic System electronically monitors fluid levels and systems for ease of service and troubleshooting. Maintenance Free Suspensions The straddle mounted bogie beam gives large wheel movement and low frame stress. Low pivot point enhances stability. Front axle has independent wheel movement via a 3-point mounting system. Frames and Chassis Box type design frames provides strong, weight optimized, high quality frames for long service life. Rotating hitch and articulated steering provides good off-road mobility and less stress on the frames in tough applications. High positioned hitch provides high ground clearance and stability. High strength steel 400 HB body High chute and tipping joint with 70º or greater dump angle promotes load retention and ejection. High-Capacity Cooling System Power and fuel saving, hydraulically driven, side mounted variable speed fan consumes power only when needed

164 COMPACTORS Soil Compactors High performance, seven-ton compactor The SD Series vibratory soil compactors with 66 inch (1676mm) and 84 inch (2134mm) vibratory drums offer many innovative features that provide excellent drum performance, serviceability, reliability and a safe, comfortable and productive environment for the operator. The SD-77DX /SD-122DX smooth drums and SD-77F padfoot drum are engineered to efficiently and effectively compact all types of soils granular, mixed or cohesive. KEY FEATURES Audible and visual warning light for engine oil pressure, coolant temperature, hydraulic oil temperature and air cleaner restriction. Battery master switch. Centrally located remote-mounted hydraulic oil filters and hydraulic test ports with quick disconnect fittings. Control console also includes cup holder, storage and power outlet. Easily accessible battery protected behind hinged steps. Gauges for coolant temperature, fuel, hour meter and tachometer. Heavy-duty axle with No-Spin differential. Hydraulic and eccentric oil level sight gauges. Inside drum scraper bar. Lockable control panel, engine cover and fill caps. Premium 6-way adjustable suspension seat, including swivel feature and arm rest. Premium shock mounts for operator platform. Rear-mounted cooling system, easy access for cleaning. ROPS/FOPS with seat belts. Safety features include skid-resistant deck with foot rest, dual deck rails, hand rails, seat switch, back-up alarm, horn and emergency stop. Single control for direction and speed with on/off vibration switch. Tilt steering column with console. Warning lights for battery discharge and parking brake. Work lights (two front and two rear) mounted on ROPS/FOPS. SD-77DX Operating Weight...16,350 lbs. (7415kg) Drum Width...66" (1676mm) Drum Diameter...48" (1219mm) SD-77F Operating Weight...17,780 lbs. (8063kg) Drum Width...66" (1676mm) Drum Diameter...48" (1219mm) SD-122DX Operating Weight lbs. (12002kg) Drum Width...84" (2134mm) Drum Diameter " (1490mm)

165 CRASH TRUCK CRASH TRUCK Hawkins Graves own portable road hazard, directional alert system truck equiped with arrow boards and attenuators. Spring-loaded sign stands / Roll-up Signs Spring-loaded sign stands display 36" and 48" roll-up panels a minimum of 14" off the ground. Patented spring design incorporates antirotational device and positive stops to prevent spring over-stress. Exclusive base, spring and leg design eliminates the need for sandbags and absorbs winds up to 50 mph. Unique kicklock release lever allows easy leg unfolding and adjusting to uneven terrain. Quick lock mast allows for easy panel set-up / take-down. Velcro strap-on mast prevents panel from windmilling when wrapped around vertical fiberglass rib. Durable, lightweight and corrosion-resistant aluminum legs provide longer service life and easier handling without sacrificing strength. Four steel L-shaped brackets reinforce legs to base. Telescoping aluminum legs provide maximum stability

166 GROUND ENGAGEMENT TOOLS Hensley is proud to offer the Dura line, a high quality, low cost alternative to our proprietary products that delivers outstanding performance and value in a wide range of applications. Dura covers all popular Cat, H&L and Hensley Parabolic style adapters and teeth, and includes a complete inventory of the latest design shapes. You can use this ever-expanding line with confidence, knowing that it carries the same warranty coverage as Hensley brand products. Direct Replacement Parts The Hensley line of ground engaging tools for construction and mining also includes a wide selection of Direct Replacement Parts for OEMs. These custom-engineered products can be used with Hensley loaders and excavator buckets, and most other bucket brands. The line features replacements for: Amsco style teeth, pins and rubber plugs Ateco style ripper teeth and fasteners Bofors style teeth Bucyrus-Erie style teeth and fasteners Case/Drott style backhoe and 4-in-1 bucket teeth, adapters and pins Caterpillar teeth, adapters, ripper shanks, edge segments, shank guards, compactor feet, side cutters, end bits, heel plates and fasteners John Deere style teeth and pins Erie-Strayer style clamshell teeth ESCO style teeth, adapters, sidecutters, wear edges and pins Fiat Allis style teeth, adapters and pins Ford style backhoe teeth, adapters and pins Galion style scarifier shanks, tips and pins H&L style teeth, adapters and pins Hendrix style dragline and excavator teeth, and fasteners Komatsu style ripper teeth, excavator teeth, adapters, shank guards and fasteners O&K style teeth and fasteners Page style teeth and fasteners Preco style teeth, ripper shanks and fasteners Wearpact style teeth and fasteners

167 TRENCH SAFETY Lightweight Aluminum Modular trench safety systems such as SAFEGUARD SERIES are PE Certified, store and transport easily. The SafeGuard trench safety systems are design for repair and maintenance work for plumbers, utility companies, general industry and government agencies with underground maintenance departments. ShoreLite Lite Aluminum / Pinless / Modular QUICK / EASY and LIGHT Aluminum design is built strong, light enough to assemble, install and disassemble, on site - by hand. PATENTED PINLESS DESIGN that gives quicker assembly and disassemblies times. Spreader pins are the only pins found on this shield. ADJUSTABLE SPREADERS This shield has a perfect design to be placed inside a narrow ditch to perform repairs. By attaching spreader adjusters users gain the ability to widen this unit an additional 2' - giving more flexibility in the ditch. LIFTING and STORAGE Single 2.5" wide panels come 3' high and stack one-on-top of each other. Lifting lugs are attached to the inside panel for easy rigging. Out of the ditch, a disassembled SSL requires limited storage space. ShoreLite Lite Hydraulic Jacks Simple / Hydraulic / Kits FEATURES and BENEFITS + Heavier-duty high-strength rails + Rotatable finger guards + Simple pin-on extensions + Factory certified repairs + Overnight shipping on stocked parts + Zinc coated pins for easy assembly and more... MINIMAL STORAGE SPACE isn t the only benefit when it comes to hydraulic jacks. These ultra-lite units can be grouped together and transported (safely) in a pickup. What s better is the simple one-man-installation. KITS come with four hydraulic systems, release and removal hooks, and a triple-seal pump bucket. Rails and cylinders ship partially assembled at reduced rates. Hydraulic Jacks TuffGuy Aluminum / Pinless / Modular WHAT S SO TUFF? Robust-modular aluminum sidewalls and your choice of full-length steel or aluminum panel connectors allow this shield to drive with the strength of a steel box and patented pinless design. STEEL PANEL CONNECTORS increase the boxes overall strength and durability, allowing it to go deeper. Designed to feel and work like a steel trenchbox, these connectors hold thick double walled aluminum panels [strong and lightweight], with the bottom spreaders positioned in a prime location to install pipe. ALUMINUM PANEL CONNECTORS aluminum panel connectors allow spreaders to vertically adjust (within depth rating limits). TuffGuy Steel TuffGuy Aluminum V-Panel Flexible / Modular / Aluminum ADJUSTABLE PANELS V-Panels are vertically adjustable to work around pre-existing lines - just lift a panel and lock. The bottom of each panel features a steel knife edge. The top of each panel features a durable pounding pad so you can push each panel in tough dirt without damaging the box. For jobs needing higher pipe clearence raise walers and lock. PINLESS DESIGN other then spreader pins, everything on the V-Panel secerly bolts together. To adjust a panel, unscrew 2 bolts (one for each waler) position and tighten. DROP ONS attach to spreaders. For wider applications add panels to increase drop on width. For narrow applications, remove panels. TELESCOPING SPREADERS for adjustable width -OR- hydraulic struts with external pump bucket to pump out box and shore up the ditch. V-Panel

168 TRENCH SAFETY TITAN BASIC SERIES TRENCH BOXES Standard No Frills affordable trench safety equipment. Simple, affordable, lowers your occasional use cost. The Basic 3 All Steel Trench Box The Basic 3 model is a series of shields for small excavators as well as rubber tired backhoes. Built with high standards to provide reliability in the field. This box is built tough and priced right. An excellent range of sizes is provided for the B3 model. This is a great model for municipalities, plumbers and industrial maintenance crews. Great shield for spot repairs, taps, minor mainline work. Also available the Basic 5 Primary Uses: Occasional Mainline work Production Depth: 14' to 17' Side Wall: 5" TITAN UTILITY Common features P.E. Certified O.S.H.A. Compliant Tabulated Data 1/2" x 3" Cutting Bar Basic 6 Primary Uses: Occasional Mainline work Production Depth: 15' to 17' Side Wall: 6" Kundel goes beyond... Formed Steel Design Continuous Steel Members 12 and 18 High Tapered Knife Edge Internal Pounding Members Reinforced Knife Edge Internal Stacking System Easy Slide Outside Edge One C Soil Depth Rating Vertical Reinforced Pounding Area Reinforced Through Wall Sockets Basic 8 Primary Uses: Occasional Mainline work Production Depth: 12' to 15' Side Wall: 8" Basic 3 Features Tamping Blocks Lifting Lugs Forged Spreader Pins Solid Welded Accessories 12" X 12" Cut Out Stacking Rings Tandum Connectors Lite Sling Drop Ons TITAN RAP-O-ROUND Common features P.E. Certified O.S.H.A. Compliant Tabulated Data 1/2" x 3" Cutting Bar Kundel goes beyond... Formed Steel Design Continuous Steel Members 24 High Tapered Knife Edge Internal Pounding Members Reinforced Knife Edge Internal Stacking System Easy Slide Outside Edge One C Soil Depth Rating Vertical Reinforced Pounding Area Reinforced Through Wall Sockets Titan Utility 3-1/2" Side Walls with Production Depth 8' to 16' or Production Depth 12' to 20' 5" Side Walls with Production Depth 12' to 24' 6-3/4" Side Walls with Production Depth 17' to 30' TITAN BEDDING BOX KEEP YOU LOADER WORKING At the most convenient time... your loader fills the bedding box easy and fast in between its major functions of back filling, clean up and material movement. When your ready to lay pipe... the excavator scoops the bedding material out of the bedding box easily. When needed lays a bed of gravel evenly in the trench eliminating delays and costly labor. The by-product of better production... is safety on the job, by eliminating delays and the loaders putting excess pressure on the trench walls. Features 12" and 18" Knife Edge Tapers 1/2" x 3" Cutting Bar 3" and 5" (X) Strong Pipe Sockets 3/4" and 1-1/2" Thick Pounding Pads 2", 2-1/2" and 3" Solid Stacking Lug Bars FUNCTIONAL DESIGN Walk Bar & Drag Bar EASY movement on the job Reinforced NO BULGE side and long life Easy Fill Design Funnel like design for quick easy bucket fill 9 Cubic Yard Bedding Box Rap-O-Round 3" Side Walls with Production Depth 8' to 16' 5" Side Walls with Production Depth 12' to 30' Features 24" Knife Edge Taper 1/2" x 3" Cutting Bar 3" and 5" (X) Strong Pipe Sockets 3/4" and 1" Thick Pounding Pads 2" and 2-1/2" Solid Stacking Lug Bar