Power Terminals. 316 ept GmbH I Tel. +49 (0) / I Fax +49 (0) / I I
|
|
- Linda Wade
- 5 years ago
- Views:
Transcription
1 E L E C T R O N I C C O N N E C T O R S Power Terminals 316 ept GmbH I Tel. +49 (0) / I Fax +49 (0) / I sales@ept.de I
2 Contents Introduction 318 Overview Power Terminal Pitch 5.08 x 7.62 mm 322 Power Terminal Pitch 5.08 x mm 324 Accessories 326 Notes 327 ept GmbH I Tel. +49 (0) / I Fax +49 (0) / I sales@ept.de I 317
3 Introduction Power Terminals - Power Supply on the PCB Power Supply Connections based on Press-Fit Technology ept power terminals are specially designed to provide power supply connections to circuit boards.the cable is connected using a cable lug that is screwed in place or via a tab terminal (Faston). Key Features: easy connection of power cables individual variants such as angled or offset connectors are possible easy processing via press-in accessories: M4 or M5 screws Applications: Termination Press-fit power supply through screw connection or faston contact Cable-to-Board Application Power 318 ept GmbH I Tel. +49 (0) / I Fax +49 (0) / I sales@ept.de I
4 Overview Type Number of pins Termination Page reference 5.08 x p x / 6 / 8 / 9 p. 324 connection for faston contact connection for screw press-fit zone Tcom press ept GmbH I Tel. +49 (0) / I Fax +49 (0) / I sales@ept.de I 319
5 Termination Operating temperature -55 C to +125 C Contact material Copper alloy Contact surface 2-8 μm Sn Mechanical Insertion force Type 150 N/Pin Retention force min. 60 N/Pin Operational current * IEC : C: 45 A 70 C: 30 A 100 C: 25 A Thread M4 / M5 M4 Max. thightening or torque 1.3 Nm Packaging Bulk Environment RoHS compliant * The operational current is determined by the printed circuit board, the cable diameter and the cable lug used. 320 ept GmbH I Tel. +49 (0) / I Fax +49 (0) / I sales@ept.de I
6 Plated through-hole according to IEC new board surfaces. A PCB thickness min. 2.9 mm min. 2.9 mm B Plated hole Ø / mm Ø / mm C Drill hole 1.6 ± mm 1.75 ± mm D Cu plating min. 25 μm min. 25 μm E imm. Sn plating max. 1.5 μm max. 1.5 μm F Annular ring min. 0.1 mm min. 0.1 mm A PCB thickness min. 2.9 mm min. 2.9 mm B Plated hole Ø / mm Ø / mm C Drill hole 1.6 ± mm 1.75 ± mm D Cu plating min. 25 μm min. 25 μm E Ni, Au plating μm Au over μm Ni μm Au over μm Ni F Annular ring min. 0.1 mm min. 0.1 mm A PCB thickness min. 2.9 mm min. 2.9 mm B Plated hole Ø / mm Ø / mm C Drill hole 1.6 ± mm 1.75 ± mm D Cu plating min. 25 μm min. 25 μm E HAL Sn 5 15 μm 5 15 μm F Annular ring min. 0.1 mm min. 0.1 mm ept GmbH I Tel. +49 (0) / I Fax +49 (0) / I sales@ept.de I 321
7 5.08 x 7.62 mm Type: Termination: Pitch: Operational current: Packaging: Approval: On request 90 angled with 1 terminal On request angled with 1 or 2 terminals On request straight with 1 or 2 terminals Dimensions in mm For detailed drawings visit Accessories Application: screwed connection or faston contact 322 ept GmbH I Tel. +49 (0) / I Fax +49 (0) / I sales@ept.de I
8 5.08 x 7.62 mm Press-fit - Thread M4 Pins Contact arrangement Part number / /1 On request with 1 or 2 terminals angled with 1 or 2 terminals straight with 1 terminal 90 Press-fit - Thread M5 Pins Contact arrangement Part number / /1 On request Philips screw with 1 or 2 terminals angled with 1 or 2 terminals straight with 1 terminal 90 ept GmbH I Tel. +49 (0) / I Fax +49 (0) / I sales@ept.de I 323
9 5.08 x mm Type: Termination: Pitch: Operational current: Packaging: Approval: Dimensions in mm For detailed drawings visit Accessories Application: screwed connection or faston contact 324 ept GmbH I Tel. +49 (0) / I Fax +49 (0) / I sales@ept.de I
10 5.08 x mm Press-fit - Thread M ept GmbH I Tel. +49 (0) / I Fax +49 (0) / I sales@ept.de I 325
11 Accessories M4 M5 Socket cap screw DIN Philips screw Washer Lock nut On request Philips screw in M5 326 ept GmbH I Tel. +49 (0) / I Fax +49 (0) / I sales@ept.de I
SEK Solder board connectors
Solder board connectors Technical characteristics 6, 10, 14, 16, 20, 26, 30*, 34, 40, 50, 60, 64 Contact arrangement straight, angled Contact length 2.9 mm, 4.5 mm Approvals IEC 603-13 DIN EN 60 603-13
More informationREDCUBE The Impressive Press-Fit Technology and more
REDCUBE The Impressive Press-Fit Technology and more High amperage solution Superior mechanical retention these are. Terminals for Power! AGENDA Press-fit technology What is it? Advantages Installation
More informationCrimpmate Range pitch 5.00
Contents pitch. pitch. pitch. Male and female connectors with solder connection. Male and female connectors with crimp connection. Crimp contacts..1 pitch. RSV 1. S Derating curve RSV1. S SN Rectangular
More informationSEMITOP2,3,4 Press-Fit
Mounting Instruction SEMITOP2,3,4 Press-Fit Revision: 03 Issue date: 2017-08-28 Prepared by: Roberto Agostini Approved by: Werner Obermaier Keyword: SEMITOP, mounting instructions, one screw mounting,
More informationData sheet. Connection cable M12 jack straight - free line end 8-pole, X-coded 0.5 m. Illustrations P/N 142M2X20005 EAN
Page 1/6 Illustrations Dimensional drawing Cut-out See enlarged drawings at the end of document Product specification shielded M12 Ethernet connection cable Cat.6A, x-coded, 8-pole side 1: M12-jack, straight
More informationCMC Hybrid Connectors Standard and Power Versions
CMC hybrid connectors and mating headers provide sealed, high-density, modular and cost-effective wire-to-board and wire-to-wire connection systems for heavy-duty powertrain and body-electronics applications
More informationDirectory chapter 03 DIN Power (to 15 A) Types H, H 3, MH , MH Technical characteristics type H
Directory chapter 03 () Types H, H 3, MH 24 + 7, MH 21 + 5 Page Technical characteristics type H.................................... 03.10 Type H connectors.................... 03.11 Type H 3 connectors..................
More informationRI-80 SMDH Series Housed Dry Reed Switch
formerly RI-80 SMDH Series Housed Dry Reed Switch RI-80 SMDH Series Ultra-micro dry-reed switch hermetically sealed in a gas-filled glass envelope. Single-pole, single-throw (SPST) type, having normally
More informationCMC Hybrid Connectors Standard and Power Versions
CMC hybrid connectors and mating headers provide sealed, high-density, modular and cost-effective wire-to-board and wire-to-wire connection systems for heavy-duty powertrain and body-electronics applications
More information06. har-mik INTERFACE CONNECTORS
. INTERFACE CONNECTORS Miniature D connectors are a must in various cableto-board applications where space saving and high data transfer rates are required. For the purposes of miniaturization and speed,
More informationFeatures/Benefits. Typical Applications
Features/Benefits Compliant with ESA/ESCC specification Solderable PCB terminations Available with or without brackets High density layouts Typical Applications Space equipments Avionics / Military Industrials
More informationMDual Power Connector
MDual Power Connector Overview Utilizing the efficient high-current design of the PowerBud contact technology, the MDual power connectors carry high power in a small package and features self-aligning
More information- 1 - General ordering data Order No
General ordering data Order No. 1748280000 Part designation B2L 3.5/28 F SN SW Version EAN 4032248156535 Qty. 20 pc(s). PCB plug-in connector, Female connectors, Tension clamp connection, Clamping range,
More informationData sheet. E-DAT Industry RJ45 field plug PROFINET. Illustrations P/N PI EAN Product specification. Page 1/
Page 1/7 Illustrations Dimensional drawing Wiring See enlarged drawings at the end of document Product specification multi-port Cat.5 plug to be assembled in the field 100 MBit suitable according to IEEE
More informationData sheet. Connection line M12 4-pole D-coded 1.0 m. Illustrations P/N 142M1D11010 EAN Product specification. Page 1/
Page 1/6 Illustrations Dimensional drawing Wiring See enlarged drawings at the end of document Product specification shielded M12 Ethernet connection line Cat.5e, 4-pole, D-coded to IEC 61076-2-101 straight
More informationTubular compression cable lugs 6 35 mm 2, DIN material: Cu according to DIN EN surface: tin plated or optionally uncoated
Tubular compression cable lugs 6 35, DIN 6235 material: Cu according to DIN EN 13600 surface: or optionally * not standardized, tube measurements in accordance with DIN 6235 6 5 1021 5 3,7 5,5 5,3 8,5
More informationv1.1 DP3 Series Input/Output Connector Thunderbolt Technology Compatible Connector Training Module Copyright 2013 JAE Electronics, Inc.
v1.1 DP3 Series Input/Output Connector Thunderbolt Technology Compatible Connector Training Module Application Examples Laptops, Desktops, Ultrabooks Audio/ Video editing equipment Display devices Adapter/
More informationData sheet E-DAT Industry patch cord V6 IP67 - RJ m
Illustrations Dimensional drawing Page 1/6 See enlarged drawings at the end of document Product specification fully shielded Cat.6 patch cable AWG 26/7 S/FTP with PUR cable sheath 1 x RJ45 and 1 x RJ45-IP67-V6
More informationData sheet Connection line M12-RJ45 4-pole D-coded AWG m
Page 1/5 Illustrations Dimensional drawing See enlarged drawings at the end of document Product specification shielded M12 to RJ45 Ethernet connection line Cat.5, 4-pole, D-coded (IEC 61076-2-101) M12
More informationBourdon tube pressure gauge with switch contacts Models PGS21.1x0, industrial series
Mechatronic pressure measurement Bourdon tube pressure gauge with switch contacts Models PGS21.1x0, industrial series WIKA data sheet PV 22.01 Applications Control and regulation of industrial processes
More informationAlarm contacts for pressure gauges and thermometers
Alarm s for pressure gauges and thermometers Electrical alarm s with magnetic snap-action s or sliding s Operating principle: Magnetic snap-action or sliding s in pressure gauges resp. thermometers are
More informationAccessories Miniature Relay PT
Accessories Miniature Relay PT Easy replacement of relays on a densely packed DIN rail Socket with logical arrangement of control/load terminals High quality rising clamp terminals Captive combination
More informationData sheet Connection line M12-RJ45 4-pole D-coded AWG m
Page 1/6 Illustrations Dimensional drawing Wiring See enlarged drawings at the end of document Product specification shielded M12 to RJ45 Ethernet connection line Cat.5, 4-pole, D-coded (IEC 61076-2-101)
More informationData sheet E-DAT Industry RJ45 field plug black Cat.6 Class E A
Illustrations Dimensional drawing Page 1/7 See enlarged drawings at the end of document Product specification multi-port Cat.6 class E A plug to be assembled in the field compliance with class E A to ISO/IEC
More informationDirectory chapter 01
Directory chapter 01 Miniature D connectors, 1.27 mm pitch Page I/O connectors................................................. 01.02 Pin and socket Technical characteristics........................................
More informationData sheet... OMNIMATE Signal - series LM LM 5.00/04/90 3.5SN OR BX
PCB terminal with proven clamping yoke connection at 5.00 and 5.08 mm pitch. Conductor outlet direction 90, 135 and 180. Suitable for conductor cross-sections up to 2.5 mm². 0.13-2.50 mm² (IEC) / 26-14
More informationData sheet Connection line M12 plug straight - RJ45 plug straight 8-pole, X-coded 5.0 m
Page 1/5 Illustrations Dimensional drawing See enlarged drawings at the end of document Product specification shielded M12-plug to RJ45-plug connection line Cat.6, 8-pole M12-connector, X-coded, straight
More informationMiniature General Purpose Relay HY
www.industrialcontroldirect.com Tel: --00 Fax: -9-09 info@industrialcontroldirect.com Miniature General Purpose Relay HY General purpose, amp Plug in Power Relay, available in PCO, PCO and PCO Arc barriers
More informationPCB plug-in connectors
Contents CB plug-in connectors.16 mm pitch.16 mm pitch Male connectors with solder connection.2 Socket connectors with clamping yoke connection.8.1 Male connectors with solder connection SU.16H/9 Derating
More informationContactors. CH1130/02 Series Single pole high-voltage contactor up to 3 kv Catalogue C170.en. Connect - Contact - Control
Connect - Contact - Control 3 Contactors CH1130/02 Series Single pole high-voltage contactor up to 3 kv Catalogue C170.en More information at: schaltbau-gmbh.com 42 CH1130/02 Single pole high-voltage contactor
More informationEye Of SOLDERLESS INTERCONNECT TECHNOLOGY GUIDELINE. the Needle
EON Pressfit Eye Of SOLDERLESS INTERCONNECT TECHNOLOGY the Needle GUIDELINE ME DOCPAGEAPAGE.indd 2 22/6/217 11:14:49 SOLDERLESS INTERCONNECT TECHNOLOGY EON Pressfit Eye Of the Needle As a connection, Pressfit
More informationConnectors according to DIN /IEC
Connetors ording to DIN 41612 /IEC 60603-2 26 ept GmH I Tel. +49 (0) 88 61/25 01 0 I Fx +49 (0) 88 61/55 07 I E-Mil sles@ept.de I www.ept.de Contents Introdution 28 Overview 30 The Stndrd 32 Derting Digrms
More informationSpring Cage Miniature Terminal Blocks FK-MPT 0,5/ -3,5
Spring Cage Miniature Terminal Blocks FK-MPT 0,5/ -3,5 The mini print terminals, FK-MPT 0,5 and FK-MPT 0,5 -H provide one double connection per position across a 3.5 mm pitch. This space-saving arrangement
More informationConnector for Internal Serial Transmission. FI-R Series
COMPONENTS PRODUCT INFORMATION NEW Connector for Internal Serial Transmission FI-R CONNECTOR MB-0153-2 October 2008 RoHS Compliant High-speed serial transmission such as LVDS, TMDS (HDMI), and PCI Express
More information92-Position LGA/LGA PCBeam Connector for
92-Position LGA/LGA PCBeam Connector for Neoconix P/N: BBX0092CMMHFAU00 FEATURES High density 0.7424mm area-array pitch Low profile, 1.55 mm mated height PCBeam high reliability LGA spring contacts Bifurcated
More informationNH DIN Dual Indication Fuse Links
Class gg/gl, 400Vac, 2 to 630 Amps, Sizes 000 to 3 Standards/Approvals IEC 60269, VDE 0636, DIN 43620 Part 1 and 3 Description A square bodied range of industrial fuse links for a wide variety of applications.
More information1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
More informationD-Sub Connectors. Catalog E /09 Edition 3
www.erni.com Catalog E 074573 11/09 Edition 3 www.erni.com www.erni.com Catalog E 074573 11/09 Edition 3 www.erni.com Table of Contents General..............................................................................................2
More informationAC SERIES XLR PCB CHASSIS MOUNT CONNECTORS
A AND B TYPE FLANGE AC SERIES XLR PCB CHASSIS MOUNT CONNECTORS The AC series, A and B type XLR chassis receptacles have been designed and manufactured with the Original Equipment Manufacturers (OEM) needs
More informationSMB LOCK Introduction Characteristics Straight plugs Right angle plugs SMB limited detent (SMB-A) Receptacles...
CONTENTS PAGE SMB Introduction... 4 General... 5 Finder guide... 6 Interface... 7 Characteristics...8-9 Straight plugs...0- Right angle plugs...- Jacks... 3 Bulkhead jacks...4-5 Receptacles...6-7 PCB receptacles...
More informationAMPHENOL PCD SHENZHEN. EXCEL MATE CC (Charging Coupler)
AMPHENOL PCD SHENZHEN EXCEL MATE CC (Charging Coupler) www.amphenolpcd.com.cn CONTENTS IEC STANDARD - TERMS AND DEFINITIONS... 3 EXCEL MATE CC - Technical characteristics.......... 4 INSERT ARRANGEMENTS...
More informationC&K 1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
More informationAMPHENOL PCD SHENZHEN. EXCEL MATE CC (Charging Coupler)
AMPHENOL PCD SHENZHEN EXCEL MATE CC (Charging Coupler) www.amphenolpcd.com.cn CONTENTS IEC STANDARD - TERMS AND DEFINITIONS... 3 EXCEL MATE CC - Technical characteristics.......... 4 INSERT ARRANGEMENTS...
More informationDatasheet. System pitch mm (0.400 inch) - SU/BU BUZ 10.16HP/02/180F AG BK BX
High-performance female connector with the tried-and-tested, guaranteed zero-maintenance, Weidmüller steel clamping yoke. Side-by-side mounting without losing any poles or with patented multifunction flange
More informationFrequency 10 to 55 Hz, Amplitude 0.75mm Frequency 10 to 55 Hz, Amplitude 0.75mm. Frequency 10 to 55 Hz, Amplitude 0.75mm
Power Relays RL Series PRODUCT DESCRIPTION Quick Connect Flange Mount SPECIFICATIONS Number of poles pole 2 poles Contact Configuration X (SPST, double make) 2X (DPST, double make) Contact material Ag
More informationData sheet E-DAT Industry RJ45 coupler insert Cat.6 Class E
Illustrations Dimensional drawing Page 1/6 See enlarged drawings at the end of document Product specification Cat.6 class E RJ45 jack for mounting in IP67 flange housings of variants 1, 4, 5 and 14 use
More informationPRODUCT SPECIFICATION STANDARD TIMER CONNECTOR, RAST 5mm, 2-12 POSITIONS
PRODUCT SPECIFICATION STANDARD TIMER CONNECTOR, RAST 5mm, 212 POSITIONS 1. GENERAL: 1.2 Purpose and Scope: This specification describes the structure, properties, design types as well as quality requirements
More informationAdapting Press-Fit Connection Technology for Electronic Modules in Harsh Environments.
Adapting Press-Fit Connection Technology for Electronic Modules in Harsh Environments. By Joseph Lynch Director of Advanced Product Engineering Interplex Industries Inc, USA. Andy Longford Consultant PandA
More informationPeel-off & Pull-out forces for WECO SMD-connectors State:
Peel-off & Pull-out forces for WECO SMD-connectors State: 02.2015 General note: The pull-out or peel-off forces of the solder joint are depending also on the quality of the solder joint and the PCB as
More informationTechnical attributes
Technical attributes Standards adapted to DIN VDE 0281 Conductor material Cu, bare Conductor type flexible Conductor standard IEC 60228 Conductor category 5 Core insulation Core s black, number-coded,
More informationEmbedded Bud Connector
Embedded Bud Connector Overview Utilizing the efficient high-current design of the PowerBud contact technology, the EBC (Embedded Bud Connector) carries high power in a small package and is specifically
More informationMHD Series. High Density Mixed Signal, Power and Coaxial Connectors. Technical Characteristics
High ensity Mixed Signal, Power and Coaxial Connectors Ruggedized metal shell PCB connector, with shrouded plug for pin protection Signal and HE 80 cavities for power and coaxial contacts Male plug : Straight
More informationCDM-K27W, CDM-J97W, CDM-K29W, CDM-K06W, CDM-K33W, CDM-L03
CDM-K27W, CDM-J97W, CDM-K29W, CDM-K06W, CDM-K33W, CDM-L03 Connectors FEATURES 1. Applicable to automotive antennas for radiofrequency signal transmission. 2. Include a die casting body (shell) that can
More informationRoHS 2002/95/EC GREEN ELECTRONICS PSQ. Terminal Blocks and Connectors for Printed Circuit Boards ISO 9001 ISO BS OHSAS 18001:2007
RoHS 2002/95/EC e3 GREEN ELECTRONICS Terminal Blocks and Connectors for Printed Circuit Boards ISO 9001 ISO 14001 BS OHSAS 18001:2007 SAURO ELECTRONIC CONNECTORS WWW.SAURO.NET Standard PRODUCTS PLURIMA
More informationFRNR A 250V TD Class RK5 Dual Elem Fuse-Fusetron
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 FRNR225 225A 250V TD Class RK5 Dual Elem Fuse-Fusetron Number Manufacturer Description Weight per unit Product Category
More informationMore than safety. Product Overview. Automation
More than safety. Product Overview Automation Automation at a glance Ident Systems CIS3 CIS3A CIS3A -Mini Read system Read/write system Read system Read/write system Read system Read/write system Housing
More informationProduct specification
Product specification Measuring range of 4 mm Features Non-contacting displacement measurement based on the eddy-current principle System length: 5 m or 10 m with ATEX approval Temperature range: -50 C
More informationSPRING - LOADED CONNECTORS
SPRING - LOADED CONNECTORS SPRING LOADED CONNECTORS QUICK SELECTOR CHART SPRING-LOADED CONNECTORS AND PAD CONNECTORS GRID 1.25 mm 2 mm 2.54 mm SINGLE ROW SINGLE ROW DOUBLE ROW SINGLE ROW DOUBLE ROW SLC
More informationConnector for Internal Serial Transmission FI-R Series
COMPONENTS PRODUCT INFORMATION NEW Connector for Internal Serial Transmission FI-R CONNECTOR MB-0153-4 June 2013 RoHS Compliant High-speed serial transmission such as LVDS, TMDS (HDMI), and PCI Express
More informationIsolating transformer DS0107. Three-phase isolating transformers for the supply of three-phase loads in medical locations
Three-phase isolating transformers for the supply of three-phase loads in medical locations DS0107_D00105_00_D_XXEN/05.2015 Three-phase isolating transformers for the supply of three-phase loads in medical
More informationRoHS 2011/65/EU ISO 9001 ISO BS OHSAS 18001:2007 GREEN ELECTRONICS MSM. Terminal Blocks
RoHS 2011/65/EU e3 GREEN ELECTRONICS ISO 9001 ISO 14001 BS OHSAS 18001:2007 MSM Terminal Blocks Functional characteristics Dimensional class: medium RoHS 2011/65/EU Standard colour: green Height: 15.2
More informationSingle-phase CT current transformers Cat. Nos :
Index Pages 1. Description - Use... 2 2. Range...2 3. Overall dimensions...2 4. Preparation - Connection... 3 5. General characteristics...5 6. Compliance and approvals...7 1/6 1. DESCRIPTION - USE Closed-type
More informationIsolating transformer ES710
Single-phase isolating transformers for the design of medical IT systems Also available as energy-efficient Green Line (GL) edition ES710_D00109_03_D_XXEN/10.2016 Single-phase isolating transformers for
More information5 mm contact pin pitch PCB or 95 series sockets
1. = 12.4 1. = 12.4 44 Series - Miniature PCB relays 6-10 A Features 44.2 44.62 2 Pole relay range 44.2-2 Pole 6 A ( mm pin pitch) 44.62-2 Pole 10 A ( mm pin pitch) PCB mount - direct or via PCB socket
More informationRadial Aluminium Electrolytic Capacitors 105 C
Radial Aluminium Electrolytic Capacitors 105 C Standard, miniaturized, Endurance 1.000h to 2.500h at 105 C Rated voltage range: 6,3V to 100V, Rated capacitance range: 0,47µF to 12.000µF range: Ø 5,5 x
More informationV REG.-Nr. 6106, Z E SCHRACK. Accessories Industrial Power Relay RT. General Purpose Relays. pinnings 3.5mm / 5mm; relay height 15.
Accessories Industrial Power Relay RT n For Industrial Power Relay RT pinnings 3.5mm / 5mm; relay height 15.7 mm n New retainer clip with ejection function n Easy replacement of relays on a densely packed
More informationSERIES MHV (H4) HIGH VOLTAGE CONNECTORS
SERIES MHV (H4) HIGH VOLTAGE CONNECTORS DESCRIPTION CONTENTS PAGE HUBER+SUHNER MHV connectors are coaxial miniature high voltage (MHV = Miniature High Voltage) connectors with 5 kv rms test voltage (mated
More informationAccessories Miniature Relay PT (Continued)
Accessories Miniature Relay PT Easy replacement of relays on a densely packed DIN rail No reduction of protection class or creepage/clearance with plastic retainer Plug-in indicator- and protection modules
More informationCompact design suitable for use in reduced mounting space. CONTROL > Directly operated solenoid valves Series PN GENERAL DATA
> Directly operated solenoid valves Series PN Directly operated solenoid valves Series PN 3/-way Normally Closed (NC). The solenoid valves can be mounted on a single base (with M5 ports) as well as on
More informationD-Subminiature EMI/RFI Shielding Interconnection Systems
Amphenol Amphenol PCD Shenzhen D-Subminiature EMI/RFI Shielding Interconnection Systems www.amphenolpcd.com.cn Product profile RR-HR D-Sub connectors - stamped and formed contacts REAR RELEASE CRIMP CONNECTORS
More informationThreaded fittings. Festo core product range Covers 80% of your automation tasks
q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qgenerally ready
More informationGeneral characteristics and technical data Series MCS
MOD M MC MCS VP 100 S Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and
More informationX-BT-ER stainless steel threaded studs for electrical connections
stainless steel threaded studs for electrical connections Product data X-BT-ER Dimensions 1 2 3 1 7 2 M8 Ø 4. [0.177"] 1 M10/ W10 3 Ø 12 [0.472"] 24 [0.94"] 4 4 31.3 [1.232"] [0.18"] 7 M6/ W6 3 Ø 4. [0.177"]
More informationContactors. C110B/80, C110B/120 C110B/200, C110B/300 Single pole DC NO contactors for industrial trucks Catalogue B71.en
Contactors C110B/80, C110B/120 C110B/200, C110B/00 Single pole DC NO contactors for industrial trucks Catalogue B71.en 42 C110B Series DC NO contactors for battery voltages C110B Series contactors are
More informationSquare D General Purpose Relays
Square D General Purpose Relays Class 0R plug-in relays 0RS (SPDT) 0RS (DPDT) 0RS3 (3PDT) 0RS (PDT) Catalog 0 Contents Class 0R plug-in relays bbspecifications....................................................
More informationAPPLICATION NOTE. Mounting instructions for EasyPIM 750 and EasyPACK750 Modules with screw clamps
Date: 2003-08-12 APPLICATION NOTE Page 1 of 9 Mounting instructions for EasyPIM 750 and EasyPACK750 Modules with screw clamps 1. General information The mounting instructions outlined below are recommended
More informationTN1250 Technical note
Technical note Press-fit ACEPACK power modules mounting instructions Introduction ST introduces the ACEPACK Power Module family, designed for easy mounting and reliable performance in rugged applications.
More information4000 Series Buccaneer
Sealed to IP66 IP6 and IP69K when mated IP6 rating tested at 1.054kg/sq cm (15lb/sq in) m depth for 2 weeks, & pole configuration Power ratings up to 1A, 600V Cable range from to 7mm Diameter over coupling
More informationAmphenol. eries SJT. Series SJT. VG 96912, Series 1 PAN JN 1003
Amphenol eries SJT Series SJT VG 96912, Series 1 PAN 6433-2 JN 1003 Ordering information Ordering example: SJT G 06 RT 14-35 P A 014 Series (p. 9, 15, 18) SJT Scoop proof (100% scoop-proof) Junior (Miniature
More informationRoHS 2011/65/EU ISO 9001 ISO BS OHSAS 18001:2007 GREEN ELECTRONICS MSP. Terminal Blocks
RoHS 2011/65/EU e3 GREEN ELECTRONICS ISO 9001 ISO 14001 BS OHSAS 18001:2007 MSP Terminal Blocks Functional characteristics Dimensional class: high RoHS 2011/65/EU Standard colour: green Height: 0 21.5
More informationBNC75 Receptacle Connector for Broadcast
BNC Receptacle Connector for Broadcast BNC Series for 12G-SDI Characteristic Impedance Ω Lock Type Bayonet OUTLINE BNC series for broadcasting equipment is a high performance Ω connector which is compliant
More informationCSF - CSM CONNECTORS. Functional characteristics. RoHS 2011/65/EU. Brief description. Dimensional class: low. Standard colour: green
- CSM Functional characteristics Dimensional class: low 0 RoHS 2011/65/EU Standard colour: green Dimensions: 14 x 11.5 mm (.551 x.453 in) 10 20 30 mm ½ 1 in Max approved wire size: solid: 2.5 mm 2 (IMQ);
More informationProduct features & Overview. N1 - N4 A Rotary and part-turn actuators
Product features & Overview N1 - Rotary and part-turn actuators 20 N1 - Rotary and part-turn actuators Rotary and part-turn actuators Product features Wide torque range Wide selection of output shafts
More informationPre-assembled plug connectors Product range overview
Pre-assembled plug s Product range overview Function Electrical connection Type Cable Version Page/Internet Round plug M8, 3-pin SEA-3GS-M8-S Pg7 Straight/ SEA-GS-M8 Pg7 Straight/ solder lug M12, -pin
More informationCastellated/Hex Nut. Insert Retaining Ring. Contact Insert
Castellated/Hex Nut Seals Snap-on Connection for Flexible Straps & Covers Insert Retaining Ring Contact Insert Sealing Cap Clip Gland Cage Insert Retaining Ring Contact Insert Locking Ring Flex Body Moulding
More informationNEUMO BioControl Model
Accessories NEUMO Model 910.60 WIKA Data Sheet AC 09.14 Applications Bio and pharmaceutical industry Sanitary applications Food industry Special Features NEUMO No dead space Hygienic design Materials and
More information30C30 definite purpose contactor
30C 30FLA Definite Purpose Contactor Robust 1-4 Pole Contactor Arc Covers as standard Industry Standard Mounting RoHS Compliant UL File No: E61703 Contact Data Table 1 Arrangements: 1 Form X (SPST-NO-DM)
More informationPSM PLURIMA. Functional characteristics. Brief description. RoHS 2002/95/EC. Dimensional class: medium. Standard colour: green
SAURO ELECTRONIC CONNECTORS WWW.SAURO.NET Standard PRODUCTS PLURIMA Functional characteristics Dimensional class: medium Standard colour: green Heights: 35.6 mm, 25.2 mm, 14.8 mm (1.40 in,.99 in,.58 in)
More informationIn-Rail-Bus Bus system in DIN-rail
In-Rail-Bus Bus system in DIN-rail PB (mounted in an enclosure) M3928_a Overview Overview spring contact block for In-Rail-Bus Designation KO4303-153 KS4460-12 KO4303-400 KO4303-401 Pole 5 5 5 8 Spring-contact
More informationHan-Power Energy Bus Components
HARTING Electric Han-Power Energy Bus Components People Power Partnership Han Data Sheet 0080-7 Han-Power T Han-Power T Part-Number Drawing Dimensions in mm 09 12 008 4701 Cable gland please order separately
More informationA type Ejectors (in line) Dimensions and weights
A type Ejectors (in line) Dimensions and weights Our A type ejectors have the best efficiency and are therefore our most commonly sold type. The motive water is coming from the side and suction is created
More informationCOMMERCIAL INFORMATION TECHNICAL INFORMATION BA511*33
BA511*33 COMMERCIAL INFORMATION Type designation specification for ordering...146 (design and circuit breaker and switch-disconnector accessories selection, circuit breaker rated current selection) Connecting
More informationHARTING. Interface Connectors. People Power Partnership
11 4 HARTING Interface Connectors People Power Partnership People Power Partnership Quality Connections Worldwide HARTING was founded in 1945 by the family that still owns the company. Today, HARTING employs
More informationFor the plastics machinery industry Manifold thermocouple Model TC47-MT
Electrical temperature measurement For the plastics machinery industry Manifold Model TC47-MT WIKA data sheet TE 67.21 Applications Plastics and rubber industry Hot runner manifolds for injection mould
More informationball valve soft seated maintenance-free with floating ball
Data sheet 8220.1/8 TOPI 210 ball valve soft seated maintenance-free with floating ball The sealing variants are approved in accordance with the german clear air regulations TA-Luft 2002 Flanged ends PN
More informationThermal-Magnetic Circuit Breaker 201/-WA
Thermal-Magnetic Circuit Breaker 0/-WA Description Single pole thermal-magnetic circuit breaker with tease-free, trip-free, snap action mechanism and two button operation (M-type TM CBE to EN 60934). Featuring
More informationTechnical Data, Dimensioning, Mounting
6 Bosch Rexroth AG R310EN 3105 (2005.06) and Shafts Technical Data, Dimensioning, Mounting Speed v max = 5 m/s Acceleration a max = 150 m/s 2 Operating temperature 20 C to +100 C Dimensioning The load
More informationHan K 3/0, K 3/2 / Han HC Modular. Contents Technical characteristics Han K 3/0, Han K 3/ Inserts Han K 3/0, Han K 3/
Han K 3/0, K 3/2 / Han HC Contents Page Technical characteristics Han K 3/0, Han K 3/2... 14.02 Inserts Han K 3/0, Han K 3/2... 14.03 Hoods/Housings Han 24 HPR for Han K 3/0, Han K 3/2... 14.04 Technical
More informationS840, S845, S846 Series Single-break changeover, NC or NO contacts, positive opening operation and wiping action Catalogue D40.en
Snap-action switches S80, S85, S86 Series Single-break changeover, NC or NO contacts, positive opening operation and wiping action Catalogue D0.en Snap-action switches, S80, S85, S86 Series Single-break
More informationSecurity device Non return valve
Non return valve Design The DEFINOX non-return valve is made of 316L stainless steel with a surface finish of Ra = 0.8 µm. To disassemble, a fitting is required upstream. This valve uses a guided plug
More information