More than safety. Product Overview. Automation

Transcription

1 More than safety. Product Overview Automation

2 Automation at a glance Ident Systems CIS3 CIS3A CIS3A -Mini Read system Read/write system Read system Read/write system Read system Read/write system Housing material Head Evaluation unit Plastic Plastic Plastic Plastic General Housing dimensions Type of installation Head Evaluation unit Head Evaluation unit M 30 x 80 mm 40 x 40 x 49 mm 0 to +50 C 0 to +55 C M 30 x 80 mm 40 x 40 x 49 mm 0 to +50 C 0 to +55 C M 2 x 39 mm M 2 x 39 mm 4 x 99 x 22,m 4 x 99 x 22,m 0 to +50 C 0 to +55 C DIN rail mounting DIN rail mounting Degree of protection, Head IP 65 IP 65 IP 65 IP 65 max. acc. to IEC Evaluation unit IP 20 IP 20 Operating voltage U B 24 V 24 V 24 V 24 V 24 V 24 V Current consumption (without load current) I B Output A, B,C,D,strobe = min. voltage A, B,C,D,strobe =0 max. Input Skip = min. 00 ma 20 ma U B - 3 V 5 V 00 ma 20 ma U B - 3 V 5 V 00 ma 00 ma U B - 3 V 5 V voltage Skip = 0 max. Data transfer Interface Transfer protocol Data transfer rate 4-Bit parallel Serial RS 232 / V R 9,6 kbaud 4-Bit parallel serial RS 232 / V R 9,6 kbaud serial RS 232/V.24 4-Bit parallel RS R 9,6 kbaud 28,8 kbaud Design Housing dimensions Ø 6 x 8 mm 35 x 6 x 8 mm 50 x 50 x 20 mm Ø 0 x 4 mm Approach Direction-dependent Direction-independent Direction-independent Data carrier Type of installation Read distance, max. Relative speed Data carrier/read station Cube-shaped: screws, with metal Cylindrical: bonding, fl ush in metal 8 mm 40 mm/s Static Screws, with metal 28 mm 230 mm/s Static Bonding, fl ush in metal m Static Storage capacity 6 bytes 6 bytes 4 bytes 6 bytes -40 to +85 C -20 to +85 C Degree of protection Number of write cycles, min Number of read cycles Not limited Not limited Not limited Inductive ident systems are used for the non-contact identifi cation of products such as workpiece carriers or tools. The robust data carriers without batteries are, for example, programmed with a sequential number. Data carriers can be purchased programmed or you can program them yourself using a head with serial interface, or a portable hand-held terminal. The information is transferred via read-only heads directly to the inputs/ outputs on a control system using a parallel data interface. Integration is therefore straightforward and low-cost. Detailed information in catalog Identsystem CIS available available on request not available All given data refer to the respective minimum or maximum values for the entire series.

3 Automation at a glance Precision Single Limit Switches NG N0 SN0 NA N Approvals Special features/ specifi c advantages Acc. to EN 5004 down to -40 C down to - 40 C Acc. to DIN down to - 40 C Switching element Contact elements, max. Switching current, max. Switching current min. (at 24 V) Switching voltage, max. Mechanical life, max. Operating point accuracy 4 0 A ma 30 x0 6 4 A 0 ma x0 7 ± A 0 ma x0 7 ± A A 30 x A 20 ma 30 x0 6 Housing material Housing dimensions, min. (H x W x D) 00 x40x42mm 40 x40x20mm 45 x50x22mm 60 x76x28mm 62 x65x30mm Plunger spacing Environment Number Degree of protection, max., acc. to IEC to +25 C LED indicator Approach/actuating direction Approach speed, max. 300 m/min 80 m/min 80 m/min Cable entry cable (pre-assembled) Plug connector M 20x.5 M 2x.5 2 or M2, 4-pin + PE M 6x.5 2 or M2, 4-pin + PE 2 x M 6x.5 M2, 4-pin + PE 3 x M 20x.5 Accessories Plunger types Detailed information in catalog acc. to EN 5004 available available on request not available All given data refer to the respective minimum or maximum values for the entire series.

4 Mechanical Single Hole Fixing Limit Switches EGT2 EGT/4 EGM2 EGTM2 EGT EGT2 EGT4 up to +20 C down to -30 C A 0.6 A 0.6 A 0.6 A 2 A 2 A ma 0 ma 0 ma 0 ma 0 ma 0 ma 30 x0 6 x0 6 x0 6 x0 6 3 x0 6 5 x0 5 ± 0.0 ± 0.0 ± 0.0 ± 0.0 ± 0.0 ± 0.0 Stainless steel Stainless steel Brass, nickel-plated Brass, nickel-plated Steel/brass Brass, nickel-plated 6 x Ø 2.6mm 40 x Ø 4mm 74 x Ø 2mm 65 x Ø 2mm 88 x Ø 24mm 5 x Ø 8mm -25 to +85 C -5 to +60 C IP 68 IP 65 8 m/min 8 m/min 8 m/min 8 m/min 0 m/min 0 m/min M 2, 4-pin + PE M 2, 4-pin M 2, 4-pin M 2, 4-pin M 2, 4-pin + PE (with longer plunger and PU scraper on request)

5 Precision Multiple Limit Switches RGBF SN/SB GSBF RGBF AM SN AM RGCS Acc. to DIN Upright housing, small flange, down to -25 C Upright housing Acc. to DIN with exterior diaphragm With exterior diaphragm Acc. to DIN with replaceable plunger guide 0 A 0 A 0 A 0 A 0 A 0 A 0 ma 0 ma 0 ma 0 ma 0 ma 0 ma 30 x x x x x x0 6 2/6 8/2/6 8/2/ to 6 2 to 6 2 to 0 2 to 8 2 to 6 2 to 8 20 m/min 20 m/min 20 m/min M 25x.5 M 20x.5 M 25x.5 M 25x.5 M 25x.5 M 25x.5 Multiple Limit Switches Further information is available at

6 Automation at a glance Precision Single Limit Switches Inductive Precision Multiple Limit Switches ENA ESN RGBF SN GSBF Approvals Special features/ specifi c advantages Acc. to DIN Small design Acc. to DIN Upright housing, small fl ange Upright housing Switching element Assured operating distance Switching function Output Operating voltage DC/AC Rated operating current 0 to 4 mm NO + NC 0 to 55 V/20 to 250V 0 to 4 mm NO + NC 0 to 55 V/20 to 250V 0 to 4 mm NO + NC 0 to 55 V/20 to 250V 0 to 4 mm NO + NC 0 to 55 V/20 to 250V 0 to 0.8 mm NC/NO 0 to 30 V Housing material Housing dimensions, min. (H x W x D) 74 x76x28mm 50 x45x22mm of proximity switches of proximity switches of proximity switches Environment Proximity switch spacing Number of proximity switches Degree of protection, max. acc. to IEC /6 2 to 6 2/6 2 to to 4 LED indicator Integrated as standard Integrated as standard Integrated as standard Approach/actuating direction Cable entry cable (pre-assembled) Plug connectors M 6x.5 M 2, 4-pin M 25x.5 M 20x.5 M 20x.5 Detailed information in catalog Multiple Limit Switches available available on request not available All given data refer to the respective minimum or maximum values for the entire series.

7 Automation at a glance Plug Connectors Round design, metal encapsulated Design acc. to DIN 4365, plastic encapsulated Design acc. to DIN 4365, with cable Round design, metal encapsulated, with cable Male socket Male plug Version Female socket Female plug Coupling socket Elbow connector (female) Number of pins 4 to 9 6 +PE/+PE 6 +PE/+PE 8 +PE Thread PG9 to PG2/ M6 to M25 PG /PG3.5/PG6/M20x.5 PG /PG3.5/PG6/M20x.5 M 20x.5 Earth conductor Contact material, µm hard gold-plated CuZn, silver-plated CuZn, silver-plated CuZn, alloy Soldered connection Crimp connection Crimp connection Crimp connection Conductor cross-section, max. mm 2.m 2.m 2 mm 2 Housing material CuZn, matt chromium-plated PET (polyethylene terephthalate) PET (polyethylene terephthalate) Degree of protection to IEC 529 /EN60529 IP 65 IP to +80 C -40 to +90 C -40 to +90 C -40 to +25 C General Contact resistance Rated impulse withstand voltage U imp 4 kv 4 kv 4 kv 3 m.5 kv Rated voltage with PE 250 V 250 V 250 V 50 V Rated voltage without PE 50 V 50 V 50 V Rated current 6 A 0 A 0 A 8 A EMC-compliant assembly The more demanding and complex electronic devices become, the higher the requirements in relation to electromagnetic compatibility (EMC). Only devices that are free of electromagnetic interference will provide trouble-free operation. The connectors on the device input and output can be a key element for an optimal EMC solution. Screened connectors that reduce radiated effects and remove conducted interference are the ideal solution. Round connectors with symmetrical pin patterns and full metal housings are very suitable for this application. The screen function can be optimally realized with these connectors. Detailed information in catalog Round Connectors available available on request not available All given data refer to the respective minimum or maximum values for the entire series. 05/0

8 Please send a fax for contact +49-(0) Company First Name/Last Name Department Street, No./P.O. Box Post Code/City Phone/Fax Please contact me for detailed information. Please send me the following catalogs: Automation Multiple Limit Switches Round Connectors Inductive Ident Systems /0 Subject to technical modifications without notice, no liability will be assumed for any detail. EUCHNER GmbH + Co. KG TA Further catalogs of our product lines Safety and ManMachine can be requested: Safety Non-Contact Safety System CES CMS MGB Safety Switches Plastic Housing Metal Housing Safety Relays Safety Products with Integrated Bus Interface Bolts for Safety Guards Enabling Switches ManMachine Joystick Switches Hand-Held Pendant Stations/Handwheels Electronic-Key-System For further information visit More than safety. EUCHNER GmbH + Co. KG Kohlhammerstraße Leinfelden-Echterdingen Germany Tel. +49-(0) Fax +49-(0) info@euchner.de