PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.

Size: px
Start display at page:

Download "PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection."

Transcription

1 Machinery Listings - Picanol Airjet -40 set Picanol Omini/2000/4 colour. Y O C 2000 Quantity 40 set. Working width 190 cm. Dobby - Staubli electronic 2871 / 16 shaft. Colour 4 Elect Let off /Take up. Accesaries. Held frame - 8 to 10 Pc. Weft fedder. 2 or 4 pc. Warp beam Cloth roll 1.5. Running Condition. Prices usd,cnf. Finatex International: Please ask for details at: marketing@finatexinternational.com Reference: 9365 Cost: 0 Terms: SEE Accessories Hankison Compressed Air Dryer Reference: 4368 Cost: 0 Terms: Ingersoll Compressed Air Dryer (2) Hankison, compressed airdryer, Model 80766, SN 0312A , 700 cmf, 200 PSIG, 460 V, 60Hz, 3Phase Reference: 4369 Cost: 0 Terms: JPS Compressed Air Dryer Ingersoll Rand, compressed air dryer, Mod. TM600 IV, SN 943TM922, 460V, PSIG 278 Reference: 4089 Cost: 0 Terms: Mannesmann Compressed Air Dryer JPS Compressed Air Dryer, Model H-45, Serial , 575 V Reference: 7868 Cost: 0 Terms: - 01 MANNESMANN DEMAG SCREW COMPRESSOR, YOC: 1998, 11 KW, 1,69M³/MIN, 7,5 BAR, WITH AIR COOLING DEVICE AND OIL SEPERATOR ALSO AVAILABLE : HORIZTAL AIR STORAGE TANK Complete Plant Multiple Airjet Please consider: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

2 Reference: 9155 Cost: 0 Terms: - -Weaving Mill. 1 11/11/1997 Sizing machine Benninger 2XZA20 1 Benninger Germany 2 09/07/2001 Sizing machine, Sucker/SVCIER S435 1 Sucker Germany /1/77 Sizing Trough, Sucker/SC 2 Sucker Germany 4 25/12/2003 Air jet loom, Picanol OMNI Plus-2-P Picanol Belgium 5 09/08/2004 Air jet loom, Picanol OMNI Plus-2-P 50 Picanol Belgium 6 09/05/2003 Air jet loom, Picanol OMNI Plus-4-P190 2 Picanol Belgium 7 18/12/1999 Mobile Vacuum Cleaner, Neuenhauser / Top Duct 2 5 Neuenhauser Germany 8 12/12/2003 Weaving mill dust clean system LTG 1 LTG Germany 9 25/12/2003 Weaving mill mobile dust cleaner SOHLET/Top Duct 2 3 SOHLET Germany 10 30/11/2004 Weaving mill mobile dust cleaner SOHLET/Top Duct 2 SOHLET Germany 11 12/11/1996 Weaving loom, ISL ISHIKAWA Japan 12 04/12/1996 Weaving loom, ISL ISHIKAWA Japan 13 15/07/1997 Air jet loom, Picanol OMNI Plus-2-P Picanol Belgium 14 14/11/1997 Air jet loom, Picanol OMNI Plus-2-P Picanol Belgium 15 06/12/1997 Air jet loom, Picanol OMNI Plus-2-P Picanol Belgium 16 23/12/1997 Air jet loom, Picanol OMNI Plus-2-P Picanol Belgium 17 19/11/1998 Air jet loom, Picanol OMNI Plus-2-P Picanol Belgium 18 30/07/1997 Air jet loom, Picanol OMNI Plus-2-P Picanol Belgium 18 10/07/1997 Weaving loom, Vamatex 1900mm 20 Vamatex Italy 20 17/07/1997 Weaving loom, 20 Vamatex Italy 21 29/09/1997 Weaving loom, 40 Vamatex Italy 22 13/08/2004 Air jet loom, Picanol OMNI Plus-2-R Picanol Belgium Reference: 9156 Cost: 0 Terms: - -Denim Mill Equipment List /03/2005 Denim Shrinking machine, Thermex Monfortex 1 Monfors Germany 24 08/12/2004 Sizing & Dyeing machine, TAYA/750D 1 set TAYA Taiwan 25 25/05/2006 Warp tying machine, TPM201PC/TPF3B-21B 1 set Staubli Switzerland 26 11/03/2006 Air jet loom, Picanol OMNIPlus P Picanol Belgium 27 24/02/2005 Air jet loom, Picanol OMNIPlus-2-P Picanol Belgium 28 19/07/2004 Yarn sizing rate text & control system, PLEVA/AS120 2 set PLEVA Germany 29 19/07/2004 Sizing yarn moisture controller, PLEVA/ RR1.CIMATIC 1 set PLEVA Germany 30 06/03/2000 Sizing trough, Sucker / SC 2 Sucker, Germany 31 19/01/2005 Senging machine, OSTHOFF-SENGE/ U97/3 1 Germany 32 10/01/2005 Textile mill dust cleaning system(fpr Denim) LTG 1 set LTG France 33 10/06/2006 Textile mill mobile dust cleaner, Sohler / TOP Duct2 3 SOHLER Germany 34 12/07/2005 Textile mill mobile dust cleaner, Sohler / TOP Duct12 Germany Other auxilary equiment belong to Denim mill 35 27/12/2005 Two roll padder /02/2006 Top roving cleaner /02/2006 Invertor /07/2006 Lithium bromide refigerator 1 Picanol Airjet

3 Reference: Cost: 0 Terms: SEE -PICANOL AIRJET LOOMS model OMNI width 340 cm ppm year colours - 4 weft accumulators - cam motion - 6 shafts - 1,5 warp beam - 1,5 cloth roller 2 PICANOL AIRJET LOOMS model PAT-AE width 330 cm ppm - year colours - 2 weft accumulators - crank - 4 shafts - 1,5 warp beam - 1,5 cloth roller 10 PICANOL AIRJET LOOMS model PAT-2NFA width 190 cm ppm - year colours - 2 weft accumulators - cam motion - 6 shafts - 1,5 warp beam - 1,5 cloth roller 3 PICANOL AIRJET LOOMS model PAT-W width 330 cm ppm - year colours - 2 weft accumulators - cam motion - 6 shafts - 1,5 warp beam - 1,5 cloth roller 2 PICANOL AIRJET LOOMS model PAT-2NA width 280 cm ppm - year colours - 2 weft accumulators - cam motion - 6 shafts - 1,5 warp beam - 1,5 cloth roller 8 KAESSER COMPRESSOR model ES year 1994, reconditioned in capacity 23m3/hour - power engine 160 Kw - air cooled - max compress 8,0 bar 1 M.T.A. SRL DRYING AIR EQUIPMENT model DMN 050 A - year capacity m3/hour - temperature of air in entrance 35 C 1 Different trucks for warping beam and other parts 1 All available accessories and spare parts for the machines. 1 Price: Euro loaded Reference: Cost: 0 Terms: - -Complete AirJet Weaving Plant (43 Looms) including all Accessories for sale, consisting of: 6 Picanol Air Jet Weaving Machines, Model OMNI, Year 2000, Working Width 2.2 m, Staubli Dobby 1 Picanol Air Jet Weaving Machine, Model OMNI F4P, Year 2000, Working Width 2.5 m, Staubli Dobby 3 Picanol Air Jet Weaving Machines, Model OMNI-Plus, Year 2002, Working Width 3.3 m, Staubli Dobby 3 Dornier Air Jet Weaving Machines, Model LWV 4/E10, Year 1996, Working Width 2.8 m 4 Colors Possible 2 Installed, Cam Motion, 10 Levers Capacity, Leno Selvedge, Batcher 30 Sulzer Air Jet Weaving Machines, Model L5100, Year 1990, Working Width 1.9 m, Single Color (10) m/c with crank motion, (10) m/c with cam Motion, (10) m/c with Dobby Motion Electronic Let-Off, Leno Selvedge, 3 Drop Wire Bars, Heddles/Drop WIres 2 TeStrake Weft Feeders, 16 Frames, 2 Warp Beams, Flange 800 mm Mengen Batcher, Speed rpm 1 Brandt Flanged Bobbin Winder for Selvedges, Year 2000, with Creel 1 Spaleck Frame and Reed Cleaning Machine, Year Knotex Drawing In Unit 2 Knotting Units (Uster/Knotex) 1 Air Conditioning Unit, Year Kaeser Compressors 2 Boge Compressors 1 Atlas-Copco Compressor 2 Boreas Air Dryers, Year 2002 Incl. all Spares, Frames, Heddles, Drop Wires, Reeds, etc. Mill is manufacturing interlining upto 300 gr/sqm Location: Europe Available: immediately, in full operation Subject unsold Tsudakoma Airjet

4 Reference: Cost: 0 Terms: - Complete Tsudakoma Airjet Weaving Plant for Sale 1 x Enova Sizing Machine Working Width 3990 cm Year x Tsudakoma Airjet Weaving Looms Model ZA 205 I Year 1993 Working Width 4 x 2800mm and 20 x 3300mm Crank Shaft RPM 600 Each Machine with 2 x Weft Feeders 2 x Heald Frames 1 x Warp Beam 1.5 x Cloth rollers 6000 Droppers 6000 Heald Wires 2 x Air Compressors Screw type Brand Worthington CTACT FOR PRICE AND PICTURES Reference: Cost: 0 Terms: SEE -For Tsudakoma Air Jet Weaving Plant (Hot sale) 20 x ZA205i/209i, year 1990/92, (16) 170cm + (4) 190cm 30 x ZAX /ZA203/ZA205i/ZA209i, year , 190cm 128 x ZA 110i (for synthetic fabric), year 1996, 170cm, (88) Staubli Negative Dobby + (40) Plain Shedding P4 1. Machine status: Still running as the photos already sent by another s. 2. Price & Location: - ZAX (year 2000) FOB Korea USD 280,000.- for total 12 sets - ZA205i (year 1992) FOB Korea USD 40,000.- for total 8 sets - ZA203 (year 1987) FOB Korea USD 30,000.- for total 10 sets ===================================== Total 30 sets FOB USD 346,000 ===> Finally USD330,000.- Warping Dornier Airjet

5 Reference: Cost: 0 Terms: SEE 4x DORNIER Air Jet Looms, type AWS 2/E -Year : 2003 Ww : 360 cm with : Stäubli Cammotion, 6 levers colors : 2 beams : tweenbeam each loom equiped with: feeders : 2 Roj Super Elf batchroller : Neuenhäuser shafts : 4 warpbeam : 2 / each loom, ( + 2 beam separate) healds : 6000 machines : has been running on silk Price : CNF - Asien Port : EUR / each Weaving Dornier Airjet Reference: 5141 Cost: 8,500 Terms: EACH, EURO, CNF 6 DORNIER LWV4/E airjet weaving machines year 1993, 4 colours, nominal width 1900 mm, cam box max 8 shafts equiped 8 shafts, each with 8 healdframes warpbeams + 4 prefeeders clothrollers. Reference: 5046 Cost: 0 Terms: see description 22 DORNIER AIR JET LOOMS model LWV2/E, width 280 cm, year 1995, 2 colours, cam motion 8 lever 3 DORNIER AIR JET LOOMS model LWV2/E, width 340 cm, year 1995, 2 colours, cam motion 8 levers 280 cm = cm = euro, each, cfr Reference: 8350 Cost: 0 Terms: - 19 x Dornier AWSE4/S year 2002 working width: 220 cm electronic dobby Staubli 2881/16 shafts 4 colours 1 x Dornier AWVE6/S year 2001 working width: 220 cm electronic dobby Staubli 2871/2 16 shafts 4 colours Each loom provided of: 4 accumulators ROJ SUPER ELF X2 9 heald frames 1.5 beams 2 cloth rollers 5000 droppers and heddles Delivery: immediately Price : on request

6 Reference: 7222 Cost: 0 Terms: SEE 6 DORNIER AWV8/S- 190 airjet weaving machines, year 2001, panel AT2, 8 colours, electronic dobby STAUBLI 2871/16/12, equipped 12 shafts, electronic let-off and take-up, per loom : 4 prefeeders warpbeams 1000mm clothbeams + 6 healdframes + 5 warpstop bars. Price: EUR /EACH, CNF VALUE Please consider: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!! Reference: 8759 Cost: 0 Terms: -DORNIER LWV4/E air jet loom - 10 pcs working width: 3800 mm max 6 healds cam device Staubli weft feeders divided warp beams diameter: 1000mm fabric taking on BELMATEX taffle device year: 1997 Reference: 8760 Cost: 0 Terms: -DORNIER LWV2/E air jet loom - 10 pcs cam type working width: 1855 mm 4 healds 2 main nozzles year pcs year pcs Reference: 8973 Cost: 0 Terms: - -No. 21 dornier airjet awve ww 2.2 yoc 2002 staubli dobby

7 Reference: 8135 Cost: 0 Terms: SEE DORNIER LWV2/E air jet loom - 5 pcs cam type working width: 1855 mm 4 healds 2 main nozzles year pcs year pcs Best price for all 10 machines: CNF EUR DORNIER LWV4/E air jet loom - 5 pcs cam device Staubli 1627 working width: 3800 mm year: machines year machine fabric taking on BELMATEX taffle device Each machine eqipped with: 4 healds frame (max 6 frames on the machine) 4 weft feeders ROJ Super Elf approx pcs of droppers and healds 3 warp beams on each loom (divided warp beams diameter: 1000mm) Best price for all 5 machines: FCA EUR Please consider: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!! Reference: Cost: 0 Terms: SEE -20 Dornier Airjet 19 airjet looms DORNIER AWSE 4/S, nominal width 2200mm, yoc.2002 STAUBLI dobby levers installed, 4 colours AT2 digital panel, Electronic takeup and let off, each 1 frequency converter 1 airjet loom DORNIER AWV E 6/S, nominal width 2200mm, yoc.2001 STAUBLI dobby 2871/2 16 levers installed, 6 colours AT2 digital panel, Electronic takeup and let off, frequency converter accessories each: 9 healdframes GROB 4 accumulators ROJ Super ELF X2 1,5 warpbeams disc dia 800mm 2 clothrolls 5000 heddles/dropwires Price 25, Euro C&F

8 Reference: Cost: 0 Terms: - -DORNIER AWS 2-E AIRJET cm 2 2 Warp Beams / 4 Healdframes / Super Elf Staubli / Exentr 1:1,1:2 / Neuenhauser Batching 1,25x2/machine warp beams Few Hours Running Excellent EU 4 PCS Reference: Cost: 0 Terms: SEE - 25 DORNIER AIRJET WEAVING LOOMS Type LWV2/E Year 1995 Working width 2800 mm With Cam Motion, Type Levers 2 Colors Each loom equipped with: 2 Weft Accumulators Price: F.O.T EURO 11, each 3 DORNIER AIRJET WEAVING LOOMS Type LWV2/E Year 1995 Working width 3400 mm With Cam Motion, Type Levers 2 Colors Each loom equipped with : 2 Weft Accumulators Price: F.O.T. EURO 12, each Location: Available: Europe Immediately Reference: Cost: 0 Terms: - -DORNIER AIR JET LOOMS - there are no BEAUTIFUL LOOMS as this in the marketplace - - N.4 DORNIER AWS6 / S Year N.1 DORNIER AWSE4 / S Year 2004 Width 2200 mm POSITIVE STAUBLI dobby type 2881 Each machine is supplied of: n. 6 ROJ Super ELF weft-feeders n. 1 warp stop motion GROB 6 bars n. 14 Frames GROB GROBEXTRA LATCH n. 10,000 wires OPTIFIL GROB x1, 2 n. 10,000 GROB drop pins 165/11x0, 20 Loom equipped for flange beams 1000 mm Pictures: attached pdf format Separately Pictures: yes on demand

9 Reference: Cost: 0 Terms: SEE DORNIER Weaving Loom LWV 4/S 4 x Year 1995 / 3 x Year 1996 ww: 3900 Dobby: Stäubli 2117 RS for 10 Heald Frames RPM: 520/min Colors: 2 Electronic warp regulator Each machine with: -2 Weft accumulators ROJ Super E -8 Heald frames -2 Warpbeams Ø 1000 mm -1 Cloth roller Healds Droppers euro, cnf, asian port Reference: Cost: 0 Terms: - -2 x Dornier Air- jet weaving machines type (AWSE, 4J, 300) Year of construction 2007, Working width 3000 mm, Each loom equipped with: - Sides and two central pneumatic tuck-in devices, - Servo control for main and tandem nozzles, - Double jumbo Satubli jacquard machine type LX 3202, year of construction 2007 & 2009, - Capacity hooks (10240 installed),jc6 programmer, M6 modules, - One gantry for both machines, -2 warp beam and 2 cloth roll for each machine, - Harness, - Drop wire, - 4 colors feeder RoJ super ELF - 5 bars for warp stop motion. Both machines have single cord on a single headle, (i.e. no repeat and design is adapted on full width). Machines are like new Reference: Cost: 0 Terms: X Dornier AWV airjet looms o Year : 2003 o Working width : 380 o Staubli Dobby shedding type 1661 o Capacity 10 Levers o Installed 6 Levers o 6 Frames o 2 Colors o 2 Accumulators Dornier Super ELF o 6 Warp stop bars o Electrical Let off o Electrical Take up o 1 Reed o Side Tuck in o Manual Pick finding o 10,000 Droppers each loom o machines with split beam o Beam Dia 1000mm o 3 Beams supplied with each machine o With Off loom Batcher o 4 cloth roll supplied with each machine o 440 / 60

10 Reference: Cost: 0 Terms: - -(3) DORNIER: LWV2/E W:3400 CAMS STAUBLI 1607 YOC 1995 Reference: Cost: 0 Terms: - -(4) DORNIER: LWV 8/S W:3600 STAUBLI DOBBY 2670x1-2670/2x3 20/20/20 YOC 1998x1-2000x1-2001x2 Reference: Cost: 0 Terms: DORNIER: LWV2/E W:2800 CAMS STAUBLI 1607 YOC DORNIER: LWV2/E W:3400 CAMS STAUBLI 1607 YOC 1995 Reference: Cost: 0 Terms: - -ALL LOOMS ARE WORKING IN GOOD CDITI. THERE ARE 14 SETS UNWORKING YOU CAN USE THEM AS SPARE PARTS OR RUNNING THEM ALSO We sell the following looms (on behalf of one of our clients). 2 x Dornier Air- jet weaving machines type (AWSE, 4J, 300) Year of construction 2007, Working width 3000 mm, Each loom equipped with: - Sides and two central pneumatic tuck-in devices, - Servo control for main and tandem nozzles, - Double jumbo Staubli jacquard machine type LX 3202, year of construction 2007 & 2009, - Capacity hooks (10240 installed), JC6 programmer, M6 modules, - One gantry for both machines - 2 warp beam and 2 cloth roll for each machine, - Harness, - Drop wire, - 4 colors feeder ROJ super ELF - 5 bars for warp stop motion. Both machines have single cord on a single headle, (i.e. no repeat and design is adapted on full width). Machines are still running and look like new. If you are interested we can send you photos and price. Location: Middle East Reference: 5904 Cost: 34,000 Terms: EACH, EURO, CNF 01 DORNIER Air jet weaving loom type AWV 8/J 330 year of construction 2002, nominal working width 3300mm, 8 colours, running speed 640 rpm, equipped with 2 warp beams Ø 800mm, 2 cloth rollers, GROB KFW Droppers, 8 weft accumulators ROJ Super 11, FU, Jacquard BAS type: MJ3 32 year of construction 2002 for 3072 hooks, controller S600, max. speed 750 rpm, Locati-Harness Year 2004 of threads.

11 Reference: 7711 Cost: 0 Terms: SEE 02 DORNIER Air jet weaving looms type AWSE 4/E year of construction 2006, working width 3600mm, can work double and single beams flanges Ø 1000mm, tappet box STAUBLI type 1751 with 6 levers installed, Speed variable upto 600rpm & 400V 50-60Hz, fabrics run Spun polyester, each equipped with : 4 ROJ Electrotex Superelf feeders, 6 heald frames, NEUENHAUSER external batcher, inverter for speed control, 4 half beams, electronic take up & let off, 4 warp stop motion bars, double back rest. Various spares inc. Reeds, selvedge cutters etc. Price CFR major Sea ports : Euro per loom Please consider: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!! Reference: 7712 Cost: 0 Terms: SEE 01 DORNIER Air jet weaving loom type AWV 8/J 330 year of construction 2002, nominal working width 3300mm, 8 colours, running speed 640 rpm, equipped with 2 warp beams Ø 800mm, 2 cloth rollers, GROB KFW Droppers, 8 weft accumulators ROJ Super 11, FU, Jacquard BAS type: MJ3 32 year of construction 2002 for 3072 hooks, controller S600, max. speed 750 rpm, Locati-Harness Year 2004 of threads. Price CFR Major Sea ports : Euro Please consider: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!! Reference: Cost: 11,500 Terms: EACH, USD, FOT -16 USED DORNIER AIR JET JACQUARD WEAVING MACHINES, 250CM, (9) YEAR 1991 MODEL LWV4/J, (1) YEAR 1989 MODEL DLW4/J, (6) YEAR 1994 MODEL LWV6/J; EACH UNIT EQUIPPED WITH E LOOM BEAM WITH 800MM BEAM FLANGES, E FILLING CREEL, LOOM CTROL BOX, 6 BANKS WARP STOP MOTIS WITHOUT DROP WIRES, 4 ROJ MINI ELF FILLING FEEDERS, AND E CLOTH ROLL FOR TAKE UP Serial Numbers:

12 Reference: Cost: 0 Terms: SEE -6-Dornier Air jet Jacquard weaving machines, model LWV 8/J, 320 Cm width. Staubli jumbo Jacquard 5120 hooks, JC 4 controller, single beam, off loom take up, 8 filling feeders/loom, serial # 71311,71473,71309,71314,71378,71307, 1995 year. Price loaded into containers $36,500 each Status: Recently stopped, very good condition Delivery: Immediate Location: N. America Photographs available upon request Reference: Cost: 0 Terms: SEE 4- DORNIER air jet Looms, Type AWS 2/E -Ww : 360 cm Year : 2003 with : Stäubli Cammotion, 6 levers colors: 2 beams: tweenbeam each loom equiped with: feeders : 2 Roj Super Elf batchroller : Neuenhäuser shafts : 4 warpbeam : 2/each machin (+2 beam separate) healds : 6000 machines has been running on Silk. Price: 68,000 Euro, CNF for all four machines Reference: Cost: 0 Terms: SEE -Dornier Airjet Model: AWV2/E YOC: 2002 Working width : 150 cm Cam motion Stäubli weft accumulators ROJ Elektrotex Location: Germany Price: FOT In case of genuine interest please contact us.

13 Reference: Cost: 0 Terms: - -4 Dornier LWV2/E, Airjet Weaving Machines. Year : 1995, Width : 340cm, 2 Colour Cam Motion, Warp Stop motion bar is available, Warp Reinforced Cylinder is available, With MB 500 Tension Sensor, With 2 Weft Feeders, Without Heald frame/warp Beam/Batcher/Weft feeders creel, These Machines were running at 540 rpm before they stopped. Reference: Cost: 0 Terms: - -2 DORNIER LWV 2/S 14 airjet weaving machines, yoc. 1995, ww 2400 mm, each with dobby STAUBLI 2580RS, 14 shafts, with 2 ROY SUPER ELF prewinders, each with 3 warpbeams discdiam mm, external batching motions Picanol. Reference: Cost: 0 Terms: DORNIER AIR JET looms model LWV2/E Year 1995 Width 280 mm 2 colors Cam motion 8 levers 03 DORNIER AIR JET looms model LWV2/E Year 1995 Width 340 mm 2 colors Cam motion 8 levers Looms are equipped with 2 weft accumulators and Leno device There are no beams, cloth rolls and frames. Location: Europe Price and photos: on request Reference: Cost: 0 Terms: - 24 DORNIER/AIR JET: LWV2/E W:2800 CAMS STAUBLI 1607 YOC 1992x1-1994x x12

14 Reference: Cost: 0 Terms: - 3 DORNIER/AIR JET: LWV2/E W:3400 CAMS STAUBLI 1607 YOC 1995 Reference: Cost: 0 Terms: - 6 DORNIER/AIR JET: LWV 8/S W:3600 DOBBY STAUBLI 2677-P1 20/16/16 YOC 1998 Reference: Cost: 0 Terms: - -4 Dornier LWV2/E, Airjet Weaving Machines. Year: 1995, Width: 340cm, 2 Colour Cam Motion, Warp Stop motion bar is available, Warp Reinforced Cylinder is available, With MB 500 Tension Sensor, With 2 Weft Feeders, Without Heald frame/warp Beam/Batcher These Machines were running at 540 rpm before they stopped. Reference: Cost: 0 Terms: - -2 Dornier Airjet LWS/E 280 cm with CAM Dornier Airjet AWS/E 260 cm with CAM 2003 Total Accessories for 3 machines: 2 warp beam 6 accumulators 12 Heald Frames 18 Contact Bar Location Europe Schengan Area Delivery Ready

15 Reference: Cost: 0 Terms: SEE -Dornier air jet looms LWV 8/S, w.3600, y / 1999 / 2000, dobby & jacquard, y.1995 DORNIER AIR-JET LOOMS FOR SALE: 6 looms dobby, 2 looms jacquard N 6 -Dornier Air-jet looms type LWV 8/S width 3600mm, 8 colours. Year 1998, 2 -looms with Staubli dobby mod P1 with 16 shafts, year 1999, 2- looms with Staubli dobby mod with 16 shafts, year 2000, 2 -looms with Staubli dobby mod. 2670/2 with 16 shafts, each loom completed with the following accessories: Nr heddles. Nr wire droppers Nr 6 -heald frames 1 -warp stop motion 6 bars 1 -creel with 5 weft feeders type ROJ SUPER ELF Possibility of electronic inverter control of the main motor of all looms, N3 inverters supplied for 6 looms (can be rotated when needed) Double command motor for twin beams 1 -beam 1 -cloth roller Price: Euro ,00 each loom mill floor, net for us Delivery: ready N 01- Atlas Copco air compressor ZT75, complete air-condenser device. Could be supplied at a price of euro ,00 mill floor Reference: Cost: 0 Terms: SEE 4- DORNIER air jet Looms, Type AWS 2/E -Ww : 360 cm Year : 2003 with : Stäubli Cammotion, 6 levers colors: 2 beams: tweenbeam each loom equiped with: feeders : 2 Roj Super Elf batchroller : Neuenhäuser shafts : 4 warpbeam : 2/each machine (+2 beam separate) healds : 6000 Price: 62,000 euro/cnf Reference: Cost: 0 Terms: SEE DORNIER AWV8/S airjet weaving machines year 2001, width 1900mm, 8 color, panel AT-2, electronic STAUBLI dobby 2871/16/12 equiped 12 shafts (quick-link), 5 warpstop bars, with clothroll-drive as well as with external batching motion (Neuhauser - axial drive), let-off and take-up both electronic, accessories per loom : 7 prefeeders ROJ Super Elf heddles/droppers + 10 frames warpbeams 1000mm. Euro /-- each, CFR main seaport

16 Reference: Cost: 0 Terms: DORNIER airjet weaving machines AWS6/E - 190, year 2007(6) (2) (3) -2002(1) reedspace 1900mm, 4 colors, panel AT2, cambox type shafts, accessories per machine : 1 warpbeam 600mm (max 800mm) clothrolls + 7 healdframes + 4 prefeeders. Price: Euro /--each, CNF Reference: Cost: 0 Terms: - -Dornier LWV 4/E Air Jet Loom Ww: 430 cm,yoc: 1998 DailogPanel II Stäubli Dobby EM 1761 Reference: Cost: 0 Terms: - -4 X DORNIER AIRJET WEAVING MACHINES LW V4/S, 2 X 1999, 2 X 2000 REINFORCED FOR INDUSTRIAL FABRICS WORKING WIDTH: 2100mm NUMBER OF COLOURS: 4 DOBBY: STAEUBLI, TYPE 2871, ELECTRIC, 12 SHAFTS INSTALLED BATCHING MOTI: NEUENHAUSER WITH - LOOM INSPECTI ACCESSORIES PER MACHINE: 2 WARP BEAMS DIAMETER 1000mm 4 ACCUMULATORS ROJ SUPER ELF 6 WARP STOP MOTI BARS 4000 HEALD WIRES 4000 DROP WIRES 10 HEALD FRAMES 6 X DORNIER AIRJET WEAVING MACHINES LW V4/S, 2001 REINFORCED FOR INDUSTRIAL FABRICS WORKING WIDTH: 2300mm NUMBER OF COLOURS: 4 DOBBY: STAEUBLI, TYPE 2871, ELECTRIC, 12 SHAFTS INSTALLED BATCHING MOTI: NEUENHAUSER WITH - LOOM INSPECTI ACCESSORIES PER MACHINE: 2 WARP BEAMS DIAMETER 1000mm 4 ACCUMULATORS ROJ SUPER ELF 6 WARP STOP MOTI BARS 4000 HEALD WIRES 4000 DROP WIRES 10 HEALD FRAMES

17 Reference: Cost: 0 Terms: SEE -6 X DORNIER AIRJET WEAVING MACHINES LW V4/S, 2001 REINFORCED FOR INDUSTRIAL FABRICS WORKING WIDTH: 2300mm NUMBER OF COLOURS: 4 DOBBY: STAEUBLI, TYPE 2871, ELECTRIC, 12 SHAFTS INSTALLED BATCHING MOTI: NEUENHAUSER WITH - LOOM INSPECTI ACCESSORIES PER MACHINE: 2 WARP BEAMS DIAMETER 1000mm 4 ACCUMULATORS ROJ SUPER ELF 6 WARP STOP MOTI BARS 4000 HEALD WIRES 4000 DROP WIRES 10 HEALD FRAMES PRICE EACH EX FLOOR EURO 19'500 Reference: Cost: 0 Terms: SEE -14-DORNIER AIR JET LOOMS 1900 MM WW TOTAL 23 LOOMS 4 PCS 2002 YEARS STAUBLI ECCANTRIC 4 COLOURS 3 PCS 2001 YEARS STAUBLI ECCANTRIC 4 COLOURS 16 PCS 2001 YEARS STAUBLI 2861 DOBBY EURO Reference: Cost: 0 Terms: SEE (6)Dornier LWS airjet looms LWS 4/S with Stäubli dobby 2580 ww: 2200mm year: 3x 1994, 3x 1995 each with: - 4 feeders - 1 reed - 8 healdframes - 1 warpbeam Ø800mm droppers healds - none c Price: 8,0000 euro, cfr Reference: Cost: 0 Terms: Dornier LWV6/E 1997/8 AT2 control panel, 200cm, Fim cam box ME2023 with 8 levers and 6 harness frames, droppers and heddles as fitted on 5 contact bars, 6 color with 6 weft accumulators, 1 beam and cloth roll Gunne Airjet

18 Reference: Cost: 0 Terms: - -Re: Used Air Jet Tyre cord looms. - Maker : Gunne, Germany. - Yom : 1999 years. - Type : 190 TC - Cam motion type. - Working width : 1,900 mm. - Harness frame :4 pcs/set. - Wire heald : 5,000 pcs /set - 2 weft feeder. - 1 :1.5 cloth roller. - Reeds :1 pcs/set. - Complete set with standard accessories - a) Creel parts. b) Mangle roller parts. c) Weaving machine parts d) Batching parts,. -Location : Korea -Condition : Now running Multiple Airjet

19 Reference: Cost: 0 Terms: SEE -Brand: TOYODA Air Jet Looms Type: JA2SF-210DE-MF T610 Year: 2 width:210cm Looms: 6 sets with STAUBLI Dobby 2580C 2 noz 8 sets with CAM 4 noz 10 sets with CAM 2 noz Beam:1.5pcs (flange dia 914mm)/each looms Quantity:24 set still running Delivery time: 3 months Price: Dobby 6 sets F.O.B USD:17,000.-/each loom CAM 18 sets F.O.B USD:14,800.-/each loom Brand: VAMATEX RAPIER LOOMS Type: SILVER HS Year: width:220cm Dobby: STAUBLI 2670-B E-dobby 20/20/12 Color:8 Feeder: 3pcs Beam:1.5pcs (flange dia 1000mm)/each looms Quantity:16 set still running Delivery time: 3 months Price: F.O.B USD:35,500.-/each loom Nissan Airjet Reference: 8359 Cost: 0 Terms: - 1. MODEL : air-jet looms 2. MAKER : Nissan 3. QUANTITY : 90 SETS 4. YOM : WORKING WIDTH : 190 CM 6. NO. OF COLOR : HEALD FRAME : 4 PCS 8. SHEDDING MOTI : pedal plate & DOBBY 9. MODEL OF DOBBY : pedal plate 1600 & Dobby NO. OF BEAM : 1 PC/SET CLOTH ROLLER NO. OF DROPPER/HEALD : PCS/SET 12. NO. OF FEEDER : 1~2 PCS/SET Reference: 9133 Cost: 0 Terms: - -Nissan LW551, year of 1993,190cm Reed Widt, Murata MX-7, 14 Heald Wires, 12 Heald Frames, 2-3 Feeders, 1.5 Warp Beam, 1.5 Cloth Beam

20 Reference: 9135 Cost: 0 Terms: - -. Nissan Lw551, year of 1997, 190cm Reed Width, Staubli 2521A, 14 Heald Wires, 12 Heald Frames, 2-3 Feeders, 1.5 Warp Beam, 1.5 Cloth Beam Reference: 9136 Cost: 0 Terms: - -Nissan LW551, year of 2001, 190cm Reed Width, Seobu SB900, 14 Heald Wires, 12 Heald Frames, 2-3 Feeders, 1.5 Warp Beam, 1.5 Cloth Beam Reference: 9535 Cost: 0 Terms: - -Nissan Airjet NAX? 100A YOC Japan Qnty - 32 For spun weaving Max. RPM 800 Width cm Staubli Cam1620 model 8 shaft capacity & running 6 shaft Dotted balloon cover attachment Heald frame all on the loom Heald wire 4000 no per loom Dropper 4000 per loom Two side crank drive Super fast main motor 3.7 kw Electronic let off system Double back roller, positive easing Mechanical take up system Main drive emery roll and two press roll Beam dia 1000 mm 1.5 per loom Double weft feelar Rotary leno both side Multifunction stop mark prevention option Electric warp stop motion 6 line contact bar Machines are running in very good conditions Price : 11,500 USD CNF (Negotiable)

21 Reference: Cost: 0 Terms: Nissan Airjet Weaving Machines NAX 100A For spun weaving Max. RPM 800 Width cm Staubli Cam 1620 Model 8 shaft capacity & running 6 shaft Dotted balloon cover attachment Heald frame all on the loom 4000 Heald Wires per loom 4000 Droppers per loom Two side crank drive Super fast main motor 3.7 kw Electronic let off system Double back roller, positive easing Mechanical Take Up System Main Drive Emery Roll And Two Press Roll 1.5 Beam per loom / Dia 1000 mm Double weft feeder Rotary leno both side Multifunction stop mark prevention option Electric warp stop motion 6 line contact bar Machines are running in very good conditions Year: 1998 Reference: Cost: 0 Terms: Nissan Airjet Weaving Machines NAX 100A For spun weaving Max. RPM 800 Width cm Staubli Cam 1620 Model 8 shaft capacity & running 6 shaft Dotted balloon cover attachment Heald frame all on the loom 4000 Heald Wires per loom 4000 Droppers per loom Two side crank drive Super fast main motor 3.7 kw Electronic let off system Double back roller, positive easing Mechanical Take Up System Main Drive Emery Roll And Two Press Roll 1.5 Beam per loom / Dia 1000 mm Double weft feeder Rotary leno both side Multifunction stop mark prevention option Electric warp stop motion 6 line contact bar Machines are running in very good conditions Year: 1998

22 Reference: Cost: 0 Terms: - -Nissan Air Jet Weaving Machines Model NAX 100 Year: Max Filling Insertion Rate Avg. Machine Speed 720 PPM 190 cm Working Width Off loom batcher Cam Motion Mechanical Motion Control Cams & Levers Related to Motion 6 Total Capacity Cams & Levers Related to Motion 4 Installed Colors: 2 Capacity/Installed Colors controlled by Card Leno Selvedge Auto Pick Finder Auto Shed Leveling Electronic Take-Up Off Machine Take-Up Electronic Weft Monitoring Centralized Monitoring Overhead Cleaning Beam Flange Diameter 1000 mm 6.86 Drop Wire Bars Per Machine 2 Nissan Weft Feeders Per Machine Reference: Cost: 0 Terms: NISSAN LW 54 water jet looms, widht 1900 mm., two colours, yoc 1990 Reference: Cost: 0 Terms: X Nissan Air jet LA51-190cm 3 levers Installed, Batching motion,

23 Reference: Cost: 0 Terms: SETS NESSAN 100 A LOOMS FOR SALE. 1. MODEL : NAX100A 2. MAKER : NISSAN 3. QUANTITY :56 SETS 4. YOM : WORKING WIDTH : 190 CM 6. NO. OF COLOR : 2 COLORS 7. HEALD FRAME : 4 TO 6 PCS 8. SHEDDING MOTI : CAM 1620 STAUBBLI 9. MODEL OF CAM 1620 : STAUBLI 10. BEAM & CLOTH ROOLER : 1.5 PC/SET 11. DROPPER & HEALD : PCS/SET 12. FEEDER : 2 PCS/SET ALL MACHINES FOR DENIM FABRIC Panther Airjet Reference: Cost: 26,000 Terms: EACH, EURO, CNF -20 PANTHER RAPIER DOBBY LOOM FOR SALE. 1. MODEL : PANTHER 2. MAKER : E QUANTITY : 20 SETS 4. YEAR OF MANUFACTURE : WORKING WIDTH : 190 CM 6. NO. OF NOZZLE : 8 NOZZLE 7. HEALD FRAME : 10~12 PCS/SET 8. SHEDDING MOTI : DOBBY 9. MODEL OF DOBBY : STAUBLI BEAM/CLOTH ROLLER : 1.5 PC/SET 11. DROPPER/HEALD : 4000~5000 PCS/SET 12. FEEDER : 4 PCS EACH ALL MACHINES ARE STILL RUNNING IN EXCELLENT CDITI. MACHINES LIKE NEW.

24 Reference: Cost: 0 Terms: PANTHER RAPIER DOBBY LOOM FOR SALE. 1. MODEL : PANTHER 2. MAKER : E QUANTITY : 20 SETS 4. YEAR OF MANUFACTURE : WORKING WIDTH : 190 CM 6. NO. OF NOZZLE : 8 NOZZLE 7. HEALD FRAME : 10~12 PCS/SET 8. SHEDDING MOTI : DOBBY 9. MODEL OF DOBBY : STAUBLI BEAM/CLOTH ROLLER : 1.5 PC/SET 11. DROPPER/HEALD : 4000~5000 PCS/SET 12. FEEDER : 4 PCS EACH ALL MACHINES ARE STILL RUNNING IN EXCELLENT CDITI. MACHINES LIKE NEW. Picanol Airjet Reference: 7182 Cost: 11,800 Terms: EACH, USD, FOT MAKE: PICANOL AIR JET MODEL: DELTA X 1997 YEAR W.WIDTH: 190CM QUANTITY: 40 SETS HEALD FRAMES: 10 NOZZEL: 4 STAUBLI ELECTRIC DOBBY 2670 BEAM AND CLOTH ROOLER: 1.5 PRICE UP REQUEST Please consider: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!! Reference: 7224 Cost: 0 Terms: - Please consider: If prices or commissions are mentioned, they do not include commission for us or any agents. we kept the message original!!!

25 Reference: 7256 Cost: 0 Terms: - I can supply fantastic running condition Picanol Air-Jet Looms OMNI, 220cm, 6 Color, Dobby #2861, yom2000 x 36sets. As you know, now a days there s a big demand of 6 Colors Shirting Weaving by Picanol OMNI Looms, More production than Rapier looms, so can reduce the fabric order delivery time, As the fabric market need quick delivery at this quick changes of fashion trends!! 6 Color looms is very seldom to find in the 2nd hand Air-Jet market, please don t lose this good opportunity. All machines are under my possession. If you are interested, please send me one , then I can give more photos and price. Looms looks cotton dusty, but perfect condition. There are also 14sets of OMNI, 220cm, 4 Color, #2861 dobby looms. 6 Color Looms!! Short Description OMNI-6-R-220cm Brand Picanol Belgium Qt'y 36 sets Type OMNI Width 220cm Year May 2000 Color 6 Pre-winder 5 pcs/set Type #2231 Shedding e-dobby Maker/Type Staubli / #2861 Positive-Dobby Drive Lever Max.16, equipped over 14 HF 12 Warp Stop Motion Box & Bars Dropper Box with MAX.6 Bars equipped over 5. Speed 750 RPM Warp Beam dia. 805 mm Pcs/set 1.5 Cloth Roller 1.5 Dropper, Healds 4,000 Condition running Let-Off/Take-up Drive, Back Rest ELO/ETU. Double Back Rest R/O, Voltage/Frequency 380/60 Delivery immed. Please consider: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!! Reference: 5324 Cost: 0 Terms: 18 PICANOL OMNI -2P 3400 mm.staubli cams 1620,yoc 1994.

26 Reference: 7342 Cost: 0 Terms: SEE 40 Nos Picanol Omni Weaving Machines 18 Pcs Picanol Omni Plus Width:280 cm Year: colors Staubli electronic dobby shafts 12 Pcs. Picanol Omni Plus Width:340 cm Year: colors Staubli electronic dobby shafts 10 Pcs. Picanol Omni Width:280 cm Year: colors Cam motion 10 shafts ( installed 6) Each Machine is Equipped with: 6 heald frames 2 weft feeders 1,5 beams 1,5 cloth rolls 8000 heddless and droppers complet prıces million euro Please consider: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!! Reference: 7507 Cost: 0 Terms: SEE Picanol Gammax--8-R-230 (8 color) - 50sets Y.O.C. Staubli E-Dobby 2670 (16 levers) 3 Pre-Winders, 1.5 Bems, 1.5 Cloth Rollers, 12 Frames, Heald & Droppers as it on m/c Prices : USD41, CNF Nett Asian main port Please consider: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!! Reference: 7505 Cost: 0 Terms: SEE Picanol OMNI-2-R/P-220 (2 color) - 20sets Y.O.C. Staubli E-Dobby 2861(15 levers) for R type, Staubli Cam Motion 1600B (7 levers) for R type 2 Pre-Winders, 1 Beam(800mm), 1 cloth Roller, 6-10 Frames, 6 Warp Stop Bars, Heald & Droppers as it on m/c Prices : EUR14, CNF Nett Please consider: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!! Reference: 7506 Cost: 0 Terms: SEE Picanol GTX-4-R-190 (4 color) - 18sets Y.O.C. Staubli E-Dobby 2660 (16 levers), 2 Pre-Winders, 1.5 Beams, 1.5 Cloth Rollers, 8 Frames, Heald & Droppers as it on m/c Prices : USD20, CNF Nett Asian main port Please consider: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

27 Reference: 7504 Cost: 0 Terms: SEE Picanol OMNI-4-R-190 and OMNI-2-R sets Y.O.C. Staubli E-Dobby 2871 (15 levers) 3 Pre-Winders for OMNI-4-R, 2Pre-Winders for OMNI-2-R 1 Beam (800mm), 1 Cloth Roller, 10 Frames, 6 Warp Stop Bars, Helds & Droppers as it on m/c Prices : EUR19, CNF Nett Please consider: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!! Reference: 7796 Cost: 0 Terms: - 6 Picanol Omni width 3400 mm., Staubli cams 1620, single beam, yoc 1997 Please consider: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!! Reference: 7981 Cost: 0 Terms: SEE Pleased to offer Fantastic Condition, OMNI, 220cm, 4 Color, Dobby#2861 x 24sets. Status : Running. Price : 4 Color : US$24,500-/set C&F C:5% as final.. No. JR Short Description OMNI-4-R-220cm Brand Picanol Qt'y 24 sets Type OMNI Width 220cm Year 2000 Color 4 Pre-winder 3 Type #2231 Shedding e-dobby Maker/Type Staubli / #2861 Drive Lever 16 HF 12 Warp Stop Motion Box & Bars Dropper Box with 6 Bars Speed 750RPM Warp Beam dia. 800mm Pcs/set 1.5 Cloth Roller 1.5 Dropper, Healds 4,000 Condition running Let-Off/Take-up Drive, Back Rest ELO/ETU. Double Back Rest R/O, Voltage/Frequency 380/60 Delivery immed. Please consider: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

28 Reference: 8032 Cost: 0 Terms: SEE Model:Picanol OMNI-4-R-220 (4 color) Width:220cm Quantity : 24sets Year:2000 y.o.c. Each loom equipped with: Staubli E-Dobby 2861 (16levers) 3 Pre-Winders 1.5 Beams (800mm dia.) 1.5 Cloth rollers 12 Frames 6 Warp stop motion bars 4,000 Healds & Droppers ETO/ETU Double Back Rest R/O Voltage 380/60 Still running Prices : USD25, CNF nett Asian main port Please consider: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!! Reference: 8036 Cost: 0 Terms: SEE Picanol OMNI-F-4-R YOC 2001/2002 Qty 24 sets Width220 cm Staubli 2861 elec-let off; ele- take up 8-10 pcsof heald frames 4 nozzels, 4 weft feeders beam/cloth roller 1.5 Running on the mill floor CNF USD 23,400 by T/T C5 CNF USD 23,900 by L/C C5 Please consider: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!! Reference: 7070 Cost: 0 Terms: - 15 Picanol Omni 2 R yoc 1994,staubly dobby 2580/ RS 15 levers ( 8 x 190 cm + 7 x 220 cm ) Please consider: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!! Reference: 7798 Cost: 0 Terms: - Picanol Omni width 2200 mm., Staubli dobby 2861 / 16 levers, yoc 1999 Please consider: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!! Reference: 7797 Cost: 0 Terms: - Picanol Omni width 1900 mm., Staubli cams 1620, yoc 1997 Please consider: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

29 Reference: 8360 Cost: 0 Terms: - 1. MODEL : Omni-pluis 2. MAKER : PICANOL 3. QUANTITY : 48 SETS 4. YEAR OF MANUFACTURE : 5. WORKING WIDTH : 230 cm 6. NO. OF COLOR : 7. HEALD FRAME : 18 PCS 8. SHEDDING MOTI : DOBBY 9. MODEL OF DOBBY : 10. NO. OF BEAM : 1.2 PC/SET CLOTH ROLLER NO. OF DROPPER/HEALD : 12. NO. OF FEEDER : 2 PCS/SET Reference: 8515 Cost: 0 Terms: - Air-jet looms Picanol width 1900mm: -Nr 2 model PAT AF-2N cam motion,1991,1993 -Nr 11 model PAT2-N-AF,cam motion,1990 -Nr 3 model PAT2-R-AF,Dobby Staubli,1990 Specifications: 5-6 levers 2 coulours 2 preefeders 1,5 beems dia 800mm 1,5 cloth rollers hedles/drops Reference: 5454 Cost: 14,000 Terms: EACH, EURO, CNF 15 PICANOL OMNI-2R airjet weaving machines year 1994, with dobby STAUBLI 2580RS equiped 15 shafts (10 machines) and 12 shafts (5 machines), working width 2200 mm (7 machines) and 1900 mm (8 machines), 2 colours, each with external batching motion and 2 prefeeders Iro and 2 warpbeams 1000mm and 12 healdframes and 6000 heddles/droppers. Reference: 8761 Cost: 0 Terms: -PICANOL DELTA air jet looms - 10 pcs cam type, working width: 1855 mm 4 healds 2 main nozzles year 1994

30 Reference: 8762 Cost: 0 Terms: - -PICANOL PAT2-R-A LOOM - 3 pcs Year: 1990 working width: 190 cm for beams diameter 600 mm Staubli 2580 dobby with 16 hooks Looms with IWF harness PICANOL PAT2-R-A LOOM - 5 pcs Year: 1990 working width: 190 cm for beams diameter 1000 mm Staubli 2580 dobby with 16 hooks Looms with IWF harness Reference: 8869 Cost: 0 Terms: - - Loom Type No Serial No Date Tucking Device Shafts Frames Width Beams Cloth Rolls Warp Stop Bars Picking Middle Receiving 1 Picanol Omni cm 1 Batching Motion 6 2 Picanol Omni cm 1 Batching Motion 6 3 Picanol Omni cm 0 Batching Motion 6 4 Picanol Omni cm 1 Batching Motion 6 5 Picanol Omni cm 1 Batching Motion 6 6 Picanol Omni cm 1 Batching Motion 6 7 Picanol Omni cm 0 Batching Motion 6 8 Picanol Omni cm 1 Batching Motion 6 9 Picanol Omni cm 1 Batching Motion 6 9 Total Spares Reference: 8949 Cost: 0 Terms: SEE -50 x Picanol Omni - 4p Year, 2010/12. Working Width: 190cm, Cam Looms, Model, 1661, 12 Cams. 4 Prefeeders Per Loom Cloth Roller / Warp Beams, 1.5 Per Loom Drop Wires / Heddles, 5000 Per Loom Electronic Take up. Condition, Running. Looms As New.

31 Reference: 9186 Cost: 0 Terms: SEE -50 x Picanol OMNI PLUS-X Year, Working Width 190 Double Nozzle STAUBLI Cam x Prefeeders Per Loom Electronic Winding Electronic let-off Server motor 1:1.5 warp beams 1:1.5 Cloth Rollers Location: China All Looms Running Price: Cnf Euro:27, Reference: 9206 Cost: 0 Terms: SEE SETS PICANOL DELTA AİR WEAVİNG MACHİNES, MODELS, 24 SETS 1.90 MT WİTH CAM ECCENTRİC, 5 SETS 2.50 MT ECCENTRİC, 5 SETS 2.50 MT ARMÜLLÜ, HEPSİ 2 RENK KAPASİTELİ, 1.5 FABRİC BEAM, 1.5 WARP BEAM, 2 SCARF FEEDİNG, 5000 LAM Price: EUR / EACH Reference: 9367 Cost: 0 Terms: SEE -15 x PICANOL OMNI 2 colour STAUBLI 2580 RS ( 10 PCS 15 LEVER 5 PCS 12 LEVER ) WIDTH 7X220cm-8X190cm YEAR FRAME 2 BEAM (1000 MM) 2 WEFT ACCUMULATOR IRO 6000 DROPPERS & HEDDLES machine is working delivery time = ready PRICE = cnf.

32 Reference: 9366 Cost: 0 Terms: SEE -Nos. 15) PICANOL Omni Air-jet Looms: Year: Model: OMNI-4-R Width: 190cm 4-Color STAUBLI Dobby type 2580C 16 levers installed, ETU, ELO, TSF, PRA, 380V-50Hz, speed 740rpm with speed variator, equipped with 4 weft accumulators IRO 1131C, 16 heald frames of verbrugge, 1 blue reed, 1.5 warp beams Ø 1000mm & 1.5 cloth rolls, 6 warp stop motion bars, 5000 healds & 5000 droppers, double warp tension rolls. ALL these additional Accessories included: blue reeds, verbrugge heald frames, - 1 checking table, - 3 quick style change, - 1 beam trolley, - 6 warp beams Ø 1000mm, healds, droppers, - 15 weft filling censors & prints, - 2 accumulators, - 1 speed variator, - 1 cleaning compressor & other loom spares. Reference: 9368 Cost: 0 Terms: SEE -34 X PICANOL DELTA AIR JET YEAR 5 X 190 WIDTH CAM MATI, 5 X 2.50 WIDTH CAM MATI, 5 X 250 WIDTH DOBBY, 2 COLOUR 1.5 BEAM 1.5 CLOTH ROLLER 2 WEFT ACCUMULATOR 5000 DROPPER & HEDDLES MACHINE IS WORKING MACHINE IS WORKING Location = turkey delivery time = ready PRICE = 8500 cnf

33 Reference: 9371 Cost: 0 Terms: SEE Picanol OMNI-Plus YOC 2002 Width 190 cm Staubli 1661/ elec-let off; ele- take up 10 pcsof heald frames 2 nozzels, 2 weft feeders beam/cloth roller 1.5 Running on the mill floor CNF USD 22,900 by T/T. Reference: 8138 Cost: 0 Terms: - PICANOL PAT2-R-A LOOM - 3 pcs Year: 1990 working width: 190 cm for beams diameter 600 mm Staubli 2580 dobby with 16 hooks Looms with IWF harness PICANOL PAT2-R-A LOOM - 5 pcs Year: 1990 working width: 190 cm for beams diameter 1000 mm Staubli 2580 dobby with 16 hooks Looms with IWF harness Please consider: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!! Reference: 8692 Cost: 0 Terms: - -PICANOL PAT2-R-A LOOM - 3 pcs Year: 1990 working width: 190 cm for beams diameter 600 mm Staubli 2580 dobby with 16 hooks Looms with IWF harness PICANOL PAT2-R-A LOOM - 5 pcs Year: 1990 working width: 190 cm for beams diameter 1000 mm Staubli 2580 dobby with 16 hooks Looms with IWF harness

34 Reference: 9597 Cost: 0 Terms: - -6 Looms Picanol OMNI PLUS ww 3400 mm, 2160 ends, ( 60 ends per cm) Year of construction:11/ Jacquards STAUBLI LX 1600 Accessories each loom: 2 Beams - 3 cloth rollers - 4 weft accumulators - drop wires 1 Compressor model ATLAS GA75 Reference: 9390 Cost: 0 Terms: - -OMNI-4-R-190cm Picanol 24 sets OMNI 190cm e-dobby Staubli / #2871 Max.16, equipped over 12 8 Dropper Box Max.6, equipped over 5 Bars. 1.5 on the m/c 1.5 4,000 running ELO/ETU 380/60 immed. US$20,500-/set C&F C:5% for yom 2000 with #2871,

35 Reference: 9391 Cost: 0 Terms: SEE -OMNI-4-R-190cm Picanol 24 sets OMNI 190cm e-dobby Staubli / #2861 Max.16, equipped over 12 8 Dropper Box Max.6, equipped over 5 Bars. 1.5 with Batching Motion no 4,000 stop in floor after running ELO/ETU 380/60 immed. US$19,500-/set C&F C:5% for yom 1999 with #2861. Reference: 8948 Cost: 0 Terms: x 2004 Omni-Plus190 width 2color cam,electronic let-off electronic let off two feeding device 6 heald 1:1.5 beam 1:1.5Roll cloth stick 5000harness wire 25 x 2005 OMNI-PLUS width 2color cam Electronic let-off electronic let off two feeding device 6 heald 1:1.5 beam 1:1.5Roll cloth stick 5000harness wire Reference: 8136 Cost: 0 Terms: SEE Revized PICANOL DELTA air jet looms - 10 pcs cam type, working width: 1855 mm 4 healds 2 main nozzles year 1994 only 5 available now: Price FCA EUR for all Please consider: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

36 Reference: 9587 Cost: 0 Terms: SEE -No Split Sale possible (40) OMP P, Airjet Looms, 220 cm, Cam Model staubli-1661 Brand : Picanol Model : OMP P Year : 2008 Working width: 220cm 2 colors 2 feeders Feeders model name: iro Sheding motion type: cam Model name: staubli lever 8hook 6 equipped harness frame Warp stop motion: yes 6 bars Speed: 800rpm/min Voltage / hz: 380/50 Option: pfl/etu Warp beam dia: 1000 mm Quantity of beam: 1.5 Quantity of cloth roll: 1.5 Heddles & dropper: 5,000pcs Condition: Running Location: Vietnam Quantity: 40sets Tatol: 1,980, CNF ASIA USED PICANOL AIR JET LOOM MACHINE COMPLETE FOR DENNIM 40Sets Air Jet Loom are serinumber as below Technical speification of machine : 1. Power( Voltage) : 380 V 2. Frequeny : 50 HZ 3. Drawing in width : 2200 mm 4. Speed : 900 rpm/min. 5. Shedding Motion Cam 8 frame Staubli Type : Detail spare part for 40sets weaving loom as below: 1. Temples: 02 sets 2. Harness frame : 6 sets 3. Under motion for dropp : 06 sets 4. Heddles type Tex, 11 inch : 5000pcs. 5. Lamen ( Drop wires) : 5000 pcs. 6. Elsy( Elsy) : 02 sets. 7. Weft cutting : 02sets. 8. Bobbin waste Selvage ( RH): 01 set. 9. Rotative split+2 bobin : 02 sets. 10. Warp beam 220 cm, flanges 1000mm : 1,5 sets. 11. Cloth roll: 1,5 sets. 14. Prewinder Iro 2231 X2 completed :02 sets. 12. Keyboard Display screen : 01 sets. 13. Support grob :02 sets. 14/ Cam : 6 pcs/each. 15/ Fabric roller PBM3-220 : 01 sets II/ Compressor for weaving loom : 1. Cooper Turbo Compressor TA2020/50/400/125) : 02 sets Brand: CAMER- USA, Year: 2008 Seriumber : 16183, Power : 380 v, 50Hz

37 Main motor : 40HP, 2900 rpm/min Circulation: 50m3/ min Pressure : 7 Bar. Tuabin : rpm/ min, 02 pressure offer. Star system slow, stanby running Controller system center, safty, automatic. - Compresser Tank 4m3 : 02 sets 2. Dryer PDG 6000: 02 sets Brand: PAKER HIROSS Italia, Year : 2008 Pressure gauge:7 Bar, normal temperature : 35C Pressure gauge max : 12 Bar, Temperature max : 60 C Gas head : R407C Circulation: 60 m3/min Power consumtion : 12.5 Kw 3. System flower Liang ken 80RT- China : - Model : LCT 80RT: 01 sets, Year : 2008 Moto : 2HP - Automic provide chemical HANA BLACKSTE, Model BL : 01 sets Circulartion: 1,5 lit / min. Reference: 9080 Cost: 0 Terms: - 9 PICANOL AIR JET LOOMS with "Sumo-Motors "- Type OMNI PLUS F-4R-220, YOC 2001, of 220 cms., 4 colors selector, with Staubli dobby type 2871 of 16/14 shafts, SUMO motor, Quick style change, with Formia Nova Batching Motion. Each equipped with: 4 IRO 1131 weft accumulators, 10 heald, 2 Warp Beams of 1000 mm., Diameter flange, Heddles Droppers. Price each CFR -EUR Delivery: Inmediately. Location- SPAIN. Reference: 8862 Cost: 0 Terms: SEE -2 PICANOL OMNI airjet weaving machines OMNI-4F-J, width 2200 mm, year 1996, each with electronic Jacquard machine STAUBLI CX880 format 1408 equiped 1200 hooks, modules M5 (2005), harnesses from repeats each 1200 ends - width 2200 mm, without gantry, no clothroll-drive, no batching motion. Price: Euro /--each, CNF

Machinery Listings. Weaving Picanol. Airjet. Reference: 7256 Cost: 0 Terms: -

Machinery Listings. Weaving Picanol. Airjet. Reference: 7256 Cost: 0 Terms: - Machinery Listings Weaving Picanol Airjet Finatex International: Please ask for details at: marketing@finatexinternational.com Reference: 7224 Cost: 0 Terms: - Please consider: If prices or commissions

More information

- Price GS900 Euro each one includin. Please consider N 04 Smit Textile loom type G6300 JUST SOLD

- Price GS900 Euro each one includin. Please consider N 04 Smit Textile loom type G6300 JUST SOLD Machinery Listings Warping Smit Dobby Finatex International: Please ask for details at: marketing@finatexinternational.com Reference: 8224 Cost: 0 Terms: SEE http://finatexinternational.com/pictures/8224.zip

More information

PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.

PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection. Machinery Listings Complete Plant Multiple Waterjet Finatex International: Please ask for details at: marketing@finatexinternational.com Reference: 14703 Cost: 0 Terms: - -21 Full factory Daewon T.F.O

More information

ACCESSORIES: 36 Cloth roll, 36 beams, headless and droppers, 384 frames, 96 feeders.

ACCESSORIES: 36 Cloth roll, 36 beams, headless and droppers, 384 frames, 96 feeders. Machinery Listings Complete Plant Picanol Dobby Finatex International: Please ask for details at: marketing@finatexinternational.com Reference: 13320 Cost: 0 Terms: - http://finatexinternational.com/pictures/13320.zip

More information

DESCRIPTI ON. Pictures not available 1 THEMA 11 serie 103 Jacquard elettron. BONAS BLJ 2688 SerialN.B2340 Controller Bonas S200

DESCRIPTI ON. Pictures not available 1 THEMA 11 serie 103 Jacquard elettron. BONAS BLJ 2688 SerialN.B2340 Controller Bonas S200 Machinery Listings Weaving Somet Jacquard Finatex International: Please ask for details at: marketing@finatexinternational.com Reference: 7248 Cost: 0 Terms: SEE http://finatexinternational.com/pictures/7248.zip

More information

We offer subject to prior sale:

We offer subject to prior sale: textile machinery, trade, spare parts, evaluations & technical service NEWSLETTER 41 2017 Weaving Machines We offer subject to prior sale: HOTTEST FALL OFFER Item#005345 2 DORNIER JACQUARD LOOMS - HTVS

More information

Pictures not available Dornier HTV S8 SD

Pictures not available Dornier HTV S8 SD Machinery Listings Weaving Dornier Dobby Finatex International: Please ask for details at: marketing@finatexinternational.com Reference: 6526 Cost: 17,000 Terms: EACH, EURO, FOT, 1 DORNIER HTV4/SD - 210

More information

Pictures not available 1 SECTIONAL WARPER BENNINGER BEN-SUPERTRONIC WIDTH 2.60M YEAR 1995 Details: Beams Diameter 1000mm Creel with 540 spindles

Pictures not available 1 SECTIONAL WARPER BENNINGER BEN-SUPERTRONIC WIDTH 2.60M YEAR 1995 Details: Beams Diameter 1000mm Creel with 540 spindles Machinery Listings Warping Benninger Finatex International: Please ask for details at: marketing@finatexinternational.com Reference: 7656 Cost: 0 Terms: - 1 SECTIAL WARPER BENNINGER BEN-SUPERTRIC WIDTH

More information

The machinery is all from well known and respected manufacturers and is in good condition,having been professionally maintained.

The machinery is all from well known and respected manufacturers and is in good condition,having been professionally maintained. Machinery Listings Complete airjet Plant Multiple Terry Finatex International: Please ask for details at: marketing@finatexinternational.com Reference: 11743 Cost: 0 Terms: - -This is a unique oppor tunity

More information

Newsletter 30/12 - Item 4845 Complete Weaving Mill

Newsletter 30/12 - Item 4845 Complete Weaving Mill Newsletter 30/12 - Item 4845 Complete Weaving Mill We are exclusively offering, subject to prior sale: 1 Complete Weaving Mill from Schengen Europe with 80 looms (Airjet and Rapier looms), Warp preparation

More information

PETTIT TEXTILE MACHINERY Second Hand Machinery Bought and Sold

PETTIT TEXTILE MACHINERY Second Hand Machinery Bought and Sold PETTIT TEXTILE MACHINERY Second Hand Machinery Bought and Sold 20 Van de Wiele VMM22-175 Weaving Machines, Staubli 2690 Electronic Dobby, Either 2 pile or 3 pile stations and 2 backing stations. IRO Weft

More information

Pictures not available EURO, CNF NO. 04 SETS COTTON CARDS C50 RIETER YEAR : 1995

Pictures not available EURO, CNF NO. 04 SETS COTTON CARDS C50 RIETER YEAR : 1995 Machinery Listings Carding Rieter cards Revized Ref. no. 6433-2 X Rieter C4 Cards Price : Euro 14.000 CNF Sold Ref. no. 6434-4 X Rieter C4 cards Price : Euro14.000 CNF/each available Finatex International:

More information

Bhagwati Traders.

Bhagwati Traders. +91-8071682245 Bhagwati Traders https://www.indiamart.com/bhagwati-trader-mumbai/pdf1.html We are a leading Manufacturer, Wholesaler, Exporter, Distributor, Importer And Trader of Textile Clutches, Roller

More information

No of Weft Feed. Feeds. Laser. Laser. IRO Laser. Laser. Laser. Laser. Laser 59 THEY ARE VERY CLEAN AND IN EXCELLENT WORKING CONDITION

No of Weft Feed. Feeds. Laser. Laser. IRO Laser. Laser. Laser. Laser. Laser 59 THEY ARE VERY CLEAN AND IN EXCELLENT WORKING CONDITION Macart Textiles (Machinery) Ltd, Macart House, Farnham Road, Bradford, BD7 3JG United Kingdom Website : www.macart.com E-mail : philip@macart.com Tel : 00 44 1274 525921 MACHINE REF: LOO263 DESCRIPTION:

More information

Based on our General Terms of Sale and subject to prior sale we offer the following machines:

Based on our General Terms of Sale and subject to prior sale we offer the following machines: Offers - Weaving Offer No. 3600-0 Based on our General Terms of Sale and subject to prior sale we offer the following machines: 1 Babcock 5-Zone Horizontal Stenter With horizontal chain guide in steel

More information

Please consider: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

Please consider: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!! Machinery Listings Yarn Processing Rieter Ring Frame 04 RIETER Ringframes Model: G 5/2 YOC 1993 No.of Spindle / machine: 1020 Ring diameter: 40 mm Gauge: 70 mm Drafting: SKF Autodoffing Linked with: Autoconer

More information

R9000 Rapier Weaving Machine

R9000 Rapier Weaving Machine R9000 Rapier Weaving Machine With our new R9000 quality and affordability finally go hand in hand. The best balance between cost and perk that you can find on the market is now available. The R9000 is

More information

Pictures not available 1 WARPING MACHINE: SECTIONAL BENNINGER SUPERTRONIC W:3800 YOC CREEL BENNINGER 800 BOBBINS YOC 1990

Pictures not available 1 WARPING MACHINE: SECTIONAL BENNINGER SUPERTRONIC W:3800 YOC CREEL BENNINGER 800 BOBBINS YOC 1990 Machinery Listings Warping Benninger Finatex International: Please ask for details at: marketing@finatexinternational.com Reference: 6116 Cost: 0 Terms: - 1 WARPING MACHINE: SECTIAL BENNINGER SUPERTRIC

More information

SUNTECH Machine Which Suitable for Weaving Factory

SUNTECH Machine Which Suitable for Weaving Factory SUNTECH Machine Which Suitable for Weaving Factory Loom Take-up Machine Loom Take-up Machine(ST-LTM-01) Speed Fabric Width Batching Diameter max. Remark synchronized with weaving machine-standard 0.1.15m/min

More information

Please consider: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!!

Please consider: If prices or commissions are mentioned, they do not include commission for us or any agents. We kept the message original!!! Machinery Listings Carding Marzoli cards MARZOLI C40 1972 Finatex International: Please ask for details at: marketing@finatexinternational.com Reference: 7435 Cost: 0 Terms: - Please consider: If prices

More information

INSTRUCTION MANUAL_1219_ENGLISH SUPER ELF X3. Operating Instructions for DORNIER looms. Robustness Reliability Quality Productivity Versatility

INSTRUCTION MANUAL_1219_ENGLISH SUPER ELF X3. Operating Instructions for DORNIER looms. Robustness Reliability Quality Productivity Versatility INSTRUCTION MANUAL_1219_ENGLISH SUPER ELF X3 Operating Instructions for DORNIER looms Robustness Reliability Quality Productivity Versatility WARNING! - Condensation could form on the Weft Feeder when

More information

SUPERIOR FABRIC QUALITY

SUPERIOR FABRIC QUALITY 5 4 3 1 7 6 2 UNPARALLELED COST SAVINGS AND PERFORMANCES SUPERIOR FABRIC QUALITY OUTSTANDING USER-EXPERIENCE 1 Energy Saving The optimization of the machine main mechanical components and lubrication system

More information

USER'S GUIDE and Spare Parts Drawings GENERIC APPLICATIONS

USER'S GUIDE and Spare Parts Drawings GENERIC APPLICATIONS Super ELF-X2 USER'S GUIDE and Spare Parts Drawings GENERIC APPLICATIONS SUPER ELF X2 WARNING! - Condensation could form on the Weft Feeder when it is moved from the cold environment of the warehouse to

More information

India s leading manufacturer of ADVANCED TEXTILE WEAVING MACHINES

India s leading manufacturer of ADVANCED TEXTILE WEAVING MACHINES India s leading manufacturer of ADVANCED TEXTILE WEAVING MACHINES We change the way you look. The clothes that you weave get a unique identity by our work. We believe that cost is long forgotten and only

More information

PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.

PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection. Machinery Listings Carding Thibeau Finatex International: Please ask for details at: marketing@finatexinternational.com Reference: 4614 Cost: 160,000 Terms: EACH, http://finatexinternational.com/pictures/4614.zip

More information

Work Professional with professional machines

Work Professional with professional machines QUTATION Computer Panel Saw Date : 2015/04/02 Specialized in Panel Saw from SOSN Model : SOSN-338 Computer Panel Saw 338 means Length of cutting.cutting length is 3800 mm Machine Specification : CAPACITY

More information

MODEL GTA. Second Generation recently redesigned THE MOST ADVANCED NET MACHINES IN THE WORLD. Model GTA type shown.

MODEL GTA. Second Generation recently redesigned THE MOST ADVANCED NET MACHINES IN THE WORLD. Model GTA type shown. THE MOST ADVANCED NET MACHINES IN THE WORLD Second Generation MODEL GTA Model GTA type 50-10 shown. 50-10 recently redesigned 20mm to 50mm pitch Model GTA nylon and polyethylene twine Our 2 nd generation

More information

LSL630 REPLACEMENT PARTS OF CIRCULAR LOOMS. UPPER HEDDLE BELT (230 X 98 X 20) Ref : LSL Ref : LSL

LSL630 REPLACEMENT PARTS OF CIRCULAR LOOMS. UPPER HEDDLE BELT (230 X 98 X 20) Ref : LSL Ref : LSL 1 UPPER HEDDLE BELT (230 X 98 X 20) 0731 07 0734 07 2 LOWER HEDDLE BELT (485 X 98 X 20) 0731 19 0734 19 3 COMPLETE - SHUTTLE BODY (LSL620)SHUTTLE SKID TYPE WITH SIDE FLANGE ASSLY. (35 X 38 X 218) 5 SHUTTLE

More information

PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.

PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection. Machinery Listings Complete Plant Benninger Finatex International: Please ask for details at: marketing@finatexinternational.com Reference: 10775 Cost: 0 Terms: SEE http://finatexinternational.com/pictures/10775.zip

More information

ELECTRONIC CONE WINDING MACHINE FOR CONTINUOUS BULKING AND SHRINKAGE MOD. VA-2

ELECTRONIC CONE WINDING MACHINE FOR CONTINUOUS BULKING AND SHRINKAGE MOD. VA-2 ELECTRONIC CONE WINDING MACHINE FOR CONTINUOUS BULKING AND SHRINKAGE MOD. VA-2 Designed for continuous bulking and shrinkage ELECTRONIC CONE WINDING MACHINE mod. VA-2 Designed for continuous bulking and

More information

ELECTRONIC DIRECT DRIVE LOCKSTITCH BUTTON HOLER

ELECTRONIC DIRECT DRIVE LOCKSTITCH BUTTON HOLER HE-800B PARTS BOOK ELECTRONIC DIRECT DRIVE LOCKSTITCH BUTTON HOLER Parts Navigation http://partsbook.brother.co.jp/partsnavi/jpn/ The latest parts information, refer to the Parts Navigation. http://partsbook.brother.co.jp/partsnavi/eng/

More information

SECTIONAL WARPING MACHINE SERVOMECH-100

SECTIONAL WARPING MACHINE SERVOMECH-100 SPECIFICATIONS SECTIONAL WARPING MACHINE SERVOMECH-100 1.0 TECHNICAL SPECIFICATIONS: WORKING WIDTH : 2200mm to 3600 mm DRUM TYPE : Metallic Drum, Dynamically Balanced DRUM CONE HEIGHT : Fixed - 11 0 or

More information

Ceram 4-way Pneumatic Directional Control Valve Tough enough to survive, no matter where in the world you send it.

Ceram 4-way Pneumatic Directional Control Valve Tough enough to survive, no matter where in the world you send it. 2 Features Valve options Accessories Ceram 4-way Pneumatic Directional Control Valve Tough enough to survive, no matter where in the world you send it. The secret s a ceramic seal. Inside the valve a pair

More information

Dye House, Weaving Plant and Sundry Clearance Auction

Dye House, Weaving Plant and Sundry Clearance Auction Dye House, Weaving Plant and Sundry Clearance Auction Auction Sale to be held on the Site Unit 2C, 1-7 Unwins Bridge Road & 63 Turella Street Turella NSW Onsite 10:00am - Tuesday 4th December 2018 Inspection:

More information

S-6200A PARTS BOOK 1 SINGLE NEEDLE STRAIGHT LOCK STITCHER WITH THREAD TRIMMER. Parts Navigation.

S-6200A PARTS BOOK 1 SINGLE NEEDLE STRAIGHT LOCK STITCHER WITH THREAD TRIMMER. Parts Navigation. S-6200A PARTS BOOK 1 SINGLE NEEDLE STRAIGHT LOCK STITCHER WITH THREAD TRIMMER Parts Navigation The latest parts information, refer to the Parts Navigation. http://partsbook.brother.co.jp/partsnavi/jpn/

More information

PARTS CATALOGUE FOR COMPUTERIZED SEWING MACHINE

PARTS CATALOGUE FOR COMPUTERIZED SEWING MACHINE PARTS CATALOGUE FOR COMPUTERIZED SEWING MACHINE PC-8500 SUPER GALAXIE 2100 1. 1999. CONTENTS (1) PRINCIPAL PARTS... 2 (2) UPPER SHAFT AND NEEDLE BAR... 4 (3) FEED MECHANISM... 8 (4) ROTARY HOOK, THREAD

More information

Catalogue Commercial vacuum cleaners Scrubber/dryers Single discs

Catalogue Commercial vacuum cleaners Scrubber/dryers Single discs Catalogue 2012 Commercial vacuum cleaners Scrubber/dryers Single discs WHY VIPER VIPER provides cleaning machines for professional use. Our products offers you the following features and benefits: - Ease

More information

TOP SMART intelligent position monitor:

TOP SMART intelligent position monitor: TOP SMART intelligent position monitor: Air Torque also manufacture the Top smart intrinsically safe compact valve position monitor with integrated diagnostics, self calibrating limit switches, integrated

More information

LENO-4 LENO-4 REPLACEMENT PARTS OF CIRCULAR LOOMS

LENO-4 LENO-4 REPLACEMENT PARTS OF CIRCULAR LOOMS 1 SWITCHING MECHANISM 2 UPPER HEDDLE BELT (260 X 92 X 2) LENO4 0732 08 3 LOWER HEDDLE BELT (515 X 98 X 2) LENO4 0732 17 5 SHUTTLE BODY-P LENO4 5996 15 7 SHUTTLE BODY LENO4 9968 17 LENO4 9994 18 4 COMPLETE

More information

Die cutting and stripping machine with hot foil stamping. model Brausse SIGNA 1050F Hybrid

Die cutting and stripping machine with hot foil stamping. model Brausse SIGNA 1050F Hybrid Die cutting and stripping machine with hot foil stamping model Brausse SIGNA 1050F Hybrid All machines installed by Brausse Europe will have the VinTechMa label. www.vintechma.com 1 Highlights of all Brausse

More information

Stationary Electric Air Compressors

Stationary Electric Air Compressors Stationary Electric Air Compressors Ref #B1 ONE (1) Refurbished Electric Driven High Pressure Air Compressor Skid Package CAE Custom Package Unit: C-2022 XCAE825/350IR-E Year: 2006 Hours: Under 200 hrs

More information

EDC DRY CLAW VACUUM PUMPS

EDC DRY CLAW VACUUM PUMPS edwardsvacuum.com EDC DRY CLAW VACUUM PUMPS INNOVATION AND RELIABILITY Edwards EDC range is a new generation of robust single stage dry claw vacuum pumps The new range of our EDC dry claw pumps features

More information

PARTS CATALOGUE FOR KH-970 KNITTING MACHINE. Note: Parts marked * are new for KH-970 And not interchangeable with other models.

PARTS CATALOGUE FOR KH-970 KNITTING MACHINE. Note: Parts marked * are new for KH-970 And not interchangeable with other models. PARTS CATALOGUE FOR KH-970 KNITTING MACHINE Note: Parts marked * are new for KH-970 And not interchangeable with other models. PARTS FOR CARRIAGE UPPER PART Ref. No. Parts No. Description Revised Q ty

More information

SPECIFICATIONS SECTIONAL WARPING MACHINE - PLCTECH-110

SPECIFICATIONS SECTIONAL WARPING MACHINE - PLCTECH-110 SPECIFICATIONS SECTIONAL WARPING MACHINE - PLCTECH-110 1.0 TECHNICAL SPECIFICATIONS: WORKING WIDTH : 2200mm to 4000 mm DRUM TYPE : Metallic Drum, Dynamically Balanced. CONE HEIGHT : Fixed,( 11% or 9% or

More information

Summary of Key Issues

Summary of Key Issues Summary of Key Issues The Manufacturing Production Index (MPI) in April 2017 shrank by 1.7 percent from last month, but shrank by 0.5 percent from the same period of last year. The major shrinking industries

More information

TIG. Product Catalogue 1.0 / V1.

TIG. Product Catalogue 1.0 / V1. T E C H N O L O G Y F O R T H E W E L D E R S W O R L D. TIG Product Catalogue 1.0 / V1 www.binzel-abicor.com Content TIG-Welding Torches TIG-Welding Torches ABITIG air- and liquid-cooled Page 04 05 ABITIG

More information

MINING ELECTRIC MOTORS 3KTCR, 4KTCR, 5KTCR

MINING ELECTRIC MOTORS 3KTCR, 4KTCR, 5KTCR MINING ELECTRIC MOTORS 3KTCR, 4KTCR, 5KTCR Explosion protection Certificate of Conformity: Frame size 71 and 160 Frame size 80, 90, 100, 112, 132 Frame size 180, 200, 225 Frame size 250 Frame size 280

More information

Global Axial Turbocompressor Market Research Report 2016

Global Axial Turbocompressor Market Research Report 2016 Published on Market Research Reports Inc. (https://www.marketresearchreports.com) Home > Global Axial Turbocompressor Market Research Report 2016 Global Axial Turbocompressor Market Research Report 2016

More information

HE-800A PARTS BOOK ELECTRONIC LOCKSTITCH BUTTON HOLDER

HE-800A PARTS BOOK ELECTRONIC LOCKSTITCH BUTTON HOLDER HE-800A PARTS BOOK ELECTRONIC LOCKSTITCH BUTTON HOLDER Parts Navigation http://partsbook.brother.co.jp/partsnavi/jpn/ The latest parts information, refer to the Parts Navigation. http://partsbook.brother.co.jp/partsnavi/eng/

More information

Textile Per Capita Consumption

Textile Per Capita Consumption November 2017 Textile Per Capita Consumption 2005-2022 Part 1: Lower middle income countries CHF300.- Table of Contents Preface... 4 Sources... 5 Definitions... 6 Charts... 7 Executive Summary... 9 Country

More information

The Convergence of Advanced Technology and Tradition

The Convergence of Advanced Technology and Tradition The Convergence of Advanced Technology and Tradition The new FL200 was born out of Toyota s unending pursuit of the ideal roving frame, one that enables anyone to spin high-quality roving at high speeds,

More information

Home Sewing Machine PARTS REFERENCE LIST. MODEL: NC21-S2, S3 Model CS8000 Series CS8100 Series

Home Sewing Machine PARTS REFERENCE LIST. MODEL: NC21-S2, S3 Model CS8000 Series CS8100 Series Home Sewing Machine PARTS REFERENCE LIST MODEL: NC21-S2, S3 Model CS8000 Series CS8100 Series CONTENTS (1) PRINCIPAL PARTS... 2 (2) UPPER SHAFT / NEEDLE BAR, PRESSER MECHANISM... 6 (3) FEED, ROTARY HOOK

More information

MINING ELECTRIC MOTORS 3KTCR AND 4KTCR

MINING ELECTRIC MOTORS 3KTCR AND 4KTCR MINING ELECTRIC MOTORS 3KTCR AND 4KTCR Explosion protection Certificate of Conformity: Frame size 71 and 160 Frame size 80, 90, 100, 112, 132 Frame size 180, 200, 225 Frame size 250 Frame size 280 Frame

More information

Spares Suitable for Heidelberg S Series Machines

Spares Suitable for Heidelberg S Series Machines 23360 Screw Driver 515 mm. Total Length 23362 Swing Gripper Side Spring 23363 Clip For Coil Spring 20104 Chain Delivery Gripper 20109 Chain Delivery Gripper Clamp Old Type 20110 Chain Delivery Gripper

More information

FORGED STAINLESS STEEL Rack And Pinion Actuator S Series

FORGED STAINLESS STEEL Rack And Pinion Actuator S Series FORGED STAINLESS STEEL Rack And Pinion Actuator S Series The Air Torque S Series stainless steel actuators are a corrosion resistant rack and pinion actuator particularly engineered for corrosive environments

More information

TEXTILE WORLD NS-EN ISO 9001 : 2008/ ISO CERTIFIED COMPANY. .Specialized in Grey, R.F.D. & Processed Fabrics For Garments

TEXTILE WORLD NS-EN ISO 9001 : 2008/ ISO CERTIFIED COMPANY. .Specialized in Grey, R.F.D. & Processed Fabrics For Garments Dear Sir/Madam, We are attaching the Quality List which we are doing Grey as well as Process goods for garments & bedsheet. If you have any inquiry regarding any Fabric. Kindly contact us on our email

More information

Terra TM 4300 B. PARTS LIST Advance model: (1)

Terra TM 4300 B. PARTS LIST Advance model: (1) Terra TM 4300 B PARTS LIST Advance model: 9084317010 2009-06 TABLE OF CONTENTS Terra 4300 B 1 DESCRIPTION PLAN GENERAL VIEW 2-3 CHASSIS ASSEMBLY 4-7 BONNET SYSTEM 8-9 MAIN BROOM ASSEMBLY 10-11 RIGHT SIDE

More information

Z-8550A Z-8560A PARTS BOOK ELECTRONIC DIRECT DRIVE ZIGZAG LOCK STITCHER ELECTRONIC DIRECT DRIVE ZIGZAG LOCK STITCHER WITH THREAD TRIMMER

Z-8550A Z-8560A PARTS BOOK ELECTRONIC DIRECT DRIVE ZIGZAG LOCK STITCHER ELECTRONIC DIRECT DRIVE ZIGZAG LOCK STITCHER WITH THREAD TRIMMER Z-80A Z-860A PARTS BOOK ELECTRONIC DIRECT DRIVE ZIGZAG LOCK STITCHER ELECTRONIC DIRECT DRIVE ZIGZAG LOCK STITCHER WITH THREAD TRIMMER Parts Navigation http://partsbook.brother.co.jp/partsnavi/jpn/ The

More information

AEEB AEVB LOW VOLTAGE SERIES Three-Phase Squirrel Cage Induction Motor Conforming to SS530 (Occasional Use) Conforming to IE1

AEEB AEVB LOW VOLTAGE SERIES Three-Phase Squirrel Cage Induction Motor Conforming to SS530 (Occasional Use) Conforming to IE1 AEEB AEVB LOW VOLTAGE SERIES Three-Phase Squirrel Cage Induction Motor Conforming to SS530 (Occasional Use) Conforming to IE1 STANDARD AND SPECIFICATION Performance: Meet the requirement of Singapore standard

More information

CONTENTS. Rotor spindles Beater spindles Bearing units

CONTENTS. Rotor spindles Beater spindles Bearing units CONTENTS Spindle bearing units Spindle bottom parts for spinning and twisting spindles Spindle lubricating apparatus with accessories Contact roll assemblies for tangential belt drives Tension pulleys

More information

DIANA 16 SHAFT COMPUTER-DOBBY

DIANA 16 SHAFT COMPUTER-DOBBY DIANA 16 SHAFT COMPUTER-DOBBY 2120-1624 1573 Savoie C. P. 4 Plessisville, Qc. G6L 2Y6 TEL: 819-362-7207 FAX: 819-362-2045 www.leclerclooms.com info@leclerclooms.com Loom Prepared by: Inspected by: Date:

More information

SHUTTER D GARAGE & ROLLER SHUTTER

SHUTTER D GARAGE & ROLLER SHUTTER GARAGE & SHUTTER D GARAGE & ROLLER SHUTTER 2 DOORS ROLLER OORS VER is the abbreviation for versatile. It is the optimal solution for most small to medium sized overhead and sectional residential garage

More information

Machinery Listings. Complete Plant Multiple. Ring Frame. Finatex International: Please ask for details at:

Machinery Listings. Complete Plant Multiple. Ring Frame. Finatex International: Please ask for details at: Machinery Listings Complete Plant Multiple Ring Frame Finatex International: Please ask for details at: marketing@finatexinternational.com Reference: 10879 Cost: 0 Terms: - Pictures not available 1 RING

More information

General Specification

General Specification General Specification OF NV-100mmSG (Mod.2) Single Screw Extruder Freesia Macross Corporation April 2009 1. Type General purpose single screw extruder 2. Capacity 300-500 kg/h (ABS pellet) 3. Dimension

More information

Metal Roof Tile Production Line «Adamante» (19 mill stands)

Metal Roof Tile Production Line «Adamante» (19 mill stands) Ruscana Engineering Group Russia, 142143, Moscow region, Podolsk city, village Bykovo, Centralnaya Street, 6 tel./fax: (499) 400-40-63, tel.: (495) 660-16-25, 721-69-91 www.ruscana-engineering.com E-mail:

More information

MAIL SERVICE 2 Wheeler Domestic Europe, Emerging Markets & Importers

MAIL SERVICE 2 Wheeler Domestic Europe, Emerging Markets & Importers MAIL SERVICE 2 Wheeler Domestic Europe, Emerging Markets & Importers Pontedera, January 2018 1. THE PIAGGIO GROUP THE PIAGGIO GROUP The Piaggio Group is the largest European manufacturer of two-wheel motor

More information

TABLE OF CONTENTS S-4000 ISBH+I SM

TABLE OF CONTENTS S-4000 ISBH+I SM TABLE OF CONTENTS Needle Bar... Clamping... Clamping Angle... Thread Trimmer... Shifter Mechanism... Feed Mechanism... Looper Mechanism... Base... Bite Mechanism... Thread Draw-off Mechanism... Main Cam...

More information

Xerox 82xx/83xx Wide Format Printer

Xerox 82xx/83xx Wide Format Printer January 2010 701P50536 Xerox 82xx/83xx Wide Format Printer Unwinder / Winder User Guide 2010 Xerox Corporation. All rights reserved. Xerox, the sphere of connectivity design, and Xerox 8265/8290/8365/8390

More information

GIGA SPARES ARTWORK. Instance Automatics Ltd Tel Decal Giga crane

GIGA SPARES ARTWORK. Instance Automatics Ltd Tel Decal Giga crane GIGA SPARES ARTWORK 4257.0003 Decal Giga crane 4257.0101 Plexi top Giga 4240.0185 Profile propor 185T pvc chrome/silver 4251.0105 Plexi control intelligrab 4251.0106 Plexi filter intelligrab HANDLING MONEY

More information

Conversion Kits. Version november 2016

Conversion Kits. Version november 2016 Conversion Kits Version november 2016 1. Overview Cost effectiveness Epoca I Epoca II DigitAx Epoca II SLM Delta Epoca III Epoca 04 Epoca 05 Epoca 05 2nd Gen. Era SLM 4040 HP 4040 HP-E 5040 E Unica DigitAx

More information

PLASMA. Product Catalogue 1.0/V1.

PLASMA. Product Catalogue 1.0/V1. T E C H N O L O G Y F O R T H E W E L D E R S W O R L D. PLASMA Product Catalogue 1.0/V1 www.binzel-abicor.com Content PLASMA-Cutting Torches Plasma-Cutting Torches ABIPLAS CUT air-cooled Page 04 05 ABIPLAS

More information

Machine Specification

Machine Specification Machine Specification Machine Type: 1220A Table of Contents 1220A Sandwich panel Machine Specification ----------------------------------- 3 Electrical Specification -----------------------------------------------------------------

More information

About Czarnikow. The Premier Provider of Sugar Market Services. Czarnikow has been in the sugar business since 1861

About Czarnikow. The Premier Provider of Sugar Market Services. Czarnikow has been in the sugar business since 1861 About Czarnikow The Premier Provider of Sugar Market Services Czarnikow has been in the sugar business since 1861 Czarnikow is the leading professional services company in the sugar market Czarnikow has

More information

1. Product overview Basic-Line-Module AXN Product description Basic-Line-Module AXN 4-5. Guide system Roller guide 6 Drive system Gear belt 7

1. Product overview Basic-Line-Module AXN Product description Basic-Line-Module AXN 4-5. Guide system Roller guide 6 Drive system Gear belt 7 Directory Page 1. Product overview Basic-Line-Module AXN 3 2. Product description Basic-Line-Module AXN 4-5 Guide system Roller guide 6 Drive system Gear belt 7 3. Basic-Line-Modul AXN 45-Z 8-9 AXN 65-Z

More information

Electric chain hoist PLANETA-GCH. Simple Reliable Safe. Geared limit switch. Lifting heights up to 220 m Accuracy for repetition assured.

Electric chain hoist PLANETA-GCH. Simple Reliable Safe. Geared limit switch. Lifting heights up to 220 m Accuracy for repetition assured. Electric chain hoist PLANETA-GCH Simple Reliable Safe Compact design Robust construction Simple maintenance Fast availability Modern technology Chain guidance 2-part construction to optimize maintenance

More information

TABLE OF CONTENTS. S4000 LT Omron

TABLE OF CONTENTS. S4000 LT Omron TABLE OF CONTENTS Needle Bar... 3-2 Clamping... 3-4 Thread Trimmer & Material Trimming... 3-6 Shifter Mechanism... 3-8 Feed Mechanism... 3-10 Looper Mechanism... 3-14 Base... 3-16 Bite Mechanism... 3-18

More information

Quality Products, Prompt Service, Trustful Relationships.

Quality Products, Prompt Service, Trustful Relationships. SINCE 1989 www.kmindustrialcorp.com Quality Products, Prompt Service, Trustful Relationships. KM Industrial Corporation has established itself as a trusted supplier of Electrical, Machinery and Industry

More information

Multi Function Efficient Dynamic Altitude Simulation MEDAS

Multi Function Efficient Dynamic Altitude Simulation MEDAS Multi Function Efficient Dynamic Altitude Simulation MEDAS BENEFITS A wide simulation range and extreme flexibility SIMULATE POSITIVE & NEGATIVE PRESSURE One system for positive & negative pressure Steady

More information

Brief Introduction of The Selling Gen-set

Brief Introduction of The Selling Gen-set Brief Introduction of The Selling Gen-set Ⅰ General Information The power plant started to operate on 29, Sep., 1997 and the stop operation date was 26, Jul., 2007 The gas turbine output is 37MW and steam

More information

No.1. Side approach mechanism Precise lateral contacting. Catalogue 1.1. Test Probes Test Fixtures

No.1. Side approach mechanism Precise lateral contacting. Catalogue 1.1. Test Probes Test Fixtures No.1 in testing solutions in der Prüftechnik Test Probes Test Fixtures Side approach Precise lateral contacting Catalogue 1.1 16 mm, 1 N contact force INGUN for precise lateral contacting -controlled operated

More information

Rotary Index Tables Typ TT

Rotary Index Tables Typ TT Rotary Index Tables Typ TT Going full-pitch for a good turn Passion for Automation this motto sums up our company philosophy and our overall approach toward business. Our broad product range forms the

More information

Parts List S I N G E R. Model 7350 (Model 950D2) (1)

Parts List S I N G E R. Model 7350 (Model 950D2) (1) Parts List S I N G E R Model 7350 (Model 950D2) 029190036 (1) R A Page A Page A No. Part No. Description No. Part No. Description No. Part No. Description 1 EJD6033210 Back cover 37 V60273006 Dial tension

More information

PW80 (4BCM) EUROPE,JAPAN PW80A (3RVT) OCEANIA,SOUTH AFRICA 1K4BC-300E1

PW80 (4BCM) EUROPE,JAPAN PW80A (3RVT) OCEANIA,SOUTH AFRICA 1K4BC-300E1 PW80 () EUROPE,JAPAN PW80A () OCEANIA,SOUTH AFRICA 1K4BC-300E1 ( ) PW80/PW80A PARTS CATALOGUE 2010 by Yamaha Motor Co., Ltd. 1st edition, May 2010 All rights reserved. Any reprinting or unauthorized use

More information

PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection.

PLEASE NOTE: Inspections shall only be arranged if tentative price agreements have been reached between buyer and seller, subject to inspection. Machinery Listings Calvani Mason -01 MAS model MIXICOMBER sample Card Year 2002 V 400 Hz 50 Price: on request Location: Italy Delivery: Ready Finatex International: Please ask for details at: marketing@finatexinternational.com

More information

MEDICAL SINGLE CYLINDER LB40ME - LB45ME - LB50ME - LB55ME - LB60ME

MEDICAL SINGLE CYLINDER LB40ME - LB45ME - LB50ME - LB55ME - LB60ME MEDICAL SINGLE CYLINDER LB40ME - LB45ME - LB50ME - LB55ME - LB60ME SINGLE CYLINDER LB40ME - LB45ME - LB50ME - LB55ME - LB60ME 4 YARNFINGERS UNITS Electropneumatic yarnfingers RISING DIAL UNIT Motorized

More information

S Series Technical Data...7 How to Order...8 Dimensions...8 Manifold Dimensions and Part Numbers...9

S Series Technical Data...7 How to Order...8 Dimensions...8 Manifold Dimensions and Part Numbers...9 Miniature Valve Series............................................................3-14 RB Series..................................................................................3-6 Technical Data...................................................................................3

More information

WINDER solutions. Inverter Application Software

WINDER solutions. Inverter Application Software WINDER solutions Application Software Application Software... Based on OMRON s experience in winder applications, the RX inverter offers four times faster torque control loop. In addition to this torque

More information

Price: $2, CAE Used Equipment List February 13 th, Price: $14,900. Stationary Electric Air Compressors:

Price: $2, CAE Used Equipment List February 13 th, Price: $14,900. Stationary Electric Air Compressors: CAE Used Equipment List February 13 th, 2015 Stationary Electric Air Compressors: Ref #A1 Qty 1 Curtis Duplex Compressor Curtis CVID96A9B387N 20 CFM @ 100 psi (Approximate) DUPLEX MACHINE!! Max. Pressure:

More information

FIBER GLASS INSULATING

FIBER GLASS INSULATING A NEW APPROACH TO DESIGN FOR MORE RELIABLE EQUIPMENTS FIBER GLASS INSULATING A NEW APPROACH TO DESIGN FOR MORE RELIABLE EQUIPMENTS A NEW APPROACH TO DESIGN FOR MORE RELIABLE EQUIPMENTS PRODUCTS / enamelling

More information

To, Purchase Manager SUB. : LIST OF USED MACHINES WITH SPECIFICATION

To, Purchase Manager SUB. : LIST OF USED MACHINES WITH SPECIFICATION Page - 1 To, Purchase Manager SUB. : LIST OF USED MACHINES WITH SPECIFICATION Dear Sir, We are pleased to enclose our offer for the following machines :- Draw Bench Semi Duty Twin HP 30 RPM 1500 (60' X

More information

AVL Looms Price List

AVL Looms Price List AVL Looms Price List Effective December 2017 AVL Looms, Inc 2360 Park Avenue Chico, CA 95928 530-893-4915 (phone) 800-626-9615 (toll free) 530-893-1372 (fax) www.avlusa.com Table of Contents Ordering Information...

More information

Next Generation Lubricants for the Textile Industry

Next Generation Lubricants for the Textile Industry Next Generation Lubricants for the Industry Intelligent lubricants to cut down maintenance costs and improve productivity BECHEM s Legacy Established in the year 1834, BECHEM pioneered manufacturing of

More information

Linear Torque Limiting Clutch

Linear Torque Limiting Clutch LM Series Features & Options Linear Torque Limiting Clutch Innovation Description & Operation Sankyo's LM Series offers adjustable torque limiting in any linear axis. It mounts directly to linear slide

More information

AVL Looms Price List

AVL Looms Price List AVL Looms Price List Effective June 2018 AVL Looms, Inc 2360 Park Avenue Chico, CA 95928 530-893-4915 (phone) 800-626-9615 (toll free) 530-893-1372 (fax) www.avlusa.com Table of Contents Ordering Information...

More information

UNIVERSAL AUTOMATIC MACHINE FOR WINDING STIFF AND ELASTIC RIBBON ONTO CORES, FLANGED CORES, SPOOLS AND FLAT PACKS

UNIVERSAL AUTOMATIC MACHINE FOR WINDING STIFF AND ELASTIC RIBBON ONTO CORES, FLANGED CORES, SPOOLS AND FLAT PACKS UNIVERSAL AUTOMATIC MACHINE FOR WINDING STIFF AND ELASTIC RIBBON ONTO CORES, FLANGED CORES, SPOOLS AND FLAT PACKS Fully automatic, extremely versatile machine designed to produce a variety of different

More information

Facts and figures ALLROUNDER 375 V. Vertical free-space system Clamping force: 500 kn Injection unit (acc. to EUROMAP): 100, 170, 290.

Facts and figures ALLROUNDER 375 V. Vertical free-space system Clamping force: 500 kn Injection unit (acc. to EUROMAP): 100, 170, 290. Facts and figures ALLROUNDER 375 V Vertical free-space system Clamping force: 500 kn Injection unit (acc. to EUROMAP): 100, 1, 290 www.arburg.com 375 V Installation dimensions Vertical version 1050 850

More information

High Torque Brake Motors Three Phase - Single Phase Technical Datasheets

High Torque Brake Motors Three Phase - Single Phase Technical Datasheets High Torque Brake Motors Three Phase - Single Phase Technical Datasheets EN A dynamic, strong and ambitious Group: Orange1 Holding is an international renown Group, one of the most important European manufacturers

More information

GD 1000 series. Made for ADVANCE 1/99 FORM NUMBER

GD 1000 series. Made for ADVANCE 1/99 FORM NUMBER GD 000 series Parts list for model: GD 005-0-0V: 08700 GD 00-0-0V: 08800 GDS 00-0-0V: 08900 HDS 005-0-0V: 08600 Made for ADVANCE /99 FORM NUMBER 56045 TABLE OF CONTENTS SERVICE KIT GD 005, GD 00, GDS 00

More information

LM5200 MILLING MACHINE

LM5200 MILLING MACHINE LM5200 MILLING MACHINE Linear and Gantry Milling in one machine, for X-Axis travel of up to 84 inches (2133.6 mm) and Y-Axis travel of up to 34 inches (863.6 mm). 04 2018 LM52 The Climax LM5200 Milling

More information

ANNUAL STATISTICAL SUPPLEMENT

ANNUAL STATISTICAL SUPPLEMENT ANNUAL STATISTICAL SUPPLEMENT with 2008 data 2009 Edition This Statistical Supplement has been prepared to provide a longer historical perspective for the oil demand, supply, trade, stocks, prices and

More information