GENERAL CARGO FORKLIFT TRUCKS ROBUST AND COST-EFFECTIVE

Transcription

1 LIFT TRUCKS GENERL CRGO FORKLIFT TRUCKS ROBUST ND COST-EFFECTIVE

2 FLEXIBLE CRGO HNDLING TEREX FORKLIFT TRUCKS Terex forklift trucks are part of the comprehensive Terex Port Solutions (TPS) lift truck product line including reach stackers, empty container handlers and full container handlers. Terex forklift trucks are designed for hard service and maneuverability, even in the most extreme working conditions without sacrificing safety or comfort. For the flexible handling of general cargo or containers, the different variants have lifting capacities of up to 2 t. For Roll-on/Roll-off (RoRo) applications, operators can use variants with a special low body. dvantages Excellent cargo handling performance thanks to high-performance and high lifting capacity Versatile application thanks to different load-handling attachments Simple operation thanks to ergonomic, compact design Safe, stable handling thanks to robust design with low centre of gravity Cost-effective operation thanks to modern, environmentally friendly drive technology and low maintenance costs Terex forklift trucks can be fitted with Terex forks in customerspecific dimensions, or with a variety of other load handling attachments, such as coil lifters, magnets or locking clamps. They can also be fitted with fixed or telescopic container spreaders. This means that, in addition to use in harbour terminals, the machines can also be employed in a variety of other fields, such as the steel, construction or timber industries. forklift truck handles a wide range of cargo with weights of up to 20 t The range of Terex forklift trucks Max. lifting capacity Max. lifting height 2 FDC 1 FDC FDC FDC FDC FDC FDC 20 2 Standard forks width,0 0 1, 1,30 3

3 STCKING HIGH LOD CHRTS FOR THE WHOLE RNGE EXMPLE PRODUCT DESIGNTION Terex forklift trucks offer high-speed stacking capabilities up to,0 mm with maximum capacities of up to 2 t on the fork. The load charts lead you quickly to the Terex forklift truck model that best suits your handling requirements for general and heavy project cargo. The maximum hoist load is shown in the first two digits of the three-digit model number. fdc 20 Short product name FDC ,0, FDC FDC 30 32, FDC FDC FDC,0 FDC Maximum lifting capacity in t (2) ll dimensions in mm. ll capacities in t. 4

4 EFFICIENT DRIVES, HIGH PERFORMNCE TECHNICL SPECIFICTIONS Diesel engines and transmissions for Terex forklift trucks State-of-the-art drive train Terex forklift trucks offer high handling performances and reduced operating costs thanks to their modern design and components. They combine a state-of-the-art drive train with engines and transmissions providing low fuel consumption and low exhaust emissions with powerful hydraulics and prime axle components. FDC FDC Standard engines Optional engines Volvo TD70VE Tier 3 (Stage III) 181 2, rpm 92 1,00 rpm Volvo TD71VE Tier 4i (Stage IIIB) 2,200 rpm 1,1 1,320 rpm Cummins QSB.7 Tier 3 (Stage III) Cummins QSB.7 Tier 4i (Stage IIIB) 142 2, rpm 149 2,200 rpm 930 1,00 rpm 929 1, rpm Impressive performance data The technical specifications below offer detailed information about the impressive performance of Terex reach stackers, including stacking capacities, speeds and weights. FDC 20 FDC FDC 30 Standard engines Optional engines Volvo TD70VE Tier 3 (Stage III) 181 2, rpm 92 1,00 rpm Volvo TD72VE Tier 4i (Stage IIIB) 18 2,200 rpm 1,1 1,320 rpm Cummins QSC8.3 Tier 3 (Stage III) 183 2,200 rpm 1,12 1,00 rpm Cummins QSB.7 Tier 4i (Stage IIIB) 194 2,200 rpm 990 1,00 rpm FDC 40 FDC 20 Standard engines Optional engines Volvo TD1340VE Tier 2 (Stage II) 2 2,0 rpm 1,770 1,20 rpm Volvo TD130VE Tier 4i (Stage IIIB)1) 2 1, rpm 1,740 rpm Volvo TD92VE Tier 3 (Stage III) 242 2,0 rpm 1,700 1, rpm Cummins QSX11.9 Tier 4i (Stage IIIB) 20 2,0 rpm 1,20 1, rpm Cummins QSM11 Tier 3 (Stage III) 24 2,0 rpm 1,74 1, rpm Volvo TD1171VE Tier 4f (Stage IV) 2 2,0 rpm 1,78 90 rpm Volvo TD72VE Tier 4f (Stage IV) 2, rpm 9 1,200 rpm Volvo TD871VE Tier 4f (Stage IV) 18 2, rpm 1, 1, rpm Cummins QSB.7 Tier 4f (Stage IV) 149 2,200 rpm 929 1,00 rpm Cummins QSB.7 Tier 4f (Stage IV) 149 2,200 rpm 929 1,00 rpm Cummins QSL9 Tier 4f (Stage IV) 248 2,0 rpm 1,424 1,00 rpm Cummins QSG Tier 4f (Stage IV)2) 280 2,0 rpm 1,99 1, rpm Standard transmission Optional transmission Standard transmission Optional transmission Dana TE 13 ZF WG 171 Dana TE 17 ZF WG 211 Standard transmission Optional transmissions ZF WG 21 Dana TE 32 1) not available for model ZF WG 31) 2) only available for model FDC 00 FDC FDC FDC 20 FDC FDC 30 FDC 40 FDC 20 Speeds Lifting Lowering Traveling [km/h] [km/h] Weights Maxium static front axle load Maxium static rear axle load Dead weight Fuel tank capacity [l] Hydraulic oil tank capacity [l] Hydraulic pressure [bar] Capacities and pressures Travel gear Number of wheels Steered / driven axles Tire sizes Number of gears forward / reverse 4 x x /1 1/1 4 x x x x x x x x x x x x

5 COMPCT DESIGN β α MIN DIMENSIONS H1 The Terex general cargo forklift truck product line comprises fourteen models with lifting capacities from 1 to 2 t for great flexibility. FDC FDC FDC 20 FDC FDC 30 FDC 40 L FDC 20 L2 L3 Height L4 L1,30,700,000,000,,00 7,000 7,00 7,700 7,700 8,000 H2 Max. lifting height on forks,0,0,0,0 H3 Total height, mast closed 3,0 3,0 4, 4, 4, 4,00,000,000,200,200,00 H4 Driver seat height 2, 2, 2, 2, 2, 2, 2, 2,700 2, H Cab height 3, 4,00 4,00 4,00 4,00 4,00 H Ground clearance mast closed (unladen) H7 Ground clearance truck (laden) ,00 2,00 2,00 2,00 2,980 3,000 3,000 3, 3, W,30 W, W4, W3 W2 Total height, mast fully extended W1 H1 H7 H H4 H H3 H2 With a two mast stage design, these models reach lifting heights up to.1 m. The forks can be adjusted quickly up to +/- 40 mm and can be equipped with dedicated lifting gear to handle any kind of general cargo. Width W1 Outer chassis width/ width outer front wheels W2 Width inner front wheels 2, 2,90 2,90 2,90 2,90 3, 3, 3, 3, W3 Inner chassis width 1,80 1,80 1,80 1,80 2, 2, 2, 2,30 2,30 2,970 2,970 3,370 3,370 3,370 W4 Width of forks (standard) , 1, 1, 1, 1,30 1,30 1,30 1,30 1,30 W xel width rear wheels 2,0 2,0 2,0 2,0 2,0 2,80 2,80 2,80 2,80 2,80 W Width outer rear wheels 2,80 2,00 2,00 Truck length,00,0,,,30,0,0, 7,0 7,20 7,70 8,000 8,20 8,0 Length L1 L2 Front overhang 1,00 1,0 1,0 1, 1,200 1, 1, 1, 1, 1,30 L3 Wheelbase 3,70 3,70 4,00 4,70 4,70 4,70,000,000,00,70,000,20 L4 Rear overhang L Distance to fork center R2 R1 Terex forks R1 Front turning radius , R2 Rear turning radius,000,,00,00,0,700,700, 7,000 7,000 7,0 7, 8,000 8,200 α ngle of inclination (front) [ ] β ngle of inclination (back) [ ] F1 Thickness of standard fork F2 Width of standard fork F3 Length of standard fork F4 Forks front adjustment +/- 4 +/- 4 +/- 4 +/- 40 +/- 40 +/- 40 +/- 40 +/- 40 +/- 40 +/- 40 +/- 40 +/- 40 +/- 40 +/- 40 F1 Other dimensions F3 F4 F2 8 9

6 SUITED TO YOUR NEEDS STNDRD ND OPTIONL EQUIPMENT Terex forklift trucks are designed for a large variety of general cargo handling and can be easily equipped with various lifting gear to handle steel products, pelletized goods, bags and much more, quickly, safely and economically. In order to further increase the operability and efficiency of the Terex forklift trucks, TPS also offers a large number of options in addition to the standard equipment. Working hand in hand In many multipurpose and specialized terminals Terex forklift trucks work hand in hand with Terex Gottwald harbour cranes an example of how TPS offers solutions for the whole general cargo logistic chain, from the quayside to the warehouse. Equipment Section Terex forklift trucks handle containers with spreader or forks... Standard Option Control systems Motronica Vehicle Management System Rear camera Full vision system Bulb traffic and working lights Tires Ergonomically designed, soundproofed cab (noise level 7 db()) Superelastic tires Tilting cab (for models FDC 280) Trainer seat ir conditioning and heating system CD audio system dditional LED working lights Tubeless pneumatic tires Spare tire Tire pressure display Others Rear mounted cab LED traffic and working lights Cab ir suspension seat Option Lighting Rear parking sensors Driver seat belt Standard dditional design features nti-tipping device Section utomatic greasing for chassis, and mast Low temperature kit Fire suppression system Heated rear view mirrors Emergecy steering pump Load moment indicator Terex forks and lifting gears Rear hydraulic compensators Forks mounted fixed spreader 20 (for models FDC 20 30) Dry disc breakes on steering axle Forks mounted fixed spreader 40 (for models 40) Hydraulic forks mounted spreader light version (for models FDC 20-30) Hydraulic forks mounted spreader heavy version (for models - 20) Inverted forks beam (for models - 40) Inverted forks... in addition to a large variety of general cargo... More information about additional options on request. Based on individual needs, we can supply lifting gear.... including steel with forks clambs magnets coil mandrel 11

7 LIFE CYCLE SUPPORT Global support on a local level We are committed to keeping your equipment in service to increase your return on investment. Whether support comes from a local distributor or direct from the factory, operators can depend on Terex Port Solutions. Erection and commissioning Maintenance team and operator training Parts management Inspection and maintenance Refurbishment and upgrades Repairs Fleet management Relocation Our skilled service team is always close to you and enables you to exploit the full potential of your equipment and boost your productivity Effective date: June, Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator s Manual when using our equipment or otherwise failure to act responsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex Port Solutions makes no other warranty, express or implied. Terex, the Terex Crown design, Terex Gottwald, Motronica and Works For You are trademarks of Terex Corporation or its subsidiaries. ll other trademarks are property of their respective owners Terex Corporation. TEREX OPERTIONS ITLY srl Via Cisa Ligure 1/, Lentigione di Brescello (RE), Italy Phone: Fax: tps.info@terex.com Powered by TCPDF ( TPS-FLT-TD-EN-02 ROUND THE CLOCK, ROUND THE WORLD, ROUND YOUR BUSINESS