Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
|
|
- Lilian Bennett
- 6 years ago
- Views:
Transcription
1 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Period of validity: to Holder of certificate: Continental Reifen Deutschland GmbH Vahrenwalder Straße Hannover at the locations: Jädekamp 30, Hannover Philipsstraße 15, Aachen Contistraße 1, Wietze-Jeversen 3018 Kongquetai Road, Nangang Technology Zone, Hefei , Anhui (China) 6969 FM 117 Batesville Road, Uvalde/Texas (USA) Tests in the fields: Tests of tires and materials for the automotive industry Abbreviations used: see last page The testing laboratory is permitted, without being required to inform and obtain prior approval from DAkkS, to use standards or equivalent testing methods listed here with different issue dates. The testing laboratory maintains a current list of all testing methods within the flexible scope of accreditation. The test methods are indicate with the following abbreviations for locations, in which they performed respectively: H Hannover A Aachen W Wietze-Jeversen C Hefei (China) U Uvalde (USA) This document is a translation. The definitive version is the original German annex to the accreditation certificate. 1/5
2 Regulation Description Location UN R 30 tyres for motor vehicles and their trailers UN R 54 tyres for commercial vehicles and their trailers UN R 75 tyres for motor cycles and mopeds UN R 106 tyres for agricultural vehicles and their trailers UN R 109 Uniform provisions concerning the approval for the production of retreated pneumatic tyres for commercial vehicles and their trailers UN R 117 Uniform provisions concerning the approval of tyres with regard to rolling sound emissions and/or to adhesion on wet surfaces and/or to rolling resistance Regulation 1222/2009/EC Labelling Of Tyres With Respect To Fuel Efficiency And Other Essential Parameters FMVSS 109 New Pneumatic And Certain Specialty Tires FMVSS 119 New Pneumatic Tires For Motor Vehicles With A GVWR Of More Than 4,536 Kilograms (10,000 Pounds) And Motorcycles H, A Period of validity: to Translation - 2/5
3 FMVSS 139 GB/T 521 GB/T 4501 GB/T 4502 GB/T IS IS IS GSO GSO / 165/ 205/ SNI 0098 New Pneumatic Radial Tires for Light Vehicles Test Method of Measuring Peripheral Dimensions for Tyres Laboratory Test Methods for Truck and Bus Tyres Capabilities Laboratory Test Method for Passenger Car Tyres Capabilities Test Methods for Verifying Capabilities of Motorcycle Tyres Automotive vehicles - Pneumatic tyres for two and threewheeled motor vehicles - specification Automotive vehicles - pneumatic tyres for passenger car vehicles - diagonal and radial ply - specification Automotive Vehicles - Pneumatic Tyres for Commercial Vehicles - Diagonal and Radial Ply - Specification Passenger Car Tyres Part 3: Methods Of Test Multi-Purpose Vehicles, Trucks Buses and Trailer Tyres - Part 2: Methods of test Technical regulation of the quality of new tires for motorcycle, scooter and moped Technical quality regulation for new tires used on passenger cars, including those intended for mixed use, and towed vehicles Technical quality regulation for new tires used on commercial, light commercial and towed vehicles National Standard of Indonesia of Passenger Car Tires Period of validity: to Translation - 3/5
4 SNI 0099 SNI 0100 TSD 109 TSD 119 TSD 139 MS 149 MS 1394 NTE INEN 2097 NOM-086-SCFI 2010 NOM-086/1- SCFI Korean Label Regulation /237 ISO ISO ISO National Standard of Indonesia of Truck and Bus Tires National Standard of Indonesia of Light Truck Tires New Tires and Certain Specialty Tires New Tires of Motor Vehicles With a GVWR of more than 4,536 kg and Motorcycles New Radial Ply Tires for Motor Vehicles With a GVWR of 4,536 kg or Less Specification for New Pneumatic Passenger Car Tyres New Pneumatic Tyres for Highway Vehicles Other Than Passenger Cars - Specification Pneumatic Tires Type II and Type III - Test Methods New radial tires, used by any vehicle with a gross weight equal to or less than 4,536 kg (10,000 pounds) - Safety specifications and testing methods Rubber Industry - New Radial Tires For Vehicles With A Gross Vehicle Weight Exceeding 4,536 kg (10,000 lb) And Bias Tires Of Any Load Capacity - Safety Specifications And Test Methods. Korean Regulations regarding car tire energy consumption efficiency measurements, grade standards, markings, etc. Tyres - Coast-by methods for measurement of tyre-to-road sound emission Truck and bus tyres - Method for measuring relative wet grip performance - Loaded new tyres Passenger car tyres - Method for measuring relative wet grip performance - Loaded new tyres Period of validity: to Translation - 4/5
5 ISO Passenger car, truck and bus tyres - Methods of measuring rolling resistance - Single point test and correlation of measurement results A Abbreviations used: FMVSS GB/T GSO IS MS NOM NTE INEN SNI TSD UNECE United States Federal Motor Vehicle Safety Standards Guo Biao Tuijian (Chinese Recommended National Standard) Standardization Organization of the Gulf Cooperation Council Brazilian National Institute of Metrology, Normalization and Industrial Quality Indian Standard Malaysian Standard Mexican Standard Ecuador Standard Standard Nasional Indonesia (Indonesian National Standard) (Canadian) Technical Standards Document United Nations Economic Commission for Europe Period of validity: to Translation - 5/5
Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17435-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 06.12.2017 to 08.12.2018 Holder of certificate: k3works
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17435-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 30.09.2016 to 08.12.2018 Holder of certificate: k3works
More informationAnnex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 11238 01 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 09.02.2016 to 08.02.2021 Holder of certificate: ContiTech
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11109-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 13.06.2018 to 22.06.2020 Holder of certificate: TÜV
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11065-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 08.02.2016 to 07.02.2021 Holder of certificate: Actemium
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL18398-02-01 according to DIN EN ISO/IEC 17025:2005 Period of validity: 26.02.2018 to 25.02.2023 Holder of certificate: SAL
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11272-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 18.10.2017 to 17.10.2022 Holder of certificate: VDZ
More informationAnnex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 11140 18 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 06.11.2014 to 05.11.2019 Holder of certificate: Fraunhofer
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17579-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 07.07.2017 to 06.07.2022 Holder of certificate: gammatest
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH German Accreditation Body Annex to the Accreditation Certificate D-PL-20591-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 14.08.2017 to 13.08.2022
More informationApplication chart / Tableau Des Doses D application Tabla De Aplication / Tabella di Applicazione / Quadro de Aplicaco
Particular Guide-line for : 10 Inch Rims 13 Inch Rims Boat trailers, Horse Box trailers, 145/70 10 150 175/60 13 250 Utility Trailers & Towing caravans 145/80 10 150 185/60 13 250 6 200 155/60 10 150 195/60
More informationIndian Tyre Production Estimate
Transmitted by the expert from India Informal Document No. GRRF-62-38 (62nd GRRF, 25-28 September 2007 agenda item 9(a)) Proposal: Comments from India on the GTR for Passenger Vehicle Tyres under formulation
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11057-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 20.06.2014 to 19.06.2019 Holder of certificate: OELCHECK
More informationAnnex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 18438 02 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 11.03.2014 to 10.03.2019 Holder of certificate: Jürgen
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-20258-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 2016-02-02 to 2021-02-01 Holder of certificate: Amphenol-Tuchel
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11125-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 31.07.2017 to 30.07.2022 Holder of certificate: DIN
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18869-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 30.08.2013 to 29.08.2018 Holder of certificate: ilf
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11321-02-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 20.12.2016 to 19.12.2021 Holder of certificate: TÜV
More informationMeeting CRIA - ETRMA October 26, 2010
Meeting CRIA - ETRMA October 26, 2010 1 Content Tyre Homologation Introduction ETRTO General Safety Regulations 661/2009 (Tyre performance thresholds) Interaction between EU and UNECE legislation and type
More informationTire Testing Machines
Tire Testing Machines TS TS Founded 2005 Founded 1994 Founded 2010 Founded 1933 Engineering, construction, supply and commissioning of test stations for tires Engineering, construction, supply and commissioning
More informationAnnex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 20281 01 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 31.08.2016 to 30.08.2021 Holder of certificate: Deutsche
More informationSaudi Standards, Metrology and Quality Org(SASO)
الهيي ة السعودية للمواصفات و المقاييس و الجودة Saudi Standards, Metrology and Quality Org(SASO) SASO 2857:2015 VEHICLE TIRES ROLLING RESISTANCE AND WET GRIP REQUIREMENTS ICS : 83.160.01 مقدمة قامت الهيي
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18192-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 15.11.2017 to 14.11.2022 Holder of certificate: ITAP
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-12095-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 2015-07-16 to 2019-03-06 Holder of certificate: Weidmüller
More informationE/ECE/324/Rev.1/Add.74/Rev.2/Amend.4 E/ECE/TRANS/505/Rev.1/Add.74/Rev.2/Amend.4
7 December 2017 Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles, Equipment and Parts which can be Fitted and/or be Used on Wheeled Vehicles and
More informationAccreditation. a'1" ul. ( oar.hl,.n" Deutsche Akkreditieru ngsstelle G m bh. Y,/.,n" r,nn" Head of Division
( oar.hl,.n" Akkreditieru ngsstel le Deutsche Akkreditieru ngsstelle G m bh Entrusted according to Section 8 subsection 1 AkkStelleG in connection with Section 1 subsection 1 AkkStellecBV Signatory the
More informationGB/T Translated English of Chinese Standard: GB/T Translated by:
Translated English of Chinese Standard: GB/T4502-2009 Translated by: www.chinesestandard.net Email: Sales@ChineseStandard.net ICS 83.160.10 National Standard of the People s Republic of China GB G 41 GB/T
More informationE/ECE/324/Rev.2/Add.108/Rev.1/Amend.3 E/ECE/TRANS/505/Rev.2/Add.108/Rev.1/Amend.3
16 January 2019 Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles, Equipment and Parts which can be Fitted and/or be Used on Wheeled Vehicles and
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17453-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 03.07.2017 to 02.07.2022 Holder of certificate: SPIE
More informationDeutsche Akkreditierungsstelle GmbH
(( DAk~~"h' Akkreditierungsstelle Deutsche Akkreditierungsstelle GmbH Entrusted according to Section 8 subsection 1 AkkStelleG in connection with Section 1 subsection 1 AkkStelleGBV Signatory to the Multilateral
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 21069-1 First edition 2004-11-01 Road vehicles Test of braking systems on vehicles with a maximum authorized total mass of over 3,5 t using a roller brake tester Part 1: Pneumatic
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-19722-01-00 according to DIN EN ISO/IEC 17025:2005 Holder of certificate: Institut für Lacke und Farben Magdeburg ggmbh Fichtestraße
More informationApplication of Federal Motor Vehicle Safety Standards by Type of Motor Vehicle or Item of Motor Vehicle Equipment. August 2005
Application of Federal Motor Vehicle Safety Standards by Type of Motor Vehicle or Item of Motor Vehicle Equipment TM August 2005 Prepared By School Bus Manufacturers Technical Council National Association
More informationPeriod of validity: to Date of issue:
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11190-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 09.03.2017 to 02.02.2020 Holder of certificate: TÜV
More informationGB Translated English of Chinese Standard: GB NATIONAL STANDARD OF THE
Translated English of Chinese Standard: GB9744-2015 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 83.160.10 G 41 GB/T 9744-2015 Replacing
More informationSeries of Motorcycle Tyres
GB/T 2983-28 Translated English of Chinese Standard: GB/T2983-28 Translated by: www.chinesestandard.net Wayne Zheng et al. Email: Sales@ChineseStandard.net ICS 83.16.1 G 41 NATIONAL STANDARD OF THE PEOPLE
More informationAnnex to the accreditation certificate D-PL according to DIN EN ISO/IEC 17025: and council directives 90/385/EWG 2 and 93/42/EWG 3
Deutsche Akkreditierungsstelle GmbH Annex to the accreditation certificate D-PL-13422-01-02 according to DIN EN ISO/IEC 17025:2005 1 and council directives 90/385/EWG 2 and 93/42/EWG 3 Period of validity:
More informationAccreditation. Deutsche Akkreditierungsstelle GmbH hereby confirms that the testing laboratory
Entrusted pursuant to 8 (1) of the German Accreditation Body Act (AkkStelleG) in conjunction with 1 (1) of the Regulation on the Entrustment of the Accreditation Body (AkkStelleGBV) Accreditation Deutsche
More information1 Section 2.1 of New Brunswick Regulation under the Motor Vehicle Act is amended by adding 84.11(1) or (7), after 84(2), (7) or (10),.
1 1 Section 2.1 of New Brunswick Regulation 83-42 under the Motor Vehicle Act is amended by adding 84.11(1) or (7), after 84(2), (7) or (10),. 2 Section 23 of the Regulation is amended in subsection (1)
More informationProprietary & Confidential INCOMPLETE VEHICLE DOCUMENT FOR CABLESS BUS CHASSIS MANUFACTURED IN TWO (2) OR MORE STAGES This Document is Required by Federal and Canadian Law and Shall Not Be Removed from
More informationE/ECE/324/Rev.2/Add.105/Rev.2/Amend.5 E/ECE/TRANS/505/Rev.2/Add.105/Rev.2/Amend.5
E/ECE/324/Rev.2/Add.105/Rev.2/Amend.5 E/ECE/TRANS/505/Rev.2/Add.105/Rev.2/Amend.5 27 April 2018 Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles,
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-20575-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 2018-03-05 to 2021-07-28 Holder of certificate: innogy
More informationQC/T Translated English of Chinese Standard: QC/T AUTOMOTIVE INDUSTRY STANDARD
QC/T 198- Translated English of Chinese Standard: QC/T198- www.chinesestandard.net Sales@ChineseStandard.net QC ICS 43.040.10 AUTOMOTIVE INDUSTRY STANDARD OF THE PEOPLE S REPUBLIC OF CHINA T 36 QC/T 198-
More informationMALAYSIAN STANDARD QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS (FIRST REVISION) (ISO 9001:2008, IDT) (PUBLISHED BY STANDARDS MALAYSIA IN 2009)
MALAYSIAN STANDARD MS ISO 9001:2008 QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS (FIRST REVISION) (ISO 9001:2008, IDT) (PUBLISHED BY STANDARDS MALAYSIA IN 2009) ICS: 03.120.10 Descriptors: quality management,
More informationBenefits of Adopting a Flexible Motor Vehicle Certification System in Vietnam
Benefits of Adopting a Flexible Motor Vehicle Certification System in Vietnam U.S. Automotive Industry Meeting with Vietnam Register Delegation Detroit Michigan 15 September 2017 Charles D. Uthus, Vice
More informationECE-R13 New proposal for Annex 23
Informal document GRRF-80-39 80 th GRRF, 15 18 September 2015 agenda item 3 ECE-R13 New proposal for Annex 23 Winfried Gaupp www.bmvi.de The title of the new Annex 23 is: Special additional requirements
More informationAnnex to the Accreditation Certificate D-K according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-K-15102-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 05.07.2017 to 04.07.2022 Date of issue: 05.07.2017
More informationPRODUCT CONFORMITY & REGULATORY REQUIREMENTS FOR AUTOMOTIVE PARTS FOR THE REGION-TYRES & BATTERIES
PRODUCT CONFORMITY & REGULATORY REQUIREMENTS FOR AUTOMOTIVE PARTS FOR THE REGION-TYRES & BATTERIES AT A GLANCE Nº1 90,000 2,000 WORLD LEADER EMPLOYEES OFFICES AND LABORATORIES 12 GLOBAL SERVICE LOCAL EXPERTISE
More informationE/ECE/324/Rev.1/Add.53/Rev.3/Amend.3 E/ECE/TRANS/505/Rev.1/Add.53/Rev.3/Amend.3
22 February 2017 Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Equipment and Parts which can be Fitted and/or be Used on Wheeled Vehicles and the Conditions
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
eutsche Akkreditierungsstelle Gmb Annex to the Accreditation Certificate -PL-19399-01-00 according to IN EN ISO/IEC 17025:2005 ate of issue: 29.11.2018 older of certificate: Inspectorate eutschland Gmb
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025: and the Directive 93/42/EEC 2 and 90/385/EEC 3
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18398-02-02 according to DIN EN ISO/IEC 17025:2005 1 and the Directive 93/42/EEC 2 and 90/385/EEC 3 Period of validity: 26.02.2018
More informationGB/T Translated English of Chinese Standard: GB/T NATIONAL STANDARD OF THE
Translated English of Chinese Standard: GB/T18386-2017 www.chinesestandard.net Buy True-PDF Auto-delivery. Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 43.020 T
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-19065-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 2017-11-22 to 2022-11-21 Date of issue: 2017-11-22
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11035-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 13.02.2018 to 12.02.2023 Holder of certificate: DMT
More informationEconomic and Social Council
United Nations Economic and Social Council ECE/TRANS/WP.29/GRRF/2014/24 Distr.: General 4 July 2014 Original: English Economic Commission for Europe Inland Transport Committee World Forum for Harmonization
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate DPL110551000 according to DIN EN ISO/IEC 17025:2005 Period of validity: 20140612 to 20160711 Date of issue: 20140612 Holder of
More informationDEPARTMENT OF TRANSPORTATION. National Highway Traffic Safety Administration. [Docket No. NHTSA ; Notice 2]
This document is scheduled to be published in the Federal Register on 12/30/2014 and available online at http://federalregister.gov/a/2014-30486, and on FDsys.gov DEPARTMENT OF TRANSPORTATION National
More informationCertificate of Appointment. Eurofins Product Service GmbH
Certificate of Appointment The National Standards Authority of Ireland, as the approval authority for Ireland to grant approvals for vehicles, technical units and components according to EC Directives
More informationIGTT a.s. Tyre Testing Laboratory Šternberská 446, Louky, Zlín
The Laboratory is qualified to update standards identifying the test procedures. The Laboratory has a flexible scope of accreditation permitted as detailed in the Annex. Updated list of activities provided
More informationGCC STANDARDIZATION ORGANIZATION (GSO)
هيئة التقييس لدول مجلس التعاون لدول الخليج العربية GCC STANDARDIZATION ORGANIZATION (GSO) مشروع مواصفة نهائي Final Draft of Standard FDS TC 02/SC 01 إعداد اللجنة الفنية الفرعية الخليجية رقم Prepared by
More informationInformal document No. 2
Informal document No. 2 Distr.: General 9 October 2017 Original: English Economic Commission for Europe Inland Transport Committee Working Party on Road Transport Group of Experts on European Agreement
More informationEconomic and Social Council
United Nations Economic and Social Council ECE/TRANS/WP.29/GRRF/2018/9 Distr.: General 4 December 2017 Original: English Economic Commission for Europe Inland Transport Committee World Forum for Harmonization
More informationNat l Highway Traffic Safety Admin., DOT
Nat l Highway Traffic Safety Admin., DOT 571.119 571.119 Standard No. 119; New pneumatic tires for vehicles other than passenger cars. S1. Scope. This standard establishes performance and marking requirements
More informationGlobal Technical Regulation No. 16 (Tyres)
Informal document GRRF-86-28 86 th GRRF, 12-16 February 2018 Agenda item 7(a) Global Technical Regulation No. 16 (Tyres) IWG Tyre GTR Proposal for Amendment No. 2 (phase 2A) European Tyre and Rim Technical
More informationGB Translated English of Chinese Standard: GB NATIONAL STANDARD OF THE
Translated English of Chinese Standard: GB9743-2015 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 83.160.10 G 41 GB/T 9743-2015 Replacing
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-19065-04-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 2017-05-11 to 2022-05-10 Date of issue: 2017-05-11
More information--> Buy True-PDF --> Auto-delivered in 0~10 minutes. GB Translated English of Chinese Standard: GB
Translated English of Chinese Standard: GB23255-2009 www.chinesestandard.net Sales@ChineseStandard.net ICS 43.040.20 NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA GB T38 Photometric characteristics
More informationHIGHWAY TRAFFIC ACT DRIVER S LICENSES REGULATIONS
c t HIGHWAY TRAFFIC ACT DRIVER S LICENSES REGULATIONS PLEASE NOTE This document, prepared by the Legislative Counsel Office, is an office consolidation of this regulation, current to May 6, 2017. It is
More informationCertificate of Appointment
Certificate of Appointment The National Standards Authority of Ireland, as the approval authority for Ireland to grant approvals for vehicles, technical units and components according to EC Directives
More informationCEMA position on draft braking regulation, 4 June 2008 ENTR/F1/ /rev16
CEMA PT16 N05Rev CEMA position on draft braking regulation, 4 June 2008 ENTR/F1/5030-99/rev16 CEMA is the European association representing the agricultural machinery industry. It represents the industry
More informationCONTACT ME If you have comments or suggestions with regard to this or any of our bulletins, contact me at:
DISCLAIMER The content of this bulletin reflect my opinion and the feedback from our customers on the subject discussed unless otherwise credited. You are free to agree or disagree with it. CONTACT ME
More informationGB/T Translated English of Chinese Standard: GB/T NATIONAL STANDARD OF THE
Translated English of Chinese Standard: GB/T2977-2008 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 83.160.10 G 41 GB/T 2977-2008 Replacing
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025: and the Directive 93/42/EEC 2 and 90/385/EEC 3
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-13412-01-02 according to DIN EN ISO/IEC 17025:2005 1 and the Directive 93/42/EEC 2 and 90/385/EEC 3 Indefinite since: 10.12.2018
More informationAnnex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 19102 01 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 03.09.2013 to 02.09.2018 Holder of certificate: AUCOTEAM
More informationISO INTERNATIONAL STANDARD. Passenger car, truck, bus and motorcycle tyres Methods of measuring rolling resistance
INTERNATIONAL STANDARD ISO 18164 First edition 2005-07-01 Passenger car, truck, bus and motorcycle tyres Methods of measuring rolling resistance Pneumatiques pour voitures particulières, camions, autobus
More informationTHE NETHERLANDS (N E D E R L A N D) COMMUNICATION
Vehicle Technology Division THE NETHERLANDS (N E D E R L A N D) COMMUNICATION Concerning (1) - approval granted - approval extended - approval refused - approval withdrawn - production definitely discontinued
More informationCOMMISSION REGULATION (EU)
30.11.2011 Official Journal of the European Union L 317/17 COMMISSION REGULATION (EU) No 1235/2011 of 29 November 2011 amending Regulation (EC) No 1222/2009 of the European Parliament and of the Council
More informationGB/T Translated English of Chinese Standard: GB/T
Translated English of Chinese Standard: GB/T4501-2016 www.chinesestandard.net Sales@ChineseStandard.net GB ICS 83.160.10 G 41 GB/T 4501-2016 Replacing GB/T 4501-2008 Laboratory Test Methods for Truck and
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18869-01-00 according to DIN EN ISO/IEC 17025:2005 Holder of certificate: ilf Forschungs- und Entwicklungsgesellschaft Lacke
More informationVehicle Testing& Homologation
Section 2 Vehicle Testing& Homologation (Automotive Type Approval) At first, you need to think What is your product? (vehicle? Lamp? Audio?) Where is the target market? (Europe? USA? - - -) How is your
More informationPartial List of Clients in Automotive Tire Domain
GCC and Africa Tire Regulations & Standards Analysis Market Intelligence. Consulting About TechSci Research TechSci Research is a premium market research and consulting service provider with offices in
More informationDÜRR NDT GmbH & CO. KG Höpfigheimer Straße Bietigheim-Bissingen
Evaluation of the image quality of a radiographic film emulsion AGFA D7 exposed by X-rays and developed by machine processing (8 min cycle time at 29 C) using Dürr NDT XR D-6 NDT developer and XR F-6 NDT
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17640-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 18.12.2017 to 04.11.2018 Holder of certificate: Haltermann
More informationSound-absorbing spacer Sorp10
Sponsor: Reference number: 7.3 / 27080 This document is only a translated version; not legally attested Max Frank GmbH & Co. KG Mitterweg 1 94339 Leiblfing Federal Institute for Materials Research and
More informationTRUCK & BUS TIRE CATALOGUE
TRUCK & BUS TIRE CATALOGUE www.zeetex.com Application Guide IMPORTANT: Always refer to the vehicle tire information table/chart for the correct tire size and inflation pressure. General Instructions 1.
More informationAPROTUFF BUS TYRES TRUCK ...
AOTUFF TRUC BUS TYRES... Brief IntroductioAaAn Eastman Impex... A Passion for excellence... We take pleasure to welcome you to Eastman Impex Family!!!! Eastman Impex is a global company, established in
More informationGB/T Translated English of Chinese Standard: GB/T NATIONAL STANDARD OF THE
Translated English of Chinese Standard: GB/T26774-2016 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 43.150 T 50 GB/T 26774-2016 Replacing
More informationProvläsningsexemplar / Preview INTERNATIONAL STANDARD. Motorcycles - Brakes and braking devices - Tests and measurement methods
INTERNATIONAL STANDARD ISO 8710 First edition 1995-08-01 Motorcycles - Brakes and braking devices - Tests and measurement methods Mo tocycles - Freins et dispositifs de freinage - Methodes d essai et de
More informationISO INTERNATIONAL STANDARD. Tyres Electrical resistance Test method for measuring electrical resistance of tyres on a test rig
INTERNATIONAL STANDARD ISO 16392 First edition 2007-10-15 Tyres Electrical resistance Test method for measuring electrical resistance of tyres on a test rig Pneumatiques Résistance électrique Méthode d'essai
More informationDäck för personbilar, lastbilar, bussar och motorcyklar Metoder för mätning av rullmotstånd (ISO 18164:2005, IDT)
SVENSK STANDARD Fastställd 2005-08-02 Utgåva 1 Däck för personbilar, lastbilar, bussar och motorcyklar Metoder för mätning av rullmotstånd (ISO 18164:2005, IDT) Passenger car, truck, bus and motorcycle
More informationDraft Technical Report. Fuel consumption, External Electrical Consumption and Maximum speed measurement.
Draft Technical Report Energy and Operation Performance of Hydrogen (H 2 ) fuelled Vehicles Rev. 1 of the draft report: Fuel consumption, External Electrical Consumption and Maximum speed measurement.
More informationCertificate of Appointment
Certificate of Appointment The National Standards Authority of Ireland, as the approval authority for Ireland to grant approvals for vehicles, technical units and components according to EC Directives
More informationISO 8710 INTERNATIONAL STANDARD. Motorcycles Brakes and brake systems Tests and measurement methods
INTERNATIONAL STANDARD ISO 8710 Second edition 2010-04-15 Motorcycles Brakes and brake Tests and measurement methods Motocyles Freins et systèmes de freinage Méthodes d'essai et de mesure Reference number
More informationIWG TYREGTR 17 th Meeting* Brussels, ETRTO Office, 2-3 November 2017 Report of the Chair
Submitted by the Chair of the IWG on Tyre GTR Informal document GRRF-86-21 86 th GRRF, 12-16 February 2018 Agenda item 7(a) IWG TYREGTR 17 th Meeting* Brussels, ETRTO Office, 2-3 November 2017 Report of
More informationEconomic and Social Council
United Nations Economic and Social Council ECE/TRANS/WP.1/2014/8/Rev.1 Distr.: General 8 January 2015 Original: English Economic Commission for Europe Inland Transport Committee Working Party on Road Traffic
More informationCONSUMER INFORMATION Tyre Labelling 1222/2009. ETRMA CRIA Meeting, Brussels 0ctober Fazilet Cinaralp, Secretary General
CONSUMER INFORMATION Tyre Labelling 1222/2009 ETRMA CRIA Meeting, Brussels 0ctober 26 2010 Fazilet Cinaralp, Secretary General Content 1. The tyre labelling requirements 2. Status of test methods 3. Declaration
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 TUV SUD AMERICA - AUBURN HILLS 1755 Atlantic Blvd. Auburn Hills, MI 48326 William (Mac) Elliott Phone: 813 284 2736 MECHANICAL Valid To: August 31, 2018 Certificate
More informationGSO ECCS Procedure for the Implementation of Conformity Certificates for Motorcycles
GSO ECCS Procedure for the Implementation of Conformity Certificates for Motorcycles 1. Introduction: In accordance with the decision of the Council of the GCC Standardization Organization (GSO) held in
More informationAnnex to the Accreditation Certificate D-PL according to ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-20658-01-00 according to ISO/IEC 17025:2005 Period of validity: 13.06.2018 to 12.06.2023 Holder of certificate: IMAT Shenyang
More informationLaboratory Alignment Procedure for Improving Reproducibility of Tyre Wet Grip Measurement
EVS28 Seoul, Korea, May 17-20, 2015 Laboratory Alignment Procedure for Improving Reproducibility of Tyre Wet Grip Measurement Kwangki Jeon 1*, Yongho Yoo 1, Jinwoo Lee 1, Dohyun Jung 1, Seolhee Lim 2,
More information