THE NETHERLANDS (N E D E R L A N D) ECE R13, Annex 11 Appendix 3 Test report as prescribed in Paragraphs and of Appendix 2 to this Annex

Transcription

1 Vehicle Technology Division THE NETHERLANDS (N E D E R L A N D) ECE R13, Annex 11 Appendix 3 Test report as prescribed in Paragraphs and of Appendix 2 to this Annex Test report number: RDW Extension number: Identification: 1.1. Axle: Manufacturer (name and address) : Arvin Meritor HVS Ltd, Cwmbran, Gwent, NP44 3XU, UK 1.2. Brake: Make : ROR Type : Q Model : Non driven trailer axle Technically permissible axle load (P e ) : dan ( kg) Manufacturer (name and address) : Arvin Meritor HVBS Ltd. Cwmbran, Gwent, NP 44 3XU, UK Make : ROR Type : Q and Q+(420 x 180) Model : S cam Technically permissible brake input torque C max : 2400 Nm. Automatic Brake Adjustment Device : Integrated/non-integrated (1) Brake drum or brake disc (1) : Internal diameter of drum or outside diameter of disc (1) : 419,1 419,35 mm. Effective radius : 209,5 mm. Thickness (2) :- Mass : 42,5 kg Material : Chrome Cast Iron P.O. Box 777 Tel (0) Vehicle Approval and Information 2700 AT Zoetermeer Fax + 31 (0) The Netherlands Braking-system R13-10-rev5 annex11-appendix3 v1.00 Page 1 of 7

2 Brake lining or pad (1) : Manufacturer : Federal Mogul Friction Products GmbH TMD Friction Holdings GmbH Fras-le S.A. Brasil. Type : ROR 329 Identification (must be visible when : the lining/pad is mounted on the brake shoe/backing plate) Type identification on the lining Width : 178 mm Thickness : mm (Q )( sickle shape) Surface area : mm 2 Method of attachment : Riveted Brake geometry, attach dimensions drawing as follows: brakes see Figure 2A of this Appendix Wheel(s): Single/Twin (3) diameter (D) : See Figure 1A : See Figure 1A 1.4. s: Reference rolling radius (R e ) at reference action (P e ) : 543 mm 1.5. Actuator: Manufacturer : Haldex Type (cylinder/diaphragm) (3) : Berg Model : 30 LS Lever length (l e ) : 127 mm (1) Automatic Brake Adjustment Device (not applicable in the case of integrated Automatic Brake Adjustment Device): Manufacturer (name and address) : Arvin Meritor Grange Road, Cwmbran Make : Meritor Type : Multi-hole Version : - Braking-system R13-10-rev5 annex11-appendix3 v1.00 Page 2 of 7

3 2. Record of test results (4) (Corrected to take account of rolling resistance => 0,01.P e ): 2.1. In the case of vehicles of Categories O 2 and O 3 : Test type: O I Annex 11, Appendix 2, Paragraph.: / Test speed -- km/h Brake actuator pressure p e 10 2 kpa 6,5 -- 6,5 Braking time -- min -- 2,55 -- Brake force developed T e N Brake efficiency T e /9.81P e ,58 0,07 0,47 Actuator stroke S e mm Brake input torque C e Nm Threshold torque C o,e Nm In the case of vehicles of Category O 4 : Test type: O III Annex 11, Appendix 2, Paragraph.: Test speed initial -- km/h Final -- km/h Brake actuator pressure p e 10 2 kpa 6,5 -- 6,5 Number of brake applications Duration of braking cycle -- s Brake force developed T e N Brake efficiency T e /9.81P e ,54 0,30 0,46 Actuator stroke S e mm Brake input torque C e Nm Threshold torque C o,e Nm Remark : for reference see testreport RDW This item is to be completed only when the brake has been subject to the test procedure defined in Paragraph 4 of Annex 19 to this Regulation to verify the cold performance characteristics of the brake by means of the brake factor (B F ). Where the brake factor is defined as input to output amplification ratio of the brake Brake factor B F : 11,1 ( eta C* 1,63 x 0,85) Remark for reference see testreport RDW Performance of the automatic brake adjustment device (if applicable) : 3.1. Free running according to Paragraph of Annex 11, Appendix 2 : yes Remark for reference see testreport RDW Braking-system R13-10-rev5 annex11-appendix3 v1.00 Page 3 of 7

4 Remark: 4. This test has been carried out and the results reported in accordance with Appendix 2 to Annex 11 and where appropriate Paragraph 4, of Annex 19 to ECE Regulation number 13, as last amended by the 10 series of amendments. Technical service (5) carrying out the test Signed : :RDW Europaweg 205 P.O. Box AT Zoetermeer The Netherlands Date : Approval authority (5) :RDW Europaweg 205 P.O. Box AT Zoetermeer The Netherlands Signed : Date : (6) At the end of test defined in Paragraph 3.6 of Annex 11, Appendix 2, the requirements of Paragraph of ECE Regulation number 13 where deemed to be fulfilled/not fulfilled (2). Signed : Date : (1) Only to be completed when an Automatic Brake Wear Adjustment Device is installed. (2) Applies to disc brakes only. (3) Strike out what does not apply. (4) Track Test/Inertia Dynamometer Test/Rolling Road Dynamometer Test (delete where not applicable). (5) To be signed by different persons even when the Technical Service and Approval Authority are the same or alternatively, a separate Approval Authority authorisation issued with the report. (6) Only to be completed when an automatic brake wear adjustment device is installed. Braking-system R13-10-rev5 annex11-appendix3 v1.00 Page 4 of 7

5 Figure 1A Tabel : Q brake (dan) (kg) , Q + brake (dan) (kg) , Braking-system R13-10-rev5 annex11-appendix3 v1.00 Page 5 of 7

6 Figure 1A Tabel : Q brake (dan) (kg) , Q + brake (dan) (kg) , Braking-system R13-10-rev5 annex11-appendix3 v1.00 Page 6 of 7

7 Figure 2A Type of brake a e h e c e d e e e α oe Q ( 420 x 180) 171,45 323,85 31,75 36,51 13, , Q + (420 x 180) 171,45 323,85 31,75 36,51 13, , α 1e b e r e F e (cm 2 ) S 1e S 2e S 3e Braking-system R13-10-rev5 annex11-appendix3 v1.00 Page 7 of 7