I - (127 kw) SAE Net Horsepower 170 hp. Buckets Range to 4.25 cu. yd. (3.2 m3) Operating Weights to 35,357 lb. (16035 kg) ", ".,.,'".

Size: px
Start display at page:

Download "I - (127 kw) SAE Net Horsepower 170 hp. Buckets Range to 4.25 cu. yd. (3.2 m3) Operating Weights to 35,357 lb. (16035 kg) ", ".,.,'"."

Transcription

1 ,i " r... \J.", ".,.,'". SAE Nt Horspowr 17 hp (127 kw) Buckts Rang to 4.25 cu. yd. (3.2 m3) Oprating Wights to 35,357 lb. (1635 kg) ", Modl shown may includ options

2 ENGNE.,1:W Typ john Dr 659T with altitudcompnsating turbochargr Ratd powr 12 SAEnt hp (9 kw) 125 SAEgross hp (94 rpm Cylindrs 6 Displacmnt 359 cu. in. (5.884 L) Maximum nt torqu 388 lb.-ft. (527 rpm Lubrication prssur systm with full-flow spin-on filtr and coolr Ful consumption, typical 2. to 4. gal./hr. (7.6 to 15.2 Llh) Cooling fan blowr Elctrical systm 12 volt with 95-amp altrnator Battry (on 12 volt) rsrv capacity: 16 min., 625 CCA Air clanr dual safty lmnt dry typ; rstriction indicator for srvic TRANSMSSON Typ torqu convrtr - powr shift Controls ow-ffort lctronically controlld automatic shift and quick-shift button Forward Rvrs Travl spds' mph (km/h) mph (km/h) Gar (7.4) 4.6 (7.4) Gar (12.3) 7.7 (12.3) Gar (27.2) 16.9 (27.2) Gar (38.4) *544G and 624G ar quippd with tirs; 644G is quippd with tirs. AXLESBRAKES Final drivs havy-duty plantary, mountd inboard Diffrntials (choic of) convntional front and rar - Standard; hydraulic lock front, convntional rar - Optional; NoSPNfront, convntional rar- Optional; hydraulic lock front and rar - Optional; front axl disconnct - Optional Rar axl oscillation 22 dgrs, stop to stop Maximum ris and fall, singl wh in. (727 mm) Braks (conform to SAEj1473, S345) Srvic braks inboard-mountd hydraulic wt disc, bathd in cooling oil, long lif slfadjusting Parking brak automatically spring applid, hydraulically rlasd, disc and calipr typ, attachd to transmission output shaft HYDRAUUCSYSTEM/STEERNG Pump (loadr and string) gar-typ, opn-cntr systm Maximumflow 46.3gpm(175Llmin.)@6oopsi (4137 kpa) and 2,2 rpm Prssur oadr rlif 2,75 psi ( kpa) string rlif 2,65 psi (18 27 kpa) Loadr controls two-function valv with singl lvr and control lvr lockout Hydraulic cycl tims Rais 5.8 s. Dump l.4 s. Lowr 3.2 sc.(float down) 3.5 sc. (powrdown) Maximum lift capadty with 2.25 cu. yd. (1.7 m3) xcavatingbuckt Lift at ground lvl 24,264 lb. (116 kg) With couplr 23,32b. (1568 kg) Lift at maximum hight 12,31 lb. (5457 kg) With couplr 1l,492 lb. (5212 kg) String (conforms to SAEj1511) Typ powr, fully hydraulic Rlifvalv stting 2,65 psi (18 27 kpa) Articulation angl 8-dgr arc (4 dgrs ach dirction) Turning radius (masurd to cntrlin of outsidtir) 16ft. 3 in. (4.95m) TRES Choicof ,12PRL ,12PRL ,12 PR L ,12 PRL , 12 PR L , 16 PR L , Radial, On Star L3 quivalnt , Radial, On Star L2 quivalnt , Radial, On Star L3 quivalnt tirs (on- or thr-pic whls) Trad width in. (194 mm) in. (2365 mm) Chang in vrtical hight tirs 1.57 in. (- 4 mm) Trad width in. (194 mm) in. (242 mm) Chang in vrtical hight O nm john Dr 668T with altitudcompnsating turbochargr 145 SAEnt hp (18 kw) 15 SAEgross hp (112 rpm cu. in. (6.785 L) 456 lb.-ft. (618 rpm prssur systm with full-flow spin-on filtr and coolr 2.6 to 4.8 gal./hr. (9.8 to 18.2 L/h) blowr 12 volt with 95-amp altrnator rsrv capacity: 16 min., 625 CCA dual safty lmnt dry typ; rstriction indicator for srvic torqu convrtr - powr shift low-ffort lctronically controlld automatic shift and quick-shift button Forward Rvrs mph (km/h) mph (km/h) 4.5 (7.3) 4.5 (7.3) 7.2(11.6) 7.2(11.6) 15.2(24.5) 15.2(24.5) 23. (37.3) havy-duty plantary, mountd inboard convntional front and rar - Standard; hydraulic lock front, convntional rar - Optional; NoSPN front, convntional rar - Optional; hydraulic lock front and rar - Optional; front axl disconnct - Optional 26 dgrs, stop to stop 32.8 in. (833 mm) inboard-mountd hydraulic wt disc, bathd in cooling oil, long lif slfadjusting automatically spring applid, hydraulically rlasd, disc and calipr typ, attachd to transmission output shaft gar-typ, opn-cntr systm 61 gpm (231 psi (4137 kpa) and 2,2 rpm loadr rlif 2,8 psi (19 36 kpa) string rlif 2,65 psi (18 27 kpa) two-function valv with singl lvr and control lvr lockout 5.8 s. 1.7 s. 3.5 sc. (float down) 3.5 sc. (powr down) with 2.63 cu. yd. (2. m3) xcavatingbuckt 26,938 lb. (12217 kg) 25,589 lb. (11 65kg) 14,143lb. (6414kg) 13,817 lb. (6266 kg) powr, fully hydraulic 2,65 psi (18 27 kpa) 8-dgr arc (4 dgrs ach dirction) 16 ft. 1.5 in. (5.14 m) ,12 PR L2 / ,12 PR L , 12 PR L , 12 PR L ,16 PR L , Radial, On Star L2 quivalnt , Radial, On Star L3 quivalnt , Radial, On Star 1.2 quivalnt , Radial, On Star L3 quivalnt 81.1 in. (26 mm) 1.3 in. (2549 mm) in. (~6 mm) ml john Dr 676A with altitudcompnsating turbochargr; aftrcoold 17 SAEnt hp (127 kw) 178 SAEgross hp (133 rpm cu. in. (7.636 L) 598 lb.-ft. (811 rpm prssur systm with full-flow spin-on filtr and coolr 3. to 5.9 gal./hr. (11.3 to 22.3 Llh) blowr 12 volt with 95-amp altrnator rsrv capacity: 16 min., 925 CCA dual safty lmnt dry typ; rstriction indicator for srvic torqu convrtr - powr shift low-ffort lctronically controlld automatic shift and quick-shift button Forward Rvrs mph (km/h) mph (km/h) 4.4 (7.) 4.4 (7.) 7.(11.2) 7.(11.2) 13.7 (22.) 13.7 (22.) 21.5 (34.6) havy-duty plantary, mountd inboard convntional front and rar - Standard; hydraulic lock front, convntional rar - Optional; NoSPN front, convntional rar- Optional; hydraulic lock front and rar - Optional; front axl disconnct - Optional 26 dgrs, stop to stop 36.6 in. (929 mm) inboard-mountd hydraulic wt disc, bathd in cooling oil, long lif slfadjusting automatically spring applid, hydraulically rlasd, disc and calipr typ, attachd to transmission output shaft gar-typ, opn-cntr systm 69.5gpm (4137kPa) and 2,2 rpm loadr rlif 3, psi (2 685 kpa) string rlif 2,65 psi (18 27 kpa) two-function valv with singl lvr and control lvr lockout 6.2 s. 1.8 s. 3.5 sc. (floatdown) 13.9 sc.(powrdown) with 3.25 cu. yd. (2.5 m3) xcavatingbuckt 33,886 lb. (15 368kg) 32,524lb. (14 75kg) 19,823 lb. (899 kg) 19,2 lb. (8626 kg) powr, fully hydraulic 2,65 psi (18 27 kpa) 8-dgr arc (4 dgrs ach dirction) 17 ft. 11 in. (5.46 m) , 12 PR , 16 PR L , 16 PR L , 12 PR L , 16 PR L , 2 PR L , Radial, On Star L3 quivalnt , Radial, On Star L2 quivalnt , Radial, On Star L3 quivalnt ~ ~ lj

3 oi: TRES(continud) tirs Trad width Chang in vrtical hight , Radial tirs Trad width Chang in vrtical hight tirs Trad width mn 74.8 in. (19 mm) in. (2462 mm) in. (+ 66 mm) Chang in vrtical hight CAPACTES(U.S.! Ful tank with ground lvl fuling 57.6 gal. (218 L) Cooling systm 25 qt. (24 L) Engin lubrication, including full-flow spin-on filtr 2 qt. (19 L) Powr shift transmission, including vrtical cartridg filtr 1 qt. (9.5 L) Diffrntials Front 2 qt. (19 L) Rar 2 qt. (19 L) Loadr hydraulic rsrvoir 8 qt. (76 L) DMENSONSWTHBUCKET Ovrall hight 11 ft. 5.3 in. (3.52 m) 4) Hight to top of cab and canopy l ft. 4.8 in. (3.17 m) G Hight to top of xhaust 9 ft. 2 in. (2.79 m) Ground claranc 14.7 in. (373 mm) «)Lngth from cntrlin of front axl 57 in. (145 mm) Whlbas 114 in. (29 mm) Maximum buckt angl 55.3 dgrs «) Dump hight... Hight to hing pin, fully raisd 12 ft. 2.6 in. (3.72 m) Digging dpth 4 in. (11 mm). S Buckt nformation blow and on pag G BUCKETNFORMATON PN.ON BucktTyp/Siz Capacity,hapdSAE,in cu. yd. (m3)... Capacity,struck SAE,in cu. yd. (m3).. Bucktwidth, in in. (m)... Brakoutforc, SAEJ732C. in lb. (kn).. Tipping load, straight. in lb. (kg)... Tipping load,4-dgr full turn, SAE,in lb. (kg)... Rach,45-dgrdump, 7-H. (2.13 m) claranc,in in. (mm)... Rach,45-dgr dump. full hight, in in. (mm) Dump claranc,45 dgr,full hight, in in. (mm)... Dvralilngth. in H.-in. (m)... Loadr claranccircl, bucktin carry position, in (2.) (1.7)...1.4(2.55).2,569(91.5).18,914(8579)...16,8(7261) 58.15(1477) 4.6(13) (2724) (7.6) ml Stockpilingwlo 2.5(1.9) 2.12(1.62) 1.4(2.55) 22.27(98.8) 19,469(8831) 16,534(75) 58.3(1474) 39.2(995) 19.8(2788) (6.97) 77.2 in. (196 mm) 99.3 in. (2522 mm) m in. (217 mm) 17.6 in. (2732 mm) -2. in. (-51mm) 85.4 in. (217 mm) 18. in. (2743 mm) 2.4 in. (- 62 mm) 83.5 in. (212 mm) 18.9 in. (2765 mm) Excavatingwlo 2.25(1.7) 1.88(1.44) 1.4(2.55) 24,3(16.9) 19,833(8996) 16,876(7655) 57.5(1449) 37.2(944) 111.8(2839) (6.89) (2.) 2.26(1.73) 1.4(2.55) 22,59(98.1) 19,132(8678) 16,22(7349) 57.2(1453) 38.6(98) 19.3(2776) (6.98) '\- Multipurpos (1.6) 1.77(1.35) 1.4(2.55) 2.682(93.8) (7963) 14.86(6716) 5.3(1277) 34.7(881) 13.8(2636) (7.8) H.-in. (m) (11.51) 37-7(11.46) 37-7(11.46) 37-9(11.51) (11.47) 37-5(11.44) 37-5(11.44) (11.47) 37-1(11.54) Opratingwight, in lb. (kg) 24,92(1928) 23,828(188) 23,947(1662) 24,311(1127) 23,934(1856) 23,57(1691) 23,689(1745) 24,53(191) 24,61(11158), Auxiliaryspillguard is dalrinstalld.thspillguardis primarilyintnddto prvntspillagof loos matrial.howvr.it dosincrasbucktcapacity...allidahachmntsordrdthroughjohn Drdalrs. Loadroprating information isbasdonmachinwithallstandardquipmnt; ,12PRL2tirs;tworarcountrwights; ROPScab;175-lb.(79kg)oprator; andfullfultank.thisinformation isaffctdbyfirsiz,ballast, anddihrnt aftachmnts.."hlt- ADJUSTMENTSTOOPERATNGWEGHTSFORPN.ONBUCKETS Adjustmnts to oprating wights and tipping loads for 2.25 cu. yd. (1.7 m3) xcavating buckt Add (+)or dduct (-) lb. (kg)as indicatd for loadrs with Oprating Wight , 12 PR L2 tirs without CaCl, 194 lb. (- 88 kg) ,12 PR L2 tirs with CaClz lb. (+ 343 kg) ,12 PR L2 tirs with CaClz + 1,18 lb. (+ 535 kg) ,12 PR L3tirs without CaClz lb. (+6 kg) ,12 PR L3tirs with CaC, + 1,312 lb. (+ 595 kg) tirs without CaClz lb. (+ 172 kg) tirs with CaClz + 1,559 lb. (+ 77 kg) , 12 PR L2tirs without CaCl, lb. (+ 36 kg) , 12 PR L2tirs with CaClz + 2,615 lb. ( kg) , 12 PRL3tirs without CaClz + 1,85 lb. (+ 442 kg) ,12 PRL3tirs with CaClz + 2,96 lb. ( kg) 65.7 gal. (249 L) 26 qt. (25 L) 2qt.(19L) 12 qt. (11 L) 3 qt. (28 L) 2 qt. (19 L) 18 qt. (12 L) RaPS canopy in liu of RaPS cab 32 lb. (- 145 kg) Buckt tth + 24 lb. (+ 19 kg) Dduct two rar countrwights 1,736 lb. (- 787 kg) Add on rar countrwight* 946 lb. (- 429 kg) *Optional countrwight not to b usd whn CaC!zballast is usd in th tirs. 11 ft. 1.4 in. (3.62 m) 1ft. 9.9 in. (3.3m) 9 ft. 7.9 in. (2.94 m) 17 in. (433 mm) in. (1515 mm) in. (33 mm) 55.8 dgrs. 12 ft. 9.3 in. (3.89 m) 2 in. (52 mm) 2.75(2.1) 2.41(1.84) 1.4(2.55) 22.11(98.4) 19,423(881) 16,484(7477) 583(1474) 39.2(995) 19.8(2788) (6.97) 75 gal. (284 L) 3 qt. (28.5 L) 25 qt. (24 L) 15 qt. (14L) 3 qt. (28.4 L) 3 qt. (28.4 L) 12 qt. (115 L) 12ft. 3.2 in. (3.74m) 11 ft. 2.7 in. (3.42 m) 1ft. 4.4 in. (3.16m) 19 in. (483 mm) 63 in. (16 mm) 126 in. (32 mm) 55 dgrs. 13 ft. 1.9 in. (4. m) 2.68 in. (68 mm) (2.2) 2.51(1.92) 1.4(2.55) 2,43(9.9) 18,841(8546) 15,933(7227) 58.15(1477) 4.6(13) 17.2(2724) (7.6) TippingLoad,Straight -137 lb. (-62 kg) + 1,199 lb. (+ 544 kg) + 1,658 lb. (+ 752 kg) +93b.(+42kg) + 1,75 lb. (+ 794 kg) lb. (+ 121 kg) + 1,925 lb. (+ 873 kg) +558b. (+253 kg) + 3,117 lb. ( kg) lb. (+ 346 kg) + 3,323 lb. (+ 157 kg) -32 lb. (-137 kg) -295 lb. (-134 kg) - 3,978 lb. (- 184 kg) - 2,13 lb. (- 966 kg) 2.38(1.8) 1.99(1.52) 1.4(2.55) (98.5) (8737) (749) 57.2(1453) 38.6(98) 19.3(2776) (6.96) Tipping Load, 4- DgrFull Turn, SAE lb. (- 54 kg) - 1,36 lb. (- 47 kg) + 1,431 lb. (+ 649 kg) + 79 lb. (+ 36 kg) + 1,512 lb. (+ 686 kg) lb. (+ 14 kg) + 1,662 lb. (+ 754 kg) lb. (+ 218 kg) + 2,692 lb. ( kg) lb. (+ 298 kg) + 2,869 lb. (+ 131 kg) lb. (- 126 kg) lb. (- 131 kg) - 3,188 lb. ( kg) - 1,748 lb. (- 793 kg) 2.5(1.9) 2.16(1.65) 1.4(2.55) 23,942(16.5) 19,791(8977) 16,83(7634) 57.5(1449) 37.2(944) 111.8(2839) (6.89)

4 ~~tclfcaton~ ~ 624G BUCKETNFORMATON PN.ON BucktTyplSiz Capacity,hapdSAE,in cu. yd. (m3)... Capacity,struck SAE,incu. yd. (m3).. Bucktwidth, in in. (m)... Brakoutforc, SAEJ732C, in ib. (kn).. Stockpilingw 3.25(2.5) (2.1) (2.58)...26,78(118.8)...2,484(929)...17,329(7859) Tipping ioad,straight,inib. (kg)... Tipping ioad,4-dgrfuii turn, SAE,in ib.(kg)... Rach,45-dgrdump, 7-ft. (2.13 m) claranc,in in. (mm) 6.5 (1536) Rach,45-dgrdump, fuii hight,in in. (mm) (127)... Dumpclaranc,45 dgr,fuii hight, in in. (mm) 19.6 (2784) Ovraiilngth,in ft.-in. (m) (7.52) Loadrclaranccirci, bucktin carry position, in ft.-in. (m) (12.3) (11.96) (11.96) (12.3) (11.97) 39-(11.9) 39-(11.9) (11.97) 39-17(11.93) Opratingwight, in ib. (kg) 27,854 (12632) 27,435 (12442) 27,554(12496) 27,973 (12686) 27,756 (12588) 27,338 (12398) 27,456 (12452) 27,876 (12642) 28,13(12745).Auxiiiaryspiiiguardis dairinstaiid.thspiiiguard is primarily intnddto prvntspiiiagof ioosmatrial.howvr,if dosincrasbucktcapacity. "Aiiid attachmntsordrdthrough John Drdalrs. Loadropratinginformationis basdon machinwith aii standardquipmnt;2.5-25,12 PR L2tirs; onrarcountrwight;ropscab;175-lb.(79 kg) oprato~andfuii fuitank. Thisinformationis affctdbytir siz,ballast,and diffrntattachmnts..;j'~lt ADJUSTMENTS TOOPERATNGWEGHTSFORPN.ONBUCKETS Adjustmnts to oprating wights and tipping loads for 2.63 cu. yd. (2. m3) xcavating buckt Add (+)or dduct (-) lb, (kg)as indicatd for loadrswith OpratingWight ,12 PR L2tirs without CaCl, 794 lb kg) ,12 PR L2tirs with CaCl, lb. (+ 175 kg) , 12 PR L3tirs without CaCl, 661 lb. (- 3 kg) ,12 PR L3tirs with CaC, b. (+235 kg) Stockpilingwlo 3. (2.3) 2.63(2.) 11.8 (2.58) 29,44 (13.8) 21,25 (9617) 18,1 (8164) 59.8 (152) 38. (966) 112.9(2868) (7.41) tirs without CaCl, 414 lb. (- 188 kg) tirs with CaCl, lb. (+ 347 kg) , 12 PRL2 tirs with CaCl, + 1,82 lb. (+ 826 kg) , 12 PRL3 tirs without CaCl, lb. (+ 132 kg) ,12 PR L3tirs with CaCl, + 2,112 lb. (+958 kg) , Radial, On Star L2quivalnt Stockpilingw 3.12(2.4) 2.88(2.2) 11.8 (2.58) 29,238 (13.) 21,157(9595) 17,951 (8141) 59.8 (152) 38. (966) 112.9(2868) (7.41) Stockpilingw Bolt.onEdg+ 3.38(2.6) 3. (2.3) 11.8 (2.58) 26,494 (117.8) 2,41 (9252) 17,241 (7819) 6.5 (1536) 4.4 (127) 19.6 (2784) (7.52) Excavatingw Boll-onEdg 2.75(2.1) 2.38(1.8) 11.8 (2.58) 29,47 (129.2) 2,758 (9414) 17,572 (7969) 59.2 (153) 37.6 (956) (2854) (7.42) Excavatingwlo 2.63(2.) 2.25 (1.7) 11.8(2.58) 32,22(143.2) 21,497(9749) 18,262(8282) 58.5(1485) 35.3(896) 115.7(2938) (7.3) Excavatingw 2.75(2.1) 2.5(1.9) 11.8 (2.58) 32,19 (142.8) 21,459 (9732) 18,22 (8263) 58.5(1485) 35.3(896) (2938) (7.3) Excavatingw + 3.(2.3) 2.63(2.) 11.8 (2.58) 28,925 (128.6) 2,77 (9391) 17,514 (7943) 59.2 (153) 37.6 (956) (2854) (7.42) Multipurpos" 2.38(1.8) 2.(1.5) 11.8(2.58) 32,471 (144.4) 2,13 (979) 16,98 (7668) 49.8(1265) 28.6(726) 111.8(2839) 24-.9(7.34) tirs without CaCl, lb. (+ 212 kg) lb. (+ 15 kg) lb. (+ 13 kg) , Radial, On Star L2quivalnt tirs with CaC, + 2,288 lb kg) + 2,888 lb. (+ 131 kg) + 2,493 lb. ( kg) ROPScanopy in liu of ROPScab 32 lb kg) lb kg) - 241lb, 1-19 kg) Buckt tth + 24 lb. (+ 19 kg) lb. (- 135 kg) lb. (- 132 kg) Dduct on rar countrwight 946 lb. (- 429 kg) -2,134 lb. (- 968 kg) - 1,753 lb. (- 795 kg) Add scond rar countrwight' + 1,169 lb. (+ 53 kg) + 2,677 lb. ( kg) + 2,196 lb. (+ 996 kg) 'Optional countrwight not to b usd whn CaCl, ballast is usd in th tirs. 644G BUCKETNFORMATON PN. ON Stockpilingw Stockpilingwlo + Excavatingw Excavatingwlo + Multipurpos" BucktTyp/Siz Boll-onEdg Splllguard' Capacity, hapdsae,incu.yd.(m3) 4.(3.1) 3.75(2.9) 4.(3.1) 4.25(3.2) 3.5(2.7) 3.25(2.5) 3.5(2.7) 3.75(2.8) 2.75(2.1) Capacity, strucksae,incu.yd.(m3) 3.4(2.6) 3.2 (2.45) 3.57(2.73) 3.78(2.89) 2.88(2.2) 2.75(2.1) 3.14(2.4) 3.25(2.5) 2.31(1.77) Bucktwidth,inin.(m) (2.85) (2.85) 112.2(2.85) 112.2(2.85) 112.2(2.85) 112.2(2.85) 112.2(2.85) 112.2(2.85) 112.2(2.85) Brakout forc,saej732c, inib.(kn) ,171(152.) 37,44 (166.5) 37,346(166.1) 33,997(151.2) 37,284(165.8) 41,15(182.8) 41,12(182.4) 37,139(165.2) 41,72(185.6) Tippingload,straight,inlb.(kg)...26,264(11911) 27,329 (12 394) 27,298(1238) 26,184(11875) 26,883(12192) 27,734(12578) 27,78(12566) 26,844(12174) 26,731(12123) Tippingload,4-dgrfuiiturn, SAE,inlb.(kg) ,118(131) 23,161 (154) 23,124(1487) 22,32(9992) 22,73(131) 23,525(1669) 23,492(1654) 22,687(1289) 22,614(1256) Tippingioad,35-dgr turn,sae,inib.(kg)...22,932(14) 23,975 (1 873) 23,937(1856) 22,846(1361) 23,543(1677) 24,345(1141) 24,314(1127) 23,499(1657) 23,417(162) Rach, 45-dgrdump,7-ft.(2.13m)ciaranc, in in.(mm) 64.4(1635) 63.8 (1622) 63.8(1622) 64.4(1635) 62.8(1596) 62.2(158) 62.2(158) 62.8(1596) 57.1(145) Rach, 45-dgrdump,fuiihight,inin.(mm) 45.(1142) 42.7(186) 42.7(186) 45.(1142) 42.(168) 39.8(lOll) 39.8(111) 42.(168) 35.6(94)... Dumpclaranc, 45dgr, fuiihight,inin.(mm) 111.3(2828) 114.8(2917) 114.8(2917) 111.3(2828) 114.3(294) 117.8(2992) 117.8(2993) 114.3(294) 115.8(2942) Ovraiilngth,inft.-in.(m) (7.88) (7.76) (7.76) (7.88) (7.77) 25-1(7.65) 25-1(7.65) (7.77) 25-.5(7.63) Loadrclaranc circl,bucktincarryposrtion, in ft.-in.(m) (12.81) (12.73) (12.73) 42-.2(12.81) (12.74) (12.67) (12.67) (12.74) (12.66) Opratingwight,inib.(kg) 35,236(1598) 34,824(15793) 34,943(15847) 35,357(1635) 34,98(15864) 34,544(15666) 32,226(1572) 35,95(15916) 35,35(15889) 'Auxiiiaryspiiiguardisdair instaiid. Thspiiiguardis primarilyintnddto prvntspiiiagof ioosmatrial.howvr, it dosincrasbucktcapacity...aiiidattachmntsordrdthroughjohn Drdairs. Loadr oprating information isbasdonmachinwrthaiistandardquipmnt; ,12PRL2tirs;onrarcountrwight; ROPScab;175-lb.(79kg)oprator; andfuiifuitank.thisinformation isaffctdbytirsiz,baiiast, anddiffrnt attachmnts..;f:~!t ADJUSTMENTS TOOPERATNGWEGHTSFORPN.ONBUCKETS Adjustmnts to oprating wights and tipping loads for 3.25 cu. yd. (2.5 m3) xcavating buckt Add (+)or dduct (-) lb. (kg)as indicatd for lpadrs with OpratingWight , 12 PRL2 tirs without CaCl, 1,587 lb kg) , 12 PR L2tirs with CaCl, + 234lb, (+ 16 kg) , 16 PR L2tirs without CaCl, 1,499 lb. (- 68 kg) , 16 PRL2 tirs with CaC, lb. (+ 146 kg) , 16 PR L3tirs without CaCl, 1,235 b- (- 56 kg) , 16 PR L3tirs with CaC, lb. (+ 266 kg) , Radial, On Star L2quivalnt tirs without CaCl, 1,12 lb kg) , Radial, On Star L2 quivalnt tirs with CaCl, + 71 lb. (+ 318 kg) , 12 PRL2 tirs with CaCl, + 2,396 lb. (+ 187 kg) , 2 PRL3 tirs without CaCl, lb. (+ 224 kg) ,2 PR L3tirs with CaCl, + 2,89 lb. ( kg) ROPScanopy in liu of ROPScab 32 lb. (- 145 kg) Buckt tth + 262lb, (+ 119 kg) Dduct on rar countrwight 91 lb kg) Add scond rar countrwight + 1,422 lb. (+ 645 kg) 'Optional countrwight not to b usd whn CaCl, ballast is usd in th tirs. TippingLoad,Straight - 56 lb. (- 254 kg) + 1,1 lb. (+ 499 kg) lb. (- 212 kg) + 1,193 lb. (+ 541 kg) lb. (- 133 kg) + 1,367 lb. (+ 62 kg) + 2,56 lb, ( kg) +25 lb. (+93 kg) + 2,765 lb. ( kg) Tipping Load, Straight -1,129 lb kg) + 1,462 lb kg) - 1,67 lb. (- 484 kg) + 1,526 lb. (+ 692 kg) lb. (- 398 kg) + 1,713 lb. (+ 777 kg) lb. (- 361 kg) + 1,795 lb. (+ 814 kg) + 3,411 lb. ( kg) +353 lb. (+ 16 kg) + 3,761 lb. (+ 176 kg) lb. (- 134 kg) -326 lb. (-148 kg) - 2,68 lb. (- 938 kg) + 3,258 lb. ( kg) TippingLoad,4- DgrFull Turn,SAE lb. (- 219 kg) +95b. (+ 431 kg) - 43 lb. (- 183 kg) + 1,3 lb. (+ 467 kg) lb. (- 114 kg) + 1,179 lb. (+ 535 kg) + 2,211 lb. (+ 13 kg) +179b.(+81 kg) + 2,388 lb. (+ 183 kg) Tipping Load,35- Dgr Turn, SAE - 1,5 lb kg) + 1,31 lb kg) -95 lb. (-431 kg) + 1,356 lb. (+ 615 kg) lb. (- 355 kg) + 1,523 lb. (+ 691 kg) - 71 lb. (- 322 kg) + 1,596 lb. (+ 724 kg) + 3,36 lb. (+ 1,377 kg) +313 lb. (+ 142 kg) + 3,347 lb. ( kg) lb. (- 124 kg) lb kg) - 1,773 lb. (- 84 kg) + 2,789 lb. ( kg) Tipping Load, 4- DgrFull Turn,SAE lb. (- 443 kg) + 1,263 lb. (+ 573 kg) lb. (- 418 kg) + 1,316 lb. (+ 597 kg) lb. (- 344 kg) + 1,479 lb. (+ 671 kg) lb kg) + 1,55 lb. (+ 73 kg) + 2,945 lb. ( kg) + 34 lb. (+ 138 kg) + 3,25 lb. ( kg) lb. (- 125 kg) -32 lb. (-145 kg) -1,7 lb, (- 771 kg) + 2,672 lb. ( kg)

5 ;H!tf.;;-~!tfnW BUCKETSELECTONGUDE" ""'""".'"""",,,U1 '""""'ffi (4.) Calich 2,1 125 _SPEC LOADER Cind 1, SPEClOADERWlTH Clayandgr"l,dry O.5.'S, '2PRL2 154 "RESWTHC,C" Clayandgravl,wt 2,6 (3.6) ANDD"EREAR Clay,dry 2,5 148 COUl'iRWElGHT ClaY,na1uralbd 2, Clay,wt 2,8 166 (3.2) Coal,anthracit, brokn 1,85 11 Coal,bituminous, brokn Earth,dry,packd 2, Earth,loam 2, (2.8) Earth,wt,xcavatd 2,7 16 Gran,broknorlargcrushd 2,8 166 Gravl,dry 2, Gravl,dry1/2't2"(13t5mm) 2, (2.5) Gravl,p run(gravldsand) 3, Gravl,wt1/2"t2'(13t5mm) 3,4 22 Gypsum,crushd 2,7 16, Limston, broknorcrushd 2,6 154 (2.1) " Magntit, ironor 4,7 279 Phosphat rock 2, Pyr,ironor 4, Sandandgravl,dry 2,9 172 (1.7) Sandandgravl,wt 3,4 22 Sand,dry 2,4 142 Sand,wt 3,1 184 m! BUCKET Maximum buckt angl...,..,,.., 55,3 dgrs Dump hight &. DMENSONSWTH TOOLCARRER Hight to hing pin, fully raisd 12 ft. 2.6 in. (3.72 m) Digging dpth 4 in. (11 mm) PALLETFORK Rach,fullyraisd 2 it. 3.4 in. (697mm) Maximum rach, fork lvl 4 it. 9.5 in. (1461 mm) Rach, ground lvl Fork hight, maximum rach 2 it in. (912 mm) 5 it. 4.6 in. (1641 mm) Fork hight, fully raisd 11 it. 4.7 in. (3473 mm) Digging dpth 4 in. (11 mm) MATERAL-HANDLNGARM 8 4) 4) Rach, fully raisd (xtndd) Rach, fully raisd (mid-position) Rach, fully raisd (rtractd) Maximum rach (rtractd) Maximum rach (mid-position) Maximum rach (xtndd) Rach, blow ground (rtractd) Rach, blow ground (mid-position) Rach, blow ground (xtndd) Hight, maximum rach Dpth, blow ground (rtractd) Dpth, biow ground (mid-position) Dpth, blow ground (xtndd) Hight, fully raisd (xtndd) Hight, fully raisd (mid-position) 11 ft. 3.7 in. (3446 mm) 9 it. 5.8 in. (289 mm) 6 it. 9 in. (257 mm) l1 it. 6.1 in. (358 mm) 15 it. 3.1 in. (4651 mm) 17 ft. 9.1 in. (5413 mm) 7 it. 6.6 in. (232 mm) 9 it in. (346 mm) l1 it. 1 in. (368 mm) 6 it. 3.6 in. (1919 mm) 4 it. 1.9 in. (1496 mm) 7 it. 5.3 in. (2286 mm) 9 it. 1.6 in. (2783 mm) 22 it. 1.2 in. (6736 mm) 2 it. 4.6 in. (6214 mm) Hight, fully raisd (rtractd) 17 it. 9.9 in. (5432 mm).&.s Buckt nformation blow and on pags G TOOLCARRERNFORMATON COUPLERAND BUCKET BucktTyp/Siz GnralPurpos' Capacity, hapd SAE 2.63 cu. yd, (2, m3) Capacity, struck SAE 2.25 cu. yd, (1.7 m3) Buckt width 11.8 in. (2.59 m) Brakout forc, SAE]732C 2,342 lb. (9.5 kn) Tipping load, straight 18,453 b, (837 kg) Tipping load, 4-dgr full turn, SAE 15,67b, (779 kg) Rach, 45-dgr dump, 7-ft. (2.13 m) claranc 58,5 in, (1486 mm) Rach, 45-dgr dump, full hight 41.1 in, (144 mm).&. Dump claranc, 45 dgr, full hight...17 in. (2717 mm) Ovralilngth 23 it 2 in, (7,6 m) Loadr claranc circl, buckt in carry ml 55.8 dgrs.&. 12 it. 9.3 in. (3.89 m) 2in. (52mm) 1 it in. (67 mm) 4 it. 9.5 in. (146 mm) 3 it..7 in. (932 mm) 5 it. 5.1 in. (1654mm) 11 it..6 in. (3623 mm) 3.7 in. (93 mm) position 37 it. 1,6 in. (11.55 m) 37 it. 6.7 in, (11.45 m) Oprating wight 24,434 lb. (11 83 kg) 24,145 lb. (1 952 kg) 'Allid attachmnts ordrd through John Dr dalrs, m! 55 dgrs.&. 13 it. 1.9 in, (4, m) 2.68 in, (68 mm) 2 it. 6.3 in, (77 mm) 5 it. 1.7 in. (1568 mm) 3 it. 1.7 in. (958 mm) 6 it..4 in. (184 mm) 12 it. 6,3 in, (3818 mm) 1.9 in. (48 mm) 11 it..6 in. (3368 mm) 11 it. 6,9 in, (3527 mm) 9 it. 2.7 in. (2812 mm) 9 it. 8.3 in. (2953 mm) 6 ft. 5.9 in. (1979 mm) 6 it. 1.4 in, (292 mm) 11 it. 6.3 in. (3512 mm) 11 it. 8.7 in, (3574 mm) 15 it. 3.3 in. (4655 mm) 15 it. 5.7 in, (4717 mm) 17 it. 9.3 in. (5417 mm) 17 it in. (5479 mm) 7 it. 9.2 in. (2367 mm) 7 it in, (2423 mm) 1 ft. 8.2 in. (3257 mm) 1 it. 1.9 in. (3324 mm) 12 it. 7.5 in. (3849 mm) 12 it. 1.5 in. (3924 mm) 6 it. 4,2 in, (1935 mm) 6 ft. 7,5 in, (219 mm) 4 it. 4,1 in, (1323 mm) 4 it. 2.3 in, (1294 mm) 6 it. 8,3 in, (24 mm) 6ft. 6,7 in, (1998mm) 8 it. 3.2 in, (2519 mm) 8 it. 1.2 in, (2468 mm) 22 it. 7,9 in. (695 mm) 22 it. 11 in. (6985 mm) 2 it in. (6383 mm) 21 it. 3,3 in. (6484 mm) 18 it. 4,5 in. (56 mm) GnralPurpos' 2.25 cu. yd. (1.7 m3) 1.88 cu, yd, (1.44 m3) 1.4 in, (2,55 m) 22,47 lb. (99.7 kn) 19,2 lb. (8619 kg) 16,11 b, (737 kg) 58,1 in. (1477 mm) 39.1 in, (992 mm) 11,1 in, (2798 mm) 22 it. 4,8 in, (6.83 m) Sandston, brokn 2, Shal 2,1 125 Slag,brokn 2, Ston,crushd 2,7 16 Topsoil 1, G/624G /644G LOADERWTH TOOL CARRER AND BUCKET" G/624G /644G LOADERWTH TOOL CARRER AND PALLET FORK* 544G/624G /644G LOADERWTHTOOLCARRER ANDMATERAL.HANDLNG ARM" 18 ft. 9.7 in, (5732 mm) 'Allid attachmnts ordrd through John Dr dalrs, GnralPurpos' 2, cu. yd. (1.5 m3) 1.9 cu. yd. (1.45 m3) in. (2.42 m) 25,223b, (114.4 kn) 19,196b, (877 kg) 16,286 lb, (7387 kg) 51.9 in. (1319 mm) in. (87 mm) in. (2854 mm) 22 it. 4.8 in. (6,83 m) 37ft.Oin.(11.28m) 24,83 lb, (1 924 kg) Gnral Purpos' 1.75 cu. yd, (1.4 m3) 1.5 cu, yd, (1.15 m3) 95,25 in, (2.42 m) 27,166 lb. (12.8 kn) 19,342 lb. (8773 kg) 16,417 lb. (7446 kg) 51.9 in, (1319 mm) in, (87 mm) in. (2854 mm) 22 it. 4,8 in, (6,83 m) 37 ft. Oin. (11.28m) 24,24 lb, (1 897kg) Loadr oprating information is basd on machin with all standard quipmnt; 17,5-25, 12 PRL2 tirs; two rar countrwights; RaPS cab; 175-lb. (79 kg) oprator; and full ful tank. This information is affctd by tir siz, ballast, and diffrnt attachmnts,

6 1.1W ADJUSTMENTS TOOPERATNGWEGHTSFORTOOLCARRERWTHBUCKET Adjustmnts to oprating wights and tipping loads for 2.25 cu. yd. (1.7 m3) gnral-purpos buckt and 48-in. (1219 mm) pallt fork Add (+) or dduct (-) lb. (kg) as indicatd TippingLoad, TippingLoad, TippingLoad, TippingLoad, for loadrs with OpratingWight Buckt,Straight Buckt,Full Turn Fork,Straight Fork,Full Turn , 12 PR L2 tirs without CaC, 194 lb. (- 88 kg) lb. (- 61 kg) lb. (- 52 kg) - 97 lb. (- 44 kg) -82 lb. (- 37 kg) ,12 PR L2 tirs with CaC, lb. (+ 343 kg) + 1,177 lb. (+ 534 kg) + 1,16 lb. (+ 461 kg) lb. (+ 379 kg) lb. (+ 328 kg) ,12 PR L2 tirs with Cal, + 1,18 lb. (+ 535 kg) + 1,629 lb. (+ 739 kg) + 1,47 lb. (+ 638 kg) + 1,158 lb. (+ 525 kg) + 1,3 lb. (+ 455 kg) ,12 PR L3 tirs without Cal, lb. (+ 6 kg) + 9 lb. (+ 41 kg) + 79 lb. (+ 36 kg) + 64 lb. (+ 29 kg) + 57 lb. (+ 26 kg) ,12 PR L3 tirs with CaCl, + 1,312 lb. (+ 595 kg) + 1,72 lb. (+ 78 kg) + 1,486 lb. (+ 674 kg) + 1,222 lb. (+ 554 kg) + 1,56 lb. (+ 479 kg) tirs without Cal, + 3"79lb. (+ 172 kg) + 26 lb. (+ 118 kg) +227b. (+ 13 kg) lb. (+ 84 kg) lb. (+ 73 kg) tirs with CaC, + 1,559 lb. (+ 77 kg) + 1,89 lb. (+ 857 kg) + 1,632 lb. (+ 74 kg) + 1,345 lb. (+ 61 kg) + 1,162 lb. (+ 527 kg) , 12 PR L2 tirs without CaCl, lb. (+ 36 kg) lb. (+ 248 kg) +474b.(+215kg) lb. (+ 176 kg) lb. ( kg) ,12 PR L2 tirs with CaC, + 2,615 lb. ( kg) + 3,61 lb. ( kg) + 2,644 lb. ( kg) + 2,178 lb. (+ 988 kg) + 1,883 lb. (+ 854 kg) , 12 PR L3 tirs without CaC, + 1,85 lb. (+492 kg) + 75 lb. (+ 34 kg) lb. (+293 kg) + 53 lb. (+ 24 kg) lb. (+ 28 kg) ,12 PR L3 tirs with Cal, + 2,96 lb. ( kg) + 3,261 lb. ( kg) + 2,818 lb. ( kg) + 2,42 lb. (+ 198 kg) + 2,93 lb. (+ 95 kg) RaPS canopy in liu of RaPS cab 32 lb. (- 145 kg) lb. (-134 kg) - 24 lb. (- 19 kg) lb. (- 96 kg) -17b.(-77kg) Dduct two rar countrwights 1,736b. (- 787 kg) - 3,85 lb. (-1726 kg) - 3,127 lb. ( kg) - 2,712 lb. (-123 kg) - 2,227 lb. (- 11 kg) Dduct on rar countrwight* 946 lb. (- 429 kg) - 2,92 lb. (- 949 kg) - 1,718 lb. (- 779 kg) - 1,488 lb. (- 675 kg) - 1,222 lb. (- 554 kg) *Optional countrwight not to b usd whn CaC, ballast is usd in th tirs. 1.1W TOOLCARRERNFORMATON(COUPLERANDFORKS) Tin Lngth 48 in. (1219 mm) 54 in. (1372 mm) Ground to top of tin claranc ll ft. 4.7 in. (3473 mill) 11 ft. 4.7 in. (3473 mill) Maximum rach with fork lvl 4 ft. 9.5 in. (1461 mill) 4 ft. 9.5 in. (1461 mill) Ovralilngth 25 ft. 3.9 in. (772 mill) 26 ft. 9.9 in. (7872 mill) Tipping load, straight (fork lvl, load cntrd on tin) 13,665 lb. (6198 kg) 13,24 lb. (66 kg) Tipping load, 4-dgr full turn (fork lvl, load cntrd on tin) 11,541 lb. (5235 kg) 11,224 lb. (591 kg) Oprating wight 23,827 lb. (1 88 kg) 23,869 lb. (1827 kg) 1.1W TOOLCARRERNFORMATON(COUPLERANDMATERAL.HANDLNG ARM) BoomPosition Rtractd Mid-position Oprating load 3,795 lb. (1721 kg) 3,966 lb. (1799 kg) Tipping load, straight 8,945 lb. (457 kg) 6,998 lb. (3174 kg) Tipping load, 4-dgr full turn 7,589 lb. (3442 kg) 5,932 lb. (2691 kg) Oprating wight 23,633 lb. (1 72 kg) 23,633 lb. (1 72 kg) 624GTOOLCARRERNFORMATONCOUPLERANDBUCKET 6 in. (1524 mm) 11 ft. 4.7 in. (3473 mill) 4 ft. 9.5 in. (1461 mill) 26 ft. 3.9 in. (824 mill) 12,899 lb. (5851 kg) 1,925 lb. (4956 kg) 23,99 lb. (1 845 kg) Extndd 2,585 lb. (1173 kg) 6,13 lb. (2768 kg) 5,171 lb. (2346 kg) 23,633 lb. (1 72 kg) BucktTyp/Siz GnralPurpos* GnralPurpos* Gnral Purpos* Capacity, hapd SAE 3. cu. yd. (2.3 m3) 2.63 cu. yd. (2. m3) 2.25 cu. yd. (1.7 m3) Capacity, struck SAE 2.63 cu. yd. (2. m3) 2.25 cu. yd. (1.7 m3) 1.88 cu. yd. (1.44 m') Buckt width 11.8 in. (2.59 m) 11.8 in. (2.59 m) 1.4 in. (2.55 m) Brakout forc, SAE]732c 27,28 lb. (121.3 kn) 29,77 lb. (132.4 kn) 32,696 lb. (145.4 kn) Tipping load, straight 2,17 lb. (9119 kg) 2,184 lb. (9154 kg) 21,58 lb. (955 kg) Tipping load, 4-dgr full turn, SAE 17,16 lb. (7717 kg) 17,98 lb. (7754 kg) 17,882 lb. (811 kg) Rach, 45-dgr dump, 7-ft. (2.13 m) claranc 59.9 in. (1522 mill) 58.6 in. (1489 mill) 58.2 in. (1478 mill) Rach, 45-dgr dump, full hight 39.6 in. (17 mill) 36.8 in. (936 mill) 34.8 in. (884 mill) '" Dump claranc, 45 dgr, full hight...ll.1 in. (2797 mill) in. (2865 mill) 116 in. (2946 mill) Ovralilngth 24 ft 9.5 in. (7.56 m) 24 ft. 5.3 in. (7.45 m) 24 ft..8 in. (7.34 m) Loadr claranc circl, buckt in carry position 39 ft. 5.2 in. (12.2 m) 39 ft. 2.8 in. (11.96 m) 38 ft. 1.8 in. (11.86 m) Oprating wight 27,88 lb. (12644 kg) 27,796 lb. (1266 kg) 27,432 lb. ( kg) *Allidattachmnts ordrd through]ohn Dr dalrs. Loadr oprating information is basd on machin with all standard quipmnt; ,12 PRL2tirs; on rar countrwight; RaPS cab; 175-lb. (79 kg) oprator; and full ful tank. This information is affctd by tir siz, ballast, and diffrnt attachmnts. l:t.{:!t-! ADJUSTMENTSTO OPERATNGWEGHTSFORTOOLCARRERWTH BUCKET Adjustmnts to oprating wights and tipping loads for 2.63 cu. yd. (2. m3) gnral-purpos buckt and 54-in. (1372 mm) pallt fork Add (+) or dduct (-) lb. (kg) as indicatd TippingLoad, TippingLoad, TippingLoad, TippingLoad, for loadrs with OpratingWight Buckt,Straight Buckt,Full Turn Fork,Straight Fork,Full Turn ,12 PR L2 tirs without CaCl, 794 lb. (- 36 kg) lb. (- 243 kg) lb. (- 29 kg) lb. (- 175 kg) lb. (-152 kg) ,12 PR L2 tirs with CaC, lb. (+ 175 kg) + 1,54 lb. (+ 478 kg) lb. (+ 413 kg) lb. (+ 346 kg) lb. (+ 298 kg) ,12 PR L3tirs without CaC, 661 lb. (- 3 kg) lb. (- 23 kg) lb. (- 174 kg) - 32 lb. (-145 kg) - 28 lb. (-127 kg) ,12 PR L3tirs with CaC, lb. (+ 235 kg) + 1,142 lb. (+ 518 kg) lb. (+ 448 kg) lb. (+ 376 kg) lb. (+ 324 kg) tirs without CaC, 414 lb. (- 188 kg) - 28 lb. (- 127 kg) - 24 lb. (- 19 kg) - 21 lb. (- 91 kg) -174b.(-79kg) tirs with CaC, lb. (+ 347 kg) + 1,31 lb. (+ 594 kg) ,12 PR L2tirs with CaC, + 1,82 lb. (+ 826 kg) + 2,452 lb. ( kg) ,12 PR L3 tirs without CaC, lb. (+ 132 kg) lb. (+ 89 kg) , 12 PR L3 tirs with CaCl, + 2,112 lb. (+ 958 kg) + 2,646 lb. (+ 12 kg) , Radial, On Star L2 quivalnt tirs without Cal, lb. (+ 212 kg) lb. (+ 143 kg) , Radial, On Star L2 quivalnt tirs with CaC, + 2,288 lb. (+ 138 kg) + 2,765 lb. ( kg) RaPS canopy in liu of RaPS cab 32 lb. (- 145 kg) lb. (- 13 kg) Dduct on rar countrwight 946 lb. (- 429 kg) - 2,44 lb. (- 927 kg) Add scond rar countrwight* + 1,169 lb. (+ 53 kg) + 2,564 lb. (+ 1,163 kg) *Optional countrwight not to b usd whn CaC, ballast is usd in th tirs. + 1,131 lb. (+ 513 kg) + 2,119 lb. (+ 961 kg) + 17 lb. (+ 77 kg) + 2,286 lb. (+ 137 kg) +271 lb. (+ 123 kg) + 2,39 lb. (+ 184 kg) lb. (- 12 kg) - 1,678 lb. (- 761 kg) + 2,11 lb. (+ 953 kg) +948 lb. (+ 43 kg) + 1,777 lb. (+ 86 kg) lb. (+65 kg) + 1,918 lb. (+ 87 kg) lb. (+ 14 kg) + 2,4 lb. (+ 99 kg) lb. (- 11 kg) - 1,471 lb. (- 667 kg) + 1,85 lb. (+ 839 kg) lb. (+ 37 kg) + 1,532 lb. (+ 695 kg) lb. (+ 56 kg) + 1,654 lb. (+ 75 kg) lb. (+ 89 kg) + 1,728 lb. (+ 784 kg) - 21 lb. (- 95 kg) - 1,211 lb. (- 549 kg) + 1,517 lb. (+ 688 kg)

7 , sreclrlcatons ~ --..;Y~lt TOOLCARRERNFORMATON (COUPLERANDFORKS) Tin Lngth 48 in. (1219 mm) Ground to top of tin claranc ll ft. 1.6 in. (3623 mm) Maximum rach with fork lv1 4 ft. 9.5 in. (146 mm) 4ft. 9.5 in. (146mm) Ovralilngth 25 ft. 8 in. (7823 mm) Tipping load, straight (fork lvl, load cntrd on tin) 15,222 lb. (693 kg) Tipping load, 4-dgr full turn (fork lvl, load cntrd on tin) 12,93 lb. (5864 kg) 12,56 lb. (5696 kg) Oprating wight 27,19 lb. ( kg) 27,232 lb. (1235 kg).;y~lt TOOLCARRERNFORMATON(COUPLERAND MATERAL-HANDLNGARM) Boom Position Rtractd Mid-position Oprating load 4,271 lb. (1937 kg) 3,354 lb. (1521 kg) Tipping load, straight 1O,59lb. (4562 kg) 7,93 lb. (3584 kg) Tipping load, 4-dgr full turn 8,542 lb. (3874 kg) 6,78 lb. (342 kg) Oprating wight 26,996 lb. (12243 kg) 26,996 lb. (12243 kg) 54 in. (1372 mm) 6 in. (1524 mm) 11 ft. 1.6 in. (3623 mm) 11 ft. 1.6 in. (3623 mm) 4ft. 9.5 in. (146mm) 26 ft. 2 in. (7975 mm) 26 ft. 8 in. (8128 mm) 14,79 lb. (677 kg) 14,38 lb. (6522 kg) 12,25 lb. (5535 kg) 27,271 lb. ( kg) Extndd 2,573 lb. (1167 kg) 5,956 lb. (271 kg) 5,164 lb. (2334 kg) 26,996 lb. (12243 kg) 644G TOOLCARRERNFORMATON COUPLERANDBUCKET Buckt Typ/Siz GnralPurpos' GnralPurpos' Capacity, hapd SAE 3.75 cu. yd. (2.8 m3) 3.25 cu. yd. (2.5 m3) Capacity, struck SAE 3.17 cu. yd. (2.42 m3) 2.78 cu. yd. (2.13 m3) Buckt width in. (2.85 m) in. (2.85 m) Brakout forc, SAE]732c 35,317 lb. (157.1 kn) 38,85 lb. (169.4 kn) Tipping load, straight 26,228 lb. ( kg) 26,595 lb. (1261 kg) Tipping load, 35-dgr full turn, SAE 22,945 lb. (1 46 kg) 23,283 lb. (1 559 kg) Tipping load, 4-dgr full turn, SAE 22,147 lb. (1 44 kg) 22,478 lb. (1 194 kg) Rach, 45-dgr dump, 7-ft. (2.13 m) claranc 65. in. (1652 mm) 63.7 in. (1618 mm) Rach, 45-dgr dump, full hight 44.8 in. (1138 mm) 42.3 in. (175 mm) "" Dump claranc, 45 dgr, full hight in. (2871 mm) in. (2935 mm) Ovralilngth 25 ft 8.3 in. (7.83 m) 25 ft. 4.5 in. (7.73 m) Loadr claranc circl, buckt in carry position 41 ft. 1.8 in. (12.77 m) 41 ft. 8.6 in. (12.72 m) Oprating wight 35,553 lb. ( kg) 35,384 lb. (1647 kg) 'Allid attachmnts ordrd through John Dr dalrs. Loadr oprating information is basd on machin with all standard quipmnt; , 12 PRL2 tirs; on rar countrwight; ROPScab; 175-lb. (79 kg) oprator; and full ful tank. This information is affctd by tir siz, ballast, and diffrnt attachmnts..;f:~lt ADJUSTMENTS TOOP-fRATNGWEGHTS FORrOOLCARRERW1HBUCKET Adjustmntsto opratingwightsandtippingloadsfor3.25cu.yd.(2.5m3)gnral-purpos bucktand5-in.(1524mm)palltlork Add(+)ordduct(-) lb.(kg)asindicatdfor TippingLoad, TippingLoad, Tipping Load, Tipping Load, Tipping Load, TippingLoad, loadrswith OpratingWight Buckt,Straight Buckt,35' Turn Buckt, Full Turn Fork,Straight Fork,35' Turn Fork,Full Turn ,12PRL2tirswithoutCaC,... 1,587lb.(- 72kg) -1,19b. (-53 kg) -988 lb.(-448 kg) -959b. (-435 kg) -745 lb. (-338 kg) -663 lb. (-3 kg) -642 lb. (-291 kg) ,12PRL2tirswithCaC, lb.(+16kg) +1,435lb.(+651kg) +1,2771b. (+579kg) + 1,239 lb. (+ 562 kg) +983 lb. (+446 kg) lb. (+ 397 kg) + 85 lb. (+ 386 kg) ,16PRL2tirswithoutCaC,... 1,499lb.(-68 kg) -1,47lb.(-475 kg) -933 lb.(-423 kg) -96 lb. (-411 kg) - 75 lb. (- 32 kg) -626b.(-284kg) -68 lb. (-276 kg) ,16PRL2tirswithCaC, lb.(+146kg) + 1,497lb.(+679kg) + 1,332lb.(+64kg) + 1,292 lb. (+ 586 kg) + 1,23 lb. (+464 kg) +912b.(+414kg) lb. (+ 41 kg) ,16PRL3tirswithoutCaC,... 1,235lb.(-56 kg) -862b.(-391 kg) -767 lb.(-348 kg) -745b.(-338kg) -58b. (-263 kg) -514b. (-233 kg) -498 lb. (-226 kg) ,16PRL3tirswithCaC, lb.(+266kg) + 1,682lb.(+763kg) + 1,495lb.(+678kg) +1,451 lb. (+658 kg) +1,148b.(+521 kg) + 1,24 lb. (+465 kg) lb. (+ 451 kg) ,Radial.OnStarL2quivalnt tirswithoutcac, 1,12lb.(-58 kg) -783 lb.(-355 kg) -697ib.(-316kg) -677 lb. (-37 kg) -524 lb. (-237 kg) -463 lb. (-21 kg) -45 lb. (-24 kg) ,Radial,OnStarL2quivalnt tirswith CaC,...+71lb.(+318kg) +1,762 lb. (+ 799 kg) + 1,566 lb. (+ 71 kg) ,12PRL2tirswithCaC,...+2,396lb.(+187kg) + 3,347 lb. ( kg) + 2,979 lb. ( kg) ,2PRL3tirswithoutCaC, lb.(+224kg) +344b.(+156kg) + 36 lb. (+ 139 kg) ,2PRL3tirswithCaCi, + 2,89lb. (+1311kg) +3,691 lb. ( kg) + 3,285 lb. (+ 149 kg) RaPScanopyinliuofRaPScab 32lb.(-145 kg) -298 lb. (-135 kg) -251b.(-114kg) Dductonrarcountrwight 91lb.(-413 kg) -2,31 lb. (-921 kg) lb. (- 789 kg) Addscondrarcountrwight' + 1,422lb.(+645kg) + 3,197 lb. (+ 145 kg) + 2,736 lb. ( kg) 'Optionalcountrwight notto busdwhncacl,ballastis usdinthtirs. GmlTOoL CARRERNFORMATON(COUPLERAND FORKS) Tin Lngth 54 in. (1372 mm) 6 in. (1524 mm) Ground to top of tin claranc 12 ft. 6.3 in. (3818 mm) 12 ft. 6.3 in. (3818 mm) Maximum rach with fork lv1 5 ft. 1.7 in. (1568 mm) 5 ft. 1.7 in. (1568 mm) Ovralilngth 27 ft. 2.3 in. (8287 mm) 27 ft. 8.3 in. (8439 mm) Tippingload,straight (fork lvl, load cntrd on tin) 18,251 lb. (8277 kg) 17,755 lb. (852 kg) Tipping load, 35-dgr turn (fork lvl, load cntrd on tin) 15,953 lb. (7235 kg) 15,511 lb. (734 kg) Tipping load, 4-dgr full turn (fork lvl, load cntrd on tin) 15,389 lb. (6979 kg) 14,963 lb. (6786 kg) Oprating wight 35,39b. (1613 kg) 35,379 lb. (1645 kg).;f:~!t TOOLCARRERNFORMATON(COUPLERAND MATERAL-HANDLNGARM) BoomPosition Rtractd Mid-position Oprating load 5,64 lb. (2558 kg) 4,462 lb. (224 kg) Tipping load, straight 13,29 lb. (627 kg) 1,518 lb. (477 kg) Tipping load, 35-dgr turn 11,671 lb. (5293 kg) 9,235 lb. (4188 kg) Tipping load, 4-dgr full turn 11,281 lb. (5116 kg) 8,924 lb. (447 kg) Oprating wight 34,114 lb. ( kg) 34,114 lb. (15471 kg) + 1,433 lb. (+ 65 kg) +2,891 lb. (+1311 kg) lb. (+ 135 kg) +3,188 lb. ( kg) -238 lb. (-18 kg) -1,669b.(-757kg) +2,622 lb. ( kg) 72 in. (1829 mm) 12 ft. 6.3 in. (3818 mm) 5 ft. 1.7 in. (1568 mm) 28 ft. 8.3 in. (8744 mm) 16,89 lb. (7623 kg) 14,67 lb. (6653 kg) 14,149 lb. (6417 kg) 35,523 lb. (16 11 kg) Extndd 3,92 lb. (177 kg) 9,24 lb. (4174 kg) 8,77 lb. (3663 kg) 7,83 lb. (3539 kg) 34,114 lb. (15471 kg) +1,24 lb. (+546 kg) + 2,283 lb. (+ 135 kg) +243b.(+11kg) +2,518b.(+1142kg) - 21 lb. (- 91 kg) -1,373 lb. (-622 kg) + 2,179 lb. (+988 kg) lb. (+488 kg) +2,31 lb. (+921 kg) +218b.(+99kg) +2,242 lb. (+ 117 kg) -17 lb. (- 77 kg) lb. (-533 kg) + 1,868 lb. (+ 847 kg) + 1,42 lb. (+ 473 kg) + 1,972 lb. (+ 894 kg) +29b.(+95kg) +2,177 lb. (+ 987 kg) -161 lb. (-73 kg) -1,126b.(-511 kg) + 1,79 lb. (+ 812 kg)

544E TC TOOL CARRIER ~~II ' / '-.-/ ENGINE PERFORMANCE ADD VERSATILITY WITH: Model shown includes optional and allied equipment

544E TC TOOL CARRIER ~~II ' / '-.-/ ENGINE PERFORMANCE ADD VERSATILITY WITH: Model shown includes optional and allied equipment II IJ.O,H..N. D.IR. I 544 TC TOOL CARRIR. '-../ Model shown includes optional and allied equipment '-.-/ NGIN PRFORMANC Nm Ib-ft 542 1 400 w 5a: 475 I 350 f2 ti; 407 1300 z 3391250...J w 15 ::> u. Uh 1gallh

More information

Engine 310SK 310SK TC John Deere PowerTech E 4045HT063 turbocharged,

Engine 310SK 310SK TC John Deere PowerTech E 4045HT063 turbocharged, SK/SK TC Engine SK SK TC Manufacturer and Model John Deere PowerTech TM E HT7 turbocharged, standard John Deere PowerTech E HT6 turbocharged, standard Non-Road Emissions Standard EPA Interim Tier /EU Stage

More information

AF General Information. Ordering. Popular Downloads. Dimensions. Technical

AF General Information. Ordering. Popular Downloads. Dimensions. Technical AF52-30-00-13 Products Low Voltag Products and Systms Control Products Contactors Block Contactors Gnral Information Extndd Product Typ: AF52-30-00-13 Product ID: 1SBL367001R1300 EAN: 3471523132337 Catalog

More information

Kayo Single-cylinder, 4-stroke, SOHC, Max. Torque: Air-cooled, Semi-auto. Fuel System: 72mL. Starting: mm. Transmission: 8.

Kayo Single-cylinder, 4-stroke, SOHC, Max. Torque: Air-cooled, Semi-auto. Fuel System: 72mL. Starting: mm. Transmission: 8. Blu Rd Availabl in nc s Prforma rk o F c li u ra d y Invrtd H Mufflr $1,049 Bor Strok: Max. Powr: Kayo Singl-cylindr, 4-strok, SOHC, Max. Torqu: Air-coold, Smi-auto Ful Systm: 72mL Starting: 47 41.4mm

More information

AF General Information. Ordering. Popular Downloads. Dimensions. Technical

AF General Information. Ordering. Popular Downloads. Dimensions. Technical AF16-30-10-13 Products Low Voltag Products and Systms Control Products Contactors Block Contactors Gnral Information Extndd Product Typ: AF16-30-10-13 Product ID: 1SBL177001R1310 EAN: 3471523110632 Catalog

More information

AF General Information. Ordering. Popular Downloads. Dimensions. Technical

AF General Information. Ordering. Popular Downloads. Dimensions. Technical AF30-30-00-13 Products Low Voltag Products and Systms Control Products Contactors Block Contactors Gnral Information Extndd Product Typ: AF30-30-00-13 Product ID: 1SBL277001R1300 EAN: 3471523111233 Catalog

More information

L-SERIES TRACTOR LOADERS 210L EP / 210L VERSATILITY, FRONT TO BACK

L-SERIES TRACTOR LOADERS 210L EP / 210L VERSATILITY, FRONT TO BACK L-SERIES TRATOR LOADERS VERSATILITY, FRONT TO BAK / SPEIFIATIONS Engine 210L EP 210L Manufacturer and Model John Deere PowerTech E 4045HT072 turbocharged John Deere PowerTech Plus 4045HT082 turbocharged

More information

Boeing 377 Stratocruiser Check-lists For A2A Simulations Boeing 377 Stratocruiser Boeing 377 Stratocruiser Check-lists

Boeing 377 Stratocruiser Check-lists For A2A Simulations Boeing 377 Stratocruiser  Boeing 377 Stratocruiser Check-lists Boeing 377 Stratocruiser Check-lists 1 NTRING TH COCKPIT BATTRY P MASTR P AVIONICS P NGIN SLCTOR GNRATORS VOLTMTR BUS APU FUL VALVS FUL BOOSTR PUMPS ANTI-IC SWITCHS CARBURTOR HAT INTRCOOLR FLAPS CLOSD

More information

524K WH / 544K WH. Hydraulically driven, proportionally controlled, fan aft of coolers. Engine Coolant Rating 34 deg. F ( 37 deg.

524K WH / 544K WH. Hydraulically driven, proportionally controlled, fan aft of coolers. Engine Coolant Rating 34 deg. F ( 37 deg. 524K WH / 544K WH Engine 524K WH 544K WH Manufacturer and Model John Deere PowerTech TM 6068H John Deere PowerTech E 6068H Non-Road Emission Standards Certified to EPA Tier 3 emissions Certified to EPA

More information

General Information. Ordering. Popular Downloads. Dimensions. Technical

General Information. Ordering. Popular Downloads. Dimensions. Technical AFS16Z-30-22-30 Products Low Voltag Products and Systms Control Products Contactors Block Contactors Gnral Information Extndd Product Typ: AFS16Z-30-22-30 Product ID: 1SBL176082R3022 EAN: 3471523158399

More information

EK-X Technical Data vertical order pickers EK-X

EK-X Technical Data vertical order pickers EK-X @ Tchnical Data vrtical ordr pickrs vrtical ordr pickr This spcification sht to VDI guidlin 2198 only givs th tchnical figurs for slctd quipmnt variants. Othr Elctric-ngin Prformanc data Dimnsions Tyrs/chassis

More information

MBF Series. Xe nâng Pallet chi phí thấp... Hàng chất lượng cao MB25 MB30 MB35 MB50. Frame and body

MBF Series. Xe nâng Pallet chi phí thấp... Hàng chất lượng cao MB25 MB30 MB35 MB50. Frame and body MBF Sris X nâng Pallt chi phí thấp... Hàng chất lượng cao MB25 MB30 MB35 MB50 Top quality dosn't nd to com at a high pric. Our low-cost hand pallt - trucks giv you vrything you nd to do th job - plus a

More information

310G 310SG ActionRental.com

310G 310SG ActionRental.com 0G 0SG BACKHOE LOADERS SPECIFICATIONS CONSTRUCTION EQUIPMENT DIVISION Engine 0G 0SG Type...John Deere 0D naturally aspirated standard / John Deere 0T John Deere 0T turbocharger altitude-compensating turbocharger

More information

555C WHEEL LOADER. Bucket Capacity 4.2 m 3 to 8.4 m 3 (5.5 yd 3 to 11.0 yd 3 ) Net Horsepower 238 kw (319 hp) Operating Weight kg (63,753 lb)

555C WHEEL LOADER. Bucket Capacity 4.2 m 3 to 8.4 m 3 (5.5 yd 3 to 11.0 yd 3 ) Net Horsepower 238 kw (319 hp) Operating Weight kg (63,753 lb) 555C WHEEL LOADER Net Horsepower 238 kw (319 hp) Bucket Capacity 4.2 m 3 to 8.4 m 3 (5.5 yd 3 to 11.0 yd 3 ) Operating Weight 28918 kg (63,753 lb) World class loader meeting high production requirements

More information

A V 50Hz / V 60Hz

A V 50Hz / V 60Hz A12-30-10 415-440V 50Hz / 440-460V 60Hz Products Low Voltag Products and Systms Control Products Contactors Block Contactors Gnral Information Extndd Product Typ: A12-30-10 415-440V 50Hz / 440-460V 60Hz

More information

S P E C I F I C A T I O N S

S P E C I F I C A T I O N S S P E C I F I C A T I O N S LX50 W H E E L L O A D E R Engine Rated Power : 44.1 kw (60 PS) Operating Weight : Canopy / Cab 4 695 kg (10 350 lb) / 4 845 kg (10 680 lb) Backhoe Bucket : ISO Heaped 0.6 m

More information

RBH65 BACKHOE LOADER

RBH65 BACKHOE LOADER RBH65 BACKHOE LOADER Shift productivity into a higher gear. 1 2 3 Whether you're digging, trenching, back-filling or handling material, we have a Rhino Backhoe Loader to meet your needs. Rhino Backhoe

More information

TRANSMISSION FINAL DRIVES BRAKES

TRANSMISSION FINAL DRIVES BRAKES S P E C I F I C A T I O N S 16 ENGINE Type...John Deere 4045D Naturally Aspirated Rated power @ 2,200 rpm...76 SAE gross hp (57 kw) 71 SAE net hp (53 kw) John Deere 4045T with altitude-compensating turbocharger...76

More information

Selection of pressure gauges The bowl is covered with a transparent bowl guard! Square embedded type pressure gauge.

Selection of pressure gauges The bowl is covered with a transparent bowl guard! Square embedded type pressure gauge. Modular F.R.L. Units ttr visibility & nvironmntal rsistanc Doubl layr dsign RoHS Slction of prssur gaugs Th bowl is covrd with a transparnt bowl guard! Intrchangability Intrchangabl with th prvious R sris

More information

wheel Loaders w170b w170b tc W170b lr w190b W190b lr

wheel Loaders w170b w170b tc W170b lr w190b W190b lr w170b w170b tc W170b lr w190b W190b lr wheel Loaders New Tier III Certified Engine with Four Work Modes Advanced Cooling System for Better Cooling & Balance Three Configurations Z-Bar, Tool Carrier, &

More information

TRANSMISSION FINAL DRIVES BRAKES

TRANSMISSION FINAL DRIVES BRAKES S P E C I F I C A T I O N S ENGINE Type...John Deere 4045T Turbocharged Rated power @ 2,200 rpm...88 SAE gross hp (66 kw) 80 SAE net hp (60 kw) Cylinders...4 Displacement...276 cu. in. (4.524 L) Fuel consumption,

More information

TRANSMISSION FINAL DRIVES BRAKES

TRANSMISSION FINAL DRIVES BRAKES S P E C I F I C A T I O N S ENGINE SE Type...John Deere 0T Turbocharged Rated power @,00 rpm... SAE gross hp (66 kw) 0 SAE net hp (60 kw) Cylinders... Displacement...76 cu. in. (. L) Fuel consumption,

More information

WHEEL LOADERS LW170.B. Specifications.

WHEEL LOADERS LW170.B. Specifications. WHEEL LOADERS Specifications LW170.B www.newhollandconstruction.com LW170.B DIMENSIONS 40 45 K L I O J B A N F E C P M D G H A. Height to top of cab...132.8 (3374 mm) B. Height to top of exhaust...114.8

More information

DL250TC TECHNICAL DATA

DL250TC TECHNICAL DATA DL250TC TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL ea. Doosan DL06 NUMBER OF CYLINDERS ea. 6 RATED FLYWHEEL POWER hp / rpm 163 / 2,100 (GROSS) (SAE J1995) kw / rpm 121 / 2,100 RATED

More information

wheel Loaders w110b w110b tc W110b lr w130b w130b tc W130b lr

wheel Loaders w110b w110b tc W110b lr w130b w130b tc W130b lr w110b w110b tc W110b lr w130b w130b tc W130b lr wheel Loaders New Tier III Certified Engines with Four Work Modes Advanced Cooling System for Better Cooling & Balance Three Configurations Z-Bar, Tool Carrier,

More information

555C WHEEL LOADER. Bucket Capacity 4.2 m 3 to 8.4 m 3 (5.5 yd 3 to 11.0 yd 3 ) Net Horsepower 238 kw (319 hp) Operating Weight kg (63,753 lb)

555C WHEEL LOADER. Bucket Capacity 4.2 m 3 to 8.4 m 3 (5.5 yd 3 to 11.0 yd 3 ) Net Horsepower 238 kw (319 hp) Operating Weight kg (63,753 lb) 555C WHEEL LOADER Net Horsepower 238 kw (319 hp) Bucket Capacity 4.2 m 3 to 8.4 m 3 (5.5 yd 3 to 11.0 yd 3 ) Operating Weight 28918 kg (63,753 lb) World class loader meeting high production requirements

More information

SAE Net Horsepower 185 hp. Operating Weights to 38,245 lb. (17345 kg) Courtesy of Machine.Market

SAE Net Horsepower 185 hp. Operating Weights to 38,245 lb. (17345 kg) Courtesy of Machine.Market SAE Net Horsepower 185 hp (138 kw) Operating Weights to 38,245 (17345 ) .'" -~ ENCINE BRAKES John Deereengineeredand manufactured.replaceable wet type cylinder liners provide superior heat dissipation,

More information

DL250 TECHNICAL DATA

DL250 TECHNICAL DATA DL250 TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL ea. Doosan DL06 NUMBER OF CYLINDERS ea. 6 RATED FLYWHEEL POWER hp / rpm 163 / 2,100 (GROSS) (SAE J1995) kw / rpm 121 / 2,100 RATED

More information

555C WHEEL LOADER. Bucket Capacity 5.5 yd 3 to 11.0 yd 3 (4.2 m 3 to 8.4 m 3 ) Net Horsepower 319 hp (238 kw) Operating Weight 63,753 lb (28918 kg)

555C WHEEL LOADER. Bucket Capacity 5.5 yd 3 to 11.0 yd 3 (4.2 m 3 to 8.4 m 3 ) Net Horsepower 319 hp (238 kw) Operating Weight 63,753 lb (28918 kg) 555C WHEEL LOADER Net Horsepower 319 hp (238 kw) Bucket Capacity 5.5 yd 3 to 11.0 yd 3 (4.2 m 3 to 8.4 m 3 ) Operating Weight 63,753 lb (28918 kg) World class loader meeting high production requirements

More information

TL12 Compact Track Loader

TL12 Compact Track Loader Those in the know, know Takeuchi TL12 Compact Track Loader TL8 TL10 TL12 TL12V2 Product Features & Specifications ENGINE - EPA Interim Tier 4 Compliant - Turbocharged and Intercooled - DOC+DPF Exhaust

More information

Specifications WHEEL LOADERS LW130.B LONG REACH.

Specifications WHEEL LOADERS LW130.B LONG REACH. WHEEL LOADERS Specifications LW130.B LONG REACH www.newhollandconstruction.com LW130.B DIMENSIONS 40 45 K L I O J B A N F E C P M D G H A. Height to top of cab...133.9 (3400 mm) B. Height to top of exhaust...114.8

More information

Pressure system with spin-on filter & cooler Dual-stage dry type with safety element and evacuator valve

Pressure system with spin-on filter & cooler Dual-stage dry type with safety element and evacuator valve Engine Manufacture and Model Non-Road Emission Standards Displacement Net Peak Power (ISO 9249) Net Peak Torque (ISO 9249) John Deere PowerTechTM4045T turbocharged, standard EPA Tier 2 / EU Stage II emissions

More information

LX80. Note: General purpose bucket with bolt on cutting edges. I J K. Unit : mm

LX80. Note: General purpose bucket with bolt on cutting edges. I J K. Unit : mm S P E C I F I C A T I O N S LX80 W H E E L L O A D E R n Engine Rated Power : 80.9 kw (110 PS) n Operating Weight : Canopy / (Rops / Fops) Cab 8 120 kg / 8 610 kg n Backhoe Bucket : ISO Heaped - 1.9 40

More information

ZAXIS 270LC-3 Engine Net Peak Power: 188 hp (140 2,100 rpm Operating Weight: 63,425 lb. ( kg) Backhoe Bucket: 1.74 cu. yd. (1.

ZAXIS 270LC-3 Engine Net Peak Power: 188 hp (140 2,100 rpm Operating Weight: 63,425 lb. ( kg) Backhoe Bucket: 1.74 cu. yd. (1. ZAXIS 270LC-3 Engine Net Peak Power: 188 hp (140 kw) @ 2,100 rpm Operating Weight: 63,425 lb. (28 770 kg) Backhoe Bucket: 1.74 cu. yd. (1.34 m 3 ), 42 in. (1065 mm) ZAXIS 270LC-3 SPECIFICATIONS Engine

More information

TL8 Compact Track Loader

TL8 Compact Track Loader Those in the know, know Takeuchi TL8 Compact Track Loader TL8 TL10 TL12 TL12V2 Product Features & Specifications ENGINE - U.S. EPA Final Tier 4 Emission Compliant - Turbocharged - DOC+DPF Exhaust After

More information

PIglide AT3 Linear Stage with Air Bearings

PIglide AT3 Linear Stage with Air Bearings PIglid AT3 Linar Stag with Air Barings High Prformanc Nanopositioning Stag A-123 Idal for scanning applications or highprcision positioning Clanroom compatibl Siz of th motion platform 210 mm 210 mm Travl

More information

Cummins / 6CTA8.3-C or Rhino Tier 2 (Tier 3, Tier 4) 6 8.3(506) 188(252) Direct Injection Turbocharged, air-to-air charge air cooler COOLING Fan Drive

Cummins / 6CTA8.3-C or Rhino Tier 2 (Tier 3, Tier 4) 6 8.3(506) 188(252) Direct Injection Turbocharged, air-to-air charge air cooler COOLING Fan Drive 330 EXCAVATOR ENGINE Engine Make/ Engine Model Emission Rating (optional) Cylinders Displacement L (cu. In) Net Power kw (Hp) @2,200 rpm Fuel System Aspiration Cummins / 6CTA8.3-C or Rhino Tier 2 (Tier

More information

560E WHEEL LOADER. Net Horsepower 319 kw (427 hp) 5.35 m 3 to 11.5 m kg (92,549 lb) (7 yd 3 to 15 yd 3 )

560E WHEEL LOADER. Net Horsepower 319 kw (427 hp) 5.35 m 3 to 11.5 m kg (92,549 lb) (7 yd 3 to 15 yd 3 ) 560E WHEEL LOADER Net Horsepower 319 kw (427 hp) Bucket Capacity Operating Weight 5.35 m 3 to 11.5 m 3 41 980 kg (92,549 lb) (7 yd 3 to 15 yd 3 ) Big machine comfort and power with fast cycle times and

More information

BACKHOE LOADERS CONTENTS

BACKHOE LOADERS CONTENTS BACKHOE LOADERS CONTENTS Features...............................-1 Specifications...........................-3 416E:......................-6 Lift Capacities.........................-8 420E/420E IT:.....................-11

More information

560E WHEEL LOADER. Bucket Capacity 7 yd 3 to 15 yd 3 (5.35 m 3 to 11.5 m 3 ) Net Horsepower 427 hp (319 kw) Operating Weight 92,549 lb ( kg)

560E WHEEL LOADER. Bucket Capacity 7 yd 3 to 15 yd 3 (5.35 m 3 to 11.5 m 3 ) Net Horsepower 427 hp (319 kw) Operating Weight 92,549 lb ( kg) 560E WHEEL LOADER Net Horsepower 427 hp (319 kw) Bucket Capacity 7 yd 3 to 15 yd 3 (5.35 m 3 to 11.5 m 3 ) Operating Weight 92,549 lb (41 980 kg) Big machine comfort and power with fast cycle times and

More information

COMPACT TRACK LOADER. From World First to World Leader

COMPACT TRACK LOADER. From World First to World Leader COMPACT TRACK LOADER TL6R From World First to World Leader Product Features & Specifications ENGINE - U.S. EPA Final Tier 4 Emission Compliant - Turbocharged - DOC+DPF Exhaust After Treatment - Active

More information

SKID STEER LOADER From World First to World Leader

SKID STEER LOADER From World First to World Leader TS80R2 SKID STEER LOADER From World First to World Leader Product Features & Specifications ENGINE - Four Cylinder Turbocharged Deutz Diesel Engine - U.S. EPA FINAL TIER 4 Emission Compliant - Maintenance

More information

Sliding clamp, compact single acting with spring return

Sliding clamp, compact single acting with spring return Sliding clamp, compact singl acting with spring rturn adaptr Clamping block Prss bd Hydraulic clamping block Optimun adaptation in narrow construction spacs Applications: th compact sliding clamp is a

More information

534E WHEEL LOADER. Bucket Capacity 2.6 m 3 to 5.7 m 3 (3.4 yd 3 to 7.5 yd 3 ) Net Horsepower 169 kw (227 hp) Operating Weight kg (45,917 lb)

534E WHEEL LOADER. Bucket Capacity 2.6 m 3 to 5.7 m 3 (3.4 yd 3 to 7.5 yd 3 ) Net Horsepower 169 kw (227 hp) Operating Weight kg (45,917 lb) 534E WHEEL LOADER Net Horsepower 169 kw (227 hp) Capacity 2.6 m 3 to 5.7 m 3 (3.4 yd 3 to 7.5 yd 3 ) Operating Weight 20828 kg (45,917 lb) The best in the business for productivi features and a wide choice

More information

Those in the know, know Takeuchi. TL12V2 Track Loader TL12V2

Those in the know, know Takeuchi. TL12V2 Track Loader TL12V2 Those in the know, know Takeuchi TL12V2 Track Loader TL8 TL10 TL12 TL12V2 ENGINE - U.S. EPA Final Tier 4 Emission Compliant - Turbocharged and Intercooled - DOC+DPF+SCR Exhaust After Treatment - Active

More information

BACKHOE LOADERS CONTENTS

BACKHOE LOADERS CONTENTS BACKHOE LOADERS CONTENTS Features...............................-1 Specifications...........................-3 416E:......................-6 Lift Capacities.........................-8 420E/420E IT:......................-9

More information

521F/XT/XR ARTICULATED

521F/XT/XR ARTICULATED 521F/XT/XR ARTICULATED WHEEL LOADER TIER 4 INTERIM CERTIFIED PRELIMINARY engine Model CNH CFPXL04.5SCB, F4HFE413J Tier4a/Stage 3b 4-stroke, turbocharged Type Cylinders 4 Bore/Stroke 4.09 in x 5.20 in (104

More information

From World First to World Leader

From World First to World Leader HYDRAULIC EXCAVATOR TB235-2 From World First to World Leader Product Features & Specifications ENGINE - U.S. EPA Final Tier 4 - Automatic Fuel Bleed System - Dual Element Air Filter - Automatic Idle ELECTRICAL

More information

Doosan Infracore DL220 TECHNICAL DATA

Doosan Infracore DL220 TECHNICAL DATA Doosan Infracore Construction Equipment DL220 TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL ea. Doosan DL06 NUMBER OF CYLINDERS ea. 6 RATED FLYWHEEL POWER hp / rpm 148 / 2,200 (GROSS)

More information

K-SERIES HP WASTE HANDLERS

K-SERIES HP WASTE HANDLERS K-SERIES 146 304 HP WASTE HANDLERS Haste moves waste. 2 If yours is a vast wasteland, our K-Series are your kind of waste handlers. These production machines come fully fortified to tackle tough transfer-station

More information

Engine. Engine Torque. Weights. Steering. 924G Wheel Loader specifications

Engine. Engine Torque. Weights. Steering. 924G Wheel Loader specifications Engine Model Caterpillar 3056E DIT ATAAC Rated Net Power @ 2,300 rpm SAE J1349 96 kw 129 hp ISO 9249 97 kw 130 hp EEC 80/1269 97 kw 130 hp Maximum Net Power @ 1,900 rpm SAE J1349 102 kw 137 hp ISO 9249

More information

721E/XT/XR. Transmission 4F/3R Proportional w/electronic Control Module torque sensing autoshift/manual shift and modulation

721E/XT/XR. Transmission 4F/3R Proportional w/electronic Control Module torque sensing autoshift/manual shift and modulation 721E/XT/XR ARTICULATED WHEEL LOADER TIER III CERTIFIED ENGINE Model Type Case Family IV 667TA/EED, Tier III certified 4-stroke, turbocharged and air-to-air cooled Cylinders 6 Bore/Stroke 4.09 in x 5.20

More information

JCB BACKHOE LOADER 2CX 12 FT

JCB BACKHOE LOADER 2CX 12 FT JCB BACKHOE LOADER 1 FT B C F E H D A G STATIC DIMENSIONS JCB 1FT features four wheel drive, four wheel steering, four equal sized tires, a heavy duty one piece mainframe, componentized driveline and fully

More information

821E/XR. Transmission 4F/3R Proportional w/electronic Control Module torque sensing autoshift/manual shift and modulation

821E/XR. Transmission 4F/3R Proportional w/electronic Control Module torque sensing autoshift/manual shift and modulation 821E/XR ARTICULATED WHEEL LOADER TIER III CERTIFIED ENGINE Model Type Case Family IV, 667TA/EBD Tier III Certified 4-stroke, turbocharged and air-to-air cooled Cylinders 6 Bore/Stroke 4.09 in x 5.20 in

More information

FORKLIFTS. Final Drives Type...heavy-duty, inboard planetary final drives evenly distribute shock loads over three gears

FORKLIFTS. Final Drives Type...heavy-duty, inboard planetary final drives evenly distribute shock loads over three gears 485E 486E 488E FORKLIFTS SPECIFICATIONS CONSTRUCTION EQUIPMENT DIVISION JD Engine 485E / 486E / 488E Type...John Deere 4045D Naturally Aspirated Rated power @ 2,200 rpm...73 SAE net hp (54.4 kw) / 78 SAE

More information

SKID STEER LOADER From World First to World Leader

SKID STEER LOADER From World First to World Leader TS80V2 SKID STEER LOADER From World First to World Leader Product Features & Specifications ENGINE - Four Cylinder Turbocharged Deutz Diesel Engine - U.S EPA Final Tier 4 Emission Compliant - Maintenance

More information

EJC 417 A COMPACT TRUCK DESIGNED FOR THE MOST CHALLENGING WORK CAPACITY: 17 SHORT TONS (15.4 TONNES) TECHNICAL SPECIFICATION 2-3

EJC 417 A COMPACT TRUCK DESIGNED FOR THE MOST CHALLENGING WORK CAPACITY: 17 SHORT TONS (15.4 TONNES) TECHNICAL SPECIFICATION 2-3 2-3 EJC 417 TECHNICAL SPECIFICATION A COMPACT TRUCK DESIGNED FOR THE MOST CHALLENGING WORK CAPACITY: 17 SHORT TONS (.4 TONNES) Revision Date: /4/01 2-4 EJC 417 Main Dimensions 88 (2235) 8 (3) 11 (279)

More information

TS80V2 Skid Steer Loader

TS80V2 Skid Steer Loader Those in the know, know Takeuchi TS80V2 Skid Steer Loader TS50R TS50V TS60R TS60V TS80R2 TS80V2 Product Features & Specifications ENGINE --Four Cylinder Turbocharged Deutz Diesel Engine -U.S. - EPA FINAL

More information

LOADER WITH COUPLER. SAE Net Horsepower 115 hp. Operating Weights to 23,451 lb. (10637 kg)

LOADER WITH COUPLER. SAE Net Horsepower 115 hp. Operating Weights to 23,451 lb. (10637 kg) .. II LOADR WITH COUPLR SA et Horsepoer 115 hp (86 kw) Operating Weights 23,451 lb. (10637 kg) 544-H LOADR MASTh. Model shon may include options GI PRFORMAC m lib-it hp IkW 542 I 400 1401104 5 475 I 350

More information

BKF Off-line filter / cooler unit

BKF Off-line filter / cooler unit BKF Off-lin filtr / coolr unit Compact dsign Filling function optional (BKF 18/3) Easy installation Low- nois pump DIN filtr lmnts Efficint plat hat xchangr DE 38 1/14 Pag 1/6 Bühlr Tchnologis GmbH D -

More information

TL12 Compact Track Loader

TL12 Compact Track Loader T T TL8 TL12 Compact Track Loader TL10 TL12 TL12V 2 ENGINE - - Turbocharged and Intercooled - DOC+DPF Exhaust After Treatment - Automatic Fuel Bleed System - Active Power Control Power Management System

More information

TS80V2 Skid Steer Loader

TS80V2 Skid Steer Loader Those in the know, know Takeuchi TS80V2 Skid Steer Loader TS50R TS50V TS60R TS60V TS80R2 TS80V2 Specifications TOUGH, POWERFUL, RELIABLE Pressure Relieving Coupler Flat Faced Couplers High Flow Hydraulics

More information

621E/XT/XR. Transmission 4F/3R Proportional w/electronic Control Module torque sensing autoshift/manual shift and modulation

621E/XT/XR. Transmission 4F/3R Proportional w/electronic Control Module torque sensing autoshift/manual shift and modulation 621E/XT/XR ARTICULATED WHEEL LOADER TIER III CERTIFIED ENGINE Model Type Case Family IV, 667TA/EDB, Tier III certified 4-stroke, turbocharged and air to air cooled Cylinders 6 Bore/Stroke 4.11 in x 5.20

More information

Speed Controller with One-touch Fittings

Speed Controller with One-touch Fittings In-lin Typ 4 typs of mounting variations Dirct mounting Indx plat It is possibl to idntify th product whn multipl controllrs ar mountd and idntify th flow dirction by attaching an idntification labl. Controlld

More information

121F COMPACT WHEEL LOADER TIER 4 FINAL CERTIFIED

121F COMPACT WHEEL LOADER TIER 4 FINAL CERTIFIED 121F COMPACT WHEEL LOADER TIER 4 FINAL CERTIFIED ENGINE Model Emissions Certification Type FPT F5H FL463 C*F001 Tier 4 Final 4-stroke Cylinders 4 Bore/ 3.9 x 4.3 in (99 x 110 mm) Displacement 207 in 3

More information

DRIVETRAIN. NOTE: Travel speeds at full engine throttle. ELECTRICAL

DRIVETRAIN. NOTE: Travel speeds at full engine throttle. ELECTRICAL 321D Articulated Wheel Loader ENGINE Model... Perkins 1004-42 Type... 4-stroke, turbocharged Cylinders... 4 Bore/Stroke... 4.06 x 5.00 (105 X 127 mm) Displacement... 258 in 3 (4.23 L) Fuel injection...

More information

21F COMPACT WHEEL LOADER TIER 4 FINAL CERTIFIED

21F COMPACT WHEEL LOADER TIER 4 FINAL CERTIFIED 21F COMPACT WHEEL LOADER TIER 4 FINAL CERTIFIED ENGINE Model Emissions Certification Type FPT F5H FL463 B*F001 Tier 4 Final 4-stroke Cylinders 4 Bore/ 3.9 x 4.3 in (99 x 110 mm) Displacement 207 in 3 (3.4

More information

420E/420E IT Specifications

420E/420E IT Specifications Engine Engine Model (Standard) Gross Power SAE J1995 Gross Power ISO 14396 Net Power SAE J1349 Net Power ISO 9249 Net Power EEC 80/1269 Net Peak Power @ 1,800 rpm SAE J1349 Net Peak Power @ 1,800 rpm ISO

More information

EJC 430 TECHNICAL SPECIFICATION. Payload: 30 tons (27.3 tonnes) Dump box volume: 20.7 yd³ (15.3 m³) We are an ISO 9001 Registered Company EJC 430 1

EJC 430 TECHNICAL SPECIFICATION. Payload: 30 tons (27.3 tonnes) Dump box volume: 20.7 yd³ (15.3 m³) We are an ISO 9001 Registered Company EJC 430 1 EJC 430 1 EJC 430 TECHNICAL SPECIFICATION Payload: 30 tons (27.3 tonnes) Dump box volume:.7 yd³ (.3 m³) 02, EJC Loaders Division reserves the right to change this 2 EJC 430 General Arrangement 65 o 430

More information

L1204E I L1506E I L1706E I L1806E I L2106E I L2606E I L2706E

L1204E I L1506E I L1706E I L1806E I L2106E I L2606E I L2706E LoadersWheeled Loader L1204E I L1506E I L1706E I L1806E I L2106E I L2606E I L2706E Production drive Customer inspir Serious productivity demands serious inspiration. Many of the innovative features and

More information

9.50M BACKHOE LOADER. Net Horsepower 70 kw (95 hp) Digging depth, boom retracted 4760 mm (15'7") Digging depth, boom extended 5860 mm (19'3")

9.50M BACKHOE LOADER. Net Horsepower 70 kw (95 hp) Digging depth, boom retracted 4760 mm (15'7) Digging depth, boom extended 5860 mm (19'3) 9.50M BACKHOE LOADER Net Horsepower 70 kw (95 hp) Operating Weight 8900 kg (19,621 lb) Digging depth, boom retracted 4760 mm (15'7") Digging depth, boom extended 5860 mm (19'3") Safe ROPS/FOPS operator

More information

Pilot control hydraulic system Pump (1)... Gear design Maximum capacity gpm (21 L/min) Relief pressure psi (3900 kpa)

Pilot control hydraulic system Pump (1)... Gear design Maximum capacity gpm (21 L/min) Relief pressure psi (3900 kpa) 9020B Excavator ENGINE Model... Case 4TA-390 Type... 4-stroke, turbocharged and aftercooled Cylinders... 4 Bore/Stroke... 4.02 x 4.72 (102 x 120 mm) Displacement... 239 in 3 (3.9 L ) Fuel injection...

More information

930G Wheel Loader. Engine Torque. Engine Power. Engine Speed. Engine Speed. Net Gross. rpm. rpm

930G Wheel Loader. Engine Torque. Engine Power. Engine Speed. Engine Speed. Net Gross. rpm. rpm Net Gross ft-lb N m 443 600 Engine Torque 369 295 221 148 500 400 300 200 Engine Torque 74 100 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 rpm Engine Speed hp kw 161 120 Engine Power

More information

WASTE HANDLERS 724J 744J

WASTE HANDLERS 724J 744J 2 5 0 2 8 8 N E T P E A K H O R S E P O W E R J WASTE HANDLERS 724J 744J 724J Waste Handler 250 net peak hp @ 1,800 rpm 5.0 7.0-cu.-yd. buckets 49,976 51,546-lb. operating weight 13-ft. 10-in. standard

More information

HYDRAULICS. Pilot control hydraulic system Pump (1)... Gear design Maximum capacity gpm (21 L/min) Relief pressure psi (3900 kpa)

HYDRAULICS. Pilot control hydraulic system Pump (1)... Gear design Maximum capacity gpm (21 L/min) Relief pressure psi (3900 kpa) 9020B Excavator ENGINE Model... Case 4TA-390 Type... 4-stroke, turbocharged and aftercooled Cylinders... 4 Bore/Stroke... 4.02 x 4.72 (102 x 120 mm) Displacement... 239 in 3 (3.9 L ) Fuel injection...

More information

TS80V2 Ski d Steer Loader

TS80V2 Ski d Steer Loader TS80V2 Ski d Steer Loader Those in the know, know Takeuchi TS50R TS50V TS60R TS60V TS80R 2 TS80V 2 Product Features & Speciications ENGINE HYDRAULIC AND WORKING EQUIPMENT - Four Cylinder Turbocharged Deutz

More information

TF General Information. Ordering. Dimensions. Popular Downloads. Technical

TF General Information. Ordering. Dimensions. Popular Downloads. Technical TF42-7.6 Products Low Voltag Products and Systms Control Products Contactors Thrmal Ovrload Rlays Gnral Information Extndd Product Typ: TF42-7.6 Product ID: 1SAZ721201R1040 EAN: 4013614398117 Catalog Dscription:

More information

HYDRAULICS. Pilot control hydraulic system Pump (1)... Gear design Maximum capacity gpm (20 L/min) Relief pressure psi (3900 kpa)

HYDRAULICS. Pilot control hydraulic system Pump (1)... Gear design Maximum capacity gpm (20 L/min) Relief pressure psi (3900 kpa) 9010B Excavator ENGINE Model... Case 4TA-390 Type... 4-stroke, turbocharged and aftercooled Cylinders... 4 Bore/Stroke... 4.02 x 4.72 (102 x 120 mm) Displacement... 239 in 3 (3.9 L) Fuel injection... Direct

More information

Sandvik TH320. General Arrangement

Sandvik TH320. General Arrangement Technical Specification TH3-Revision 1 1/10 General Arrangement 65 96 in (2438) 179 in (4547) TH3 13 TH3 90 in (2286) 12 in (305) 54 in (1372) 358 in (9093) 174 in (44) 83 in (2108) 13 in (330) 87 in (2210)

More information

TF General Information. Ordering. Dimensions. Popular Downloads. Technical

TF General Information. Ordering. Dimensions. Popular Downloads. Technical TF65-47 Products Low Voltag Products and Systms Control Products Contactors Thrmal Ovrload Rlays Gnral Information Extndd Product Typ: TF65-47 Product ID: 1SAZ811201R1004 EAN: 4013614482946 Catalog Dscription:

More information

416D Backhoe Loader Tires Tubeless, nylon, loader-design tires.

416D Backhoe Loader Tires Tubeless, nylon, loader-design tires. D Backhoe Loader Tires Tubeless, nylon, loader-design tires. Ply Type Size Rating WD Bias Front L x Rear 9. x WD Bias Front./ x Rear 9. x WD Radial Front / x R radial Rear 9. x radial WD Combination Front

More information

FRAMED PIVOT DOOR INSTALLATION INSTRUCTIONS

FRAMED PIVOT DOOR INSTALLATION INSTRUCTIONS FRAMED PIVOT DOOR INSTALLATION INSTRUCTIONS QCI5001 Rv 0 Pag 1 Crtifid 06/21/2016 MAINTENANCE: Two primary matrials ar usd to manufactur your nw bath nclosur: tmprd glass and anodizd aluminum. To assur

More information

WASTE HANDLERS 544J 624J 644J

WASTE HANDLERS 544J 624J 644J 1 6 7 2 3 2 N E T H O R S E P O W E R J WASTE HANDLERS 544J 624J 644J 544J Waste Handler 167 net hp @ 1,900 rpm 4.0 5.0-cu.-yd. buckets 22,090-lb. full-turn tipping load 21,117-lb. breakout force 34,768-lb.

More information

621F/XT/XR ENGINE (CONTD.)

621F/XT/XR ENGINE (CONTD.) 621F//XR WHEEL LOADER TIER 4 INTERIM CERTIFIED ENGINE Make Model Type Cylinders Bore / Stroke Case / FPT F4HFE613Z Tier 4 Interim certified 4-stroke, turbocharged and air-to-air-cooled 6-cylinder in-line

More information

DL350 TECHNICAL DATA

DL350 TECHNICAL DATA DL350 TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL ea. Doosan DL08 NUMBER OF CYLINDERS ea. 6 RATED FLYWHEEL POWER (GROSS) hp / rpm 232 / 2,000 (SAE J1995) kw / rpm 172 / 2,000 RATED

More information

Air Combination Air Filter + Regulator + Lubricator. AC20-A to AC40-A. How to Order. Description. Rc NPT 1/8 1/4 3/8 1/2 3/4

Air Combination Air Filter + Regulator + Lubricator. AC20-A to AC40-A. How to Order. Description. Rc NPT 1/8 1/4 3/8 1/2 3/4 ourtsy of /lodyn/ydradyn otion ontrol ydraulic Pnumatic Elctrical chanical (8) 26-8 www.cmafh.com I ymbol w r t y L ot ) Option ttachmnt mi-standard 3 Thrad typ a b c d f g h 2 Port siz ir ombination ir

More information

FORESTRY E Q U I P M E N T G SKIDDERS 540G-III 548G-III

FORESTRY E Q U I P M E N T G SKIDDERS 540G-III 548G-III FORESTRY E Q U I P M E N T G SKIDDERS 540G-III 548G-III Operator Station: Comforts such as swivel seat, ergonomically located controls, and all-season climate controls help keep productivity up. Grapple:

More information

EJC 65 UNIQUE ADAPTABILITY CAPACITY: 6500 LBS (2900 KG) TECHNICAL SPECIFICATION 1-3

EJC 65 UNIQUE ADAPTABILITY CAPACITY: 6500 LBS (2900 KG) TECHNICAL SPECIFICATION 1-3 1-3 EJC 65 TECHNICAL SPECIFICATION UNIQUE ADAPTABILITY CAPACITY: 6500 LBS (2900 KG) 1-4 EJC 65 Main Dimensions 65 EJC 65 1-5 SANDVIK TAMROCK EJC Loaders Division EJC 65 Specification Sheet January 1, 2000

More information

Unprecedented precision and ease of operation.

Unprecedented precision and ease of operation. REX130 EXCAVATOR Unprecedented precision and ease of operation. This Rhino excavator is loaded with enhancements that not only increase productivity and uptime, but lower daily operating costs, too. A

More information

521G Z-BAR/XT/XR WHEEL LOADER TIER 4 FINAL CERTIFIED

521G Z-BAR/XT/XR WHEEL LOADER TIER 4 FINAL CERTIFIED 521G Z-BAR/XT/XR WHEEL LOADER TIER 4 FINAL CERTIFIED ENGINE Make Model Emissions Certification Emissions Technology Type Cylinders Bore/Stroke FPT F4HFE413NB Tier 4 Final SCR/DOC 4-stroke, turbocharged

More information

Volvo Engines Specifications

Volvo Engines Specifications Volvo Engins Spcifications B4 B Dscription Usd from 1947 to 19 in th 444 Sris 1.4 litrs 4 cylindrs in lin Ovrhad valvs 6 Volts lctrical systm Firing ordr 1342 clockwis Oil capacity with filtr: Gnral Spcifications

More information

939C Hystat Track-Type Loader

939C Hystat Track-Type Loader Engine Four-stroke cycle, in-line six cylinder Cat 3046 turbocharged diesel engine. Ratings at 2400 RPM* kw HP Gross power 74.6 100 Net power 67.9 90 The following ratings apply at 2400 RPM when tested

More information

821F/XR WHEEL LOADERS

821F/XR WHEEL LOADERS 821F/XR WHEEL LOADERS ENGINE Make Model Type Cylinders Bore/Stroke FPT F4HFE613X Tier 2 certified 4-stroke, turbocharged 6-cylinder in-line 4.09 in x 5.20 in (104 X 132 mm) Displacement 411 in 3 (6.7 L)

More information

ROPS and FOPS canopy provides A large comfortable operators area. Machines with a cab get air conditioning as standard

ROPS and FOPS canopy provides A large comfortable operators area. Machines with a cab get air conditioning as standard Fully tilting hood for easy engine access designed to get your job done. Tier 3 94hp (70kw) charge air cooled engine for smooth and economical operation ROPS and FOPS canopy provides A large comfortable

More information

921F. NOTE: Gross horsepower and torque per SAE J1995. Net horsepower and torque per SAE J1349.

921F. NOTE: Gross horsepower and torque per SAE J1995. Net horsepower and torque per SAE J1349. 921F Z-BAR/XR WHEEL LOADER TIER 4 FINAL CERTIFIED ENGINE Make Model Emissions Certification Type Cylinders Bore/Stroke FPT F4HFE613 Tier 4 Final 4-stroke, turbocharged and air-to-air cooled 6-cylinder

More information

JCB WHEEL LOADER 426 HT TIER III JCB WHEEL LOADER 426 HT TIER III. STATIC DIMENSIONS Standard height arm. STATIC DIMENSIONS High lift arm

JCB WHEEL LOADER 426 HT TIER III JCB WHEEL LOADER 426 HT TIER III. STATIC DIMENSIONS Standard height arm. STATIC DIMENSIONS High lift arm MAX. NGIN POWR: 165hp (123kW) MAX. OPRATING WIGHT: 3247lb(14210kg) MAX. LOADR CAPACITY: 3.5yd3(2.7m3) STATIC DIMNSIONS High lift arm G J H1 H C D A STATIC DIMNSIONS Standard height arm STATIC DIMNSIONS

More information

Cat BACKHOE LOADER. breakout forces and aggressiveness in hard bank applications. to the operator while roading.

Cat BACKHOE LOADER. breakout forces and aggressiveness in hard bank applications. to the operator while roading. Cat F BACKHOE LOADER The Cat F Backhoe Loader delivers performance, increased fuel efficiency, superior hydraulic system and an all new operator station. The F features the following: Ergonomic Operator

More information

821G Z-BAR/XR WHEEL LOADER TIER 4 FINAL CERTIFIED

821G Z-BAR/XR WHEEL LOADER TIER 4 FINAL CERTIFIED 821G Z-BAR/XR WHEEL LOADER TIER 4 FINAL CERTIFIED ENGINE Make Model Emissions Certification Emissions Technology Type Cylinders Bore/Stroke FPT F4HFE613S Tier 4 Final SCR/DOC 4-stroke, turbocharged and

More information

921G Z-BAR/XR WHEEL LOADER TIER 4 FINAL CERTIFIED

921G Z-BAR/XR WHEEL LOADER TIER 4 FINAL CERTIFIED 921G Z-BAR/XR WHEEL LOADER TIER 4 FINAL CERTIFIED ENGINE Make Model Emissions Certification Emissions Technology Type Cylinders Bore/Stroke FPT F4HFE613R Tier 4 Final SCR/DOC 4-stroke, turbocharged and

More information

721F. Transmission: 4F/3R proportional w/ Electronic Control Module torque sensing autoshift/manual shift and modulation

721F. Transmission: 4F/3R proportional w/ Electronic Control Module torque sensing autoshift/manual shift and modulation 721F WASTE HANDLER Articulated Wheel Loader Tier 4 Interim Certified ENGINE Make Model Type Cylinders Bore/Stroke Case/FPT F4HFE613Y Tier 4 Interim Certified 4-stroke, turbocharged and air-to-air-cooled

More information