Watts. VS Series. Special Features. Environmental. Safety
|
|
- Shanon Dominic Hutchinson
- 6 years ago
- Views:
Transcription
1 Watts V eries pecial Features V1B2H W total Power factor correction IEC 5552 harmonic distortion compliance CIPR 22, E55022 evel B conducted / radiated EMI E61000 immunity standards European CE Mark Current share on all outputs Remote sense on all outputs verload protection on all outputs Voltage adjustment on all outputs Margining on all outputs ACKsignal (logics 1 or 0 ) Global DC K (logics 1 or 0 ) DCK signal and status indicator EDon all outputs Global and individual module inhibits/enable 3 year warranty 2500 W with 3phase input V3D2C W total V W total Environmental perating temperature: 10 C to 50 C (derate each output linearly to 60% at 70 C) 40 C max. for reverse air (option #1) hock/vibration: MilHdbk 810E Humidity: 95% noncondensing V89D W total (case limit) torage temperature: 55 C to 85 C emperature coefficient: 0.02% per C Cooling: Internal DC fan 24V afety V4/ W 1 U U CA CA C22.2 o VDE E60950 CB Certificate and report CE Mark E echnical upport: (888) 41AEC or (407) Americas: (760) Europe (UK) 44 (1384) Asia (HK)
2 AMERICA EURPE AIA 5810 Van Allen Way Carlsbad, CA elephone: Facsimile: Astec House, Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1X, UK elephone: 44 (1384) Facsimile: 44 (1384) Units , evel 21 ower1, Metroplaza 223, Hing Fong Road Fwai Fong, ew erritories Hong Kong elephone: Facsimile: Electrical pecs utput V eries Fuse rating 600 V / 25 A (internal)1ø 250 V / 20 A (internal)3ø voltage VAC 1Ø V1, V3 & V4 (ee operating curve) VAC 3Ø V6, V8 & V9 Frequency 47 to 440 Hz Inrush current 40 A peak max. Efficiency 75% 82% Power factor 0.99 typical (0.9 on V6, V8 & V9) urnon time AC / 1 sec; Inhibit / 100 ms max. EMIfilter CIPR 22, E55022 evel B conducted/radiated eakage current 2 ma max. at 240 VAC Holdover storage 20 ms min. / 40 ms typical independent of VAC ACK warning time >5 ms (power fail) oss of phase n V6, V8 & V9, unit will continue to operate with loss of phase 2200 perating Curve Adjustment range Margining ine/load reg Ripple Dynamic response Recovery time vervoltage protection verload protection hort circuit protection Reverse voltage protection hermal protection Remote sense ingle wire parallel witching frequency ±10% minimum ±46% nominal 0.2% or 5 mv max. RM: 0.1% or 10 mv PP: 1.0% or 50 mv Bandwidth limited to 20 MHz 2% or 100 mv with 25% load step (any output) o within 1% in <300 µsec 25 V 122% to 134% of output voltage; 1248 V 110% to 120%; recycle AC Main: 105% to 120% of rated current Auxiliaries:105% to 140% Protected for continuous short circuit, recovery automatic 100% of rated output current Each module thermally protected. module: auto recovery. utput modules; recycle AC. Up to 0.5 V total drop Current share to 2% of total rated current 200 KHz ( W module, 400 KHz) 2000 DC K 2% to 6% of nominal MAXIMUM UPU PWER (W) utput/utput isolation >1 Megohm IPU AC VAGE 50/60Hz ingle Phase 2
3 Common Examples and pecifications Case size 1 = 5 inch, 2 slot, 1500 W max 1Ø 3 = 8 inch, 4 slot, 2000 W max 1Ø 4 = 11 inch, 6 slot, 2000 W max 1Ø 6 = 5 inch, 2 slot, 1500 W max 3Ø 8 = 8 inch, 4 slot, 2500 W max 3Ø 9 = 11 inch, 6 slot, 2500 W max 3Ø (ame for Each lot) ption Codes 0 = no options 1 = rear air exhaust (40 C max.) 3 = set unit for global enable 5 = options 1 & 3 UE YFR MDIFIED ADARD, CUFACRY Indicates CE compliance utput Module Code A = 300 W single 1 slot B = 600 W single 1 slot C = 900 W single 2 slots D = 1200 W single 2 slots E = 250 W dual 1 slot F = 250 W triple 1 slot G = 500 W dual 1 slot H = 500 W triple 1 slot K = 750 W single 1 slot = 1500 W single 2 slot Example (more on next page): utput Voltage Code 0 = 2V 1 = 3.3 V 2 = 5 V 3 = 12 V 4 = 15 V 5 = 24 V 6 = 28 V 7 = 36 V 8 = special voltage (consult factory) 9 = 48 V 5 inch case (2 slots available) utput Current V 1 K 2 G CE lot 1 1: 150A Configuration Rules 1. mit digits that do not apply. 2. a. pecify modules from lowest number of outputs to highest. b. If number of outputs are equal, specify from highest to lowest power increments. c. If power increments are equal, specify from highest to lowest current. 3. All model configurations created using this selection guide represent standard products with standard availability and lead times. 4. If slots are left empty, a blank panel will be automatically installed. lot 2 2: 21A 3: 20A o options o paralleling Parallel Code V1 and V6 available slots V3 and V8 available slots V4 and V9 available slots Parallel Codes 0 = no parallel 1 = 1 & 2 2 = 2 & 3 3 = 3 & 4 4 = 1 & 2 & 3 5 = 2 & 3 & 4 6 = 1 & 2 3 & 4 7 = 1 & 2 & 3 & 4 8 = 3 & 4 5 & 6 9 = 1 & 2 3 & 4 5 & utput Voltage Module Identification Identification utput utput A (1 slot) B (1 slot) C (2 slots) D (2 slots) E, F (1 slot) G, H (1 slot) K (1 slot) (2 slots) Voltage Voltage 300 W 600 W 900 W 1200 W 250 W Multi 500 W Multi 750 W 1500 W Code ingle ingle ingle ingle Main utput Main utput ingle ingle 0 2 V 60 A 120 A 180 A 240 A 25 A 50 A 150 A 300 A V 60 A 120 A 180 A 240 A 25 A 50 A 150 A 300 A 2 5 V 60 A 120 A 180 A 240 A 25 A 50 A 150 A 300 A 3 12 V 25 A 50 A 75 A 100 A 10.5 A 21 A 62.5 A 125 A 4 15 V 20 A 40 A 60 A 80 A 8.3 A 16.6 A 50 A 100 A 5 24 V 12.5 A 25 A 37.5 A 50 A 5.3 A 10.5 A 3 A 62.4 A 6 28 V 10.7 A 21.4 A 32.1 A 42.8 A 4.5 A 9 A 26.7 A 53.4 A 7 36 V 8.3 A 16.6 A 24.9 A 33.2 A /A /A 20.8 A 41.6 A 9 48 V 6.3 A 12.5 A A 25 A /A /A 15.6 A 3 A ote: Increments of current not shown can be achieved by paralleling modules (add currents of each module selected). Auxiliary utput able: utput(s) 2 and/or 3 of Module Voltage Module Identification Identification utput utput E F G H Voltage Voltage 250 W Dual 250 W riple 500 W Dual 500 W riple Code Aux. utput Aux. utput Aux. utput Aux. utput 0 2 V 10 A 5 A 20 A 10 A V 10 A 5 A 20 A 10 A 2 5 V 10 A 5 A 20 A 10 A 3 12 V 10 A 5 A 20 A 10 A 4 15 V 10 A 5 A 20 A 10 A 5 24 V 5 A 2.5 A 10 A 5 A 6 28 V 5 A 2.5 A 10 A 5 A 3 echnical upport: (888) 41AEC or (407) Americas: (760) Europe (UK) 44 (1384) Asia (HK)
4 AMERICA EURPE AIA EXAMPE Examples of Model umbers IGE UPU 5810 Van Allen Way Carlsbad, CA elephone: Facsimile: otal Power Volts / Amps ize (H x W x ) Model umber 600 W 5 V / 120 A 5 x 5 x 11 V1B W 12 V / 62.5 A 5 x 5 x 11 V1K W 5 V / 180 A 5 x 5 x 11 V1C W 5 V / 240 A 5 x 5 x 11 V1D W 2 V / 600 A 5 x 8 x 11 V W 15 V / 100 A 5 x 5 x 11 V W 5 V / 400 A 5 x 8 x 11 V3D2C220* 2500 W 48 V / 52 A 5 x 8 x 11 V89D920 ** * D2 module derated to 1100 W (2000 W max.) **D9 module derated to 1000 W (2500 W max ) Examples of Model umbers MUIPE UPU Astec House, Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1X, UK elephone: 44 (1384) Facsimile: 44 (1384) ther Voltages Available 2 V 3.3 V 5 V 12 V 15 V 24 V 28 V 36 V pecial 48 V Units , evel 21 ower1, Metroplaza 223, Hing Fong Road Fwai Fong, ew erritories Hong Kong elephone: Facsimile: Voltage ID Code (consult factory) 9 otal utput utput utput utput utput utput ize Model umber Power W 5 / / / 10 5 x 5 x 11 V1H W 5 / / / / / 5 5 / 5 5 x 5 x 11 V1H233F W 5 / / / 10 5 / 10 5 x 5 x 11 V1A2H W 5 / / / / 5 5 x 5 x 11 V1A2H W 5 / / / 10 5 / 10 5 x 5 x 11 V1A2H W 5 / / / / 5 5 x 5 x 11 V1A2H W 5 / / x 5 x 11 V1K2B W 5 / / / / / / 5 5 x 5 x 11 V1H233H W 5 / / / / / / 5 5 x 5 x 11 V1H233H W 5 / / / 20 5 x 5 x 11 V1B2G W 5 / / / 10 5 / 10 5 x 5 x 11 V1B2H W 5 / / / 10 5 x 5 x 11 V1B2H W 5 / / / 10 5 / 10 5 x 5 x 11 V1B2H W 5 / / / / 5 5 x 5 x 11 V1B2H W 5 / / / 20 5 x 8 x 11 V3C2G W 5 / / / 10 5 / 10 5 x 8 x 11 V3C2H W 5 / / x 8 x 11 V3D2B W 5 / / / 21 5 / 20 5 x 8 x 11 V3B2G23G W 5 / / x 8 x 11 V3D2D W 5 / / / 20 5 x 8 x 11 V3D2G W 5 / / / 20 5 / / / 5 5 x 8 x 11 V3C2G33H W 5 / / / 10 5 / 10 5 x 8 x 11 V32H W 5 / / / 20 5 / / / 5 5 x 8 x 11 V3D2G33H W 5 / / / / / 10 5 x 8 x 11 V82B1H33400 V eries Pin Assignments PFC CR CECR Pin o. Function 1 AC K ogic 1 2 AC K ogic 0 3 Global DC K/Conv Run ogic 1 4 Global DC K/Conv Run ogic 0 5 Global DC K/Conv Run/AC K Return 6 Global Inhibit ogic 0*/EA ogic '0' 7 Global Inhibit ogic 1*/EA ogic '1' 8 Global Inhibit Return*EA R 9 Global Isolated Inhibit 10 Global Isolated Inhibit Return * Changes to Enable with ption Code 3 Multiple utput CR CECR Pin o. Function 1 V1 Remote ense 2 V1 Remote Margin / V. Program 3 V1 Remote Margin Hi 4 V1 Remote ense / Margin o 5 V1 DC K / Conv Run ogic 1 6* V1 Isolated Inhibit 7 V1 DC K / Conv Run / I Inh. Return 8 V1 ingle Wire Parallel 9 V2 ingle Wire Parallel 10 V3 ingle Wire Parallel ingle utput CR CECR Pin o. Function 1 Remote ense 2 Remote Margin / V. Program 3 Remote Margin Hi 4 Remote ense / Margin o 5 DC K / Conv Run ogic 1 6 Isolated Inhibit 7 DC K / Conv Run / I Inh. Return 8 ingle Wire Parallel 9 pare Pin 10 pare Pin J2 CR CECR Pin o. Function J21 V2 Remote ense J22 V2 Remote Margin / V. Program J23 V2 Remote Margin Hi J24 V2 Remote ense / Margin o J25 V2 DC K /ogic 1 J26 V3 Remote ense J27 V3 Remote Margin / V. Program J28 V3 Remote Margin Hi J29 V3 Remote ense J210 V3 DC Good /ogic 1 otes: Electrical Characteristics 1. DC K minus 2 to 6% of nominal output voltage (tracking). 2. Inhibit & Enable are both compatible. IAED requires 2 ma source, typical. 3. DC K/Converter Run denotes output voltage is present and converters are running (r'ed signal configuration). 4. PFC ED: Red = Bulk DC bus voltage low; Green = Bulk DC K. 5. utput ED: Red = Indicated output not operating within tolerance; Green = Indicated output operating within tolerance. 6. he 5 x 5 x 11 (V1/6) case is power limited to 1500W max. ee operating curve. 7. he 5 x 8 x 11 case and 5 x 11 x 11 case (V3/4) are power limited to 2000W max. he V8/9 cases are power limited to 2500W max. 8. pecifications subject to change without notice. 9. Warranty: 3 yrs * Inhibits off all the outputs within that module. 4
5 Drawings V1 & V WA 5inch Case ize (5 x 5 x 11 ) Module V1 ± ± ) MAX ( ± 7) 832 UC2B D AIR FW hreaded Insert, 4 Places ike Pattern pposite ide Max penetration: (3.81 ) AC High eutral Ground 2 1 (127.03) Max ide ±.020 ( ±.50) 2.04 ±.05 (51.82 ± 7) 3.49 ±.05 (88.65 ± 7).500 ±.050 (12.70 ± 7) AC Main ±.020 ( ±.50).27 ±.05 (6.86 ± 7).750 ±.050 (19.05 ± 7) Bottom 832 UC2B hreaded Insert, 4 Places Max penetration: (3.81) Module V6 ± ±.020 ( ±.50) AC Phase A AC Phase B AC Phase C AC Ground 2 1 (127.03) Max Back 2.04 ±.05 (51.82 ± 7) 3.49 ±.05 (88.65 ± 7).750 ±.050 (19.05 ± 7) ±.020 ( ±.50).500 ±.050 (12.70 ± 7) E (A MDE) 1. : Barrier type. hree o. 632 B.H. screws (0.375 centers). For V1, V3 & V4 additional GD C added for V6, V8 & V9. Max torque: 10 inlbs (1.1 m). 2. Control connectors: ( and J2) 10 position Molex housing, gold plated contacts. Mates with Molex housing with crimp contacts (Molex C Grid III eries). Connector kit includes mating connector and 10 pins, Astec part # utput terminals (A300 W) (B600 W) & (K750 W) single modules: two (2) 1032 UF HEX HD B. Max. torque: 25 inlbs (2.78 m). 4. utput terminals (E/F250 W) & (G/H500 W) dual/triple modules: Primary: two (2) 1032 UF HEX HD B. Max. torque: 25 inlbs (2.78 m). econdary: barrier strip two (2) 632 UC screws (0.375 centers) per output. Max torque: 10 inlbs (1.1 m). 5. utput terminals (C900 W) (D1200 W) & (1500 W) single modules: four 5/1618 x 5/8" hex head cap screws. Max. torque: 120 inlbs (13.35 m). Captive lock washer provided. 6. Chassis material: aluminum with chemical film coating. 7. Adjustment access: voltage, power fail, and overcurrent from front panel. 8. Bar code: code 39 extended. 9. Mounting for 5inch & 8inch case: four(4) 832 clinch nuts on three (3) surfaces. Mounting for 11inch case: four (4) 832 clinch nuts on two (2) side surfaces & six (6) 832 clinch nuts on bottom surface. Max. penetration inch (3.81). Max. torque: 15 inlbs (1.67 m). 10. Additional support is recommended when unit is mounted in a suspended configuration. Mounting clinch nuts are not designed to support the weight of the unit. 11. Fans: 5inch case, (1) 4.5" dia, 112 CFM (no load), 49 dba. 8inch case, (1) 4.5" dia, 112 CFM (no load), 49 dba; (2) 2.25 dia, 23 CFM (no load), 38 dba. 11inch case, (2) 4.5" dia, 112 CFM (no load), 49dBA 12. All dimensions are in inches (mm). 13. pecifications subject to change without notice. 5 echnical upport: (888) 41AEC or (407) Americas: (760) Europe (UK) 44 (1384) Asia (HK)
6 AMERICA EURPE AIA 8inch Case ize (5 x 8 x 11 ) (18 lbs. / 8.2 kg. maximum) V Van Allen Way Carlsbad, CA elephone: Facsimile: Astec House, Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1X, UK elephone: 44 (1384) Facsimile: 44 (1384) Units , evel 21 ower1, Metroplaza 223, Hing Fong Road Fwai Fong, ew erritories Hong Kong elephone: Facsimile: DRAWIG V3 & V WA V eries Module AC High eutral Ground 7.90 ± 0.05 ( ± 7) (127.03) MAX ± ) MAX ( ± 7) 832 UC2B D AIR FW hreaded Insert, 4 Plac ike Pattern pposite Max penetration: ide ±.020 ( ±.50) 2.04 ±.05 (51.82 ± 7) 3.49 ±.10 (88.65 ± 2.54) 4.94 ±.10 ( ± 2.54) 6.39 ±.10 ( ± 2.54) AC Main ±.020 ( ±.50).27 ±.05 (6.86 ± 7).500 ±.050 (12.70 ± 7).750 ±.050 (19.05 ± 7) Bottom Back V ± 0.05 ( ± 7) ±.020 ( ±.50).750 ±.050 (19.05 ± 7) 832 UC2B hreaded Insert, 4 Places Max penetration: (3.81) AC Phase A AC Phase B AC Phase C AC Ground Module (127.03) MAX ±.050 ( ± 70) ±.020 ( ±.508) 2.04 ±.05 (51.82 ± 7) 3.49 ±.10 (88.65 ± 2.54) 4.94 ±.10 ( ± 2.54) 6.39 ±.10 ( ± 2.54) 6
7 6 1 P/F 6 1 P/F Drawings V4 & V WA 11inch Case ize (5 x 11 x 11 ) 832 UC2B HREADED IER, 6 P V ± ±5.04 (PFC) AC HIGH EURA GRUD ~ ± ±.50 ~ IERA FUE 25 AMP/600V MAX.750 ± ± ± ± ± ± ± ±70 DEAI A 4.94 ± ± ± ± ± ± ± ± ± ± ± ±2.54 V MAX ± ±7 832 UC2B HREADED IER, 4 P IKE PAER PPIE IDE (PFC) ± ±5.04 MAX 4.00 ± ±.50 D AIR FW FR AIR EXHAU PIA REAR AIR EXHAU AC AC Phase HIGHA AC EURA Phase B AC GRUD Phase C.33 ~ IERA FUE 25 AMP/600V ~ MAX ± ± ± ± ± ±7 DEAI A 4.94 ± ± ± ± ± ± ± ± ± ± ± ± echnical upport: (888) 41AEC or (407) Americas: (760) Europe (UK) 44 (1384) Asia (HK)
8 AMERICA 5810 Van Allen Way Carlsbad, CA elephone: Facsimile: EURPE Astec House, Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1X, UK elephone: 44 (1384) Facsimile: 44 (1384) AIA Units , evel 21 ower1, Metroplaza 223, Hing Fong Road Fwai Fong, ew erritories Hong Kong elephone: Facsimile: REF BAK (1 ) REF REF J REF 900W/1200W/1500W IGE UPU (2 ) 250W/500W DUA/RIPE UPU 300W/600W/750W IGE UPU (1 ) (1 ) MDUE CDE C = 900W D = 1200W = 1500W MDUE CDE E = 250W DUA F = 250W RIPE G = 500W DUA H = 500W RIPE MDUE CDE A = 300W B = 600W K = 750W DEAI A Module Front Panels PH PH PH 153
Watts. MVP Series. Special Features. Environmental. Safety MP4 MP6 MP8 MP1
W9959_05_MP_final_134-143_10 2/8/02 4:29 PM Page 136 400-1000 Watts MVP eries pecial Features MP4 MP6 Current share on all outputs with ratings of 10 A or greater Remote sense on all outputs with ratings
More informationMVP Series Watts SPECIAL FEATURES ENVIRONMENTAL SAFETY
VP eries 400-1000 Watts PCIA FAUR Current share on all outputs with ratings of 10 A or greater Remote sense on all outputs with ratings greater than 2 A verload protection on all outputs Voltage adjustment
More informationOpen Frame Power Supplies
, 0 300 Watt Features Small and compact PCB Construction Optional with Chassis and Cover Universal Input 8 264 VAC, Output Voltage adjustable Compliance to E 6000-3-2 (PFC) EMI meets E022, Class B and
More informationPOWER-WIN TECHNOLOGY CORP.
atts Dual to Quad Output FEATURES Build-in active PFC function, PF > 0.9 Compact design for multiple outputs Dual to Quad output, Flexible DC output combination from 3.3V to 48V 2 year warranty ELECTRICAL
More informationPOWER-WIN TECHNOLOGY CORP.
FEATURES Medical 60601-1 3.1 rd Edition approved U-Channel, End fan and Top fan types available Optional high efficiency OR-ing FET diode Current share function 2 year warranty ELECTRICAL SPECIFICATIONS
More informationMODEL SELECTION TABLE Open Frame Models. MODEL SELECTION TABLE U-Chassis Models. MODEL SELECTION TABLE Enclosed Models
Open Frame ( O Type) U-Chassis ( U Type) Enclosed ( C Type) DIN Rail Kit ( DN Type) Size: 5in x 3in x 1.16~1.24in (127mm x 76.2mm x 29.5~31.5mm) Size: 5in x 3~3.23in x 1.5in (127mm x 76.2~82.2mm x 38.1mm)
More informationPRODUCT SPECIFICATION File: EA-250U1C-10 Date: May, 25, 2005
SWITCHING POWER SUPPLY Page: 1 of 5 1. SCOPE 2 2. AC INPUT and AC OUTPUT 2 3. DC OUTPUT CURRENT LOAD RANGES 2 3.1 DYNAMIC DC OUTPUT CHARACTERISTICS 2 3.2 DC OUTPUT ON/OFF CONTROL 2 3.3 OUTPUT RIPPLE and
More informationECP180 Series. Low 1 Profile. High Power Density. 2.0 by 4.0 Footprint. 120W Convection-cooled Rating. 180W Force Cooled Rating
ECP180 Series Low 1 Profile High Power Density 2.0 by 4.0 Footprint 120W Convection-cooled Rating 180W Force Cooled Rating Medical & ITE pprovals Class I and Class II pplications High Efficiency, up to
More informationPRODUCT SPECIFICATION File: EA-520H1U-01 Date: Apr., 7, 2005
SWITCHING POWER SUPPLY Page: 1 of 1 1. SCOPE 2 2. AC INPUT 2 3. DC OUTPUT 2 3.1 VOLTAGE and CURRENT LOAD RANGES 2 3.2 OUTPUT RIPPLE and NOISE 3 3.3 DYNAMIC DC OUTPUT CHARACTERISTICS 3 3.4 DC OUTPUT ON/OFF
More informationSorensen XG 1700 Series 1700 W A Watt, 1U Programmable DC Power Supplies V. Key Features. Key Modes
Sorensen XG 1700 Series 1700 W 1700 Watt, 1U Programmable DC Power Supplies 6 600 V Industry Leading Power Density Up to 1700 Watts in 1U Standard Digital Interfaces USB&RS232/485 LXI Ethernet and Isolated
More informationTC-500PD8. Switching Power Supply ( PS2 A T X 500W 8 0+ ) SPECIFICATION. Revision: 2.0
TC-500PD8 TC-500PD8 Switching Power Supply ( PS2 A T X 500W 8 0+ ) SPECIFICATION Revision: 2.0 727,. Phillips Drive City of Industry. CA 91748. USA http:// www.xeal.com.tw TEL: 626-303-8885 FAX: 626-301-0588
More informationSeries AM1P-Z 1 Watt DC-DC Converter
Click on Series name for product info on aimtec.com FEATURES: Series AM1P-Z Models Single output Model Input Voltage (V) RoHS compliant Operating temperature - o C to + 85 o C 8 Pin DIP Package Input /
More informationPS6R 480W Switching Power Supply
ew Series PS6R 4W Switching Power Supply Reduced size and high efficiency cuts operating costs. Energy-saving 93% Efficiency Space-saving 85mm wide Efficiency (%) 96 94 92 88 86 84 82 Competitor A Competitor
More informationSST-ST75F-ESS The essential silver standard
STRIDER ESSENTIAL SERIES SST-ST75F-ESS The essential silver standard High efficiency with 80 PLUS Silver certification 24/7 continuous power output with 40 operating temperature Class-leading single +12V
More informationSorensen XG Series / XTR Series W A. 850 W, 1U Half Rack Programmable DC Power Supplies V
Sorensen XG Series / XTR Series 670 850 W 850 W, 1U Half Rack Programmable DC Power Supplies 6 600 V Highest Power Density Comprehensive Digital and Analog Interface Options Scalable, Multi-Unit Design
More informationRWS50B RWS100B RWS150B RWS300B RWS600B
RWS-B Series 50W to 600W Single Output General Purpose Power Supplies Features 10 Year e-cap Lifetime 7 Year Warranty Global Safety Approvals Compact Size Better Field Reliability Lower Cost of Ownership
More informationPRODUCT SPECIFICATION File: EA-400H2U-02 Date: Feb., 16, 2005
SWITCHING POWER SUPPLY Page: 1 of 1 1. SCOPE 2 2. AC INPUT 2 3. DC OUTPUT 2 3.1 VOLTAGE and CURRENT LOAD RANGES 2 3.2 CROSS REGULATION 2 3.3 OUTPUT RIPPLE and NOISE 3 3.4 DYNAMIC DC OUTPUT CHARACTERISTICS
More informationPRODUCT SPECIFICATION File: EA- 400ET1-10 Date: Jul., 28, 2006
SWITCHING POWER SUPPLY Page: 1 of 5 1. SCOPE 2 2. AC INPUT 2 3. DC OUTPUT 2 3.1 VOLTAGE and CURRENT LOAD RANGES 2 3.2 CROSS REGULATION 2 3.3 OUTPUT RIPPLE and NOISE 3 3.4 DYNAMIC DC OUTPUT CHARACTERISTICS
More information150 WATT HEW SINGLE SERIES DC/DC CONVERTERS
Features Description The 4:1 Input Voltage 150 W single HEW Series of DC/DC converters provide precisely regulated dc outputs. The output voltage is fully isolated from the input, allowing the output to
More informationPRODUCT SPECIFICATION File: EA-600ETF-C10 Date: Mar. 29, 2010
SWITCHING POWER SUPPLY Full Range Rev.:C1.0 Page: 1 of 5 1. SCOPE 2 2. AC INPUT 2 3. DC OUTPUT 2 3.1 VOLTAGE and CURRENT LOAD RANGES 2 3.2 CROSS REGULATION 2 3.3 OUTPUT RIPPLE and NOISE 3 3.4 DYNAMIC DC
More informationSwitching Power Supplies
Features Boxed Power Supplies with Screw Terminal Block Single- and Triple Output Models EMI Compliance with EN 55022 and FCC Part 15, Level B Short Cirquit Protection Overvoltage Protection High Efficiency
More information15 Watt Low-Profile Wall Plug-In, Single Output, 5-24 VDC Switching Power Supply: N.A., Universal Input, ITE, Class II, Energy Star
GT-81085-YYZZ-X.X-W2 15 Watt Low-Profile Wall Plug-In, Single Output, 5-24 VDC Switching Power Supply: N.A., Universal Input, ITE, Class II, Energy Star ELECTRICAL SPECIFICATIONS: INPUT VOLTAGE: 90 VAC
More information18091-PS. Preliminary General Specification PSM (AC) PES REV: PAGE. 1 of 8
18091-PS Preliminary General Specification PSM204-120(AC) PES REV: PAGE. 1 of 8 MODEL: PSM204-120(AC) PRELIMIARY GENERAL SPECIFICATION 1. AC Input Specification : 1.1 AC input voltage rating: 100-240VAC
More informationOutput Current Input Current Reflected Ripple. VDC VDC ma ma(typ.) ma(typ.) ma(typ.) VDC μf %
FEATURES Industrial Standard Quarter Brick Package Wide Input Range 43-101VDC & 66-1VDC Excellent Efficiency up to 92% I/O Isolation 3000VAC with Reinforced Insulation Operating Ambient Temp. Range - C
More informationSPECIFICATION FSP350-60APN(85) Bronze. (Erp2013) DATE:MAY, 14, 2013 表單編號 :7000P Page1
SPECIFICATION FSP350-60APN(85) Bronze (Erp2013) DATE:MAY, 14, 2013 REV:2 表單編號 :7000P-0105 Page1 TABLE OF CONTENTS PAGE 1. GENERAL REQUIREMENTS 3 2. INPUT REQUIREMENTS 3 3. OUTPUT REQUIREMENTS 3 3.1 Output
More informationLBC S102G 8000 W Ethernet CAN bus on request. LBC S101G W CAN bus Ethernet on request
The shelf consists of a ruggedized Battery Charger, PSU with a 3-phase input for 400 / 480 VAC (line to line) and with an output suitable for 110V battery charging. DC-DC stage to convert the 3-phase input
More informationUnit/Comments. %; Equal Output Loads %; Equal Output Loads Full Load
100 series Single, Dual, Triple Output DC/DC Converter DESCRIPTIONS FEATURES Synchronization 13.3W/In 3 Power Density Efficiency to 87% UL 190 Approved VDE / EN 90 Approved >700,000 Hours MTBF 6 sided
More informationMODEL POWER BATTERY VOLTAGE COMMUNICATION. LBC SxxxG* 8000 W 110 V CAN or Ethernet. LBC SxxxG* W 110 V CAN or Ethernet
The shelf consists of a ruggedized Battery Charger, PSU with a 3-phase input for 400 / 480 VAC (line to line) and with an output suitable for 110V battery charging. DC-DC stage to convert the 3-phase input
More informationSwitching Power Supplies
, 18 150 Watt Features Compact boxed power supplies with screw terminal block Universal input 85-264 VAC, 50/60 Hz Short circuit and overvoltage protection High efficiency International safety approvals
More informationOutput Current Input Current Over Load VDC VDC ma ma(typ.) ma(typ.) VDC μf %
Doc. EC-0093 FEATURES Industrial Standard 2"x1" Package Ultra-wide Input Range 9-36VDC, 18-75VDC, 40-160VDC I/O Isolation 3000VAC with Reinforced Insulation Operating Ambient Temp. Range -40 C to +88 C
More informationGB60S 60W Single Output General Purpose Series
Features 2 x 3 x 1.0 Package Operates to 80 C Ambient For 1U Applications 60W convection cooled Universal Input 90-264Vac Optional Power ON LED Approved to CSA/EN/IEC/UL60950-1, 2 nd Edition Efficiency
More informationKEPCO Will Point You In The Right Direction!
Looking For A High Power, Low Profile Power Supply? KEPCO Will Point You In The Right Direction! -9 AN ISO 900 COMPANY You'll Always Find What You Need At Kepco KLN Series Programmable Power Supply: 0W
More informationPower Supplies. Power Supplies. PS5R Standard Series. PS5R Standard Series Switching Power Supplies
Standard Series Standard Series Switching Part Numbers Part Number Item Watts Rated Voltage Rated Current -A V DC 1.A -A 7. V DC.6A -A24 24V DC.3A -B V DC 2.A Key features of the standard series include:
More informationOutput Current Input Current Reflected Ripple. Efficiency (typ.) (Range) VDC VDC ma ma(typ.) ma(typ.) ma(typ.) VDC μf % MTQZ50-72S05
Doc. EC-0094 FEATURES Industrial Standard Quarter Brick Package Wide Input Range 43-101VDC & 66-1VDC Excellent Efficiency up to 92% I/O Isolation 3000VAC with Reinforced Insulation Operating Ambient Temp.
More informationSeries AM2D-Z 2 Watt DC-DC Converter
s Single output FEATURES: RoHS Compliant Operating temperature -40 o C to +85 o C Low ripple and noise With derating above +75C (see chart) High efficiency up to 82% Pin compatible with multiple manufacturers
More informationIndustrial Power Supplies
, Features Switch Mode Power Supplies for DIN-rail Mounting 6 Power Ranges with 2, 3, 6, 12, 20 and 24 A Current (24 VDC Models) Selectable 115/ 230 VAC Input Very low Ripple and Noise EMI complies with
More informationZWD100PAF. Conformity to RoHS Directive
-SERIES Dual Output W - 225W Features 15 Complies the standard of the harmonics current limiter Worldwide input: 85-265VAC Peak load accommodatable double power: Approximately twice the value of average
More informationDPX30-xxWDxx DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power
DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS FOR INPUT AND
More informationMJWI20 SERIES FEATURES PRODUCT OVERVIEW. DC/DC Converter 20W, Highest Power Density MINMAX MJWI20 Series
DC/DC 2W, Highest Power Density MINMAX MJWI2 Series MJWI2 SERIES DC/DC CONVERTER 2W, Highest Power Density FEATURES Smallest Encapsulated 2W! Package Size 1. x1. x.4 Ultra-wide 4:1 Input Range Very high
More informationDPX30-xxWSxx DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; 3.3 to 28VDC Single Output 30 Watts Output Power
DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; 3.3 to 28VDC Single Output 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS FOR INPUT AND OUTPUT
More informationIsolated and rugged 24 Vdc power for battery powered electronic control systems on rail equipment
TECHNICAL DATASHEET #TDAX083200 Isolated 110Vdc/24Vdc Converter 110V, 96V or 72Vdc Nominal Input Optional Enable Input 24Vdc Output, 240W P/N: AX083200 or AX083201 or AX083202 Isolated and rugged 24 Vdc
More informationPOWER CONVERSION SOLUTIONS FOR INDUSTRY
WER CNVERSIN SLINS FR INDSRY Convel Industrial and Bench op AC/DC ower Supplies ELECRNICS LD WER to supply you! In this catalogue you will find the Convel ranges of industrial and bench top AC/DC power
More informationPRODUCT SPECIFICATION OUTPUT CURRENT (A) OUTPUT CURRENT TOLERANCE ±7% ±7% ±10% ±10% ±7% 1.8. Units % % % Typ. Typ.
0-10V Dimmable FEATURES: AC Input 100~277VAC Built-in Active PFC Function Protection: SCP / OVP / OTP 24V Auxiliary Output 0-10V Dimming Control Dimming 1 ~ 100 Flicker Free High Operating Ambient Temp.:
More informationPower Supplies. SDN-C Compact DIN Rail Series
SDN-C Compact DIN Rail Series The SDN-C DIN rail power supplies are the next generation of the popular SDN series. These models combine high effi ciency and compact size with new visual diagnostic LEDs
More informationDPX15-xxWDxx Dual Output: DC-DC Converter Module 9.5 ~ 36VDC, 18 ~ 75VDC input; ±5 to ±15 VDC Dual Output; 15 Watts Output Power
DPX15-xxWDxx Dual Output: DC-DC Converter Module 9.5 ~ 36VDC, 18 ~ 75VDC input; ±5 to ±15 VDC Dual Output; 15 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW
More informationDPX30-xxSxx DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; 3.3 to 28 VDC Single Output; 30 Watts Output Power
DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; 3.3 to 28 VDC Single Output; 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS
More informationOutput Current Input Current Reflected Ripple. Efficiency (typ.) Load VDC VDC ma ma ma(typ.) ma(typ.) ma (typ.) VDC μf % MKW40-12S033
DC/DC High Efficiency Regulated Output W Minmax MKW Series FEATURES Smallest Encapsulated W Ultra-compact 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage Excellent Efficiency
More informationDPX30-xxDxx DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power
DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS
More informationCUS100ME Series. 2 x 4 100W AC-DC Power Supplies. CUS100ME Series 1. Specification
CUS100ME Series www.emea.tdk-lambda.com/cus100me 2 x 4 100W C-DC Power Supplies Features enefits 100W Convection Rating Quiet Operation 75W With 1m/s irflow at 85 C mbient Suitable for High mbient Temperature
More informationSeries AM5T-Z 5 Watt DC-DC Converter
Click on Series name for product info on aimtec.com s Single Output FEATURES: RoHS compliant Operating temperature -40 o C to + 85 o C 24 Pin DIP Package Input / Output isolation 1500 and 3500VDC High
More informationPower Supplies. PS6R Series Switching Power Supplies. Expandable and space-saving switching power supplies. High efficiency reduces operation costs.
Switching Expandable and space-saving switching power supplies. High efficiency reduces operation costs. 93% efficiency Plug-in output modules for additional output voltages Plug-in branch terminal module
More informationSeries AM2S-Z 2 Watt DC-DC Converter
Click on Series name for product info on aimtec.com Models Single Model Voltage (V) FEATURES: RoHSCompliant Operating Temperature - to +85 4 Pin SIP Package / Isolation and 3VDC Ultra MiniaturePackage
More informationDC-DC CONVERTERS 4:1 WIDE INPUT RANGE UP TO 9 WATTS SINGLE AND DUAL OUTPUT, SIP PACKAGE SWB9 SERIES
DC-DC CONVERTERS 4:1 WIDE INPUT RANGE UP TO 9 WATTS SINGLE AND DUAL OUTPUT, SIP PACKAGE FEATURES 4:1 Ultra Wide Input Range Output Current up to 2000 ma Miniature SIP (Single-In-Line) Package, 0.86 0.36
More informationTDK-Lambda ZWS240BP/A SPECIFICATIONS
SPECIFICATIONS A253-1-1/A-B MODEL ZWS24BP ZWS24BP ZWS24BP ITEMS -24/A -36/A -48/A 1 Nominal Output Voltage V 24 36 48 2 Average Output Current A 1 6.7 5. 3 Peak Output Current (*1) A 2. 13.4 1. 4 Average
More informationOutput Current Input Current Reflected Ripple. Efficiency (typ.) Load VDC VDC ma ma ma(typ.) ma(typ.) ma (typ.) VDC μf % MKW40-12S033
MKW SERIES DC/DC CONVERTER W, Highest Power Density FEATURES Smallest Encapsulated W Ultra-compact 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage Excellent Efficiency up to
More informationElectronic Timer - Series Micon 225 Signal Based Multi - Function
Electronic imer - eries Micon 225 ignal Based Multi - Function Multi-function with ignal tart and upply tart. 16 iming Functions selected by DIP switch. wo independent relay outputs with either both relays
More informationEMERGENCY VEHICLE BATTERY MANAGER PS2024
EMERGENCY VEHICLE BATTERY MANAGER PS2024 2 The PS2024 (Fig. 1) is designed as a on-vehicle battery charger / battery charge state monitor. While the vehicle is at its base or station, the charger is connected
More informationSeries AM2F-Z 2 Watt DC-DC Converter
Click on Series name for product info on aimtec.com Models Single output Model Input FEATURES: RoHS compliant Operating temperature -25 o C to + 85 o C 12 Pin SIP Package Input / Isolation 1, 3 or 5VDC
More informationPower Conversion Systems 2005/2006. Schaefer the Power to make it happen.
Power Conversion Systems 2005/2006 Schaefer the Power to make it happen. Company profile workforce experience customer orientation flexibility reliability Schaefer Elektronik, founded in 1969, has grown
More informationFeatures. LED Driver. RACT09 9 Watt. TRIAC Dimmable. Single Output RACT09- AC/DC Converter
Features TRIAC Dimmable LED Driver Triac dimmable with leading or trailing edge dimmers Class II with SELV output (no earth required) Extra-large screw terminals and integrated cable clamps for easy installation
More informationVDC VDC ma ma ma(typ.) ma(typ.) ma (typ.) VDC μf % MKW40-12S
MKW SERIES DC/DC CONVERTER W, Highest Power Density FEATURES Smallest Encapsulated W Ultra-compact 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage Excellent Efficiency up to
More informationOUTPUT VOLTAGE 5V MAX.INPUT CURRENT 16.0A 12V 7.0A 12V 12V 24V 35.0A 28V 48V 12V 15V 24V 28V 23.0A 48V 12V 15V 24V 28V 48V 11.5A
210W to Single Output Full Brick DC/DC Converters STANDARD FULL BRICK PACKAGE POWER DENSITY UP TO 5.53W/CM 3 EFFICIENCIES FROM 86-91% ACTIVE LOAD SHARING WIDE INPUT VOLTAGE RANGE ACTIVE LOAD SHARING REMOTE
More information<Designed to meet harmonic current regulations> Board type, ultra-small size, and low cost
SERIES Board type, ultra-small size, and low cost Ordering Information Switching power supplies General Description 2. Allowable Input Voltage Range AC85
More information(typ.) (Range) Input Specifications Parameter Model Min. Typ. Max. Unit 12V Input Models Input Surge Voltage (100ms.
FEATURES Smallest Encapsulated 50W! Package Size 2.0 x 1.0 x 0.4 Wide 2:1 lnput Range Excellent Efficiency up to 92% Over-Temperature Protection I/O-isolation Voltage 1500VDC Remote On/Off Control Shielded
More informationSeries AM2D-Z 2 Watt DC-DC Converter
Click on Series name for product info on aimtec.com s Single output Input FEATURES: RoHS Compliant Low Ripple and Noise High up to 82% 7 Pin SIP Package Current (ma) Operating Temperature -40 o C to +85
More informationEFFEKTA Power Supplies
EFFEKTA GENERAL INFORMATION UPS topology ON LINE - Double Conversion Classification VFI-SS-111 in accordance with IEC 62040-3 Nominal output power (Cos Ø 0,9) - kva 10 15 20 30 40 Nominal output power
More informationPRODUCTS: POWER SUPPLY
PRODUCTS: POWER SUPPLY Impact Lighting Inc. All rights reserved. Impact Lighting Inc. Reserves the right to change specifications without notice. 138 POWER SUPPLY 15W AC-DC [12V/1.25A] UNIVERSAL POWER
More information55GS1 DC/DC Converter
DC/DC Converter 25-Watt Ruggedized Converter Conduction-Cooled, Single Output Proudly made in the USA Description NAI s is a COTS, that accepts a +28 VDC input and provides a single full-power output at
More informationUCS-CHR24V55W. Combined Power Supply & Battery Charger. Data Sheet
Combined Power Supply & Battery Charger Data Sheet INTRODUCTION UCS-CHR24V55W is a combined charger and power supply with dedicated outputs for both charging and power supply. With a large input range
More informationLANC245.1W12. DC/DC Converter VDC Input 5.1 VDC Output at 2.4A. Features:
DC/DC Converter 18-36 VDC Input 5.1 VDC Output at 2.4A Features: Applications: Distributed Power Architectures Communications Equipment Computer Equipment Work Stations UL TUV CB CE MARK RoHS Compliant
More informationSMT-BM 20 A BMM 05 F BMM 05 AF
gb SMT-BM 20 A BMM 05 F BMM 05 AF SINGLE-AXIS RACKS 1 2 SINGLE-AXIS RACKS This is a general manual describing a series of racks receiving servo amplifiers having output capability suitable for driving
More informationCUS200M Series. Single Output 200 to 250W Medical & ITE Power Supplies. CUS200M Series 1. Specification
CUS200M Series www.emea.tdk-lambda.com/cus200m Single Output 200 to 250W Medical & ITE Power Supplies Features Benefits IEC 1-1 (2x MOPP) & IEC 950-1 Approvals Suitable for B & BF type Medical and ITE
More informationEfficiency (typ.) (Range) Output Voltage Current. Input Current Load VDC VDC ma ma ma(typ.) ma(typ.) ma(typ.
FEATURES 2"x 1"x 0.4" Metal Package Wide 2:1 Input Range High Efficiency up to % Operating Ambient Temp. Range 40 C to 80 C Short Circuit Protection I/O-isolation 1500 VDC Input Filter meets EN 55022,class
More information(typ.) (Range) Load
FEATURES Highest Power Density 1" x 1" x 0.4" Shielded Metal Package Wide 2:1 Input Range Excellent Efficiency up to % Operating Temp. Range - C to + C Optional Heatsink I/O-isolation Voltage 10VDC Remote
More informationNOT RECOMMENDED FOR NEW DESIGNS
olt Input NOT RECOMMENDED FOR NEW DESIGNS Series Features 40 C to + C operation 19 to DC input 50 V for 50 ms transient protection Fully isolated Fixed frequency Remote sense on single models Inhibit/sync
More informationLS200 Series Instruction Manual
LS200 Series Instruction Manual BEFORE USING THE POWER SUPPLY UNIT Pay attention to all warnings and cautions before using the unit. Incorrect usage may lead to an electrical shock, damage to the unit
More informationSeries AM2D-RZ 2 Watt DC-DC Converter
Click on Series name for product info on aimtec.com FEATURES: Models Single output Model Input RoHS Compliant Operating Temperature - o C to +85 o C High Efficiency up to 89% Pin Compatible with Multiple
More informationHALF-BRICK DC-DC CONVERTERS 4:1 ULTRA WIDE INPUT RANGE 100 WATT RAILWAY APPLICATIONS HWB100 SERIES
HALF-BRICK DC-DC CONVERTERS 4:1 ULTRA WIDE INPUT RANGE WATT RAILWAY APPLICATIONS FEATURES No Minimum Load Required 225 Input to Output Basic Insulation Railway Applications 4:1 Wide Input Voltage Range
More informationMax. Output Power. Efficiency (1) 110Vac 220Vac. 450 ma 90 ~ 305 Vac 445 Vdc 200 W 92% EUC-200S045ST
LED Driver EUC200SxxxST 20110114 D Features Ultra High Efficiency (Up to ) Active Power Factor Correction (0.99 Typical) Constant Current Output Lightning Protection AllRound Protection: SCP, OTP, OVP
More informationDocument: PRODSPEC-140 Revision: G DCN No Date: October 1, 2014 Product: 10-amp EnerGenius NRG Battery Charger
Document: PRODSPEC-140 Revision: G DCN No. 106512 Date: October 1, 2014 Product: 10-amp EnerGenius NRG Battery Charger 1. GENERAL DESCRIPTION 1.1 General Description Fully regulated, constant voltage,
More informationDC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS MTWA2 SERIES
DC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS FEATURES 2:1 Wide Input Voltage Range: 4.5-12 Input, 9-18 and 18-36 and 36-75 5000Vac Input to Output 2MOPP Isolation Remote On/Off
More informationIS 15885(Part 2/Sec13) R ( for 24V only)
THOMAS SAMUEL THOMAS SAMUEL Bauar t gepruft Sicherheit egel ma ge od o s be wac g W Constant Voltage + Constant Current LED Driver 110 M IP67 Features Constant Voltage + Constant Current mode output Plastic
More information(typ.) (Range) ±18 330# 89 MPW MPW
DC/DC 30W, Single & Dual Output FEATURES 2 x 1.6 x 0.4 Metal Package Ultra-wide 4:1 Input Range Operating Temp. Range 40 C to 80 C Short Circuit Protection I/O-isolation 1500 VDC Input Filter meets EN
More informationNOT RECOMMENDED FOR NEW DESIGNS
DC/DC Converters olt Input NOT RECOMMENDED FOR NEW DESIGNS Series Features 40 to +85 C operation 18 to DC input (19 to DC input HR301-25) 50 V for 50 ms transient protection Fully isolated Fixed frequency
More informationSL Series Application Notes. SL Series - Application Notes. General Application Notes. Wire Gage & Distance to Load
Transportation Products SL Series - Application Notes General Application Notes vin 2 ft. 14 AWG The SL family of power converters, designed as military grade standalone power converters, can also be used
More information4:1 Input Voltage Range 2.25kVDC Isolation UL Certified Efficiency up to 87% Ultraminiature Open Frame SMD No Minimum Load Required
Features Regulated Converters Description 4:1 Input Voltage Range 2.25kV Isolation UL Certified Efficiency up to 87% Ultraminiature Open Frame SMD No Minimum Load Required The series are SMD open frame
More informationTHIS PAGE WAS INTENTIONALLY LEFT BLANK.
THIS PAGE WAS INTENTIONALLY LEFT BLANK. Table of Contents Features... 2 Applications... 2 Approvals... 2 Part Marking... 3 System... 4 Absolute Ratings... 4 Fuse Configuration and Dimensions... 5 Specifications...
More informationEmergency lighting units EM converterled
EM converter EM converter BASIC icd 50 V BASIC series Product description lighting Driver for manual testing For self-contained emergency lighting For modules with a forward voltage of 10 54 V SEV for
More informationEmergency lighting units EM converterled. EM converterled BASIC 50 V BASIC series
BASIC 50 V BASIC series Product description lighting Driver for manual testing For self-contained emergency lighting For modules with a forward voltage of 10 52 V SEV for output voltage < 60 V DC ow profile
More information(DC/DC) SERIES to 96.5% (typical) Product Lineup. Ordering Information. Features. General Description. Super high efficiency
SERIES (DC/DC) "TESLA Converter" (next-generation power supply) adopted : ultra small size and super high efficiency.chassis module/open-frame type Super high efficiency 94.5 to 96.5% (typical) Ordering
More informationPanel Model Adjust Adjust Power 5Hz-1MHz 20MHz BW 5Hz-1MHz % Output Jacks Range Range (W) (mv) (mv) (ma) ( VAC) (Option)
Z+ Series Features 2U high uilt-in US, RS232 & RS485 Optional LN, GPI & isolated analogue programming interfaces Outputs up to 650Vdc rbitrary function generation 5 year warranty Minimises system rack
More informationN2POWER XLM240 AC-DC SERIES HIGH-EFFICIENCY ITE & MEDICAL SWITCHING POWER SUPPLY
N2POWE XLM240 AC-DC SEIES HIGH-EFFICIENCY ITE & MEDICAL SWITCHING POWE SUPPLY HIGHLIGHTS ITE & Medical switching power supply High efficiency up to 94% P.F.C. function > 0.9 < 0.5W no load input power
More informationCHASSIS MOUNT DC-DC CONVERTERS 4:1 WIDE INPUT RANGE, 150 WATTS RAILWAY APPLICATIONS FWB(D)150 SERIES*
CHASSIS MOUNT DC-DC CONVERTERS 4:1 WIDE INPUT RANGE, 150 WATTS RAILWAY APPLICATIONS * FEATURES 4:1 Wide Input Range (9-36, 43-160Vdc) No Minimum Load Required High Efficiency: Up to 89% Built In EN55011
More information350W Slim Type with PFC Switching Power Supply
Bauart gepruft Sicherheit egelma ge od o s be wac g www. tuv.com ID 2000000000 350W Slim Type with PFC Switching Power Supply S&E GB4943 UL950-1 EN950-1 EN335-1 IEC950-1 % - ~+ Industrial automation machinery
More information2W, Low Cost DIP, Dual Output DC/DC Converters
2W, Low Cost DIP, Dual Output DC/DC s Key Features Low Cost 500 Isolation MTBF > 0,000 Hours mv P-P Ripple and Noise Input 12 Output {15 Temperature Performance -25] to +71] Short Circuit Protection UL
More informationTDK-Lambda ZWS300BAF/A
ZWS3BAF/A SPECIFICATIONS A254-1-1/A-B MODEL ZWS3BAF ZWS3BAF ZWS3BAF ZWS3BAF ZWS3BAF ITEMS -12/A -15/A -24/A -36/A -48/A 1 Nominal Output Voltage V 12 15 24 36 48 2 Maximum Output Current A 25.. 12.5 8.4
More information55 Watt K Triple Series DC/DC Converters
Features Very Low Noise, < mv P-P Maximum PCB Mounting with Optional Heat Sink or Chassis Mount Versions Efficiencies to 87 Common and Differential Mode Input Filtering Remote Sense On + Volt Output Single
More informationZMS100 Series. 80W Convection, 100W Forced-Air Cooled Single Output Power Supplies. ZMS100 Series 1. Specification
ZMS100 Series www.emea.tdk-lambda.com/zms 80W Convection, 100W Forced-Air Cooled Single Output Power Supplies Features Benefits Long e-cap lifetime Better field reliability and service life Compact 2 x
More informationPART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE FED60-48 S 05 W - M3 N HC Series Name Input Output Output Input Operating Temp. Remote
More informationOrdering Information. Switching Power Supply S82F. Industrial-Grade Power Supply for General or Peak Load Applications SWITCHING POWER SUPPLIES
Switching Power Supply S82F Industrial-Grade Power Supply for General or Peak Load Applications Correct input voltage range is automatically selected: 1 VAC or 2 VAC. Model S82F-P is suitable for peak
More information