N2POWER XLM240 AC-DC SERIES HIGH-EFFICIENCY ITE & MEDICAL SWITCHING POWER SUPPLY

Transcription

1 N2POWE XLM240 AC-DC SEIES HIGH-EFFICIENCY ITE & MEDICAL SWITCHING POWE SUPPLY HIGHLIGHTS ITE & Medical switching power supply High efficiency up to 94% P.F.C. function > 0.9 < 0.5W no load input power Built-in 12V / 0.5A fan supply EMI for both Class I (with FG) and Class II (without FG) configurations Open Frame, U-Frame and Enclosed models available Maximum power: 240W with 10CFM fan or up to 160W with unobstructed convection cooling 4000VAC input to output 2XMOPPP Insulation (Suitable for BF application with appropriate system consideration) 3-year warranty POWE SUPPLY LEADE N2Power continues to lead the power density race with its new small, high efficiency XLM240 Series AC-DC power supplies. Our state of the art technology yields a very small 4 x 2 footprint, reduces wasted power, and offers among the highest power densities in the market in the 240 watt range, exceeding 25 watts per cubic inch. This design means reduced energy costs, a greater return on your investment, higher reliability and longer product life. HIGH EFFICIENCY IN A SMALL PACKAGE The XLM240 Series provides up to 94% efficiency in an AC-DC power supply. This unique design reduces energy consumption and generates less wasted heat. It requires little forced air cooling and decreases AC loads, resulting in greater economy of operation. XLMO240 (Open-Frame) XLMU240 (U-Frame) XLME240 (Enclosed) QUALSTA COPOATION ev:

2 N2POWE XLM240 AC-DC SEIES HIGH-EFFICIENCY ITE & MEDICAL SWITCHING POWE SUPPLY MODEL PAT NUMBE OUTPUT VOLTAGE XLMO VOUT 12 XLMU VOUT 12 XLME VOUT 12 XLMO VOUT 15 XLMU VOUT 15 XLME VOUT 15 XLMO VOUT 24 XLMU VOUT 24 XLME VOUT 24 XLMO VOUT 48 XLMU VOUT 48 XLME VOUT 48 All specifications valid at normal input voltage, full load and otherwise stated. XLMO models are Open Frame, XLMU models are U-Frame and XLME models are Enclosed Compliance * Safety: UL / IEC / EN Edition & UL / IEC / EN AM2 EMC: Conducted EMI (6) adiated Immunity Fast Transient Surge Conducted Immunity PFMF Dips Interruption EN55011 : A1 Class B Group1 EN V/m EN ± 2kV EN ±1kV EN Vrms EN A/m EN % 10ms EN >95% 5000ms Notes (1) With 10CFM fan (2) Convection cooling (3) ipple & Noise are measured at 20MHz of bandwidth with 0.1uF & 47uF parallel capacitor. (4) Hold-up Time measured at 90% Vout. (5) Please check the derating curve for more details. (6) Please secure the power supply unit to your metal case by using the four screw holes in the corners for either Class I or Class II equipment (7) The fan supply is designed to serve as the source of the additive external fan for the cooling of the power supply, enabling the full load delivery and assuring the best life span of the product. Please do not use this fan supply to drive other devices. This product is not designed for use in critical life support systems, equipment used in hazardous environment, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other than the ones listed in this datasheet. * Every effort has been made to keep the information contained in this document current and accurate as of the date of publication or revision. However, no guarantee is given or implied that the document is error-free or that it is accurate with regard to any specification. N2Power reserves the right to change specifications without notice. Qualstar and the Qualstar logo are registered trademarks of Qualstar Corporation. N2Power and the N2Power logo are trademarks of Qualstar Corporation. All other trademarks are the property of their respective owners. QUALSTA COPOATION EGULATION (%) +25 C after warm-up time, unless MAXIMUM CUENT (A) 20 (1) 13.3 (2) 16 (1) (2) 10 (1) 6.66 (2) 5 (1) 3.33 (2) IPPLE & NOISE (P-P) 120 mv (3) 150 mv (3) 240 mv (3) 480 mv (3) INPUT SPECIFICATIONS Nominal Input Voltage (5) VAC Input Frequency ange Hz < 3.0 A 115 VAC Input Current < 1.5 A 230 VAC 4000 VAC input to output Safety Isolation 2000 VAC input to ground 1500 VAC output to gnd. < 45 A 115 VAC Inrush Current < 90 A 230 VAC < 0.1mA / 264 VAC Leakage Current (Touch Current) Power 230VAC > 0.9 at full load OUTPUT SPECIFICATIONS Total Output 240 W (1) 160 W (2) Output Voltages 12 to 48 V Voltage Tolerancee ±2% Line egulation Load egulation Hold-up Time (4) Efficiency Minimum Load POTECTION Fan Supply (Open frame and U-frame models) (7) Model XLM# XLM# XLM# XLM# Minimum (VDC) ±1% ( VAC) ±1% (0-100%, typical) Min. 10 Up to 94% 0% Over Voltage Protection: Auto recovery Auto recovery, hiccup Over Power Protection: mode Over Temperature: Auto recovery Auto recovery, hiccup Short Circuit Protection: mode ENVIONMENTAL SPECIFICATIONS 30 to +70 C Operating Temperature: (with derating) Storage Temperature: 30 to +85 C elative Humidity: 20% to 90% (non-cond.) > 250, C MTBF (full load att 25 C): (MIL-HDBK-217F, Notice 1) 10~500Hz, 2G Vibration 10min./1cycle, 60min. each along X, Y, Z axes. Nominal (VDC) Maximum (VDC) ev:

3 N2POWE XLM240 AC-DC SEIES HIGH-EFFICIENCY ITE & MEDICAL SWITCHING POWE SUPPLY OPEATING CHAACTEISTICS BLOCK DIAGAM QUALSTA COPOATION ev:

4 N2POWE XLM240 AC-DC SEIES HIGH-EFFICIENCY ITE & MEDICAL SWITCHING POWE SUPPLY MECHANICAL DAWINGS Open Frame Models Standard Type A QUALSTA COPOATION ev:

5 N2POWE XLM240 AC-DC SEIES HIGH-EFFICIENCY ITE & MEDICAL SWITCHING POWE SUPPLY MECHANICAL DAWINGS U-Frame Models Standard 46.5 [1.830] Type A 46.5 [1.830] QUALSTA COPOATION ev:

6 N2POWE XLM240 AC-DC SEIES HIGH-EFFICIENCY ITE & MEDICAL SWITCHING POWE SUPPLY MECHANICAL DAWINGS Enclosed Models Standard Type A QUALSTA COPOATION ev: