CERTIFICATE. Solar Keymark Certificate No. SP SC
|
|
- Aron Austin
- 5 years ago
- Views:
Transcription
1 CERTIFICATE Solar Keymark Certificate No. SP SC Holder/Issued to/manufacturer : Jiangsu Micoe Solar Energy Co. Ltd Address: NingHai Industrial Zone, Lianyungang City, Jiangsu Province, China Product name and description Solar thermal systems for water heating. For technical information see Appendix (2 pages). Models: Certificate The product is found to comply with the requirements in EN 2976-:2006 Factory made systems, Part : General requirements and the Specific CEN Keymark Scheme Rules for Solar Thermal Products, and are based on test results according to EN :2006 Part 2: s. Marking Products conforming to this certificate shall be marked in accordance with the requirements in the Specific CEN Keymark Scheme Rules for Solar Thermal Products. The marking shall, together with the Keymark logo, show the identification code of the empowered certification body (SP Technical Research Institute of Sweden, No. 02), also see CEN-CENELEC Internal Regulations Part 4 Certification, Annex A. Validity This certificate is valid until provided that the conditions in the Solar Keymark Rules are fulfilled and the standard or rules are not modified significantly. The validity of the certificate can be checked in the database, see Solar Keymark website Miscellaneous The manufacturer's factory production control procedures are under surveillance by the responsibility of SP. This certificate was first issued This is issue number 2. Borås, Sweden SP Technical Research Institute of Sweden Certification Lennart Aronsson Certification Manager Magnus Sturesson Certification Officer SP Technical Research Institute of Sweden Box 857, SE-50 5 Borås, Sweden Phone: /internet: info@sp.se/ 02 Empowered Certification Body No. 02: SP Certification, Sweden For more information of Solar Keymark visit: This certificate may not be reproduced other than in full, except with the prior written approval by SP. SP Certification rules SPCR402 applies.
2 Page of 5 Summary of EN SOLAR SYSTEM test results Annex to Solar KEYMARK Certificate Brand (optional) Jiangsu Micoe Solar Energy Co., Ltd. Micoe Street NingHai Industrial Zone Postal Code Lianyungang city, Jiangsu Province System classification Application(s) Hot water Solar loop, circulation principle Thermosyphon Direct solar loop / heat exchanger Heat exchanger Open, vented or closed solar loop Vented Drain back/down Always filled (no drain) Store location Outdoor Store orientation (of main axis) Horizontal Type of auxiliary heating (internal back-up heat) Electric If other auxiliary/internal back-up heating, please specifiy: None Solar+supplementary OR Solar-only / Solar pre-heat Solar only / Solar preheat Collector(s) Jiangsu Micoe Solar Energy Co., Keymark lic.no. if available None Per module Area (AG) length m² mm width mm, , , , Keymark lic.no. if available Store name 50L 200L 240L 300L Licence Number Issued Total nominal volume Heat store(s) Jiangsu Micoe Solar Energy Co., Ltd. None height width depth SP SC Country China info@micoe.com Tel. / Fax /9565 Auxiliary heated volume Electrical aux. heating power litres mm mm mm litres kw optional optional,5, optional, optional,5 Solar loop controller Solar loop fluid Keymark lic.no. if available None Recommended/required No recommend./requirements None NA Name None Name NA Solar loop pump - power range 0 W to 0 W Freezing point -20 C Number of collectors in each configuration for each store Store name GZU-00/002/003/004/005 Date of test report The "negative pressure test of the collector" according to EN2975-2:2006, was SP Technical Research Institute of Sweden Box 857, 50 5 Borås, Sweden info@sp.se tel Version 3.6,
3 Page 2 of 5 Summary of EN test results Certification No. SP SC Annex to Solar KEYMARK Certificate Issued Jiangsu Micoe Solar Energy Co., Ltd. Country China Brand (optional) Micoe Street NingHai Industrial Zone info@micoe.com Postal Code Lianyungang city, Jiangsu Province Tel. / Fax / L 200L 240L 300L No. Collectors Storage name 50L Daily drawoff 0 l Daily drawoff 40 l Daily drawoff 70 l Stockholm SE , , ,2 WürzburgDE , Davos CH , , ,6 Athens GR , , , 0 60, , MJ/y Not relevant for solar domestic hot water system G Ref. conditions Ta,ave 7,5 9,0 3,2 8,5 Tc,ave 8,5 0,0 5,4 7,8 Max. operating press. - collector side 0 kpa Max. operating press. - tank side 400 Date of test report GZU-00/002/003/004/ The "negative pressure test of the collector" according to EN2975-2:2006, was kpa All values are subject to some uncertainty; e.g. the uncertainty on system output is typically in the range of ± 5 % to ± 5 % Version 3.6, SP Technical Research Institute of Sweden Box 857, 50 5 Borås, Sweden info@sp.se tel
4 Page 3 of 5 Summary of EN test results Certification No. SP SC Annex to Solar KEYMARK Certificate Issued Jiangsu Micoe Solar Energy Co., Ltd. Country China Brand (optional) Micoe Street NingHai Industrial Zone info@micoe.com Postal Code Lianyungang city, Jiangsu Province Tel. / Fax /9565 No. Collectors Storage name 200L Daily drawoff 70 l Daily drawoff 200 l Daily drawoff 250 l Stockholm SE , , ,2 WürzburgDE , Davos CH ,2 Athens GR , , , , ,9 0 65, ,3 MJ/y Not relevant for solar domestic hot water system G Ref. conditions Ta,ave 7,5 9,0 3,2 8,5 Tc,ave 8,5 0,0 5,4 7,8 Max. operating press. - collector side 0 kpa Max. operating press. - tank side 400 kpa GZU-00/002/003/004/005 Date of test report The "negative pressure test of the collector" according to EN2975-2:2006, was All values are subject to some uncertainty; e.g. the uncertainty on system output is typically in the range of ± 5 % to ± 5 % Version 3.6, SP Technical Research Institute of Sweden Box 857, 50 5 Borås, Sweden info@sp.se tel
5 Page 4 of 5 Summary of EN test results Certification No. SP SC Annex to Solar KEYMARK Certificate Issued Jiangsu Micoe Solar Energy Co., Ltd. Country China Brand (optional) Micoe Street NingHai Industrial Zone info@micoe.com Postal Code Lianyungang city, Jiangsu Province Tel. / Fax /9565 No. Collectors Storage name 240L Daily drawoff 200 l Daily drawoff 250 l Daily drawoff 300 l Stockholm SE , , ,2 WürzburgDE , , ,3 Davos CH , , ,5 0 63, ,7 Athens GR , MJ/y Not relevant for solar domestic hot water system G Ref. conditions Ta,ave 7,5 9,0 3,2 8,5 Tc,ave 8,5 0,0 5,4 7,8 Max. operating press. - collector side 0 kpa Max. operating press. - tank side 400 kpa GZU-00/002/003/004/005 Date of test report The "negative pressure test of the collector" according to EN2975-2:2006, was All values are subject to some uncertainty; e.g. the uncertainty on system output is typically in the range of ± 5 % to ± 5 % Version 3.6, SP Technical Research Institute of Sweden Box 857, 50 5 Borås, Sweden info@sp.se tel
6 Page 5 of 5 Summary of EN test results Certification No. SP SC Annex to Solar KEYMARK Certificate Issued Jiangsu Micoe Solar Energy Co., Ltd. Country China Brand (optional) Micoe Street NingHai Industrial Zone info@micoe.com Postal Code Lianyungang city, Jiangsu Province Tel. / Fax /9565 No. Collectors Storage name 300L Daily drawoff 250 l Daily drawoff 300 l Daily drawoff 400 l Stockholm SE , , ,2 WürzburgDE , Davos CH ,5 Athens GR , , , , ,5 0 65, ,5 MJ/y Not relevant for solar domestic hot water system G Ref. conditions Ta,ave 7,5 9,0 3,2 8,5 Tc,ave 8,5 0,0 5,4 7,8 Max. operating press. - collector side 0 kpa Max. operating press. - tank side 400 kpa GZU-00/002/003/004/005 Date of test report The "negative pressure test of the collector" according to EN2975-2:2006, was All values are subject to some uncertainty; e.g. the uncertainty on system output is typically in the range of ± 5 % to ± 5 % Version 3.6, SP Technical Research Institute of Sweden Box 857, 50 5 Borås, Sweden info@sp.se tel
Annex to Solar KEYMARK Certificate
Page 1 of 7 Summary of EN12976-2 SOLAR SYSTEM test results Annex to Solar KEYMARK Certificate Brand (optional) SAMMLER B. Michalopoulos sa Street 18 Chiou str. Aspropyrgos Ind. Zone Postal Code GR-19300
More informationAriston Thermo S.p.A Keymark lic.no. if available - Company. Store name. length. width. Gross CNA150HF CNA200HF CNA300HF. Company. Name.
Page 1 of 8 Summary of EN12976-2 SOLAR SYSTEM test results Annex to Solar KEYMARK Certificate Brand (optional) Ariston Thermo S.p.A. ARISTON KAIROS Street Via A. Merloni 45 Postal Code 60044 Fabriano Licence
More informationDIN CERTCO Alboinstraße Berlin Tel: Fax:
1 of Page Suary of EN12976-2 SOLAR SYSTEM test results Annex to Solar KEYMARK Certificate Licence Number Issued Brand (optional) Street Postal Code Country E-mail Tel. / Fax 17, Rue de la petite Baratte
More informationDIN CERTCO Alboinstraße Berlin Tel: Fax:
Area (AG) length width Total nominal volume height width depth Auxiliary heated volume Electrical aux. heating power Page 1 of 7 Summary of EN129762 SOLAR SYSTEM test results Annex to Solar KEYMARK Certificate
More informationAnnex to Solar KEYMARK Certificate
Page 1 of 7 Summary of EN12976-2 SOLAR SYSTEM test results Annex to Solar KEYMARK Certificate Brand (optional) Cirelius, Lda. Street Rua Inocencio Osorio L. Gondim, 103; ZI Avintes Postal Code PT-4430-662
More informationDIN CERTCO Alboinstraße Berlin Tel: Fax:
Area (AG) length width Total nominal volume height width depth Auxiliary heated volume Electrical aux. heating power Page 1 of 8 Summary of EN129762 SOLAR SYSTEM test results Annex to Solar KEYMARK Certificate
More informationSummary of EN Test Results, Licence Number 011-7S471 R annex to Solar KEYMARK Certificate Issued
Summary of EN 12975 Test Results, Licence Number 011-7S471 R annex to Solar KEYMARK Certificate Issued 2014-08-28 Company holding the Brand (optional) Ako Tec Produktionsgesellschaft mbh Ako Tec Country
More informationSummary of EN Test Results, Licence Number 011-7S660 R annex to Solar KEYMARK Certificate Issued
Summary of EN 12975 Test Results, Licence Number 011-7S660 R annex to Solar KEYMARK Certificate Issued 2014-08-28 Company holding the Brand (optional) Ako Tec Produktionsgesellschaft mbh Ako Tec Country
More informationCertificate of constancy of performance
0402-CPR-SC0221-16 In compliance with Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 (the Construction s Regulation or CPR), this certificate applies to the construction
More informationContact person Date Reference Page Hans Eriksson F000838G 1 (4) Wood Technology
issued by an Accredited Testing Laboratory Contact person Hans Eriksson 2015-03-26 5F000838G 1 (4) Wood Technology +46 10 516 54 28 hans.eriksson@sp.se 1002 ISO/IEC 17025 Nordic Comfort Products A/S P.O.
More informationContact person Date Reference Page Hans Eriksson F000838D 1 (3) Wood Technology
issued by an Accredited Testing Laboratory Contact person Hans Eriksson 2015-03-26 5F000838D 1 (3) Wood Technology +46 516 54 28 hans.eriksson@sp.se 02 ISO/IEC 17025 Nordic Comfort Products A/S P.O. Box
More informationContact person Date Reference Page Michael Lindblad F000833F 1 (1) Sustainable Built Environment
issued by an Accredited Testing Laboratory Contact person Michael Lindblad 2015-06-25 5F000833F 1 (1) Sustainable Built Environment +46 10 516 58 58 Michael.Lindblad@sp.se 1002 ISO/IEC 17025 Martela AB
More informationEvaluation Certificate
SC0414-14 Certificate for a part of a measuring system for LOTW Forecourt controller, FuelNet Manager Issued to CODAB AB Höjdrodergatan 24, SE-212 39 Malmö, Sweden In respect of (part of instrument) Forecourt
More informationContact person Date Reference Page Ulf Lemke F015337C 1 (4) Wood Technology
issued by an Accredited Testing Laboratory Contact person Ulf Lemke 2013-08-12 3F015337C 1 (4) Wood Technology +46 10 516 50 32 ulf.lemke@sp.se 1002 ISO/IEC 17025 Johanson Design AB Anders Anderssons väg
More informationContact person Date Reference Page Michael Lindblad F013838C 1 (1) Sustainable Built Environment
issued by an Accredited Testing Laboratory Contact person Michael Lindblad 2015-09-17 5F013838C 1 (1) Sustainable Built Environment +46 10 516 58 58 Michael.Lindblad@sp.se 1002 ISO/IEC 17025 Johanson Design
More informationContact person Date Reference Page Ulf Lemke F027196A 1 (4) Wood Technology
issued by an Accredited Testing Laboratory Contact person Ulf Lemke 2014-01-22 3F027196A 1 (4) Wood Technology +46 10 516 50 32 ulf.lemke@sp.se 1002 ISO/IEC 17025 Nordic Comfort Products A/S P.O. Box 3
More informationParts Certificate Certificate for a part of a measuring system for LOTW
No. 107030 Wayne ixpay TX secure payment platform, a payment terminal (OPT) for cards Issued to Wayne Fueling Systems Sweden AB Hanögatan 10, SE-211 24 Malmö, Sweden In respect of (part of instrument)
More informationSKN_N0106AnnexJ_R2. Annex J - Specific requirements for PVT collector Certification. 1. Introduction and definition
Annex J - Specific requirements for PVT collector Certification 1. Introduction and definition PVT collectors (named hybrid collectors in ISO 9806) generate heat and electric power at the same time. They
More informationSUNRAIN SOLAR HEAT PIPE COLLECTOR TZ58/1800- R SERIES
SUNRAIN SOLAR HEAT PIPE COLLECTOR TZ58/1800- R SERIES Welcome to the SUNRAIN Vaccum Tube Solar Collector! Vacuum tube solar collectors are amongst the most efficient and most costly types of solar collectors.
More informationContact person Date Reference Page Mikael Videby P08110A 1 (6) SP Structural and Solid Mechanics
issued by an Accredited Testing Laboratory Contact person Mikael Videby 2015-11-13 5P08110A 1 (6) SP Structural and Solid Mechanics +46 10 516 50 36 Mikael.Videby@sp.se Accred. No. 1002 Testing ISO/IEC
More informationissued by Notified Body No according to 2014/32/EU MID FULL QUALITY ASSURANCE Module H
This certificate may not be reproduced other than in full, except with the pri written approval by RISE Certification. issued by Notified Body No. 040 accding to 014/3/EU MID FULL QUALITY ASSURANCE Module
More informationAmendment to Test Report
Test Report issued under the responsibility of www.nemko.com Amendment to Test Report This Amendment is valid only together with the main Test Report Report No.... : 277782 Main Report No.... : 261294
More informationCertificate of constancy of performance
0402 - CPR SC1312-11 In compliance with Regulation 305/2011/EU of the European Parliament and of the Council of 9 March 2011 (the Construction Products Regulation or CPR), this certificate applies to the
More informationContact person Date Reference Page Michael Lindblad F025884B 1 (1) Sustainable Built Environment
issued by an Accredited Testing Laboratory Contact person Michael Lindblad 2015-05-09 5F025884B 1 (1) Sustainable Built Environment +46 10 516 58 58 Michael.Lindblad@sp.se Accred. No. 1002 Testing ISO/IEC
More informationTEST REPORT IEC Information technology equipment Safety Part 1: General requirements
Test Report issued under the responsibility of: TEST REPORT IEC 60950-1 Information technology equipment Safety Part 1: General requirements Report Number.... : 1510053STO-001 Date of issue... : 2 November
More informationContact person Date Reference Page Michael Lindblad F025884A 1 (1) Sustainable Built Environment
issued by an Accredited Testing Laboratory Contact person Michael Lindblad 2015-05-09 5F025884A 1 (1) Sustainable Built Environment +46 10 516 58 58 Michael.Lindblad@sp.se Accred. No. 1002 Testing ISO/IEC
More informationSAFETY AND COMPLIANCE TESTING FOR SURESTOP
SAFETY AND COMPLIANCE TESTING FOR SURESTOP Tested Sample(s) Brand Model Color Size Vendor P/N Country of Origin Age Grading Children s Product : Bicycle Brake Pads : SureStop : SureStop Brakes Prepared
More informationExample printout. Building project. SDC Example. Dyfi Eco Park SY20 8AX Machynlleth UK. Mr C. Laughton Phone:
Building project SDC Example Dyfi Eco Park SY20 8AX Machynlleth UK Contact person: Mr C. Laughton Phone: 01654 700324 E-Mail: software@solardesign.co.uk Results of annual simulation Installed collector
More information1 / 33. TÜV Rheinland (Shanghai) Co., Ltd Solar/ Fuelcell Technologies. Test Report
1 / 33 TÜV Rheinland (Shanghai) Co., Ltd Solar/ Fuelcell Technologies Test Report Qualification of a Solar Collector in accordance with DIN EN 129751: 2011; DIN EN 129752: 2006 TÜV Report No.: 154035663_EN_ETC30_Report_Gao
More informationNCC Leisure Battery Verification Scheme. Leisure Accommodation Vehicles
The UK trade body for the caravan, motorhome, caravan holiday and park home industry. NCC Leisure Battery Verification Scheme Leisure Accommodation Vehicles Page 1 of 11 1 Scope The NCC Battery Verification
More informationTest of child safety locking device for windows (1 appendix) Summary
issued by an Accredited Testing Laboratory Contact person Patrik Spånglund 2015-11-03 5P06869 1 (5) SP Structural and Solid Mechanics +46 10 516 56 00 Patrik.Spanglund@sp.se Ackred no. 1002 Testing ISO/IEC
More informationResults of annual simulation
2 x Vitosol 100-FM SVKF Total gross surface area:4,46 m² Azimuth: 0 Incl.: 30 160 Liters/Day 50 C Gas-fired boiler 26 kw Vitocell 100-B Vol : 250 l Results of annual simulation Installed collector power:
More informationNombre de modules. Number of modules. Kollektoranzahl. Bezeichnung. Modèle. Model. m² m m min - max litres mm mm litres
Summary EN 297 Test Results, Kurzfassung EN 297 Test Ergebnisse, Anlage zum Solar KEYMARK-Zertifikat Synthèse s résultas d'essais selon EN 297, Annexe au certificat Solar Register-Nr. s Zertifikat Numéro
More informationHydraulic fluid power Dimensions and requirements of quick-action couplings
INTERNATIONAL STANDARD ISO 7241 First edition 2014-07-15 Hydraulic fluid power Dimensions and requirements of quick-action couplings Transmissions hydrauliques Dimensions et exigences des raccords rapides
More informationAmendment to Test Report
Test Report issued under the responsibility of www.nemko.com Amendment to Test Report This Amendment is valid only together with the main Test Report Report No.... : 277779 Main Report No.... : 246847
More informationA brief guide for identification of non-compliant construction machinery. Is this. Compactor / Roller compliant with European legislation?
A brief guide for identification of non-compliant construction machinery Is this Compactor / Roller compliant with European legislation? Introduction Construction equipment placed on the EU market for
More informationfor the use of SIQ Type Approved certification mark Sl-SIQ BG 004/081 Project file: C DIN Rail Power Supply
Si l!~ Licence Number: Product: Type reference: Trademark: Sl-SIQ BG 4/81 Project file: C215195 DIN Rail Power Supply DRM-24V12W1 PX(y); X: any alphanumeric character except Y and Z or blank; (y): any
More informationTEST REPORT IEC Information technology equipment Safety Part 1: General requirements
Test Report issued under the responsibility of: TEST REPORT IEC 60950-1 Information technology equipment Safety Part 1: General requirements Report Number.... : 207809-CI3-3 CB DE1-9640/A2 Date of issue...
More informationResin Impregnated Paper Bushing, Oil to SF 6. , Type GSBK
1ZSC563-AAA en, Rev. 2 Resin Impregnated Paper Bushing, Oil to SF 6, Type GSBK Technical guide This Technical Guide has been produced to allow transformer manufacturers, and their designers and engineers,
More informationHydraulic fluid power Dimensions and requirements for screw-toconnect quick-action couplings for general purpose
INTERNATIONAL STANDARD ISO 14541 First edition 2013-03-15 Hydraulic fluid power Dimensions and requirements for screw-toconnect quick-action couplings for general purpose Transmissions hydrauliques Dimensions
More informationISO INTERNATIONAL STANDARD. Earth-mover tyres and rims Part 3: Rims. Pneumatiques et jantes pour engins de terrassement Partie 3: Jantes
INTERNATIONAL STANDARD ISO 4250-3 Fourth edition 2011-05-01 Earth-mover tyres and rims Part 3: Rims Pneumatiques et jantes pour engins de terrassement Partie 3: Jantes Reference number ISO 4250-3:2011(E)
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 10100 Second edition 2001-08-01 Hydraulic fluid power Cylinders Acceptance tests Transmissions hydrauliques Vérins Essais de réception Reference number ISO 10100:2001(E) ISO
More informationTillers Motor hoes (combustion engine powered)
Compliance Guide Rev.2.1, Edition 04/2018 This guide is intended to help market surveillance authorities with the checking of conformity of combustion engine powered brush-cutters and grass trimmers in
More informationType: Office work chair Lab.no.: Depth: 650 mm Width: 710 mm Height: 1345 mm Weight: 18,8 kg. EN :2009 and EN :2009.
Lanab Design Aktiebolag Attn.: Åke Jansson Lerbacksgatan 7 SE-571 38 NÄSSJÖ Order no. 515628 Appendices 3 Initials laha/prni/hbs Report Material: Model: LD6340/LD6240 Type: Office work chair Lab.no.: 515628-2
More informationEarthing Principles. Symmetra PX 250/500 kw
Earthing Principles Symmetra PX 250/500 kw Table of Contents Earthing Principles... 1 Decoding the Earthing Types... 1 TN Systems... 2 Characteristics... 2 Reference to IEC/EN 60364-4-41 413.1.3... 2
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 8535-1 Fifth edition 2011-12-01 Diesel engines Steel tubes for highpressure fuel injection pipes Part 1: Requirements for seamless cold-drawn single-wall tubes Moteurs diesels
More informationTransformer bushings, type GOH. Technical guide
Transformer bushings, type GOH Technical guide This Technical Guide has been produced to allow transformer manufacturers, and their designers and engineers, access to all the technical information required
More informationEC-CERTIFICATE OF CONFORMITY 0432 CPD 0031
MATERIALPRÜFUNGSAMT NORDRHEI N - WESTFALEN EC-CERTIFICATE OF CONFORMITY 0432 CPD 0031 In compliance with the Directive 89/106/EEC of the Council of European Communities of 21 December 1988 on the approximation
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 12405-1 First edition 2011-08-15 Electrically propelled road vehicles Test specification for lithium-ion traction battery packs and systems Part 1: High-power applications Véhicules
More informationISO INTERNATIONAL STANDARD. Seal-less rotodynamic pumps Class II Specification
INTERNATIONAL STANDARD ISO 15783 First edition 2002-02-01 Seal-less rotodynamic pumps Class II Specification Pompes rotodynamiques sans dispositif d'étanchéité d'arbre Classe II Spécifications Reference
More informationContactors. CH1130/02 Series Single pole high-voltage contactor up to 3 kv Catalogue C170.en. Connect - Contact - Control
Connect - Contact - Control 3 Contactors CH1130/02 Series Single pole high-voltage contactor up to 3 kv Catalogue C170.en More information at: schaltbau-gmbh.com 42 CH1130/02 Single pole high-voltage contactor
More informationISO 1217 INTERNATIONAL STANDARD. Displacement compressors Acceptance tests. Compresseurs volumétriques Essais de réception. Fourth edition
INTERNATIONAL STANDARD ISO 1217 Fourth edition 2009-07-01 Displacement compressors Acceptance tests Compresseurs volumétriques Essais de réception Reference number ISO 1217:2009(E) ISO 2009 PDF disclaimer
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 12405-3 First edition 2014-05-15 Electrically propelled road vehicles Test specification for lithium-ion traction battery packs and systems Part 3: Safety performance requirements
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 1179-1 Second edition 2013-11-01 Connections for general use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Part 1: Threaded
More informationRide-on lawnmowers (combustion engine powered)
Compliance Guide Rev.2.3 Edition 04/2018 Ride-on lawnmowers (combustion engine powered) This guide is intended to help market surveillance authorities with the checking of conformity of combustion engine
More informationGuangzhou Vkan Certification and Testing Institute (CVC former GTIHEA)
CNAS L0095 age 1 of 14 ages No.: GJW2009-0893 TEST REORT NAME OF SAMLE: Valve Regulated Lead Acid Battery CLIENT: Shenzhen Center ower Tech. Co., Ltd. CLASSIFICATION OF TEST: Commission Test Guangzhou
More informationDevelopment. COMPact impresses with a series of technical innovations and advantages, which make it efficient and economical to use.
Founded in: 1898 Employees: > 550 Subsidiaries: Manufacturing: Sales: Ortlinghaus (U.K.) Ltd. / England Ortlinghaus France / France Ortlinghaus AG / Switzerland Ortlinghaus Drive Technology (Shanghai)
More informationDVGW Prüflaboratorium Gas DBI Gastechnologisches Institut ggmbh FREIBERG
Page: 2 of 10 Report No. R e p o r t Contents: Page Test model 3 Applicable examinations 3 Explanations / characteristics 3 Countries / categories / inlet pressures 4 Technical data 5 Execution variants
More informationTEST REPORT IEC Information technology equipment Safety Part 1: General requirements
Test Report issued under the responsibility of: TEST REPORT IEC 60950-1 Information technology equipment Safety Part 1: General requirements Report Number.... : 31282706.003 Date of issue... : 22 nd March,
More informationKeymark Conference. Demands of Mineral Wool Manufacturers
Keymark Conference Demands of Mineral Wool Manufacturers Berlin, october 2016 FMI -Association overview Stonewool glasswool market share 2013 (m 3 ) 8% 6% 8% MiWo EPS PUR 11 factories employees 28% 50%
More informationfor the use of SIQ Type Approved certification mark 51-SIQ BG 004/130 Project file: C DIN Rail Power Supply
SIA 'I Licence Number: Product: Type reference: Trademark: 51-SIQ BG 4/13 Project file: C216972 DIN Rail Power Supply DRM-24V48W1 PX(y); X: any alphanumeric character except Y and Z or blank; (y): any
More informationOrtlinghaus Group. Prop.act impresses with a series of technical innovations and advantages, which make it efficient and economical to use.
Founded in: 1898 Employees: > 550 Subsidiaries: Manufacturing: Sales: Ortlinghaus (U.K.) Ltd. / England Ortlinghaus France / France Ortlinghaus AG / Switzerland Ortlinghaus Drive Technology (Shanghai)
More informationIntegrated temperature test and calibration bench Model CBS-SC4000
Calibration technology Integrated temperature test and calibration bench Model CBS-SC4000 WIKA data sheet CT 92.33 Applications Testing and calibration of temperature measuring instruments such as: - Mercury
More informationTHE NETHERLANDS (N E D E R L A N D) COMMUNICATION
Vehicle Technology Division THE NETHERLANDS (N E D E R L A N D) COMMUNICATION Concerning (1) : - approval granted - approval extended - approval refused - approval withdrawn - production definitely discontinued
More informationTEST REPORT IEC Information technology equipment Safety Part 1: General requirements
Test Report issued under the responsibility of: TEST REPORT IEC 60950-1 Information technology equipment Safety Part 1: General requirements Report Number.... : 207809-CI3-2 CB DE1-49619/A2/B1/M2 Date
More informationIES LM MEASURING LUMEN MAINTENANCE OF LED LIGHT SOURCES
IES LM-80-2008 MEASURING LUMEN MAINTENANCE OF LED LIGHT SOURCES MEASUREMENT AND TEST REPORT For Guangzhou Hongli Opto-Electronic Co., Ltd. West side of Dongfeng Highway, Automobile industrial Base, Huadu
More informationIQLab Pack UNDOT Test Report
IQ Laboratories 508 Chundong Road Shanghai 201108 China IQLab Pack UNDOT Test Report Tested According To UN Manual of Tests and Criteria, Part III, subsection 38.3, Rev 5 Name of Sample: Rechargeable Lithium
More informationINSTALLATION MANUAL OF EZINC OPEN LOOP THERMO SIPHON SOLAR WATER HEATING SYSTEMS
INSTALLATION MANUAL OF EZINC OPEN LOOP THERMO SIPHON SOLAR WATER HEATING SYSTEMS 1) INTRODUCTION 2) GENERAL FEATURES 3) OPERATION INSTRUCTIONS 4) SUPPORT BASE AND MOUNTING STEPS 5) FITTINGS & CONNECTIONS
More informationTEST REPORT IEC Information technology equipment Safety Part 1: General requirements
Test Report issued under the responsibility of: TEST REPORT IEC 60950-1 Information technology equipment Safety Part 1: General requirements Report Number.... : 221868-CI3-2 CB DE1-56824 Date of issue...
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 10924-2 First edition 2014-02-15 Road vehicles Circuit breakers Part 2: User s guide Véhicules routiers Coupe-circuits Partie 2: Guide de l utilisateur Reference number ISO 10924-2:2014(E)
More informationMETALLIC MATERIALS - CONVERSION OF HARDNESS VALUES (ISO 18265:2003) IRISH STANDARD I.S. EN ISO 18265:2003. Price Code
IRISH STANDARD I.S. EN ISO 18265:2003 ICS 77.040.01 National Standards Authority of Ireland Dublin 9 Ireland Tel: (01) 807 3800 Tel: (01) 807 3838 METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES (ISO
More informationUNITED STATES ENVIRONMENTAL PROTECTION AGENCY OFFICE OF TRANSPORTATION AND AIR QUALITY ENGINE INTERNATIONAL AIR POLLUTION PREVENTION CERTIFICATE
UNITED STATES ENVIRONMENTAL PROTECTION AGENCY OFFICE OF TRANSPORTATION AND AIR QUALITY ENGINE INTERNATIONAL AIR POLLUTION PREVENTION CERTIFICATE Manufacturer: Engine Family: Certificate Number: AB VOLVO
More informationLevel 2. Certificate of Conformity. Australian Certification Services Pty Ltd grants to the WaterMark User: Watersave Australia Pty Ltd
Level 2 Certificate of Conformity Australian Certification Services Pty Ltd grants to the WaterMark User: Watersave Australia Pty Ltd Trading as Watersave Australia the right to use the WaterMark as shown
More informationTechnical Information
Subject Application of "Approved Method" to existing diesel engines under the provisions of Revised MARPOL ANNEX VI - Certification of an Approved Method for WÄRTSILÄ RTA engines - To whom it may concern
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 15524 First edition 2011-11-01 Pneumatic fluid power Cylinders Single-rod short-stroke cylinders, 1 000 kpa (10 bar) series, bores from 20 mm to 100 mm Transmissions pneumatiques
More informationTHE NETHERLANDS (N E D E R L A N D) COMMUNICATION. Approval number: E4-23R Extension number: 00
Vehicle Technology Division THE NETHERLANDS (N E D E R L A N D) COMMUNICATION Concerning (1) : - approval granted - approval extended - approval refused - approval withdrawn - production definitely discontinued
More informationProduct range Solex Technical data and dimensioning. 5 Years
Qualität made in Germany Product range Solex Technical data and dimensioning Quality made in Germany 5 Years Handwerkergarantie m anufacturer s warranty Product range Solex Dimensioning High-Flow system
More informationEC-CERTIFICATE OF CONFORMITY 0432 CPD 0031
EC-CERTIFICATE OF CONFORMITY 0432 CPD 0031 In compliance with the Directive 89/106/EEC of the Council of European Communities of 21 December 1988 on the approximation of laws, regulations and administrative
More informationSolar Thermal. Grant Solar Pump Station Installation & Servicing Instructions
Solar Thermal Grant Solar Pump Station Installation & Servicing Instructions Part No. DOC 96. Rev 02. October 2012 Important Note Important Note for Installers The Pump Station supplied with your Grant
More informationTEST REPORT IEC Information technology equipment Safety Part 1: General requirements
Test Report issued under the responsibility of: TEST REPORT IEC 60950-1 Information technology equipment Safety Part 1: General requirements Report Number.... : 1510050STO-001 Date of issue... : 26 October
More informationCERTIFICATE OF CONFORMITY
CERTIFICATE OF CONFORMITY This is to certify that Product Description, Purpose or Use Polyethylene (PE) pipes for pressure applications Certificate Holder ASA Plastics Pty Ltd Polyethylene (PE) Pipes Complies
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 1179-2 First edition 2007-08-15 Connections for general use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Part 2: Heavy-duty
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IS0 7483 First edition 1991-10-01 --- ---- -.----.----_-- -_ ----- - - Dimensions of gaskets for use with flanges to IS0 7005 Dimensions des joints B utiliser avec les brides de
More informationResin Impregnated Paper Bushing, Oil to Air, Type GSB Technical guide
1ZSC000563-AAC en, Rev. 2 Resin Impregnated Paper Bushing, Oil to Air, Type GSB Technical guide This Technical Guide has been produced to allow transformer manufacturers, and their designers and engineers,
More informationDS Series Solar System
DS Series Solar System Permit information Consol 30-58-1800 Collector Flat mount on Colorsteel Plumdeck roofing Valve vent, Open loop http:// www.consolsolar.co.nz 21 Page 1 of This system is an evacuated
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 16852 Second edition 2016-10-15 Flame arresters Performance requirements, test methods and limits for use Arrête-flammes Exigences de performance, méthodes d essai et limites
More informationTest Report No.: SDHGR FM Date: Jun.08, 2012 Page 1 of 3
Test Report No.: SDHGR120501002FM Date: Jun.08, 2012 Page 1 of 3 HONGGE (GUANGZHOU) PAPER CO., LTD BUILDING 1, HE TAI INDUSTRY ZONE, HE TAI ROAD NO.2, HE BIAN, JIA HE TOWN, BAI YUN DISTRICT, GUANGZHOU.
More informationCOMMISSION REGULATION (EC)
L 191/26 Official Journal of the European Union 23.7.2009 COMMISSION REGULATION (EC) No 640/2009 of 22 July 2009 implementing Directive 2005/32/EC of the European Parliament and of the Council with regard
More informationDVGW Prüflaboratorium Gas DBI Gastechnologisches Institut ggmbh FREIBERG
Page: 2 of 10 Report No.: R e p o r t Contents: Page Test model 3 Applicable examinations 3 Explanations / characteristics 3 Countries / categories / inlet pressures 4 Technical data 5 Execution variants
More informationTYPE APPROVAL CERTIFICATE
Page 1 / 5 File number: AP4599 Product code: 2592I This certificate is not valid when presented without the full attached schedule composed of 7 sections www.veristar.com Requirements: Bureau Veritas Rules
More informationISO 9129 INTERNATIONAL STANDARD. Motorcycles Measurement methods for moments of inertia. Motocycles Méthodes de mesure des moments d'inertie
INTERNATIONAL STANDARD ISO 9129 Second edition 2008-05-15 Motorcycles Measurement methods for moments of inertia Motocycles Méthodes de mesure des moments d'inertie Reference number ISO 2008 PDF disclaimer
More informationCOVER PAGE FOR TEST REPORT
Issue Date: 2007-05-22 Page 1 of 2 Report Reference # E116994-A35-CB-1 Amendment 1 2008-04-24 COVER PAGE FOR TEST REPORT Test Item Description: DC Power Supplies Model/Type Reference: Class I Models: GNT2XXX-YYY
More informationHedge trimmers (combustion engine powered)
Compliance Guide Rev.2.1 Edition 04/2018 Hedge trimmers (combustion engine powered) European Garden Machinery Federation EGMF Bd Reyers 80, 1030 Brussels, Belgium secretariat@egmf.org +32 2 706 82 37 This
More informationFUNCTIONAL SAFETY CERTIFICATE
FUNCTIONAL SAFETY CERTIFICATE This is to certify that the 1500 & 1600 Series 3/2 Single Pilot Operated Valves Manufactured by Rotork Midland Ltd Patrick Gregory Rd, Wolverhampton, West Midlands, WV11 3DZ.
More informationSB./SP./ST. RK-A./TPC
Temperature sensors SB./SP./ST. RK-A./TPC Model Range C Sensing element Application SBA T50 Balco Room SBA20 T50 n.2 Balco Room SBA55 5T35 Balco+pot. Room SBC -10T120 Balco Immersion SBD -20T65 Balco Air
More informationChain-saws (combustion engine powered)
Compliance Guide Rev.4.2, Edition 04/2018 Chain-saws (combustion engine powered) European Garden Machinery Federation EGMF Bd Reyers 80, 1030 Brussels, Belgium secretariat@egmf.org +32 2 206 68 66 This
More informationMEASUREMENT AND TEST REPORT
IES LM-80-2008 MEASURING LUMEN MAINTENANCE OF LED LIGHT SOURCES MEASUREMENT AND TEST REPORT For Guangzhou Hongli Opto-Electronic Co., Ltd. West side of Dongfeng Highway, Automobile industrial Base, Huadu
More informationTHE NETHERLANDS (N E D E R L A N D) COMMUNICATION. Approval number: E4-110R Extension number: 00
Vehicle Technology Division THE NETHERLANDS (N E D E R L A N D) COMMUNICATION Concerning (1) - approval granted - approval extended - approval refused - approval withdrawn - production definitely discontinued
More informationInstallation Instructions. Vitosol 100. Vitosol 100 Type w 2.5 Flat collector for flat roofs and freestanding installation Part No.
Installation Instructions Vitosol 100 Type w 2.5 Flat collector for flat roofs and freestanding installation Part No. 3001 970 Vitosol 100 8/99 Safety instructions This hazard symbol precedes all important
More informationISO 6264 INTERNATIONAL STANDARD. Hydraulic fluid power Pressure-relief valves Mounting surfaces
INTERNATIONAL STANDARD ISO 6264 Second edition 1998-03-01 Hydraulic fluid power Pressure-relief valves Mounting surfaces Transmissions hydrauliques Limiteurs de pression Plan de pose A Reference number
More information