DRIVES, CONTROLLERS & COUPLINGS CATALOGUE

Size: px

Start display at page:

Download "DRIVES, CONTROLLERS & COUPLINGS CATALOGUE"

Joseph Rose
5 years ago
Views:

1 Ashley Power Ltd Ashley Road Parkstone Poole Dorset, BH14 0AQ DRIVES, CONTROLLERS & COUPLINGS CATALOGUE Tel: +44 (0) Fax: +44 (0)

2 Inverters, Electric Motors, Gearboxes, Couplings & Universal Joint Contents Inverters & Electric Motors...G Worm Gear Units... H Couplings & Universal Joints...J Please note: At Ashley Power we take care to ensure that all information is correct at time of printing however some errors and omissions excepted.

3 Ashley Power Ltd Ashley Road Parkstone Poole Dorset, BH14 0AQ INVERTERS & ELECTRIC MOTORS CATALOGUE Tel: +44 (0) Fax: +44 (0) G1

4 Inverters Electric Motors G2

Contents Inverters...........G4 Three Phase Electric Motors - Frame Sizes...G6 Three Phase Electric Motors - Technical Data..G13 Single Phase Electric Motors - Cap Start Cap Run - Frame Sizes.

5 Contents Inverters G4 Three Phase Electric Motors - Frame Sizes...G6 Three Phase Electric Motors - Technical Data..G13 Single Phase Electric Motors - Cap Start Cap Run - Frame Sizes... G16 Single Phase Electric Motors - Cap Start Cap Run - Technical Data...G17 Single Phase Electric Motors - Permanent Capacitor - Frame Sizes... G20 Single Phase Electric Motors - Permanent Capacitor - Technical Data... G21 TEL: FAX: sales@ashleypower.co.uk G3

6 Inverters Introduction The 650 series is a family of AC drives that provide a no-fuss, cost ef fective solution for the simplest to the most complex open-loop AC motor control applications. The 650 has single key selectable preprogrammed applications so set-up is quick and easy without unecessary complications. Powers are available up to 1.5kW on Single Phase 230V supplies, and up to 10kW 1 on Three Phase 400V supplies, and all units are available with integral EMC compliant filters. Technical Specification Power Supply: Single Phase Units: Vac +/- 10%; 50-60Hz +/- 5% Three Phase Units: Vac +/- 10%; 50-60Hz +/-5% Ambient: 0-40 C Overload: 150% for 30 Seconds Output Frequency: 0-240Hz Enviromental Protection: IP20 Inputs/Outputs Analogue Inputs: 2; Speed control (0-10V, 4-20mA) Analogue Outputs: 1; User configurable output frequency/load (0-10V) Digital Inputs: 3 (650V 6); User configurable start/stop/direction/pre-set speeds (8) Digital Inputs/Outputs: 1 (650V 2); User configurable as input or output Digital Relay Outputs: 1; User configurable relay output 240V) All outputs configurable for : at (not at) speed / at (above) min speed / running (stopped) / healthy (tripped) / above (below) preset load. Motor Thermistor Input Integral Programming/Control Module 6 Button password protectable keypad giving control of: - Start / Stop - Direction - Raise / Lower Speed - Menu Navigation - Parameter Setting Backlit LCD giving 4-digit readout of: - Output Current - Setpoint Frequency - Drive Rotating Warning - Status Alarms (inc. Drive Ready; Overcurrent Trip; Overvoltage Trip; Heatsink Overtemp.; Motor Overtemp. + others G4

7 Inverters Single Phase Controllers (230V Nominal) Three Phase Controllers (400V Nominal) Type Nominal Output Package Power Current Size (kw) (A) F F F F F F Type Nominal Output Package Power Current Size (kw) (A) F F F F F F F F F F VC (15) 23 (31) C 650VC (18) 30 (37) C 650VD (22) 38 (45) D 650VD (30) 45 (59) D 650VD (37) 59 (73) D 650VE (45) 73 (87) E 650VE (55) 87 (105) E 650VE (75) 105 (145) F 650VE (90) 145 (165) F 650VE (110) 180 (205) F Unit Dimensions Package Overall Dimensions Fixing Centre Weight Size H W D H1 W1 (kg) B C D E F Package Size 1, 2 & 3 Package Size B, C, D, E & F G5

3 Phase Electric Motor Frame Size - B3 Frame H A B C D E F G K AA AC 56 56 90 71 36 φ9 20 3 7.2 5.8 x 8.8 110 φ117 63 63 100 80 40 φ11 23 4 8.

5 10 x 13 160 φ163 90 S 90 140 100 56 φ24 50 8 20 10 x 13 175 φ183 90L1/L2 90 140 125 56 φ24 50 8 20 10 x 13 175 φ183 100** 100 160 140 63 φ28 60 8 24 12 x 15 198 φ205 112 112 190 140 70 φ28 60 8 24

8 3 Phase Electric Motor Frame Size - B3 Frame H A B C D E F G K AA AC φ x φ φ x φ130 71** φ x φ φ x φ S φ x φ183 90L1/L φ x φ ** φ x φ φ x φ S φ x φ M/L φ x φ M/L / φ x φ M/L / φ x φ L φ x φ368 Frame L KK TBS TBW TBH SS xx ZZ CC Y M16x M M16x M ** 241(255) 1-M20x M M20x M S M20x M L1/L2 337/367 1-M20x M ** 369(387) 2-M20x M M25x M S M25x M M/L 475/501 2-M25x M M/L M32x M M/L M32x M L M40x M **This frame size has 2 options, the rated output is normal for "L" size and increased output is for the larger "L" size. (refer to the figures in the bracket "()") G6

3 Phase Electric Motor Frame Size - B5 Frame B5 B5R M N P T R S M N P T R S D E 56 φ100 φ80 φ120 3 0 φ7 φ9 20 63 φ115 φ95 φ140 3 0 φ10 φ11 23 71** φ130 φ110 φ160 3.5 0 φ10 φ115 φ95 φ140 3.

5 0 φ10 φ19 40 90 S φ165 φ130 φ200 3.5 0 φ12 φ130 φ110 φ160 3.

9 3 Phase Electric Motor Frame Size - B5 Frame B5 B5R M N P T R S M N P T R S D E 56 φ100 φ80 φ φ7 φ φ115 φ95 φ φ10 φ ** φ130 φ110 φ φ10 φ115 φ95 φ φ10 φ φ165 φ130 φ φ12 φ130 φ110 φ φ10 φ S φ165 φ130 φ φ12 φ130 φ110 φ φ10 φ L1/L2 φ165 φ130 φ φ12 φ130 φ110 φ φ10 φ * φ215 φ180 φ φ15 φ165 φ130 φ φ12 φ φ215 φ180 φ φ15 φ165 φ130 φ φ12 φ S φ265 φ230 φ φ15 φ215 φ180 φ φ15 φ M/L φ265 φ230 φ φ15 φ215 φ180 φ φ15 φ M/L φ300 φ250 φ φ19 φ M/L φ300 φ250 φ φ19 φ L φ350 φ300 φ φ19 φ Frame F G KK AC HD L TBS TBW TBH SS xx ZZ CC Y M16 x1.5 φ M M16 x1.5 φ M ** M20 x1.5 φ (255) M M20 x1.5 φ M S M20 x1.5 φ M L1/L M20 x1.5 φ / M * M20 x1.5 φ (387) M M25 x1.5 φ M S M25 x1.5 φ M M/L M25 x1.5 φ / M M/L M32 x1.5 φ M M/L M32 x1.5 φ M L M40 x1.5 φ M **This frame size has 2 options, the rated output is normal for "L" size and increased output is for the larger "L" size. (refer to the figures in the bracket "()") G7

3 Phase Electric Motor Frame Size - B14 Frame B14 B14R M N P T R S M N P T R S D E 56 φ65 φ50 φ80 2.5 0 M6 φ9 20 63 φ75 φ60 φ90 2.5 0 M6 φ100 φ80 φ120 3 M6 φ11 23 71** φ85 φ70 φ105 2.

5 0 M8 φ24 50 100* φ130 φ110 φ160 3.5 0 M8 φ165 φ130 φ200 3.

10 3 Phase Electric Motor Frame Size - B14 Frame B14 B14R M N P T R S M N P T R S D E 56 φ65 φ50 φ M6 φ φ75 φ60 φ M6 φ100 φ80 φ120 3 M6 φ ** φ85 φ70 φ M6 φ115 φ95 φ M8 φ φ100 φ80 φ M6 φ130 φ110 φ M8 φ S φ115 φ95 φ M8 φ130 φ110 φ M8 φ L1/L2 φ115 φ95 φ M8 φ130 φ110 φ M8 φ * φ130 φ110 φ M8 φ165 φ130 φ M10 φ φ130 φ110 φ M8 φ165 φ130 φ M10 φ S φ165 φ130 φ M10 φ215 φ180 φ M12 φ M/L φ165 φ130 φ M10 φ215 φ180 φ M12 φ M/L φ215 φ180 φ M12 φ Frame F G KK AC HD L TBS TBW TBH SS xx ZZ CC Y M16 x1.5 φ M M16 x1.5 φ M ** M20 x1.5 φ (255) M M20 x1.5 φ M S M20 x1.5 φ M L1/L M20 x1.5 φ / M * M20 x1.5 φ (387) M M25 x1.5 φ M S M25 x1.5 φ M M/L M25 x1.5 φ / M M/L M32 x1.5 φ M **This frame size has 2 options, the rated output is normal for "L" size and increased output is for the larger "L" size. (refer to the figures in the bracket "()") G8

3 Phase Electric Motor Frame Size - B35 Frame B35 B35R H M N P T R S M N P T R S 56 56 φ100 φ80 φ120 3 0 φ7 63 63 φ115 φ95 φ140 3 0 φ10 71** 71 φ130 φ110 φ160 3.5 0 φ10 115 95 140 3.

11 3 Phase Electric Motor Frame Size - B35 Frame B35 B35R H M N P T R S M N P T R S φ100 φ80 φ φ φ115 φ95 φ φ10 71** 71 φ130 φ110 φ φ φ φ165 φ130 φ φ φ10 90 S 90 φ165 φ130 φ φ φ10 90L1/L2 90 φ165 φ130 φ φ φ10 100** 100 φ215 φ180 φ φ φ φ215 φ180 φ φ φ12 132S 132 φ265 φ230 φ φ φ15 132M/L 132 φ265 φ230 φ φ φ15 160M/L 160 φ300 φ250 φ φ19 180M/L 180 φ300 φ250 φ φ19 200L 200 φ350 φ300 φ φ19 Frame A B C D E F G K KK AA AD AC L φ x8.8 1-M16x φ φ x10 1-M16x φ ** φ x10 1-M20x φ (255) φ x13 1-M20x φ S φ x13 1-M20x φ L1/L φ x13 1-M20x φ / ** φ x15 2-M20x φ (387) φ x15 2-M25x φ S φ x15 2-M25x φ M/L φ x15 2-M25x φ / M/L / φ x19 2-M32x φ M/L / φ x25 2-M32x φ L φ x29 2-M40x φ **This frame size has 2 options, the rated output is normal for "L" size and increased output is for the larger "L" size. (refer to the figures in the bracket "()") G9

12 3 Phase Electric Motor Frame Size - B35 Continues Frame TBS TBW TBH SS XX ZZ CC Y M M ** M M S M L1/L M ** M M S M M/L M M/L M M/L M L M **This frame size has 2 options, the rated output is normal for "L" size and increased output is for the larger "L" size (refer to the figures in the bracket "()") G10

13 3 Phase Electric Motor Frame Size - B34 Frame B34 B34R H M N P T R S M N P T R S φ65 φ50 φ M φ75 φ60 φ M5 φ100 φ80 φ120 3 M6 71** 71 φ85 φ70 φ M6 φ115 φ95 φ M φ100 φ80 φ M6 φ130 φ110 φ M8 90 S 90 φ115 φ95 φ M8 φ130 φ110 φ M8 90L1/L2 90 φ115 φ95 φ M8 φ130 φ110 φ M8 100** 100 φ130 φ110 φ M8 φ165 φ130 φ M φ130 φ110 φ M8 φ165 φ130 φ M10 132S 132 φ165 φ130 φ M10 φ215 φ180 φ M12 132M/L 132 φ165 φ130 φ M10 φ215 φ180 φ M12 160M/L 160 φ215 φ180 φ M12 Frame A B C D E F G K KK AC AD AA L φ x8.8 1-M16x1.5 φ φ x10 1-M16x1.5 φ ** φ x10 1-M20x1.5 φ (255) φ x13 1-M20x1.5 φ S φ x13 1-M20x1.5 φ L1/L φ x13 1-M20x1.5 φ / ** φ x15 2-M20x1.5 φ (387) φ x15 2-M25x1.5 φ S φ x15 2-M25x1.5 φ M/L φ x15 2-M25x1.5 φ / M/L / φ x19 2-M32x1.5 φ **This frame size has 2 options, the rated output is normal for "L" size and increased output is for the larger "L" size. (refer to the figures in the bracket "()") G11

3 Phase Electric Motor Frame Size - B35 Continued Frame TBS TBW TBH SS XX ZZ CC Y 56 14 88 88 M3 9 12 2.5 0.5 63 14 94 94 M4 10 14 3.3 0.8 71** 20 94 94 M5 12 17 4.2 0.

14 3 Phase Electric Motor Frame Size - B35 Continued Frame TBS TBW TBH SS XX ZZ CC Y M M ** M M S M L1/L M ** M M S M M/L M M/L M **This frame size has 2 options, the rated output is normal for "L" size and increased output is for the larger "L" size. (refer to the figures in the bracket "()") G12

15 3 Phase Electric Motors - IEC 1 - Technical Data 2 Pole APL TEC Power Frame Current (A) Current (A) Current (A) Part No Part No (KW) Size 220V 380V 660V 230V 400V 690V 240V 415V 720V 3PH.09KW2P TECA PH.12KW2P TECA PH.18KW2P TECA PH.18KW2P TECA PH.25KW2P TECA PH.37KW2P TECA PH.37KW2P TECA PH.55KW2P TECA APL Speed Eff. Current Power Factor Tmax/Tn Tst/Tn Ist/In Noise Weight Part No (r/min) (%) (A) (Cos Φ) (Times) (Times) (Times) db(a) (Kg) 3PH.09KW2P PH.12KW2P PH.18KW2P PH.18KW2P PH.25KW2P PH.37KW2P PH.37KW2P PH.55KW2P Pole APL TEC Power Frame Current (A) Current (A) Current (A) Part No Part No (KW) Size 220V 380V 660V 230V 400V 690V 240V 415V 720V 3PH.06KW4P TECA PH.09KW4P TECA PH.12KW4P TECA PH.18KW4P TECA PH.25KW4P TECA PH.25KW4P TECA PH.37KW4P TECA PH.55KW4P TECA PH.55KW4P TECA APL Speed Eff. Current Power Factor Tmax/Tn Tst/Tn Ist/In Noise Weight Part No (r/min) (%) (A) (Cos Φ) (Times) (Times) (Times) db(a) (Kg) 3PH.06KW4P PH.09KW4P PH.12KW4P PH.18KW4P PH.25KW4P PH.25KW4P PH.37KW4P PH.55KW4P PH.55KW4P G13

16 3 Phase Electric Motors - IEC 1 - Technical Data 6 Pole APL TEC Power Frame Current (A) Current (A) Current (A) Part No Part No (KW) Size 220V 380V 660V 230V 400V 690V 240V 415V 720V 3PH.09KW6P TECA PH.12KW6P TECA PH.18KW6P TECA PH.25KW6P TECA PH.37KW6P TECA PH.37KW6P TECA PH.55KW6P TECA APL Speed Eff. Current Power Factor Tmax/Tn Tst/Tn Ist/In Noise Weight Part No (r/min) (%) (A) (Cos Φ) (Times) (Times) (Times) db(a) (Kg) 3PH.09KW6P PH.12KW6P PH.18KW6P PH.25KW6P PH.37KW6P PH.37KW6P PH.55KW6P Pole APL TEC Power Frame Current (A) Current (A) Current (A) Part No Part No (KW) Size 220V 380V 660V 230V 400V 690V 240V 415V 720V 3PH.06KW4P TECA PH.09KW4P TECA PH.12KW4P TECA PH.18KW4P TECA PH.25KW4P TECA 90S S PH.25KW4P TECA 90L L APL Speed Eff. Current Power Factor Tmax/Tn Tst/Tn Ist/In Noise Weight Part No (r/min) (%) (A) (Cos Φ) (Times) (Times) (Times) db(a) (Kg) 3PH.06KW4P PH.09KW4P PH.12KW4P PH.18KW4P PH.25KW4P PH.25KW4P G14

17 3 Phase Electric Motors - IEC 2 - Technical Data 2 Pole APL TEC Power Frame Speed Eff. Current Power Factor Tmax/Tn Tst/Tn Ist/In Part No Part No (KW) Size (r/min) (%) (A) (Cos Φ) (Times) (Times) (Times) 3PH.75KW2P TECA PH1.1KW2P TECA PH1.5KW2P TECA-2 90S S PH2.2KW2P TECA-2 90L L PH3KW2P TECA-2 100L L PH4KW2P TECA-2 112M M PH5.5KW2P TECA-2 132S S PH7.5KW2P TECA-2 132S S PH11KW2P TECA-2 160M M PH15KW2P TECA-2 160M M PH18.5KW2P TECA-2 160L L PH22KW2P TECA-2 180M M PH30KW2P TECA-2 200L L PH37KW2P TECA-2 200L L Pole APL TEC Power Frame Speed Eff. Current Power Factor Tmax/Tn Tst/Tn Ist/In Part No Part No (KW) Size (r/min) (%) (A) (Cos Φ) (Times) (Times) (Times) 3PH.75KW4P TECA PH1.1KW4P TECA-2 90S S PH1.5KW4P TECA-2 90L L PH2.2KW4P TECA-2 100L L PH3KW4P TECA-2 100L L PH4KW4P TECA-2 112M M PH5.5KW4P TECA-2 132S S PH7.5KW4P TECA-2 132M M PH11KW4P TECA-2 160M M PH15KW4P TECA-2 160L L PH18.5KW4P TECA-2 180M M PH22KW4P TECA-2 180L L PH30KW4P TECA-2 200L L Pole APL TEC Power Frame Speed Eff. Current Power Factor Tmax/Tn Tst/Tn Ist/In Part No Part No (KW) Size (r/min) (%) (A) (Cos Φ) (Times) (Times) (Times) 3PH.75KW6P TECA-2 90S S PH1.1KW6P TECA-2 90L L PH1.5KW6P TECA-2 100L L PH2.2KW6P TECA-2 112M M PH3KW6P TECA-2 132S S PH4KW6P TECA-2 132M M PH5.5KW6P TECA-2 132M M PH7.5KW6P TECA-2 160M M PH11KW6P TECA-2 160L L PH15KW6P TECA-2 180L L PH18.5KW6P TECA-2 200L L PH22KW6P TECA-2 200L L G15

Single Phase Electric Motors - Cap Start Cap Run - Frame Sizes B3 B14 B5 Mounting Dimensions Frame Size IM B14 A B C D E F G H K M N P R S T 63 100 80 40 11 23 4 8.

5 80 10X13 100 80 120 0 M6 3 90S 140 100 56 24 50 8 20 90 10X13 115 95 140 0 M8 3 90L 140 125 56 24 50 8 20 90 10X13 115 95 140 0 M8 3 100L 160 140 63 28 60 8 24 100

5 Mounting Dimensions Shaft End Screw Overall Dimensions Frame Size IM B5 Dimensions M N P R S T AA AC AD HD L SS XX ZZ 63 115 95 140 0 φ10 3 120 130 179 116 212 M4 10 15

18 Single Phase Electric Motors - Cap Start Cap Run - Frame Sizes B3 B14 B5 Mounting Dimensions Frame Size IM B14 A B C D E F G H K M N P R S T X M X M X M6 3 90S X M8 3 90L X M L X M M X M8 3.5 Mounting Dimensions Shaft End Screw Overall Dimensions Frame Size IM B5 Dimensions M N P R S T AA AC AD HD L SS XX ZZ φ M φ M φ M S φ M L φ M L φ /416 M M φ M G16

19 Single Phase Electric Motors - Cap Start Cap Run - Technical Data At 110V / 50Hz 2 Pole APL TEC Power Frame Current Speed Eff Power Rate Part No Part No (KW) Size (A) (r/min) (%) Factor (Cosö) Torque (N.M) 1PH.18KW2PCCT1 TCC PH.25KW2PCCT1 TCC PH.37KW2PCCT1 TCC PH.55KW2PCCT1 TCC PH.75KW2PCCT1 TCC PH1.1KW2PCCT1 TCC PH1.5KW2PCCT1 TCC90S S PH2.2.KW2PCCT1 TCC90L L PH3KW2PCCT1 TCC100L L APL Tst/Tn Tmax/Tn Starting Run Capacitor Start Capacitor Noise db Weight Part No (Times) (Times) Current (A) (μf/v) (μf/v) (A) (Kg) 1PH.18KW2PCCT μF/250V μF/125V 4.2 1PH.25KW2PCCT μF/250V μF/125V 4.7 1PH.37KW2PCCT μF/250V μF/125V 5.3 1PH.55KW2PCCT μF/250V μF/125V 7.4 1PH.75KW2PCCT μF/250V μF/125V 9.5 1PH1.1KW2PCCT μF/250V μF/125V PH1.5KW2PCCT μF/250V μF/125V 14 1PH2.2.KW2PCCT μF/250V μF/125V 17 1PH3KW2PCCT μF/250V μF/125V 25 4 Pole APL TEC Power Frame Current Speed Eff Power Rate Part No Part No (KW) Size (A) (r/min) (%) Factor (Cosö) Torque (N.M) 1PH.12KW4PCCT1 TCC PH.18KW4PCCT1 TCC PH.25KW4PCCT1 TCC PH.37KW4PCCT1 TCC PH.55KW4PCCT1 TCC PH.75KW4PCCT1 TCC PH1.1KW4PCCT1 TCC90S S PH1.5KW4PCCT1 TCC90L L PH2.2KW4PCCT1 TCC100L L PH3KW4PCCT1 TCC100L L APL Tst/Tn Tmax/Tn Starting Run Capacitor Start Capacitor Noise db Weight Part No (Times) (Times) Current (A) (μf/v) (μf/v) (A) (Kg) 1PH.12KW4PCCT μF/250V μF/125V 4.1 1PH.18KW4PCCT μF/250V μF/125V 4.4 1PH.25KW4PCCT μF/250V μF/125V 5.9 1PH.37KW4PCCT μF/250V μF/125V 6.9 1PH.55KW4PCCT μF/250V μF/125V 9.6 1PH.75KW4PCCT μF/250V μF/125V PH1.1KW4PCCT μF/250V μF/125V PH1.5KW4PCCT μF/250V μF/125V PH2.2KW4PCCT μF/250V μF/125V 24 1PH3KW4PCCT μF/250V μF/125V 30 G17

20 Single Phase Electric Motors - Cap Start Cap Run - Technical Data At 230V / 50Hz 2 Pole APL TEC Power Frame Current Speed Eff Power Rate Part No Part No (KW) Size (A) (r/min) (%) Factor (Cosö) Torque (N.M) 1PH.18KW2PCCT1 TCC PH.25KW2PCCT1 TCC PH.37KW2PCCT1 TCC PH.55KW2PCCT1 TCC PH.75KW2PCCT1 TCC PH1.1KW2PCCT1 TCC PH1.5KW2PCCT1 TCC90S S PH2.2KW2PCCT1 TCC90L L PH3KW2PCCT1 TCC100L L PH3.7KW2PCCT1 TCC112M M PH4KW2PCCT1 TCC112M M APL Tst/Tn Tmax/Tn Starting Run Capacitor Start Capacitor Noise db Weight Part No (Times) (Times) Current (A) (μf/v) (μf/v) (A) (Kg) 1PH.18KW2PCCT μF/450V 70 30μF/250V 3.9 1PH.25KW2PCCT μF/450V 73 40μF/250V 4.4 1PH.37KW2PCCT μF/450V 75 75μF/250V 6.1 1PH.55KW2PCCT μF/450V μF/250V 7 1PH.75KW2PCCT μF/450V μF/250V 9 1PH1.1KW2PCCT μF/450V μF/250V PH1.5KW2PCCT μF/450F μF/300V PH2.2KW2PCCT μF/450V μF/300V PH3KW2PCCT μF/450V μF/300V 25 1PH3.7KW2PCCT μF/450V μF/300V 33 1PH4KW2PCCT μF/450V μF/300V 34.2 G18

21 Single Phase Electric Motors - Cap Start Cap Run - Technical Data At 230V / 50Hz 4 Pole APL TEC Power Frame Current Speed Eff Power Rate Part No Part No (KW) Size (A) (r/min) (%) Factor (Cosö) Torque (N.M) 1PH.12KW4PCCT1 TCC PH.18KW4PCCT1 TCC PH.25KW4PCCT1 TCC PH.37KW4PCCT1 TCC PH.55KW4PCCT1 TCC PH.75KW4PCCT1 TCC PH1.1KW4PCCT1 TCC90S S PH1.5KW4PCCT1 TCC90L L PH2.2KW4PCCT1 TCC100L L PH3KW4PCCT1 TCC100L L PH3.7KW4PCCT1 TCC112M M PH4KW4PCCT1 TCC112M M APL Tst/Tn Tmax/Tn Starting Run Capacitor Start Capacitor Noise db Weight Part No (Times) (Times) Current (A) (μf/v) (μf/v) (A) (Kg) 1PH.12KW4PCCT μF/450V 64 30μF/250V 4.1 1PH.18KW4PCCT μF/450V 64 40μF/250V 4.5 1PH.25KW4PCCT μF/450V 66 50μF/250V 5.9 1PH.37KW4PCCT μF/450V 68 75μF/250V 6.9 1PH.55KW4PCCT μF/450V μF/250V 9.6 1PH.75KW4PCCT μF/450V μF/250V PH1.1KW4PCCT μF/450V μF/250V PH1.5KW4PCCT μF/450V μF/300V PH2.2KW4PCCT μF/450V μF/300V PH3KW4PCCT μF/450V μF/300V PH3.7KW4PCCT μF/450V μF/300V 31 1PH4KW4PCCT μF/450V μF/300V 32.8 G19

Single Phase Electric Motors - Permanent Capacitor - Frame Sizes B3 B14 B5 Mounting Dimensions Frame

5 71 112 90 45 14 30 5 11 71 7X10 85 70 105 0 M6 2.5 80 125 100 50 19 40 6 15.

50 8 20 90 10X13 115 95 140 0 M8 3 100L 160 140 63 28 60 8 24 100 12X15 130 110 160 0 M8 3.

5 Mounting Dimensions Shaft End Screw Overall Dimensions Frame Size IM B5 Dimensions M N P R S T AA

5 132 145 194 123 255 M5 12 18 80 165 130 200 0 12 3.

22 Single Phase Electric Motors - Permanent Capacitor - Frame Sizes B3 B14 B5 Mounting Dimensions Frame Size IM B14 A B C D E F G H K M N P R S T X M X M X M6 3 90S X M8 3 90L X M L X M M X M8 3.5 Mounting Dimensions Shaft End Screw Overall Dimensions Frame Size IM B5 Dimensions M N P R S T AA AC AD HD L SS XX ZZ M M M S M L M L /416 M M M G20

23 Single Phase Electric Motors - Permanent Capacitor - Technical Data At 230V / 50Hz 2 Pole APL TEC Power Frame Current Speed Eff Power Part No Part No (KW) Size (A) (r/min) (%) Factor (Cosö) 1PH.09KW2PPCT1 TPC PH.12KW2PPCT1 TPC PH.18KW2PPCT1 TPC PH.25KW2PPCT1 TPC PH.37KW2PPCT1 TPC PH.55KW2PPCT1 TPC PH.75KW2PPCT1 TPC PH1.1KW2PPCT1 TPC PH1.5KW2PPCT1 TPC PH1.5KW2PPCT1 TPC 90S S PH2.2KW2PPCT1 TPC 90L L PH3KW2PPCT1 TPC 100L L APL Tst/Tn Tmax/Tn Starting Run Capacitor Noise db Weight Part No (Times) (Times) Current (A) (μf/v) (A) (Kg) 1PH.09KW2PPCT μF/450V PH.12KW2PPCT μF/450V PH.18KW2PPCT μF/450V PH.25KW2PPCT μF/450V PH.37KW2PPCT μF/450V PH.55KW2PPCT μF/450V PH.75KW2PPCT μF/450V PH1.1KW2PPCT μF/450V PH1.5KW2PPCT μF/450V PH1.5KW2PPCT μF/450V PH2.2KW2PPCT μF/450V PH3KW2PPCT μF/450V G21

24 Single Phase Electric Motors - Permanent Capacitor - Technical Data At 230V / 50Hz 4 Pole APL TEC Power Frame Current Speed Eff Power Part No Part No (KW) Size (A) (r/min) (%) Factor (Cosö) 1PH.06KW4PPCT1 TPC PH.09KW4PPCT1 TPC PH.12KW4PPCT1 TPC PH.18KW4PPCT1 TPC PH.25KW4PPCT1 TPC PH.37KW4PPCT1 TPC PH.55KW4PPCT1 TPC PH.75KW4PPCT1 TPC PH1.1KW4PPCT1 TPC 90S S PH1.5KW4PPCT1 TPC 90L L PH2.2KW4PPCT1 TPC 100L L PH3KW4PPCT1 TPC 100L L APL Tst/Tn Tmax/Tn Starting Run Capacitor Noise db Weight Part No (Times) (Times) Current (A) (μf/v) (A) (Kg) 1PH.06KW4PPCT μF/450V PH.09KW4PPCT μF/451V PH.12KW4PPCT μF/452V PH.12KW4PPCT μF/453V PH.18KW4PPCT μF/450V PH.25KW4PPCT μF/450V PH.37KW4PPCT μF/450V PH.55KW4PPCT μF/450V PH.75KW4PPCT μF/450V PH1.1KW4PPCT μF/450V PH1.5KW4PPCT μF/450V PH2.2KW4PPCT μF/450V PH3KW4PPCT μF/450V G22

25 Single Phase Electric Motors - Permanent Capacitor - Technical Data At 230V / 50Hz 6 Pole APL TEC Power Frame Current Speed Eff Power Part No Part No (KW) Size (A) (r/min) (%) Factor (Cosö) 1PH.09KW6PPCT1 TPC PH.12KW6PPCT1 TPC PH.18KW6PPCT1 TPC PH.25KW6PPCT1 TPC PH.37KW6PPCT1 TPC PH.55KW6PPCT1 TPC PH.75KW6PPCT1 TPC 90S S PH1.1KW6PPCT1 TPC 90L L APL Tst/Tn Tmax/Tn Starting Run Capacitor Noise db Weight Part No (Times) (Times) Current (A) (μf/v) (A) (Kg) 1PH.06KW4PPCT μF/464V PH.09KW4PPCT μF/465V PH.12KW4PPCT μF/466V PH.12KW4PPCT μF/467V PH.18KW4PPCT μF/468V PH.25KW4PPCT μF/469V PH.37KW4PPCT μF/470V PH.55KW4PPCT μF/471V G23

26 Notes G24

27 Ashley Power Ltd Ashley Road Parkstone Poole Dorset, BH14 0AQ WORM GEAR UNIT CATALOGUE Tel: +44 (0) Fax: +44 (0) H1

28 Worm Gear Units H2

29 Worm Gear Unit Contents Gearbox Dimensions... H4 Gearbox Performance... H5 Gearbox Technical Specifications... H6 Gearbox Combination Dimensions... H7 Gearbox Combination Performance... H8 Torque Arms, Single & Double Output Shaft Kits... H9 Please note: At Ashley Power we take care to ensure that all information is correct at time of printing however some errors and omissions excepted. H3

30 CHM - CHMR - CHME - CHMRE DIMENSIONS Unit D N B A F d (j6) G H R1 R R2 R3 L I C I1 Type (H7) (h8) E1 P Q Unit Type S T U V Z W P1 dº b b1 f t t M6x11(n.4) 0º M6x8(n.4) 45º M8x10(n.4) 45º 8 5 M M8x14(n.4) 45º 8 6 M M8x14(n.4) 45º 8 8 M M10x18(n.4) 45º 10 8 M M10x18(n.4) 45º 12 8 M M12x21(n.4) 45º 14 8 M Weight in kg. excluding motor If a dimension is critical to your application please contact our sales department for confirmation. Please note : errors and omissions excepted. H4

31 CHM PERFORMANCE WITH 4-POLE MOTORS 1400 REVS. INPUT CHM 30 CHM 063 CHM 110 i=ratio n2 r/min Kw=p1 Nm=T2 f.s. i=ratio n2 r/min Kw=p1 Nm=T2 f.s. i=ratio n2 r/min Kw=p1 Nm=T2 f.s CHM 040 CHM 075 CHM 130 i=ratio n2 r/min Kw=p1 Nm=T2 f.s. i=ratio n2 r/min Kw=p1 Nm=T2 f.s. i=ratio n2 r/min Kw=p1 Nm=T2 f.s * * * * CHM 050 CHM 090 i=ratio n2 r/min Kw=p1 Nm=T2 f.s. i=ratio n2 r/min Kw=p1 Nm=T2 f.s * SIZE 71 MOTORS If a dimension is critical to your application please contact our sales department for confirmation. Please note : errors and omissions excepted. H5

32 Gearbox Technical Specifications Unit Motor Frame Flange Dimensions Speed Ratio from 7.5:1 to 100:1 Size C I E 7, D Input Motor Shaft Sizes (mm) CHM B CHM B B B B B5 CHM B B B B B5 CHM B B B B CHM B5 80B B14 80B B B /112B B /112B14 CHM B B B B CHM 090 CHM 110 CHM /112B5 90B /112B14 90B B B B /112B /112B B B B /112B /112B B If a dimension is critical to your application please contact our sales department for confirmation. Please note : errors and omissions excepted H6

33 DIMENSIONS OF COMBINED GEARS CHM-CHM/CHMR-CHM CHM-CHM B A F C1 D(H7) d(j6) G H R1 R R2 L L1 I 030/ / / / / / / CHM-CHM I1 C I2 N(H8) E1 E2 P Q S T T1 U V Z 030/ / / / / / / CHM-CHM Y W P1 a b b1 f t t1 030/ M6x8(n.4) 45º / M8x10(n.4) 45º / M8x14(n.8) 45º / M8x14(n.8) 45º / M10x18(n.8) 45º / M10x18(n.8) 45º 12 5 M / M12x21(n.4) 45º 14 6 M Weight in kg excluding motor If a dimension is critical to your application please contact our sales department for confirmation. Please note : errors and omissions excepted. H7

34 CHM/CHM PERFORMANCE WITH 4 POLE MOTORS 1400 REVS. INPUT CHM 030/040 CHM 040/075 CHM 050/110 i=ratio n2 r/min Kw=P1 Nm=T2 i=ratio n2 r/min Kw=P1 Nm=T2 i=ratio n2 r/min Kw=P1 Nm=T * * * * * * * * * * * * * CHM 030/050 CHM 040/090 CHM 063/130 i=ratio n2 r/min Kw=P1 Nm=T2 i=ratio n2 r/min Kw=P1 Nm=T2 i=ratio n2 r/min Kw=P1 Nm=T * * * * * * * CHM 030/063 i=ratio n2 r/min Kw=P1 Nm=T N.B.the powers marked with * are higher than those that the gear allows, therefore the applicative choice must be made in accordance with the torque and not the power * * 216 The gear ratios are those most frequently requested. It is possible to obtain multiple combinations using the various ratios of the two single gears * * * 220 If a dimension is critical to your application please contact our sales department for confirmation. Please note : errors and omissions excepted. H8

TORQUE ARM TYPE I R F H ØE A B ØC Ød ØP Nº CHT MV 25* 70 15 17.5 14 8 33.5 118.5 55 7 45 4 CHT MV 30* 85 15 24 14 8 38 138 65 7 55 8 CHT MV 40 100 18 31.5 14 10 44 162 75 7 60 8 CHT MV 50 100 18 38.

35 TORQUE ARM TYPE I R F H ØE A B ØC Ød ØP Nº CHT MV 25* CHT MV 30* CHT MV CHT MV CHT MV CHT MV CHT MV CHT MV CHT MV 130/ * Without vibration resistant bushing The arm anchoring point of the torque arm is equipped with a vibration resistant bushing Weight per kit kg SINGLE OUTPUT SHAFT KIT TYPE A Ød CHT MVS CHT MVS CHT MVS CHT MVS CHT MVS CHT MVS CHT MVS CHT MVS CHT MVS B b t1 R L Weight per d2 kit kg M6x M6x M10x M10x M10x M12x M16x M16x DOUBLE OUTPUT SHAFT KIT TYPE A Ød B R b t1 L CHT MVD CHT MVD CHT MVD CHT MVD CHT MVD CHT MVD CHT MVD CHT MVD CHT MVD M10x22 M12x28 M16x35 Weight per kit kg M16x If a dimension is critical to your application please contact our sales department for confirmation. Please note : errors and omissions excepted. d2 - M6x16 M6x16 M10x22 M10x22 H9

36 Notes H10

37 Ashley Power Ltd Ashley Road Parkstone Poole Dorset, BH14 0AQ COUPLINGS & UNIVERSAL JOINT CATALOGUE Tel: +44 (0) Fax: +44 (0) J1

38 Couplings & Universal Joints J2

39 Couplings & Universal Joints Contents Couplings Chain Couplings...J4 Tyre Couplings...J5 Jaw Couplings...J6 HRC Couplings... J7 Nylon Sleeve Gear Couplings... J10 Universal Joints Single Joint Plain Bearings... J11 Single Joint Needle Bearings...J12 Single Joint Plain Bearings Long Unbored... J13 Double Joint Plain Bearings...J14 Double Joint Needle Bearings... J15 Double Joint Plain Bearings Long Unbored... J16 Protective Gaiters... J17 Please note: At Ashley Power we take care to ensure that all information is correct at time of printing however some errors and omissions excepted. J3

Chain Couplings Coupling Case Type Bore Size Min Max E L D H Weight kg A B Weight kg LRC4012 11 22 80 36 35 61 0.8 75 75 0.3 LRC4016 15 30 80 36 50 77 1.

2 142 106 1 LRC6022 25 75 120 54 110 152 9.8 167 106 1.2 LRC8018 30 78 150 67 115 170 13.9 186 130 2.3 LRC8022 35 95 150 67 140 202 20.2 220 130 2.

40 Chain Couplings Coupling Case Type Bore Size Min Max E L D H Weight kg A B Weight kg LRC LRC LRC LRC LRC LRC LRC LRC All dimensions in mm unless specified If a dimension is critical to your application please contact our sales department for confirmation. Please note : errors and omissions excepted. J4

Taper Bore Tyre Couplings Industry Standard Rubber Tyre Couplings with Taper Bore Hubs Type F Type H Type F Type H Sizes 40-60 Sizes 70-160 Taper Hub Flanges Tyres Size Bush Max Bore Types F & H Wt

39 4500 0.2 F50F 1210 32 1 1/4 38 25 38 133 100 79 - - 12.5 1.2 F50 0.56 4500 0.3 F50H 1210 32 1 1/4 38 25 38 133 100 79 - - 12.5 1.2 F60 1.11 4000 0.5 F60F 1610 42 1 5/8 42 25 38 165 125 103 - - 16.

41 Taper Bore Tyre Couplings Industry Standard Rubber Tyre Couplings with Taper Bore Hubs Type F Type H Type F Type H Sizes Sizes Taper Hub Flanges Tyres Size Bush Max Bore Types F & H Wt Size Power kw Max. Speed Wt. A C D F G M No. Metric Inch L E J kg / 100 rpm (rpm) kg F40F F F40H F F50F / F F50H / F F60F / F F60H / F F70F F F70H / F F80F / F F80H F F90F / F F90H / F F100F F F100H / F110F F110H F120F F120H F140F F140H F160F / F160H / All dimensions in mm unless specified If a dimension is critical to your application please contact our sales department for confirmation. Please note : errors and omissions excepted. J5

Parallel Bore Flexible Shaft Couplings JAW Type Code Min Bore Max Bore A B* C D Weight kg. Rubber Insert Hytrel Insert Weight kg. L050-S 6.35 15 27.4 43.7 11.9 15.9 0.22 yes yes 0.02 L070-S 6.

7 30.2 64.3 73 19.1 27 0.61 yes yes 0.15 L100-S 12.7 35 64.3 89 19.1 34.9 0.81 yes yes 0.15 L110-S 15.9 41.3 84.2 108 22.2 42.9 1.71 yes yes 0.3 L150-S 15.9 47.6 95 114.5 25.4 44.5 2.28 yes yes 0.

42 Parallel Bore Flexible Shaft Couplings JAW Type Code Min Bore Max Bore A B* C D Weight kg. Rubber Insert Hytrel Insert Weight kg. L050-S yes yes 0.02 L070-S yes yes 0.03 L075-S yes yes 0.07 L090-S yes yes 0.1 L095-S yes yes 0.1 L099-S yes yes 0.15 L100-S yes yes 0.15 L110-S yes yes 0.3 L150-S yes yes 0.63 All dimensions in mm unless specified *Approximate overall length Rubber, Hythrel and Urethane inserts available If a dimension is critical to your application please contact our sales department for confirmation. Please note : errors and omissions excepted. J6

Parallel Bore Flexible Shaft Couplings HRC Type Size of Coupling Min Bore Max Bore D dn a h C L1 L2* HRC70B 10 32 69 55 21 25 31 25 68 HRC90B 10 38 85 60 20 34 32 31 91 HRC110B 10 48 112 80 19 44 45

43 Parallel Bore Flexible Shaft Couplings HRC Type Size of Coupling Min Bore Max Bore D dn a h C L1 L2* HRC70B HRC90B HRC110B HRC130B HRC150B HRC180B HRC230B HRC280B *Approximate overall length Taper Bore Flexible Shaft Couplings HRC Type Size of Coupling Bush Ref. Bore Min Bore Max D dn a h C L1 L2 HRC HRC HRC HRC HRC HRC HRC HRC *Approximate overall length **H = Flange for external bush assembly ***F = Flange for internal bush assembly All dimensions in mm unless specified If a dimension is critical to your application please contact our sales department for confirmation. Please note : errors and omissions excepted. J7

44 Flexible Shaft Couplings Technical Data Technical Data Size of Bush Torque Max. Moment of Inertia** Weight of Coupling** Coupling Size Speed* Nominal Max. Bush Type Std. Type Bush Type Std. Type Type No. Nm Nm rpm kgm 2 kgm 2 k.g k.g HRC HRC HRC HRC HRC HRC HRC HRC *At speeds exceeding allowable maximum speed, please consult our technical department. ** Including bush with a medium bore. Size of Coupling Axial Misalignment Radial Misalignment Angular Misalignment Permissable Misalignment Tolerances in mm Coupling Selection Procedure 1. Select service factor (Table 1). 2. Nominal power multiplied by service factor equals temporary designed power K. 3. Designed power K should then be multiplied by factor L (Table 2) and S (Table 3). K x L x S gives the design power which is used for coupling selection in Table Check from dimensional tables that chosen coupling has room to be mounted. Type of Load Service Factors (Table 1) Driven Electric motors, Light Turbines Driver Internal Combustion Engine >=4 cylinders Internal Combustion Engine 1-3 cylinders Uniform No Vibration Moderate No Vibration Substantial Vibrations Heavy Shocks & Vibration Agitators, conveyors, centrifugal pumps and compressors, centrifugal fans, generators and machine tools Agitators, conveyors, hoisting equipment, bucket elevators, textile machines, mixers, printing machinery, sawmill machinery, rotary pumps 1.4 Hoisting equipment, calendars, crushers, dredgers, revolving furnaces, print presses, cutting presses, rotary compressors Crushers, extruders, rubber mixers, reciprocating pumps and conveyors, reciprocating compressors, vibrating screens J8

Flexible Shaft Couplings Technical Data Operating Hours Factor Starting Frequency (Table 2) Factor (Table 3) > - 2 8 16 > - 1 30 60 <= 2 8 16 - <= 1 30 60 - L 0.9 1 1.1 1.2 S 1 1.2 1.3 1.

45 Flexible Shaft Couplings Technical Data Operating Hours Factor Starting Frequency (Table 2) Factor (Table 3) > > <= <= L S Size of Coupling rpm KW Dynamic Balance Required If a dimension is critical to your application please contact our sales department for confirmation. Please note : errors and omissions excepted. J9

46 Nylon Sleeve Gear Couplings Industry Standard Coupling Nominal Max. Standard Hubs Long Hubs Number Tooth Tooth Type Bore (3) Bore B C ø D E ø F G (1) M (1) L (2) S (2) of Teeth O/D mm Length mm GF GF GF GF GF GF GF GF GF GF All dimensions in mm unless specified (1) Assembled length. (2) Coupling hub length to fully fit standard shafts of UNEL-MEC range of motors. (3) Finished bores to H7 tolerance and keyways on request. If a dimension is critical to your application please contact our sales department for confirmation. Please note : errors and omissions excepted. J10

Single Joint Plain Bearings Type UJSP in Steel UJSP Properties Maximum working angle 45 degrees Maximum speed 1000 rpm Maximum power 6kW Maximum torque 600 Nm Higher power and torques are available

47 Single Joint Plain Bearings Type UJSP in Steel UJSP Properties Maximum working angle 45 degrees Maximum speed 1000 rpm Maximum power 6kW Maximum torque 600 Nm Higher power and torques are available using larger diameter or needle roller bearing joints : please enquire NB : It is recommended that all plain bearing joints should be used with a protective gaiter to assist lubrication and help arrest the ingress of dirt. Further bore types as below available on request Stock No Bore d Diameter Overall Pivot centre Hub length Weight Gaiter H7 D length L2 L1 C KG type UJSP16X UJG01M16 UJSP16X UJG01M16 UJSP22X UJG03M22 UJSP25X UJG04M25 UJSP28X UJG05M28 UJSP32X UJG1M32 UJSP36X UJG2M36 UJSP42X UJG3M42 UJSP45X UJG4M45 UJSP50X UJG5M50 For further sizes please enquire All dimensions in mm unless specified If a dimension is critical to your application please contact our sales department for confirmation. Please note : errors and omissions excepted. J11

Single Joint Needle Roller Bearings Type UJSN in Steel UJSN Properties Maximum working angle 45 degrees Maximum speed 4000 rpm Maximum power 40kW Maximum torque 200 Nm Higher power and torques are

48 Single Joint Needle Roller Bearings Type UJSN in Steel UJSN Properties Maximum working angle 45 degrees Maximum speed 4000 rpm Maximum power 40kW Maximum torque 200 Nm Higher power and torques are available using larger diameter or needle roller bearing joints : please enquire NB: Protective gaiters are unnecessary for most applications Further bore types as below available on request Stock No Bore d Diameter Overall Pivot centre Hub length Weight H7 D length L2 L1 C KG UJSN22X UJSN25X UJSN28X UJSN32X UJSN36X UJSN42X UJSN45X UJSN50X For further sizes please enquire All dimensions in mm unless specified If a dimension is critical to your application please contact our sales department for confirmation. Please note : errors and omissions excepted. J12

Single Joint Plain Bearings UNBORED LONG Type UJSPL in Steel UJSPL Properties Maximum working angle 45 degrees Maximum speed 1000 rpm Maximum power 6kW Maximum torque 600 Nm Higher power and torques

49 Single Joint Plain Bearings UNBORED LONG Type UJSPL in Steel UJSPL Properties Maximum working angle 45 degrees Maximum speed 1000 rpm Maximum power 6kW Maximum torque 600 Nm Higher power and torques are available using larger diameter or needle roller bearing joints : please enquire NB : It is recommended that all plain bearing joints should be used with a protective gaiter to assist lubrication and help arrest the ingress of dirt. Further bore types as below available on request Stock No Bore Diameter Overall Pivot centre Hub length Weight Gaiter D length L2 L1 C KG type UJSPL16XSOL SOLID UJG01M16 UJSPL22XSOL SOLID UJG03M22 UJSPL25XSOL SOLID UJG04M25 UJSPL28XSOL SOLID UJG05M28 UJSPL32XSOL SOLID UJG1M32 UJSPL36XSOL SOLID UJG2M36 UJSPL42XSOL SOLID UJG3M42 UJSPL45XSOL SOLID UJG4M45 UJSPL50XSOL SOLID UJG5M50 UJSPL58XSOL SOLID UJG5M58 For further sizes please enquire All dimensions in mm unless specified If a dimension is critical to your application please contact our sales department for confirmation. Please note : errors and omissions excepted. J13

Double Joint Plain Bearings Type UJDP in Steel UJDP Properties Maximum working angle Maximum speed Maximum power Maximum torque 90 degrees 1000 rpm 6kW 600 Nm Higher power and torques are available

50 Double Joint Plain Bearings Type UJDP in Steel UJDP Properties Maximum working angle Maximum speed Maximum power Maximum torque 90 degrees 1000 rpm 6kW 600 Nm Higher power and torques are available using larger diameter or needle roller bearing joints : please enquire NB : It is recommended that all plain bearing joints should be used with a protective gaiter to assist lubrication and help arrest the ingress of dirt. Further bore types as below available on request Bore d Diameter Overall Pivot to Pivot to Hub length Weight Gaiter Stock No H7 D length L3 face centre pivot centre C KG type L1 L4 UJDP16X UJG01M16 UJDP16X UJG01M16 UJDP22X UJG03M22 UJDP25X UJG04M25 UJDP28X UJG05M28 UJDP32X UJG1M32 UJDP36X UJG2M36 UJDP42X UJG3M42 UJDP45X UJG4M45 UJDP50X UJG5M50 For further sizes please enquire All dimensions in mm unless specified If a dimension is critical to your application please contact our sales department for confirmation. Please note : errors and omissions excepted. J14

Double Joint Needle Roller Bearings Type UJDN in Steel UJDN Properties Maximum working angle 90 degrees Maximum speed 4000 rpm Maximum power 40kW Maximum torque 200 Nm Higher power and torques are

51 Double Joint Needle Roller Bearings Type UJDN in Steel UJDN Properties Maximum working angle 90 degrees Maximum speed 4000 rpm Maximum power 40kW Maximum torque 200 Nm Higher power and torques are available using larger diameter or needle roller bearing joints : please enquire NB: Protective gaiters are unnecessary for most applications Further bore types as below available on request Bore d Diameter Overall Pivot to Pivot to Hub length Weight Stock No H7 D length L3 face centre pivot centre C KG L1 L4 UJDN22X UJDN25X UJDN28X UJDN32X UJDN36X UJDN42X UJDN45X UJDN50X For further sizes please enquire All dimensions in mm unless specified If a dimension is critical to your application please contact our sales department for confirmation. Please note : errors and omissions excepted. J15

Double Joint Plain Bearings UNBORED LONG Type UJDPL in Steel UJDPL Properties Maximum working angle Maximum speed Maximum power Maximum torque 90 degrees 1000 rpm 6kW 600 Nm Higher power and torques

52 Double Joint Plain Bearings UNBORED LONG Type UJDPL in Steel UJDPL Properties Maximum working angle Maximum speed Maximum power Maximum torque 90 degrees 1000 rpm 6kW 600 Nm Higher power and torques are available using larger diameter or needle roller bearing joints : please enquire NB : It is recommended that all plain bearing joints should be used with a protective gaiter to assist lubrication and help arrest the ingress of dirt. Further bore types as below available on request Stock No Bore Diameter Overall Pivot Pivot to pivot Hub length centre centre length Weight Gaiter D L2 L1 L4 C KG type UJDPL16XSOL SOLID UJG01M16 UJDPL22XSOL SOLID UJG03M22 UJDPL25XSOL SOLID UJG04M25 UJDPL28XSOL SOLID UJG05M28 UJDPL32XSOL SOLID UJG1M32 UJDPL36XSOL SOLID UJG2M36 UJDPL42XSOL SOLID UJG3M42 UJDPL45XSOL SOLID UJG4M45 UJDPL50XSOL SOLID UJG5M50 UJDPL58XSOL SOLID UJG5M58 For further sizes please enquire All dimensions in mm unless specified If a dimension is critical to your application please contact our sales department for confirmation. Please note : errors and omissions excepted. J16

Protective Gaiters Type UJG in Polychloroprene Rubber Stock No Diameter A Length B Bore C Joint Outside Diameter UJG01M16 28 34 15 16 UJG02M18 32 40 16.5 18 UJG03M22 40 45 20.5 22 UJG04M25 48 50 24.

53 Protective Gaiters Type UJG in Polychloroprene Rubber Stock No Diameter A Length B Bore C Joint Outside Diameter UJG01M UJG02M UJG03M UJG04M UJG05M UJG1M UJG2M UJG3M UJG4M UJG5M For further sizes please enquire All dimensions in mm unless specified If a dimension is critical to your application please contact our sales department for confirmation. Please note : errors and omissions excepted. J17

M O T O R S. T E C Electric Motors Ltd.

M O T O R S. T E C Electric Motors Ltd. M O T O R S T E C Electric Motors Ltd. GENERAL INFORMATION THREE PHASE-TECA/TECC TYPES-IE1/IE SINGLE PHASE-TPC/TCC TYPES BRAKE MOTOR-TECA-BM TYPE THREE PHASE MOTORS ECOL-IE1/IE/IE3 TEC motors are designed