Quickie Ti Titanium IN THIS SECTION

Transcription

1 Quickie Ti Titanium IN THIS SECTION Frame Optional Rear Crosstube Anti-Tip Padded Swing Away Armrest Axle Assembly Camber Tube Reference Guide QR Big Button Axle (Spoke Wheels) Quad Release Axle Nut (Push Button) Ti Quick-release Axle with Nut Titanium Fixed Height Non-Folding Backrest Titanium Fixed Height Folding Backrest Aluminum Folding Height Adjustable Backrest Standard Back Upholstery (Fixed-Height w/o Push Handles) Standard Back Upholstery (Fixed-Height with Push Handles) Standard Back Upholstery (Height-Adjustable w/o Push Handles) Standard Back Upholstery (Height-Adjustable with Push Handles) Adjustable Back Upholstery Integral Push Handle Backrest Folding Push Handles(Non-Height Adjustable) Folding Push Handles(Height Adjustable) Bolt-On Push Handle Assembly Fork,Stem, and Caster Assembly Caster/Tire Assemblies Tubular Footrest Tubular Footrest with Cover Tubular Footrest with Flared Cover Replacement Footrest Information Platform Footrest Replacement Platform Footrest Information Seat Sling and Cushion Seat Sling and Cushion Rail Guide Wheel Lock (Push to Lock) Wheel Lock (Pull to Lock) High Mount Scissor Wheel Lock Spinergy Wheel Assembly (24-26 ) Sideguard and Sideguard w/fender Assembly Fabric Sideguard Plastic Sideguard

2 FRAME SERIAL NO. TAG QTIX RIVNUT M5, 3.3 GRIP SHCS M6 x 1 x 16mm TORX T /4" WASHER HI-COLLAR LOCK ZN PIN SPRING.063 x CLAMP FOOTBED 1 INCH BUSHING SPLIT 1.00 OD.051 WALL 2 1,2,8, *- TI FRAME ASSM STD * (REPLACEMENT FRAME) *NOTE: TO ORDER REPLACEMENT FRAME, CONTACT CUSTOMER SERVICE. REFER TO SERIAL NO. TAG ON ORIGINAL FRAME. OPTIONAL REAR CROSS TUBE QTI0X27 1* BHCS 1/4-28 x 1.63 UNRF-3A 2 1A** BHCS 1/4-28 x 1.75 UNRF-3A OPTIONAL REAR CROSS TUBE (13-18 ) WIDE *USE ITEM 1 FOR FIXED BACK MODELS. **USE ITEM 1A FOR FOLDING BACK MODELS. PAGE 1.1 JANUARY 2003 QUICKIE TI TITANIUM PARTS SUPPLEMENT

3 ANTI-TIP QTIXO WASHER, LOCK, M BHCS,M6 x 1 x 25MM,TORX,T ANTI-TIP HOUSING, FIXED, AXLE MOUNT SNAP BUTTON DUAL ONE SIDE , ANTI-TIP TUBE EXT REG BLACK (EA) /4" ANTI-RATTLE /4" SNAP BTTN SINGLE QU 1/4-28 NYLOCK NUT THIN ANTI-TIP WHEEL MM WASHER WAVE ANTI-TIP SLEEVE TUBE QU 1/4 AN WASHER FLAT THIN /4-28 x 2 G8 HEX C/S 1 6, ANTI-TIP SLV W/WHLS BLK (4H) A/T REG EXTND W/LNG SLV BLK (EA) , ANTI TIP ASSM (EA) QUICKIE TI TITANIUM PARTS SUPPLEMENT JANUARY 2003 PAGE 1.2

4 PADDED SWING-AWAY ARMREST Drawing shows right side QTI0X x.940 x.200 FOAM INSERT PLUG 1 3* BHCS,M6 x 1 x 45MM,TORX,T A** BHCS,M6 x 1 x 50MM,TORX,T /4 x 1 ROLL PIN ARMREST PLUG ID NY-LINER /4-28 x 1 1/2 G8 HEX C/S QU 1/4-28 NYLOCK NUT THIN PADDED ARM RECEIVER (EA) NUT, HEX, NYLOCK, M6 X 1 2 1,2,4,5, , PADDED ARMREST QTNT , PADDED ARMREST REC Ti, FIXED BACK (EA) 3A, PADDED ARMREST REC Ti, FOLDING BACK (EA) 3, PADDED ARMS REC TI FXD BK (PR) 3A, PADDED ARMS REC TI FLD BK (PR) *USE ITEM 3 FOR FIXED BACK MODELS. **USE ITEM 3A FOR FOLDING BACK MODELS. PAGE 1.3 JANUARY 2003 QUICKIE TI TITANIUM PARTS SUPPLEMENT

5 AXLE ASSEMBLY MGUIDE Ti01 QTI0X08 AXLE PLATE MEASURING GUIDE AXLE PLATE DIM A PART # SMALL RH 5 7/ SMALL LH 5 7/ MED RH 7 3/ MED LH 7 3/ LARGE RH 9 3/ LARGE LH 9 3/ BHCS,M6 x 1 x 40MM,TORX,T AXLE PLATE, COMPRESSION SLEEVE (EA) 2A AXLE PLATE, COMPRESSION SLEEVE, (EA) 2B AXLE PLATE, COMPRESSION SLEEVE, (EA) *NOTE: WHEN USING ANTI-TIPS SUBSTITUTE P/N IN COMPRESSION SLEEVE CLAMP LOWER HOLE LOCATIONS. SEE ANTI-TIPS PAGE 1.2 FOR PARTS SLEEVE, COMPRESSION CLAMP, COMPRESSION SLEEVE 4 * BHCS, M6 x 1 x 20mm, TORX, T-25 8,4* NUT, HEX, NYLOCK, M6 X WASHER, LOCK, M ASSEMBLY, CAMBER TUBE DIM A AXLGUIDE CAMBER TUBE REFERENCE GUIDE CAMBER WHEEL CHAIR WIDTH ANGLE CLEARANCE 13 WIDE 14 WIDE 15 WIDE 16 WIDE 17 WIDE 18 WIDE GAP DIM A PART # DIM A PART # DIM A PART # DIM A PART # DIM A PART # DIM A PART # DEG DEG DEG DEG QUICKIE TI TITANIUM PARTS SUPPLEMENT JANUARY 2003 PAGE 1.4

6 QR BIG BUTTON AXLE (SPOKE WHEELS) MEASURING GUIDE PART NUMBER A /16 MGUIDE Ti06 B 5 9/16 AX0X AXLE PIN AND NUT CLEAR LONG 1 QUAD-RELEASE AXLE NUT (PUSH-BUTTON) QTI0X QUAD RELEASE AXLE NUT 1 1, QR AXLE W/QUAD NUT PUSH BUTTON 1,2A QR AXLE TITANIUM W/QUAD NUT TITANIUM QUICK-RELEASE AXLE WITH NUT /8-18 NUT, NYLOCK, THIN 1 QTI0X19 1, QR AXLE W/NUT TITANIUM PAGE 1.5 JANUARY 2003 QUICKIE TI TITANIUM PARTS SUPPLEMENT

7 TITANIUM FIXED HEIGHT NON-FOLDING BACKREST QTI0X " MED CAP NUT, NYLOCK, M6 x SADDLE, SMALL, 1.00 TUBE,.25 HOLE 5 3A* SDLE SML 1.00 TUBE.25 HL PRTL PLUG, TUBE, 1.00 OD x.035 THK BRACKET, FIXED BACK, S,2S,3S (EA) WASHER, EXCCENTRIC, LARGE BHCS, M6 x 1 x 40 MM, TORX, T BHCS, M6 x 1 x 45MM, TORX, T CAP, 1.00, WLDMNT, BKRST, FXD, (13W, 7T-18W, 15T) BACK BRKT ASSM, FXD (PR) *NOTE: USE WHEN BRACKET BUTS UP AGAINST AXLEPLATE QUICKIE TI TITANIUM PARTS SUPPLEMENT JANUARY 2003 PAGE 1.6

8 TITANIUM FIXED HEIGHT FOLDING BACKREST QTi0X " MED CAP NUT, NYLOCK, M6 x SADDLE, SMALL, 1.00 TUBE,.25 HOLE 2 3A* SDLE SML 1.00 TUBE.25 HL PRTL PLUG, TUBE, 1.00 OD X.035 THK BACK RELEASE SPRING RIGID (EA) BACK RELEASE SADDLE RIGID Q1/GP BACK REL BRACKET (EA) BRACKET, FOLDING BACK, S,2S,3S (EA) *NOTE: USE WHEN BRACKET BUTS AGAINST AXLEPLATE WASHER, EXCCENTRIC, LARGE BHCS, M6 x 1 x 45 MM, TORX, T /4-28 x 1 3/4 BH C/S BLK ZN BHCS,M6 x 1 x 50MM,TORX,T /4-28 NYLOCK NUT THIN BACK RELEASE BUSHING RIGID /4" WASHER 1/4" HOLE BACK RELEASE STRAP LOCK RIGID BACK RELEASE STRAP 12-20" RIGID WLDMNT, BKRST, FXD, (13W, 7T-18W, 15T) CAP, 1.00, ,12, BACK BRKT ASSM, FLDG (PR) PAGE 1.7 JANUARY 2003 QUICKIE TI TITANIUM PARTS SUPPLEMENT

9 ALUMINUM FOLDING HEIGHT ADJUSTABLE BACKREST BACK FRAME SIZES A =REG SIZE 8 X X BACK FRAME SIZES A =TALL SIZE 12 X X QTi0X /4" CAP /4" INSERT PLUG BACK ADJ TUBE ONLY GP BACK ADJ TUBE ONLY GP BACK ADJ TUBE ONLY GP BACK ADJ TUBE ONLY GP Q2 FRAME/FOOT RETANING PLUG MM WASHER WAVE /4-20 x 3/4 BHCS NUT, NYLOCK, M6 X /4-28 NYLOCK NUT THIN SADDLE, SMALL, 1.00 TUBE,.25 HOLE 2 9A* SDLE SML 1.00 TUBE.25 HL PRTL CAP, 1.00, BACK RELEASE SPRING RIGID (EA) BACK RELEASE SADDLE RIGID Q1/GP BACK REL BRACKET (EA) BRACKET, FOLDING BACK, S,2S,3S (EA) WASHER, EXCCENTRIC, LARGE BHCS, M6 x 1 x 45 MM, TORX, T /4-28 x 1 3/4 BH C/S BLK ZN BHCS, M6 x 1 x 50MM, TORX, T BACK RELEASE BUSHING RIGID /4" WASHER 1/4" HOLE BACK FRAME REG, RGD, BLK " BACK FRAME, TALL, RGD, BLK, " BACK RELEASE STRAP LOCK RIGID BACK RELEASE STRAP 12-20" RIGID BACK ADJ TUBE RIGID THRU 16-20" 7,9,11-16, BACK BRKT ASSM, FLDG 18-20, (PR) *NOTE: USE WHEN BRACKET BUTS AGAINST AXLEPLATE QUICKIE TI TITANIUM PARTS SUPPLEMENT JANUARY 2003 PAGE 1.8

10 STANDARD BACK UPHOLSTERY (FIXED HEIGHT WITHOUT PUSH HANDLES) BK0X03A BACK UPH 13" 8-12" W/TAIL BACK UPH 14" 8-12" W/TAIL BACK UPH 15" 8-12" W/TAIL BACK UPH 16" 8-12" W/TAIL BACK UPH 17" 8-12" W/TAIL BACK UPH 18" 8-12" W/TAIL BACK UPH 13" 11-15" W/TAIL BACK UPH 14" 11-15" W/TAIL BACK UPH 15" 11-15" W/TAIL BACK UPH 16" 11-15" W/TAIL BACK UPH 17" 11-15" W/TAIL BACK UPH 18" 11-15" W/TAIL BACK UPH 13" 12-16" W/TAIL BACK UPH 14" 12-16" W/TAIL BACK UPH 15" 12-16" W/TAIL BACK UPH 16" 12-16" W/TAIL BACK UPH 17" 12-16" W/TAIL BACK UPH 18" 12-16" W/TAIL BACK UPH 13" 14-18" W/TAIL BACK UPH 14" 14-18" W/TAIL BACK UPH 15" 14-18" W/TAIL BACK UPH 16" 14-18" W/TAIL BACK UPH 17" 14-18" W/TAIL BACK UPH 18" 14-18" W/TAIL STANDARD BACK UPHOLSTERY (FIXED HEIGHT WITH PUSH HANDLES) QTI0X BCK UPH 13" 11-14/12-16 RGD BCK UPH 14" 11-14/12-16 RGD BCK UPH 15" 11-14/12-16 RGD BCK UPH 16" 11-14/12-16 RGD BCK UPH 17" 11-14/12-16 RGD BCK UPH 18" 11-14/12-16 RGD BCK UPH 13" WID, RGD BCK UPH 14" WID, RGD BCK UPH 15" WID, RGD BCK UPH 16" WID, RGD BCK UPH 17" WID, RGD BCK UPH 18" WID, RGD PAGE 1.9 JANUARY 2003 QUICKIE TI TITANIUM PARTS SUPPLEMENT

11 STANDARD BACK UPHOLSTERY(HEIGHT-ADJUSTABLE WITHOUT PUSH HANDLES) BK0X03A BACK UPH 13" 11-15" W/TAIL BACK UPH 14" 11-15" W/TAIL BACK UPH 15" 11-15" W/TAIL BACK UPH 16" 11-15" W/TAIL BACK UPH 17" 11-15" W/TAIL BACK UPH 18" 11-15" W/TAIL BACK UPH 13" 12-16" W/TAIL BACK UPH 14" 12-16" W/TAIL BACK UPH 15" 12-16" W/TAIL BACK UPH 16" 12-16" W/TAIL BACK UPH 17" 12-16" W/TAIL BACK UPH 18" 12-16" W/TAIL BACK UPH 13" 14-18" W/TAIL BACK UPH 14" 14-18" W/TAIL BACK UPH 15" 14-18" W/TAIL BACK UPH 16" 14-18" W/TAIL BACK UPH 17" 14-18" W/TAIL BACK UPH 18" 14-18" W/TAIL BACK UPH 13" 16-20" W/TAIL BACK UPH 14" 16-20" W/TAIL BACK UPH 15" 16-20" W/TAIL BACK UPH 16" 16-20" W/TAIL BACK UPH 17" 16-20" W/TAIL BACK UPH 18" 16-20" W/TAIL STANDARD BACK UPHOLSTERY(HEIGHT-ADJUSTABLE WITH PUSH HANDLES) QTI0x BCK UPH 13" 11-14/12-16 RDG BCK UPH 14" 11-14/12-16 RDG BCK UPH 15" 11-14/12-16 RDG BCK UPH 16" 11-14/12-16 RDG BCK UPH 17" 11-14/12-16 RDG BCK UPH 18" 11-14/12-16 RDG BCK UPH 13" RDG BCK UPH 14" RDG BCK UPH 15" RDG BCK UPH 16" RDG BCK UPH 17" RDG BCK UPH 18" RDG BACK UPH 13" RDG BACK UPH 14" RDG BACK UPH 15" RDG BACK UPH 16" RDG BACK UPH 17" RDG BACK UPH 18" RDG QUICKIE TI TITANIUM PARTS SUPPLEMENT JANUARY 2003 PAGE 1.10

12 ADJUSTABLE BACK UPHOLSTERY HEIGHT ADJUSTABLE BACK GUIDE BACK HEIGHT DESCRIPTION LOW MEDIUM MEDIUM TALL BK0X09 FIXED HEIGHT BACK GUIDE BACK HEIGHT DESCRIPTION 10 LOW 11 LOW 12 MED 13 MED 14 MED 15 MED ADJ BACK UPH 13" LOW ADJ BACK UPH 14" LOW ADJ BACK UPH 15" LOW ADJ BACK UPH 16" LOW 1, ADJ BACK UPH 17" LOW ADJ BACK UPH 18" LOW ADJ BACK UPH 13" MED ADJ BACK UPH 14" MED ADJ BACK UPH 15" MED ADJ BACK UPH 16" MED ADJ BACK UPH 17" MED ADJ BACK UPH 18" MED ADJ BACK UPH 13" TALL 1, ADJ BACK UPH 14" TALL ADJ BACK UPH 15" TALL ADJ BACK UPH 16" TALL ADJ BACK UPH 17" TALL ADJ BACK UPH 18" TALL PAGE 1.11 JANUARY 2003 QUICKIE TI TITANIUM PARTS SUPPLEMENT

13 INTEGRAL PUSH HANDLE BACKREST QTI0X /4-20 x 3/4 BH C/S mm WASHER WAVE QUICKIE GRIP 3/4" QU 3/4" INSERT PLUG /32 x 5/8 PAN HD PHIL x RIVNUT GOLD Q2 FRAME/FOOT RETAINING PLUG 1 3,4,6, HT ADJ STROLLER HANDLE W/GRIP , BACK ADJ PUSH HANDLE " FOLDING PUSH HANDLES(NON- HEIGHT ADJUSTABLE) QTI0X ADAPTER, FLDG PUSH HANDLE BHCS,M6 x 1 x 30mm,TORX,T-25,PATCH FOLDING PUSH HANDLE W/INST FXD HT (EA) FOLDING PUSH HANDLE ASSM, FXD HT (EA) QUICKIE TI TITANIUM PARTS SUPPLEMENT JANUARY 2003 PAGE 1.12

14 FOLDING PUSH HANDLES (HEIGHT ADJUSTABLE) QTI0X #12 x.75 PAN HEAD PHIL MM WASHER, WAVE BHCS, M6 x 1 x 20mm, TORX, T FOLDING PUSH HANDLE W/INSERT (11-14 THRU 16-20)(EA) FOLDING PUSH HANDLE ASSM (11-14 THRU 16-20)(EA) BOLT-ON PUSH HANDLE ASSEMBLY QTI0X QU 3/4 INSERT PLUG QUICKIE GRIP 3/ PUSH BACK RECEIVER TOP RIGID BLK PUSH BACK RECEIVER BOTTOM RIGID BLK /4-20 x 1 1/4 G8 HEX C/S /4-20 x 1 SET SCREW QU 1/4 AN WASHER FLAT 4 1,2, , PUSH HNDL TUBE W/F RIGID BLK (EA) PUSH HANDLE ASSM RIGID BLK (PR) PAGE 1.13 JANUARY 2003 QUICKIE TI TITANIUM PARTS SUPPLEMENT

15 FORK, STEM, AND CASTER ASSEMBLY MGUIDE Ti04 FORK MEASURING GUIDE FORK DIM A PART # SHORT 3 7/ TALL 4 3/ QTI0X BHCS M6 x 1 x 8mm TORX T-25, PATCH BHCS, M4 x.7 x 6mm, TORX, T CUP, SPLINE, ANGLE ADJ SPLINE, CASTER, ANGLE ADJ, UPPER SPLINE, CASTER, ANGLE ADJ, LOWER SLEEVE, PIVOT, ANGLE ADJ PIVOT, CASTER, ANGLE ADJ WASHER, LOCK, M SHCS, M12 x 1.75, ANGLE ADJ CAP, Q, 1.00, 30 DEG SPACER, BEARING AXLE, CASTER, 1.58 LG BHCS,M5x.8x8MM,TORX,T-25 PATCH WASHER, LOCK, M ASSY FORK INTEGRAL BEARINGS SHT ASSY FORK INTEGRAL BEARINGS TALL CASTER/TIRE ASSEMBLIES QTI0X PLASTIC W/LOW POLY AND BEARINGS /8 x 5/16 BEARINGS 2 2,3A MICRO CASTER LIGHTED MICRO CASTER ONLY (EA) 1 2,4A, MICRO CASTER LIGHTED MICRO CASTER LIGHTED (PR) BEARING SPACER MICRO CASTER W/BEARINGS (PR) 2, PLASTIC W/POLY AND BEARINGS QUICKIE TI TITANIUM PARTS SUPPLEMENT JANUARY 2003 PAGE 1.14

16 TUBULAR FOOTREST QTi0X02 MGUIDE Ti02 MGUIDE Ti03 FOOTREST REFERENCE GUIDE DIM A DESCRIPTION LEG STRAP 9 9W W W W W W W W W DIM B DESCRIPTION 5 7/16 SHORT 6 7/16 TALL WLDMNT FT HNGR FXD (70,80,85 ) FA 9W SHORT AND TALL 1A WLDMNT FT HNGR FXD 70 FA (10W-17W) SHORT 1B WLDMNT FT HNGR FXD 80 FA (10W-17W) SHORT 1C WLDMNT FT HNGR FXD 85 FA 1 (10W-17W) SHORT 1D WLDMNT FT HNGR FXD 70 FA (10W-17W) TALL 1E WLDMNT FT HNGR FXD 80 FA (10W-17W) TALL 1F WLDMNT FT HNGR FXD 85 FA (10W-17W) TALL LEG STRAP "-20" BLK PLEASE REFER TO REPLACEMENT FOOTREST INFORMATION ON PAGE 1.16 TUBULAR FOOTREST W/COVER QTI0X10 MGUIDE Ti02 MGUIDE Ti03 FOOTREST REFERENCE GUIDE DIM A DESCRIPTION LEG STRAP 9 9W W W W W W W W W DIM B DESCRIPTION 5 7/16 SHORT 6 7/16 TALL RIVET, POP, SSD53SSBS PLATE,FOOT HANGER, (9W - 17W) LEG STRAP "-20" BLK ASSM, PLT,FTRST W-17W 70 FA S 1A, ASSM, PLT,FTRST W-17W 80 FA S 1B, ASSM, PLT,FTRST W-17W 85 FA S 1C, ASSM, PLT,FTRST W-17W 70 FA T 1D, ASSM, PLT,FTRST W-17W 80 FA T 1E, ASSM, PLT,FTRST W-17W 85 FA T PLEASE REFER TO REPLACEMENT FOOTREST INFORMATION ON PAGE 1.16 PAGE 1.15 JANUARY 2003 QUICKIE TI TITANIUM PARTS SUPPLEMENT

17 TUBULAR FOOTREST W/FLARED COVER MGUIDE Ti02 FOOTREST REFERENCE GUIDE DIM A DESCRIPTION LEG STRAP 9 9W W W W W W W W W DIM B DESCRIPTION 5 7/16 SHORT 6 7/16 TALL RIVET, POP, SSD53SSBS PLATE, FOOT HANGER,FLARED (9W - 17W) LEG STRAP "-20" BLK ASSM PLT FTRST FLRD W-17W 70FA S 1A, ASSM PLT FTRST FLRD W-17W 80FA S QTI0X20 MGUIDE Ti03 1B, ASSM PLT FTRST FLRD W-17W 85FA S 1C, ASSM PLT FTRST FLRD W-17W 70FA T 1D, ASSM PLT FTRST FLRD W-17W 70FA T 1E, ASSM PLT FTRST FLRD W-17W 70FA T REPLACEMENT FOOTREST INFORMATION THE SERIAL NUMBER PROVIDES THE FOOTREST WIDTH. IF THE SERIAL NUMBER IS NOT AVAILABLE, USE THE INSET FORMULA (BELOW) TO CALCULATE. FOOTREST DESCRIPTION KEY THE FOOT REST MEASURMENT DIFFERS FROM SEAT WIDTH MEASUREMENT,SEE INSET FORMULA AT RIGHT. INSET FORMULA: 0 INSET: (SEAT WIDTH) - 1 = (FOOTREST WIDTH) 1 INSET: (SEAT WIDTH) - 3 = (FOOTREST WIDTH) 2 INSET: (SEAT WIDTH) - 5 = (FOOTREST WIDTH) ASSM, PLT,FTRST 12W 70 FA T FRAME ANGLE T OR S DENOTES SHORT OR TALL. IF THE FRONT SEAT HEIGHT IS 17 OR GREATER THE FOOTREST HEIGHT IS T (TALL). IF THE FRONT SEAT HEIGHT IS 16.5 OR LESS THE FOOTREST HEIGHT IS S (SHORT). QUICKIE TI TITANIUM PARTS SUPPLEMENT JANUARY 2003 PAGE 1.16

18 PLATFORM FOOTREST MGUIDE Ti FTRST TUBE W/INSRT, 9-17W PLATFORM FOOTPLATE CLAMP /4-28 AUTOMATION NUT /4-28 x 7/8 FH C/S 2 4A /4-20 x 1 FH C/S BLK 2 (2,4,6 SPACER) PLTFORM F/PLT " x 5 1/2"-14 x 5 1/2" QTi0x21 PLATFORM FOOTREST REFERENCE GUIDE DIM A DIM B ITEM 5 ITEM 1 LEG STRAP /4-20 x 1 HEX C/S LEG STRAP "-20" BLK ADAPTIVE FOOTREST SPACER 2 2 8A ADAPTIVE FOOTREST SPACER 4 2 8B ADAPTIVE FOOTREST SPACER PLATFORM FOOTREST ASSEMBLY REPLACEMENT PLATFORM FOOTREST INFORMATION THE SERIAL NUMBER PROVIDES THE FOOTREST WIDTH. IF THE SERIAL NUMBER IS NOT AVAILABLE, USE THE INSET FORMULA (BELOW) TO CALCULATE. PLATFORM FOOTREST DESCRIPTION KEY THE FOOT REST MEASURMENT DIFFERS FROM SEAT WIDTH MEASUREMENT,SEE INSET FORMULA TO RIGHT. INSET FORMULA: 0 INSET: (SEAT WIDTH) - 1 = (FOOTREST WIDTH) 1 INSET: (SEAT WIDTH) - 3 = (FOOTREST WIDTH) 2 INSET: (SEAT WIDTH) - 5 = (FOOTREST WIDTH) 9" W PLTFRM FTRST ASSM S T OR S DENOTES SHORT OR TALL. IF THE FRONT SEAT HEIGHT IS 17 OR GREATER THE FOOTREST HEIGHT IS T (TALL). IF THE FRONT SEAT HEIGHT IS 16.5 OR LESS THE FOOTREST HEIGHT IS S (SHORT). PAGE 1.17 JANUARY 2003 QUICKIE TI TITANIUM PARTS SUPPLEMENT

19 SEAT SLING AND CUSHION QTI0X SEAT SLING x x 19 1A SEAT SLING x x 19 1B SEAT SLING x x 19 1C SEAT SLING x x 19 1D SEAT SLING x x 19 1E SEAT SLING x x BHCS, M5 X.8X12MM,TORX,T SEAT RAIL A SEAT RAIL B SEAT RAIL C SEAT RAIL D SEAT RAIL E SEAT RAIL SEAT SLING VELCRO STRIP 2 2 5, SEAT CUSHION W/COVER AND FOAM x x 19 SEAT SLING - CUSHION - RAIL GUIDE DIMENSIONS SLING P/N CUSHION P/N RAIL PN 13 W x 14 D W x 15 D W x16 D W x17 D W x18 D W x 19 D W x 14 D W x 15 D W x 16 D W x 17 D W x 18 D W x 19 D W x 14 D W x 15 D W x 16 D W x 17 D W x 18 D W x 19 D DIMENSIONS SLING P/N CUSHION P/N RAIL PN 16 W x 14 D W x 15 D W x 16 D W x 17 D W x 18 D W x 19 D W x 14 D W x 15 D W x 16 D W x 17 D W x 18 D W x 19 D W x 14 D W x 15 D W x 16 D W x 17 D W x 18 D W x 19 D QUICKIE TI TITANIUM PARTS SUPPLEMENT JANUARY 2003 PAGE 1.18

20 WHEEL LOCK (PUSH-TO-LOCK) WHEEL LOCK CLAMP ASSEMBLY NUMBERS GAP CAMBER Drawing shows right side QTi0X QU HB PLASTIC COVER 1 1, , WHEEL LOCK ARM ASSM W/GRIP BLK (EA) ID.312 OD BUSHING PLST /4-28 x 1 BH C/S WHEEL LOCK SLIDE BLOCK 3 1/2" BLK QU 1/4-28 NYLOCK NUT THIN /4 NYLON WASHER /4-28 x 1 SOC C/S BLK CLAMP 1 1/4" RECESS HALF BLK CLAMP 1 1/4" THREADED BLK /4 WASHER HI COLLAR LOCK ZN /4-28 x 7/8 SOC C/S WHL LCK CLMP THRU 3.5" WHL LCK CLMP THRD 3.5" WHL LCK/1AD CLMP ASSM BLK WHEEL LOCK CLAMP ASSM LONG , WHEEL LOCK PUSH ASSM W/O CLAMP BLK (EA) , WHEEL LOCK PUSH W/CLAMP BLK WHL LOCK PUSH W/CLAMP BLK (PR) 1-7, WHEEL LOCK PUSH ASSM WITH LONG CLAMP WHL LOCK PUSH W/LNG CLAMP (PR) PAGE 1.19 JANUARY 2003 QUICKIE TI TITANIUM PARTS SUPPLEMENT

21 WHEEL LOCK (PULL-TO-LOCK) WHEEL LOCK CLAMP ASSM NUMBERS GAP CAMBER QU HB PLASTIC COVER 1 1, , WHLLCK ARM ASM R PLL W/GRIP BLK (EA) ID.312 OD BUSHING PLST /4-28 x 1 BH C/S WHEEL LOCK SLIDE BLOCK 3 1/2" BLK QU 1/4-28 NYLOCK NUT THIN /4 NYLON WASHER /4-28 x 1 SOC C/S BLK CLAMP 1 1/4" RECESS HALF BLK CLAMP 1 1/4" THREADED BLK /4 WASHER HI COLLAR LOCK ZN /4-28 x 7/8 SOC C/S 2 Drawing shows right side QTi0X WHL LCK CLMP THRU 3.5" WHL LCK CLMP THRD 3.5" WHL LCK/1AD CLMP ASSM BLK WHEEL LOCK CLAMP ASSM LONG , WHEEL LOCK PULL ASSM W/O CLAMP BLK (EA) , WHEEL LOCK PULL W/CLAMP BLK (EA) WHL LOCK PULL W/CLAMP BLK (PR) 1-7, WHL LOCK PULL W/LONG CLMP (EA) WHL LOCK PULL W/LNG CLAMP (PR) QUICKIE TI TITANIUM PARTS SUPPLEMENT JANUARY 2003 PAGE 1.20

22 HIGH-MOUNT SCISSOR WHEEL LOCK WHEEL LOCK CLAMP ASSM NUMBERS GAP CAMBER Drawing Shows Right Side QTi0X QU 1/4-28 NYLOCK NUT THIN WHL LCK SLIDE BLOCK 3 1/2 BLK /4-28 X 3/4 BH C/S HI-MNT SCISSOR WHL LCK ARM BLK /4 NYLON WASHER /4 SAE WASHER /4-28 X 1.10 BH C/S TOGGLE LINK ID.312 OD BUSHING PLST /4 X 1/4 ALUM SPACER BLK HI-MNT SCSSOR WHL LOCK ARM LNG /4-28 X 1 1/2 BH C/S /4-28 X 7/8 SOC C/S /4-28 X 1 SOC C/S BLK /4 WASHER HI COLLAR LOCK ZN WHL LCK CLMP THRU WHL LCK CLMP THRD CLAMP 1 1/4 THREADED BLK CLAMP 1 1/4 RECESS HALF BLK 1 14,15,18, WHL LCK/1AD CLMP ASSM BLK 13, WHEEL LOCK CLAMP ASSM LONG , WHL LCK ASSM SCSSR HI MT T (EA) PAGE 1.21 JANUARY 2003 QUICKIE TI TITANIUM PARTS SUPPLEMENT

23 SPINERGY WHEEL ASSEMBLY (540,559,590 mm) WHL_SPOXB " X 1" HI PRES CLNCHR TIRE 1 1A " X 1" HI PRES CLNCHR TIRE " TUBE PRESTA VALVE (540MM) 1 2A " TUBE PRESTA VALVE (590MM) " HR (6T) HTBB/BB PLST 1 4A QP 24" HR.065 (6)TAB ANO 1 4B " HR 6T PLST BB/TN 1 4C " HR 6T BB/TN HR TAB COVER BLK QU NYLOCK NUT X 1/2 PAN PHIL 6 1-3,4A, " SPNRGY STD W/PL HR YLW ,4, " SPNRGY STD W/HR YLW 540 1A,2A-3B, " SPNRGY STD W/PL HR YLW 590 4B,5-7 1A,2A,3B, " SPNRGY STD W/HR YLW 590 4C, ,3A, " SPNRGY STD W/HR BLK ,3A,4A, " SPNRGY STD W/PL BLK A,2A,3A, " SPNRGY STD W/HR BLK 590 3C,4C,5-7 1A,2A,3C, " SPNRGY STD W/PL BLK 590 4B,5-7 QUICKIE TI TITANIUM PARTS SUPPLEMENT JANUARY 2003 PAGE 1.22

24 SIDEGUARD AND SIDEGUARD W/FENDER ASSEMBLY QTI0X BHCS,M6 x 1 x 16MM,TORX,T WASHER, FLAT, M SPACER, SIDEGUARD BHCS,M6x1x8MM,TORX,T-25 PATCH SIDEGUARD W/FENDER ASSM (EA) 5A SIDEGUARD, PLATE, NO FENDER BHCS,M6 x 1 x 16MM,TORX,T PIVOT SIDEGUARD NUT, HEX, NYLOCK, M6 x CLAMP, C-CLIP, SIDEGUARD CLAMP, OUTBRD, SIDEGUARD CLAMP, INBRD, SIDEGUARD 1 6,10, SIDEGUARD CLAMP ASSM , SIDEGUARD W/FENDER 1-5, AND MNTG HARDWARE SIDEGUARD ASSM W/FENDER Ti (PR) 1-4,5A, PLASTIC SIDEGUARD (NO FENDER) 7-9 AND MNTG HARDWARE SIDEGUARD ASSM NO FENDER Ti (PR) PAGE 1.23 JANUARY 2003 QUICKIE TI TITANIUM PARTS SUPPLEMENT

25 FABRIC SIDE GUARD MEASURING GUIDE MGUIDE26 AC0X011 A B ADULT 17 7/8 15 KIDS /4 NOTE: VELCRO STRIPS ARE 2 WIDE. C / SIDE GUARD REG Q1 R 1 1A SIDE GUARD REG Q1 L 1 1B SIDE GUARD KIDS Q1 R 1 1C SIDE GUARD KIDS Q1 L 1 1D SIDE GUARDS KIDS NF (PR) 1 1E* SIDE GUARDS KIDS NF/REV (PR) 1 PLASTIC SIDE GUARD MEASURING GUIDE A ADULT 12 3/4 KIDS 11 1/2 MGUIDE27 B 8 5/8 6 1/2 NOTE: STANDARD (ADULT) SIDE GUARD FITS DEPTHS. KIDS SIDE GUARD FITS DEPTHS. Drawing shows right side AC0X PLASTIC SIDE GUARD KIDS R 1 1A PLASTIC SIDE GUARD KIDS L 1 1B PLASTIC SIDE GUARD STD R 1 1C PLASTIC SIDE GUARD STD L /4-28 x 1 3/8 HEX C/S QU 1/4 AN WASHER FLAT THIN CLMP P300 CHRGNG/ADJ FL KDS SIDE GUARD/KIDZ ARM REC 1 QUICKIE TI TITANIUM PARTS SUPPLEMENT JANUARY 2003 PAGE 1.24

26 PAGE 1.25 JANUARY 2003 QUICKIE TI TITANIUM PARTS SUPPLEMENT