Parts Catalog Issued: Apr 11, A-4 A-4 Titanium. (Wheelchairs Built After 9/15/02)

Transcription

1 Parts Catalog Issued: Apr, 208 A-4 A-4 Titanium (Wheelchairs Built After 9/5/02)

2 Parts Catalog Usage Guide The information contained in this document is subject to change without notice. This catalog contains service parts for Form No If you have any questions regarding this catalog, please contact one of our Customer Service Representatives. SYMBOL DEFINITION For Customer Service Support Call: For Faxed In Orders Call: or For Technical Service Call: Literature Can Be Found at: or Throughout this catalog you will notice letters to draw your attention to specific footnotes which are located at the bottom of the page or below specified charts. Examples: A,B,C etc. NOTE: NLA = Special Comments = General information pertaining to that specific page = No Longer Available HARDWARE MEASUREMENTS The measurements for the hardware will be listed as follows: Screws, Bolts Diameter X Thread Count/Pitch X Length Washers Inside Diameter X Outside Diameter X Thickness Spacers Inside Diameter X Outside Diameter X Length For your convenience, we have supplied an area for you to list your Invacare Representatives. Name Phone Numbers 208 Invacare Corporation. Elyria, Ohio. Invacare, Yes, you can., A-4, and the Medallion Design are registered trademarks of Invacare Corporation. KIK is a registered trademark of KIK Technology, Inc. Frog Legs is a registered trademark of Frog Legs, Inc. Natural Fit is a trademark of Three Rivers Out Front. Form No To order call toll free , or

3 TABLE of CONTENTS Description Page Number Accessories - Miscellaneous Arms - "T" Arm Arms - Half Arms Backrests and Hardware - w/ Fold Down Side Guards... 7 Backrests and Hardware - w/o Side Guards or Other Side Guards... 2 Canes - Back w/o Push Handles Canes - Back with Push Handles Casters - Front & Hardware (After 6/29/) Casters - Front & Mounting Hardware (Before 7//) Footplate - One Piece Adjustable Angle AT Footplate - Rigid Tubular Forks & Hardware Frame... 7 Frame Finishes and Touch-Up Paint... 4 Frames - Seat and Frame Hardware... 9 Guards - Side - Non-Removable Fold Down Guards - Side - Rigid Handles - Push - Bolt On Handles - Push - Quick Release Hardware - Suspension, Axles, Axle Tubes, and Camber Inserts... 3 Packaging - Literature and Decals Form No To order call toll free , or

4 TABLE of CONTENTS Description Page Number Upholstery - Back - Adjustable Tension Upholstery - Back - Slip On Upholstery - Seat... 3 Wheel Locks - Hideaway Undermount Wheel Locks - High Mount Pull to Lock Wheel Locks - High Mount Push to Lock Wheel Locks - Hill Holder... 7 Wheels - Handrims & Handrim Hardware - Natural Fit & Natural Fit LT Wheels - Rear - Composite Wheels - Rear - Handrim Hardware Wheels - Rear - Handrims Wheels - Rear - Spoke w/ Handrims Wheels - Rear - Spoke w/o Handrims Form No To order call toll free , or

5 Frame Finishes and Touch-Up Paint Contemporary Color Numbers Touch-Up Paint (.6 oz.) Color 22P NLA Anthracite 3P Bead Blast (Titanium Only) 5P 3337-NLA Black Prism 66P NLA Electric Purple 80P NLA Evergreen with Navy 0P 0325-NLA Jeweled Green 05P 0326-NLA Midnight Blue 33P NLA Red 83P NLA Royal Blue with Grape 60P 038-NLA Silver Metallic 7P Silver Vein 24P NLA Wet Black Too Hot Color Numbers Touch-Up Paint (.6 oz.) Color 9P NLA Bubblegum Pink 6P NLA Electric Red 8P NLA Fruit Fusion 20P NLA Grape Madness 6P NLA Sunkissed Orange 30P Sunny Yellow 7P NLA Tangerine Red Way Cool Color Numbers Touch-Up Paint (.6 oz.) Color 23P NLA Celestial Purple 22P NLA Cosmic Blue 62P NLA Electric Blue 79P 036-NLA Electric Teal 25P 3338-NLA Emerald Green 27P NLA Grasshopper Green 2P NLA Lolly Pop Blue 26P NLA Shamrock Green 24P NLA Vivid Violet Form No To order call toll free , or

6 Frame Finishes and Touch-Up Paint Sparkle Frame Finishes Color Number 88P Color Wet Black w/twilight Sparkle Form No To order call toll free , or

7 Packaging, Literature, and Decals When adjusting or replacing parts please refer to your Owner's Manual for assistance. Item Number Note Part Number Description Quantity Per Package Assembly 403X0 Carton, Front Riggings Bag, Poly NLA NLA - Insert, Bottom Pad 4 C NLA NLA - Carton, Shipper 4 D NLA NLA - Carton, Shipper A 600-NLA NLA - Decal, A-4 A 646-NLA NLA - Decal, A-4 Titanium A NLA NLA - Package, Invacare Logo Decal A,B,E 400-NLA NLA - Owner's Manual Kit, A-4 English A,E 486-NLA NLA - Owner's Manual, A-4 French Canadian NOTE: A - Not Shown B - Includes Owner's Manual and Warranty Card. C - Used for All chairs except those with Adj. Height Back Canes w/ Push Handles or those with 26" Wheels. D - Used for chairs with Adj. Height Back Canes w/ Push Handles or those with 26" Wheels. E - Item is no longer available from the Invacare Service Parts Department. Refer to the Invacare Website under "Product Literature Search". Enter the part number in the "Keywords" field and download a free PDF version copy. Form No To order call toll free , or

8 Frame Please call Customer Service when ordering replacement frames and frame hardware, these are special orders and must be ordered through Customer Service. Please refer to specials number C when ordering. Form No To order call toll free , or

9 Frame Please call Customer Service when ordering replacement frames and frame hardware, these are special orders and must be ordered through Customer Service. Please refer to specials number C when ordering. Item Number Note Part Number Description Quantity Per Package Assembly A,B Frame, A-4 Aluminum, Color A,B NL A NLA - Frame, A-4 Titanium, Color NOTE: A - See frame ordering requirements. B - Seat frame not included. See category titled, "Seat Frame and Frame Hardware." Form No To order call toll free , or

10 Seat Frame and Frame Hardware Form No To order call toll free , or

11 Seat Frame and Frame Hardware Item Number Note Part Number Description Quantity Per Package Assembly See Chart # Seat Frames 4-9" D - Aluminum See Chart # Seat Frames 4-9" D - Titanium See Chart # Seat Frames 20-22" D - Aluminum See Chart # Seat Frames 20-22" D - Titanium Washer, Flat (5/6 x 5/8 x /6") Screw, Socket Button Head (5/6-8 x 7/8") NLA NLA - Washer, Nylon (5/6 x 7/8 x /64") 4 5 A Plug Button, Black (") 2 5 B Plug Button, Black (") Locknut (5/6-8) X02 Bearing (/2" I.D. x -/8" O.D.) Clamp, Footrest Screw, Socket Set Cone Point (/4-20 x /2") Protector, Rear Frame 2 A Plug Button, Head Tube, Black 2 B 6007 Plug Button, Head Tube, Black 2 A,C,D 409 Hardware, Adjustable Frame B,C,D 6322 Hardware, Adjustable Frame NOTE: A - Aluminum Frame B - Titanium Frame C - Not Shown D - Includes items 2- # Aluminum Seat Frames 4-9" Deep Chair Width 4" Deep 5" Deep 6" Deep 7" Deep 8" Deep 2" " " " " " " " " " " Specify frame color when ordering. 9" Deep NL A NL A Form No To order call toll free , or

12 Seat Frame and Frame Hardware # Aluminum Seat Frames 20-22" Deep Chair Width 20" Deep 22" Deep 20" " " Specify frame color when ordering # Titanium Seat Frames 4-9" Deep Chair Width 4" Deep 5" Deep 6" Deep 7" Deep 8" Deep 2" " " " " " " " " " " Specify frame color when ordering. 9" Deep Form No To order call toll free , or

13 Seat Frame and Frame Hardware # Titanium Seat Frames 20-22" Deep Chair Width 20" Deep 22" Deep 20" " " Specify frame color when ordering Form No To order call toll free , or

14 Axles, Axle Tubes, Camber Inserts, and Suspension Hardware Form No To order call toll free , or

15 Axles, Axle Tubes, Camber Inserts, and Suspension Hardware Item Number Note Part Number Description Quantity Per Package Assembly A 4074 Hardware, Axle Tube Mounting, Quick Release B 4075 Hardware, Axle Tube Mounting, Nut and Bolt Screw, Socket Head (5/6-24 x 7/8") Washer, Flat (5/6 x 5/8 x /6") Clamp, Camber - Right Clamp, Camber - Left Ring, Toe-In/Toe-Out Adjusting 2 6 See Chart #6 Axle Tubes 7 See Chart #7 Single Setting Camber Inserts 7 See Chart #7 Dual Setting Camber Inserts NLA NLA - Screw, Thread Forming (M4 x 6mm) Pin, Quick Release Ring, Indexing Washer (/4 x /2 x /6") Screw, Allen Head (/4-28 x -/4") 2 3 D 2373-NLA NLA - Shock Absorbers w/ Bolt-On Hardware, Soft 2 Setting (Pair) 3 D 2374 Shock Absorbers w/ Bolt-On Hardware, Firm Setting 2 (Pair) 3 E 2398 Shock Absorbers w/ Quick Release Hardware, Soft 2 Setting (Pair) 3 E 2399 Shock Absorbers w/ Quick Release Hardware, Firm 2 Setting (Pair) Pin, Quick Release 2 G Kit, Quick Release Pin (Pkg. of 2) Spacer (/4 x 3/8 x 3/6") 2 6 C 65 Shock Absorber Assembly, Soft Setting (Pair) 2 6 C 650 Shock Absorber Assembly, Firm Setting (Pair) Axle, Quick Release w/ Locknut (/2" x 5") Axle, Quad Release w/ Clip 2 9 H 3049 Axle, Quick Release w/ Dome Button, Black 9 J Axle, Quick Release w/ Flat Button, Black G 2375-NLA NLA - Kit, Suspension Bolt-On, Soft Setting (Pair) 2 G 2376-NLA NLA - Kit, Suspension Bolt-On, Firm Setting (Pair) 2 NOTE: A - Includes items 2-5, and 8-0. B - Includes items 2-5, 8, and 0-2. C - Includes Attaching Hardware (4 ea. /4-20 x " Screws not sold separately) D - Includes items 0 and 6. E - Includes items 0, and 4-6. G - Not Shown. Includes 2 ea of items 4 (Q.R. Pin) and 5 (Spacer). H - Used on all Spoke wheels except Spinergy wheels J - Spinergy wheels only Form No To order call toll free , or

16 Axles, Axle Tubes, Camber Inserts, and Suspension Hardware #6 Axle Tubes Chair Width 2" 3" 4" 5" 6" 7" 8" NLA NLA NLA NLA Chair Width 9" " " 22" NLA NLA #7 Single Setting Camber Inserts Camber Angle Right Left 0 degrees degrees degrees degrees degrees Form No To order call toll free , or

17 Axles, Axle Tubes, Camber Inserts, and Suspension Hardware #7 Dual Setting Camber Inserts Camber Angle Dual Settings Right Left 0-3 degrees degrees degrees degrees degrees degrees degrees degrees degrees degrees Form No To order call toll free , or

18 Backrests and Hardware w/ Fold Down Side Guards Form No To order call toll free , or

19 Item Number Note Part Number Description Backrests and Hardware w/ Fold Down Side Guards Quantity Per Package Assembly A 4097 Kit, Fold Down Back Mounting Hardware with Side Guards Guard, Side, Folding, Black Bracket, Support Back, Black -Right Bracket, Support Back, Black -Left Bracket, Latch, Black Screw, Hex Head (/4-28 x 2") Latch, Torsion Spring - Right Latch, Torsion Spring - Left X020 Spacer, Coved (/4 x x 9/6") NLA NLA - Spacer, Nylon (/4 x x /4") Washer (/4 x /2 x /6") Locknut (/4-28) Washer (/4 x /2 x /32") Spacer (/4 x 3/8 x /32") Washer, Nylon (25/64 x 7/8 x /32") Spacer (/4 x 7/6 x 5/8") Cam, Adjustment NLA NLA - Pin, Roll (3/6 x 3/4") NLA NLA - Washer, Nylon (/4 x 3/4 x 5/8") Washer, Nylon (3/8 x 7/8 x /6") Cord, Nylon (6-/2 ft.) Screw, Set Socket (/4-20 x /4") 2 22 See Chart #22 - One Piece Backrest Frame 23 See Chart #23 - Upright Tube 2 24 See Chart #24 - Backrest Crossmember NOTE: A - Includes items #22 - One Piece Backrest Frame Chair Width 8-" High 0-4" High 2-6" High 4-8" High 6-20" High 2" NLA NLA NLA 0779-NLA NLA 3" NLA NLA NLA NLA NLA 4" NLA NLA NLA " NLA NLA " NLA " NLA 0269-NLA " NLA NLA " 0247-NLA NLA " NLA NLA " NLA " Form No To order call toll free , or

20 Backrests and Hardware w/ Fold Down Side Guards #23 - Upright Tube Back Height 8 - " High 0-4" High 2-6" High 4-8" High 5-9" High Part Number Form No To order call toll free , or

21 Backrests and Hardware w/ Fold Down Side Guards #24 - Backrest Crossmember Chair Width Part Number Chair Width Part Number 2" Wide " W " Wide " W " Wide " W " Wide " W NLA 6" Wide " W NLA 7" Wide Form No To order call toll free , or

22 Backrests and Hardware w/o Side Guards or Other Side Guards Form No To order call toll free , or

23 Item Number Note Part Number Description Backrests and Hardware w/o Side Guards or Other Side Guards Quantity Per Package Assembly A 4096 Kit, Fold Down Back Mounting Hardware Bracket, Support Back, Black -Right Bracket, Support Back, Black -Left Bracket, Latch, Black Cam, Adjustment X020 Spacer, Coved (/4 x x 9/6") NLA NLA - Spacer, Nylon (/4 x x /4") Screw, Hex Head (/4-28 x 2") NLA NLA - Pin, Roll (3/6 x 3/4") Washer (/4 x /2 x /32") Latch, Torsion Spring - Right Latch, Torsion Spring - Left Spacer (/4 x 3/8 x /32") Washer, Nylon (25/64 x 7/8 x /32") Washer (/4 x /2 x /6") Locknut (/4-28) Cord, Nylon (6-/2 ft.) Spacer (/4 x 7/6 x 5/8") Screw, Set Socket (/4-20 x /4") 2 8 See Chart #8 - One Piece Backrest Frame 9 See Chart #9 - Upright Tube 2 20 See Chart #20 - Backrest Crossmember NOTE: A - Includes items 2-6. #8 - One Piece Backrest Frame Chair Width 8-" High 0-4" High 2-6" High 4-8" High 6-20" High 2" NLA NLA NLA 0779-NLA NLA 3" NLA NLA NLA NLA NLA 4" NLA NLA NLA " NLA NLA " NLA " NLA 0269-NLA " NLA NLA " 0247-NLA NLA " NLA NLA " NLA " Form No To order call toll free , or

24 Backrests and Hardware w/o Side Guards or Other Side Guards #9 - Upright Tube Back Height 8 - " High 0-4" High 2-6" High 4-8" High 5-9" High Part Number Form No To order call toll free , or

25 Backrests and Hardware w/o Side Guards or Other Side Guards #20 - Backrest Crossmember Chair Width Part Number Chair Width Part Number 2" Wide " W " Wide " W " Wide " W " Wide " W NLA 6" Wide " W NLA 7" Wide Form No To order call toll free , or

26 Back Canes with Push Handles Form No To order call toll free , or

27 Item Number Note Part Number Description Back Canes with Push Handles Quantity Per Package Assembly Grip, Foam (8") Plug Button, Black (3/4") Locknut (/4-20) Screw, Socket Button Head (/4-20 x -/4") 5 A,E Cane, Back, Straight w/ Push Handle and Hardware (0-4" H) Grip, Foam (8") Plug Button, Black (3/4") NLA - Back Cane w/ Push Handle, Straight (0-4" H) Screw, Socket Button Head (/4-20 x -/4") Locknut (/4-20) 5 B,E Cane, Back, Straight w/ Push Handle and Hardware (2-6" H) Grip, Foam (8") Plug Button, Black (3/4") NLA - Back Cane w/ Push Handle, Straight (2-6" H) Screw, Socket Button Head (/4-20 x -/4") Locknut (/4-20) 5 C,E Cane, Back, Straight w/ Push Handle and Hardware (2-6" and 4-8" H) Grip, Foam (8") NLA - Cane, Back, Straight, Black - Right/Left Screw w/ Washer (#0 x 7/8") Screw, Socket Button Head (/4-20 x -/4") Locknut (/4-20) 5 D,E Back Cane w/ Hardware, Straight w/ Push Handle (4-8" and 6-20" H) NLA - Back Cane, Straight w/ Push Handle Grip, Foam (8") Screw, Socket Button Head (/4-20 x -/4") Locknut (/4-20) NOTE: A - 0-4" Back Height B - 2-6" Back Height C - 4-8" Back Height D " Back Height E - Includes items -4 Form No To order call toll free , or

28 Back Canes w/o Push Handles Item Number Note Part Number Description Quantity Per Package Assembly A,B Back Canes, Adjustable w/o Push Handle (8-" H) 2 Plug Button, Black (3/4") 2 3 NLA - Tube, Insert, Adjustable Back (8 - " H) 2 4 Spring, Torsion w/ Button 2 5 Bushing, Pivot 2 A,C Back Canes, Adjustable w/o Push Handle (0-4"/6-20" H) 2 Plug Button, Black (3/4") 2 3 NLA - Tube, Insert, Adjustable Back (0-20" H) 2 4 Spring, Torsion w/ Button 2 5 Bushing, Pivot 2 NOTE: A - Includes items 2-5. B - 8-" High Backs. C - 0-4", 2-6", 4-8", and 6-20" High Backs. Form No To order call toll free , or

29 Bolt On Push Handles Item Number Note Part Number Description Quantity Per Package Assembly Handle, Push, Black - Right Handle, Push, Black - Left Plug Button, Black (3/4") Grip, Foam, Black (5") Clamp, Threaded, Top NLA NLA - Screw, Set Flat Point (/4-20 x ") Clamp, Non-Threaded, Bottom Washer (/4 x /2 x /6") NLA NLA - Screw, Hex Head (/4-20 x ") 4 9 A Push Handle Assembly w/ Hardware, Bolt On (Pair) 2 NOTE: A - Includes items -8 Form No To order call toll free , or

30 Quick Release Push Handles Form No To order call toll free , or

31 Item Number Note Part Number Description Quick Release Push Handles Quantity Per Package Assembly A Handle, Push with Quick Release Pin, Black Washer (/4 x /2 x /6") Locknut (/4-20) Screw, Socket Button Head (/4-28 x -/2") Screw, Socket Button Head (/4-20 x -3/4") NLA NLA - Bracket, Push Handle, Black Grip, Foam (8") Pin, Quick Release with Lanyard X000 Rivet (3/6 x 7/6") Locknut (/4-28) 2 B 4098 Quick Release Push Handles (Pair) 2 NOTE: A - Includes items 7-9 B - Includes items -0 Form No To order call toll free , or

32 Seat Upholstery Seat Upholstery 4-9" Deep Chair Width 2" 3" 4" 5" 6" 7" 8" 9" 20" 2" 22" 4" Deep 5" Deep 6" Deep 7" Deep 8" Deep NLA NLA " Deep Form No To order call toll free , or

33 Seat Upholstery Seat Upholstery 20-22" Deep Chair Width 20" Deep 22" Deep 20" " " Item Number Note Part Number Description NOTE: Seat Upholstery Hardware Kits Quantity Per Package Assembly A,B Package, Phillips Head Screw (#0-32 x 3/4") 0 A,C Package, Phillips Head Screw (#0-32 x 3/4") 2 A,D Package, Phillips Head Screw (#0-32 x 3/4") 4 A,E Package, Phillips Head Screw (#0-32 x 3/4") 6 A,F Package, Phillips Head Screw (#0-32 x 3/4") 8 A See Chart Seat Upholstery 4-9" Deep A A - Not Shown See Chart Seat Upholstery 20-22" Deep B - Used for 4" Seat Depth. C - Used for 5-6" Seat Depth. D - Used for 7-8" Seat Depth. E - Used for 9-20" Seat Depth. F - Used for 22" Seat Depth. Form No To order call toll free , or

34 Slip On Back Upholstery Form No To order call toll free , or

35 Item Number Note Part Number Description NOTE: A A A A - Not Shown Slip On Back Upholstery Back Upholstery Hardware Kit Quantity Per Package Assembly Package, Screw with Washer (#0 x 7/8") (Pair) 2 See Chart Back Upholstery - chairs w/o Push Handle Back Canes See Chart Back Upholstery - chairs with Push Handle Back Canes Chairs without Push Handle Back Canes Chair Width 8-" High 0-4" High 2-6" High 4-8" High 6-20" High 2" NLA NLA NLA NLA NLA 3" NLA NLA NLA NLA NLA 4" NLA " NLA " " " " NLA " NLA " " Form No To order call toll free , or

36 Slip On Back Upholstery Chairs with Push Handle Back Canes Chair Width 0-4" High 2-6" High 4-8" High 6-20" High 2" NLA 6374-NLA 6374-NLA 6376-NLA 3" NLA 6375-NLA 6375-NLA 6377-NLA 4" NLA NLA NLA " NLA NLA NLA " NLA " " " " " 6372-NLA 6370-NLA 6370-NLA 6369-NLA 22" 6373-NLA 637-NLA 637-NLA 0832 Form No To order call toll free , or

37 Adjustable Tension Back Upholstery Back Assembly numbers are not available. Back components must be ordered individually. Item Number Note Part Number Description NOTE: Back Hardware Quantity Per Package Assembly A Package, Screw with Washer (#0 x 7/8") (Pair) 2 A,B NLA NLA - Instruction Sheet, Adjustable Tension Back Upholstery A See Chart Back Upholstery - Adjustable Tension A - Not Shown B - Item is no longer available from the Invacare Service Parts Department. Refer to the Invacare Website under "Product Literature Search". Enter the part number in the "Keywords" field and download a free PDF version copy. Form No To order call toll free , or

38 Adjustable Tension Back Upholstery Back Assembly numbers are not available. Back components must be ordered individually. Back Upholstery - Adjustable Tension Back Height Seat Width Back Anchor 8-" 2" " 3" " 4" " 5" " 6" " 7" " 8" " 9" " 20" " 2" " 22" " 2" " 3" " 4" " 5" " 6" " 7" " 8" " 9" " 20" " 2" " 22" " 2" " 3" " 4" " 5" " 6" " 7" " 8" " 9" " 20" " 2" " 22" " 2" " 3" " 4" " 5" " 6" " 7" " 8" " 9" Hook & Loop Adjuster NLA NLA NLA 4063-NLA NLA NLA NLA 4064-NLA NLA NLA Back Cover NLA NLA NLA NLA NLA NLA NLA Form No To order call toll free , or

39 Adjustable Tension Back Upholstery Back Assembly numbers are not available. Back components must be ordered individually. Back Upholstery - Adjustable Tension Back Height Seat Width Back Anchor Hook & Loop Adjuster Back Cover 4-8" 4-8" 4-8" 6-20" 6-20" 6-20" 6-20" 6-20" 6-20" 6-20" 6-20" 6-20" 6-20" 6-20" 20" 2" 22" 2" 3" 4" 5" 6" 7" 8" 9" 20" 2" 22" NLA NLA NLA NLA NLA NLA NLA Form No To order call toll free , or

40 Arms - "T" Arm and Hardware Form No To order call toll free , or

41 Item Number Note Part Number Description Arms - "T" Arm and Hardware Quantity Per Package Assembly A Kit, Arm Pad w/ Screws, Desk Length (Pair) 2 A Kit, Arm Pad w/ Screws, Full Length (Pair) Screw, Phillips Pan Head (#0-32 x -3/8") T-Arm Assembly w/ Plug Buttons, Desk Length, Low Range, Black T-Arm Assembly w/ Plug Buttons, Desk Length, High Range, Black T-Arm Assembly w/ Plug Buttons, Full Length, Low Range, Black T-Arm Assembly w/ Plug Buttons, Full Length, High Range, Black Plug Button, Black (7/8") Post, Arm, Low Range Post, Arm, High Range Kit, Clothing Guard, Low Range - Right Kit, Clothing Guard, Low Range - Left Kit, Clothing Guard, High Range - Right Kit, Clothing Guard, High Range - Left Guard, Clothing, Low Range Guard, Clothing, High Range Tube, Support, Low Range, Black - Right NLA NLA - Tube, Support, Low Range, Black - Left NLA NLA - Tube, Support, High Range, Black - Right Tube, Support, High Range, Black - Left Grip, Foam Locknut (#0-32) Lever, Locking Screw, Phillips Pan Head (#0-32 x /6") NLA NLA - Spring, Torsion Screw, Socket Button Head (/4-20 x /2") NLA NLA - Clamp, Clothing Guard - Right NLA NLA - Clamp, Clothing Guard - Left Arm Socket Assembly, Bolt On Screw, Socket Button Head (/4-28 x 3/4") Insert, Arm Socket, Black Screw, Hex Head (/4-28 x -3/4") Bracket, T-Arm Socket, Threaded, Black Washer (/4 x /2 x /6") Nut, Hex (/4-28) NLA NLA - Bracket, Socket, Black Lockwasher (/4 x 5/32 x /64") 4 B See Chart "T" Arm Kits NOTE: A - Specify upholstery color U67 Black when ordering. B - Includes Items -3 and 5-6. Form No To order call toll free , or

42 Arms - "T" Arm and Hardware "T" Arm Kits Kits Include Items -3,5-6 Part Number Specify U67 upholstery color when ordering. Arm Style Desk Length, Low Range ( Pair) Desk Length, High Range ( Pair) Full Length, Low Range ( Pair) Full Length, High Range ( Pair) Form No To order call toll free , or

43 Half Arms and Hardware Item Number Note Part Number Description NOTE: Quantity Per Package Assembly Half Arm Tube Assembly - Right Half Arm Tube Assembly - Left Grip, Foam - Full Length Sleeve, Bearing Washer (/4 x /2 x /6") Locknut (/4-28) X020 Spacer, Coved (/4 x x 9/6") Screw, Hex Head (/4-28 x -3/4") Socket, Half Arm - Right Socket, Half Arm - Left A,B 444 Half Arm Mounting Hardware (Pair) 2 A - Not Shown B - Includes items 3-8 Form No To order call toll free , or

44 Rigid Side Guards Fabric Clothing Guards - See Miscellaneous Accessories Form No To order call toll free , or

45 Rigid Side Guards Fabric Clothing Guards - See Miscellaneous Accessories Item Number Note Part Number Description Quantity Per Package Assembly Guard, Side, Large w/o Quad Hole - Right (7-3/4" H x 2-3/8" D) Guard, Side, Large w/o Quad Hole - Left (7-3/4" H x 2-3/8" D) Guard, Side, Large w/ Quad Hole - Right (7-3/4" H x 2-3/8" D) Guard, Side, Large w/ Quad Hole - Left (7-3/4" H x 2-3/8" D) Guard, Side, Small w/o Quad Hole - Right (6-/4" H x -/4" D) Guard, Side, Small w/o Quad Hole - Left (6-/4" H x -/4" D) Guard, Side, Small w/ Quad Hole - Right (6-/4" H x -/4" D) Guard, Side, Small w/ Quad Hole - Left (6-/4" H x -/4" D) 3 A Kit, Side Guard Hardware (Pair) Clamp, Half, Threaded Clamp, Half, Non-Threaded Washer, Nylon (/4 x 7/6 x 5/64") Screw, Socket Head (/4-20 x -/4") NOTE: A - Includes items 3-6. Form No To order call toll free , or

46 Non-Removable Fold Down Side Guards Form No To order call toll free , or

47 Non-Removable Fold Down Side Guards Item Number Note Part Number Description Quantity Per Package Assembly 4099 Screw, Hex Head (/4-28 x 2") Cam, Adjustment NLA NLA - Pin, Roll (3/6 x 3/4") Bracket, Support Back, Black -Right Bracket, Support Back, Black -Left Washer, Nylon (25/64 x 7/8 x /32") NLA NLA - Washer, Nylon (/4 x 3/4 x 5/8") Guard, Side, Folding, Black Spacer (/4 x 3/8 x /32") NLA NLA - Spacer, Nylon (/4 x x /4") X020 Spacer, Coved (/4 x x 9/6") Washer (/4 x /2 x /6") Bracket, Latch, Black Spacer (/4 x 7/6 x 5/8") Latch, Torsion Spring - Right Latch, Torsion Spring - Left Washer (/4 x /2 x /32") Locknut (/4-28) Cord, Nylon (6-/2 ft.) Washer, Nylon (3/8 x 7/8 x /6") 8 9 A 4097 Kit, Fold Down Back Mounting Hardware with Side 2 Guards Screw, Hex Head (/4-28 x 2") NLA NLA - Washer, Nylon (/4 x 3/4 x 5/8") Guard, Side, Folding, Black X020 Spacer, Coved (/4 x x 9/6") Washer (/4 x /2 x /6") Locknut (/4-28) 4 26 B 449 Kit, Fixed Back Mounting Hardware with Side Guards 2 NOTE: A - Includes items -8 B - Includes items Form No To order call toll free , or

48 Casters & Mounting Hardware (Before 7//) After 0/4/09, the 5SOFT (5") Semi-Pneumatic is no longer available and is replaced as a 5SOFT (5") Urethane. Order caster in pairs for wheelchairs manufactured before 0/5/09. Item Number Note Part Number Description Quantity Per Package Assembly Screw, Hex Head (5/6-24 x 2-/2") Locknut (5/6-24) Spacer (5/6 x 7/6 x 3/8") Spacer (5/32 x 5/6 x 3/6) Washer, Flat (5/6 x 5/8 x /6") 2 See Chart Casters & Mounting Hardware Caster and Mounting Hardware Wheel Style Wheel Size Tire Type Wheel Spacer Bearing Tire Tube/Insert AT900 3" Urethane X026 4SOFT 4" Semi-Pneu X026 5ALUM 5" Urethane X026 5SOFT 5" Urethane 2807 See Note(s) A, B AT90 5" Urethane X026 AT " Urethane See Note(s) C See Note(s) C 6PNEU 6" Pneumatic X NLA 0260-NLA Form No To order call toll free , or

49 Casters & Mounting Hardware (Before 7//) After 0/4/09, the 5SOFT (5") Semi-Pneumatic is no longer available and is replaced as a 5SOFT (5") NOTE: Urethane. Order caster in pairs for wheelchairs manufactured before 0/5/09. A - Wheel includes Tire and Bearings B - After 0/4/09, the 5SOFT (5") Semi-Pneumatic is no longer available and is replaced as a 5SOFT (5") Urethane. Order caster in pairs for wheelchairs manufactured before 0/5/09. C - Consists of (2) Casters. Form No To order call toll free , or

50 Casters & Hardware (After 6/29/) Item Number Note Part Number Description Quantity Per Package Assembly Screw, Hex Head (5/6-24 x 2-/2") Locknut (5/6-24) Spacer (5/6 x 7/6 x 3/8") Spacer (5/32 x 5/6 x 3/6) Washer, Flat (5/6 x 5/8 x /6") 2 See Chart Caster Wheels (After 6/29/) Caster Wheels Wheel Style Wheel Size Tire Type Wheel Assembly Bearing Spacer Bearing Tire Tube/Insert See Note(s) A AT900 3" Urethane X026 4DC 4" Urethane DC 5 x " Urethane DC 6 x " Urethane DC 6 x -/2" Urethane 6433 NOTE: A - Wheel includes Tire, Bearings and/or Spacer. Form No To order call toll free , or

51 Forks and Hardware Form No To order call toll free , or

52 Item Number Note Part Number Description Forks and Hardware Quantity Per Package Assembly Locknut (/2-20) Washer (/2 x 7/8 x 3/64") Spacer (/2 x 5/8 x 3/8") 4 A 436 Fork and Stem Assembly 5 B 437 Fork and Stem Assembly 6 A,C,J 933 Kit, Fork and Stem Assembly w/ Hardware (3-4" 2 Caster) Fork, Caster Stem, Fork, Short Locknut (/2-20) 2 Washer, Plain (/2 x 7/8 x /6) 6 Spacer (/2 x 5/8 x 3/8") 7 B,D 23 Fork and Stem Assembly NLA NLA - Forks, Suspension, Soft Setting (Pair) Fork, Suspension, Firm Setting - Standard (Pair) 2 9 E 237 Fork, Suspension with Stem Hardware, Soft Setting 2 (Pair) 9 E F 2375-NLA NLA - Kit, Suspension Bolt-On, Soft Setting (Pair) 2 F 2376-NLA NLA - Kit, Suspension Bolt-On, Firm Setting (Pair) 2 0 G Plug Button, Head Tube, Black 2 0 H 6007 Plug Button, Head Tube, Black 2 NOTE: A - 3", 4", 5" Casters. See owner's manual for seat to floor configurations. B - 6" Casters. See owner's manual for seat to floor configurations. C - Includes items - 4. D - Includes items - 3 and 5. E - Includes items - 3 and 8. F - Not shown in illustration. Kits include Suspension Forks and Rear Shock Absorbers plus Caster Mounting Hardware. G - Aluminum Frame chairs. H - Titanium Frame chairs. J - /5/2009, the 3" Fork was revised to have two positioning holes instead of one. For chairs manufactured before /5/2009 it is recommended to order two forks to match. Form No To order call toll free , or

53 Item Number Note Part Number Description NOTE: A A A - Not Shown Wheels - Rear - Composite w/o Handrims Quantity Per Package Assembly Plug, Valve Stem See Chart Composite Rear Wheels Composite Rear Wheels w/o Handrims Wheel Style 22COM 22COM 22COM 24COM7 24COM7 24COM7 Wheel Size 22" 22" 22" 24" 24" 24" Tire Type Pneumatic Pneumatic Flat Free Urethane Pneumatic Pneumatic Flat Free Urethane Wheel Assembly See Note(s) A 0326 See Note(s) A See Note(s) A 0328 Tire X X Tube Insert X See Note(s) A 24COM7 24" KiK SCF 25" 559 Primo NLA See Note(s) B NOTE: A - Stem Hole Plugs (Part Number ) are used with Flat Free and Urethane Tires. B - The 3 Spoke Carbon Fiber wheel comes with handrim. Bearing 407X X X X X X X022 Hub Spacer Form No To order call toll free , or

54 Wheels - Rear - Spoke (w/o Handrims) FN Series (Sun Fusion) Wheel Style FN624 FN624 FN624 FN624 FN625 FN625 FN625 FN626 FN626 Wheel Size 24" 24" 24" 24" 25" 25" 25" 26" 26" Tire Type Primo Pneumatic KIK Schwalbe Primo KIK Schwalbe Primo Pneumatic Wheel Assembly See Note(s) C See Note(s) C See Note(s) C See Note(s) C See Note(s) C See Note(s) C See Note(s) C See Note(s) C Tire X Tube/ Insert X Bearing 407X02 407X02 407X02 407X02 407X02 407X02 407X02 407X02 407X02 Hub Spacer See Note(s) C FN626 26" Schwalbe See Note(s) C X02 NOTE: C - Use the Parts Wheel Configurator when ordering a complete wheel for this model. To omit handrim in the Parts Wheel Configurator, order as a special. Form No To order call toll free , or

55 Wheels - Rear - Spoke (w/o Handrims) HPS Series (High Performance) Wheel Style Wheel Size Tire Type Wheel Assembly 6709-NLA Tire Tube/ Insert 24HPS 24" Pneumatic See Note(s) B 4076X X06 24HPS 24" Pneumatic (Pair) X X06 24HPS 24" Pneumatic 675 w/ Flat Free See Note(s) A 4076X HPS 24" Primo HPS 24" KIK HPS 24" Schwalbe HPS 26" Pneumatic 5652-NLA HPS 26" Pneumatic 6725-NLA 26HPS 26" Primo HPS 26" Schwalbe NOTE: A - Stem Hole Plugs (Part Number ) are used with Flat Free and Urethane Tires. B - Wheels must be replaced in pairs. See Part number 670 for replacement. Bearing 407X02 407X02 407X02 407X02 407X02 407X02 407X02 407X02 407X02 Hub Spacer Form No To order call toll free , or

56 Wheels - Rear - Spoke (w/o Handrims) SP Series (Spoke Wheel) Wheel Style Wheel Size Tire Type Wheel Assembly Tire Tube/ Insert 22SP 22 x -3/8" Pneumatic 5656-NLA SP 22 x -3/8" Pneumatic 5658-NLA w/ Flat Free See Note(s) A SP 24" Pneumatic X X06 24SP 24" Pneumatic 6707 w/ Flat Free See Note(s) A 4076X SP 24" Primo 5662-NLA SP 24" KIK SP 24" Schwalbe SP 26" Pneumatic 679-NLA SP 26" Primo 6723-NLA SP 26" Schwalbe NLA NOTE: A - Stem Hole Plugs (Part Number ) are used with Flat Free and Urethane Tires. Bearing 407X02 407X02 407X02 407X02 407X02 407X02 407X02 407X02 407X02 407X02 Hub Spacer Form No To order call toll free , or

57 Wheels - Rear - Spoke (w/o Handrims) SPIN Series (Spinergy Spox) Wheel Style Bearing Hub Spacer Wheel Size Tire Type Wheel Assembly Tire Tube/ Insert Primo 24" SPIN24 (SPCBK) See Note(s) A Primo 24" SPIN24 (SPCY) Primo 24" SPIN24 (SPCW) Primo 24" SPIN24 (SPCBL) Primo 24" SPIN24 (SPCR) Schwalbe 24" SPIN24 (SPCBK) Schwalbe 24" SPIN24 (SPCY) Schwalbe 24" SPIN24 (SPCW) Schwalbe 24" SPIN24 (SPCBL) Schwalbe 24" SPIN24 (SPCR) Primo 25" SPIN25 (SPCBK) Primo 25" SPIN25 (SPCY) Primo 25" SPIN25 (SPCW) Primo 25" SPIN25 (SPCBL) Primo 25" SPIN25 (SPCR) Schwalbe 25" SPIN25 (SPCBK) Schwalbe 25" SPIN25 (SPCY) Schwalbe 25" SPIN25 (SPCW) Schwalbe 25" SPIN25 (SPCBL) Schwalbe 25" SPIN25 (SPCR) NLA Primo 26" SPIN26 (SPCBK) Primo 26" SPIN26 (SPCY) Primo 26" SPIN26 (SPCW) 56 To order call toll free , or Form No

58 Wheels - Rear - Spoke (w/o Handrims) SPIN Series (Spinergy Spox) Wheel Style SPIN26 (SPCBL) SPIN26 (SPCR) SPIN26 Black Spokes SPIN26 (SPCY) SPIN26 (SPCW) SPIN26 (SPCBL) SPIN26 (SPCR) NOTE: Wheel Size 26" 26" 26" 26" 26" 26" 26" Tire Type Primo Primo Schwalbe Schwalbe Schwalbe Schwalbe Schwalbe Wheel Assembly Tire Tube/ Insert Bearing Hub Spacer A - As of /7/08 Spinergy Wheels changed from black spoke, black hub to a black spoke, silver hub appearance. For chairs built Before /7/08, it is recommended when one wheel is requested that the wheels be replaced in pairs. Form No To order call toll free , or

59 Wheels - Rear - Spoke (w/o Handrims) Miscellaneous (SPLX, 24KNOB, 559TS, 700SP) Wheel Style SPLX24 (SPCBK) SPLX24 (SPCY) (SPCW) (SPCBL) (SPCR) SPLX25 SPLX25 (SPCY) (SPCW) (SPCBL) (SPCR) 24KNOB 559TS 700SP Wheel Size 24" 24" 25" 25" 24" 25" 27" Tire Type Primo (PRIMO) Primo (PRIMO) Schwalbe (CRF23) Schwalbe (CRF23) Pneumatic Primo (PRIMO) Umma Gumma Wheel Assembly NLA 6727-NLA Tire Tube/ Insert Bearing X02 407X02 407X02 Hub Spacer Form No To order call toll free , or

60 Wheels - Rear - Spoke (w/ Handrims) Spoke Wheels are not available with Natural Fit Handrims installed. These handrims must be ordered separately. See Natual Fit Handrim category. Wheels w/ Handrims - SP Series (Standard) Wheel Style Tire Type Anodized Aluminum Plastic Coated (Black) 8 Vertical Projection 8 Oblique Projection 22SP Pneumatic 5588-NLA 559-NLA 5425-NLA 22SP Pneumatic with Flat Free NLA 24SP Pneumatic NLA 5428-NLA 24SP Pneumatic with Flat Free NLA 5430-NLA 24SP Schwalbe SP Primo 5602-NLA NLA 5432-NLA 24SP KIK NLA 5448-NLA 26SP Pneumatic NLA 26SP Primo 566-NLA 567-NLA 5437-NLA 26SP Schwalbe 540 When ordering a Spoke Wheel with Handrim attached (except Wheels ordered thru the Configurator), the standard rim mounting process uses the outside holes of the handrim mounting tabs. To use the inside holes on the mounting tabs to reduce the overall width of the chair, you must order the wheel and handrim assembled as a special order. Wheels w/ Handrims - HPS Series (High Performance) Wheel Style Tire Type Anodized Aluminum Plastic Coated (Black) 8 Vertical Projection 8 Oblique Projection 24HPS Pneumatic NLA 5439-NLA 24HPS Pneumatic with Flat Free NLA 5440-NLA 24HPS Primo NLA 24HPS KIK NLA 26HPS Pneumatic NLA 26HPS Primo NLA 26HPS Schwalbe When ordering a Spoke Wheel with Handrim attached (except Wheels ordered thru the Configurator), the standard rim mounting process uses the outside holes of the handrim mounting tabs. To use the inside holes on the mounting tabs to reduce the overall width of the chair, you must order the wheel and handrim assembled as a special order. Form No To order call toll free , or

61 Wheels - Rear - Spoke (w/ Handrims) Spoke Wheels are not available with Natural Fit Handrims installed. These handrims must be ordered separately. See Natual Fit Handrim category. Wheels w/ Handrims - SPIN Series (Spinergy Spox) Wheel Style SPIN24 (SPCBK) SPIN24 (SPCY, SPCW) (SPCBL, SPCR) SPIN25 (SPCBK) SPIN25 (SPCY, SPCW) (SPCBL, SPCR) SPIN26 (SPCBK) SPIN26 (SPCY, SPCW) (SPCBL, SPCR) NOTE: Tire Type Primo Primo Primo Primo Primo Primo Anodized Aluminum 2339 See Note(s) A See Note(s) B 2349 See Note(s) A See Note(s) B 2344 See Note(s) A Plastic Coated (Black) 8 Vertical Projection 8 Oblique Projection See Note(s) B A - As of /7/08 Spinergy Wheels changed from black spoke, black hub to a black spoke, silver hub appearance. For chairs built Before /7/08, it is recommended when one wheel is requested that the wheels be replaced in pairs. B - Use the Parts Wheel Configurator when ordering a complete wheel for this model. When ordering a Spoke Wheel with Handrim attached (except Wheels ordered thru the Configurator), the standard rim mounting process uses the outside holes of the handrim mounting tabs. To use the inside holes on the mounting tabs to reduce the overall width of the chair, you must order the wheel and handrim assembled as a special order. Wheels w/ Handrims - SPLX Series (Spinergy LX) Wheel Style SPLX24 Tire Type Primo Anodized Aluminum Plastic Coated (Black) See Note(s) A SPLX25 Primo See Note(s) A NOTE: A - Use the Parts Wheel Configurator when ordering a complete wheel for this model 8 Vertical Projection 8 Oblique Projection When ordering a Spoke Wheel with Handrim attached (except Wheels ordered thru the Configurator), the standard rim mounting process uses the outside holes of the handrim mounting tabs. To use the inside holes on the mounting tabs to reduce the overall width of the chair, you must order the wheel and handrim assembled as a special order. Wheels w/ Handrims - FN Series (Sun Fusion) Wheel Style FN624 Tire Type See Note See Note(s) A Anodized Aluminum See Note(s) A Plastic Coated (Black) 8 Vertical Projection 8 Oblique Projection Form No To order call toll free , or

62 Wheels - Rear - Spoke (w/ Handrims) Spoke Wheels are not available with Natural Fit Handrims installed. These handrims must be ordered separately. See Natual Fit Handrim category. Wheels w/ Handrims - FN Series (Sun Fusion) Wheel Style Tire Type Anodized Aluminum Plastic Coated (Black) 8 Vertical Projection 8 Oblique Projection See Note FN625 See Note(s) A See Note(s) A FN626 See Note Black Spokes See Note(s) A See Note(s) A NOTE: A - Fusion Wheel offered in (Primo 24", 25", 26"), (Pneumatic 24", 26"), (KIK Black 24", 25"), (Schwalbe 24", 25", 26") Tires. Use the Parts Wheel Configurator when ordering a complete wheel for this model. When ordering a Spoke Wheel with Handrim attached (except Wheels ordered thru the Configurator), the standard rim mounting process uses the outside holes of the handrim mounting tabs. To use the inside holes on the mounting tabs to reduce the overall width of the chair, you must order the wheel and handrim assembled as a special order. Form No To order call toll free , or

63 Wheels - Rear - Spoke (w/ Handrims) Spoke Wheels are not available with Natural Fit Handrims installed. These handrims must be ordered separately. See Natual Fit Handrim category. Wheels w/ Handrims - Miscellaneous (24KNOB, 559TS, 700SP) Wheel Style Tire Type Anodized Aluminum Plastic Coated (Black) 8 Vertical Projection 8 Oblique Projection 24KNOB Pneumatic TS Primo NLA 5435-NLA 700SP Umma Gumma 5634 When ordering a Spoke Wheel with Handrim attached (except Wheels ordered thru the Configurator), the standard rim mounting process uses the outside holes of the handrim mounting tabs. To use the inside holes on the mounting tabs to reduce the overall width of the chair, you must order the wheel and handrim assembled as a special order. Form No To order call toll free , or

64 Wheels - Rear - Handrims For Natural Fit Handrims Please Refer To That Particular Category. Wheel Style Anodized Aluminum Plastic Coated (Black) 8 Vertical Projections (Black) 8 Oblique Projections (Black) 2 Vertical Projections (Black) 22COM SP COM SP SPIN SPLX FN HPS KNOB TS NLA NLA 3SCF SPIN SPLX FN SP NLA See Note(s) A 26HPS NLA See Note(s) A SPIN NLA See Note(s) B FN NLA See Note(s) B 700SP NLA NOTE: A - No longer available as an individual service part, you must order a Rear Wheel w/ Handrim as a replacement. B - Part No Longer Available individually. See Part # 2344 for replacement. Attachment Points Form No To order call toll free , or

65 Wheels - Rear - Handrim Hardware (Hardware Kits To Attach A Single Handrim Only) For Natural Fit Handrim Hardware, please refer to the Natural Fit Handrim category. Wheel Style 22COM 22SP 24COM7 24SP SPIN24 SPLX24 FN624 24HPS 559TS 3SCF SPIN25 SPLX25 FN625 26SP 26HPS SPIN26 FN SP Anodized Aluminum Black Plastic Coated Vertical Projections Oblique Projections Vertical Projections Form No To order call toll free , or

66 Wheels - Handrims and Handrim Hardware - Natural Fit and Natural Fit LT Form No To order call toll free , or

67 Wheels - Handrims and Handrim Hardware - Natural Fit and Natural Fit LT Item Number Note Part Number Description Quantity Per Package Assembly See Chart # Natural Fit Handrims - 6 Point Attaching Wheels (Spoke Wheels) See Chart # Natural Fit LT Handrims - 6 Point Attaching Wheels (Spoke Wheels) 2 A Kit, Handrim Attaching Hardware - 6 Point Screw, Phillips Pan Head (#0-32 x /2") 6 Locknut (#0-32) 6 NLA - Strap, Securing 2 3 See Chart #3 Natural Fit Handrims - 7 Point Attaching Wheels (Composite Wheels) 3 See Chart #3 Natural Fit LT Handrims - 7 Point Attaching Wheels (Composite Wheels) 4 B Kit, Handrim Attaching Hardware - 7 Point Screw, Phillips Pan Head w/ Patch (#0-32 x -3/4") 7 NLA - Spacer (3/6 x 5/6 x -/6") 7 NLA - Strap, Securing 2 C Instruction Sheet, Natural Fit Handrims NOTE: A - Includes Screws, Locknuts, and Securing Straps. B - Includes Screws, Spacers, and Securing Straps. C - Not Shown # Natural Fit Handrims - 6 Point Attaching Wheels (Spoke Wheels) Handrims sold as each. Includes all Attaching Hardware (item 2) and Instruction Sheet. Grip Style Standard Super Grip 24" Wheels " Wheels " Wheels # Natural Fit LT Handrims - 6 Point Attaching Wheels (Spoke Wheels) Handrims sold as each. Includes all Attaching Hardware (item 2) and Instruction Sheet. Grip Style Standard Super Grip 24" Wheels " Wheels " Wheels #3 Natural Fit Handrims - 7 Point Attaching Wheels (Composite Wheels) Handrims sold as each. Includes all Attaching Hardware (item 4) and Instruction Sheet. Form No To order call toll free , or

68 Wheels - Handrims and Handrim Hardware - Natural Fit and Natural Fit LT #3 Natural Fit Handrims - 7 Point Attaching Wheels (Composite Wheels) Handrims sold as each. Includes all Attaching Hardware (item 4) and Instruction Sheet. Grip Style Standard Super Grip 24" Wheels #3 Natural Fit LT Handrims - 7 Point Attaching Wheels (Composite Wheels) Handrims sold as each. Includes all Attaching Hardware (item 4) and Instruction Sheet. Grip Style Standard Super Grip 24" Wheels Form No To order call toll free , or

69 High Mount Wheel Locks Push to Lock Item Number Note Part Number Description Quantity Per Package Assembly A,B Wheel Lock, High Mount, Push to Lock - Right A,B Wheel Lock, High Mount, Push to Lock - Left 2 C Kit, Wheel Lock Attaching Hardware (" Tubing) Screw, Allen Head (/4-20 x ") 2 Clamp, Half, Non-Threaded Clamp, Half, Threaded NOTE: A - Includes Item 2 B - The rubber tip on the Wheel Lock is not available as a service part. C - Includes (2) Allen Head Screws and Threaded and Non-Threaded Clamp Halves. Form No To order call toll free , or

70 High Mount Wheel Locks Pull to Lock Form No To order call toll free , or

71 Item Number Note Part Number Description High Mount Wheel Locks Pull to Lock Quantity Per Package Assembly NLA NLA - Strap, Wheel Lock Locknut (/4-28) Spacer (/4 x /2 x /2") Washer, Nylon (/4 x /2 x /32") NLA NLA - Screw, Hex Head (/4-28 x 3/4") Screw, Socket Button Head (/4-28 x 3/4") NLA NLA - Spacer (/4 x /2 x 5/32") NLA NLA - Link, Stop, Black Tip, Plastic, Black NLA NLA - Handle, Pull/ Lock, Black - Right NLA NLA - Handle, Pull/ Lock, Black - Left NLA NLA - Link, Wheel Lock, Black Shoe, Wheel Lock Screw, Socket Button Head (/4-28 x 5/8") Screw, Socket Button Head (/4-28 x -/4") Lockwasher (/4 x 5/32 x /64") Washer (/4 x /2 x /6") Clamp, Wheel Lock, Threaded (") Clamp, Wheel Lock, Non-Threaded (") Screw, Allen Head (/4-20 x ") 2 20 A Wheel Lock, Clamp On, Pull to Lock - Right 20 A Wheel Lock, Clamp On, Pull to Lock - Left 2 B Kit, Wheel Lock Attaching Hardware (" tubing) 2 Clamp, Wheel Lock, Threaded (") 2 Clamp, Wheel Lock, Non-Threaded (") 2 Screw, Allen Head (/4-20 x ") 4 NOTE: A - Includes items - 6. B - Includes items 7-9. Form No To order call toll free , or

72 Hill Holder Wheel Lock Item Number Note Part Number Description Quantity Per Package Assembly Tip, Plastic, Black Hill Holder Wheel Lock Assembly - Right Hill Holder Wheel Lock Assembly - Left Clamp, Wheel Lock, Threaded (") Clamp, Wheel Lock, Non-Threaded (") Screw, Allen Head (/4-20 x ") Kit, Wheel Lock Attaching Hardware (" Tubing) Screw, Allen Head (/4-20 x ") 2 Clamp, Half, Non-Threaded Clamp, Half, Threaded Form No To order call toll free , or

73 Hideaway Undermount Wheel Lock (HUMW) Form No To order call toll free , or

74 Hideaway Undermount Wheel Lock (HUMW) Item Number Note Part Number Description Quantity Per Package Assembly Wheel Lock Assembly, Undermount - Right Wheel Lock Assembly, Undermount - Left Tip, Plastic, Black 3 A Kit, Wheel Lock Attaching Hardware (" Tubing) Screw, Allen Head (/4-20 x ") 2 Clamp, Half, Non-Threaded Clamp, Half, Threaded Clamp, Wheel Lock, Threaded (") Clamp, Wheel Lock, Non-Threaded (") Screw, Allen Head (/4-20 x ") 2 NOTE: A - Includes Screws and Half Clamps. Form No To order call toll free , or

75 One Piece Adjustable Angle Footplate - AT504 Item Number Note Part Number Description Quantity Per Package Assembly A 6379 Kit, Clamps Footrest 2 Screw, Socket Set Cone Point (/4-20 x /2") 2 3 Clamp, Footrest 2 4 B,C Hardware, Footplate Mounting 4 C,D 4069 Hardware, Footplate Mounting 4 C,E Hardware, Footplate Mounting 4 C,F 4068 Hardware, Footplate Mounting 5 B Tube, Support, Footplate, Black 2 5 D 274-NLA NLA - Tube, Support, Footplate, Black 2 5 E Support Tube, Footplate 2 5 F 277 Tube, Support, Footplate, Black Screw, Socket Flat Head (/4-28 x ") Washer, Nylon (/4 x 7/6 x 5/64") Locknut (/4-28) 4 9 See Chart #9 Adjustable Angle Footplates NOTE: A - Includes items 2 and 3. B - Tapered Front " Wide C - Includes items 5-8. D - Tapered Front " Wide E - "V" Front " Wide F - "V" Front " Wide Form No To order call toll free , or

76 One Piece Adjustable Angle Footplate - AT504 #9 Adjustable Angle Footplates Chair Width Tapered Front Frame "V" Front Frame 2-4" " " " " " " Form No To order call toll free , or

77 Rigid Tubular Footplate Tapered Front Only Item Number Note Part Number Description Quantity Per Package Assembly 6379 Kit, Clamps Footrest Clamp, Footrest 2 Screw, Socket Set Cone Point (/4-20 x /2") 2 See Chart #3 Rigid Tubular Footplate #3 Rigid Tubular Footplate Chair Width Aluminum Titanium 4" NLA 6359-NLA 5" NLA 6360-NLA 6" NLA 636-NLA 7" NLA 6362-NLA 8" NLA 6363-NLA 9" NLA 6364-NLA 20" NLA 6365-NLA 2" NLA 6366-NLA 22" NLA 6367-NLA Form No To order call toll free , or

78 Miscellaneous Accessories Part Number Description Package Quantity Assembly Quantity 278 Anti-Tipper w/o Attaching See Note(s) A Hardware 2 40 Anti-Tipper Mounting See Note(s) B Hardware Back Pack (2-5" Wide) " W x 3" H x 4" D Back Pack (6-22" Wide) 4" W x 2" H x 4" D NLA Basketball Roller - Adj. Angle Footboard NLA Basetball Roller - One Piece Tubular Footplate Calf Strap - 2-5" Wide (26" Long) Calf Strap " Wide (36" Long) Clamp with Hardware, 3/4" to " Fabric Clothing Protector - 4-5" D, Right Fabric Clothing Protector - 4-5" D, Left Fabric Clothing Protector " D, Right Fabric Clothing Protector " D, Left Impact Guard See Note(s) C 2" Long Protector, Frame, Front, Blue Protector, Frame, Back, Blue NLA Protector, Frame, Front, Silver NLA Protector, Frame, Back, Silver Protector, Frame, Front, Red Protector, Frame, Back, Red Protector, Frame, Front, Black Protector, Frame, Back, Black Positioning Strap, Auto Syle 2-9" W Form No To order call toll free , or

79 Miscellaneous Accessories Part Number Description Package Quantity Assembly Quantity NOTE: Positioning Strap, Auto Style 20-22" W Positioning Strap, Hook & Loop 2-9" Wide Positioning Strap, Hook & Loop 20-22" Wide Seat Pouch 8-/2" W x 7" H x 4" D NLA Spoke Guard, 22" Spoke/Comp. Wheels Spoke Guard -24" Composite Wheels Spoke Guard -24" Spoke Wheel Spoke Guard, "/26" Spoke/Comp. Wheels 4076X00 Tire Pump Wheel Lock Extensions, 6" (Pair) 2 A - Includes () Anti-Tipper. Does not include attaching hardware B - Includes (2) brackets and (4) screws in order to mount a pair of anti-tippers. C - For Rigid Tubular Style Footrest Form No To order call toll free , or

80 Invacare Corporation One Invacare Way Elyria, Oh USA Technical Support Customer Service Customer Service Invacare Corporation. All rights reserved. Republication, duplication or modification in whole or in part is prohibited without prior written permission from Invacare. Trademarks are identified by and. All trademarks are owned by or licensed to Invacare Corporation or its subsidiaries unless otherwise noted. (Revised 04//8) Form No