Grade 80 Chain & Lifting Accessories. Reputation, Quality, Trust...

Transcription

1 Grade 80 & Lifting Accessories Reputation, Quality, Trust... August 2012

2 From humble beginnings, but with a clear concept of quality production, the founders of PWB Anchor Limited established the chain industry in Australia, in the early 1920 s. The formation of Pitt Waddell Pty Ltd in 1923 was the start of a tradition for excellence that continues to this day. Initially making chain and harness fittings by hand, Pitt Waddell Pty Ltd introduced the first fully automated chain welding machines into Australia in In 1962, the Herc Alloy brand was introduced to Australia following investment in our business by Columbus Mcinnon Corporation, then and still today, one of USA s and the Worlds largest and most respected chain and fittings manufacturers. Today, PWB Anchor continues to establish International partnerships with businesses that strive for the same commitment to quality and safety as we have done for almost 90 years. We are proud to continue our association with Columbus Mcinnon USA, YOE Taiwan, Sysma Forge France and Mcinnon South Africa. From our humble single site origins, PWB Anchor now operates from six strategically located sites across Australia. With authorised distributors in every key region in Australia, New Zealand, Indonesia, Singapore, Malaysia, Hong ong, Vietnam and orea, the PWB Anchor name and brands remain synonymous and available across the lifting industry. Whether supporting the Australian economy through the challenges of the war years, through economic down turns and recessions to manufacturing or mining led economic upswings, PWB Anchor has been there every step of the way. 2

3 Why Choose PWB Anchor products and Brands? Why do so many customers ask for PWB Anchor by name? Maybe it is because we are Australia s oldest chain manufacturer, established in or the fact we were Australia s first manual lifting products manufacturer since of our commitment to quality, and our accumulation of technical knowledge built over almost 90 years of Australian manufacturing. we have a comprehensive range of chain and associated lifting equipment, suitable to most lifting applications. we hold extensive inventories in strategically located warehouses across Australia. of our reputation earned over decades of reliable support to Australian and International customers. of our uncompromising commitment to product development and quality. Whatever the reason, we appreciate your support. 3

4 Herc Alloy 800 When it comes to lifting, it is reassuring that to know that you are supported by the brand that is synonymous with the Grade. With Herc Alloy, that s exactly what you get. Since its introduction to the Australian market in 1962, Herc Alloy continues its reputation for quality, safety and value for money in most lifting applications. For 50 years, PWB has manufactured Herc Alloy chains, fittings and lifting slings, not only to Australian Standards, but also to our own demanding standards for quality and consistency. Still proudly made in Australia, Herc Alloy was the first in the Grade supporting Australian Industry and remains the choice of those who demand 50 years of experience in every lift. Celebrating 50 years 4

5 PWB Anchor Herc-Alloy 800 Grade 80, Grade T Herc-Alloy is manufactured from alloy steel, hardened and tempered for industrial lifting applications. Conforms to the mechanical properties of Grade 80 (T) chain specified in Australian Standard AS Tested to a load in excess of 60% of the minimum break strength based on 800MPa. Test Certificates Available on request. s 6mm to 22mm manufactured in Australia. Applications: Industrial Lifting F S R S R F g/100m Herc-Alloy 800 may be supplied with the following identification markings: HA800 CM; PWB HA800; PWB HA; HA CM; CMU HA800; G80; G800; HA800; HA8; PWB-HA8, MA Herc-Alloy 800 Yellow Grade 80, Grade T Herc-Alloy is also available in a yellow powder-coat painted finish for easy identification and handling. Conforms to Australian Standard AS Tested to a load in excess of 60% of the minimum break strength based on 800MPa. Test Certificates available on request. Applications: Industrial Lifting Yellow Herc-Alloy 800 may be supplied with the following identification markings: HA800 CM; PWB HA800; PWB HA; HA CM; CMU HA800; G80; G800; HA800; HA8; PWB-HA8, PWB 80 F S R S R F g/100m Herc-Alloy 800 Pail Paks Grade 80, Grade T Herc-Alloy 800 is also available in easy to handle pail paks for easier storage or store display. Conforms to Australian Standard AS Test Certificates available on request. Applications: Industrial Lifting Meters/ Pail Pak Approx Weight (kg) Herc-Alloy 800 may be supplied with the following identification markings: HA800 CM; PWB HA800; PWB HA; HA CM; CMU HA800; G80; G800; HA800; HA8; PWB-HA8, PWB 80;MA Dimensions & Masses subject to commercial tolerances & design changes without notice. 5

6 PWB Anchor Pre-Assembled Slings Single Leg Adjustable Slings Grade 80 Slings Available in lengths up to 6 metres and adjustable by means of Grab Hooks, these pre-assembled Slings utilize Herc-Alloy 800, PWB Large Series Oblong Link and are supplied with either Pinlok Latchlok Hooks or Pinlok Safety Latch Hooks as terminal fittings. Supplied in accordance with Australian Standard AS 3775, these Slings are assembled, tested, tagged and available ex-stock. Packaged in handy re-useable plastic containers with Test Certificates. Other sizes, configurations and capacities available on request. Applications: Industrial Lifting Two Leg Adjustable Slings Grade 80 Slings Available in lengths up to 6 metres and adjustable by means of Grab Hooks, these pre-assembled Slings utilize Herc-Alloy 800, PWB Large Series Oblong Link and are supplied with either Pinlok Latchlok Hooks or Pinlok Safety Latch Hooks as terminal fittings. Supplied in accordance with Australian Standard AS 3775, these Slings are assembled, tested, tagged and available ex-stock. Packaged in handy re-useable plastic containers with Test Certificates. Other sizes, configurations and capacities available on request. Applications: Industrial Lifting Pinlok Latchlok Hook Size Pinlok Latchlok Hook Size Size (tonnes@ 60 degrees) 60 degrees) 1 metre 1 metre 1 metre 2 metre 2 metre 3 metre 3 metre 4 metre 4 metre 6 metre Pinlok Safety Latch Hook 2 metre 3 metre 4 metre 6 metre metre Pinlok Safety Latch Hook Size 1 metre 2 metre 3 metre 4 metre 6 metre Slings Dimensions & Masses subject to commercial tolerances & design changes without notice. 6

7 PWB Anchor Oblong Links Regular Series Oblong Link Master Link The PWB range of Herc-Alloy Oblong Links allows for greater flexibility in selection and construction of chain sling or wire rope assemblies. For use in both single and 2-leg applications. Test Certificates available on request. Applications: or Wire Rope Slings Includes standard markings of either PWB-HA800 or PWB-HA8 J Oblong Links H 1 Leg 2 Leg H J Large Series Oblong Link Master Link Wider and longer, the large Series Oblong Link is also designed for use in both single and 2 leg applications. Test Certificates Available on request. Applications: or Wire Rope Slings Includes standard markings of either PWB-HA800 or PWB-HA8 (Sizes 6-26mm manufactured in Australia) J H 1 Leg 2 Leg H J / / MA60MLGR80 Dimensions & Masses subject to commercial tolerances & design changes without notice. 7

8 PWB Anchor Oblong Links Large Multi Oblong Link Master Link Multi Designed for use in 2, 3 or 4-leg applications, comprising a master link and two intermediate links, each with the same lifting capacity. The intermediate links allow for back hooking and attachment of thimbles. Test Certificates available on request. Applications: Slings Includes standard markings of either PWB-HA800 or PWB-HA8 (Sizes 6-26mm manufactured in Australia) J U V T H 2,3 or 4 Leg H J T U MA60QA GR MA70QA GR80 V Gr8 Enlarged Multi Oblong Link Master Link Multi Generally to EN 1677 and incorporating a 4:1 deisgn factor, comprising a master link and two generous intermediate links designed to accommodate the attachment of wire rope thimbles. Test Certificates available on request. Applications: Wire Rope Slings * based on 2 leg sling with one leg per intermediate link ** based on 3 or 4 leg sling with maximum two legs per intermediate link Note: values expressed in this table are based on a Design Factor of 4:1 J U V T H * ) ** ) H J T U MA16QA GR MA22QAS GR MA28QAS GR MA36QA GR MA40QA GR MA45QA GR MA50QA GR80 V Oblong Links Dimensions & Masses subject to commercial tolerances & design changes without notice. 8

9 PWB Anchor DNV Links Gr8 Master Link - DNV Master Link Multi PWB Anchor DNV Master Links are designed for use in the offshore industry. Certified in Accordance with DNV Specification offshore container and DNV rules for lifting applications - Loose Gear. Applications: Offshore DNV Links U T V HA - 28ML HA - 32ML HA - 36ML HA - 40ML Gr8 Master Link Multi - DNV Master Link Multi PWB DNV Master Links are designed for use in the offshore industry. Certified in Accordance with DNV Specification offshore container and DNV rules for lifting applications - Loose Gear Applications: Offshore J H T U V HA - 26QA HA - 32QA HA - 36QA HA - 40QA Dimensions & Masses subject to commercial tolerances & design changes without notice. 9

10 PWB Anchor Fittings Gr8 Clevis End Link Clevis Master Link A versatile link designed for use in a reevable sling as top or terminal end fitting. Applications: Reevable Slings A T G L H A L G 7.1/ Y YG Y YG Y YG Y YG 16-8 T H Gr8 Connecting Links Coupling Link Used to connect grade 80 chain to an oblong link, hooks and other components. Traditional design in a yellow painted finish for easy identification. A B D Applications:, Wire Rope and Webbing Slings B A D Y / Y Y / Y / Y / Y 18/20-8 3/ Y / Y Y /4 HA8 Hammerlok Coupling Link Original classic design allows for instant assembly, dismantling and reassembly of slings safely and reliably. B D E* Hole Dia** Applications:, Wire Rope slings D E B 6.0/ /32 CM HAMMERLO HAMMERLO HAMMERLO /20 HAMMERLO /22 HAMMERLO HAMMERLO HAMMERLO Ensure each connector body half (Hammerlok or Couplok ) Shall not have in use more than one load bearing component or chain. Always allow for sufficient articulation and avoid over-crowding to ensure the load will be transmitted axially. For reassembly of connectors, a new pin and stud a sembly is recommended. Fittings Dimensions & Masses subject to commercial tolerances & design changes without notice. 10

11 PWB Anchor Fittings Gr8 Clevis Self-Lock Hook Clevis Self Locking Hook Can be mechanically connected to Grade 80 for easy assembly and use. Applications: or Wire Rope Slings P A T H A P Fittings T Y YD / Y YD Y YD Y YD Y YD Y YD 18/ Y YD 22-8 H Gr8 Eye Self-Lock Hook Eye Self Locking Hook Easily closed with one hand, the Gr8 Self-Lock Hook will lock itself when the load is engaged and will not disengage even if the load is temporarily set down. Applications:, Shackles and Wire Rope Slings A D P T H P A D T Y YC / Y YC Y YC Y YC Y YC Y YC 18/ Y YC Y YC 26-8 H Gr8 Clevis Swivel Self- Lock Hook (with ball bearing) Self Locking Hook Designed with ball bearing allowing the hook to swivel under load. Applications: Slings A P T H YE / YE YE YE YE YE - 18/20-8 Dimensions & Masses subject to commercial tolerances & design changes without notice. 11

12 PWB Anchor Fittings Gr8 Eye Swivel Self-Lock Hook (with ball bearing) Self Locking Hook Designed with ball bearing allowing the hook to swivel under load. Applications: Slings B A D P T H P B A D Y YE / Y YE Y YE Y YE Y YE Y YE 18/ Y YE Y YE 26-8 T H Gr8 Clevis Sling Hook Sling Hook A versatile, general purpose hook suitable for most slinging applications. Applications: Slings H A T P1 A P1 T Y YM / Y YM Y YM Y YM Y YM Y YM 20-8 H HA8 Pinlok Sling Hook Sling Hook A versatile, general purpose hook suitable for most slinging applications. Applications: Slings L D L M N N M A CM HA 800/1000 3/ A CM HA 800/1000 1/ A CM HA 800/1000 5/8 16 D CM Herc-Alloy 3/4 18/20-8 Fittings Dimensions & Masses subject to commercial tolerances & design changes without notice. 12

13 PWB Anchor Fittings HA8 Eye Sling Hook Sling Hook A versatile, general purpose hook suitable for most slinging applications. Features generous throat opening for easy removal from loads. Applications: Slings L D N M D L M Fittings N A CM Herc Alloy 3/ A CM Herc Alloy 1/ A CM Herc Alloy 5/ CM Herc Alloy 3/4 18/ CM Herc Alloy 7/ CM Herc Alloy CM Herc Alloy 1 1/ Gr8 Eye Sling Hook Sling Hook A versatile, general purpose hook suitable for most slinging applications. P1 A D T H Applications: Slings Y 6-8 YP 7.1/ Y YP D Y YP 10-8 A P Y YP Y YP Y YP 18/ Y YP 22-8 H T Y YP Y YP 32-8 Gr8 Clevis Sling Hook with Latch Sling Hook Fitted with sturdy spring loaded safety latch for added security in lifting. Replacement safety latch kits readily available. Applications: Slings A A P1 T H Y YM 6-8 P1 7.1/ Y YM Y YM Y YM 13-8 H T Y YM Y YM 20-8 Dimensions & Masses subject to commercial tolerances & design changes without notice. 13

14 PWB Anchor Fittings MA8 Pinlok Safety Latch Hook Sling Hook Fitted with sturdy spring loaded cast safety latch for added security in lifting. Replacement safety latch kits readily available. Applications: Slings M L D N D L M N 7.1/ Gr8 MAX ALLOY Gr8 MAX ALLOY Gr8 MAX ALLOY Gr8 MAX ALLOY Gr8 MAX ALLOY Gr8 Eye Sling Hook with Latch Sling Hook Fitted with sturdy spring loaded safety latch for added security in lifting. Replacement safety latch kits readily available. Applications: Slings H A D T P1 P1 A D Y 6-8 YP 7.1/ Y YP Y YP Y YP Y YP Y YP 18 / Y YP Y YP Y YP 32-8 T H MA8 Eye Safety Latch Hook Safety Hook Fitted with sturdy spring loaded latch for added security in lifting. Replacement safety latch kits readily available. Applications: Slings M L D N D L M N 6.0/ Gr8 MAX ALLOY Gr8 MAX ALLOY Gr8 MAX ALLOY Gr8 MAX ALLOY Gr8 MAX ALLOY CM Herc Alloy 7/ CM Herc AlloY CM Herc Alloy 1 1/ Fittings Dimensions & Masses subject to commercial tolerances & design changes without notice. 14

15 PWB Anchor Fittings Gr8 Swivel Hook with Latch (ball bearing type) Swivel Hook Designed with ball bearing allowing the hook to swivel under load. Applications: Slings H B A D T P P B A Fittings D Y YSW / Y YSW Y 10-8 YSW Y 13-8 YSW Y 16-8 YSW Y YSW 18/20-8 T H Gr8 Clevis Grab Hook Grab Hook No reduction in when used as a shortening hook on cradle type with supporting wings. Applications: Shortening of Slings H A P A P H Y Y / Y Y Y Y Y Y Y Y Y Y 20-8 HA8 Pinlok Grab Hook Grab Hook No reduction in when used as a shortening hook on cradle type with supporting wings. Applications: Shortening of Slings L N D L M N M D A 10 Clevlok 3/ A 13 Clevlok 1/ Alloy /20 Alloy-8 Dimensions & Masses subject to commercial tolerances & design changes without notice. 15

16 PWB Anchor Fittings Gr8 Eye Cradle Grab Hook Grab Hook No reduction in when used as a shortening hook on cradle type with supporting wings. 32mm may be supplied without supporting wing. Applications: Shortening of Slings A P P A Y 6-8 YH 7.1/ Y YH Y YH Y YH Y YH Y YH Y YH Y YH Y YH 32-8 HA8 Eye Grab Hook Grab Hook Designed with a cradle support that reduces the risk of damaging chain links. No reduction in when used as a shortening hook on cradle type with supporting wings. 32mm may be supplied without supporting wing. Applications: Shortening of Slings L D N M D L M N A 10-8 HA 3/ A 13-8 HA 1/ HA 5/ /20-8 HA 3/ HA 7/ HA /4 Alloy T8 Gr8 Eye Foundry Hook Foundry Hook For use where large throat openings are necessary. Applications: Slings P D A P A D 7.1/ Y YN T Y 10-8 YN 3/8 H Y 13-8 YN 1/2 T H Y 16-8 YN 5/ Y 20-8 YN 3/4 Fittings Dimensions & Masses subject to commercial tolerances & design changes without notice. 16

17 PWB Anchor Fittings HA8 Eye Foundry Hook Foundry Hook For use where large throat openings are necessary. Applications: Slings, Appropriate for foundry applications and unusually bulky attachment points. D N L M D L M Fittings N Foundry Alloy Foundry Alloy Foundry Alloy Foundry Alloy /20 Foundry Alloy Foundry Alloy Foundry Alloy Foundry Alloy-8 Gr8 Clevis Locking Shortening Clutch Shortening Hook Lockable clutch allows the shortening of a chain sling without loss of. The added security of a locking mechanism which can be closed with one hand to prevent chain disengaging. Note: Always ensure the loaded chain passes out of the bottom of the Shortening Clutch. Not to be used as a bottom end fitting or back-hooking or reeving applications. Applications: Slings A B C D E Y C / Y C Y C Y C Y C Y C - 18/20-11 F Gr8 Weld-On Hook Weld On Hook For use as a spreader beam lifting attachment or for fixed anchor point. Allows for axial loading and positive locking with the safety latch. Welding Instructions supplied with each unit. P L T H W A M Applications: Spreader Beams Y YX Y YX Y YX Y YX Y YX Y YX Y YX7 Dimensions & Masses subject to commercial tolerances & design changes without notice. 17

18 PWB Anchor Fittings Gr8 Bolt-On Tie Down Point Bolt On Hook Designed for fixed anchor or lifting point. Supplied without Bolt. Applications: Fixed Anchor or Lifting Point A B R M DAB - 1 tonne DAB - 3 tonne DAB - 5 tonne L Gr8 Weld-On Lifting Point Lifting Point Designed for fixed anchor and or lifting point. Applications: Fixed Anchor or Lifting Point W R L DAA - 1 tonne DAA - 3 tonne DAA - 5 tonne DAA - 8 tonne DAA - 10 tonne DAA - 15 tonne Gr8+10 Swivel Load Ring Load Ring 100% Magnaflux crack detection Rated at 100% at 90 angle. 20,000 cycle fatigue rated to 1.5 times. Hoist ring bail are designed by forged alloy steel, quenched and tempered. 360 swivel with 180 pivot function. Bolt are metric thread specification is a grade 12.9 alloy socket head screw. Applications: Machinery and various lifting applications Torque in Nm C E A B D F N. Fittings Dimensions & Masses subject to commercial tolerances & design changes without notice. 18

19 PWB Anchor Fittings Gr8 Omega Link Clevis Master Link Suitable as chain end fitting. Not for use on PWB Oblong links. Applications: End Fitting D Fittings P 7.1/ Y YO Y YO Y YO Y YO , Y YO 18/20-8 T Gr8 Container Hook Container Hook A special purpose hook suitable for lifting cargo containers. Applications: Cargo Containters Type E F T G H Straight Y A - S Left Y A - R Right Y A - L Swivel Hoist Ring, with alloy steel washer Swivel Hoist Ring 100% Magnaflux crack detection Rated at 100% at 90 degree angle. Proof Load individually to 2.5 times Working Load Limit and certified. Hoist Ring Bail forged from alloy steel, quenched and tempered. Hoist Rings are 360 degree swivel with 180 pivot function. All YOE Swivel Hoist Rings meet or exceed all the requirement of ASME B30.26 Design Factor 5:1 Torque in Nm E A B D E - 0/ E - 0/ E E E - 042L E E E F G Dimensions & Masses subject to commercial tolerances & design changes without notice. 19

20 PWB Anchor Fittings Gr8 Clevis C Hook Clevis Hook A general purpose hook that can be mechanically coupled for easy assembly and use. A P T 7.1/ FE FE FE FE 16-8 H Gr8 Clevis Forest Hook Forest Hook Designed for reeving applications with a narrow throat opening to prevent chain being accidently dislodged in use. Applications: Reeving P T A C 7.1/ Y YT Y YT Y YT 13-8 Gr8 Twist Eye Choke Hook Twist Choke Hook Sliding along the chain length the Twist Eye Choke Hook is designed for use in reeving application with the Omega Link used as the end fitting. Applications: Reeving C A 7.1/ E E E E Fittings Dimensions & Masses subject to commercial tolerances & design changes without notice. 20

21 PWB Anchor Fittings Gr8 Clevis Shackle Clevis Shackle Designed specifically for use as a terminal end fitting with a clevis connection directly to chain application with the Omega Link used as the end fitting. Applications: End Fitting A L Fittings W 7.1/ YR YR YR YR M C Gr8 Shank Self-Lock Hook Shank Hook With all the features of the traditional Self- Lock hook, these can be machined to suit your application. ** d min = the minimum shank dimension after machining Note: Proof testing must be conducted after machining the shank P 1 D d min** T Y YE Y YE Y YE Y YE Y YE Y YE 18/ Y YE Y YE 26-8 H Gr8 Shackle Eye Swivel Hook Size P D A B T H YSW Dimensions & Masses subject to commercial tolerances & design changes without notice. 21

22 PWB Anchor Gr8 Insulated Swivels & Fittings PWB Anchor Gr8 Insulated Swivels & Fittings are avilable for universal coupling of components to chain, wire rope and synthetic slings. All components are forged from high alloy steel compatible with forged chain and fittings. Assembly is fast and easy with only a hammer required. Individual swivels and components are 100% proof load tested to a minimum of 2.5 times the working load limit. All Swivels are individually tested during manufacturing to assure insulating properties. Insulated Swivels are designed with ball bearing which performs to fully swivel under load. Component Selection Guide Gr8 Connector Pin & Sleeve Gr8 Insulated Swivels Gr8 Coupling Maser Link Gr8 Round Sling Coupling Gr8 Half Coupling Link Assembly 7.1/ Y Y Y Y / Y Gr8 Coupling Self-Lok Hook Gr8 Coupling Hook & Latch Gr8 Swivels Dimensions & Masses subject to commercial tolerances & design changes without notice. 22

23 PWB Anchor Gr8 Insulated Swivels & Fittings Gr8 Insulated Swivels with ball bearing Gr8 Half Coupling Link Assembly Size D L 7.1/ BSI BSI BSI BSI / BSI - 18/20-8 Size L A D 7.1/ Fittings / /20-8 Gr8 Round Sling Coupling Gr8 Connector Pin & Sleeve sold seperately. Size W A B 7.1/ YW YW YW YW / YW 18/20-8 Dimensions & Masses subject to commercial tolerances & design changes without notice. 23

24 PWB Anchor Fittings Gr8 Coupling Master Link Gr8 Connector Pin & Sleeve sold seperately. Size W T H 7.1/ ECO ECO ECO ECO ECO - 18/20-8 A Gr8 Coupling Self-Lock Hook Gr8 Connector Pin & Sleeve sold seperately. Size P T H 7.1/ YL YL YL YL / YL 18/20-8 Gr8 Coupling Hook & Latch Gr8 Connector Pin & Sleeve sold seperately. Size P T H 7.1/ EB EB EB EB EB - 18/20-8 Fittings Dimensions & Masses subject to commercial tolerances & design changes without notice. 24

25 PWB Anchor Spare Parts Gr8 Connector Pin & Sleeve Gr8 Load Pin it Size Y Y Y Y Y Y Y Y Y Size Y Y Y Y Y Y Y Spare Parts Gr8 Self-Lok Trigger it Gr8 Safety Latch it Size Y Y Y Y Y Y Y Y Size Y Y Y Y Y Y Y Y Y HA8 Pin & Stud Assembly Size HA8 Latchlok Spares Size HA8 Load Pin Set Size HA8 Safety Latch it Size Always specify size, type and brand of product for correct replacement parts. Spare Parts are not interchangeable between brands. Dimensions & Masses subject to commercial tolerances & design changes without notice. 25

26 PWB Anchor Gr8 Fittings Range Component Selection Guide Gr8 Couplok Sing Leg Regular Series Oblong Link Large Series Oblong Link Multi Leg Regular Series Oblong Link Y Y 42255Y 40310Y Y Y 42050Y 40311Y Y Y 42050Y 40311Y Y Y 42051Y 40312Y Y Y 42052Y 40313Y Y Y 42053Y 40314Y Y Y 42054Y 40315Y Y Y 40325Y 40316Y Y Y 40326Y 40317Y Y Y 40327Y 40318Y Large Series Oblong Link Swivel Hook Foundry Hook Self-Lok Hook Swivel Self-Lok Hook Clevis Self-Lok Hook Clevis Sling Clevis Sling Hook with Latch Clevis Grab Hook Clevis Clutch Large Multi Oblong Link Sling Hook Sling Hook with Latch Grab Hook Y Y 40392Y 40359Y 42256Y 42257Y 42258Y 40564Y Y 40351Y 40337Y 40375Y 40371Y 40384Y 42060Y 40379Y 40565Y Y 40351Y 40337Y 40375Y 40371Y 40384Y 42060Y 40380Y 40565Y Y 40352Y 40338Y 40376Y 40372Y 40385Y 42061Y 40381Y 40566Y Y 40353Y 40339Y 40377Y 40373Y 40386Y 42062Y 40382Y 40567Y Y 40354Y 40340Y 40378Y 40374Y 40387Y 42063Y 40383Y 40568Y Y 40355Y 40499Y 40393Y 40360Y 40388Y 42064Y Y Y 40394Y 40364Y Y 40395Y * Blank Single Leg & Multi Leg Tags available separately Gr8 Range Dimensions & Masses subject to commercial tolerances & design changes without notice. 26

27 PWB Anchor HA800 (Gr8) Guide Maximum Working Load Limit () in tonnes Straight Sling Adjustable Sling * Reeved Sling Straight Sling 60 Guide Straight Sling 90 Straight Sling Reeved Sling 60 Reeved Sling 90 Reeved Sling 120 Basket Sling 60 The values expressed on this table exceed or meet the minimum requirements of AS and are stated in tonnes of 1000kg Basket Sling 90 Basket Sling 120 Reeved Sling Indicates that applies to both rectangular and circular load. Indicates nip angle, which must not exceed 120. Indicates the sling angle is equal to twice the greatest angle of inclination of a leg to the vertical. * Use of a grab hook without cradle or supporting wings reduces the of straight slings to that of reeved slings. The above maximum working load limits are for general conditions of use to group classification of crane mechanisms of M3 as specified in AS must never be exceeded, even at angles less than 60 degrees or even if the load is flexible. For other than general conditions of use the will be derated to confirm to the group classification of crane mechanisms as specified in AS Every care has been taken to ensure the accuracy of information contained in this document which supersedes earlier publications, however PWB Anchor Ltd shall not be liable for any loss or damage howsoever caused arising from the application of such information. PWB Anchor Ltd maintains a policy of progress development of products and reserves the right to alter without notice, the specifications shown within this document. Dimensions & Masses subject to commercial tolerances & design changes without notice. 27

28 PWB Anchor Slings Care, Use and Inspection Care Store Herc-Alloy 800 chain slings on A-frames or wall racks in a clean dry place. Lightly oil Herc-Alloy 800 chain slings before prolonged storage. Never heat-treat Herc-Alloy 800 chain slings. Use Always inspect a chain sling before use to ensure it is free from damage or wear. Ensure that the load is evenly distributed on all sling legs. Ensure that the chain is free of twists and is protected from any sharp corners on the load. Commence the lift slowly, taking up the slack gradually. When lowering, avoid the possibility of crushing the chain by ensuring that the load does not land on it. Inspection It is important to inspect chain slings regularly and that a record is kept for each chain sling. sling inspection record cards are available from PWB Anchor Ltd and Herc-Alloy 800 chain and fitting distributors free of charge. If necessary, clean the sling before inspection. Every chain link should be individually inspected for signs of wear, twisting, stretching, nicks, or gouging, and any worn link measured to determine degree of wear. Oblong links and hooks should be inspected at their load bearing points for signs of wear or distortion, eg widening of hook throat opening. Defective chain links or fittings should be clearly marked to indicate rejection, and the chain sling withdrawn from service until repaired. Connector should be inspected for any signs of wear at their load bearing points, for excessive play of the load pin withing the body halves and for impaired rotation of the body halves around the load pin. (Note: when reassembling a Hammerlok or Couplok it is recommended that a new pin and stud assembly be used. Enter all results in the sling inspection record card. Every care has been taken to ensure the accuracy of information contained in this document which supersedes earlier publications, however PWB Anchor Ltd shall not be liable for any loss or damage howsoever caused arising from the application of such information. PWB Anchor Ltd maintains a policy of progress development of products and reserves the right to alter without notice, the specifications shown within this document. Slings Dimensions & Masses subject to commercial tolerances & design changes without notice. 28

29 PWB Anchor Glossary Conditions of Use Cover the parameters, which need to be considered when determining the Safe Working Load of Lifting equipment. These parameters include sling configuration, operating environment, nature of load, duty cycles and the like. Clevis An integrated part of a lifting component designed for direct connection to a chain that incorporates three features, namely: A fork or yoke integral with the end fitting. A load pin which fits into the link and retains it in the clevis lugs. A retaining mechanism to stop the load pin from falling out. Deration A reduction in the Working Load Limit () of a chain (or of a sling or component) with a consequent revision of its Safe Working Load (SWL), due to such factors as how it is used, what it is used for, its surface finish and the work environment. Maximum Working Load Limit (MWL) The MWL is the maximum load that chain or component may have applied to it in a non-lifting application. Minimum Break Load (MBL) The MBL is the smallest force which, under particular test conditions, fractures a chain or component. It can be obtained by referring to the appropriate Australian Standard for the particular grade and size in question. Safety Latch Glossary Heat Treatment Herc-Alloy 800 & Fittings do not require periodic heat treatment and must never be heat treated. Corrosive Conditions Herc-Alloy 800 & Fittings should not be used in acid or other corrosive environments. Galvanising Herc-Alloy 800 & Fittings must never be hot dipped, mechanically galvanised or electroplated except by PWB Anchor. Hot dipped galvanised slings must always have their working load reduced by 20%. Heat Conditions The strength of all chain slings is adversely affected by heat so care must be exercised when using at elevated temperatures. Where temperatures are likely to be higher than 200 C reductions in the working load limits of Herc-Alloy 800 Slings should be applied. (See table) Temperature Range C Reduction of while heated Up to 200 Nil % % The spring-loaded latch that prevents a hook from being unintentially disconnected. Safety Factor For lifting equipment this is usually 4:1 Safety factor is calculted thus: Safety Factor = Minimum Break Load Working Load Limit Every care has been taken to ensure the accuracy of information contained in this document which supersedes earlier publications, however PWB Anchor Ltd shall not be liable for any loss or damage howsoever caused arising from the application of such information. PWB Anchor Ltd maintains a policy of progress development of products and reserves the right to alter without notice, the specifications shown within this document. Dimensions & Masses subject to commercial tolerances & design changes without notice. 29

30 PWB Anchor Commonly Asked Questions Can I weld Herc-Alloy? Welding Herc-Alloy or Fittings to another material or trying to join them should NOT be done. Due to the materials and heat-treatment that would be applied during the welding process, this would be detrimental to the product and would adversely compromise its performance. Can I Galvanise or Plate Herc Alloy? Herc-Alloy and Fittings must never be hot dipped galvanised, mechanically galvanised or electroplated, except by PWB Anchor. Due to the materials and the heat-treatment processes involved in the manufacture of Grade 80 product, the heat that would transfer to the product during the galvanizing or plating process would be significantly detrimental to the product. Can I use my HA800 Sling as a Tow? Yes, providing the Sling is tagged with its (Working Load Limit), you know the load to be towed and that you never exceed the under any circumstances. How often should I check my s? A Sling should be inspected before each use to ensure it is free from damage and wear. It is important to check chain slings regularly, based on their frequency of use. Authorised PWB Anchor distributors are able to offer an Inspection and Testing service tailored to individual user s needs. Can Herc Alloy chain be oiled before storage? PWB Anchor recommends the light oiling of Herc-Alloy chain slings prior to prolonged storage. Can I use Herc Alloy in a corrosive environment? Herc-Alloy chains and fittings should not be used in acid or other corrosive environments. Please contact your nearest PWB Anchor Branch for more information. Can I reeve chain with a Grab Hook? Yes, however the strength of the chain is reduced by 25%. Is it possible to purchase Sling Assemblies that have no mechanical joining devises? PWB Anchor can provide fully welded chain sling assemblies that have no mechanical joining devices. Prices and lead times are available upon request. Can CAD Files be supplied? Yes we can provide CAD File drawings upon request. What is the Australian Standard for Herc-Alloy chain? Herc-Alloy 800 chain is manufactured to exacting quality control standards and conforms to the mechanical properties of Grade T chain specified in Australian Standard AS2321. Is there an Australian Standard to cover Herc-Alloy Slings? Factory assembled Slings are tested and tagged in accordance with AS3775. What are the markings on chains? Each manufacturer of chain may mark their chain in a different manner to distinguish its Grade or type. However, most rated lifting chains should at least have its Grade marked at regular link intervals. How can I tell the difference in the range of PWB Anchor chains? PWB Anchor manufactures a range of chain in various grades and sizes. manufactured by PWB Anchor is usually marked or stamped with PWB and/or its Grade at regular link intervals. What s the difference in using a HA800 Regular Series Oblong Link and a Large Series Oblong Link? Both types of Oblong Links can be used for Single Leg or 2 Leg applications. The main difference is their physical size which provides versatility in fitment to either large crane hooks or factory hoists. Can I use a 2 leg HA800 Sling as a Single Leg Sling? Yes you can, providing the second leg does not interfere with the lift and the sling can only be rated at its Single Leg Working Load Limit (). On PWB pre-made Grade 80 chain sling assemblies, what is the difference between the two bottom fittings available, the Pinlok Latchlok Hook and the Pinlok Safety Hook? The Pinlok Latchlok Hook will lock itself when the load is engaged. The Pinlok Safety Hook is a general latch (spring loaded). What is the difference between a Hammerlok and a Couplok? Both Hammerlok & Couplok are registered Trademarks of PWB Anchor Limited. They are basically the same product and are used as a connecting device in conjunction with Herc Alloy Grade 80 chain and components. FAQ s Dimensions & Masses subject to commercial tolerances & design changes without notice. 30

31 PWB Anchor Notes Notes Dimensions & Masses subject to commercial tolerances & design changes without notice. 31

32 VICTORIA 441 Grimshaw Street, Bundoora VIC illara Road, Campbellfield VIC Clements Avenue, Bundoora VIC 3083 P: F: E: QUEENSLAND 1/19 Bandara Street, Richlands QLD 4077 P: F: E: NEW SOUTH WALES 98 Forrester Road, St Marys NSW 2760 P: F: E: WESTERN AUSTRALIA 23 Tacoma Circuit, Canning Vale WA 6155 P: F: PWB Anchor Limited Head Office & Manufacturing Plant ABN Grimshaw Street, PO Box 77, Bundoora VIC Australia