UNIDO CLARIFICATIONS no. 4. INVITATION TO BID (ITB) No

Transcription

1 UNIDO CLARIFICATIONS no. 4 INVITATION TO BID (ITB) No SUPPLY OF STANDARDIZED COLOUR CODED BINS AND MOBILE WASTE COLLECTION TROLLEYS FOR SEGREGATED COLLECTION OF BIO-MEDICAL WASTES FOR THE PROJECT Questions 1. On pg. no. 5. Sr. no.1. in Parameter - capacity and colour - It is mentioned minimum capacity as 660 Ltr. However in the same column it is also mentioned that the capacity shall be 660 Ltrs and maximum capacity as 780 Ltr. But in Sr. no.5 Dimensions on the same page, the capacity mentioned is 780Ltrs. Hence please inform the capacity of the bin. 2. According to the litre capacity the dimension of the bins also vary. Hence there should be dimension tolerance of +/- 20%. For your information, the standard capacity of such type of bins is 660L. 3. On pg. no. 5. Sr. no.1. in Parameter - capacity and colour - It is mentioned that the waste collection trolley must have 2 compartments. Kindly give us the dimensions of each compartment. 4. On pg. no. 5. Sr. no.1. in Parameter - capacity and colour - It is mentioned that the waste collection trolley must have 2 compartments. It will not be easy to indicate the segregation if the inner compartment with different colours as the user will have to open the single lid to identify the correct compartment. If two separate lids provided then it will be easy understanding to the user at the 1st sight only. Pls. comment. 5. Sr. no.3, Operation mechanism - As per tender specs., the trolley shall include a locking device when it is stationary. Pls. provide us the image of the trolley with locking device. 6. Sr. no.3, Operation mechanism - As per tender specification, the trolley shall include a plugged outlet for washing and draining located at the lowest point on the container body. Kindly give us the image of the same. 7. Kindly send us the representative images of the product having - Inner, Outer, Top, Side and Bottom View with open lids as well as closed lid. 8. Blue colour Bin is mentioned in Virgin proof plastic whereas all other are in stainless steel. If all bins are in Stainless steel as option why are you taking the blue ones in plastic? This does not make any sense. 9. The delivery addresses are not mentioned. Where exactly are the deliveries to be made. Which hospital has how many quantity of bins. Kindly arrange to let us know the exact delivery address of all the states. 10. Are RED BLUE AND YELLOW bins be made in one trolley or are they all arrange in different trollies. Green Bin has to be Answers As per dimensions given, the maximum capacity of the trolley is 780 litres. Please note that this is the maximum volumetric capacity, however the trolley will not be filled till the brim or the top. Hence it is expected an actual load capacity of 660 litres. The capacity of the trolley should be 660 litre with actual capacity more than the required capacity i.e. with tolerance of +-20%. The internal width is mentioned as 1400mm. Hence the size of each compartment is 700mm X 870mm X 640mm. There should be two lids separated for each compartment which are easily distinguishable. The locking device shall be incorporated to the wheels. Please refer to the attached image in Annex 3. Please be reminded that the images are for illustrative clarification purposes only. The bins and trolleys should strictly be in accordance to the Technical Specifications. Please refer to the attached image in Annex 3. Please be reminded that the images are for illustrative clarification purposes only. The bins and trolleys should strictly be in accordance to the Technical Specifications. Please refer to the attached image in Annex 3. Please be reminded that the images are for illustrative clarification purposes only. The bins and trolleys should strictly be in accordance to the Technical Specifications. The blue coloured bin should be cuboidal/rectangular shape bin/crate made of plastic as per requirment of the BMW Rules of Please note that the blue category contains all glass waste and body implants, however specified disposable for carrying this waste is cardboard box which cannot be fitted inside a circular blue bin. Please also note that the separate cardboard box are not within the scope of the present ITB no Sample image is given as Annex 4. As mentioned in para 5 of the ToR, The goods shall be delivered to listed end-user as clearly outlined below. Accordingly section 10 of the ToR contains the 5 end-users where to ship the goods (please refer to Contact details of the end-user for the five (5) states in India [...]. Red and Yellow Bins should be in one trolley/frame and the remaining blue and white should be separate individual trolleys

2 supplied in a different trolley. 11. If RED BLUE & Yellow are in one trolley then how can two are in stainless steel & 1 in plastic. It is not possible nor feasible. 12. Request you to let us know if you have a sample of the bins which we can go and inspect to enable us to develop the product 13. Is there a specific postal agency to be hired for, or we can use services of any courier / postal agency like DHL etc to do so? 14. When you describe the framework for the coloured bins, are you actually stating that some form of trolley is required to hold the red, yellow, blue and green bins in place? D these bins have to be moveable in the same way that the 660L trolleys will be? since Red (Plastic Waste) and Yellow (Infectious Waste) are required at each generation points. The blue and white bins should be at nursing stations. Please see previous Answer no. 10. Unfortunately, no site visit to inspect the bins is foreseen. There is no specific indication on the courier to be used. It is however it is highly recommended that you use a reputable and reliable registered courier service: please note that it is the sole responsibility of the Bidder to make sure that its bid arrives within the established deadline, as stated in the tender documentation. The bin trolley should have wheels for proper cleaning of floor area as per image given in the Clarification round no. 2, Annex 2.

3 Annex 1 - Revised para SPECIFICATIONS FOR MOBILE WASTE COLLECTION COVERED TROLLEYS of the Techncial Specifications dated 18 May 2016 (please note that in the table below changes have been made only to the row referring to the Material of the Trolley) Sr. No. Parameter Proposed Specifications 1 Capacity and colour 660 liters collection trolley with four (4) pivoting castors. The trolley shall have two (2) compartments. One (1) compartment of yellow colour and another one of red colour. Minimum weight capacity shall be 660 liters and maximum weight capacity shall be 780 liters. 2 Material The trolley shall be made from aluminum sheets of branded company of thickness 2-3 mm. The base & lids shall be of stainless steel as this will make the trolley steadier and at the same time lighter. Also it shall be powder coated in two colours. 3 Four pivoting castors trolley and fitted with a closing device. The four castors shall be capable of pivoting except when controlled in case of towage. Metal parts shall be corrosion resistant. When the trolley moves in a longitudinal direction, the castors shall be positioned in such a way that they do not exceed the corresponding overall dimensions of the container. The trolley shall include a locking device when it is stationary. In case where locking acts upon the castors, it shall act at the minimum upon two adjacent castors. The trolley shall be lidded made of corrosion resistant material. Operation mechanism The gripping of the containers shall be carried out with the lid closed. The lids shall be embossed with the Bio Hazard symbol. The trolley itself shall be quick to navigate with a grab handle and the four (4) attached pivoting castors, the inner as well as the outer surface of the trolleys shall be easy to clean. The interior of the container body shall be smooth and shall not include any protrusion which may be capable of retaining any waste. The closing device shall not hinder the emptying operation. 4 5 Marking Dimensions In case the trolley is fitted with hinges, they shall be easy to clean and lubricate, if necessary. The trolley shall include a plugged outlet for washing and draining located at the lowest point on the container body. The minimum diameter of a plugged outlet shall be 40 mm. it shall be easily accessible. Each bin shall be marked by Bio Hazard symbol. The bin shall also have following printed on it - GEF-UNIDO-MoEFCC Project with the logo of State Govt. Internal height: 870 mm, Internal width: 1400 mm, Internal depth: 640 mm, External height: 1140 mm, External width: 1650 mm, External depth: 770 mm, Capacity: 780 lts, Wheel diameter: 200 mm

4 Annex 2 - Revised para 2.4.1: SPECIFICATIONS FOR CUSTOM MADE COLOUR CODED WASTE BINS of the Techncial Specifications dated 18 May 2016 (please note that in the table below changes have been made only to: the column referring to the Material of the Green Bin; to the columns referring to the Shape, Dimensions and Material of the Blu Bins) S.N COLOU R 1 Red 2 Yellow 3 Blue CAPACIT Y 30 lts QUANTIT Y SHAPE DIMENSIONS MATERIAL Cylindrical lidded Bins cuboidal/re ctangular shape Thickness of bins shall be from 0.8 mm 1.2 mm (20-18 gauge) Thickness of the lid is 1.2 mm to 1.6 mm (18 16 gauge with foot operated lid and handles for lifting, Height = 24 inches Diameter = 14 inches Dropping height = 24 inches SS Pedal dia = 8 mm Pedal height = 4 inches from bottom Length: mm or 14 inches Height: mm or 14 inches The material should be non-toxic, free from contamination, chemical resistant, blended with stabilizers, anticorrosive and antiacidic, absolutely smooth and sanitary, chemical resistant, free from joints, welds or rims. Any Indian Standards (IS) or British Standards (BS) should be kept for the material of the waste bins. Stainless steel (rust free) 304L grade steel and 22 gauge. Lid paddle mechanism shall be of SS (Stainless steel) material. Rubber gasket at the rim of the bin The stainless steel bin should be of epoxy powder coated in the respective color and sticker can be used only for name/bio-hazard label etc. The material should be non-toxic, free from contamination, chemical resistant, blended with stabilizers, anti- OPERATION MECHANISM Foot operated / Automatic foot paddles actuated system with full pedal. Lid is to be welded/fitted with the frame and not to the bin and will always subject to torsional movements through foot pedal FRAME WORK Rugged framework of stainless steel made of 304 L grade meant for placement of bins. Framework made of pipes of 16 gauge with 75 mm ABS (Acrylonitrile- Butadiene- Styrene) synthetic wheels Frame size should be according to the bin fitting i.e. different for single bin frame or double bin frame. Yellow & Red bin should be in double bin frame & remaining 3 colors i.e. white, blue and green should be in single frame. OTHER REQUIREME NTS Wall guards Side stripper for clear view The noncorrugated bins lids MARKINGS/ LABELS Each bin should be marked by Bio Hazard symbol. The bin should also have following printed on it.--- GEF-UNIDO- MoEFCC Project with the logo of State Govt. The description of waste categorization on the top of the lid. label for transporting biomedical waste bags or containers Label shall be nonwashable and prominently visible.

5 4 White Trans lucent 5 lts 4083 Width: mm or 12 inches Dropping height = 24 inches SS Pedal dia = 8 mm Pedal height = 4 inches from bottom The white bin shall have the proportional size and shape as of the red, yellow, blue and green bin Diameter ~ 12 inches (~ 300 mm) Height ~ 3 inches (~ 75 mm) corrosive and antiacidic, absolutely smooth and sanitary, chemical resistant, free from joints, welds or rims. Any Indian Standards (IS) or British Standards (BS) should be kept for the material of the waste bins. Stainless steel (rust free) SS 304 with thickness of sheet 2mm Lid paddle mechanism shall be of SS (Stainless steel) material. Rubber gasket at the rim of the bin The stainless steel bin should be of epoxy powder coated in the respective color and sticker can be used only for name/bio-hazard label etc. puncture proof virgin plastics with minimum thickness of 4 mm The sharp container should be puncture proof and translucent with wide mouth to put sharp waste easily; can be placed on table or hanged/clamped to wall at height from 24 inch to 30 inch near the nursing stations close to needle cutters Not applicable Not applicable 5 Green 30 lts 4158 Cylindrical lidded Bins Thickness of bins shall be minimum 4-8 mm with foot operated lid and handles for lifting. Height = 24 inches Diameter = 14 inches Dropping height = 24 The stainless steel bin should be of epoxy powder coated in the respective color and sticker can be used only for name/bio-hazard label etc. The material should be non-toxic, free from contamination, Foot operated / Automatic foot paddles actuated system with full pedal. Lid is to be welded/fitted with the frame and not to the bin and will Rugged framework of stainless steel made of 304 L grade meant for placement of bins Framework made of pipes of 16 gauge Wall guards Side stripper for clear view The noncorrugated bins lids Each bin should be marked on the sides and on the lid of the bin by the "Recyclable" symbol The bin should also

6 inches Mounted on steel framework with ground clearance height 6 inches Pedal height = 4 inches from bottom chemical resistant, blended with stabilizers, anticorrosive and antiacidic, absolutely smooth and sanitary, chemical resistant, free from joints, welds or rims. Any IS or BS standards should be kept for the material of the waste bins. always subject to torsional movements through foot pedal and be mobile with 75 mm ABS (Acrylonitrile- Butadiene- Styrene)synth etic wheels Lid of the bin should be securely locked with the framework Dropping height = 24 inches Clearance space from ground level should be at 6 inches for cleaning purpose Frame size should be according to the bin fitting i.e. green bin should be in single frame. have following printed on it.--- GEF-UNIDO- MoEFCC Project with the logo of GEF, UNIDO, MoEFCC and State Govt. General Waste shall be labeled at the top of the lid. Label shall be nonwashable and prominently visible. Green is for General waste/biodegradab le like food, paper etc.

7 Annex 3 - Representative image of Trolleys

8 (We remind you that the images are for illustrative clarification purposes only. The bins and trolleys should strictly be in accordance to the Technical Specifications: in the below pictures the colour and the material of the Trolley should be diregarded)

9

10 Annex 4: Representative image of Blue bin in rectangular shape