Annex D Garback Truck Specifications. 9) Cabin: Note: in addition to each manufacturer standard features, the following must be included.

Transcription

1 Annex D Garback Truck Specifications A- SOLID WASTE COLLECTION TRUCK WITH COMPACTOR : MIN. 6 m 3 1) Engine: Cycle, Injection Pump, Water Cooled, Diesel Engine 1.2 No. Of Cylinders : 4 or Max Output: (80 90) Kw /( ) Hp The supplier shall specify the torque. 1.4 Fuel Tank Capacity: Not Less Than100 L 1.5 Gas Emission complying with EURO 3. (Suitable For Iraqi Weather Conditions,Dusty Area) 2) Clutch : Hydraulic Control Dry Single Plate With Diaphragm Spring 3) Transmission: Minimum 5 Speed Direct Drive 4) Brakes: 4.1 At least ABS system is incorporated; 4.2 Service: Hydraulic Dual Circuit, Front Two Leading, Rear Two Leading 4.3 Parking: Mechanical Expanded Type At Rear Of Transmission 5) Steering: 5.1 power steering 6) Axles and Weights: 6.1 Gross Vehicle Weight of at least: 6-7 ton. 7) Suspension: 7.1 Semi-Elliptical Leaf Spring, Hydraulic Double Acting Telescopic Shock Absorber 8) Electrical System: 8.1 Battery: 12 V * 2 at least 65 AH.( for each); 8.2 Alternator: 24 V / Minimum 40 A; 8.3 Starter: 24 V; 9) Cabin: Note: in addition to each manufacturer standard features, the following must be included. 9.1 Single cab tilting forward hydraulically or ordinary (classical) truck shape; 9.2 Mono-coque or Ladder Structure With Bed Space; 9.3 Drivers Standard Suspension Seat ; 9.4 Seating Capacity and finishing material: 3 made of fabric; 9.5 Laminated, Tinted and tempered Windshield ; 9.6 Cab reflecting Mirrors left and right ; 9.7 Gauges(Engine Oil Pressure, Air Brake System Pressure system Water Temp, Fuel, Speedometer, Fuel Level Indicator And other All Necessary Gauges, 9.8 Two access doors, including anti-theft locks; 9.9 Electrically operated windows, 9.10 Non slippery steel steps + grip handle for climbing; 9.11 Floor covered with non-slippery plastic cover; 9.12 Extension cable with lamp ; 9.13 Electrical multi speed water pump for windscreen washer; 9.14 Sun visors for Driver and Co-driver; 9.15 Protection grill for head and rear lamps; 9.16 CD player /Radio, 9.17 Air Conditioner And Heater With Multispeed Fan, 9.18 Safety Belt For Driver &Co Driver, 9.19 Monitoring Screen Including Transmitting Camera For Viewing The Rear Part Of The Truck While Driving Reverse, 9.20 Standard tool kit with jack Fire extinguisher 9.22 Immobilizer 9.23 Warning triangle 9.24 Other Necessary Instruments. 10) Wheels and Tyres: 1

2 As per manufacturer with 1 spare and inflating facility and 10mm hose. 11) Super Structure: 11.1 Body; a. Body material: steel sheet, floor thickness at least 4mm, side thickness at least 3mm, side guides at least 6mm b. Heavy duty refuse collection superstructure fitted with crushing and press compaction mechanism for household refuse and industrial waste. c. There Is A Dirty Water Tank In Front Bottom of The Body. d. All the Body is reinforced With Specially Shaped Profiles at Sides, Bottom and Top. e. the Body Is Mounted On the Vehicle Chassis with Elastic/Rigid Elements f. Volume Hopper: minimum 0.6 m Ejection Plate: a. Ejection Plate ( is controlled hydraulically or pneumatically): b. Ejection Plate Moves On The Rails Welded at suitable place From The Floor To The Inner Sides of The Body. c. Ejection Plate Has High Density Nylon Shoes With Bolted Connection. d. Ejection Plate Moves By Means of a Double Acting Telescopic Cylinder actuator. It Is Kept at The Rear of The Body When It Is Empty, and Moves Automatically To The Front By Means of a Counter Pressure Valve. Otherwise; There is a Container lifting Device Powered By Double Acting Hydraulic Cylinders to Lift and Tilt Refuse Containers Tailgate a. Tailgate Is Connected To The Body With Top Hinges, for the tilted type or opened upwards by mean by two double acting hydraulic clynder and Opened Up wards By Means Of Two Double Acting Hydraulic Cylinders. It is locked automatically while It Is Closed. b. There is a Specially Formed Sealing Element Mounted On outer frame which is contact to the body of the Tailgate to Prevent any Dirty Water Leakage From The Body. c. There is a Hopper in the Tailgate made of Steel Plates of thickness not less than 6mm. The Refuse Being Loaded In The Hopper Is Pressed Into The Body By Means of A Compression Mechanism. d. The Compression Mechanism Consists of a Slide and a Shovel. Movement of The Shovel and Slide Is Made By Double Acting Hydraulic Cylinders. e. The Slide Has High Density Nylon Shoes Moving In The Rails. There Are Also Centering Shoes To Keep It In Central Position Securely. f. There are Anti dropping Safety Valves on the Tailgate Hydraulic Cylinders Switch plate (push button or lever) for emergency stop Rotating Beacon Lamps 11.6 Working Lamp 11.7 Reverse Working Buzzer 11.8 Operating Instruction and Maintenance Catalogue 2

3 11.9 Equipments: a. Power Take Off: Mounted On Side Of Transmission, Controlled By Operating Lever Attached In The Cab; b. Pump: Hydraulic Gear Type, Capacity : at least L / Min; c. Hydraulic System Pressure: at least 200 Kg. f / cm 2 d. Either; Electric Control, Pneumatic or hydraulically Type Accessories: a. Hydraulically or pneumatically operated Container Liftingand emptyingsystem For Refuse Containers. b. Hinged Safety Bar Between The Tailgate and The Body c. Rear Light for Night Works. d. Two Foldable Operator Steps At The Rear With Safety Bars. (Opt.) e. Beacon Lamp. f. Mudguards and Rubber Flaps. g. Driver Buzzer h. Foldable Side Barrier. i. There are waterproof / sun proof Start, Stop and Rescue, Driver Signal, Engine and unloading Push Buttons on the Control Box, otherwise, by Manual Levers. j. The required number of folding type anti- mud platforms. 12) Washing System : 12.1 Cleaning water tank at least 500 litre placed behind the cabin, made of stainless steel, thickness at least 3 mm High pressure piston pump providing at least l/min (at 150 bars) water to the high pressure gun High pressure hose reel and high pressure gun (½" dia, 15 m long) Washing system control at rear side of hopper 13) Painting and Undercoating: 13.1 For the superstructure, defects in the finished coat of paint occurring for any reason prior to delivery to the Purchaser shall be remedied to the satisfaction of the Purchaser 13.2 The superstructure shall be undercoated to resist the effects of road debris and shall be rust proofed for a guaranteed period of at least five years The colour of the finish paint for cabin, chassis and superstructure shall be Orange. 14) Tool Kit: a. The Supplier shall provide a complete tool kit to be carried on the vehicle or equipment for the purpose of changing wheels / tires and emergency road side repairs. The supplier shall specify the list of equipment that it proposes for this purpose. b. The supplier shall provide the vehicle cab with a fire extinguisher. B- SOLID WASTE COLLECTION TRUCK WITH COMPACTOR : MIN. 10 M3 1) Engine: Cycle, Injection Pump, Water Cooled, Diesel Engine 1.7 No. Of Cylinders : Max Output: ( ) Kw /( ) Hp The supplier shall specify the torque. 1.9 Fuel Tank Capacity: Not Less Than : 200 L 1.10 Gas Emission complying with EURO 3. (Suitable For Iraqi Weather Conditions, Dusty Area). 2) Clutch : Hydraulic Control Dry Single Plate With Diaphragm Spring 3) Transmission: Minimum 5 Speed Direct Drive 4) Brakes: 4.1 At least ABS system is incorporated 4.2 Service: Air Over Hydraulic Dual Circuit, Front Two Leading, Rear Two Leading Trailing. 3

4 4.3 Parking: Mechanical Expanded Type At Rear Of Transmission 5) Steering: 5.1 power steering 6) Axles and Weights: 6.1 Gross Vehicle Weight of at least: ton. 7) Suspension: 7.1 Front: Semi-Elliptical Alloy Steel Leaf Spring Shackle Type, Hydraulic Double Acting Telescopic Shock Absorber. 8) Electrical System: 8.1 Battery: 12 V * 2 at least 65 AH.(for each) 8.2 Alternator: 24 V / Minimum 40 A 8.3 Starter: 24 V 9) Cabin: Note: in addition to each manufacturer standard features, the following must be included. 9.1 Single cab tilting forward hydraulically or ordinary (classical) truck shape; 9.2 Mono-coque or Ladder Structure With Bed Space; 9.3 Drivers Standard Suspension Seat ; 9.4 Seating Capacity and finishing material: 3 made of fabric; 9.5 Laminated, Tinted and tempered Windshield ; 9.6 Cab reflecting Mirrors left and right ; 9.7 Gauges(Engine Oil Pressure, Air Brake System Pressure system Water Temp, Fuel, Speedometer, Fuel Level Indicator And other All Necessary Gauges, 9.8 Two access doors, including anti-theft locks; 9.9 Electrically operated windows, 9.10 Non slippery steel steps + grip handle for climbing; 9.11 Floor covered with non-slippery plastic cover; 9.12 Extension cable with lamp ; 9.13 Electrical multi speed water pump for windscreen washer; 9.14 Sun visors for Driver and Co-driver; 9.15 Protection grill for head and rear lamps; 9.16 CD player /Radio, 9.17 Air Conditioner And Heater With Multispeed Fan, 9.18 Safety Belt For Driver &Co Driver, 9.19 Monitoring Screen Including Transmitting Camera For Viewing The Rear Part Of The Truck While Driving Reverse, 9.20 Standard tool kit with jack Fire extinguisher 9.22 Immobilizer 9.23 Warning triangle 9.24 Other Necessary Instruments 10) Wheels and Tires: As per manufacturer with 1 spare inflating facility and (10 m) hose 11) Super Structure: 11.1 Body; a. Body material: steel sheet, floor thickness at least 4mm, side thickness at least 3mm, side guides at least 6mm b. Heavy duty refuse collection superstructure fitted with crushing and press compaction mechanism for household refuse and industrial waste. c. There Is A Dirty Water Tank In Front Bottom of The Body. d. All the Body is reinforced With Specially Shaped Profiles at Sides, Bottom and Top. e. the Body Is Mounted On the Vehicle Chassis with Elastic/Rigid Elements 4

5 f. Volume Hopper: minimum m Ejection Plate: a. Ejection Plate ( is controlled hydraulically or pneumatically): b. Ejection Plate Moves On The Rails Welded Above From The Floor To The Inner Sides of The Body. c. Ejection Plate Has High Density Nylon Shoes With Bolted Connection. d. Ejection Plate Moves By Means of a Double Acting Telescopic Cylinder actuator. It Is Kept at The Rear of The Body When It Is Empty, and Moves Automatically To The Front By Means of a Counter Pressure Valve as The Refuse Is Packed In The Tailgate. Otherwise; There is a Container lifting Device Powered By Double Acting Hydraulic Cylinders to Lift and Tilt Refuse Containers Tailgate a. Tailgate Is connected To the Body With Top Hinges for the tilted type, or Opened Upwards By Means Of Two Double Acting Hydraulic Cylinders. It is locked automatically while It Is Closed. b. There is a specially Formed Sealing Element Mounted On outer frame which is in contact to the body of the Tailgate to Prevent any Dirty Water Leakage From The Body. c. There is a Hopper in the Tailgate made of Steel Plates of thickness not less than 6mm. The Refuse Being Loaded In The Hopper Is Pressed Into The Body By Means of A Compression Mechanism. d. The Compression Mechanism Consists of a Slide and a Shovel. Movement of The Shovel and Slide Is Made By Double Acting Hydraulic Cylinders. e. The Slide Has High Density Nylon Shoes Moving In The Rails. There Are Also Centering Shoes To Keep It In Central Position Securely. f. There are Anti dropping Safety Valves on the Tailgate Hydraulic Cylinders Switch plate (push button or lever) for emergency stop Rotating Beacon Lamps 11.6 Working Lamp 11.7 Reverse Working Buzzer 11.8 Operating Instruction and Maintenance Catalogue 11.9 Equipments: a. Power Take Off: Mounted On Side Of Transmission, Controlled By Operating Lever Attached In The Cab; b. Pump: Hydraulic Gear Type, Capacity : at least L / Min; c. Hydraulic System Pressure: at least 200 Kg. f / cm 2 d. Either; Electric Control, Pneumatic or hydraulically Type Accessories: a. Hydraulically or pneumatically operated Container Liftingand emptyingsystem For Refuse Containers. b. Hinged Safety Bar Between The Tailgate and The Body 5

6 c. Rear Light for Night Works. d. Two Foldable Operator Steps At The Rear With Safety Bars. (Opt.) e. Beacon Lamp. f. Mudguards and Rubber Flaps. g. Driver Buzzer h. Foldable Side Barrier. i. There are waterproof / sun proof Start, Stop and Rescue, Driver Signal, Engine and unloading Push Buttons on the Control Box, otherwise, by Manual Levers. j. The required number of folding type anti- mud platforms. 12) Washing System : 12.1 Cleaning water tank at least 500 litre placed behind the cabin, made of stainless steel, thickness at least 3 mm High pressure piston pump providing at least l/min (at 150 bars) water to the high pressure gun High pressure hose reel and high pressure gun (½" dia, 15 m long) Washing system control at rear side of hopper 13) Painting and Undercoating: 13.1 For the superstructure, defects in the finished coat of paint occurring for any reason prior to delivery to the Purchaser shall be remedied to the satisfaction of the Purchaser 13.2 The superstructure shall be undercoated to resist the effects of road debris and shall be rust proofed for a guaranteed period of at least five years The colour of the finish paint for cabin, chassis and superstructure shall be Orange. 14) Tool Kit: a. The Supplier shall provide a complete tool kit to be carried on the vehicle or equipment for the purpose of changing wheels / tires and emergency road side repairs. The supplier shall specify the list of equipment that it proposes for this purpose. b. The supplier shall provide the vehicle cab with a fire extinguisher. Related Services in which should be included for reach Unit: # Description of Service Physical Unit Quantity 1 2 Original catalogues in English for each unit. Operation and maintenance manuals in English for each unit. Ea. 1 Ea. 1 3 Set of maintenance tools for each unit. Set 1 6