HD78 Cargo Wide Short Wheelbase
|
|
|
- Estella Wheeler
- 5 years ago
- Views:
Transcription
1 HD78 Cargo Wide Short Wheelbase HYUNDAI HD Series Cab Drive System Application Engines Dimensions (mm) Overall (Chassis Cab / Cargo) Wheel Tread Overhang (Chassis Cab / Cargo) Deck Size (Cargo) C.A (Cab to rear Axle) C.E (Cab to end of frame) Min. Ground Clearance Min. Turning Radius Weight (kg) Chassis Cab Weight (Chassis Cab / Cargo) ** Max Gross Vehicle Weight Rear Floor m Rear Wide Standard High Short 4 X 2 D4DD 2,780 5,260 / 5,275 2,000 / 2,030 2,270 / 2,355 1,665 / 1,495 1,120 / 1,120 1,360 / 1,375 3,410 1, ,070 2,240 3, ,550 / 3,005 1,605 / 1, / 1,320 7,800 3,100 / 4,700 ** Max. GVW includes the front & rear axle loads based on the permissible tire load. 33 _Hyundai Commercial Vehicle SPECIFICATIONS
2 HD78 Cargo Wide long Wheelbase HYUNDAI HD Series Cab Drive System Application Engines D4DC D4DB D4DD D4GA Dimensions (mm) 3,735 3,775 Overall (Chassis Cab / Cargo) 6,590 / 6,715 6,630 / 6,765 Wheel Tread 1,665 / 1,495 1,680 / 1,495 Overhang (Chassis Cab / Cargo) Deck Size (Cargo) Rear Floor C.A (Cab to rear Axle) 3,195 3,235 C.E (Cab to end of frame) 4,860 4,900 Min. Ground Clearance Min. Turning Radius Weight (kg) Chassis Cab Weight (Chassis Cab / Cargo) ** Max Gross Vehicle Weight m 2,470 / 3,060 2,565 / 3,155 2,575 / 3,165 2,755 / 3,345 1,595 / 1,695 1,660 / 1,760 1,660 / 1,760 1,790 / 1,890 Rear 875 / 1, / 1, / 1, / 1,455 2,000 / 2,170 2,000 / 2,170 2,215 / 2,355 Wide Standard High Long 4 X 2 1,120 / 1, ,800 3,100 / 4,700 2,270 / 2,355 1,815 / 1,860 1,735 / 1,860 4,880 4,850 1,060 2, ,070 ** Max. GVW includes the front & rear axle loads based on the permissible tire load. Hyundai Commercial Vehicle SPECIFICATIONS_ 34
3 HD78 Cargo Wide Super Cab Long Wheelbase HYUNDAI HD Series Cab Drive System Application Engines D4DC D4DB D4DD D4GA Dimensions (mm) 3,735 3,775 Overall (Chassis Cab / Cargo) 6,590 / 6,715 6,590 / 6,715 6,630 / 1,725 Wheel Tread 1,665 / 1,495 1,680 / 1,495 Overhang (Chassis Cab / Cargo) Deck Size (Cargo) C.A (Cab to rear Axle) Min. Ground Clearance Min. Turning Radius Weight (kg) Chassis Cab Weight (Chassis Cab / Cargo) Rear 1,665 / 1,860 1,735 / 1,860 1,735 / 1,830 Floor m 2,935 4,600 2,490 / 3,055 2,545 / 3,110 2,595 / 3,160 2,775 / 3,340 1,600 / 1,665 1,635 / 1,700 1,665 / 1,730 1,795 / 1,860 Rear 890 / 1, / 1, / 1, / 1,480 2,000 / 2,170 C.E (Cab to end of frame) 4,560 Wide Super High Long 4 X 2 1,120 / 1,120 2,000 / 2,170 2,215 / 2,355 2,270 / 2,355 ** Max Gross Vehicle Weight 7,800 2,895 4,580 2, ,060 1, ,100 / 4,700 ** Max. GVW includes the front & rear axle loads based on the permissible tire load. 35 _Hyundai Commercial Vehicle SPECIFICATIONS
4 Chassis Specifications Engine Model D4DC D4DB D4DD D4GA14 D4GA15 D4GA17 Natural Aspiration Turbo Charger Intercooler 4 stroke-cycle, water-cooled, direct-injection diesel engine number of Cylinder 4 in-line Piston Displacement (cc) 3,907 3,907 3,907 3,933 Bore x Stmke (mm) 104 x x x x 118 Compression Ratio 18.1 : : : : 1 Eurol 120 / 3, / 2, Euroll / 2, Max. Power** (ps/rpm) Euro III / 2, Euro iv / 2, / 2,500 Euro V / 2,500 Eurol 30 / 2, / 1, Euroll - 38 / 1, Max. Torque ** (kg.m/rpm) Euro III / 1, Euro iv / 1, / 1,400 - Euro V / 1,400 Fuel Metering System Injection pump Governor Fuel filter In-line System Mechanical Spin-on type Common Rail System Electrical by ECU Spin-on type, 2 Filter Cooling System System Cooling Fan Radiator System Water-Cooling. Forced circulation by centrifugal water pump Auto Clutched Corrugated fin and tube type with pressure cap and condenser tank Forced Lubrication Oil by gear pump Lubrication System Oil Filter Full flow filter with paper element Oil Cooler Shell & Plate Oil Grade CF-4 or above (API Classification) CI-4 or above (API Classification) Eletrical System Battery Alternator 24V-40A 24V-90AH MF 24V-50A 24V-55A Starter 24V-5.0kW Timing System OverHead Valve, 2 Valves per Cylinder Single OverHead Cam, 4 Valves per Cylinder ** Max. Power and Torque of engine may vary according to each country. Clutch Facing Material Facing Size (mm) Outside dia x Inside dia Hyundai Commercial Vehicle SPECIFICATIONS_ 36 Hydraulic control, Diaphragm spring, Single dry plate, Pre-Damper Non-Asbestos ø300 x 190 ø362 x 236
5 Transmission Engine D4DC D4DB D4DD D4GA14 D4GA15 D4GA17 Model M035S5 5 Speed Manual T060S5 (OPT: T060S6) <- (OPT: 6 Speed) Gear Ratio 1st 2nd 3rd 4th 5th 6th Reverse (6.701) (3.712) (2.084) (1.351) (1.000) - (0.732) (5.983) Gear Oil T.G.S. (Transmission Gear Shift) SAE75W/85 (GL4, Syntheric) Floor shift, Mechanical remote control Rear Axle Capacity kg Full floating type 4,700 Final Reduction Gear Single Reduction, Hypoid gear G/Ratio / / Axle Capacity kg Reverse Elliot type I beam 2,600 Tire & Wheel Tire Single, Dual Rear 7.50R 16 12PR (OPT:14PR) Wheel 6.00GS 16 SDC-127 Steering Tilting Angle 2-Spoke, Ball-nut type, Tilt & Telescopic steering column 55.5 ~ 62.2 Turning Angle Inner 44 (Wide) Outer 34 (Wide) Service Brake Actuation Size (mm) Rear Size (mm) Hydraulic with vacuum servo assistance, dual circuit Drum diameter x Lining width x Lining thickness : ø320 x 85 x 10 Adjuster Auto adjuster (OPT) Auto adjuster (STD) 37 _Hyundai Commercial Vehicle SPECIFICATIONS
6 Parking Brake Engine Actuation D4DC D4DB D4DD D4GA14 D4GA15 D4GA17 Internal expanding type on propellarshaft at the rear of transmission assy Size (mm) 0180 x 35 x 5 (M*S5 T/M), 0190 x 45 x 4 (M035S5 T/M), 0230 x 55 x 4 (T60S* T/M) * cf : Drum diameter x Lining width x Lining thickness Auxiliary Brake Exhaust Brake Vacuum operated, butterfly valve type Suspension Semi-elliptic, laminated leaf springs with shock absorber Shock absorber Hydraulic double acting telescopic type on the front & rear axles Exhaust system General - DOC EGR + DOC + PMC Tail pipe Droptail type, blowing to chassis rearward Fuel tank Capacity 100 liter Material Steel Frame H type frame with channel sectional side rail & cross members, side rail is reinforced with outer stiffeners Main section side rail dimension (mm) Depth x Flange x Thickness:183 x 60 x 6t Hyundai Commercial Vehicle SPECIFICATIONS_ 38
7 Annotations 1) Empty vehicle weight and curb weight shown are to 3.5% variation to allow for production tolerance. 2) Empty vehicle weight and curb weight include weight of oil, fuel, coolant and spare tire carrier & bracket, spare tire but exclude standard tool set 3) The vehicle specifications may differ per country. 4) Hyundai motor company reserves the right to alter the specifications, equipment or options or discontinue the models at any time without prior not 39 _Hyundai Commercial Vehicle SPECIFICATIONS
COUNTY. **Max. GVW includes the front & rear axle loads based on the permissible tire load.
1. Dimension, Weight Specifications Vehicle Drive type Suspension type Dimensions (mm) Overall Length Overall Width Overall Height Wheel Base Wheel tread Overhang Min. Ground Clearance Weight(Kg) Engine
SPECIFICATIONS MANUAL
SUBJECT TO CHANGE FOR PRODUCT IMPROVEMENT TATA DAEWOO HEAVY DUTY TRUCK SPECIFICATIONS MANUAL MODEL NAME : 4x2 Wing body Truck MODEL CODE : June, 2014. GENERAL DIAGRAM DIMENSIONS (mm) Overall Length OL
TATA DAEWOO COMMERCIAL VEHICLE CO., LTD.
SUBJECT TO CHANGE FOR PRODUCT IMPROVEMENT TATA DAEWOO HEAVY DUTY TRUCK SPECIFICATIONS MANUAL MODEL NAME : 6x4 Arm Roll MODEL CODE : February 2013 TATA DAEWOO COMMERCIAL VEHICLE CO., LTD. February 2013
Hyundai Bus H350 COUNTY AERO TOWN SUPER AERO CITY UNIVERSE
Hyundai Bus H350 COUNTY AERO TOWN SUPER AERO CITY UNIVERSE 4 23 33 40 49 H350 VAN BUS TRUCK H350 VAN SHORT BODY HYUNDAI BUS Body type Drive type Suspension Application Engines Emission Dimensions (mm)
MODEL NAME : 8 4 FUEL TANK LORRY(25kl) MODEL CODE : M9AVF
υ SUBJECT TO CHANGE FOR PRODUCT IMPROVEMENT υ TATA DAEWOO HEAVY DUTY TRUCK SPECIFICATIONS MANUAL MODEL NAME : 8 4 FUEL TANK LORRY(25kl) MODEL CODE : JANUARY, 2015. TATA DAEWOO COMMERCIAL VEHICLE CO., LTD.
Driver s Suspension Seat (EX4) GVM 4,500kg GCM 8,000kg. Smart Key Entry with Security System (EX6) GVM 6,500kg GCM 10,000kg
KEY FEATURES KEY SPECIFICATIONS Driver s Suspension Seat (EX4) GVM 4,500kg GCM 8,000kg Smart Key Entry with Security System (EX6) GVM 6,500kg GCM 10,000kg Four Wheel Disc Brakes Wheelbase SWB 2,850mm MWB
HINO 300 Series 4x2, Truck Chassis
SPECIFICATIONS HINO 300 Series 4x2, Truck Chassis Spec. No. SS-XZ356A Drawing No. CDRXZ348/349 - RHD - 110 kw (Euro-4) - 6.5 ton GVMR - Wide Cab RATINGS & AXLE LOAD LIMIT (kg) GVM GCM Front Axle Rear Axle
Tilt & Telescopic steering wheel Driver console box Air conditioner louver(option) Middle safety mirror (city)
2X1 Seat arrangement with middle door 2X2 Seat arrangement INTERIOR Tilt & Telescopic steering wheel Driver console box Air conditioner louver(option) Middle safety mirror (city) Acryl type sunvisor (city)
TRUCK CRANE TG-500M JAPANESE SPECIFICATIONS NISSAN DIESEL KC-KG530TN TG-500M MITSUBISHI KC-KS509S TG-500M Control No.
TRUCK CRANE TG-500M JAPANESE SPECIFICATIONS TG CARRIER MODEL NISSAN DIESEL KC-KG530TN MITSUBISHI KC-KS509S SPEC. NO. TG-500M-5-10101 Control No. JA-01-209 - Return to INDEX TG-500M CRANE SPECIFICATIONS
TRUCK CRANE TL-250M JAPANESE SPECIFICATIONS. OUTLINE Jib which swings from and stores under the boom NISSAN DIESEL KC-KG520SN TL-250M
TRUCK CRANE TL-250M JAPANESE SPECIFICATIONS TL CARRIER MODEL NISSAN DIESEL KC-KG520SN MITSUBISHI KC-KS305R OUTLINE Jib which swings from and stores under the boom SPEC. NO. TL-250M-5-10101 Control No.
Tilt & Telescopic steering wheel Wheel chair lift switch (option) Acryl type sunvisor Driver solar screen
2x2/ 2x1 Seat arrangement 2 x 2 Seat arrangement INTERIOR Tilt & Telescopic steering wheel Wheel chair lift switch (option) Acryl type sunvisor Driver solar screen Wheel chair space Gradual parking brake
NK-300VR FULLY HYDRAULIC TRUCK CRANE
CRANE Description Model Specification Maximum rated lifting capacity Boom length Fly jib length Maximum lifting height Hoisting line speed ( up) Hoisting hook speed ( up) Main Auxiliary Main Auxiliary
The Hyundai s H100 a quiet revolution in light trucks. Stronger and quieter
HYUNDAI COMMERCIAL The Hyundai s H100 a quiet revolution in light trucks. Take a long look at the Hyundai H100 and prepare to redefine your complete expectations from a light truck. Tough and versatile
Hyundai Heavy Duty Truck. Hyundai Motor Company 231, Yangjae-Dong, Seocho-Gu, Seoul, , Korea GEN.
Hyundai Heavy Duty Truck Hyundai Motor Company 231, Yangjae-Dong, Seocho-Gu, Seoul, 137-938, Korea http://www.hyundai-motor.com GEN. LHD 0804 ENG Move Ahead with Hyundai Today, Hyundai Motor Company enjoys
4 x 4 RIGID. GVW 5,000kg
4 x 4 RIGID GVW 5,000kg ISUZU ELF NPS Introduction All New ISUZU ELF NPS With superb off-road ability, outstanding power and durability, the ISUZU ELF NPS is built to deliver cost-effective operations
Truck Chassis Weights & Dimensions :
Truck Chassis Weights & Dimensions : KERAX 350.34 6X4 HD-WKP GVW Max. Body Length (W) Min. Body Length (W) Total Payload Chassis Cab Weight Front Load Distribution Rear Load Distribution Front Axle Max.
TADANO TRUCK CRANE. Provisional Specifications GENERAL DATA. 4-section, 10.5 m 33.0 m
DATE July, 2006 TADANO TRUCK CRANE MODEL : TL-300E Provisional Specifications GENERAL DATA CRANE CAPACITY 30,000 kg at 3.0 m BOOM 4-section, 10.5 m 33.0 m DIMENSION MASS Overall length approx. 12,670 mm
H D. Euro II. Displacement (cc)
A/C ENGINE General Data Displacement (cc) 2 607 2 607 2 607 Bore x Stroke (mm) 91.1 x 100 91.1 x 100 Compression Ratio 22 : 1 22 : 1 Max. Power (Kw/rpm) 58 @ 3800 58 @ 3800 Max. Torque (Nm/rpm) 167 @ 2200
Hyundai Motor Company 231, Yangjae-Dong, Seocho-Gu, Seoul, , Korea GEN. LHD 0804 ENG
"HMC's total commitment to the customers is helping them to live with confidence." Our constant innovations allow us to inspire our customers and deliver what they want at all times. Hyundai Motor Company
THE RIGHT TRUCK FOR AFRICA
THE RIGHT TRUCK FOR AFRICA STANDARD CAB WIDE CAB DESCRIPTION 1018 FC 1322 4X4 FC 1326 FC 1627 FC LWB 1627 FC LWB AT 1627 FC SLWB ENGINE Make and Model Hino JO5E - TC Hino J08E-YB Hino JO8E - UD J08E-WH
Table of Contents. Boom. Power Jib. Boom. (Stationary on rubber) Boom. (Pick & Carry) Searcher hook. (Option)
Boom Power Jib Boom (Stationary on rubber) Boom (Pick & Carry) Searcher hook (Option) Searcher hook (Stationary on rubber)(option) Searcher hook (Pick & Carry)(Option) Table of Contents SPECIFICATION 1
2010 F-350/F-450/F-550 Super Duty Chassis Cabs
2010 Dimensions sd chassis cabs C J I K A D B E F H G H Body Dimensions REGULAR CAB CHASSIS CAB Series F-350 F-450 F-550 Drive 4x2 4x4 4x2/ 4x4 4x2/ 4x4 4x2/ 4x4 4x2/ 4x4 4x2/ 4x4 4x2/ 4x4 4x2/ 4x4 4x2/
Kato CR-200 Ri. 20 t All Terrain Crane. Tel: Fax:
Kato CR-200 Ri 20 t All Terrain Crane 1565 3165 2965 2245 1665 200 200 1575 350 10 1880 5 13. 350 3210 Min: 6500 Max: 28000 Stroke: 21500 1685 6940 3345 2115 3250 8710 Ramp break over : 23ﾟ When the suspension
4 x specification sheet. 6 Speed Manual. 199kw 16000kg gvm GCM
specification sheet 4 x 2 1627 6 Speed Manual fm65/7f..h 199kw gvm 25000 GCM integrated front underrun protection system Driver s Air Bag hill start ASSIST isri driver s seat 30,000km service intervals
FULLY HYDRAULIC TRUCK CRANE
CRANE Description Model Specification Maximum rated lifting capacity length Fly jib length Maximum lifting height Main Hoisting line winch speed Auxiliary winch Main Hoisting winch speed Auxiliary winch
Table of Contents. Boom. Power Jib. Boom. (Stationary on rubber) Boom. (Pick & Carry) Searcher hook. (Option)
Power Jib (Stationary on rubber) (Pick & Carry) Searcher hook (Option) Searcher hook (Stationary on rubber)(option) Searcher hook (Pick & Carry)(Option) Table of Contents SPECIFICATION 1 Notes for the
THE RIGHT TRUCK FOR AFRICA
THE RIGHT TRUCK FOR AFRICA 614 SWB 614 LWB 714 SWB 714 LWB 714 LWB CREW CAB MASS DATA (KG) A - Front 2300 2300 3100 3100 3100 A - Rear 4360 4360 5100 5100 5100 Approx. body + payload allowance 3390 3315
Hino 500 Wide Cab. Make and Model J08E-WH J08E-WH J08E-WH J08E-WH J08E-WH. 4 Stroke Compression Ignition Yes Yes Yes Yes Yes
WIDE Cab The Right Truck for Africa Engine 1627 Make and Model J08E-WH J08E-WH J08E-WH J08E-WH J08E-WH 4 Stroke Compression Ignition Yes Yes Yes Yes Yes Aspiration Turbo-Intercooled Turbo-Intercooled Turbo-Intercooled
NLR77 E NPR85 K NLR85 E NQR75 L NMR85 H ENGINES 4JH1-TC 4JJ1-TCC 4HK1-TCN NLR77 E NLR85 E, NMR85 H, NPR85 K NQR75 L
NLR77 E (4,200 Kgs) 106 PS Applicable for 10-ft rear body (6,500 Kgs) Applicable for 16-ft rear body NLR85 E (4,490 Kgs) Applicable for 10-ft rear body (8,500 Kgs) 155 PS Applicable for 18-ft rear body
ROUGH TERRAIN CRANE SPECIFICATION. CARRIER Carrier specification Maximum traveling speed 49km/h Grade ability
ROUGH TERRAIN CRANE CRANE Description Rough terrain crane with maximum lifting capacity 13 ton Crane specification 5.3 m 13,000kg 1.7 m (Parts of line : 8) 9.04 m 6,000kg 4.0 m (Parts of line : 4) 12.78
FORD TRUCKS 2533D LR EURO6
FORD TRUCKS 2533D LR EURO6 3120 2540 1500 3800 1320 1330 7950 Basic Features Vehicle Type Light Tipper 6x2 Emission Euro 6 Cabin Type Low Roof Sleeper Cab Wheelbase (mm) 3800 Engine Type Ecotorq 9 liters
ROUGH TERRAIN CRANE SPECIFICATION. Engine. Type. Transmission. Axles. Suspension. Brake system. Steering. Tire size.
ROUGH TERRAIN CRANE CRANE Specifi cation Maximum lifting capacity 70ton 2.5m length (6 section) Fly jib length 8.3m-13.2m (2 section, offset 7 60 ) Maximum rated lifting height 45.5m () 58.6m (jib) Hoisting
F53 Super Duty Motorhome Chassis
F53 Super Duty Dimensions J L K F53 Class A (1) Wheelbase 158.3 178.3 190.3 178.2 190.2 208.2 228.2 208.1 228.1 GVWR (lbs.) 16,000 16,000 16,000 18,000 18,000 18,000 18,000 20,500 20,500 Code Description
FORD TRUCKS 4142M EURO6
FORD TRUCKS 4142M EURO6 3292 2540 1490 2050 3050 1330 940 5100 8860 Basic Features Vehicle Type Mixer Emission Euro 6 Cabin Type 8x4 Day Cab Wheelbase (mm) 5100 Engine Type Ecotorq 12,7 liters Displacement
Dimensions and Capacities. High Roof LWB EL (SRW/DRW) Description A Length / Med. Roof RWB
2016 Dimensions and Capacities BODY DIMENSIONS Van Inches (unless otherwise noted) Configuration EL (SRW/DRW) 237.6 235.5/ 235.5/ 263.9/ Description A Length 219.9 217.8/ 219.9 (1) 237.6 (1) 237.6 (1)
CANTER LIFT FE4-130TF. *Images for illustrative purposes only
CANTER LIFT FE4-130TF *Images for illustrative purposes only Introducing the FUSO CANTER LIFT FE4-130TF Cab With its short-throw gearstick mounted on the dash and its elevated steering column, there s
Annex D Garback Truck Specifications. 9) Cabin: Note: in addition to each manufacturer standard features, the following must be included.
Annex D Garback Truck Specifications A- SOLID WASTE COLLECTION TRUCK WITH COMPACTOR : MIN. 6 m 3 1) Engine: 1.1 4 Cycle, Injection Pump, Water Cooled, Diesel Engine 1.2 No. Of Cylinders : 4 or 6 1.3 Max
MODEL : GT-550EX EURO-2
DATE February, 2007 TADANO TRUCK CRANE MODEL : GT-550EX EURO-2 GENERAL DATA CRANE CAPACITY 55,000 kg at 3.0 m BOOM 5-section, 11.1 m 42.0 m DIMENSION MASS Overall length approx. 13,480 mm Overall width
AUTO GEARBOX Low emissions with a Euro 3 rating provide uncompromised power and fuel economy.
THE HINO 300 SOUTH AFRICA S #1 URBAN TRANSPORT CAB DESIGN The cab* has been completely redesigned for driver comfort, utility and ease of entry and exit. HINO 300 SERIES 614 SWB 614 AT SWB 614 LWB 714
GT-550E. 55 Metric Tons Capacity EURO-2 HYDRAULIC TRUCK CRANE DIMENSION. Spec. sheet No. GT-550E /C-70
GT-550E 55 Metric Tons Capacity EURO-2 HYDRAULIC TRUCK CRANE DIMENSION TAIL SWING R3650 MIN 2390 2720 2820 MID 4600 REAR AXLE CENTER 290 2110 MAX 0 400 5480 MIN. 11100 - MAX. 42000 3 SIDE REFL 2650 SIDE
ROUGH TERRAIN CRANE. Table of contents SPECIFICATION 1 LIFTING CAPACITIES. Stationary on rubber 2 Pick & carry m Boom+10.
ROUGH TERRAIN CRANE Table of contents SPECIFICATION 1 LIFTING CAPACITIES 2 Stationary on rubber 2 Pick & carry 2 17.5m +6.5m SL Jib 3 17.5m +10.25m SL Jib 3 17.5m +14.0m SL Jib 3 32.5m +6.5m SL Jib 5 32.5m
CHAPTER S SERVICE SPECIFICATIONS
1 page INDEX1 SERVICE SPECIFICATIONS S-1 S-6E-16 CHAPTER S SERVICE SPECIFICATIONS TRUCK CHASSIS SPECIFICATIONS... S - 2 REPAIR SPECIFICATIONS... S - 12 METRIC INFORMATION... S - 26 DECIMAL AND METRIC EQUIVALENTS...
SPECIFICATIONS. 13,000 Rear : 11R PR
SPECIFICATIONS HINO 700 Series 8x4, Truck Chassis Spec. No. SS-FY304 Drawing No. CDRFY311 - RHD - 410 PS (Euro-4) - 35.0 ton GVMR RATINGS & AXLE LOAD LIMIT (kg) ( )??Maker design GVM Front Axle Rear Axle
FULLY HYDRAULIC TRUCK CRANE
FULLY HYDRAULIC TRUCK CRANE CRANE Description Model Specification Maximum rated lifting capacity length Fly jib length Maximum lifting height Hoisting line speed Hoisting hook speed Main winch Truck crane
C Front overhang. D Rear overhang. H Front axle to front of body. K Overall height to top of cab, unladen. L Frame height at end of frame, unladen
Gearbox 6S-400OD Wheelbase Cab Drive Vcb 3050 LST LEFT HAND DRIVE WAEE1IA1 3400 LST LEFT HAND DRIVE WAEE1IB1 30/07/007 DIMENSIONS (mm) (35S18W4 LST) A Wheelbase B Overall length C Front overhang D Rear
W3500/W4500 GAS SPECIFICATIONS PAGE
W3500/W4500 GA PAGE 1 PECIFICATION Model W3500 Gas W4500 Gas GVWR 11,050 lb. 14,050 lb. WB Engine Model/Displacement HP (Gross) Torque (Gross) 109 in./132.5 in./150 in./176 in. GMPT 8-cylinder, V Block
Aero Town. Hyundai Motor Company
Aero Town People s expectation toward individual mobility requires more than just a convenient means of transportation. The old understanding of cars has become outdated. A car represents individuals lifestyles,
HIGH-CAPACITY IC PNEUMATIC
HIGH-CAPACITY IC PNEUMATIC REACH NEW HEIGHTS 22000 51000 LBS. SPECIFICATIONS 50-4FD100-135 50-4FDK150-160 4FD150-230 CLASS 5 INTERNAL COMBUSTION ENGINE PNEUMATIC TIRE ToyotaForklift.com HIGH-CAPACITY IC
F53 Super Duty Motorhome Chassis
F53 Super Duty Motorhome Chassis Dimensions J K F53 Class A Motorhome Chassis (1) GVWR 16,000 16,000 16,000 18,000 18,000 18,000 18,000 20,500 20,500 Wheelbase 158.3 178.3 190.3 178.2 190.2 208.2 228.2
KATO KRM-13H. 13 TONNE HYDRAULIC SLEW CRANE Specification
KATO KRM-13H 13 TONNE HYDRAULIC SLEW CRANE Specification Height Length Width Regd Weight TARE 2.845 m 7.375 m 1.995 m 13140 kgs ROUGH TERRAIN CRANE CRANE Description Rough terrain crane with maximum lifting
65C18 (E4) ( EURO 4 )
TECHNICAL DESCRIPTION 6C18 (E4) ( EURO 4 ) The information in this literature is intended to be of a general nature only. Iveco reserves the right to modify or change specification at any time. 1 Gearbox
TMS x 4 & 6 x 6
TMS5 6 x 4 & 6 x 6 Dimensions 8' (2438) TAILSWING 11' 1" (3383) 7' 8" (2337) RET 13' 9-3/4" (4210) MID EXT ' (96) EXT Note: ( ) Reference dimensions in mm 16-3/4" (425) 43' 4" (13 8) OVERALL 10' 10" (32)
ALL TERRAIN CRANE AR-1600M
ALL TERRAIN CRANE AR AR-1600M JAPANESE SPECIFICATIONS CARRIER MODEL FAUN RTF160-5 SPEC. NO. AR-1600M-1-90101 The "fully automatic luffing jib" and the "luffing jib" are optional equipment. Refer to the
SPECIFICATIONS. 6x4, Truck Chassis. Front: 315/80R /153 Rear : 295/80R /150
SPECIFICATIONS HINO 700 Series 6x4, Truck Chassis Spec. No. SS-FS314 Drawing No. CDRFS340 - RHD - 380 PS (Euro-4) - 28.3 ton GVMR RATINGS & AXLE LOAD LIMIT (kg) ( ) Maker design GVM Front Axle Rear Axle
50C15 (E4) ( EURO 4 )
TECHNICAL DESCRIPTION 50C15 (E) ( EURO ) The information in this literature is intended to be of a general nature only. Iveco reserves the right to modify or change specification at any time. 1 50C15 (E)
NPR, NPR HD GAS Specifications. Sequential Port Fuel Injection (SFI), mass 297 HP flow 4,300 RPM meter, powertrain control module (PCM),
NPR, NPR HD GAS Specifications Model NPR Gas NPR HD Gas GVWR GVWR 12,000 12,000 lbs. lbs. 14,500 14,500 lbs. lbs. WB 109 in., 132.5 in., 150 in., 176 in. WB 109 in., 132.5 in., 150 in., 176 in. Engine
C-Series. e-series. Rigid Trucks. Tractor Heads ENGINES CYZ52 EXR52 F CYH52 EXZ52 K 6WG1-TCR EXR52 F, EXZ52 K, CYZ52, CYH52
C-Series Rigid Trucks e-series Tractor Heads CYZ52 (33,000 Kgs) 6x4 (20,000 Kgs) GCM (45,000 Kgs) 4x2 CYH52 (41,000 Kgs) 8x4 (33,000 Kgs) GCM (60,000 Kgs) 6x4 ENGINES 6WG1-TCR Power: Torque: 1,863 N-m
CARRIER : TC CRANE CAPACITY 30,000 kg at 3.0 m
CARRIER : TC-4230 GENERAL DATA CRANE CAPACITY 30,000 kg at 3.0 m BOOM 4-section, 10.5m 33.0m DIMENSION Overall length approx. 12,670 mm Overall width approx. 2,490 mm Overall height approx. 3,450 mm MASS
HYDRAULIC TRUCK CRANE
HYDRAULIC TRUCK CRANE SPEC. SHEET NO. GT-55E-1-12/EX-91 GT-55E CARRIER : TC-4255 GENERAL DATA CRANE CAPACITY 55, kg at 3. m BOOM 5-section, 11.1 m - 42.m DIMENSION Overall length approx. 13,48 mm Overall
35C15V (E4) ( EURO 4 - Transversal leaf )
TECHNICAL DESCRIPTION ( EURO 4 - Transversal leaf ) The information in this literature is intended to be of a general nature only. Iveco reserves the right to modify or change specification at any time.
81% BECAUSE WE ALWAYS KEEP YOU IN MIND. AMT AUTOMATIC DRIVING EXPERIENCE WORLD CLASS COMFORT SAFETY AT ITS BEST
BECAUSE WE ALWAYS KEEP YOU IN MIND. AMT 81% (AUTOMATED MANUAL TRANSMISSION) Market Share in2015 1 2 AUTOMATIC DRIVING EXPERIENCE 3 WORLD CLASS COMFORT with factory-fitted seats and curtains from Japan
FORD TRUCKS 1833 LR EURO6
FORD TRUCKS 1833 LR EURO6 3140 2540 1500 4750 2440 8690 Basic Features Vehicle Type Light Road Truck 4x2 Emission Euro 6 Cabin Type Sleeper Cab Wheelbase (mm) 4750 Engine Type Ecotorq 9 liters Displacement
50C15V (E4) ( EURO 4 )
TECHNICAL DESCRIPTION 50C15V (E) ( EURO ) The information in this literature is intended to be of a general nature only. Iveco reserves the right to modify or change specification at any time. 1 Gearbox
Torque Converter. Lubricant Capacity (L) 2,00 5,7 2,00 2,00 6,1 2,00
ENGINE General Data Displacement (cc) 998 998 998 1 248 1 248 1 248 Bore x Stroke (mm) 71.0 X 84.0 71.0 X 84.0 71.0 X 84.0 71.0 x 78.8 71.0 x 78.8 71.0 x 78.8 Compression Ratio 10.5 : 1 10.5 : 1 10.5 :
GT-550E 55 Metric Tons Capacity
GT-55E 55 Metric Tons Capacity EURO-2 HYDRAULIC TRUCK CRANE Spec. sheet No. GT-55E-1-132/EX-5 DIMENSIONS MIN. 111 - MAX. 42 368 SIDE REFL (RED) 265 CENTER LIGHT 14 o 85 REFL 24 12 o 124 SIDE TURN 39 62
HYDRAULIC TRUCK CRANE
HYDRAULIC TRUCK CRANE SPEC. SHEET NO. GT-55E-1-12/EX-93 GT-55EX CARRIER : TC-4255 GENERAL DATA CRANE CAPACITY 55, kg at 3. m BOOM 5-section, 11.1 m - 42.m DIMENSION Overall length approx. 13,48 mm Overall
New Name on the Horizon
HD 500 TRACTOR Choose with Confidence Once you get behind the wheel of a Hyundai, you'll know the feeling of driving with total confidence. You'll be joining a special club of millions of drivers worldwide
SPECIFICATION. CRANE Specification. CARRIER Specification
CRANE Specification Description Model KATO FULLY HYDRAULIC ALL TERRAIN CRANE KA-1300SL Maximum lifting capacity 130ton 2.5m Boom length 11.8m 52.0m (6 section) SL jib length 9.2m-26.6m ( section) Hoisting
2012 Isuzu Truck. NPR Diesel Specifications. (Vehicle Specifications Index Section NPR Eco-Max Diesel continued on next page) 2012 Isuzu Truck BRAKES
9.1 NPR Diesel Specifications MODEL GVWR WB ENGINE Model/Displacement HP (Gross) Torque (Gross) Equipment TRANSMISSION STEERING FRONT AXLE Suspension GAWR REAR AXLE Suspension GAWR WHEELS TIRES NPR ECO-MAX
2008 LCF. Dimensions FORD LCF. Ford LCF. May 2007
FORD LCF 2008 LCF Dimensions BODY DIMENSIONS Wheelbase Chassis Weights (lbs.) (1),(2) Dimensions Turning Radius Front Rear Total CA CF AF OAL To Curb w/bumper Clearance 115 3915 2382 6298 86 133.5 47.5
MH260E24Y/TN ( CURSOR )
N. : DT 60 00 TECHNICAL DESCRIPTIONS MH60E4Y/TN ( CURSOR ) The information in this literature is intended to be of a general nature only. Iveco reserve the right to modify or change specification at any
Canter 413. fuso.com.au 4X2 / CITY CAB / MANUAL OR DUONIC AMT 3,510KG 7,000KG 96KW/300NM. GVM GCM Power/Torque
Canter 413. 4X2 / CITY CAB / MANUAL OR DUONIC AMT GVM GCM Power/Torque 3,510KG 7,000KG 96KW/300NM Can be driven on a passenger car licence CLASS LEADING TARE WEIGHT AND 30,000KM SERVICE INTERVALS fuso.com.au
2008 F53 Motorhome Chassis
2008 F53 Dimensions F53 MOTORHOME CHASSIS F53 Class A Wheelbase 158.0 178.0 190.0 208.0 GVWR 16,000 15,700 18,000 15,700 18,000 18,000 20,500 22,000 Code Description Inches Inches Inches Inches Inches
F53 Super Duty Motorhome Chassis
F53 Super Duty Dimensions 2014 J L K F53 Class A (1) GVWR (lbs.) 16,000 16,000 16,000 18,000 18,000 18,000 18,000 20,500 20,500 Wheelbase 158.3 178.3 190.3 178.2 190.2 208.2 228.2 208.1 228.1 Code Description
35S12 (E4) ( EURO 4 )
TECHNICAL DESCRIPTION 5S (E4) ( EURO 4 ) The information in this literature is intended to be of a general nature only. Iveco reserves the right to modify or change specification at any time. 5S (E4) Gearbox
7 - S E R I E S P N E U M A T I C 3, ,5 0 0 L B S S P E C I F I C A T I O N S
7 - S E R I E S P N E U M A T I C 3, 0 0 0 -,5 0 0 L B S S P E C I F I C A T I O N S SAFETY CARB/EPA certified engine with 3-way Key lowering interlock Electric horn closed loop catalytic muffler system
2008 F-350/F-450/F-550 Super Duty Chassis Cabs Dimensions
SD CHASSIS CABS 2008 Dimensions C J I K A D B E F H G H Body Dimensions REGULAR CAB CHASSIS CAB Series F-350 F-450 F-550 Drive 4x2 4x4 4x2/ 4x4 4x2/ 4x4 4x2/ 4x4 4x2/ 4x4 4x2/ 4x4 4x2/ 4x4 4x2/ 4x4 4x2/
TADANO ROUGH TERRAIN CRANE : GR-300EX. (Left-hand steering) GENERAL DATA. BOOM 4-section, 9.7 m m
TADANO ROUGH TERRAIN CRANE MODEL : GR-300EX (Left-hand steering) GENERAL DATA CRANE CAPACITY 30,000 kg at 3.0 m BOOM 4-section, 9.7 m - 31.0 m DIMENSION MASS Overall length approx. 11,245 mm Overall width
35C15 (E4) ( EURO 4 - Torsion bar )
TECHNICAL DESCRIPTION 5C5 (E4) ( EURO 4 - Torsion bar ) The information in this literature is intended to be of a general nature only. Iveco reserves the right to modify or change specification at any
TECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION MAN D2066 LUH32 (E5) VOITH DIWA.5 2016. Technical specification IK 206 (E5) A [mm] B [mm] C [mm] D [mm] E [mm] M [mm] F [mm] G [mm] H [mm] J [mm] K [ ] L [ ] 17997 2500 3300 3056
Motorcycle - Specifications
Motorcycle - Specifications Model Name FZ400R Model Code 46X0 Model Year 1985 Destination JAPAN Section/Item Chassis Maintenance Specification (Chassis) Chassis Frame type Double cradle Caster angle 26.00
35C12 (E4) ( EURO 4 - Transversal leaf )
TECHNICAL DESCRIPTION 35C (E) ( EURO - Transversal leaf ) The information in this literature is intended to be of a general nature only. Iveco reserves the right to modify or change specification at any
CORE IC PNEUMATIC SPECIFICATIONS LBS. REACH NEW HEIGHTS CLASS 8FGU FDU15-32 INTERNAL COMBUSTION ENGINE PNEUMATIC TIRE
CORE IC PNEUMATIC 3000 6500 LBS. REACH NEW HEIGHTS SPECIFICATIONS 8FGU15-32 8FDU15-32 CLASS 5 INTERNAL COMBUSTION ENGINE PNEUMATIC TIRE ToyotaForklift.com CORE IC PNEUMATIC CAPACITY 3000 6500 LBS. MAXIMUM
65C15D TECHNICAL DESCRIPTION. ( Torsion bar ) N. : A4HB6DT1
TECHNICAL DESCRIPTION ( Torsion bar ) The information in this literature is intended to be of a general nature only. Iveco reserve the right to modify or change specification at any time. 1 Gearbox S6-300
ALL TERRAIN CRANE GA-700N
ALL TERRAIN CRANE GA GA-7N JAPANESE SPECIFICATIONS CARRIER MODEL NISSAN KL-AU552WN SPEC. NO. GA-7N-1-112 Control No. GA-7N-1-112 / JA-2-1 - GA-7N-1-112/JA-2 GA-7N CRANE SPECIFICATIONS CRANE CAPACITY 11.5m
DL250TC TECHNICAL DATA
DL250TC TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL ea. Doosan DL06 NUMBER OF CYLINDERS ea. 6 RATED FLYWHEEL POWER hp / rpm 163 / 2,100 (GROSS) (SAE J1995) kw / rpm 121 / 2,100 RATED
ROUGH TERRAIN CRANE TR-500M
ROUGH TERRAIN CRANE TR-500M JAPANESE SPECIFICATIONS TR OUTLINE 6-section Boom, 2-staged Power Tilt Jib H-type Outrigger SPEC. NO. TR-500M-3-00113 Control No. JA-02 327 TR-500M CRANE SPECIFICATIONS CRANE
ROUGH TERRAIN CRANE GR-160N
ROUGH TERRAIN CRANE GR-160N JAPANESE SPECIFICATIONS OUTLINE H-type Outrigger SPEC. NO. Control No. JA-01 GR-160N 1. Crane Specifications Crane Crane Capacity 6.5 m boom 16,000 kg x 3.0 m (6-part line)
New 2019 Ram 1500 SPECIFICATIONS
New 2019 Ram 1500 SPECIFICATIONS Specifications are based on the latest product information available at the time of publication. All dimensions are in inches (millimeters) unless otherwise noted. All
TOUGH NATURE, SMART PERSONALITY
The information and images contained herein are for guide purposes only. IVECO reserves the right to make changes for manufacturing and commercial reasons at any time. www.iveco.com TOUGH NATURE, SMART
2013 Model Year NPR Diesel Specifications
2013 Model Year NPR Diesel Specifications 9.1 MODEL GVWR WB ENGINE Model/Displacement HP (Gross) Torque (Gross) Equipment TRANSMISSION STEERING FRONT AXLE Suspension GAWR REAR AXLE Suspension GAWR WHEELS
2500 SERIES. 98% Customer Loyalty Rating. #1 Selling Tractor in the World 7-year Limited Powertrain Warranty DEMING PRIZE 2003
2500 SERIES #1 Selling Tractor in the World 7-year Limited Powertrain Warranty 98% Customer Loyalty Rating DEMING PRIZE 2003 JAPAN QUALITY MEDAL 2007 ECONOMY - 2500 Series Economical and easy to operate
ALL TERRAIN CRANE GA-1000N
ALL TERRAIN CRANE GA GA-N JAPANESE SPECIFICATIONS CARRIER MODEL FAUN RTF11-4 SPEC. NO. GA-N-1-912 Control No. JA-2 35 GA-N-1-912 GA-N CRANE SPECIFICATIONS CRANE CAPACITY 12.2m Boom,kg at 2.8m (13part-line)
ISUZU N-SERIES (REG CAB) DIESEL CAB/CHASSIS SPECS NPR-HD (14,500# GVWR)
MODEL YEAR 2017 MANUFACTURER ISUZU MODEL NPR-HD (diesel) GVWR 14,500# *Optional Wheelbases WHEELBASE 109.0 132.5 * 150.0 * 176.0 * CA DIMENSION 86.5 110.0 127.5 153.5 BOC DIMENSION 7.7 7.7 10.2 10.2 USABLE
POWER DAILY MINIBUS A EURO 3
POWER DAILY MINIBUS A 50.13 EURO 3 TECHNICAL DOCUMENTATION 1 Power Daily MINIBUS A50.13 Euro 3 Dimensions (mm) A Maximum Length 7.133 H Overall Height 2.875 B Overall Withdraw 2.000 Weights (kg) G.V.M
ROUGH TERRAIN CRANE TR-500M
TR ROUGH TERRAIN CRANE TR-500M JAPANESE SPECIFICATIONS OUTLINE 6-section Boom, 2-staged Power Tilt Jib X-type Outrigger SPEC. NO. TR-500M-3-00101 Control No. JA-03-35 - Return to INDEX TR-500M CRANE SPECIFICATIONS
Doosan Infracore DX55W TECHNICAL DATA
Doosan Infracore Construction Equipment DX55W TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL Yanmar 4TNV98-E NUMBER OF CYLINDERS 4 RATED FLYWHEEL POWER hp / rpm 56.8 / 2,400 (hp PER SAE
5TH CATEGORY - HISTORIC RACING. GROUP Sb APPROVED VEHICLE SPECIFICATION
5TH CATEGORY - HISTORIC RACING GROUP Sb APPROVED VEHICLE SPECIFICATION This form details the approved specifications of individual vehicle models in the 5th Category Historic car group. To be issued with
ALL TERRAIN CRANE GA-1500N
ALL TERRAIN CRANE GA GA-1500N JAPANESE SPECIFICATIONS CARRIER MODEL FAUN RTF120-5 SPEC. NO. GA-1500N-1-90101 Control No. GA-1500N-1-90101 / JA-03-1 - CRANE CAPACITY 12.6m Boom 150,000kg at 2.7m (21part-line,
ROUGH TERRAIN CRANE TR-250M
TR ROUGH TERRAIN CRANE TR-250M JAPANESE SPECIFICATIONS OUTLINE 4-section Boom, 2-staged Power Tilt Jib X-type Outrigger SPEC. NO. TR-250M-6-00101 Control No. JA-02-61 - Return to INDEX TR-250M CRANE SPECIFICATIONS