M23 and M40 CONNECTORS. featuring FlexGrip and RockSolid Technology SETTINGYOURWORLDINMOTION

Transcription

1 M and M0 CONNECTORS featuring FlexGrip and RockSolid Technology SETTINGYOURWORLDINMOTION

2 MotionGrade M and M0 Connectors Amphenol Sine Systems MotionGrade M and M0 Connector Systems are designed to excel in performance and reliability in our customers most demanding environments. Our innovations and experience as an industry leader in connector technology and total interconnect solutions allow us to offer such features as our FlexGrip Backshell System and RockSolid Contacts. These and other features combined with a simplistic design approach reduce initial procurement and assembly cost, while ensuring compatibility to all other existing standard layouts. Amphenol s MotionGrade M and M0 products are ideally suited for advanced servo drive encoder feedback applications, packaging, robotic, printing, machine tool, medical and automation environments where control signal transmission or power are required in a robust and compact delivery system. TECHNICAL DATA M A Series M B SERIES M0 C SERIES TEMPERATURE RANGE -0 C to +0 C -0 C to +0 C -0 C to +0 C PROTECTION IP 67 (Plugged condition) IP 67 (Plugged condition) IP 67 (Plugged condition) DATA ACCORDING TO UL 80 M A Series M B SERIES M0 C SERIES DEGREE OF PROTECTION OVER VOLTAGE CATEGORY III III III MATERIALS M A Series M B SERIES M0 C SERIES HOUSING BODY Zinc Die-cast Zinc Die-cast Zinc Die-cast COUPLING NUT Brass, Nickel-plated Brass, Nickel-plated Brass, Nickel-plated INSULATION INSERTS PA66, UL 9 / V0 PA66, UL 9 / V0 PA66 / PBT, UL 9 / V0 CONTACTS Brass, Gold-plated Brass, Gold-plated Brass, Gold-plated SEALS DuPont Viton DuPont Viton DuPont Viton ELECTRICAL DATA M A Series CONTACT CONNECTOR M B SERIES POWER CONTACTS M0 C SERIES POWER CONTACTS MAX. CURRENT (MAX. WIRE GAUGE) Max. 0A Max. 8A (6 contacts) Max. 0A (8 & 9 contacts) Max. 75A MAXIMUM VOLTAGE 60V AC/DC 60V AC/DC 60V AC/DC CONTACT RESISTENCE < 5 m < m < m TEST VOLTAGE (BETWEEN CONTACTS) 500V 6000V 6000V MINIMUM MATING CYCLES > 50 > 50 > 50 M A Series 7 CONTACT CONNECTOR M B SERIES SIGNAL CONTACTS (8-, 9 CONTACTS) M0 C SERIES SIGNAL CONTACTS MAX. CURRENT (MAX. WIRE GAUGE) Max. 9A Max. 0A Max. 0A TEST VOLTAGE (BETWEEN CONTACTS) 500V 500V 000V MAXIMUM VOLTAGE 5V AC/DC 50V AC/DC 50V AC/DC CONTACT RESISTENCE < 5 m < 5 m < m MINIMUM MATING CYCLES > 50 > 50 > 50 Introduction

3 Features and Bene ts FEATURES BENEFITS LOWEST INSTALLED COST SUPERIOR SHIELDING ASSEMBLY/DISASSEMBLY CABLE STRAIN RELIEF FLUID RESISTANCE and SEALING CONTACTS By providing enhanced performance and advancements to existing standard systems with improvements such as our FlexGrip design, these cost conscious innovations will increase the reliability & performance of one of the most dependable interconnect offerings available today. First quality components coupled with a simplistic design provide maximum EMI/RFI shielding capabilities while reducing assembly preparation times. Overall design construction allows for one step process of contact extraction versus complete connector disassembly found within other brands. An integrated contact locking system ensures ease of use and de nitive contact integrity upon insertion. Your choice of either the innovative design features of FlexGrip or traditional cable strain relieving similar to existing standard systems. In combination with our strain relief systems, Amphenol utilizes advanced sealing technologies & materials to ensure highest reliability when subjected to the harshest environments. By creating a 60 degree mating surface around the pin, Amphenol s RockSolid contact offering ensures longer contact life, lower contact resistance, immunizes against shock and vibration all while maintaining low insertion and extraction forces. Additionally, industry standard contacts are also available made with gold plated surfaces and high quality CuZn alloys. RoHS COMPLIANT All materials meet the requirements of the European Directive 00/95/EC, Issue..00. RoHS ADD L APPROVALS C US D V E ISO 900/000 Two-Piece Clamping System/Compression Ribs Ensures secure gripping of cable jacket material to connector housing. Simpli ed shielding process. Cable In Potting Access Point Allows access to the potting cavity which ensures additional mechanical strength, electrical insulation, and vibration/shock resistance. FlexGrip Backshell System FlexGrip Backshells come in various sizes,ranging from 8.5mm - 8.5mm. FlexGrip Backshells must be potted to achieve IP 67 ratings. Note: Industry standard strain relief/cord grip options, achieving IP67 ratings, are also available. [+] Longer contact life [+] Lower contact resistence [+] Immunity to shock and vibration [+] Low insertion and extraction forces [+] Contact area extends 60 around pins Note: Industry standard contacts are also available. Features and Bene ts

4 Insert Arrangements M A Series (Face view: CW - clockwise, CCW - counter clockwise) pos E Type (CW) 7pos E Type (CW) pos P Type (CCW) 7pos P Type (CCW) E E P P Contact Size Legend.6mm.0mm.0mm M B Series (Face view of socket insert) 6pos 8pos 9pos M0 C Series (Face view of socket insert) 6pos 8pos 6 5 D A C B D C E G F H B L A + U - W + U V - W Coding Keys F E G R P S CW E (viewed from mating face of insert) CCW P ALL M A SERIES INSERTS COME WITH CODING KEYS. To order the connector with the correct insert coding, change the 6th digit in the catalog part number per the coding letter desired (see gure above). Examples: MACAE00 for E coding, MACAF00 for F coding, MACAG00 for G coding MACAP00 for P coding, MACAR00 for R coding, MACAS00 for S coding If you are ordering an E type connector, coding options are only: E, F & G. Normal coding is identi ed as E. If you are odering a P type connector, coding options are only: P, R & S. Normal coding is identi ed as P. General Speci cations

5 M Signal Solutions - A Series M A Series (Face view: CW - clockwise, CCW - counter clockwise) Contact Size Legend.0mm.0mm pos E Type (CW) pos P Type (CCW) 7pos E Type (CW) 7pos P Type (CCW) E P E P Plugs (Less contacts) Rotatable 90 Plugs (Less contacts) 8.mm 5.8mm 5.9mm 5.8mm 5mm 0.5mm INSERT TYPE E P 7E 7P MACAE00 MACAP00 MACAE700 MACAP700 Straight Receptacles (Less contacts) INSERT TYPE E P 7E 7P MAEAE00 MAEAP00 MAEAE700 MAEAP700 Rotatable 90 Receptacles (Less contacts) 7.5mm 5.6mm 5 mm 5. mm 5.6mm 6mm.5 mm 0 mm 0 mm 9.8 mm M.5 mm 9.8 mm M.5 mm 9.8 mm Mounting Holes 9.8 mm Mounting Holes INSERT TYPE E P 7E 7P MALAE00 MALAP00 MALAE700 MALAP700 INSERT TYPE E P 7E 7P MARAE00 MARAP00 MARAE700 MARAP700 Pins Sockets Extensions (Less contacts) 7.9mm Ø5.mm SC00005 SC0000 SC0000 CONTACT SIZE CONTACT SIZE.0mm.0mm.0mm TYPE TYPE INSERT TYPE E P 7E 7P MAJAE00 MAJAP00 MAJAE700 MAJAP700 Machined RockSolid Slit Machined CRIMP BARREL (MAX) CRIMP BARREL (MAX).0mm (8 GA).0mm (8 GA).0mm (8 GA) EXTRACTION TOOL EXTRACTION TOOL Plugs, Receptacles & Extensions accept Pins or Sockets For information on RockSolid, please refer to page M Signal

6 5 M Power Solutions - B Series M B Series (Face view of socket insert) Contact Size Legend.0mm.0mm 6pos 8pos 9pos D C C B 6 B D G A 5 A E F H L Plugs (Less contacts) Rotatable 90 Plugs (Less contacts) 7.8mm Ø7mm 60.6mm Ø7mm 5mm 0.5mm INSERT TYPE 6pos 8pos 9pos INSERT TYPE 6pos 8pos 9pos MBCKN0600 MBCKN0800 MBCKN0900 MBEJN0600 MBEJN0800 MBEJN0900 Straight Receptacles (Less contacts) Rotatable 90 Receptacles (Less contacts) 5.mm 5.7mm 5.mm 57mm 5.7mm.5mm 8.mm Ø0mm Ø0mm 9.8mm M.5mm 9.8mm M.5mm 9.8mm Mounting Holes 9.8mm Mounting Holes INSERT TYPE 6pos 8pos 9pos MBLLN0600 MBLLN0800 MBLLN0900 INSERT TYPE 6pos 8pos 9pos MBRJN0600 MBRJN0800 MBRJN0900 Pins Sockets Extensions (Less contacts).8mm 5mm SC00005 SC00006 SC0000 SC0000 SC0000 SC00005 CONTACT SIZE CONTACT SIZE.0mm.0mm.0mm.0mm.0mm.0mm TYPE TYPE INSERT TYPE 6pos 8pos 9pos MBJJN0600 MBJJN0800 MBJJN0900 Machined Machined RockSolid Slit Machined RockSolid Slit Machined CRIMP BARREL (MAX) CRIMP BARREL (MAX).0mm (8 GA).5mm ( GA) EXTRACTION TOOL.0mm (8 GA).0mm (8 GA).5mm ( GA) EXTRACTION TOOL.5mm ( GA) Plugs accept Sockets only Receptacles & Extensions accept Pins only For information on RockSolid, please refer to page M Power

7 6 M0 Power Solutions - C Series M0 C Series (Face view of socket insert) Contact Size Legend.0mm.6mm 6pos 8pos + U - W + U V - W Plugs (Less contacts) Fixed 90 Receptacles (Less contacts) 5.7mm 0mm 5mm Ø5.5mm.5mm 55mm Ømm INSERT TYPE 6pos 8pos Mmm MCCJN0600 MCCJN0800 Straight Receptacles (Less contacts) 0mm 0mm Mounting Holes mm Ø5mm INSERT TYPE 6pos 8pos MCNJN0600 MCNJN0800 Ø5mm Extensions (Less contacts) Ømm 6mm Ø5mm 0mm Mmm 0mm Mounting Holes INSERT TYPE 6pos 8pos MCLKN0600 MCLKN0800 Pins Sockets INSERT TYPE 6pos 8pos MCJJN0600 MCJJN0800 SC00000 SC0000 SC0000 SC00005 SC00009 SC00006 CONTACT SIZE CONTACT SIZE [+] Longer contact life [+] Lower contact resistence [+] Immunity to shock and vibration [+] Low insertion and extraction forces [+] Contact area extends 60 around pins.0mm.6mm.0mm.0mm.6mm.6mm TYPE TYPE Machined Machined RockSolid Slit Machined RockSolid Slit Machined CRIMP BARREL (MAX) CRIMP BARREL (MAX).5mm ( GA) 0.0mm (8 GA) EXTRACTION TOOL.5mm ( GA).5mm ( GA) 0.0mm (8 GA) EXTRACTION TOOL 0.0mm (8 GA) Plugs accept Sockets only Receptacles & Extensions accept Pins only M0 Power

8 7 FlexGrip Backshells For more information on FlexGrip technology, refer to page. Note: FlexGrip Backshells must be potted to achieve IP 67 ratings. Flexible Strain Relief M A SERIES MAFSR-A8.5 EXIT DIAMETER 8.5mm Ø5.mm 68.5mm EXIT DIAMETER MAFSR-A0.5 MAFSR-A.8 0.5mm.8mm.5mm *Consult factory for additional sizes. M B SERIES 68.5mm EXIT DIAMETER MBFSR-B0. MBFSR-B.5 0.mm.5mm Ø6.5mm EXIT DIAMETER MBFSR-B.5 MBFSR-B7.5mm 7mm.5mm *Consult factory for additional sizes. M0 C SERIES 6.mm EXIT DIAMETER 0mm ACROSS FLATS EXIT DIAMETER MCFSR-C mm 76.5mm *Consult factory for additional sizes. M and M0 Backshells Options

9 8 Cord Grips - Traditional Note: Meets IP 67 ratings M A SERIES CABLE RANGE MACG-S MACG-S.5~7.5mm 7.5~0mm.8 ACROSS FLATS Ø6.5 MACG-S MACG-S 0~.5mm.5~5mm.0 ACROSS FLATS *Consult factory for additional sizes. M B SERIES CABLE RANGE MBCG-S MBCG-S 7.5~0mm 0~.5mm.8 ACROSS FLATS Ø6.5 MBCG-S MBCG-S.5~5mm.5~7mm.0 ACROSS FLATS *Consult factory for additional sizes. M0 C SERIES CABLE RANGE 6.5 Ø.5 MCCG-S 9~.5mm MCCG-S MCCG-S.5~5mm.5~7mm.8 ACROSS FLATS 8.0 ACROSS FLATS MCCG-S MCCG-S5 7~9.5mm 9~.5mm 6.0 MCCG-S6.5~mm Ø ACROSS FLATS MCCG-S7.5~6mm *Consult factory for additional sizes. M and M0 Backshells Options

10 9 Derating Curve The Derating Curve depicts a safe operating zone in which amperage and ambient temperature are the factors. This curve on the chart is an 80% reduction of the current-carrying capacity curve. The current-carrying capacity curve is determined from tests in which the mated connectors are subjected to different levels of current. At these levels of current, the temperature of the hottest spot of the mated connector and the temperature inside the test enclosure are recorded. Using this data, plugged into a formula, points are plotted on a chart. When the points are connected, the completed curve is the current-carrying capacity curve. I BASE CURVE CORRECTED CURVE Upper current limit set by external factors (i.e. wire section) PERMISSABLE OPERATING RANGE t u Derating Curve

11 0 Catalogs To view the full line of Amphenol Sine Systems products and/or to request a catalog, please visit our website at Catalogs

12 NORTH AMERICA Amphenol Sine Systems MICHIGAN 7 Morley Drive Clinton Township, MI 806 Toll-Free: Fax: sine_info@sineco.com Amphenol Medical Solutions info@sineco.com Amphenol Sine Systems FLORIDA P.O. Box 0 50 Highway 7 Lake Wales, Florida 859 Phone: Fax: sine_info@sineco.com Amphenol Factory Automation inquiries@amphenolfactoryautomation.com Amphenol Industrial Operations 0-60 Delaware Avenue Sidney, NY 88 Phone: Fax: EUROPE Amphenol Air LB SAS 9, voie d Yvois F-080 Blagny, France Phone: Fax: g.dardenne@amphenol-airlb.fr Amphenol AIR LB GmbH Am Kleinbahnhof Saarlouis D-6670, Germany Phone: Fax: info@amphenol-airlb.de Amphenol BENELUX Zadelmaker NL-0 PD Alphen aan den Rijn Holland Phone: Mobile: Fax: s.duin@amphenol-nl.com Amphenol LIMITED Thanet Way, Whitstable, Kent United Kingdom, CT JF Phone: Fax: Amphenol ITALIA Via Barbaiana Lainate, Milano, Italy Phone: Mobile: Fax: r.buscone@amphenol-it.com Amphenol CENTER EAST EUROPE, POLAND and AUSTRIA Wiener Gasse Perchtoldsdorf, Austria Phone: Fax: christian@czesch.at Amphenol ESPANA Edi cio Burgosol, O cina N 55 C/Comunidad de Madrid, 5 bis Las Rozas (Madrid), 80 Phone: Mobile: Fax: e.bendix@amphenol-it.com Amphenol SOCAPEX S.A.S. 98, Promenade de l Arve - BP 9 7 Thyez CEDEX, France Phone: (0) Fax: (0) Amphenol NORDIC Appelboms vag SE-86 Vallentuna, Sweden Phone: Fax: fredrik.weden@amphenol-socapex.fr SOUTH EASTERN EUROPE Phone: (0) Mobile: (0) jocelyne.anthoine@amphenol-socapex.fr ASIA Amphenol Sine Systems CHINA Xiamen, Fujian, China Phone: Mobile: Fax: cindy.zhao@xm.assembletech.com Amphenol INTERCONNECT INDIA PRIVATE LTD 05 Bhosari Industrial Area Pune 06, India Phone: /06/055 Fax: Amphenol DAESHIN 558. Songnae- Dong. SoSa-Gu Bucheon City, Gyeonggi-do, Korea -88 Phone: Fax: info@amphenol.co.kr Amphenol JAPAN 689-, Iseochi, Ritto-shi Shiga 50-0 Japan Phone: Fax: OTHER LOCATIONS Amphenol MEXICO Prolongacion Reforma 6-6 B Col. Paseo de las Lomas Mexico, DF 00 Phone: Fax: Amphenol ARGENTINA Av. Callao 90 do piso O cina B Plaza C0, AAP Buenos Aires, Argentina Phone: Fax: Amphenol DO BRASIL LTDA Rua Diogo Moreira,, 0 Andar CEP:05-0 Sao Paulo SP, Brazil Phone: Fax: Amphenol SOUTH AFRICA 0 Impala Road 96 Chislehurston, Sandton South Africa Phone: Fax: Amphenol AUSTRALIA PTY LIMITED Fiveways Blvd., Keysborough Victoria 7 Melbourne, Australia Phone: Fax: Amphenol TURKEY Beybi Giz Plaza, Kat: 6 96 Maslak Istanbul, Turkey Phone: Fax: Amphenol BAR TEC LTD Hagavish St., PO Box 79 Kfar Saba 0, Israel Phone: Fax: Amphenol RUSSIA 8 Bldg., Yaroslavskaja Street 96 Moscow, Russia Phone: Fax: Amphenol Sine Systems has made every effort to ensure that the information contained in this catalog is accurate at the time of publication. Speci cations or information stated in this publication are subject to change without notice.