Data Sheet P4055 Pressure Transducer

Transcription

1 Data Sheet P4055 Pressure Transducer Main Features Pressure Ranges Electrical Connection Pressure Connection Housing Material Output Signal 0 to 3 up to 0 to 300 PSI Packard Electric Metri-Pack 150 Series 1/4-18 NPT (external), 1/8-27 NPT (external) - for more options see how to order Brass VDC Attributes Small Size Absolute, Gage or Sealed Gage Pressure References Packard Metri-Pack 150 Electrical Connector Standard 0.5 to 4.5 Vdc Output High Vibration Tolerance Superior EMI/RFI Performance Available with NPT, G1/4, M10, & M12 Pressure Ports Temperature Compensated RoHS Compliant Typical Applications Pumps & Compressors Process Controls Filter Restriction Oil and Fuel Pressures Water Management Level Measurement Test & Monitoring Equipment Description The P4055 Pressure Transducer incorporate a back-side PRT configuration that is compatible with many types of liquid and gaseous media. This flexible product family can be supplied with a built in Metri-Pack 150 electrical connector. The small sensor size is ideal for high volume applications. Pressure ranges may be customized for OEM applications. The P4055 is specified with pressure ranges measured in PSI.

2 Technical Specifications Pressure Ranges from 0 to PSI Proof pressure PSI Burst pressure PSI Physical Operating Life Cycle min. 10 million full pressure cycles over the full range Vibration Resistance 10 G s peak to peak sinusoidal, from 20 to 2000 Hz Shock Resistance 75 G s ½ sine wave Drop Test 1m onto concrete surface Weight 50 grams Ingress Protection IP67 Operating Temperature -40 C to C Environmental Temperature -40 C to C Storage Temperature -40 C to C Media All class II fluids and gases compatible with brass and fluorosilicone Performance Total error band 1 +/-2% of span (-20 T 100 C) +/-3% of span (T < -20 C,T < 100 C) 1. Including accuracy, calibration, temperature, non-linearity, hysteresis, non-repeatability, error Data Sheet P4055 2

3 Electrical Output Signal VDC ratiometric Operating Supply Signal 5 VDC ± 5% Power Consumption 25 mw Overvoltage Protection 16 VDC Short-circuit Proofness Yes * 2 Insulation Voltage 500 VDC Reverse Polarity Protection Yes * 3 Impedance Min load 25 kω Response Time 10 ms max. to 63% of full scale pressure with step change on input 2. for min. 3 intervals at 5 minutes each 3. for min. 10 seconds on assigned pins Approvals & Certificates CE Compliance ROHS Pressure equipment directive 97/23/EC EMC directive 2004/108/EEC, EN Emission (Group 1, Class B) and Immunity (industrial locations), EMI, ESD protected 2002/95/EC RoHS Directive Data Sheet P4055 3

4 Dimensions Pressure Sensor with Electrical Connection Dimensions in mm [Inch] Packard (metri-pack 150) Pin Call Outs Output Pin A Pin B Pin C VDC ratiometric GND Vsup Vout Data Sheet P4055 4

5 How to Order Reference A Absolute G Gauge S Sealed Gauge Internal Seal Material E Fluorosilicone Built-in Connector A Metripack 150 with mating connector 12 leads C Metripack 150 without mating connector P A E 1 A Pressure Ranges PSI PSI PSI PSI PSI PSI PSI PSI PSI PSI PSI Pressure Connection (port) 1 1/4-18 NPT 2 M12 X 1.5-6g PER ISO M10 X 1-6g PER ISO /8-27 NPTF 5 STUD END PER DIN 3852-A-G1/4 (sealing by washer, not supplied) 6 M14 X 1.5-6g PER ISO STUD END PER DIN 3852-C-R1/4 (1/4-19 BSPT) 8 7/16-20UNF-2A 9 M16 X 1.5-6g 10 STUD END PER DIN 3852-C-R1/8 (1/8-28 BSPT) Example: P A-E1A Description: P4055 Pressure Sensor, 0 15 PSI Absolute, Fluorosolicone, Internal Seal, 1/4-18 NPT, Pressure Connection with Packard, Metri-Pack 150 Built-in Connector Before installation and operation, ensure that the appropriate pressure sensor has been selected in terms of pressure range, design and specific measuring conditions. Non-compliance can result in serious injury and/or damage to the equipment. Warning: The product information contained in this catalogue is given purely as information and does not constitute a representation, warranty or any form of contractual commitment. Kavlico reserve the right to modify their products without notice. It is imperative that we should be consulted over any particular use or application of our products and it is the responsibility of the buyer to establish, particularly through all the appropriate tests, that the product is suitable for the use or application. Under no circumstances will our warranty apply, nor shall we be held responsible for any application (such as any modification, addition, deletion, use in conjunction with other electrical or electronic components, circuits or assemblies, or any other unsuitable material or substance) which has not been expressly agreed by us prior to the sale of our products. Data Sheet P4055 5

6 Sales Offices Worldwide Main Contact Americas Brazil Mexico USA Sensata Germany GmbH Potsdamer Strasse 14, Minden Tel: Fax: Europe England France Germany Italy Netherlands Spain Sweden Russia 2016 Kavlico, a brand of Sensata Technologies. All rights reserved. Kavlico s General Terms & Conditions apply and can be found on our website. Asia Pacific China India Japan South Korea Your local sales contact: Ref.: DS_PR_EN_LT_JUL 2016 I Creation-Design: Kavlico - Photos: Oliver Windus, Fotodesign