PROJECT DESIGN SEGMENT KENNEDY 69/13KV SUBSTATION SWITCHGEAR AND STATION SERVICE REPLACEMENT SAMPLE SCHEDULE OF VALUES

Transcription

1 PROJECT DESIGN SEGMENT SWITCHGEAR AND STATION SERVICE REPLACEMENT SAMPLE SCHEDULE OF VALUES GENERAL NOTES: 1. THE SHALL CREATE AND SUBMIT SIX (6) COPIES OF A SCHEDULE OF VALUES TO THE PROJECT REPRESENTATIVE AT THE TIME OF PRE-CONSTRUCTION CONFERENCE. THE PROJECT REPRESENTATIVE SHALL REVIEW AND APPROVE THE SCHEDULE OF VALUES, BASED UPON THE REASONABLE APPORTIONMENT OF COSTS TO THE VARIOUS ELEMENTS OF THE WORK IN PLACE. 2. THE SCHEDULE OF VALUES SHALL BE THE JEA S MEANS OF ADMINSTERING PAYMENT FOR WORK IN PLACE UNDER THIS CONTRACT. EACH INVOICE FROM THE SHALL CONTAIN THE INFORMATION SHOWN IN THE FORTHCOMING TABLE TO INDICATE WORK COMPLETED AND PAYBLE DURING EACH MONTHLY BILLING PERIOD, AS WELL AS INDICATING PAST AND REMAINING WORK. INVOICES SUBMITTED WITHOUT AN ACCEPTED, COMPLETED SCHEDULE OF VALUES SHALL BE RETURNED UNPAID. 3. THE ITEMS LISTED IN THIS SCHEDULE OF VALUES ARE SAMPLE ITEMS ONLY; THEY ARE NOT INTENDED TO BE COMPLETE AND ARE PROVIDED ONLY TO INDICATE THE LEVEL OF DETAIL REQUIRED. THE SHALL FORMULATE A DETAILED LIST OF ITEMS THAT ARE SPECIFIC TO THE WORK OF THIS CONTRACT. 4. AN ELECTRONIC COPY OF THIS DOCUMENT IS AVAILABLE VIA ELECTRONIC MAIL BY COPYING THE FILE ADDRESS LISTED BELOW INTO AN ELECTRONIC MAIL, AND SENDING THE ELECTRONIC MAIL REQUEST TO THE PROJECT ENGINEER. THE PROJECT ENGINEER S ADDRESS IS LISTED IN SECTION VII OF THIS SPECIFICATION. FILE: - SAMPLE SCHEDULE OF VALUES.DOCX PAGE: 1 OF 3

2 1. MOBILIZATION ITEM SCHEDULE DESCRIPTION LABOR ($) MATERIAL ($) SAMPLE SCHEDULE OF VALUES PERCENT COMPLETE LABOR (%) MATERI AL (%) LABOR ($) AMOUNT EARNED TO DATE MATERIAL ($) TOTAL ($) PAGE.: 2 OF 3 Previously Billed ($) Due This Period ($) 2. CIVIL SITE WORK 2.1. REINFORCED CONCRETE FOUNDATIONS FOR SUBSTATION SWITCHGEAR FOUNDATION STATION SERVICE CUSTOM STEEL INSTALLATION 3. SUBSTATION - ELECTRICAL KV EQUIPMENT INSTALLATION COUNDITS KV UG CABLES KV EQUIPMENT INSTALLATION SWITCHGEAR CONDUITS 3.3. TRANSPORTATION OF MISC. MATERIAL 3.4. RECEIVING / OFF-LOADING SUBSTATION PACKAGE 3.5. STATION SERVICE STATION SERVICE XFMRS MAIN BKR PNL MBP1-3P PNL 6YP2-1P PNL 6YP3-3P TERMINATE AC CABLE TERMINATE DC CABLE IPS BUS AND INSULATORS 3.6. GROUNDING #8 COPPERWELD GRID #5 COPPERWELD STRUCTURE AND EQUIPMENT TAPS CADWELD CONNECTIONS

3 ITEM SCHEDULE DESCRIPTION LABOR ($) MATERIAL ($) DEEP DRIVEN RODS SAMPLE SCHEDULE OF VALUES PERCENT COMPLETE LABOR (%) MATERI AL (%) LABOR ($) AMOUNT EARNED TO DATE MATERIAL ($) TOTAL ($) PAGE.: 3 OF 3 Previously Billed ($) Due This Period ($) 4. DISTRIBUTION DUCT BANK 4.1. MANHOLES CONDUIT CONDUIT 5. CLEAN UP CONSTRUCTION WORK AREA 6. TESTING 6.1. GROUND ROD MEASUREMENT 6.2. CONCRETE TSTING 6.3. INFRARED TEMPERATURE SURVEY 7. CONTROL HOUSE 7.1 CONTROL PANELS CONTROL PANELS 1A CONTROL PANELS 1D CONTROL PANELS HVAC 8. MISCELLANEOUS OTHER (SPECIFY) 8.1 CONDUIT TO DILLON SUB.

4 PROJECT DESIGN SEGMENT SWITCHGEAR AND STATION SERVICE REPLACEMENT CONDUIT SCHEDULE NOTES: 1. THE IS RESPONSIBLE FOR ALL NECESSARY CONDUIT MATERIALS, INCLUDING FITTINGS. 2. THE SHALL BE RESPONSIBLE FOR VERIFICATION OF ALL CONDUIT LENGTHS. CONDUIT LENGTHS ARE APPROXIMATE. 3. CONTROL HOUSE CONDUIT EXPOSED RUNS SHALL BE EMT. MAY CONCEAL CONTROL HOUSE CONDUIT WITHIN BLOCK WALLS UNLESS STATED OTHERWISE IN THE DRAWINGS. SHALL NOT CONCEAL ALUMINUM CONDUIT RUNS. CONDUIT LEGEND: UV - ULTRA VIOLET RESISTANT PVC CONDUIT, SCHEDULE 40 EMT - ELECTRICAL METALLIC TUBING RGS - RIGID GALVANIZED STEEL CONDUIT IMC - INTERMEDIATE METALLIC CONDUIT FLEX - LIQUID-TIGHT FLEXIBLE CONDUIT WW - SQUARE WIREWAY AL - ALUMINUM CONDUIT

5 CONDUIT SCHEDULE CONDUIT # FROM TO SIZE IN. TYPE ~LENGT H FT. YARD PANELS CABLES IN CONDUIT # SSATSC1 STATION SERVICE #1 ATS 4 UV 20 SSATS1/AC REMARKS SSATSC2 STATION SERVICE #2 ATS 4 UV 230 SSATS2/AC MTATSC1 METER CABINET ATS 4 UV 10 MTATS/AC MTMBP1C1 METER CABINET 69KV MBP1-3P 4 UV 30 MTMBP/AC MBP6YPDC1 PANEL D 69KV MBP1-3P 4 UV 40 MBP6YPD/AC MBP6YPGC1 PANEL G 69KV MBP1-3P 4 UV 80 MBP6YPG/AC MBP6YP68C1 PANEL 68 69KV MBP1-3P 4 UV 170 MBP6YP68/AC MBPACPC1 CONTROL HOUSE AC PANEL 69KV MBP1-3P 4 UV/ EMT 160 CH/AC ABB NEW SWITCHGEAR SWCTC1 SWITCHGEAR CABLE TRAY 13KV MH-1 4 UV/ EMT 140 SWCTC2 SWITCHGEAR CABLE TRAY 13KV MH-1 4 UV/ EMT 140 SW1MBP1C1 SWITCHGEAR ACP1-3P CT1 4 UV 210 SWGR/AC SW1MBP1C2 26KV MBP1-3P CT3 4 UV 10 SW/GRAC T11C1 SWITCHGEAR UNIT 2 CONTROL HOUSE 4/6 UV T12/TD -1, 13T12/TD -2, 13T12/SPARE-1 T11C2 SWITCHGEAR UNIT 2 CONTROL HOUSE 4/6 UV 200 T11C3 SWITCHGEAR UNIT 2 TRANSFORMER T12 4/6 UV KVBPT/SWGR, 13T12/C1, 13T12/SPARE-3, 13T12/SPARE-2 T12C1 SWITCHGEAR UNIT 2 TRANSFORMER T12 4/6 UV 200 T12/PH1 T12C2 SWITCHGEAR UNIT 2 TRANSFORMER T12 4/6 UV 200 T12/PH2 T12C3 SWITCHGEAR UNIT 2 TRANSFORMER T12 4/6 UV 200 T12/PH3 NEW SWITCHGEAR AC FEED 250 MCM CU Switchgear to Manhole 6 Existing conduit to Manhole 4 Switchgear to Manhole 6 Existing conduit to Manhole 4 Switchgear to Manhole 6 Existing conduit to Manhole 4 (3) 750 MCM UG CU, Switchgear to Manhole 6 (3) 750 MCM UG CU, Switchgear to Manhole 6 ((3) 750 MCM UG CU, Switchgear to Manhole 6

6 CONDUIT # FROM TO SIZE IN. CONDUIT SCHEDULE TYPE ~LENGT H FT. SWP4C1 SWITCHGEAR UNIT 4 10 STRIGHT OUT, WEST 6 UV 29 SWP4C2 SWITCHGEAR UNIT 4 10 STRIGHT OUT, WEST 6 UV 29 SWP5C1 SWITCHGEAR UNIT 5 10 STRIGHT OUT, WEST 6 UV 32 SWP5C2 SWITCHGEAR UNIT 5 10 STRIGHT OUT, WEST 6 UV 32 SWP6C1 SWITCHGEAR UNIT 6 10 STRIGHT OUT, WEST 6 UV 35 SWP6C2 SWITCHGEAR UNIT 6 10 STRIGHT OUT, WEST 6 UV 35 SWP7C1 SWITCHGEAR UNIT 7 10 STRIGHT OUT, WEST 6 UV 38 SWP7C2 SWITCHGEAR UNIT 7 10 STRIGHT OUT, WEST 6 UV 38 SWP8C1 SWITCHGEAR UNIT 8 10 STRIGHT OUT, WEST 6 UV 41 SWP8C2 SWITCHGEAR UNIT 8 10 STRIGHT OUT, WEST 6 UV 41 SWP9C1 SWITCHGEAR UNIT 9 10 STRIGHT OUT, WEST 6 UV 44 SWP9C2 SWITCHGEAR UNIT 9 10 STRIGHT OUT, WEST 6 UV 44 SWP10C1 SWITCHGEAR UNIT STRIGHT OUT, WEST 6 UV 47 SWP10C2 SWITCHGEAR UNIT STRIGHT OUT, WEST 6 UV 47 SWP11C1 SWITCHGEAR UNIT STRIGHT OUT, WEST 6 UV 50 SWP11C2 SWITCHGEAR UNIT STRIGHT OUT, WEST 6 UV 50 SWP14C1 SWITCHGEAR UNIT STRIGHT OUT, NORTH 6 UV 15 CABLES IN CONDUIT # REMARKS SWP14C2 SWITCHGEAR UNIT STRIGHT OUT, NORTH 6 UV 15 DISSBC1 TRANSFORMER T12 DILLON SUBSTATION CONTROL HOUSE DILLON SUBSTATION 4 UV 600 DIATS/AC DILLON ATS SECOND FEED

7 CONDUIT SCHEDULE END

8 PROJECT DESIGN SEGMENT SWITCHGEAR AND STATION SERVICE REPLACEMENT CABLE SCHEDULE CABLE NOTES: 1. TYPE B, BS, F, FO AND TR CABLE SHALL BE FURNISHED BY THE OWNER, UNLESS OTHERWISE SPECIFIED. 2. THE SHALL FURNISH ALL OTHER CABLE, AS SPECIFIED. 3. IS RESPONSIBLE FOR VERIFYING ALL CABLE LENGTHS. CABLE LENGTHS LISTED ARE APPROXIMATE. A - B - BS - C - F - FO - S - M - TR - CABLE LEGEND: THHN INSULATED COPPER CONDUCTOR, RATED 600V CONTROL CABLE SHIELDED CONTROL CABLE RHW, THHW, OR THWN INSULATED COPPER CONDUCTOR, RATED 600V INSTRUMENT CABLE FIBER OPTIC CABLE SINGLE CONDUCTOR MULTIPLE CONDUCTOR 13KV TRXLPE COPPER CABLE FILE: KP 69/13KV SUBSTATION - CABLE SCHEDULE.DOCX PAGE: 1 OF 2

9 CABLE SCHEDULE CABLE # FROM TO VOLT SIZE #C S/M TYPE LNGTH ckt ft CONDUIT # PAGE.: 2 OF 2 REMARKS 13KV SWITCHGEAR T12/PH1 13KV SWGR UNIT 2 TRANSFORMER T x750 1 S TR 500 T12C1 T12 LOW-SIDE UG CABLE, PHASE A T12/PH2 13KV SWGR UNIT 2 TRANSFORMER T x750 1 S TR 500 T12C2 T12 LOW-SIDE UG CABLE, PHASE B T12/PH3 13KV SWGR UNIT 2 TRANSFORMER T x750 1 S TR 500 T12C3 T12 LOW-SIDE UG CABLE, PHASE C 13T12/TD -1 13KV SWGR UNIT 2 MED. PANEL 1A M BS 500 T11C1, CT, TRAY T12 PRIMARY PROTECTION CT 13T12/TD -2 13KV SWGR UNIT 2 MED. PANEL 1A M BS 500 T11C1, CT, TRAY T12 PRIMARY PROTECTION CT 13T12/SPARE-1 13KV SWGR UNIT 2 MED. PANEL 1A M BS 500 T11C1, CT, TRAY T12 CT (SPARE) 13KVBPT/SWGR 13KV SWGR UNIT 2 LOW PANEL M BS 500 T11C2, CT, TRAY SWGR BUS POTENTIAL 13T12/SPARE-2 13KV SWGR UNIT 2 LOW PANEL M BS 500 T11C2, CT, TRAY SWGR BUS POTENTIAL (SPARE) 13T12/C1 13KV SWGR UNIT 2 LOW PANEL M BS 500 T11C2, CT, TRAY BKR 13T12 CONTROL 13T12/SPARE-3 13KV SWGR UNIT 2 LOW PANEL M BS 500 T11C2, CT, TRAY SWGR/AC 13KV SWGR AC PANEL 26KV MBP1-3P S C 270 SW1MBP1C1, CT1, CT3, SW1MBP1C2 BKR 13T12 CONTROL (SPARE) SWITCHGEAR AC POWER FEED STATION SERVICE & YARD PANELS SSATS1/AC STATION SERVICE #1 ATS 600 2x4/0 4 S C 40 SSATSC1 SSATS2/AC STATION SERVICE #2 ATS 600 2x4/0 4 S C 250 SSATSC2 FROM DISTRIBUTION POLE MTATS/AC METER CABINET ATS 600 2x4/0 4 S C 10 MTATSC1 METERING MTMBP/AC METER CABINET MBP1-3P 600 2x4/0 4 S C 40 MTMBP1C1 MBP6YPD/AC MBP1-3P PANEL D 600 4/0 4 S C 50 MBP6YPDC1 PANEL D AC POWER FEED MBP6YPG/AC MBP1-3P PANEL G 600 4/0 4 S C 90 MBP6YPGC1 PANEL G AC POWER FEED MBP6YP68/AC MBP1-3P PANEL S C 190 MBP6YP68C1 PANEL G AC POWER FEED CH/AC MBP1-3P DIATS/AC STATION SERVICE #1 CONTROL HOUSE AC PANEL ATS IN DILLON SUBSTATION 600 4/0 4 S C 150 MBPACPC1, CTE CONTROL HOUSE AC POWER FEED S C 600 DISSBC1 CONNECT TO SWITCH INTERRUPTER END

10 PROJECT DESIGN SWITCHGEAR AND STATION SERVICE REPLACEMENT MATERIALS FURNISHED BY OWNER GENERAL NOTES: 1. THE SHALL NOT RESPONSIBLE FOR TRANSPORTING THE LARGE POWER TRANSFORMER(S) OR SWITCHGEAR TO THE SUBSTATION SITE, THE S RESPONSIBLITIES IN REGARDS TO SITE ACCESS, FOUNDATIONS AND ASSEMBLY OF THE LARGE POWER TRANSFORMERS, HIGH VOLTAGE CIRCUIT BREAKERS, AND CIRCUIT SWITCHERS IS OUTLINED IN SECTION IX OF THESE SPECIFICATIONS. 2. THE SHALL BE RESPONSIBLE FOR ORDERING THE JEA STOCK MATERIAL THROUGH THE JEA PROJECT REPRESENTATIVE AT LEAST TWO WEEKS IN ADVANCE OF NEED, RECEIVING AND LOADING THE MATERIAL AT AN ARBITRARY JEA LOCATION WITHIN DUVAL COUNTY, FLORIDA, TRANSPORTING THE MATERIAL TO THE SUBSTATION SITE, AND THEN OFFLOADING AND INSTALLING THE MATERIAL AT THE JOBSITE. 3. THE SHALL BE RESPONSIBLE FOR TRANSPORTING AND OFFLOADING THE 125 VDC STATION BATTERIES AND BATTERY CHARGERS AND ACCESSORIES AT THE SUBSTATION SITE FROM AN ARBITRARY JEA LOCATION WITHIN DUVAL COUNTY, FL. THE SHALL MOVE THE BATTERY BANK CELLS, RACKS AND EQUIPMENT TO THE BATTERY BANK ROOM, UPON COMPLETION OF THE BATTERY BANK ROOM, FOR INSTALLATION BY THE MANUFACTURER. 4. THE SHALL BE RESPONSIBLE FOR TRANSPORTING, OFFLOADING AND INSTALLING THE RELAY / CONTROL SWITCHBOARD PANELS INTO THE (SUBSTANTIALLY COMPLETED) CONTROL HOUSE, FROM AN ARBITRARY JEA LOCATION WITHIN DUVAL COUNTY, FL. 5. THE OWNER SHALL FURNISH AND INSTALL THE ENTRANCE GATE MOTOR OPERATOR AND SECURITY RELATED EQUIPMENT BOTH IN THE SWITCHYARD AND THE CONTROL BUILDING. THE SHALL BE RESPONSIBLE FOR INSTALLATION OF THE SECURITY RACEWAY SYSTEMS (CONDUIT, JUNCTION BOXES, HANDHOLES, SECURITY POLES, AC POWER, ETC.) IF JEA EXERCISES SUCH OPTION. 6. THE OWNER SHALL FURNISH, TRANSPORT AND INSTALL THE COMMUNICATIONS AND SECURITY RACKS IN THE CONTROL BUILDING. 7. ALL MATERIALS PICKED UP OR RECEIVED BY THE SHALL REMAIN IN THE CARE, CUSTODY, AND CONTROL OF THE UNIL FINAL ACCEPTANCE. WILL BE RESPONSIBLE FOR ANY LOSS OR DAMAGE TO SAID MATERIAL. 8. THE IS RESPONSIBLE FOR FURNISHING AND INSTALLING MISCELLANEOUS ITEMS NOT LISTED IN THIS MATERIAL LIST, AS WELL AS ADDITIONAL MATERIALS LISTED ON THE DRAWINGS AND IN THE SPECIFICATIONS. THESE ITEMS INCLUDE, BUT ARE NOT LIMITED TO CABLE TRENCH COMPONENTS, CONDUIT, CONDUIT FITTINGS AND HARDWARE, GROUNDING CONDUCTOR AND CONNECTORS, CLAMPS, UNISTRUT, FASTENERS, CONTROL HOUSE ELECTRICAL EQUIPMENT, CABLE TRAY, WIREWAY, ELECTRICAL BOXES, ELECTRICAL POWER PANELS, TERMINAL BLOCKS, CONNECTORS, POWER CABLE, FITTINGS, ALL LABELING MATERIALS, ETC. FILE: - MATERIALS FURNISHED BY OWNER.DOCX PAGE: 1 OF 3

11 MATERIALS FURNISHED BY OWNER PAGE.: 2 OF 3 QTY DESCRIPTION MANUFACTURER COMMENTS DELIVERED TO / PICKUP FROM RESPONSIBILITY FOR TRANSPORT / OFF-LOAD - UNDERGROUND TERMINALS, BUSWOKR, STUCTURES, AND ASSOCIATED EQUIPMENT FURNISHED BY JEA SEE APPENDIX II PROVIDED BY DISTRAN DELIVERED TO SUBSTATION SITE TRANSPORTATION BY JEA OFF-LOAD BY 1 13 KV SWITCHGEAR ABB SEE NOTE 1 JEA 3 13 KV 240/120 V STATION SERVICE TRANSFORMERS, 75KVA JEA STOCK # TRACG CONNECTOR, TRANSF. SECONDARY, SIX PORT MULTI-TAP FOR 25kVA AND 50KVA CONNECTOR, TRANSFORMER TANK GROUND. #6-#1 240 VAC, 400 AMP, OUTDOOR, AUTOMATIC TRANSFER SWITCH 750MCM BRONZE 4 HOLE PAD CONNECTORS 5000 FT. SPOOL, SHIELDED CONTROL CABLE, #10, FOUR CONDUCTOR STOCK # CNNTS007 STOCK # CLATG001 STOCK # SWETR002 JEA (CNNTE048?) STOCK # CAICN016 FNCT-34-4B OR SIMILAR 4000 FT FT. SPOOL, SHIELDED CONTROL CABLE, #10, EIGHT CONDUCTOR 2500 FT. SPOOL, SHIELDED CONTROL CABLE, #10, TWENTY ONE CONDUCTOR STOCK # CAICN017 STOCK # CAICN FT 1300 FT 1 DISTRIBUTION STANDARD MANHOLE STOCK # MANHO002 FOR 13KV MH-1, 12 x6 x7, LB 2 DISTRIBUTION MANHOLE COVERS STOCK # COVMA001 FOR 13KV MH-1 2 DISTRIBUTION MANHOLE COVER FRAME STOCK # FRAMC001 FOR 13KV MH-1 2 DISTRIBUTION MANHOLE GRADE EXTENSION RING (INCLUDES NECK) STOCK # MANER003 FOR 13KV MH-1 32 DOUBLE CABLE HOOK, 8-1/4 EXTENSION, LOCK TYPE STOCK # HOKCA003 FOR 13KV MH-1

12 MATERIALS FURNISHED BY OWNER PAGE.: 3 OF 3 QTY DESCRIPTION MANUFACTURER COMMENTS DELIVERED TO / PICKUP FROM RESPONSIBILITY FOR TRANSPORT / OFF-LOAD 10 CABLE RACK, 42 INCHES STOCK # RACUC002 FOR 13KV MH-1 1 ELECTRIC WARNING TAPE, 6 x1000 ROLL STOCK # TAPMA001 FOR 13KV MH-1 18 BRONZE BOLTED, STRAIGHT 4/ CABLE TO 4 HOLE PAD CONNECTOR 3 BROZE TEE BOLTED 4/ STOCK # CNNTL 773 STOCK # CNNTE TUBE TO 4 HOLE PAD, TIN-PLATED BRONZE CONNECTOR 100 FT 750 MCM CU BARE CONDUCTOR STOCK # CNNTL928 STOCK # COBCO040 69kV BUS SIZE TO BE FIELD VERIFIED 5500 FT 750 MCM CU INSULATED UG CABLES STOCK # CAICL013

13 69/13kV Kennedy Substation JEA, FL Origination Date: Material List No: Q Sheet No: 1 of 1 ITEM QTY. DESCRIPTION MFG. TYPE OR CAT. NO. 1 6 SST MOUNTINGS FOR EXISTING SST STANDS DIS-TRAN APPX WT = 250 LBS EA 2 LOT MISCELLANEOUS BOLTS T.F. A 1 STATION SERVICE TRANSFORMER CONDUIT SUPPORT DIS-TRAN APPX WT = 100 LBS EA KV STATION POST INSULATORS, 110KV BIL, STANDARD SRENGTH, R- 205, 3" B.C. NEWELL " IPS COPPER TUBING, SCH 40 (3) 20'-0" LENGTHS WILLIAMS M TUBING 3 6 BUS SUPPORT CLAMP, 3" IPS COPPER TUBING TO 3" B.C., BOLTED BRONZE ASTI-62-3-BR 4 3 TERMINAL, 3" IPS COPPER TUBING TO 4" 4 HOLE PAD, BOLTED, FNTT-62-4B 5 9 TEE CONNECTOR, 3" IPS COPPER TO 750 MCM COPPER CABLE, BOLTED, BRONZE TTRCT TERMINAL, (2) 750 MCM COPPER CABLE TO 4" 4 HOLE PAD, BOLTED, BRONZE FNCT TERMINAL, 2) 750 MCM COPPER CABLE TO 4" 4 HOLE PAD, 90 DEGREE, BOLTED, BRONZE FNCT B 8 3 TEE CONNECTOR, (2) 750 COPPER CABLE TO 3" 4 HOLE PAD, BOLTED, BRONZE TFC2-34-4A 9 9 TERMINAL, 750 MCM COPPER CABLE TO 3" 4 HOLE PAD, BOLTED, BRONZE FNCT-34-4A 10 3 TEE CONNECTOR, 750 MCM COPPER CABLE TO 750 MCM COPPER CABLE, BRONZE TCRCT TEE CONNECTOR, 3" IPS COPPER TUBING TO 3" 4 HOLE PAD, BOLTED, BRONZE TFT-62-4A 13 3 TERMINAL, #6-250MCM COPPER CABLE TO 3" 4 HOLE PAD, BOLTED, BRONZE FNCT-12-4A KV TERMINATERS, 750 MCM UG COPPER CABLE, FLANGE MOUNTED, PORCELAIN STYLE 8 OFFSET ERMINAL (A A) G&W PAR END BELL, 3" IPS COPPER TUBING, DRIVE TYPE, BRONZE DP-62-BR 16 9 TERMINAL, 750 COPPER CABLE TO 2 HOLE PAD, BOLTED, BRONZE FNCT-34-2B 17 6 TERMINAL, #6-250 MCM COPPER CABLE TO 2 HOLE AD, BOLTED, BRONZE FNCT-12-2B Tuesday, May 15, 2018