UNIVERSITI TEKNIKAL MALAYSIA MELAKA

Size: px

Start display at page:

Download "UNIVERSITI TEKNIKAL MALAYSIA MELAKA"

Pamela Doyle
5 years ago
Views:

UNIVERSITI TEKNIKAL MALAYSIA MELAKA Kurikulum Vitae Curriculum Vitae. I. Maklumat Peribadi: Personal Particulars Nama Name : Mohd Luqman Bin Mohd Jamil No.

Permanent/temporary Gred Kumpulan : DS 54 Nombor Staf : 00193 Gred position Staff Number: Emel : luqman@utem.edu.my Tarikh Pengemaskinian CV : 8/2 /2018 E-mail: Date of CV updated: II. A.

1 UNIVERSITI TEKNIKAL MALAYSIA MELAKA Kurikulum Vitae Curriculum Vitae. I. Maklumat Peribadi: Personal Particulars Nama Name : Mohd Luqman Bin Mohd Jamil No. Kad Pengenalan : Fakulti/Pusat : Faculty of Electrical Engineering IC No: Faculty/Centre Jawatan Sekarang : Deputy Dean (Academic) Tetap / Sementara : Permanent Current Position Permanent/temporary Gred Kumpulan : DS 54 Nombor Staf : Gred position Staff Number: Emel : luqman@utem.edu.my Tarikh Pengemaskinian CV : 8/2 / Date of CV updated: II. A. Kelulusan Akademik dan Profesional Academic and Professional Qualifications Tahun Year 2011 PhD. Kelulusan Degree Pengkhususan Discipline Design of Electrical Machine Universiti University The University of Sheffield 2003 M.Sc. Electrical Power Engineering University of Newcastle upon Tyne 2000 B. Eng (Hons). Electrical Power Engineering Universiti Teknologi MARA 1998 Diploma Electrical Power Engineering Institut Teknologi MARA B. Tajuk tesis pascasiswazah Titles of postgraduate thesis written 1. MSc thesis: Modelling Of Flux-Linkage Characteristics for 6/4 Switched Reluctance Machine Using MATLAB- SIMULINK 2. PhD thesis: Unbalanced Magnetic Force in Fractional-Slot Permanent Magnet Brushless Machines 1

2 III. Pengalaman Akademik Academic Experiences Undergraduate subject(s): 1. Final Year Project (21 students) ( 4 th year) 2. Special Machines (3 rd year) 3. Electrical Actuator and Drives (3 rd year) 4. Power Electronics & Drives Laboratory II (3 rd year) 5. Electric Machines (3 rd year) 6. Electromagnetic Theory (2 nd year) 7. Electrical System (2 nd year) 8. Introduction to Power Engineering (2 nd year) 9. Electrical Technology (2 nd year) 10. Circuit Analysis (2 nd year) 11. Analogue Electronics (2 nd year) 12. Electric Circuit (2 nd year) 13. Engineering Practice (2 nd year) Postgraduate subject(s): 1. Machine Design IV. Jawatan yang Disandang dan Lain-lain Tanggungjawab Administratives Duties and Other Responsibilities Year International Committee member for IEEE PECON 2015 Technical Committee member for AMPE 2015, International Conference 2014 On Committee Advanced member Mechanics, for 5th Power Unsys, & International Energy Conference On Underwater System Technology 2014 Chair Session for IEEE International Power Engineering and Optimization Conference (PEOCO) 2014 Chair Session for IEEE International Conference on Energy Conversion (CENCON) 2012 Committee member for PECS, Power And Energy Conversion Symposium Year National TTAC (MBOT) Assessor (Specialised in Electrical Engineering) MQA Assessor (Specialised in Electrical Power Engineering) MQA Assessor (Specialised in Electrical Power Engineering) Year University - Deputy Dean (Academic), Faculty of Electrical Engineering present 2017 Committee Member for 4.0 Industrial Revolution 2017 Member of Board of Studies for Bachelor Degree in Automotive Engineering, Faculty of Mechanical Engineering Head of Department (Power Electronics & Drives) Head of Diploma Studies Committee Member for Convocation - PIDK Committee Member for OBE System 2015 Committee Member for Grant Application 2014 Committee Member for Teaching & Learning 2013 Committee Member for Teaching & Learning 2013 Committee Member for FRGS Application 2012 Committee Member for Faculty Academic Board 2012 Assessor for Master Degree Proposal 2

3 2012 Technical Committee for UTEM PGMC (Proton Green Mobility Challenge) Year Faculty 2017 Committee Member for Energy Management Certification Committee Member for Asset & Inventory 2015 Head of Electrical Machine Design Laboratory 2015 Committee Member for Curriculum & Academic Planning 2015 Committee Member for Technical Evaluation 2015 Committee Member for Accreditation Visit 2014 Committee Member for Curriculum & Academic Planning 2014 Committee Member for Ceria CoE 2014 Committee Member for FYP & Capstone Project 2014 Assessor for Master Degree Proposal - FKEKK 2013 Head of Electrical Machine Design Laboratory 2013 Head of Committee for FYP, PBL & Mini Projects 2013 Committee Member for Technical Evaluation 2013 Committee Member for Curriculum & Academic Planning 2013 Committee Member for Teaching & Learning 2013 Assessor for Master Degree Proposal - FKEKK 2012 Head of Committee for FYP & PBL 2012 Head of Committee for Colloqium Between Umpedac & FKE 2012 Committee Member for New Broadbased Program 2012 Committee Member for Industrial Link & MOU/MOA 2012 Committee Member for Power Electronics & Drives Cluster 2011 Committee Member for Research & Postgraduate Studies 2011 Committee Member for FYP & PBL 2011 V. Bidang Penyelidikan Utama Main Areas of Research Interest Committee Member for Technical Evaluation i) Design of Rotating Electric Machines ii) Design of Electric Actuator iii) Control of Electric Drives iv) Power Electronics Converter VI. Projek Penyelidikan yang telah selesai/sedang dijalankan Completed/On-going research project Year Title Fund Role STUDY ON THE EFFECT OF STRUCTURE PARAMETERS TO THE MOVING COIL LINEAR DC MOTOR'S PERFORMANCE CHARACTERISTICS DESIGN AND DEVELOPMENT OF SELF-POWERED OF FREE ENERGY PERMANENT MAGNET GENERATOR (FePMG) FRGS/2010/FKE/TK03/2/ F00075 MTUN/2012/UTEM-FKE/1 M

4 DESIGN AND ANALYSIS OF FRACTIONAL-SLOT PM BRUSHLESS MACHINE FOR ELECTRIC VEHICLE APPLICATION INVESTIGATION AND DEVELOPMENT OF HIGH TORQUE - LOW SPEED PM BRUSHLESS MOTOR FOR EXOSKELETON ROBOT - BIONIC ARM PROTOTYPE DEVELOPMENT OF PORTABLE HAND HELD MOTOR SCRUBBER FOR HOME CLEANING APPLICATION INDEPENDANT CONTROL SCHEME FOR SUB-BEARING PERMANENT MAGNET AC MOTOR DRIVES DEVELOPMENT OF PORTABLE ELECTRICAL MOULDING DEVICE FOR SAMPERIT AND TART COOKIES MODELLING ON THE INFLUENCE OF SLOTTED ROTOR TO THE PERFORMANCE PARAMETER IN DOUBLE STATOR BRUSHLESS DC PERMANENT MAGNET MOTOR A NEW TECHNIQUE OF PMSM SENSORLESS VECTOR CONTROL PMSM THROUGH HIGH FREQUENCY INJECTION FOR ZERO AND LOW SPEED APPLICATION UTEM RENEWABLE SHOWCASE PJP/2012/FKE(53A)/S01060 PJP/2012/CERIA/Y00002 PJP/2013/FKE/PROTOTAIP/S01284 FRGS/2/2013/TK02/FKE/02/F00168 PJP/2013/FKE(30B)/S01272 FRGS/1/2014/TK03/FKE/02/F00208 FRGS/2/2014/TK03/FKE/03/F00239 PJP/2014/FKE(18A)/S MODELLING OF MAGNETIC CIRCUIT ARRANGEMENT FOR ATTAINING CONSTANT THRUST OF SINGLE PHASE SLOT-LESS ELECTRIC LINEAR ACTUATOR DESIGN OF THE ELECTRIC BICYCLE ACTUATOR FRGS/1/2015/TK04/FKE/02/F00260 PJP//FKE/HI5/S

5 VII. Senarai Penerbitan List of Publication 1. F. Azhar, R.N. Firdaus, M.L. Mohd Jamil, Design of A Linear DC Motor For High Thrust Constants Characteristics ARPN Journal of Engineering And Applied Sciences, Issue 14, vol 11, pp : M.L.M. Jamil, S.M.S.A. Al-Habshi, M.N. Othman and T. Sutikno, Performance of Fractional-Slot Winding PM Machines due to Un-even Coil Turns and Asymmetric Design of Stator Teeth, International Journal of Power Electronics and Drive Systems (IJPEDS), Vol. 6, No. 4, December 2015, pp M. L. Mohd Jamil, Z. Z. Zolkapli, A. Jidin and T. Sutikno, Performance of Fractional-Slot Winding PM Machines due to Un-even Coil Turns and Asymmetric Design of Stator Teeth, International Journal of Power Electronics and Drive Systems (IJPEDS), Vol. 6, No. 4, December 2015, pp S. Sanusi, A. Jidin, T. Sutikno, K. Abdul Karim and M.L.M. Jamil, Implementation of Space Vector Modulator for Cascaded H-Bridge Multilevel Inverters, International Journal of Power Electronics and Drive Systems (IJPEDS), Vol. 6, No. 4, December 2015, pp R. N. Firdaus, S. Farina, R. Suhairi, K. A. Karim, M.L.M. Jamil, Effect of Magnet Edge to Spoke Type BLDC Motor, The International Conference on Power, Energy, and Communication Systems (IPECS 2015) August 24-25, Perlis, Malaysia, pp. 1-6, K.A.Karim, N.A. Mohd Yusoff, A.Jidin, F. Patkar, R.N.F. Raja Othman, M.L. Mohd Jamil, Analysis of Five- Phase Induction Motor With Dynamic Load, ARPN Journal of Engineering and Applied Sciences, vo. 10, no. 20, pp Z.Q. Zhu, L.J. Wu, M.L. Mohd Jamil, Influence of Pole and Slot Number Combinations on Cogging Torque in Permanent-Magnet Machines With Static and Rotating Eccentricities, IEEE Transactions on Industry Applications, vol. 50, no. 5, pp S.M. Al-Habshi, M.L. Mohd Jamil, M.N. Othman, A. Jidin, K. Ab Karim, Z.Z. Zolkapli, Influence of Number of Turns Per Coil in Fractional-Slot PM Brushless Machines, IEEE Conference on Energy Conversion, pp Z.Z. Zolkapli, M. L. Mohd Jamil, S. M. Al-Habshi, A. Jidin, M. N. Othman, Torque Ripple Minimization Technique in Fractional-Slot PM Brushless Machines IEEE Conference on Energy Conversion, MZRZ Ahmadi, A Jidin, MN Othman, MLM Jamil, T Sutikno, R Nair, High efficiency of switching strategy utilizing cascaded H-bridge, IEEE Conference on Energy Conversion (CENCON), 2014, K Rahim, A Jidin, F Patkar, MLM Jamil, MZRZ Ahmadi, KA Karim, A dual mode DTC of open-end winding induction motor drive with reduced torque ripple IEEE Conference on Energy Conversion (CENCON), 2014, N Abdullah, KA Karim, MLM Jamil, MN Othman, Design of Switched Reluctance Motor Using Empirical Method, International Journal of Energy and Power Engineering Research, pp M. L. Mohd Jamil, Z. Z. Zolkapli, A. Jidin, S. M. Al-Habshi, M. N. Othman, Electromagnetic Performance of High-Torque and Low-Speed PM Brushless Machines, IEEE 8th International Power Engineering and Optimization Conference, pp

6 14. LJ. Wu, Z. Q. Zhu, ML Mohd Jamil, Unbalanced magnetic force in permanent magnet machines having asymmetric windings and static/rotating eccentricities, International Conference on Electrical Machines and Systems (ICEMS), pp Z.Q. Zhu, LJ. Wu, M.L. Mohd Jamil, Influence of pole and slot number combinations on cogging torque in permanent magnet machines with static and rotating eccentricities, IEEE Energy Conversion Congress and Exposition (ECCE), pp Z.Q. Zhu, M.L. Mohd Jamil, LJ Wu, Electromagnetic performance of interior permanent magnet machines with eccentricity, Ecological Vehicles and Renewable Energies (EVER), pp Z.Q. Zhu, LJ Wu, M.L. Mohd Jamil, Distortion of Back-EMF and Torque of PM Brushless Machines Due To Eccentricity, IEEE Transactions on Magnetics, vol. 49, no. 8, pp Z.Q. Zhu, M.L. Mohd Jamil, LJ Wu, Influence of Slot and Pole Number Combinations on Unbalanced Magnetic Force in Permanent Magnet Machines with diametrically asymmetric windings, IEEE Transactions on Industry Applications, vol. 49, np. 1, pp Z.Q. Zhu, M.L. Mohd Jamil, LJ Wu, Influence of slot and pole number combinations on unbalanced magnetic force in permanent magnet machines, IEEE Energy Conversion Congress and Exposition (ECCE), pp PhD Thesis; Unbalanced Magnetic Force in Fractional-Slot Permanent Magnet Brushless Machines, University of Sheffield, June Z.Q. Zhu, M.M. Jamil, D. Howe, Comparative study of unbalanced magnetic force in fractional slot PM brushless machines, Ecological Vehicles and Renewable Energies (EVER) 22. A.Rozali, K. Abdul Karim, M.L. Mohd Jamil, Development and Analysis of Switching Technique for Modular Structured Multilevel Inverter (MSMI) in Power Conditioner Application, MUCET VIII. Bilangan sitasi dan nama jurnal Number of citation and name of journals Google Scholar Citation = 143 h index = 6 i10-index = 4 ResearchGate Score = 8.33 IX. Penilai Jurnal dan Persidangan Reviewer for Journals and Conferences 1. Articles Reviewer for IEEE Transactions on Industrial Electronics 2. Articles Reviewer for IEEE Transactions on Industry Applications 3. Articles Reviewer for Journal of Engineering Science and Technology, Taylor's University 4. Paper Reviewer for 1 st Power And Energy Conversion Symposium (PECS) Paper Reviewer for 2 nd Power And Energy Conversion Symposium (PECS) Paper Reviewer for 5 th International Power Engineering and Optimization Conference (PEOCO 2012) 7. Paper Reviewer for 6 th International Power Engineering and Optimization Conference (PEOCO 2014) 6

7 8. Paper Reviewer for 6 th International Conference on Power and Energy (PECON ) 9. Paper Reviewer for 4 th IET International Conference on Clean Energy and Technology (CEAT ) X. Senarai Anugerah List of Awards Year Event Title Award Malaysia Technology Expo (MTE) High Torque-Power Density Permanent Magnet Machine Gold The International Invention, Innovation & Technology Exhibition (ITEX) 2015 UTEMEX 2015 Majlis Anugerah Perkhidmatan Cemerlang & Anugerah Sanjungan Universiti 2013 Proton Green Mobility Challenge 2005 Majlis Hari Kualiti KUTKM Hexy-Ciency Drive High Torque-Power Density Permanent Magnet Machine Anugerah Perkhidmatan Cemerlang EVeRGREEN UTeM Proton Electric Car Anugerah Perkhidmatan Cemerlang Gold Gold - Anugerah Akademik Universiti - XI. Inovasi Innovation Year Title Type 2015 A SPOKE TYPE PERMANENT MAGNET MOTOR Patent File XII. Senarai Penyeliaan Pelajar PascaSiswazah Supervisor for postgraduate students Year Degree Name Research Title Role Influence of Non- Uniform Number of Turn MSc Syed Muhammad Bin Syed per Coil And Stator Geometry On Abdullah Al Habshi Unbalanced Magnetic Force in Brushless Permanent Magnet Machines (Completed) (Completed) 2017 (On going) MSc PhD Zulfikri Zaki Bin Zolkali Siti Azura Binti Ahmad Tarusan Influence of Tooth Designs on Electromagnetic Characteristics in Fractional-Slot Permanent Magnet Brushless Machines Design an Control of Five-Phase Fault- Tolerant Permanent Magnet Motor For Electric Vehicle Main Supervisor Main Supervisor Main Supervisor XIII. Pemeriksa Pelajar Pasca-siswazah Postgraduate Student Examiner 1. External Examiner i. UTHM - Nurul Ain binti Jaafar (Master by research) ii. Title : Transformation of PMFSM to HEFSM With Iron Flux Bridges For HEV Applications UMP - Nor Azwa binti Othman (Master by research) Title : Modified Hysteresis Current Controller of Half-Bridge Bidirectional DC-DC Converter For Capability To Test Regenerative Braking Using Chassis Dynamometer 2. Internal Examiner i. UTeM - Ahmad Faiz bin Nor Azam (Master by mix-mode) Title : Implementation of Direct Torque Control of Brushless DC Motor Using Digital Signal Processor ii. UTeM Muhammad Zuhaili bin Razali (Master by research) Title : Proton Exchange Membrane Fuel Cell (PEMFC) Parameters Estimation Using Time-Frequency 7

8 Distribution (TFD) Analysis Technique iii. UTeM Muhammad Sufyan bin Muhamad Basir (Master by research) Title : A New Time-Frequency Distribution For Real-Time Batteries Parameters Estimation System XIV. Academic Activities (Others) Aktiviti Akademik (Lain-lain) i. Assessor for Senior Academic position One candidate, Faculty of Electrical and Electronic Engineering, UTHM ii. Chairman of the Viva-voce Masters by Research, Noor Azamiah binti Md Fauzi, UTeM XV. Penasihatan / Hubungan Industri Consultation / Industrial Link 1. Consultant/ for Projek Penjimatan dan Kecekapan Penggunaan Tenaga Untuk Syarikat Air Melaka Berhad Under collaboration with Syarikat RBW Engineering, Academic-Technical Consultant for Motor Rewinding Course, ILP Kuala Lumpur Served for Perodua Technical Staff, XVI. Keahlian / Badan Profesional Membership / Professional Body 1. Graduate Engineer, BEM 2. MIET, Chartered Engineer UK 3. Professional Technologist, MBOT XVII. Sumbangan Kepada Masyarakat Contributions to Society 1. Pengerusi PIBG, Sek. Rendah I-Musleh, Bukit Katil /15 2. Ahli Jawatankuasa i-bantu Melaka - (Emergency & Resque Unit) / Sukarelawan i-bantu Melaka - (Emergency & Resque Unit) / Biro Pendidikan, Jawatankuasa Penaja Surau Ar-Raudhah, Taman Melaka Perdana - 8

UNIVERSITI TEKNIKAL MALAYSIA MELAKA

UNIVERSITI TEKNIKAL MALAYSIA MELAKA Kurikulum Vitae Curriculum Vitae. I. Maklumat Peribadi: Personal Particulars Nama: Name: Dr. Jurifa Mat Lazi Jawatan Sekarang: Current Position: Gred Kumpulan: Gred