Network Installation. July 2008 CONTENTS

Size: px

Start display at page:

Download "Network Installation. July 2008 CONTENTS"

Mabel Simon
6 years ago
Views:

1 Network Installation CONTENTS General Software Hard Lock System Requirements Installation on Server Installation on Each Work Station Directory Structure July 2008 Require PowerCad-5 Ver PowerCad-5 User Guide Supplement Network Installation 1

2 The software program described by this user guide and the contents of the user guide itself are subject to change without notice. The described software program is licensed material and may be copied only in accordance with the terms of the license agreement. Copies made otherwise are illegal. Copies of this publication, in whole or in part, by any means, are also prohibited and illegal without express written consent of PowerCad Software Pty. Ltd. Autodesk and AutoCAD are registered trademarks of Autodesk, Inc. Acrobat Reader copyright 2007 Adobe Systems Incorporated. All rights reserved. Adobe and Acrobat are trademarks of Adobe Systems Incorporated. Microsoft and Windows are registered trademarks of Microsoft Corporation. PowerCad-5 User Guide Supplement Network Installation 2

3 General This supplementary guide includes information for installing a multi-license network version of PowerCad-5. Before you install 1. (For NT, Windows XP Pro or Vista ) ensure write permission is available to the following locations: Target Folder for PowerCad-5. System Registry Windows System Folder. AutoCAD Support Folder. 2. Ensure AutoCAD 2005 or higher is installed. 3. Re-boot the computer. 4. Close all running applications. 5. Disable virus-checking software. (Refer Virus Software Documentation for Instructions). Software Hardlock PowerCad-5 software is supplied with an electronic hardware lock. The hardware lock connection is of the USB port type. (see Fig.1) Fig.1 PowerCad-5 User Guide Supplement Network Installation 3

4 System Requirements Before you begin installing PowerCad-5 on a work station computer, make sure that the computer meets the following minimum recommended requirements: Hardware/ Software Requirements Comments Operating System Windows 2000 Windows XP Pro with SP2 Vista Processor Pentium IV 2GHz or higher Minimum Intel Core 2 Quad Processor RAM 512Mb Minimum 1Gb Video 1024x764SVGA with 64 thousand colour Hard Disk Folder: 150Mb Minimum 175Mb Pointing Device Mouse, trackball or other device CD-Rom Any speed For installation only Web Browser Microsoft Internet 5.0 or later AutoCAD AutoCAD 2005 AutoCAD 2006 AutoCAD 2007 AutoCAD 2008 AutoCAD 2009 PowerCad-5 User Guide Supplement Network Installation 4

5 Installation on Server Note: Step 1: Step 2: Step 3: Step 4: Close all applications Provide full Administrator rights Install Hardware Lock in USB port Insert CD. PowerCad-5 installation will Auto Start. From the Menu, select - Install Licence Manager. Ensure the LM is active. Check that the LM icon is displayed on O/S task bar tray (bottom right of screen). If the LM Icon is not displayed on the task bar tray, via the Start/Programs/PowerCad Aladdin LM select NetHasp Licence Manager to activate the LM. Step 5: From the Menu, select Install Cable Selection & Electrical Design Software. Note: After software has been registered PowerCad-5 can be uninstalled from the Server. a) On the product Authentication screen, enter the Serial Number and CD Key located on the sticker on the back of the PowerCad-5 CD-Rom packaging. Choose next to proceed. b) On the opening screen review the PowerCad Software License Agreement, you must accept this agreement to complete the installation. To accept, choose Yes to proceed with the installation. c) On the Destination Folder page, do one of the following: Choose Next to accept the default drive/destination folder. Choose Browse to specify a different drive where you wish PowerCad-5 installed. Choose any drive, folder that is on your stand-alone computer hard drive(s). d) Licensee Details Screen. Enter the Licensee information. Note: This information will be printed on all reports generated by PowerCad-5. Choose Next. e) On the Set Up Complete screen do one of the following: Choose Finish to complete PowerCad-5 installation. Tick the check box to install Adobe Acrobat Reader 8.0 Note: Adobe Acrobat Reader 8.0 is required to view the PowerCad-5 User Guide. Tick the check box to launch PowerCad-5. PowerCad-5 User Guide Supplement Network Installation 5

6 Installation on Each Work Station Note : Close all applications Provide full Administrator rights Step 1: Insert the PowerCad-5 CD. Auto play feature will automatically invoke the setup program. If auto play is turned off, then manually run setup.exe. From the Start Menu, choose run, enter the CD-Rom Drive letter and Setup: Example, enter D:\setup. Step 2: From the Menu, select - Install Cable Selection & Electrical Design Software. a) On the product Authentication screen, enter the Serial Number and CD Key located on the sticker on the back of the PowerCad-5 CD-Rom packaging. Choose next to proceed. b) On the opening screen review the PowerCad Software License Agreement, you must accept this agreement to complete the installation. To accept, choose Yes to proceed with the installation. c) On the Destination Folder page, do one of the following: Choose Next to accept the default drive/destination folder. Choose Browse to specify a different drive where you wish PowerCad-5 installed. Choose any drive, folder that is on your stand-alone computer hard drive(s). d) Licensee Details Screen. Enter the Licensee information. Note: This information will be printed on all reports generated by PowerCad-5. Choose Next. e) On the Set Up Complete screen do one of the following: Choose Finish to complete PowerCad-5 installation. Tick the check box to install Adobe Acrobat Reader 8.0 Note: Adobe Acrobat Reader 8.0 is required to view the PowerCad-5 User Guide. Tick the check box to launch PowerCad-5. Step 3: Step 4: Open Explorer, double click on nethasp.ini file located in the PowerCad-5 directory. Configure the nethasp.ini file (a) (b) (c) (d) [NH-Common] enable the correct Protocol. eg NH_TCPIP = Enabled. [NH_TCPIP] add the server IP address. eg NH_SERVER_ADDR = [NH_TCPIP] add the packet type: Send a TCP packet or UDP packet; Default: UDP eg NH_TCPIP_METHOD = TCP [NH_TCPIP] add the timeout length. NH_SESSION = <m> default is 2 seconds. NH_SEND_RCV = <n> default is 1 second. Change the default values if connected to a slow or busy station. PowerCad-5 User Guide Supplement Network Installation 6

7 Directory structure Work Station - PowerCad-5 PowerCad-5 User Guide Supplement Network Installation 7

8 POWERCAD TM PowerCad Software Pty. Ltd. Suite 9, 118 Church Street Hawthorn Victoria 3122 Australia Tel: Fax:

Electronic Park Brake, Service & Reset Tool. User Guide

30662000 Electronic Park Brake, Service & Reset Tool User Guide Produced by the Manufacturer All rights reserved. This publication may not be reproduced, in full or in part, without the express written