Flexible Conduit Systems for Critical Power & Data Cable Protection

Transcription

1 Fexibe Conduit Systems for Critica Power & Data Cabe Protection

2 Wecome The best conduit system...just got even better The most advanced conduit fitting is here Adaptaok ATS from Adaptafex. A revoutionary, one piece, mouded fitting idea for wet or dry conditions. Offering a simpe and faisafe choice of conduit fitting. FEATURING n Fastest to fit and simpe to remove. n Aows stock hoding to be reduced. n Faster and easier to specify. n One piece fits a IP requirements. NEW Rai Guide Rai Industry Specification Guide from Adaptafex. The essentia industry reference too FEATURING n Detaied guide on conduit appications for a types of train, ight rai, underground, overground, trackside, maintenance & infrastructure appications. n Technica data for hazardous categories, passenger safety systems, eectromagnetic screening & fire standards. n Overview of goba rai standards and how they appy to conduit systems. n Fexibe conduit systems and individua appications CMPL

3 Contents INTRODUCTION - Company Overview & Quaity Approvas 4-5 APPLICATIONS - Commercia & Contracting, Machine Toos, Rai, Marine, Automation, Limitess Appications 6-11 Non Metaic Systems SYSTEM SELECTOR & INTRODUCTION - Non Metaic Systems 12-1 NON-METALLIC CONDUIT - PA & PI Non-metaic conduit NON-METALLIC CONDUIT - PR, CP & PADL Non-metaic conduit 16 ADAPTALOK - One-Piece Push-On Liquid Tight Fittings ADAPTALOK - One-Piece Push-On Liquid Tight Fittings with Swive Brass Threads ADAPTALOK - UNEF Circuar Connector Fittings (MIL C 5015) 22 ADAPTALOK - Cip Together JUMBO IP40 Fittings 2 NEW ADAPTALOK ATS - One-Piece Push-On Liquid Tight /69k, Swive Brass Threads & UNEF Circuar Connector (MIL C 5015) Fittings 24- ADAPTASEAL - Liquid Tight Compression Fittings & Accessories 4-5 ADAPTARING - Freey Rotating Swive Compression Fittings 6 SPECIALIST NON-METALLIC SYSTEM - KF Korifit Non-Metaic Conduit & Fittings 7-8 SPECIALIST NON-METALLIC SYSTEM - PP Non-Metaic Conduit & Fittings 9 SPECIALIST NON-METALLIC SYSTEM - XF & RF Xtrafex Non-Metaic Conduit & Fittings 40 ACCESSORIES - Locknuts, Conduit Cips, Thread Convertors, End Caps, Seaing Washers, End Seeves & Remova Too 41 ACCESSORIES - FK Fastock & MB Manifod Boxes 42-4 ACCESSORIES - Hinged T & Y Pieces HI-SPEC NON-METALLIC CONDUIT SYSTEM - PK,PKTC,PKSS,PRTC,PRSS PEEK Speciaist Low Fire Hazard & EMI Screen Conduit Metaic Systems SYSTEM SELECTOR & INTRODUCTION - Metaic Systems ADAPTASTEEL - S & SS Fexibe Stee Conduit & S Fittings ADAPTASTEEL - SP, SN & LFH-SP Covered Stee Fexibe Conduit & SP Fittings ADAPTASTEEL - SPL, SPLHC & SPUL Covered Stee Fexibe Conduit & SPL Fittings ADAPTASTEEL - SB, STC, SSB & SSBGS Speciaist EMI Screen Conduit & SB Fittings ADAPTASTEEL - SPB & SPTC Speciaist Liquid Resistant, EMI Screen Conduit & SPB Fittings 60 ADAPTASTEEL - SPLHCB Speciaist Liquid Tight Strength Conduit & SPLB Fittings 61 ACCESSORIES - Locknuts, P-Cips, 90 & 45 Ebows, Proximity Switch Adaptors, Femae Coupers, Enargers, Reducers & Converters 62-6 NEW CONVENIENCE PACKS - LFH & Budget Professiona Instaer Packs, Liquid Resistant, LFH, Retai/Office & Budget Convenience Packs 64 Page TECHNICAL - Thread Data, EMI Screen System, Fire Performance, IP Rating, Chemica Resistance, Cabe Carrying, IEC6186 Cassification CUTTING TOOLS - Kwikcut, Cut-Vice, Rotocut, Swingcut, Cutting Guide & NEW Pipetoos (PipeSice & Pipe-Prep) Cabe Gands & Termina Bocks CABLE GLANDS - Overview, Standard, Euro Index, Index A2P, 90 Swept Ebow Cabe Gand CABLE GLANDS - Index Caw, Fat Cabe, Heat Trace, EMC Cabe Gand CABLE GLANDS - Miniature & Surface Mount Cabe Gands, Threaded Cord Grip CABLE GLANDS - PG - METRIC Adaptors & Reducers, Locknuts & Seaing Washers TERMINAL BLOCKS , 4012, 6012, & Poyamide Termina Bocks, ELK Poyethyene Termina Bocks 81-8 Aquasafe & Energy Management AQUASAFE - Overview, In-Line Range, Bukhead, Seaing Caps & Switched Encosure Range NEW ELKAY ENERGY MANAGEMENT - Overview, energysense, energystye, energyoutdoor INDEX - A TO Z PART NO. LISTING

4 Introduction COMPANY OVERVIEW Adaptafex Estabished in 1972 Adaptafex has deveoped over the past thirty years into a eading payer within the fexibe conduit market. Adaptafex is the market eading fexibe conduit system brand in the UK and in addition is represented throughout the word in a key goba regions. Combining innovative design with dedicated manufacture it offers customers the widest possibe seection of cabe protection products and soutions. With over 6000 products the range covers metaic, non-metaic and composite fexibe conduit systems for the protection of eectrica, coaxia, data and teecommunications cabing. It incudes the easy-to-use, one piece push on Adaptaok fittings for use with nyon, non-metaic conduit, which provide an sea as standard. Cabe gands, termina bocks, connectors and timer contro switches a enhance the range of cabe management products. A UK Company with a Goba Presence Adaptafex is headquartered in Coeshi, Birmingham, Engand. In the UK products are avaiabe through a nationa whoesaing network. A seect group of Super and Premier distributors carry in-depth dedicated stocks, detais of these companies are avaiabe on the Adaptafex website. Wordwide representation is assured through our regiona subsidiaries in the USA and Austraia. These subsidiaries offer fu Saes and Marketing support via a network of agents and distributors in these specific markets. In other countries we have representation via a arge network of distributors working in conjunction with our Export Saes team who are constanty traveing and supporting our overseas activities. We continue to deveop our distributor base and internationa brand representation even further and currenty our products are marketed in more than 40 countries from Europe to the Far East and the America s. Markets and Industries Adaptafex fexibe conduit systems are used to protect critica power and data cabing in a wide range of markets incuding; n Commercia contracting n Machine Toos n Rai n Marine n Automation n Security/CCTV n Data Cabing n Critica Power Many components are designed specificay for a market soution. These products uniquey meet an industry s needs - soving an appication requirement, providing product innovation, saving instaation and component costs and improving the quaity of the end product. The company s commitment to independent testing across a wide range of appications has ed to an impressive number of firsts : n The first and ony conduit manufacturer to achieve the BSI Kitemark, n The first and ony conduit manufacturer to achieve the BS EN ISO14001 Environmenta Standard. n The first manufacturer to achieve the new IEC conduit standard covering the performance characteristics of fexibe conduits. n The first to achieve Loyds Register of shipping type approva for its non-metaic PR, PK and metaic LFH-SP and SPL products way back in n The first to meet IP69K, DIN 40050, standard with its Adaptaok range of non metaic fittings. n The first and ony conduit manufacturer to offer a non-metaic conduit that is fuy compiant to the new dua isted UL 1696 standard. Required for any equipment destined for export to the USA and Canada. n The Hi-Spec PEEK range, designed for the most demanding eectrica appications in rai, underground and pubic buidings, is the ony non-metaic fexibe conduit system fuy compiant with both BS658 Cass 1A requirement and LUL engineering standard

5 Introduction QUALITY APPROVALS Industry Standards As one of the word eading fexibe conduit system manufacturers, Adaptafex has gained many internationa approvas. With company members on eading technica committees and activey ooking at internationa standards, we are abe to use our experience and knowedge to ensure safety and quaity eves are maintained now and in the future. We continuousy monitor our own quaity eves, but we aso go that step further by having our products independenty tested. As a resut you don t have to just take our word for it, in contrast to some other companies our products are certified by independent third party agencies and standards so that you can have every confidence in our products. Third Party Testing & Approvas IEC6186 Performance Cassification Standard Adaptafex is the first major conduit manufacturer to achieve third party accreditation to the IEC 6186 Standard from the British Standards Institution (BSI). IEC6186 conformance guarantees that our products meet performance specifications for fatigue ife, operating temperature, non-fame propagation, IP ratings amongst other criteria. IEC6186 has repaced EN BSI Kitemark Adaptafex is the ony major conduit manufacturer to achieve third party accreditation through the BSI Kitemark scheme. The Kitemark is one of the word s premier symbos of trust, integrity and quaity. Manufacturers with the Kitemark are an eite cub of some of the word s best companies being annuay tested to ensure continued compiance. Having the Kitemark associated with our products iustrates that we have satisfied the most rigorous of quaity processes. ISO9001 Quaity Standard Adaptafex conform to ISO 9001:2000, the internationay recognised standard for Quaity Management Systems. This standard refects the procedures and management processes throughout the whoe of the company. BS EN ISO14001 Environmenta Standard Controing the impact of manufacturing activities on the environment is a major chaenge. Again Adaptafex ead the way by being the first conduit manufacturer to compy with this Standard. We aso meet the requirements of EU directive 2002/95/EC on the restriction of the use of certain hazardous substances (RoHS). This forms part of the egisation on waste management and is aigned with the waste eectrica and eectronic equipment (WEEE). Specificay this means no ead, mercury, cadmium, hexavaent chromium; poybrominated biphenys (PBB) or poybrominated dipheny ethers (PBDE) are used in the manufacture of metaic and nonmetaic fexibe conduit systems. Customer Support A the proof you need backed up by fu technica support team, saes teams, customer care team and in-house marketing speciaists. A dedicated teams working together to ensure that you have the best of support in the market pace. 05

6 Appications COMMERCIAL & CONTRACTING Commercia & Contracting Overview The variety of construction buidings and project requirements within the commercia market is indeed immense. But whatever the chaenge you can be sure that Adaptafex have a soution to meet those specific requirements. In these environments there are ever increasing demands not ony for quicker and easier to insta soutions but aso for increased safety and technica performances to meet the specific needs of municipa buidings. The abiity to offer product ranges with enhanced ow fire hazard properties for safety or overbraiding for security and EMI shieding. Where exposed interiors ca for design consideration there is a choice such as conduit in different coours such as white or in different materias such as stainess stee to compement interior stying - Adaptafex have a range to suit. Product Recommendation n Low fire hazard PA conduit systems n Adaptaok systems n LFH-SP Liquid resistant covered fexibe n stee conduit enhanced ow fire hazard Industry Approved Adaptafex products are approved by a range of recognised industry standards incuding. n BSI Kitemark to IEC6186 n CE marked to the Low Votage Directive n Fuy compiant to BS7671 Wiring Reguations n code of practice Typica Appications n Office Buidings n Schoos n Hospitas (EMC) n Retai Deveopments n Leisure Compexes/Sports Stadiums 06

7 Appications MACHINE TOOLS Machine Toos Overview This market is driven by the needs to meet the best in ean manufacturing. To achieve this every piece of equipment in this sector is pushed for greater efficiency by working more intensey and faster. As a resut any conduit instaed in these appications wi need to provide exceent mechanica strength, fexibiity and abrasion resistance in order to suppy the best possibe soution to provide protection aong the entire ength of a the moving parts. In this hardworking environment of both dynamic and static appications it is essentia that any cabe management products continue to deiver performance in areas where resistance to ois and chemicas is paramount. Any down time in manufacturing can be very costy so products that can offer high ingress protection are fundamenta and Adaptafex can offer a wide range of soutions to meet a of these needs. Product Recommendation n SPL Liquid Tight conduit n PA conduit systems n SPUL for machinery USA export n Overbraided conduit systems Industry Approved Adaptafex products are approved by a range of recognised industry standards incuding. n BSI Kitemark to IEC6186 n CE marked to the Low Votage Directive n Fuy compiant to BS7671 Wiring Reguations n code of practice n UL/CSA /UR Technoogy is increasingy being used in modern machine toos and the need to interface conduit to mutipin-connectors is escaating. Nyon systems continue to gain popuarity in this sector due to their exceent performance, fexibiity and ow instaed cost benefits. For this reason Adaptafex has deveoped a wide range of iquid tight connector interfaces in the Adaptaok range. Typica Appications n Meta Cutting and Fabrication n Miing Machines n CNC Machine Too Technoogy n Mouding Machinery n Wood Turning Equipment n Robotics 07

8 Appications RAIL Rai Overview We work with some of the foremost manufacturers and suppiers of pubic transportation systems throughout the word. Leading corporations such as Astom Transport, Bombardier Transportation and Siemens Transportation are just a few of the companies that have worked with us for specific design soutions, many of which incorporate the benefits of our Adaptaok systems. Our components need to meet a wide variety of environmenta conditions as the very nature of this market can mean our systems are used in extreme environments varying from high temperature to freezing sub-zero conditions. This combined with the need for products that can withstand constant vibrations, water ingress, offer corrosion resistance and be avaiabe made from a haogen free, ow smoke and ow toxicity materia mean that suppying this sector can be one of the most technicay demanding markets. The proof of rising and meeting this chaenge is that we are incuded on many project buid ists. Typica Appications n Outside the Train/Carriage - Impact resistance ow temperature fexing n Inside the Train/Carriage - Low fire hazard systems, weight. n Exposed Locations - impact resistance n Bogie Connections - (Jumpers) impact resistance ow temperature fexing n EMC Protection for safety critica systems n Infrastructure projects - Stations, tunnes, trackside n OEM packages instaed on roing stock Product Recommendation n PA conduit systems n PR enhanced ow fire hazard conduit systems n PI ow temperature fexibe conduit n PK conduit systems n LFH-SP conduit systems n CP conduit system n /67/68/69k Adaptaok/ATS fittings Industry Approved Adaptafex products are approved by a range of recognised industry standards incuding. n LUL (E1042) n SNCF 478 (NFF16-101/102) n Deutsche Bahn (DIN 5510) n BS685 n Siemens Transportation n UR n BSI Kitemark to IEC6186 n CE marked to the Low Votage Directive 08

9 Appications MARINE Marine Overview Safety and reiabiity are vita considerations within one of the harshest operationa environments to be found. Products specified and instaed within this sector have to face the particuar damaging effects from the wind, wave and sat spray conditions in vasty exposed areas. Whist this demands for the most robust of products it aso cas for soutions where vibration and temperature extremes add to the chaenge. Adaptafex offer a broad range of soutions to suit this sector and which take into consideration minimum environmenta impact, corrosion and chemica resistance, ong service ife and ow fire hazard properties. Utiising Adaptaok seaing systems aso offers ingress protection particuary vauabe in pressure washing appications and with our speciaist insert sea raises the IP rating from to IP67/68/69K. Product Recommendation n PA conduit systems n PR conduit systems n /67/68/69k Adaptaok systems n Adaptasea systems n SPL conduit systems n Stainess stee conduit systems Industry Approved Adaptafex products are approved by a range of recognised industry standards incuding. n Loyds Register Approved n UR n BSI Kitemark to IEC6186 n CE marked to the Low Votage Directive Typica Appications n Ship/boat Engine Rooms n Ship and Dock Yards n Leisure Boats & Cruisers n Marina Deveopments n Ocean Going Craft 09

10 Appications AUTOMATION Automation Overview In the fied of automation a cabe management systems need to withstand some grueing conditions concerning fexibiity. Motion intensive, continuous cycing machinery can stress conduit systems in every direction at high speed with repetitive movements incuding swive actions. The abiity to work at high speed for ong periods is a prerequisite with tota reiabiity in hostie or no maintenance appications essentia. Any conduit systems instaed in this environment can be caed on one or a of the foowing properties: high fatigue ife performance; protection for abrasion; be highy fexibe; first-cass puout strength and incude antistatic properties. Adaptafex have been designing soutions for this market for many years and can bring a weath of technica expertise to ensure you have the right product for the job. Product Recommendation n Adaptaring system n PI conduit n Braided conduit Industry Approved Adaptafex products are approved by a range of recognised industry standards incuding: n BSI Kitemark to IEC6186 n CE marked to the Low Votage Directive n Fuy compiant to BS7671 Wiring Reguations n code of practice Typica Appications n Pick and Pace Robotics n Conveyor Systems n Spray Painting and Coating Equipment n Antistatic/Cean Room Appications n Measuring and Testing Automation 10

11 Appications LIMITLESS APPLICATIONS Limitess Appications Overview The range of appications for Adaptafex cabe and energy management systems is amost imitess. Whenever cabe needs protection and wherever cabe connections are required you wi find that Adaptafex have the answer, providing superior systems to cabe management probems for over 0 years. The range of products and variety of materias to choose from are immense. With different materias providing different performance characteristics it is important that you seect not ony the right product for your particuar appication but aso the right materia to give you continued performance where you need it. Adaptafex Appications Engineers offer a breadth of experience gained internationay across a different market sectors. A bespoke design service and expert technica knowedge guarantees that Adaptafex wi find the perfect product soution for your appication. Exampes of individua markets served n Teecommunications n Aviation n Medica n Mining/Quarrying n Automotive n Underground Rai Systems n Security & CCTV n MOD Industry Approved Adaptafex products are approved by a range of recognised industry standards incuding. 11

12 Non-metaic systems Quick Seection Guide Quick Seection Guide - Non-metaic systems TYPE PA LIGHTWEIGHT CONDUIT TYPE PA NEW LIGHTWEIGHT SLIT CONDUIT TYPE PA STANDARD WEIGHT CONDUIT TYPE PA HEAVYWEIGHT CONDUIT TYPE PI NEW LIGHTWEIGHT CONDUIT TYPE PI STANDARD WEIGHT CONDUIT TYPE PI HEAVYWEIGHT CONDUIT TYPE PR STANDARD WEIGHT CONDUIT TYPE PADL NEW STANDARD WEIGHT CONDUIT TYPE CP NEW MEDIUM WEIGHT CONDUIT TYPE KF NEW MEDIUM WEIGHT DRAW-WIRED CONDUIT TYPE KF LIGHTWEIGHT CONDUIT TYPE KF STANDARD WEIGHT CONDUIT TYPE KF HEAVY WEIGHT CONDUIT TYPE PP MEDIUM WEIGHT CONDUIT TYPE XF STANDARD WEIGHT CONDUIT TYPE RF NEW STANDARD WEIGHT CONDUIT TYPE PK LIGHTWEIGHT CONDUIT TYPE PKTC LIGHTWEIGHT CONDUIT TYPE PKSS LIGHTWEIGHT CONDUIT TYPE PRTC STANDARD WEIGHT CONDUIT TYPE PRSS STANDARD WEIGHT CONDUIT Exampe Conduit Materia Covering/Overbraid IP40 IP54 IP65 IP67 IP69k IP RATING - (with appropriate fitting) Static Temp - Min Max UV Resistance Fexibiity Fatigue Life Low Fire Hazard PA6 PA6 PA6 PA6 Pe PA11 PA11 PA6 PA6 CPe PP PVCu PVCu PVCu PP PVCu PVCu PK PK PK PA6 PA6-40 C +120 C Very -40 C +120 C Very -40 C +120 C Very -40 C +120 C Very Medium Medium Standard Standard -40 C +120 C Very -50 C +110 C Very Very Very -50 C +110 C Very Very -40 C +120 C Very -40 C +120 C Very Medium Medium Medium -45 C +15 C Very Very Very Enhanced Standard Standard -5 C +60 C Medium Low -5 C +60 C Piabe Low -5 C +60 C Piabe Low -5 C +60 C Paibe Low -20 C +90 C Medium Pasticised Pasticised PVC PVC -5 C +60 C Very -20 C +60 C Medium Medium Medium Medium -60 C +260 C Very Super Tinned Copper -60 C +260 C Very Super Stainess Stee -60 C +260 C Very Super Tinned Copper -40 C +120 C Very Stainess Stee -40 C +120 C Very Medium Medium Enhanced Enhanced Haogen Free Sef Extinguishing EMI Screen Standard Standard Mechanica Strength Abrasion Resistance Approvas 12 Key Appication Page Number KEY: Commercia Contracting Machine Toos Rai Marine Automation 47

13 Non-metaic systems Conduit, Fittings & Accessories Range Overview Adaptafex have more than 20 different types of non metaic conduit systems a providing different technica properties for your cabe management appications. Conduit is avaiabe in many different materias, ranging from ightweight to heavyweight with nomina conduit sizes from 10mm right up to the Jumbo size of 106mm. For more demanding appications there is a wide-ranging high specification series of conduit with enhanced ow fire hazard properties, EMI screening and incorporating high fatigue ife. Overbraided options are avaiabe for use in abrasive environments. Standard product is manufactured in a wide range of materias. The corrugated construction provides good fexibiity and ow weight. In addition a range of fittings are specificay designed to maintain system System approvas avaiabe: integrity incuding the popuar and easy to fit Adaptaok system. Fitting types are avaiabe in straight, 90, 45, with metric, PG, PF, & NPT threads. Many of our conduit systems have industry recognised approvas incuding British Kitemark, CE Approva, UL 1696, NF, LUL, DB, Loyds Register amongst others. Advantages n Non metaic conduits do not corrode (rust) n Lighter in weight n Quicker to insta (cut & assembe fittings) n Wider variety of fittings - much arger soutions choice n Better fatigue ife n Return to shape Adaptaok ATS The utimate & unique fitting from Adaptafex - See page 24 Ranges incude: 1

14 Non-metaic systems TYPE PA, & PI Non-metaic conduit PRODUCT CHARACTERISTICS To order quote part no, coour & ree ength - e.g. PAFL1/BL/50M TYPE PA LIGHTWEIGHT CONDUIT TYPE PA LIGHTWEIGHT SLIT CONDUIT TYPE PA STANDARD WEIGHT CONDUIT TYPE PA HEAVYWEIGHT CONDUIT Materias Poyamide (Nyon) 6 Coour Back (BL) & Grey (GR). Poyamide (Nyon) 6 Coour Back (BL) ony. Poyamide (Nyon) 6 Coour Back (BL) & Grey (GR). Poyamide (Nyon) 6 Coour Back (BL) & Grey (GR). Exampe NOMINAL CONDUIT SIZE (mm) OUTSIDE DIAMETER (mm) NW CONDUIT SIZE (mm) CONDUIT PITCH F = FINE C= COARSE INSIDE DIAMETER (mm) MINIMUM BEND RADIUS (mm) REEL LENGTH (m) INSIDE DIAMETER (mm) MINIMUM BEND RADIUS (mm) REEL LENGTH (m) INSIDE DIAMETER (mm) MINIMUM BEND RADIUS (mm) REEL LENGTH (m) (Back) REEL LENGTH (m) (Grey) INSIDE DIAMETER (mm) MINIMUM BEND RADIUS (mm) REEL LENGTH (m) F F F F C F C F C C C C C PAFL PAFL PAFL PACL PACL PACL PACL PAFL1-S PAFL16-S PAFL21-S PACL28-S PACL4-S PACL42-S PACL54-S PAFS PAFS PAFS , 25, PAFS , 25, PAFS , 25, PACS , 25, PAFS , 25, PACS , 25, PACS , PACS , PACS PACS PAFH PAFH PACH PACH PACH PACH PACH IP Rating with appropriate fitting For use with foowing fittings; Adaptaok, ATS, Adaptaring & Adaptasea For use with foowing fittings; Adaptaring For use with foowing fittings; Adaptaok, ATS, Adaptaring, Adaptasea & Jumbo For use with foowing fittings; Adaptaok, ATS, Adaptaring & Adaptasea IP40 Adaptaring Fittings Adaptaring & Jumbo Fittings Adaptaring Fittings IP65 Jumbo Fittings + SK Sea Adaptaok, ATS or Adaptasea Fittings Adaptaok, ATSor Adaptasea Fittings Adaptaok, ATS or Adaptasea Fittings IP67 Adaptaok + ALS Sea or ATS, Adaptasea Fittings Adaptaok + ALS Sea or ATS, Adaptasea Fittings Adaptaok + ALS Sea or ATS, Adaptasea Fittings Adaptaok + ALS Sea or ATS, Adaptasea Fittings Adaptaok + ALS Sea or ATS, Adaptasea Fittings Adaptaok + ALS Sea or ATS, Adaptasea Fittings NEW IP69k Adaptaok Fittings + ALS Sea or ATS Static Appications: -40 C to +120 C Moving Appications: -5 C to +120 C Static Appications: -40 C to +120 C Moving Appications: -5 C to +120 C Static Appications: -40 C to +120 C Moving Appications: -5 C to +120 C Static Appications: -40 C to +120 C Moving Appications: -5 C to +120 C UV Resistance Very Very Very Very Fexibiity & Fatigue Life Fexibity - Fatigue Life Fexibity - Fatigue Life Fexibity - Fatigue Life Medium Fexibity - Medium Fatigue Life Fire Performance & EMI Screen Sef Exstinguishing Haogen Free Sef Exstinguishing Haogen Free Approvas 14 System Appications Machinery (Low mechanica protection) Buidings (No fire risk) Retrofit Protection Machinery Pubic Buidings Rai Rai Underground Heavy Industria

15 PRODUCT CHARACTERISTICS TYPE PI LIGHTWEIGHT CONDUIT TYPE PI STANDARD WEIGHT CONDUIT TYPE PI HEAVYWEIGHT CONDUIT Materias Poyester Coour Back (BL) ony. Modified Poyamide 11 Coour Back (BL) & Grey (GR). Modified Poyamide 11 Coour Back (BL) ony. Exampe NOMINAL CONDUIT SIZE (mm) OUTSIDE DIAMETER (mm) NW CONDUIT SIZE (mm) CONDUIT PITCH F = FINE C= COARSE INSIDE DIAMETER (mm) MINIMUM BEND RADIUS (mm) REEL LENGTH (m) INSIDE DIAMETER (mm) MINIMUM BEND RADIUS (mm) REEL LENGTH (m) INSIDE DIAMETER (mm) MINIMUM BEND RADIUS (mm) REEL LENGTH (m) F F F F C C C C C C C PIFL PIFL PIFL PICL PICL PICL PICL PIFS PIFS PIFS PIFS PICS PICS PICS PICS PICS PICS PIFH PIFH PICH PICH PICH PICH PICH IP Rating with appropriate fitting IP40 IP65 IP67 NEW IP69k For use with foowing fittings; Adaptaok, ATS, Adaptaring & Adaptasea Adaptaring Fittings Adaptaok or Adaptasea Fittings Adaptaok + ALS Sea or Adaptasea Fittings Adaptaok + ALS Sea or Adaptasea Fittings For use with foowing fittings; For use with foowing fittings; Adaptaok, ATS, Adaptaring, Adaptasea & Jumbo Adaptaok, ATS, Adaptaring & Adaptasea Adaptaring & Jumbo Fittings Adaptaring Fittings Jumbo Fittings + SK Sea Adaptaok, ATS or Adaptasea Fittings Adaptaok, ATS or Adaptasea Fittings Adaptaok + ALS Sea or ATS, Adaptasea Fittings Adaptaok + ALS Sea or ATS, Adaptasea Fittings Adaptaok + ALS Sea or ATS, Adaptasea Fittings Adaptaok + ALS Sea or ATS, Adaptasea Fittings Adaptaok Fittings + ALS Sea or ATS Static Appications: -25 C to +120 C Moving Appications: -5 C to +105 C Static Appications: -50 C to +110 C Moving Appications: -45 C to +120 C Static Appications: -50 C to +110 C Moving Appications: -45 C to +120 C UV Resistance Very Very Very Fexibiity & Fatigue Life Fexibity - Fatigue Life Very Fexibity - Very Fatigue Life Fexibity - Very Fatigue Life Fire Performance & EMI Screen Sef Exstinguishing Haogen Free Sef Exstinguishing Haogen Free Sef Exstinguishing Haogen Free Approvas System Appications Robots Continua Fexing Appications Rai Robots Low Temperature Fexing Rai Impact Resistance Low Temperature Fexing 15

16 Non-metaic systems TYPE PR, PADL & CP Non-metaic conduit PRODUCT CHARACTERISTICS To order quote part no, coour & ree ength - e.g. PRFS1/BL/25M Materias TYPE PR STANDARD WEIGHT CONDUIT Modified Poyamide (Nyon) 6 Coour Back (BL) ony. TYPE CP MEDIUM WEIGHT CONDUIT Poyester Coour Back (BL) ony. TYPE PADL STANDARD WEIGHT CONDUIT Modified Poyamide (Nyon) 6 Coour Back (BL) ony. TYPE A - ADAPTALOK STRAIGHT FITTING - FIXED EXTERNAL THREAD For insertion into threaded entries & knockouts. Poyamide (Nyon) 66 Coour Back (BL) & Grey (GR). Exampe NOMINAL CONDUIT SIZE (mm) OUTSIDE DIAMETER (mm) NW CONDUIT SIZE (mm) CONDUIT PITCH F = FINE C= COARSE INSIDE DIAMETER (mm) MINIMUM BEND RADIUS (mm) REEL LENGTH (m) INSIDE DIAMETER (mm) MINIMUM BEND RADIUS (mm) REEL LENGTH (m) INSIDE DIAMETER (mm) MINIMUM BEND RADIUS (mm) REEL LENGTH (m) (Back) NOMINAL CONDUIT SIZE (mm) NPT THREAD F F C F C C C C C C C C PRFS PRFS PRFS PRCS PRCS PRCS PRCS PRCS PRCS PRCS CPFM CPFM CPFM CPCM CPCM CPCM CPCM PADL PADL PADL , 50 PADL , 50 PADL , /2 ALD17/050/A 1 /2 ALD22/050/A /4 ALD28/075/A 1 ALD4/100/A 1 1 /4 ALD42/125/A For use ony wth PADL conduit, to maintain the UL 1696 approva TYPE C90 - ADAPTALOK 90 ELBOW FITTING - FIXED EXTERNAL THREAD For insertion into knockouts using a ocknut. Poyamide (Nyon) 66 Coour Back (BL) & Grey (GR). IP Rating with appropriate fitting For use with foowing fittings; Adaptaok, ATS, Adaptaring, Adaptasea & Jumbo For use with foowing fittings; Adaptaok, ATS & Adaptasea For use with foowing fittings; Adaptaok ALD & ATS IP40 Adaptaring & Jumbo Fittings IP65 Jumbo Fittings + SK Sea Adaptaok or Adaptasea Fittings Adaptaok or Adaptasea Fittings ALD or ATS Fittings IP67 NEW IP69k Adaptaok + ALS Sea or Adaptasea Fittings Adaptaok + ALS Sea or Adaptasea Fittings Adaptaok Fittings + ALS Sea Adaptaok Fittings + ALS Sea & Adaptasea Fittings Adaptaok Fittings + ALS Sea & Adaptasea Adaptaok Fittings + ALS Sea ALD + ALS Sea ATS Fittings ALD + ALS Sea ATS Fittings ALD + ALS Sea ATS Fittings NOMINAL CONDUIT SIZE (mm) NPT THREAD UV Resistance Fexibiity & Fatigue Life Fire Performance & EMI Screen Approvas Static Appications: -40 C to +120 C Moving Appications: -5 C to +120 C Very Fexibity - Medium Fatigue Life Static Appications: -50 C to +15 C Moving Appications: -25 C to +150 C Very Very Fexibity - Very Fatigue Life Static Appications: -40 C to +120 C Moving Appications: -18 C to +120 C Very Medium Fexibity - Medium Fatigue Life /2 ALD17/050/C90 1 /2 ALD22/050/C90 /4 ALD28/075/C90 1 ALD4/100/C /4 ALD42/125/C90 For use ony wth PADL conduit, to maintain the UL 1696 approva Note. Other fittings avaiabe. Contact our Saes Office for further detais. 16 System Appications Raiways Underground Pubic Buidings Raiways Underground Pubic Buidings Machinery Pubic Buidings

17 Adaptaok non-metaic system ONE-PIECE PUSH-ON LIQUID TIGHT FITTINGS Materias Exampe PRODUCT CHARACTERISTICS TYPE A - ADAPTALOK STRAIGHT FITTING - FIXED EXTERNAL THREAD For insertion into threaded entries & knockouts. Locknut suppied with ONLY Poyamide (Nyon) 66 Coour Back (BL) & Grey (GR). To order quote part no & coour - e.g. AL10/M12/A/BL TYPE C90 - ADAPTALOK 90 ELBOW FITTING - FIXED EXTERNAL THREAD For insertion into knockouts using a ocknut. Locknut suppied with ONLY Poyamide (Nyon) 66 Coour Back (BL) & Grey (GR). NOMINAL CONDUIT SIZE (mm) ` PG THREAD M12 AL10/M12/A PG7 AL10/PG7/A 1 /4 AL10/PF025/A PG9 AL10/PG9/A M16 AL1/M16/A PG9 AL1/PG9/A /8 AL1/PF08/A /8 AL1/08/A M20 AL1/M20/A PG11 AL1/PG11/A PG1.5 AL1/PG1/A M16 AL16/M16/A PG9 AL16/PG9/A /8 AL16/PF08/A /8 AL16/08/A M20 AL16/M20/A PG11 AL16/PG11/A 1 /2 AL16/PF050/A 1 /2 AL16/050/A PG1.5 AL16/PG1/A PG16 AL16/PG16/A M20 AL21/M20/A PG11 AL21/PG11/A 1 /2 AL21/PF050/A 1 /2 AL21/050/A PG1.5 AL21/PG1/A M25 AL21/M25/A PG16 AL21/PG16/A M25 AL28/M25/A PG21 AL28/PG21/A /4 AL28/PF075/A /4 AL28/075/A M2 AL28/M2/A M2 AL4/M2/A PG29 AL4/PG29/A 1 AL4/PF100/A 1 AL4/100/A M40 AL4/M40/A M40 AL42/M40/A PG6 AL42/PG6/A 1 /4 AL42/PF125/A 1 /4 AL42/125/A M50 AL42/M50/A M50 AL54/M50/A PG48 AL54/PG48/A 1 /2 AL54/PF150/A 1 /2 AL54/150/A M6 AL54/M6/A 2 AL54/PF200/A PF THREAD NPT THREAD PG THREAD M12 AL10/M12/C90 PG7 AL10/PG7/C90 M16 AL1/M16/C90 PG9 AL1/PG9/C90 /8 AL1/PF08/C90 /8 AL1/08/C90 M16 AL16/M16/C90 PG9 AL16/PG9/C90 /8 AL16/PF08/C90 /8 AL16/08/C90 M20 AL16/M20/C90 PG11 AL16/PG11/C90 1 /2 AL16/PF050/C90 1 /2 AL16/050/C90 PG1.5 AL16/PG1/C90 1 /2 AL16/050/C90 M20 AL21/M20/C90 PG1.5 AL21/PG1/C90 1 /2 AL21/PF050/C90 1 /2 AL21/050/C90 PG16 AL21/PG16/C90 M25 AL28/M25/C90 PG21 AL28/PG21/C90 /4 AL28/PF075/C90 /4 AL28/075/C90 M2 AL4/M2/C90 PG29 AL4/PG29/C90 1 AL4/PF100/C90 1 AL4/100/C90 M40 AL42/M40/C90 PG6 AL42/PG6/C90 1 /4 AL42/PF125/C90 1 /4 AL42/125/C90 M50 AL54/M50/C90 PG48 AL54/PG48/C90 1 /2 AL54/PF150/C90 1 /2 AL54/150/C90 M6 AL54/M6/C90 2 AL54/PF200/C90 2 AL54/200/C90 PF THREAD NPT THREAD IP Rating with appropriate fitting IP40 IP65 IP67 NEW IP69k Fitting Characteristics For use with foowing conduit; PA, PI, CP & PR PA, PI, CP & PR conduit PA, PI, CP & PR conduit + ALS Sea PA, PI, CP & PR conduit + ALS Sea PA, PI, CP & PR conduit + ALS Sea Static Appications: -50 C to +120 C Moving Appications: -45 C to +120 C For use with foowing conduit; PA, PI, CP & PR PA, PI, CP & PR conduit PA, PI, CP & PR conduit + ALS Sea PA, PI, CP & PR conduit + ALS Sea PA, PI, CP & PR conduit + ALS Sea Static Appications: -50 C to +120 C Moving Appications: -45 C to +120 C Approvas 17

18 Adaptaok non-metaic system ONE-PIECE PUSH-ON LIQUID TIGHT FITTINGS PRODUCT CHARACTERISTICS To order quote part no & coour - e.g. AL1/M16/45/GR Materias TYPE 45 - ADAPTALOK 45 ELBOW FITTING - FIXED EXTERNAL THREAD For insertion into knockouts using a ocknut. Locknut suppied with ONLY Poyamide (Nyon) 66 Coour Back (BL) & Grey (GR). PUSH-IN - ADAPTALOK STRAIGHT - ONE PIECE COUPLER Inserts into a 20mm knock-out, pane thickness up to 4mm, no ocknut required Poyamide (Nyon) 66 Coour Back (BL) & Grey (GR). -WAY COUPLER -WAY PA66 FITTING For couping to corrugated fexibe conduit Poyamide (Nyon) 66 Coour Back (BL) & Grey (GR). INSERT SEAL IP67/68/69k INSERT SEAL Suitabe for standard weight PA/PI/PR conduit Back or Grey. Thermopastic Eastomer Coour Yeow (Y) ony. Exampe NOMINAL CONDUIT SIZE (mm) PG THREAD NOMINAL CONDUIT SIZE COMBINATION CONDUIT PITCH F = FINE C= COARSE M16 AL1/M16/45 PG9 AL1/PG9/45 M16 AL16/M16/45 PG11 AL16/PG11/45 M20 AL16/M20/45 PG1.5 AL16/PG1/45 M20 AL21/M20/45 PG1.5 AL21/PG1/45 PG16 AL21/PG16/45 M25 AL28/M25/45 PG21 AL28/PG21/45 M2 AL4/M2/45 PG29 AL4/PG29/45 M40 AL42/M40/45 PG6 AL42/PG6/45 M50 AL54/M50/45 PG48 AL54/PG48/45 M6 AL54/M6/45 AL16/KM20/A AL21/KM20/A 1X10X10 AL11010/Y 16X1X1 AL1611/Y 21X16X16 AL211616/Y 28X21X21 AL282121/Y F F F C F F C C C C C C ALS1/F ALS16/F ALS16/F ALS17/C ALS21/F ALS21/F ALS22/C ALS28/C ALS4/C ALS42/C ALS54/C ALS54/C Note. Sea needs to be inserted into the appropriate conduit to upgrade fitting system IP Rating with appropriate fitting For use with foowing conduit; PA, PI, CP & PR For use with foowing conduit; PA, PI, CP & PR For use with foowing conduit; PA, PI, CP & PR For use with foowing fittings; Adaptaok IP40 IP65 PA, PI, CP & PR conduit PA, PI, CP & PR conduit IP67 PA, PI, CP & PR conduit + ALS Sea PA, PI, CP & PR conduit + ALS Sea Adaptaok Fittings PA, PI, CP & PR conduit + ALS Sea PA, PI, CP & PR conduit + ALS Sea Adaptaok Fittings (1.1 bar 5mins) NEW IP69k PA, PI, CP & PR conduit + ALS Sea PA, PI, CP & PR conduit + ALS Sea Adaptaok Fittings (DIN 40050) Static Appications: -50 C to +120 C Moving Appications: -45 C to +120 C Static Appications: -50 C to +120 C Moving Appications: -45 C to +120 C Static Appications: -50 C to +120 C Moving Appications: -45 C to +120 C Static Appications: -50 C to +120 C Moving Appications: -45 C to +120 C Fitting Characteristics Approvas 18

19 PRODUCT CHARACTERISTICS TYPE FL/A - ADAPTALOK STRAIGHT PANEL MOUNTING SWIVEL FLANGE with integra face sea. TYPE FL/C90 - ADAPTALOK 90 ELBOW BODY - PANEL MOUNT FLANGE For pane mounting via 2 hoe fixing & integra face sea. TYPE FL/45 - ADAPTALOK 45 PANEL MOUNTING SWIVEL FLANGE with integra face sea. SWIVEL COUPLER STRAIGHT PA66 BODY - SWIVEL COUPLER For couping to corrugated fexibe conduit. Materias Poyamide (Nyon) 66 Coour Back (BL) & Grey (GR). Poyamide (Nyon) 66 Coour Back (BL) & Grey (GR). Poyamide (Nyon) 66 Coour Back (BL) & Grey (GR). Poyamide (Nyon) 66 + Auminium Coour Back (BL) ony. Exampe NOMINAL CONDUIT SIZE (mm) AL16/FL/A AL21/FL/A AL28/FL/A - - AL54/FL/A AL1/FL/C90 AL16/FL/C90 AL21/FL/C90 AL28/FL/C90 AL4/FL/90* AL42/FL/90* AL54/FL/90* *TYPE FL/90 - ADAPTALOK 90 ELBOW FITTING - PANEL MOUNT FLANGE For pane mounting via 4 hoe fixing & integra face sea. - AL16/FL/45 AL21/FL/45 AL28/FL/ AL54/FL/45 AL1-AL1/A/ AL16-AL16/A/ AL21-AL21/A/ AL28-AL28/A/ AL4-AL4/A/ AL42-AL42/A/ AL54-AL54/A/ IP Rating with appropriate fitting For use with foowing conduit; PA, PI, CP & PR For use with foowing conduit; PA, PI, CP & PR For use with foowing conduit; PA, PI, CP & PR For use with foowing conduit; PA, PI, CP & PR IP40 IP65 PA, PI, CP & PR conduit PA, PI, CP & PR conduit PA, PI, CP & PR conduit PA, PI, CP & PR conduit IP67 PA, PI, CP & PR conduit + ALS Sea PA, PI, CP & PR conduit + ALS Sea PA, PI, CP & PR conduit + ALS Sea PA, PI, CP & PR conduit + ALS Sea PA, PI, CP & PR conduit + ALS Sea PA, PI, CP & PR conduit + ALS Sea PA, PI, CP & PR conduit + ALS Sea PA, PI, CP & PR conduit + ALS Sea NEW IP69k PA, PI, CP & PR conduit + ALS Sea PA, PI, CP & PR conduit + ALS Sea PA, PI, CP & PR conduit + ALS Sea PA, PI, CP & PR conduit + ALS Sea Static Appications: -50 C to +120 C Moving Appications: -45 C to +120 C Static Appications: -50 C to +120 C Moving Appications: -45 C to +120 C Static Appications: -50 C to +120 C Moving Appications: -45 C to +120 C Static Appications: -50 C to +120 C Moving Appications: -45 C to +120 C Fitting Characteristics ONLY FL/C90 Approvas 19

20 Adaptaok non-metaic system ONE-PIECE PUSH-ON LIQUID TIGHT FITTINGS WITH SWIVEL BRASS THREADS PRODUCT CHARACTERISTICS To order quote part no & coour - e.g. AL1/M16/SA/GR TYPE SA - ADAPTALOK STRAIGHT FITTING - SWIVEL EXTERNAL MALE THREAD For insertion into threaded entries & knockouts. TYPE CS90 - ADAPTALOK 90 ELBOW FITTING - SWIVEL EXTERNAL MALE THREAD For insertion into threaded entries & knockouts. TYPE S45 - ADAPTALOK 45 ELBOW BODY - SWIVEL EXTERNAL MALE THREAD For insertion into threaded entries & knockouts. Materias Poyamide (Nyon) 66. Nicke pated brass thread. Coour Back (BL) & Grey (GR). Poyamide (Nyon) 66. Nicke pated brass thread. Coour Back (BL) & Grey (GR). Poyamide (Nyon) 66. Nicke pated brass thread. Coour Back (BL) & Grey (GR). Exampe NOMINAL CONDUIT SIZE (mm) PG THREAD PG THREAD PG THREAD M16 AL1/M16/SA/ PG9 AL1/PG9/SA/ M16 AL16/M16/SA/ PG11 AL16/PG11/SA/ M20 AL21/M20/SA/ PG1.5 AL21/PG1/SA/ PG16 AL21/PG16/SA/ M25 AL28/M25/SA/ PG21 AL28/PG21/SA/ M2 AL4/M2/SA/ PG29 AL4/PG29/SA/ M40 AL42/M40/SA/ PG6 AL42/PG6/SA/ M50 AL54/M50/SA/ PG48 AL54/PG48/SA/ M6 AL54/M6/SA/ M16 AL1/M16/CS90/ PG9 AL1/PG9/CS90/ M16 AL16/M16/CS90/ PG11 AL16/PG11/CS90/ M20 AL21/M20/CS90/ PG1.5 AL21/PG1/CS90/ PG16 AL21/PG16/CS90/ M25 AL28/M25/CS90/ PG21 AL28/PG21/CS90/ M2 AL4/M2/CS90/ PG29 AL4/PG29/CS90/ M40 AL42/M40/CS90/ PG6 AL42/PG6/CS90/ M50 AL54/M50/CS90/ PG48 AL54/PG48/CS90/ M6 AL54/M6/CS90/ M16 AL1/M16/S45/ PG9 AL1/PG9/S45/ M16 AL16/M16/S45/ PG11 AL16/PG11/S45/ M20 AL21/M20/S45/ PG1.5 AL21/PG1/S45/ PG16 AL21/PG16/S45/ M25 AL28/M25/S45/ PG21 AL28/PG21/S45/ M2 AL4/M2/S45/ PG29 AL4/PG29/S45/ M40 AL42/M40/S45/ PG6 AL42/PG6/S45/ M50 AL54/M50/S45/ PG48 AL54/PG48/S45/ M6 AL54/M6/S45/ IP Rating with appropriate fitting For use with foowing conduit; PA, PI, CP & PR For use with foowing conduit; PA, PI, CP & PR For use with foowing conduit; PA, PI, CP & PR IP40 IP65 PA, PI, CP & PR conduit PA, PI, CP & PR conduit PA, PI, CP & PR conduit IP67 PA, PI, CP & PR conduit + ALS Sea PA, PI, CP & PR conduit + ALS Sea PA, PI, CP & PR conduit + ALS Sea PA, PI, CP & PR conduit + ALS Sea PA, PI, CP & PR conduit + ALS Sea PA, PI, CP & PR conduit + ALS Sea NEW IP69k PA, PI, CP & PR conduit + ALS Sea PA, PI, CP & PR conduit + ALS Sea PA, PI, CP & PR conduit + ALS Sea Static Appications: -50 C to +120 C Moving Appications: -45 C to +120 C Static Appications: -50 C to +120 C Moving Appications: -45 C to +120 C Static Appications: -50 C to +120 C Moving Appications: -45 C to +120 C Fitting Characteristics Approvas 20

21 PRODUCT CHARACTERISTICS TYPE SFA - ADAPTALOK STRAIGHT BODY - SWIVEL INTERNAL FEMALE THREAD For attachment to externa threads & other fittings. TYPE CSF90 - ADAPTALOK 90 ELBOW FITTING - SWIVEL INTERNAL FEMALE THREAD For attachment to externa threads & other fittings. TYPE SF45 - ADAPTALOK 45 ELBOW BODY - SWIVEL INTERNAL FEMALE THREAD For attachment to externa threads & other fittings. Materias Poyamide (Nyon) 66. Nicke pated brass thread. Coour Back (BL) & Grey (GR). Poyamide (Nyon) 66. Nicke pated brass thread. Coour Back (BL) & Grey (GR). Poyamide (Nyon) 66. Nicke pated brass thread. Coour Back (BL) & Grey (GR). Exampe NOMINAL CONDUIT SIZE (mm) PG THREAD PG THREAD PG THREAD M16 AL1/M16/SFA/ PG9 AL1/PG9/SFA/ M16 AL16/M16/SFA/ PG11 AL16/PG11/SFA/ M20 AL21/M20/SFA/ PG1.5 AL21/PG1/SFA/ PG16 AL21/PG16/SFA/ M25 AL28/M25/SFA/ PG21 AL28/PG21/SFA/ M2 AL4/M2/SFA/ PG29 AL4/PG29/SFA/ M40 AL42/M40/SFA/ PG6 AL42/PG6/SFA/ M50 AL54/M50/SFA/ PG48 AL54/PG48/SFA/ M6 AL54/M6/SFA/ M16 AL1/M16/CSF90/ PG9 AL1/PG9/CSF90/ M16 AL16/M16/CSF90/ PG11 AL16/PG11/CSF90/ M20 AL21/M20/CSF90/ PG1.5 AL21/PG1/CSF90/ PG16 AL21/PG16/CSF90/ M25 AL28/M25/CSF90/ PG21 AL28/PG21/CSF90/ M2 AL4/M2/CSF90/ PG29 AL4/PG29/CSF90/ M40 AL42/M40/CSF90/ PG6 AL42/PG6/CSF90/ M50 AL54/M50/CSF90/ PG48 AL54/PG48/CSF90/ M16 AL1/M16/SF45/ PG9 AL1/PG9/SF45/ M16 AL16/M16/SF45/ PG11 AL16/PG11/SF45/ M20 AL21/M20/SF45/ PG1.5 AL21/PG1/SF45/ PG16 AL21/PG16/SF45/ M25 AL28/M25/SF45/ PG21 AL28/PG21/SF45/ M2 AL4/M2/SF45/ PG29 AL4/PG29/SF45/ M40 AL42/M40/SF45/ PG6 AL42/PG6/SF45/ M50 AL54/M50/SF45/ PG48 AL54/PG48/SF45/ IP Rating with appropriate fitting For use with foowing conduit; PA, PI, CP & PR For use with foowing conduit; PA, PI, CP & PR For use with foowing conduit; PA, PI, CP & PR IP40 IP65 PA, PI, CP & PR conduit PA, PI, CP & PR conduit PA, PI, CP & PR conduit IP67 PA, PI, CP & PR conduit + ALS Sea PA, PI, CP & PR conduit + ALS Sea PA, PI, CP & PR conduit + ALS Sea PA, PI, CP & PR conduit + ALS Sea PA, PI, CP & PR conduit + ALS Sea PA, PI, CP & PR conduit + ALS Sea NEW IP69k PA, PI, CP & PR conduit + ALS Sea PA, PI, CP & PR conduit + ALS Sea PA, PI, CP & PR conduit + ALS Sea Static Appications: -50 C to +120 C Moving Appications: -45 C to +120 C Static Appications: -50 C to +120 C Moving Appications: -45 C to +120 C Static Appications: -50 C to +120 C Moving Appications: -45 C to +120 C Fitting Characteristics Approvas 21

22 Adaptaok non-metaic system UNEF CIRCULAR CONNECTOR FITTINGS (MIL C 5015) PRODUCT CHARACTERISTICS To order quote part no & insert e.g. AL1/U06/A/ TYPE A - ADAPTALOK STRAIGHT BODY - SWIVEL INTERNAL THREAD For couping to UNEF circuar connectors. TYPE C90 - ADAPTALOK 90 ELBOW BODY - SWIVEL INTERNAL THREAD For couping to UNEF circuar connectors. TYPE 45 - ADAPTALOK 45 ELBOW BODY - SWIVEL INTERNAL THREAD For couping to UNEF circuar connectors. Materias Poyamide (Nyon) 66 & Auminium Coour Back (BL) ony. Poyamide (Nyon) 66 & Auminium Coour Back (BL) ony. Poyamide (Nyon) 66 & Auminium Coour Back (BL) ony. Exampe NOMINAL CONDUIT SIZE (mm) CONNECTOR UNEF THREAD NOMINAL CONDUIT SIZE (mm) CONNECTOR UNEF THREAD NOMINAL CONDUIT SIZE (mm) CONNECTOR UNEF THREAD NOMINAL CONDUIT SIZE (mm) CONNECTOR UNEF THREAD NOMINAL CONDUIT SIZE (mm) CONNECTOR UNEF THREAD NOMINAL CONDUIT SIZE (mm) CONNECTOR UNEF THREAD AL1/U06/A/ AL1/U075/A/ AL1/U088/A/ AL16/U06/A/ AL16/U075/A/ AL16/U081/A/ AL16/U088/A/ AL16/U094/A/ AL16/U100/A/ AL16/U119/A/ AL16/U11/A/ AL21/U075/A/ AL21/U088/A/ AL21/U094/A/ AL21/U100/A/ AL21/U11/A/ AL21/U119/A/ AL21/U11/A/ AL21/U18/A/ AL21/U144/A/ AL21/U175/A/ AL28/U088/A/ AL28/U094/A/ AL28/U100/A/ AL28/U119/A/ AL28/U18/A/ AL28/U144/A/ AL28/U175/A/ AL28/U200/A/ AL28/U225/A/ AL4/U100/A/ AL4/U119/A/ AL4/U144/A/ AL4/U175/A/ AL4/U200/A/ AL42/U175/A/ AL42/U200/A/ AL1/U06/C90/ AL1/U075/C90/ AL1/U088/C90/ AL16/U06/C90/ AL16/U075/C90/ AL16/U081/C90/ AL16/U088/C90/ AL16/U094/C90/ AL16/U100/C90/ AL16/U119/C90/ AL16/U11/C90/ AL21/U075/C90/ AL21/U088/C90/ AL21/U094/C90/ AL21/U100/C90/ AL21/U11/C90/ AL21/U119/C90/ AL21/U11/C90/ AL21/U18/C90/ AL21/U144/C90/ AL21/U175/C90/ AL28/U088/C90/ AL28/U094/C90/ AL28/U100/C90/ AL28/U119/C90/ AL28/U18/C90/ AL28/U144/C90/ AL28/U175/C90/ AL28/U200/C90/ AL28/U225/C90/ AL4/U100/C90/ AL4/U119/C90/ AL4/U144/C90/ AL4/U175/C90/ AL4/U200/C90/ AL42/U175/C90/ AL42/U200/C90/ AL1/U06/45/ AL1/U075/45/ AL1/U088/45/ AL16/U06/45/ AL16/U075/45/ AL16/U081/45/ AL16/U088/45/ AL16/U094/45/ AL16/U100/45/ AL16/U119/45/ AL16/U11/45/ AL21/U075/45/ AL21/U088/45/ AL21/U094/45/ AL21/U100/45/ AL21/U11/45/ AL21/U119/45/ AL21/U11/45/ AL21/U18/45/ AL21/U144/45/ AL21/U175/45/ AL28/U088/45/ AL28/U094/45/ AL28/U100/45/ AL28/U119/45/ AL28/U18/45/ AL28/U144/45/ AL28/U175/45/ AL28/U200/45/ AL28/U225/45/ AL4/U100/45/ AL4/U119/45/ AL4/U144/45/ AL4/U175/45/ AL4/U200/45/ AL42/U175/45/ AL42/U200/45/ IP Rating with appropriate fitting For use with foowing conduit; PA, PI, CP & PR IP40 PA, PI, CP & PR conduit PA, PI, CP & PR conduit + ALS Sea PA, PI, CP & PR conduit + ALS Sea PA, PI, CP & PR conduit + ALS Sea For use with foowing conduit; PA, PI, CP & PR PA, PI, CP & PR conduit PA, PI, CP & PR conduit + ALS Sea PA, PI, CP & PR conduit + ALS Sea PA, PI, CP & PR conduit + ALS Sea For use with foowing conduit; PA, PI, CP & PR PA, PI, CP & PR conduit PA, PI, CP & PR conduit + ALS Sea PA, PI, CP & PR conduit + ALS Sea PA, PI, CP & PR conduit + ALS Sea IP65 IP67 NEW IP69k Static Appications: -50 C to +120 C Moving Appications: -45 C to +120 C Static Appications: -50 C to +120 C Moving Appications: -45 C to +120 C Static Appications: -50 C to +120 C Moving Appications: -45 C to +120 C Fitting Characteristics Approvas 22

23 Jumbo non-metaic system CLIP TOGETHER IP40 FITTINGS PRODUCT CHARACTERISTICS TYPE FL/A - ADAPTALOK STRAIGHT PANEL MOUNTING SWIVEL FLANGE with integra face sea. TYPE CP/90 COUPLER 90 COUPLER For couping to corrugated fexibe conduit. TYPE FL/90 - ADAPTALOK 90 JUMBO FLANGE with integra face sea. TYPE SK SEALING KIT For use with JUMBO Fittings to achieve IP65. Consists of 2 seaing washers & O rings per kit. Materias Poyamide (Nyon) 66 Coour Back (BL) & Grey (GR). Poyamide (Nyon) 66 Coour Back (BL) & Grey (GR). Poyamide (Nyon) 66 Coour Back (BL) & Grey (GR). Rubber Coour Back (BL) ony. Exampe NOMINAL CONDUIT SIZE (mm) NOMINAL SIZE (mm) ADC80/FLA/A ADC106/FLA/A NOMINAL SIZE (mm) ADC80/FLA/A ADC106/FLA/A NOMINAL CONDUIT SIZE (mm) PART NUMBER ADC80/FL/A ADC106/FL/A ADC80/CP/90 ADC106/CP/90 ADC80/FL/90 ADC106/FL/90 80 SK SK106 A A B B C C D D E Ø E F F Ø IP Rating with appropriate fitting For use with foowing conduit; PA, PI & PR JUMBO ony For use with foowing conduit; PA, PI & PR JUMBO ony For use with foowing conduit; PA, PI & PR JUMBO ony IP40 PA, PI & PR JUMBO conduit PA, PI & PR JUMBO conduit PA, PI & PR JUMBO conduit IP65 PA, PI & PI JUMBO conduit + SK Sea PA, PI & PI JUMBO conduit + SK Sea PA, PI & PI JUMBO conduit + SK Sea IP67 IP69k Static Appications: -50 C to +120 C Moving Appications: -45 C to +120 C Static Appications: -50 C to +120 C Moving Appications: -45 C to +120 C Static Appications: -50 C to +120 C Moving Appications: -45 C to +120 C Fitting Characteristics Approvas 2

24 What is Adaptaok ATS? NEW The Unique and Utimate new non metaic conduit system Adaptaok ATS from Adaptafex Adaptaok ATS represents a unique and innovative soution in fexibe conduit systems. Unti now, manufacturers have produced fittings and seas separatey, and assembed them together, or had the customer assembe them. This increases assemby time and introduces the possibiity for errors. Adaptaok ATS uses a sophisticated mouding process to moud an interna conduit sea and a face sea washer. This makes instaation times very fast, and extremey reiabe, because the seas cannot be eft out. The conduit system aso benefits from the highest IP rating possibe. Key Features Integra Face Sea Washer - guaranteed fit, cannot be ost or fitted incorrecty. No assemby Visibiity Eastomer - visibe confirmation points Interna Eastomer Conduit Sea - guaranteed fit, cannot be ost or fitted incorrecty. No Assemby & protects cabes Thread Data - thread size ceary indicated on fitting thread Additiona Key Features Conduit Data - conduit size ceary indicated on fitting n Nyon 6.6 Body n, 67, 68 & 69k performance as standard Proven Cip Design - pitch independent, ensures secure fitment to coarse & fine pitch conduits n One piece fitting, no customer assemby n UL 1696 version - Light Bue Eastomer Visua Fitting Guides - highy visibe eastomer markings on ugs, aids correct fitment 24

25 Adaptaok ATS non-metaic system NEW ONE-PIECE PUSH-ON LIQUID TIGHT /69k FITTINGS Materias Exampe PRODUCT CHARACTERISTICS TYPE A - ADAPTALOK ATS NEW STRAIGHT FITTING - FIXED EXTERNAL THREAD For insertion into knockouts using a ocknut. Locknut suppied with METRIC thread Poyamide (Nyon) 66/TPE Body Coour Back (BL) & Grey (GR). Yeow (Y) Eastomer To order quote part no, body coour & eastomer coour- e.g. AT21/M20/C90/BLY TYPE A - ADAPTALOK ATS NEW STRAIGHT FITTING - FIXED EXTERNAL THREAD For insertion into knockouts using a ocknut. Locknut suppied with METRIC thread Poyamide (Nyon) 66/TPE Body Coour Back (BL) & Grey (GR). Bue (B) Eastomer NOMINAL CONDUIT SIZE (mm) /22 21/ PF THREAD NPT THREAD M16 AT1/M16/A /8 AT1/PF08/A /8 AT1/08/A M20 AT1/M20/A M16 AT16/M16/A /8 AT16/PF08/A /8 AT16/08/A M20 AT16/M20/A 1 /2 AT16/PF050/A 1 /2 AT16/050/A M20 AT21/M20/A 1 /2 AT21/PF050/A 1 /2 AT21/050/A M25 AT21/M25/A M25 AT28/M25/A /4 AT28/PF075/A /4 AT28/075/A M2 AT28/M2/A M2 AT4/M2/A 1 AT4/PF100/A 1 AT4/100/A M40 AT4/M40/A M40 AT42/M40/A 1 /4 AT42/PF125/A 1 /4 AT42/125/A M50 AT42/M50/A M50 AT48/M50/A 1 /2 AT48/PF150/A 1 /2 AT48/150/A M50 AT54/M50/A M6 AT54/M6/A 2 AT54/PF200/A 2 AT54/200/A NPT THREAD M16 AT1/M16/A /8 AT1/08/A M20 AT1/M20/A M16 AT16/M16/A /8 AT16/08/A M20 AT16/M20/A 1 /2 AT16/050/A M20 AT21/M20/A 1 /2 AT21/050/A M25 AT21/M25/A M25 AT28/M25/A /4 AT28/075/A M2 AT28/M2/A M2 AT4/M2/A 1 AT4/100/A M40 AT4/M40/A M40 AT42/M40/A 1 /4 AT42/125/A M50 AT42/M50/A M50 AT48/M50/A 1 /2 AT48/150/A M50 AT54/M50/A M6 AT54/M6/A 2 AT54/200/A Add body & eastomer coour to part no. /BLY, /BLB, /GRY, or /GRB IP Rating with appropriate fitting IP67 IP69k For use with foowing conduit; PA. PI, CP, PR & PADL (4 bar 0 mins) For use with foowing conduit; PA. PI, CP, PR & PADL (4 bar 0 mins) Static Appications: -50 C to +120 C Moving Appications: -45 C to +120 C Static Appications: -50 C to +120 C Moving Appications: -45 C to +120 C Fitting Characteristics Approvas 25

26 Adaptaok ATS non-metaic system NEW ONE-PIECE PUSH-ON LIQUID TIGHT /69k FITTINGS Materias PRODUCT CHARACTERISTICS TYPE C90 - ADAPTALOK ATS NEW 90 ELBOW FITTING - FIXED EXTERNAL THREAD For insertion into knockouts using a ocknut. Locknut suppied with METRIC thread Poyamide (Nyon) 66/TPE Body Coour Back (BL) & Grey (GR). Yeow (Y) Eastomer To order quote part no, body coour & eastomer coour- e.g. AT21/M20/C90/BLY TYPE C90 - ADAPTALOK ATS NEW 90 ELBOW FITTING - FIXED EXTERNAL THREAD For insertion into knockouts using a ocknut. Locknut suppied with METRIC thread Poyamide (Nyon) 66/TPE Body Coour Back (BL) & Grey (GR). Bue (B) Eastomer Exampe NOMINAL CONDUIT SIZE (mm) / PF THREAD M16 AT1/M16/C90 /8 AT1/PF08/C90 /8 AT1/08/C90 M16 AT16/M16/C90 /8 AT16/PF08/C90 /8 AT16/08/C90 M20 AT16/M20/C90 1 /2 AT16/PF050/C90 1 /2 AT16/050/C90 M20 AT21/M20/C90 1 /2 AT21/PF050/C90 1 /2 AT21/050/C90 M25 AT28/M25/C90 /4 AT28/PF075/C90 /4 AT28/075/C90 M2 AT4/M2/C90 1 AT4/PF100/C90 1 AT4/100/C90 M40 AT42/M40/C90 1 /4 AT42/PF125/C90 1 /4 AT42/125/C90 M50 AT48/M50/C90 1 /2 AT48PF150/C90 1 /2 AT48/150/C90 M50 AT54/M50/C90 1 /2 AT54/PF150/C90 1 /2 AT54/150/C90 M6 AT54/M6/C90 2 AT54/PF200/C90 2 AT54/200/C90 NPT THREAD NPT THREAD M16 AT1/M16/C90 /8 AT1/08/C90 M16 AT16/M16/C90 /8 AT16/08/C90 M20 AT16/M20/C90 1 /2 AT16/050/C90 M20 AT21/M20/C90 1 /2 AT21/050/C90 M25 AT28/M25/C90 /4 AT28/075/C90 M2 AT4/M2/C90 1 AT4/100/C90 M40 AT42/M40/C90 1 /4 AT42/125/C90 M50 AT48/M50/C90 1 /2 AT48/150/C90 M50 AT54/M50/C90 1 /2 AT54/150/C90 M6 AT54/M6/C90 2 AT54/200/C90 Add body & eastomer coour to part no. /BLY, /BLB, /GRY, or /GRB IP Rating with appropriate fitting IP67 IP69k For use with foowing conduit; PA. PI, CP, PR & PADL (4 bar 0 mins) For use with foowing conduit; PA. PI, CP, PR & PADL (4 bar 0 mins) Static Appications: -50 C to +120 C Moving Appications: -45 C to +120 C Static Appications: -50 C to +120 C Moving Appications: -45 C to +120 C Fitting Characteristics Approvas 26

27 Materias PRODUCT CHARACTERISTICS TYPE 45 - ADAPTALOK ATS NEW 45 ELBOW FITTING - FIXED EXTERNAL THREAD For insertion into knockouts using a ocknut. Locknut suppied with METRIC thread Poyamide (Nyon) 66/TPE Body Coour Back (BL) & Grey (GR). Yeow (Y) Eastomer To order quote part no, body coour & eastomer coour- e.g. AT54/M6/45/BLB TYPE 45 - ADAPTALOK ATS NEW 45 ELBOW FITTING - FIXED EXTERNAL THREAD For insertion into knockouts using a ocknut. Locknut suppied with METRIC thread Poyamide (Nyon) 66/TPE Body Coour Back (BL) & Grey (GR). Bue (B) Eastomer Exampe NOMINAL CONDUIT SIZE (mm) / PF THREAD M16 AT1/M16/45 /8 AT1/PF08/45 /8 AT1/08/45 M16 AT16/M16/45 /8 AT16/PF08/45 /8 AT16/08/45 M20 AT16/M20/45 1 /2 AT16/PF050/45 1 /2 AT16/050/45 M20 AT21/M20/45 1 /2 AT21/PF050/45 1 /2 AT21/050/45 M25 AT28/M25/45 /4 AT28/PF075/45 /4 AT28/075/45 M2 AT4/M2/45 1 AT4/PF100/45 1 AT4/100/45 M40 AT42/M40/45 1 /4 AT42/PF125/45 1 /4 AT42/125/45 M50 AT48/M50/45 1 /2 AT48/PF150/45 1 /2 AT48/150/45 M50 AT54/M50/45 NPT THREAD NPT THREAD M16 AT1/M16/45 /8 AT1/08/45 M16 AT16/M16/45 /8 AT16/08/45 M20 AT16/M20/45 1 /2 AT16/050/45 M20 AT21/M20/45 1 /2 AT21/050/45 M25 AT28/M25/45 /4 AT28/075/45 M2 AT4/M2/45 1 AT4/100/45 M40 AT42/M40/45 1 /4 AT42/125/45 M50 AT48/M50/45 1 /2 AT48/150/45 M50 AT54/M50/45 Add body & eastomer coour to part no. /BLY, /BLB, /GRY, or /GRB IP Rating with appropriate fitting IP67 IP69k For use with foowing conduit; PA. PI, CP, PR & PADL (4 bar 0 mins) For use with foowing conduit; PA. PI, CP, PR & PADL (4 bar 0 mins) Static Appications: -50 C to +120 C Moving Appications: -45 C to +120 C Static Appications: -50 C to +120 C Moving Appications: -45 C to +120 C Fitting Characteristics Approvas 27

28 Adaptaok ATS non-metaic system NEW ONE-PIECE PUSH-ON LIQUID TIGHT /69k FITTINGS WITH SWIVEL BRASS THREADS Materias Exampe PRODUCT CHARACTERISTICS TYPE SA - ADAPTALOK ATS NEW STRAIGHT FITTING - SWIVEL EXTERNAL MALE THREAD For insertion into threaded entries & knockouts. Order ocknuts separatey. Poyamide (Nyon) 66. Nicke pated brass thread/tpe Body Coour Back (BL) & Grey (GR). Yeow (Y) & Bue (B) Eastomer To order quote part no, body coour & eastomer coour- e.g. AT16/M16/SA/BLY TYPE CS90 - ADAPTALOK ATS NEW 90 ELBOW FITTING - SWIVEL EXTERNAL MALE THREAD For insertion into threaded entries & knockouts. Order ocknuts separatey. Poyamide (Nyon) 66. Nicke pated brass thread/tpe Body Coour Back (BL) & Grey (GR). Yeow (Y) & Bue (B) Eastomer NOMINAL CONDUIT SIZE (mm) / M16 AT1/M16/SA /8 AT1/08/SA M16 AT16/M16/SA /8 AT16/08/SA M20 AT21/M20/SA 1 /2 AT21/050/SA M25 AT28/M25/SA /4 AT28/075/SA M2 AT4/M2/SA 1 AT4/100/SA M40 AT42/M40/SA 1 /4 AT42/125/SA M50 AT48/M50/SA 1 /2 AT48/150/SA M50 AT54/M50/SA M6 AT54/M6/SA 2 AT54/200/SA NPT THREAD M16 AT1/M16/CS90 /8 AT1/08/CS90 M16 AT16/M16/CS90 /8 AT16/08/CS90 M20 AT21/M20/CS90 1 /2 AT21/050/CS90 M25 AT28/M25/CS90 /4 AT28/075/CS90 M2 AT4/M2/CS90 1 AT4/100/CS90 M40 AT42/M40/CS90 1 /4 AT42/125/CS90 M50 AT48/M50/CS90 1 /2 AT48/150/CS90 M50 AT54/M50/CS90 M6 AT54/M6/CS90 2 AT54/200/CS90 NPT THREAD Add body & eastomer coour to part no. /BLY, /BLB, /GRY, or /GRB NOTE: Specia Big Bore & PF/GAS meta threads are avaiabe as made to order. Contact us for detais IP Rating with appropriate fitting IP67 IP69k For use with foowing conduit; PA. PI, CP, PR & PADL (4 bar 0 mins) For use with foowing conduit; PA. PI, CP, PR & PADL (4 bar 0 mins) Static Appications: -50 C to +120 C Moving Appications: -45 C to +120 C Static Appications: -50 C to +120 C Moving Appications: -45 C to +120 C Fitting Characteristics Approvas 28

29 Materias Exampe PRODUCT CHARACTERISTICS TYPE S45 - ADAPTALOK ATS NEW 45 ELBOW BODY - SWIVEL EXTERNAL MALE THREAD For insertion into threaded entries & knockouts. Order ocknuts separatey. Poyamide (Nyon) 66. Nicke pated brass thread/tpe Body Coour Back (BL) & Grey (GR). Yeow (Y) & Bue (B) Eastomer TYPE SFA - ADAPTALOK ATS NEW STRAIGHT BODY - SWIVEL INTERNAL FEMALE THREAD For attachment to externa threads & other fittings. Order ocknuts separatey. Poyamide (Nyon) 66. Nicke pated brass thread/tpe Body Coour Back (BL) & Grey (GR). Yeow (Y) & Bue (B) Eastomer NOMINAL CONDUIT SIZE (mm) / M16 AT1/M16/S45 /8 AT1/08/S45 M16 AT16/M16/S45 /8 AT16/08/S45 M20 AT21/M20/S45 1 /2 AT21/050/S45 M25 AT28/M25/S45 /4 AT28/075/S45 M2 AT4/M2/S45 1 AT4/100/S45 M40 AT42/M40/S45 1 /4 AT42/125/S45 M50 AT48/M50/S45 1 /2 AT48/150/S45 M50 AT54/M50/S45 M6 AT54/M6/S45 2 AT54/200/S45 NPT THREAD M16 AT1/M16/SFA /8 AT1/08/SFA M16 AT16/M16/SFA /8 AT16/08/SFA M20 AT21/M20/SFA 1 /2 AT21/050/SFA M25 AT28/M25/SFA /4 AT28/075/SFA M2 AT4/M2/SFA 1 AT4/100/SFA M40 AT42/M40/SFA 1 /4 AT42/125/SFA M50 AT48/M50/SFA 1 /2 AT48/150/SFA M50 AT54/M50/SFA M6 AT54/M6/SFA 2 AT54/200/SFA NPT THREAD Add body & eastomer coour to part no. /BLY, /BLB, /GRY, or /GRB NOTE: Specia Big Bore & PF/GAS meta threads are avaiabe as made to order. Contact us for detais IP Rating with appropriate fitting IP67 IP69k For use with a conduits in this cataogue (4 bar 0 mins) For use with a conduits in this cataogue (4 bar 0 mins) Static Appications: -50 C to +120 C Moving Appications: -45 C to +120 C Static Appications: -50 C to +120 C Moving Appications: -45 C to +120 C Fitting Characteristics Approvas 29

30 Adaptaok ATS non-metaic system NEW ONE-PIECE PUSH-ON LIQUID TIGHT /69k FITTINGS WITH SWIVEL BRASS THREADS Materias Exampe PRODUCT CHARACTERISTICS TYPE CSF90 - ADAPTALOK ATS NEW 90 ELBOW FITTING - SWIVEL INTERNAL FEMALE THREAD For attachment to externa threads & other fittings. Order ocknuts separatey. Poyamide (Nyon) 66. Nicke pated brass thread/tpe Body Coour Back (BL) & Grey (GR). Yeow (Y) & Bue (B) Eastomer To order quote part no, body coour & eastomer coour- e.g. AT16/M16/SA/BLY TYPE SF45 - ADAPTALOK ATS NEW 45 ELBOW BODY - SWIVEL INTERNAL FEMALE THREAD For attachment to externa threads & other fittings. Order ocknuts separatey. Poyamide (Nyon) 66. Nicke pated brass thread/tpe Body Coour Back (BL) & Grey (GR). Yeow (Y) & Bue (B) Eastomer NOMINAL CONDUIT SIZE (mm) / M16 AT1/M16/CSF90 /8 AT1/08/CSF90 M16 AT16/M16/CSF90 /8 AT16/08/CSF90 M20 AT21/M20/CSF90 1 /2 AT21/050/CSF90 M25 AT28/M25/CSF90 /4 AT28/075/CSF90 M2 AT4/M2/CSF90 1 AT4/100/CSF90 M40 AT42/M40/CSF90 1 /4 AT42/125/CSF90 M50 AT48/M50/CSF90 1 /2 AT48/150/CSF90 M50 AT54/M50/CSF90 M6 AT54/M6/CSF90 2 AT54/200/CSF90 NPT THREAD M16 AT1/M16/SF45 /8 AT1/08/SF45 M16 AT16/M16/SF45 /8 AT16/08/SF45 M20 AT21/M20/SF45 1 /2 AT21/050/SF45 M25 AT28/M25/SF45 /4 AT28/075/SF45 M2 AT4/M2/SF45 1 AT4/100/SF45 M40 AT42/M40/SF45 1 /4 AT42/125/SF45 M50 AT48/M50/SF45 1 /2 AT48/150/SF45 M50 AT54/M50/SF45 M6 AT54/M6/SF45 2 AT54/200/SF45 NPT THREAD Add body & eastomer coour to part no. /BLY, /BLB, /GRY, or /GRB NOTE: Specia Big Bore & PF/GAS meta threads are avaiabe as made to order. Contact us for detais IP Rating with appropriate fitting IP67 IP69k For use with foowing conduit; PA. PI, CP, PR & PADL (4 bar 0 mins) For use with foowing conduit; PA. PI, CP, PR & PADL (4 bar 0 mins) Static Appications: -50 C to +120 C Moving Appications: -45 C to +120 C Static Appications: -50 C to +120 C Moving Appications: -45 C to +120 C Fitting Characteristics Approvas 0

31 Adaptaok ATS non-metaic system NEW UNEF CIRCULAR CONNECTOR FITTINGS (MIL C 5015) PRODUCT CHARACTERISTICS Materias Exampe TYPE SFA - ADAPTALOK ATS NEW STRAIGHT BODY - SWIVEL INTERNAL THREAD For couping to UNEF circuar connectors. Poyamide (Nyon) 66 & Auminium/TPE Body Coour Back (BL) ony. Yeow (Y) & Bue (B) Eastomer TYPE CSF90 - ADAPTALOK ATS NEW 90 ELBOW BODY - SWIVEL INTERNAL THREAD For couping to UNEF circuar connectors. Poyamide (Nyon) 66 & Auminium/TPE Body Coour Back (BL) ony. Yeow (Y) & Bue (B) Eastomer NOMINAL CONDUIT SIZE (mm) IP Rating with appropriate fitting CONNECTOR UNEF THREAD / / / / / / / / IP67 IP69k (4 bar 0 mins) AT1/U06/SFA/ AT1/U075/SFA/ AT1/U088/SFA/ AT16/U06/SFA/ AT16/U075/SFA/ AT16/U081/SFA/ AT16/U088/SFA/ AT16/U094/SFA/ AT16/U100/SFA/ AT16/U119/SFA/ AT16/U11/SFA/ AT21/U075/SFA/ AT21/U088/SFA/ AT21/U094/SFA/ AT21/U100/SFA/ AT21/U11/SFA/ AT21/U119/SFA/ AT21/U11/SFA/ AT21/U18/SFA/ For use with foowing conduit; PA. PI, CP, PR & PADL NOMINAL CONDUIT SIZE (mm) CONNECTOR UNEF THREAD 21/ / AT21/U144/SFA/ AT21/U175/SFA/ AT28/U088/SFA/ AT28/U094/SFA/ AT28/U100/SFA/ AT28/U119/SFA/ AT28/U18/SFA/ AT28/U144/SFA/ AT28/U175/SFA/ AT28/U200/SFA/ AT28/U225/SFA/ AT4/U100/SFA/ AT4/U119/SFA/ AT4/U144/SFA/ AT4/U175/SFA/ AT4/U200/SFA/ AT42/U175/SFA/ AT42/U200/SFA/ NOMINAL CONDUIT SIZE (mm) CONNECTOR UNEF THREAD / / / / / / / / For use with foowing conduit; PA. PI, CP, PR & PADL (4 bar 0 mins) AT1/U06/CSF90/ AT1/U075/CSF90/ AT1/U088/CSF90/ AT16/U06/CSF90/ AT16/U075/CSF90/ AT16/U081/CSF90/ AT16/U088/CSF90/ AT16/U094/CSF90/ AT16/U100/CSF90/ AT16/U119/CSF90/ AT16/U11/CSF90/ AT21/U075/CSF90/ AT21/U088/CSF90/ AT21/U094/CSF90/ AT21/U100/CSF90/ AT21/U11/CSF90/ AT21/U119/CSF90/ AT21/U11/CSF90/ AT21/U18/CSF90/ NOMINAL CONDUIT SIZE (mm) Add body & eastomer coour to part no. /BLY or /BLB CONNECTOR UNEF THREAD 21/ / AT21/U144/CSF90/ AT21/U175/CSF90/ AT28/U088/CSF90/ AT28/U094/CSF90/ AT28/U100/CSF90/ AT28/U119/CSF90/ AT28/U18/CSF90/ AT28/U144/CSF90/ AT28/U175/CSF90/ AT28/U200/CSF90/ AT28/U225/CSF90/ AT4/U100/CSF90/ AT4/U119/CSF90/ AT4/U144/CSF90/ AT4/U175/CSF90/ AT4/U200/CSF90/ AT42/U175/CSF90/ AT42/U200/CSF90/ Static Appications: -50 C to +120 C Moving Appications: -45 C to +120 C Static Appications: -50 C to +120 C Moving Appications: -45 C to +120 C Fitting Characteristics Approvas 1

32 Adaptaok ATS non-metaic system NEW UNEF CIRCULAR CONNECTOR FITTINGS (MIL C 5015) Materias Exampe PRODUCT CHARACTERISTICS TYPE SF45 - ADAPTALOK ATS NEW 45 ELBOW BODY - SWIVEL INTERNAL THREAD For couping to UNEF circuar connectors. Poyamide (Nyon) 66 & Auminium/TPE Body Coour Back (BL) ony. Yeow (Y) & Bue (B) Eastomer To order quote part no, body coour & eastomer coour- e.g. AT1/U06/A/BLY SWIVEL COUPLER NEW STRAIGHT PA66 BODY - SWIVEL COUPLER For couping to corrugated fexibe conduit. Poyamide (Nyon) 66/TPE Body Coour Back (BL) & Grey (GR). Yeow (Y) & Bue (B) Eastomer NOMINAL CONDUIT SIZE (mm) CONNECTOR UNEF THREAD / / / / / / / / AT1/U06/SF45/ AT1/U075/SF45/ AT1/U088/SF45/ AT16/U06/SF45/ AT16/U075/SF45/ AT16/U081/SF45/ AT16/U088/SF45/ AT16/U094/SF45/ AT16/U100/SF45/ AT16/U119/SF45/ AT16/U11/SF45/ AT21/U075/SF45/ AT21/U088/SF45/ AT21/U094/SF45/ AT21/U100/SF45/ AT21/U11/SF45/ AT21/U119/SF45/ AT21/U11/SF45/ AT21/U18/SF45/ NOMINAL CONDUIT SIZE (mm) CONNECTOR UNEF THREAD 21/ / AT21/U144/SF45/ AT21/U175/SF45/ AT28/U088/SF45/ AT28/U094/SF45/ AT28/U100/SF45/ AT28/U119/SF45/ AT28/U18/SF45/ AT28/U144/SF45/ AT28/U175/SF45/ AT28/U200/SF45/ AT28/U225/SF45/ AT4/U100/SF45/ AT4/U119/SF45/ AT4/U144/SF45/ AT4/U175/SF45/ AT4/U200/SF45/ AT42/U175/SF45/ AT42/U200/SF45/ Add body & eastomer coour to part no. /BLY or /BLB AT1/A/U AT16/A/U AT21/A/U AT28/A/U AT4/A/U AT42/A/U AT48/A/U AT54/A/U Add body & eastomer coour to part no. /BLY, /BLB, /GRY, or /GRB IP Rating with appropriate fitting IP67 IP69k For use with foowing conduit; PA. PI, CP, PR & PADL (4 bar 0 mins) For use with foowing conduit; PA. PI, CP, PR & PADL (4 bar 0 mins) Static Appications: -50 C to +120 C Moving Appications: -45 C to +120 C Static Appications: -50 C to +120 C Moving Appications: -45 C to +120 C Fitting Characteristics Approvas 2

33 PRODUCT CHARACTERISTICS TYPE FL/A - ADAPTALOK NEW STRAIGHT PANEL MOUNTING SWIVEL FLANGE with integra face sea. TYPE FL/C90 - ADAPTALOK NEW 90 ELBOW BODY - PANEL MOUNT FLANGE For pane mounting via 2 hoe fixing & integra face sea. TYPE FL/45 - ADAPTALOK NEW 45 PANEL MOUNTING SWIVEL FLANGE with integra face sea. Materias Poyamide (Nyon) 66/TPE Body Coour Back (BL) & Grey (GR). Yeow (Y) & Bue (B) Eastomer Poyamide (Nyon) 66/TPE Body Coour Back (BL) & Grey (GR). Yeow (Y) & Bue (B) Eastomer Poyamide (Nyon) 66/TPE Body Coour Back (BL) & Grey (GR). Yeow (Y) & Bue (B) Eastomer Exampe NOMINAL CONDUIT SIZE (mm) / AT21/FL/A AT28/FL/A AT54/FL/A AT1/FL/C90 AT16/FL/C90 AT21/FL/C90 AT28/FL/C AT16/FL/45 AT21/FL/45 AT28/FL/ AT54/FL/45 IP Rating with appropriate fitting IP67 IP69k For use with foowing conduit; PA. PI, CP, PR & PADL (4 bar 0 mins) Add body & eastomer coour to part no. /BLY, /BLB, /GRY, or /GRB For use with foowing conduit; PA. PI, CP, PR & PADL (4 bar 0 mins) For use with foowing conduit; PA. PI, CP, PR & PADL (4 bar 0 mins) Static Appications: -50 C to +120 C Moving Appications: -45 C to +120 C Static Appications: -50 C to +120 C Moving Appications: -45 C to +120 C Static Appications: -50 C to +120 C Moving Appications: -45 C to +120 C Fitting Characteristics Approvas

34 Adaptasea non-metaic system LIQUID TIGHT COMPRESSION FITTINGS & ACCESSORIES PRODUCT CHARACTERISTICS To order quote part no & coour - e.g. ASF10/M16/A/BL Materias TYPE A - ADAPTASEAL STRAIGHT FITTING - FIXED EXTERNAL THREAD For insertion into threaded entries & knockouts. Locknut suppied with ONLY Poyamide (Nyon) 66 Coour Back (BL) & Grey (GR). TYPE C90 - ADAPTASEAL 90 ELBOW FITTING - FIXED EXTERNAL THREAD For insertion into knockouts using a ocknut. Locknut suppied with ONLY Poyamide (Nyon) 66 Coour Back (BL) & Grey (GR). TYPE FLC90/FL90 - ADAPTASEAL 90 ELBOW FITTING - PANEL MOUNT FLANGE For pane mounting via 2/4 hoe fixing & integra face sea Poyamide (Nyon) 66 Coour Back (BL) ony. Exampe NOMINAL CONDUIT SIZE (mm) CONDUIT PITCH F = FINE C= COARSE PG THREAD PG THREAD 10 F 1 F 16 F 16 F 21 F 21 C 28 F 28 C 4 F 4 C 42 C 54 C M16 ASF10/M16/A PG9 ASF10/PG9/A M16 ASF1/M16/A PG9 ASF1/PG9/A M16 ASF16/M16/A PG11 ASF16/PG11/A M20 ASF16/M20/A PG1.5 ASF16/PG1/A M20 ASF21/M20/A PG16 ASF21/PG16/A M20 ASC21/M20/A PG16 ASC21/PG16/A M25 ASF28/M25/A PG21 ASF28/PG21/A M25 ASC28/M25/A PG21 ASC28/PG21/A M2 ASF4/M2/A PG29 ASF4/PG29/A M2 ASC4/M2/A PG29 ASC4/PG29/A M40 ASC42/M40/A PG6 ASC42/PG6/A M50 ASC54/M50/A PG48 ASC54/PG48/A M16 ASF10/M16/C90 PG9 ASF10/PG9/C90 M16 ASF1/M16/C90 PG9 ASF1/PG9/C90 M16 ASF16/M16/C90 PG11 ASF16/PG11/C90 M20 ASF16/M20/C90 PG1.5 ASF16/PG1/C90 M20 ASF21/M20/C90 PG16 ASF21/PG16/C90 M20 ASC21/M20/C90 PG16 ASC21/PG16/C90 M25 ASF28/M25/C90 PG21 ASF28/PG21/C90 M25 ASC28/M25/C90 PG21 ASC28/PG21/C90 M2 ASF4/M2/C90 PG29 ASF4/PG29/C90 M2 ASC4/M2/C90 PG29 ASC4/PG29/C90 M40 ASC42/M40/C90 PG6 ASC42/PG6/C90 M50 ASC54/M50/C90 PG48 ASC54/PG48/C90 ASF1/FL/C90 ASF16/FL/C90 ASF21/FL/C90 ASC21/FL/C90 ASF28/FL/C90 ASC28/FL/C90 ASF4/FL/90 ASC4/FL/90 ASC42/FL/90 ASC54/FL/90 Note. PF & NPT thread sizes avaiabe Note. PF & NPT thread sizes avaiabe IP Rating with appropriate fitting For use with foowing conduit; PA, PI, CP & PR For use with foowing conduit; PA, PI, CP & PR For use with foowing conduit; PA, PI, CP & PR IP40 IP65 PA, PI, CP & PR conduit PA, PI, CP & PR conduit PA, PI, CP & PR conduit IP67 PA, PI, CP & PR conduit PA, PI, CP & PR conduit PA, PI, CP & PR conduit PA, PI, CP & PR conduit - 2 bar 0 mins PA, PI, CP & PR conduit - 2 bar 0 mins PA, PI, CP & PR conduit - 2 bar 0 mins NEW IP69k PA, PI, CP & PR conduit PA, PI, CP & PR conduit PA, PI, CP & PR conduit Static Appications: -40 C to +120 C Moving Appications: -5 C to +120 C Static Appications: -40 C to +120 C Moving Appications: -5 C to +120 C Static Appications: -40 C to +120 C Moving Appications: -5 C to +120 C Fitting Characteristics Approvas 4

35 PRODUCT CHARACTERISTICS TYPE T - ADAPTASEAL INSPECTION T-PIECE For connection to corrugated fexibe conduit. TYPE RK - ADAPTASEAL REDUCING KIT For connection to a reduced conduit size TYPE AWB ANTI-VIBRATION WASHER Prevents fitting oosening under vibration. Materias Poyamide (Nyon) 66 Coour Back (BL) ony. Poyamide (Nyon) 66 & Neoprene Rubber Coour Back (BL)ony. Aceta (POM) Coour Back (BL) ony. Exampe FOR CONNECTION TO NOMINAL CONDUIT SIZE (mm) CONDUIT PITCH F = FINE C= COARSE REDUCING TO CONDUIT SIZE 10 REDUCING TO CONDUIT SIZE 1 REDUCING TO CONDUIT SIZE 16 REDUCING TO CONDUIT SIZE 21 REDUCING TO CONDUIT SIZE F F F F C F C F C 10 ASF10X/T 1 ASF1X/T 16 ASF16X/T 21 ASF21X/T 21 ASC21X/T 28 ASF28X/T 28 ASC28X/T 4 ASF4X/T 4 ASC4X/T RK1-10 RK16-10 RK16-1 RK21-10 RK21-1 RK21-16 RK21-10 RK21-1 RK21-16 RK28-1 RK28-16 RK28-21 RK28-1 RK28-16 RK28-21 RK4-21 RK4-28 RK4-21 RK4-28 AWB1 AWB1 AWB16 AWB21 AWB21 AWB28 AWB28 AWB4 AWB4 IP Rating with appropriate fitting IP40 IP65 IP67 NEW IP69k Fitting Characteristics For use with foowing conduit; PA, PI, CP & PR PA, PI, CP & PR conduit PA, PI, CP & PR conduit Static Appications: -40 C to +120 C Moving Appications: -5 C to +120 C For use with foowing conduit; PA, PI, CP & PR PA, PI, CP & PR conduit PA, PI, CP & PR conduit Static Appications: -40 C to +120 C Moving Appications: -5 C to +120 C Approvas 5

36 Adaptaring non-metaic system FREELY ROTATING SWIVEL COMPRESSION FITTINGS PRODUCT CHARACTERISTICS To order quote part no & coour - e.g. AR1/M16/A/BL Materias TYPE A - ADAPTARING STRAIGHT FITTING - FIXED EXTERNAL THREAD For insertion into threaded entries & knockouts. Locknut suppied with ONLY Poyamide (Nyon) 66 & Aceta (POM) Coour Back (BL) ony. TYPE C90 - ADAPTARING 90 ELBOW FITTING - FIXED EXTERNAL THREAD For insertion into knockouts. Locknut suppied with ONLY Poyamide (Nyon) 66 & Aceta (POM) Coour Back (BL) ony. TYPE T - ADAPTARING ROTATIONAL INSPECTION T-PIECE For connection to corrugated fexibe conduit. Poyamide (Nyon) 66 & Aceta (POM) Coour Back (BL) ony. TYPE AWB ANTI-VIBRATION WASHER Prevents fitting oosening under vibration. Aceta (POM) Coour Back (BL) ony. Exampe NOMINAL CONDUIT SIZE (mm) PG THREAD M16 AR1/M16/A PG9 AR1/PG9/A M16 AR16/M16/A PG11 AR16/PG11/A M20 AR16/M20/A PG1.5 AR16/PG1/A M20 AR21/M20/A PG16 AR21/PG16/A M25 AR28/M25/A PG21 AR28/PG21/A M2 AR4/M2/A PG29 AR4/PG29/A M42 AR42/M40/A PG6 AR42/PG6/A M50 AR54/M50/A PG48 AR54/PG48/A M1 M16 M20 M20 M25 M2 M40 M50 AR1/M16/C90 AR16/M16/C90 AR16/M20/C90 AR21/M20/C90 AR28/M25/C90 AR4/M2/C90 AR42/M40/C90 AR54/M50/C90 AR1X/T AR16X/T AR21X/T AR28X/T AR4X/T AWB1 AWB16 AWB21 AWB28 AWB4 Note. PF & NPT thread sizes avaiabe Note. PF & NPT thread sizes avaiabe IP Rating with appropriate fitting For use with foowing fittings; PA, PI, CP & PR For use with foowing fittings; PA, PI, CP & PR For use with foowing fittings; PA, PI, CP & PR IP40 PA, PI, CP & PR conduit PA, PI, CP & PR conduit PA, PI, CP & PR conduit IP65 IP67 NEW IP69k Static Appications: -40 C to +120 C Moving Appications: -5 C to +120 C Static Appications: -40 C to +120 C Moving Appications: -5 C to +120 C Static Appications: -40 C to +120 C Moving Appications: -5 C to +120 C Fitting Characteristics Approvas 6

37 Speciaist non-metaic systems TYPE KF NON-METALLIC CONDUIT & FITTINGS PRODUCT CHARACTERISTICS To order quote part no, coour & ree ength - e.g. KFL20/PP/R/100M TYPE KF - KORIFIT MEDIUM WEIGHT DRAW-WIRED CONDUIT TYPE KF - KORIFIT LIGHTWEIGHT CONDUIT TYPE KF - KORIFIT STANDARD WEIGHT CONDUIT TYPE KF - KORIFIT MEDIUM WEIGHT CONDUIT Materias Poyoefin, Nyon Draw-Wire Coour Back (BL) ony. PVCu Coour Grey (GR) ony. PVCu Coour White (W) ony. PVCu Coour Back (BL) ony. Exampe NOMINAL CONDUIT SIZE (mm) OUTSIDE DIAMETER (mm) NW CONDUIT SIZE (mm) CONDUIT PITCH F = FINE C= COARSE INSIDE DIAMETER (mm) MINIMUM BEND RADIUS (mm) REEL LENGTH (m) INSIDE DIAMETER (mm) MINIMUM BEND RADIUS (mm) REEL LENGTH (m) INSIDE DIAMETER (mm) MINIMUM BEND RADIUS (mm) REEL LENGTH (m) INSIDE DIAMETER (mm) MINIMUM BEND RADIUS (mm) REEL LENGTH (m) F F F F C C KFM16/PAD KFM20/PAD KFM25/PAD KFM2/PAD KFM40/PAD KFM50/PAD KFL KFL KFL KFS KFS KFS KFM KFM KFM IP Rating with appropriate fitting For use with foowing fittings; Korifit For use with foowing fittings; Korifit For use with foowing fittings; Korifit For use with foowing fittings; Korifit IP40 Korifit KC Fittings Korifit KC Fittings KC & KF Fittings KC & KF Fittings IP65 Korifit KF Fittings Korifit KF Fittings KC & KF Fittings KC & KF Fittings IP67 NEW IP69k Static Appications: -5 C to +90 C Moving Appications: -5 C to +90 C Static Appications: -5 C to +60 C Moving Appications: -5 C to +60 C Static Appications: -5 C to +60 C Moving Appications: -5 C to +60 C Static Appications: -5 C to +60 C Moving Appications: -5 C to +60 C UV Resistance Fexibiity & Fatigue Life Medium Fexibity - Low Fatigue Life Piabe - Low Fatigue Life Piabe - Low Fatigue Life Piabe - Low Fatigue Life Fire Performance & EMI Screen Sef Extinguishing Sef Extinguishing Approvas System Appications Genera Construction Light Duty Commercia & Industria Prefabricated Concrete Buidings Light Duty Commercia & Industria Prefabricated Concrete Buidings Retai/Offices Light Duty Commercia & Industria Prefabricated Concrete Buidings 7

38 Speciaist non-metaic systems TYPE KF & PP NON-METALLIC CONDUIT & FITTINGS PRODUCT CHARACTERISTICS To order quote part no, coour & ree ength - e.g. KFS16/W/50M Materias TYPE KC/A - KORIFIT STRAIGHT FITTING - FIXED EXTERNAL THREAD For insertion into threaded entries & knockouts. Locknut suppied. Poyamide (Nyon) Coour Back (BL), Grey (GR) & White (W). TYPE KC/C90 - KORIFIT 90 ELBOW FITTING - FIXED EXTERNAL THREAD For insertion into knockouts. Locknut suppied. Poyamide (Nyon) Coour Back (BL) ony. TYPE KF/A - KORIFIT STRAIGHT FITTING - FIXED EXTERNAL THREAD For insertion into threaded entries & knockouts. Locknut suppied. Poyamide (Nyon) Coour Back (BL) Grey (GR) & White (W). COUPLER - KORIFIT STRAIGHT ONE PIECE COUPLER For couping to corrugated fexibe conduit. Poyamide (Nyon) Coour White (W) ony. Exampe NOMINAL CONDUIT SIZE (mm) OUTSIDE DIAMETER (mm) NW CONDUIT SIZE (mm) M16 M20 M20 M25 M2 M40 M50 KC16/M16/A KC16/M20/A KC20/M20/A KC25/M25/A KC2/M2/A KC40/M40/A KC50/M50/A M16 KC16/M16/C90/BL M20 KC20/M20/C90/BL M25 KC25/M25/C90/BL M2 KC2/M2/C90/BL M16 KF16/M16/A/ M20 KF16/M20/A/ M20 KF20/M20/A/ M25 KF25/M25/A/ KF2020/ IP Rating with appropriate fitting For use with foowing conduit; KORIFIT KF For use with foowing conduit; KORIFIT KF For use with foowing conduit; KORIFIT KF For use with foowing conduit; KORIFIT KF IP40 KF conduit KF conduit IP65 KF conduit KF conduit IP67 NEW IP69k Static Appications: -5 C to +60 C Moving Appications: -5 C to +60 C Static Appications: -5 C to +60 C Moving Appications: -5 C to +60 C Static Appications: -5 C to +60 C Moving Appications: -5 C to +60 C Static Appications: -5 C to +60 C Moving Appications: -5 C to +60 C UV Resistance Fexibiity & Fatigue Life Fitting Characteristics Approvas System Appications 8

39 PRODUCT CHARACTERISTICS To order quote part no & coour - e.g. KF16/M16/A/W Materias TYPE PP MEDIUM WEIGHT CONDUIT Poypropyene Coour Back (BL) ony. TYPE PPA - ADAPTALOK STRAIGHT FITTING - FIXED EXTERNAL THREAD For insertion into threaded entries & knockouts. Locknut suppied. Poypropyene Coour Back (BL)ony. Exampe NOMINAL CONDUIT SIZE (mm) OUTSIDE DIAMETER (mm) NW CONDUIT SIZE (mm) INSIDE DIAMETER (mm) MINIMUM BEND RADIUS (mm) REEL LENGTH (m) PPFM PPFM PPFM PPFM PPFM M16 M16 M20 M25 M2 AL1/M16/PPA AL16/M16/PPA AL21/M20/PPA AL28/M25/PPA AL4/M2/PPA IP Rating with appropriate fitting IP40 IP65 IP67 NEW IP69k For use with foowing fittings; Adaptaok PPA Adaptaok PPA Fitting For use with foowing conduit; PP PP conduit UV Resistance Fexibiity & Fatigue Life Fitting Characteristics Static Appications: -20 C to +90 C Moving Appications: -5 C to +105 C Medium Fexibity - Medium Fatigue Life Static Appications: -20 C to +90 C Moving Appications: -5 C to +105 C Approvas System Appications Acid Resisting Environments 9

40 Speciaist non-metaic systems TYPE XF & RF NON-METALLIC CONDUIT & FITTINGS PRODUCT CHARACTERISTICS To order quote part no, coour & ree ength - e.g. RF12/BL/0M Materias TYPE XF - XTRAFLEX STANDARD WEIGHT CONDUIT PVCu spira with pasticised PVC covering Coour Back (BL) ony. TYPE RF - XTRAFLEX STANDARD WEIGHT CONDUIT PVCu spira with pasticised PVC covering Coour Back (BL) & Grey (GR). TYPE A - XTRAFLEX STRAIGHT FITTING - FIXED EXTERNAL THREAD For insertion into threaded entries & knockouts. Suppied with Locknuts - ONLY. Poyamide (Nyon) 66 Coour Back (BL). TYPE C90 - XTRAFLEX 90 ELBOW FITTING - FIXED EXTERNAL THREAD For insertion into knockouts. Suppied with Locknuts - ONLY. Poyamide (Nyon) 66 Coour Back (BL). Exampe NOMINAL CONDUIT SIZE (mm) OUTSIDE DIAMETER (mm) INSIDE DIAMETER (mm) MINIMUM BEND RADIUS (mm) REEL LENGTH (m) OUTSIDE DIAMETER (mm) INSIDE DIAMETER (mm) MINIMUM BEND RADIUS (mm) REEL LENGTH (m) XF XF XF XF XF XF XF RF RF , RF , 0 RF , 0 RF , 0 RF , 0 RF , 0 M16 M16 M20 M20 M25 M2 M40 M50 XF12/M16/D XF16/M16/D XF16/M20/D XF20/M20/D XF25/M25/D XF2/M2/D XF40/M40/D XF50/M50/D M16 M16 XF16/M16/C90 M20 M20 XF20/M20/C90 M25 XF25/M25/C90 M2 XF2/M2/C90 M40 M50 Note. PG, PF & NPT thread sizes avaiabe Note. PG, PF & NPT thread sizes avaiabe IP Rating with appropriate fitting For use with foowing fittings; Xtrafex For use with foowing fittings; Xtrafex For use with foowing fittings; XTRAFLEX XF & RF For use with foowing conduit; XTRAFLEX XF & RF IP40 IP65 Xtrafex Fittings XF conduit XF conduit IP67 Xtrafex Fittings RF conduit RF conduit NEW IP69k Static Appications: -5 C to +60 C Moving Appications: -5 C to +60 C Static Appications: -20 C to +60 C Moving Appications: -5 C to +60 C Static Appications: -5 C to +60 C Moving Appications: -5 C to +60 C Static Appications: -5 C to +60 C Moving Appications: -5 C to +60 C UV Resistance Fexibiity & Fatigue Life Very Fexibiity - Medium Fatigue Life Medium Fexibiity - Medium Fatigue Life Fitting Characteristics Fire Performance & EMI Screen Sef Extinguishing Sef Extinguishing Approvas System Appications Torsiona Equipment Direct Buria in Concrete 40

41 Non-metaic accessories LOCKNUTS, CONDUIT CLIPS, THREAD CONVERTORS, END CAPS, SEALING WASHERS, END SLEEVES & REMOVAL TOOL PRODUCT CHARACTERISTICS Materias Exampe TYPE LNP NYLON LOCKNUTS Poyamide (Nyon) 6 Coour Back (BL) & Grey (GR). TYPE SW THREAD SEALING WASHER - CAPTIVE Rubber - For use with Nyon threaded fittings Coour Back (BL), Yeow (Y) & Bue (B). Nyon - For use with swive meta threaded fittings Coour Back (BL), Yeow (Y) & Bue (B). TYPE AC CONDUIT CLIPS with integra id. Poyamide (Nyon) 66 Impact Modified Nyon - ony ST version NEW Coour Back (BL) & Grey (GR). BLACK GREY PG THREAD BLCK GREY TO FIT THREAD (METRIC) TO FIT THREAD (NPT & PF) (BLACK ONLY) NOMINAL CONDUIT SIZE (mm) BLACK GREY BLACK M12 LNPB/M12 M16 LNPB/M16 LNPG/M16 M20 LNPB/M20 LNPG/M20 M25 LNPB/M25 LNPG/M25 M2 LNPB/M2 LNPG/M2 M40 LNPB/M40 LNPG/M40 M50 LNPB/M50 LNPG/M50 M6 LNPB/M6 LNPG/M6 For metaic ocknuts pease refer to page PG7 PG9 PG11 PG1 PG16 PG21 PG29 PG6 PG42 PG48 LNPB/PG7 LNPB/PG9 LNPB/PG11 LNPB/PG1 LNPB/PG16 LNPB/PG21 LNPB/PG29 LNPB/PG6 LNPB/PG42 LNPB/PG48 LNPG/PG7 LNPG/PG9 LNPG/PG11 LNPG/PG1 LNPG/PG16 LNPG/PG21 LNPG/PG29 LNPG/PG6 LNPG/PG42 LNPG/PG48 M12 M16 M20 M25 M2 M40 M50 M6 SWM12 SWM16 SWM20 SWM25 SWM2 SWM40 SWM50 SWM6 8 SW SW050 4 SW075 1 SW SW SW150 2 SW200 To order add suffix to part no. i.e. Rubber Yeow - SWM12Y i.e. Nyon Bue - SWM20NB 10 ACB10 ACG10 1 ACB1 ACG1 ACB1/ST 16 ACB16 ACG16 ACB16/ST 21 ACB21 ACG21 ACB21/ST 28 ACB28 ACG28 ACB28/ST 4 ACB4 ACG4 ACB4/ST 42 ACB42 ACG42 ACB42/ST 48 ACB48 ACG48 ACB48/ST 54 ACB54 ACG54 ACB54/ST Materias TYPE TC/R NYLON THREAD CONVERTORS/REDUCERS First thread in Part No. is aways the mae. Poyamide (Nyon) 6 Coour Back (BL) ony. TYPE GZ END SLEEVES For seaing cabes to non-metaic conduit Rubber Coour Back (BL) ony. TYPE EC END CAPS Provide a smooth finish to prevent any damage to cabe when not terminated with a fitting. Aceta (POM) Coour Back (BL) ony. TYPE RT ADAPTALOK REMOVAL TOOL To Provide easy remova of Adaptaok Fittings Poyamide (Nyon) 6 Coour Back (BL) ony. Exampe EXTERNAL THREAD M16 INTERNAL THREAD M20 INTERNAL THREAD M25 INTERNAL THREAD M20 P/M20-M16/R M25 PG9 P/PG9-M16/TC PG11 P/PG11-M16/TC PG1 P/PG1-M16/TC PG16 P/PG16-M16/TC PG21 P/PG21-M25/TC A range of Brass thread converters are aso avaiabe on request NOMINAL CONDUIT SIZE (mm) 1 GZ9 16 GZ11 21 GZ1 28 GZ21 4 GZ29 42 GZ6 PART NUMBER NOMINAL CONDUIT SIZE (mm) 1 ECB1 16 ECB16 21 ECB21 28 ECB28 4 ECB4 42 ECB42 48 ECB48 54 ECB54 ADAPTALOK FITTING SIZE (mm) PART NUMBER 1 AL1RT 16 AL16RT 21 AL21RT 28 AL28RT 4 AL4RT 42 AL42RT 48 AL48RT 54 AL54RT 41

42 Non-metaic accessories NEW FASTLOK ADAPTERS & MANIFOLD BOXES - TYPE FK & TYPE MB To order quote part no & coour - e.g. FK20/BL To order quote part no, box & eastomer coours - e.g. MB21/BLY PRODUCT CHARACTERISTICS PRODUCT CHARACTERISTICS Materias Exampe TYPE FK - FASTLOK ADAPTER NEW STRAIGHT FITTING Quick fit, front of pane mounting adapter, into which can be screwed any metric threaded product. Poyamide (Nyon) 66 Coour Back (BL) & Grey (GR). Materias Exampe TYPE MB - MANIFOLD BOXES NEW MULTIWAY ADAPTERS - Non metaic encosure which can be machined to take upto eight Adaptaok ATS fittings (or other devices) in a variety of configurations and sizes. Eg. Y, T, X, V etc. Each box has a removabe cover for ease of access. The box sea is mouded, so remains captive for case of instaation. Poyamide (Nyon) 66 / TPE Box Coour Back (BL) & Grey (GR). Eastomer Coour Yeow (Y), Bue (B) HOLE DIAMETER FOR FASTLOK (mm) TO SUIT TO SUIT - WITHOUT SEALS M20 FK20/ FK20/BL M25 FK25/ FK25/BL M40 FK40/ FK40/BL 1 BOX TYPE 2 EXTERNAL DIMENSIONS -LID (MM) DIA X HEIGHT EXTERNAL DIMENSIONS FIXING LUGS (MM) MAX THREADED ENTRY PER FACE 100 x M20 MB21/ 16 x M2 MB4/ 200 x M54 MB54/ Fastok adapters use seas to provide an ingress protection eve of, 67, 68 and 69k. They are a superior aternative to Push-in type fittings, they provide better protection and are simper to insta and remove. Fastok provides minimum intrusion into the encosure space Each manifod is provided with eight bank sides which require driing/machining to suit the appication. Manifods can be suppied ready dried to order subject to minimum order quantities. Threaded fittings with ocknuts of Fastok adapters can be used in each entry. Pane Thickness Can be instaed into.5mm Pane (max) IP Rating with appropriate fitting For use with a threaded Adaptaok ATS fittings IP Rating with appropriate fitting For use with a conduits in this cataogue IP67 IP67 (4 bar 0 mins) (2 bar 0 mins) IP69k IP69k Static Appications: -50 C to +120 C Moving Appications: -45 C to +120 C Static Appications: -50 C to +120 C Moving Appications: -45 C to +120 C Fitting Characteristics Fire Performance Approvas Pending Approvas Pending UV Resistance Very 42

43 Non-metaic accessories NEW FASTLOK ADAPTERS & MANIFOLD BOXES ASSEMBLY & CONFIGURATIONS FASTLOK ASSEMBLY 1. Dri hoe into encosure 2. Insert Fastok into the hoe. Tighten eft -hand thread to secure to encosure 4. Screw fitting into Fastok MANIFOLD BOXES - EXAMPLE CONFIGURATIONS Expoded view of Fastok, Encosure & Fitting Assemby Fastok fits quicky and is secured easiy without the need for any additiona toos Minimum intrusion into encosure 4

44 Non-metaic accessories HINGED T & Y PIECES PRODUCT CHARACTERISTICS EXTERNAL T PIECE DIMENSIONS TYPE T HINGED T PIECE A Materias Poyamide (Nyon) 66 Coour Back (BL) ony. C E B Exampe D PART NUMBER NOMINAL DIMENSIONS mm NOMINAL DIMENSIONS (mm) NOMINAL CONDUIT SIZE NOMINAL CONDUIT SIZE NOMINAL CONDUIT SIZE NOMINAL WEIGHT (g) PART NUMBER NOMINAL DIMENSIONS mm NOMINAL DIMENSIONS (mm) NOMINAL CONDUIT SIZE NOMINAL CONDUIT SIZE NOMINAL CONDUIT SIZE NOMINAL WEIGHT (g) IP Rating with appropriate fitting IP40 IP65 IP67 NEW IP69k Fitting Characteristics 44 Approvas A B C D E (gms) T101010/BL g T10110/BL g T10161/BL g T111111/BL g T11111/BL g T11010/BL g T1101/BL g T11111/BL g T1111/BL g T1110/BL g T1111/BL g T111/BL g T1161/BL g T16101/BL g T16111/BL g T161116/BL g T1611/BL g T16116/BL g T16161/BL g T161616/BL g T16211/BL g T162116/BL g T211016/BL g T211021/BL g T211116/BL g T211121/BL g T21116/BL g For use with foowing conduit; PA, PI, & PR PA, PI, & PR conduit Static Appications: -40 C to +120 C Moving Appications: -5 C to +120 C Snap Fit A B C D E (gms) T21121/BL g T21161/BL g T211616/BL g T211621/BL g T21211/BL g T212116/BL g T212121/BL g T251025/BL g T251125/BL g T25121/BL g T25125/BL g T251821/BL g T251825/BL g T252121/BL g T252125/BL g T252521/BL g T252525/BL g T281021/BL g T281028/BL g T281121/BL g T281128/BL g T28121/BL g T28125/BL g T28128/BL g T281621/BL g T281625/BL g T281628/BL g T282121/BL g T282125/BL g T282128/BL g T282525/BL g T282528/BL g T282828/BL g T41625/BL g T4164/BL g T42125/BL g T42128/BL g T4214/BL g T42525/BL g T4254/BL g T444/BL g

45 PRODUCT CHARACTERISTICS EXTERNAL Y PIECE DIMENSIONS TYPE Y HINGED Y PIECE A Materias Poyamide (Nyon) 66 Coour Back (BL) ony. C D Exampe B E IP Rating with appropriate fitting IP40 IP65 IP67 NEW IP69k Fitting Characteristics Approvas PART NUMBER A B C D E (gms) Y101010/BL g Y10101/BL g Y101210/BL g Y111111/BL g Y11010/BL g Y11011/BL g Y11111/BL g Y1110/BL g Y1111/BL g Y111/BL g Y16101/BL g Y161111/BL g Y16110/BL g Y16111/BL g Y1611/BL g Y161610/BL g Y161611/BL g Y16161/BL g Y211010/BL g Y21110/BL g Y21111/BL g Y2111/BL g Y211610/BL g Y21161/BL g Y211616/BL g For use with foowing conduit; PA, PI, & PR PA, PI, & PR conduit Static Appications: -40 C to +120 C Moving Appications: -5 C to +120 C Snap Fit NOMINAL DIMENSIONS (mm) NOMINAL DIMENSIONS (mm) NOMINAL CONDUIT SIZE NOMINAL CONDUIT SIZE NOMINAL CONDUIT SIZE NOMINAL WEIGHT (g) PART NUMBER NOMINAL DIMENSIONS (mm) NOMINAL DIMENSIONS (mm) NOMINAL CONDUIT SIZE NOMINAL CONDUIT SIZE NOMINAL CONDUIT SIZE NOMINAL WEIGHT (g) A B C D E (gms) Y212110/BL g Y212111/BL g Y21211/BL g Y212116/BL g Y25211/BL g Y252116/BL g Y252121/BL g Y252510/BL g Y252511/BL g Y25251/BL g Y252516/BL g Y252521/BL g Y252525/BL g Y28211/BL g Y282116/BL g Y282121/BL g Y28251/BL g Y282516/BL g Y282521/BL g Y282525/BL g Y282810/BL g Y28281/BL g Y282816/BL g Y282821/BL g Y282825/BL g Y282828/BL g Y42516/BL g Y42521/BL g Y42525/BL g Y4254/BL g Y4416/BL g Y4421/BL g Y4425/BL g Y444/BL g 45

46 Hi-Spec non-metaic fexibe systems TYPE PK, PKTC, PKSS, PRTC & PRSS SPECIALIST LOW FIRE HAZARD, EMI SCREEN CONDUIT & FITTINGS PRODUCT CHARACTERISTICS To order quote part no, coour & ree ength - e.g. PKFS1/BL/25M TYPE PK - PEEK UNBRAIDED CONDUIT TYPE A - PEEK STRAIGHT FITTING - FIXED EXTERNAL THREAD For insertion into knockouts using a ocknut. TYPE PKTC SUPER LOW FIRE HAZARD OVERBRAIDED TYPE PKSS SUPER LOW FIRE HAZARD OVERBRAIDED Materias Poyketone Coour Back (BL) ony. Nicke pated brass Poyketone Conduit/Tinned Copper overbraid Poyketone Conduit/Stainess Stee overbraid Exampe NOMINAL CONDUIT SIZE (mm) OUTSIDE DIAMETER (mm) NW CONDUIT SIZE (mm) CONDUIT PITCH F = FINE C= COARSE INSIDE DIAMETER (mm) MINIMUM BEND RADIUS (mm) REEL LENGTH (m) NOMINAL CONDUIT SIZE (mm) OUTSIDE DIAMETER (mm) NW CONDUIT SIZE (mm) CONDUIT PITCH F = FINE C= COARSE TYPE PKTC INSIDE DIAMETER (mm) MINIMUM BEND RADIUS (mm) REEL LENGTH (m) TYPE PKSS INSIDE DIAMETER (mm) MINIMUM BEND RADIUS (mm) REEL LENGTH (m) F F F C C PKFS , 50 PKFS , 50 PKFS , 50 PKCS , 50 PKCS , 50 M16 M16 M20 M25 M2 PK1/M16/A PK16/M16/A PK21/M20/A PK28/M25/A PK4/M2/A F F F C C PKFSTC , 50 PKFSTC , 50 PKFSTC , 50 PKCSTC , 50 PKCSTC , 50 PKFSSS , 50 PKFSSS , 50 PKFSSS , 50 PKCSSS , 50 PKCSSS , 50 IP Rating with appropriate fitting For use with foowing fittings; PK For use with foowing conduit; PEEK PK For use with foowing fittings; HI-SPEC A & B For use with foowing fittings; HI-SPEC A & B IP40 IP65 PK Fitting PK conduit HI-SPEC A & B Fitting HI-SPEC A & B Fitting IP67 PK Fitting PK conduit HI-SPEC A & B Fitting HI-SPEC A & B Fitting NEW IP69k Static Appications: -60 C to +260 C Moving Appications: -45 C to +260 C Static Appications: -60 C to +260 C Moving Appications: -45 C to +260 C Static Appications: -60 C to +260 C Moving Appications: -45 C to +260 C Static Appications: -60 C to +260 C Moving Appications: -45 C to +260 C UV Resistance Very Very Very Fexibiity & Fatigue Life Fexibity - Fatigue Life Fexibity - Fatigue Life Fexibity - Fatigue Life Fire Performance & EMI Screen Approvas System Appications 46 Raiways Underground Pubic Buidings Safety Critica Environment Nucear Pant Harsh Environments Petrochemica Offshore

47 PRODUCT CHARACTERISTICS TYPE PRTC ENHANCED LOW FIRE HAZARD OVERBRAIDED TYPE PRSS ENHANCED LOW FIRE HAZARD OVERBRAIDED TYPE A - HI-SPEC STRAIGHT FITTING - FIXED EXTERNAL THREAD For insertion into threaded entries & knockouts. TYPE B - HI-SPEC STRAIGHT FITTING - SWIVEL EXTERNAL THREAD For insertion into threaded entries & knockouts. Materias PA (Nyon) 6 Conduit/Tinned Copper overbraid PA (Nyon) 6 Conduit/Tinned Stainess Stee overbraid Nicke pated brass Nicke pated brass Exampe NOMINAL CONDUIT SIZE (mm) OUTSIDE DIAMETER (mm) NW CONDUIT SIZE (mm) CONDUIT PITCH F = FINE C= COARSE TYPE PRTC INSIDE DIAMETER (mm) MINIMUM BEND RADIUS (mm) REEL LENGTH (m) TYPE PRSS INSIDE DIAMETER (mm) MINIMUM BEND RADIUS (mm) REEL LENGTH (m) PG THREAD F F C C C C PRFSTC PRFSTC PRCSTC PRCSTC PRCSTC PRCSTC PRFSSS PRFSSS PRCSSS PRCSSS PRCSSS PRCSSS M16 PBF16/M16/A M20 PBF21/M20/A M25 PBC28/M25/A M2 PBC4/M2/A M40 PBC42/M40/A M16 PBF16/M16/B PG11 PBF16/PG11/B M20 PBF21/M20/B PG16 PBF21/PG16/B M25 PBC28/M25/B PG21 PBC28/PG21/B M2 PBC4/M2/B PG29 PBC4/PG29/B M40 PBC42/M40/B PG6 PBC42/PG6/B M50 PBC54/M50/B PG48 PBC54/PG48/B IP Rating with appropriate fitting For use with foowing fittings; HI-SPEC A & B For use with foowing fittings; HI-SPEC A & B For use with foowing conduit; PKTC, PKSS, PRTC & PRSS For use with foowing conduit; PKTC, PKSS, PRTC & PRSS IP40 IP65 HI-SPEC A & B Fittings HI-SPEC A & B Fittings PKTC, PKSS, PRTC & PRSS conduit PKTC, PKSS, PRTC & PRSS conduit IP67 HI-SPEC A & B Fittings HI-SPEC A & B Fittings PKTC, PKSS, PRTC & PRSS conduit PKTC, PKSS, PRTC & PRSS conduit NEW IP69k Static Appications: -40 C to +120 C Moving Appications: -5 C to +120 C Static Appications: -40 C to +120 C Moving Appications: -5 C to +120 C Static Appications: -60 C to +260 C Moving Appications: -45 C to +260 C Static Appications: -60 C to +260 C Moving Appications: -45 C to +260 C UV Resistance Very Very Fexibiity & Fatigue Life Fexibity - Medium Fatigue Life Fexibity - Medium Fatigue Life Fire Performance & EMI Screen Approvas System Appications Rai Systems Safety Critica Environments Rai Systems Harsh Environments 47

48 Metaic systems Quick Seection Guide Quick Seection Guide - Metaic systems TYPE S STEEL CONDUIT TYPE SS STAINLESS STEEL CONDUIT TYPE SP LIQUID RESISTANT CONDUIT TYPE SN LIQUID RESISTANT NYLON CONDUIT TYPE LFH-SP LOW FIRE HAZARD CONDUIT TYPE SPL LIQUID TIGHT CONDUIT TYPE SPLHC EXTREME TEMPERATURE CONDUIT TYPE SPUL CSA APPROVED/UL LISTED CONDUIT TYPE SB STEEL BRAIDED CONDUIT TYPE STC STEEL TINNED COPPER BRAIDED CONDUIT TYPE SSB NEW STAINLESS STEEL BRAIDED CONDUIT TYPE SSBGS NEW STAINLESS STELL BRAIDED STEEL CONDUIT TYPE SPB LIQUID RESISTANT BRAIDED CONDUIT TYPE SPTC LIQUID RESISTANT TINNED COPPER BRAIDED CONDUIT TYPE SPLHCB LIQUID TIGHT EXTREME TEMPERATURE CONDUIT Exampe Conduit Materia Covering/Overbraid IP RATING - (with appropriate fitting) IP40 IP54 IP65 IP67 IP69k Gavanised Stainess Gavanised Gavanised Gavanised Gavanised Gavanised Gavanised Gavanised Gavanised Stainess Gavanised Gavanised Gavanised Gavanised Stee Stee Stee Stee Stee Stee Stee Stee Stee Stee Stee Stee Stee Stee Stee PVC PA (Nyon) Poyoefin PVC Thermopastic Rubber PVC Gavanised Stee Tinned Copper Stainess Stee Stainess Stee PVC & Stainess Stee PVC & Tinned Copper Rubber & Stainess Stee Static Temp - Min Max -50 C +00 C -50 C +50 C -15 C +70 C -40 C +120 C -25 C +90 C -20 C +105 C -65 C +15 C -15 C +75 C -50 C +00 C -50 C +00 C -50 C +00 C -50 C +00 C -15 C +70 C -15 C +70 C -65 C +15 C UV Resistance Very Very Very Very Very Very Very Very Very Very Very Very Fexibiity Medium Medium Very Medium Very Fatigue Life Medium Medium Medium Medium Medium Medium Medium Low Fire Hazard Inherent Inherent Enhanced Inherent Inherent Inherent Inherent Haogen Free Sef Extinguishing EMI Screen Mechanica Strength Abrasion Resistance Approvas Enhanced Standard Standard Enhanced Standard 48 Key Appication Page Number KEY: Commercia Contracting Machine Toos Rai Marine Automation

49 Metaic Systems Conduit, Fittings & Accessories Range Overview Adaptafex have a choice of fifteen individua metaic conduit systems manufactured either in gavanized stee or stainess stee. A range of different conduit types provide a soution for iquid resistant specifications with a further conduit options in iquid tight covered stee conduit for especiay demanding environments. Conduit ranges are offered in nomina conduit size from mm for CCTV/roer shutter doors and for protecting fibre optics cabes right up to 75mm for arger cabe carrying capacity. Overbraided conduits are particuary suitabe for instaation in abrasive environments. Where appications ca for enhanced ow fire hazard properties or EMI screening then there is the option of high specification tinned copper overbraided for greater EMI protection eves. System approvas avaiabe: In addition a range of fittings are specificay designed to maintain system integrity incuding fixed and swive fittings, straights, 90, 45, and a host of accessories incuding ocknuts, enargers, reducers and converters. Many of our conduit systems have industry recognised approvas incuding British Kitemark, CE Approva, UL Listing, NF, LUL, DB, and Loyds Register amongst others. Advantages n compression/crush strength n Tensie strength - pu off oad under tension n Impact resistance n Inherent fire protection on uncoated versions n Corrosion resistant - stainess stee options n Braided - eve EMI screening with tinned copper overbraided n Greater temperature toerances Ranges incude: 49

50 Adaptastee metaic systems TYPE S & SS FLEXIBLE STEEL CONDUIT & TYPE S FITTINGS PRODUCT CHARACTERISTICS To order quote part no & ree ength - e.g. S10/25M Materias TYPE S INHERENT LOW FIRE HAZARD STEEL CONDUIT Gavanised Stee - Genera Purpose TYPE SS INHERENT LOW FIRE HAZARD STEEL CONDUIT Stainess Stee - Corrosion Resistant TYPE A STRAIGHT FITTING - FIXED EXTERNAL THREAD For insertion into knockouts using a ocknut. Nicke pated brass Exampe NOMINAL CONDUIT SIZE (mm) OUTSIDE DIAMETER (mm) TYPE S INSIDE DIAMETER (mm) MINIMUM BEND RADIUS (mm) REEL LENGTH (m) TYPE S ONLY TYPE S INSIDE DIAMETER (mm) MINIMUM BEND RADIUS (mm) REEL LENGTH (m) TYPE S ONLY PG THREAD S , 50 S , 25, 50 S , 25, 50 S , 25, 50 S , 25, 50 S , 25, 50 S , 25 S , 25 S , 25 S S SS SS SS SS , 50 SS , 50 SS , 25, 50 SS , 25, 50 SS , 25, 50 SS , 25, 50 SS , 25 M12 S10/M12/A PG7 S10/PG7/A M16 S12/M16/A PG9 S12/PG9/A M16 S16/M16/A PG11 S16/PG11/A M20 S16/M20/A PG11 S16/PG11/A M20 S20/M20/A PG16 S20/PG16/A M25 S25/M25/A PG21 S25/PG21/A M2 S2/M2/A PG29 S2/PG29/A M40 S40/M40/A PG6 S40/PG6/A M50 S50/M50/A PG42 S50/PG42/A M6 S6/M6/A PG48 S6/PG48/A M75 S75/M75/A IP Rating with appropriate fitting For use with foowing fittings; S Fittings For use with foowing fittings; S Fittings For use with foowing conduit; S & SS IP40 S Fittings - A, B, F & C S Fittings - A, B, F & C S & SS Conduit IP65 IP67 NEW IP69k Static Appications: -50 C to +00 C Moving Appications: -45 C to +250 C Static Appications: -50 C to +50 C Moving Appications: -45 C to +250 C Static Appications: -50 C to +00 C Moving Appications: -45 C to +250 C UV Resistance Very Very Fexibiity & Fatigue Life Fexibity - Fatigue Life Fexibity - Fatigue Life Fire Performance & EMI Screen Approvas System Appications 50 Lighting/Cabe Track Underfoor Wiring Light Industria Food Industry Raiway Corrosive Environments

51 PRODUCT CHARACTERISTICS Materias TYPE B STRAIGHT FITTING - SWIVEL EXTERNAL THREAD For insertion into threaded entries & knockouts. Nicke pated brass TYPE F STRAIGHT FITTING - FIXED INTERNAL THREAD For attachment to externa threads & other fittings. Nicke pated brass TYPE C SMOOTH ENTRY BUSH For ocking conduit into pain hoes in encosures. Nicke pated brass Exampe NOMINAL CONDUIT SIZE (mm) OUTSIDE DIAMETER (mm) PG THREAD HOLE SIZE (mm) M12 S10/M12/B PG7 S10/PG7/B M16 S12/M16/B PG9 S12/PG9/B M16 S16/M16/B PG11 S16/PG11/B M20 S16/M20/B PG11 S16/PG11/B M20 S20/M20/B PG16 S20/PG16/B M25 S25/M25/B PG21 S25/PG21/B M2 S2/M2/B PG29 S2/PG29/B M40 S40/M40/B PG6 S40/PG6/B M50 S50/M50/B PG42 S50/PG42/B M20 S20/M20/F M25 S25/M25/F M2 S2/M2/F 9 S10/9/C 12 S12/12/C 16 S16/16/C 16 S16/16/C 20 S20/20/C 25 S25/25/C 2 S2/2/C 40 S40/40/C 51 S50/51/C 61 S6/61/C 75 S75/75/C IP Rating with appropriate fitting For use with foowing conduit; S & SS For use with foowing conduit; S & SS For use with foowing conduit; S & SS IP40 S & SS Conduit S & SS Conduit S & SS Conduit IP65 IP67 NEW IP69k Static Appications: -50 C to +00 C Moving Appications: -45 C to +250 C Static Appications: -50 C to +00 C Moving Appications: -45 C to +250 C Static Appications: -50 C to +00 C Moving Appications: -45 C to +250 C Fitting Characteristics Approvas 51

52 Adaptastee Liquid Resistant metaic systems TYPE SP, SN & LFH-SP COVERED STEEL FLEXIBLE CONDUIT & TYPE SP FITTINGS PRODUCT CHARACTERISTICS To order quote part no, coour & ree ength - e.g. SP10/BL/25M Materias TYPE SP LIQUID RESISTANT GENERAL PURPOSE COVERED STEEL FLEXIBLE CONDUIT PVC Covered Gavanised Stee Coour Back (BL), Grey (GR) & Orange (OR) TYPE SN LIQUID RESISTANT ABRASION & SOLVENT RESISTANT COVERED STEEL FLEXIBLE CONDUIT PA (Nyon) Covered Gavanised Stee Coour Back (BL) ony. TYPE LFH-SP LIQUID RESISTANT ENHANCED LOW FIRE HAZARD COVERED STEEL FLEXIBLE CONDUIT Poyoefin Covered Gavanised Stee Coour Back (BL) ony. Exampe NOMINAL CONDUIT SIZE (mm) OUTSIDE DIAMETER (mm) INSIDE DIAMETER (mm) MINIMUM BEND RADIUS (mm) REEL LENGTH (m) TYPE S ONLY INSIDE DIAMETER (mm) MINIMUM BEND RADIUS (mm) REEL LENGTH (m) TYPE S ONLY INSIDE DIAMETER (mm) MINIMUM BEND RADIUS (mm) REEL LENGTH (m) TYPE S ONLY SP , 50 SP , 50 SP , 25, 50 S , 25, 50 SP , 25, 50 SP , 25 SP , 25 SP , 25 S SP SN , 50 SN , 50 SN , 50 SN , 50 SN LFH-SP , 50 LFH-SP , 25, 50 LFH-S , 25, 50 LFH-SP , 25, 50 LFH-SP , 25 LFH-SP , 25 LFH-SP , 25 LFH-S LFH-SP IP Rating with appropriate fitting For use with foowing fittings; SP Fittings For use with foowing fittings; SP Fittings For use with foowing fittings; SP Fittings IP54 SP Fittings - A, B, C, E & F SP Fittings - A, B, C, E & F SP Fittings - A, B, C, E & F IP65 SP Fittings - M & C90 SP Fittings - M & C90 SP Fittings - M & C90 IP67 NEW IP69k Static Appications: -15 C to +70 C Moving Appications: -5 C to +90 C Static Appications: -40 C to +120 C Moving Appications: -25 C to +150 C Static Appications: -25 C to +90 C Moving Appications: -5 C to +105 C UV Resistance Very Fexibiity & Fatigue Life Fexibity - Medium Fatigue Life Medium Fexibity - Medium Fatigue Life Medium Fexibity - Medium Fatigue Life Fire Performance & EMI Screen Sef Extinguishing Sef Extinguishing Haogen Free Approvas System Appications 52 Machine Toos Indoor/Outdoor Genera Purpose Industria Food Industry Manufacturing Areas Rai Food Industry Pubic Buidings

53 PRODUCT CHARACTERISTICS Materias TYPE A STRAIGHT FITTING - FIXED EXTERNAL THREAD For insertion into knockouts using a ocknut. Nicke pated brass TYPE B STRAIGHT FITTING - SWIVEL EXTERNAL THREAD For insertion into threaded entries & knockouts. Nicke pated brass TYPE C90 NEW 90 COMBINED FITTING & ELBOW with mae externa thread. Nicke pated stee Exampe NOMINAL CONDUIT SIZE (mm) OUTSIDE DIAMETER (mm) PG THREAD PG THREAD M12 SP10/M12/A PG7 SP10/PG7/A M16 SP12/M16/A PG9 SP12/PG9/A M16 SP16/M16/A PG11 SP16/PG11/A M20 SP16/M20/A PG11 SP16/PG11/A M20 S/M20/A PG16 S/PG16/A M25 SP25/M25/A PG21 SP25/PG21/A M2 SP2/M2/A PG29 SP2/PG29/A M40 SP40/M40/A PG6 SP40/PG6/A M50 SP50/M50/A PG42 SP50/PG42/A M6 S/M6/A PG48 S/PG48/A M75 SP75/M75/A M12 SP10/M12/B PG7 SP10/PG7/B M16 SP12/M16/B PG9 SP12/PG9/B M16 SP16/M16/B PG11 SP16/PG11/B M20 SP16/M20/B PG11 SP16/PG11/B M20 S/M20/B PG16 S/PG16/B M25 SP25/M25/B PG21 SP25/PG21/B M2 SP2/M2/B PG29 SP2/PG29/B M40 SP40/M40/B PG6 SP40/PG6/B M50 SP50/M50/B PG42 SP50/PG42/B M16 SP16/M16/C90 M20 SP16/M20/C90 M20 S/M20/C90 M25 SP25/M25/C90 M2 SP2/M2/C90 IP Rating with appropriate fitting For use with foowing conduit; SP, SN & LFH-SP For use with foowing conduit; SP, SN & LFH-SP For use with foowing conduit; SP, SN & LFH-SP IP54 SP, SN & LFH-SP Conduit SP, SN & LFH-SP Conduit IP65 SP, SN & LFH-SP Conduit IP67 NEW IP69k Static Appications: -50 C to +00 C Moving Appications: -45 C to +250 C Static Appications: -50 C to +00 C Moving Appications: -45 C to +250 C Static Appications: -50 C to +00 C Moving Appications: -45 C to +250 C Fitting Characteristics Approvas 5

54 PRODUCT CHARACTERISTICS Materias TYPE M STRAIGHT SWIVEL FITTING - EXTERNAL THREAD For insertion into threaded entries & knockouts. Nicke pated brass TYPE F STRAIGHT FITTING - FIXED INTERNAL THREAD For attachment to externa threads & other fittings. Nicke pated brass TYPE C SMOOTH ENTRY BUSH For ocking conduit into pain hoes in encosures. Nicke pated brass TYPE E CONDUIT TERMINATOR Cabe Protection at exit point Nicke pated brass Exampe NOMINAL CONDUIT SIZE (mm) OUTSIDE DIAMETER (mm) PG THREAD NPT THREAD HOLE SIZE (mm) HOLE SIZE (mm) M16 SP12/M16/M PG9 SP12/PG9/M M16 SP16/M16/M PG11 SP16/PG11/M /8 SP16/08/M M20 SP16/M20/M PG1.5 SP16/PG1/M /8 SP16/08/M M20 S/M20/M PG16 S/PG16/M 1 /2 S/050/M M25 SP25/M25/M PG21 SP25/PG21/M /4 SP25/075/M M2 SP2/M2/M PG29 SP2/PG29/M 1 SP2/100/M M40 SP40/M40/M M50 SP50/M50/M M20 S/M20/F M25 SP25/M25/F M2 SP2/M2/F 9 SP10/9/C 12 SP12/12/C 16 SP16/16/C 16 SP16/16/C 20 S/20/C 25 SP25/25/C 2 SP2/2/C 40 SP40/40/C 51 SP50/51/C 61 S/61/C 7 5 SP75/75/C SP12/E SP16/E SP16/E S/E SP25/E SP2/E SP40/E SP50/E IP Rating with appropriate fitting For use with foowing conduit; SP, SN & LFH-SP For use with foowing conduit; SP, SN & LFH-SP For use with foowing conduit; SP, SN & LFH-SP For use with foowing conduit; SP, SN & LFH-SP IP54 SP, SN & LFH-SP Conduit SP, SN & LFH-SP Conduit SP, SN & LFH-SP Conduit IP65 SP, SN & LFH-SP Conduit IP67 NEW IP69k Static Appications: -50 C to +00 C Moving Appications: -45 C to +250 C Static Appications: -50 C to +00 C Moving Appications: -45 C to +250 C Static Appications: -50 C to +00 C Moving Appications: -45 C to +250 C Static Appications: -50 C to +00 C Moving Appications: -45 C to +250 C Fitting Characteristics Approvas 54

55 Adaptastee Liquid Tight metaic systems TYPE SPL, SPLHC & SPUL COVERED STEEL FLEXIBLE CONDUIT & TYPE SPL FITTINGS PRODUCT CHARACTERISTICS To order quote part no, coour, & ree ength - e.g. SPL10/GR/50M Materias TYPE SPL LIQUID TIGHT OIL RESISTANT COVERED STEEL FLEXIBLE CONDUIT PVC Covered Gavanised Stee Coour Back (Back), Grey (GR) & Orange (OR). TYPE SPLHC LIQUID TIGHT EXTREME TEMPERATURE COVERED STEEL FLEXIBLE CONDUIT Thermopastic Rubber Covered Gavanised Stee Coour Back (Back) ony. TYPE SPUL LIQUID TIGHT UL LISTED & CSA APPROVED COVERED STEEL FLEXIBLE CONDUIT PVC Covered Gavanised Stee with Copper Packing Coour Grey (GR) ony. Exampe NOMINAL CONDUIT SIZE (mm) OUTSIDE DIAMETER (mm) US CONDUIT SIZE (in) INSIDE DIAMETER (mm) MINIMUM BEND RADIUS (mm) REEL LENGTH (m) INSIDE DIAMETER (mm) MINIMUM BEND RADIUS (mm) REEL LENGTH (m) INSIDE DIAMETER (mm) MINIMUM BEND RADIUS (mm) REEL LENGTH (m) / / / / / / / SPL , 25, 50 SPL , 25, 50 SPL , 25, 50 SPL , 25, 50 SPL , 25, 50 SPL , 25 SPL , 25 SPL , 25 SPL , 25 SPLHC , 50 SPLHC , 50 SPLHC SPLHC SPLHC SPLHC SPLHC SPLHC SPLHC SPUL SPUL SPUL SPUL SPUL SPUL SPUL IP Rating with appropriate fitting For use with foowing fittings; SPL fittings For use with foowing fittings; SPL fittings For use with foowing fittings; SPL fittings IP40 IP65 SPL fittings - M & C90 SPL fittings - M & C90 SPL fittings - M & C90 IP67 SPL fittings - A, B, & M SPL fittings - A, B, & M SPL fittings - A, B, & M SPL fittings - M SPL fittings - M SPL fittings - M NEW IP69k SPL fittings - M SPL fittings - M SPL fittings - M Static Appications: -20 C to +105 C Moving Appications: -5 C to +105 C Static Appications: -65 C to +15 C Moving Appications: -45 C to +150 C Static Appications: -15 C to +75 C Moving Appications: -5 C to +105 C UV Resistance Very Very Fexibiity & Fatigue Life Medium Fexibity - Medium Fatigue Life Very Fexibity - Fatigue Life Medium Fexibity - Medium Fatigue Life Fire Performance & EMI Screen Sef Extinguishing Sef Extinguishing Haogen Free Sef Extinguishing Approvas System Appications Machine Toos Extreme Temperature Environments Machinery for US Markets 55

56 Adaptastee Liquid Tight metaic systems TYPE SPL, SPLHC & SPUL COVERED STEEL FLEXIBLE CONDUIT & TYPE SPL FITTINGS PRODUCT CHARACTERISTICS Materias TYPE M STRAIGHT SWIVEL FITTING - EXTERNAL THREAD For insertion into threaded entries & knockouts. Nicke pated brass TYPE A STRAIGHT FITTING - FIXED EXTERNAL THREAD For insertion into knockouts using a ocknut. Nicke pated brass TYPE B STRAIGHT FITTING - SWIVEL EXTERNAL THREAD For insertion into threaded entries & knockouts. Nicke pated brass Exampe NOMINAL CONDUIT SIZE (mm) OUTSIDE DIAMETER (mm) US CONDUIT SIZE (in) PG THREAD NPT THREAD / / / / / / / / M12 SPL10/M12/M PG7 SPL10/PG7/M M16 SPL12/M16/M PG9 SPL12/PG9/M M16 SPL16/M16/M PG11 SPL16/PG11/M /8 SPL16/08/M M20 SPL16/M20/M PG1.5 SPL16/PG1/M /8 SPL16/08/M M20 SPL20/M20/M PG16 SPL20/PG16/M 1 /2 SPL20/050/M M25 SPL25/M25/M PG21 SPL25/PG21/M /4 SPL25/075/M M2 SPL2/M2/M PG29 SPL2/PG29/M 1 SPL2/100/M M40 SPL40/M40/M PG6 SPL40/PG6/M 1 1 /4 SPL40/125/M M50 SPL50/M50/M PG42 SPL50/PG42/M 1 1 /2 SPL50/150/M M6 SPL6/M6/M PG48 SPL6/PG48/M M16 SPL16/M16/A M20 SPL16/M20/A M20 SPL20/M20/A M25 SPL25/M25/A M2 SPL2/M2/A M16 SPL16/M16/B M20 SPL16/M20/B M20 SPL20/M20/B M25 SPL25/M25/B M2 SPL2/M2/B IP Rating with appropriate fitting For use with foowing conduit; SPL, SPLHC & SPUL Conduit For use with foowing conduit; SPL, SPLHC & SPUL Conduit For use with foowing conduit; SPL, SPLHC & SPUL Conduit IP54 IP65 SPL, SPLHC & SPUL Conduit IP67 SPL, SPLHC & SPUL Conduit SPL, SPLHC & SPUL Conduit SPL, SPLHC & SPUL Conduit SPL, SPLHC & SPUL Conduit - 10bar 0 mins NEW IP69k SPL, SPLHC & SPUL Conduit Static Appications: -65 C to +00 C Moving Appications: -45 C to +250 C Static Appications: -65 C to +00 C Moving Appications: -45 C to +250 C Static Appications: -65 C to +00 C Moving Appications: -45 C to +250 C Fitting Characteristics Approvas 56

57 PRODUCT CHARACTERISTICS Materias TYPE E CONDUIT TERMINATOR Cabe Protection at exit point Nicke pated brass TYPE C90 90 COMBINED FITTING & ELBOW with mae externa thread. Nicke pated stee TYPE ELBOW - FIXED THREAD Nicke pated brass Exampe NOMINAL CONDUIT SIZE (mm) OUTSIDE DIAMETER (mm) US CONDUIT SIZE (in) / / / / / / / / SPL10/E SPL12/E SPL16/E SPL16/E SPL20/E SPL25/E SPL2/E SPL40/E SPL50/E SPL6/E M16 SPL16/M16/C90 M20 SPL16/M20/C90 M20 SPL20/M20/C90 M25 SPL25/M25/C90 M2 SPL2/M2/C90 M16* B/M16/45 M20 B/M20/45 M20 B/M20/45 M25 B/M25/45 M2 B/M2/45 * Incudes M20 Interna Thread IP Rating with appropriate fitting For use with foowing conduit; SPL, SPLHC & SPUL For use with foowing conduit; SPL, SPLHC & SPUL For use with foowing conduit; SPL, SPLHC & SPUL IP54 IP65 IP67 SPL, SPLHC & SPUL NEW IP69k Static Appications: -65 C to +00 C Moving Appications: -45 C to +250 C Static Appications: -65 C to +00 C Moving Appications: -45 C to +250 C Static Appications: -65 C to +00 C Moving Appications: -45 C to +250 C Fitting Characteristics None None None Approvas 57

58 Adaptastee overbraided metaic system TYPE SB, STC, SSB & SSBGS SPECIALIST EMI SCREEN CONDUIT & TYPE SB FITTINGS PRODUCT CHARACTERISTICS To order quote part no & ree ength - e.g. SB10/25M TYPE SB OVERBRAIDED FLEXIBLE CONDUIT TYPE STC OVERBRAIDED FLEXIBLE CONDUIT TYPE SSB NEW OVERBRAIDED FLEXIBLE CONDUIT TYPE SSBGS NEW OVERBRAIDED FLEXIBLE CONDUIT Materias Gavanised Stee Conduit Gavanised Stee overbraid Gavanised Stee Conduit Tinned Copper overbraid Stainess Stee Conduit Stainess Stee overbraid Gavanised Stee Conduit Stainess Stee overbraid Exampe NOMINAL CONDUIT SIZE (mm) OUTSIDE DIAMETER (mm) INSIDE DIAMETER (mm) MINIMUM BEND RADIUS (mm) REEL LENGTH (m) INSIDE DIAMETER (mm) MINIMUM BEND RADIUS (mm) REEL LENGTH (m) INSIDE DIAMETER (mm) MINIMUM BEND RADIUS (mm) REEL LENGTH (m) INSIDE DIAMETER (mm) MINIMUM BEND RADIUS (mm) REEL LENGTH (m) SB SB SB SB SB SB SB SB SB SB STC STC STC STC STC STC STC STC SSB SSB SSB SSB SSB SSBGS SSBGS SSBGS SSBGS SSBGS IP Rating with appropriate fitting For use with foowing fittings; SB Fittings For use with foowing fittings; SB Fittings For use with foowing fittings; SB Fittings For use with foowing fittings; SB Fittings IP40 SB Fittings - A & B SB Fittings - A & B SB Fittings - A & B SB Fittings - A & B IP65 IP67 NEW IP69k Static Appications: -50 C to +00 C Moving Appications: -45 C to +250 C Static Appications: -50 C to +00 C Moving Appications: -45 C to +250 C Static Appications: -50 C to +00 C Moving Appications: -45 C to +250 C Static Appications: -50 C to +00 C Moving Appications: -45 C to +250 C UV Resistance Very Very Very Very Fexibiity & Fatigue Life Fexibity - Fatigue Life Fexibity - Fatigue Life Fexibity - Fatigue Life Fexibity - Fatigue Life Fire Performance, EMI Screen & Fitting Characteristics Approvas System Appications Industria Rai Hospitas Corrosive Environments Chemicas Heavy Industria 58

59 PRODUCT CHARACTERISTICS Materias TYPE A STRAIGHT FITTING - FIXED EXTERNAL THREAD For insertion into knockouts using a ocknut Nicke pated brass TYPE B STRAIGHT FITTING - SWIVEL EXTERNAL THREAD For insertion into threaded entries & knockouts. Nicke pated brass Exampe NOMINAL CONDUIT SIZE (mm) OUTSIDE DIAMETER (mm) PG THREAD ALL MTO M12 M16 M16 M20 M25 M2 M40 M50 M6 M75 SB10/M12/A SB12/M16/A SB16/M16/A SB20/M20/A SB25/M25/A SB2/M2/A SB40/M40/A SB50/M50/A SB6/M6/A SB75/M75/A M12 SB10/M12/B PG7 SB10/PG7/B M16 SB12/M16/B PG9 SB12/PG9/B M16 SB16/M16/B PG11 SB16/PG11/B M20 SB20/M20/B PG16 SB20/PG16/B M25 SB25/M25/B PG21 SB25/PG21/B M2 SB2/M2/B PG29 SB2/PG29/B M40 SB40/M40/B PG6 SB40/PG6/B M50 SB50/M50/B PG42 SB50/PG42/B IP Rating with appropriate fitting IP40 IP65 IP67 NEW IP69k For use with foowing conduit; SB, STC, SSB & SSBGS Conduit SB, STC, SSB & SSBGS Conduit For use with foowing conduit; SB, STC, SSB & SSBGS Conduit SB, STC, SSB & SSBGS Conduit Static Appications: -50 C to +00 C Moving Appications: -45 C to +250 C Static Appications: -50 C to +00 C Moving Appications: -45 C to +250 C UV Resistance Fexibiity & Fatigue Life Fitting Characteristics Approvas 59

60 Adaptastee overbraided metaic system TYPE SPB & SPTC SPECIALIST LIQUID RESISTANT, EMI SCREEN CONDUIT & TYPE SPB FITTINGS PRODUCT CHARACTERISTICS To order quote part no & ree ength - e.g. SPB10/25M TYPE SPB OVERBRAIDED FLEXIBLE CONDUIT TYPE SPTC OVERBRAIDED FLEXIBLE CONDUIT TYPE A STRAIGHT FITTING - FIXED EXTERNAL THREAD For insertion into knockouts using a ocknut. TYPE B STRAIGHT FITTING - SWIVEL EXTERNAL THREAD For insertion into threaded entries & knockouts. Materias Gavanised Stee Conduit with PVC Covering Gavanised Stee overbraid Gavanised Stee Conduit with PVC Covering Tinned Copper overbraid Nicke pated brass Nicke pated brass Exampe NOMINAL CONDUIT SIZE (mm) OUTSIDE DIAMETER (mm) INSIDE DIAMETER (mm) MINIMUM BEND RADIUS (mm) REEL LENGTH (m) INSIDE DIAMETER (mm) MINIMUM BEND RADIUS (mm) REEL LENGTH (m) PG THREAD ALL MTO SPB SPB SPB SPB SPB SPB SPB SPB SPTC SPTC SPTC SPTC SPTC SPTC SPTC SPTC M12 M16 M16 M20 M25 M2 M40 M50 SPB10/M12/A SPB12/M16/A SPB16/M16/A SPB20/M20/A SPB25/M25/A SPB2/M2/A SPB40/M40/A SPB50/M50/A M12 SPB10/M12/B PG7 SPB10/PG7/B M16 SPB12/M16/B PG9 SPB12/PG9/B M16 SPB16/M16/B PG11 SPB16/PG11/B M20 SPB20/M20/B PG16 SPB20/PG16/B M25 SPB25/M25/B PG21 SPB25/PG21/B M2 SPB2/M2/B PG29 SPB2/PG29/B M40 SPB40/M40/B PG6 SPB40/PG6/B M50 SPB50/M50/B PG42 SPB50/PG42/B IP Rating with appropriate fitting For use with foowing fittings; SPB Fittings For use with foowing fittings; SPB Fittings For use with foowing conduit; SPB & SPTC For use with foowing conduit; SPB & SPTC IP54 SPB Fitting - A & B SPB Fitting - A & B SPB & SPTC SPB & SPTC IP65 IP67 NEW IP69k Static Appications: -15 C to +70 C Moving Appications: -5 C to +90 C Static Appications: -15 C to +70 C Moving Appications: -5 C to +90 C Static Appications: -50 C to +00 C Moving Appications: -45 C to +250 C Static Appications: -50 C to +00 C Moving Appications: -45 C to +250 C UV Resistance Very Very Fexibiity & Fatigue Life Fexibity - Medium Fatigue Life Fexibity - Medium Fatigue Life Fire Performance, EMI Screen & Fitting Characteristics Approvas System Appications Security Lighting Hospitas Externa Safety Critica Areas 60

61 Adaptastee overbraided metaic system TYPE SPLHCB SPECIALIST LIQUID TIGHT HIGH STRENGTH CONDUIT & TYPE SPLB FITTINGS PRODUCT CHARACTERISTICS TYPE SPLHCB EXTREME TEMPERATURE, ABUSE RESITANT, OVERBRAIDED FLEXIBLE CONDUIT TYPE A STRAIGHT FITTING - FIXED EXTERNAL THREAD For insertion into knockouts using a ocknut. TYPE B STRAIGHT FITTING - SWIVEL EXTERNAL THREAD For insertion into threaded entries & knockouts. Materias Exampe Gavanised Stee Conduit, Smooth Thermopatic Rubber Covering, Stainess Stee Overbraid Nicke pated brass Nicke pated brass NOMINAL CONDUIT SIZE (mm) OUTSIDE DIAMETER (mm) TYPE SB INSIDE DIAMETER (mm) MINIMUM BEND RADIUS (mm) REEL LENGTH (m) SPLHCB SPLHCB SPLHCB SPLHCB SPLHCB SPLHCB SPLHCB M16 M20 M20 M25 M2 M40 M50 SPLB16/M16/A SPLB16/M20/A SPLB20/M20/A SPLB25/M25/A SPLB2/M2/A SPLB40/M40/A SPLB50/M50/A M16 SPLB16/M16/B M20 SPLB16/M20/B M20 SPLB20/M20/B M25 SPLB25/M25/B M2 SPLB2/M2/B IP Rating with appropriate fitting For use with foowing fittings; SPLB Fittings For use with foowing conduit; SPLHCB For use with foowing conduit; SPLHCB IP40 IP65 SPLB Fittings - A & B SPLHCB SPLHCB IP67 SPLB Fittings - A & B SPLHCB SPLHCB SPLB Fittings - A & B SPLHCB - 10bar 0 mins SPLHCB - 10bar 0 mins NEW IP69k Static Appications: -65 C to +15 C Moving Appications: -45 C to +150 C Static Appications: -65 C to +00 C Moving Appications: -45 C to +250 C Static Appications: -65 C to +00 C Moving Appications: -45 C to +250 C UV Resistance Very Fexibiity & Fatigue Life Very Fexibity - Fatigue Life Fire Performance, EMI Screen & Fitting Characteristics Approvas System Appications Raiways Underground Pubic Buidings 61

62 Metaic accessories LOCKNUTS, P-CLIPS, 90 & 45 ELBOWS, PROXIMITY SWITCH ADAPTORS & FEMALE COUPLERS PRODUCT CHARACTERISTICS TYPE LNB/LNS METALLIC LOCKNUTS TYPE P P-CLIP CONDUIT SUPPORT TYPE 90/45 BRASS ELBOWS Materias Nicke Pated Brass Gavanised Stee Pated stee construction with PVC insert Nicke Pated Brass Exampe NICKEL PLATED BRASS GALVANISED STEEL PG THREAD NICKEL PLATED BRASS NPT THREAD STEEL NOMINAL CONDUIT SIZE (mm) METRIC INTERNAL THREAD EXTERNAL THREAD 90 ELBOW 45 ELBOW M12 x1.0 LNB/M12 X1 M12 x1.5 LNB/M12 M16 LNB/M16 LNS/M16 M20 LNB/M20 LNS/M20 M25 LNB/M25 LNS/M25 M2 LNB/M2 LNS/M2 M40 LNB/M40 M50 LNB/M50 M6 LNB/M6 M75 LNB/M75 PG7 PG9 PG11 PG1.5 PG16 PG21 PG29 PG6 PG42 PG48 LNB/PG7 LNB/PG9 LNB/PG11 LNB/PG1 LNB/PG16 LNB/PG21 LNB/PG29 LNB/PG6 LNB/PG42 LNB/PG48 /8 " LNS/08 1 /2 " LNS/050 /4 " LNS/075 1 " LNS/ /4 " LNS/ /2 " LNS/150 2" LNS/ P CLIP/10 12 P CLIP/12 16 P CLIP/16 16 P CLIP/16 20 P CLIP/20 25 P CLIP/25 2 P CLIP/2 40 P CLIP/40 50 P CLIP/50 6 P CLIP/6 75 P CLIP/75 M16 M16 B/M16/90 M20 M16 B/M16/45 M20 M20 B/M20/90 B/M20/45 M25 M25 B/M25/90 B/M25/45 M2 M2 B/M2/90 B/M2/45 M20 1 /2" NPT B/050/90 B/050/45 M25 /4" NPT B/075/90 B/075/45 M2 1" NPT B/100/90 B/100/45 M16 PG9 B/PG9/90 M16 PG11 B/PG11/90 B/PG11/45 M20 PG1.5 B/PG1/90 B/PG1/45 M20 PG16 B/PG16/90 B/PG16/45 M25 PG21 B/PG21/90 B/PG21/45 TYPE PSA PROXIMITY SWITCH CONNECTORS TYPE TC UNEF THREAD CONVERTERS WITH TWO INTERNAL THREADS FEMALE COUPLER BRASS FEMALE COUPLER Materias Nicke Pated Brass Nicke Pated Brass Nicke Pated Brass Exampe INTERNAL THREAD TO M16 INTERNAL THREAD TO PG9 INTERNAL THREAD INTERNAL THREAD TO M16 INTERNAL THREAD TO M20 INTERNAL THREAD TO M25 INTERNAL THREAD TO M2 INTERNAL THREAD TO PG21 INTERNAL THREAD THREAD PART NUMBER 62 M12 x 1.0 PSA16/M12 PSA9/M12 M18 x 1.0 PSA16/M18 PSA9/M18 M0 PSA16/M0 PSA9/M0 5 /8"UNEF B/06U-M16/TC /4"UNEF B/075U-M16/TC B/075U-M20/TC 7 /8"UNEF B/088U-M20/TC 1"UNEF B/100U-M20/TC B/100U-M25/TC 1 /16"UNEF B/119U-M20/TC B/119U-M25/TC 1 5 /16"UNEF B/11U-M20/TC 1 7 /16"UNEF B/144U-M25/TC B/144U-M2/TC B/144U-PG21/TC M16 M20 M25 M2 M40 M50 M6 M75 B/M16/C B/M20/C B/M25/C B/M2/C B/M40/C B/M50/C B/M6/C B/M75/C

63 Metaic accessories ENLARGERS, REDUCERS & CONVERTERS PRODUCT CHARACTERISTICS TYPE E, TYPE R & TYPE TC ENLARGERS, REDUCERS & CONVERTERS Materias Nicke Pated Brass Exampe EXTERNAL THREAD TO M12 INTERNAL THREAD TO M16 INTERNAL THREAD TO M20 INTERNAL THREAD TO M25 INTERNAL THREAD TO M2 INTERNAL THREAD TO M40 INTERNAL THREAD TO 1 /2" NPT INTERNAL THREAD M16 B/M16-M12/R B/M16-M20/E M20 B/M20-M12/R B/M20-M16/R B/M20-M25/E B/M20-050/TC M25 B/M25-M20/R B/M25-M2/E M2 B/M2-M25/R M40 B/M40-M2/R M50 B/M50-M40/R PG7 B/PG7-M16/TC B/PG7-M20/TC PG9 B/PG9-M16/TC B/PG9-M20/TC PG11 B/PG11-M16/TC B/PG11-M20/TC B/PG11-050/TC PG1.5 B/PG1-M16/TC B/PG1-M20/TC PG16 B/PG16-M16/TC B/PG16-M20/TC B/PG16-M25/TC B/PG16-050/TC PG21 B/PG21-M16/TC B/PG21-M20/TC B/PG21-M25/TC B/PG21-M2/TC PG29 B/PG29-M20/TC B/PG29-M25/TC B/PG29-M2/TC B/PG29-M40/TC PG6 B/PG6-M2/TC B/PG6-M40/TC PG42 PG48 1 /2"NPT B/050-M16/TC B/050-M20/TC EXTERNAL THREAD TO PG7 INTERNAL THREAD TO PG9 INTERNAL THREAD TO PG11 INTERNAL THREAD TO PG1.5 INTERNAL THREAD TO PG16 INTERNAL THREAD TO PG21 INTERNAL THREAD TO PG29 INTERNAL THREAD TO PG6 INTERNAL THREAD TO PG42 INTERNAL THREAD TO PG48 INTERNAL THREAD M16 B/M16-PG7/TC B/M16-PG9/TC B/M16-PG11/TC M20 B/M20-PG7/TC B/M20-PG9/TC B/M20-PG11/TC B/M20-PG1/TC B/M20-PG16/TC B/M20-PG21/TC M25 B/M25-PG21/TC M2 B/M2-PG29/TC M40 M50 PG7 B/PG7-PG9/E PG9 B/PG9-PG7/R B/PG9-PG11/E B/PG9-PG1/E PG11 B/PG11-PG7/R B/PG11-PG9/R B/PG11-PG1/E B/PG11-PG16/E PG1.5 B/PG1-PG7/R B/PG1-PG9/R B/PG1-PG11/R B/PG1-PG16/E B/PG1-PG21/E PG16 B/PG16-PG7/R B/PG16-PG9/R B/PG16-PG11/R B/PG16-PG1/R B/PG16-PG21/E PG21 B/PG21-PG11/R B/PG21-PG1/R B/PG21-PG16/R B/PG21-PG29/E PG29 B/PG29-PG16/R B/PG29-PG21/R B/PG29-PG6/E PG6 B/PG6-PG21/R B/PG6-PG29/R B/PG6-PG42/E B/PG6-PG48/E PG42 B/PG42-PG29/R B/PG42-PG6/R B/PG42-PG48/E PG48 B/PG48-PG6/R B/PG48-PG42/R 6

64 NEW IMPROVED Convenience Packs for the Professiona Instaer avaiabe in 20 & 25mm diameter conduit systems PRODUCT CHARACTERISTICS LFH Professiona INSTALLER PACK - LFH NYLON 6 CONDUIT WITH ADAPTALOK FITTINGS AND CABLE GLANDS. Liquid Resistant Convenience CONVENIENCE PACK - TYPE SP ADAPTASTEEL PVC COVERED STEEL CONDUIT WITH FIXED & SWIVEL FITTINGS. Budget Professiona INSTALLER PACK - A BUDGET PACK, USING POLYPROPYLENE CONDUIT. [FOR LIMITED APPLICATIONS] Exampe PACK CONTENTS CONDUIT 10m Back PA LFH Nyon 6 10m Back SP PVC Covered Stee 10m Grey PP Poypropyene CONDUIT CLIPS ONE-PIECE CONDUIT FITTING LOCKNUTS FIXED MALE FITTING 5 SWIVEL MALE FITTING 5 M20 CABLE GLANDS IP RATING IP54 CP-AF20BS-PP-INST PART NO s CP-AF20A-BS-LFH & CP-AF25A-BS-LFH CP-AF20SP-BS Pack of 10 Fittings (Straight) CP-AF20A-APP, CP-AF25A-APP Exampe LFH Convenience CONVENIENCE PACK - ADAPTALOK NYLON CONDUIT WITH ONE-PIECE, FAST FIT, PUSH & TWIST FITTINGS. Retai/Office Convenience CONVENIENCE PACK - A GENERAL PURPOSE PACK WITH GREY & WHITE SELF-EXTINGUISHING PVC PLIABLE CONDUIT & ONE-PIECE FITTINGS & LOCKNUTS. Budget Convenience CONVENIENCE PACK - TYPE PP POLYPROPYLENE CONDUIT WITH ONE-PIECE, FAST FIT, PUSH & TWIST FITTINGS. [FOR LIMITED APPLICATIONS] PACK CONTENTS CONDUIT 10m Back PA Poyamide (Nyon) 6 10m Grey & White KF PVCu 10m Grey PP Poypropyene ONE-PIECE CONDUIT FITTING LOCKNUTS IP RATING IP54 IP54 PART NO s CP-AF20A & CP-AF25A (Back ony) CP-AF20BS & CP-AF25BS (Grey ony) CP-AF20BS-PP & CP-AF25BS-PP (Grey ony) Pack of 10 Fittings (Straight) AL21/M20/A/BL, AL28/M20/A/BL CP-KF20BS & CP-KF25BS (White ony) Pack of 10 Fittings (Straight) CP-AF20A-APP, CP-AF25A-APP 64

65 Technica Section THREAD DATA, EMI SCREEN SYSTEM & FIRE PERFORMANCE Thread Data METRIC Standard thread conforming to EN6042 & BS64 PG German Standard thread conforming to DIN4040 PF Japanese conduit thread conforming to JIS B 0202 NPT US taper sea pipe thread conforming to ANSI/ASME B UNEF American Unified Thread conforming to BS1580 THREAD SIZE mm EXT THREAD OUTSIDE DIAMETER INT THREAD INSIDE DIAMETER PITCH M M M M M M M M M M M M M M NOTE: Dimensions are nomina & in mm uness otherwise stated. EMI Screen System THREAD SIZE mm EXT THREAD OUTSIDE DIAMETER PG PG PG PG PG PG PG PG PG PG MHz STANDARD EMI SCREEN INT THREAD INSIDE DIAMETER PITCH THREAD SIZE (inches) SCREENING LEVEL 100MHz ENHANCED EMI SCREEN EXT THREAD OUTSIDE DIAMETER INT THREAD INSIDE DIAMETER PITCH 1 / / / / / / MHz HIGH EMI SCREEN THREAD SIZE (inches) EXT THREAD OUTSIDE DIAMETER PITCH / / / / / THREAD SIZE (inches) EXT THREAD OUTSIDE DIAMETER INT THREAD INSIDE DIAMETER PITCH 5 / / / / / / / / / / / / / For appications where eectromagnetic interference is of particuar concern we have cassified suitabe conduit systems by means of symbos. These are reated in an ascending scae of performance from Standard EMI Screen (products featuring a stainess stee overbraid) through to EMI Screen (products featuring a tinned copper overbraid). Contact us for fu detais. Fire Performance LOW FIRE HAZARD ENHANCED LOW FIRE HAZARD SUPER LOW FIRE HAZARD INHERENT LOW FIRE HAZARD PROPERTY LFH ELFH SLFH ILFH OXYGEN INDEX ISO4589 1% OI 28% OI 5% OI 5% Inherent Low BS685 SMOKE DENSITY m 0.02 A A A Fire Hazard ZERO HALOGEN i.e. ZERO PHOSPHORUS S, SS, SPB ZERO SULPHUR STC, SSB & SSBGS LONDON UNDERGROUND CONCESSION APPROVED APPROVED Metaic Conduit TOXICITY INDEX NES71 ISSUE 5.0 TI TI 5.0 TI 0.5 & Fittings NFF IF2 I2F2 I2F1 Adaptafex has introduced a set of symbos to hep the user specify conduit systems for instaations where fire performance is of particuar concern. Each symbo encompasses a range of properties reevant to the high specification materias used in the construction of the conduit. They are in an ascending scae of performance from Low Fire Hazard (LFH) featuring zero haogen through to Super Low Fire Hazard (SLFH) featuring zero nitrogen. In addition, Inherent Low Fire Hazard systems (ILFH) are cassified as being a meta systems. 65

66 Technica Section IP RATINGS & FITTING CHARACTERISTICS Ingress Protection (IP) Rating according to EN 60529/DIN IP suitabiity ratings are a system for cassifying the degree of protection provided by encosures of eectrica equipment. The higher the number, the greater the degree of protection; they appy ONLY to propery instaed equipment. The numeras stand for the foowing: The first digit stands for: Protection against Dust Protection against Soid Bodies Degree of protection for persons against access to hazardous parts inside the encosure and/or against the ingress of soid foreign objects. 0 No protection The second digit stands for: Protection against Water Protection against Water Degree of protection of equipment inside encosures against damage from the ingress of water. 0 No protection 1 Objects greater than 50 mm, accidenta touch by hands 1 Protected against verticay faing drops of water 2 Objects greater than 12 mm, accidenta touch by fingers 2 Protected against direct sprays of water up to 15 from vertica Objects greater than 2.5 mm, e.g. toos/wires Protected against sprays of water to 60 from vertica 4 Objects greater than 1 mm, e.g. toos/wires/sma wires 5 Protected against dust - imited ingress (no harmfu deposits) 6 Totay protected against dust (Dust-tight) Fitting Characteristics Protected against water sprayed from a directions - imited ingress permitted Protected against ow pressure jets of water from a directions - imited ingress permitted Protected against strong pressure jets of water, heavy seas- imited ingress permitted Protection against the Effects of immersion between 15cm - 1 m Protection against ong periods of immersion under a quoted pressure. E.g. 2 bar at 24 hours Fitting or thread swives independenty of conduit during instaation but is not suitabe as a rotating joint in constanty moving appications Fitting rotates independenty of the conduit to act as a rotating joint within constanty moving appications 9k IP69k Automotive standard DIN40050 and signifies resistance to high pressure jets of water (up to 80bar) from any ange. 66

67 Technica Section CHEMICAL RESISTANCE Chemica resistance comparison tabe Products PA, PR, PADL, SN PI CP KF, RF, SP PP PK Fittings PA66 ATS Eastomer Sea S (inc braid) SS (inc braid) LFH-SP SPL, SPUL SPLHC TC braid Fittings nicke pated brass Cheminca Astm no.1 n n Astm no.2 n s s Astm no. n s s s Acetic Acid (10%) s s s s s n s Acetone s n s n n Auminium Choride s n s s n s s NT Aniine s n n n s s n s n Benzadehyde s s s n s s s n n s Benzene s n s s n n n Carbon tetrachoride n s s s n s s Chorine Water n n s n s n n n n n s n n Choroform n n n n s n s n n s Citric acid Copper suphate s s Creso n n NT s s n n n s s Diese oi s s Diethyamine s s s n s Ethano s n s s n Ether NT s n s Ethyamine s NT s n s s s Ethyene Gyco s n s Ethy ethanoate s n s n n n Freon 2 s s n n s n Hydrchoric acid (10%) n s s n s n n n n Hydrchoric acid (6%) n n n s n n n n n n Hydrogen peroxide (5%) s s s s n n s s Hydrogen peroxide (87%) n n n s n n n n n s Lactic acid s n s s n s s Lubricating oi s s s Methano s s n s s s n Methy bromide n n NT n s n n n n s MEK s n s n n Nitric acid (10%) n n s n n n n n Nitric acid (70%) n n n n n n n n n n Oxaic acid s s s s s n s Ozone (gas) n n NT s s n n s s Paraffin oi s s Petro n n Pheno n n n s s n s n s s Sea water n s Siver nitrate NT n Skydro n s n n Sodium choride n s Sodium hydroxide (10%) n Sodium hydroxide (60%) s n s s n s Suphur dioxide (gas) n n s n n n n s s n Suphuric acid (10%) n s n s n n n n Suphuric acid (70%) n n n n n n n n s n n Touene s n n s n n Transformer oi s s s 1,1,1-Trichoroethane s n s s n s n s Trichoroethyene s n n n s s s n s n n Turpentine s n s n s n Vegetabe oi s s Viny acetate s NT n s n n n n Water n White spirit NT s s n s s Zinc choride n s n n s Key SUITABLE Note The information above is given as a guide ony and is based on pubished technica data and experience. LIMITED SUITABILITY s The chemica resistance of the above products is dependant on factors such as chemica exposure, concentration of the UNSUITABLE n chemica and temperature. The above chemicas are vaid for a temperature of 2 C. NOT TESTED NT Use of the above tabe is at the users own discretion and risk. Those using it must satisfy themseves that their appication presents no heath and safety risks. The end user shoud assess compatibiity with their appication and contact Adaptafex for further information. 67

68 Technica Section CABLE CARRYING CAPACITY (WIRE FILL) Introduction UK Wiring reguations BS7671 recommend that the tota cross sectiona area of the sum of individua cabes sha not exceed 40% of the cross sectiona area of the conduit based on using or more cabes. The tabes beow enabe you to cacuate the number of conductors that can be run within a piece of fexibe conduit. Instructions STEP 1 Estabish the number and size of each wire to be run in the conduit STEP 2 Look on the Cross Sectiona Area (CSA) chart (tabe 1), ook up the CSA taken up by each of the wires from STEP 1 STEP Add a the CSA vaues together (Tota CSA) STEP 4 Look on the conduit fi vaue chart (tabe 2). Choose a conduit with a 40% fi vaue higher than the tota CSA from STEP Tabe 1. Cross Sectiona Area (CSA) chart. NOMINAL CONDUCTOR SIZE NUMBER OF WIRES mm mm mm mm mm mm mm mm mm mm mm mm Tabe 2. Wire Fi of Pastic & Metaic Conduit. NOMINAL DIAMETER PLASTIC Conduit 100% FILL 40% FILL NOMINAL DIAMETER METALLIC Conduit 10mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm Exampe - What size of conduit to use? 100% FILL STEP 1. 4 x 2.5mm conductors, 2 x 10mm conductors and x 50mm conductors STEP 2. The CSA of Four 2.5mm conductors is 8.4, Two 10mm conductors is 58.6, Three 50mm conductors is 9 STEP. Tota of these groups is = 46 STEP 4. Using Tabe 2 the conduit is either 54mm (680) Pastic or 50mm (465.7) Metaic Note. 42mm Pastic is 90 which is smaer than 46 therefore not recommended 40% FILL The information given above reates to PA - Standard weight conduit and Adaptaok fittings or SPL with M- fittings. It is given in good faith and shoud be used ony as a guide in conjunction with the reevant wiring reguations. 68

69 Technica Section IEC6186 CLASSIFICATIONS IEC6186 Cassifications tabe Typica data shown for size 20/21 conduit. Non-metaic WITH FITTING COMRESSION STRENGTH IMPACT STRENGTH MINIMUM TEMP. MAXIMUM TEMP. BENDING PROPERTIES ELECTRICAL PROPERTIES IP RATING SOLIDS IP RATING WATER CORROSION RESISTANCE TENSILE STRENGTH NON-FLAME PROPOGATING PA LIGHT AL PA STANDARD AL PA HEAVY AL PADL AL PI LIGHT AL PI STANDARD AL PI HEAVY AL PR AL CP AL KF LIGHT KC KF STANDARD KC KF MEDIUM KC PK PK PKTC PB PKSS PB PRTC PB PRSS PB SUSPENDED LOAD CAPACITY Metaic S S SS S SP SP(M) SN SP(M) LFH-SP SP(M) SPL SPL(M) SPLHC SPL(M) SB SB STC SB SSB SB SSBGS SB SPB SPB SPTC SPB SPLHCB SPLB Performance Cassification Key Cassification Leve Units (N) (J) ( C) ( C) (N) - (N) Not decared - 0 N/A Not decared - Not decared Rigid Conductor - 1 Low Piabe Insuator - 2 Medium Pi/Semi Rigid Con/Ins Med-Hi Fexibe

70 Cutting Toos KWIKCUT, CUT-VICE, ROTOCUT & SWINGCUT PRODUCT CHARACTERISTICS KWIKCUT Kwikcut is the idea cutting too for non-metaic conduits (PA, PR, PI, PADL, CP, PP, KFL, KFS, KFM & XF) up to 2mm. CUT -VICE Cut-vice offers the abiity to produce a cean cut for conduit sizes 16mm to 40mm ROTOCUT Rotocut offers a simpe but effective method for cutting 20mm and 25mm S, SS, SP, LFH-SP and SN stee conduit types. Exampe INSTRUCTIONS Exampe Pace the conduit between the cutting bade and ower support, squeeze the handes and rotate the conduit for a cean, easy cut. Spare bades are avaiabe. Part No. KWIKCUT-BLADE SWINGCUT Swingcut is a versatie vice and saw combination too which faciitates a neat, square cut for iquid tight and piabe conduits between 10mm and 2mm. Six to one everage advantage provides a strong cutting action. Pace the conduit aong the vice body and tighten the camp. Hoding the conduit and integra hande together, insert a hacksaw bade into the guide and cut. For braided conduit, wrap adhesive tape around the cutting point to secure braid. Remove tape after cutting. Adjust the camping pin so that the conduit is just hed in the recess. Squeeze the ever and body whist rotating the cutting bade. When the bade appears on the inside of the conduit, reease the pressure and remove the conduit. A simpe twist wi then separate the two parts. Where the conduit is covered, the covering can be cut prior to separation. Spare bades are avaiabe. Part No. ROTOCUT-BLADE ADAPTACUT Making conduit cutting even quicker, easier and neater, Adaptacut from Adaptafex, can significanty hep reduce instaation times for rigid and fexibe conduit systems. Specificay engineered to aow for easy cutting of rigid PVC and fexibe nyon conduit, Adaptacut is a simpe, singe handed, quick and easy cutting too that is sure to become an essentia piece of kit for a eectricians and instaation engineers. fexibe rigid INSTRUCTIONS Pace the conduit in the vice and secure. Move the operating hande backwards and forwards whist appying increasing pressure to the supporting hande. Hardened captive spring oaded retaining pins make bade repacement easy. Spare bades are avaiabe. Part No. SWINGCUT-BLADE The cever compact design means that it is ight, fits easiy in a toobox and is simpe to use, whist the unique finger guard ensures that there is no unnecessary risk to the user. Safe and professiona, the device fits directy and comfortaby around the conduit pipe, making it idea for use in confined spaces. With a firm grip and 1-2 simpe rotations, the Adaptacut wi produce an effortess cean cut, time and time again without damaging the conduit. Adaptacut can aso be used, equay successfuy, to cut rigid PVC conduit pipe, incuding MDPE, PE, PP, HE, and P-EX. The innovative product provides a neat square cut, without the need for hacksaws or shears. The Adaptacut cutting toos are currenty avaiabe in two designs and two sizes, adaptacut rigid in 20mm and 25mm diameter options and Adaptacut fexibe in 21mm and 28mm diameter options, so as to suit the most popuar ranges of rigid and fexibe conduit systems on the market today. 70

71 NEW Cutting Toos KOPEX PIPETOOLS - PIPESLICE & PIPE-PREP PRODUCT CHARACTERISTICS Exampe KOPEX - PIPESLICE & PIPE-PREP Kopex Corgi award winning products Pipesice & Pipe-Prep are avaiabe from Adaptafex. The abour-saving Kopex Pipe Toos require just a few twists of the wrist and their encased design means that sharp edges are kept away from fingers. Their cever, compact design makes both Pipesice and Pipe-prep suitabe for use in the tightest spaces and a modes take itte room in the toobox. Pipesice is the genuine pipe cutting too. It is a singe handed pumbing too that makes copper pipe cutting easy, with just a few simpe twists of the wrist. A Corgi award winner for technica innovation, the practica design aows singe handed operation with automatic adjusting and ocking-on for ease of use. Pipe-Prep is a brand new combination too that ceans and deburrs copper pipe ends. Fattening and smoothing, rather than grinding and cutting off burrs, the too maintains the integrity of the materia and produces the right shape for subsequent joining. Pipe-Prep removes oxidisation, a common cause of pipe joint faiures, making it easier and quicker to achieve sound and reiabe pipe connections TPSS15 TPSS21 TPSS22 TPSS27 TPSS28 TPPS15 TPPS22 TPSC1515 TPSC2222 TPST DESCRIPTION 15mm Pipesice - Singe Pack 21mm Pipesice - Singe Pack 22mm Pipesice - Singe Pack 27mm Pipesice - Singe Pack 28mm Pipesice - Singe Pack 15mm Pipe-prep - Singe Pack 22mm Pipe-prep - Singe Pack 15mm Pipesice + 15mm Pipe-Prep - Combination Packs 22mm Pipesice + 22mm Pipe-Prep - Combination Packs 15mm, 22mm, 28mm Pipesice - Professiona Instaer Pack Both Pipesice and Pipe-prep are deivered in bister packs and new combination packs are avaiabe with a 15mm Pipesice and 15mm Pipe-prep. A 22mm version is aso avaiabe. For the professiona instaer there is a tripe pack which incudes the popuar sizes of 15mm, 22mm and 28mm Pipesice. Genuine repacement bades for Pipesice modes are sod separatey. CUTTING & ASSEMBLY GUIDE Assemby of a Adaptafex s conduit and fittings is now covered in a new cutting instructions booket, which covers the correct cutting of conduit and how to assembe and attach the fittings. By foowing the easy steps you are assured of correct instaation and peak operating performance. The booket aso provides usefu tips, gained from actua instaation experiences, which just might save you time in the future, when next instaing Adaptafex fexibe conduit systems. - Ask for your copy today. 71

72 Accessories Cabe Gands & Termina Bocks Range Overview As a brand Ekay products have been in existence for over 75 years. We have incorporated some of their top seing items within this cataogue to give you the opportunity to view a comprehensive range of compementary products. Incorporating high quaity design and manufacture, products incude cabe gands, termina bocks, ow profie DIN rai terminas and accessories. Cabe Gands Cabe Gands provide seaing and retention for a wide range of cabes for genera indoor and outdoor appications. The Standard Range of Hex cabe gands has been widey recognised as the UK Industry Standard for pastic cabe gands for over 0 years offering exceent a-round performance. Euro Index is the next generation of Cabe Gands with enhanced IP and oad functionaity. Aso avaiabe is the Index Cabe Gand range providing high strength and performance for a variety of appications. A range of accessories are avaiabe incuding seas, grommets, metric adaptors and reducers, ocknuts and seaing washers. System approvas avaiabe: Termina Bocks New from Adaptafex is a range of genera usage and OEM termina bocks. The genera purpose 12 poe products are competitivey priced, poyethyene terminas bocks that offer fexibiity, versatiity, are neutray cooured and come with CE Approva. Avaiabe in, 5, 15 and 0 Amp oads they are easiy cut into the required number of poes and can be mounted on a surface within an encosure. The new range of OEM termina bocks is now avaiabe in standard 12-poe options. The new termina bocks are mouded from a speciay deveoped Poyamide 6/66 Copoymer, which meets the arduous gow wire tests as specified in Internationa Standard IEC and IEC This range are avaiabe in eight size options and are idea for use in appiances, ighting, industria, domestic, and commercia appications and the white termina bocks are avaiabe with raised or eve base options. 72

73 Cabe Gands STANDARD CABLE GLAND PRODUCT CHARACTERISTICS To order quote part no. & coour - e.g. 248-B Materias Standard Cabe Gand GENERAL PURPOSE CABLE GLAND Red RAL 01 - R, White RAL W, Grey RAL G, Back RAL B Poyamide 6.6 with Nitrie Rubber Sea Exampe THREAD LENGTH (mm) CABLE DIAMETER MAX (mm) CABLE DIAMETER MIN (mm) GLAND DEPTH (mm) GLAND DIAMETER (mm) ACROSS FLATS DIMENSION (mm) PACK QUANTITY SEALING WASHER LOCKNUT 248 M M M M M M M M M M M M M M M M M PG THREAD THREAD LENGTH (mm) CABLE DIAMETER MAX (mm) CABLE DIAMETER MIN (mm) GLAND DEPTH (mm) GLAND DIAMETER (mm) ACROSS FLATS DIMENSION (mm) 1585 PG LNPG PG LNPG PG LNPG PG LNPG PG LNPG PG LNPG PG LNPG PG LNPG PG LNPG PG LNPG21 PACK QUANTITY SEALING WASHER LOCKNUT With Twin Hoe Bush With Twin Hoe Bush & Cord Grip 248-T M X mm T M X mm T M X mm T M X mm T M X mm T M X mm T M X mm T M X mm T M X mm T M X mm T M X mm T M X mm IP Rating Haogen Free Famabiity Static Appications: -20 C to +90 C YES UL94 - V2 Key Features Idea for genera use. Protection. Metric and PG versions. Aso avaiabe in London Underground (LUL) approved materias for LSF/LFH appications. Approvas Appications Stations Locomotive Ekay's Standard Cabe gand gives good a-round performance and is the corner stone of Ekay's diverse cabe gand range. Cabe Gands can be suppied assembed with Locknuts and Seaing Washers as required. 7

74 Cabe Gands EURO INDEX, INDEX A2P, 90 SWEPT ELBOW, INDEX CLAW, FLAT CABLE & HEAT TRACE CABLE GLAND Materias PRODUCT CHARACTERISTICS Euro Index Cabe Gand NEW GENERATION OF INDUSTRIAL PART PLASTIC CABLE GLANDS. Red RAL 01 - R, White RAL W, Grey - G, Back RAL B, Dark Grey RAL DG Poyamide 6.6 with Nitrie Rubber Sea To order quote part no. & coour - e.g B Index A2P Cabe Gand HIGH PERFORMANCE UPTO 15bar CABLE GLANDS. Red RAL 01 - R, White RAL W, Grey - G, Back RAL B Poyamide 6.6 with Nitrie Rubber Sea Exampe IP Rating Haogen Free Famabiity THREAD THREAD LENGTH (mm) CABLE No. at 5bar Static Appications: -20 C to +90 C CABLE DIAMETER MAX (mm) CABLE DIAMETER MIN (mm) GLAND DEPTH (mm) GLAND DIAMETER (mm) ACROSS FLATS DIMENSION (mm) ESM12-10x M ESM16-11x M ESM20-12x M ESM20-1x M ESM25-14x M ESM2-15x M ESM40-16x M ESP07-10x Pg ESP09-11x Pg ESP11-12x Pg ESP1.5-12x Pg ESP16-1x Pg ESP21-14x Pg * 0.0* 100 ESP29-15x Pg ESP6-16x Pg * 50.0* 25 Note. Whoesaer Packs avaiabe on this range. Pack Qty 100 Gands & Locknuts. Add WP to Part No. when ordering YES UL94 - V2 PACK QUANTITY THREAD THREAD LENGTH (mm) CABLE DIAMETER MAX (mm) CABLE DIAMETER MIN (mm) GLAND DEPTH (mm) GLAND DIAMETER (mm) ACROSS FLATS DIMENSION (mm) M B M B M B M B M B M B M B M B M B Pg LNPG9-LG Pg LNPG11-LG Pg LNPG1.5-LG Pg LNPG16-LG Pg LNPG21-LG Pg LNPG29-LG 90 Swept Ebow Cabe Gand HIGH PERFORMANCE UPTO 15bar CABLE GLANDS. Red RAL 01 - R, White RAL W, Grey - G, Back RAL B Poyamide 6.6 with Nitrie Rubber Sea PACK QUANTITY SEALING WASHER LOCKNUT Approvas Appications Key Features Stations Locomotive New generation of industria pastic cabe gands. Smaer working enveope on bukhead or pane. Improved cabe seaing and retention. Wide cabe acceptance range for each gand size. Designed to EN 50262:1999. Integra caw design prevents cabe twisting during instaation. Mouded seaing ring increases seaing performance. Gands can be packaged and branded to customers specifications. Compies with internationa approvas. IP Rating Haogen Free Famabiity at 15bar Static Appications: -20 C to +90 C YES UL94 - V2 THREAD THREAD LENGTH (mm) CABLE DIAMETER MAX (mm) CABLE DIAMETER MIN (mm) GLAND DIAMETER (mm) ACROSS FLATS DIMENSION (mm) M B M B Key Features Appications PACK QUANTITY performance gands. Protection up to 15 Bar. Superior materia properties. Mutipe options for greater fexibiity. Stations Locomotive SEALING WASHER LOCKNUT 74

75 PRODUCT CHARACTERISTICS Materias Index Caw Cabe Gand HIGH PERFORMANCE CABLE GLAND Back RAL B Poyamide 6.6 with Nitrie Rubber Sea Exampe Materias THREAD LENGTH (mm) CABLE DIAMETER MAX (mm) CABLE DIAMETER MIN (mm) GLAND DEPTH (mm) GLAND DIAMETER (mm) ACROSS FLATS DIMENSION (mm) M M20s M M20b M20/ M Index Fat Cabe Gand HIGH PERFORMANCE FLAT CABLE CABLE GLAND Back RAL B Poyamide 6.6 with Nitrie Rubber Sea PACK QUANTITY SEALING WASHER LOCKNUT PG THREAD THREAD LENGTH (mm) CABLE DIAMETER MAX (mm) CABLE DIAMETER MIN (mm) GLAND DEPTH (mm) GLAND DIAMETER (mm) ACROSS FLATS DIMENSION (mm) Pg LNPG Pg LNPG Pg LNPG Pg1.5b LNPG Pg LNPG Pg LNPG21 Index Heat Trace Cabe Gand HIGH PERFORMANCE, HIGH TEMPERATURE UP TO +200 C CABLE GLAND Back RAL B Poyamide 6.6 with Nitrie Rubber Sea PACK QUANTITY SEALING WASHER LOCKNUT Exampe THREAD THREAD LENGTH (mm) CABLE DIAMETER A. MAX (mm) CABLE DIAMETER B. MAX (mm) CABLE DIAMETER A. MIN (mm) CABLE DIAMETER B. MIN (mm) M M M M Pg LNPG Pg LNPG Pg LNPG Pg LNPG Pg LNPG29 PACK QUANTITY SEALING WASHER LOCKNUT THREAD THREAD LENGTH (mm) CABLE DIAMETER A. MAX (mm) CABLE DIAMETER B. MAX (mm) CABLE DIAMETER A. MIN (mm) CABLE DIAMETER B. MIN (mm) M M M M Pg LNPG Pg LNPG Pg LNPG Pg LNPG Pg LNPG29 PACK QUANTITY SEALING WASHER LOCKNUT IP Rating Haogen Free at 5 bar Static Appications: -20 C to +90 C* * (+200 C for Heat Trace) YES Key Features Idea for Performance use. Protection at 5 bar. Metric and PG versions. For Cabe up to +200 C in heat trace appications. Famabiity Approvas Appications UL94 - V2 Stations Locomotive The Index Caw Gand is suitabe for many appications where cabes are subject to high tensie oads. Typica appications woud range from portabe equipment such as generators to highy mobie factory equipment. The performance of the Index Caw Gand aows for rating at 5 bar and cabe anchorage of 15.9kgs. 75

76 Cabe Gands EMC CABLE GLAND, MINIATURE & SURFACE MOUNT CABLE GLANDS PRODUCT CHARACTERISTICS Materias Index EMC Cabe Gand HIGH PERFORMANCE CABLE GLAND Back RAL B Nicke Pated Brass, Stainess Stee Spring, Santoprene Rubber Sea Exampe TYPE THREAD LENGTH (mm) CABLE DIAMETER MAX (mm) ACROSS FLATS DIMENSION (mm) M16 A M16 A M20 A M20 A M25 A M25 A M2 A M40 A M50 A M50 A CABLE DIAMETER MAX (mm) GLAND DIAMETER MIN (mm) SCREEN DIAMETER MAX (mm) SCREEN DIAMETER MIN (mm) PACK QUANTITY LOCKNUT TYPE A - Stripped Cabe Sheath. Aowing the outer sheath to be competey stripped from the cabe. TYPE B - Continuous Cabe Sheath. Aowing for a ring of outer sheath ony to be stripped Pg1.5 A Pg1.5 A Pg16 A Pg16 A Pg21 A Pg29 A Pg29 A Pg6 A Pg6 A Pg42 A TYPE A M16 B M20 B M25 B M25 B M25 B M2 A/B M40 B Pg1.5 B Pg16 B Pg21 B TYPE B IP Rating Haogen Free Famabiity Approvas Appications 76 at 10 bar Static Appications: -40 C to +15 C YES UL94 - V2 Stations Locomotive Key Features Screen continues into encosure. Protection at 10 bar. Metric and PG versions. For use with systems conforming to EN /2. The INDEX Uni Iris range of cabe gands are for use with screened cabe and have been designed to connect the screen of the cabe to the encosure screening system. This is achieved by the use of two tapered rings appying force onto a continuous stainess stee spring washer pressing against the screen, ensuring positive contact. Assemby is simpe, the screen is exposed, the spring and washers are sipped in pace and then the gand can be tightened.

77 PRODUCT CHARACTERISTICS To order quote part no. & coour - e.g. 28-B Materias Miniature Gand SMALL CABLE SIZE GLAND Back RAL B, White RAL W Poyamide 6.6 with Nitrie Rubber Sea Surface Mounted Cabe Gand FLAT SURFACE MOUNTING CABLE GLAND Back RAL B Poyamide 6.6 with Nitrie Rubber Sea Exampe THREAD LENGTH (mm) CABLE DIAMETER MAX (mm) CABLE DIAMETER MIN (mm) GLAND DEPTH (mm) GLAND DIAMETER (mm) ACROSS FLATS DIMENSION (mm) PACK QUANTITY SEALING WASHER LOCKNUT THREAD LENGTH (mm) CABLE DIAMETER MAX (mm) CABLE DIAMETER MIN (mm) GLAND DEPTH (mm) GLAND DIAMETER (mm) ACROSS FLATS DIMENSION (mm) PACK QUANTITY SEALING WASHER LOCKNUT 28 M M M M M M M M T - - Bore.5 x IP Rating Static Appications: -20 C to +90 C* * (+200 C for Heat Trace) Surface Mounted Cabe Gand Haogen Free Famabiity Approvas YES UL94 - V2 DESCRIPTION 275-T c/w Pain Bush 675-T c/w Cord Grip Bush Appications Stations Locomotive Key Features Miniature cabe gands are idea for sma cabe sizes and offer protection. They are avaiabe in Back (RAL 9005) or White (RAL 9010). Miniature cabe gands are avaiabe with either ong or short threads. Locknuts and seaing washers are avaiabe as separate items. Surface mounted cabe gands can be mounted to any fat surface using the two fixing hoes in the fange. 77

78 Cabe Gands CORD GRIP BRUSHES, PG - METRIC ADAPTORS & REDUCERS PRODUCT CHARACTERISTICS Materias Threaded Cord Grips Back RAL B Poyamide 6.6 Exampe THREAD THREAD LENGTH (mm) CABLE DIAMETER MAX (mm) CABLE DIAMETER MIN (mm) ACROSS FLATS DIMENSION (mm) 74-B M B 744-B M B 745-B M B GRIP DEPTH (mm) PACK QUANTITY SEALING WAHER LOCKNUT 746-B Pg LNPG9 747-B Pg LNPG B Pg LNPG16 Cabe Gand with Threaded Cord Grip THREAD THREAD LENGTH (mm) CABLE DIAMETER MAX (mm) CABLE DIAMETER MIN (mm) 648-B M B M B M B M B M B M B M B M THREAD THREAD LENGTH (mm) CABLE DIAMETER MAX (mm) CABLE DIAMETER MIN (mm) 656-B M B M B M B M B M B M B M B M PACK QUANTITY SEALING WAHER LOCKNUT IP Rating Haogen Free Famabiity Static Appications: -20 C to +90 C YES UL94 - V2 Approvas Appications Key Features Stations Locomotive Metric and Pg sizes avaiabe. Cabe gand version offers protection. 78

79 PRODUCT CHARACTERISTICS Materias PG - Metric Adaptors & Reducers EASY TO INSTALL ADAPTORS & REDUCERS TYPE A & B - Back RAL B, TYPE C - Grey RAL GR TYPE A & B - Poyamide 6.6. TYPE C - Poystyrene Exampe TYPE CABLE DIAMETER MIN (mm) MALE THREAD FEMALE THREAD PACK QUANTITY 464* A Metric - Metric Adaptor M1 M10* (mae) B Metric - Metric Adaptor M20 M B Metric - Metric Adaptor M25 M SEALING WASHER LOCKNUT TYPE 474 B Pg - Metric Adaptor Pg9 M LNPG9 475 B Pg - Metric Adaptor Pg11 M LHNPG B Pg - Metric Adaptor Pg1.5 M LNPG B Pg - Metric Adaptor Pg16 M LNPG B Pg - Metric Adaptor Pg1.5 M LNPG B Pg - Metric Adaptor Pg1.5 M LNPG1.5 Conduit Adaptor C Conduit Adaptor Pg16 Pg SUPPLIED C Conduit Adaptor Pg16 Pg SUPPLIED C Conduit Adaptor Pg21 Pg SUPPLIED C Conduit Adaptor Pg21 Pg SUPPLIED C Conduit Adaptor Pg16 M SUPPLIED C Conduit Adaptor Pg16 M SUPPLIED C Conduit Adaptor Pg21 M SUPPLIED C Conduit Adaptor Pg21 M SUPPLIED C Conduit Adaptor Pg21 M SUPPLIED A B C IP Rating Static Appications: -20 C to +90 C - A & B Static Appications: -10 C to +75 C - C Key Features Thread adaptors/reducers. Conduit adaptors. Easy to insta. Haogen Free YES Famabiity UL94 - V2 Approvas Appications Stations Locomotive 79

80 Cabe Gands STOPPING PLUGS & CABLE ACCESSORIES PRODUCT CHARACTERISTICS Materias Stopping Pugs Genera Use Stopping Pug Back RAL B, Grey - G Poyamide 6.6 Cord Grips METRIC CORD GRIPS Back RAL B, White - W See Tabe Beow Fex Protection Cabe Gand METRIC & PG SEALING WASHERS Back RAL B Poyamide 6.6 Exampe THREAD PLUG DIAMETER (mm) PLUG DEPTH (mm) HEAD DEPTH (mm) PACK QUANTITY THREAD GRIP DIAMETER MAX (mm) MATERIAL PACK QUANTITY THREAD CABLE DIAMETER MAX (mm) CABLE DIAMETER MIN (mm) PACK QUANTITY 64-B M B M B M B M G Pg G Pg G Pg M ABS M ABS M Aceta ** M Brass B M1 9.2 ABS B M ABS 1000 ** Brass Locknut M-16P-07 M M-16P-09 M M-20P-11 M M-20P-1 M Camping Sets Camping Bushes THREAD Camp Depth (mm) MATERIAL MATERIAL MATERIAL ACROSS FLATS DIMENSION (mm) PACK QUANTITY 0 M M M M M THREAD CABLE DIAMETER MAX (mm) CABLE DIAMETER MAX (mm) CABLE DIAMETER MIN (mm) ACROSS FLATS DIMENSION (mm) PACK QUANTITY 54-B M1* B M B M B M B M IP Rating IP Rating Static Appications: -10 C to +90 C Static Appications: -20 C to +90 C Haogen Free YES Haogen Free YES Famabiity UL94 - V2 Famabiity UL94 - V2 Approvas Approvas Appications Stations Locomotive Appications Stations Locomotive Key Features Idea for genera use. Metric and Pg versions. Key Features Idea for Genera Use. Metric version. 80 Adaptafex range of Stopping Pugs are idea for seaing cabe entries. Adaptafex offer a wide range of Locknuts and Seaing Washers incuding both Metric and Pg sizes manufactured in a range of coours and styes.

81 Termina Bocks TYPE 1512 & 4012 POLYAMIDE TERMINAL BLOCKS Materias PRODUCT CHARACTERISTICS mm 2 Poyamide Termina Bocks White Poyamide 6, Gavanised Brass Inserts & Gavanised Stee Screws mm 2 Poyamide Termina Bocks White Poyamide 6, Gavanised Brass Inserts & Gavanised Stee Screws Exampe Dimesions BASE WIRE PROTECTOR T INSERT No. POLES WIDTH A (mm) RATING PACK QUANTITY 1512LE LEVEL POLE 94 14A /151E RAISED YES - 12 POLE 94 14A LTE LEVEL - YES 12 POLE 94 14A TE RAISED - YES 12 POLE 94 14A 50 BASE WIRE PROTECTOR T INSERT 4012LE LEVEL POLE A /401E RAISED YES - 12 POLE A LT/402E LEVEL YES YES 12 POLE A TE RAISED - YES 12 POLE A 50 No. POLES WIDTH A (mm) HEIGHT B (mm) RATING PACK QUANTITY Nomina Camping Area 2.5mm 2 4mm 2 Nomina Votage Max Ambient Temp Fire Performance Famabiity 450V PA T85 Haogen Free UL94 - V2 450V PA T85 Haogen Free UL94 - V2 Approvas 81

82 Termina Bocks TYPE 6012, & POLYAMIDE & TYPE ELK POLYETHYLENE TERMINAL BLOCKS PRODUCT CHARACTERISTICS Materias mm 2 Poyamide Termina Bocks White Poyamide 6, Gavanised Brass Inserts & Gavanised Stee Screws mm 2 Poyamide Termina Bocks White Poyamide 6, Gavanised Brass Inserts & Gavanised Stee Screws Exampe Dimesions BASE WIRE PROTECTOR T INSERT 6012/601E RAISED YES - 12 POLE A TE RAISED - YES 12 POLE A L/601E LEVEL YES - 12 POLE A LE LEVEL POLE A 25 No. POLES WIDTH A (mm) HEIGHT B (mm) RATING PACK QUANTITY BASE WIRE PROTECTOR T INSERT 10012/1001 RAISED YES - 12 POLE A L LEVEL POLE A L/1001 LEVEL YES - 12 POLE A LT LEVEL POLE A T RAISED POLE A RAISED POLE A 10 No. POLES WIDTH A (mm) HEIGHT B (mm) RATING PACK QUANTITY Nomina Camping Area 6mm 2 10mm 2 Nomina Votage Max Ambient Temp Fire Performance Famabiity 450V PA T85 Haogen Free UL94 - V2 450V PA T85 Haogen Free UL94 - V2 Approvas 82

83 Materias PRODUCT CHARACTERISTICS mm 2 Poyamide Termina Bocks White Poyamide 6, Gavanised Brass Inserts & Gavanised Stee Screws ELK 2.5mm 2 Poyethyene Economy Range Termina Bocks White Poyethyene, Gavanised Brass Inserts & Pated Stee Screws Exampe Dimesions BASE WIRE PROTECTOR T INSERT RAISED POLE A LT LEVEL POLE A /1601 RAISED YES - 12 POLE A L/1601 LEVEL YES - 12 POLE A T RAISED POLE A L LEVEL POLE A 10 No. POLES WIDTH A (mm) HEIGHT B (mm) RATING PACK QUANTITY BASE MAX CSA T INSERT No. POLES NOMINAL VOLTAGE RATING PACK QUANTITY ELKA-12 LEVEL 4-12 POLE 80 A 10 ELK5A-12 LEVEL 6-12 POLE 80 5A 10 ELK15A-12 LEVEL POLE A 10 ELK0A-12 LEVEL POLE 400 0A 10 Nomina Camping Area 16mm 2 Nomina Camping Area 2.5mm 2 Nomina Votage 450V Nomina Working Temp 80 C Max Ambient Temp PA T85 Approvas Fire Performance Haogen Free Famabiity UL94 - V2 Approvas 8

84 Aquasafe Waterproof pug & connector Range Overview - In-Line ( - 16A) The in-ine range is typicay used where temporary connections are required for power. The range offers a variety of cabe acceptances sizes, whist maintaining a compact working enveope. The housings are defined as either Femae or Mae. The Femae housing has the coar mouding, and the Mae housing is smaer in diameter, and fits inside the opposite housing. The inner connectors are defined as either a Pug or Socket according to the meta inserts. Bukheads ( - 16A) If power is being distributed and controed from a fixed instaation, it may be more appropriate to mount products into an encosure or eectrica equipment. As an aternative to the in-ine connector, Adaptafex offer compimentary mounting options incuding; Chassis / pane mounting (screwed) Suppied with M25 Locknut and Seaing Washer as standard, the thread has fats to orientate the housing during instaation. Seaing Caps ( - 16A) Seaing caps can be fitted to each individua housing to maintain protection when the connectors are separated. This ensures eectrica safety at a times, even when the connectors are not in use. The caps are operated in exacty the same manner as the connectors, by the atch mechanism hed within the coar. A strap is aso provided to retain the seaing cap onto the housings, for ight static appications.. Switched Encosure Range (IP54-1A) Adaptafex now offers a NEW range of encosures to compement there AQUASAFE connection range. These encosures are deigned to meet the requirements in damp and exposed environments. System approvas avaiabe: IEC Bukhead / surface mounting (fanged) Fanged to suit surface mounting where space is restricted behind the appication. Each bukhead / pane mounted housing can be used in conjunction with the appropriate mating in-ine connector.pr 84

85 Aquasafe IN-LINE RANGE, BULKHEAD, SEALING CAPS & SWITCHED ENCLOSURE RANGE PRODUCT CHARACTERISTICS Materias In-Line Aqua-safe - 16A STANDARD IN_LINE PRODUCT Back Pug & Socket Connector: Poycarbonate. Outer Housing: Gass Fied Nyon with Nitrie Rubber Sea Exampe DESCRIPTION CONNECTOR DETAILS CABLE RANGE PACK QUANTITY In-Line Waterproof Connector Assemby Poe Pug & Socket 5-9mm In-Line Waterproof Connector Assemby Poe Pug & Socket 8-1mm In-Line Waterproof Connector Assemby Poe Pug & Socket 12-16mm OA1011-P00-1 In-Line Waterproof Femae Housing Poe Pug 5-9mm OA1021-P00-1 In-Line Waterproof Femae Housing Poe Pug 8-1mm OA101-P00-1 In-Line Waterproof Femae Housing Poe Pug 12-16mm A1011-S00-1 In-Line Waterproof Mae Housing Poe Socket 5-9mm A1021-S00-1 In-Line Waterproof Mae Housing Poe Socket 8-1mm A101-S00-1 In-Line Waterproof Mae Housing Poe Socket 12-16mm 1 Materias Bukhead Aqua-safe - 16A STANDARD BULKHEAD PRODUCT Back Pug & Socket Connector: Poycarbonate. Outer Housing: Gass Fied Nyon with Nitrie Rubber Sea Exampe BULKHEAD MALE SCREWED BULKHEAD FEMALE SCREWED BULKHEAD MALE FLANGED BULKHEAD FEMALE FLANGED DESCRIPTION CONNECTOR DETAILS CABLE RANGE PACK QUANTITY 185-0B1000-P00-1 Aqua-safe Bukhead Femae Housing Fanged Poe Pug E1000-P00-1 Aqua-safe Bukhead Femae Housing Screwed Poe Pug B1000-S00-1 Aqua-safe Bukhead Mae Housing Fanged Poe Socket E1000-S00-1 Aqua-safe Bukhead Mae Housing Screwed Poe Socket 1 IP Rating Haogen Free Famabiity Approvas upto 2 bar Static Appications: -25 C to +80 C YES UL94 - V2 IEC Appications Stations Locomotive 85

86 Aquasafe IN-LINE RANGE, BULKHEAD, SEALING CAPS & SWITCHED ENCLOSURE RANGE PRODUCT CHARACTERISTICS Seaing Caps - 16A SEALING CAPS Back Exampe FEMALE SEALING CAP MALE SEALING CAP DESCRIPTION Mae Seaing Cap with strap to suit a Femae Housings Femae Seaing Cap with strap to suit a Mae Housings 100 Switched Encosure Range IP54-1A ENCLOSURES Back Exampe DESCRIPTION ELK-2-SDB 2 Way Switched Weatherproof Encosure 1 ELK--SDB Way Switched Weatherproof Encosure 1 ELK-4-SDB 4 Way Switched Weatherproof Encosure 1 ELK-6-SDB 6 Way Switched Weatherproof Encosure 1 ELK--A-SDB Aquasafe Way Switch Weatherproof Encosure 1 IP Rating Haogen Free Famabiity Approvas IP54 Static Appications: -25 C to +80 C YES UL94 - V2 IEC Appications Stations Locomotive

87 NEW Energy Management Inteigent energy management at your fingertips The new, innovative and inteigent energyrange of products from Ekay. The energyrange incudes three different product categories - energysense, energystye and energyoutdoor which not ony give better contro of ighting, heating and other oad appications, but aso offer enhanced safety and security benefits. Offering unique features and increased functionaity to the highest design specifications, the new range is tested and certified to BS EN For ease of use, Ekay has designed a of its products to be easiy instaed, with a minimum of disruption to new or existing buids. The energyrange can, more importanty, be retrofit into existing commercia and domestic buidings, without the need for re-wiring. For a compete range of Energy Management Products just ask for our cataogue or vist During the deveopment of the innovative energyrange, Ekay has been granted, severa patents for new technoogies incuding the unique method of switching 16 Amp current regardess of oad type, a market first for time deay switches. With rising energy costs and increasing concerns about the environmenta impact of energy consumption there is a need to find and impement practica measures to save energy and imit carbon emissions. A of these issues are addressed by the energyrange. Whatever the instaation, the new energyrange from Ekay Eectrica provides a practica and styish way of saving energy in domestic or commercia buidings, without costing the earth. carboncac The new carboncac from Ekay is a simpe but highy effective way of cacuationg energy use and cost, both in terms of monetary cost and carbon emissions. Part No. C-CALC 87

88 Ekay Energy Management NEW PRODUCT CHARACTERISTICS Exampe Part No. 400A 50A-1 875A-1 50A-2 50A- Exampe Part No. 60A-1 60A-2 76A-1 76A- 74A-1 Part Nbr Product Famiy Finish Rating IP Rating Timimg Period 400A Coumbus Timer Energy Sense White 6A-240V - 10sec-10mins 50A-1 Push Button Timer 2 Wire Energy Sense White 16A-240V - 2mins-2hrs 875A-1 Push Button Timer Wire Energy Sense White 16A-240V - 2mins-2hrs 50A-2 Push Button Timer 2 Wire Energy Sense Chrome 16A-240V - 2mins-2hrs 50A- Push Button Save Unit Energy Sense White 16A-240V - 2mins-2hrs 60A-1 Touch Timer 2 Wire Energy Sense White 16A-240V - 2mins-2hrs 60A-2 Touch Timer 2 Wire Energy Sense Chrome 16A-240V - 2mins-2hrs 76A-1 PIR Timer 2 Wire Energy Sense White 16A-240V - 2mins-2hrs 76A- PIR Save Unit Energy Sense White 16A-240V - 2mins-2hrs 74A-1 Ceiing mounted PIR Energy Sense White 16A-240V - 2mins-2hrs Exampe Part No. 550A- 560A-1 560A- 570A- Exampe Part Nbr Product Famiy Finish Rating IP Rating Timimg Period 550A- Outdoor Push Button 2 Wire Energy Outdoor White 16A-240V 2mins-2hrs 560A-1 Outdoor Touch Wire Energy Outdoor White 16A-240V 2mins-2hrs 560A- Outdoor Touch 2 Wire Energy Outdoor White 16A-240V 2mins-2hrs 570A- Outdoor PIR 2 Wire Energy Outdoor White 16A-240V 2mins-2hrs Part No. 790A-1 790A- 750A-1 760A-1 770A-1 Part Nbr Product Famiy Finish Rating IP Rating Timimg Period 790A-1 Custom Light Energy Stye White 1.6A-240V - Variabe 790A- Custom Light Fush pate Energy Stye St/St 1.6A-240V - Variabe 750A-1 Push button timer 2 wire meta fush pate Energy Stye St/St 16A-240V - 2mins-2hrs 760A-1 Touch timer 2 wire meta fush pate Energy Stye St/St 16A-240V - 2mins-2hrs 770A-1 PIR timer 2 wire meta fush pate Energy Stye St/St 16A-240V - 2mins-2hrs 88

89 Fexibe Conduit Systems FOR CRITICAL POWER & DATA CABLE PROTECTION WE HAVE THE SOLUTION FOR ALL YOUR CABLE MANAGEMENT REQUIREMENTS 89

90 Index A TO Z LISTING Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page 71 P B P P LT/402E P P B P P TE P /1001 P B P P P L P B P P P LT P T-B P P P T P W P P P /151E P B P P P LE P B-WP P P P LTE P T-B P7 261-B P7 4020/0.5MS P TE P B P7 262-B P7 4021/0.5MS P P B-WP P7 26-B P7 4022/0.5MS P P W-WP P7 264-B P7 402/0.5MS P P B P7 265-B P7 4024/0.5MS P P P75 251B-WP P7 266-B P7 4025/0.5MS P P P75 251W-WP P7 266T-B P P P P B P7 267-B P P P P75 252B-WP P7 267T-B P P P P75 252W-WP P7 275-B P P P P B P7 275-T P P P P75 254B-WP P7 276-B P P P P75 254W-WP P7 277-B P P /1601 P P B P P P L P P B P P P L/1601 P P75 256T-B P P P LT P P B P P P T P P75 257T-B P P /F P A1011-P01-1 P P B P P79 46-B P A1011-S00-1 P P B P P B P A1021-P00-1 P P P P B P A101-P00-1 P P P P B P B1000-P00-1 P P P76 0-B P80 48-B P B1000-S00-1 P P P76 04-B P80 49-B P E1000-P00-1 P P P76 05-B P80 54-B P E1000-P01-1 P P P76 06-B P80 550A- P E1000-S00-1 P P P76 07-B P80 560A-1 P A1011-P00-1 P P P76 1-G P80 560A- P A1011-S00-1 P P P76 14-G P80 570A- P A1021-S00-1 P P P76 15-G P /601E P A101-S00-1 P P P76 50A-1 P L/601E P B1000-P00-1 P P P76 50A-2 P LE P B1000-S00-1 P P P76 50A- P TE P E1000-P00-1 P P P76 60A-1 P B P E1000-P02-1 P P P76 60A-2 P88 648T-B P E1000-S00-1 P P76 74A-1 P B P P P76 76A-1 P88 649T-B P P86 28-B P P76 76A- P88 64-B P P85 29-B P P76 875A-1 P B P P B P P76 400A P B P P B P P /401E P B P B P P LE P B P78 90

91 91 Index A TO Z LISTING 656T-B P7 657T-B P7 65-B P B P78 664T-B P7 665-B P78 666T-B P7 66-B P80 67-B P80 71 P B P80 74-B P B P B P B P B P B P78 750A-1 P B P P B P B P80 770A-1 P88 790A-1 P88 790A- P B P80 ACB10 ACB1 ACB1/ST ACB16 ACB16/ST ACB21 ACB21/ST ACB28 ACB28/ST ACB4 ACB4/ST ACB42 ACB42/ST ACB54 ACB54/ST ACG10 ACG1 ACG16 ACG21 ACG28 ACG4 ACG42 ACG54 ADAPTACUT P70 ADC106/CP/90 P2 ADC106/FL/90 P2 ADC106/FL/A P2 ADC80/CP/90 P2 ADC80/FL/90 P2 ADC80/FL/A P2 AL10/M12/A AL10/M12/C90 AL10/PF025/A AL10/PG7/A AL10/PG7/C90 AL10/PG9/A AL1/08/A AL1/08/C90 AL1/FL/C90 P19 AL1/M16/45 P18 AL1/M16/A AL1/M16/C90 AL1/M16/CS90 AL1/M16/CSF90 P21 AL1/M16/PPA P9 AL1/M16/S45 AL1/M16/SA AL1/M16/SF45 P21 AL1/M16/SFA P21 AL1/M20/A AL1/M20/A AL1/PF08/A AL1/PF08/C90 AL1/PG11/A AL1/PG1/A AL1/PG9/45 P18 AL1/PG9/A AL1/PG9/C90 AL1/PG9/CS90 AL1/PG9/CSF90 P21 AL1/PG9/S45 AL1/PG9/SA AL1/PG9/SF45 P21 AL1/PG9/SFA P21 AL1/U06/45/ AL1/U06/A/ AL1/U06/C90/ AL1/U075/45/ AL1/U075/A/ AL1/U075/C90/ AL1/U088/45/ AL1/U088/A/ AL1/U088/C90/ AL11010/Y P18 AL1-AL1/A/ P19 AL1RT AL16/08/A AL16/08/C90 AL16/050/A AL16/050/C90 AL16/FL/45 P19 AL16/FL/A P19 AL16/FL/C90 P19 AL16/KM20/A P18 AL16/M16/45 P18 AL16/M16/A AL16/M16/C90 AL16/M16/CS90 AL16/M16/CSF90 P21 AL16/M16/PPA P9 AL16/M16/S45 AL16/M16/SA AL16/M16/SF45 P21 AL16/M16/SFA P21 AL16/M20/45 P18 AL16/M20/A AL16/M20/C90 AL16/PF08/A AL16/PF08/C90 AL16/PF050/A AL16/PF050/C90 AL16/PG11/45 P18 AL16/PG11/A AL16/PG11/C90 AL16/PG11/CS90 AL16/PG11/CSF90 P21 AL16/PG11/S45 AL16/PG11/SA AL16/PG11/SF45 P21 AL16/PG11/SFA P21 AL16/PG1/45 P18 AL16/PG1/A AL16/PG1/C90 AL16/PG16/A AL16/PG9/A AL16/PG9/C90 AL16/U06/45/ AL16/U06/A/ AL16/U06/C90/ AL16/U075/45/ AL16/U075/A/ AL16/U075/C90/ AL16/U081/45/ AL16/U081/A/ AL16/U081/C90/ AL16/U088/45/ AL16/U088/A/ AL16/U088/C90/ AL16/U094/45/ AL16/U094/A/ AL16/U094/C90/ AL16/U100/45/ AL16/U100/A/ AL16/U100/C90/ AL16/U119/45/ AL16/U119/A/ AL16/U119/C90/ AL16/U11/45/ AL16/U11/A/ AL16/U11/C90/ AL1611/Y P18 AL16-AL16/A/ P19 AL16RT AL21/050/A AL21/FL/45 P19 AL21/FL/A P19 AL21/FL/C90 P19 AL21/KM20/A P18 AL21/M20/45 P18 AL21/M20/A AL21/M20/C90 AL21/M20/CS90 AL21/M20/CSF90 P21 AL21/M20/PPA P9 AL21/M20/S45 AL21/M20/SA AL21/M20/SF45 P21 AL21/M20/SFA P21 AL21/M25/A AL21/PF050/A AL21/PF050/C90 AL21/PG11/A AL21/PG1/45 P18 AL21/PG1/A AL21/PG1/C90 AL21/PG1/CS90 AL21/PG1/CSF90 P21 AL21/PG1/S45 AL21/PG1/SA AL21/PG1/SF45 P21 AL21/PG1/SFA P21 AL21/PG16/45 P18 AL21/PG16/A AL21/PG16/C90 AL21/PG16/CS90 AL21/PG16/CSF90 P21 AL21/PG16/S45 AL21/PG16/SA AL21/PG16/SF45 P21 AL21/PG16/SFA P21 AL21/U075/45/ AL21/U075/A/ AL21/U075/C90/ AL21/U088/45/ AL21/U088/A/ AL21/U088/C90/ AL21/U094/45/ AL21/U094/A/ AL21/U094/C90/ AL21/U100/45/ AL21/U100/A/ AL21/U100/C90/ AL21/U11/45/ AL21/U11/A/ AL21/U11/C90/ AL21/U119/45/ AL21/U119/A/ AL21/U119/C90/ AL21/U11/45/ AL21/U11/A/ AL21/U11/C90/ AL21/U18/45/ AL21/U18/A/ AL21/U18/C90/ AL21/U144/45/ AL21/U144/A/ AL21/U144/C90/ AL21/U175/45/ AL21/U175/A/ AL21/U175/C90/ AL211616/Y P18 AL21-AL21/A/ P19 AL21RT AL28/075/A AL28/075/C90 AL28/FL/45 P19 AL28/FL/A P19 AL28/FL/C90 P19 AL28/M25/45 P18 AL28/M25/A AL28/M25/C90 AL28/M25/CS90 AL28/M25/CSF90 P21 AL28/M25/PPA P9 Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page

92 92 Index A TO Z LISTING AL28/M25/S45 AL28/M25/SA AL28/M25/SF45 P21 AL28/M25/SFA P21 AL28/M2/A AL28/PF075/A AL28/PF075/C90 AL28/PG21/45 P18 AL28/PG21/A AL28/PG21/C90 AL28/PG21/CS90 AL28/PG21/CSF90 P21 AL28/PG21/S45 AL28/PG21/SA AL28/PG21/SF45 P21 AL28/PG21/SFA P21 AL28/U088/45/ AL28/U088/A/ AL28/U088/C90/ AL28/U094/45/ AL28/U094/A/ AL28/U094/C90/ AL28/U100/45/ AL28/U100/A/ AL28/U100/C90/ AL28/U119/45/ AL28/U119/A/ AL28/U119/C90/ AL28/U18/45/ AL28/U18/A/ AL28/U18/C90/ AL28/U144/45/ AL28/U144/A/ AL28/U144/C90/ AL28/U175/45/ AL28/U175/A/ AL28/U175/C90/ AL28/U200/45/ AL28/U200/A/ AL28/U200/C90/ AL28/U225/45/ AL28/U225/C90/ AL28/U245/A/ AL282121/Y P18 AL28-AL28/A/ P19 AL28RT AL4/100/A AL4/100/C90 AL4/FL/90 P19 AL4/M2/45 P18 AL4/M2/A AL4/M2/C90 AL4/M2/CS90 AL4/M2/CSF90 P21 AL4/M2/PPA P9 AL4/M2/S45 AL4/M2/SA AL4/M2/SF45 P21 AL4/M2/SFA P21 AL4/M40/A AL4/PF100/A AL4/PF100/C90 AL4/PG29/45 P18 AL4/PG29/A AL4/PG29/C90 AL4/PG29/CS90 AL4/PG29/CSF90 P21 AL4/PG29/S45 AL4/PG29/SA AL4/PG29/SF45 P21 AL4/PG29/SFA P21 AL4/U100/45/ AL4/U100/A/ AL4/U100/C90/ AL4/U119/45/ AL4/U119/A/ AL4/U119/C90/ AL4/U144/45/ AL4/U144/A/ AL4/U144/C90/ AL4/U175/45/ AL4/U175/A/ AL4/U175/C90/ AL4/U200/45/ AL4/U200/A/ AL4/U200/C90/ AL4-AL4/A/ P19 AL4RT AL42/125/A AL42/125/C90 AL42/FL/90 P19 AL42/M40/45 P18 AL42/M40/A AL42/M40/C90 AL42/M40/CS90 AL42/M40/CSF90 P21 AL42/M40/S45 AL42/M40/SA AL42/M40/SF45 P21 AL42/M40/SFA P21 AL42/M50/A AL42/PF125/A AL42/PF125/C90 AL42/PG6/45 P18 AL42/PG6/A AL42/PG6/C90 AL42/PG6/CS90 AL42/PG6/CSF90 P21 AL42/PG6/S45 AL42/PG6/SA AL42/PG6/SF45 P21 AL42/PG6/SFA P21 AL42/U175/45/ AL42/U175/A/ AL42/U175/C90/ AL42/U200/45/ AL42/U200/A/ AL42/U200/C90/ AL42-AL42/A/ P19 AL42RT AL54/150/A AL54/150/C90 AL54/200/C90 AL54/FL/45 P19 AL54/FL/45 P19 AL54/FL/90 P19 AL54/FL/90 P19 AL54/FL/A P19 AL54/FL/A P19 AL54/M50/45 P18 AL54/M50/45 P18 AL54/M50/A AL54/M50/A AL54/M50/C90 AL54/M50/C90 AL54/M50/CS90 AL54/M50/CS90 AL54/M50/CSF90 P21 AL54/M50/CSF90 P21 AL54/M50/S45 AL54/M50/S45 AL54/M50/SA AL54/M50/SA AL54/M50/SF45 P21 AL54/M50/SF45 P21 AL54/M50/SFA P21 AL54/M50/SFA P21 AL54/M6/45 P18 AL54/M6/45 P18 AL54/M6/A AL54/M6/A AL54/M6/C90 AL54/M6/C90 AL54/M6/CS90 AL54/M6/CS90 AL54/M6/S45 AL54/M6/S45 AL54/M6/SA AL54/M6/SA AL54/PF150/A AL54/PF150/A AL54/PF150/C90 AL54/PF200/A AL54/PF200/A AL54/PF200/C90 AL54/PG48/45 P18 AL54/PG48/45 P18 AL54/PG48/A AL54/PG48/C90 AL54/PG48/CS90 AL54/PG48/CSF90 P21 AL54/PG48/S45 AL54/PG48/SA AL54/PG48/SF45 P21 AL54/PG48/SFA P21 AL54-AL54/A/ P19 AL54RT ALD17/050/A P16 ALD17/050/A P16 ALD17/050/C90 P16 ALD17/050/C90 P16 ALD22/050/A P16 ALD22/050/A P16 ALD22/050/C90 P16 ALD22/050/C90 P16 ALD28/075/A P16 ALD28/075/A P16 ALD28/075/C90 P16 ALD28/075/C90 P16 ALD4/100/A P16 ALD4/100/A P16 ALD4/100/C90 P16 ALD4/100/C90 P16 ALD42/125/A P16 ALD42/125/A P16 ALD42/125/C90 P16 ALD42/125/C90 P16 ALRTSET ALS1/F P18 ALS16/F P18 ALS17/C P18 ALS21/F P18 ALS22/C P18 ALS28/C P18 ALS4/C P18 ALS42/C P18 ALS54/C P18 AR1/M16/A P6 AR1/M16/C90 P6 AR1/PG9/A P6 AR1X/T P6 AR16/M16/A P6 AR16/M16/C90 P6 AR16/M20/A P6 AR16/M20/C90 P6 AR16/PG11/A P6 AR16/PG1/A P6 AR16X/T P6 AR21/M20/A P6 AR21/M20/C90 P6 AR21/PG16/A P6 AR21X/T P6 AR28/M25/A P6 AR28/M25/C90 P6 AR28/PG21/A P6 AR28X/T P6 AR4/M2/A P6 AR4/M2/C90 P6 AR4/PG29/A P6 AR4X/T P6 AR42/M40/A P6 AR42/M40/C90 P6 AR42/PG6/A P6 AR54/M50/A P6 AR54/M50/C90 P6 AR54/PG48/A P6 ASC21/FL/C90 P4 ASC21/M20/A P4 ASC21/M20/C90 P4 ASC21/PG16/A P4 ASC21/PG16/C90 P4 ASC21X/T P5 ASC28/M25/A P4 ASC28/M25/C90 P4 ASC28/PG21/A P4 ASC28/PG21/C90 P4 ASC28X/T P5 ASC4/FL/90 P4 ASC4/M2/A P4 ASC4/M2/C90 P4 Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page

93 9 Index A TO Z LISTING ASC4/PG29/A P4 ASC4/PG29/C90 P4 ASC4X/T P5 ASC42/FL/90 P4 ASC42/M40/A P4 ASC42/M40/C90 P4 ASC42/PG6/A P4 ASC42/PG6/C90 P4 ASC54/FL/90 P4 ASC54/M50/A P4 ASC54/M50/C90 P4 ASC54/PG48/A P4 ASC54/PG48/C90 P4 ASF10/M16/A P4 ASF10/M16/C90 P4 ASF10/PG9/A P4 ASF10/PG9/C90 P4 ASF10X/T P5 ASF1/FL/C90 P4 ASF1/M16/A P4 ASF1/M16/C90 P4 ASF1/PG9/A P4 ASF1/PG9/C90 P4 ASF1X/T P5 ASF16/FL/C90 P4 ASF16/M16/A P4 ASF16/M16/C90 P4 ASF16/M20/A P4 ASF16/M20/A P4 ASF16/M20/C90 P4 ASF16/PG11/A P4 ASF16/PG11/C90 P4 ASF16/PG1/A P4 ASF16/PG1/C90 P4 ASF16X/T P5 ASF21/FL/C90 P4 ASF21/M20/A P4 ASF21/M20/C90 P4 ASF21/PG16/A P4 ASF21/PG16/A P4 ASF21/PG16/C90 P4 ASF21X/T P5 ASF28/FL/C90 P4 ASF28/M25/A P4 ASF28/M25/C90 P4 ASF28/PG21/A P4 ASF28/PG21/C90 P4 ASF28X/T P5 ASF4/FL/90 P4 ASF4/M2/A P4 ASF4/M2/C90 P4 ASF4/PG29/A P4 ASF4/PG29/C90 P4 ASF4X/T P5 AT1/08/45 P27 AT1/08/A P25 AT1/08/C90 P26 AT1/08/CSF90 P0 AT1/08/S45 P29 AT1/08/SA P28 AT1/08/SF45 P0 AT1/08/SFA P29 AT1/A/U P2 AT1/FL/C90 P AT1/M16/45 P27 AT1/M16/A P25 AT1/M16/C90 P26 AT1/M16/CSF90 P0 AT1/M16/S45 P29 AT1/M16/SA P28 AT1/M16/SF45 P0 AT1/M16/SFA P29 AT1/M20/A P25 AT1/PF08/45 P27 AT1/PF08/A P25 AT1/PF08/C90 P26 AT1/U06/CSF90 P1 AT1/U06/SF45 P2 AT1/U06/SFA P1 AT1/U075/CSF90 P1 AT1/U075/SF45 P2 AT1/U075/SFA P1 AT1/U088/CSF90 P1 AT1/U088/SF45 P2 AT1/U088/SFA P1 AT16/08/45 P27 AT16/08/A P25 AT16/08/C90 P26 AT16/08/CSF90 P0 AT16/08/S45 P29 AT16/08/SA P28 AT16/08/SF45 P0 AT16/08/SFA P29 AT16/050/45 P27 AT16/050/A P25 AT16/050/C90 P26 AT16/050/CSF90 P0 AT16/050/S45 P29 AT16/050/SA P28 AT16/050/SF45 P0 AT16/050/SFA P29 AT16/A/U P2 AT16/FL/45 P AT16/FL/C90 P AT16/M16/45 P27 AT16/M16/A P25 AT16/M16/C90 P26 AT16/M16/CSF90 P0 AT16/M16/S45 P29 AT16/M16/SA P28 AT16/M16/SF45 P0 AT16/M16/SFA P29 AT16/M20/45 P27 AT16/M20/A P25 AT16/M20/C90 P26 AT16/PF08/45 P27 AT16/PF08/A P25 AT16/PF08/C90 P26 AT16/PF050/45 P27 AT16/PF050/A P25 AT16/PF050/C90 P26 AT16/U06/CSF90 P1 AT16/U06/SF45 P2 AT16/U06/SFA P1 AT16/U075/CSF90 P1 AT16/U075/SF45 P2 AT16/U075/SFA P1 AT16/U081/CSF90 P1 AT16/U081/SF45 P2 AT16/U081/SFA P1 AT16/U088/CSF90 P1 AT16/U088/SF45 P2 AT16/U088/SFA P1 AT16/U094/CSF90 P1 AT16/U094/SF45 P2 AT16/U094/SFA P1 AT16/U100/CSF90 P1 AT16/U100/SF45 P2 AT16/U100/SFA P1 AT16/U119/CSF90 P1 AT16/U119/SF45 P2 AT16/U119/SFA P1 AT16/U11/CSF90 P1 AT16/U11/SF45 P2 AT16/U11/SFA P1 AT21/050/45 P27 AT21/050/A P25 AT21/050/C90 P26 AT21/A/U P2 AT21/FL/45 P AT21/FL/A P AT21/FL/C90 P AT21/M20/45 P27 AT21/M20/A P25 AT21/M20/C90 P26 AT21/M20/CSF90 P0 AT21/M20/S45 P29 AT21/M20/SA P28 AT21/M20/SF45 P0 AT21/M20/SFA P29 AT21/M25/A P25 AT21/PF050/45 P27 AT21/PF050/A P25 AT21/PF050/C90 P26 AT21/U075/CSF90 P1 AT21/U075/SF45 P2 AT21/U075/SFA P1 AT21/U088/CSF90 P1 AT21/U088/SF45 P2 AT21/U088/SFA P1 AT21/U094/CSF90 P1 AT21/U094/SF45 P2 AT21/U094/SFA P1 AT21/U100/CSF90 P1 AT21/U100/SF45 P2 AT21/U100/SFA P1 AT21/U11/CSF90 P1 AT21/U11/SF45 P2 AT21/U11/SFA P1 AT21/U119/CSF90 P1 AT21/U119/SF45 P2 AT21/U119/SFA P1 AT21/U11/CSF90 P1 AT21/U11/SF45 P2 AT21/U11/SFA P1 AT21/U18/CSF90 P1 AT21/U18/SF45 P2 AT21/U18/SFA P1 AT21/U144/CSF90 P1 AT21/U144/SF45 P2 AT21/U144/SFA P1 AT21/U175/CSF90 P1 AT21/U175/SF45 P2 AT21/U175/SFA P1 AT28/075/45 P27 AT28/075/A P25 AT28/075/C90 P26 AT28/075/CSF90 P0 AT28/075/S45 P29 AT28/075/SA P28 AT28/075/SF45 P0 AT28/075/SFA P29 AT28/A/U P2 AT28/FL/45 P AT28/FL/A P AT28/FL/C90 P AT28/M25/45 P27 AT28/M25/A P25 AT28/M25/C90 P26 AT28/M25/CSF90 P0 AT28/M25/S45 P29 AT28/M25/SA P28 AT28/M25/SF45 P0 AT28/M25/SFA P29 AT28/M2/A P25 AT28/PF075/45 P27 AT28/PF075/A P25 AT28/PF075/C90 P26 AT28/U088/CSF90 P1 AT28/U088/SF45 P2 AT28/U088/SFA P1 AT28/U094/CSF90 P1 AT28/U094/SF45 P2 AT28/U094/SFA P1 AT28/U100/CSF90 P1 AT28/U100/SF45 P2 AT28/U100/SFA P1 AT28/U119/CSF90 P1 AT28/U119/SF45 P2 AT28/U119/SFA P1 AT28/U18/CSF90 P1 AT28/U18/SF45 P2 AT28/U18/SFA P1 AT28/U144/CSF90 P1 AT28/U144/SF45 P2 AT28/U144/SFA P1 AT28/U175/CSF90 P1 AT28/U175/SF45 P2 AT28/U175/SFA P1 AT28/U200/CSF90 P1 AT28/U200/SF45 P2 AT28/U200/SFA P1 AT28/U245/CSF90 P1 AT28/U245/SF45 P2 AT28/U245/SFA P1 AT4/100/45 P27 AT4/100/A P25 AT4/100/C90 P26 AT4/100/CSF90 P0 AT4/100/S45 P29 Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page

94 94 Index A TO Z LISTING Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page AT4/100/SA P28 AT4/100/SF45 P0 AT4/100/SFA P29 AT4/A/U P2 AT4/M2/45 P27 AT4/M2/A P25 AT4/M2/C90 P26 AT4/M2/CSF90 P0 AT4/M2/S45 P29 AT4/M2/SA P28 AT4/M2/SF45 P0 AT4/M2/SFA P29 AT4/M40/A P25 AT4/PF100/45 P27 AT4/PF100/A P25 AT4/PF100/C90 P26 AT4/U100/CSF90 P1 AT4/U100/SF45 P2 AT4/U100/SFA P1 AT4/U119/CSF90 P1 AT4/U119/SF45 P2 AT4/U119/SFA P1 AT4/U144/CSF90 P1 AT4/U144/SF45 P2 AT4/U144/SFA P1 AT4/U175/CSF90 P1 AT4/U175/SF45 P2 AT4/U175/SFA P1 AT4/U200/CSF90 P1 AT4/U200/SF45 P2 AT4/U200/SFA P1 AT42/125/45 P27 AT42/125/A P25 AT42/125/C90 P26 AT42/125/CSF90 P0 AT42/125/S45 P29 AT42/125/SA P28 AT42/125/SF45 P0 AT42/125/SFA P29 AT42/A/U P2 AT42/M40/45 P27 AT42/M40/A P25 AT42/M40/C90 P26 AT42/M40/CSF90 P0 AT42/M40/S45 P29 AT42/M40/SA P28 AT42/M40/SF45 P0 AT42/M40/SFA P29 AT42/M50/A P25 AT42/PF125/45 P27 AT42/PF125/A P25 AT42/PF125/C90 P26 AT42/U175/CSF90 P1 AT42/U175/SF45 P2 AT42/U175/SFA P1 AT42/U200/CSF90 P1 AT42/U200/SF45 P2 AT42/U200/SFA P1 AT48/150/45 P27 AT48/150/A P25 AT48/150/C90 P26 AT48/150/CSF90 P0 AT48/150/S45 P29 AT48/150/SA P28 AT48/150/SF45 P0 AT48/150/SFA P29 AT48/A/U P2 AT48/M50/45 P27 AT48/M50/C90 P26 AT48/M50/CSF90 P0 AT48/M50/S45 P29 AT48/M50/SF45 P0 AT48/M50/SFA P29 AT48/PF150/45 P27 AT48/PF150/A P25 AT48/PF150/C90 P26 AT54/150/A P25 AT54/200/45 P27 AT54/200/C90 P26 AT54/200/CSF90 P0 AT54/200/S45 P29 AT54/200/SA P28 AT54/200/SF45 P0 AT54/200/SFA P29 AT54/A/U P2 AT54/FL/45 P AT54/FL/A P AT54/M50/A P25 AT54/M50/C90 P26 AT54/M50/CSF90 P0 AT54/M50/S45 P29 AT54/M50/SA P28 AT54/M50/SF45 P0 AT54/M6/45 P27 AT54/M6/A P25 AT54/M6/C90 P26 AT54/M6/CSF90 P0 AT54/M6/S45 P29 AT54/M6/SA P28 AT54/M6/SF45 P0 AT54/M6/SFA P29 AT54/PF200/45 P27 AT54/PF200/A P25 AT54/PF200/C90 P26 AWB1 P6 AWB16 P6 AWB21 P6 AWB28 P6 AWB4 P6 B/050/45 B/050/90 B/050-M16/TC B/050-M20/TC B/06U-M16/TC B/075/45 B/075/90 B/075U-M16/TC B/075U-M20/TC B/088U-M20/TC B/100/45 B/100/90 B/100U-M20/TC B/119U-M20/TC B/119U-M25/TC B/11U-M20/TC B/144U-M25/TC B/144U-M2/TC B/144U-PG21/TC B/M16/45 P57 & 62 B/M16/90 B/M16/C B/M16-M12/R B/M16-M20/E B/M16-PG11/TC B/M16-PG7/TC B/M16-PG9/TC B/M20/45 P57 & 62 B/M20/90 B/M20/C B/M20-050/TC B/M20-M12/R B/M20-M16/R B/M20-M25/E B/M20-PG11/TC B/M20-PG1/TC B/M20-PG16/TC B/M20-PG21/TC B/M20-PG7/TC B/M20-PG9/TC B/M25/45 P57 & 62 B/M25/90 B/M25/C B/M25-M20/R B/M25-M2/E B/M25-PG21/TC B/M2/45 P57 & 62 B/M2/90 B/M2/C B/M2-M25/R B/M2-PG29/TC B/M40/C B/M40-M2/R B/M50/C B/M50-M40/R B/M6/C B/M75/C B/PG11/45 B/PG11/90 B/PG11-050/TC B/PG11-M16/TC B/PG11-M20/TC B/PG11-PG1/E B/PG11-PG16/E B/PG11-PG7/R B/PG11-PG9/R B/PG1/45 B/PG1/90 B/PG1-M16/TC B/PG1-M20/TC B/PG1-PG11/R B/PG1-PG16/E B/PG1-PG21/E B/PG1-PG7/R B/PG1-PG9/R B/PG16/45 B/PG16/90 B/PG16-050/TC B/PG16-M16/TC B/PG16-M20/TC B/PG16-M25/TC B/PG16-PG11/R B/PG16-PG1/R B/PG16-PG21/E B/PG16-PG7/R B/PG16-PG9/R B/PG21/45 B/PG21/90 B/PG21-M16/TC B/PG21-M20/TC B/PG21-M25/TC B/PG21-M2/TC B/PG21-PG11/R B/PG21-PG1/R B/PG21-PG16/R B/PG21-PG29/E B/PG29-M20/TC B/PG29-M25/TC B/PG29-M2/TC B/PG29-M40/TC B/PG29-PG16/R B/PG29-PG21/R B/PG29-PG6/E B/PG6-M2/TC B/PG6-M40/TC B/PG6-PG21/R B/PG6-PG29/R B/PG6-PG42/E B/PG6-PG48/E B/PG42-PG29/R B/PG42-PG6/R B/PG42-PG48/E B/PG48-PG6/R B/PG48-PG42/R B/PG7-M16/TC B/PG7-M20/TC B/PG7-PG9/E B/PG9/90 B/PG9-M16/TC B/PG9-M20/TC B/PG9-PG11/E B/PG9-PG1/E B/PG9-PG7/R B100U-M25/TC C-CALC P88 CP-AF20A P64 CP-AF20A-BS-LFH P64 CP-AF20BS P64 CP-AF20BS-pp P64 CP-AF20BS-PP-INST P64 CP-AF20SP-BS P64 CP-AF25A P64 CP-AF25A-BS-LFH P64 CP-AF25BS P64 CP-AF25BS-PP P64 CPCM28/BL/50M P16 CPCM4/BL/50M P16 CPCM42/BL/25M P16 CPCM54/BL/25M P16 CPFM1/BL/50M P16 CPFM16/BL/50M P16

95 95 Index A TO Z LISTING Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page CPFM21/BL/50M P16 CP-KF20BS P64 CP-KF25BS P64 CUT-VICE P70 ECB1 ECB16 ECB21 ECB28 ECB4 ECB42 ECB54 ELK10A-12 P8 ELK15A-12 P8 ELK-2-SDB P86 ELK0A-12 P8 ELKA-12 P8 ELK--A-SDB P86 ELK--SDB P86 ELK-4-SDB P86 ELK5A-12 P8 ELK60A-12 P8 ELK-6-SDB P86 ESM12-10B ESM12-10B-LN ESM12-10G ESM12-10G-LN ESM12-10R ESM12-10R-LN ESM12-10W ESM12-10W-LN ESM16-11B ESM16-11B-LN ESM16-11B-WP ESM16-11G ESM16-11G-LN ESM16-11G-WP ESM16-11R ESM16-11R-LN ESM16-11R-WP ESM16-11W ESM16-11W-LN ESM16-11W-WP ESM20-12B ESM20-12B-LN ESM20-12B-WP ESM20-12G ESM20-12G-LN ESM20-12G-WP ESM20-12R ESM20-12R-LN ESM20-12R-WP ESM20-12W ESM20-12W-LN ESM20-12W-WP ESM20-1B ESM20-1B-LN ESM20-1B-WP ESM20-1G ESM20-1G-LN ESM20-1G-WP ESM20-1R ESM20-1R-LN ESM20-1R-WP ESM20-1W ESM20-1W-LN ESM20-1W-WP ESM25-14B ESM25-14B-LN ESM25-14B-WP ESM25-14G ESM25-14G-LN ESM25-14R ESM25-14R-LN ESM25-14W ESM25-14W-LN ESM25-14W-WP ESM2-15B ESM2-15B-LN ESM2-15B-WP ESM2-15G ESM2-15G-LN ESM2-15G-WP ESM2-15R ESM2-15R-LN ESM2-15R-WP ESM2-15W ESM2-15W-LN ESM2-15W-WP ESM40-16B ESM40-16B-LN ESM40-16G ESM40-16R ESM40-16R-LN ESM40-16W ESP07-10B ESP07-10G ESP07-10R ESP07-10W ESP09-11B ESP09-11G ESP09-11R ESP09-11W ESP11-12B ESP11-12G ESP11-12R ESP11-12W ESP1.5-12B ESP1.5-12G ESP1.5-12R ESP1.5-12W ESP16-1B ESP16-1G ESP16-1R ESP16-1W ESP21-14B ESP21-14G ESP21-14R ESP21-14W ESP29-15B ESP29-15G ESP29-15R ESP29-15W ESP6-16B ESP6-16G ESP6-16R ESP6-16W FK20 P42 FK25 P42 FK40 P42 GZ11 GZ1 GZ21 GZ29 GZ6 GZ9 KC16/M16/A P8 KC16/M16/C90 P8 KC16/M20/A P8 KC20/M20/A P8 KC20/M20/C90 P8 KC25/M25/A P8 KC2/M25/C90 P8 KC2/M2/A P8 KC40/M40/A P8 KC50/M50/A P8 KF16/M16/A P8 KF16/M20/A P8 KF20/M20/A P8 KF2020 P8 KF25/M25/A P8 KFL16 P7 KFL20 P7 KFL25 P7 KFM16 P7 KFM16/PAD P7 KFM20 P7 KFM20/PAD P7 KFM25 P7 KFM25/PAD P7 KFM2/PAD P7 KFM40/PAD P7 KFM50/PAD P7 KFS16 P7 KFS20 P7 KFS25 P7 KWIKCUT P70 KWIKCUT-BLADE P70 LFH-SP12 P52 LFH-SP16 P52 LFH-S P52 LFH-SP25 P52 LFH-SP2 P52 LFH-SP50 P52 LFH-SP52 P52 LFH-S P52 LFH-SP75 P52 LNB/M12 LNB/M16 LNB/M20 LNB/M25 LNB/M2 LNB/M40 LNB/M50 LNB/M6 LNB/M75 LNB/PG11 LNB/PG1 LNB/PG16 LNB/PG21 LNB/PG29 LNB/PG6 LNB/PG42 LNB/PG48 LNB/PG7 LNB/PG9 LNPB/M12 LNPB/M16 LNPB/M20 LNPB/M25 LNPB/M2 LNPB/M40 LNPB/M50 LNPB/M6 LNPB/PG11 LNPB/PG1 LNPB/PG16 LNPB/PG21 LNPB/PG29 LNPB/PG6 LNPB/PG42 LNPB/PG48 LNPB/PG7 LNPB/PG9 LNPG/M16 LNPG/M20 LNPG/M25 LNPG/M2 LNPG/M40 LNPG/M50 LNPG/M6 LNPG/PG11 LNPG/PG1 LNPG/PG16 LNPG/PG21 LNPG/PG29 LNPG/PG6 LNPG/PG42 LNPG/PG48 LNPG/PG7 LNPG/PG9 LNS/M16 LNS/M20 LNS/M25 LNS/M2 LNS/M40 LNS/M50 LNS/M6 LNS/M75 M-16P-07 P80 M-16P-09 P80 M-20P-11 P80 M-20P-1 P80 MB21 P42 MB4 P42 MB54 P42 P/M20-M16/R P/M25-M20/R P/PG11-M16/TC P/PG1-M16/TC P/PG16-M16/TC

96 96 Index A TO Z LISTING Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page P/PG16-M20/TC P/PG21-M25/TC P/PG9-M16/TC PACH21 P14 PACH28 P14 PACH4 P14 PACH42 P14 PACH54 P14 PACL28 P14 PACL28-S P14 PACL4 P14 PACL4-S P14 PACL42 P14 PACL42-S P14 PACL54 P14 PACL54-S P14 PACS20 P14 PACS25 P14 PACS28 P14 PACS28 P14 PACS4 P14 PACS54 P14 PADL17 P16 PADL22 P16 PADL28 P16 PADL4 P16 PADL42 P16 PAFH1 P14 PAFH1 P14 PAFH16 P14 PAFH16 P14 PAFL1 P14 PAFL1 P14 PAFL1-S P14 PAFL16 P14 PAFL16 P14 PAFL16-S P14 PAFL21 P14 PAFL21 P14 PAFL21-S P14 PAFS10 P14 PAFS1 P14 PAFS16 P14 PAFS18 P14 PAFS21 P14 PAFS21 P14 PAFS28 P14 PAFS4 P14 PBC28/M25/A P47 PBC28/M25/B P47 PBC28/PG21/B P47 PBC4/M2/A P47 PBC42/M40/A P47 PBC4/M2/B P47 PBC4/PG29/B P47 PBC42/M40/B P47 PBC42/PG6/B P47 PBC54/M50/B P47 PBC54/PG48/B P47 PBF16/M16/A P47 PBF16/M16/B P47 PBF16/PG11/B P47 PBF21/M20/A P47 PBF21/M20/B P47 PBF21/PG16/B P47 PCLIP/10 PCLIP/12 PCLIP/16 PCLIP/20 PCLIP/25 PCLIP/2 PCLIP/40 PCLIP/50 PCLIP/6 PCLIP/75 PICH17 P15 PICH21 P15 PICH22 P15 PICH28 P15 PICH4 P15 PICH42 P15 PICH54 P15 PICL28 P15 PICL4 P15 PICL42 P15 PICS28 P15 PICS4 P15 PICS42 P15 PICS54 P15 PICS80 P15 PIFH1 P15 PIFH16 P15 PIFL1 P15 PIFL16 P15 PIFL21 P15 PIFS10 P15 PIFS1 P15 PIFS16 P15 PIFS21 P15 PK1/M16/A P46 PK16/M16/A P46 PK21/M20/A P46 PK28/M25/A P46 PK4/M2/A P46 PKCS28 P46 PKCS4 P46 PKCSSS28 P46 PKCSSS4 P46 PKCSTC28 P46 PKCSTC4 P46 PKFS1 P46 PKFS16 P46 PKFS21 P46 PKFSSS1 P46 PKFSSS16 P46 PKFSSS21 P46 PKFSTC1 P46 PKFSTC16 P46 PKFSTC21 P46 PPFM1 P9 PPFM16 P9 PPFM21 P9 PPFM28 P9 PPFM4 P9 PRCS28 P16 PRCS4 P16 PRCS42 P16 PRCS54 P16 PRCSSS28 P47 PRCSSS4 P47 PRCSSS42 P47 PRCSTC28 P47 PRCSTC4 P47 PRCSTC42 P47 PRCSTC54 P47 PRFCS106 P16 PRFCS4 P16 PRFCS42 P16 PRFCS54 P16 PRFS1 P16 PRFS16 P16 PRFS21 P16 PRFS28 P16 PRFSSS16 P47 PRFSSS21 P47 PRFSTC16 P47 PRFSTC21 P47 PSA16/M12 PSA16/M18 PSA16/M0 PSA9/M12 RF12 P40 RF16 P40 RF20 P40 RF25 P40 RF2 P40 RF40 P40 RF50 P40 RK1-10 P5 RK16-10 P5 RK16-1 P5 RK21-10 P5 RK21-1 P5 RK21-16 P5 RK28-1 P5 RK28-16 P5 RK28-21 P5 RK4-21 P5 RK4-28 P5 ROTOCUT P70 ROTOCUT-BLADE P70 S10/25M P50 S10/50M P50 S10/9/C P51 S10/M12/A P50 S10/M12/B P51 S10/M12/B P51 S10/PG7/A P50 S10/PG7/B P51 S12 P50 S12/12/C P51 S12/M16/A P50 S12/M16/B P51 S12/PG9/A P50 S12/PG9/B P51 S16 P50 S16/16/C P51 S16/M16/A P50 S16/M16/B P51 S16/M20/A P50 S16/M20/B P51 S16/PG11/A P50 S16/PG11/B P51 S20 P50 S20/20/C P51 S20/M20/A P50 S20/M20/B P51 S20/M20/F P51 S20/PG16/A P50 S20/PG16/B P51 S25 P50 S25/25/C P51 S25/M25/A P50 S25/M25/B P51 S25/M25/F P51 S25/PG21/A P50 S25/PG21/B P51 S2 P50 S2/2/C P51 S2/M2/A P50 S2/M2/B P51 S2/M2/F P51 S2/PG29/A P50 S2/PG29/B P51 S40 P50 S40/40/C P51 S40/M40/A P50 S40/M40/B P51 S40/PG6/A P50 S40/PG6/B P51 S50 P50 S50/51/C P51 S50/M50/A P50 S50/M50/B P51 S50/PG42/A P50 S50/PG42/B P51 S6 P50 S6/61/C P51 S6/M6/A P50 S6/PG48/A P50 S75 P50 S75/75/C P51 S75/M75/A P50 SB10 P58 SB10/M12/B P59 SB10/PG7/B P59 SB12 P58 SB12/M16/A P59 SB12/M16/B P59 SB12/PG9/B P59 SB16 P58 SB16/M16/A P59 SB16/M16/B P59 SB16/PG11/B P59 SB20 P58 SB20/M20/A P59 SB20/M20/B P59 SB20/PG16/B P59 SB25 P58 SB25/M25/A P59

97 97 Index A TO Z LISTING Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page SB25/M25/B P59 SB25/PG21/B P59 SB2 P58 SB2/M2/A P59 SB2/M2/B P59 SB2/PG29/B P59 SB40 P58 SB40/M40/A P59 SB40/M40/B P59 SB40/PG6/B P59 SB50 P58 SB50/M50/A P59 SB50/M50/B P59 SB50/PG42/B P59 SB6 P58 SB6/M6/A P59 SB75 P58 SB75/M75/A P59 SK106 P2 SK80 P2 SN12 P52 SN16 P52 SN20 P52 SN25 P52 SN2 P52 SN40 P52 SN50 P52 SP06 P52 SP10 P52 SP10/9/C P54 SP10/M12/A P5 SP10/M12/B P5 SP10/PG7/A P5 SP10/PG7/B P5 SP12 P52 SP12/12/C P54 SP12/E P54 SP12/M16/A P5 SP12/M16/B P5 SP12/M16/M P54 SP12/PG9/A P5 SP12/PG9/B P5 SP12/PG9/M P54 SP16 P52 SP16/08/M P54 SP16/16/C P54 SP16/E P54 SP16/M16/A P5 SP16/M16/B P5 SP16/M16/C90 P5 SP16/M16/M P54 SP16/M20/A P5 SP16/M20/B P5 SP16/M20/C90 P5 SP16/M20/M P54 SP16/PG11/A P5 SP16/PG11/B P5 SP16/PG11/M P54 SP16/PG1/M P54 S P52 S/050/M P54 S/20/C P54 S/E P54 S/M20/A P5 S/M20/B P5 S/M20/C90 P5 S/M20/F P54 S/M20/M P54 S/PG16/A P5 S/PG16/B P5 S/PG16/M P54 SP25 P52 SP25/075/M P54 SP25/25/C P54 SP25/E P54 SP25/M25/A P5 SP25/M25/B P5 SP25/M25/C90 P5 SP25/M25/F P54 SP25/M25/M P54 SP25/PG21/A P5 SP25/PG21/B P5 SP25/PG21/M P54 SP2 P52 SP2/100/M P54 SP2/2/C P54 SP2/E P54 SP2/M2/A P5 SP2/M2/B P5 SP2/M2/C90 P5 SP2/M2/F P54 SP2/M2/M P54 SP2/PG29/A P5 SP2/PG29/B P5 SP2/PG29/M P54 SP40/40/C P54 SP40/E P54 SP40/M40/A P5 SP40/M40/B P5 SP40/M40/M P54 SP40/PG6/A P5 SP40/PG6/B P5 SP50 P52 SP50/51/C P54 SP50/E P54 SP50/M50/A P5 SP50/M50/B P5 SP50/M50/M P54 SP50/PG42/A P5 SP50/PG42/B P5 SP52 P52 S P52 S/61/C P54 S/M6/A P5 S/PG48/A P5 SP75 P52 SP75/75/C P54 SP75/M75/A P5 SPB10 P60 SPB10/M12/A P60 SPB10/M12/B P60 SPB10/PG7/B P60 SPB12 P60 SPB12/M16/A P60 SPB12/M16/B P60 SPB12/PG9/B P60 SPB16 P60 SPB16/M16/A P60 SPB16/M16/B P60 SPB16/PG11/B P60 SPB20 P60 SPB20/M20/A P60 SPB20/M20/B P60 SPB20/PG1/B P60 SPB20/PG16/B P60 SPB25 P60 SPB25/M25/A P60 SPB25/M25/B P60 SPB25/PG21/B P60 SPB2 P60 SPB2/M2/A P60 SPB2/M2/B P60 SPB2/PG29/B P60 SPB40 P60 SPB40/M40/A P60 SPB40/M40/B P60 SPB40/PG6/B P60 SPB50 P60 SPB50/M50/A P60 SPB50/M50/B P60 SPB50/PG42/B P60 SPL10 P55 SPL10/E P57 SPL10/M12/M P56 SPL10/PG7/M P56 SPL12 P55 SPL12/E P57 SPL12/M16/M P56 SPL12/PG9/M P56 SPL16 P55 SPL16/08/M P56 SPL16/E P57 SPL16/M16/A P56 SPL16/M16/B P56 SPL16/M16/C90 P57 SPL16/M16/M P56 SPL16/M20/A P56 SPL16/M20/B P56 SPL16/M20/C90 P57 SPL16/M20/M P56 SPL16/PG11/M P56 SPL16/PG1/M P56 SPL20 P55 SPL20/050/M P56 SPL20/E P57 SPL20/M20/A P56 SPL20/M20/B P56 SPL20/M20/C90 P57 SPL20/M20/M P56 SPL20/PG16/M P56 SPL25 P55 SPL25/075/M P56 SPL25/E P57 SPL25/M25/A P56 SPL25/M25/B P56 SPL25/M25/C90 P57 SPL25/M25/M P56 SPL25/PG21/M P56 SPL2 P55 SPL2/100/M P56 SPL2/E P57 SPL2/M2/A P56 SPL2/M2/B P56 SPL2/M2/C90 P57 SPL2/M2/M P56 SPL2/PG29/M P56 SPL40 P55 SPL40/125/M P56 SPL40/E P57 SPL40/M40/M P56 SPL40/PG6/M P56 SPL50 P55 SPL50/150/M P56 SPL50/E P57 SPL50/M50/M P56 SPL50/PG42/M P56 SPL6 P55 SPL6/E P57 SPL6/M6/M P56 SPL6/PG48/M P56 SPLB16/M16/A P49 SPLB16/M16/B P61 SPLB16/M20/A P61 SPLB16/M20/B P61 SPLB20/M20/A P61 SPLB20/M20/B P61 SPLB25/M25/A P61 SPLB25/M25/B P61 SPLB2/M2/A P61 SPLB2/M2/B P61 SPLB40/M40/A P61 SPLB50/M50/A P61 SPLHC10 P55 SPLHC12 P55 SPLHC16 P55 SPLHC20 P55 SPLHC25 P55 SPLHC2 P55 SPLHC40 P55 SPLHC50 P55 SPLHC6 P55 SPLHCB16/25m P61 SPLHCB20/25m P61 SPLHCB25/25m P61 SPLHCB2/25m P61 SPLHCB40/10m P61 SPLHCB50/10m P61 SPTC10 P60 SPTC12 P60 SPTC16 P60 SPTC20 P60 SPTC25 P60 SPTC2 P60 SPTC40 P60 SPTC50 P60 SPUL16 P55 SPUL20 P55 SPUL25 P55 SPUL2 P55 SPUL40 P55

98 98 Index A TO Z LISTING Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page SPUL50 P55 SPUL6 P55 SS0/20M P50 SS05/20M P50 SS08/10M P50 SS12/25M P50 SS16/25M P50 SS20/25M P50 SS25/25M P50 SS2/25M P50 SSB12 P58 SSB16 P58 SSB20 P58 SSB25 P58 SSB2 P58 SSBGS12 P58 SSBGS16 P58 SSBGS20 P58 SSBGS25 P58 SSBGS2 P58 STC10 P58 STC12 P58 STC16 P58 STC20 P58 STC25 P58 STC2 P58 STC40 P58 STC50 P58 SWINGCUT P70 SWINGCUT-BLADE P70 SWM12 SWM16 SWM20 SWM25 SWM2 SWM40 SWM50 SWM6 SWPG07 SWPG09 SWPG11 SWPG1 SWPG16 SWPG21 SWPG29 SWPG6 SWPG42 SWPG48 T101010/BL T101210/BL T10161/BL T111111/BL T11111/BL T11010/BL T1101/BL T11111/BL T1111/BL T1110/BL T1111/BL T111/BL T1161/BL T16101/BL T161016/BL T16111/BL T161116/BL T1611/BL T16116/BL T16161/BL T161616/BL T16211/BL T162116/BL T211016/BL T211021/BL T211116/BL T211121/BL T21116/BL T21121/BL T21161/BL T211616/BL T211621/BL T21211/BL T212116/BL T212121/BL T251025/BL T251125/BL T25121/BL T25125/BL T251821/BL T251825/BL T252121/BL T252125/BL T252521/BL T252525/BL T281021/BL T281028/BL T281121/BL T281128/BL T28121/BL T28125/BL T28128/BL T281621/BL T281625/BL T281628/BL T282121/BL T282125/BL T282128/BL T282525/BL T282528/BL T282828/BL T41625/BL T4164/BL T42125/BL T42128/BL T4214/BL T42525/BL T4254/BL T444/BL TPPS15 P71 TPPS22 P71 TPSC1515 P71 TPSC2222 P71 TPSS15 P71 TPSS21 P71 TPSS22 P71 TPSS27 P71 TPSS28 P71 TPST P71 XF12 P40 XF12/M16/D P40 XF16 P40 XF16/M16/C90 P40 XF16/M16/D P40 XF16/M20/D P40 XF20 P40 XF20/M20/C90 P40 XF20/M20/D P40 XF25 P40 XF25/M25/C90 P40 XF25/M25/D P40 XF2 P40 XF2/M2/C90 P40 XF2/M2/D P40 XF40/0M P40 XF40/M40/D P40 XF50 P40 XF50/M50/D P40 Y101010/BL Y10101/BL Y101210/BL Y111111/BL Y11010/BL Y11011/BL Y1110/BL Y1111/BL Y111/BL Y16101/BL Y161111/BL Y16110/BL Y16111/BL Y1611/BL Y161610/BL Y161611/BL Y16161/BL Y211010/BL Y21110/BL Y21111/BL Y2111/BL Y211610/BL Y21161/BL Y211616/BL Y212110/BL Y212111/BL Y21211/BL Y212116/BL Y25211/BL Y252116/BL Y252121/BL Y252510/BL Y252511/BL Y25251/BL Y252516/BL Y252521/BL Y252525/BL Y28211/BL Y282116/BL Y282121/BL Y28251/BL Y282516/BL Y282521/BL Y282525/BL Y282810/BL Y28281/BL Y282816/BL Y282821/BL Y282825/BL Y282828/BL Y42516/BL Y42521/BL Y42525/BL Y4254/BL Y4416/BL Y4421/BL Y4425/BL Y444/BL

99 Website Feature Information For the atest product & technica information on a the entire Adaptafex product range, visit our website n Entire searchabe product range (search by type, part no or appication) n Onine Marketing & Technica Areas (register to downoad PDF datasheets & DXF technica drawings) n Find your nearest distributor n Register to receive Adaptafex e-newsetter for the atest updates and product information n D CAD.stp fies of the NEW Adaptaok ATS range of fittings n Onine fitting videos Additiona Information For more detaied product information on Ekay & Kopex Products avaiabe from Adaptafex, pease contact us for any of the foowing product cataogues. n Ekay - Energy Management n Ekay - Termina Bocks n Kopex - PipeToos 99