to use the European Mark Licence No Date of issue: Wien, Rev. No. 15 Wien,
|
|
|
- Daniella Stafford
- 6 years ago
- Views:
Transcription
1 AUSTRIAN ELECTROTECHNICAL ASSOCIATION 1010 Wien, Eschenbachgasse 9 ZVR: DVR: Testing & Certification Kahlenberger Str. 2A 1190 Wien, Austria Phone: Fax: LICENCE to use the European Mark Licence No Date of issue: Wien, Rev. No. 15 The Austrian Electrotechnical Association (ÖVE) as signatory to the "Agreement on the use of a commonly agreed Mark of Conformity for certain electrical equipment complying with European Standards" hereby grants the right to the company mentioned below to label the products listed in the Annex with the ENEC-Mark. Licenceholder: TridonicAtco GmbH & Co KG Färbergasse Dornbirn Austria Product: Ballasts for discharge lamps, Series OGL... Basis for this given right is the conformity of the products with the requirements of the relevant European Standards as shown in the test report(s) Ref.-No(s). VAEE SFT1/SFT2, VAEE 27427A-G SFT1/SFT2, TGM-VAEE 27427H SFT1/SFT2, TGM-VAEE 27427j SFT1/SFT2 and the fulfilment of articles 8 and 9 of the ENEC-Agreement by the manufacturer. This licence refers to the tested specimen and to all products manufactured strictly identical to the submitted one. The product satisfies the provisions of the Low Voltage Directive 2006/95/EC. Österreichischer Verband für Elektrotechnik Head of Testing & Certification Dipl.-Ing. W. Martin OVE Testing & Certification Accredited by the Austrian Ministry of Economics and Labour as Certification Body for products and processes in the field of electrical and electronic engineering, including safety and EMC
2 Annex to Licence No Rev. 15 Page 1/7 Urkundeninhaber Licensee * Hersteller Manufacturer TridonicAtco GmbH & Co KG Färbergasse Dornbirn Austria Elektrokovina Predstikalne Naprave d.o.o. Trzaska c Maribor Slovenia TridonicAtco GmbH & Co KG Jahnstr Fürstenfeld Austria Tridonic.Atco (Malaysia) Sdn Bhd No. 1, Jalan Canggih 9, Taman Perindustrian Cemerlang Ulu Tiram, Johor Malaysia TridonicAtco Manufacturing Pty. Ltd. 130 Melrose Drive, Private Bag Tullamarine, Victoria Australia Erzeugnis Product Typenbezeichnung Type reference * Warenzeichen Trade Mark Ballasts for discharge lamps Series OGL..., OGLI..., OGLS..., OGLIS..., ABB Prüfbericht Test Report Nationale Bestimmung(en) National Standard(s) Europanorm(en) European Standard(s) VAEE SFT1/SFT2, VAEE 27427A-G SFT1/SFT2, TGM-VAEE 27427H SFT1/SFT2, TGM-VAEE 27427j SFT1/SFT2 ÖVE/ÖNORM EN : ÖVE/ÖNORM EN : ÖVE/ÖNORM EN A1: EN :2001 EN :2001 EN 60923:1996 EN 60923:1996/A1:2001 * Ersatz für Zertifikat Superseded licence Rev. 14 dated Items modified are marked with an asterisk (*)
3 Annex to Licence No Rev. 15 Page 2/7 Anmerkung(en) Remark(s) Double/reinforced insulated ballasts fulfill the additional requirements according to IEC (ed.1);am1 (34C/604/FDIS). High voltage impulse test according cl (see pages 5/7-7/7 of Annex). Nennspannung Rated voltage Nennstrom Rated current Lampenleistung Power of lamp Lampentyp(en) Lamp identification Max. Wicklungstemperatur tw Max. temp. of windings tw Temperaturerhöhung Temperature rise Beschreibung des Aufbaus Description of construction High-pressure discharge lamps 130 C Built-in ballast with windings made of copper enamelled wire alternative with tappings; iron core of dynamo sheet and winding-case of PA 6.6. Insulation material: Nomex or Polyester or PPS-film Optionally with automatic thermal cut-out. Types with double/reinforced insulation have multi layer insulation. Double/reinforced insulated types are thermally protected by thermal fuse (link). Please refer Type Code on page 4/7 of Annex for identification.
4 Annex to Licence No Rev. 15 Page 3/7 Bauteil Code Hersteller Typenbezeichnung Konformitätszeichen Component Code Manufacturer Type Reference Mark(s) of conformity Terminal B Electro Terminal EKL1 BE...PA ÖVE B Electro Terminal EKL2 BE...PA ÖVE B Electro Terminal 0 SKT II ÖVE B Electro Terminal KSSL 1M/2 2,5 mm² VDE B Electro Terminal EKL 2 VSG 6 mm² VDE B Electro Terminal VSSL ÖVE Thermal cut-out B Thermik S06... VDE B Thermik.06 VDE B Thermik C8 VDE B Microtherm T21... VDE Thermal fuse B Sung Woo SW-1 VDE (link) B Schäfer SF/E VDE A B C D The component is replaceable with another one, also certified, with equivalent characteristics. The component is replaceable if authorised by the test house. Integrated component tested together with the appliance. Alternative component.
5 Typecode for OG series ballasts Annex to Licence No Rev. 15 Page 4/7 O G = OG cross section Lamp family: L = Mercury vapour lamp L I = Metal halide lamp L S = High pressure sodium lamp L I S = Metal halide lamp or high pressure sodium lamp x x x x = Lamp wattage P = Ballast for TRIDONIC.ATCO impulser type ignitors: ZRM 2300 C201, ZRM 00 C201, ZRM 00 B101, ZRM 2300 powerpulse, ZRM 00 powerpulse, ZRM 00/0 powerpulse Temperature rise and losses x = 1-digit Code (A, B, C, E) Construction and connections: 0 = Basic insulation (SK1) and screw terminals 1 = Basic insulation (SK1) and spring grip terminals 2 = Reinforced insulation (SK2) and screw terminals 3 = Reinforced insulation (SK2) and spring grip terminals x x = 2-digit code (01-99) for free use by the manufacturer Protection device: D = Thermal cut-out, auto-reset type + thermal link K = No protection device W = Thermal cut-out, auto-reset type
6 Annex to Licence No Rev. 15 Page 5/7 Trademark/Typecode TRIDONIC.ATCO Insulation ABB Lamp Rated current High voltage impulse test (acc. cl. 11.2) 230 V 2 V 220/230 V 230/2 V 220/230/2 V 230/2/2 V 220/230/2/2 V 380/0/420 V Reinforced or basic basic basic [A] t (K) 1 OGL 2 C... OGL 2W 30 D 2/23 KS--B8 2W HM 2W HI 2,13 2,15 2 OGL 0 C... OGL 0W D 0/23 KS--B8 0W HM 3,25 3 OGL 0 C... OGL 0W 80 D 0/23 KS-B8 0W HM 5, OGL 1000 C... OGL 1000W 120 D 1000/23 KS-B8 1000W HM 7,5 0W HM 5,4 5 OGL 0/0 C... OGL 0/0W 80 0W HM 3,25 0W HI 3,5 6 OGLI 0 C... OGLI 0W DJ 0/24 KS-K-TP 0W HM 3,25 7 OGLI 0 PC 0W HI 3, OGLI 2000/10,3 C... OGLI 2000W W HI 10,3 na 9 OGLIS 1 C... OGLIS 1W 30 1W HI 1, W HS 1, * 10 OGLIS 2 C... 1 OGLIS 2W SOH/DJ 2/24 KS-K-TP 2W HI 3,0 2W HS 3,0 11 OGLIS 2 PC 2W HI 3,0 2W HS 3, OGLIS 2 E... 2W HI 3,0 2W HS 3,0
7 Annex to Licence No Rev. 15 Page 6/7 Trademark/Typecode TRIDONIC.ATCO Insulation ABB Lamp Rated current High voltage impulse test (acc. cl. 11.2) 230 V 2 V 220/230 V 230/2 V 220/230/2 V 230/2/2 V 220/230/2/2 V 380/0/420 V Reinforced or basic basic basic [A] t (K) 13 OGLIS 0 C... OGLIS 0W 80 * 14 OGLIS 1000 A... OGLIS 1000W 1 SOH/DJ 1000/23 KS-K-TP 15 OGLS 0 C... 1 OGLS 0W 60 SOH/DJ 0/23 KS-K-TP 16 OGLS 0 E OGLS 600 C... OGLS 600W 100 SOH 600/23 KS-K 18 OGLS 2/1 C... OGLS 2/1W OGLS 0/2 C... OGLS 0/2W OGLS 0 PC 0W HI 0W HI 0W HS 1000W HI 1000W HI 1000W HS 0W HI 0W HS 0W HI 0W HS 600W HS 600W HS 2W HS 1W HS 0W HS 2W HS 0W HI 0W HS 3,5 4,0-4,6 4,6 8,2 9,5 10,3 3,8-4,4 4,4-4,6 3,8-4,4 4,4-4,6 5,8 6,2 3,0 1,8 4,4-4,6 3,0 3,8-4,4 4,4-4, OGLSU 2W St% 2W HS 3,0 22 OGLSU 0W St% 0W HS 4,6
8 Charakteristics: All types alternative with automatic thermal cut out. Types with protective device D or W with marking 1 (please refer Type Code on page 4) Type OGLI 2000/10,3 C... alternative without dissipater, therefore without marking of temperature rise. Δt: na = not applicable, no details shown on the product. Annex to Licence No Rev. 15 Page 7/7 1 Double/reinforced insulated ballasts with -marking, according to IEC (ed.1);am1 (34C/604/FDIS). Identification: see Type Code on page 4. Double/reinforced insulated types are thermally protected (see Typecode on page 4).
to use the European Mark Licence No Date of issue: Wien, Rev. No. 02 Wien,
AUSTRIAN ELECTROTECHNICAL ASSOCIATION 00 Wien, Eschenbachgasse 9 ZVR: 27279890 DVR: 055887 Testing & Certification Kahlenberger Str. 2A 90 Wien, Austria Phone: +4 70 58 06 Fax: +4 70 58 06-99 LICENCE to
to use the European Mark Licence No Date of issue: Wien, Rev. No. 02 Wien,
AUSTRIAN ELECTROTECHNICAL ASSOCIATION 1010 Wien, Eschenbachgasse 9 ZVR: 327279890 VR: 1055887 Testing & Certification Kahlenberger Str. 2A 1190 Wien, Phone: +43 1 370 58 06 Fax: +43 1 370 58 06-199 LICENCE
LICENCE. to use the European Mark. Licence No Date of issue: Wien, Rev. No. 01 Wien,
OVE Austrian Electrotechnical Association Eschenbachgasse 9, 1010 Wien, Austria ZVR: 327279890 DVR: 1055887 www.ove.at OVE Testing & Certification Kahlenberger Str. 2A, 1190 Wien, Austria T +43 1 370 58
LICENCE. to use the European Mark
OVE Austrian Electrotechnical Association Eschenbachgasse 9, 1010 Wien, Austria ZVR: 327279890 DVR: 1055887 www.ove.at OVE Testing & Certification Kahlenberger Str. 2A, 1190 Wien, Austria T +43 1 370 58
LICENCE. to use the European Mark
OVE Austrian Electrotechnical Association Eschenbachgasse 9, 1010 Wien, Austria ZVR: 327279890 DVR: 1055887 www.ove.at OVE Testing & Certification Kahlenberger Str. 2A, 1190 Wien, Austria T +43 1 370 58
LICENCE. to use the European Mark. Licence No Date of issue: Wien,
OVE Austrian Electrotechnical Association 1010 Wien, Eschenbachgasse 9, Austria ZVR: 327279890 DVR: 1055887 www.ove.at OVE Testing & Certification 1190 Wien, Kahlenberger Str. 2A, Austria T +43 1 370 58
Page 1 of 6. Company: France. fuse links. listed in this. (ISO/IEC The manufacturing.
OVE Austrian Electrotechnical Association Eschenbachgasse 9, 10100 Wien, Austria ZVR: 327279890 DVR: 1055887 Kahlenberger Str. 2A, 1190 Wien, Austriaa T +43 1 370 58 06 F +43 1 370 58 06-199 www.ove.at
1. Electronic Superimposed Ignitors ZRM for Igniting Lamps W
CONTENTS 1. Electronic Superimposed Ignitors ZRM for Igniting Lamps 35-3500W 2. Power Switches ZRM for Energy Savings in Street Lighting 3. High Efficient Ballasts for HS, HI and HM Lamps - A2 4. A2 Class
TEST REPORT IEC Information technology equipment Safety Part 1: General requirements
Test Report issued under the responsibility of: TEST REPORT IEC 60950-1 Information technology equipment Safety Part 1: General requirements Report Number.... : 207809-CI3-3 CB DE1-9640/A2 Date of issue...
Constant wattage for high intensity discharge (HID) lamps
onstant wattage for high intensity discharge (HID) lamps Index page Introduction 143 onstant wattage control equipment 144 onstant wattage application 145 onstant wattage mercury vapour and metal halide
TEST REPORT IEC Information technology equipment Safety Part 1: General requirements
Test Report issued under the responsibility of: TEST REPORT IEC 60950-1 Information technology equipment Safety Part 1: General requirements Report Number.... : 221868-CI3-2 CB DE1-56824 Date of issue...
TEST REPORT IEC Plugs and socket-outlets for household and similar purposes Part 1: General requirements
Test Report issued under the responsibility of: TEST REPORT IEC 60884-1 Plugs and socket-outlets for household and similar purposes Part 1: General requirements Report Reference No.... : Date of issue...
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60923 Edition 3.1 2006-09 Edition 3:2005 consolidated with amendment 1:2006 Auxiliaries for lamps Ballasts for discharge lamps (excluding tubular fluorescent lamps) Performance
SGS Australia Pty Ltd
TEST REPORT AS/NZS 60598.2.2:2001 Luminaires Part 2: Particular requirements Recessed luminaires Report Reference No....: S08007 Approved by (+ signature)...: I Absolom Date of issue...: Thursday, 31 January
EU Mutual Recognition Technical Requirements
1. PRODUCT DESCRIPTION... 1 1.a General description of the product... 1 1.b Application limitations... 1 1.c Intended use... 2 1.d System context... 2 2. DESIGN EVALUATION... 2 2.a Engineering evaluation
SKN_N0106AnnexJ_R2. Annex J - Specific requirements for PVT collector Certification. 1. Introduction and definition
Annex J - Specific requirements for PVT collector Certification 1. Introduction and definition PVT collectors (named hybrid collectors in ISO 9806) generate heat and electric power at the same time. They
4.5. Ex Floodlights for high-pressure discharge lamps, series PX 04 and FLT 10. (Zone 1, 2, 21, 22)
.5 Ex Floodlights for high-pressure discharge lamps, series PX 0 and FLT 10 (Zone 1, 2, 21, 22) The powerful floodlights for harsh environments Thanks to the high degree of protection IP66, the robust
TEST REPORT IEC Information technology equipment Safety Part 1: General requirements
Test Report issued under the responsibility of: TEST REPORT IEC 60950-1 Information technology equipment Safety Part 1: General requirements Report Number.... : 1510050STO-001 Date of issue... : 26 October
Relcotech Transformer Manufacturer Sdn. Bhd. Flood Light. Description. Model: S MH70W S MH150W. Specification: Ingress Protection: IP65
tech Transformer Manufacturer Sdn. Bhd. Flood Light Model: S70150 - MH70W S70150 - MH150W Specification: Ingress Protection: IP65 Voltage: 220V ~ 240VAC 50Hz Lamp Wattage: 70W ~ 150W Holder Type: RX7s
VOLUNTARY CODE OF PRACTICE FOR ELECTROMAGNETIC COMPATIBILITY (EMC) OF MOTOR VEHICLES (13 October 2014)
FEDERAL CHAMBER OF AUTOMOTIVE INDUSTRIES VOLUNTARY CODE OF PRACTICE FOR ELECTROMAGNETIC COMPATIBILITY (EMC) OF MOTOR VEHICLES (13 October 2014) This code is prepared under the direction of the FCAl Board,
Certificate of Registration
Certificate of Registration PRODUCTION AND MANAGEMENT SYSTEM This is to certify that Company Name United Plantations Berhad Management Unit Name United International Enterprise Palm Oil Mill Company Address
TEST REPORT IEC Information technology equipment Safety Part 1: General requirements
Test Report issued under the responsibility of: TEST REPORT IEC 60950-1 Information technology equipment Safety Part 1: General requirements Report Number.... : 207809-CI3-2 CB DE1-49619/A2/B1/M2 Date
TABLE OF CONTENTS FOREWORD... 2 INTRODUCTION SCOPE NORMATIVE REFERENCES DEFINITIONS AND ABBREVIATIONS... 3
TITLE SPECIFICATION FOR MEDIUM VOLTAGE DATE: FEBRUARY 2015 PAGE: 1 OF 25 TABLE OF CONTENTS Page FOREWORD... 2 INTRODUCTION... 3 1 SCOPE... 3 2 NORMATIVE S... 3 3 DEFINITIONS AND ABBIATIONS... 3 4 REQUIREMENTS...
Resin Impregnated Paper Bushing, Oil to SF 6. , Type GSBK
1ZSC563-AAA en, Rev. 2 Resin Impregnated Paper Bushing, Oil to SF 6, Type GSBK Technical guide This Technical Guide has been produced to allow transformer manufacturers, and their designers and engineers,
Component Systems. for Lighting Applications. January 2018
Component Systems for Lighting Applications January 2018 Magnetic and Electronic Ballasts Ignitors Capacitors Electronic LVH Converters Emergency Lighting Modules Electronic Fluorescent Ballasts Lampholders
CORE VALUES TECHNOLOGIES ESS-ESD PRODUCT CATALOGUE Enjoy the peace of mind ENGINE POWER SUPPLIERS AND EQUIPMENT HEAT
TECHNOLOGIES ENGINE POWER SUPPLIERS AND EQUIPMENT HEAT Enjoy the peace of mind ESS-ESD PRODUCT CATALOGUE CORE VALUES PEACE OF MIND EFFICIENCY FAIRNESS RESPONSIBILITY CUSTOMER ORIENTATION GROWING DEVELOPED
Siovenski institut za kakovost in meroslovje Siovenian Institute of Quality and Metrology. Number. SI-ENEC 030/006 Ml. Product and type(s) / model(s)
51 Siovenski institut za kakovost in meroslovje Siovenian Institute of Quality and Metrology Number SI-ENEC 030/006 Ml Product and type(s) / model(s) A.C. supplied electronic ballasts for discharge lamps
E/ECE/324/Add.5/Rev.6/Amend.2 E/ECE/TRANS/505/Add.5/Rev.6/Amend.2
5 December 2017 Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles, Equipment and Parts which can be Fitted and/or be Used on Wheeled Vehicles and
VDE-registered oil-resistant PVC control cable with black outer sheath for a wide range of applications
VDE-registered oil-resistant PVC control cable with black outer sheath for a wide range of applications - PVC control cable, VDE registered, oil resistant, flexible and UV-resistant for various applications,
Proposal for amendments to Regulations Nos. 19, 48 and 98.
Submitted by the expert from Germany Informal document. GRE-68-15 (68th GRE, 26 29 March 2012, agenda item 5(i)) Proposal for amendments to Regulations Nos. 19, 48 and 98. Submitted by the expert from
4.7. Ex-Floodlights for high-pressure discharge lamps, series FZD 04 (Zone 1, 2, 21, 22)
.7 Ex-Floodlights for high-pressure discharge lamps, series FZD 0 (Zone 1, 2, 21, 22) The maintenance- and installation-friendly FZD 0 floodlights for harsh operating conditions Due to the spatial separation
31-SDMS-02 REV. 01 SPECIFICATIONS FOR
31-SDMS-02 REV. 01 SPECIFICATIONS FOR LOW VOLTAGE DISTRIBUTION PILLAR This specification is property of SEC and subject to change or modification without any notice C O N T E N T S S. NO. D E S C R I P
TEST REPORT IEC Information technology equipment Safety Part 1: General requirements
Test Report issued under the responsibility of: TEST REPORT IEC 60950-1 Information technology equipment Safety Part 1: General requirements Report Number.... : 1510053STO-001 Date of issue... : 2 November
4.6. Ex-Floodlights for high-pressure discharge lamps, series FZD 04 / FZD EN. (Zone 1, 2, 21, 22)
.6 Ex-Floodlights for high-pressure discharge lamps, series FZD 0 / FZD EN (Zone 1, 2, 21, 22) The maintenance- and installation-friendly FZD 0 floodlights for harsh operating conditions Due to the spatial
/ I S S : / S T S I
Agenda Electrical Transformers (Quality Control) Order Obtaining BIS Licence Requirements of Guidelines / IS 1180-1: 1: 2014 / STI Concerns in Getting BIS Licence Experience with BEE Regulations Recommendations
Emergency lighting units PC COMBO
TC-DD PC CFL E COMBO, 230 240 V 50/60 Hz Compact fluorescent lamps Product description Combination of electronic ballast and emergency lighting unit For TC-DD compact fluorescent lamps For manual testing
CERTIFICATE OF CONFORMITY
CERTIFICATE OF CONFORMITY This is to certify that Product Description, Purpose or Use Polyethylene (PE) pipes for pressure applications Certificate Holder ASA Plastics Pty Ltd Polyethylene (PE) Pipes Complies
The product and any acceptable variation thereto is specified in the Annex to this certificate and the documents therein referred to.
CERTIFICATE Issued to Applicant eldoled B.V. Luchthavenweg 8a 5657 EB Eindhoven, The Netherlands Product Trade name Types Manufacturer/Licensee eldoled B.V. Luchthavenweg 8a 5657 EB Eindhoven, The Netherlands
REFERENCE REV CP_TSSPEC_016 1 TITLE SPECIFICATION FOR DATE: NOVEMBER 2010 LIGHTING TABLE OF CONTENTS Page FOREWORD INTRODUCTION
TITLE SPECIFICATION FOR CONTACTORS FOR PUBLIC LIGHTING REFERENCE REV DATE: NOVEMBER 2010 PAGE: 1 OF 16 TABLE OF CONTENTS Page FOREWORD.. 2 INTRODUCTION 3 1 SCOPE...... 3 2 NORMATIVE REFERENCES...... 3
FL ballasts Electronic fixed output PC BASIC, 4 28 W PC BASIC
PC BASIC, 4 28 W PC BASIC Product description CELMA Energy Efficiency Index A2 / A3 Nominal life-time up to 50,000 h (at max. ta with a failure rate max. 0.2 % per 1,000 h) Large temperature range (for
UNIGLAS Tender Specifications
UNIGLAS Tender Specifications Special contractual conditions: Insulating glass elements The insulating glass elements used and integrated must be CE-certified, and insulating glass units in Germany must
Emergency lighting units PC COMBO
T5 PC, 220 240 V 50/60 Hz Linear fluorescent lamps Product description Combination of electronic ballast and emergency lighting unit For T5 fluorescent lamps Low-profile casing (21 x 30 mm cross-section)
Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-12095-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 2015-07-16 to 2019-03-06 Holder of certificate: Weidmüller
ANNEX MOTOR VEHICLES AND MOTOR VEHICLES' PARTS. Article 1. General Provisions
ANNEX MOTOR VEHICLES AND MOTOR VEHICLES' PARTS Article 1 General Provisions 1. This Annex shall apply to motor vehicles in UNECE vehicle regulations' category M1 as well as parts and equipment regulated
The product and any acceptable variation thereto is specified in the Annex to this certificate and the documents therein referred to.
CERTIFICATE Issued to Applicant ZF Friedrichshafen AG Electronic Systems Cherrystrasse 91275 Auerbach, Germany Products Trade name Types/models Manufacturer/Licensee ZF Friedrichshafen AG Electronic Systems
GE Ballast HID Electromagnetic nomenclature
Distributor Ballast Kits GE stocks a comprehensive inventory of quad and 5-tap HID voltage ballast kits. The kits contain the appropriate core and coil, capacitor, ignitor (where required), mounting bracket,
RLFE. Mounting bracket. Ex de. - Fast, easy installation - Suitable for discharge lamps of up to 400W - Robust and safe over time - Zones 1, 2, 21, 22
Ex de RLFE Mounting bracket - Fast, easy installation - Suitable for discharge lamps of up to 400W - Robust and safe over time - Zones 1, 2, 21, 22 Stainless steel guard Ex e terminal housing B.1 ED.2018
Luminaire for road and street lighting. Approved by / Authorized Signatory:
Test Report No.: Page 1 of 35 Issue Date: Manufacturer: Test item: Luminaire for road and street lighting Identification: Serial No: Receipt No.: Date of receipt: Testing laboratory and its address: Test
Evidence of Performance Airborne sound insulation of flat roofs
Evidence of Performance Test Report No. 15-002251-PR01 (PB X03-F01-04-en-01) Client Product Designation Knauf Insulation, D.O.O. Trata 32 4220 Skofja Loka Slovenia Flat roof as green roof Urbanscape Green
EEA AGREEMENT - ANNEX XIII p. 99 APPENDIX 2 { 1 }
9.2.2019 - EEA AGREEMENT - ANNEX XIII p. 99 APPENDIX 2 { 1 } DOCUMENTS SET OUT IN THE ANNEX TO REGULATION (EC) NO 1072/2009 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL, AS ADAPTED FOR THE PURPOSES OF
FL ballasts Electronic fixed output. PC BASIC sl, 4 28 W PC BASIC
T8 c PC BASIC sl, 4 28 W PC BASIC Product description CELMA Energy Efficiency Index A2 / A3 Nominal life-time up to 50,000 h (at max. ta with a failure rate max. 0.2 % per 1,000 h) Large temperature range
Amendment to Test Report
Test Report issued under the responsibility of www.nemko.com Amendment to Test Report This Amendment is valid only together with the main Test Report Report No.... : 277782 Main Report No.... : 261294
Amendment to Schedule 15 for Ballasts Electromagnetic & Electronic ballasts
Revision 1 Date: 28/01/2016 Amendment to Schedule 15 for Ballasts Electromagnetic & Electronic ballasts In the said schedule, (i) in paragraph 7, for sub-paragraph (i) the following shall be substituted,
Korea Eco-label Standards EL764 Revised 19. JUL Ministry of Environment Batteries EL764:2012
Korea Eco-label Standards EL764 Revised 19. JUL. 2012 Ministry of Environment Batteries EL764:2012 http://www.me.go.kr Publisher: Minister of Environment Publication: 02. SEP. 2005 Ministry of Environment
1ZSC AAA EN, REV. 7. Transformer bushings type GSBK Technical guide
1ZSC563-AAA EN, REV. 7 Transformer bushings type GSBK Technical guide Original instruction The information provided in this document is intended to be general and does not cover all possible applications.
IP65 FLUO 2X18W 2X36W
IP65 FLUO 2X18W 2X36W Features Housing made of reinforced polyester glass fiber (GRP) High transparent and impact resistant PC diffuser Both standard and emergency modes available Operation and survive
Operating Instructions
Operating Instructions Pendant Light Fitting > Contents 1 Contents 1 Contents...2 2 General Information...2 3 General Notes Regarding Safety...3 4 Intended Area of Application...4 5 Technical Data...5
DEPARTMENT OF TRADE AND INDUSTRY NO APRIL 2016
Trade and Industry, Department of/ Handel en Nywerheid, Departement van 438 National Regulator for Compulsory Specifications Act (5/2008): Amendments to the Compulsory Specification for Earth Leakage Protection
Understanding Electronic UltraMax HID Ballasts
Understanding Electronic UltraMax HID Ballasts GE offers a complete line of electronic ballasts for HID lighting systems. Electronic HID, like electronic fluorescent systems that preceded it, significantly
Cutler-Hammer Molded Case Circuit Breakers Amperes. January 2001 Vol. 1, Ref. No. [0477] G-Frame
![Cutler-Hammer Molded Case Circuit Breakers Amperes. January 2001 Vol. 1, Ref. No. [0477] G-Frame](/thumbs/89/98397840.jpg "Cutler-Hammer Molded Case Circuit Breakers Amperes. January 2001 Vol. 1, Ref. No. [0477] G-Frame")
Cutler-Hammer January 200 Vol., Ref. No. [077] s Molded Case s 5-00 Amperes 2- 2-2 Product Line Overview January 200 Vol., Ref. No. [068] 2 Product Line Description Cutler-Hammer Molded Case s are designed
Table of HS lamps. High-pressure sodium lamps (HS) 35 to 1000 W Lamp Power. Current Manufac. Designation Base
ELECTROMGNETIC BLLSTS ND CONTROL GER UNITS FOR HIGH-PRESSURE SODIUM (HS), METL- HLIDE (HI) ND HIGH-PRESSURE MERCURY (HM) VPOUR DISCHRGE LMPS Standard ballasts for HS and HI lamps 29 Control gear units
Vehicle Importer Terms and Agreement Form
Vehicle Importer Terms and Agreement Form This document outlines the Terms applicable to an Electric Vehicle Importer (the Importer ) wishing to participate in SEAI s Electric Vehicle Grant Scheme (the
Official Journal of the European Union. (Non-legislative acts) REGULATIONS
10.1.2019 L 8 I/1 II (Non-legislative acts) REGULATIONS REGULATION (EU) 2019/26 OF THE EUROPEAN PARLIAMT AND OF THE COUNCIL of 8 January 2019 complementing Union type-approval legislation with regard to
This standard covers the requirements of lighting chains. This standard covers only the safety requirements.
FOREWORD (Formal clause will be added later) This standard covers the requirements of lighting chains. This standard covers only the safety requirements. This standard (Part 5/Section 7) is one among the
VIETNAM NATIONAL STANDARDS AND LABELING REQUIREMENTS
VIETNAM NATIONAL STANDARDS AND LABELING REQUIREMENTS Bui Ngoc Bich Vietnam Standards and Quality Institute New Dehli, 4 October 2012 Legal framework MAIN CONTENT Energy label in Viet Nam Objects of Labeling
Cutler-Hammer. Molded Case Circuit Breakers Amperes. Product Selection January 2001 Vol. 1, Ref. No ) J-Frame
Vol. 1, Ref. No. 10499) Product Selection Table 12-56. Types 12-33 12-2 Product Line Overview Vol. 1, Ref. No. [0468] 12 Product Line Description Cutler-Hammer Molded Case Circuit Breakers are designed
THE NETHERLANDS (N E D E R L A N D) COMMUNICATION. Approval number: E4-23R Extension number: 00
Vehicle Technology Division THE NETHERLANDS (N E D E R L A N D) COMMUNICATION Concerning (1) : - approval granted - approval extended - approval refused - approval withdrawn - production definitely discontinued
2017/SOM3/SCSC/JRAC/010 Agenda Item: 6a
2017/SOM3/SCSC/JRAC/010 Agenda Item: 6a Mutual Recognition Arrangement on Conformity Assessment of Electrical and Electronic Equipment - APEC EEMRA Information Interchange Format Part 1 Thailand Purpose:
7 Lighting Technology
7 Lighting Technology Pendant Light Fitting IEC 10560E00 For use in Zone 2 Zone 21 and Zone 22 Three sizes are available size 1 up to 150 W size 2 up to 250 W size 3 up to 600 W Available light sources
E/ECE/324/Rev.2/Add.102/Rev.1 E/ECE/TRANS/505/Rev.2/Add.102/Rev.1
30 August 2011 Agreement Concerning the adoption of uniform technical prescriptions for wheeled vehicles, equipment and parts which can be fitted and/or be used on wheeled vehicles and the conditions for
Solenoid System. The coil is also in conformity with 94/9/EC ATEX for electrical apparatus of group II, category 3 (Ex na II 3 GD T4 or T5).
EVI 7 S9 Solenoid System The EVI7 S9 system by AMISCO includes a wide range of solenoids, coils and operators, designed for pneumatic valves. All solenoids of this system have the guide tube with a diameter
ECOMP.3.A EUROPEAN UNION. Brussels, 12 December 2018 (OR. en) 2018/0220 (COD) PE-CONS 67/18 ENT 229 MI 914 ENV 837 AGRI 596 PREP-BXT 58 CODEC 2164
EUROPEAN UNION THE EUROPEAN PARLIAMT THE COUNCIL Brussels, 12 December 2018 (OR. en) 2018/0220 (COD) PE-CONS 67/18 T 229 MI 914 V 837 AGRI 596 PREP-BXT 58 CODEC 2164 LEGISLATIVE ACTS AND OTHER INSTRUMTS
STR-1415 SPECIFICATION FOR BATTERY CHARGERS 220V, 30A FOR SUBSTATIONS ANNEXURES B
STR-1415 SPECIFICATION FOR BATTERY CHARGERS 220V, 30A FOR SUBSTATIONS ANNEXURES B February 2017 STR-1415 SPECIFICATION FOR BATTERY CHARGERS 220V, 30A FOR SUBSTATIONS ANNEXURES B DRAFT FINAL DRAFT CONTRACT
Amperes. F-Frame. Price U.S. $ Catalog Number. Price U.S. $ EDH2100 EDH2125 EDH2150 EDH2175 EDH2200 EDH2225
January 1 Vol. 1, Ref. No. [0487] 2 Amperes - Product Selection Table -33. s,, and E Thermal-Magnetic Circuit Breakers with Non-interchangeable Trip Units Suitable for Reverse Feed Maximum Continuous Ampere
Evidence of performance Reduction of impact sound pressure level by floor coverings
Evidence of performance Reduction of impact sound pressure level by floor coverings Test report No. 14-003029-PR01 (PB X3.1-F03-04-en-01) Client Product Getzner Werkstoffe GmbH Herrenau 5 6706 Bürs Austria
Certificate of Appointment
Certificate of Appointment The National Standards Authority of Ireland, as the approval authority for Ireland to grant approvals for vehicles, technical units and components according to EC Directives
Table Type FD Thermal-Magnetic Circuit Breakers with Non-interchangeable Trip Units
-22 2 Amperes January 1 Vol. 1, Ref. No. [0488] Table -. FD Thermal-Magnetic Circuit Breakers with Non-interchangeable Trip Units Max. Cont. Ampere Rating @ 40 C 600V AC Maximum, 0V DC 277V AC Maximum,
COMMISSION REGULATION (EU) No /.. of XXX
EUROPEAN COMMISSION Brussels, XXX B4 1667206 [ ](2014) XXX DRAFT 30.04.2014 COMMISSION REGULATION (EU) No /.. of XXX supplementing Regulation (EC) No 661/2009 of the European Parliament and of the Council
Reg No: 1999/027771/07 ACCREDITED AND APPROVED TEST LABORATORY IN TERMS OF ARP 0108: REGULATORY REQUIREMENTS FOR EXPLOSION PROTECTED APPARATUS
Government Approved Test Laboratory (Previously AIA) Reg No: 1999/027771/07 Equipment: Manufacturer: Type: ACCREDITED AND APPROVED TEST LABORATORY IN TERMS OF ARP 0108: REGULATORY REQUIREMENTS FOR EXPLOSION
Guideline No.: E-07(201712) E-07 TRANSFORMERS. Issued date: December 26, China Classification Society
Guideline No.: E-07(201712) E-07 TRANSFORMERS Issued date: December 26, 2017 China Classification Society Foreword: This Guide is a part of CCS Rules, which contains technical requirements, inspection
for the use of SIQ Type Approved certification mark 51-SIQ BG 004/130 Project file: C DIN Rail Power Supply
SIA 'I Licence Number: Product: Type reference: Trademark: 51-SIQ BG 4/13 Project file: C216972 DIN Rail Power Supply DRM-24V48W1 PX(y); X: any alphanumeric character except Y and Z or blank; (y): any
USER MANUAL FOR EXPLOSION PROOF FLOODLIGHT tip RLF/
d.o.o. tel. 049 222 900 fax. 049 426 450 e-mail: tepex@tepex.hr www.tepex.hr USER MANUAL FOR EXPLOSION PROOF FLOODLIGHT tip RLF/ No: TEPEx.RS.028 Rev : 1 Date: 09.2014. SADRŽAJ 1. Manufacturer 1 2. General
E/ECE/324/Rev.2/Add.112/Rev.3/Amend.6 E/ECE/TRANS/505/Rev.2/Add.112/Rev.3/Amend.6
27 April 2018 Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles, Equipment and Parts which can be Fitted and/or be Used on Wheeled Vehicles and the
WELLGLASS EV.. Series - H.I.D. well glass lighting fixture. Aluminium with low content of copper. O-ring made of Nitrile Rubber (NBR)
WELLGLASS EV.. Series - H.I.D. well glass lighting fixture EV.. series well glass lighting fixtures are suitable for hazardous areas of industrial plants for lighting of indoor and outdoor structures,
AGREEMENT. (Revision 2, including the amendments entered into force on 16 October 1995) Addendum 102: Regulation No. 103
21 March 1997 AGREEMENT CONCERNING THE ADOPTION OF UNIFORM TECHNICAL PRESCRIPTIONS FOR WHEELED VEHICLES, EQUIPMENT AND PARTS WHICH CAN BE FITTED AND/OR BE USED ON WHEELED VEHICLES AND THE CONDITIONS FOR
MODULAR DEVICES. 21. Isolator Switches. Low Voltage (Bell) Transformers. Time Switches (electromechanical)
MODULAR DEVICES The range of two, three and four pole isolator switches are of a modular design and fit on DIN 50022 rail. Terminal capacity is 25mm 2. Isolator Switches Rating Poles Modules Reference
1ZSC AAA en, Rev. 6. Resin impregnated paper bushing, oil to SF 6., type GSBK Technical guide
1ZSC563-AAA en, Rev. 6 Resin impregnated paper bushing, oil to SF 6, type GSBK Technical guide Original instruction The information provided in this document is intended to be general and does not cover
THE NETHERLANDS (N E D E R L A N D) COMMUNICATION. Approval number: E4-112R Extension number: 00
Vehicle Technology Division THE NETHERLANDS (N E D E R L A N D) COMMUNICATION Concerning (1) - approval granted - approval extended - approval refused - approval withdrawn - production definitely discontinued
Ballasts For High Intensity Discharge Lamps
allasts For High Intensity Discharge Lamps Universal Means Higher Expectations In High Intensity Discharge Universal Lighting Technologies ( Universal ) offers a wide array of ballasts for High Intensity
Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules
BRITISH STANDARD BS EN 61347-2-13:2006 Lamp controlgear Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules The European Standard EN 61347-2-13:2006 has
DECLARATION OF PERFORMANCE DoP N EN
CONSTRUCTION PRODUCTS REGULATION (EU) 305/2011 DECLARATION OF PERFORMANCE DoP N 006-01-EN 1. Unique identification code of the product type: panic device according to DIN EN 1125:2008-04 1309-CPD-0194
ÖLFLEX CLASSIC 110 H Info Benefits
Halogen-free control cable, oil resistant and very flexible - halogen-free control cable, HFFR, oil-resistant, very flexible and cold-resistant down to -30 C for various applications, CPR Info CPR: Article
Lucalox Standard Tubular Clear Product Code * * 11678* LU150/100/ HO/T/E40 LU150 /100/40
GE Lighting Lucalox Standard High Pressure Sodium lamps Tubular Clear & Elliptical Diffuse 70W, 100W, 150W, 250W, 400W and 1000W DATA SHEET Product information From GE s invention of HPS lighting in 1965
Cutler-Hammer. January 2001
Vol. 12-2 Product Line Overview Vol. 1, Ref. No. [0468] 12 Product Line Description Cutler-Hammer Molded Case Circuit Breakers are designed to provide circuit protection for low voltage distribution systems.
Official Journal of the European Communities
1.11.2000 EN Official Journal of the European Communities L 279/33 DIRECTIVE 2000/55/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 18 September 2000 on energy efficiency requirements for ballasts
PRODUCT INFORMATION. ÖLFLEX HEAT 180 SiF
GmbH PRODUCT INFORMATION Versatile stranded conductors with extended temperature range Halogen-free Temperature-resistant Info Flexible fine-wire copper conductor Application range Areas with high ambient
RSDE10 / RSDE20 (Contrac) Electrical Linear Actuator
Contents Data Sheet Rev. A RSDE10 / RSDE20 (Contrac) Electrical Linear Actuator For continuous positioning, In explosion-proof design, Rated force 10 kn / 20 kn (2200 lbf / 4400 lbf) Electrical actuator
UK Weighing Federation Technical Articles
GLOSSARY The source of each definition is identified by the superscript number and listed out in full at the end of this glossary. Accuracy classification (1) classification as a Class I, Class II, Class
Überwachte Fertigungsstätte
Überwachte Fertigungsstätte Approved Place of Manufacture Solarwatt GmbH Maria-Reiche-Straße 2a 01109 Dresden Fertigungsstättennummer: Die Überwachung der Fertigungsstätte erfolgte nach dem europäischen
Lucalox Standard. GE Lighting. Product information. Applications areas
GE Lighting Lucalox Standard High Pressure Sodium lamps Tubular Clear & Elliptical Diffuse 70W, 100W, 150W, 250W, 400W and 1000W DATA SHEET Product information From GE s invention of HPS lighting in 1965