Überwachte Fertigungsstätte

Size: px

Start display at page:

Download "Überwachte Fertigungsstätte"

Alexandrina Park
5 years ago
Views:

1 Überwachte Fertigungsstätte Approved Place of Manufacture Solarwatt GmbH Maria-Reiche-Straße 2a Dresden Fertigungsstättennummer: Die Überwachung der Fertigungsstätte erfolgte nach dem europäischen Werksinspektions- Verfahren auf Basis der folgenden Schriftstücke: / This surveillance of the factory was performed according to the European Factory Inspection Procedure based on the following documents: ECS/CIG : 2014 Werksinspektionsverfahren, Harmonisierte Anforderungen / Factory Inspection Procedure - Harmonized Requirements Die Anforderungen wurden erfüllt. / The requirements have been fulfilled. Datum der letzten Inspektion: / Date of last inspection: Produkt-Kategorie: Siehe Anhang / Product Category: See Appendix Inspektionen, Konformitätsüberwachung, Intern. Service Inspection, Conformance, Intern. Service Thomas Bilz Datum / Date: Merianstrasse 28, Offenbach, Deutschland / Germany Telefon / Phone: , Telefax / Fax: / vde-institut@vde.com, Dieses Dokument ist nicht übertragbar auf andere Fertigungsstätten und berechtigt nicht zum Führen eines VDE-Zeichens. / This document is not transferable to other places of manufacture and does not authorize to use any VDE Mark. Q INSTITUT

2 Anhang zum Fertigungsstättendokument: Appendix to Factory Inspection document: Name und Sitz der Fertigungsstätte / Name and registered seat of the place of manufacture Solarwatt GmbH, Maria-Reiche-Straße, Dresden, Deutschland Datum / Date Seite / Page / 1 Dieses Blatt gilt nur in Verbindung mit Blatt 1 des Dokuments für die überwachte Fertigungsstätte./ This supplement is only valid in conjunction with page 1 of the document for the surveilled place of manufacture. Datum der letzten Inspektion: / Date of last inspection: Produkt-Kategorie: Terrestrische Photovoltaik-Module mit Silizium-Solarzellen Product Category: Crystalline silicon terrestrial photovoltaic modules A * Testing and Certification Institute Merianstrasse 28, D Offenbach Telefon +49 (0) Telefax +49 (0)

4 Name und Sitz der Fertigungsstätte / Name and registered seat of the place of manufacture SOLARWATT GmbH / Maria-Reiche-Str. 2a / Dresden / Germany Anhang zum Fertigungsstättenzertifikat Appendix to Factory Inspection Certificate Datum / Date Seite / Page Dieses Blatt gilt nur in Verbindung mit Blatt 1 des Zertifikats für die überwachte Fertigungsstätte./ This supplement is only valid in conjunction with page 1 of the certificate for the surveilled place of manufacture. Datum der letzten Inspektion / Date of last inspection: Produkt-Kategorie: Terrestrische kristalline Silizium-PV-Module Product Category: Crystalline silicone terrestrial PV-Modules Die zertifizierten Typen sind bitte der Liste im IEC61215 / IEC61730 Ausweis der Bauartprüfung Zert. Nr , und zu entnehmen. Kunde / Client: Solarwatt GmbH Typ(en) / type(s) Please see the type reference list in type approval document IEC61215 / IEC61730 certificate No , and Weitere Informationen siehe Anhang Seite 2 und 3 / further information see Appendix page 2 and 3.

5 VDE ID. No. License Holder Name Address Appendix to Factory Inspection Certificate Date Page SOLARWATT GmbH Maria-Reiche-Str. 2a / Dresden / Germany Product License No Crystalline silicone terrestrial PV-Modules Standard(s) IEC Ed.2, IEC Ed.1, IEC Ed.1 Type(s) According annex page 1 VDE Factory ID. No. Name Address SOLARWATT GmbH Maria-Reiche-Str. 2a / Dresden / Germany Process steps in factory* Yes No Cells stringing Assembly / Lamination / Framing Electrical tests / Classification Identification / Serial number a) Product identification code: Each module bears an individual serial number, containing: Digit 1) Place of manufacture (1 = SOLARWATT GmbH) Digit 2) Year of manufacture (letter A Z) Starting with A in The digit is increasing with year. A for year 2007 B for year 2008 E for year 2011 F for year 2012 Digit 3) to 10) serial number to Example for serial number: 1F C for year 2009 G for year 2013 D for year 2010 The Identification/Serial numbers listed above are recognized at VDE for Solarwatt Modules. Those are manufactured in the factory location(s) mentioned above in the European Union.. (*) The Easy-In module types are provided with factory mounted frame for Easy-In mounting system. The Easy-In System is rainproof according to the SOLARWATT GmbH mounting instructions and it is intended to replace structural roof elements. A COMPANY OF THE Q ASSOCIATION FOR ELECTRICAL, ELECTRONIC & INFORMATION TECHNOLOGIES A Managing Director Dipl.-Ing./Dipl.-Kfm. Wilfried Jäger Merianstrasse 28 D Offenbach Phone: +49 (0) Fax: +49 (0) vde-institut@vde.com Venue: Offenbach/Main HRB VAT-IDNo.: DE Tax No.: Make Payments to Commerzbank AG BLZ Account-No.: S.W.I.F.T.-Code: DRES DE FF XXX IBAN DE Notified Body according to the Equipment and Product Safety Act (GPSG) for technical work equipment and consumer products. Notified body according to the EMC Directive 2004/108/EG for Electromagnetic Compatibility (EMC). Accredited by DAR accreditation bodies according to DIN EN ISO/IEC 17020, 17021, and DIN EN Accredited by: IEC International Electrotechnical Commission IECEE/CB, IECQ and CENELEC European committee for Electrotechnical Standardization CCA, HAR, ENEC.

Appendix to Factory Inspection Certificate Date Page 2013-03-06 3 These factories are under continuous surveillance according to the Harmonized Factory Inspection Procedure.

6 Appendix to Factory Inspection Certificate Date Page These factories are under continuous surveillance according to the Harmonized Factory Inspection Procedure. Each Module is completely assembled in one of the factories, listed above. According to the certification procedures of the the movement of semifinished Modules between the factories is in general not permitted by VDE. Therefore the above mentioned module types, produced in this factory, are in compliance with the requirements of the TECHNICAL RULE AND GUIDELINE OF GSE 08/2012 and with the Handbook for the innovative applications aimed to the build integrated photovoltaic system 08/2012 ( Guida alle applicazioni innovative finalizzate all integrazione architettonica ) Renewables and Power Electronics (ET2) i. A. Roland Herbert Offenbach, A COMPANY OF THE Q ASSOCIATION FOR ELECTRICAL, ELECTRONIC & INFORMATION TECHNOLOGIES A Managing Director Dipl.-Ing./Dipl.-Kfm. Wilfried Jäger Merianstrasse 28 D Offenbach Phone: +49 (0) Fax: +49 (0) vde-institut@vde.com Venue: Offenbach/Main HRB VAT-IDNo.: DE Tax No.: Make Payments to Commerzbank AG BLZ Account-No.: S.W.I.F.T.-Code: DRES DE FF XXX IBAN DE Notified Body according to the Equipment and Product Safety Act (GPSG) for technical work equipment and consumer products. Notified body according to the EMC Directive 2004/108/EG for Electromagnetic Compatibility (EMC). Accredited by DAR accreditation bodies according to DIN EN ISO/IEC 17020, 17021, and DIN EN Accredited by: IEC International Electrotechnical Commission IECEE/CB, IECQ and CENELEC European committee for Electrotechnical Standardization CCA, HAR, ENEC.

VDE Prüf- und Zertifizierungsinstitut Zeichengenehmigung

VDE Prüf- und Zertifizierungsinstitut Zeichengenehmigung Ausweis-Nr. / Certificate No. 120831 Blatt / Page 2 Name und Sitz des Genehmigungs-Inhabers / Name and registered seat of the Certificate holder