Prüf-Nr./Q-Nr.: Certificate No.: Dienststelle: Department: Ort: PIace: Anlagen: Enclosures: rech. Daten: Specification: U = 500V, U" = 400V l"= 12 A

Transcription

1 SIEMENS Prüf-Nr./Q-Nr.: Certificate No.: Dienststelle: Department: Ort: PIace: Anlagen: Enclosures: 2267 a I la CE PRM CP SR 1 / Drutschmann Amberg ras: Date: Test Summary Pri,ibescheinigung I Tes-t - Mifræte Erzeugnis I Product: +'no:",3rk1301, ET200S Motor Starter, Standard 3RKlg03 ' rech. Daten: Specification: U = 500V, U" = 400V l"= 12 A Hersteller: SiemenS AG Manufacturer: I n CE Art der Prüfung I Type of test: Type TeSt e ut9r L TQ TL / Mr. prechfl-schöpf Tested by: Labor/ LOVAG registered and DAkkS accredited Laboratory: Testing Laboratory Siemens AG, Amberg Angewandte Prüfbestim m un gen / Iesf spe cif icatio n s ap pl ie d : IEC l: IEC l: Durchgeführte Prüfungen I Tests conducted: Test Sequences l,lll EMG lmmunity and Emission according to IEC Prüfergebnis / Iesf resu/fsr All requirements of the test specification are met. Bemerkungen I Remarks: lssued: lggg This Test Certificate covers ET200S Motor Starters, Standard Size S00, Direct on-line starters, Reversing starters and any accessories. lndex a, dated : Test report were replaced by test summary 2267a. Standard and product range updated. øçø SIEMENS AG I la CE CP PRM SR Mr. Hiereth IIACECPR Industry Sector S. Russwurm (Head) Siemens Aktiengesellschaft: Chairman of the Supervisory Board: Gerhard Cromme; Managing Board: Peter Loescher, Chairman, President and Chief Executive Officer; Wolfgang Dehen, Brigitte Ederer, Joe Kaeser, Barbara Kux, Hermann Requardt, Siegfried Russwurm, PeterY. Solmssen Registered offices: Berlin and Munich, Germany; Commercial reg stries: Berlin Charlottenburg, HRB 12300, Munich, HRB 6684 WEEE-Reg.-No. DE Formular: November 201 0

2 Test summary Manufacturer: Test device: Type: Siemens AG I IA CE Amberg Werner-von-Siemens-Str. 48, Amberg Motor starter 3RK , 3RK Test specification: IEC (2009/09) Test report No.: 09023TEI E BM-B01 Test report No.: 09023TEI04 Test-sequence and sub-clause IEC Test-sequence I and Test (2009/09) Verification of temperature-rise Verification of operation and operating limits Verification of dielectric properties Tested Device 3RK1301-1KBB0-0AA2 tested with 3RK1903-0AA00+ 3RK1903-0AB00+ 3RK1903-0AB10+ 3RK1903-0AE00+ 3RK1903-0AG01+ 3RK1903-0BA00+ 3RK1903-0CD00+ 3RK1903-0CE00+ 6ES7131-4BB01-0AA0+ 6ES7138-4CA01-0AA0+ 6ES7151-7AA20-0AB0+ 6ES7193-4CD20-0AA0 Test-sequence III Performance under short-circuit conditions 3RK1301-1KB00-0AA2 tested with 3RK1903-0AA00+ 3RK1903-0AB00+ 3RK1903-0BA00+ 6ES7131-4BB01-0AA0+ 6ES7138-4CA01-0AA0+ 6ES7151-7AA20-0AB0+ 6ES7193-4CA40-0AA0+ 6ES7193-4CD20-0AA0 For EMC tests see test report no.: from EMC test center Erlangen 09-E BM-B Immunity see EMC test reports Page 1 / 7

3 Test summary Test-sequence and sub-clause Test Tested Device For EMC tests see test report no.: from EMC test center Erlangen 09-E BM-B Emission see EMC test reports The tests were carried out on devices, representative for the whole series, fixed on page 3 and 4. The tests were carried out in the accredited laboratory: Prüflaboratorium der Siemens AG I IA CE Amberg Werner-von-Siemens-Str. 48, Amberg Accredited-No.: D-PL The EMC-Tests were carried out in the accredited laboratory: Siemens AG, EMV-Zentrum Erlangen Günther-Scharowsky-Str. 21, Erlangen Accredited-No.: DAT-P-252/98 Page 2 / 7

4 Nomenclature breakdown Series: 3RK13 3RK A B AA0 I II III IV V VI VII VIII IX I II Basic Type 3RK13, motor starter Type of interface 0 - Profibus-DP III Product type 1 - ET 200S motor starter IV Setting range 0A up to B up to 0.2 0C up to D up to E up to 0.4 0F up to 0.5 0G up to H up to 0.8 0J up to 1 0K up to A up to 1.6 1B up to 2 1C up to 2.5 1D up to 3.2 1E up to 4 1F up to 5 1G up to 6.3 1H up to 8 1J - 7 up to 10 1K - 9 up to 12 V Type of enclosure B - Open type VI Type of function 0 - Electromechanical starter VII VIII IX Version. - Manufacturer s identification Mode of operation 0 - Direct-on-line starter 1 - Reversing starter Model AA0 - Standard model AA1 - Standard model with interface for extension modules AA2 - Standard model with interface for extension modules and electronic inputs are provided. Page 3 / 7

5 Nomenclature breakdown Series: 3RK1903 3RK A A 00 I II III IV V I II Accessories Type 3RK1903 for ET 200S motor starters Accessory groups 0 - Accessories for motor starters 1 - Accessories for safety applications SIGUARD 2 - Accessories for power supply III Type of Accessories A - B - C - Terminal module Power module Special module IV Model Design A to J - Model design V Model 00 - Standard model 01 or 10 - Special model Page 4 / 7

6

7 Technical data Motor starter 3RK Test item particulars...: - kind of equipment...: AC motor starter - number of poles...: 3 - kind of current (a.c. or d.c.)...: ac - interrupting medium...: air - method of operation...: automatic - method of control...: manual / automatic - method of change-over for particular types of starters..: electro magnetic - method of connecting for particular types of starters...: load in delta, load in star -Rated and limiting values, main circuit: - rated operational voltage Ue (V)...: 400 V - rated stator operational voltage Ues (V)...: - - rated rotor operational voltage Uer (V)...: - - rated insulation voltage Ui (V)...: 500 V - rated stator insulation voltage Uis (V)...: - - rated rotor insulation voltage Uir (V)...: - - rated impulse withstand voltage Uimp(kV)...: 6 kv - rated starting voltage of an auto-transformer starter(v).: - - conventional free air thermal current Ith (A)...: Max. 12A - conventional enclosed thermal current Ithe (A)...: - conventional stator thermal current Iths (A)...: - conventional rotor thermal current Ithr (A)...: - rated operational current Ie (A) or rated operational powers...: Max. 12A - rated stator operational current Ies (A) or rated stator - operational powers...: - rated rotor operational current Ier (A)...: - - rated uninterrupted current Iu (A)...: - - rated frequency...: 50 / 60 Hz - rated duties...: - Short-circuit characteristic: - rated prospective short-circuit current "r" (ka)...: 400V / 1 ka - rated conditional short-circuit current Iq (ka)...: 400V / 50 ka Page 6 / 7

8 Technical data Rated and limiting values of relays and releases (overload relays) - types of relay or release...: a) release with shunt coil (shunt trip) b) under voltage and under current opening relay or release c) overload time-delay relay the time-lag of which is: 1) substantially independent of previous load (e.g. time-delay magnetic overload relay) 2) dependent on previous load (e.g. thermal or electronic overload relay) 3) dependent on previous load (e.g. thermal or electronic overload relay) and also sensitive to phase loss d) instantaneous over-current relay or release (e.g jam sensitive, see ) e) other relays or releases (e.g., control relay associated with devices for the thermal protection of the motor f) Stall relay or release - characteristic values a) release with shunt coil, under voltage (under current) opening relay or release.: - rated voltage (current)...: - - rated frequency...: - - operating voltage (current)...: - - operating time...: - - inhibit time...: - b) Overload relay: -designation and current settings...: -rated frequency, when necessary ( for example in case of a current transformer operated overload relay)...: - time-current characteristics (or range of characteristics), when necessary...: - trip class according to classification in table 2, or the value of maximum tripping time, in seconds, under the conditions specified in , table 2, column D, when this time exceeds 40 s....: - number of poles...: 3 Nature of the relay: thermal, magnetic, electronic without thermal memory...: 0,11 0,16A up to 9 12A 50/60Hz available cl. 10 thermal Page 7 / 7