SOUTH AFRICAN NATIONAL STANDARD
|
|
|
- Meghan Howard
- 5 years ago
- Views:
Transcription
1 Copying nd network storge prohibited. ISBN SANS :2016 Edition 1 nd IEC corr. 1 :2014 Edition 1 nd corr. 1 SOUTH AFRICAN NATIONAL STANDARD Electric motor-operted hnd-held tools, trnsportble tools nd lwn nd grden mchinery Sfety Prt 3-6: Prticulr requirements for trnsportble dimond drills with liquid This ntionl stndrd is the identicl implementtion of :2014 nd IEC corrigendum 1, nd is dopted with the permission of the Interntionl Electrotechnicl Commission. WARNING This document references other documents normtively. Published by SABS Stndrds Division 1 Dr Ltegn Rod Groenkloof Privte Bg X191 Pretori 0001 Tel: Fx: SABS
2 Copying nd network storge prohibited. SANS :2016 Edition 1 nd IEC corr. 1 :2014 Edition 1 nd corr. 1 Tble of chnges Chnge No. Dte Scope IEC corr Corrected to replce the tble on required performnce levels. Ntionl foreword This South Africn stndrd ws pproved by Ntionl Committee SABS/TC 072, Sfety of electricl pplinces nd electronic equipment, in ccordnce with procedures of the SABS Stndrds Division, in complince with nnex 3 of the WTO/TBT greement. This document ws pproved for publiction in August Complince with this document cnnot confer immunity from legl obligtions. SABS
3 :2014/COR1: IEC 2015 INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ÉLECTROTECHNIQUE INTERNATIONALE Edition Édition ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY SAFETY Prt 3-6: Prticulr requirements for trnsportble dimond drills with liquid OUTILS ELECTROPORTATIFS A MOTEUR, OUTILS PORTABLES ET MACHINES POUR JARDINS ET PELOUSES SECURITE Prtie 3-6: Exigences prticulières pour les forets dimntés trnsportbles vec système liquide CORRIGENDUM 1 Corrections to the French version pper fter the English text. Les corrections à l version frnçise sont données près le texte nglis. 18 Abnorml opertion Replce Tble 4 with the following: Tble 4 Required performnce levels Type nd purpose of SCF Power switch - prevent unwnted switch-on Power switch - provide desired switch-off Provide desired direction of rottion Any electronic control to pss the test of 18.3 Overspeed prevention to prevent output speed bove 130 % of rted (no-lod) speed Prevent exceeding therml limits s in Cluse 18 Limiting device to comply with Minimum Performnce Level (PL) b Not SCF c : /COR1: (en-fr)
4 This pge is intentionlly left blnk
5 Edition INTERNATIONAL STANDARD NORME INTERNATIONALE Electric motor-operted hnd-held tools, trnsportble tools nd lwn nd grden mchinery Sfety Prt 3-6: Prticulr requirements for trnsportble dimond drills with liquid Outils électroporttifs à moteur, outils portbles et mchines pour jrdins et pelouses Sécurité Prtie 3-6: Exigences prticulières pour les forets dimntés trnsportbles vec système liquide INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE PRICE CODE CODE PRIX Q ICS ISBN Wrning! Mke sure tht you obtined this publiction from n uthorized distributor. Attention! Veuillez vous ssurer que vous vez obtenu cette publiction vi un distributeur gréé. Registered trdemrk of the Interntionl Electrotechnicl Commission Mrque déposée de l Commission Electrotechnique Interntionle
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31092-9 IEC 62485-3:2014 SOUTH AFRICAN NATIONAL STANDARD Safety requirements for secondary batteries and battery installations Part 3: Traction batteries This national standard is the identical
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-2-3382-8 Edition 3.2 and IEC corr. 1 IEC 0309-1:2012 Edition.2 and corr. 1 SOUTH AFRICAN NATIONAL STANDARD Plugs, socket-outlets and couplers for industrial purposes This national standard is
Part 7-2: Test methods Single cell and stack performance tests for solid oxide fuel cells (SOFC)
ISBN 978-0-626-30629-8 IEC TS 62282-7-2:2014 SABS STANDARDS DIVISION Technical specification Fuel cell technologies Part 7-2: Test methods Single cell and stack performance tests for solid oxide fuel cells
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-33757-5 Edition 4.1 IEC 60269-2:2016 Edition 5.1 SOUTH AFRICAN NATIONAL STANDARD Low-voltage fuses Part 2: Supplementary requirements for fuses for use by authorised persons (fuses mainly
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-29978-1 IEC 60079-17:2013 SOUTH AFRICAN NATIONAL STANDARD Explosive atmospheres Part 17: Electrical installations inspection and maintenance This national standard is the identical implementation
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28543-2 Edition 2.1 and IEC corr. 1 IEC 62271-100:2012 Edition 2.1 and corr. 1 SOUTH AFRICAN NATIONAL STANDARD High-voltage switchgear and controlgear This national standard is the identical
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-33678-3 SANS 1239:2004 Any reference to SABS 1239 is deemed to be a reference to this standard (Government Notice No. 1373 of 8 November 2002) SOUTH AFRICAN NATIONAL STANDARD Plugs, socket-outlets
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32599-2 SOUTH AFRICAN NATIONAL STANDARD Electrical security installations Part 3: Electric fences (non-lethal) and manufacture requirements WARNING This document references other documents
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28761-0 SOUTH AFRICAN NATIONAL STANDARD Earthing of low-voltage (LV) distribution systems Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001
SOUTH AFRICAN NATIONAL STANDARD
ISBN 0-626-18502-5 SANS 60335-2-76:2006 IEC 60335-2-76:2006 SOUTH AFRICAN NATIONAL STANDARD Household and similar electrical appliances Safety Part 2-76: Particular requirements for electric fence energizers
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31203-9 SOUTH AFRICAN NATIONAL STANDARD Traffic lights WARNING This document references other documents normatively. Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31488-0 SOUTH AFRICAN NATIONAL STANDARD Switchgear Metal-enclosed ring main units for rated a.c. voltages above 1 kv and up to and including 36 kv WARNING This document references other
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-29010-8 SOUTH AFRICAN NATIONAL STANDARD Homologation of motor vehicle models Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27 12
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-34898-4 SOUTH AFRICAN NATIONAL STANDARD Motor vehicle tyres and rims Dimensions and loads Part 1: General WARNING This document references other documents normatively. Published by the South
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32159-8 Any reference to SABS 1551-1 is deemed to be a reference to this standard (Government Notice No. 1373 of 8 November 2002) SOUTH AFRICAN NATIONAL STANDARD Check valves (flanged and
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32581-7 SOUTH AFRICAN NATIONAL STANDARD Gravity drainage systems inside buildings Part 3: Roof drainage, layout and calculation This national standard is the identical implementation of,
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-33225-9 SOUTH AFRICAN NATIONAL STANDARD Automotive fuels Requirements and test methods for diesel WARNING This document references other documents normatively. Published by SABS Standards
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-30207-8 SOUTH AFRICAN NATIONAL STANDARD Chemicals used for treatment of water intended for human consumption Chlorine This national standard is the identical implementation of and is adopted
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31521-4 EN 300:2006 SOUTH AFRICAN NATIONAL STANDARD Oriented Strand Boards (OSB) Definitions, classification and specifications This national standard is the identical implementation of
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-21023-6 Any reference to SABS 0241 is deemed to be a reference to this standard (Government Notice No. 1373 of 8 November 2002) SOUTH AFRICAN NATIONAL STANDARD Tachograph centres Installation
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-22612-1 SANS 20013-H:2009 Edition 2 and ECE amdt 1 ECE R13-H:2008 Revision 1 and amdt 1 SOUTH AFRICAN NATIONAL STANDARD Uniform provisions concerning the approval of passenger cars with
SOUTH AFRICAN NATIONAL STANDARD
ICS 4304040 ISBN 0-626-17644-1 Any reference to SABS SV 1051-1 is deemed to be a reference to this standard (Government Notice No 1373 of 8 November 2002) SOUTH AFRICAN NATIONAL STANDARD Motor vehicle
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32948-8 SOUTH AFRICAN NATIONAL STANDARD Petroleum jelly (petrolatum) WARNING This document references other documents normatively. Published by SABS Standards Division 1 Dr Lategan Road
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-23806-3 SOUTH AFRICAN NATIONAL STANDARD The handling, storage, distribution and maintenance of liquefied petroleum gas in domestic, commercial and industrial installations Part 4: The transportation
SOUTH AFRICAN NATIONAL STANDARD
ICS 23.020.10; 75.200 ISBN 0-626-15187-2 SOUTH AFRICAN NATIONAL STANDARD Above-ground storage tanks for petroleum products Published by Standards South Africa 1 dr lategan road groenkloof! private bag
SOUTH AFRICAN NATIONAL STANDARD
ICS 43020 ISBN 0-626-17429-5 Edition 11 Any reference to SABS 0319 is deemed to be a reference to this standard (Government Notice No 1373 of 8 November 2002) SOUTH AFRICAN NATIONAL STANDARD The registration
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-26065-1 Edition 1 EN 12281:2002 Edition 2 SOUTH AFRICAN NATIONAL STANDARD Printing and business paper Requirements for copy paper for dry toner imaging processes This national standard is
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-29507-3 EN 413-1:2011 SOUTH AFRICAN NATIONAL STANDARD Masonry cement Part 1: Composition, specifications and conformity criteria This national standard is the identical implementation of
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-29808-1 SOUTH AFRICAN NATIONAL STANDARD Kerosene for domestic heating and illuminating WARNING This standard references other documents normatively. Published by SABS Standards Division
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28107-6 EN 1008:2002 SOUTH AFRICAN NATIONAL STANDARD Mixing water for concrete Specification for sampling, testing and assessing the suitability of water, including water recovered from
SOUTH AFRICAN NATIONAL STANDARD
ISBN 0-626-17643-3 SOUTH AFRICAN NATIONAL STANDARD Safety rules for the construction and installation of lifts Part 3: Lifts for persons with Amdt 3 disabilities (stairlifting platforms) Published by Standards
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 8535-1 Fifth edition 2011-12-01 Diesel engines Steel tubes for highpressure fuel injection pipes Part 1: Requirements for seamless cold-drawn single-wall tubes Moteurs diesels
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-23643-4 SOUTH AFRICAN NATIONAL STANDARD The testing of motor vehicles for roadworthiness WARNING This standard can only be used in conjunction with the relevant national legislation (see
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 3767-1 Third edition 1998-12-15 AMENDMENT 1 2008-11-15 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment s for operator controls and other displays
SOUTH AFRICAN NATIONAL STANDARD
ICS 83.080.20; 83.140.30 ISBN 0-626-14156-7 SANS 12107:2003 SOUTH AFRICAN NATIONAL STANDARD Plastics piping systems Injection-moulded thermoplastics fittings, valves and ancillary equipment Determination
SOUTH AFRICAN NATIONAL STANDARD. Plug and socket-outlet systems for household and similar purposes for use in South Africa
ISBN 978-0-626-27016-2 SANS 164-1:2012 SOUTH AFRICAN NATIONAL STANDARD Plug and socket-outlet systems for household and similar purposes for use in South Africa Part 1: Conventional system, 16 A 250 V
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-24538-2 SOUTH AFRICAN NATIONAL STANDARD Transport of dangerous goods Design, construction, testing, approval and maintenance of road vehicles and portable tanks WARNING: Can only be read
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28152-6 EN 197-1:2011 SOUTH AFRICAN NATIONAL STANDARD Cement Part 1: Composition, specifications and conformity criteria for common cements This national standard is the identical implementation
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-19459-8 SOUTH AFRICAN NATIONAL STANDARD Verification standards for the verification of volume-measuring instruments, including commercial standards of volume Published by Standards South
631 ALLOWANES AND TOLERANCES
631 ALLOWANES AND TOLERANCES ANSI Fits. Tbles 3 through 9 inclusive show series of stndrd types nd clsses of fits on unilterl hole bsis, such tht the fit produced by mting prts in ny one clss will produce
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-27311-8 SANS 1332:2013 Edition 1 SOUTH AFRICAN NATIONAL STANDARD Accessories for medium-voltage XLPE and impregnated paper-insulated power cables (3,8/6,6 kv to 19/33 kv) This national standard
DRAFT SOUTH AFRICAN STANDARD (DSS): PUBLIC ENQUIRY STAGE
Document number 022/SANS 1496 Reference SANS 1496 DRAFT SOUTH AFRICAN STANDARD (DSS): PUBLIC ENQUIRY STAGE Date of circulation 2017-09-14 Closing date 2017-11-15 Number and title: SANS 1496:XXXX Wheel
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60269-3 Second edition 1987-06 Low-voltage fuses Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications)
INTERNATIONAL STANDARD NORME INTERNATIONALE
INTERNATIONAL STANDARD NORME INTERNATIONALE IEC 61982 Edition 1.0 2012-04 Secondary batteries (except lithium) for the propulsion of electric road vehicles Performance and endurance tests Accumulateurs
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60906-1 First edition 1986-09 IEC System of plugs and socket-outlets for household and similar purposes Part 1: Plugs and socket-outlets 16 A 250 V a.c. This English-language
INTERNATIONAL STANDARD NORME INTERNATIONALE
INTERNATIONAL STANDARD NORME INTERNATIONALE IEC 62133 Edition 2.0 2012-12 colour inside Secondary cells and batteries containing alkaline or other non-acid electrolytes Safety requirements for portable
JUMO MIDAS C08. OEM Pressure Transmitter Basic. Applications. Brief description. Special features. Customer benefits
Mckenrodtstrße 4 609 Fuld, Allemgne 605 Fuld, Allemgne Tél. : +49 66 600-0 Fx. : +49 66 600-607 B.P. 4500 57075 Metz Cedex, Frnce Tél. : + 87 7 5 00 Fx. : + 87 7 89 00 Industriestrße 8 4700 Eupen, Belgique
JUMO MIDAS C18 SW. OEM seawater pressure transmitter. Applications. Brief description. Customer benefits. Special features. Approvals/approval marks
Pge /8 JUMO MIDAS C8 SW OEM sewter pressure trnsmitter Applictions wter tretment reverse osmosis, e.g. sewter deslintion plnts purifiction plnts orgnic cids, e.g. cetic cid solutions contining chloride,
ISO INTERNATIONAL STANDARD. Agricultural wheeled tractors and attachments Front loaders Carriages for attachments
INTERNATIONAL STANDARD ISO 23206 First edition 2005-06-01 Agricultural wheeled tractors and attachments Front loaders Carriages for attachments Tracteurs agricoles à roues et accessoires Chargeuses frontales
DRAFT TANZANIA STANDARD
EEDC 2 (4808) P3 IEC 60896-11:2002 G DRAFT TANZANIA STANDARD (Draft for stakeholders comments only) Stationary lead acid batteries- Part 11: Vented types- general requirements and methods of test TANZANIA
BS EN 485-2:2007 Ntionl foreword This British Stndrd ws published by BSI. It is the UK implementtion of EN 485-2:2007. It supersedes B
www.mintiluminu BRITISH STANDARD BS EN 485-2:2007 Aluminium nd luminium lloys Sheet, strip nd plte Prt 2: Mechnicl properties The Europen Stndrd EN 485-2:2007 hs the sttus of British Stndrd ICS 77.120.10
This document is a preview generated by EVS
CONSOLIDATED VERSION VERSION CONSOLIDÉE IEC 61558-2-16 Edition 1.1 2013-08 colour inside GROUP SAFETY PUBLICATION PUBLICATION GROUPÉE DE SÉCURITÉ Safety of transformers, reactors, power supply units and
This document is a preview generated by EVS
INTERNATIONAL STANDARD NORME INTERNATIONALE IEC 60269-2 Edition 5.0 2013-07 colour inside Low-voltage fuses Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for
This document is a preview generated by EVS
INTERNATIONAL STANDARD NORME INTERNATIONALE IEC 62128-1 Edition 2.0 2013-09 Railway applications Fixed installations Electrical safety, earthing and the return circuit Part 1: Protective provisions against
This document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 12405-3 First edition 2014-05-15 Electrically propelled road vehicles Test specification for lithium-ion traction battery packs and systems Part 3: Safety performance requirements
ISO 7612 INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 7612 Fourth edition 2009-10-15 Diesel engines Base-mounted in-line fuel injection pumps and high-pressure supply pumps for common rail fuel injection systems Mounting dimensions
Administrative Circular TO ALL NATIONAL COMMITTEES. Dear Sir/Madam, Co-operation and Licence Agreement between IEC and IEEE
Administrative Circular 138/AC 2002-12-13 TO ALL NATIONAL COMMITTEES Dear Sir/Madam, Co-operation and Licence Agreement between IEC and IEEE Further to document C/1257A/RV and the decision on Council Document
ISO 1185 INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 1185 Third edition 2003-10-15 Road vehicles Connectors for the electrical connection of towing and towed vehicles 7-pole connector type 24 N (normal) for vehicles with 24 V nominal
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60297-5-102 First edition 2001-01 Mechanical structures for electronic equipment Dimensions of mechanical structures of the 482,6 mm (19 in) series Part 5-102: Subracks and associated
INTERNATIONAL STANDARD NORME INTERNATIONALE
IEC 60034-12 INTERNATIONAL STANDARD NORME INTERNATIONALE Edition 2.1 2007-09 Rotating electrical machines Part 12: Starting performance of single-speed three-phase cage induction motors Machines électriques
INTERNATIONAL STANDARD NORME INTERNATIONALE
INTERNATIONAL STANDARD NORME INTERNATIONALE High-voltage switchgear and controlgear Part 100: Alternating-current circuit-breakers Appareillage à haute tension Partie 100: Disjoncteurs à courant alternatif
POWER TRIM. Table of Contents. Section 5D - Auto Trim II
SERVICE MANUAL NUMBER 11 Tble of Contents POWER TRIM Section 5D - Auto Trim II AUTO TRIM II Auto Trim II System................... 5D-2 Description........................ 5D-2 Auto Trim II Opertion.................
POWER TRIM. Table of Contents. Section 5D - Auto Trim II
SERVICE MANUAL NUMBER 14 Tble of Contents POWER TRIM Section 5D - Auto Trim II AUTO TRIM II 1 B Auto Trim II System................. 5D-2 Description...................... 5D-2 Auto Trim II Opertion...............
Hydraulic fluid power Dimensions and requirements for screw-toconnect quick-action couplings for general purpose
INTERNATIONAL STANDARD ISO 14541 First edition 2013-03-15 Hydraulic fluid power Dimensions and requirements for screw-toconnect quick-action couplings for general purpose Transmissions hydrauliques Dimensions
This document is a preview generated by EVS
INTERNATIONAL STANDARD NORME INTERNATIONALE IEC 62282-3-201 Edition 2.0 2017-08 colour inside Fuel cell technologies Part 3-201: Stationary fuel cell power systems Performance test methods for small fuel
INTERNATIONAL STANDARD NORME INTERNATIONALE
INTERNATIONAL STANDARD NORME INTERNATIONALE IEC 60358-2 Edition 1.0 2013-08 colour inside Coupling capacitors and capacitor dividers Part 2: AC or DC single-phase coupling capacitor connected between line
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 8178-4 Second edition 2007-12-15 Reciprocating internal combustion engines Exhaust emission measurement Part 4: Steady-state test cycles for different engine applications Moteurs
Name Model Description/Function. Directional Control Valve Station 5914 Used to activate the Pneumatic Box Feeder B
Job Sheet 4 PLC-Controlled Conveyor nd Sensors OBJECTIVE To fmilirize yourself with the vrious sensors provided with the Flexible Mnufcturing System nd mesure their respective sensing rnges. To use the
ISO INTERNATIONAL STANDARD. Earth-mover tyres and rims Part 3: Rims. Pneumatiques et jantes pour engins de terrassement Partie 3: Jantes
INTERNATIONAL STANDARD ISO 4250-3 Fourth edition 2011-05-01 Earth-mover tyres and rims Part 3: Rims Pneumatiques et jantes pour engins de terrassement Partie 3: Jantes Reference number ISO 4250-3:2011(E)
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 62133 First edition 2002-10 Secondary cells and batteries containing alkaline or other non-acid electrolytes Safety requirements for portable sealed secondary cells, and for
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60297-5-107 First edition 2001-01 Mechanical structures for electronic equipment Dimensions of mechanical structures of the 482,6 mm (19 in) series Part 5-107: Subracks and associated
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60297-5-104 First edition 2001-01 Mechanical structures for electronic equipment Dimensions of mechanical structures of the 482,6 mm (19 in) series Part 5-104: Subracks and associated
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 6149-1 Second edition 2006-02-15 Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 1: Ports with truncated
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61951-2 Second edition 2003-04 Secondary cells and batteries containing alkaline or other non-acid electrolytes Portable sealed rechargeable single cells Part 2: Nickel-metal
Excalibur EX-21 & EX-30 Fretsaws. User Manual. Axminster Reference No: (EX-21) (EX-30)
Excliur EX-21 & EX-30 Fretsws 950007 (EX-30) 950006 (EX-21) Axminster Reference No: 950006 (EX-21) 950007 (EX-30) User Mnul 950006-950007 www.xminster.co.uk Index of Contents... Pge No. Index of Contents...02
Is INTERNATIONAL STANDARD
INTERNATIONAL STANDARD Is0 4400 Third edition 1994-09-O 1 Fluid power systems and components - Three-pin electrical plug connectors with earth contact - Characteristics and requirements Transmissions hydrauliques
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 7299-2 First edition 2009-02-15 Diesel engines End-mounting flanges for pumps Part 2: High-pressure supply pumps for common rail fuel injection systems Moteurs diesels Brides
This document is a preview generated by EVS
INTERNATIONAL STANDARD NORME INTERNATIONALE IEC 62928 Edition 1.0 2017-12 Railway applications Rolling stock Onboard lithium-ion traction batteries Applications ferroviaires Matériel roulant Batteries
Shell boilers. Part 8: Requirements for safeguards against excessive pressure. BS EN :2001 Incorporating Corrigendum No. 1 BRITISH STANDARD
BRITISH STANDARD Shell boilers Part 8: Requirements for safeguards against excessive pressure The European Standard EN 12953-8:2001 has the status of a British Standard ICS 27.060.30; 27.100 BS EN 12953-8:2001
RPEA3-06. Functional Description HA /2011. Directional Control Valves Solenoid Operated with 8W Coil. Replaces HA /2007
Directionl Control Vlves Solenoid Operted with 8W Coil RPEA3-06 0/20 Size 06 (D 03) 350 br (5076 PSI) 80 L/min (2 GPM) Replces 2/2007 /3-, /2- wy directionl control vlves Enclosure type to IP65 Push button
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 15524 First edition 2011-11-01 Pneumatic fluid power Cylinders Single-rod short-stroke cylinders, 1 000 kpa (10 bar) series, bores from 20 mm to 100 mm Transmissions pneumatiques
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60470 Second edition 1999-10 High-voltage alternating current contactors and contactor-based motor-starters Contacteurs pour courants alternatifs haute tension et démarreurs
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60745-1 Edition 3.2 2003-08 Edition 3:2001 consolidated with amendments 1:2002 and 2:2003 Hand-held motor-operated electric tools Safety Part 1: General requirements Outils électroportatifs
This document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 13738 Second edition 2011-07-01 Lubricants, industrial oils and related products (class L) Family E (Internal combustion engine oils) Specifications for two-stroke-cycle gasoline
This document is a preview generated by EVS
INTERNATIONAL STANDARD NORME INTERNATIONALE IEC 61800-9-1 Edition 1.0 2017-03 colour inside Adjustable speed electrical power drive systems Part 9-1: Ecodesign for power drive systems, motor starters,
Safety Relay Unit. Ordering Information. Ultra Slim Safety Relay
Sfety Rely Unit Ultr Slim Sfety Rely Unit Models of width 17.5 mm (smllest Unit in the world s of Jnury 2001) vilble with 2 or 3 poles. Models of width 22.5 mm with 3 poles lso vilble. EN stndrds (TÜV
Series 250 Type and Type Pneumatic Control Valves Type 3251 Globe Valve
Series 250 Type 3251-1 nd Type 3251-7 Pneumtic Control Vlves Type 3251 Globe Vlve DIN version Appliction Control vlve for process engineering pplictions with high industril requirements Nominl size DN
Cooling Efficiency 2017/2018 Cooling Equipment Rebate Application
Business Appliction Cooling Efficiency 2017/2018 Cooling Equipment Rebte Appliction For use with invoices dted on or fter Jnury 1, 2017 OID: (Internl use only) Business customer informtion Compny nme Dte
Pneumatic Actuators 1000, 1400, 2800, and 2 x 2800 cm² Type 3271 and Type 3277 for integral positioner attachment Hand-operated Actuator Type 3273
Pneumtic Actutors 000, 400, 2800, nd 2 x 2800 cm² Type 27 nd Type 277 for integrl positioner ttchment nd-operted Actutor Type 27 Appliction Liner ctutor in prticulr for ttchment to Series 240, 250, nd
This document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 1179-1 Second edition 2013-11-01 Connections for general use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Part 1: Threaded
This document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 9974-4 Second edition 2016-12-01 Connections for general use and fluid power Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing Part 4: Dimensions,
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60383-2 First edition 1993-04 Insulators for overhead lines with a nominal voltage above 1 000 V Part 2: Insulator strings and insulator sets for a.c. systems Definitions, test
PURPOSE: Notification and support of the Mandatory Inspections Called for in SB3-08A
TELEDYNE CONTINENTL IRCRFT ENGINE CRITICL SERVICE BULLETIN COMPLINCE NECESSRY TO MINTIN SFETY SUBJECT: Slick Service Bulletin Category 2 CSB08-9 Technical Portions F pproved(supersedes CSB08-9) PURPOSE:
This document is a preview generated by EVS
TECHNICAL SPECIFICATION ISO/TS 19425 First edition 2015-12-15 Reciprocating internal combustion engines Measurement method for air cleaners Sound power level of combustion air inlet noise and insertion
This document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 15829 Second edition 2013-06-15 Road vehicles Side impact test procedures for the evaluation of occupant interactions with side airbags by pole impact simulation Véhicules routiers
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60034-1 Eleventh edition 2004-04 Rotating electrical machines Part 1: Rating and performance This English-language version is derived from the original bilingual publication
INTERNATIONAL STANDARD NORME INTERNATIONALE
INTERNATIONAL STANDARD NORME INTERNATIONALE IEC 62485-3 Edition 1.0 2010-08 Safety requirements for secondary batteries and battery installations Part 3: Traction batteries Exigences de sécurité pour les
TA25DU0.4 Overload Relay a. Features. Descriptions
3804 South Street 7594-723, TX Ncogdoches Phone: 93-59-7941 Fx: 93-50-485 0.4 Overlod Rely-0.25 0.4 Thoms&Betts-Abb Ins Prod Ctlog Number Mnufcturer Description Weight per unit Product Ctegory Fetures
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 14396 First edition 2002-06-01 Reciprocating internal combustion engines Determination and method for the measurement of engine power Additional requirements for exhaust emission
ISO 4409 INTERNATIONAL STANDARD. Hydraulic fluid power Positivedisplacement
INTERNATIONAL STANDARD ISO 4409 Second edition 2007-04-01 Hydraulic fluid power Positivedisplacement pumps, motors and integral transmissions Methods of testing and presenting basic steady state performance