High Accuracy Wire Electrical Discharge Machines
|
|
- Spencer Brown
- 5 years ago
- Views:
Transcription
1 Equipment and Construction Work for Machine Installation 1. Floor area and foundation work 4. Electrical work W32FB W53FB 2. Factory air-conditioning equipment Recommended optimal temperature 20 1 Heat release rate kw kcal / h W32FB Required installation space (including maintenance area) mm Width Depth Height It is recommended that a foundation be prepared for installing a machine, because a solid foundation is essential for maintaining high accuracy. Allowable vibration 0.7 m/s G maximum Operating temperature range: C Relative humidity: 75% maximum (without any condensation) W53FB Measures against electromagnetic interference It is recommended that EDM machines be installed in a shielded room to avoid electromagnetic interference. In addition, use of the optional power supply line filter is recommended if there is a possibility that electromagnetic noise from the power supply line might affect the operation of other equipment. Power supply specification Total power consumption (kva) Breaker capacity (A) Circuit breaker Power line size (mm 2 ) Recommended grounding W32FB AC 3-phase, 200/220 V ±10%, 50/60 Hz, power factor ma current sensitivity for the inverter circuit (when not installed in a shielded room) 5. Provision of compressed air supply 0.6 MPa, 100 L/min (equivalent to a 1.5 kw compressor) Connection port: 8 mm dia. high coupler (standard equipment) 7. Factory environment The following factory environment is recommended for maintaining high machine accuracy at all times. EDM machines should be isolated from equipment that produces dust. EDM machines should not be exposed to direct sunlight or discharges from an airconditioning system. EDM machines should not be partially heated by a stove or other heating device. 14 W53FB 14 Class C grounding using 14 mm 2 ground wire (maximum ground resistance of 10 ) 6. Provision of water supply An automatic water supply unit is available as optional equipment for controlling the fluid volume of the dielectric fluid supply unit automatically. A water supply source will be necessary if the automatic water supply unit is used. Hose connection port: 17 mm dia. hose coupling High Accuracy Wire Electrical Discharge Machines Makino Milling Machine Co., Ltd. Head Office 3-19 Nakane 2-chome, Meguro-ku, Tokyo , Japan Tel: Fax: URL Atsugi Works Overseas Sales Department 4023 Nakatsu, Aikawa-machi, Aiko-gun, Kanagawa , Japan Tel: Fax: Makino Inc Innovation Way, Mason, Ohio, 45040, U.S.A. Tel: Fax: URL Makino Werkzeugmaschinenfabrik GmbH Hamburg Office Wiesendamm 30 D Hamburg, Germany Tel: Fax: URL Kirchheim Office Kruichling 18 D Kirchheim unter Teck, Germany Tel: Fax: URL Makino France S.A.S. Z.A. Les Bordes 21, rue Gustave Madiot F BONDOUFLE cedex, France Tel: Fax: URL Makino Italia S.R.L. Via Codognino Laudense, 40 I Cornegliano (LO), Italy Tel: Fax: URL Makino s.r.o. Luzna 716/ Praha 6, Czech Republic Tel: FAX: Makino s.r.o. (SK) Kolma 4 SK Bratislava,Slovakia Tel: FAX: URL Makino-CNC Ileri Teknoloji ve Pazarlama Limited Sirketi Istanbul Trakya Serbest Bolgesi Ataturk Bulvari Begonya Sok. Blok: Catalca / Istanbul / TURKEY Tel: /19 Fax: Makino Asia Pte Ltd 2 Gul Avenue, Singapore Tel: Fax: URL Makino India Private Limited No.11, Export Promotion Industrial Park K.R. Puram, Bangalore India Tel: Fax: Makino Thailand Co., Ltd. 57/23 Moo 4, Ramintra Road, km 2.5, Bangkhen, Bangkok Thailand Tel: Fax: Makino China Co., Ltd. No.2, Makino Road, Jiangsu Mould Industry Experimental Zone, Kunshan National Hi-Tech Industrial Park, Kunshan, Jiangsu, Post Code: Tel: Fax: Makino Milling Machine Co., Ltd. Seoul Branch 6th Floor, , Doksan-Dong, Geumcheon-Gu, Seoul, Korea Tel: Fax: URL *The specifications in this catalog may be changed without prior notice to incorporate improvements resulting from ongoing R&D programs. *The machines displayed in this catalog are fitted with optional equipment. *The export of this product maybe subject to the Japanese Foreign Exchange and Foreign Trade Law. When further transport of this product to another country is being considered, prior consultation with Makino Corporation is required. Printed in Japan H-244Ed 0705/3(SJ-M)
2
3
4
5 7 W32FB W53FB W32FB W53FB 8
6
7
8
9
10
ISO Interface. Large capacity. Light weight. Accommodates enclosure IP65. Solenoid Valve (with M Connector) Conforming to ISO
P-EX01-A Solenoid Valve (with M Connector) Conforming to ISO 1507-1, Large capacity EVS1-01 (Size: 01) EVS1-0 (Size: 0) Light weight Size 01 (-position): 0.6kg Size 0 (-position): 0.18kg Flow rate 1000L/min
More informationHORIBA Jobin Yvon GmbH HORIBA Vietnam Company Limite ted Hea d Offi ce HORIBA ITALIA Srl Mil ano Office HORIBA Korea Ltd. Seoul Branch HORIBA Instruments Inc. Edison office HORIBA FRANCE SAS HORIBA India
More informationYASKAWA AC DRIVES. Application Solution. Extruder. YASKAWA AC Drive GA700. YASKAWA Matrix Converter U1000
YASKAWA AC DRIVES Application Solution Extruder YASKAWA AC Drive YASKAWA Matrix Converter For Extruder YASKAWA provides the answers to your extruder needs. YASKAWA ELECTRIC always stands in the shoes of
More informationHigh Performance Vector Control Drive Manual Supplement
YASKAWA AC Drive-A1000 High Performance Vector Control Drive Manual Supplement Supplement to: A1000 Quick Start Guide TOEPC71061641C Type: CIMR-AU A Models: 200 V Class: 0.4 to 110 kw (3/4 to 175 HP
More informationMOTOMAN-EPH and EP Series
Robot Optimized for Press Handling MOTOMAN-EPH and EP Series Certified for ISO91 and ISO141 QMS Accreditation R9 JQA-813 JQA-EM924 Pursuing of High-Effecient Handling between Presses Robot Optimized for
More informationMagnetic drive pumps. A worldwide best-seller, our high-quality compact magnetic drive pumps GFRPP. Magnetic drive pumps. series.
MD series Magnetic drive pumps A worldwide best-seller, our high-quality compact magnetic drive pumps Magnetic drive pumps Main material Magnetic drive seal-less pumps are free from leakage problems and
More informationGuide Ball Bushing NEW
NEW Guide Ball Bushing Contributes to compact the system Achieves load rating more than twice the Linear Bushing with the same dimensions (model LG-S) Various combinations of nut and shaft are available
More informationMagnetic drive pumps A worldwide best-seller, our high-quality compact magnetic drive pumps
MD series Magnetic drive pumps A worldwide best-seller, our high-quality compact magnetic drive pumps Main material Magnetic drive seal-less pumps are free from leakage problems and the need for seal replacement.
More informationMax. flow capacity of 5,000 L/min and max. discharge head of 98m. The world s largest class fluoroplastic magnetic drive pump.
MDW series Magnetic drive pumps Max. flow capacity of 5,000 L/min and max. discharge head of 98m. The world s largest class fluoroplastic magnetic drive pump. The MDW series are the largest class fluoroplastic
More informationCNC ROTARY TABLE for OKUMA NIKKEN KOSAKUSHO WORKS, LTD.
CNC ROTARY TABLE for OKUMA CNC260OSP4 5AX-350OSP4 NIKKEN KOSAKUSHO WORKS, LTD. Steel Way HRC58 60 Ion Nitrided Worm Wheel HV980 Worm Wheel Material is special NIKKEN order made steel. Specially hardened
More informationInstallation Manual. YASKAWA AC Drive Option Back-up Capacitor Unit for Momentary Power Loss. Type: P0010, P0020
YASKAWA AC Drive Option Back-up Capacir Unit for Momentary Power Loss Installation Manual Type: P0010, P0020 To properly use the product, read this manual thoroughly and retain for easy reference, inspection,
More informationOptions for the Ball Screw QZ Lubricator Wiper Ring W
Options for the Ball Screw Lubricator Wiper Ring W CATALOG No.322-1E OPTIONS For Ball Screws, dust-prevention and lubrication accessories are available. You can make a selection according to the application
More informationIwaki Electromagnetic Metering Pump EWN-R (Chlorine Dioxide type)
Iwaki Electromagnetic Metering Pump EWN-R (Chlorine Dioxide type) Instruction manual Thank you for choosing our product. Please read through this instruction manual before use. This manual is intended
More informationSMX-F. Self-priming magnetic drive pumps. Chemically resistant self-priming magnetic drive pumps which can tolerate abnormal operation CFRETFE
SMX-F series Self-priming magnetic drive pumps Chemically resistant self-priming magnetic drive pumps which can tolerate abnormal operation Self-priming magnetic drive pumps Main material CFRETFE The SMX-F
More informationWide Caged-roller LM Guide
NEW Wide Caged-roller LM Guide Optimal for large machines that require high rigidity and mounting accuracy Ultra-high rigidity, heavy load A wide, large roller guide model is added to the lineup CATALOG
More informationMDM. Magnetic drive pumps Magnetic drive process pump resistant to dry run damage. Magnetic drive pumps. series
MDM series Magnetic drive pumps Magnetic drive process pump resistant to dry run damage Magnetic drive pumps The MDM Series of Magnetic drive process pumps have wetted parts made of fluororesin. Patent
More informationThe first in the world!
No. BK-P042 5-port manifold solenoid valve PAT.PEND. The first in the world! Integrally molded, all-plastic body! Easy assembly! 35.3 mm [ 1.390 in] 15 mm [0. 591 in] Thin and lightweight! Nearly 40% smaller
More informationDrive systems & electrical energy production for construction, local government structures, large infrastructure and industrial projects
09.2007 / a 4183 en - 03.2008 / b Drive systems & electrical energy production for construction, local government structures, large infrastructure and industrial projects www.leroy-somer.com Drive systems
More informationYASKAWA AC DRIVES. Application Solution. Injection Molding Machine. YASKAWA AC Drive GA700. YASKAWA Matrix Converter U1000
YASKAWA AC DRIVES Application Solution Injection Molding Machine YASKAWA AC Drive YASKAWA Matrix Converter For Injection Molding Machine YASKAWA provides the answers to your injection molding machine needs.
More informationMulti Function Efficient Dynamic Altitude Simulation MEDAS
Multi Function Efficient Dynamic Altitude Simulation MEDAS BENEFITS A wide simulation range and extreme flexibility SIMULATE POSITIVE & NEGATIVE PRESSURE One system for positive & negative pressure Steady
More informationBearings for the Cement and Ready-Mix Concrete Industries
Bearings for the Cement and Ready-Mix Concrete Industries Market leading NSK technology that increases bearing life and reduces maintenance costs and downtime. Upgrading to NSK takes your operation to
More informationKR15. LM Guide Miniature Actuator. KR Series Actuators with Integrated LM Guide and Ball Screw in a Compact Stainless Steel Body. CATALOG No.
LM Guide Miniature Actuator KR1 KR Series Actuators with Integrated LM Guide and Ball Screw in a Compact Stainless Steel Body US, EPC Patent pending CATALOG No.76E LM Guide Actuator KR1 Miniature LM Guide
More informationThe mechanism that generates mist (moisture) Principles of water removal valve operation
No. BK-P034 RoHS compliant product Water Removal Valves MTV Series Our answer to counteracting condensation Troubled by condensation from small cylinders? Condensation forms Mounting the water removal
More informationME300 Series. Delta Basic Compact Drive. Automation for a Changing World. Optimized Space Utilization. High Safety and Stability.
Automation for a Changing World Delta Basic Compact Drive ME300 Series Optimized Space Utilization Compact design with up to 40% size reduction compared to existing models High Safety and Stability Safe
More informationYASKAWA AC Drive-V1000
YASKAWA AC Drive-J1000 Compact V/f Control Drive Manual Supplement Supplement to: J1000 Quick Start Guide TOEPC71060626C Type: CIMR-JU A Models: 200 V Class, Three-Phase Input: 0.1 to 5.5 kw 200 V
More informationTotal System for Regulation Compliance and Engine/Vehicle R&D
On-board Emissions Measurement System Total System for Regulation Compliance and Engine/Vehicle R&D OBS-ONE is the latest Portable Emissions Measurement System designed for engine/vehicle certification
More informationDOUBLE OCTOMILL TM PRODUCT RANGE
DOUBLE OCTOMILL TM PRODUCT RANGE Double Octomill insert selection and cutting data recommendations, see page 6. complete insert programme, see page 7. Tool angles: Jo = -11q Jp = - 8q Jf = - 8q Pitch
More informationPARALLEL PROCESSING UPS E33A
PARALLEL PROCESSING UPS E33A Low energy, high quality, high reliability parallel processing type UPS E33A Supporting network PARALLEL PROCESSING UPS Parallel operation backup time Input AC380, 400, 415,
More informationMain material GFRPP IWAKI MAGNETIC DRIVE PUMPS
Main material IWAKI MAGNETIC DRIVE PUMPS A worldwide best-seller, our high-quality compact magnetic drive pumps Our series leak-free compact magnetic pumps are a worldwide best-seller and are used in medical
More informationPrecision Ball Screw/Spline. Rotary-Nut Series Linear Motion + Rotary Motion BNS/NS. CATALOG No.327-1E
Precision Ball Screw/Spline Rotary-Nut Series Linear Motion + Rotary Motion BNS/NS CATALOG No.7-1E Contents Rotary-Nut Series Precision Ball Screw/Spline BNS/NS Japanese patent No. 7 (model NS), 77 (model
More informationIWAKI MAGNETIC DRIVE PUMPS MDM. Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA
IWAKI MAGNETIC DRIVE PUMPS Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA Magnetic drive process pump resistant to dry run damage The Series of Magnetic drive process pumps have wetted parts made of fluororesin.
More informationSpherical Roller Bearings
Spherical Roller Bearings Introducing the newest series of advanced, high performing spherical roller bearings offering higher speed and load capacities suitable for a wide variety of industrial applications.
More informationIWAKI MAGNETIC DRIVE PUMPS MDM. Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA
IWAKI MAGNETIC DRIVE PUMPS Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA Magnetic drive process pump resistant to dry run damage The Series of Magnetic drive process pumps have wetted parts made of fluororesin.
More informationSeries PMB-D PRC-A PMB-C
Low Vacuum Pump Mechanical Booster Pump PMB / PRC Series By using mechanical booster pumps together with backing pumps such as dry vacuum pumps and oil rotary pumps, it is possible to increase pumping
More informationYou ll find many Tsubaki products being
You ll find many Tsubaki products being There are many processes involved in making a motor vehicle. You ll find Tsubaki products in all of these processes, from conveying vehicle bodies from the stockyard,
More informationAgilent 4UHV Ion Pump Controller. For Ultra High Vacuum
Agilent 4UHV Ion Pump Controller For Ultra High Vacuum The New Agilent 4UHV Ion Pump Controller The new state-of-the-art Agilent 4UHV Ion Pump Controller operates up to four pumps simultaneously and independently.
More informationCarbon/Sulfur Analyzer
Carbon/Sulfur Analyzer EMIA Series Carbon/Sulfur Analyzer Simple to operate, dustless and low maintenance. MADE IN JAPAN QUALITY Carbon/Sulfur Analyzer The EMIA-Pro and Carbon/Sulfur Analyzer series is
More informationMTC. Mold Temperature Control. Consilience Technology
We supply Take-out Robot, Factory Automation, Auxiliary Equipment, Auto Feeding system as an Integrated Engineering Solution provider. Consilience Technology MTC Mold Temperature Control 02 03 Company
More information4CKNYC[A2 A2 AKPFGZ GRU AXLE RAIL / 02
P641G RAILWAY INDEX Mitsubishi Materials is constantly engaging ultra modern technologies in the research and development of cutting tools. Results of the research provide solutions for the ever increasing
More informationIWAKI MAGNETIC DRIVE PUMPS MDM. Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA
IWAKI MAGNETIC DRIVE PUMPS Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA Magnetic drive process pump resistant to dry run damage The Series of Magnetic drive process pumps have wetted parts made of fluororesin.
More informationUNIVERSAL. The Ultimate Performance CMM
UNIVERSAL The Ultimate Performance CMM UNIVERSAL Extruded Bridge Beam with Dovetail Guideways Ultra Rigid Advanced Alloy Platform Dynamic Wireless Thermal CMM & Part Compensation 90mm x 90mm Z Ram Cross-Section
More informationRHR Type SPHERICAL ROLLER BEARINGS
RHR Type SPHERICAL ROLLER BEARINGS Supply the new series of spherical roller bearings. Significant contribution to equipment size reduction based on the increase in load rating of the bearing. RHR Type
More informationRadio Wave Absorber. Radio Wave Absorber. vol.3
Radio Wave Absorber vol.3 Radio Wave Absorber Radio Wave Absorber vol.3 CONTENTS Radio Wave Absorber ooo.. Reflectivity(dB) 0-10 -20-30 -40 10 100 1000 Frequency(MHz) Radio Wave Absorber H2 H1 W1 W2 W3
More informationIWAKI MAGNETIC DRIVE PUMPS MDM. Patent & Pat.Pend. JAPAN / U.S.A. / EU / CHINA / TAIWAN
IWAKI MAGNETIC DRIVE PUMPS Patent & Pat.Pend. JAPAN / U.S.A. / EU / CHINA / TAIWAN Magnetic drive process pump resistant to dry run damage The Series of Magnetic drive process pumps have wetted parts made
More informationIlluminated buzzer for elevators, robots and production sites
ø22mm HW1Z Illuminated Buzzer Illuminated buzzer for elevators, robots and production sites Combination buzzer and pilot light Alerts workers of danger with sound and light Waterproof construction HW1Z
More informationSUBMERSIBLE 4" PUMPS 4 PUMP - SVM SERIES
SUBMERSIBLE 4" PUMPS 4 PUMP - SVM SERIES 1 TABLE OF CONTENTS 4 PUMP SERIES PAGE SVM30...4 SVM55...6 SVM70...8 SVM100...10 1.32 1.98 2.64 3.30 3.96 4.62 5.28 5.94 6.61 7.27 EN ISO 9906 SUBMERSIBLE PUMPS
More informationGENERAL GAS INSTALLATION LABORATORY SOLUTIONS
GENERAL GAS INSTALLATION LABORATORY SOLUTIONS 1 2 1 3 2 1 PRECISE RESULTS NEED PRECISE EQUIPMENT The complete range of specialty gas equipment for safety, control and productivity from source to process.
More informationLOKRING & LOKCLIP SOLDER-FREE TUBE AND HOSE CONNECTIONS
LOKRING & LOKCLIP SOLDER-FREE TUBE AND HOSE CONNECTIONS For the installation and repair of vehicle air conditioning lines ONE SYSTEM ENDLESS POSSIBILITIES MORE THAN 1.5 BILLION LOKRINGS HAVE BEEN SUCCESSFULLY
More informationLOKRING & LOKCLIP SOLDER-FREE TUBE AND HOSE CONNECTIONS
LOKRING & LOKCLIP SOLDER-FREE TUBE AND HOSE CONNECTIONS For the installation and repair of vehicle air conditioning lines ONE SYSTEM ENDLESS POSSIBILITIES MORE THAN 1.5 BILLION LOKRINGS HAVE BEEN SUCCESSFULLY
More informationParts Manual. cascade
c Parts Manual Model Catalog Number Multi-Purpose Clamp 8G-MCS-48 corporation For Technical Assistance call: 800-7-, Fax: 888-9-807 To Order Parts call: 888-7-, Fax: 888-9-04 OR Write: Cascade Corporation,
More informationDelta Planetary Gearbox PA Precision Series
Automation for a Changing World Delta Planetary Gearbox PA Precision Series www.deltronics.ru PA Precision Series Features High Rigidity, High Torque Employs uncaged needle roller bearings with a set design
More informationOnline Monitoring Webserver V1.0
Online Monitoring Webserver V1.0 1 IMPRINT Original User Manual Online Monitoring Webserver V1.0 China Address: No.2 Tianhe Road, Trina PV Industrial Park, New District, Changzhou, Jiangsu Postcode: 213031
More informationInstallation Instructions
c Installation Instructions Flow Control s This sheet provides installation instructions and replacement parts list for Cascade Flow Control s. The valve reduces the flow rate to the attachment and returns
More informationThe first in the world!
No. BK-P042-3 5-port manifold solenoid valve PAT.PEND. The first in the world! Integrally molded, all-plastic body! NEW OPTION!! Quick fitting for Inch tube added. 5/32 inch 1/4 inch 5/16 inch 3/8 inch
More informationHybrid UPS Saves Energy and Achieves High Reliability. Output capacity. 3 kva. 2 kva. Output capacity. 2.1kW. 1.4kW
HYBRID UPS E11A Hybrid UPS Saves Energy and Achieves High Reliability SANUPS HYBRID UPS E11A 19 inch NETWORK rack MONITORING Mountable EIA 100V model Input AC100,110,115,120V Single-phase 200V model Input
More informationParts Manual. cascade
c Parts Manual Model Catalog Number Fork Positioner 55K-FPS-A011 R2 corporation OR Write: Cascade Corporation, P.O. Box 20187, Portland, OR 97220 Internet: www.cascorp.com Fork Positioner Assembly Sticker
More informationParts Manual. cascade
c Parts Manual Model Catalog Number Fork Positioner 55K-FPS-A330 R0 corporation OR Write: Cascade Corporation, P.O. Box 20187, Portland, OR 97220 Internet: www.cascorp.com Blank All dealerships with an
More informationParts Manual. cascade
c Parts Manual Model Catalog Number QFM Push/Pull E-QLB-Q00 R cascade corporation To Order Parts call: 888-7-, Fax: 888-9-0 OR Write: Cascade Corporation, P.O. Box 087, Portland, OR 970 Internet: www.cascorp.com
More informationInstallation instructions
www.somfy.com Sonesse 0 DCT Installation instructions Ref :505080A Please read installation instructions and programming instructions completely prior to proceeding with installation and programming. Failure
More informationOperating Instructions: Surtronic AV150 active vibration isolation desktop unit. K Issue 1
Operating Instructions: Surtronic AV150 active vibration isolation desktop unit K505-341 Issue 1 1 Contents 1 Introduction... 3 2 Unpacking... 3 3 Symbols used in these Instructions... 3 4 Safety Information...
More informationEBARA Turbomolecular Pumps
EBARA Turbomolecular Pumps Model EBT Innovative Technology. Ceramic-Bearing Model EBT Model EBT EBARA s Model EBT are mechanical-bearing, compound turbomolecular pumps which compliment EBARA s existing
More informationSTEEL INDUSTRY ELECTRIC ARC FURNACES REFRACTORY CONCEPT SOLUTIONS
STEEL INDUSTRY ELECTRIC ARC FURNACES REFRACTORY CONCEPT SOLUTIONS TOGETHER FOR MORE AT CALDERYS, OUR MISSION IS TO DELIVER VALUE TO OUR CUSTOMERS. We are a world leader in providing refractory solutions
More informationSTEEL INDUSTRY STEEL LADLES REFRACTORY CONCEPT SOLUTIONS
STEEL INDUSTRY STEEL LADLES REFRACTORY CONCEPT SOLUTIONS TOGETHER FOR MORE AT CALDERYS, OUR MISSION IS TO DELIVER VALUE TO OUR CUSTOMERS. We are a world leader in providing refractory solutions and services.
More informationGRIPPER CHAIN. For form, fill, and vacuum seal wrapping applications. Lower maintenance costs Increased uptime Increased productivity
GRIPPER CHAIN For form, fill, and vacuum seal wrapping applications Lower maintenance costs Increased uptime Increased productivity A formidable new force has taken hold of wrapping operations. Get a Grip
More informationMAINTENANCE OF SMOKE EXTRACTION MOTORS
4413 en - 2010.05 / b MAINTENANCE OF SMOKE EXTRACTION MOTORS Good practice guide Maintenance of smoke extraction motors Good practice guide The Maintenance or Repair of smoke extraction motors maintains
More informationSPV Series Slides OPERATING MANUAL. Table of contents 1 Introduction Compliance with the EC Directives Names of parts...
HL-17012 SPV Series Slides OPERATING MANUAL Thank you for purchasing an Oriental Motor product. This Operating Manual describes product handling procedures. Please read this Operating Manual and the separate
More informationParts Manual. cascade
c Parts Manual Model Single-Double Pallet Handler Catalog Number 3G-FDS-B500 R6 corporation To Order Parts call: 888-7-33, Fax: 888-39-034 OR Write: Cascade Corporation, P.O. Box 087, Portland, OR 970
More informationParts Manual. cascade
c Parts Manual Model Serial Number Fork Positioner 55K-FPS-A086 R2 corporation OR Write: Cascade Corporation, P.O. Box 20187, Portland, OR 97220 Internet: www.cascorp.com All dealerships with an open
More informationIWAKI Gas-Liquid Transfer Pump APN-085-W Instruction Manual. Read this manual before use of product
IWAKI Gas-Liquid Transfer Pump APN-085-W Instruction Manual Read this manual before use of product Thank you for selecting the IWAKI APN series gas-liquid transfer pump. This instruction manual deals with
More informationParts Manual. cascade
c Parts Manual Model Single-Double Pallet Handlers Catalog Number 5G-FDS-A R7 corporation OR Write: Cascade Corporation, P.O. Box 087, Portland, OR 970 Internet: www.cascorp.com Publications OOL CATALOG
More informationInstallation Instructions
c Installation Instructions C-Series Integral Sideshifter & K-Series Fork Positioner Installation Kits for Toyota Masts This sheet provides installation instructions for Cascade Installation Kits. Each
More informationParts Manual. cascade
c Parts Manual Model Catalog Number Carton Clamp 35D-CCS-35Q R3 corporation OR Write: Cascade Corporation, P.O. Box 2087, Portland, OR 97220 Internet: www.cascorp.com Cascade is a Registered Trademark
More informationETS/ETV/ECS/ECV FP1 Series
Products for Food Manufacturing Processes FP Series Electric Actuator ETS/ETV/ECS/ECV FP1 Series FP1 Series Lubricants Food-grade (NSF H1) lubricants are used on flow passages and sliding portions. Stainless
More informationNEW. PLASTIC MODULAR CHAIN WT0705-W Plastic Top Chain
NEW PLASTIC MODULAR CHAIN WT0705-W Plastic Top Chain A new 7.5 mm-pitch chain has been added to our lineup of plastic modular chains. Features of WT0705-W Plastic Modular Chain Knife-edge conveyor applications
More informationCompany profile for wheels production HEELS PRODUCTION MADE IN ITALY
Company profile for wheels production HEELS PRODUCTION w w w. i m t i n t e r m a t o. i t 3 1983 Production of vertical turning lathes for the machining of allumium light alloy wheels begins. 1987 Introduction
More informationParts Manual. cascade
c Parts Manual Model Push/Pull - Ext Range Catalog Number E-PXS-3 cascade corporation OR Write: Cascade Corporation, P.O. Box 2017, Portland, OR 97220 Internet: www.cascorp.com Cascade is a Registered
More informationH2R and H2L Cable Reel
c Installation Service and Parts Manual H2R and H2L Cable Reel Serial Numbers 678971 through 678972 Part Number 679932-R1 cascade corporation For Technical Assistance call: 800-227-2233, Fax: 888-329-8207
More informationDYNAS3 LEADING SOLUTIONS FOR DYNAMIC ENGINE TESTING. Explore the future
LEADING SOLUTIONS FOR DYNAMIC ENGINE TESTING DYNAS3 Explore the future Automotive Test Systems Process & Environmental Medical Semiconductor Scientific 2 DYNAS 3 Best-in-class AC dynamometers The HORIBA
More informationParts Manual. cascade
c Parts Manual Model Catalog Number Paper Roll Clamp 3H-RTF-AX8-00 cascade corporation OR Write: Cascade Corporation, P.O. Box 087, Portland, OR 970 Internet: www.cascorp.com 5 3 4 Decals 7 8 C-67554-4
More informationParts Manual. cascade
c Parts Manual Model Catalog Number Sideshifter 100F-SSS-B017 R2 cascade corporation OR Write: Cascade Corporation, P.O. Box 20187, Portland, OR 97220 Internet: www.cascorp.com PART NUMBER Decals 1 2 Recommended
More informationParts Manual. cascade
c Parts Manual Model Single-Double Pallet Handler Catalog Number 5G-FDS-B R9 cascade corporation OR Write: Cascade Corporation, P.O. Box 087, Portland, OR 970 Internet: www.cascorp.com Publications OOL
More informationConSep System. Integrated filtration Chip & Coolant System. Economical / less space / modular
ConSep System Integrated filtration Chip & Coolant System Economical / less space / modular ConSep2000 II HP The integrated filtration solution The famous ConSep 2000 System is now improved by integration
More informationSBK. High-Speed Caged Ball Screw Model SBK NEW. Achieves high-speed feed at 114 m/min With model SBK4030
NEW High-Speed Caged Ball Screw Model SBK Low noise, long-term maintenance-free operation High speed, high accuracy SBK DN value: 160,000 Achieves high-speed feed at 114 m/min With model SBK4030 For details,
More informationParts Manual. cascade
c Parts Manual Model Catalog Number Paper Roll Clamp H-RCF-AQ008 cascade corporation OR Write: Cascade Corporation, P.O. Box 087, Portland, OR 970 Internet: www.cascorp.com 5 4 Decals 7 8 C-67554-4 RC860.ai
More informationParts Manual. cascade
c Parts Manual Model Catalog Number Carton Clamp 35D-CCS-35A R3 corporation OR Write: Cascade Corporation, P.O. Box 2087, Portland, OR 97220 Internet: www.cascorp.com Blank Safety Decals 2 cascade 2 cascade
More informationPrecision Ball Screw/Spline. Rotary-Nut Series Linear Motion + Rotary Motion BNS/NS. CATALOG No.327E
Precision Ball Screw/Spline Rotary-Nut Series Linear Motion + Rotary Motion BNS/NS CATALOG No.7E Contents Rotary-Nut Series Precision Ball Screw/Spline BNS/NS Japanese patent No. 7 (model NS), 77 (model
More informationParts Manual. cascade
c Parts Manual Model Catalog Number Paper Roll Clamp H-RCP-B005 R0 corporation For Technical Assistance call: 800-7-, Fax: 888-9-807 To Order Parts call: 888-7-, Fax: 888-9-0 OR Write: Cascade Corporation,
More informationD-Series. Sideshifters NSTALLATION INSTRUCTIONS. cascade PERIODIC MAINTENANCE. corporation Cascade is a Registered Trademark of Cascade Corporation
I and NSTALLATION INSTRUCTIONS PERIODIC MAINTENANCE D-Series Sideshifters Manual Number 672358-R7 cascade corporation Cascade is a Registered Trademark of Cascade Corporation C ONTENTS Page INSTALLATION
More informationMESA-50. X-ray Fluorescence Analyzer. Your new business partner for RoHS, Halogen free, ELV applications
MESA-50 X-ray Fluorescence Analyzer Your new business partner for RoHS, Halogen free, ELV applications Touch and HORIBA has been selling our XGT-WR series of EDXRF analyzers worldwide for many years to
More informationMULTI FUNCTION EFFICIENT DYNAMIC ALTITUDE SIMULATION MEDAS
MULTI FUNCTION EFFICIENT DYNAMIC ALTITUDE SIMULATION MEDAS 2 ACCURATE DYNAMIC EFFICIENT Altitude simulation for R&D The topic of Real Driving Emissions (RDE) is becoming more and more impor tant. Accurate
More informationInstallation Instructions
c Installation Instructions K-Series Fork Positioner Termination Kits 0, 0, 0, 000 and 0 This sheet provides installation instructions and replacement parts list for Cascade High Termination Kits 0, 0,
More informationVaristar Cabinet Platform
Varistar Cabinet Platform TWO LOAD-CARRYING CLASSES, ONE ACCESSORY RANGE: THE VARISTAR FRAMES Varistar PlatformMAIN CATALOGPart number in bold face type: ready for shipping within 2 working dayspart number
More informationHigh-Temperature Axial Extensometer. Measure Strain With Specimens At Temperatures Up To 1200 C (2200 F)
m 632.53 High-Temperature Axial Extensometer Measure Strain With Specimens At Temperatures Up To 1200 C (2200 F) An Overview Of The 632.53 High-Temperature Axial Extensometer The 632.53 Advantage Ideal
More informationIWAKI PNEUMATIC-DRIVEN BELLOWS PUMP CFD-8T-B TYPE Instruction Manual. Read this manual before use of product
IWAKI PNEUMATIC-DRIVEN BELLOWS PUMP CFD-8T-B TYPE Instruction Manual Read this manual before use of product Thank you for having purchased the Iwaki Bellows Pump Model: CFD-8T-B. This pump is designed
More informationtesting to perfection MultiTest-i Technical Datasheet
testing to perfection MultiTest-i Technical Datasheet MultiTest 0.5-i, 1-i & 2.5-i 0.5kN 1kN 2.5kN Height Width Depth Vertical Daylight* MultiTest 0.5-i 1710mm (67.3) 290mm (11.4) 414mm (16.3) 1359mm (53.5)
More informationView our inventory TRIVAC E 2
Vacuum Solutions Application Support Service LEYBOLD VACUUM ET 01.603/1.02 View our inventory TRIVAC E 2 D 5 E; D 10 E; D 16 E Dual-Stage Rotary Vane Vacuum Pump Valid from Serial-No.: T2 TRIVAC D5E: 140030
More informationThe New Unique Varian Dry Turbo Pumping System: TPS-compact. Varian, Inc. Vacuum Technologies. idealvac.com (505) idealvac.
Varian, Inc. Vacuum Technologies The New Unique Varian Dry Turbo Pumping System: TPS-compact idealvac.com (505)872-0037 idealvac.com NEW DRY TPS-compact The new dry TPS-compact is a portable, fully integrated
More informationTABUCHI ELECTRIC CO., LTD.
Company Information To grow and continue to lead as a sustainable earth-friendly company. TABUCHI ELECTRIC CO., LTD. TABUCHI ELECTRIC CO., LTD. Head Office Nissay Shin-osaka Bldg., 3-4-30 Miyahara, Yodogawa-ku,
More informationParts Manual. cascade
c Parts Manual Model 36G-CCT Tipping Clamp Catalog Number 36G74237 corporation OR Write: Cascade Corporation, P.O. Box 20187, Portland, OR 97220 Internet: www.cascorp.com Blank 1 Safety Decals 4 1 3 2
More informationNI PS-15/16/17 Side Mount Brackets
INSTALLATION GUIDE NI PS-15/16/17 Side Mount Brackets This document provides the installation procedure for the NI PS-15/16/17 Side Mount Brackets. This accessory is used to mount NI PS-15/16/17 power
More information