BeA Price Book effective July 1st, BeA Fasteners USA, Inc Green Point Dr., Suite 101 Greensboro, NC 27410
|
|
- Gerald Simpson
- 5 years ago
- Views:
Transcription
1 BeA Price Book 2015 effective Replaces all other price books Tel.: FAX:
2 72 series (22 ga. 1/2" cr.) 71 series (22 ga. 3/8" cr.) Fine Wire 22 gauge BeA 71 SERIES - 3/8" CROWN - 22GA Interchange: Stanley-Bostitch BA71, JK670, Senco C Item # leg $/m /3 NK GALV.** 1/8" $0.213 $4.260 $ /4 NK GALV.** 5/32" $0.156 $3.120 $ /5 NK GALV.** 3/16" $0.156 $3.120 $ /6 NK GALV.** 1/4" $0.156 $3.120 $ /8 NK GALV. 5/16" $0.168 $3.360 $ /10 NK GALV. 3/8" $0.190 $3.800 $ /10 NK GALV. BLACK 3/8" $0.243 $4.860 $ /11 NK GALV. 7/16" $0.212 $4.240 $ /12 NK GALV. 1/2" $0.216 $4.320 $ /14 NK GALV. 9/16" $0.246 $4.920 $ /16 NKS GALV. HARDENED 5/8" $0.346 $4.152 $ /6 NK (10M) GALV.** 1/4" $0.156 $1.560 $ /10 NK (10M) GALV. 3/8" $0.190 $1.900 $ /12 NK (10M) GALV. 1/2" $0.216 $2.160 $ /14 NK (10M) GALV. 9/16" $0.246 $2.460 $ /5 NR STAINLESS 304* (**) 3/16" $0.991 $9.910 $ /06 NR STAINLESS 304* (**) 1/4" $0.991 $9.910 $ /08 NR STAINLESS 304* 5/16" $1.077 $ $ /10 NR STAINLESS 304* 3/8" $1.210 $ $ /12 NR STAINLESS 304* 1/2" $1.320 $ $ ** BeA recommends the use of a Block Out Nose to prevent short staples from tumbling in front nose. Use part #: / w/block out nose). BLACK Staples are available in other leg lengths as special order. * SS CAN BE PURCHASED BY THE BOX. SS GRADE: Series - 3/8" Crown - Staplers - 22 Gauge (Made in Germany) / $ $ Type Staple - Max 5/8" Leg / $ $ Type Staple - Max 5/8" Leg /16-421S $ $ Type Staple - Max 5/8" Leg - W/Safety / w/ Block Out Nose**** $ $ Type Staple - Max 1/4" Leg /16-401LM $ $ Type Staple - Max 5/8" Leg - Long Magazine /16-436LN $ $ Type Staple - Max 5/8" Leg - Long Nose /14-451A $ $ Type Staple - Max 9/16" Leg - Autofire /14-451ALM $ $ Type Staple - Max 9/16" Leg - Autofire Long Mag /25-554LM $ $ Type Staple - Max 1" Leg - Long Magazine /16 Label Stapler**** $2, $2, Fastagger II Lumber End Tagger System Block Out Nose for 71/ $ recommended for staples 1/4" (6mm) and shorter BeA 72 SERIES - 1/2" CROWN - 22GA (galv.) Interchange: DF Item # leg $/m /06 NK 1/4" $0.305 $9.992 $ /8 NK 5/16" $0.333 $8.485 $ /10 NK 3/8" $0.355 $7.753 $ /12 NK 1/2" $0.392 $7.134 $ /14 NK 9/16" $0.435 $6.334 $ Series - 1/2" Crown - Staplers - 22 Gauge (Made in Germany) / $ $ /16-422S**** $ $ /14-452A**** $ $ Type Staple - Max 5/8" Leg 72 Type Staple - Max 5/8" Leg - W/Safety 72 Type Staple - Max 9/16" Leg ****=Special Order 1
3 97 series (20 ga. 3/16" cr.) 80 series (20 ga. 1/2" cr.) Fine Wire 20 gauge BeA 80 SERIES - 1/2" CROWN - 20 GA Interchange: Stanley-Bostich BA380, JK680 Item # leg $/m /4 NK GALV. 5/32" $0.230 $2.299 $ /5 NK GALV. 3/16" $0.234 $2.338 $ /6 NK GALV. 1/4" $0.239 $5.727 $ /8 NK GALV. 5/16" $0.261 $5.480 $ /10 NK GALV. 3/8" $0.284 $5.116 $ /12 NK GALV. 1/2" $0.331 $4.962 $ /14 NK GALV. 9/16" $0.353 $5.296 $ /16 NKS HARD 5/8" $0.540 $6.483 $ /6 NR STAINLESS 304* 1/4" $1.270 $ $ /8 NR STAINLESS 304* 5/16" $1.380 $ $ /10 NR STAINLESS 304* 3/8" $1.657 $ $ /12 NR STAINLESS 304* 1/2" $1.823 $ $ BLACK Staples are available as special order item. *SS CAN BE PURCHASED BY THE BOX. SS GRADE: Series - 1/2" Crown - Staplers - 20 Gauge (Made in Germany) / $ $ Type Staple - Max 5/8" Leg /16-420S $ $ Type Staple - Max 5/8" Leg - W/Safety /16-400LM $ $ Type Staple - Max 5/8" Leg - Long Mag /16-429LN $ $ Type Staple - Max 5/8" Leg - Long Nose /16-400OC $ $ Type Staple - Max 5/8" Leg - Outward Clinch /14-450A $ $ Type Staple - Max 9/16" Leg - Automatic /14-450ALM $ $ Type Staple - Max 9/16" Leg - Automatic Long Mag /25-559LM $ $ Type Staple - Max 1" Leg - Long Mag /16-419P $ $ Type Staple - Max 5/8" Leg - Plier / (Contact actuation)**** $1, $1, Series Clinching Unit Bench-Mounted / (Foot pedal)**** $1, $1, Series Clinching Unit Bench-Mounted BeA 97 SERIES - 3/16" CROWN - 20GA (galv. resin-coated) Interchange: Stanley-Bostich BA97, JK690 Item # leg $/m /10 NK HZ 3/8" $0.267 $3.470 $ /12 NK HZ 1/2" $0.313 $6.501 $ /14 NK HZ 9/16" $0.355 $6.466 $ /16 NK HZ 5/8" $0.366 $5.706 $ /19 NK HZ 3/4" $0.425 $5.520 $ /22 NK HZ 7/8" $0.448 $3.498 $ /25 NK HZ 1" $0.545 $5.671 $ Series 3/16" Crown - Staplers - 20 Gauge (Made in Germany) / $ $ Type Staple - Max 5/8" Leg / $ $ Type Staple - Max 1" Leg /25-550S $ $ Type Staple - Max 1" Leg - W/Safety /25-530LM $ $ Type Staple - Max 1" Leg - Long Mag ****=Special Order 2
4 90 series (18 ga. 1/4" cr.) 95 series (20 ga. 1/2" cr.) BeA 95 SERIES - 1/2" CR FLAT - 20 GA Interchange: DF5000 Item # leg $/m /6 NK GALV. Interchanges to: DF5008 1/4" $0.231 $1.154 $ /8 NK GALV. Interchanges to: DF5010 5/16" $0.269 $1.344 $ /10 NK GALV. Interchanges to: DF5012 3/8" $0.300 $1.501 $ /12 NK GALV. Interchanges to: DF5016 1/2" $0.334 $1.672 $ /14 NK GALV. Interchanges to: DF5018 9/16" $0.383 $1.914 $ /10 NR STAINLESS 304* 3/8" $1.917 $9.586 $ /12 NR STAINLESS 304* 1/2" $2.075 $ $ *SS CAN BE PURCHASED BY THE BOX. SS GRADE: Series 1/2" Crown - Staplers - 20 Gauge - Flat Wire (Made in Germany) / $ $ Type Staple - Max 5/8" Leg /16-425S $ $ Type Staple - Max 5/8" Leg - W/Safety /14-455AL $ $ Type Staple - Max 9/16" Leg - Automatic Long Mag /16-418P $ $ Type Staple - Max 5/8" Leg - Plier /16-418PL $ $ Type Staple - Max 5/8" Leg - Plier - Long Mag /16-414L**** $ $ Type Staple - Max 5/8" Leg - Sisal Plier (wide opening) long magazine Medium Wire 18 gauge BeA 90 SERIES - 1/4" CR. 18 GA Interchange: DF1800, JK782, Senco L Item # leg $/m /12 NK HZ Interchanges to: L08 1/2" $0.571 $2.855 $ /15 NK HZ Interchanges to: L10 5/8" $0.605 $3.027 $ /18 NK HZ Interchanges to: L11 3/4" $0.709 $3.543 $ /21 NK HZ Interchanges to: L12 7/8" $0.758 $3.790 $ /25 NK HZ Interchanges to: L13 1" $0.887 $4.436 $ /28 NK HZ Interchanges to: L14 1 1/8" $0.971 $4.855 $ /32 NK HZ Interchanges to: L15 1 1/4" $1.088 $5.441 $ /32 NK H HZ GALV. (HARDENED) 1 1/4" $1.480 $7.400 $ Interchanges to: L /38 NK HZ Interchanges to: L17 1 1/2" $1.309 $6.547 $ Series 1/4" Crown Staplers - 18 Gauge (Made in Germany) / $ $ Type Staple - Max 1" Leg /25-552LM $ $ Type Staple - Max 1" Leg - Long Mag / $ $ Type Staple - Max 1 1/4" Leg /32-611LM $ $ Type Staple - Max 1 1/4" Leg - Long Mag / $ $ Type Staple - Max 1 1/2" Leg / $ $ Type Staple - Max 1 5/8" Leg ****=Special Order 3
5 BeA Material Codes 92 series (18 ga. 5/16" cr.) SX5035 (18 ga. 7/32" cr.) BOSTITCH SX SERIES: 18 gauge, 7/32" CROWN (galv. resin-coated) Item # leg $/m SX5035 5/8G 5/8" $0.570 $2.850 $ SX5035 3/4G 3/4" $0.664 $3.320 $ SX5035 7/8G 7/8" $0.756 $3.780 $ SX5035 1G 1" $0.887 $4.436 $ SX /8G 1-1/8" $0.927 $2.782 $ SX /4G 1-1/4" $1.081 $3.242 $ SX /8G 1-3/8" $1.173 $3.518 $ BeA 92 SERIES - 5/16" CROWN - 18GA (galv. resin-coated) Interchange: Stanley-Bostitch SL5035 Item # leg $/m /09 NK HZ 3/8" $0.604 $3.021 $ /12 NK HZ 1/2" $0.619 $5.203 $ /15 NK HZ 5/8" $0.740 $5.328 $ /18 NK HZ 3/4" $0.808 $4.845 $ /25 NK HZ 1" $1.056 $3.803 $ /25 low tensile recommended for all 1" $1.133 $4.079 $ mattress/bedding applications /32 NK HZ 1 1/4" $1.309 $4.713 $ Series 5/16" Crown Staplers - 18 Gauge (Made in Germany/USA) / $ $ Type Staple - Max 1" Leg /25-553S $ $ Type Staple - Max 1" Leg - W/Safety 92/ flaring tools for mattress and bedding applications: /25-553F $ $ /25-553FC $ $ (Dial) /25-553FCS 92 Type Staple - Max 1" Leg - $ $ (Dial, w/safety) Flaring Tool. Dial adjustment, safety/contact trip Conversion Kit Contact Trip $ /25-553F to 92/25-553FCS (contact trip) Conversion Kit Trigger $ /25-553F to 92/25-553FC (trigger) BeA recommends the use of 92/25 low tensile ( ) staples for optimal performance in 92/ flare tools /32-632S $ $ Type Staple - Max 1" Leg - Flaring Tool. Screw adjustment 92 Type Staple - Max 1" Leg - Flaring Tool. Dial adjustment, trigger fire 92 Type Staple - Max 1 1/4" Leg - Quick Clear Nose/Safety /32-612LM $ $ Type Staple - Max 1" Leg - Long Mag /40-712**** $ $ Type Staple - Max 1 5/8" Leg Code BK NK NK HZ NK H NKS NK H HZ FV VZ LM NR KU MS Bright Steel galvanized Steel galvanized, resin-coated Steel galvanized, hardened Steel galvanized, case hardened Steel galvanized, extra hardened hot-dipped galvanized electro galvanized Aluminum stainless steel. Grade 304 copper brass ****=Special Order 4
6 16 series (16 ga. 7/16" cr.) 14 series (17 ga. 7/16" cr.) Heavy Wire 17 gauge BeA 14 SERIES - 7/16" CROWN - 17GA (galv. resin-coated) Interchange: Stanley-Bostitch 17S5, Senco O Item # leg $/m /18 NK HZ 3/4" $1.026 $32.01 $ /21 NK HZ 7/8" $1.144 $31.23 $ /25 NK HZ 1" $1.268 $29.68 $ /28 NK HZ 1 1/8" $1.381 $32.32 $ /30 NK HZ 1 3/16" $1.480 $34.63 $ /32 NK HZ 1 1/4" $1.568 $15.68 $ /38 NK HZ 1 1/2" $1.754 $17.54 $ /45 NK HZ 1 3/4" $2.063 $20.63 $ /50 NK HZ 2" $2.311 $23.11 $ /16 Series 7/16" Crown Staplers - 16/17 Gauge (Made in Germany) / $ $ Type Staple - Max 1 1/4" Leg No Sag Clip Attachment front-magnet $ Magnet-holder front-nose for No Sag clips (14/32-613) No Sag Clip Attachment rear-magnet $ Magnet-holder back-nose for No Sag clips (14/ stapler) Rapid Clip Attachment w/safety $ Attachment for Rapid Clips w/safety (14/ stapler) / $ $ & 16 Type Staple - Max 1 5/8" Leg 14/ replace with 14/50-785C $ $ & 16 Type Staple - Max 2" Leg for increased performance /40-770C $ $ & 16 Type Staple - Max 1 5/8" Leg /50-785C $ $ & 16 Type Staple - Max 2" Leg /65-830C**** $ $ & 16 Type Staple - Max 2 1/2" Leg Heavy Wire 16 gauge BeA 16 SERIES - 7/16" CROWN - 16GA (galv. resin-coated) Interchange: Stanley-Bostitch 16S5, Senco N Item # leg $/m /19 NKS HARDENED*** 3/4" $2.529 $25.29 $ /19 NK HZ 3/4" $1.120 $11.20 $ /22 NK HZ 7/8" $1.255 $12.55 $ /25 NK HZ 1" $1.387 $13.87 $ /28 NK HZ 1 1/8" $1.517 $15.17 $ /32 NK HZ 1 1/4" $1.703 $17.03 $ /38 NK HZ 1 1/2" $1.902 $19.02 $ /45 NK HZ 1 3/4" $2.233 $22.33 $ /50 NK HZ 2" $2.624 $26.24 $ /16 Series 7/16" Crown Staplers - 16/17 Gauge (Made in Germany) / $ $ Type Staple - Max 1 1/4" Leg No Sag Clip Attachment front-magnet $ Magnet-holder front-nose for No Sag clips (14/32-613) No Sag Clip Attachment rear-magnet $ Magnet-holder back-nose for No Sag clips (14/32-613) Rapid Clip Attachment w/safety $ Attachment for Rapid Clips w/safety (14/ stapler) / $ $ & 16 Type Staple - Max 1 5/8" Leg 14/ replace with 14/50-785C $ $ & 16 Type Staple - Max 2" Leg for increased performance /40-770C $ $ & 16 Type Staple - Max 1 5/8" Leg /50-785C $ $ & 16 Type Staple - Max 2" Leg /65-830C**** $ $ & 16 Type Staple - Max 2 1/2" Leg ****=Special Order 5
7 P series (16 ga. 1" cr.) 145 series (16 ga. 1" cr.) 16S4 (16 ga. 1/2" cr.) BOSTITCH 16S4-1/2" CROWN - 16GA (galv. resin-coated) Item # leg $/m S4-22G 7/8" $1.267 $12.67 $ S4-25G 1" $1.403 $14.03 $ S4-28G 1 1/8" $1.554 $15.54 $ S4-32G 1 1/4" $1.726 $17.26 $ S4-34G 1 3/8" $1.771 $17.71 $ S4-38G 1 1/2" $1.974 $19.74 $ S4-41G 1 5/8" $2.087 $20.87 $ S4-44G 1 3/4" $2.280 $22.80 $ S4-50G 2" $2.666 $26.66 $ Wide-Crown 16 gauge BeA 145 SERIES - 1" CROWN - 16GA (galv. resin-coated) Interchange: Stanley-Bostitch 16S2 Item # leg $/m /16 NK HZ 5/8" $1.376 $13.76 $ /19 NK HZ 3/4" $1.524 $15.24 $ /22 NK HZ 7/8" $1.628 $16.28 $ /25 NK HZ 1" $1.753 $17.53 $ /32 NK HZ 1 1/4" $2.155 $21.55 $ /38 NK HZ 1 1/2" $2.286 $22.86 $ Series 1" Crown Staplers - 16 Gauge (Made in Germany) / Roofing $ $ / Lathing $ $ Type Staple - Max 1 1/4" Leg. Carbide nose inserts for roofing applications. 145 Type Staple - Max 1 1/4" Leg Glide shoe for lathing/stucco applications. P SERIES - 1" CROWN - 16GA (galv. resin-coated) Interchange: DF1700 Item # leg $/m P10 5/8" $1.494 $ $ P11 3/4" $1.591 $ $ P13 1" $2.056 $ $ P15 1 1/4" $2.103 $ $ New generation of BeA heavy-wire tools: -Made in Germany -high speed -light weight but well-balanced -rotate-able exhaust -quick-clear nose -quick reload feature Available for: 14/16 series: 14/40-770C 14/16 series: 14/50-785C (replaces 14/50-780C) 180 series: 14/65-830C ****=Special Order 6
8 246 series (14 ga. 1 1/8" cr) 180 series (15 ga. 7/16" cr.) BCS 15 series (15.5 ga, 1/2" cr.) Heavy Wire 15.5 gauge BCS 15 SERIES - 1/2" CROWN GA (galv. resin-coated) Interchange: SB BCS15 Item # leg $/m BCS 1512**** 1 1/2" $3.627 $18.14 $ BCS 1514**** 1 3/4" $3.807 $19.04 $ BCS " $4.000 $20.00 $ **** BCS 1512 and 1514 SPECIAL ORDER. MOQ: 1 skid Heavy Wire 15 gauge BeA 180 SERIES - 7/16" CROWN - 15GA (galv. resin-coated) Interchange: DF 1500, Senco Q Item # leg $/m /38 NK HZ 1 1/2" $2.961 $29.61 $ /45 NK HZ 1 3/4" $3.439 $34.39 $ /50 NK HZ 2" $3.858 $19.29 $ /55 NK HZ 2 1/4" $4.228 $21.14 $ /63 NK HZ 2 1/2" $4.361 $21.80 $ Series 7/16" Crown Staplers - 15 Gauge (Made in Germany) /65-835C $ $ Type Staple - Max 2 1/2" Leg Wide-Crown 14 gauge BeA 246 SERIES - 1 1/8" CROWN - 14GA (galv. resin-coated) Item # leg $/m /130 NK HZ 5 3/8" $ $41.75 $ Series 1 1/8" Crown Staplers - 14 Gauge (Made in Germany) - SPECIAL ORDER / E**** $ $ Type Staple - Max 5 3/8" Leg Minimum Advertised Pricing (MAP) Please note that we are introducing MA- pricing with this price-book. At this time, only tools are affected by this, please note MA-prices in the column: MAP For the full policy, please visit: ****=Special Order 7
9 BeA Coil -Nailers BeA Skater BeA SkaterSemi-Automatic tool for wall-panel applications Tool and accessories need to be ordered individually SPECIAL ORDER Skater Base Unit: **** $3, Base Unit: equip with any of the three tools below / Skater:**** $ and 16 series up to 2 1/2" / Skater:**** $ series up to 2 1/2" DC Skater:**** $ coil nails: (2 3/8" - 3 3/16") Edge guide with rollers**** $ for operation with extendable guide Walking stick**** $ for upright operation Edge ruler (3mm)**** $ Edge ruler (3.5mm) $ BeA Coil-Nailers **while supplies last** DC roofing-nailer $ DC $ DC $ DC $ wire collated-roofing nails.120 3/4" - 1 3/4" wire collated coil nails /4" - 2 1/4" wire collated coil nails /4" - 2 3/4" wire collated coil nails " - 3 1/2" BeA Skater: Convenient semi-automatic tool for wall-panel applications. The photo shows the skater base unit, equipped with a 180 series tool, walking stick and edge guide with rollers. The new BeA Skater tool, allows fasteners to be driven consistently and accurately in all wall-panel, shed-building and similar applications. The optional extended handle makes the tool an option for job-site applications as well. Pushing or pulling the tool across the work-surface actuates the tool in pre-set distances to deliver a consistent, accurate and quick result, without the cost associated with fully automating a facility. Two handles allow the tool to be moved over the work-surface. One handle extends allowing the tool to be pulled/pushed over larger distances, making the work much more comfortable for the operator. The solid construction and alignment guide allow for straight movement enhanced by four non-marking wheels. The optional handle-extension allows the tool to be operated by a single operator, while walking on top of the work-surface. The distance between shots is easily adjustable with a simple push-button mechanism. The comprehensive safety-mechanism does not allow the tool to be shot when lifted off the table. Single shots close to the edge can be fired, even without the tool being in motion. Both handles are equipped with a doubletrigger, eliminating accidental shots. The tool is height adjustable to guarantee consistent fastening results. ****=Special Order 8
10 A11/ T-50 SB5019 STCR 5019 Misc. Staples BOSTITCH STCR5019 TYPE - 7/16" POWERCROWN-20GA. (galv.) Item # leg $/m STCR /4" NK 1/4" $0.204 $1.018 $ STCR /16" NK 5/16" $0.228 $1.139 $ STCR /8" NK 3/8" $0.256 $1.279 $ STCR /2" NK 1/2" $0.297 $1.483 $ STCR /16" NK 9/16" $0.339 $1.697 $ BOSTITCH SB5019 TYPE - 1/2" CROWN-20 GA. (galv.) Interchange: Senco F, Paslode PW50 Item # leg $/m SB /4" NK 1/4" $0.339 $1.697 $ SB /8" NK 3/8" $0.368 $1.841 $ SB /2" NK 1/2" $0.392 $1.962 $ RAPID A-11 ; ARROW T-50 3/8" CROWN (galv.) Item # leg $/m A11-6 1/4" NK 1/4" $0.180 $0.902 $ A11-8 5/16" NK 5/16" $0.213 $1.065 $ A /8" NK 3/8" $0.252 $1.260 $ A /2" NK 1/2" $0.283 $1.414 $ RAPID A-11 ; ARROW T-50 Hammer-Tacker HT11 Hammer-Tacker $ A11 Hammer-Tacker 1/4" - 3/8" in retail packaging BeA HT11 Hammer- Tacker: Simple to use Hammer- Tacker in appealing retailpackaging. For A11/P50 type fasteners up 3/8" $18.50/unit ****=Special Order 9
11 Curved Anvils Plier staples SB Plier staples JK779 Plier staples JK777 Plier Staples JK 777 TYPE PLIER STAPLES - 1/2" CROWN Item # leg $/m JK KU 3/8" $1.314 $3.154 $ JK KU 1/2" $1.477 $3.546 $ JK KU 5/8" $1.749 $4.197 $ JK777 Type plier stapler AT-SP Plier Stapler w/ straight anvil $ $ P50 tools are equipped with air-flow adjustment valve. JK 777 Staple - 3/8", 1/2", 5/8" Leg JK 779 TYPE PLIER STAPLES - 1/2" CROWN Item # leg $/m JK NK 3/8" $0.598 $2.988 $ JK NK 1/2" $0.702 $3.511 $ JK NK 5/8" $0.790 $3.948 $ JK779 Type plier stapler AT-SP Plier Stapler w/ straight anvil $ $ P50 tools are equipped with air-flow adjustment valve. JK 779 Staple - 3/8", 1/2", 5/8" Leg BOSTITCH SB TYPE PLIER - 1/2" CROWN Item # leg $/m SB /8 NK 3/8" $1.358 $3.259 $ SB /2 NK 1/2" $1.441 $3.459 $ SB /8 NK 5/8" $1.594 $3.825 $ Bostitch Type P50-10B Plier Stapler AT-P50-10B Plier Stapler w/ straight anvil $ $ P50 tools are equipped with air-flow adjustment valve. SB Staple - 3/8", 1/2", 5/8" Leg Curved anvils for P50 style plier tools (SB103020, JK777, JK779) Item # Model Unit Price Curved anvil RIGHT for all P50 type tools $ Curved anvil LEFT for all P50 type tools $66.00 Call to order Call to order ****=Special Order 10
12 C Series: Stick Carton-Closing A Series: Stick Carton-Closing Carton Closing A SERIES CARTON CLOSING - 1 3/8" Crown Interchange: Stanley-Bostitch BA, Fasco EJ1xCC, ISM A, JK 560, Klich-Pak K-A, Prebena B Item # leg $/m A 5/8 5/8" $1.654 $3.308 $ A 3/4 3/4" $1.783 $3.566 $ A 7/8 7/8" $2.068 $4.136 $ Manual Stick Carton Closing Tools MT-A18 $93.00 $ MT-A22 $93.00 $ Pneumatic Stick Carton Closing Tools AT-A18 $ $ AT-A22 $ $ Manual Post & Side Arm Bottomers (No UPS shipment possible, LTL only) MT-PB-A22 $ $ MT-SB-A22 $ $ Manual: A Type Staple - Adjustable - 5/8", 3/4" Leg Manual: A Type Staple - Adjustable - 3/4", 7/8" Leg Pneumatic: A Type Staple - Adjustable - 5/8", 3/4" Leg Pneumatic: A Type Staple - Adjustable - 3/4", 7/8" Leg Manual Post Bottomer: A Type Staple - Adjustable - 5/8", 3/4", 7/8" Leg Manual Side-Arm Bottomer: A Type Staple - Adjustable - 5/8", 3/4", 7/8" Leg Pneumatic Post & Side Arm Bottomers (No UPS shipment possible, LTL only) AT-PB-A22 $ $ AT-SB-A22 $ $ Pneumatic Post Bottomer: A Type Staple - Adjustable - 5/8", 3/4", 7/8" Leg Pneumatic Side-Arm Bottomer: A Type Staple - Adjustable - 5/8", 3/4", 7/8" Leg C SERIES CARTON CLOSING - 1 1/4" Crown Interchange: Stanley-Bostitch BC, Haubold RL, ISM C, JK 561, Klich-Pak K-C, Prebena R Item # leg $/m C 5/8 5/8" $1.392 $2.784 $ C 3/4 3/4" $1.510 $3.020 $ Manual Stick Carton Closing Tools MT-C18 $93.00 $ Pneumatic Stick Carton Closing Tools AT-C18 $ $ Manual Post & Side Arm Bottomers (No UPS shipment possible, LTL only) MT-PB-C22 $ $ MT-SB-C22 $ $ Manual: C Type Staple - Adjustable - 5/8", 3/4" Leg Pneumatic: C Type Staple - Adjustable - 5/8", 3/4" Leg Manual Post Bottomer: C Type Staple - Adjustable - 5/8", 3/4" Leg Manual Side-Arm Bottomer: C Type Staple - Adjustable - 5/8", 3/4" Leg Pneumatic Post & Side Arm Bottomers (No UPS shipment possible, LTL only) AT-PB-C22 $ $ AT-SB-C22 $ $ Pneumatic Post Bottomer: C Type Staple - Adjustable - 5/8", 3/4" Leg Pneumatic Side-Arm Bottomer: C Type Staple - Adjustable - 5/8", 3/4" Leg ****=Special Order 11
13 SWC Series: Roll Carton-Closing RR Series: Roll Carton- Closing GR Series: Roll Carton-Closing ISM ROLL STAPLES - GR 1 1/4" CROWN Interchange: Fasco EIGR ISM GR,JK K-GR, Klich-Pak K-GR Item # leg $/m GR1 58 5/8" $2.334 $42.01 $ GR1 34 3/4" $2.482 $44.68 $ GR5 58 5/8" $2.561 $51.22 $ Pneumatic Roll Staple Carton Closing Tools CT-IC-1823 $ $ CT-IC-2223 $ $ Bench-mounted Pneumatic Roll Staple Carton Closing Tools (2 week lead time) BEGR Bench-Mounted, contact trip $ $ GR1 Type Staple - Adjustable - 5/8", 3/4" Leg GR1 Type Staple - Adjustable - 3/4", 7/8" Leg GR1 Type Staple - Adjustable - 5/8", 3/4" Leg ISM ROLL STAPLES - RR 1 1/4" CROWN Interchange: Fasco EIRR, ISM RR,JK K-RR, Klich-Pak K-RR Item # leg $/m RR1 58 5/8" $2.271 $40.88 $ RR1 34 3/4" $2.406 $43.31 $ Pneumatic Roll Staple Carton Closing Tools CT-IC-1819 $ $ Bench-mounted Pneumatic Roll Staple Carton Closing Tools (2 week lead time) BERR Bench-Mounted, contact trip $ $ RR1 Type Staple - Adjustable - 5/8", 3/4" Leg RR1 Type Staple - Adjustable - 5/8", 3/4" Leg BOSTITCH SWC 7437 ROLL STAPLES /32" CROWN GALV. Interchange: Stanley-Bostitch SWC 7437, Fasco ESWC7437, Klinc-Pak K-SWC7437 Item # leg $/m SWC7437-1/2" - 1M 1/2" $2.065 $49.57 $ SWC7437-5/8" - 1M 5/8" $2.212 $53.08 $ SWC7437-3/4" - 1M 3/4" $2.459 $59.01 $ SWC7437-1/2" - 4M 1/2" $2.065 $49.57 $ SWC7437-5/8" - 4M 5/8" $2.212 $53.08 $ SWC7437-3/4" - 4M 3/4" $2.459 $59.01 $ Pneumatic Roll Staple Carton Closing Tools CT-SC-18 $ $ SWC7437 Staple - Adjustable - 1/2", 5/8", 3/4" Bench-mounted Pneumatic Roll Staple Carton Closing Tools (2 week lead time) BESWC Bench-Mounted, contact trip $ $ SWC7437 Staple - Adjustable - 1/2", 5/8", 3/4" ****=Special Order 12
14 Specialty Corrugated Fasteners Corrugated Fasteners BeA WM MINI CORRUGATED FASTENERS 3/4" CROWN (bright) Item # leg $/m WM6 BK 1/4" $4.637 $4.452 $ WM9 BK 3/8" $5.100 $58.75 $ WM12 BK 1/2" $5.796 $50.08 $ WM Series Mini Corrugated Tool - 3/4" Crown (Made in Germany) WM $ $ BeA W CORRUGATED FASTENERS 1" CROWN (bright) Interchange: Senco X, Stanley-Bostitch W, ISM CF, Prebena WN WM Corrugated Fastener - Max 1/2" Leg Item # leg $/m W9 BK 3/8" $5.653 $52.06 $ W12 BK 1/2" $6.547 $45.24 $ W15 BK 5/8" $8.170 $42.32 $ W Series Standard Corrugated Tool - 1" Crown (Made in Germany) W $ $ W Corrugated Fastener - Max 5/8" Leg Specialty Fasteners Shelf Support Studs (BT77) Item # leg $/m BT77-12 Brown shelf-support studs 1/2" $ $ $ P8 composite staples. Special Order, one case MOQ Interchange: Omer 83P, RaptorNails SH/04-40 Item # leg $/m P8/10 composite staple**** 3/8" $7.750 $ $1, P8/15 composite staple**** 5/8" $7.840 $ $1, P8 composite staple tools (Made in Germany). SPECIAL ORDER P8/16-428**** $ ZN90/65 collated decorative tacks for upholstery, shoes. SPECIAL ORDER P8-type plastic staples Item # leg $/m ZN90 (3/8" width) for tool ZN BRASS (MOQ: 4 cs)**** ZN90 (3/8" width) for tool ZN BRONZE-FADED (MOQ: 4 cs)**** ZN90 (3/8" width) for tool ZN NICKEL (MOQ: 1 cs)**** 9/16" $ $ $ /16" $ $ $ /16" $ $ $ ZN65/100 specialty tools (Made in Germany/Italy). SPECIAL ORDER ZN deco-tack nailer**** $ ZN90 deco tack nailer (3/8" tack width) ****=Special Order 13
15 T-Nailers Hartco/Vertex Clip Tools Hog-Rings U-Crown 150/19 U-Crown Staples/Hog-RingsClip Tools/T-Nailers U-Crown Staples 150/19 (galv. resin-coated) Interchange: Stanley-Bostitch BCS 31 Item # leg $/m /19 NK HZ V-Cut (gold, glue collated) 3/4" $1.770 $53.90 $ /19 NK HZ V-Cut (blue- high holding power, 3/4" $1.770 $53.90 $ glue collated) /19 NK HZ V-Cut**** (gold, tape collated) SPECIAL ORDER 3/4" $2.123 $64.65 $ /19 (BCS 31) U-Crown Series Tool MS31-193S $ $ MS $ $ BCS31 150/19 U-Crown Tool SINGLE SHOT BCS31 150/19 U-Crown Tool DOUBLE SHOT BOSTITCH TYPE HOG RINGS (galv.)-15ga. Item # Ring Size $/m SR15D D RING SHARP GALV. 3/4" $1.682 $16.82 $ G100 C RING SHARP GALV. 3/4" $2.065 $20.65 $ G100 C RING BLUNT GALV. 3/4" $2.119 $21.19 $ G C & D Hog Ring Tool HR60-22 $ $ CL-24 $ $ Hartco /Vertex Type Clip Tools M-66 $ ECLIPSER $ ECLIPSER $ ECLIPSER (MOD 66) $ ECLIPSER $ ECLIPSER $ ECLIPSER $ HANGER FOR ECLIPSER 2000 $ ECLIPSER $ ECLIPSER $ ECLIPSER 2800 STAND $ G D Hog Ring Tool 15G C Hog Ring Tool CLP-3, CLP-4 and CLP-34 type clips CLP-23, CLP-24, CLP-2312, CLP-2412 type clips CLP-24 - SPECIAL, type clips CLP-3, CLP-312, CLP-4, CLP-412, type clips CLP-34, type clips CLP-36, type clips CLP-38, type clips CCP-13, CCP-26, 71A18R, 76A18R, 85A18R CCP-32, CCP-33, 85A22R, 88A22R Includes stand, balancer, regulator, hoses and track T-Nailers (Made in Germany) BEA-NAGLER T25-155**** $ $ T-Nailer - up to 1" T T Nailer**** $ $ T-Nailer - 1" to 2 1/8" Nails ****=Special Order 14
16 Pins 18 ga. (S100) Pins 23 ga. (S700) Pins/Brads/Finish-Nails HEADLESS PINS - 23 GA BeA S700 (can be ordered by the box) Item # leg $/m S710NK* (while supplies last, replacement 3/8" $0.362 $4.343 $ below) S712NK* (while supplies last, replacement 1/2" $0.378 $4.537 $ below) S710NK* 3/8" $0.362 $3.620 $ S712NK* 1/2" $0.378 $3.781 $ S714NK* 9/16" $0.397 $3.971 $ S717NK* 11/16" $0.408 $4.076 $ S719NK* 3/4" $0.456 $4.560 $ S722NK* 7/8" $0.502 $5.016 $ S725NK* 1" $0.593 $5.928 $ S728NK* 1 1/8" $0.637 $6.365 $ S730NK* 1 3/16" $0.656 $6.555 $ S732NK* 1 1/4" $0.675 $6.755 $ S735NK* 1 3/8" $0.723 $7.230 $ S738NK* 1 1/2" $0.804 $8.037 $ S740NK* 1 5/8" $0.818 $8.180 $ S745NK* 1 3/4" $0.941 $9.405 $ S750NK* 2" $1.083 $ $ *S700 SERIES PINS CAN BE PURCHASED BY THE BOX 700 Series Pin Nailers- 23 Gauge - Headless Pinner S $ $ Series Headless Pins - Max 11/16" Leg. Made in Germany HEADLESS PINS - 18 GA BeA S100 (can be ordered by the box) Item # leg $/m S114NK* 9/16" $0.342 $1.710 $ S116NK* 5/8" $0.403 $2.014 $ S119NK* 3/4" $0.467 $2.337 $ S122NK* 7/8" $0.547 $2.736 $ S125NK* 1" $0.593 $2.964 $ *S100 SERIES PINS CAN BE PURCHASED BY THE BOX 100 Series Pin Nailers- 18 Gauge - Headless Pinner S $ $ Series Headless Pins - Max 1" Leg. Made in Germany BeA SKDA Powerful nailer for 34 deg. 15. ga DA-type brads up to 2 1/2" $145.00/unit ****=Special Order 15
17 DA Brads 15 ga. 34 deg. (SKDA600) Finish Nails/Brads 16 ga. (SK400) Brads 18 ga. (SK300) BRADS - 18 GA BeA SK300 (can be ordered by the box) Item # leg $/m SK310NK* 3/8" $0.250 $1.251 $ SK312NK* 1/2" $0.263 $1.314 $ SK315NK* 5/8" $0.324 $1.620 $ SK320NK* 3/4" $0.342 $1.710 $ SK322NK* 7/8" $0.367 $1.836 $ SK325NK* 1" $0.410 $2.052 $ SK328NK* 1 1/8" $0.470 $2.349 $ SK330NK* 1 3/16" $0.490 $2.448 $ SK332NK* 1 1/4" $0.529 $2.646 $ SK335NK* 1 3/8" $0.569 $2.844 $ SK338NK* 1 1/2" $0.621 $3.105 $ SK345NK* 1 3/4" $0.749 $3.744 $ SK350NK* 2" $0.833 $4.167 $ *SK300 SERIES BRADS CAN BE PURCHASED BY THE BOX SK300 Series Bradder - 18 Gauge SK $ $ SK $ $ SK C $69.00 $79.00 SK300 Series Brads - Max 1" Leg. Made in Germany SK300 Series Brads - Max 1 1/2" Leg. Made in Germany SK300 Series Brads - Max 2" Leg FINISH NAILS/BRADS - 16 GA BeA SK400 (can be ordered by the box) Item # leg $/m SK419NK* 3/4" $0.623 $3.114 $ SK425NK* 1" $0.740 $3.699 $ SK432NK* 1 1/4" $0.909 $4.545 $ SK438NK* 1 1/2" $1.062 $5.310 $ SK445NK* 1 3/4" $1.181 $5.904 $ SK450NK* 2" $1.265 $6.327 $ SK457NK* 2 1/4" $1.602 $8.010 $ SK464NK* 2 1/2" $1.780 $8.901 $ *SK400 SERIES FINISH NAILS CAN BE PURCHASED BY THE BOX SK400 Series Finish Nailer - 16 Gauge SK $ $ SK $ $ SK C $ $ SK400 Series Finish Nails - Max 1 3/4" Leg. Made in Germany SK400 Series Finish Nails - Max 2" Leg. Made in Germany SK400 Series Finish Nails - Max 2 1/2" Leg DA BRADS - 15 GA 34 degree BeA SKDA600 (can be ordered by the box) Item # leg $/m DA15 (SKDA 632NK*) 1 1/4" $3.681 $ $ DA17 (SKDA 638NK*) 1 1/2" $3.817 $ $ DA19 (SKDA 644NK*) 1 3/4" $4.233 $ $ DA21 (SKDA 650NK*) 2" $4.475 $ $ DA 25 (SKDA 663NK*) 2 1/2" $5.763 $ $ *SKDA600 BRADS CAN BE PURCHASED BY THE BOX SKDA600 Series Angled Finish Nailer (34 deg.) 15 ga SKDA $ $ SKDA600 Series - Max 2 1/2" Leg. ****=Special Order 16
18 Hartco/Vertex Type Clips (Metal) BaaN Clip Size Replaces $ per M $ per Roll/Box Clips/Roll Rolls - Boxes Clips/ LBS/ LBS/ Roll Clips/Box (M) per Skid Skid (M) PALLET A18SG CLP-15G $ 4.00 $ ,040 71A18R CCP-13 $ 2.88 $ , A18S CLP-13 $ 2.88 $ ,040 72E18S CLP-20 $ 4.13 $ , F18S CLP-2312, CLP-73 $ 4.50 $ ,960 74F18SC CLP-2312C, CLP-73C $ 5.88 $ , H18S CLP-23 $ 5.50 $ ,120 74H18SC CLP-23C $ 6.25 $ ,120 76A22R $ 3.06 $ ,624 76A22S $ 3.06 $ , F23S CLP-71 or CLP312 $ 4.88 $ , H23S CLP-3 $ 5.56 $ ,960 80H23SC CLP-3C $ 6.63 $ ,960 85A22R CCP-33 $ 3.20 $ ,960 85A22S CLP-33 $ 3.20 $ ,960 88A22R CCP-32 $ 3.25 $ ,248 88A22S CLP-32 $ 3.25 $ ,120 88F23R CCP-72 $ 5.25 $ ,768 88F23S CLP-72 $ 5.25 $ , H23S CLP-4 $ 6.06 $ ,880 90A29SG $ 8.44 $ ,528 90F18R CCP-74 $ 5.75 $ ,720 90F18S CLP-74 $ 5.75 $ ,040 90H18R CCP-24 $ 7.00 $ , H18S CLP-24 $ 6.72 $ ,965 90H18SC CLP-24C $ 7.75 $ ,040 91A23S CLP-14S $ 3.94 $ ,144 91A23R CCP-14S $ 3.94 $ , F23R $ 6.75 $ , H23R CCP-34 $ 7.00 $ , H23S CLP-34 $ 7.00 $ , H23SC CLP-34C $ 8.75 $ , A18R $ 4.25 $ , A18S $ 4.25 $ , E25SS3 CLP-35SS304 $ $ E25SS4 CLP-35SS430 $ $ H25S CLP-36 $ 7.68 $ , H31S CLP-38 $ $ ,480 The product above is not stocked in our NC warehouse It ships FOB Northbrook, IL. Additional types available on request. Tool for metal clips are available. Check our tool pages for more information. NEW: AK-1EW CLIP BaaN Clip Size M/skid MOQ $ per M $ per skid AK-1-EW 30 1 skid $ $ RapidClips (composite) BaaN RapidClip For wire gauge Type $ per M $ per bag $ per skid M per bag bags per skid M per skid FW8 8 gauge (white clip) Rail Clip $ $ $ 1, VSB12 11 gauge (yellow) Back Clip $ $ $ 2, F 8 gauge (white clip) Rail Clip $ $ $ 1, VS 8 gauge (white clip) Rail/Back Clip $ $ $ 2, FWB 11 gauge (yellow) Back Clip $ $ $ 1, FBW 11 gauge (yellow) Back Clip $ $ $ 1, FB 11 gauge (yellow) Back Clip $ $ $ 2, FG Any (white) Back Clip $ $ $ 1, Shipped from our warehouse in Greensboro, NC. Additional sizes available on request. Visit for more information. Benefits RapidClip: Mounted at the center of Material Savings the frame, minimizing the length of spring required Prolonged use. No Load Carrying Capacity material wear. Certified. No Creaking Time Savings Improve Operator Safety Guaranteed: no creaking of metal springs rubbing on metal clips. Higher value Faster Installation time cuts down installation cost. No cut hands, minimize time lost to injuries BEA # TOOL MODEL # DESCRIPTION $/Unit / BeA Clip Tool and staples No Sag Clip Attachment frontmagnet No Sag Clip Attachment rearmagnet Rapid Clip Attachment w/safety 14 Type Staple - Max 1 1/4" Leg Magnet-holder front-nose for No Sag clips Magnet-holder back-nose for No Sag clips Attachment for Rapid Clips w/safety $ $ $ $ Item # $/M /19 NKS hard (3/4") $2.529 ALL PRICES ARE QUOTED FOB NORTHBROOK, IL/GREENSBORO, NC 17
19 BeA Autotec -Customized stationary tools More info at: wwww.beafastenersusa.com/autotec When it comes to stationary or repetitive fastening, the usual approach is to mount a hand-held tool by designing a mounting fixture, acquire a remotevalve and integrate the tooling into an existing system. Key issues that are created using this approach are: limited shot frequency and load volumes, as well as having to find a tool that can be reloaded given the parameters of the machine set up. BeA's German-made Autotec tools overcome these issues. The custom design allows the tools to be purpose -built. All set-up parameters such as dimensional restrictions are taken into account and the Autotec tool built to fit into the manufacturer's set up. Different magazine types afford effortless reloading, even while the tool is operating. Four engine sizes always provide adequate drive power, fastening speeds of up to 12 shots per second do not create a bottleneck as often encountered with hand-held set-ups. For full system integration, BeA's Autotec tools can be equipped with supervisory sensors to provide status feedback, such as load volumes or positive fastener placement. BeA Autotec tools are available for all BeA fasteners from pins/brads, to staples and nails. The industrial design of the tools limits service calls. For fully automatic operation, BeA offers a robotic loading station that requires no operator supervision. To find out more about BeA Autotec, please contact our Greensboro, NC office. A simple questionnaire is the first step to a comprehensive proposal. Questions that need to be answered are a general description of the application, including cycling speed, type of fastener to be used and material to be fastened. 18
20 BeA Competitive Interchange Chart BeA Gauge Crown Atro Bostitch Duo-Fast Empire Fasco Haubold Hitachi ISM JK Klinch-Pak/Complete Omer Paslode Prebena Rainco Senco Spotnails /16" 18NC (15S4) 1500 ES5xxM C-Qxx Q Q /16" S5 (7600) ES6xxM KG700 N5008AA C-Nxx L N 66 16S4 16 1/2" 16S4 C-BCS11xx S " 16WC 16S2 (1700) (EX6xxW) C-BCS1xxx WC (P) 1600 P 16 1" (16S2) 1700 ES6XXW N3823A C-PXX WS/W 150/ /8" BCS31 EBCS /16" 14 17S5 (7600) VF O /4" ES8xx KL6000 N3804A 781 C-Lxx 90 EB L 4800 SX /32" SX5035 EBSX /16" 92 SL5035 EB92xx (C-Mxx) 92 H (M) / /2" 8 BA380 8 EB8xx C A /2" (SB5019) 5000 ED5xxx C-50xx 50 AD (F) /16" 97 BA97 EB97xx 690 O (W) /8" 64 BA71 (3100) 7 EE7xx (1400) 670 C-71 V 7 C /2" EH18xx 1800 AB (B) SKDA deg. DA DA DAFN DA DA DA DA DA SK straight TIP FN1600 LFN 764 EP6xxB SKN16 NT65A 516 C-FNXX Brads 14 F16 N RX XB 1564 SK straight TI-PIN BT1300 B44 EB8xxB SKN C-BNXX Brads 12 F18 JM AX CB1820 S straight I S100/AZ555 SN20 EB8xxP Pins I GA AZ S straight MINI S700 ES2xxP ST Pins 6 AL CZ SB /2" SB5019 ES5000 AK F STCR /16" power cr. STCR5019 EB-STCR C-STCR5019 FB 82 A11/T /16" EA11 AHT-11 H SB /2" SB ESB KSB BA 91 JK /2" 11 EJ777 JK777 JK777 77K 94 JK /2" 6600 EJ779 (D90) JK779 JK C series Stick 1 1/4" C BXXC EJxxCC RL C series 561 K-Cxx 32 R CCxxC A series Stick 1 3/8" A BAXX EIxxCC A series 560 K-Axx 35 B CCxxA SW7437 Stick 1 11/32" SW7437 ESW7437 KSW7437 K-SW SW9040 Stick 1 11/32" SW9040 ESW9040 KSW L GR Roll 1 1/4" (.9x.4) EIGR1xx GR K GR K-GRxx CCGR RR Roll 1 1/4" (.74x.37) EIRR1xx RR K RR K-RRxx SWC7437 Roll 1 11/32" SWC7437 ESWC7437 K-SWC7437 Roll 34 CCBR WM Corrugated 3/4" Mini CF W Corrugated 1" CF W CF WN CF CF WN CF/X XC1016 W MAXI Corrugated 1 3/8" Jumbo WN Jumbo CF Bold items will fully interchange, items in parenthesis are similar but will not interchange We are constantly expanding our program, if you are looking for a specific item, please let us know! Bold items will fully interchange, items in parenthesis are similar but will not interchange MM to inch conversion, and competitive interchange MM inch Senco Duo-Fast MM inch Senco Duo-Fast BeA nomenclature: 2 5/ /8 x14 xx36 3 1/8 x1 xx /16 xx38 BeA's nomenclature is always stated in mm 4 5/32 x2 xx /4 x15 xx40 For instance a 71/10 has a leg length of 10mm (3/8"), a 16/50 a leg length of 50mm (2") 5 3/16 x3 xx /8 x16 xx44 6 1/4 x4 xx /2 x17 xx48 Tools: 8 5/16 x5 xx /8 x18 xx52 Our tools are numbered using the following system: 10 3/8 x6 xx /4 x19 xx56 XX/YY-ZZZ 11 7/16 x7 xx x21 xx64 XX: staple type, such as 71, 80 or /2 x8 xx /4 x23 YY: maximum leg length for the tool, such as 16 (5/8") or 50 (2") BeA Fasteners USA 14 9/16 x9 xx /8 ZZZ: specific model type, such as 421 or 780C 15 5/8 x /2 x /8 xx /4 Example: 71/ (phone) 19 3/4 x11 xx series staple, up to 16mm (5/8"), model no (fax) 22 7/8 x12 xx28 Example: 14/ info@us.bea-group.com 25 1 x13 xx32 14 type staple, up to 32mm (1 1/4"), model no, Example: Senco L13 (x13) or DF 1832 (xx32) equals, BeA 90/25 19
21 General Information All orders are subject to acceptance by corporate headquarters. Upon acceptance, orders will be acknowledged in writing. Verbal agreements are not binding unless approved by the company in writing. To open an account, insists on a minimum order of $2, All accounts with sales of less than $5, per calendar year are subject to be closed. Terms All sales to our customers are based on net thirty (30) day terms, unless otherwise noted. All prices are in USD, FOB Greensboro, NC. Orders will not be processed and released for shipment, if the account has a balance of more than 45 days or the account is over the defined credit limit. Other Terms and Conditions The terms specified herein and on our order form, acknowledgement, and invoice are the only terms by which sells merchandise. does not agree to terms and conditions stipulated on buyer s purchase order or similar documents, correspondence or statements of policies, unless written agreement is reached with the President of stipulating BeA Fasteners USA, Inc s acceptance of such terms and conditions. shall not be held liable for any consequential losses or damages resulting from any delay in shipping or delivery of product for any cause whatsoever. Returned Check and Refused Shipments reserves the right to impose a handling charge for each returned check or refused shipment. Cost of Collection If the buyer fails to pay any amount when due including service charges, buyer agrees to pay the full amount of any costs or expenses, including reasonable attorney fees incurred by in the collection of such overdue amounts by litigation or otherwise. Prices All prices are subject to change without notice. The line item prices shown on the printed invoice are the only prices honored. Verbal quotations are only estimates and are not binding. The minimum order for fasteners is one case, unless stated otherwise. Minimum Advertised Prices (MAP) Please visit for details. Shipments/Backorders All shipments will be made FOB from the warehouse (Greensboro, NC), unless noted otherwise. Orders may be shipped freight collect with your account number or will be pre-pay and add. All damages in transit MUST be noted and signed by driver AT TIME OF DELIVERY. The carrier who delivers merchandise to your door is responsible for loss and damages. All damages must be noted and filed IMMEDIATELY upon delivery. We can offer to air-freight any non-warehoused tool for a flat fee of $25.00 per tool (from Germany to BeA warehouse). Please contact BeA customer service to advise on how to handle back-orders/incomplete shipments for your account (hold unitl complete, or release immediately). Each shipment with the exception of parts will be subject to individual freight charges. Returns All returns must be approved by a BeA representative. Products returned to BeA USA without a RGA are not eligible for credit or refund. Receiving a RGA number does not warrant credit or the returned purchases, as all all returned goods must be current, unused, and in resalable condition. A credit note will not be issued unless all statements above are met. All items returned 45 days after purchase are subject to a 20% restock fee (except parts). All transportation charges must be paid by the buyer, All shipments must be made via the same method as orginally shipped by BeA USA. The same packaging principles must be applied (double boxing for parts, tools and individual cases of fasteners), shrink-wrapping and strapping for full skids. BeA does not accept collect shipments. All special order items, including Autotec tools cannot be returned for credit. All parts returns are subject to a 30% restock fee, some parts cannot be returned (as indicated by the order confirmation). All returns after are subject to approval. Parts Shipments/Minimum order Parts orders are subject to the following freight charges (from Germany to US location): Order value less than $50.00: freight $12.50 Order value more than $50.00: freight $25.00 No additional freight charge on partial shipments (back orders). For non-contiguous US locations the UPS fee from Greensboro, NC will be added to the charges stated above. We do not stock parts in the US, ordering parts on Monday will ensure their arrival in NC on Friday of that week. Parts orders ship from Germany on Wednesday, the full re-stock fee applies for cancellations after Tuesday. Unless stated otherwise, the minimum order is one case per SKU. Demo Tools provides tools for trials and demos under the following conditions: Issue a P/O for the full value of the tool. All freight charges (in- and outbound are to be paid by the distributor). Tools can be returned for full credit (less S&H) after obtaining a RGA number as long as they are returned in current and resalable condition, including packaging and manuals. Sale will be considered final after 45 days of shipment. Special Orders/Autotec In addition to the product in our price book, we can offer a vast array of special order products. However these items, including all Autotec tools are non-returnable. This applies to tools, fasteners and spare-parts. Safe Operation Except where contrary to state or federal law and its employees shall not be liable for any injury, loss or damage 20
PREBENA North American Fastener Corp.
Master Line with reference colum numbers to Master Price List 2017 7 8 10 # 12 14 11 12 13 16 19 PREBENA North American Fastener Corp. Distributor Product- and Pricelist 706 - Tools PREBENA North American
More informationTHE POWER OF FASTENING
THE POWER OF FASTENING 10/2015 Joh. Friedrich Behrens AG Industrial Fastening Systems Bogenstraße 43 45, 22926 Ahrensburg Germany Tel. +49 (0) 4102 78 281, Fax +49 (0) 4102 78 275 info@bea-group.com www.bea-group.com
More informationTHE POWER OF FASTENING
THE POWER OF FASTENING Joh. Friedrich Behrens AG Industrial Fastening Systems Bogenstraße 43 45, 22926 Ahrensburg Tel. +49 (0) 4102 78 281 Fax +49 (0) 4102 78 275 info@bea-group.com www.bea-group.com 10/2015
More informationTHE POWER OF FASTENING
THE POWER OF FASTENING Joh. Friedrich Behrens AG Industrial Fastening Systems Bogenstraße 43 45, 22926 Ahrensburg Germany Tel. +49 (0) 4102 78 444, Fax +49 (0) 4102 78 270 info@bea-group.com www.bea-group.com
More informationTHE POWER OF FASTENING
THE POWER OF FASTENING New BeA Professional Tools and Fastening Systems The complete range for distributors, craftsmen and industry BeA Service BeA Tools and s The complete range of fastening solutions
More informationPREBENA North American Fastener Corp.
Master Line with reference colum numbers to Master Price List 2017 35 36 37 # 39 12 9 10 11 19 PREBENA North American Fastener Corp. Distributor Product- and Pricelist 801 - Fasteners PREBENA North American
More informationCatalogue The complete range for distributors, craftsmen and industry
THE POWER OF FASTENING BeA Professional Tools and Fastening Systems Catalogue The complete range for distributors, craftsmen and industry New BeA Service BeA Tools and s The complete range of fastening
More informationPoplar Bluff, Missouri
Poplar Bluff, Missouri Mid Continent Nail Corporation, a division of Libla Industries Inc., began business in 1987 under the direction of owners David and Doug Libla. Initially, Mid Continent Nail focused
More informationCONSTRUCTION TOOLS CN45R B&C Eagle
TM CONSTRUCTION TOOLS CN45R 2016 B&C Eagle SN3490 33 PAPER TAPE FRAMING NAILER 3-1/2" 2" 33 2" to 3-1/2" paper tape 30-34 collated framing nails Rear load magazine / Stowable rafter hook Selectable trigger
More informationSENCO CLINCH SYSTEM STRIP CLINCH CLIP ROLL CLINCH CLIP ROLL CLINCH CLIP + BLADE JAM RELEASE MECHANISM
CLINCH CLIP SYSTEM SENCO CLINCH SYSTEM Hand-held, manually operated, lightweight pneumatic fastening tool to connect two wires together by wrapping and pressing a clip around them. Quick Release Front
More informationNails & staples for use in hand, corded and cordless tackers
Fastenings Guide Precision Years and years of experience in this field have resulted in the precision manufacturing of all Tacwise staples and nails. Produced from premium quality raw materials our exacting
More informationBrass, Bronze, Iron and Stainless Steel Valves
Price Schedule June 1, 2015 Supersedes BIV-06-11 CLASS 125 07 Brass, Bronze, Iron and Stainless Steel Valves ASTM B283 FORGED BRASS SCREW-IN BONNET NON-RISING STEM SOLID WEDGE DISC 125 WSP/200 WOG BRONZE
More informationBrass, Bronze, Iron and Stainless Steel Valves
Price Schedule January 1, 2018 Supersedes BIV-06-15 Brass, Bronze, Iron and Stainless Steel Valves 07 BRONZE GATE VALVES CLASS 125 ASTM B283 FORGED BRASS SCREW-IN BONNET NON-RISING STEM SOLID WEDGE DISC
More informationLead Free Copper Alloy Valves
Price Schedule LFV-01-19 January 1, 2019 Supersedes LFV-01-18 Lead Free Copper Alloy Valves BALL VALVES 2-Pc Body FULL PORT PLATED BALL PTFE SEATS* 600 CWP/150 WSP 014 $ 9.75 0.25 20 120 038 10.95 0.25
More information2006 PRICE LIST. PRODUCT NAME DESCRIPTION PAGE Policies Freight policy and material return policy. 1. Product Reference Table. Majestic Slate Tile
Effective June 1st 2006 PRICE LIST PRODUCT NAME DESCRIPTION PAGE Policies Freight policy and material return policy. 1 Product Reference Table Table provides weight, packaging, and installation information
More informationPipe Hangers, Strut & Accessories
I N D U S T R I E S I N C. Base Price List September 22, 2008 Pipe Hangers, Strut & Accessories Phone 800.243.4844 860.647.1431 Fax 860.647.1160 180 Olcott Street Manchester, CT 06040 w w w. e m p i r
More informationBOXES CSA 1. D BOXES CSA 1 DIMENSIONS
STEEL ALUMINUM indoor Indoor D BOXES CSA 1. D BOXES CSA 1 DIMENSIONS Ship Wt. List DIMENSIONS Ship Wt. List CAT. NO. H W D (LBS.) Price CAT. NO. H W D (LBS.) Price D-S-060603 6 6 3 2 11.80 D-A-060603 6
More informationPRICE SHEET TABLE OF CONTENTS AWWA VALVES & HYDRANTS. (PL-0418-AWWA Replaces PL-1014-VLV)
Page(s) 1 2 3 3 4 4 5 5 6 PRICE SHEET TABLE OF CONTENTS VALVES & HYDRANTS ( Replaces PL-1014-VLV) Product Line C515 NRS Gate Valves Series 1010 UL/FM C515 NRS Gate Valves Series 2010 C508 Swing Check Valves
More informationIn this booklet you will find the full range of Hatco wheel balancing weights, the prelude Hatco product.
Since 1984 Hatco has grown to become one of the most prominent tire repair and consumables manufacturers. One of its kind in Lebanon, and via continuous development for best quality, Hatco aims "at becoming
More information2015 PRODUCTS & PRICES
2015 PRODUCTS & PRICES STOPS THAT ARE USER FRIENDLY Orders 1-800-821-3491 Phone 1-717-484-0230 Fax 1-717-484-0933 E-mail mayaposi@att.net Web mayaposi-stop.com MAYA POSITIONING EQUIPMENT MFG CO. INC. 940
More informationPrice List. Specialty Products / Strainers / Check Valves / Butterfly Valves. Effective July 2, MuellerSteam.com 2018 MUELLER PRICE LIST
2018 MUELLER PRICE LIST Price List Specialty Products / Strainers / Check Valves / Butterfly Valves Effective July 2, 2018 All prices supersede previous issues, are temporary and subject to change without
More informationSpecialty Products. Strainers. Check Valves. Butterfly Valves
Specialty Products Strainers Check Valves Butterfly Valves Effective Date: April 1, 2013 Trademarks: Viton is a trademark of DuPont Performance Elastomers, L.L.C. Teflon is a trademark of E. I du Pont
More informationSTC 2L Series Solenoid Valves
STC 2L170-500 Series Solenoid Valves 2L170-500 Series Solenoid Valve Specifications Valve Model 2L170-3/8 2L170-1/2 2L170-3/4 2L200-1 2L300-1 1/2 2L500-2 Valve Type Action 2 Way, Normally Closed (NC) Pilot
More information3V SERIES SOLENOID VALVE
3V110-410 SERIES SOLENOID VALVE Valve Model 3V110-1/8 3V210-1/4 3V310-3/8 3V410-1/2 Port & Mounting Action & Motion Operating Pressure Body Ported Air Pilot, Spool Design, Response Time
More informationToll Free: Website:
Tire Chains Industrial Chains Chain Accessories Toll Free: 800-247-2400 Website: www.centralsands.com Passenger Vehicle TIRE CHAINS Regular Highway Service Bar Reinforced (Packed four pair per master carton
More informationSTANLEY DOOR CLOSER CANADA PL61DC DOOR CLOSERS
STANLEY DOOR CLOSER CANADA PL61DC DOOR CLOSERS Canada Price List 61 Effective: June 25, 2012 Contents Contents 2 What is new in this Price List 3 Nomenclature Updates 4 Sales Policy 5 Warranty 6 General
More information4V130P-430P SERIES AIR PILOT VALVE
4V130P-430P SERIES AIR PILOT VALVE Valve Model 4V130P-1/8 4V230P-1/4 4V330P-3/8 4V430P-1/2 Port & Mounting Action & Motion Operating Pressure Body Ported Double Solenoid, Spool Design, 3 Position, Pressure
More informationSTC E-Series Electrically Actuated Ball Valves 316 Stainless Steel, 2-Way or 3-Way
STC E-Series Electrically Actuated Ball Valves 316 Stainless Steel, 2-Way or 3-Way Ordering Part No. = (e.g., E 1/2-3-S) Indicator / Control E 1/2 - - - 3-S Model Name Electric Actuated Valves E Port Size
More informationPRICE LIST. July 1, 2018 TABLE OF CONTENTS.
PRICE LIST July 1, 2018 TABLE OF CONTENTS Series 3690 2 Series FL3690 2 Series 3790 3 Series 3190 3 Series 8860 4 Series RM370 4 Series L3 5 Continuous Gear Hinges 5 Retrofit Kits 6 Accessory Items 6 Terms
More informationSTC 2DS Series Anti-Hammering Slow Closing Pilot Solenoid Valves
STC 2DS500-2000 Series Anti-Hammering Slow Closing Pilot Solenoid Valves 2DS500-2000 Series Solenoid Valve Specifications Valve Model 2DS400F 2DS500F 2DS650F 2DS800F 2DS1000F 2DS1250F 2DS1500F 2DS2000F
More informationHydraulic Fittings. Design, Manufacture, Distribution
Hydraulic Fittings Design, Manufacture, Distribution Hydraulic Fittings are exclusively distributed by Beaumanor Engineering Ltd of Leicester and manufactured by Balu Auto Components of Chennai India,
More informationSTC 2W Series Solenoid Valves
STC 2W160-500 Series Solenoid Valves 2W160-500 Series Solenoid Valve Specifications Valve Model 2W160-3/8 2W160-1/2 2W200-3/4 2W250-1 2W350-1 1/4 2W400-1 1/2 2W500-2 Valve Type Action 2 Way, Normally Closed
More informationSSR SSR SSR SSR
DMX 52 Page DMX52 decoder firing board module 20 VAC reference Input 2 3 4 The Thyristor Firing board is compatible withdmx52 control standard 4 DMX52 triggers 2 3 4 - +- +- +- + The can trigger control
More informationStainless Steel Pilot Piston Solenoid Valve 2MS Series for High Temperature & High Pressure
Stainless Steel Pilot Piston Solenoid Valve 2MS Series for High Temperature & High Pressure S T C TM To Order, Please Specify: 1) Model No., 2) Voltage 2 Way, NC Pilot Piston Stainless Steel Part No. Voltage
More informationBI-PIPE INSTALLATION MANUAL. AUDI PERFORMANCE & RACING 1027-B Opelika Road Auburn Alabama 36830
BI-PIPE INSTALLATION MANUAL i. Disclaimer TABLE OF CONTENTS ii. iii. iv. Tools Needed Parts In the Kit Installation Procedure TABLE OF CONTENTS , LLC does not endorse modification of vehicles for use in
More informationGWC Valve International
GWC Valve International PROVEN TECHNOLOGY FOR INDIVIDUAL VALVE SOLUTIONS WORLDWIDE API 6D SWING CHECK VALVES Pressure Class: ASME 150-2500 Size Range: 2-36 CATALOG NUMBER SC-1001 G W C V A L V E I N T
More informationIndustrial Pumps and Systems Catalog
INDEX Industrial Pumps and Systems Catalog For most current information, please see our online catalog at CRANE PUMPS & SYSTEMS, Inc. 2008 Printed in U.S.A USA: (937) 778-8947 Canada: (905) 457-6223 International:
More informationMity-Lite Price Sheet
Commercial Price List See Page 4 for Warranty, General Terms and Conditions Rectangular See Page 6 for listing of table carts ABS Plastic Rectangular Folding Tables Standard Leg Model Number Table Size
More informationLOCKERS AND METAL FURNITURE PRICE LIST 2016 JULY
LOCKERS AND METAL FURNITURE PRICE LIST 2016 JULY Index Series Description Page Terms of sale / General information... 3 Accessories...50-51 CONCORDE/ F70...Arches... 45 100...................Basic cases...
More informationLUG CENTERING HUB CENTERING LUG CENTERING SPACERS, SPRINGS AND DONUTS Quick Plates Series IV
SPACERS, SPRINGS AND DONUTS Universal Distance Spacer with Magnets HW190e008 047 Distance Spacer Coats HW190 008 062 Light Truck Spacer - 28mm HW190 280 018 Light Truck Spacer - 36mm HW190 360 018 Light
More informationEZ ROLL (ROLLER SHADE) COMPONENTS APRIL 2018
EZ ROLL CLUTCH FOR 1 1/8 TUBING Holds up to 5 lbs. R-CL5-EZ-XX R-CL8-EZ-XX R-CL8-1.5-EZ-XX Used on R-T5-U-1.125 (1 1/8 Tube) - 23 Ball (BK) Black, (SW) Snow White US Patent No. D6300086S China Patent CN201248601Y
More informationPrices Effective April 1, 2017 PRICE BOOK * CHECK ONLINE FOR PRICE BOOK UPDATES
* CHECK ONLINE FOR PRICE BOOK UPDATES PRICE BOOK . Catalog: This catalog supersedes all previous issues. Terms and Conditions of Sale 2. Quotations: Quotations are made for acceptance within 60 days and
More informationPneumatic Stapler Type A Bea
We have made it easy for you to find a PDF Ebooks without any digging. And by having access to our ebooks online or by storing it on your computer, you have convenient answers with pneumatic stapler type
More information2V1-3V1 SERIES SOLENOID VALVE
2V1-3V1 SERIES SOLENOID VALVE Valve Model 2V1 3V1 Port & Mounting Body Ported, Stacking Action & Motion Solenoid, Direct Acting, 2 Way Response Time
More informationTerms and Conditions
Terms and Conditions GUARANTEE: All Brighton-Best International, Inc. products are manufactured to rigid quality control standards which meet or exceed industry standards. Records and tests pertaining
More informationPRODUCT GUIDE LANDSCAPE LIGHTING
PRODUCT GUIDE LANDSCAPE LIGHTING North America fxl.com FINISHES Metals AB Antique Bronze on Powder coat Standard AB Antique Bronze on Brass AT Antique Tumbled on AT Antique Tumbled on Brass CU BS Natural
More informationS T C. STC Air Actuated Valves. Fine Quality. Precision Engineered Advanced Design. Excellent Prices. connects fluid power to industrial automation TM
Precision Engineered Advanced Design Catalog No.: PUB09KS STC Air Actuated Valves Fine Quality Excellent Prices connects fluid power to industrial automation Website: StcValve.com STC PNEUMATIC ACTUATED
More informationGUIDELINE (ROLLER SHADE) COMPONENTS APRIL 2018
GUIDELINE CLUTCH FOR 1 1/8 TUBING Holds up to 5 lbs. R-CL5-GL-XX R-CL8-GL-XX R-CL8-1.5-GL-XX Used on R-T5-U-1.125 (1 1/8 Tube) - 23 Ball (BK) Black, (SW) Snow White US Patent No. D6300086S China Patent
More informationProven technology for individual valve solutions worldwide. GWC Valve International
Proven technology for individual valve solutions worldwide FORGED STEEL VALVES GATE, GLOBE & CHECK PRESSURE CLASS: ASME 150-2500 SIZE RANGE: 1/4-3 API STANDARD: 602 ASME B16.34 Catal og Nu mb er f SV-
More informationSTC Air Cylinders. Fine Quality. Precision Engineered. Advanced Design. Excellent Prices. Air Cylinders
Catalog: PUB 06 CYL STC Advanced Design Precision Engineered Fine Quality Excellent Prices connects fluid power to industrial automation F1 Table of Contents STC Air Cylinder Numbering System............F2
More informationAURORA QUIK-LOK SHELVING GSA PRICE LIST
AURORA QUIK-LOK SHELVING GSA PRICE LIST Effective October 1, 2001, through September 30, 2006 A STEEL SURCHARGE EQUAL TO 10% OF THE NET SALE PRICE MUST BE ADDED AS A LINE ITEM TO YOUR ORDER FOR ALL ITEMS
More informationOperations Manual. Model: DPR3000 Dual Pass Dough Sheeter. proluxe.com. formerly DOUGHPRO. New Name. Same Quality. Superior Service.
Operations Manual Model: DPR3000 Dual Pass Dough Sheeter formerly DOUGHPRO. New Name. Same Quality. Superior Service. proluxe.com Dough Roller (double pass) Heavy duty stainless steel construction. Compact
More informationHPI Cylinders. Manufacturers of Hydraulic & Air Cylinders Since 1946
HPI Cylinders Manufacturers of Hydraulic & Air Cylinders Since 1946 Cylinder Catalog 2018 HPI Cylinders www.hpicylinders.com Since 1946 Main Plant 13766 Milroy Place Santa Fe Springs, CA 90670 Phone (800)
More informationDURO MANUFACTURING, INC Arrowhead Drive Carson City, Nevada (775) FAX: (775)
DURO MANUFACTURING, INC. 3505 Arrowhead Drive Carson City, Nevada 89706 (775) 687-8866 FAX: (775) 687-8877 PART SA-01 SA-02 SA-03 SA-05 SA-06 SA-07 SA-08 SA-09 SA-10 SA-11 SA-12 SA-13 SA-14 SA-15 SA-16
More informationCardinal DETECTO. PORTABLE PLATFORM SCALES Digital Type Series 850F Owner s Manual
Cardinal DETECTO PORTABLE PLATFORM SCALES Digital Type Series 850F Owner s Manual CARDINAL SCALE MFG. CO. PO BOX 151, WEBB CITY, MO 64870 0066-M176-O1 Rev H 10/06 417-673-4631 www.cardinalscale.com Printed
More informationFemale Plug. connecting to Fuel Quantity
**Ag Diesel Solutions recommends replacing the Transorb/Suppressor Diode before the installation of this module*** Red wire = 12V Constant power. Male Plug connecting to Fuel Quantity Valve Black wire
More informationPRODUCT GUIDE LANDSCAPE LIGHTING. fxl.com. A Hunter Industries Company
PRODUCT GUIDE LANDSCAPE LIGHTING A Hunter Industries Company fxl.com FINISHES Metals Powder coat Standard Powder coat Specialty s AB on copper AB on brass AT on copper AT on brass CU BS SS NP BZ DG WI
More informationHALE STEEL PRICE LIST#0818 Effective August 1, 2018
HALE STEEL PRICE LIST#0818 Effective August 1, 2018 TABLE OF CONTENTS Single Faced Flat Shelving... 4 Double Faced Flat Shelving... 5 Single Faced Integral Back Divider Shelving.... 6 Double Faced Integral
More informationChicane Coilover Kit For '70 to '81 Camaro/Firebird
Nov 25, 2013 Chicane Coilover Kit For '70 to '81 Camaro/Firebird 1 P a g e Installation Instructions The following instructions are intended for professional installers and are guidelines only. Speedtech
More informationLINTECH.
Welcome to Our local technical support group consists of Automation Specialists located throughout the World. These Automation Specialists are experienced in the use of electronic and mechanical motion
More informationInstallation Instructions
Nov 25, 2013 Custom Bent Brake Line Kit '67-'69 Camaro and '68-'74 Nova Installation Instructions The following instructions are intended for professional installers and are guidelines only. Speedtech
More informationTL-105-D COLUMN HEATER
TL-105-D COLUMN HEATER INSTRUCTION MANUAL Timberline Instruments Inc. 1880 S. Flatiron Ct., Unit I Boulder, Colorado 80301 Ph: (303) 440-8779 Fx: (303) 440-8786 info@timberlineinstruments.com www.timberlineinstruments.com
More informationChicane Coilover Kit For '64 to '72 Chevelle/ A Body. Installation Instructions
Nov 3, 2017 Chicane Coilover Kit For '64 to '72 Chevelle/ A Body Installation Instructions Actual parts may vary from photo depending on application. 1 P a g e The following instructions are intended for
More information11.1 Price List & Ordering Codes NORTH AMERICA
11.1 Price List & s NORTH AMERICA TERMS & CONDITIONS To find a local authorized Pure Lighting dealer or sales representative, please call 773.770.1196 or visit our website at www.purelighting.com All prices
More informationSTC 2P025 Series Solenoid Valve
STC 2P025 Series Solenoid Valve 2P025 Series Solenoid Valve Specifications Valve Model Valve Type Action Cv (Orifice) Operating Pressure Operating Temperature 2P025 2 Way, Normally Closed (NC) Direct Acting
More informationTech Line: (952) Fax (952) Hanover Ave. Lakeville, MN Revised 6/17/2014
Tech Line: (952) 985-5675 Fax (952) 985-5679 21730 Hanover Ave. Lakeville, MN 55044 www.qa1.net Revised 6/17/2014 Parts included in the TK01 Tuning Kit: Item Number Description Qty 9042-126 Piston band
More informationSGS Galson Laboratories, Inc. Equipment Rental, FreePumpLoan & FreeSamplingBadges (3-in-1) Agreement
SGS Galson Laboratories, Inc. Equipment Rental, FreePumpLoan & FreeSamplingBadges (3-in-1) Agreement This Equipment Rental, FreePumpLoan & FreeSamplingBadges (3-in-1) Agreement (the Agreement ) is entered
More informationAURORA WIRE SHELVING PRICE LIST
AURORA WIRE SHELVING PRICE LIST Effective January 6, 2014 AURORA STORAGE PRODUCTS, INC. TABLE OF CONTENTS Certificate of Warranty............................................................... Page 2
More informationInstallation Instructions
Nov 3, 2017 G-Body Rear Coilover Conversion Kit 1 P a g e Installation Instructions The following instructions are intended for professional installers and are guidelines only. Speedtech Performance assumes
More informationPrice List. Catalog Eleven. Rigging. Effective February 16, Specialties Inc. manufacturer of stage equipment
Price List Catalog Eleven Rigging Effective February 16, 2015 & manufacturer of stage equipment (626) 575-0776 14850 Don Julian Road, Suite B (800) 221-9995 City of Industry CA 91746 www.hhspecialties.com
More informationDoor Restrictor Assembly. Model R2
Door Restrictor Assembly Model R2 Every attempt has been made to ensure that this documentation is as accurate and up-to-date as possible. However, Vertical Express assumes no liability for consequences,
More informationEM2040L High-Speed CNC Vertical Machining Center
Page 1 of 8 8-180063 EM2040L High-Speed CNC Vertical Machining Center MACHINE FEATURES CHEVALIER s EM series VMCs are designed for high precision, productivity, and high speed machining in different industries,
More informationOperating Manual. FloorMaster FS Flooring Stapler A18201 READ ALL SAFETY INSTRUCTIONS
Operating Manual FloorMaster FS Flooring Stapler READ ALL SAFETY INSTRUCTIONS items included with tool INCLUDED WITH TOOL Plastic Case Tool Manual Safety Glasses Pneumatic Tool Oil Hex Key x 3 ACCESSORIES
More informationCommercial Ball Valves
Price Schedule C-01-18 January 1, 2018 Supersedes C-06-15 Commercial Ball Valves BRASS & BRONZE BALL VALVES TWO-PIECE BODY $ 10.95 0.27 20 120 10.95 0.29 20 120 012 10.10 0.38 12 96 034 13.90 0.58 10 60
More informationSeries 83. Stainless Steel Mini Cylinder
Stainless Steel Mini Cylinder Magnet included in 7/8 and 1-1/4 bore only in double acting cylinder THEORETICAL CYLINDER FORCE (LBS). Operating Pressures (PSI) Size Action 25 50 75 100 125 150 3/4" Out
More informationLevel Alert Model Multi-Switch Liquid Level Sensor. Assembly and Installation Instructions
Level Alert Model 2000 Multi-Switch Liquid Level Sensor Assembly and Installation Instructions Kit Form Each unit is provided in kit form with step-by-step instructions, making it extremely easy to custom
More informationActuLink ABS Module - ABS-MOD-400
Installation Instructions ActuLink ABS Module - ABS-MOD-400 For more information on the installation and operation of Tuson s towable ABS system, consult the installation and operations manuals for the
More informationGRADE 1 ELECTRIFIED CYLINDRICAL & UNIT LOCKS
GRADE ELECTRIFIED CYLINDRICAL & UNIT LOCKS LAK Function: Specifications: Features: Locked on the outside only. The 00mA @ VDC Vandal resistant clutch lever release inside lever is always unlocked for 9/6
More informationSonoran Roller Shade. Retail Price List
Sonoran Roller Shade Retail Price List Effective September 15, 2014 Terms and Conditions Order Processing Telephone Orders Verbal orders are accepted as the dealer's responsibility. Each order will be
More informationUniversal Bevel Drives Service Manual
Engineering Service Bulletin #SB241202 Universal Bevel Drives Service Manual Cautions Following are some general cautions. All personnel shall use safe and sound practices and take all necessary precautionary
More informationq u i e t price list march 2018
q u i e t price list march 201 quiet terms and conditions Sales and Service Policy uidelines detailing the operating policies and procedures of Bernhardt Design are provided in the Sales and Service Policy
More informationVal-U-Act Ball Valve Operators. Air-Oil Systems, Inc.
Val-U-Act Ball Valve Operators Specifications: Class-Act (CL) Valve Operator (/4 /4 ) Double Acting Valve Operator Systems Valve Sizes from /4 to /4 48 in. lbs. to 80 in. lbs. As compared to other rotary
More informationQuality Aftermarket Parts for Lift Equipment Now Order Parts Online pcaerialparts.com
Quality Aftermarket Parts for Lift Equipment Now Order Parts Online TERMS & CONDITIONS Prices and Payment Terms: Please note prices and terms are subject to change without notice. TABLE OF CONTENTS JLG...
More informationTamil Nadu Public Service Commission
ASSISTANT CONSERVATOR OF FORESTS DOE :02.12.2014 TO 09.12.2014 _ Subjcct:AGRICULTURE ~ Codc:ACFAG ~........ B X 41 AX 81 DX 121 o A 161 c l< 2 cy 42 CY' 82 Dy 122 13 x 162 B ~ J ox 4J c \ 83 D..( 123 c
More informationTHIS PRICE SHEET SUPERSEDES AND ALL OTHER PREVIOUS SHEETS
03-01-09 THIS PRICE SHEET SUPERSEDES 2-01-08 AND ALL OTHER PREVIOUS SHEETS PRICE SHEET Portable Shaped Table ConverTable Bench Unitable Seminar/Training Table (DS) Fold-N-Roll 08 Series (Wall Units) Fold-O-Leg
More informationDia Vac Pump Operating Instructions Heated Head E Series Pump with General Purpose Motor
Dia Vac Pump Operating Instructions Heated Head E Series Pump with General Purpose Motor Air Dimensions Incorporated 1371 West Newport Center Drive, Suite # 101 Deerfield Beach, FL, 33442 800.423.6464
More informationINSTRUCTION MANUAL INSTALLATION, OPERATION, AND MAINTENANCE ACTUATOR MANIFOLD
INSTRUCTION MANUAL INSTALLATION, OPERATION, AND MAINTENANCE B-3724M ACTUATOR MANIFOLD MIDLAND MANUFACTURING CORP. 7733 Gross Point Road Skokie, Illinois 60077 Phone (847) 677-0333 FAX (847) 677-0138 WEBSITE
More informationPO Box 847 Greensburg, PA Phone (724) Fax (724) /0
PO Box 847 Greensburg, PA 15601-0847 Phone (724) 838-8320 Fax (724) 838-1544 All Stainless Steel All In Stock www.gibsonstainless.com Price List 114 7/01/08 1/1/16 PRICE LIST 118 Contents Item...Page Made
More informationQUALITY FROM THE CUTTING EDGE OF FABRICATION
BENDING EFFECTIVE July 2005 QUALITY FROM THE CUTTING EDGE OF FABRICATION TABLE OF CONTENTS COMBINATION OF DIES & PUNCHES - - - - - - - - - - - - - - - - - - - - - - - - - - 3 88º & 90º PUNCHES - - - -
More informationHousing Styles. Square Aluminum Block
Page 1 of 18 Housing Styles Square Aluminum Block AB General purpose temperature Accomodate a variety of elements Type A B Customize AB1 0.187" 0.75" AB2 0.250" 0.75" AB3 0.250" 1.25" AS Square Aluminum
More informationSPECIFICATIONS & DATA. October 2005
SPECIFICATIONS & DATA October 2005 UNEX GRAVITY SPECIFICATIONS & DATA BOOK 10.05 Table of Contents Skatewheel Conveyor Series SW Straight Sections 2 Curves & Spurs 3 1-3/8 Dia. Roller Conveyor Series
More informationINTERNATIONAL MALLEABLE IRON PIPE FITTINGS & UNIONS
INTERNATIONAL MALLEABLE IRON PIPE FITTINGS & UNIONS PRICE SCHEDULE #100217 EFFECTIVE: FEBRUARY 6, 2017 REV. 1 MADE IN BRAZIL, UNLESS NOTED 117 Gulick Street, Blossburg, PA 16912 (800) 248-1027 Sheet #100217,
More informationBILT INDUSTRIES, INC.
BILT INDUSTRIES, INC. What you appreciated as Frick-Gallagher is now BILT. BILT with powder coating. QUICK-BILT KLIP-BILT SPEEDI-BILT National Sales Office 801 W. Markey Road Belton, Missouri 64012 Phone:
More information400W, 5V - 188V Surface Mount Transient Voltage Suppressor
400W, 5V - 188V Surface Mount Transient Voltage Suppressor FEATURES Low profile package Ideal for automated placement Glass passivated junction Excellent clamping capability Fast response time: Typically
More informationUser s Manual for Tennessee Chill Box System P/N CB8000
User s Manual for Tennessee Chill Box System P/N CB8000 Read and understand all instructions before using this product. Open carton carefully and inspect product for damage caused by carrier. If any damage
More informationINTERNATIONAL MALLEABLE IRON PIPE FITTINGS & UNIONS
INTERNATIONAL MALLEABLE IRON PIPE FITTINGS & UNIONS PRICE SCHEDULE #101016 EFFECTIVE: OCTOBER 1, 2016 MADE IN BRAZIL, UNLESS NOTED 117 Gulick Street, Blossburg, PA 16912 www.wardmfg.com (800) 248-1027
More informationHAYN ROD RIGGING MANUFACTURER OF QUALITY HARDWARE
PROFESSIONAL PARTNER EDITION HAYN ROD RIGGING MANUFACTURER OF QUALITY HARDWARE WWW.HAYN.COM tel800.346.4296 fax800.441.4296 [ www.haynmarine.com ] 1 About Us: Hayn has been engineering and manufacturing
More informationPREMIER, MARINE, & STANDARD
INSTA LLATION INSTRUCTION AND SERVICE MANUAL I TITAN 12" x 2" BRAKES FREE BACKING. UNI-SERVO. DUO-SERVO PREMIER, MARINE, & STANDARD Limited Warranty TITAN Inc. ("TITAN') warrants its products to be free
More informationProfile Catalog. The New Standard for Flexible Trim. displaytrim.com
Profile Catalog The New Standard for Flexible Trim Markets Served Point Of Purchase (POP) Signage Exhibit Design Retail Store Design Architectural Metal Fabrication Industrial OEM Industrial Refrigeration
More informationQuality Aftermarket Parts for Lift Equipment Now Order Parts Online pcaerialparts.com
Quality Aftermarket Parts for Lift Equipment Now Order Parts Online TERMS & CONDITIONS Prices and Payment Terms: Please note prices and terms are subject to change without notice. TABLE OF CONTENTS JLG...
More information