1500 Group Tips One-Piece Acetylene
|
|
- Britney Maxwell
- 5 years ago
- Views:
Transcription
1 One-Piece Acetylene 502 Series Hand or Machine Tips Preheat Cleaning in. mm in. mm Holes Preheat in. m /4 6 /4 6 08Z /2 3 /2 24 5Z /2 38 -/2 38 5Z Z Z Z A A General purpose Medium preheat sufficient for cutting dirty plate and for beveling Metal Preheat Kerf Thickness Tip Oxygen Oxygen Acetylene Speed Oxygen Acetylene Width in. mm Size psig psig psig ipm mm/min cfh cfh in. mm / Z / Z / Z Z / Z Z / Z Z Z Z Z Z Z A ,300-, A ,600-, Not recommended for acetylene pressure less than 5 psig. 2 Sizes 8 and 20 recommended only for use with C-39. ESAB Welding and Products
2 One-Piece Alternate Fuels 564 Series Propylene Tips Hand or Machine Tips Preheat Cleaning in. mm in. mm Holes Preheat in. m /8-/2 0-9 / /4--/ / General purpose Medium preheat sufficient for cutting dirty plate and for beveling Metal Preheat Thickness Oxygen Oxygen Propylene Speed Oxygen Propylene Kerf Width in. mm in. mm psig psig psig ipm mm/min cfh cfh in. mm /4 6 / /2 3 / /4 9 -/ / /2 38 -/ ESAB Welding and Products
3 One-Piece Alternate Fuels 55 Series Natural Gas & Propane Tips Hand or Machine Tips Preheat Cleaning in. mm in. mm Holes Preheat in. m /8-/2 0-3 /2 3 08Z /4--/ / Z Z Z Z Z Z Z One-piece natural gas or propane, long preheat flames Propane or Natural Gas Propane or Natural Gas Metal Thickness Tip Size Oxygen Preheat Oxygen Speed Oxygen Kerf Width in. mm in. mm psig psig psig ipm mm/min cfh cfh in. mm /4 6 /2 3 08Z /2 3 /2 3 08Z /4 9 -/ Z / Z /2 38 -/ Z Z Z Z Z Z Z Z Z Z ,490-, Z ,640-, ESAB Welding and Products
4 Two-Piece Alternate Fuels 566 Series Alternate Fuels High Speed Tips Machine Tips in. mm in. mm Preheat Holes or Slots Cleaning Preheat /2 3 /2 3 2 # 3/4 9 3/4 9 2 # # -/2 38 -/ # # 2-/ / # # # # # # Two-piece, high-speed, high preheat for machine cutting, alternate fuels To clean preheat slots, remove external sleeve and use a soft bristled brush. # Clean cutting orifice only with high speed tip cleaning kit #755F00. Ordering Information Metal Thickness Natural Gas or Propane Propylene Propylene - High Preheat in. mm Set Internal External Set Internal External Set Internal External / / / / Z Z Z Z Use where high preheat intensity is desired. Preheat Kerf Internal Oxygen Oxygen Fuel Speed Oxygen Fuel Width in. mm in. mm psig psig psig ipm mm/min cfh cfh in. mm /2 3 / /4 9 3/ /2 38 -/ / / ,0-, ESAB Welding and Products
5 Two-Piece Alternate Fuels 567 Series Hand or Machine Tips Preheat Cleaning in. mm in. mm Holes or Slots Preheat in. m /4 6 / /2 3 / /4 9 3/ Ordering Information Two-piece, high preheat for machine cutting, alternate fuels To clean preheat slots, remove external sleeve and use a soft bristled brush. Given pressures are torch inlet pressures, not what to set regulator at; hose length, diameter, flash arrestor use, and many other factors affect pressure. Use test gauge adaptors to check pressure at back of torch. When using tips larger than 6 in. (52 mm), ESAB recommends using straight (hand) cutting torches, not combination torches. Metal Thickness Natural Gas or Propane Propylene Propylene-High Preheat in. mm Set Internal External Set Internal External Set Internal External / / / Z Z Z Z Z Z Use where high preheat intensity is desired. Internal Oxygen Fuel Speed Oxygen Fuel Kerf Width in. mm in. mm psig psig ipm mm/min cfh cfh in. mm /4 6 / /2 3 / /4 9 3/ / / ,20-, ,340-, ,560-, ESAB Welding and Products
6 Specialty 539 Series Alternate Fuels Tips Special Tips Propylene, Natural Gas, Propane Preheat Cleaning in. mm Holes Preheat in. mm Z / Z / Z56 62 /4 6.4 Oxygen Fuel in. mm psig psig Z Z Z Unsurpassed for washing off rivet heads and then piercing rivet to facilitate removal Each tip is equipped with a spud, which produces a low-velocity oxygen stream Spudded for maximum useful oxygen flow at psi. 2 Spudded for maximum useful oxygen flow at psi. 3 The cutting oxygen throat diameter is in. (.4 mm) on #65Z55; 0.25 in. (3.2 mm) on #66Z Series Acetylene Tips Special Tips Acetylene Preheat Cleaning in. mm Holes Preheat in. m Z For cutting and trimming Oxygen Acetylene Oxygen Acetylene in. mm in. mm psig psig cfh cfh 3/4--/ Z ESAB Welding and Products
7 Specialty 50 Series Acetylene Tips Special Tips Acetylene Cleaning in. mm Preheat Holes Preheat in. m Preheat Oxygen Oxygen Acetylene Speed Oxygen Acetylene Kerf Width in. mm in. mm psig psig psig ipm mm/min cfh cfh in. mm Z Z Z Z Z Z Z , 520 & 568 Tips Special Tips Acetylene, Propylene, Natural Gas & Propane For For Propane For FG-2 Acetylene Natural Gas MAPP 568 Cleaning in. mm 5 Series 520 Series Series Preheat in. m X4 5X X5 5X For riser removal Except in length, comparable to 502 Supplied straight, with instructions for bending For preheat cleaning size, reference 502 group series cleaning preheat column. For gouging, grooving plate edges for welding, removing defects from castings, pad washing; bent 20 5 and 568 tips have stellite wear skids Alternate Fuels Acetylene for Series 5 Approximate Groove Dimensions -PSIG Approximate Width Depth Oxygen Acetylene Speed Oxygen Acetylene in. mm in. mm in. mm psig psig ft/min m/min cfh cfh X4 5/6 8.0 /8-/ X5 3/8-7/ /6-/ ESAB Welding and Products
GOSS replacement parts are not sourced from or authorized by other manufacturers listed herein and their names and trademarks are used descriptively
replacement parts are not sourced from or authorized by other manufacturers listed herein and their names and trademarks are used descriptively for your convenience only. has no relationship with other
More informationDIE-FORGED BRASS HEAD for maximum durability. UNIVERSAL GAS MIXER Gives top performance with any fuel gas. RIBBED BRASS HANDLE For sure grip &
Victor Universal They combine the spiral and injector mixer principles. The result is a high performance torch that operates on any fuel gas. Universal torch cutting capacity from 1/8" (3.2 mm) to 8" (203.2
More informationAlternate Fuel solutions
Alternate Fuel solutions ONE TORCH, ALL FUELS Complete Lineup Torches, Handles and Attachments LPG Regulators Heating Nozzles Cutting Tips Outfits Alternative Fuel Solutions What you need to know about
More informationCOMET GAS CONSUMABLES
Insta COMET GAS CONSUMABLES CIGWELD.COM.AU CIGWELD introduces the next generation of Comet gas consumables, featuring a gas equipment world first in black nickel plating. This patented innovation from
More informationSTEEL MILL EQUIPMENT MESSER CUTTING SYSTEMS
STEEL MILL EQUIPMENT MESSER CUTTING SYSTEMS SMB 600 / 663 HEAVY-DUTY HAND CUTTING TORCHES SMB 600 with angled torch head SMB 600 with straight torch HEAVY-DUTY HAND CUTTING TORCH SMB 600 With spring lever
More informationGas Apparatus & Pressure Controls
Welding Torch Handles 315FC 315C HD 310C 100FC 100C Victor Torch Handles cover the full range of welding, cutting and heating needs. Choose from patented VanGuard or standard models. Performance matched
More informationSTEEL MILL EQUIPMENT MESSER CUTTING SYSTEMS
STEEL MILL EQUIPMENT MESSER CUTTING SYSTEMS SMB 600 / 663 HEAVY-DUTY HAND CUTTING TORCHES SMB 600 with angled torch head SMB 600 with straight torch head HEAVY-DUTY HAND CUTTING TORCH SMB 600 With spring
More information4.09 Cutting Speed Chart: Mild Steel, SL100 Torch with Exposed Tip
4.09 Cutting Speed Chart: Mild Steel, SL100 Torch with Exposed Tip Art # A-04203 Electrode Start Cartridge Tip Shield Cup Body Shield Cap, Deflector 9-8215 9-8213 9-8237 9-8243 Torch: SL100 with Exposed
More informationMachine Cutting Equipment. Torches and Nozzles for High Performance
Machine Cutting Equipment Torches and Nozzles for High Performance Edition 1/2010 GCE Group - the European market leader in gas control equipment GCE world-wide: http://www.gcegroup.com GCE is an experienced
More informationMUST BE UL LISTED or EQUIVALENT
1 01 2 PKG MIG WELDER Rated Output: 200 Amps at 28 VDC 60% Duty Cycle or 250 A, 28 VDC at 40% Duty Cycle Max Open-Cicuit Voltage: 38 Wire Feed speed: 50-700 IPM Package includes: #MMM252 (#907321) Welder
More informationPowerful. Durable. Simple. PowerCut Series PLASMARC CUTTING EQUIPMENT
Powerful. Durable. Simple. PowerCut Series PLASMARC CUTTING EQUIPMENT Plasma Cutting What is plasma cutting? Plasma is an ionized gas that is electrically conductive giving you the ability to cut most
More informationCapacities and Operating Data
CROSSFIRE Line Burner Page 5603 Capacities and Operating Data Performance Data Lineal heat release at high fire Minimum lineal heat release Btu/hr/f t 1,000,000 1,250,000 1,500,000 1,750,000 2,000,000
More informationGas Apparatus & Pressure Controls
Vanguard Hand Cutting Torches Specifications and Ordering Information ST2600 Vanguard Series - For use with any fuel gas. Uses Series 1 cutting tips Cuts 1/8"/3.25mm to 16"/400mm Includes Built-in patented
More informationOXY-FUEL EQUIPMENT. STARCUT Hand Cutting and Gouging Torches
STARCUT Hand Cutting and Gouging Torches 1 STARCUT 1615 and 3615 Hand Cutting and Gouging Torches According EN-ISO, BSP, CGA, NFE and AS standard. Fuel Gas Type A : Acetylene Hydrogen Fuel Gas Type PMYF:
More informationCOMET Flashback Arrestors
Model F1 (regulator mounted) 308799 F1 Super Oxygen 5/8"-18 UNF RH Regulator outlet 1000 kpa 1122 308800 F1 Super Fuel 5/8"-18 UNF LH Regulator outlet 500 kpa 557 (150 kpa Acetylene) 170 Flashback Arrestor
More informationINDUSTRIAL Gas Apparatus CutSkill & FirePower Products
INDUSTRIAL Gas Apparatus CutSkill & FirePower Products Catalog www.victorequip.com Quality Statement Victor is committed to providing superior quality, reliable apparatus that earn our customers confidence.
More informationRepair Parts Parts List for RIDGID 10 Compound Miter Saw Model No. MS1065LZ RIDGID parts are available on-line at
0. Repair Parts Model No. MS0LZ 0 0 0 0 0 FIGURE A. 0. 0 0 0 0. 0 0 WARNING: The assembly shown represents an important part of the Double Insulated System. To avoid the possibility of alteration or damage
More informationAutomated Oxy-Fuel Cutting Systems
It s time to innovate Oxy-Fuel cutting. The next step in Oxy-Fuel Cutting from the market leaders! Automated Oxy-Fuel Cutting Systems FIT+ with tool free nozzle exchange FIT+ two with integrated ignition
More informationWelding Nozzles 300 Series
Welding Nozzles For Use with Torch Handles For Welding Nozzle Information & Flow Data see Section B pages 5051. HEAVY DUTY WELDING NOZZLE ORDERING INFORMATION W 000 03230110 (Boxed) 00 03230111 (Boxed)
More informationAutomated Oxy-Fuel Cutting Systems
It s time to innovate Oxy-Fuel cutting. The next step in Oxy-Fuel Cutting from the market leaders! Automated Oxy-Fuel Cutting Systems FIT+ with Tool-Free nozzle exchange FIT+ two with integrated ignition
More informationT205 Series Tank Blanketing Regulators
Bulletin 74.1 D103747X012 T205 Series June 2018 T205 Series Tank Blanketing Regulators Figure 1. Type T205 Tank Blanketing Regulator Contents Features... 1 Introduction.... 1 Specifications... 2 Principle
More informationTORCH BURNERS LOW, MEDIUM, AND HI-PRESSURE SERIES DESCRIPTION LOW-PRESSURE SERIES MODEL : T,TA,TB,RTA,RTB ET,ETA,ETB,RETA,RETB 12 ET 12 RETB
TORCH BURNERS LOW, MEDIUM, AND HIPRESSURE SERIES MODEL : T,TA,TB,RTA,RTB ET,ETA,ETB,RETA,RETB Revision: 0 BULLETIN 325, 32, 327 2 ET 2 RETB DESCRIPTION Torches are made up in three series LowPressure,
More informationT205 Series Tank Blanketing Regulators
T205 Series Tank Blanketing Regulators Bulletin 74.1:T205 September 2013 Figure 1. Type T205 Tank Blanketing Regulator Contents Features...1 Introduction...2 Specifi cations...2 Principle of Operation...2
More informationJB Series. Gas Back Pressure Reducing Valves BACK PRESSURE REDUCING VALVE
JB Series Gas Back Pressure Reducing Valves BACK PRESSURE REDUCING VALVE The LowFlow JB Series line of back pressure regulators have the ability to handle very high pressures and very low flows. These
More informationHVAC/R & PLUMBING EQUIPMENT 2016 CATALOG. esab.com
HVAC/R & PLUMBING EQUIPMENT 2016 CATALOG esab.com TURBOTORCH THE PROFESSIONALS CHOICE Since 1967, TurboTorch, an ESAB brand, has set the highest standard for manufacturers of air fuel equipment. TurboTorch
More informationKINEMAX. Medium velocity gas or oil burners
KINEMAX Medium velocity gas or oil burners High Temperature Burners - KINEMAX -.- Exit velocities up to 00 km/h (8 m/s) to promote workload heat penetration and better furnace temperature uniformity Operate
More informationSHEILDED METAL ARC WELDING (SMAW) AT/AE MECHANICAL CONTEST
SHEILDED METAL ARC WELDING (SMAW) AT/AE MECHANICAL CONTEST 1. Position two 3 x 6 x ¼ steel plates in the flat position for a butt weld. The weld joint should be 6 long. 2. Select to either bevel the metal
More informationTechnical Specification
Our plasma can cut 0.3-30mm; our oxygen can cut 5-150mm Our machine can both cut by plasma and oxygen Quotation details Main parts Delivery time: Package: Shipping Warranty: 1500*3000mm/1500*2500mm working
More informationBore (B) Pitch Diam. Drilling Template Flanges (1) Diam of Diam of. Groove. Neck D X G A Raised Face Raised Face P Raised face
Class 300 Orifice s Pipe size Thickness of Depth of jack Jack screw s (1) screw slot size & of and raised face Hub Bevel threaded Length of of Stud stud bolts Face face face bolt circle Bolts Bolts Bolt
More informationTYPE E Main Valve Sizes 3 /8 through 12
Technical Data SD 3001E PRINTED IN U.S.A. SD 3001E/9709 SPENCE ENGINEERING COMPANY, INC. 150 COLDENHAM ROAD, WALDEN, NY 12586-2035 A B TYPE E MAIN VALVE FACE TO FACE DIMENSIONS C D E DIMENSIONS (inches)
More informationSECTION 2 SAFETY, TOOLS AND EQUIPMENT, SHOP PRACTICES UNIT 7: TUBING AND PIPING
SECTION 2 SAFETY, TOOLS AND EQUIPMENT, SHOP PRACTICES UNIT 7: TUBING AND PIPING UNIT OBJECTIVES After studying this unit you should be able to list the different types of tubing used in heating, air conditioning,
More informationSerial N... MX1 Chain Driven Pipe Cutting and Bevelling Machine Parts and Operating Manual
Serial N... MX1 Chain Driven Pipe Cutting and Bevelling Machine Parts and Operating Manual Table of contents Section Description Page 1.0 General Information 2 2.0 Specification 2 2.1 General Specification
More informationCleaning the Broiler. STOP Important Symbols. Meat Guides - P/N Tools. Instructions. Tools Needed. Instructions
Cleaning the Broiler Needed No-Scratch Pad Soft Bristle Brush Towel Small Orifice Brush Degreaser Large Orifice Brush Heat Resistant Gloves Utility Knife Shaft Cleaning Tool STOP Important Symbols 6. 4.
More informationGO-FER. One Machine for All Applications!
412-331-1776 www.bugo.com GO-FER IV 3 Year Warranty One Machine for All Applications! Bug-O Systems is guided by honesty, integrity and ethics in service to our customers and in all we do. The GO-FER IV
More informationPT-37 PLASMARC TORCH. PT-37 Torch. Specifications. Optional Accessories. Consoles PowerCut 1300, PowerCut 1600, ESP-101. Ordering Information.
PT-37 PLASMARC TORCH PT-37 Torch The patented PT-37 torch cuts up to 1.25 (32 mm) material using air as the plasma and shielding gas. Utilizing a blowback start and an electronically controlled pilot arc
More information627 Series Pressure Reducing Regulators
627 Series Pressure Reducing Regulators Introduction The 627 Series direct-operated pressure reducing regulators (Figure 1) are for low and high pressure systems. These regulators can be used with natural
More informationOxy-fuel torches - The product range. HIGHER PRODUCTIVITY AND DURABILITY. MORE CUTTING OPTIONS..
Oxy-fuel torches - The product range. HIGHER PRODUCTIVITY AND DURABILITY. MORE CUTTING OPTIONS.. COOLJET Innovative, fully integrated oxygen cooling guarantees operational safety, highest cutting quality
More informationSeries 774 Automatic Skid Package
Fluid Engineering 1432 Walnut St Erie, PA 16502 USA PH 814.453.5014 FAX 814.452.6573 www.fluideng.com sales @fluideng.com CONTINUOUS FLOW The Fluid Engineering 774 Strainer Package is designed to handle
More informationNUMOREX NXB ESAB CUTTING SYSTEMS. Flexibility, Durability, Reliability ESAB,YOUR PARTNER IN WELDING AND CUTTING. Machines
ESAB CUTTING SYSTEMS NUMOREX NXB Flexibility, Durability, Reliability Machines Processes Numerical Controls Programming Environment ESAB,YOUR PARTNER IN WELDING AND CUTTING. ESAB NUMOREX NXB The NUMOREX
More informationARCAIR IS SYNONYMOUS WITH CARBON ARC GOUGING
ARCAIR IS SYNONYMOUS WITH CARBON ARC GOUGING 1980s SLICE torch introduced, allowing for portable and quick cutting solutions for fire and rescue operations. 1983 Introduces K4000 cutting and gouging torch.
More informationSPARE PARTS LIST PAGE 1
PAGE 1 001 JM23300009 HEX BOLT M8X16 2 002 JM23300010 SPRING WASHER 8 2 003 JM23300011 FLAT WASHER 8 2 004 JM23300012 RIVING KNIFE 1 005 JM23300013 PAN HEAD SCREW M6X16 1 006 JM23300300 UP BLADE GUARD
More informationMI0559A OXY-BEVEL OPERATIONS MANUAL: Oxy-fuel contouring beveling head with manual tilt function.
Page 1 3/21/2014 MI0559A OXY-BEVEL OPERATIONS MANUAL: Oxy-fuel contouring beveling head with manual tilt function. Torches: There are 5 torches total that make up the beveling system. There are two bevel
More informationTechnical Data TYPE A SERIES AIR ADJUSTED PILOT SPENCE ENGINEERING COMPANY, INC. 150 COLDENHAM ROAD, WALDEN, NY SD 4011 OPERATING PRINCIPLE
Technical Data SD 4011 SPENCE ENGINEERING COMPANY, INC. 150 COLDENHAM ROAD, WALDEN, NY 12586-2035 TYPE A SERIES AIR ADJUSTED PILOT PRINTED IN U.S.A. SD 4011/9504 Type A or A83 (wt 6 lb) Type A53 or A 85
More information627 Series Pressure Reducing Regulators
627 Series Pressure Reducing Regulators Introduction The 627 Series direct-operated reducing regulators (Figure 1) are for low and high systems. These regulators can be used with natural gas, air, or a
More informationATTC Multi-Use Adapters And Tips For Oxy Fuel Torches And Machines
419 ATTC Adapters And Tips For Oxy Fuel Torches And Machines 420 Unretouched photo showing a standard tip and a Adapter in use. Tests have shown System components to be as long lasting and efficient as
More informationPortable Automatic Gas Cutter
Portable Automatic Gas Cutter For every person who will be engaged in operation and maintenance supervision, it is recommended to read through this manual before any operations, so as to permit optimum
More informationGeneral Hand Tools (1 of 6)
General Hand Tools (1 of 6) Screwdrivers Straight-slot screwdrivers turn screws with straight slots. Phillips head screwdrivers turn screws with slots resembling a cross. General Hand Tools (2 of 6) Wrenches
More informationGANTRY TYPE CNC PLASMA CUTTING MACHINE Model: GSII-4000
GANTRY TYPE CNC PLASMA CUTTING MACHINE Model: GSII-4000 MACHINE STRUCTURE: TECHNICAL DATA: ITEM DESCRIPTION GSII-4000+PMX105 MACHINE BODY CUTTING TORCH Main Frame Machine Size (mm) Effective Cutting Area
More informationP627 High Flow Gas Regulator
P627 High Flow Gas Regulator Wide of Flow Capacities Durable Powder Coated Exterior Installation Versatility NACE Construction Available The P627 is a spring loaded, direct-operated regulator for both
More informationHD II Plasma Cutter Specifications
PLASMA BASE DESIGN HD II Plasma Cutter Specifications Automatic Digital Torch Height Control Torch Error Detection (Increases Consumable Life) Automatic Torch Touch Off Backed with over 30 Years of CNC
More informationGTV HVOF K2 Burner OPERATORS MANUAL GTV Verschleißschutz GmbH.
OPERATORS MANUAL GTV HVOF K2 Burner 780.000 1 Machine: EG - DECLARATION OF CONFORMITY According to EG- Machine Guideline 98/37/EG, Annex II A EG-Guideline Electrical Magnetically Amicability 89/336/EWG
More informationPT-32EH Plasmarc Cutting Torches
PT-32EH Plasmarc ting Torches Instruction Manual (EN) 0558003746 Be sure this information reaches the operator. You can get extra copies through your supplier. caution These INSTRUCTIONS are for experienced
More information10.5 gal. Vertical Oil Lubricated Air Compressor
10.5 gal. Vertical Oil Lubricated Air Compressor Model No. AC1104 Tank volume: 10.5 gal. (40 L) Direct drive Oil-lubricated single cylinder pump for durability and long life triple the pump life of comparable
More informationAir Carbon Arc Gouging Torches & Equipment; Slice Exothermic Cutting Systems. Gouging & Cutting Products & Accessories
Air Carbon Arc Gouging Torches & Equipment; Slice Exothermic Cutting Systems Gouging & Cutting Products & Accessories Gouging & Cutting Products & Accessories EXTREME Air Carbon Arc Gouging Torches Angle-Arc
More information270A SERIES HIGH-SIDE FLOAT VALVES BULLETIN 270A-SB13-01 SERVICE BULLETIN
VALVES VESSELS SYSTEMS CONTROLS 270A SERIES HIGH-SIDE FLOAT VALVES BULLETIN 270A-SB13-01 SERVICE BULLETIN System drawings shown in this bulletin are for illustration purposes only. Refrigeration systems
More informationCutSkill GAS EQUIPMENT RANGE TRADESMAN GAS KITS BLOWPIPE CUTTING ATTACHMENT ST400 TORCH REGULATORS FLOWMETERS FLASHBACK ARRESTORS CUTTING NOZZLES
GAS EQUIPMENT RANGE TRADESMAN GAS KITS BLOWPIPE CUTTING ATTACHMENT ST400 TORCH REGULATORS FLOWMETERS FLASHBACK ARRESTORS CUTTING NOZZLES CIGWELD.COM.AU GAS CUTTING & WELDING KITS TRADESMAN CUTTING & WELDING
More informationEXOTHERMIC CUTTING EQUIPMENT
EXOTHERMIC CUTTING EQUIPMENT Objectives By the end of this session, you will be able to: Identify the difference between the Arcair packages that are available to EU customers. Recognise the main components
More informationBUTBRO WELDING PRODUCTS
1190 ORBIT Lightweight Welding and Cutting Blowpipe A new superbly constructed welding & cutting blowpipe designed with safety in mind and engineered from highest quality materials to complement the operator
More informationKOIKE'SQUALITYTIPSASSUREMOREACCURATE, ANDSAFERCUTTING
Code 82016 KOIKE'SQUALITYTIPSASSUREMOREACCURATE, ECONOMICAL, ANDSAFERCUTTING Koike has gained a world-wide reputation as a leading manufacturer in the fif!ld of the gas cutting machines. Most of the reputation
More informationBurner Selection Criteria
UNI-RAD Radiant Tube Burners Page 4803 Burner Selection Criteria Combustion Air View Port/Optic Flame Sensor Mount Gas Inlet 3"- 4" Burner Selection The UNI-RAD Burner can be used with various radiant
More informationINSTALLATION AND SET-UP
CONTENTS INTRODUCTION 10 SPECIFICATIONS 11 INSTALLATION AND SET-UP 12 DESCRIPTION OF THE CONTROL PANEL 13-14 MELTING AND INJECTION 15 CIRCUIT DIAGRAM 16 9 INTRODUCTION We would like to congratulate you
More informationTABLE TYPE CNC PLASMA CUTTING MACHINE Model: GSII-3015TD - MAGICAL SHEAR
TABLE TYPE CNC PLASMA CUTTING MACHINE Model: GSII-3015TD - MAGICAL SHEAR MACHINE STRUCTURE: TECHNICAL DATA: ITEM DESCRIPTION Magicalshear3015+MAXPRO 200 MACHINE BODY CUTTING TORCH Main Frame Machine size(mm)
More informationMaintenance Manual. 3-Inch Internal Valve. F660 Series
3-Inch Internal Valve F660 Series LIST OF EFFECTIVE PAGES On a revised page, the portion of text or illustrations affected by the change is indicated by a vertical line in the outer margin of the page.
More informationMaintenance Manual 3-INCH INTERNAL VALVE F660 SERIES
Maintenance Manual 3-INCH INTERNAL VALVE F660 SERIES REVISION 1.1 03/15/2002 LIST OF EFFECTIVE PAGES On a revised page, the portion of text or illustrations affected by the change is indicated by a vertical
More informationGO-FER. One Machine for All Applications!
412-331-1776 www.bugo.com GO-FER IV 3 Year Warranty One Machine for All Applications! Bug-O Systems is guided by honesty, integrity and ethics in service to our customers and in all we do. The GO-FER IV
More informationINDUSTRIAL SPECIALTY GAS/LASER MEDICAL. Industrial Manifolds. Two Gas Blender Systems. Specialty Gas and Laser Manifolds
INDUSTRIAL 8-19 Industrial Manifolds 20-22 Two Gas Blender Systems Manifold Selection Guide...8 Series 200 Single Regulator Manifold...10 Series 210 Pressure Differential Switchover...12 Series 220 Pressure
More informationTECHNOLOGY FOR THE WELDER S WORLD. PLASMA CATALOG 4.1. Plasma Cutting and Welding Technology for all Metalworking Industries.
TECHNOLOGY FOR THE WELDER S WORLD. PLASMA CATALOG 4.1 Plasma Cutting and Welding Technology for all Metalworking Industries. www.binzel-abicor.com Content Plasma Cutting Torches Plasma Cutting Torches
More informationSERIES 270A HIGH SIDE FLOAT VALVES BULLETIN 270A-SB11-02 SERVICE BULLETIN
VALVES VESSELS SYSTEMS CONTROLS SERIES 270A HIGH SIDE FLOAT VALVES BULLETIN 270A-SB11-02 SERVICE BULLETIN System drawings shown in this bulletin are for illustration purposes only. Refrigeration systems
More informationAquaSense TM ZEG Series
AquaSense TM EV ZEG Series Automatic Sensor-Operated, Battery-Powered Flushometer Installation, Operation, Maintenance, and Parts Manual Patented and Patents Pending ZEG6003EV Flushometer for Z5798 Low
More informationBefore installation these instructions must be fully read and understood
Before installation these instructions must be fully read and understood Yoke bushing Split gland bushing One-piece body with accessible internals Gland Swing bolts Fully retractable stellite disc Figure
More information627 Series Pressure Reducing Regulators
627 Series Pressure Reducing Regulators Introduction The 627 Series direct-operated pressure reducing regulators (Figure 1) are for low and high-pressure systems. These regulators can be used with natural
More informationLX SERIES Low-Pressure Gas Compressors
70 to 140 psig Inlet Pressure Pressure 1500 PSI 70 80 90 100 110 120 130 140 C1.5-03-70/140LX 3 3.7 4.2 4.6 5.0 5.5 5.9 6.4 6.8 C1.5-05-70/140LX 5 6.1 6.8 7.6 8.3 9.0 9.7 10.4 11.1 C1.5-10-70/140LX 10
More informationLX-SERIES Low-Pressure Gas Compressors
70 to 140 psi Inlet Pressure Pressure 1500 PSI 70 80 90 100 110 120 130 140 C1.5-03-70/140LX 3 3.9 4.4 5.0 5.4 5.8 6.3 6.9 7.3 C1.5-05-70/140LX 5 6.4 7.2 8.1 8.7 9.4 10.3 11.3 11.9 C1.5-10-70/140LX 10
More informationModule. Section 9. NOTE: This section applies to applicators with CC200 modules B Issued 6/01. Manual 42-CF200-CM-01
Section 9 NOTE: This section applies to applicators with CC200 modules. 9-0 Table of Contents i Table of Contents Section 9 1. Introduction............................................... 9-1 2. Specifications.............................................
More informationMAINTENANCE MANUAL DI 16
MAINTENANCE MANUAL DI 16 0.2-1.6% Press Ctrl + L for full screen 1 STANDARD INSTALLATION Inlet Outlet Optional accessories: Pressure regulator Solenoid valves Water meter Flow restrictor 200 Mesh/ 80 micron
More informationTECHNOLOGY FOR THE WELDER S WORLD. PLASMA. Product Catalogue 2.2 / V1.
TECHNOLOGY FOR THE WELDER S WORLD. PLASMA Product Catalogue 2.2 / V1 www.binzel-abicor.com Content Plasma Cutting Torches Plasma Cutting Torches ABIPLAS CUT air cooled Page 04 05 ABIPLAS CUT 70 / ABIPLAS
More informationTRUNNION MOUNTED METAL SEATED BALL VALVES
TRUNNION MOUNTED METAL SEATED BALL VALVES HIGH PERFORMANCE BALL VALVES FOR SEVERE SERVICES PROCESS VALVES STANDARD FEATURES FOR SIDE ENTRY & BOTTOM ENTRY DESIGN 1. Trunnion Mounted The ball is trunnion
More informationVictor_Technologies_Price_Book
Thermal Arc W1003202 TAI 95 S,TOOLBOX,W/STICK KIT 822635006239 EA 372.00 Thermal Arc W1003203 TAI 95 S,TOOLBOX,TIG/STICK KIT 822635006352 EA 544.00 Thermal Arc W1003603 TAI 161S,TOOLBOX,TIG/STICK KIT 822635012339
More information3M Overhaul Service Kit
SERVICE INSTRUCTIONS FOR 3M 12,000 RPM 5 in. (127 mm) and 6 in. (150 mm) RANDOM ORBITAL SANDERS 3M Overhaul Service Kit The part number 20347, 3M Overhaul Service Kit, contains all the replacement parts
More informationSpring Special. 1 October - 30 November 2012 GLFS0012 R R GLFS0008. Micro - Tec
Spring Special *All Prices Incl VAT* E&OE 1 October - 30 November 2012 MSS9600 61pc Tool Set R2 502.00 1/2 Socket Sizes (12 Point): 8 10 11 12 13 14 15 16 17 18 19 20 21 22 24 27 30 32 1/2 Reversible Ratchet
More informationHydra Series Choke Valve **Patent Pending
Hydra Series Choke Valve product of GI Industries Hydroplex Choke Valve Hydroplex chokes are Multiple Orifice Valves (MOV) specifically designed to control high pressure liquids and gases while providing
More informationJ-Series High Pressure Regulators
J-Series High Pressure Regulators The LowFlow J-Series consists of the JR Series, which are pressure reducing valves, and the JB Series, which are back pressure regulating valves. The J-Series regulators
More informationPLASMA. Product Catalogue 2.0/V1.
T E C H N O L O G Y F O R T H E W E L D E R S W O R L D. PLASMA Product Catalogue 2.0/V1 www.binzel-abicor.com Content Plasma Cutting Torches Plasma Cutting Torches ABIPLAS CUT air cooled Page 04 05 ABIPLAS
More informationINDUSTRIAL CUTTING AND GOUGING EQUIPMENT. esab.com
INDUSTRIAL CUTTING AND GOUGING EQUIPMENT esab.com TABLE OF CONTENTS MANUAL GOUGING TORCH & CABLE ASSEMBLIES Gouging Torches (600-1000 Amp).... 4 K3000... 6-7 K4000... 6-7 Tri-Arc Foundry Gouging Torches
More informationTRIAC S. Plastic Welding > Hand tools > TRIAC S. SPECIFICATIONS PLASTIC WELDING, PROCESS HEAT, LASERSYSTEMS, MICROSYSTEMS
TRIAC S The economical hand tool. Deployed worldwide and very reliable, compact and robust. - Adaptor tube with heat protection - Electronic heating element protection - Motor shut-off at minimal carbon
More informationSPARE PARTS CATALOGUE SAFETY WELDING & CUTTING
SPARE PARTS CATALOGUE SAFETY WELDING & CUTTING Delivery within 24 hours from stock! (The Netherlands) Katje Welding bv, De Steven 4, NL-9206 AX Drachten, PO Box 5, NL-9200 AA Drachten, tel. +31-512-532829,
More informationFlexGun Welding Guns. Ver. 1.5
FlexGun Welding Guns Ver. 1.5 FlexGun - The Standard for Welding Excellence Resistance welding gun technology has advanced considerably since the introduction of transformer weld gun packages. As a pioneer
More informationJET FORMING. Brakes Shears Rolls Rotary and Hand Notcher Machines Presses
Brakes....................................... 111 Shears....................................... 114 Rolls........................................ 115 Rotary and Hand Notcher Machines.............. 117
More informationPressure Relief Valve Maintenance Manual
Technical Manual 1098T Pressure Relief Valve Maintenance Manual Farris Engineering Division of Curtiss-Wright Flow Control Corporation TABLE OF CONTENTS - Manual Revision 0 Introduction & Safety Tips...
More informationTRIAC PID. Plastic Welding > Hand tools > TRIAC PID. SPECIFICATIONS PLASTIC WELDING, PROCESS HEAT, LASERSYSTEMS, MICROSYSTEMS
TRIAC PID The tried and tested hand tool for the specialist. With stepless temperature regulation and digital display. - Reproducible results thanks to digital display of set and actual temperature - Welding
More informationCatalogue for Portables
Catalogue for Portables Applications Portable Cutting Machines Application/Type Straigt Line Shape Hole Curved Line H-shape steel Various steel shape Pipe Square pipe Vertical surfaces Beaver Handy Auto
More informationP627 High Flow Gas Regulator
P627 High Flow Gas Regulator Wide of Flow Capacities Durable Powder Coated Exterior Installation Versatility NACE Construction Available The P627 is a spring loaded, direct-operated regulator for both
More informationMaximise Your Product Sales!
Merchandising Catalogue Maximise Your Product Sales! Updated 09.02.2018 Helping our Distributors be more successful Take a stand with Weldclass... and watch your sales grow! Page 2 of 13 Helping our Distributors
More informationMAXPRO200 Instruction Manual Revision 2 99 Estimated kerf-width compensation The kerf widths in the following charts are for reference. Differe
Hypertherm Dross Low-speed dross forms when the torch s cutting speed is too slow and the arc shoots ahead. It forms as a heavy, bubbly deposit at the bottom of the cut and can be removed easily. Increase
More informationMaintenance Manual. 4-Inch Internal Valve. F614 Series
4-Inch Internal Valve F614 Series LIST OF EFFECTIVE PAGES On a revised page, the portion of text or illustrations affected by the change is indicated by a vertical line in the outer margin of the page.
More informationMERCER VALVE SERIES Flanged THINK...MERCER FIRST MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY
9100 SERIES Flanged THINK...MERCER FIRST MERCER VALVE MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY 9100 Series Product Overview The Mercer Valve 9100 Series Pressure Relief Valve is State of the Art in
More informationTurbo-Torch-220 Maintenance Manual. Turbo-Torch-220 Maintenance Manual Page
Turbo-Torch-220 Maintenance Manual 1 General Safety Precautions Never point the gun at anyone. Inspect hose before each use for breaks or weakened spots. Always shut off valve at tank when leaving the
More informationEconomical, Automated Pipe Cutter Saves Layout and Fit-Up Time
Economical, Automated Pipe Cutter Saves Layout and Fit-Up Time MM1 Programmable Pipe Cutter The MM1 is a computer-controlled machine that automates the cutting of profiles, holes, nozzles and shapes on
More informationH280-series Valve Overheat / Relocation Kit Instructions: Standard Oven. Instructions for Applying Kit #
H280-series Valve Overheat / Relocation Kit Instructions: Standard Oven Instructions for Applying Kit #4522559 This kit is for a Standard 36 oven only. For convection RC 36 oven, use Kit #4522368 Installation
More informationSM64052 Maintenance & Repair Manual Commercial 2" Unisex Coupling - Valved Model 64052
Aerospace Group Conveyance Systems Division Carter Brand Ground Fueling Equipment SM64052 July 2004 Applicable additional manuals: SM64051 Commercial 2" Unisex Coupling, Non-Valved Maintenance & Repair
More information