List of contents. Extraction Powered Support Shearer Steel plows. Heading. Logistics Transportation units Diesel trolley Diesel locomotives
|
|
- Tamsyn Newton
- 5 years ago
- Views:
Transcription
1
2 List of contents Extraction Powered Support Shearer Steel plows Heading Drilling jumbo Loader Dinting Loader Roadheaders Support platforms Logistics Transportation units Diesel trolley Diesel locomotives RAG Mining Solutions GmbH 2
3 Heading Extraction Powered Support Shearer Steel plows Heading Drilling jumbo Loader Dinting Loader Roadheaders Support platforms Logistics Transportation units Diesel trolley Diesel locomotives RAG Mining Solutions GmbH 3
4 Drilling jumbo type BTRK 2 Manufacturer Deilmann-Haniel Mining Systems GmbH Dimensions Length 13.5 m Height 1.75 m Width 1.70 m Total weight 25,000 kg Climbing power 18 Engine power 63 / 90 kw Pump output 2 x 110 l/min + 1 x 30 l/min each boom Booms 2 x BT 200 (1.30 m lift; optional 1.75 m) Electromotors and motor control units are not part of this set. A check for providing these parts can be done on request. RAG Mining Solutions GmbH 4
5 Drilling jumbo Type BTRK 2 Drill feed Drillhammer / rotary drilling machine Boom Control unit driving and drilling Engine box Screw compressor unit (optional) Protective cover electro unit Drill carriage Angle bracket Drive frame RAG Mining Solutions GmbH 5
6 Drilling jumbo type BTR 1 Manufacturer Deilmann-Haniel Mining Systems GmbH Dimensions Langth m Height 1.50 m Width 1.60 m Total weight 18,000 kg Climbing power 18 Engine power 63 kw Drill arm BT Electromotors and motor control units are not part of this set. A check for providing these parts can be done on request. RAG Mining Solutions GmbH 6
7 Drilling jumbo BTR 1 Drill hammer Drill arm Drill arm control unit Protective cover Drill arm Drive control unit Smear agregate Cable support Angle bracket Drill feed Drill carriage Drive frame Carrier vehicle Drive station Counterweight Main dimentions: Length = 11.9 m Width = 1.5 m Height = 1.6 m * Drill feed, drill carriage and drill hammer on request RAG Mining Solutions GmbH 7
8 Drilling jumbo BTR 1 Unit Drill jumbo, complete Manufacturer Type Manufact. No. Dimentions Total weigth Climbing power Stability Specifications DEILMANN-HANIEL Maschinen- und Stahlbau GmbH BTR 1 PST 384 K Ab 475 ME1 Length: 11.9 m; Heght: 1.6 m; Width: 1.5 m Approx. 18,000 kg 18 (20 gon) Please note the following! Detailed data and instructions can be found in the chapter Operation section Stability according to DIN EN 791 Undercarriage Type ME 1 Centre distance 2,515 mm Hydraulic system 1 e-motor, 63 kw, 500/1,000 V 1 hydraulic tank with return filters, temperature and level switches Hydraulic fluid HFC 46 Gears Drill arm Type BT Drill carriage 2 compact gears with hydraulically released multi-disc brakes and built-on drive motors with brake valves Type 2115 modified front part RAG Mining Solutions GmbH 8
9 Loader Type K 313-S / Potential Manufacturer Deilmann-Haniel Mining Systems GmbH Dimentions Length 6.93 m Height 1.67 m Width 1.63 m Total weight 12,500 kg Climbing power 22.5 Engine power 90 kw Bucket volume 1,000 1,200 l Slewing angle 2 x 20 Electromotors and motor control units are not part of this set. A check for providing these parts can be done on request. RAG Mining Solutions GmbH 9
10 Loader Type K 313-S Tiltingcylinder Swingarm Telescopic arm with inner telescopic cylinder Lifting cylinder Operating console Buffer tank Protective covers Tilting bucket Roll cylinder Under carriage Bearing block Turning cylinder Enginebox Main dimensions: Length: 6.93 m, with extended telescopic arm 7.83 m Width: 163m 1.63 Height: 2.00 m RAG Mining Solutions GmbH 10
11 Loader type G 210/211 / Potential Manufacturer Deilmann-Haniel Mining Systems GmbH Dimentions Length 8.00 m (extended 9.50 m) Height 2.30 m Width 1.88 m Total weight 22,310 kg Climbing power 22.5 Engine power 90 kw Bucket volume 2,000 l Slewing angle 2 x 20 Electromotors and motor control units are not part of this set. A check for providing these parts can be done on request. RAG Mining Solutions GmbH 11
12 Loader Type G 210/211 Tiltingcylinder Swingarm Telescopic arm with inner telescopic Lifting cylinder Operating console Electric Protection cylinder Protective bars Tilting bucket Roll cylinder Under carriage Bearing block Turning cylinder Enginebox Main dimensions: Length: 8.00 m, with extended telescopic arm 9.50 m Width: 188m 1.88 Height: 2.10 m, with extended protective bars 2.30 m RAG Mining Solutions GmbH 12
13 Dinting loader Type EL 160S Manufacturer Length Height Width Total weight Speed Engine power Bucket volume Hazemag & EPR 7.40 m 1.10 m 1.30 m 8,200 kg 0.37 m/s 55 kw 300 l Electromotors and motor control units are not part of this set. A check for providing these parts can be done on request. RAG Mining Solutions GmbH 13
14 Dinting loader Type EL 160S RAG Mining Solutions GmbH 14
15 Dinting loader Type DC 1000R Manufacturer Length Height Width Total weight Speed Engine power Bucket volume Hazemag & EPR 7.50 m 1.00 m 1.10 m 9,200 kg 0.35 m/s 63 kw 300 l Electromotors and motor control units are not part of this set. A check for providing these parts can be done on request. RAG Mining Solutions GmbH 15
16 Dinting loader Type DC 1000R RAG Mining Solutions GmbH 16
17 DH 250 T Loader Manufacturer Length Height Width Total weight Speed Engine power Bucket volume Deilmann Haniel 6.73 m 1.22 m 1.15 m 9,200 kg 0.35 m/s 63 kw 500 l RAG Mining Solutions GmbH 17
18 DH 250 T Loader Lifting cylinder Electric Protection Rock bucket Telescopic arm with inner telescopic cylinder Extra tank Protective bars Swing arm Roll cylinder Under carriage Bearing block Enginebox Main dimensions: Length: 6.73 m, with extended telescopic arm 7.43 m Width: 115m 1.15 Height: 1.22 m, with extended protective bars 2.00 m RAG Mining Solutions GmbH 18
19 Roadheader Type AM 105 G Manufacturer Sandvik Mining and Construction GmbH (ehem. Voest-Alpine Bergtechnik) Length approx m Height 2.40 m Width undercarriage 3.05 m Width loading platform m Width Tracks 0.89 m Total weight 120,000 kg Cutting profile Height m Cutting profile Width m by +/- 37 Cutting profile cross section m² Engine power 540 kw, total (1,000 V / 50 Hz) Speed m/min Conveyor speed 0.8 m/s (double chain conveyor) Anchoring platform, access platform, dust removers and other components are not included in this set. A check for providing these parts can be done on request. RAG Mining Solutions GmbH 19
20 Roadheader Type AM 105 G RAG Mining Solutions GmbH 20
21 Roadheader Type AM 105 G 1 Cutting arm 2 Slewing mechanism 3 Loading system 4 Chain conveyor 5 Tracks 6 Frame 6. Back end supports 7 Electrics 8 Hydraulics 8.2 Lubrication 9 Cooling system 9.1 Sprinkler system 12 Display Additional Equipment: 13 Working platform 14 Anchoring and support platform 15 Dust removers 16 Anchor point RAG Mining Solutions GmbH 21
22 Roadheader Type AM 105 G Machine Nr Year of manufacture 2003 Last maintenance 2012 incl. rebuilt itsm Last operation Driven meters after last maintenance.: approx. 5,000 m Extracted material after maintenance: approx. 300,000 t RAG Mining Solutions GmbH 22
23 Roadheader Type MR 620 Manufacturer Sandvik Mining and Construction GmbH Length m Height 2.40 m Width undercarriage 3.05 m Width loading platform m Width Tracks 0.89 m Total weight 123,000 kg Cutting profile Height m Cutting profile Width m by +/- 37 Cutting profile cross section m² Engine power 540 kw, total (1,000 V / 50 Hz) Speed m/min Conveyor speed 0.8 m/s (double chain conveyor) Further development of the AM 105; Semi Automated t ITSM. Navigation, boundary detection, automated cutting. Anchoring platform, access platform, dust removers and other components are not included in this set.. An examination of items provided by the aforementioned components is available on request. RAG Mining Solutions GmbH 23
24 Roadheader Type MR 620 RAG Mining Solutions GmbH 24
25 Roadheader Type MR 620 Begehung Platform Sh Schneidarm Cutting Kettenförderer Belt conveyor Tracks Raupenfahrwerk Staubabsaugung Dust extraction Ladeeinrichtung Loading system Trockenschneidkopf Dry cutting head Bedüsungssystem Sprinkling system RAG Mining Solutions GmbH 25
26 Roadheader Type MR 620 Machine Nr Year of manufacture 2004 Last maintenance 2011 Last operation Driven meters after last maintenance approx. 7,000 m Extracted material after maintenance approx. 420,000 t RAG Mining Solutions GmbH 26
27 Roadheader Type MR 620 Machine Nr Year of manufacture 2005 Last maintenance 2009 Last operation (Parts marketing) * Driven meters after last maintenance approx. 8,000 m Extracted material after maintenance approx 480,000 t Machine Nr Year of manufacture 2009 Last maintenance none Last operation (Parts marketing) * Driven meters after last maintenance approx 9,000 approx m Extracted material after maintenance approx. 540,000 t * Parts marketing after the end of operation with detailed lists of components RAG Mining Solutions GmbH 27
28 Roadheader Type MR 620 Machine Nr Year of manufacture 2010 Last maintenance none Last operation (Parts marketing) Driven meters after last maintenance approx. 7,000 m Total extraction after maintenance approx. 420,000 t RAG Mining Solutions GmbH 28
29 Support setting platform Type AMG 2700 Manufacturer Length Height Width Total weight Lifting height Support carrier lowering ability GTA Maschinensysteme GmbH 983m(incl 9.83 (incl. drive) 0.75 m m 12,500 kg 1.0 m support setting device 2.24 m Support carrier longitudinal mobility 0.80 m Support carrier transversal mobility 0.20 m(+/-) Payload support setting device Payload work platform Max. fore pole length Max. stress 1,500 kg 1,500 kg 2.40 m 184 kn Track profile I-140 E RAG Mining Solutions GmbH 29
30 Support setting platform Type AMG 2700 Rockfall Shield 5, optional Support setting device Machine frame Abduction Pumping station Drive system Slewing mechanism - platform Slewing mechanism ASV Control stand incl. control unit RAG Mining Solutions GmbH 30
31 Support setting platform Type AMG 2800 Manufacturer Length Height Width Total weight Lifting height GTA Maschinensysteme GmbH m (incl. drive) 0.98 m m 15, kg 1.35 m support setting device Support carrier lowering ability 2.70 m Support carrier longitudinal mobility 0.80 m Support carrier transversal mobility 0.20 m (+/-) Payload support setting device Payload work platform Max. fore pole length 1,500 kg 1,500 kg 3.20 m Max. stress 236 kn Track profile I-140 E RAG Mining Solutions GmbH 31
32 Support setting platform Type 2800 Rockfall Shield, optional Machine frame Support setting device Drive system Slewing mechanism ASV Control stand incl. control unit Pumping station Slewing mechanism - platform RAG Mining Solutions GmbH 32
33 Conditions of sale and delivery Equipped illustrated in the catalogue are usually in need of repairs. Without repairs the equipment might not be fully usuable. Pictures of the equipment are examples. Pictures are only for understanding the use of the illustrated equipment. The equipment for sale is sold in used condition, that is partly still in use. Therefore illustrations are only an example. For sales general buisness conditions of RAG Aktiengesellschaft apply. These are found on the homepage of RAG Mining Solutions GmbH ( and are part of the binding offer. RAG Mining Solutions GmbH 33
34 Contact Managing Director Prof. Dr. Martin Junker Phone: Fax: Martin.Junker@ragms.com RAG Mining Solutions GmbH Shamrockring Herne Germany Phone: Fax: Your contacts Sales of Equipment Philipp Martin Phone: Fax: Philipp.Martin@ragms.de Stefan Cebula Phone: Fax: Stefan.Cebula@ragms.com Atilla Ünal Phone: Fax: Atilla.Uenal@ragms.com RAG Mining Solutions GmbH 34
The Company. RAG Mining Solutions GmbH 2
The Company RAG Mining Solutions GmbH brings German mining know-how to the international market and offers a wide range of consulting and engineering services together with training sessions in the following
More informationBolter Miner ABM Technical Description
Bolter Miner -016 Bolter Miner -016 TABLE OF CONTENTS 1 TECHNICAL DESCRIPTION 1.1 General 1. Technical data 3 1.3 Dimensions of the machine 6 1.4 Cutter head profile 6 MACHINE CONCEPT - MAJOR COMPONENTS
More informationRoadheaders. Groundbreaking Solutions for Mining & Tunnelling.
Roadheaders Groundbreaking Solutions for Mining & Tunnelling www.schmittwerke.com Features Benefits Robust, modular design Durability Ease of transport and assembly Transverse ripping cutting heads Suitable
More informationCatalogue Surface equipment Mine Saar
Catalogue Surface equipment Mine Saar Terms and Conditions of Sale and Delivery The equipment illustrated in the catalogue usually need to be repaired. Without repairment the equipment is not or not fully
More informationCatalogue Surface Equipment Mine Ost
Catalogue Surface Equipment Mine Ost Terms and Conditions of Sale and Delivery The equipment illustrated in the catalogue usually need to be repaired. Without repairment the equipment is not or not fully
More informationCatalogue Surface equipment Mine West
Catalogue Surface equipment Mine West Terms and Conditions of Sale and Delivery The equipment illustrated in the catalogue usually need to be repaired. Without repairment the equipment is not or not fully
More informationPERFECT IN TUNNELING
Produced by KAELBLE GmbH PERFECT IN TUNNELING TUNNEL EXCAVATORS TE210 DIESEL & TE210E ELECTRO www.kaelblegmbh.com SCHAEFF TUNNEL EXCAVATOR UNCOMPROMISING TUNNEL HEADING MACHINE Tunnel heading is extremely
More informationLEOPARD DI650i TIME FOR A NEW LEADER
LEOPARD DI650i TIME FOR A NEW LEADER RELIABLE AND ROBUST MAIN COMPONENTS For over 50 years, we have claimed widespread expertise in developing drill rigs to meet your expectations. With that expertise,
More informationDeltaBase 102 Technical Data Sheet
Release Date: Sept 16th 2008 Page 1 of 6 PRODUCT OVERVIEW The DeltaBase 102 Anchor drill rig for double-head drilling systems, rotary / percussion operations is specially designed for the following key
More informationMining Machines Division BELT CONVEYORS
BELT CONVEYORS BELT CONVEYORS Belt conveyors are intended for transport of loose materials. They meet requirements for use in gassy coal-mines with danger of methane and coal dust explosion. Belt width
More informationSANDVIK DT922i THE ULTIMATE ALL-ROUNDER
SANDVIK DT922i THE ULTIMATE ALL-ROUNDER SEE THE BIG PICTURE At Sandvik, we have worked with drilling solutions for more than 50 years creating cutting-edge technology to serve you with the best solution
More informationWelcome to Sandvik Construction A world leader in Construction
Welcome to Sandvik Construction A world leader in Construction 1 Welcome to Sandvik Construction Safety first Safety is our top priority Protective Equipment Emergency Number Emergency Exit Assembly Point
More informationValueLine. BAUER BG 26 Rotary Drilling Rig Base Carrier BT 70
BAUER Rotary Drilling Rig Base Carrier BT 7 The BAUER BG The BG Perfection is achieved when there is nothing left to take away. Drilling uncased deep boreholes stabilized by drilling fluid, or drilling
More informationHydraulic lift crane LR 1110 LR
Hydraulic lift crane LR 111 EN LR 11.2 Concept and characteristics LR 111 Standard Excellent lifting capacities thanks to optimized distribution of forces New cabin with improved and ergonomic operating
More informationPRODUCT NEWS AND DEVELOPMENTS 2016
PRODUCT NEWS AND DEVELOPMENTS 2016 By Chris Goebel June 2016 Seite 1 ER50 >> With stronger picks ER50 cutting drums with pick box PH50N (i.e. 2 x 28 picks with 15 mm shank diameter) Previous ER50 cutting
More informationcompact bucket wheel excavator SRs(H) /2.0 TENOVA. innovative solutions for metals and mining
compact bucket wheel excavator SRs(H) 1050.23/2.0 TENOVA. innovative solutions for metals and mining Compact Bucket Wheel Excavator SRs(H)1050 Capacity (heaped) 4.800 m³/h Specific digging force 1000 N/cm
More informationAccessories: Dust collector. Slope winch. Bit grinder Application: Water wells
Deltabase 430 - DTH drill rig Deltabase 430 - DTH drill rig Deltabase 430 is a compact, lightweight drill rig especially designed for DTH work on modern job sites. The DB 430 is optimised to drill 4 to
More informationPRELIMINARY NEW! 186 kw. 40 t. Heavy Duty Cycle Crawler / Crane 41.1 m TIER IV
PRELIMINARY NEW! 1 kw 0 t Heavy Duty Cycle Crawler / Crane 1.1 m TIER IV Further developed. The E-Series. The characteristics of the E-Series 0 years of experience in the design and construction of duty
More informationDeltaBase 540 Technical Data Sheet
Release Date: May 10th, 2008 Page 1 of 7 PRODUCT OVERVIEW The DeltaBase 540 is a powerful and versatile Multipurpose drill rig. With the ability to perform coring, DTH drilling, rotary flush, auger drilling
More informationTE 210. te210 TUNNEL EXCAVATOR. Technical Main Data. For heading in soft to medium hard ground Tunnel excavation boom with swivel dipper stick
te210 TUNNEL EXCAVATOR Equipment: Standard dipper stick 3780 mm Ripper bucket with quick hitch CW40 Technical Main Data Maximal vertical reach mm 8.500 Maximal boom reach mm 3.900 Minimal operating height
More informationGrab System. BAUER GB 50 Hydraulic Grab Carrier
Grab System BAUER GB 50 Hydraulic Grab Carrier GB 50 Digging profits out of your projects Bauer s line of GB rigs are a perfect marriage between our tried-and-true base machines with our state-of-the-art
More informationCrawler Crane LR
Crawler Crane LR 1130 EN LR 1002.03 Dimensions Basic machine with undercarriage R 6530 2970 85 6050 3040 1954 1530 3640 1250 6750 7970 3355 1360 1000 6350 440 1345 R 5700 13930 5310 Operating weight The
More informationCummins / 6CTA8.3-C or Rhino Tier 2 (Tier 3, Tier 4) 6 8.3(506) 188(252) Direct Injection Turbocharged, air-to-air charge air cooler COOLING Fan Drive
330 EXCAVATOR ENGINE Engine Make/ Engine Model Emission Rating (optional) Cylinders Displacement L (cu. In) Net Power kw (Hp) @2,200 rpm Fuel System Aspiration Cummins / 6CTA8.3-C or Rhino Tier 2 (Tier
More informationFRD has a lot of missions on the world for the next generation.
Drill Jumbo catalogue Drill Jumbo catalogue FRD has a lot of missions on the world for the next generation. 1-5-3, Nihonbashi, Chuo-ku, Tokyo 103-0027, Japan Phone +81-3-3231-6982 Fax +81-3-3231-6994 ISO9001,
More informationPiling Rig LRH 100 LRH
Piling Rig LRH 1 EN LRH 31.5 Concept and characteristics LRH 1 Leader top Leader top for auxiliary rope Auxiliary rope Leader Leader ball joint Hydraulic hammer Rope guide Boom Radius adjustment device
More informationThe most complete line of drilling rigs...
PRODUCTS RANGE The most complete line of drilling rigs... MAIT, a world leader with more than 50 years experience in manufacturing hydraulic drilling rigs, presents its wide range of machines able to satisfy
More informationPiling and drilling rig LRB
Piling and drilling rig LRB 15 51.4 Concept and characteristics LRB 15 Leader top Auxiliary winch Leader 1.5 m Vertical travel device Attachment with quick connection Inclination device Leader rotation
More informationPiling Rig LRH 100 LRH
Piling Rig LRH 1 EN LRH 31.5 Concept and characteristics LRH 1 Dimension and weights LRH 1 18.4 18.4 18.4 18.4 19 1998-243 6 45 875 368 R 376 9 44 545 Technical data Total height 19.98-24.3 m Max. pile
More informationMade in the Lüneburger Heide ORDER PICKING AND NARROW AISLE TRUCK THE NEW EK-SERIES
Made in the Lüneburger Heide ORDER PICKING AND NARROW AISLE TRUCK THE NEW EK-SERIES INNOVATIVE ECONOMICAL RELIABLE 7 MODELS TO MEET YOUR NEEDS SYSTEMS APPROACH TO WAREHOUSE LOGISTICS Innovative engineering
More informationATV ROTA-SONIC DRILL RIG (LS600)
ATV ROTA-SONIC DRILL RIG (LS600) TECHNICAL DATA SHEET GENERAL DESCRIPTION The GeoSonic Large Sonic (also known as the LS600 ATV) is a self-contained drill rig especially designed for sonic drilling through
More informationSeries. High performances Vertical machining centre. Performance Technology Power Accuracy
Series High performances Vertical machining centre Performance Technology Power Accuracy Series Powerful, Rapid, Accurate High Performance Vertical Machining Centre The VX range of vertical machining centres
More informationPiling and drilling rig LRB Courtesy of Machine.Market
Piling and drilling rig LRB 16 EN 51.6 Concept and characteristics LRB 16 Leader top Auxiliary winch Leader 1.5 m Leader vertical travel device Attachment with quick connection Leader inclination device
More informationTechnical Data Technical Data. 3.1 Views TE Fig. 3 Digging envelope TE2-03
Technical Data 3 3. Technical Data 3.1 Views 2400 4700 TE2-03 Fig. 3 Digging envelope TE 200 15 3 Technical Data 4400 4700 TE2-04 2500 3670 2150 Fig. 4 Tunnel profile 1160 2270 3030 3280 Fig. 5 Transport
More informationCrawler Crane LR 1200 LR
Crawler Crane LR 1200 EN LR 1004.02 Dimensions Basic machine with undercarriage R 8700 3500 9700 6050 3000 2150 1600 4600 1500 7520 8700 3740 1830 1200 7000 520 1345 R 6200 19200 7600 1200 5800 narrow
More informationCrawler Excavator 225LC, 225NLC 225LC ROBUST. PRECISE. ECONOMICAL. max. 23,9 t. 116 kw (158 hp) 0,43-1,37 m 3
Crawler Excavator 225LC, 225NLC 225LC ROBUST. PRECISE. ECONOMICAL. max. 23,9 t 116 kw (158 hp) 0,43-1,37 m 3 Technical specifications ENGINE (COM III) Power according to ISO 9249.116 kw (158 HP) Cylinder
More informationCrawler Crane LR 1250 LR
Crawler Crane LR 1250 EN LR 1004.02 Dimensions Basic machine with undercarriage R 8700 3500 9700 6050 3000 2150 1600 1345 4600 1500 7520 8700 3740 1830 1200 7000 520 R 6200 19200 7600 1200 5800 narrow
More informationATTENTION: The drawing shows machine, where right boom is equipped with optional telescopic feeder.
FACE MASTER Page 1 of 2.0 6 Twin boom drill rig ATTENTION: The drawing shows machine, where right boom is equipped with optional telescopic feeder. MAIN COMPONENTS Rockdrill Montabert HC 109 Boom B 40
More informationPiling and drilling rig LRB 16 LRB
Piling and drilling rig LRB 16 EN LRB 51.6 Concept and characteristics LRB 16 Leader top Auxiliary winch Leader 1.8 m Leader vertical travel device Attachment with quick connection Leader inclination device
More informationCM-70 HYDRAULIC CFA ROTARY RIG. In 1990 Soilmec was awarded with the certification of its Quality System complying with ISO 9001/UNI standards.
04/2005 1500 N Tuttastampa CM-70 In 1990 Soilmec was awarded with the certification of its Quality System complying with ISO 9001/UNI 29001 standards. SOILMEC S.p.A. CM-70 HYDRAULIC DRILLING CFA ROTARY
More informationROBUST. PRECISE. EFFICIENT.
max. 40 t 180 kw (245 HP) 0.80-1.60 m 3 ROBUST. PRECISE. EFFICIENT. WHEELED CRAWLER EXCAVATOR 340LC 150W WWW.ATLASGMBH.COM TECHNICAL SPECIFICATION 340LC Technical Specification ENGINE Power according to
More informationCrimping and cutting tools FHP 2 PHD 1. Hydraulic drive units. Foot pump 700 bar
FHP 2 Foot pump 700 bar Two stage hydraulics Manual retraction in case of need, even at high pressure Sturdy design Automatic pressure switch off High-pressure hose, 2 m 12.0 kg Foot pump 700 bar FHP2
More informationTest report No.: VU
Department of Environmental / Vibration Engineering Test report No.: 2017-0277-VU Date of test: June - July 2017 Testers: No. of pages: 13 Applicant/ manufacturer: Test specimens: Test procedures / bases:
More informationTechnical data Hydraulic crawler crane HS 8040 HD
Technical data Hydraulic crawler crane HS 8040 HD Dimensions Basic machine with undercarriage 2860 7350 3000 1700 1060 3300 1200 2340 4610 5460 R = 3900 700 4200 310 4200 990 11240 Operating weight The
More informationModifications The Beco program
Modifications The Beco program For modification of each type of excavators. Smart. Solid. BE COmplete, opt for Beco For every job the right machine. Beco can modify your machine. We are specialized in
More informationUnprecedented precision and ease of operation.
REX130 EXCAVATOR Unprecedented precision and ease of operation. This Rhino excavator is loaded with enhancements that not only increase productivity and uptime, but lower daily operating costs, too. A
More informationGround bearing pressure 1.1 kg/cm 2 2 HS 855 HD
The operating weight includes the basic machine with HD undercarriage, 2 main winches 250 kn including wire ropes (90 m) and 18 m main boom, 2x hose reels (1 m), each with 120 m of hydraulic hose, consisting
More information76,6 m 40,9 m. 16,5 t. 70,0 m 3,9 t ( 4,0 t) 2,0 m. 50,0 m 6,9 t ( 7,0 t) 40,0 m 9,2 t ( 8,3 t)
1 Schedule drawing 1.1 Schedule drawing 21,2 m 76,6 m 40,9 m 1,0 m 2,5 m 18,7 m 1,1 m 2,6 m 4,0 m 19,2 m - 24,6 m 16,5 t 1,9 m 7,7 m 75,0 m 3,2 t ( 3,3 t) 70,0 m 3,9 t ( 4,0 t) 2,0 m 60,0 m 5,2 t ( 5,3
More informationDOOFOR INC. THE COMPANY DOOFOR INC. PRODUCTS FROM NOKIA, FINLAND WITH DEDICATION. Enhance your solutions with efficient and versatile rock drilling
DOOFOR INC. THE COMPANY Enhance your solutions with efficient and versatile rock drilling Your partner from product development to end-user service Doofor Inc. produces always reliable and powerful rock
More informationROBBINS 34RH C. Low-profile raise boring machine for holes ranging from 0.6 to 1.5 m (2-5 ft.) in diameter.
ROBBINS 34RH C Low-profile raise boring machine for holes ranging from 0.6 to 1.5 m (2-5 ft.) in diameter. RAISING THE BAR IN VERSATILITY THE ROBBINS 34RH C IS A LOW-PROFILE, LIGHTWEIGHT RAISE DRILL RIG
More informationPRELIMINARY 10 / kw / 168 kw. 120 t. Telescopic Crawler Crane. 40 m. TIER IVf
164 kw / 168 kw 120 t Telescopic Crawler Crane 40 m TIER IVf Technical data - equipment MACHINE TYPE Model (type) 6113 Automatic central lubrication for boom pivot winch drum bearing Pinion lubrication
More informationForklift Truck Capacity to kg H 420 H 460 SERIES 356
Forklift Truck Capacity 42000 to 46000 kg H 420 H 460 SERIES 356 Safety Neutral start interlock preventing unintentional in-gear starting. Drive system inhibitors prevent incorrect downshift and reverse
More informationGround bearing pressure 0.98 kg/cm 2. Main boom (No xx) max. length Fixed jib (No xx)
The operating weight includes the basic machine with HD under carriage, 2 main winches 250 kn including wire ropes (90 m) and 11 m main boom, consisting of A frame, boom foot (5.5 m) and boom head (5.5
More informationRock Drilling Rig with Prime Double Rod System and with on board pump
Made in Germany Rock Drilling Rig with Prime Double Rod System and with on board pump HDD-Compact Rig for rock drilling equipped with double rod magazine First rock drilling rig in this high-performance
More informationwith movax sg-60 side
s CAT 328D LCR Excavator Piling Rig with movax sg-60 side grip hammer nchors n Free Piling ilter Weep Holes teel Sheet Piles etaining Walls Vinyl Piling Corner Piles Cofferdams t Basements oundations tory
More informationTechnical data Piling rig LRH 100
Technical data Piling rig LRH 1 Concept and characteristics Leader top for auxiliary rope Leader top Hydraulic hammer Auxiliary rope Leader Rope guide Leader ball joint Radius adjustment device Boom Pile
More informationPiling and drilling rig LRB 18. enus LRB
Piling and drilling rig LRB 18 enus LRB 51.6 Concept and characteristics LRB 18 Leader top Auxiliary winch Leader 49. ft Leader vertical travel device Attachment with quick connection Leader inclination
More informationPiling and drilling rig LRB
Piling and drilling rig LRB 355 54.5 Concept and characteristics LRB 355 Leader top adjustable incl. aux. winch 8 t Vertical travel device Leader. m Inclination device Attachment with quick connection
More informationAtlas Copco Pneumatic Surface Drill Rig ROC 442PC. Tophammer Crawler Rig. Hole range mm (1 5 / / 2 )
Atlas Copco Pneumatic Surface Drill Rig ROC 442PC 3 8 Tophammer Crawler Rig Hole range 41 115 mm (1 5 / 8 4 1 / 2 ) ROC 442PC the Workmate A tophammer crawler rig for 41 115 mm (1 5 /8 4 1 /2 ) holes.
More informationPiling and drilling rig LRB 355 LRB
Piling and drilling rig LRB 355 EN LRB 54.5 Concept and characteristics LRB 355 Leader top adjustable incl. aux. winch 8 kn Vertical travel device Leader. m Inclination device Attachment with quick connection
More informationHorizontal Directional Drilling Rigs t
Made in Germany Horizontal Directional Drilling Rigs 150-600 t HDD-Rigs 1,500 kn - 6,000 kn pull force (150 t - 600 t) 70 knm - 180 knm torque Horizontal Directional Drilling Rig, Frame Version the low
More informationHYDRAULIC EXCAVATORS HX230E I HX240E I HX270E I HX310E I HX390E HX500E I R964C I R974C
E HYDRAULIC EXCAVATORS HX230E I HX240E I HX270E I HX310E I HX390E HX500E I R964C I R974C This innovative system technology includes the exclusive energyefficient; Positive Control twin-circuit hydraulic
More informationUnderfloor Wheel Lathe Type U CNC-controlled machine with automatic measuring system
Underfloor Wheel Lathe Type U 2000-150 CNC-controlled machine with automatic measuring system...technology in motion Operative range and scope of application The modern underfloor wheel lathe does not
More informationTI_ Slewing tower crane. Technical information. English English. WOLFF cross
Slewing tower crane Technical information English English Published by WOLFFKRAN GmbH Austraße 72 74076 Heilbronn Germany Phone +49 7131 9815 0 Fax +49 7131 9815 355 www.wolffkran.com info@wolffkran.de
More informationAdvanced Cold milling machine for economical applications. Cold Milling Machine W 195
Advanced Cold milling machine for economical applications. Cold Milling Machine W 195 02 03 TWO-METRE FRONT LOADER IN TRIED-AND-TESTED DESIGN FOR EFFICIENT MILLING OPERATIONS. THE MACHINE IS SUITABLE FOR
More informationEN TRA ENGINEERING AND TRADING SRL
Foundation Equipment Grabs for diaphragm wall and piling Hydraulic Casing oscillators Power Packs Casing joints Stop-end pipes Water stop elements Hydraulic extractors Piling tools and accessories MADE
More informationSmartROC D50 and D55 DTH surface drill rig for quarrying and mining
SmartROC D50 and D55 DTH surface drill rig for quarrying and mining SmartROC D50 hole diameter: 90 130 mm (3.5 5.1") SmartROC D55 hole diameter: 90 152 mm (3.5 6") Drill rigs with intelligence and power
More informationHorizontal Directional Drilling Rigs t
Made in Germany Horizontal Directional Drilling Rigs 30-100 t HDD-RIGS 300 kn - 1,000 kn pull force (30 t - 100 t) 18 knm - 64 knm torque PRIME DRILLING operates worldwide and is specialised in Horizontal
More informationView thousands of Crane Specifications on FreeCraneSpecs.com. Technical data Hydraulic lift crane LR 1250
Technical data Hydraulic lift crane LR 1250 Dimensions Basic machine with undercarriage R 8700 3500 9700 6050 3000 2150 1600 1345 4600 1500 7520 8700 3740 1830 1200 7000 520 R 6200 19200 7600 1200 5800
More informationConstruction Machine HS enus HS
Construction Machine HS 8200 enus HS 8007.01 Concept and characteristics Basic machine HS 8200 with dragline equipment Main boom 2220.24 Pendant straps Hoist rope guide Hoist winch I Cabin Undercarriage
More informationHDD-Compact Drilling Rig with on board pump
Made in Germany HDD-Compact Drilling Rig with on board pump HDD-Compact Drilling Rig with on board X-pump, 300 kn - 800 kn pull force (30 t - 80 t) 18 knm - 45 knm torque PRIME DRILLING operates worldwide
More informationEC380EHR, EC480EHR VOLVO EXCAVATORS
, VOLVO EXCAVATORS Volvo, E480EHR in detail. Engine The latest generation, Volvo engine Tier 4f (Stage IV) emissions compliant diesel engine fully meets the demands of the latest, emsissions regulations.
More informationAC ALL TERRAIN CRANE
All Terrain Crane 200 t Lifting Capacity ALL TERRAIN CRANE Due to the newly optimized boom system, the has higher duties compared to its predecessor the AC 160-1 Very compact 5-axle crane with a carrier
More informationMade in the Lüneburger Heide ORDER PICKING AND NARROW AISLE TRUCK THE NEW EK-SERIES
Made in the Lüneburger Heide ORDER PICKING AND NARROW AISLE TRUCK THE NEW EK-SERIES INNOVATIVE ECONOMICAL RELIABLE 7 MODELS TO MEET YOUR NEEDS SYSTEMS APPROACH TO WAREHOUSE LOGISTICS Innovative engineering
More informationTechnical data Drilling rig LB 24
Technical data Drilling rig LB 24 Concept and characteristics Kelly rope Leader top for Kelly rope Leader top for auxiliary rope Tensioning cylinder for crowd system Rotary Kelly bar Inclination device
More informationWhy? Faster To reduce the duration of the process
BUTE Department of Construction Management and Technology 20.10.2015 Why? Faster To reduce the duration of the process Cheaper To reduce costs (where labour is expensive) Easier To reduce (heavy) manual
More informationTrenchers for Access network installation
Main Technical Specifications s for Access network installation MODEL GROSS POWER ENGINE WEIGHT RANGE ROCKSAW CHAINSAW BUCKET WHEEL ROCK HAWG 300 100 hp (74.5 kw) Perkins 1104D-44T 19,842-22,046 lbs (9.000-10.000
More informationBG 25C Rotary Drilling Rig Base Carrier BH 70 BH 70
BG 25C Rotary Drilling Rig Base Carrier BH 70 BH 70 Dimensions Crowd winch type The BG 25C rotary drilling rig has an operating weight of approx. 74 to and a torque of 245 knm. It is ideally suited for:
More informationTechnical data Hydraulic crawler crane HS 875 HD
Technical data Hydraulic crawler crane HS 875 HD Dimensions Basic machine with undercarriage R 5710 2580 8300 3500 2110 1300 1240 4020 1400 5330 2600 1000 530 6480 2240 4900 R 5520 14100 Operating weight
More informationRobbins 34RH. Low profile raiseboring machine for holes ranging from 0.6 to 1.5 m in diameter
Robbins 34RH Low profile raiseboring machine for holes ranging from 0.6 to 1.5 m in diameter 1 Raising the bar in versatility The Robbins 34RH is a low profile, lightweight raise drill rig for holes of
More informationCrawler excavator R 976
Crawler excavator R 976 Operating Weight with Backhoe Attachment: 85,3 95,5 kg Operating Weight with Shovel Attachment: 9,8 92,6 kg Engine Output: 4 kw / 544 P Bucket Capacity: 2. 6.6 m³ Shovel Capacity:
More informationPRELIMINARY. 92 kw. 16 t. Telescopic crawler crane. 24 m. Tier IV emission standards
9 kw 1 t Telescopic crawler crane m Tier IV emission standards Advanced. The E-Series What makes up the E-Series 197: TX telescopic crane Over 5 years of experience in construction and building of highly
More informationGrab System. BAUER GB 40 Hydraulic Grab Carrier
Grab System BAUER GB 40 Hydraulic Grab Carrier GB 40 Characterisation BAUER GB Line The BAUER GB 40 Hydraulic Grab Digging profits out of your projects Bauer s line of GB Hydraulic Grabs are a perfect
More informationTechnical data/component parts
Technical data/component parts Demag pillar and wall-mounted slewing jib cranes 191214 en GB 203 814 44 714 IS 132 Manufacturer Terex MHPS GmbH Forststrasse 16 40597 Düsseldorf, Germany www.demagcranes.com
More informationSONICOR 50K DRILL HEAD
SONICOR 50K DRILL HEAD The SONICOR 50K sends high frequency mechanical oscillations down the drill string to the bit. The operator controls frequencies to suit specific conditions of soil/rock geology.
More informationDrag Conveyors BASIC TYPES. We offer the following types of drag conveyors: Wall (face) conveyors: Gathering (under-face) conveyors:
Drag Conveyors BASIC TYPES We offer the following types of drag conveyors: Wall (face) conveyors: These conveyors are determined for work in forefields of underground mines. The lengths of the conveyors
More informationHydraulic Hammers Leaders - Accessories
Hydraulic Hammers Leaders - Accessories - The specialist for Hydraulic Pile-Driving Innovation - Time proven design - Environmental sensitivity Fambo is a technology orientated company, specialized in
More informationEmpty Container Handler Capacity 9000 kg 4000mm wheelbase C90/5, C90/6, C90/7 SERIES 318
Empty Container Handler Capacity 9000 kg 4000mm wheelbase C90/5, C90/6, C90/7 SERIES 318 Technical data Safety Perfect load control and maneuverability in close surroundings is assured at all times. Linde
More informationTechnical data Piling rig LRH 100
Technical data Piling rig LRH 100 Concept and characteristics Leader top for auxiliary rope Leader top Hydraulic hammer Auxiliary rope Rope guide Leader ball joint Boom Leader Radius adjustment device
More informationProduct Line Overview/Comparison
Product Line Overview/Comparison Design types Series Sizes Raceway diameters Maximum torque 1) Maximum tilting moment 1) 2) Static axial load rating Load carrying capacity 1) Static radial load rating
More informationTechnical Description R 9350 Hydraulic Excavator
Technical Description R 9350 ydraulic Excavator litronic` Operating Weight with Backhoe Attachment 302,0 t/665,800 lb Operating Weight with Shovel Attachment 310,0 t/683,400 lb Engine Output 1120 kw (1500
More informationFlexiROC T15 R Surface drill rig for quarrying and construction
FlexiROC R Surface drill rig for quarrying and construction Hole diameter: 27 51 mm (1" 2") Productivity in a small package When small holes mean big business, the FlexiROC R drill rig is your best friend.
More informationTechnical data Hydraulic crawler crane HS 835 HD
Technical data Hydraulic crawler crane HS 835 HD Dimensions Basic machine with undercarriage 2860 7360 3000 1700 1120 3260 990 1200 2360 4710 5650 1220 700 4300 310 R 4050 11250 Operating weight The operating
More information2. Crane standing on firm, horizontal ground.
The operating weight includes the basic machine with HD undercarriage, 2 main winches 200 kn including wire ropes (90 m) and 11 m main boom, consisting of A frame, pulley block, boom foot (5.5 m) and boom
More informationEmpty Container Handler Capacity 9000 kg C90/5, C90/6, C90/7 SERIES 318
Empty Container Handler Capacity 9000 kg C90/5, C90/6, C90/7 SERIES 318 Technical data Safety Perfect load control and maneuverability in close surroundings is assured at all times. Linde archives this
More informationD90KS and 1190E blasthole drills
D90KS and 1190E blasthole drills Sandvik is a high-technology engineering group with world-leading positions in selected areas tools for metal working, advanced materials technology, and mining and construction.
More informationTechnical data Hydraulic crawler crane HS 895 HD
Technical data Hydraulic crawler crane HS 895 HD Dimensions Basic machine with undercarriage R 9760 3650 10000 5480 3675 2445 1810 3950 1610 1700 7945 9360 3975 1720 R 6360 1100 6800 620 17380 Operating
More informationBlast hole drilling rigs - SBM series
Blast hole drilling rigs - SBM series Nordmeyer SMAG SBM Series Blast Hole Drilling Rigs: modern, efficient, powerful, reliable. SBM Drilling Rigs represent cost-effective drilling using both rotary drilling
More informationLVE - with integrated pneumatic cylinder
LVE - with integrated pneumatic cylinder APPLICATION Optimally suited for flange, bar and tube machining, especially for machines without a clamping cylinder. TYPE Power chuck with integrated pneumatic
More informationDR460 blasthole drill
DR460 blasthole drill Class leader performance engineered In its class of blasthole drills, the DR460 is the benchmark for user approval, reliability, and drilling productivity. Its applications include
More information5200 ITH Specifications and Features
2003 Specifications and Features 5200 ITH The 5200 is a track mounted ITH drill designed to drill with In-The-Hole hammers powered with high air pressure. This drill is unitized with an on board reciprocating
More information