ATTENTION: The drawing shows machine, where right boom is equipped with optional telescopic feeder.
|
|
- Paul West
- 5 years ago
- Views:
Transcription
1 FACE MASTER Page 1 of Twin boom drill rig ATTENTION: The drawing shows machine, where right boom is equipped with optional telescopic feeder. MAIN COMPONENTS Rockdrill Montabert HC 109 Boom B 40 L Diesel engine Deutz TCD2012L PRM, liquid cooled Feeder F 7000 series Tires x 20 FEATURES WEIGHT DIMENSIONS Length (with 14ft feeder) Width Max. height Turning radius Admissible along gradeability Admissible cross-grade kg mm mm mm Ri = mm Ro= mm 10 degrees 5 degrees
2 FACE MASTER Page 2 of Turning radius (with 14ft feeders) Coverage 67m2 in auto parallel mode
3 FACE MASTER Page 3 of BOOM Boom extension Boom Lift Boom Swing Feeder rotation Feeder crowd Feeder swing B 40 L mm +40 /-30 +/ mm +40 /-40 Feeder tilt 0-90 Weight kg FEEDER F-7000 series The feed frame is of aluminum alloy fitted with easily replaced, hollow stainless steel wear rails to carry the rockdrill cradle, moving guide and hose reeler. The bottom pair of these rails provide the connection with the slide support frame. The sliding fit of the rockdrill cradle and other moving parts is adjusted by means of setscrews. Rockdrill feed is provided by an internally housed hydraulic cylinder and wire rope arrangement which provides a feed force of 15,5 KN. Type Overall length Hole depth Rod length Weight F-7000 (14ft) mm mm mm 850 kg CARRIER Diesel engine Tramming Transmission Torque converter Axles Deutz TCD2012L rpm, liquid cooled Four wheel drive (Power shift) 1120MT12441 Dana Off-Highway Transmission integrated 113 Dana Off-Highway front and rear Articulation Danfoss Orbitrol controlled by steering wheel Brakes Fail-safe, wet multi-disc service brakes with additional fail-safe emergency-parking brake Tires x 20 Fuel tank Electrical control system Battery Driving lights Automatic centralized lubrication system 100 l 24 V 2 x 12 V 4 x 35W LED SKF (VOGEL)
4 FACE MASTER Page 4 of HYDRAULIC SYSTEM Hydraulic pump Percussion Feed Rotation Tank of oil with oil level indicator, return filter Filtration Oil cooler Axial-piston with load sensing for percussion and two gear pump for rotation and feed 140 bar 80 bar 100 bar 260 l 10 ųm Water cooling system Hydraulic oil HV 68 WATER SYSTEM Water booster pump Max. capacity Min. inlet pressure Water hose reel Capacity rotodynamic pump 90 lpm 2 bar MINE MASTER -80 m (prepared for 1 ½ water hose) 80 m AIR SYSTEM Compressor Capacity Screw type m 3 /min ELECTRICAL SYSTEM Motor Voltage Working lights Cable reel Capacity 2 x 55 kw 400V, 50 Hz 2 x 35W LED + 2 x 35W xenon type MINE MASTER 80 m ROCKDRILL Montabert HC 109 Shank adapter Weight Impact power Percussion oil flow Rotation speed Rotation torque R38, T kg 19,4 kw bar max. 275 RPM max Nm
5 FACE MASTER Page 5 of OPTIONAL EQUIPMENT FIRE SUPPRESSION SYSTEM FIRE SUPPRESSION SYSTEM WITH FLAME DETECTION BY PASS FILTRATION AIR-MIST SYSTEM WITH 400L TANK AIR-MIST SYSTEM WITH CONNECTION TO LOCAL WATER NETWORK SPARE WHEEL ANSUL LT-A , 6 nozzles, activated manually ANSUL LT-A SC-N with Checkfire, 6 nozzles, activated automatically Additional recirculation independent hydraulic filtration system for both tramming and drilling systems Mounted instead of water hose reel; additional air-coolers and more efficient compressor added System with additional air-coolers and more efficient compressor x 20 (including rim and tyre) HAND PUMP TO RELEASE EMERGENCY/ PARKING BRAKES FEEDER GUIDING SYSTEM VOLTAGE to suit customer s requirements ELECTRIC CABLE 400V 4x95 mm 2 FEEDER F-7000 series The feed frame is of aluminum alloy fitted with easily replaced, hollow stainless steel wear rails to carry the rock drill cradle, moving guide and hose reel. The bottom pair of these rails provides the connection with the slide support frame. The sliding fit of the rock drill cradle and other moving parts is adjusted by means of setscrews. Rock drill feed is provided by an internally housed hydraulic cylinder and wire rope arrangement which provides a feed force of 15,5 KN. Type 8ft 10ft 12ft Overall length mm mm mm Hole depth mm mm mm Rod length mm mm mm Weight 760 kg 790 kg 820 kg
6 FACE MASTER Page 6 of TELESCOPIC FEEDER The telescopic feeder allows to drill face blast hole as well as bolt hole in the roof. Model number Rock drill type Type of rods Length of rods Min-Max [mm] Max. depth of drilled hole [mm] Overall length collapsed extended [mm] MMTF3700/2440-HC109 HC 109 8ft - 12ft MMTF3700/2800-HC109 HC 109 9ft - 12ft MMTF4310/2440-HC109 HC 109 8ft 14ft MMTF4310/2800-HC109 HC 109 9ft 14ft
Boomer 281 face drilling rig. Mining one-boom face drilling rig for medium sized underground drifts, with maximum coverage area 31 m 2
Boomer 281 face drilling rig Mining one-boom face drilling rig for medium sized underground drifts, with maximum coverage area 31 m 2 1 Durable and reliable rig Time-proven powerful tool for your continuous
More informationBoomer face drilling rig. Mining one-boom face drilling rig for medium sized underground drifts, with maximum coverage area 33 m 2
Boomer 281-15 face drilling rig Mining one-boom face drilling rig for medium sized underground drifts, with maximum coverage area 33 m 2 1 Durable and reliable rig Time-proven powerful tool for your continuous
More informationBoomer M2 Battery. Effectively powered the Boomer M2 Battery is a battery powered face drill rig with zero emissions for coverage areas up to 65 m 2
Boomer M2 Battery Effectively powered the Boomer M2 Battery is a battery powered face drill rig with zero emissions for coverage areas up to 65 m 2 Boomer M2 Battery Cutting costs and boosting productivity
More informationBOOMER T. Single-boom face drilling rig for narrow drifts and tunnels with cross sections up to 23 m 2
BOOMER T Single-boom face drilling rig for narrow drifts and tunnels with cross sections up to 23 m 2 PRIME PERFORMANCE PACKED INTO A SMALL, VERSITILE UNIT THE BOOMER T1 D IS AN IDEAL RIG FOR NARROW VEIN
More informationSimba K102 production drill rig. Hydraulic production drill rig for long-hole mining
Simba K102 production drill rig Hydraulic production drill rig for long-hole mining 1 Get into your tunnel The simple and practical Simba k102 is a long-hole production drill rig for small to medium-drift
More informationBoomer T1. Single-boom face drilling rig for narrow drifts and tunnels with cross sections up to 23 m²
Boomer T1 Single-boom face drilling rig for narrow drifts and tunnels with cross sections up to 23 m² Prime performance packed into a small, versatile unit The Boomer T1 is an ideal rig for narrow vein
More informationBOOMER S. Single-boom face drilling rigs for small drifts and tunnels with cross sections up to 31 m 2
BOOMER S Single-boom face drilling rigs for small drifts and tunnels with cross sections up to 31 m 2 w GROUND-BREAKING PRODUCTIVE DRILLING THE BOOMER S1 IS A FACE DRILLING RIG FOR MINING AND TUNNELLING.
More informationBOOMER M-SERIES. Face drilling rig for tunneling and mining applications with a coverage area up to 65 m 2.
BOOMER M-SERIES Face drilling rig for tunneling and mining applications with a coverage area up to 65 m 2. RELOADED TO MEET YOUR CONDITIONS THE BOOMER M-SERIES FACE DRILLING RIGS HAVE BECOME A KEY PIECE
More informationBoomer M-series. Face drilling rig for tunneling and mining applications with a coverage area up to 65 m²
Boomer M-series Face drilling rig for tunneling and mining applications with a coverage area up to 65 m² 1 Reloaded to meet your conditions The Boomer M-series face drilling rigs have become a key piece
More informationEaser L. Mobile raiseboring machine for drifts and tunnels from 5.0 m x 5.0 m
Easer L Mobile raiseboring machine for drifts and tunnels from 5.0 m x 5.0 m Versatile Raiseboring rig Designed to drill opening holes in block cave, sub level caving and sub level stoping mines, this
More informationBOOMER E1/E2 SERIES. Hydraulic face drilling rigs for medium to large drifts and tunnels with cross sections up to 112 m²
BOOMER E1/E2 SERIES Hydraulic face drilling rigs for medium to large drifts and tunnels with cross sections up to 112 m² FOR POWER AND PRODUCTIVITY THE BOOMER E1 AND BOOMER E2 RIGS HAVE EXTENSIVE COVERAGE
More informationBoomer M2 Battery. Battery powered face drill rig with zero emissions for coverage areas up to 65 m 2
Boomer M2 Battery Battery powered face drill rig with zero emissions for coverage areas up to 65 m 2 Cutting costs and boosting productivity with smart solutions The Boomer M-series face drilling rigs
More informationScamec 2000 Breaker. Features. Technical data sheet
Pictured machine may include options and additional equipment. Features Scamec 2000 Breaker is a self propelled diesel driven unit for mechanized breaking in underground mining and tunnelling. Scamec consist
More informationBoltec S. Fully mechanized bolting rig developed for installation of rock bolts from 1.5 to 2.4 m in smaller drive dimensions
Boltec S Fully mechanized bolting rig developed for installation of rock bolts from 1.5 to 2.4 m in smaller drive dimensions 1 Making mining safe Boltec S is a fully mechanized rock bolting rig suitable
More informationBoomer L2. Hydraulically controlled face drilling rig with a coverage area up to 104 m²
Boomer L2 Hydraulically controlled face drilling rig with a coverage area up to 104 m² 1 Fast and efficient face drilling The Boomer L2 is a powerful hydraulically controlled face drilling rig for mining
More informationBoomer XL3 D face drilling rig
Boomer XL3 D face drilling rig Three-boom tunneling drill rig for large sized underground tunnels and cross sections, with maximum coverage area 178 m 2 1 A giant of high penetration Boomer XL3 D is a
More informationBOOMER E3/E4 SERIES. Hydraulic face drilling rigs for medium to large drifts and tunnels with cross sections up to 205 m²
BOOMER E3/E4 SERIES Hydraulic face drilling rigs for medium to large drifts and tunnels with cross sections up to 205 m² FOR POWER AND PRODUCTIVITY RIGS IN THE BOOMER E3 AND E4 SERIES HAVE EXTENSIVE COVERAGE
More information5200 ITH Specifications and Features
2003 Specifications and Features 5200 ITH The 5200 is a track mounted ITH drill designed to drill with In-The-Hole hammers powered with high air pressure. This drill is unitized with an on board reciprocating
More informationBOLTEC M. A fully mechanized rock bolting rig for bolt lengths from m heights up to 9.5 meters
BOLTEC M A fully mechanized rock bolting rig for bolt lengths from 1.5-3.5 m heights up to 9.5 meters BOLTEC M MAKING MINING SAFE A FULLY MECHANIZED ROCK BOLTING RIG FOR BOLT LENGTHS FROM 1.5-3.5 METERS.
More informationScamec 2000 L. Features. Technical data sheet
Pictured machine may include options and additional equipment. Features Scamec 2000 L is a diesel driven unit designed for mechanised scaling in underground mines and tunnels where tramming height is 2.4
More informationScamec 2000 M. Features. Technical data sheet
Pictured machine may include options and additional equipment. Features Scamec 2000 M is a diesel driven unit designed for mechanised scaling in underground mines and tunnels where tramming height is 2.4
More informationRMS. RMS18 Scaler SERIES -LP15 RMS SERIES SALES SPECIFICATIONS OPTIONS FEATURES & BENEFITS
RMS SERIES SALES SPECIFICATIONS RMS SERIES -LP15 RMS18 Scaler FEATURES & BENEFITS AT A GLANCE Weights & Dimensions: Operating Weight Overall Tramming Length Overall Width ~ 45,365lb (20,700kg) ~ 34 (10.3m)
More informationBoomer E1-DH. Diesel-hydraulic face drilling rig for medium to large mines and tunnels with cross sections up to 106 m 2
Boomer E1-DH Diesel-hydraulic face drilling rig for medium to large mines and tunnels with cross sections up to 106 m 2 1 For power and productivity The Boomer E1-DH rig has extensive coverage areas of
More informationBOOMER E3/E4 SERIES. Hydraulic face drilling rigs for medium to large drifts and tunnels with cross sections up to 205 m²
BOOMER E3/E4 SERIES Hydraulic face drilling rigs for medium to large drifts and tunnels with cross sections up to 205 m² FOR POWER AND PRODUCTIVITY RIGS IN THE BOOMER E3 AND E4 SERIES HAVE EXTENSIVE COVERAGE
More informationSemmco Alpha 20. Features. Technical data sheet
This image includes options and extra equipment. Features Alpha 20 is a robust shotcrete sprayer, diesel hydraulically driven with a large concrete pumping capacity, the main characteristics of this equipment
More informationBoltec E. Fully mechanized rock bolting rig for bolt lengths from meters, effective in roof heights up to 13 meters
Boltec E Fully mechanized rock bolting rig for bolt lengths from 2.4-6 meters, effective in roof heights up to 13 meters 1 Making mining safe Boltec E is a fully mechanized rock bolting rig suitable for
More informationBoomer E1/E2 series. Hydraulic face drill rigs for medium to large drifts and tunnels with cross sections up to 112 m²
Boomer E1/E2 series Hydraulic face drill rigs for medium to large drifts and tunnels with cross sections up to 112 m² 1 For power and productivity The Boomer E1 and Boomer E2 rigs have extensive coverage
More informationBoltec M. A fully mechanized rock bolting rig for bolt lengths from m and heights up to 9.5 meters
Boltec M A fully mechanized rock bolting rig for bolt lengths from 1.5-3.5 m and heights up to 9.5 meters 1 Making mining safe A fully mechanized rock bolting rig for bolt lengths from 1.5-3.5 meters.
More informationVPS SERIES. Vibratory Pick Scaler - LP15 AT A GLANCE. OPTIONS 12-8 (3.86 m) FEATURES & BENEFITS
VPS SERIES - LP15 Vibratory Pick Scaler 285 VP RIES VPS SE LP15 FEATURES & BENEFITS AT A GLANCE Weights & Dimensions: Operating Weight VPS16: 45,160 lb (20,527 kg) VPS25: 46,500 lb (21,136 kg) Overall
More informationMEYCO ME3. Concrete Spraying Mobile for medium sized tunnels
MEYCO ME3 Concrete Spraying Mobile for medium sized tunnels VERSATILE CONCRETE SPRAYING APPLICATION EXPERTISE UNIFIED FOR HIGH QUALITY, ECONOMICAL AND SAFE APPLICATION OF SPRAYED CONCRETE. MAIN BENEFITS
More informationSANDVIK LH208L LOW PROFILE LOADER
SANDVIK LH208L LOW PROFILE LOADER TECHNICAL SPECIFICATION Sandvik LH208L is a 7.7 tonnes capacity underground low-profile LHD designed to work in low profile room and pillar mining and extra low profile
More informationBoomer S2. Robust face drilling rig with a coverage area up to 56 m 2
Boomer S2 Robust face drilling rig with a coverage area up to 56 m 2 1 Robust performace in a small package The Boomer S2 is our smallest mining and tunneling rig with intelligent control, now tougher
More informationFace Drilling Jumbos. Product Overview
Product Overview Who we are: Since 1921, Komatsu has stood for unrivaled quality and reliability. Our enduring global success stems from the principles of our founder, Meitaro Takeuchi, who envisioned
More informationCharmec LC 605 D(V) Features. Technical data sheet
Pictured machine may include options and additional equipment. Features charger with diesel hydraulic drive is designed for face and production charging in underground mines and tunnels up to 65 m 2 cross
More informationFRD has a lot of missions on the world for the next generation.
Drill Jumbo catalogue Drill Jumbo catalogue FRD has a lot of missions on the world for the next generation. 1-5-3, Nihonbashi, Chuo-ku, Tokyo 103-0027, Japan Phone +81-3-3231-6982 Fax +81-3-3231-6994 ISO9001,
More informationSpraymec 8100 VC. Features. Technical data sheet
Equipment includes options and extra equipment. Features Spraymec 8100 VC is an electro-hydraulic self-propelled mobile concrete sprayer which optimizes concrete spraying in tunnel projects with variable
More informationSemmco Alpha 30. Features. Technical data sheet
Equipment includes options and extra equipment. Features Semmco Alpha 30 is a diesel hydraulic mobile concrete sprayer designed for tunnel profiles up to 7 m in height and 9 meters in width. The maximum
More informationSimba S7. Rugged rig with smart design and increased automation made for tight, tough conditions
Simba S7 Rugged rig with smart design and increased automation made for tight, tough conditions 1 Flexibility, versatility and reliability Maximize productivity in small spaces with the Simba S7. This
More informationSemmco Alpha 30. Features. Technical data sheet
Equipment includes options and extra equipment. Features is a diesel hydraulic mobile concrete sprayer designed for tunnel profiles up to 7 m in height and 9 meters in width. The maximum longitudinal spraying
More informationCharmec MC 905 DA short end AUSTRALIA
Technical specification CHARGING SYSTEM 2 ANFO vessels and work stand, 1 charging operator 500 liter stainless steel ANFO kettle Pressure max. 7 bar Extra air for charging Pneumatic hand and foot control
More informationSANDVIK LH202 NARROW VEIN LOADER
SANDVIK LH202 NARROW VEIN LOADER TECHNICAL SPECIFICATION Sandvik LH202 is a compact and lightweight Load Haul Dump (LHD) for narrow vein mining. Best payload to own weight ratio in its class. Sandvik LH202
More informationSandvik LH307 Technical Specification
Technical Specification APPLICATIONS is a 6,7 tonnes Load-Haul-Dump (LHD) developed specially for underground use for the most diverse application, including development work, mining and tunnelling construction.
More informationMEYCO ME5. Mobile concrete spraying for large sized tunnels
MEYCO ME5 Mobile concrete spraying for large sized tunnels DEPENDABLE CONCRETE SPRAYING ACCURATE ECONOMICAL CONCRETE SPRAYER. BETTER THAN EVER Productivity heightened with improved pumping efficiency Accuracy
More informationSandvik LH203 Technical Specification
2014-01-16 Technical Specification APPLICATIONS is a compact and lightweight Load Haul Dump (LHD) for narrow vein mining. Best payload to own weight ratio in its class. Capacities Tramming capacity 3 500
More informationSpraymec 8100 VC. Features. Technical data sheet AUSTRALIA
Equipment includes options and extra equipment. Features is an electro-hydraulic self-propelled mobile concrete sprayer which optimizes concrete spraying in tunnel projects with variable tunnel cross-sections.
More informationCharmec LC 605 D(V) Features. Technical data sheet AUSTRALIA
Pictured machine may include options and additional equipment. Features charger with diesel hydraulic drive is designed for face and production charging in underground mines and tunnels up to 65 m 2 cross
More informationEJC 430 TECHNICAL SPECIFICATION. Payload: 30 tons (27.3 tonnes) Dump box volume: 20.7 yd³ (15.3 m³) We are an ISO 9001 Registered Company EJC 430 1
EJC 430 1 EJC 430 TECHNICAL SPECIFICATION Payload: 30 tons (27.3 tonnes) Dump box volume:.7 yd³ (.3 m³) 02, EJC Loaders Division reserves the right to change this 2 EJC 430 General Arrangement 65 o 430
More informationFLSERIES - LP12. Fuel Lube Vehicle AT A GLANCE OPTIONS FEATURES & BENEFITS. High speed / high mobility underground fuel lubrication vehicle.
FLSERIES - LP12 Fuel Lube Vehicle AT A GLANCE Weights & Dimensions: Operating Weight Overall Tramming Length Overall Width 27,000 lb (12,273 kg) 27-2 (8.3 m) 7-0 (2.13 m) Tramming Height Carrier Articulation
More informationBoomer E3/E4 series. Hydraulic face drilling rigs for medium to large drifts and tunnels with cross sections up to 205 m²
Boomer E3/E4 series Hydraulic face drilling rigs for medium to large drifts and tunnels with cross sections up to 205 m² 1 For power and productivity Face drill rigs in the Boomer E3 and E4 series have
More informationEJC 65 UNIQUE ADAPTABILITY CAPACITY: 6500 LBS (2900 KG) TECHNICAL SPECIFICATION 1-3
1-3 EJC 65 TECHNICAL SPECIFICATION UNIQUE ADAPTABILITY CAPACITY: 6500 LBS (2900 KG) 1-4 EJC 65 Main Dimensions 65 EJC 65 1-5 SANDVIK TAMROCK EJC Loaders Division EJC 65 Specification Sheet January 1, 2000
More informationSTOPEMASTER SERIES HX Rock Drill and Blast Rig Technical Overview
STOPEMASTER SERIES HX Rock Drill and Blast Rig Technical Overview For more information on the Stopemaster scan with a QR code reader on your smart phone. PRODUCTIVITY THROUGH SAFE, RELIABLE AND TRUSTED
More informationCharmec MC 605 D(V) Features. Technical data sheet AUSTRALIA
Pictured machine may include options and additional equipment. Features Charmec MF 605 D charger with diesel hydraulic drive is designed for face and production charging in underground mines and tunnels
More informationSANDVIK LH204 UNDERGROUND LOADER
UNDERGROUND LOADER Sandvik LH204 is designed to give maximum tramming capacity in narrow mining and tunneling applications. The hydrostatic drive system delivers high tractive effort for maximum penetration
More informationPrecise and flexible production drilling
Simba E7-series Hydraulic long-hole production drill rig for medium to large size drifts, with excellent coverage area and hole range from 51 to 178 mm 1 Precise and flexible production drilling The drill
More informationCharmec MF 605 DA. Features. Technical data sheet
Pictured machine may include options and additional equipment. Features Charmec MC 605 ANFO charger with diesel hydraulic drive is designed for face and production charging in underground mines and tunnels
More informationSIMBA MAIN BENEFITS. FOPS and ROPS approved cab for a safe and comfortable operator environment
SIMBA E7-SERIES Hydraulic long hole production drill rig for medium to large size drifts, with excellent cover area and flexibility. Hole range from 51 up to 127 mm. SIMBA PRODUCTION DRILLING IN MEDIUM
More informationSANDVIK LH514E MASS MINING LOADERS
SANDVIK LH514E MASS MINING LOADERS TECHNICAL SPECIFICATION Sandvik LH514E is a high capacity electric Load-Haul- Dump (LHD) developed specially for underground use. It emits very low noise and no exhaust
More informationEJC EJC 522. Technical Specification. Payload: 20 tonnes (22 tons) Dump box volume (SAE): 10.2 m³ (13.4 yd³) ISO 9001:2000 FM 62442
EJC 522 1 EJC 522 Technical Specification Payload: tonnes (22 tons) Dump box volume (SAE):.2 m³ (13.4 yd³) 2 EJC 522 General Arrangement 65 83 96 in (2438) 90 in (2286) 179 in (4547) 13 358 in (9093) 174
More informationSIMBA M6. Hydraulic production drill rig for long-hole mining and medium-to-large holes ranging from 51 to 178 mm in diameter.
SIMBA M6 Hydraulic production drill rig for long-hole mining and medium-to-large holes ranging from 51 to 178 mm in diameter. SIMBA HIGH PRECISION SOLUTION THE STURDY SIMBA M6 IS A LONG-HOLE PRODUCTION
More informationA64 Cable Stringer Cable Hanger
Getman cable stringers are purpose-built mining vehicles designed to facilitate safe installation and recovery of electrical cable in underground mining operations. Cable stringers drive value by facilitating
More informationSIMBA M4. Hydraulic production drill rig for long-hole mining and medium-to-large holes ranging from 51 to 178 mm in diameter.
SIMBA M4 Hydraulic production drill rig for long-hole mining and medium-to-large holes ranging from 51 to 178 mm in diameter. SIMBA THE STURDY SIMBA M4 IS A LONG-HOLE PRODUCTION DRILL RIG FOR MEDIUM TO
More informationA64 Boom Boom & Basket Truck
Getman A64 Boom Trucks are designed to provide safe and reliable boom and basket trucks for performing a variety of tasks throughout underground operations. Getman Boom trucks are optimized to provide
More informationSandvik TH430 Technical Specification
Technical Specification APPLICATIONS The is a true 30 metric tonne articulated mine dump truck that will fit in a 4 x 4 m envelope. The TH430 is equipped with a standard, fully enclosed, vibration isolated,
More informationEJC 30SX 1 EJC 30SX. Technical Specification. Payload: 33 tons (30 tonnes) Dump box volume (SAE): 14.0 m³ (18.3 yd³) ISO 9001:2000 FM 62442
EJC SX 1 EJC SX Technical Specification Payload: 33 tons ( tonnes) Dump box volume (SAE): 14.0 m³ (18.3 yd³) 2 EJC SX General Arrangement 65 2 in (2591) 96 in (2438) 96 in (2438) 195 in (4953) 13 358 in
More informationTM15 - LP15. Mobile Rockbreaker AT A GLANCE OPTIONS FEATURES & BENEFITS
TM15 - LP15 Mobile Rockbreaker FEATURES & BENEFITS AT A GLANCE Weights & Dimensions: Operating Weight Overall Tramming Length Overall Width 45,100 lb (20,500 kg) 32-0 (9.7 m) 7-1 (2.16 m) Tramming Height
More information7-10 (2.39 m) TB830XCS: 16-6 (5.0 m) Standard Optional. Caterpillar C4.4 ACERT
TM12 - LP15 Mobile Rockbreaker FEATURES & BENEFITS High speed / high mobility underground rockbreaking. AT A GLANCE +/-45 vehicle articulation for tight turning radius Weights & Dimensions: Operating Weight
More informationSLSERIES - LP12. Scissorlift Vehicle AT A GLANCE OPTIONS FEATURES & BENEFITS. High speed / high mobility underground scissorlift vehicle.
SLSERIES - LP12 Scissorlift Vehicle AT A GLANCE Weights & Dimensions: Operating Weight Overall Tramming Length Overall Width 31,000 lbs (14,091 kg) 27-2 (8.29 m) 7-0 (2.13 m) Tramming Height Carrier Articulation
More informationSandvik TH320. General Arrangement
Technical Specification TH3-Revision 1 1/10 General Arrangement 65 96 in (2438) 179 in (4547) TH3 13 TH3 90 in (2286) 12 in (305) 54 in (1372) 358 in (9093) 174 in (44) 83 in (2108) 13 in (330) 87 in (2210)
More informationGood To Drill Happy Drilling Forever With PRD RIGS
www.prdrigs.com Good To Drill Happy Drilling Forever With PRD RIGS paranthaman Exporters About Us :- PRD Rigs Good To Drill Water Well Drilling Rigs PRD Max Drill 3000 6 ½ to 20 dia upto 1000 Mtrs Pull
More informationALL TERRAIN HYDRAULIC CRANE
ALL TERRAIN HYDRAULIC CRANE Dimensions R 47'7" (14500) Ra 39'8" (12100) R 45'7" (13900) 25'7" (7800) Ra 38'6" (11725) 16'1" (4892) 9'6" (2908) R 33'10" (10300) Ra 29'3" (8975) R 13'10" (4220) 10' (3070)
More informationRT 175. Rough Terrain Crane. simple, available and cost effective. View thousands of Crane Specifications on FreeCraneSpecs.
RT 175 Rough Terrain Crane FEATURES 75 tons (68 mt) maximum lifting capacity 126 ft. (38.4 m) maximum boom length 193 ft. (58.8 m) maximum tip height Four-section full power boom with single lever control
More informationScooptram ST2D. Underground diesel loader with 3.6 tonne load capacity
Scooptram ST2D Underground diesel loader with 3.6 tonne load capacity 1 Hardened loader For small and narrow vein mines A parallel boom design matched to an aggressive bucket configuration provides efficient
More informationALL TERRAIN HYDRAULIC CRANE
913.321.0127 ALL TERRAIN HYDRAULIC CRANE Dimensions 26' 7" (8 100) R 37' 2" (11 325) Ra 34' (10 350) R 35' 4" (10 775) Ra 32' 5" (9 875) 18' 3" (5 570) 8' 4" (2 530) R 26' 11" (8 200) Ra 24' (7 325) 42'
More informationMAIN BENEFITS. Reverse camera to enhance good visibility for the operator when transporting the drill rig
SIMBA E6-W(WL) Hydraulic long hole production drill rigs for medium to large size mining, powerfull ITH- water hammer for long straight holes with high demand for hole quality. Hole range from 89 up to
More information16'1" (4892) R 42'8" (13000) Ra 35'1" (10700) R 23'2" (7050) 15'1" (4609) 47' 6" (14468) 42' (12800) 6" (150) 5'5" (1650) 4'1" (1250) 6'7" (2000)
Dimensions R 47'7" (14500) Ra 39'8" (12100) R 45'7" (13900) 25'7" (7800) Ra 38'6" (11725) 16'1" (4892) 9'6" (2908) R 33'10" (10300) Ra 29'3" (8975) R 13'10" (4220) 10' (3070) 16'9" (5100) 9' (2750) 13'11"
More informationSimba M4. Hydraulic production drill rig for long-hole mining and medium-to-large holes ranging from 51 to 178 mm in diameter
Simba M4 Hydraulic production drill rig for long-hole mining and medium-to-large holes ranging from 51 to 178 mm in diameter 1 Compact and powerful long-hole drilling solution The sturdy Simba M4 is a
More informationTFC 45 / TFC 45 R / TFC 45 RX / TFC 45 RS / TFC 45 L / TFC 45 LS / TFC 45 LX / TFC 45 LSX
TFC 45 SUPER STACKER TFC 45 / TFC 45 R / TFC 45 RX / TFC 45 RS / TFC 45 L / TFC 45 LS / TFC 45 LX / TFC 45 LSX SUPER STACKER h/hc TFC 45 TFC 45 R TFC 45 RX TFC 45 RS TFC 45 L TFC 45 LS TFC 45 LX TFC LSX
More informationAll Terrain crane 240 tons
All Terrain crane 240 tons Grove gmk5240 BOOM LENGTHS: 44 to 197 ft JIB LENGTHS: 43 to 125 ft JIB OFFSETS: 5-20 - 40 NOTES: ALL TERRAIN HYDRAULIC CRANE Dimensions R 49'10" (15200) Ra 42'4" (120) R 47'9"
More informationHigh precision solution
Simba M6 Hydraulic production drill rig with I-beam mounted drilling unit for long-hole mining and medium-to-large holes ranging from 51 to 178 mm in diameter 1 High precision solution The sturdy Simba
More informationSTOPEMASTER SERIES Rock Drill and Blast Rig Technical Overview
STOPEMASTER SERIES Rock Drill and Blast Rig Technical Overview Copyright 2011. All rights reserved. Copyright 2011. All rights reserved. For more information on the Stopemaster scan with a QR code reader
More informationSmartROC D50 and D55 DTH surface drill rig for quarrying and mining
SmartROC D50 and D55 DTH surface drill rig for quarrying and mining SmartROC D50 hole diameter: 90 130 mm (3.5 5.1") SmartROC D55 hole diameter: 90 152 mm (3.5 6") Drill rigs with intelligence and power
More informationPowerROC T25 E Surface drill rig for drill site construction and civil engineering, and small aggregate and limestone quarrying.
PowerROC T25 E Surface drill rig for drill site construction and civil engineering, and small aggregate and limestone quarrying. Hole diameter: 51 89 mm( (2" 3½") 1 Powerful and effective If you re looking
More informationSpraymec MF 050 VC. Features. Technical data sheet AUSTRALIA
Pictured machine may include options and additional equipment. Features Spraymec MF 050 VC is an electrohydraulic self-propelled mobile concrete sprayer for modern mining operations in small and medium
More informationSpraymec SF 050 D. Features. Technical data sheet
Pictured machine may include options and additional equipment. Features Spraymec SF 050 D is a diesel-hydraulic self-propelled mobile concrete sprayer for modern mining operations in small and medium size
More informationSCOOPTRAM EST1030. Electric underground loader with 10-tonne capacity
SCOOPTRAM EST1030 Electric underground loader with 10-tonne capacity ELECTRICALLY POWERED TO SAVE ENERGY, TIME AND MONEY THE SCOOPTRAM EST1030 IS A FAST, ELECTRICALLY POWERED LOADER WITH A 10 -TONNE CAPACITY
More informationA64 Cable Stringer-S Cable Hanger
Getman cable stringers are purpose-built mining vehicles designed to facilitate safe installation and recovery of electrical cable in underground mining operations. Cable stringers drive value by facilitating
More informationALL TERRAIN HYDRAULIC CRANE
ALL TERRAIN HYDRAULIC CRANE Dimensions 17'6" (5340) 28'6" (8700) 11' (3360) R 48'11" (14920) Ra 43'10" (13360) R 38' (11580) Ra 34'9" (10590) R 37'6" (11440) Ra 35' (10680) R 16'5" (4995) R 14' (4270)
More informationFlexiROC T15 R Surface drill rig for quarrying and construction
FlexiROC R Surface drill rig for quarrying and construction Hole diameter: 27 51 mm (1" 2") Productivity in a small package When small holes mean big business, the FlexiROC R drill rig is your best friend.
More informationECM-720 CM-760D CM-780D
Setting The Pace Hydraulic Crawler Drills ECM-720 CM-760D CM-780D HOLE QUALITY PENETRATION RATE ACCESSORY LIFE COLLAR SOFT ROCK Strata-Sense Drill Automatics Optimization of drilling speed, hole straightness
More informationA64 Service Fuel Service Truck
Getman service trucks are designed to help perform key maintenance and repair functions throughout an underground mining operation, minimizing the need to return other production and production support
More informationEJC 430 READY FOR USE FROM THE TRIDENT GROUP TAMROCK EJC 430 WILLIAMS OPERATING SPECIFICATION UNDERGROUND HAUL TRUCK
EJC READY FOR USE FROM THE TRIDENT GROUP TAMROCK EJC WILLIAMS OPERATING SPECIFICATION UNDERGROUND HAUL TRUCK POWERED WITH A DETROIT SERIES ENGINE MILITARY SPECIFICATION WIRING WILLIAMS OPERATING SPECIFICATION
More informationdata GMK7550 product guide contents features 550 ton (450 mton) capacity All Terrain Crane 197 ft (60 m) 5 section full power boom
data features 5 ton (4 mton) capacity 197 ft ( m) 5 section full power boom Patented TWIN-LOCKTM boom pinning system 82 ft - ft (25 m - 73 m) lattice luffing jib 39 ft - ft (12 m - m) fixed lattice jib
More informationSST Shotcrete Shotcrete Sprayer
Getman shotcrete sprayers are designed to quickly and efficiently perform all shotcrete operations required in underground mining, offering an unparalleled boom coverage area that enables extended spraying
More informationPersonnel Carrier Vehicle
PCSERIES - LP15 Personnel Carrier Vehicle FEATURES & BENEFITS AT A GLANCE Weights & Dimensions: Operating Weight Overall Tramming Length Overall Width 32,000 lbs (14,545 kg) 31-8 (9.7m) 7-3 (2.21m) Tramming
More informationSMARTROC D60. Surface drill rig for aggregate and limestone quarries, surface mining and construction. Hole diameter mm (4 5/16 7 )
SMARTROC D60 Surface drill rig for aggregate and limestone quarries, surface mining and construction Hole diameter 110 178 mm (4 5/16 7 ) SMART IS THE NEW ROBUST A SMART DRILLING SOLUTION, BUILT ON A ROBUST
More informationA64 Service Lube-S Service Truck
Getman service trucks are designed to help perform key maintenance and repair functions throughout an underground mining operation, minimizing the need to return other production and production support
More informationPCSERIES - LP12. Personnel Carrier Vehicle AT A GLANCE OPTIONS FEATURES & BENEFITS. High speed / high mobility underground personnel carrier vehicle.
PCSERIES - LP12 Personnel Carrier Vehicle AT A GLANCE FEATURES & BENEFITS Weights & Dimensions: Operating Weight Overall Tramming Length Overall Width 26,000 lbs (11,818 kg) 29-8 (9.05 m) 7-3 (2.2 m) Tramming
More informationCharmec MF 605 DA. Features. Technical data sheet USA & Canada
Pictured machine may include options and additional equipment. Features Charmec MC 605 ANFO charger with diesel hydraulic drive is designed for face and production charging in underground mines and tunnels
More informationA64 Water Sprayer Service Truck
Getman water sprayers provide an efficient and reliable means of roadway dust suppression. Getman s A64 Water Sprayer utilizes a high volume, 7,570 L (2,000 gal) water tank equipped with ground and/or
More informationA64 Crane-S Materials Transporter
A64 Crane-S Getman materials transport vehicles are versatile underground carriers designed to move materials throughout a mining operation reliably and efficiently, ensuring loads are delivered where
More information