ADVANCED THERMAL INTERFACE MATERIALS AND SOLUTIONS FOR E-MOBILITY
|
|
- Derick Wheeler
- 5 years ago
- Views:
Transcription
1 ADVANCED THERMAL INTERFACE MATERIALS AND SOLUTIONS FOR E-MOBILITY
2 ADVANCED THERMAL INTERFACE SOLUTIONS FOR E-MOBILITY OUR PRODUCTS: DISPENSABLE TWO PART GAP FILLERS TDG-L-SI-2C with 2.0 W/mK TDG-T-SI-2C with 3.0 W/mK TDG-U-SI-2C with 3.6 W/mK TDG-W-SI-2C with 4.5 W/mK Ultra-Conforming at almost ZERO Pressure Maximum Tolerance Compensation from almost ZERO to some mm Excellent, Mechanical and Chemical Stability Minimized Siloxane Volatility for Silicone Sensitive Applications STRIVING FOR OPTIMIZED THERMAL SYSTEMS Innovative heat pipe solutions for heat transfer and heat spreading to meet a wide range of application challenges in Electric and Hybrid Vehicles. HALA Contec GmbH & Co. KG / Hans-Böckler-Straße 15 / D Kirchheim u. T. / Fon / Fax / contec@hala-tec.de /
3 SOLUTIONS FOR E-MOBILITY SOLUTIONS FOR E-MOBILITY Excellent Performance High Reliability under Harsh Conditions Lasting Mechanic,, Chemical Stability Stringent Cost-Efficiency Automated Assembly and Dispense Extending Life Time Reducing Power Consumption EXTENDED RANGE OF THERMALLY CONDUCTIVE INTERFACE MATERIALS Gap filler pads Dispensable 2 part gap fillers Silicone caps PSA tapes Foils and highly dielectric films 1 part silicone adhesives 2 part silicone encapsulants Phase change films and compounds
4 APPLICATION THERMAL INTERFACE MATERIALS AND SOLUTIONS for Electric or Hybrid Vehicles Battery Charger 1 Type Product Data 0.2 mm 150 PSI [ C-inch²/W] Battery Packs 2 Silicone Foils TFO-X-SI White TFO-K-SI Grey Highly Silicone Foils TFO-Q-SI Pink TFO-O-SI Grey TFO-J-SI Brown Silicone Caps TCP-J-PC Pink Battery Management Systems (BMS) 3 Silicone Gap Filler Pads TGF-WSS-SI Grey TGF-TSS-SI Purple TGF-M-SI Blue TGF-JXS-SI-A1 Blue / Grey TGF-EXS-SI-GF Brown / Grey [Shore 00] Power Converter / Inverter 4 Dispensable 2 Part Silicone Gap Fillers TDG-W-SI-2C Pink / White TDG-U-SI-2C Blue / White TDG-T-SI-2C Blue / White TDG-L-SI-2C Green / White PSA Tapes TAT-J-PE White TAT-H-CO White [Shore 00] Resistance [ C-inch²/W] Motor / Generator 5 PTC Heater 6 1 Part Silicone Adhesives 2 Part Silicone Encapsulant TAD-P-SI-1C Grey TAD-O-SI-1C Grey TAD-I-SI-1C White TAD-G-SI-1C Grey [Shore A] TCR-I-SI-2C Grey / Grey (Shore 00) TCR-D-SI-2C Beige / Black (Shore A) LED Systems 7 Phase Change Film TPC-W-PC Grey TPC-T-AL-CB Black PSI [ C-inch²/W] Heat Pipe Assembly Function Heat Transfer Heat Spreading Heat Pipe Material > 5000 W/mK Copper HALA Contec GmbH & Co. KG / Hans-Böckler-Straße 15 / D Kirchheim u. T. / Fon / Fax / contec@hala-tec.de /
5 Where to be used in an Electric or Hybrid Vehicle 0.2 mm [kv (AC)] Glass Fibre Mesh Reinforcement Optional 1-side Adhesive 1 Battery Charger 2 Battery Packs 3 Battery Management Systems (BMS) 4 Power Converter / Inverter 5 Motor / Generator 6 PTC Heater 7 LED Systems 3.0 X X XX XX XX XX XX 2.0 X X XX XX X X X 4.8 X X X XX 5.5 X X X X XX XX X 5.5 X X XX X X X X 10 X X Strength [kv/mm] Glass Fibre Laminate Reinforcement Optional 1-side non tacky 10 X XX XX 15 XX X 10 X X XX 10 X XX X 6.0 X XX Strength [kv/mm] Density [g/cm³] Viscosity Brookfield 10 rpm [Pas] X X X X X XX XX XX XX XX XX XX Breakdown [kv (AC)] Peel Al [N/cm] Thickness [mm] XX X Curing Density [g/cm³] Viscosity Brookfield [Pas] Condensational X X X XX Additional XX XX XX Condensational X X X X Additional XX XX XX Curing Density [g/cm³] Viscosity Brookfield mixed [Pas] Additional X Additional XX Phase Change Temperature Carrier Thickness [mm] , 0.2, 0.3 X X XX X 50 Aluminum 0.076, XX X XX XX Temperature Range Filler Assembly / Release 9 / 2017 All technical data and information are without warranty and believed to be reliable and accurate. Since the products are not provided to conform with mutually agreed specifications and their use and processing are unknown we cannot guarantee results, freedom from patent infringement, or their suitability for any application. Product testing by the applicant is recommended. We reserve the right of changes. 0 to 200 C Deionidised water Aluminum / Copper XX XX XX X XX HALA Contec GmbH & Co. KG / Hans-Böckler-Straße 15 / D Kirchheim u. T. / Fon / Fax / contec@hala-tec.de /
6 HALA CONTEC GMBH & CO. KG Hans-Böckler-Straße 15 D Kirchheim unter Teck Phone Fax Siemensstraße 5 D Ottobrunn Phone Fax contec@hala-tec.de
Fujipoly New Product Technical Information
Updated: May 3 th Fujipoly New Product Technical Information NEW PRODUCTS : SARCON GR-Pm, XR-Pe Highly Thermal Conductive and Non-Flammable Silicone Putty Sheets 1. Features: Sarcon GR-Pm and XR-Pe are
More informationCREATING TOMORROW S SOLUTIONS MOBILITY. e-novation FOR POWER CONVERSION POWERED BY SILICONES
CREATING TOMORROW S SOLUTIONS MOBILITY e-novation FOR POWER CONVERSION POWERED BY SILICONES THE BRAIN OF e-mobility Highly-efficient power conversion is a vital process for e-mobility. The direct current
More informationPower Supplies Advanced Materials for Higher Performance. Tech Taipei 2017 Sep 21, 2017
Power Supplies Advanced Materials for Higher Performance Tech Taipei 2017 Sep 21, 2017 Agenda 1. Henkel Company Introduction 2. Power Technology Trend 3. Application & Solution Overview - Transistors to
More informationFujipoly New Product Technical Information
Fujipoly ew Product Technical Information EW PRODUCT : SARCO GR-SL Thermally Conductive and on-flammable Silicone Gel Sheets 1. Features: Sarcon GR-SL is the lowest modulus type thermal gap filler material.
More informationFujipoly New Product Technical Information
Fujipoly ew Product Technical Information 1. Features: Sarcon GR-SL is the lowest modulus type thermal gap filler material. It preserves thermal performance of the original Sarcon GR-L material, 2.7 Watt/m-K
More informationAdvanced Materials. Raising insulation performance in car electronics
Raising insulation performance in car electronics Quarter 2, 2013 Table of contents Raising performance Ignition coils Reliability and protection for electronic devices Improved endurance for ignition
More informationHEATSINKS & MOUNTINGS
HEATSINKS & MOUNTINGS A range of economical, commercial grade sillicone rubber thermal interface materials providing good electrical isolation, reinforced with glass fibre and flame retardant to UL94V-0.
More informationTHE ESSENTIAL GUIDE TO THERMAL MANAGEMENT MATERIALS:
AUGUST 2016 WHITE PAPER THE ESSENTIAL GUIDE TO THERMAL MANAGEMENT MATERIALS: Heat Transfer is Vital for Creating Superior Products By: Modus TM Technical Team Modus Advanced, Inc. 2016 www.modusadvanced.com
More informationFlexible Heaters. Silicone Rubber Heaters
Rugged, yet thin, lightweight and flexible the use of Watlow silicone rubber heaters is limited only by the imagination. With these heaters, heat can be put where it is needed. In the application process
More informationINDUSTRIAL TAPE PRODUCT GUIDE
INDUSTRIAL TAPE PRODUCT GUIDE POLYESTER FILM TAPES Ideal Tape s complete line of pressure-sensitive polyester film tapes are backed by more than 100 years of coating experience. These products are widely
More informationThermally Conductive Interface Materials for Cooling Electronic Assemblies. Sil-Pad
Thermally Conductive Interface Materials for Cooling Electronic Assemblies Sil-Pad S E L E C T I O N G U I D E Table of Contents Introduction 1 Thermal Properties & Testing 4 Interface Material Selection
More informationDELO -PUR 9692 Multi-purpose 2c polyurethane, cures at room temperature, high-viscous, filled
DELO -PUR 9692 Multi-purpose 2c polyurethane, cures at room temperature, high-viscous, filled Base - polyurethane - two-component Use - for the bonding of metal, plastic and sometimes even elastomers -
More informationStandard G50 90 degree Table with cable to upper machine crosshead and G227 upper grips
G50 90 Degree Peel Test Fixtures G50 test fixtures are ideal to test inflexible adherends for which a 180 peel test is not suitable because of the cracking, breaking or delamination of the adherend. The
More informationInstallation device. HelaTape. Electrical tapes for sealing, insulation and bundling of cable and conduits.
Electrical tapes for sealing, insulation and bundling of cable and conduits. HellermannTyton offers a wide range of PVC and rubber tapes for sealing, insulation and bundling of cable and conduits. PVC-
More informationInstallation Devices 4
Installation Devices 4 4.1 Tapes HelaTape Flex - Vinyl Electrical Tapes HelaTape Wrap - Vinyl Tapes HelaTape Shield - Conductive Tapes HelaTape Flex 15 - All Purpose Vinyl Insulating Tape HelaTape Flex
More informationApalis Heatsink. Datasheet
Apalis Heatsink Datasheet Revision History Date Doc. Rev. Heatsink Version Changes 07-Nov-2014 Rev. 1.0 V1.0A Initial release 13-Nov-2013 Rev 1.1 V1.0A Section 3, Compatibility: minor updates Section 2,
More informationSOFT-SHIELD 5000 Series Conductive Jacket over Foam EMI Gaskets
Seals Conductive elastomers Knitted wire mesh Conductive coatings, sealants, adhesives Cable shielding products EMI/ESD shielding laminates Shielded vents and windows Commercial and military EMI testing
More informationDELO-DUOPOX AD895 Multi-purpose 2c epoxy resin, cures at room temperature, medium-viscous, filled
DELO-DUOPOX AD895 Multi-purpose 2c epoxy resin, cures at room temperature, medium-viscous, filled Base - epoxy resin - two-component Use - high-strength construction adhesive - multi-purpose - the cured
More informationSECTION 8: STATOR WINDING SENSORS
SECTION 8: STATOR WINDING SENSORS Install between stator windings for continuous protection of motors and generators Increased safety sensors for use in hazardous areas Single and dual elements offer high
More informationSurface Mount Terminal Blocks. 120-M-221-SMD 5.00 mm (0.197 in) Spacing poles PICTURES TECHNICAL INFORMATION. page 1/5
page 1/5 Surface Mount Terminal Blocks 120-M-221-SMD 5.00 mm (0.197 in) Spacing - 2-24 poles PICTURES 120-M-221-SMD 120-M-221-SMD & 120-D-111 TECHNICAL INFORMATION Description US Patent # 7,207,811 B2
More informationAbout Us. even in allocation times.
History The company SIEGERT was founded in 1945 by Dipl.-Ing. Ludwig Siegert. During the 50ies the enterprise focused on the manufacturing of film resistors. 1965 was the start of production of miniaturized
More informationPressure sensor for liquid and gaseous media QBE620-P...
1 904 Pressure sensor for liquid and gaseous media QBE620-P... Pressure sensor for the measurement of positive pressure in HVAC applications. Piezo-resistive system of measurement DC 0...10 V output signal
More informationThe strain sensor is available with integrated electronic evaluator.
Strain Sensor DA68 Description The strain sensor DA68 is suitable for high-resolution detection of forces and deformation of structural works such as bridges, silo legs, offshore wind farms, railway lines,
More informationDELO-DUOPOX AD897 Multi-purpose 2c epoxy resin, cures at room temperature, high-viscous, filled
DELO-DUOPOX AD897 Multi-purpose 2c epoxy resin, cures at room temperature, high-viscous, filled Base - epoxy resin - two-component Use - for the trowelling of welded seams - pasty and run-resistant but
More informationStandard G50 90 degree Table with cable to upper machine crosshead and G227 upper grips. G Width 130 mm (5.1 )
G50 Peel Test Fixture 90 Degrees with optional angle adjustment laminated surface coatings films packaging and rigid backings The G50 test fixture is ideal to test inflexible adherends for which a 180
More information3M Cold Shrink 3-Conductor Inline Splice Kits QS-III 5786A- MT, 5787A-MT and 5788A-MT 25/28 kv for use with Armored and Non- Armored 3/C Cable
3M Cold Shrink 3-Conductor Inline Splice Kits QS-III 5786A- MT, 5787A-MT and 5788A-MT 25/28 kv for use with Armored and Non- Armored 3/C Cable Data Sheet September 2010 Description 3M Cold Shrink 3-Conductor
More informationNew products Ex Equipment 2015
New products Ex Equipment 2015 ROSE Systemtechnik GmbH ROSE Systemtechnik GmbH was founded in Porta Westfalica, Germany, in 199 and is today one of the world s leading and innovative providers of industrial
More informationU < 1000 V I 0 A I > 0 A. Current-insulating SLF rolling bearings. Electrical insulation between housing and shaft prevents this damage.
prevent damage by current passage Electrical insulation between housing and shaft prevents this damage. Electric voltage which is internally generated between the motor and the stator, especially in electric
More informationHigh Voltage Copper, Smooth Aluminum Shield/Sheath
High Voltage Copper, Smooth Aluminum Shield/Sheath XLPE Insulation, HDPE Jacket, 69 kv - 138 kv Features True triple vertical extrusion system for optimum insulation concentricity, and excellent electric
More information3M XYZ / Isotropic Electrically Conductive Adhesive Transfer Tape 9709S / 9709 SL
Technical Data October, 2009 3M XYZ / Isotropic Electrically Conductive Adhesive Transfer Tape 9709S / 9709 SL Product Description 3M Electrically Conductive Adhesive Transfer Tape 9709S is a pressure
More informationMATERIALS FOR POWER STORAGE SYSTEMS ELECTRIC AND HYBRID VEHICLE SOLUTIONS
MATERIALS FOR POWER STORAGE SYSTEMS ELECTRIC AND HYBRID VEHICLE SOLUTIONS CONTENTS Introduction...2 Multiple Levels of Battery Solutions Battery Cells... 3 Battery Modules...4 Battery Packs...4 Materials
More informationToppTube PA11 (Polyamide) page 4. ToppTube PA12 (Polyamide) page 5. ToppTube PA12HIPHL (Polyamide) page 6. ToppTube PUR 98A (Polyurethane) page 7
ToppTube PA11 (Polyamide) page 4 ToppTube PA12 (Polyamide) page 5 ToppTube PA12HIPHL (Polyamide) page 6 ToppTube PUR 98A (Polyurethane) page 7 ToppTube PE-LD (Polyethylene) page 8 ToppTube PE-LLD (Polyethylene)
More informationCooling from Down Under Thermally Conductive Underfill
Cooling from Down Under Thermally Conductive Underfill 7 th European Advanced Technology Workshop on Micropackaging and Thermal Management Paul W. Hough, Larry Wang 1, 2 February 2012 Presentation Outline
More informationFoxtronic GmbH EMI Products
Foxtronic GmbH EMI Products Contents Conductive Fabrics Conductive Tapes Shield foam Gaskets Conductive Cushions Electromagnetic Wave Absorber Conductive Elastomers Isobest Conductive Fabrics Property
More informationJet Dispensing Underfills for Stacked Die Applications
Jet Dispensing Underfills for Stacked Die Applications Steven J. Adamson Semiconductor Packaging and Assembly Product Manager Asymtek Sadamson@asymtek.com Abstract It is not uncommon to see three to five
More informationProduct catalog Termika Sp. z o.o.
PRODUCT CATALOG Termika Sp. z o. o., ul. Narwicka 8, 80-557 Gdańsk, tel. +48 58 340 25 50 fax. +48 58 340 25 52 www.termika.eu e-mail: Termika@Termika.eu Version of 25.07.2017 Product catalog Termika Sp.
More informationAssembly Solutions for Battery Modules
Assembly Solutions for Battery Modules The Future of Battery Industry In recent years, the battery industry has changed dramatically and continues to see growth at a rapid pace. Trends such as hybrid and
More informationEnhanced Breakdown Voltage for All-SiC Modules
Enhanced Breakdown Voltage for All-SiC Modules HINATA, Yuichiro * TANIGUCHI, Katsumi * HORI, Motohito * A B S T R A C T In recent years, SiC devices have been widespread mainly in fields that require a
More informationMetal Thermal Materials Types Applications Testing
Metal Thermal Materials Types Applications Testing R.N. Jarrett, C.K. Merritt, J. P. Ross Indium Corporation MEPTEC 2008 Metal TIMs Reflowed NOT Reflowed Physical Types Solder Lead or Lead Free High Temp
More informationSurface Mount Terminal Blocks. 971-SLR-SMD mm (0.197 in) Spacing poles PICTURES TECHNICAL INFORMATION. page 1/5 971-SLR-SMD-1.
page 1/5 Surface Mount Terminal Blocks 971-SLR-SMD-1.1 5.00 mm (0.197 in) Spacing - 2-12 poles PICTURES 971-SLR-SMD-1.1 TECHNICAL INFORMATION Description US Patent # 6.224.399 B1 Canadian Patent # 2,307,922
More informationSpecialty Carbon Blacks Technical Data Europe
Specialty Carbon Blacks Technical Data Europe Focused. Innovative. Responsive. Analytical Test Methods Test Method ISO DIN ASTM Method for Determining the Surface Area International Organization for Standardization
More informationLow TCR, 1mW Dual Rejustor Micro-Resistor MBD-472-AL
Low TCR, 1mW Dual Rejustor Micro-Resistor MBD-472-AL The Rejustor is a precision, electrically-adjustable resistor from Microbridge. The Rejustor can be adjusted to a precision of 0.1%, or better. The
More informationPSI Anti-Corrosion Tape
General information Technical specifications Requirement evaluation Application instructions Certificates PSI Anti-Corrosion Tape 8 Pipeline Accessories 85 The Systems PSI anti-corrosion tapes have been
More informationOEM APPROVED AND USED
OEM APPROVED AND USED Pro Form's Pliogrip Truck Line epoxy and urethane adhesives are part of a complete system designed for the most demanding bonding applications in the truck refinish industry. www.proformproducts.com
More informationSchüco SkyLine S 65. Glazing beads and cover caps. Glazing beads. Cover caps. Glazing, gaskets and. Art. No. pol. total. Art. No. pol.
Glazing beads and cover caps Glazing beads Circumf. (mm) pol. total 336 410 57 149 Circumf. (mm) pol. total 336 420 106 208 Circumf. (mm) Cover caps pol. total 336 430 79 167 Circumf. (mm) pol. total 336
More informationseries S01 (usually CLOSED)
BIMETALLIC THERMAL PROTECTORS series S01 (usually CLOSED) voltage: 250 V AC 50/60 Hz n interventions: 2,5 A. (10000 cicli ) 6,3 A. (3000 cicli ) Homologations: UL/CSA/VDE/BEAB/SEMKO opening C ± 5% Cable
More informationSelection Guide. Thermal Management For LED Applications
Selection Guide Thermal Management For LED Applications Thermal Solutions For Long-Term Reliability Of Power LEDs Henkel s BERGQUIST brand Thermal Solutions Ensure Color Consistency And Maximum Lifecycles
More informationHigh Voltage Aluminum, Smooth Aluminum Shield/Sheath
High Voltage Aluminum, Smooth Aluminum Shield/Sheath XLPE Insulation, HDPE Jacket, 69 kv - 138 kv Features True triple vertical extrusion system for optimum insulation concentricity, and excellent electric
More informationIEC Separable Connectors 36 kv and 42 kv, 630A and 1250A Front T-Body / Coupling (Rear) T-Body Connector
www.chardongroup.com IEC Separable Connectors 36 kv and 42 kv, 630A and 1250A Front T-Body / Coupling (Rear) T-Body Connector Application Chardon Front T-Body / Coupling (Rear) T-Body connectors are fully
More information5000 Series Conductive Jacket over Foam Low Closure Force EMI Gaskets
Conductive elastomers Knitted wire mesh Low closure force, foam core EMI gaskets Conductive coatings, sealants, adhesives Cable shielding products EMI/ESD shielding laminates Shielded vents and windows
More informationInsulating Systems for Traction Motors
Insulating Systems for Traction Motors 2 Traction Motors We Enable Energy As one of the oldest industrial companies in Switzerland, founded in 1803, we focus on products and systems for power generation,
More informationPLED Ultra Low Holding Current Series
RoHS Description Agency Approvals This PLED ultra-low holding current series exhibits a low holding current parameter that makes it compatible with LED lighting strings. The series provide a switching
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS FOR LUGA SHOP PCB HOLDERS PCB HOLDERS FOR LUGA SHOP MODULES For simple and secure fixation and electrical connection of LUGA PCBs With separate holders a simple and secure fixation
More informationTechnical data. Material e-reinforced polyester in grey or black. Seal Neoprene (CR) round cord (siliconized)
BERNSTEIN Series CP and CPS polyester enclosures are produced from highgrade e-reinforced polyester. Thanks to their reduced surface resistance (Ro < 109 Ohm), the black polyester enclosures meet the requirements
More informationINSTALLATION INSTRUCTIONS Accessory Application Publications No. All 40290 BODY SIDE 2009 RIDGELINE Issue Date AUG 2008 PARTS LIST INSTALLATION NOTE: Be careful not to damage the body paint finish. Left
More informationSeamless solutions across the entire value chain of electric drive manufacturing
Press Release July 19, 2018 Seamless solutions across the entire value chain of electric drive manufacturing Henkel drives the future of e-mobility Düsseldorf, Germany Building on years of experience and
More information3M Cold Shrink QS-III Inline Splice Kits 15 kv 5513A, 5514A, 5515A and 5516A
3M Cold Shrink QS-III Inline Splice Kits 15 kv Data Sheet June 2014! CAUTION Working around energized high-voltage systems may cause serious injury or death. Installation should be performed by personnel
More informationSurface Mount Terminal Blocks. 930-D-SMD (-DS) 3.50 mm (0.138 in) Spacing poles PICTURES TECHNICAL INFORMATION. page 1/5 930-D-SMD-DS
page 1/5 Surface Mount Terminal Blocks 930-D-SMD (-DS) 3.50 mm (0.138 in) Spacing - 2-12 poles PICTURES 930-D-SMD-DS TECHNICAL INFORMATION Description The floating terminal contacts ensure total co-planar
More informationHigh Voltage Joints and Terminations up to 72,5 kv 145 kv
High Voltage Joints and Terminations up to 72,5 kv 145 kv 3M Cold Shrink Termination Kits QT-III and Joint Kits are designed to provide high reliability and save you time and money. They install quickly
More informationCREATING TOMORROW S SOLUTIONS MOBILITY. e-novation FOR CABLES AND CONNECTORS POWERED BY SILICONES
CREATING TOMORROW S SOLUTIONS MOBILITY e-novation FOR CABLES AND CONNECTORS POWERED BY SILICONES SILICONE CABLES AND CONNECTORS THE POWER HIGHWAY High-performance, silicone cables are required to be the
More informationTechnical Data Europe. Focused. I nnovative. R esponsive.
Carbon Black Pigments Technical Data Europe Focused. I nnovative. R esponsive. Analytical Test Methods Test Method ISO DIN ASTM Method for Determining the Surface Area International Organization for Standardization
More informationFlexible insulation to prevent condensation and energy losses
Flexible insulation to prevent condensation and energy losses Powered by TCPDF (www.tcpdf.org) Reliable condensation control Effective reduction of thermal losses Built-in Microban antimicrobial protection
More informationOTCF. Grid Solutions. Capacitor Voltage Transformers 72.5 kv to 800 kv. Quality Product Design. Seismic Withstand Capability.
GE Grid Solutions OTCF Capacitor Voltage Transformers 72.5 kv to 800 kv In high and extra high voltage transmission systems, capacitor voltage transformers (CVTs) are used to provide potential outputs
More informationCushion adhesive tapes
Cushion adhesive tapes BS MOUNT 20.100 20 Product thickness 0,55 mm (22 mil) Application thickness 0,50 mm (20 mil) High Screens, shades, lines and fine types Yellow foam Available in 6 compressibility
More informationMRO Adhesives & Sealants
MRO Adhesives & Sealants ISO 9001:2008 Certified Our Science... Your Success is a global manufacturer of engineering adhesives and sealants for manufacturing, assembly, repair, and maintenance. manufactures
More informationThe DispensGun and components are manufactured by Nordson EFD in the U.S.A.
The DispensGun and components are manufactured by Nordson EFD in the U.S.A. The DispensGun is easy to use and requires no special techniques. The amount dispensed is controlled by the squeeze of the trigger
More informationDM01. Battery Powered Precision Digital Gauge. Stainless Steel Sensor. class 0.05
Battery Powered Stainless Steel Sensor class 0.05 Nominal pressure from 0 00 mbar up to 0... 00 bar Special characteristics modular sensor concept data logger graphic display stainless steel housing Ø
More informationDryLin R Linear Plain Bearings, Fast and Quiet
+90º 40º +250º 100º Linear Plain Bearings, Fast and Quiet linear plain bearings, made from solid polymers, are dimensionally equivalent to standard ball bearings. They are made entirely of wear resistant
More informationPROMAX INSTRUCTION MANUAL
PROMAX INSTRUCTION MANUAL One Hand Activation Single Product [1 gpm (4l/m) models only] One Hand Activation 4 Product [1 gpm (4l/m) models only] Button Activation Single Product [1, 4, 8 gpm (4, 16, 30
More information3M Cold Shrink QT-III Silicone Rubber Termination 7673-S-8(S)-JCN
3M Cold Shrink QT-III Silicone Rubber Termination 7673-S-8(S)-JCN For Jacketed Concentric Neutral (JCN) Cable Instructions IEEE Std. No. 48-1996 Class 1 Termination 69 kv Class, 350 kv BIL IEC 60840 72,5
More information3M Cold Shrink QT-III Silicone Rubber Termination Kits 7640-T and 7650-T Series 5, 8, 15, 25/28 and 35 kv
3M Cold Shrink QT-III Silicone Rubber Termination Kits 7640-T and 7650-T Series 5, 8, 15, 25/28 and 35 kv Data Sheet September 2014 Description 3M Cold Shrink QT-III Silicone Rubber Termination Kits, 7640-T
More informationThermoelectric Module Installation Guidance
Thermoelectric Module Installation Guidance Introduction The aim of this document is to describe the process for mounting a thermoelectric module for use in a system. Considerations for mounting cooler
More informationSIGMADUR 520. PRODUCT DATA SHEET December 12, 2014 (Revision of May 01, 2013) DESCRIPTION
DESCRIPTION Two-component, high-build semi-gloss aliphatic acrylic polyurethane finish PRINCIPAL CHARACTERISTICS Easy application by roller and airless spray Unlimited recoatable Excellent resistance to
More informationTABLE OF CONTENTS BALANCING EQUIPMENT... VIBRATION ANALYSIS... CORE LOSS TESTERS... SAND BLASTING EQUIPMENT... DRY ICE BLASTING EQUIPMENT... WINDING M
TABLE OF CONTENTS BALANCING EQUIPMENT... VIBRATION ANALYSIS... CORE LOSS TESTERS... SAND BLASTING EQUIPMENT... DRY ICE BLASTING EQUIPMENT... WINDING MACHINES/HEADS... WIRE RACK SCALE... CUT-OFF SAWS...
More informationPower Electronics Roadmap. Updated by the Advanced Propulsion Centre in collaboration with and on behalf of the Automotive Council
Power Electronics Roadmap Updated by the Advanced Propulsion Centre in collaboration with and on behalf of the Automotive Council Executive summary: Power electronics The 2013 roadmap was developed alongside
More informationPlastic and Composite Repair Student Handouts
Plastic and Composite Repair Student Handouts Version: 13.2 2011-2014 Inter-Industry Conference on Auto Collision Repair PLA03-STHO02-E This page is intentionally left blank. STEP Clean The Part Two-Sided
More information5- Roll Coating Method
State of the Art Coating Technologies 5- Roll Coating Method by POLYTYPE CONVERTING Author - Gunter Roesler Contents 1. The Polytype Group- overview 2. Multi-Roll Coating Technology in High Speed Coating
More informationConveyor Belt Repairs Pg 1
www.cobond.com.au Conveyor Belt Repairs Pg 1 Faster, Stronger, Cheaper Repairs Conveyor Belt Repairs About CoBond Material Solutions: Challenging the way things are done, we are delivering cost effective
More informationBefestigungssysteme Klimatechnisches Zubehör. Fixing systems
Befestigungssysteme Klimatechnisches Zubehör Fixing systems With us, insulation work becomes enjoyable For almost three decades, we have been a leading enterprise in innovative systems for technical insulation
More informationMITRAS MATERIALS GMBH
MITRAS MATERIALS GMBH Friedrich-Ochs-Str. 2 92637 Weiden/Opf. Tel.: 0961 / 89-810 / 89-812 Fax: 0961 / 89-672 Directory of services L a b o r a t o r y MITRAS MATERIALS GMBH Edition 02/18 Rev. 08 page
More informationWhether it s a harsh outdoor environment or an indoor desktop, PowerFilm has an optimal solution for your application.
Electronic Component Solar Panels PowerFilm Electronic Component panels are well suited to power the wireless devices and sensors of the emerging IoT industry as well as many other battery operated and
More informationSurface Mount Terminal Blocks. 971-SLK-THR 5.00 mm (0.197 in) Spacing poles PICTURES TECHNICAL INFORMATION APROVAL INFORMATION.
page 1/5 Surface Mount Terminal Blocks 971-SLK-THR 5.00 mm (0.197 in) Spacing - 2-12 poles PICTURES 971-SLK-THR 971-SLK-THR & 950-HAF-DS TECHNICAL INFORMATION Description Pinstrip Typical application Technical
More informationDryLin R Linear Plain Bearings, Fast and Quiet
+90º 40º +250º 100º Linear Plain Bearings, Fast and Quiet linear plain bearings, made from solid polymers, are dimensionally equivalent to standard ball bearings. They are made entirely of wear resistant
More informationIMPROVEMENT ON MOUNTING THERMAL RESISTANCE BETWEEN A CIRCUIT BOARD WITH MANY COMPONENTS AND A LIQUID-COOLED COLD PLATE
ISTP-16, 2005, PRAGUE 16 TH INTERNATIONAL SYMPOSIUM ON TRANSPORT PHENOMENA IMPROVEMENT ON MOUNTING THERMAL RESISTANCE BETWEEN A CIRCUIT BOARD WITH MANY COMPONENTS AND A LIQUID-COOLED COLD PLATE Masao Fujii
More informationDryLin R Linear Plain Bearings, Fast and Quiet
+90º 40º +250º 100º Linear Plain Bearings, Fast and Quiet linear plain bearings, made from solid polymers, are dimensionally equivalent to standard ball bearings. They are made entirely of wear resistant
More informationMMP - Metal Film MELF
Specifications Per IEC 60115-1 D2 EN140401-803 B L D1 Features SMD enabled structure Excellent solderability termination Products meet RoHS requirements and do not contain substances of very high concern
More information3M Cold Shrink 1/C Transition Splice Kit QS-III, 5510A-1T-PILC Series
3M Cold Shrink 1/C Transition Splice Kit QS-III, 5510A-1T-PILC Series Data Sheet March 2011 Description 3M Cold Shrink 1/C Transition Splice Kits QS-III, 5510A-1T-PILC Series (which includes 5513A-1T-PILC,
More informationDryLin R Linear Plain Bearings, Fast and Quiet
+90º 40º +250º 100º Linear Plain Bearings, Fast and Quiet linear plain bearings, made from solid polymers, are dimensionally equivalent to standard ball bearings. They are made entirely of wear resistant
More informationBoat Hull, Propeller and Top-Side Protection
TM Boat Hull, Propeller and Top-Side Protection Increased performance Reduced maintenance Non-Toxic Nano-technology cathodic protection WORK or PLEASURE COMMERCIAL or SPORT PROTECTION AND PERFORMANCE IS
More informationLeak Repair T E C H N I C A L D A T A S H E E T. Description:
Leak Repair T E C H N I C A L D A T A S H E E T Description: The PowerPatch Leak Repair System provides fast and effective in-field leak repair for transformers, PILC cables, and other oil and gas insulated
More informationProudly Distributed by
Proudly Distributed by Loctite Penetrating Oil Heavy-duty penetrant for rusted and frozen assemblies. Works quickly to penetrate and loosen rust, tar, grease, dirt, carbon deposits and corrosion from metal
More informationFlexible Printed Circuits AUTOMOTIVE INNOVATION
Flexible Printed Circuits AUTOMOTIVE INNOVATION MEKTEC: THE FLEX SPECIALIST For over 30 years, the Mektec group has provided the most advanced technology and highest level of integration in the automotive
More informationintroduction TKD Series 3-Way Automated Ball Valves Product Data Sheet
Product Data Sheet introduction < STANDARDS > ASTM D1784 ASTM D2464 ASTM D2466 ASTM D2467 ASTM F1498 ASTM F437 ASTM F439 IPEX TKD Series 3-Way Automated Ball Valves can be used for flow diverting, mixing,
More informationintroduction VKD Series Automated Ball Valves Product Data Sheet < STANDARDS >
Product Data Sheet introduction < STANDARDS > ASTM D1784 ASTM D2464 ASTM D2466 ASTM D2467 ASTM D4101 ASTM F1498 ASTM F437 ASTM F439 IPEX VKD Series Automated Ball Valves offer a variety of advanced features
More informationCertified for best-in-class performance, reliability, and safety. Trihal sets a new standard for dry-type cast resin transformers
Certified for best-in-class performance, reliability, and safety Trihal sets a new standard for dry-type cast resin transformers Setting a new standard for dry-type cast resin transformers hospitals wind
More informationBS-40 BS-25 BS-27* BS-07* BS-10* BS-12* BS-22* BS-02* BS-15 BS-08 BS-39
COLOR OPTIONS Please Call For Availability SPECIALTY WHITE BLACK BROWN GREY CLEAR BS-02 BS-02-SD FEEL THE DIFFERENCE Of Our Soft Durometer Line *SD = Optional Soft Durometer Domestic Phone: 856-345-7650
More informationBonding & Fastening. Solutions. Panels. Information. All Around. Headliner. Instrument. Product. Page 1. Page 2. Page 3. Page 4-7
A. All Around Bonding & Fastening Page 1 B. Headliner Solutions Page 2 C. Instrument Panels Page 3 Product Information Page 4-7 ALL AROUND BONDING & FASTENING 6A 7A 10A 11A 3A 4A 5A 8A 12A 13A 2A 9A A1A
More informationSELECTOR GUIDE POTTING & ENCAPSULATING COMPOUNDS
SELECTOR GUIDE POTTING & ENCAPSULATING COMPOUNDS Epoxyset s potting and encapsulating compounds are fmulated f the demanding high perfmance requirements of the electrical and electronic industries f such
More informationFast Charge Electronic
for E-Mobility Fast Charge Electronic Intelligent Systems made in Germany w w w. s c h a e f e r p o w e r. d e Company Profile www.schaeferpower.de COMPANY SCHAEFER with its headquarter in South-Germany,
More informationTABLE 1-1 GPM FLOW RATE PROPORTIONER, 1/4 I.D. TUBING Injection Rates For Viscosities Shown Metering Tip Color
Blend Safe II Dispensing System is a modular, locking dispensing system that allows user to dispense chemicals safely, control dispenser inventory and has the flexibility in the field to meet changing
More information