Technical Data Europe. Focused. I nnovative. R esponsive.
|
|
- Aleesha Berry
- 5 years ago
- Views:
Transcription
1 Carbon Black Pigments Technical Data Europe Focused. I nnovative. R esponsive.
2 Analytical Test Methods Test Method ISO DIN ASTM Method for Determining the Surface Area International Organization for Standardization German Institute for Standardization American Society for Testing and Materials BET Surface Area ISO 4652 D 6556 Iodine Adsorption ISO 1304 DIN D 1510 Method for Determining the Structure Oil Absorption Number (OAN) ISO 4656 D 2414 Method for Characterizing the Carbon Black Pigment Surface Volatile Matter at 950 C DIN ph Value ISO D 1512 Method for Determining Impurities Ash Content ISO D 1506 Colorimetric Properties Blackness Value M Y of Powder Carbon Black Pigments DIN Relative Blackness Value MYr & Absolute Contribution of Hue internal method PA 1540 submitted for ISO Standard Tint Strength of Carbon Black ISO 5435 D 3265 Methods are not strictly equivalent 2
3 Orion Carbon Black Pigments Recommended for Coating Applications Blackness Value M Y following DIN Relative Tint Strength IRB 3 = 100 % following ASTM D 3265 Volatile Matter at 950 C following DIN Oil Adsorption Number following ASTM D 2414 ph Value following ISO Ash Content following ASTM D 1506 BET Surface Area following ASTM D 6556 Average Primary Particle Size following internal Method TGZ3 Automotive Coatings Industrial Coatings Decorative Coatings High Performance Powder Coatings Metallics Electro Deposition Coatings Antistatic Coatings % % ml/100 g % m² / g nm Type COLOUR BLACK FW 171 1) HCF w w COLOUR BLACK FW 285 1) HCG w w COLOUR BLACK FW 200 HCG COLOUR BLACK FW 2 HCG COLOUR BLACK FW 1 HCG w COLOUR BLACK FW 182 HCG PRINTEX 95 HCF PRINTEX 85 MCF SPECIAL BLACK 6 HCG COLOUR BLACK S 170 1) MCG SPECIAL BLACK 5 MCG COLOUR BLACK S 160 MCG SPECIAL BLACK 4 RCG PRINTEX U RCG PRINTEX V 1) RCG PRINTEX 140 U RCG PRINTEX 140 V 1) RCG SPECIAL BLACK 100 1) LCF PRINTEX G LCF LAMP BLACK 101 LB PRINTEX L RCF PRINTEX XE2-B ECB PRINTEX 200 1) 3) LCF SPECIAL BLACK 250 1) LCF ) Only available as powder Only available as beaded Carbon Black Pigment 3) Electrical Conductivity of the aqueous Extract 100 µs / cm Specific Gravity of Carbon Black Pigments g / cm³ Very high electrical conductivity PRINTEX XE2-B Very high electrical resistivity SPECIAL BLACK 4 The data for the beaded blacks may deviate from the given values. w High Jet Coatings Jet Coatings Tinting especially for waterborne coatings especially for radiation curing Conductivity Nomenclature HCG High Color Gas MCG Medium Color Gas RCG Regular Color Gas (Degussa Gas Black Process) HCF High Color Furnace MCF Medium Color Furnace RCF Regular Color Furnace LCF Low Color Furnace LB Lamp Black ECB Extra Conductive Black 3
4 Orion Carbon Black Pigments Blackness Value M Y following DIN Relative Tint Strength IRB 3 = 100 % following ASTM D 3265 Volatile Matter at 950 C following DIN Oil Adsorption Number following ASTM D 2414 ph Value following ISO Ash Content following ASTM D 1506 BET Surface Area following ASTM D 6556 Average Primary Particle Size following internal Method TGZ3 Reference % % ml / 100 g % m²/g nm COLOUR BLACK FW 200 HCG COLOUR BLACK FW 1 HCG COLOUR BLACK FW 18 HCG SPECIAL BLACK 4 RCG PRINTEX U RCG PRINTEX V RCG ) PRINTEX 95 HCF Nomenclature HCG High Color Gas RCG Regular Color Gas (Degussa Gas Black Process) HCF High Color Furnace MCF Medium Color Furnace RCF Regular Color Furnace LCF Low Color Furnace LB Lamp Black TB Thermal Black CB Conductive Black ECB Extra Conductive Black 1) Only available as powder Only available as beaded Carbon Black Pigment 4) Total Sulfur content 0.1 %, Electrical Conductivity of the aqueous Extract 150 µs / cm 5) Following products, used for food contact applications, which complies 21 CFR (FDA) can be found in a separate brochure: PRINTEX F 85 PRINTEX F 80 PRINTEX F alpha PRINTEX F P 6) Following products, used for Spin Fibres, can be found in a separate brochure: PRINTEX L 6 SQ only available as beaded Carbon Black Pigment PRINTEX alpha SQ only available as beaded Carbon Black Pigment 8) Content of renewable material > 85 % calculated PRINTEX 90 HCF PRINTEX 85 MCF ) HIBLACK 600L MCF PRINTEX 80 MCF ) PRINTEX 75 MCF AROSPERSE 11 RCF AROSPERSE 138 RCF AROSPERSE 26 RCF PRINTEX alpha, alpha-a RCF ) 5) 6) PRINTEX P, P-A RCF ) 5) PRINTEX 60 RCF ) PRINTEX 60-A RCF PRINTEX HV RCF ) HIBLACK 430H RCF PRINTEX L6 RCF ) PRINTEX L RCF ) HIBLACK 40B2 CF PRINTEX 300 RCF PRINTEX 30 RCF PRINTEX 3 RCF ) PRINTEX 25 LCF PRINTEX A LCF PRINTEX G LCF SPECIAL BLACK 100 LCF LAMP BLACK 101 LB AROSPERSE 15 TB PRINTEX XE2-B ECB PRINTEX Nature RCF ) 4
5 Selection of Carbon Black Pigments designed for the Polymer Industry Selected Polymers Typical Applications Polyolefines PE, PP, Copo Biopolymers PLA Styrene Polymers PS, SAN, ABS, ASA Polyamides PA6, PA6.6, PA12 Polyesters PET, PBT Polyvinylchlorides PVC-P, PVC-U Engineered Polymers PMMA, PC, Blends Thermosets UP, EP Insulation & Foams EPS, PUR, PP, PE Wire & Cables PE-Copo Pipes PE, PP, PA, PVC Films PE, PP, Copo, PVC Fibres PET, PA, PP Adhesive & Sealants PUR, PIB, Polysulfide, Silicons, MS Polymers Masterbatches & Compounds COLOUR BLACK FW 200 COLOUR BLACK FW 1 COLOUR BLACK FW 18 SPECIAL BLACK 4 PRINTEX U PRINTEX V PRINTEX 95 PRINTEX 90 PRINTEX 85 HIBLACK 600L PRINTEX 80 PRINTEX 75 AROSPERSE 11 AROSPERSE 138 AROSPERSE 26 PRINTEX alpha, alpha-a PRINTEX P, P-A PRINTEX 60 PRINTEX 60-A PRINTEX HV HIBLACK 430H PRINTEX L6 PRINTEX L HIBLACK 40B2 PRINTEX 300 PRINTEX 30 PRINTEX 3 PRINTEX 25 PRINTEX A PRINTEX G SPECIAL BLACK 100 Lamp Black 101 AROSPERSE 15 PRINTEX XE2-B PRINTEX Nature Jet black coloring Coloring Tinting Conductivity Stabilizing Reinforcement / Rheology 5
6 Orion Carbon Black Pigments Blackness Value M Y following DIN Relative Tint Strength IRB 3 = 100 % following ASTM D 3265 Volatile Matter at 950 C following DIN Oil Adsorption Number following ASTM D 2414 ph Value following ISO Ash Content following ASTM D 1506 BET Surface Area following ASTM D 6556 Average Primary Particle Size following internal Method TGZ3 Product Safety Issues for NIP specified additionally % % ml / 100 g % m²/g nm Nomenclature HCG High Color Gas MCG Medium Color Gas RCG Regular Color Gas (Degussa Gas Black Process) HCF High Color Furnace RCF Regular Color Furnace LCF Low Color Furnace Type NIPex 180 IQ 1) HCG NIPex 170 IQ 1) MCG NIPex 160 IQ 1) MCG NIPex 150 RCG NIPex 90 1) HCF NIPex 70 1) RCF NIPex 60 1) RCF NIPex 35 LCF SPECIAL BLACK 4 RCG SPECIAL BLACK 4A 1) 7) RCG PRINTEX U RCG PRINTEX V 1) RCG PRINTEX 60 1) RCF PRINTEX 60-A RCF SPECIAL BLACK 550 1) RCF PRINTEX 55 RCF SPECIAL BLACK 535 LCF PRINTEX 45 RCF SPECIAL BLACK 350 1) LCF NEROX ) LCF PRINTEX 35 LCF PRINTEX 300 RCF PRINTEX 30 RCF PRINTEX 3 1) RCF SPECIAL BLACK 250 1) LCF NEROX ) LCF PRINTEX 25 LCF PRINTEX A LCF PRINTEX G LCF PRINTEX Nature 8) RCF Products, used for Black Matrix applications, can be found in a separate brochure. Please contact the address given on the back of this brochure. 1) Only available as powder Only available as beaded Carbon Black Pigment 7) Volatile Matter 105 C approx. 7.5 % 8) Content of renewable material > 85 % calculated 6
7 Recommended for Printing Ink and Non Impact Printing Applications Sheetfed / Letterpress Heatset Coldset Publication Gravure Inks Liquid Inks (Flexo / Gravure) Solvent Based Liquid Inks (Flexo / Gravure) Water Based Screen Printing UV Curing Inks UV Curing Inkjet Inks Aqueous Inkjet Inks Non-aquous Inkjet Inks Toner Type NIPex 180 IQ 1) NIPex 170 IQ 1) NIPex 160 IQ 1) NIPex 150 NIPex 90 1) NIPex 70 1) NIPex 60 1) NIPex 35 SPECIAL BLACK 4 1) 7) SPECIAL BLACK 4A PRINTEX U PRINTEX V 1) PRINTEX 60 1) PRINTEX 60-A SPECIAL BLACK 550 1) PRINTEX 55 SPECIAL BLACK 535 PRINTEX 45 SPECIAL BLACK 350 1) NEROX ) PRINTEX 35 PRINTEX 300 PRINTEX 30 PRINTEX 3 1) SPECIAL BLACK 250 1) NEROX ) PRINTEX 25 PRINTEX A PRINTEX G PRINTEX Nature Especially recommended Well suitable Specific gravity of Carbon Black Pigments: g / cm 3 The data for beaded blacks may deviate from the given values. 7
8 Focused. I nnovative. R esponsive. The Americas Orion Engineered Carbons LLC 4501 Magnolia Cove Drive Suite 106 Kingwood, TX USA phone fax Americas-Pigments@orioncarbons.com Europe / Middle East / Africa Orion Engineered Carbons GmbH Hahnstraße Frankfurt am Main Germany phone fax EMEA-Pigments@orioncarbons.com Asia Pacific Orion Engineered Carbons Trading (Shanghai) Co., Ltd. Room BM InterContinental Business Center 100 Yutong Road Shanghai, China phone APAC-Pigments@orioncarbons.com All information and statements contained herein are believed to be accurate. Orion Engineered Carbons GmbH, its agents and/or affiliates composed the information and statements to the best of their respective knowledge. However, the information and statements contained herein shall not be construed as a license or recommendation for use. All sales are subject to Orion Engineered Carbon GmbH Standard Terms and Conditions of Sale, including but not limited to the limited warranty of such Orion Engineered Carbon GmbH Standard Terms and Conditions of Sale. The information and statements contained herein do not amplify, extend, or broaden the liability of Orion Engineered Carbons GmbH, its agents and/or affiliates under the Orion Engineered Carbon GmbH Standard Terms and Conditions of Sale in any way. To prevent damages or infringement of any proprietary right, the customer has to check any and all information before using or applying it Orion Engineered Carbons GmbH OEC-12 / 2012
Specialty Carbon Blacks
Specialty Carbon Blacks Technical Data Asia Pacific Focused. I nnovative. R esponsive. Analytical Test Methods Test Method ISO DIN ASTM Specialty Carbon Blacks Recommended for Coating Applications Method
More informationSpecialty Carbon Blacks Technical Data Europe
Specialty Carbon Blacks Technical Data Europe Focused. Innovative. Responsive. Analytical Test Methods Test Method ISO DIN ASTM Method for Determining the Surface Area International Organization for Standardization
More informationCarbon Black Pigments. Technical Data / Americas
Carbon Black Pigments Technical Data / Americas Forward Orion Engineered Carbons and its predecessors have been producing carbon black pigments since 1935 to meet the most demanding highperformance applications
More informationRubber Blacks. Technical Data Europe - Middle East - Africa. Focused. I nnovative. R esponsive.
Rubber Blacks Technical Data Europe - Middle East - Africa Focused. I nnovative. R esponsive. Table 1 Product Range ASTM Carbon Blacks CORAX N 115 CORAX N 121 CORAX N 134 CORAX N 220 CORAX N 234 CORAX
More informationCHEZACARB. Conductive Carbon Black for Polymer Compounds SIMPLY IMPROVING EVERYDAY LIFE
CHEZACARB Carbon Black for Polymer Compounds SIMPLY IMPROVING EVERYDAY LIFE CHEZACARB AC COMPOUNDS CHEZACARB Volume resistivity as a function of CB content (extruded sheets) 1E+09 Carbon Black for Polymer
More informationPaliotol Yellow K 0961 HD
Technical Information Plastic Additives TI/EVN 1184 e November 21 Page 1 of 6 = registered Trademark of BASF Specialty Chemicals Holding GmbH Paliotol Yellow K 961 HD General properties Chemical character
More informationBuild your properties
Advanced Materials Build your properties Ambient curing systems Selector guide Nomenclature Curing agents Huntsman Advanced Materials registered trademark for commercial hardeners is Aradur. Example: Aradur
More informationALLROUNDER 630 A. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100.
Facts and figures ALLROUNDER Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100 www.arburg.com Machine dimensions 2217 227 1487 max. 450 877
More informationDEGALAN. Designed Polymers by Adhesive Resins Product Line
DEGALAN Designed Polymers by Adhesive Resins Product Line Welcome from the Adhesive Experts of Evonik Our Product Range Discover our product portfolio designed for the Adhesives & Sealants Industry. Based
More informationCABELEC Conductive Compounds Product Selection Guide
Conductive Compounds CABELEC Conductive Compounds Product Selection Guide CABELEC Conductive Compounds Product SELECTION Guide Cabot s Performance Materials: Over 130 Years of Getting You Where You Want
More informationProduct Overview. Polymer ST and TEGOPAC
Product Overview Polymer ST and TEGOPAC BUILDING & CONSTRUCTION APPLICATION PRODUCTS Polymer ST 48 Polymer ST 61 Polymer ST 61 LV* Sealants for expansion/façade joints Adhesives for DIY and professionals
More informationALLROUNDER 720 H. Distance between tie bars: 720 x 720 mm Clamping force: 3200 kn Injection unit (according to EUROMAP): 1300, 2100, 3200
Facts and figures ALLROUNDER 72 H Distance between tie bars: 72 x 72 mm Clamping force: 32 kn Injection unit (according to EUROMAP): 13, 21, 32 www.arburg.com 72 H Machine dimensions 858 2198 max. 385
More informationALLROUNDER 520 E. Distance between tie bars: 520 x 520 mm Clamping force: 1500 kn Injection unit (acc. to EUROMAP): 290, 400, 800.
Facts and figures ALLROUNDER 52 E Distance between tie bars: 52 x 52 mm Clamping force: 15 kn Injection unit (acc. to EUROMAP): 29, 4, www.arburg.com 52 E Machine dimensions 2 135 85 12 33 4 13 625 4885
More informationALLROUNDER 720 A Multi-component
Facts and figures ALLROUNDER 72 A Multi-component Distance between tie bars: 72 x 72 mm Clamping force: 32 kn Injection unit: 8, 13, 21 horizontal 7, 17, 29, 4 vertical www.arburg.com 72 A Multi-component
More informationALLROUNDER 630 H. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100.
Facts and figures ALLROUNDER 63 H Distance between tie bars: 63 x 63 mm Clamping force: 25 kn Injection unit (acc. to EUROMAP): 8, 13, 21 www.arburg.com 63 H Machine dimensions 858 438 1468 2198 max. 395
More informationALLROUNDER 370 E. Distance between tie bars: 370 x 370 mm Clamping force: 600 kn Injection unit (acc. to EUROMAP): 170, 290.
Facts and figures ALLROUNDER 37 E Distance between tie bars: 37 x 37 mm Clamping force: 6 kn Injection unit (acc. to EUROMAP): 17, 29 www.arburg.com 37 E Machine dimensions 215 122 85 12 33 435 192 245
More informationALLROUNDER 570 H. Distance between tie bars: 570 x 570 mm Clamping force: 2000 kn Injection unit (acc. to EUROMAP): 400, 800, 1300.
Facts and figures ALLROUNDER 57 H Distance between tie bars: 57 x 57 mm Clamping force: 2 kn Injection unit (acc. to EUROMAP): 4, 8, 13 www.arburg.com 57 H Machine dimensions 22 148 85 438 2242 1) 2251
More informationFacts and figures ALLROUNDER 1500 T
Facts and figures ALLROUNDER 15 T Table diameter: 59.6 (15 mm) Clamping force: 176, 22, 275, 35 tons : 3.7 oz, 6.1 oz, 8.2 oz, 15.3 oz, 29.1 oz, 45.4 oz www.arburg.com 15 T Machine dimensions up to 22
More informationALLROUNDER 270 A. Distance between tie bars: 270 x 270 mm Clamping force: 350 kn Injection unit (acc. to EUROMAP): 5, 70, 100.
Facts and figures ALLROUNDER 27 A Distance between tie bars: 27 x 27 mm Clamping force: 35 kn Injection unit (acc. to EUROMAP): 5, 7, 1 www.arburg.com 27 A Machine dimensions 238 122 12 425 254 438 191
More informationALLROUNDER 630 S. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100.
Facts and figures ALLROUNDER 630 S Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100 www.arburg.com 630 S Machine dimensions 2183 5) 2207
More information820 S. Machine dimensions. Electrical connection. Cooling water connection 850 6) 878 7) 960 5) 113/438 4) ) ) ) )6) )
Facts and figures ALLROUNDER 820 S Distance between tie bars: 820 x 820 mm Clamping force: 4000 kn Injection unit (acc. to EUROMAP): 2100, 3200, 4600 www.arburg.com 820 S Machine dimensions 2250 5) 2342
More informationPolymer ST and TEGOPAC. Product Overview
Polymer ST and TEGOPAC Product Overview Building & Construction Products Application Polymer ST 48 Polymer ST 61 Polymer ST 61 LV* Sealants for expansion/façade joints Adhesives for DIY and professionals
More informationALLROUNDER 520 S. Distance between tie bars: 520 x 520 mm Clamping force: 1300, 1500, 1600 kn Injection unit (acc. to EUROMAP): 290, 400, 800
Facts and figures ALLROUNDER 520 S Distance between tie bars: 520 x 520 mm Clamping force: 1300, 1500, 1600 kn Injection unit (acc. to EUROMAP): 290, 400, www.arburg.com 520 S Machine dimensions 580 330
More informationInspiring design innovation
IROGRAN Thermoplastic Polyurethanes Inspiring design innovation Product Overview IROGRAN TPU: Inspiring design innovation The manufacture of modern products, engineering components and technical parts
More informationALLROUNDER 470 S. Distance between tie bars: 470 x 470 mm Clamping force: 800, 1000, 1100 kn Injection unit (acc. to EUROMAP): 170, 290, 400
Facts and figures ALLROUNDER 470 S Distance between tie bars: 470 x 470 mm Clamping force: 800, 1000, 1100 kn Injection unit (acc. to EUROMAP):, 290, 400 www.arburg.com 470 S Machine dimensions 585 330
More informationSilicas and Silicates
Silicas and Silicates for Animal Feed and Nutrition Enabling customer solutions through advanced product technology and dedicated application support Industry Brochure 316 (EU) FREE-FLOW ADDITIVES At Evonik,
More informationMore silica grades from Evonik see also
This information and any recommendations, technical or otherwise, are presented in good faith and believed to be correct as of the date prepared. Recipients of this information and recommendations must
More informationCONDUCTIVE COMPOUNDS. CABELEC Conductive Compounds Product Selection Guide
CONDUCTIVE COMPOUNDS CABELEC Conductive Compounds Product Selection Guide Cabot s Performance Materials: Over 130 Years of Getting You Where You Want to Go Cabot Corporation is a global performance materials
More informationCompostable Solutions for Packaging. FlexPackCon 2016 Randy Jester
Compostable Solutions for Packaging FlexPackCon 2016 Randy Jester 10/14/2016 1 Overview Film structural polymers ecovio aliphatic-aromatic polyester / PLA blend ecoflex aliphatic-aromatic polyester Packaging
More informationALLROUNDER 520 A. Distance between tie bars: x (520 x 520 mm) Clamping force: 165 tons Injection unit: 6.1 oz, 8.2 oz, 15.
Facts and figures ALLROUNDER 52 A Distance between tie bars: 2.47 x 2.47 (52 x 52 mm) Clamping force: 165 tons Injection unit: 6.1 oz, 8.2 oz, 15.3 oz www.arburg.com 52 A Machine dimensions 78.8 53.7 33.44
More informationALLROUNDER 720 S Multi-component
Facts and figures ALLROUNDER 72 S Multi-component Distance between tie bars: 72 x 72 mm Clamping force: 32 kn Injection unit: 13, 21, 32 horizontal 7, 1, 17, 29, 4 vertical www.arburg.com 72 S Multi-component
More informationALLROUNDER 270 C GOLDEN EDITION
Facts and figures ALLROUNDER 2 C GOLDEN EDITION Distance between tie bars: 2 x 2 mm Clamping force: 4 kn Injection unit (acc. to EUROMAP):, 1 www.arburg.com 2 C GOLDEN EDITION Machine dimensions 85 33
More informationALLROUNDER 570 C GOLDEN EDITION
Facts and figures ALLROUNDER 57 C GOLDEN EDITION Distance between tie bars: 57 x 57 mm Clamping force: 2 kn Injection unit (acc. to EUROMAP): 8 www.arburg.com 57 C GOLDEN EDITION Machine dimensions 255
More informationALLROUNDER CUBE 2900
Facts and figures ALLROUNDER CUBE 29 Distance between tie bars: 82 x 82 mm Clamping force: 29 kn Injection unit: 4, 8, 13, 21, 32 horizontal 7, 17, 29, 4, 8, 13 moving www.arburg.com CUBE 29 Machine dimensions
More informationALLROUNDER 520 A multi-component
Facts and figures ALLROUNDER 52 A multi-component Distance between tie bars: 52 x 52 mm Clamping force: 15 kn Injection unit: 29, 4, 8 horizontal 7, 17, 29 vertical www.arburg.com 52 A multi-component
More informationAEROSIL 200 F. Hydrophilic fumed silica. Applications and properties. Safety and handling. Packaging and storage. Characteristic physico-chemical data
Product information Hydrophilic fumed silica Characteristic physico-chemical data Properties and test methods Unit Value Specific surface area (BET) m 2 /g 175-225 ph value in 4% dispersion Loss on drying*
More informationALLROUNDER 820 S Multi-component
Facts and figures ALLROUNDER 82 S Multi-component Distance between tie bars: 82 x 82 mm Clamping force: 4 kn Injection unit: 21, 32, 46 horizontal 7, 1, 17, 29, 4 vertical www.arburg.com 82 S Multi-component
More informationFacts and figures ALLROUNDER 375 V. Vertical free-space system Clamping force: 500 kn Injection unit (acc. to EUROMAP): 100, 170, 290.
Facts and figures ALLROUNDER 375 V Vertical free-space system Clamping force: 500 kn Injection unit (acc. to EUROMAP): 100, 1, 290 www.arburg.com 375 V Installation dimensions Vertical version 1050 850
More informationThe whiter white effect pigment. Glacier Exterior Frost White
The whiter white effect pigment Glacier Exterior Frost White Lightness L* volume (%) Glacier Exterior Frost White EH 568 (S1303D) * Glacier Exterior Frost White is the whitest effect pigment in today s
More information3M TM Dyneon TM Fluoroplastics. Product Comparison Guide.
3M TM Dyneon TM Fluoroplastics Product Comparison Guide. Characteristics 3M Dyneon Fluoroplastics. Nominal values, not for specification purposes 1) Melt Index is measured at the following conditions 265
More informationAdditives for Greener Systems
Substance for Success. Product Guide B-G 2 Additives for Greener Systems NAFTA market only Greenability Greenability There is no green standard, which is broadly accepted by the global industry. Within
More informationRegulations on papers & boards in Germany. Stefan Merkel
FEDERAL INSTITUTE FOR RISK ASSESSMENT Regulations on papers & boards in Germany Stefan Merkel 2 Germany Resolution of the Council of Europe with its adopted parts exists in parallel with national law.
More informationRaw Materials for Pressure-Sensitive Adhesives
Raw Materials for Pressure-Sensitive Adhesives Table of Contents 03 Best adhesion properties for all applications 04 05 Labels 06 Primers for Plastic Films 07 Graphic Films 08 09 Specialty Tapes 10 11
More informationALLROUNDER 470 S Multi-component
Facts and figures ALLROUNDER 47 S Multi-component Distance between tie bars: 47 x 47 mm Clamping force: 11 kn Injection unit: 17, 29, 4 horizontal 3, 7, 1, 17, 29 vertical www.arburg.com Machine dimensions
More informationThermx PCT. High-performance Polyester. Product and Properties Guide
Thermx PCT High-performance Polyester Product and Properties Guide Thermx Chemical resistance Processability Dimensional stability Heat resistance Fast molding cycles Thermx PCT polyester is a hightemperature
More informationBADA CORPORATE PRESENTATION QUALITY FLEXIBILITY RELIABILITY YOUR INDIVIDUAL SPECIALIST FOR PLASTICS
BADA CORPORATE PRESENTATION YOUR INDIVIDUAL SPECIALIST FOR PLASTICS QUALITY FLEXIBILITY RELIABILITY BADA OUR EXPERTISE AT A GLANCE 3 BADA FACTS TWO STATE-OF-THE-ART PRODUCITON SITES Bühl (Baden)/Germany
More informationALLROUNDER 570 S. Distance between tie bars: x (570 x 570 mm) Clamping force: 176, 220, 242 tons Injection unit: 8.2 oz, 15.3 oz, 29.
Facts and figures ALLROUNDER 57 S Distance between tie bars: 22. x 22. (57 x 57 mm) Clamping force: 176, 22, 22 tons Injection unit: 8.2 oz, 15.3 oz, 29.1 oz www.arburg.com 57 S Machine dimensions 78.7
More informationVISCOBASE Synthetic Base Fluids ECONOMICAL SOLUTIONS FOR HIGH-PERFORMANCE AUTOMOTIVE AND INDUSTRIAL GEAR OILS
VISCOBASE Synthetic Base Fluids ECONOMICAL SOLUTIONS FOR HIGH-PERFORMANCE AUTOMOTIVE AND INDUSTRIAL GEAR OILS HIGH-PERFORMANCE BASE FLUIDS AND LUBRICANT ADDITIVES The Oil Additives specialists at Evonik
More informationVISCOBASE Synthetic Base Fluids. Economical solutions for high-performance automotive and industrial gear oils
VISCOBASE Synthetic Base Fluids Economical solutions for high-performance automotive and industrial gear oils High-performance base fluids and lubricant additives The oil additives specialists at Evonik
More informationALLROUNDER 270 S. Distance between tie bars: x (270 x 270 mm) Clamping force: 28, 38, 44 tons Injection unit: 1.4 oz, 2.3 oz, 3.
Facts and figures ALLROUNDER 27 S Distance between tie bars: 1.63 x 1.63 (27 x 27 mm) Clamping force: 28, 38, 44 tons Injection unit: 1.4 oz, 2.3 oz, 3.7 oz www.arburg.com 27 S Machine dimensions 78.35
More informationProduct information. cuturon. neobond pretex
Product information cuturon neobond pretex pretex impregnated special papers neobond robust synthetic fibre papers cuturon versatile nonwovens PRODUCT SPECIFICATION High-quality, impregnated special paper:
More informationFacts and figures ALLROUNDER 275 V. Vertical free-space system Clamping force: 250 kn Injection unit (according to EUROMAP): 70, 100.
Facts and figures ALLROUNDER 275 V Vertical free-space system Clamping force: 250 kn Injection unit (according to EUROMAP):, 100 www.arburg.com 275 V Installation dimensions 900 665 1782 2880 1) 3025 2)
More informationMITRAS MATERIALS GMBH
MITRAS MATERIALS GMBH Friedrich-Ochs-Str. 2 92637 Weiden/Opf. Tel.: 0961 / 89-810 / 89-812 Fax: 0961 / 89-672 Directory of services L a b o r a t o r y MITRAS MATERIALS GMBH Edition 02/18 Rev. 08 page
More informationNutrinova Sorbates PURE. RELIABLE. ACCOUNTABLE. Celanese
Nutrinova Sorbates PURE. RELIABLE. ACCOUNTABLE. Celanese When brand protection matters Pure. Reliable. Accountable. Purity Consistent high quality, predictable purity and stability White product with characteristic
More informationMacroPower MC t The flexible large-molding machine. world of innovation
400 2000 t The flexible large-molding machine world of innovation MacroPower MULTI-COMPONENT SERIES Extra functionality and more freedom for design COMBIMOULD is the multi-component technology from WITTMANN
More informationBrown pigment - High Performance, special with high thermal stability
Product Information Bayferrox 645 T Description Type Delivery form Chemical class Colour Index CAS-No. REACH registration no. Specification Brown pigment - High Performance, special with high thermal stability
More informationStandard Classification System for Carbon Blacks Used in Rubber Products 1
Designation: D 1765 04 Standard Classification System for Carbon Blacks Used in Rubber Products 1 This standard is issued under the fixed designation D 1765; the number immediately following the designation
More informationALLROUNDER 320 C GOLDEN EDITION
Facts and figures ALLROUNDER 32 C GOLDEN EDITION Distance between tie bars: 12.6 x 12.6 (32 x 32 mm) Clamping force: 55 tons Injection unit: 2.3 oz, 3.7 oz www.arburg.com 32 C GOLDEN EDITION Machine dimensions
More informationSealon Adhesive PTFE Gasket Tape. Technical Data Sheet
Page 1 of 6 is a versatile, easy to use sealing tape that lets you make your own gaskets in an instant. It s made from expanded PTFE which makes it very easy to shape and allows it to compress with only
More informationHari Shankar Singhania Elastomer & Tyre Research Institute, HASETRI, Plot No. 437, R&D Center, Hebbal Industrial Area, Mysuru, Karnataka
Page 1 of 11 CHEMICAL TESTING I. RUBBER AND RUBBER PRODUCTS 1. Polymer/ Elastomeric materials 2. Fillers Heat Loss of carbon black Ash content ASTM D5667 0.1-45 % ISO 247 Dirt Content ASTM D1278 0.1-10
More informationAntifreeze Resistant Fatigue Resistant Gasoline Resistance Automotive Under the Hood ASTM D 4066 PA012G30 ASTM D 6779 PA012G30
Vydyne R530H Nylon resins are general purpose polyamide, heat stabilized, hydrolysis resistant, 30% glass fiber reinforced resins. Available in natural and black. It is specifically designed to maximize
More informationSuperior Performance. VISCOPLEX ADDITIVES FOR MOBILE HYDRAULIC EQUIPMENT
Superior Performance. VISCOPLEX ADDITIVES FOR MOBILE HYDRAULIC EQUIPMENT AGRICULTURE CONSTRUCTION MINING FORESTRY In the field of agriculture, equipment can be a cost driver and the lifeblood for operation.
More informationMARKET OVERVIEW/SYSTEM COMPONENTS & PERFORMANCE ADDITIVES. Product Overview
Creating tomorrow s solutions MARKET OVERVIEW/SYSTEM COMPONENTS & PERFORMANCE ADDITIVES HDK Pyrogenic Silica Product Overview HDK turns an intelligent solution INTO BRILLIANCE HDK Pyrogenic Silica Formation
More informationALLROUNDER 920 A. Distance between tie bars: 920 x 920 mm Clamping force: 4600, 5000 kn Injection unit (acc. to EUROMAP): 1300, 2100
ALLROUNDER 920 A Distance between tie bars: 920 x 920 mm Clamping force: 4600, 5000 kn Injection unit (acc. to EUROMAP): 1300, 2100 MACHINE DIMENSIONS 920 A 877 239 707 1100 2229 1207 1697 2671 max.430
More informationFree-Flow Additives for the Food Industry. Industry Brochure 315 (EU)
Free-Flow Additives for the Food Industry Industry Brochure 315 (EU) ANTI-CAKING SILICA AND SILICATE PRODUCTS DESIGNED SPECIFICALLY FOR POWDERED FOOD PRODUCTS 2 L+L 17-01-363 vnd IB Anti-Caking Silica
More informationTextile Effects NOVACRON XKS HD reactive inks. Intense shades and savings for industrial ink jet printing
Textile Effects NOVACRON XKS HD reactive inks Intense shades and savings for industrial ink jet printing NOVACRON XKS HD Reactive inks for industrial printing machines based on Kyocera printing heads Have
More informationALLROUNDER 820 A. Distance between tie bars: 820 x 820 mm Clamping force: 3700, 4000 kn Injection unit (acc. to EUROMAP): 1300, 2100
ALLROUNDER 820 A Distance between tie bars: 820 x 820 mm Clamping force: 3, 4000 kn Injection unit (acc. to EUROMAP): 1300, 2100 MACHINE DIMENSIONS 820 A 875 567 707 1100 178 433 482 2355 625 2800 3) 7476
More informationElastollan Product Range
Thermoplastic Polyurethane Elastomers (TPU) Elastollan Product Range Elastogran is Polyurethanes Contents Quality management to DIN EN ISO 9001 Page 2 Nomenclature for Elastollan Page 3 Packaging, Storage
More informationSPECIALTY CARBON BLACKS HIGH PERFORMANCE MATERIALS FOR ADVANCED LITHIUM-ION BATTERIES
SPECIALTY CARBON BLACKS HIGH PERFORMANCE MATERIALS FOR ADVANCED LITHIUM-ION BATTERIES Introduction Cabot Corporation is a global performance materials company and we strive to be our customers commercial
More informationWaxes for pigment dispersion in polar and non polar plastics
Waxes for pigment dispersion in polar and non polar plastics 1st International Conference on Masterbatch & Compound 15th/16th of February 2016 - Tehran 1 Classification of PE-waxes and effects in colour
More informationFischer-Tropsch Hard Waxes. Sasol Performance Chemicals
Fischer-Tropsch Hard Waxes Sasol Performance Chemicals About us At a glance About us Sasol s Performance Chemicals business unit markets a broad portfolio of organic and inorganic commodity and speciality
More informationARALDITE AV 8574 Resin Hardener HV 8574
Advanced Materials ARALDITE AV 8574 Resin Hardener HV 8574 HEAT- AND CHEMICAL-RESISTANT EPOXY ADHESIVE DESCRIPTION ARALDITE AV 8574 Resin/Hardener HV 8574 epoxy adhesive is a twocomponent system suitable
More informationPromix Solutions trust the leader. Static Mixers Solutions for Injection Molding
Promix Solutions trust the leader Static Mixers Solutions for Injection Molding Your partner in the plastics processing industry Founded in 2012 as a spin-off of Sulzer Chemtech Subsidiaries in Winterthur,
More informationToppTube PA11 (Polyamide) page 4. ToppTube PA12 (Polyamide) page 5. ToppTube PA12HIPHL (Polyamide) page 6. ToppTube PUR 98A (Polyurethane) page 7
ToppTube PA11 (Polyamide) page 4 ToppTube PA12 (Polyamide) page 5 ToppTube PA12HIPHL (Polyamide) page 6 ToppTube PUR 98A (Polyurethane) page 7 ToppTube PE-LD (Polyethylene) page 8 ToppTube PE-LLD (Polyethylene)
More informationFischer-Tropsch Hard Waxes
Fischer-Tropsch Hard Waxes Sasol Wax is the leading specialist in innovative wax technology. An introduction to Sasolwax Fischer-Tropsch Hard Waxes Sasol Wax produces superlative, high quality, competitive
More informationTHIXATROL PRO. New organic thixotrope for ultra thick protective coatings. Innovation Compliance High Performance. Application Leaflet.
Application Leaflet March 2013 Rheology leadership plus so much more... THIXATROL PRO Key Benefits Superior sag resistance Excellent overcoatability Excellent humidity and salt-spray resistance New organic
More informationCONDUCTIVE COMPOUND AND CONCENTRATES CABELEC CONDUCTIVE COMPOUNDS AND CONCENTRATES PRODUCT SELECTION GUIDE
CONDUCTIVE COMPOUND AND CONCENTRATES CABELEC CONDUCTIVE COMPOUNDS AND CONCENTRATES PRODUCT SELECTION GUIDE Performance and leadership in black plastics Cabot Corporation is a global performance materials
More informationALLROUNDER 520 H. Distance between tie bars: 520 x 520 mm Clamping force: 1500 kn Injection unit (acc. to EUROMAP): 290, 400, 800
ALLROUNDER 520 H Distance between tie bars: 520 x 520 mm Clamping force: 1500 kn Injection unit (acc. to EUROMAP): 290, 400, 800 MACHINE DIMENSIONS 520 H 2002 1348 255 849 120 330 max. 385 438 507 800
More informationProduct Information. COLORTHERM Yellow Description. Specification
Product Information COLORTHERM Yellow 3950 Description Type Delivery form Yellow Pigment with increased heat stability for the paint and plastics industry Powder Chemical class Synthetic Zincferrite ZnFe
More informationAcronal PLUS Meeting stringent environmental standards while delivering outstanding weathering performance
PLUS 4235 Meeting stringent environmental standards while delivering outstanding weathering performance PLUS 4235 Meeting stringent environmental standards while delivering outstanding weathering performance.
More informationProcess Filtration From Pure to Sterile
From Pure to Sterile MAIN FEATURES & BENEFITS: High dirt holding capacity at low differential pressure and high flow rate Highly durable stainless-steel design Regenerable by ultrasonication or back flushing
More informationTECHNICAL DATA SHEET CA8000. Desothane HS CA8000 Polyurethane Topcoat (EMEA) Product Description. Components. Specifications
TECHNICAL DATA SHEET Product Description Desothane HS is a low VOC, polyurethane topcoat used to provide protection and decoration to aircraft exterior surfaces. topcoat is designed to be applied over
More informationALLROUNDER 920 S. Distance between tie bars: 920 x 920 mm Clamping force: 5000 kn Injection unit (acc. to EUROMAP): 2100, 3200, 4600
ALLROUNDER 920 S Distance between tie bars: 920 x 920 mm Clamping force: 5000 kn Injection unit (acc. to EUROMAP): 2100, 3200, 4600 MACHINE DIMENSIONS 920 S 2425 4) 2530 5) 1670 4) 1697 5) 848 4) 878 5)
More informationALLROUNDER 470 A. Distance between tie bars: 470 x 470 mm Clamping force: 1000 kn Injection unit (acc. to EUROMAP): 170, 290, 400
ALLROUNDER 470 A Distance between tie bars: 470 x 470 mm Clamping force: 1000 kn Injection unit (acc. to EUROMAP):, 290, 400 MACHINE DIMENSIONS 470 A 840 330 438 1302 2050 2124 1)2) 2139 3) 400 1109 max.
More informationEAST AFRICAN STANDARD. Automotive gasoline (premium motor spirit) Specification EAST AFRICAN COMMUNITY. HS (regular); HS
EAST AFRICAN STANDARD Automotive gasoline (premium motor spirit) Specification EAST AFRICAN COMMUNITY HS 2710.11.10(regular); HS 2710.11.10(premium) ICS 75.160.20 EAS 2011 Second Edition 2011 ii Table
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17640-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 18.12.2017 to 04.11.2018 Holder of certificate: Haltermann
More informationALLROUNDER 570 E. Distance between tie bars: 570 x 570 mm Clamping force: 2000 kn Injection unit (acc. to EUROMAP): 400, 800
ALLROUNDER 570 E Distance between tie bars: 570 x 570 mm Clamping force: 2000 kn Injection unit (acc. to EUROMAP): 400, 800 MACHINE DIMENSIONS 570 E 1900 850 150 330 520 1285 825 435 605 1000 280 5185
More informationConstruction. Product description:
Technical Data Sheet Edition 09.02 DS-Code: E 5161 Sikaflex - Tank Single-component elastic joint-sealing system for storage/ filling/handling facilities for water-polluting liquids, approval no. Z-74.6-6
More informationFORMULATING YOUR VISION WITH OUR EXPERTISE. Celanese Dispersions for Adhesives
FORMULATING YOUR VISION Celanese Dispersions for Adhesives About Celanese FORMULATING YOUR VISION The Company We are a global technology and specialty materials company based in Dallas, Texas, operating
More informationIndustrial Waxes Textile & Leather
Industrial Waxes Textile & Leather Sasol Performance Chemicals About Us About Us Sasol s Performance Chemicals business unit markets a broad portfolio of organic and inorganic commodity and speciality
More informationProduct information. COLORTHERM Yellow 30. Description. Specification. Specification. Yellow pigment
Product information COLORTHERM Yellow 30 Description Type Delivery form Chemical class Colour Index CAS-No. REACH registration no. Specification Yellow pigment powder Synthetic zinc ferrite ZnFe 2 O 4
More informationExtend Compressor Life with UCON RSC-155 Lubricant
Extend Compressor Life with UCON RSC-155 Lubricant High-Performance Polyalkylene Glycol (PAG)-Based Synthetic Lubricant for Rotary Screw Compressors Case Study: UCON Compressor Lubricant RSC-155 Yields
More informationProduct News. Recovery Systems for Water- and Solvent based flows
Product News Recovery Systems for Water- and Solvent based flows COATINGS PIGMENTS - PAINTS - DYE Target group Pigment production Paint, Cosmetics, Automotive, Powder Coatings, Industry Coatings, Packaging
More information44GN098 Water Reducible High Performance Epoxy Primer
TECHNICAL DATA SHEET Product Description Components is a chrome-free, water reducible, chemically cured, two-component epoxy polyamide primer. Corrosion inhibiting Chemical and solvent resistant Resistant
More informationHiTec Paper. Barrier Paper
www.mitsubishi-paper.com HiTec Paper. Barrier Paper Mitsubishi HiTec Paper Passion for First Class HiTec Papers As a leading international supplier of direct thermal, inkjet, carbonless, label and barrier
More informationTEGO Sulpho. Release Agent for Sulphur Forming
TEGO Sulpho Release Agent for Sulphur Forming Description of the process The process of pastillizing sulphur The Sandvik Rotoform System ensures an economical and reliable granulation of premium quality
More informationINDUSTRIAL TAPE PRODUCT GUIDE
INDUSTRIAL TAPE PRODUCT GUIDE POLYESTER FILM TAPES Ideal Tape s complete line of pressure-sensitive polyester film tapes are backed by more than 100 years of coating experience. These products are widely
More informationJoint Press Release of BASF, Arsenal and Foosung. BASF acquires Novolyte Technologies. April 26, 2012
Joint Press Release of BASF, Arsenal and Foosung April 26, 2012 BASF acquires Novolyte Technologies BASF becomes global supplier of Lithium Battery Electrolyte formulations Further step to becoming leading
More informationMATERIAL DATA SHEET TECHLITE LIGHT GREY ACOUSTICAL FOAM
TECHLITE Light Grey Acoustical Foam is a light-grey, open-cell foam made of melamine resin. TECHLITE is manufactured in the form of untrimmed blocks with a thin outer skin. The standard dimensions of the
More informationTECHNICAL INFORMATION
5-Layer Hot & Cold Water Piping TECHNICAL INFORMATION POLO-ECOSAN ML 5 POLO-ECOSAN ML 5 THE DEVELOPMENT OF PP-R MULTILAYER TECHNOLOGY A new innovation has now been added to the successful polypropylene
More information