1,2,3... As easy as. Mark 10 Powerline. For Compact Fluorescent Lamps

Transcription

1 s easy as 1,2,3... Mark 10 Powerline immable allasts Listed 704G Philips dvance Mark 10 Powerline immable allasts make converting your existing fixtures easy. For companies looking to make their fixed-output linear compact fluorescent systems more cost effective and sustainable, Mark 10 Powerline ballasts provide an easy solution without the need for additional control leads. Simply replace the ballast, replace the switch and dim the lights. Features Full range continuous dimming (100% light output down to 5%) enefits ompatible with controls from numerous manufacturers using standard Powerline controls Ideal for frequent switching applications such as occupancy sensors and daylight harvesting programmed start operation pplications Ideal for conference rooms, auditoriums, educational facilities, hotels, restaurants, and department stores as well as other new construction or retrofit installations where dimming is desired. ( See page 3 for footnote)

2 immable allasts Mark 10 Powerline allasts For 13-42W T4 Lamps Programmed Start No. of Lamps Input Volts atalog Number Input Power NSI (Watts) Max/Min allast Factor Full Light Output Line TH % urrent (mps) Minimum Starting Temp ( F/ ) FQ18W/G24q - 18W FL Quad Tube Lamp (PL-18W/4P, F18X/4P, F18/E) FTR18W/GX24q - 18W FL Triple Tube Lamp (PL-T18W, F18TX/4P, F18T/E) REZ-1Q18-M2-S 22/7 1.00/ /10 Size REZ-1Q18-M2-L 22/7 1.00/ /10 Size VEZ-1Q18-M2-S 22/7 1.00/ /10 Size VEZ-1Q18-M2-L 22/7 1.00/ /10 Size REZ-2Q18-M2-S 43/ / /10 Size REZ-2Q18-M2-L 43/ / /10 Size VEZ-2Q18-M2-S 43/ / /10 Size VEZ-2Q18-M2-L 43/ / /10 Size FQ26W/G24q - 26W FL Quad Tube Lamp (PL-26W/4P, F26X/4P, F26/E) FTR26W/GX24q - 26W FL Triple Tube Lamp (PL-T26W, F26TX/4P, F26T/E) REZ-1T42-M2-S 31/8 1.00/ /10 Size REZ-1T42-M2-L 31/8 1.00/ /10 Size REZ-1T42-M2-L-K* 31/8 1.00/ /10 Size VEZ-1T42-M2-S 31/8 1.00/ /10 Size VEZ-1T42-M2-L 31/8 1.00/ /10 Size VEZ-1T42-M2-L-K* 31/8 1.00/ /10 Size REZ-2Q26-M2-S 58/ / /10 Size REZ-2Q26-M2-L 58/ / /10 Size REZ-2Q26-M2-L-K* 58/ / /10 Size VEZ-2Q26-M2-S 58/ / /10 Size VEZ-2Q26-M2-L 58/ / /10 Size VEZ-2Q26-M2-L-K* 58/ / /10 Size FTR32W/GX24q - 32W FL Triple Tube Lamp (PL-T32W, F32TX/4P, F32T/E) REZ-1T42-M2-S 38/9 1.00/ /10 Size REZ-1T42-M2-L 38/9 1.00/ /10 Size REZ-1T42-M2-L-K* 38/9 1.00/ /10 Size VEZ-1T42-M2-S 38/9 1.00/ /10 Size VEZ-1T42-M2-L 38/9 1.00/ /10 Size VEZ-1T42-M2-L-K* 38/9 1.00/ /10 Size REZ-2T42-M3-S 76/ / /10 Size REZ-2T42-M3-L 76/ / /10 Size VEZ-2T42-M3-S 76/ / /10 Size VEZ-2T42-M3-L 76/ / /10 Size FTR42W/GX24q - 42W FL Triple Tube Lamp (PL-T42W, F42TX/4P, F42T/E) REZ-1T42-M2-S 49/ / /10 Size REZ-1T42-M2-L 49/ / /10 Size REZ-1T42-M2-L-K* 49/ / /10 Size VEZ-1T42-M2-S 49/ / /10 Size VEZ-1T42-M2-L 49/ / /10 Size VEZ-1T42-M2-L-K* 49/ / /10 Size REZ-2T42-M3-S 98/ / /10 Size REZ-2T42-M3-L 98/ / /10 Size VEZ-2T42-M3-S 98/ / /10 Size VEZ-2T42-M3-L 98/ / /10 Size im. Wiring iagram allasts utilizing poke-in connectors can accept wire gauges from WG Some lamp manufacturers recommend burning in new lamps 100 hours at full light output prior to dimming. onsult lamp manufacturer. * Replacement/Retrofit allast Kits indicated by old Type with suffix -K are available to distributors only.

3 immable allasts Mark 10 Powerline allasts For 57-70W T4 Lamps Programmed Start Max/Min Full Light Output Input Power Line Minimum allast No. of Input NSI TH % urrent Starting Wiring Factor Lamps Volts atalog Number (Watts) (mps) Temp ( F/ ) im. iagram FTR57W/GX24q - 57W FL Triple Tube Lamp (PL-T57W, F57QX/4P, F57T/E) REZ-2T42-M3-S 66/ / /10 Size REZ-2T42-M3-L 66/ / /10 Size VEZ-2T42-M3-S 66/ / /10 Size VEZ-2T42-M3-L 66/ / /10 Size FTR70W/GX24q - 70W FL Triple Tube Lamp (F70QX/4P, F70T/E) REZ-2T42-M3-S 80/ / /10 Size REZ-2T42-M3-L 80/ / /10 Size VEZ-2T42-M3-S 80/ / /10 Size VEZ-2T42-M3-L 80/ / /10 Size allasts utilizing poke-in connectors can accept wire gauges from WG Some lamp manufacturers recommend burning in new lamps 100 hours at full light output prior to dimming. onsult lamp manufacturer. * Replacement/Retrofit allast Kits indicated by old Type with suffix -K are available to distributors only. Mark 10 Powerline allasts For 24-55W FT5 Lamps Programmed Start Max/Min Full Light Output Input Power Line Minimum allast No. of Input NSI TH % urrent Starting Wiring Factor Lamps Volts atalog Number (Watts) (mps) Temp ( F/ ) im. iagram FT24W/2G11-24/27WW Long Twin Tube Lamp (PL-L24W, F27X/RS, FT24L) IEZ /8 1.00/ / IEZ-2S24-53/ / / FT36W/2G11-36/39W Long Twin Tube Lamp (PL-L36W, F39X/RS, FT36L) REZ-1TTS40-S 38/9 1.00/ / VEZ-1TTS40-S 38/9 1.00/ / REZ-2TTS40-S 75/ / / VEZ-2TTS40-S 75/ / / FT40W/2G11/RS - 40W Long Twin Tube Lamp (PL-L40W, F40X, FT40L/RS) REZ-1TTS40-S 43/ / / VEZ-1TTS40-S 42/ / / REZ-2TTS40-S 86/ / / VEZ-2TTS40-S 85/ / / FT55W/2G11-55W Long Twin Tube Lamp (PL-L55W, F55X, FT55L) REZ / / / VEZ / / / REZ-2S54 114/ / / VEZ-2S54 114/ / / allasts utilizing poke-in connectors can accept wire gauges from WG Some lamp manufacturers recommend burning in new lamps 100 hours at full light output prior to dimming. onsult lamp manufacturer.. Restrictions on Hazardous Substances (RoHS) is a European directive (2002/95/E) designed to limit the content of 6 substances [lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (P), and polybrominated diphenyl ethers (PE)] in electrical and electronic products For products used in North merica compliance to RoHS is voluntary and self-certified

4 immable allasts imensions Figure Figure - Includes connectors with no leads Figure 2 - L Figure 2 - S E Figure 3 - L - ual onnector for Input Figure 3 - S E Figure E L S L S

5 immable allasts Wiring iagrams iagram 132 iagram 134 iagram 138 LINE WIRING: (2) QU/TRIPLE LMPS GREEN LUE WHITE LLST YELLOW LK RE IMMER Green Terminal Must e Grounded (1) QU/TRIPLE LMP LUE RE

6 allast Specification Section I - Physical haracteristics 1.1 allast shall be physically interchangeable with standard electromagnetic or standard electronic ballasts where applicable. 1.2 allast shall be available in a plastic/metal can or all metal can construction to meet all plenum requirements. 1.3 allast shall be provided with poke-in wire trap connectors or integral leads color coded per NSI Section II - Performance Requirements 2.1 allast shall be Programmed Start. 2.2 allast shall contain auto restart circuitry in order to restart lamps without resetting power. 2.3 allast shall operate from 60 Hz input source of 120V or 277V or 120V through 277V as applicable with sustained variations of +/- 10% (voltage and frequency). 2.4 allast shall be high frequency electronic type and operate lamps at a frequency above 42 khz to avoid interference with infrared devices and eliminate visible flicker. 2.5 allast shall have a Power Factor greater than 0.98 at full light output. 2.6 allast shall have a minimum ballast factor of 1.00 at maximum light output and 0.05 at minimum light output for primary lamp application. 2.7 allast shall provide for a Lamp urrent rest Factor of 1.7 or less. 2.8 allast input current shall have Total Harmonic istortion (TH) of less than 10% at maximum light output when operated at nominal line voltage with primary lamp. Total Harmonic urrent (TH) at minimum light output shall not exceed TH at maximum light output. 2.9 allast shall have a lass sound rating allast shall have a minimum starting temperature of 10º (50º F) for primary lamp allast shall provide Lamp EOL Protection ircuit for all FL lamps allast shall control lamp light output from 100% - 5% relative light output for FL lamps allast shall ignite the lamps at any light output setting without first going to another output setting allast shall tolerate sustained open circuit and short circuit output conditions. Mark 10 Powerline immable allasts Section III - Regulatory Requirements 3.1 allast shall not contain any Polychlorinated iphenyl (P). 3.2 allast shall be Underwriters Laboratories (UL) listed, lass P and Type 1 Outdoor; and anadian Standards ssociation (S) certified where applicable. 3.3 allast shall comply with NSI ategory for Transient protection. 3.4 allast shall comply with NSI where applicable. 3.5 allast shall comply with the requirements of the Federal ommunications ommission (F) rules and regulations, Title 47 FR part 18, Non-onsumer (lass ) for EMI/RFI (conducted and radiated). 3.6 allast shall comply with NEM 410 for in-rush current limits. Section IV - Other 4.1 allast shall be manufactured in a factory certified to ISO 9001 Quality System Standards. 4.2 allast shall carry a five-year limited warranty from date of manufacture against defects in material or workmanship for operation at a maximum case temperature of Manufacturer shall have a twenty-year history of producing electronic ballasts for the North merican market. 4.4 allast shall be controlled by a compatible Mark 10 Powerline two-wire dimmer. When input voltage to dimmer is 120V, control voltage at the ballast (from the dimmer) shall be 120V at full light output and 56V at minimum light output. When input voltage to dimmer is 277V, control voltage at the ballast (from the dimmer) shall be 277V at full light output and 129V at minimum light output. 4.5 allast shall be Philips dvance part # or approved equal Koninklijke Philips N.V. ll rights reserved. Specifications are subject to change without notice. EL /13 Philips Lighting ompany ivision of Philips North merica W. Higgins Road Rosemont, IL Tel: Fax: uxstomer Support/ustomer are: Philips Lighting ompany ivision of Philips anada 281 Hillmount Road Markham ON, anada L6 2S3 Phone: