FDBT S 32W120V DM Bal

Transcription

1 3804 South Street , TX Nacogdoches Phone: ax: DT430S 3W0V DM al Catalog Number Manufacturer Description Weight per unit Product Category eatures allast actor 0.95 Dimming 00 TO 5 PECENT Input Current 0.3 MPEE Input Voltage 0 V Lamp Style TIPLE TUE Lamp T4 Lamp Wattage 3 W Maximum THD 0 PECENT Minimum Starting Temperature 50 DEG Number of Lamps Power actor 0.95 Starting POGMMED PID Dimensions and Weight Size Descriptions Commodity Description Long Description Product DT430S Compact Se allast, High requency; 00 to 5 Percent Dimming; Programmed apid Start; T4 Lamp; Triple Tube Lamp; Lamp(S); 3 N/ Electronic 4.9 INCH L X 3 INCH W X INCH H Manufacturer Information rand GTIN Manufacturers Part Number D-T43-0--S UPC Taxonomies, Classifications, and Categories HIGH EQUENCY luorescent allasts & ccy - Electronic COMPCT SE LLST, HIGH EQUENCY; 00 TO 5 PECENT DIMMING; POGMMED PID STT; T4 LMP; TIPLE TUE LMP; LMP(S); 3 luorescent Dimming allast

2 3804 South Street , TX Nacogdoches Phone: ax: Packaging Carton Package 4 Weight Per each 0 Uses, Certifications, and Standards pproval UL 935, CS C. requency ating 60 HZ

3 allast Compact SE allast Models CompactSE VOLTS 77 VOLTS Lamp Lamp Watts Lamps per ballast Case allast Current (amps) Compact SE Model Number allast Current (amps) Compact SE Model Number T4 4-Pin Quad-Tube 8 W.0.4 D-T48-0--S D-T48-0--S.08 D-T S D-T S / in. diameter 6 W.6.50 D-T46-0--S D-T46-0--S.. D-T S D-T S T4 4-Pin Triple-Tube 8 W.0.4 D-T48-0--S D-T48-0--S.08 D-T S D-T S / in. diameter 6 W 3 W D-T46-0--S D-T46-0--S D-T43-0--S D-T43-0--S D-T S D-T S D-T S D-T S 4 W D-T44-0--S D-T44-0--S.6.9 D-T S D-T S T5 Twin-Tube 36/39 W (6 in.) D * D * D * D * D * D * 5/8 in. diameter 40 W ( in.) D-7-0-* D-7-0-* D-7-0-3* D-7-77-* D-7-77-* D * 50 W ( in.) D-43-0-* D-43-0-*.3 D * D * Mounting studs standard for T4 ballasts. Delete suffix -S in the model number if mounting studs not needed. * UL certified only SPECIICTION SUMITTL Page 3

4 allast Compact SE Overview CompactSE or designs requiring the energy savings and aesthetic appeal of dimmed T4 compact fluorescent or T5 twin-tube lamps, Compact SE dimming ballasts are your solution. The Compact SE product family includes ballasts for nearly every type of dimmable compact fluorescent lamp. eatures Continuous, flicker-free dimming from 00% to 5% Standard 3-wire line-voltage phase-control technology for consistent fixture-to-fixture dimming performance Models for 4-pin T4 compact lamps and T5 twin-tube lamps Programmed rapid start design will preheat lamp cathodes before applying full arc voltage Lamps turn on to any dimmed level without flashing to full brightness Low harmonic distortion throughout the entire dimming range maintains power quality requency of operation ensures that ballast does not interfere with infrared devices operating between 38 and 4 khz Inrush current limiting circuitry eliminate circuit breaker tripping, switch arcing, and relay failure End-of-lamp-life protection circuitry ensures safe operation throughout entire lamp life cycle Ultra quiet operation Protected from miswires of any input power to control lead, or lamp leads to each other or ground 00% compatible with all 3-wire fluorescent controls 00% performance tested at factory Designed and assembled in the US 5-year limited warranty with field service commissioning (3-year standard warranty) from date of purchase allasts that dim T4 compact fluorescent lamps are intended for factory installation by OEM fixture manufacturer Compact SE, case type 3.00 in. w (76 mm) x.00 in. h (5 mm) x 4.90 in. l (4 mm) Compact SE, case type 3.00 in. w (76 mm) x.00 in. h (5 mm) x 6.75 in. l (7 mm) Compact SE, case type.38 in. w (60 mm) x.50 in. h (38 mm) x 9.50 in. l (4 mm) SPECIICTION SUMITTL Page

5 allast Specifications CompactSE Performance Dimming ange: 00% to 5% measured relative light output (LO) Lamp Starting: programmed rapid start Minimum Lamp Starting Temperature: 0 C (50 ) mbient Temperature Operating ange: 0 C (50 ) to 60 C (40 ) elative Humidity: maximum 90% non-condensing Operating Voltage: 0 V or 77 V at 60Hz Lamp Current Crest actor: less than.7 Lamp licker: none visible Light Output: constant ±% light output for line voltage variations of ±0% Lamp Life: average lamp life meets or exceeds rating of lamp manufacturer allast actor: greater than.95 for T4 quad or triple tube lamps, and greater than.85 for T5 twin-tube lamps Power actor: greater than.95 Total Harmonic Distortion (THD): less than 0% Maximum Inrush Current: 7 amps per ballast at 0 V, 3 amps per ballast at 77 V Sound ating: Inaudible in a 7 da ambient Maximum allast Case Temperature: 75 C (67 ) Standards UL Listed (evaluated to the requirements of UL935) CS certified (evaluated to the requirements of C. No. 74) specific model numbers only Class P thermally protected Meets NSI C8. High requency allast Standard Meets CC Part 8 Non-Consumer for EMI/I emissions requirements T4 compact fluorescent ballasts are MIL Std. 46E compliant (meets the requirements of CE0, E0 and E0) Meets NSI C6.4 Category surge protection standards to 6 kv Manufacturing facilities employ ESD reduction practices that comply with the requirements of NSI/ESD S0.0 Quality Systems registered to ISO 900 SPECIICTION SUMITTL Page