SHORT TERM COURSE ON

Transcription

1 SHORT TERM COURSE ON GAS TURBINE- DEVELOENT, OPERATION AND MAINTENANCE FOR POWER & PROPULSION (GT-DOMPP-2015) Department of Mechanical Engineering MAY 18-22, 2015 SCHEDULE Venue: Seminar Room, Department of Mechanical Engineering Monday, May 18, AM AM AM AM AM AM AM Inaugural Session Expert Lecture I Expert Lecture -II Expert Lecture - III Prof PVM Subbarao /Director/ Shri Sreelal Sreedhar/ Chairman/ Registration Prof PVM Subbarao, IIT Delhi, pmvs@mech.iitd.ac.in Shri Sreelal Sreedhar, Scientist G, Program Director, GTRE, DRDO. sreelal@gtre.drdo.in M.No Prof PVM Subbarao, IIT Delhi. pmvs@mech.iitd.ac.in Inauguration Development of Advanced cycles for power generation gas turbines. Indigenous Aero Engine Project- An evolution of Rotodynamics Technologies Advanced Blades for modern gas turbines. Tuesday, May 19, 2015 Expert Lecture -I Prof Samsher, Director, NIELIT, Inderlok, Delhi, Experimental & Computational studies on gas turbine blade.

2 Phone: Shri J Sudhakar, Group Design and Technological Director, GTRE, DRDO. Challenges Experienced During sreelal@gtre.drdo.in Development of Axial Flow gatet@gtre.drdo.in Turbine I Shri G Shivram Krishna, Technical Challenges Scientist E, GTRE, Experienced in the Design, DRDO. Development and Realization of sreelal@gtre.drdo.in an Aero Gas Turbine Combustor gatet@gtre.drdo.in Expert Lecture-IV Prof Samsher, NIELIT, Inderlok, Delhi, Turbine Blade Cooling. dir_delhi@nielit.gov.in sam6764@yahoo.com Phone: Wednesday, May 20, 2015 Expert Lecture -I Sri H.Sahu, Senior Manager (Design), Mob. No: debashis2207@gmail.com Design advancements, Challenges and Emerging Trends in material, microstructures, aerodynamics, structures, vibration control, cooling

3 methods, thermal barrier coatings Pertaining to the Turbine and Combustors of Russian Origin Aero Gas Turbines Shri Kallol Bhattacharya, Chief Manager (Shops), Mob. No: & Smruti Ranjan Samal, HAL, Koraput, Mob. No: Manufacturing technologies of hot end components specially turbine blades, nozzle guide vanes, vacuum investment casting technologies using equiaxed, directionally solidified and single crystal solidification methods followed by machining techniques I Shri Sisir Patro, DGM, Mob. No: & Smruti Ranjan Samal, HAL Koraput, Mob. No: Expert Lecture-IV Shri M K Gunjan, HAL Koraput, Mob. No: Methods & Technologies of coating on turbine blades and flame tubes of annular combustors. Thermal barrier coating on high pressure turbine blades and other coating techniques on hot end components of Russian Origin Engines Product Qualification and NDT Tests for Certification of Hot End Materials and Components Thursday, May 21, 2015 Expert Lecture-I Shri Santosh Kumar, Senior Technology and Engineering

4 Manager (Shops), HAL, Expert Lecture- III Expert Lecture-IV IMGT. M. No , E_mail: Ashish Anand, Manager (Shop), M.No , ( ). E_mail: Shri K V L Narayan Rao, Manager (Design), HAL, ARDC Shri Prateek Mehrotra, Manager (Design), HAL, ARDC Mr. Partha Nag, AGM. NTPC Challenges During Repair and Servicing of Turbine and Combustor of Gas Turbine Utilized for Offshore and Onshore Industrial installation of ONGC/GAIL Design of Advanced Gas Turbine Combustors Design Challenges Towards High Temperature Turbine - parthanag@ntpc.co.in Friday, May 22, 2015 Expert Lecture-I Shri G Gouda, Group Director (Propulsion), CEMILAC, DRDO, Bangalore M. No Certification procedure of CEMILAC for the industry with regard to combustors and turbines of aero engines during development phases

5 I Valedictory Session Certificate Distribution & Shri G Gouda, Group Director (Propulsion), CEMILAC, DRDO, Bangalore M. No Dr. V Sridhara The General Manager HAL AERDC, DC CV Raman Nagar Bangalore gm.aerdc@halindia.com M. No One expert/director High Tea Engine flame out incidences experienced in Indian Military aviation due to malfunction/failures of combustors and turbines of aero engines Design & Development of Aero- Engine Valedictory session