Manifold Mounted Miniature Cartridge Valves
|
|
|
- Gilbert Warren
- 5 years ago
- Views:
Transcription
1 Manifold Mounted Miniature Cartridge Valves -Way & 3-Way Direct Acting Miniature Cartridge Valves General Description: The manifold mounted miniature Cartridge Valve is offered in twoand three-way models with a stainless steel body. It offers a space-saving approach, with no manifold orifices to machine or press in, since the orifice is integral to the cartridge valve. Ultimately, less machining means lower manifold costs. These cartridge valves come fully assembled with no loose parts the sleeve, plunger, spring and orifice are pressed together as one unit. Installation Valves can be mounted in any position. The preferred orientation is with the coil vertical and upright. Standard Materials of Construction Please refer to page D8. Compatible Fluids Lubricated Gases, Water, Oil (300 SSU) and additional fluids compatible with materials of construction. Use of non-lubricated gaseous media can affect valve life. Electrical Characteristics: Standard Voltages: AC 4/60 0/60 0/50 40/60 0/50 DC, 4 For other voltages consult factory Coil Classification: Class F standard Class H available AC & DC coils are interchangeable on the same pressure vessel. Agency Approvals: Standard valves with NEMA 4X are C-UL-US Listed or Recognized. For additional details, consult factory. Maximum Ambient Temperature 35 F (AC)/5 F (DC) In absence of moisture, applications at temps as low as -0 F are possible. Please refer to page D8 for details. Applications: Analyzers and diagnostic equipment Medical and dental equipment Beverage dispensing and vending machines Humidification and misting equipment Pneumatic positioning Automatic dispensing equipment Irrigation equipment Instrumentation panels Lubrication equipment Refrigerant reclaim Automotive diagnostics/service ( 800 Valve05) D3
2 -Way Small Direct Acting - Normally Closed - Stainless Steel NPT Orifice in. Flow Factor Operating Differential Min. Gas Water Oil Watt Vessel Number Coil Valve AC TECHNICAL SPECIFICATIONS CONTINUED /8 3/ FKM 09CL5EV4 9 D /8 / FKM 09CL5GV4 9 D /8 5/ FKM 09CL5JV4 9 D /8 3/ FKM 09CL5LV4 9 D /8 7/ FKM 09CL5MV4 9 D /8 / FKM 09CL5PV4 9 D /8 5/ FKM 09CL5QV4 9 D DC TECHNICAL SPECIFICATIONS CONTINUED /8 3/ FKM 09CL5EV4 9 D /8 / FKM 09CL5GV4 9 D /8 5/ FKM 09CL5JV4 9 D /8 3/ FKM 09CL5LV4 9 D /8 7/ FKM 09CL5MV4 9 D /8 / FKM 09CL5PV4 9 D /8 5/ FKM 09CL5QV4 9 D -Way Small Direct Acting - Normally Open - Stainless Steel NPT Orifice in. Flow Factor Operating Differential Min. Gas Water Oil Watt Vessel Number Coil Valve AC TECHNICAL SPECIFICATIONS CONTINUED /8 / FKM 09FL5AV4 9 D /8 3/ FKM 09FL5EV4 9 D /8 / FKM 09FL5GV4 9 D /8 5/ FKM 09FL5JV4 9 D /8 3/ FKM 09FL5LV4 9 D DC TECHNICAL SPECIFICATIONS CONTINUED /8 / FKM 09FL5AV4 9 D /8 3/ FKM 09FL5EV4 9 D /8 / FKM 09FL5GV4 9 D /8 5/ FKM 09FL5JV4 9 D /8 3/ FKM 09FL5LV4 9 D D ( 800 Valve05)
3 3-Way Small Direct Acting - Normally Closed - Stainless Steel Orifice In. Flow Factor NPT In Exh. In Exh. Min. AC TECHNICAL SPECIFICATIONS Operating Differential Gas Water Oil Watt Vessel Number Coil Valve /8 /3 / FKM 309CL5AV4 9 D /8 3/64 3/ FKM 309CL5EV4 9 D /8 /6 / FKM 309CL5GV4 9 D /8 5/64 5/ FKM 309CL5JV4 9 D /8 3/3 3/ FKM 309CL5LV4 9 D /8 7/64 3/ FKM 309CL5MV4 9 D /8 /8 3/ FKM 309CL5PV4 9 D /8 5/3 3/ FKM 309CL5QV4 9 D DC TECHNICAL SPECIFICATIONS /8 /3 / FKM 309CL5AV4 9 D /8 3/64 3/ FKM 309CL5EV4 9 D /8 /6 / FKM 309CL5GV4 9 D /8 5/64 5/ FKM 309CL5JV4 9 D /8 3/3 3/ FKM 309CL5LV4 9 D /8 7/64 3/ FKM 309CL5MV4 9 D /8 /8 3/ FKM 309CL5PV4 9 D /8 5/3 3/ FKM 309CL5QV4 9 D 3-Way Small Direct Acting - Normally Open - Stainless Steel Orifice In. Flow Factor NPT In Exh. In Exh. Min. AC TECHNICAL SPECIFICATIONS Operating Differential Gas Water Oil Watt Vessel Number Coil Valve /8 /3 / FKM 309FL5AV4 9 D /8 3/64 3/ FKM 309FL5EV4 9 D /8 /6 / FKM 309FL5GV4 9 D /8 5/64 5/ FKM 309FL5JV4 9 D /8 3/3 3/ FKM 309FL5LV4 9 D DC TECHNICAL SPECIFICATIONS /8 /3 / FKM 309FL5AV4 9 D /8 3/64 3/ FKM 309FL5EV4 9 D /8 /6 / FKM 309FL5GV4 9 D /8 5/64 5/ FKM 309FL5JV4 9 D /8 3/3 3/ FKM 309FL5LV4 9 D ( 800 Valve05) D5
4 3-Way Small Direct Acting - Universal - Stainless Steel Orifice In. Flow Factor NPT In Exh. In Exh. Min. AC TECHNICAL SPECIFICATIONS Operating Differential Gas Water Oil Watt Vessel Number Coil Valve /8 /3 / FKM 309UL5AV /8 3/64 3/ FKM 309UL5EV /8 /6 / FKM 309UL5GV /8 5/64 5/ FKM 309UL5JV /8 3/3 3/ FKM 309UL5LV /8 7/64 3/ FKM 309UL5MV /8 /8 3/ FKM 309UL5PV /8 5/3 3/ FKM 309UL5QV DC TECHNICAL SPECIFICATIONS /8 /3 / FKM 309UL5AV /8 3/64 3/ FKM 309UL5EV /8 /6 / FKM 309UL5GV /8 5/64 5/ FKM 309UL5JV /8 3/3 3/ FKM 309UL5LV /8 7/64 3/ FKM 309UL5MV /8 /8 3/ FKM 309UL5PV /8 5/3 3/ FKM 309UL5QV Arrangement -Way normally closed -Way normally open Arrangement 3-Way normally closed 3-Way normally open 3-Way universal over seat body flow over seat body flow common under seat body flow sleeve under seat body flow exhaust NC sleeve 3 exhaust 3 3 NO Product Features: Space saving approach Less manifold machining means lower manifold cost No manifold orifices to machine or press in Cartridge valves are 00% tested Easy to assemble and disassemble with a 5/3" hex wrench to a torque of 5-35 in-lbs. Available with all coil options from Chart 9 in coil section. D ( 800 Valve05)
5 Valve D 5/3 HEX -Way Normally Closed (09CLxx).94 3/4-4 UNS-A TH'D.54 WAY NORMALLY CLOSED Manifold cavity for 3/4-4 UNS-B thread per VMR-046 (See page D8) Valve D B.65 PORT 3 3/4" HEX Way Normally Open (09FLxx) 3-Way Normally Closed (309CLxx) 3-Way Normally Open (309FLxx) 3-Way Universal (309ULxx).54 PORT 4 PLC'S.74 PORT Manifold cavity for 3/4-4 UNS-B thread per VMR-046 (See page D8) 3/4-4 UNS-A TH'D. ALL DIMENSIONS REFERENCE ONLY. MANIFOLD CAVITY FOR 3/4-4 UNS-B THREAD PER VMR REF VALVE NUMBERS 09XL5XX4B4X & 309XL5XX4B4X ( 800 Valve05) D7
6 -Way Miniature Direct Acting Cartridge Mounted Valve Materials of Construction** Product* Wattage Type Body Tube Stop Flange "Plunger Blank" Plunger Spring Shading Ring Ambient 09CL5 8.5 (AC) WNC - 303SS 304SS 430FR 430FR 430FR 8-8SS Copper 35 F 09CL5 8 (DC) WNC - 303SS 304SS 430FR 430FR 430FR 8-8SS Copper 5 F 09FL5 0 (AC) WNC /8 303SS 304SS 430FR 430FR 430FR 8-8SS Copper 35 F 09FL5 8 (DC) WNC /8 303SS 304SS 430FR 430FR 430FR 8-8SS Copper 5 F * Shows the first 6 digits of the pressure vessel part number. ** Maximum ambient temperature shown is the rating when valve is operating at the maximum fluid temperature as shown in the product sections for each of the valves in this catalog. 3-Way Miniature Direct Acting Cartridge Mounted Valve Materials of Construction** Product* Watt Type Body Tube Stop Flange "Plunger Blank" Plunger Spring Shading Ring Ambient 309CL5 0 (AC) 3WNC /8 303SS 304SS 430FR 430FR 430FR 8-8SS Copper 35 F 309CL5 8 (DC) 3WNC /8 303SS 304SS 430FR 430FR 430FR 8-8SS Copper 5 F 309FL5 0 (AC) 3WNO /8 303SS 304SS 430FR 430FR 430FR 8-8SS Copper 35 F 309FL5 8 (DC) 3WNO /8 303SS 304SS 430FR 430FR 430FR 8-8SS Copper 5 F 309UL5 0 (AC) 3WU /8 303SS 304SS 430FR 430FR 430FR 8-8SS Copper 35 F 309UL5 8 (DC) 3WU /8 303SS 304SS 430FR 430FR 430FR 8-8SS Copper 5 F * Shows the first 6 digits of the pressure vessel part number. ** Maximum ambient temperature shown is the rating when valve is operating at the maximum fluid temperature as shown in the product sections for each of the valves in this catalog. VMR-046 A Cavity Dimensional Drawing.550 MIN R.00 MAX.75 MIN TH'D DEPTH.359 R DETAIL B SCALE 4 : 3/4-4 UNS-B TH'D TO DEPTH SHOWN A E n.70 MINOR DIA REF n.768 `.00 C.085 TO INT D C D 5 Ø.56 DR MAX n.5 DR PLC'S 5 DEPTH OF.56 DR DEPENDS ON MANIFOLD DESIGN FOR PORT #. (UNDER SEAT) 63 A MACHINED SURFACE OF IS ACCEPTABLE IF THE MACHINED 4 SURFACE HAS A CIRCULAR LAY. B 3. MANIFOLD MOUNT VALVE MUST BE IDENTIFIED WITH A LABEL WITH VMR-046 REV X. 4 3 B SECTION A-A SCALE : 60 n.354 n.33` DETAIL C SCALE 4 : D DEPTH OF.5 DR DEPENDS ON MANIFOLD DESIGN FOR PORT. (OVER SEAT) DIAMETER AND SURFACE FINISH MUST BE MAINTAINED TO DEPTH SHOWN. Warning: Please contact factory for the latest version of this cavity drawing before proceeding with any manifold machining. D ( 800 Valve05)
Valve Reference C5. Valve Reference C6. 4-Way. 4-way direct acting
Valve Reference C5.86 3.25.53 1.31 1.62 E 3.25 4.31 2.37 2.56 1.73 2.24 P 1/4 Thru Bolt Holes 4 PLC s 2.69 4-way direct acting V933xx: Normally Closed-Normally Closed v935xx: Normally Closed-Normally Open
Goldring Ventil BG 30
Hydraulik - Pneumatik Steffen Haupt Moritzer Straße 189 Riesa Telefon: 2 681- Telefax: 2 6812 info@haupt-hydraulik.de Goldring Ventil BG Fluid Control for Food & Beverage Broschuere 24,29,4,9 mai 28 KATALOG
3-Way. Direct Acting & Pilot Operated Quick Exhaust Valves 1/4" - 3/8" NPT. General Description: Applications: Electrical Characteristics:
Direct Acting & Pilot Operated Quick Exhaust Valves 1/4" - 3/8" General Description: Direct Acting & Pilot Operated Quick Exhaust Valves are designed to provide a large orifice for quick exhaust. Increased
DE- OUT OUT DE- OUT OUT DE- SERIES MODEL E21 2-WAY NORMALLY OPEN CONDUIT HOUSG (700) 235 (0) 1 (3) (1) (700) 235 (0) 1 (3) (1) E21G7XC
SPECIFICATIONS 2-WAY 3-WAY EXPLOSION PROOF VALVES OPERATG CONDITIONS Media: Air, water, and other fluids, compatible with standard Buna seals. Hot water, steam, gasoline, and many oils require special
Series 1, 2 & 6 Options selector. Port 4 = 1/8" NPT 5 = 1/4" NPT (Series 6* only) 7 = #10-32 UNF 8 = 1/4-28 UNF
KIP Isolation Valves Ideal for control of corrosive and aggressive media Elastomer diaphragm provides protection from aggressive, corrosive, and gritty media Isolation valves can be equipped with a low
Solenoid Valves Section. Level Controls & Flow Switches Section. 7/99 Littleton, CO USA Phone Fax
NCA-53 July 1999 Solenoid Valves Section How to Use This Catalog.........................3 Valve Overview Valve Styles................................4-5 Capabilities..................................6
2-Way/2 Position Valves
4 2-Way/2 Position Valves Two-way solenoid valves have one inlet and one outlet, and are used to permit and shut off fluid flow. Two Types of Operations Apply Normally Closed (NC) Fluid is shut off when
3 Way/2 Position Valves
Way/ Position Valves Three way valves have three pipe connections and two orifices. When one orifice is open, the other is closed, and vice versa. They are commonly used to alternately apply pressure to
2/2 ^ % ) Normally Closed or Normally Open Hot Water and Steam Valves. Brass or Stainless Steel Bodies 1/8" to 2 1/2" NPT
Normally Closed or Normally Open Hot Water and Valves Brass or Stainless Steel Bodies 1/8" to 2 1/2" NPT 2/2 Features Handle the challenges of high-temperature fluids PTFE and EPDM discs, stainless steel
High Pressure Solenoid Valves
High Pressure Solenoid Valves Available for Quick Delivery Controls the flow of Gases & Liquids up to 15,000 PSIG Natural Gas, Hydrogen & other High Pressure Gases High Pressure Cryogenics Flammable Liquids
% ^ ) 4/2 SERIES. Direct Mount. Direct Acting Direct Mount Pilot Valves. Brass or Stainless Steel Bodies 1/4" NPT. Features. Construction.
Direct Acting Direct Mount Pilot Valves Brass or Stainless Steel Bodies /" NPT / 83 Direct Mount Features NAMUR direct mount version of the rugged, dependable 83 Series valves Direct acting, high flow
Solenoid Valves & Accessories. Incorporating Solenoid Valves in. Custom Products. Solenoid Operated. Custom Products
PNEUMADYNE, INC. Catalog 24 Phone 763-559-177 Fax 763-559-547 Incorporating Solenoid Valves in Custom Products For over 3 years, manufacturers have relied on Pneumadyne for innovative solutions to their
4 qwer 2/2. Pilot Operated General Service Solenoid Valves. Brass or Stainless Steel Bodies 3/8" to 2 1/2" NPT. Features. Construction.
4 qwer Pilot Operated General Service Solenoid Valves Brass or Stainless Steel Bodies 3/8" to 2 1/2" NPT NC NO 2/2 SERIES Features Wide range of pressure ratings, sizes, and resilient materials provide
Series 810: 2 Way Angle Body Valves: 1/4 to 3 NPT
Series 810: 2 Way Angle Body Valves: 1/4 to 3 NPT FEATURES Compact design, high fl ow rates Visual position indicator standard For temperatures from 22 F to +430 F / -30 C to 221 C Working pressures up
Control & Power, Inc
Way/ 2 and 3 Position Four ported valves are generally used to operate double-acting cylinders or actuators. They have four or five pipe connections, commonly called ports: One pressure inlet. Two cylinder
Performance Data. Temperature Range. -20 o to 160 o F 26 Hg to 125 psi. C v Flow Rate (scfm) Fill Time Exhaust. Port.
Control Valves & Valve Accessories PNEUMADYNE, INC. Catalog 00 Phone 76-559-077 Fax 76-559-0547 Features Single stem design Compact size Four input options Numerous porting configurations Fully ported
How to order (see coil section for part numbering charts)
How to order (see coil section for part numbering charts) Valves using Coil Charts 1-6 (Gold Ring Series Valves) Step 1: Select the pressure vessel catalog number based on the application requirements.
MINIATURE SOLENOID GENERAL SERVICE VALVES
MINIATURE SOLENOID GENERAL SERVICE VALVES SERIES The Series solenoid valves are designed for use with air and inert gases Highly customizable construction that is suitable for a wide variety of gas applications
3/2-way Rocker Solenoid Valve for pneumatic systems
3/-way Rocker Solenoid Valve for pneumatic systems EEx ia versions Direct-acting High cycling rate Reduced power consumption Type 6104 can be combined with... Sub-base connection Approvals: Type 654 Servo-assisted
Multi Way Valves for Pneumatics Servo Assisted, Extendable, 10mm Wide
Multi Way Valves for Pneumatics Servo Assisted, Extendable, 10mm Wide 3/2 and 5/2 Way Valves Optimum system solutions due to high level of modularity Maintenance free and little wear due to high level
(Accessory, see ordering info) Wetted Materials
Series LX-Valve 8 mm Latching Solenoid Valve Typical Markets Portable Medical Equipment Environmental Monitoring Typical Applications Air & Oxygen Delivery Miniature Latching Pneumatic Solenoid Valve The
SKINNER Intrinsically Safe Series Four-Way
SKINNER Four-Way Two-Position Valves SPECIFICATIONS Mechanical Characteristics Standard Materials of Body Aluminum Seals FKM, NBR. Other diaphragm materials available upon request. Compatible Fluids Air
4 qwer. Steam and Hot Water Valves 2/2 SERIES. Hot Water/ Steam. Features. Construction. Nominal Ambient Temperature Ranges: Electrical.
qwer Normally Closed or Normally Open and Hot Water Valves Brass or Stainless Steel Bodies 1/8" to 2 1/2" NPT NC NO 2/2 SERIES Features Handle the challenges of high-temperature fluids. PTFE and EPDM discs,
Direct-acting 2/2-way plunger valve
Direct-acting 2/2-way plunger valve Type can be combined with Direct-acting and compact valve up to diameter of DN 6.0 Vibration-proof, bolted coil system Increased leak-tightness with welded plunger guiding
Control Valves & Valve Accessories
Control Valves & Valve Accessories PNEUMADYNE, INC. Catalog 400 Phone 76-559-077 Fax 76-559-0547 Stainless Steel 0- Fully Ported valve with M5 threads available- contact factory Viton is a registered trademark
2/2 or 3/2-way Solenoid Valve, with pivoted armature and isolating diaphragm
/ or 3/-way Solenoid Valve, with pivoted armature and isolating diaphragm Type 0330 can be combined with Lockable manual override as standard For liquid, gaseous and aggressive media Long service life,
3/2-way Solenoid Valve, direct-acting, NC or NO
3/2-way Solenoid Valve, direct-acting, NC or NO Electrical connection cable plug, Form A With or without manual override as standard Threaded port and sub-base s Impulse optional Type 6014 can be combined
Low Power. 1.4 W Low Power Solenoid Valves. Brass or Stainless Steel Bodies 1/4" to 1" NPT. Features
.4 W Solenoid Valves Brass or Stainless Steel Bodies /4" to " NPT 4/ Features Moulded one-piece solenoid with highly efficient solenoid cartridge and special low wattage coil Designed for use in automation
/2. Hot Water and Steam Valves Brass or Stainless Steel Bodies 1/8" to 2 1/2" NPT ^ % )
888-87-6711 Normally Closed or Normally Open ot Water and Valves Brass or Stainless Steel Bodies 1/8" to 2 1/2" NPT Features ot water service to 210 psi differential @ 210 F; sevice to 125 psi differential
3/2-way Small Solenoid Valve, G 1/8 - G 1/4 and sub-base
3/2-way Small Solenoid Valve, G 1/8 - G 1/4 and sub-base Sub-base Direct-acting, normally closed and normally open Brass and stainless steel body Electrical cable plug Form A With or without manual override
3/2-way Miniature Rocker Solenoid Valve for pneumatic systems
66 /2-way Miniature Rocker Solenoid Valve for pneumatic systems Direct-acting High cycling rate Reduced power consumption CNOMO and Bürkert flange interface Type 66 can be combined with TEX Ex ia on request
Miniature Pneumatic Solenoid Valve. Power: 0.5 Watt & 1.0 Watt. Not all power options are available in all models, see ordering info.
8 Ten-X 10 mm Normally Open/Closed Solenoid Valve Typical Applications Portable medical equipment Patient monitors Wound therapy Blood Pressure Monitoring Dialysis Product Specifications Mechanical Valve
3/2-way Miniature Rocker Solenoid Valve for pneumatic systems
66 /2-way Miniature Rocker Solenoid Valve for pneumatic systems Direct-acting High cycling rate Reduced power consumption CNOMO and Bürkert flange interface Type 66 can be combined with TEX Ex ia on request
4 N E X T G E N E R A T I O N
N X T G N R A T I O N lectronically nhanced Solenoid Valves and Stainless Steel Bodies /" - " NPT / 3/ / SRIS Next Generation Features Increase in DC pressure ratings to AC levels on all products (up to
Proveedor Integral de Soluciones para la Industria. Desde1963
Proveedor Integral de Soluciones para la Industria Desde1963 4 Vías uso general ASCO cuenta con la más amplia gama de válvulas solenoides de usos generales, en 2, 3, 4, y 5 vías, para el manejo de fluidos
Refrigeration Solenoid Valves & 3-Way Heat Reclaim Valves
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Refrigeration Solenoid s & 3-Way Heat Reclaim s Catalog D-1, May 2010
2/2-way Solenoid Valve for liquids and gases
2/2-way Solenoid Valve for liquids and gases Type 6213EV can be combined with... Coupled spring diaphragm system opened without differential pressure Waterhammer free and low noise HP00 version with increased
The manifolds can be powered through various fieldbus systems, multipole or common terminals.
Servo-Assisted, Modular, 8mm Wide / and 4/ Multi-Way Valves; Servo Assisted; Flow Rate: 0.6 ft /min.; /8 NPT and /4 O.D. Legris Connections Advantages / Benefits Optimum system solutions due to high level
Data sheet. Solenoid valves 2/2-way direct-operated Type EV210B. February 2002 DKACV.PD.200.A B1504
Data sheet Solenoid valves 2/2-way direct-operated Type EV210B February 2002 DKACV.PD.200.A5.02 520B1504 closed Type EV210B NC for neutral liquids and gases DN 1.5-25 B - G1 Features Technical data 1 )
Maximum Line Resistance vs. Length of Wire Max. Loop Resistance. Max. Wire Run 18AWG 7x26 Stranded (ft)
. W Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies /" to " NPT / 3/ / 5/ 5/3 Features Molded one-piece solenoid with highly efficient solenoid cartridge and special low wattage coil Increased
2/2-way Miniature Solenoid Valve
2/2-way Miniature Solenoid Valve Direct-acting can be combined with... 0... 21 bar DN 1.2... 2.4 mm M5, G1/8 and sub-base 21 mm coil spacing when mounted on manifold Type 2506 Cable plug to DIN EN 175301-803*
Solenoid Valves Solenoid Valves For All Your Applications KIP is proud to offer a complete line of solenoid valves, manifold assemblies, and custom va
Contents How to Use This Catalog......................... 3 Valve Overview Valve Styles................................. 4-5 Capabilities................................... 6 Solenoid Selection Chart.........................
2/2 or 3/2-way Miniature Rocker Solenoid Valve
2/2 or 3/2-way Miniature Rocker Solenoid Valve Type 0127 can be combined with... For maximum chemical resistance requirements Compact design with mm width and Cv ratings up to 0.08 Proven reliability since
Technical Data Sheet
Technical Data Sheet Type 52 2/2-way solenoid valve NC - Valve normally closed (as standard) NO - Valve normally open (as option) Direct operated piston design valve. No differential pressure is necessary
Engineering Information. Solenoid Valves Principles of Operation. Solenoid Valves. Direct Acting Valves (Figures 1A, 1B)
4 Engineering Information Principles of Operation A solenoid valve is a combination of two basic functional units: A solenoid (electromagnet) with its core A valve body containing one or more orifices
Direct-acting 3/2 way plunger valve
Direct-acting 3/2 way plunger valve Direct-acting, compact valve with diameter of up to DN 2.5 Vibration-proof, bolted coil system Banjo threaded connection for direct mounting on pneumatic valves Type
Voltage. Common Marking. Outlet Port Size. A S1, S2, S6 2WNC 1/8"NPT IN 1/8"NPT OUT Common in, individual out
Manifolds Standard Manifold It s easy to order your own standard KIP Series Manifold assembly using the simple selection chart below. First, select the manifold mount valve or valve operator from the part
2/2-way Solenoid Valve with servo diaphragm, G 3/8 - G 2
2/2-way Solenoid Valve with servo diaphragm, G 3/8 - G 2 Type 6281 can be combined with... User friendly - one solenoid for all orifices Waterhammer free and low noise NC or NO Manual override optional
Common wiring modules can be connected by fieldbus, multi-pole or common earth/neutral modules.
/ and 4/ multi-way valves; servo assisted; DN 4; flow rate: l/min.; /8, legris ø 6 mm port connections Advantages / Benefits Optimised system solutions due to high level of modularity Compact design with
2/2 3/2 4/2 SERIES Air Operated. General Service Air Operated Valves. Brass Body 1/4" to 2" NPT. Features. Construction.
General Service Valves Brass Body 1/" to 2" NPT 2/2 3/2 /2 Features Unique sealing member isolates pilot air pressure from mainline fluid Variations in pilot air pressure do not affect valve operation
S21 Series. - 1" NPT - Brass Body - 2-Way Piloted Diaphragm - Normally Open. Dimensions/Weight
S21 Series - 1" NT - Brass Body - 2-Way iloted Diaphragm - s Seals: Nitrile, Viton, Ethylene ropylene Orifice: ilot Stainless Steel Main Brass Ø 1 Electrical Standard Housing: Encapsulated Waterproof Conduit
SOLENOID VALVES pilot operated for hot water/steam applications 3/8 to 1
SOLENOID VALVES pilot operated for hot water/steam applications 3/8 to 1 NC 2/2 Series 220 FEATURES Small compact d valves particularly designed for hot water and steam, compatible with the seal materials
Valves, Fittings, and Manifolds Catalog. We make things MOVE
Valves, Fittings, and Manifolds Catalog We make things MOVE We Make Things Move A forward-thinking innovator, Bimba provides industry-leading pneumatic, hydraulic and electric motion solutions that are
The extendable type 5470 EExi can be used for block modules or for entire valve blocks (tag connectors on top, coil spacing 19 mm).
/2- and 4/2-multi-way valves ; servo-assisted; block assembly or NAMUR flange; DN 4; flow rate: 00 l/min Advantages / Benefits II 2G EEx ia IIC T6 PTB0 ATEX 275 approved Available for block assembly and
Solenoid valves 3/2-way direct-operated Type EV310A
Solenoid valves /-way direct-operated Type EV10A Features EV10A NC and NO Very compact valves for industrial application, such as control. For water, oil, compressed air and similar neutral media. Ambient
2/2-way Compact Solenoid Valve, G 1/4 - G 1/2
2/2-way Compact Solenoid Valve, G 1/4 - G 1/2 Stainless steel body Type 6027 Compact can be combined with Direct-acting, normally closed Brass and stainless steel body Electrical connection cable plug
S21 Series. - 2" NPT - Brass Body - 2-Way Piloted Diaphragm - Normally Open. Dimensions/Weight
S21 Series - 2" NT - Brass Body - 2-Way iloted Diaphragm - s Seals: Nitrile, Viton, Ethylene ropylene Orifice: ilot Stainless Steel Main Brass Ø 1 1/4 Electrical Standard Housing: Encapsulated Waterproof
ASCO Stainless Steel Spool Valves Manually Operated and Main Supply Reset Valves
ASCO Stainless Steel Spool Valves Manually Operated and Main Supply Reset Valves Pilot Operated 316L Stainless Steel Bodies 1/4" NPT 3/2 Features Ideal for oil and gas control panel applications Drop-in
Pneutronics. Miniature Proportional Valves. Catalog PND-MPV-001/US January 2007
Pneutronics Miniature Proportional Valves January 2007 Non-Thermally Compensated Proportional Valve HF 200 Miniature Ultra High Flow Proportional Valve HF 200 is a high flow proportional valve that provides
2/2 or 3/2 way direct acting rocker solenoid valve
2/2 or 3/2 way direct acting rocker solenoid valve With isolating diaphragm Ultra low dead volume Type 6126 can be combined with... High back-pressure tightness Normally closed, normally open or universal
Solenoid Valves Catalogue
Solenoid Valves Catalogue lcon Solenoid Valve Range US Keeping the World Flowing Contents Section Page Section Page Introduction 3 U Series 4 U Series Exd 6 U3/U33 Series 8 U3/U33 Series Exd 0 68 Series
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment FAST SHIPPING AND DELIVERY TENS OF THOUSANDS OF IN-STOCK ITEMS EQUIPMENT DEMOS HUNDREDS OF MANUFACTURERS SUPPORTED
Miniature and Subminiature Solenoid Valves
Miniature and Subminiature Solenoid Valves Gems specializes in made-to-order fluidic systems, and a major segment of that activity includes the integration of miniature solenoid valves and manifold assemblies.
Information 3 Form A 4 Industrial Form Type B 12 Form B 16 Form C 18 Micro Type C 22
TABLE OF CONTENTS Connectors Information 3 Form A 4 Industrial Form Type B 12 Form B 16 Form C 18 Micro Type C 22 Function Fittings Information 26 Flow Controls 27 Pilot Operated Check Valves 28 Pressure
Table of Contents. Page. See Catalog and Product Updates on our Website
2 Table of Contents Page Sapphire Orifice Assemblies... 3-5 Metal Orifice Assemblies - Barb Connections... 6-7 Metal Orifice Assemblies - NPT Connections... 8-9 Metal Orifice Assemblies - Inserts... 10-13
Nessie 2/2 way Solenoid valves for High Pressures and High Temperatures, type VDHT
Nessie 2/2 way Solenoid valves for High Pressures and High Temperatures, type VDHT Valve program for small and medium flows: VDHT 3/8 E 2/2 VDHT 1/2 E 2/2 VDHT 3/8 EA 2/2 VDHT 1/2 EA 2/2 Valve program
Poppet Valves Series. Keeping the World Flowing
Poppet Valves 750 Series Keeping the World Flowing Contents Section Page Introduction 750 Series Poppet Valve Pilot operated 4 /4 to / Pilot operated 5 /4 to Pilot operated 6 Pilot operated 7 /4 to / Pilot
Gold Ring Two -Way, Three-Way and Four-Way Solenoid Valves. Catalog 7300A
Gold Ring Two -Way, Three-Way and Four-Way Solenoid Valves Catalog 7300A Table of Contents Introduction Product Overview...1 Condensed Valve Listing... 2-9 Valve Ordering Information...10-12 Gold Ring
Miniature and Subminiature Solenoid Valves
Miniature and Subminiature Solenoid Valves Gems specializes in made-to-order fluidic systems, and a major segment of that activity includes the integration of miniature solenoid valves and manifold assemblies.
2/2-way Solenoid Valve with servo diaphragm, G 3/8 - G 2
2/2-way Solenoid Valve with servo diaphragm, G 3/8 - G 2 Type 6281 can be combined with... User friendly - one solenoid for all orifices Waterhammer free and low noise NC or NO Manual override optional
4 qwer. Air Operated Valves 2/2 3/2 4/2 SERIES. Air Operated. General Service. Brass or Stainless Steel Bodies 1/4" to 2" NPT. Features.
qwer General Service Valves Brass or Stainless Steel Bodies 1/" to 2" NPT 2/2 3/2 /2 SERIES Features Unique sealing member isolates pilot air pressure from mainline fluid. Variations in pilot air pressure
/ 3/ 4/ 5/ 5/3 4 Nominal Ambient Temp. Ranges Series Body Material Normal Temperature Range High Ambient Temp Version 8553 Stainless Steel -4 F to 4 F
4.4 W Solenoid Valves Aluminum, Brass, or Stainless Steel Bodies /4" to " NPT / 3/ 4/ 5/ 5/3 Features Molded one-piece solenoid with highly efficient solenoid cartridge and special low wattage coil Increased
3/2-way and 2 x 3/2-way Solenoid Valve for pneumatics
654 3/-way and x 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Fast response times Space saving ( x 3/-way version) Type 654 can be combined with...
2/2 and 3/2-way Flipper Solenoid Valve, with hermetic isolation of fluid
2/2 and 3/2-way Flipper Solenoid Valve, with hermetic isolation of fluid Low internal volume Low power consumption High back pressure tightness Optional impulse model Type 6124 can be combined with...
16mm miniature rocker solenoid valve with isolating diaphragm for special applications
16mm miniature rocker solenoid valve with isolating diaphragm for special applications 2/2 and 3/2 way, and manifold mount Insensitive to contamination High pressure & back pressure rating of 145 PSI Low
Technical Data... 3 How to Order... 4 Dimensions... 5 Inline Mount Valve... 6 Manifold Dimensions and Part Numbers... 6
Table of Contents Minature Valve Series...3-14 RB Series...3-6 Technical Data.... 3 How to Order.... 4 Dimensions... 5 Inline Mount Valve.... 6 Manifold Dimensions and Part Numbers... 6 S Series...7-9
Pressure Sensor No Series
Sales Manual Section 335 PRODUCT SPECIFICATION 84372 SERIES Pressure Sensor No. 84372-Series GENERAL DESCRIPTION The patented* No. 84372-Series Pressure Sensor contains a weatherproof, snap-acting valve
188 Dimensions: Inches [mm] In-line Version Solenoid valves assembled to manifolds ( Normally closed, orifice only. onsult ASO for alternative c
![188 Dimensions: Inches [mm] In-line Version Solenoid valves assembled to manifolds ( Normally closed, orifice only. onsult ASO for alternative c](/thumbs/73/69194897.jpg "188 Dimensions: Inches [mm] In-line Version Solenoid valves assembled to manifolds ( Normally closed, orifice only. onsult ASO for alternative c")
The 188 is a 3 Way, 10 mm wide micro solenoid valve designed to be used in fluid power applications. Using air or other neutral gasses the 188 can be used to pilot other valves or cylinders. ompact manifold
MAKING MODERN LIVING POSSIBLE. Solenoid valves, 2/2-way assisted lift operated type EV251B Technical brochure
MAKING MODERN LIVING POSSIBLE Solenoid valves, 2/2-way assisted lift operated type EV251B 10-22 Technical brochure Technical brochure Solenoid valves 2/2 way assisted lift operated, type EV251B 10-22 Contents
EVP SERIES PROPORTIONAL CONTROL VALVES
EVP SERIES PROPORTIONAL CONTROL VALVES 207 Clippard is pleased to add the EVP series proportional control valve to our electronic product line. This product combines the features of the existing EV series
2/2-way Solenoid Valve with servo diaphragm
2/2-way Solenoid Valve with servo diaphragm Type 5282 can be combined with... Pivoted armature pilot drive with manual override Magnetic drive completely isolated from fluid by diaphragm Circuit function
PF6 Stainless Steel Piston Actuated On/Off Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Sinclair Collins. Process Control Valves. For Steam, Hot and Cold Liquids -40 to 450 F up to 500 psi. Catalog SCV-100/USA April 2001
Sinclair Collins Process Control Valves For Steam, Hot and Cold Liquids -40 to 450 F up to 500 psi April 2001 The Diaphragm Operated Valves on the following pages are designed for directing, diverting
Proveedor Integral de Soluciones para la Industria
Desde96 Proveedor Integral de Soluciones para la Industria Vías uso general ASCO cuenta con la más amplia gama de válvulas solenoides de usos generales, en,, 4, y 5 vías, para el manejo de fluidos tales
Miniature Pneumatic Solenoid Valve
10 mm Solenoid-Actuated Poppet Valve Typical Markets Respiratory Patient Therapy Typical Applications Oxygen Concentrators - Sieve bed switching/equalization - Oxygen delivery Deep Vein Thrombosis - Cuff
2/2 or 3/2-way Solenoid Valve, with pivoted armature and isolating diaphragm
2/2 or 3/2-way Solenoid Valve, with pivoted armature and isolating diaphragm Lockable manual override as standard For liquid, gaseous and aggressive media Long service life, even in non-lube conditions
4 qwer. Main Pulse Valves Dust Collector 2/2 SERIES H OME PAGE P RINT. High Flow. Aluminum Bodies Air and Inert Gas 3/4" to 3" NPT.
4 qwer High Flow Main Pulse Valves Aluminum Bodies Air and Inert Gas 3/4" to 3" NPT NC 2/2 SERIES Features Specially designed for reverse jet-type dust collector systems. High flow Cv s to 140 for effective
2/2 ^ % ) Pilot Operated General Service Solenoid Valves. Brass or Stainless Steel Bodies 3/8" to 2 1/2" NPT. Features. Construction.
4 ilot Operated General Service Solenoid Valves Brass or Stainless Steel Bodies 3/8" to 2 1/2" 8210 2-AY Features ide range of pressure ratings, sizes, and resilient materials provide long service life
Parker Fluid Control Angle Body Valves
Parker Fluid Control Angle Body Valves Angle Body Valve Key Features RED Position indicator on all models Housing is 304 SS standard, or optional Aluminum Piston ring FKM Brass Piston Pilot port available
Temperature Sensor Series
GENERAL DESCRIPTION The patented* No. 85026-Series Temperature Sensor contains a two-position valve operated by temperature variations around the integral sensing bulb. It is used to vent or block a pneumatic
OPERATOR S MANUAL AND SALES AND ENGINEERING DATA
OPERATOR S MANUAL AND SALES AND ENGINEERING DATA INCLUDING: SPECIFICATIONS, SERVICE KITS, GENERAL INFORMATION, PARTS, TROUBLESHOOTING. INCLUDE MANUALS: AF044X-XX Air Motor (pn 97999-1466) & S-632 General
Type EV224B. Servo-operated 2/2-way solenoid valves for high pressure air. Data sheet
Data sheet Servo-operated 2/2-way solenoid valves for high air Type EV224B EV224B for compressed air, is a high indirect servo-operated 2/2-way solenoid valve with working up to 40 bar, medium temperature
3/2-way and 2 x 3/2-way Solenoid Valve for pneumatics
654 3/-way and x 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Fast response times Space saving ( x 3/-way version) Type 654 can be combined with...
MAx-305 & MAx-318 Series MAx-405 Through MAx-419 Series Two-Position Actuators
MAx-305 & MAx-38 Series MAx-405 Through MAx-49 Series Two-Position Actuators General Instructions Application For two-position operation of dampers, valves, and other equipment which require the return
Constructions Suitable for -40 C to -50 C Ambient. 2, 3 and 4 Way Constructions Available. Brass, Aluminum and Stainless Steel Bodies
Constructions Suitable for - C to -5 C Ambient, 3 and Way Constructions Available Brass, Aluminum and Stainless Steel Bodies Air and Inert Gas Service INDEX General Service Valves -Way/ Position 8 Aluminum
2/2 and 3/2-way Flipper Solenoid Valve, with hermetic isolation of fluid
2/2 and 3/2-way Flipper Solenoid Valve, with hermetic isolation of fluid Low internal volume Low power consumption High back pressure tightness Optional impulse model Type 612 can be combined with... DN
Servo-operated 2/2-way solenoid valves for high pressure
Data sheet Servo-operated 2/2-way solenoid valves for high Type EV224B EV224B for compressed air, is a high indirect servo-operated 2/2-way solenoid valve with working up to 40 bar, medium temperature
Solenoid Valves & Accessories. Cylinder Control Bases. Features. Performance Data. Materials
Valves & Accessories PNEUMADYNE, INC. Catalog 00 Phone 76-559-077 Fax 76-559-057 Features l Controls cylinder extension and retraction l Allows rapid cylinder return l -Way Normally Closed l Quick Exhaust
Miniature Pneumatic Solenoid Valve
V Valve 15 mm Pneumatic Solenoid Valve Typical Applications Oxygen Conservers Flow control/shut-off valve Portable Medical Devices Product Specifications Mechanical Valve Type: /3 Port, Direct-acting poppet
Solenoid Valve ST-IA-series
2/2-WAY INDIRECT OPERATED NORMALLY CLOSED Solenoid Valve ST-IA-series The ST-IA is an indirect operated 2/2-way solenoid valve. The valve is normally closed. The solenoid valves have an orifice of 13 to