Drum mower BDR-595E. EuroAdela. Spare part list

Transcription

1 Drum mower BDR-595E EuroAdela Spare part list

2 1. Covers 2

3 Covers Pos. Name Size Drawing-Standard Ord. No. Pcs 1 Frame Screen frame front part Screen frame rear part Upper cover Mud flap holder Mud flap Mud flap pad Pillar Rear pillar Screen Left mud guard Right mud guard Lower cover 1) Bolt M6x16 ČSN Bolt M6x20 ČSN Bolt M8x16 ČSN Bolt M8x30 ČSN Nut M6 ČSN Nut M8 ČSN Washer 6,4 ČSN Washer 8,4 ČSN Washer 6,6 ČSN Washer 9 ČSN Washer 8,2 ČSN Nut cap M6 SUNAP Neratovice Nut cap M8 (13) SUNAP Neratovice Note: 1) valid for mowers with upper disc (long collar; since 05/2005); following part is used for mowers with upper disc (short collar): Lower cover More information on cutting discs see Addition on page 12 3

4 2. Handlebars 4

5 Handlebars Pos. Name Size Drawing-Standard Ord. No. Pcs 1 Handlebars Control lever Bowden cable of clutch Bowden cable of pulley Bowden cable of brake Lever stop Lever pin Bolt M5x10 ČSN Bolt M8x50 ČSN Nut M6 ČSN Nut M5 ČSN Washer 8,4 ČSN Yoke ring 4 ČSN Washer 5,3 ČSN Plastic nut M8 JJW Rubber handle ART 773 black Accelerator lever 1AT

6 3. Cutting disc drive 6

7 Cutting disc drive Pos. Name Size Drawing-Standard Ord. No. Pcs 1 Brake shoe Driven pulley Upper disc Brake toggle Roller arm Disc holder Drive shaft Lower disc Blade 50x3x see below 4 10 Shim 42x36x0, Distance ring Cover Roller Flange Ring Brake shoe pin Bushing of roller bearing Brake shoe spring Spring TZ 1,8x16,2x63x Spring T Bolt M6x14 ČSN Bolt M6x45 ČSN Bolt M6x30 ČSN Bolt M10x20 ČSN Nut M6 ČSN Nut M6 ČSN Nut M10 (OK16) ČSN Washer 6,4 ČSN Washer 8,4 ČSN Washer 10,5 ČSN Washer 21 ČSN Washer 6,1 ČSN Elastic pin 5x40 ČSN Key 5e7x5x25 ČSN Key 6x6x25 ČSN Retaining ring 8 ČSN Retaining ring 10 ČSN Retaining ring 20 ČSN Retaining ring 35 ČSN Retaining ring 42 ČSN Bearing RS ČSN Bearing RS Note: 1) the machine is delivered with a tubular spanner No. 16 with a handle 2) the blades are only available in a set with pos. 16, 25, 28, 31 (set of 4 pcs of each part, i.e. 1 set for 1 disc): Set of spare blades 50x3x

8 4. Wheel drive 8

9 Wheel drive Pos. Name Size Drawing-Standard Ord. No. Pcs 1 Gearbox Driving pulley Driven part of clutch B Engine plate Key 3/16" Bolt W 3/8" Wheel cuff Black Free wheel clutch Spring Spring of wheel clutch Bolt M5x12 ČSN Bolt M8x16 ČSN Bolt M8x40 ČSN Nut M8 ČSN Nut M16x1,5 ČSN Washer 5,1 ČSN Washer 5,3 ČSN Washer 8,2 ČSN Washer 8,4 ČSN Washer 10,2 ČSN Washer 17 ČSN Cotter pin 4x32 ČSN Key 4e7x4x18 ČSN Left wheel EP-007 ET see below 1 25 Right wheel EP-007 ET see below 1 26 V-belt X13x1300 Ld 6T6K OPTIBELT Engine HONDA GCV 160 E-N2-E8-OH Ball d. 7, Rubber part of clutch Note: for a simple wheel exchange, the wheels are delivered with pressed-on balls (pos. 28) under following designation: Left wheel Right wheel

10 5. Gearbox 10

11 Gearbox Pos. Name Size Drawing- Standard Ord. No. Pcs 1 Fork weldment A Lever assembly Drive disc assembly Worm shaft 2: Worm gear Shaft wheel axle Shim 20/14,2/0, Shim 20/14,2/0, Distance ring 10, Dish Plug Pinion, 19 teeth Gear, 51 teeth Cover Box Felt sealing Spring Bolt M4x10 ČSN Pin 5x12 ČSN Pin 5x20 ČSN Pin 10x45 ČSN Retaining ring 12 ČSN Retaining ring 14 ČSN Retaining ring 17 ČSN Retaining ring 28 ČSN Retaining ring 47 ČSN Bearing 3203 ČSN Bearing 6005 ČSN Bearing 6202 ČSN Bearing 6203 ČSN Ring 18x14 ČSN Ring 14x18 AL ČSN Shaft sealing 17x30x7 ČSN Shaft sealing 25x47x7 ČSN Key 6x6x20 ČSN

12 6. Addition cutting discs All cutting discs with 3 openings (for 3 blades) are replaced by cutting discs with 4 openings (for 4 blades). The old discs with 3 openings are no longer available and the part numbers remain unchanged for the new discs with 4 openings. No additional changes are necessary if you want to replace a disc with 3 openings with a disc with 4 openings. It is possible to rebuild a machine with the upper disc with short collar (189056) to a machine with the upper disc with long collar (196056). It is only necessary to replace the lower cover and the upper disc with short collar (189056) with the lower cover and the upper disc with long collar (196056) simultaneously. From 2010 the machines are equipped with new blades longer, wider and heavier. The old blades can be replaced without any additional changes (all the blades at the same time!). The cutting quality should be improved. From 2010 all the blade sets include the bolts, the nuts, the washers and the rings as well (see page 7). Overview of the blade sets: Part No. Description Note Set of 3 blades with bolts, nuts, washers & rings for discs with 3 openings Only available until sold out; can be replaced by or Set of 4 blades with bolts, nuts, washers & rings Can be replaced by Set of 4 blades with bolts, nuts, washers & rings; new blades (longer, wider, heavier) Always change all blades at once, so that the cutting discs remains well balanced! 12