Watertight Cable Catalogue. For drinking, waste and hot water application

Transcription

1 Watertight Cable Catalogue For drinking, waste and hot water application

2 Linking the future s the worldwide leader in the cable industry, Prysmian Group believes in the effective, efficient and sustainable supply of energy and information as a primary driver in the development of counities.with this in mind, we provide major global organisations in many industries with best-in-class cable solutions, based on stateof-the-art technology. Through two renowned coercial brands - Prysmian and Draka - based in almost 50 countries, we re constantly close to our customers, enabling them to further develop the world s energy and telecoms infrastructures and achieve sustainable and profitable growth. For our energy business, we design, produce, distribute and install cables and systems for the transmission and distribution of power at low, medium, high and extra-high voltage. For telecoms, the Group is a leading manufacturer of all types of copper and fibre cables, systems and accessories for voice, video and data transmission. Drawing on over 130 years experience and continuously investing in R&D, we apply excellence, understanding and integrity to everything we do, meeting and exceeding the needs of our customers across all continents - while at the same time shaping the evolution of our industry. 2

3 Linking product expertise to the flow of water To keep cities and industry running, water and other critical fluids must flow. For fluids to flow they must be pumped. nd for these pumps to operate continually, cables are critical. From farm fields and your garden s irrigation equipment, to municipal water systems, industrial wastewater disposal systems, water conditioning systems and more; all require the use of electrical pumps, installed in extreme environmental conditions. Whether for a high power pumping system or a portable pump, Prysmian offers a complete range of high performance and reliable solutions that ensure long lifetime Compliance with current standards Resistance towards aggressive chemical and environmental agents 3

4 Revision of the EU Drinking Water Directive History of legislation The European Union currently has no coon guidelines for quality assurance of products that are in direct contact with drinking water. s the ES European cceptance Scheme was abandoned in National Standards However, since 2007 four Member States (France, the Netherlands, Great Britain and Germany) have voluntarily agreed to follow a testing system for the assessment of products in direct contact with the drinking water supply, coonly refered to as the 4MS Initiative. Since 2014, the industry and authorities in four Scandinavian countries (Denmark, Finland, Norway and Sweden) through the MaiID project have also cooperated to promote innovation and develop coon Nordic rules for products in direct contact with the drinking water supply. Industry ssociation European Drinking Water (EDW) is a trade union for European trade unions that supplies products and materials for drinking water supplies. Their mission is to argue for a lack of harmonization of EU legal requirements and to achieve a coon EU harmonized system for requirements and assessment of products and materials for drinking water supplies. EU Mandate to Revise Standard M / 136 DWD - Drinking Water Directive In October 2017 the European Coision issued new mandates to replace M / 136 CEN / CENELEC in order to harmonize standards for products in contact with drinking water. EU Environmental Coittee Proposal The European Parliament's Environment Coittee (ENVI Coittee) responsible for the revision of the Drinking Water Directive voted on its amendments to the Coission proposal on 10 September EU Parliament Vote Following this the EU Parliament will vote on the recast of the Drinking Water Directive in its plenary meeting on October 23rd, Next Steps Now the European Parliament will be prepared to open negotiations with the Council (EU national governments) on a compromise text, which will be formally adopted by both EU chambers, becoming EU legislation. This should be finalized by the end of

5 Outcome of European Parliament vote The members of the Europen Parliament backed plans on October 23, 2018 to harmonise rules for materials and products in contact with drinking water across Europe under the Drinking Water Directive.The European Parliament position will help overcome the current fragmentation of regulations. This is good for public health, competitiveness and innovation. Tap Water The Europen Parliament wants to improve consumers trust in drinking water from the tap, which is much cheaper and cleaner for the environment compared to bottled water. The legislation tightens the maximum limits for certain pollutants such as lead (to be reduced by half), harmful bacteria, and introduces new caps for certain endocrine disruptors. It also puts levels of microplastics, an emerging concern, under monitoring. Water ccess Member states should also take measures to provide universal access to clean water in the EU and improve water access in cities and public places, by setting up free fountains where technically feasible and proportionate. They should also encourage tap water to be provided in restaurants, canteens and catering services for free or for a low service fee. Right to Water MEPs reiterate, following-up on their resolution on the citizens initiative Right2Water, that member states should focus on the needs of vulnerable groups in society. They should identify people without access, or with limited access to water, including vulnerable and marginalised groups, and assess ways to improve their access. They should also inform them clearly about how to connect to the distribution network or about alternative means to have access to such water. Vote The report was adopted with 300 votes to 98 and 274 abstentions. Background ccording to the European Coission, lower consumption of bottled water could help EU households save more than 600 million per year. If confidence in tap water improves, citizens can also contribute to reducing plastic waste from bottled water, including marine litter. Plastic bottles are one of the most coon single use plastic items found on European beaches. 5

6 Water Cable pprovals Water Regulation dvisory Scheme (WRS) WRS approval is required for many drinking water treatment devices and other products sold in the U.K. and Northern Ireland. The WRS is in effect to prevent the waste, misuse, undue consumption, contamination or erroneous measurement of water. The scheme consists of two portions of testing: material safety testing and mechanical testing. The material safety testing is performed in accordance with the British Standard It is comprised of five individual tests and its purpose is to ensure that the product does not impart any negative odor or flavor, leach anything harmful to a consumer s health or promote the growth of microorganisms. Mechanical testing ensures a product is watertight and properly identified. Elastomerleitlinie of Umwelt Bundesamt (ELL) The German Drinking Water Elastomer Guideline was notified to the EU under no. 2013/471/D, pursuant to Directive 98/34/EEC. The valid version was published 16th March This guideline govern the allowed list of substances used for organic materials in contact with drinking water with respect to evaluation criterias. For some materials the formula-specific requirements concerning migration into drinking water can be computed mathematically by using the Modelling Guideline, rather than being substantiated analytically. fter materials and mechanical testing is successfully completed, the information is sent to the Test and ssessment Group (TG) for review. The TG meets at scheduled dates throughout the year to review the submitted information. Upon review and acceptance, WRS approval is issued. pproval is valid for five years 6

7 Kunststoffer und Trinkwasser (KTW) DVGW (Deutsche Vereinigung des Gas & Wasserfaches) regulates the German gas and water supply with products certified according to KTW guidelines. KTW guidelines for hygienic assessment of organic materials in contact with drinking water, was notified to the European Coission under no. 2013/470/D, pursuant to Directive 98/34/EEC. The KTW guideline contains test protocols and safety requirements for plastics and silicones that come into contact with drinking water. For some materials the formula specific requirements concerning migration into drinking water can be computed mathematically, by using the Modelling Guideline, rather than being substantiated analytically. The Minimis Guideline can additionally be used as a basis for formula testing for substances that are used in small amounts and that have specific technological functions. ttestation de Conformité Sanitaire (CS) To establish and maintain health compliance for products in contact with water for human consumption, the French health authorities in 1999 developed a system of ttestation of Sanitary Compliance (CS). Certifications may only be issued by a laboratory authorized by the Minister for Health pursuant to rticle R of the Public Health Code. The validity period of an CS is fixed to a five year period. To date, certificate is applicable to organic materials and objects as well as accessories and accessory sub-assemblies consisting of at least one organic component coming into contact with water. 7

8 Watertight cables 8

9 Products WSTE WTER CBLES RUBBER SHETHED Flexible 0,6/1 kv OZOFLEX (PLUS) H07RN8-F...12 TECWTER S1BN8-F Tinned CU screen 0,6/1 kv TECWTER EMC-FC S1BC4N8-F HOT WTER CBLES 450/750 V Maximum temperature 130 C HYDROFIRM TGSH ROUND...54 Maximum temperature 150 C HYDROFIRM TGSH2G ROUND...56 Robust flexible 0,6/1 kv PROTOMONT NSSHOEU Robust flexible 3,6/6 kv MS-TECWTER (N)TSWOEU...26 DRINKING WTER CBLES ELL & CS PPROVED 450/750 V UP TO 60 C HYDROFIRM (T) S07BB-F ROUND HYDROFIRM (T) S07BBH2-F FLT ,6/1 kv UP TO 60 C HYDROFIRM (T) S1BB-F ROUND HYDROFIRM (T) S1BBH2-F FLT HYDROFIRM (T) EMC-FC S1BC4B-F ROUND TLM ROUND TYPE B TLM FLT TYPE B POTFLEX ROUND ,6/6 kv UP TO 60 C MS-HYDROFIRM (T) (N)TSW ROUND

10 Watertight cables 10

11 WSTE WTER CBLES Designation Standard Fire performance Resistance to oil pprovals OZOFLEX (PLUS) DIN EN DIN EN DIN EN VDE H07RN8-F TECWTER S1BN8-F Based on DIN EN DIN EN DIN EN VDE TECWTER EMC-FC S1BC4N8-F PROTOMONT NSSHOEU MS-TECWTER (N)TSWOEU Based on DIN EN DIN EN DIN EN VDE DIN VDE DIN EN DIN EN VDE Gost K, Gost B MSH P Based on DIN EN DIN EN DIN VDE

12 OZOFLEX(PLUS) OZOFLEX(PLUS) H07RN8-F H07RN8-F pplication OZOFLEX(PLUS) rubber-sheathed cables H07RN8-F are intended for connection of electrical equipment in contaminated water and for medium mechanical stresses. Due to the various substances in the contaminated water, the cables may be used only in easily accessible areas that can be inspected (installation depth of approx. 10 m, as normally used in sewage water tanks). These cables are also suitable for use in process water, cooling water, mine surface water, rainwater and combined waste water. They further can be used in groundwater and seawater; less stringent specifications in terms of accessibility and inspection can be imposed (in such cases the cables can be used at depths up to 2000 m). Water types are defined in accordance with DIN 4045 and DIN If the water concerned is aggressive or composed of special substances, the cable's resistance properties should be examined. These cables can be used indoors, outdoors, in explosion-hazard areas to DIN VDE 0165, in fire-hazard locations, on construction sites in accordance with DIN VDE 0100 Part 704, in open-cast mining and in quarries in accordance with DIN VDE 0168, in industry and in agriculture. They can also be permanently installed, e.g. on plaster, on excavators or on hoisting gear. If they are permanently installed in protective conduits or equipment, or e.g. in well installations or are used as rotor circuit cables for motors, the cables may be operated with an C voltage of up to 1000 V or a DC voltage to earth of up to 750 V. Permissible C test voltage in connection with motor tests is 3 kv, max. test duration of 3 minutes. The insulating and sheath materials used allow a max. conductor temperature of 90 C. Thanks to this characteristic, which is verified by a report from the VDE Test and Certification Institute, cables may be used according to the specifications of Federal Testing Laboratories (PTB) for explosion-protected pumps. In other respects the specifications of DIN EN apply. Global data Brand OZOFLEX(PLUS) Type designation H07RN8-F Standard EN Notes on installation Maximum Submersing Depth 2000 Meter Design features Conductor Copper, finely stranded, class 5 in accordance with DIN EN / IEC 60228; tinned up to and including 6 ² Insulation Vulcanized rubber compound, basis EPR, compound EI7 in accordance with DIN EN Color code up to 5 cores: colored in accordance with DIN VDE from 6 cores: acc. to EN nnex D Inner sheath for multicore cables with wall thickness of sheath > 2,4 and control cables: vulcanized rubber compound, basis EPR, compound EM6 in accordance with DIN EN Colour of sheath: light sheath Vulcanized rubber compound, basis CPE, compound EM7 in accordance with DIN EN Sheath Colour Black Electrical parameters Rated voltage 450/750V Max. permissible operating voltage C 0.476/0.825 kv Max. permissible operating voltage DC 0.619/1.238 kv C Test Voltage 2.5 kv (15 Min.) Chemical parameters Flame propagation DIN EN Resistance to oil DIN EN Water resistance DIN EN Thermal parameters Max. permissible temperature at conductor 90 C Max. short circuit temperature of the conductor 250 C Max. permissible water temperature 40 C (t higher water temperatures, a shortened cable service life is to be expected) mbient temperature for fix installation -40 C mbient temp. in fully flex. operation -25 C Mechanical parameters Max. tensile load on the conductor 15 N/² Min. bending cc. to DIN VDE 0298 part 3 12 OZOFLEX(PLUS)

13 Number of cores x cross section Part number MLFB Number max. fixed free moving Weight (approx.) kg/km Permissible tensile force max. N free in air (2) in water Short Circuit (conductor) k 1x1, DH x2,5 5DH x DH x DH x DH x DH x DH x DH x DH x DH x DH x DH x DH x DH x DH x DH x DH x1, DH x2, DH x DH x DH G DH G1, DH G2, DH G4 5DH G6 5DH G DH x1,5 5DH x2,5 5DH x4 5DH x6 5DH x DH x DH x DH x DH x DH x DH x DH x DH G DH G1, DH G2, DH G DH G DH G DH G DH G DH G DH x = without ye/gn core; G = with ye/gn core OZOFLEX(PLUS) 13

14 Number of cores x cross section Part number MLFB Number max. fixed free moving Weight (approx.) kg/km Permissible tensile force max. N free in air (2) in water Short Circuit (conductor) k 4G DH G DH G DH G DH G DH G1, DH G2, DH G DH G DH G10 5DH G DH G1, DH G1, DH G1, DH G1, DH G1,5 5DH G1, DH G2, DH G2, DH G2, DH G2, DH in water: The values are valid for permanent operation with DC or C with 50 up to 60 Hz at 30 C ambient water temperature, two or three cores loaded, multi-core cables all cores loaded (cable compete iersed in water). (2) free in air: The values are valid for permanent operation with DC or C with 50 up to 60 Hz at 30 C ambient temperature, two or three cores loaded, multi-core cables all cores loaded (see also DIN VDE 298-4). x = without ye/gn core; G = with ye/gn core 14 OZOFLEX(PLUS)

15 NOTES PROTOLON(M)-R 6kV: Medium Voltage Reeling OZOFLEX(PLUS) Technical data, dimensions and weights are 15

16 TECWTER TECWTER S1BN8-F - 0.6/1 kv S1BN8-F 0.6/1kV pplication TECWTER rubber-sheathed cables S1BN8-F are intended for connection of electrical equipment in contaminated water and for medium mechanical stresses. Due to the various substances in the contaminated water, the cables may be used only in easily accessible areas that can be inspected (installation depth of approx. 10 m, as normally used in sewage water tanks). These cables are also suitable for use in process water, cooling water, mine surface water, rainwater and combined waste water. They further can be used in groundwater and seawater; less stringent specifications in terms of accessibility and inspection can be imposed (in such cases the cables can be used at depths up to 2000 m). Water types are defined in accordance with DIN 4045 and DIN If the water concerned is aggressive or composed of special substances, the cable's resistance properties should be examined. These cables can be used indoors, outdoors, in explosion-hazard areas to DIN VDE 0165, in fire-hazard locations, on construction sites in accordance with DIN VDE 0100 Part 704, in open-cast mining and in quarries in accordance with DIN VDE 0168, in industry and in agriculture. They can also be permanently installed, e.g. on plaster, on excavators or on hoisting gear. In other respects the specifications of DIN EN apply. Global data Brand TECWTER Type designation S1BN8-F Standard Based on EN Notes on installation Maximum Submersing Depth 2000 Meter Design features Conductor Plain copper, finely stranded class 5 in accordance with DIN EN / IEC Insulation Ozone, water and weather resistant insulation compound, base EPR (Ethylene-Propylene Rubber) Color code up to 5 cores: colored in accordance with DIN VDE from 6 cores: more than 5 cores: Cores light, printed with black numbers 4G4+2X0,75: green-yellow, brown, black, grey; control cores light with black numbers; 7G..+5X1,5: green-yellow, other cores black with white numbers; control cores light with black numbers; Inner sheath For all multi core cables with cross-section more than 6² and all cables with more than 5 cores: Inner layer of CPE special compound; color: blue sheath Special rubber compound based on CPE, water and oil-resistant Sheath Colour Black Electrical parameters Rated voltage Max. permissible operating voltage C Max. permissible operating voltage DC C Test Voltage 0.6/1 kv (600/1000V) 0.7/1.2 kv 0.9/1.8 kv 3.5 kv (5 Min.) Chemical parameters Flame propagation DIN EN Resistance to oil DIN EN Water resistance DIN EN Thermal parameters Max. permissible temperature at conductor 90 C Max. short circuit temperature of the conductor 250 C Max. permissible water temperature 40 C (t higher water temperatures, a shortened cable service life is to be expected) mbient temperature for fix installation -40 C mbient temp. in fully flex. operation -25 C Mechanical parameters Max. tensile load on the conductor 15 N/² Min. bending cc. to DIN VDE 0298 part 3 16 TECWTER

17 Number of cores x cross section Part number MLFB Number max. fixed free moving Weight (approx.) kg/km Permissible tensile force max. N free in air (2) in water Short Circuit (conductor) k 1X1,5 5DH X2,5 5DH X4 5DH X6 5DH X10 5DH X16 5DH X25 5DH X35 5DH X DH X70 5DH X DH X120 5DH X DH X DH X240 5DH X DH X400 5DH X500 5DH X1 5DH X1,5 5DH X2,5 5DH X4 5DH X6 5DH X10 5DH X16 5DH X25 5DH G1 5DH G1, DH G2,5 5DH G4 5DH X1 5DH X1,5 5DH X2,5 5DH X4 5DH X DH X10 5DH X16 5DH X25 5DH X35 5DH X50 5DH X70 5DH X95 5DH X120 5DH X150 5DH X185 5DH X240 5DH G DH G1, DH x = without ye/gn core; G = with ye/gn core TECWTER 17

18 Number of cores x cross section Part number MLFB Number max. fixed free moving Weight (approx.) kg/km Permissible tensile force max. N free in air (2) in water Short Circuit (conductor) k 4G2, DH G DH G DH G DH G DH G DH G DH G DH G DH G DH G DH G DH G185 5DH G240 5DH G300 5DH G1, DH G2,5 5DH G4 5DH G6 5DH G10 5DH G16 5DH G25 5DH G G1, DH G1, DH G1, DH G1, DH G1, DH G2, DH G2,5 5DH G2, DH G2, DH G4+2X0,75ST DH G4+5X1,5ST DH G6+5X1,5ST DH G10+5X1,5ST DH in water: The values are valid for permanent operation with DC or C with 50 up to 60 Hz at 30 C ambient water temperature, two or three cores loaded, multi-core cables all cores loaded (cable compete iersed in water). (2) free in air: The values are valid for permanent operation with DC or C with 50 up to 60 Hz at 30 C ambient temperature, two or three cores loaded, multi-core cables all cores loaded (see also DIN VDE 298-4). x = without ye/gn core; G = with ye/gn core 18 TECWTER

19 NOTES PROTOLON(M)-R 6kV: Medium Voltage Reeling TECWTER Technical data, dimensions and weights are 19

20 TECWTER EMC-FC TECWTER EMV-FC S1BC4N8-F S1BC4N8-F pplication TECWTER EMV-FC rubber-sheathed cables S1BC4N8-F are intended for connection of electrical equipment in contaminated water and for medium mechanical stresses, e.g. submersible pumps in sewage disposal and treatment as well as submersible mixer. Especially for frequency converter controlled C drives and if considerable demands in respect of electromagnetic compatibility (EMC) according to the EMC directive imposes. For an effective shielding both ends of cable must have a good shield contact to ground. Due to the various substances in the contaminated water, the cables may be used only in easily accessible areas that can be inspected (installation depth of approx. 10 m, as normally used in sewage water tanks). These cables are also suitable for use in process water, cooling water, mine surface water, rainwater and combined waste water. They further can be used in groundwater and seawater; less stringent specifications in terms of accessibility and inspection can be imposed (in such cases the cables can be used at depths up to 2000 m). Water types are defined in accordance with DIN 4045 and DIN If the water concerned is aggressive or composed of special substances, the cable's resistance properties should be examined. These cables can be used indoors, outdoors, in explosion-hazard areas to DIN VDE 0165, in fire-hazard locations, on construction sites in accordance with DIN VDE 0100 Part 704, in open-cast mining and in quarries in accordance with DIN VDE 0168, in industry and in agriculture. They can also be permanently installed, e.g. on plaster, on excavators or on hoisting gear. In other respects the specifications of DIN EN apply. Global data Brand TECWTER Type designation S1BC4N8-F Standard Based on EN Notes on installation Maximum Submersing Depth 2000 Meter Design features Conductor Plain copper, finely stranded class 5 in accordance with DIN EN / IEC Insulation Ozone, water and weather resistant insulation compound, base EPR (Ethylene-Propylene Rubber) Color code colored in accordance with DIN VDE Inner sheath For all multi core cables with cross-section more than 6²: Inner layer of CPE special compound; color: blue Screen over inner sheath Braid of tinned copper wires Maximum transfer impedance 30Ω/km at 30MHz sheath Special rubber compound based on CPE, water and oil-resistant Sheath Colour Black Electrical parameters Rated voltage Max. permissible operating voltage C Max. permissible operating voltage DC C Test Voltage Peak voltage 0.6/1 kv (600/1000V) 0.7/1.2 kv 0.9/1.8 kv 5 kv (5 Min.) 2400 V Chemical parameters Flame propagation DIN EN Resistance to oil DIN EN Water resistance DIN EN Thermal parameters Max. permissible temperature at conductor 90 C Max. short circuit temperature of the conductor 250 C Max. permissible water temperature 40 C (t higher water temperatures, a shortened cable service life is to be expected) mbient temperature for fix installation -40 C mbient temp. in fully flex. operation -25 C Mechanical parameters Max. tensile load on the conductor 15 N/² Min. bending cc. to DIN VDE 0298 part 3 20 TECWTER EMC-FC

21 Number of cores x cross section Part number MLFB Number max. fixed free moving Weight (approx.) kg/km Permissible tensile force max. N free in air (2) in water Short Circuit (conductor) k 3X1,5/1,5KON 5DH X2,5/2,5KON 5DH X4/4KON 5DH X6/6KON DH X10/10KON DH X16/16KON DH X25+3G16/ DH X35+3G16/ DH X50+3G25/ DH X70+3G35/ DH X95+3G50/ DH X120+3G70/ DH (2) Nominal current for multicore cable or three single-core cables in trefoil in permanent operation with DC or C with 50 up to 60 Hz at 30 C ambient temperature, free in air, three cores loaded. (see also VDE ) in water: The values are valid for a multicore cable or three single-core cables in trefoil in permanent operation with DC or C with 50 up to 60 Hz at 30 C ambient water temperature, three cores loaded. TECWTER EMC-FC 21

22 PROTOMONT NSSHOEU NSSHOEU 1kV 1kV Flexible PROTOMONT Rubber Cables pplication For flexible use and fixed installation open-cast mining applications, in quarries, on construction sites and similar applications, with heavy mechanical stresses. The cables can be used indoors as well as outdoors, in explosion-hazard areas, in industry and in agriculture. They can be used permanently in waste water up to 40 C at a depth of max m and in industrial water, cooling water, surface water, rainwater and mixed water - and in groundwater and seawater to a more limited extent. The requirements for accessibility and inspection depend on the consistency of the water.in aggressive water or composed of special substances, the cable's resistance properties should be tested. In other respects the specifications of DIN VDE 0298 part 3 applies. Global data Brand PROTOMONT Type designation NSSHOEU Standard DIN VDE Certifications / pprovals M China MSH P Fire Certificate of Russian Federation TR-Certificate GOST K GOST B Notes on installation Notes on installation Maximum submersing depth 2000 meters Design features Conductor Copper, tinned, finely stranded (class 5) in accordance with DIN EN / IEC Insulation PROTOLON, Basic material: EPR, Compound type: 3GI3 in accordance with DIN EN Core identification Up to 5 cores: colored in gray, black, brown, blue, green/yellow from 6 cores: light gray with black digits Core arrangement Three main conductors laid-up together with the protective-earth conductor, from 50 ² with protective-earth conductor split into three in the outer interstices Inner sheath Vulcanized rubber compound, Basic material: EPR, Compound type: GM1B in accordance with DIN EN (not for single-core cables) sheath Vulcanized rubber compound, synthetic elastomer compound e.g. CPE, Compound: 5GM5 in accordance with DIN EN 50363, Color: Yellow Electrical parameters Rated voltage Max. permissible operating voltage C Max. permissible operating voltage DC C test voltage Duration of C test voltage 0.6/1 kv (600/1000V) 0.7/1.2 kv 0.9/1.8 kv 3 kv 5 Chemical parameters Resistance to fire DIN EN Resistance to oil DIN EN Weather resistance Unrestricted use outdoors and indoors, resistant to ozone and moisture Water resistance DIN EN Thermal parameters Max. permissible temperature at conductor 90 C Max. short circuit temperature of the conductor 250 C Max. permissible water temperature 40 C (t higher water temperatures, a shortened cable service life is to be expected) mbient temperature for fix installation -40 C mbient temp. in fully flex. operation -25 C mbient temp. in fully flex. operation max. 60 C Mechanical parameters Max. tensile load of cable 15 N/² Torsional stress 100 /m Min. bending cc. to DIN VDE 0298 part 3 22 PROTOMONT NSSHOEU 1kV

23 Number of cores x cross section Part number MLFB Number max. Net weight approx. kg/km Permissible tensile force max. N Nominal operating capacitance µf/km Inductance nom. mh/ km (1) Short Circuit (conductor) k PROTOMONT NSSHÖU-O 1x 1x DL x DL x DL x DL x DL x DL x DL x DL x DL x DL x DL PROTOMONT NSSHÖU-O 2x 2x1, DL x2, DL x4 5DL PROTOMONT NSSHÖU-O 3x 3x1,5 5DL x2, DL x4 5DL x6 5DL x10 5DL x16 5DL x25 5DL x DL x DL PROTOMONT NSSHÖU-J 3x 3x1, DL x2, DL x DL x6 5DL PROTOMONT NSSHÖU-J 4x 4x1, DL x2, DL x DL x DL x DL x DL x16+4x2, DL x DL x DL x DL x DL x DL x DL PROTOMONT NSSHOEU 1kV 23

24 Number of cores x cross section Part number MLFB Number max. Net weight approx. kg/km Permissible tensile force max. N Nominal operating capacitance µf/km Inductance nom. mh/ km (1) Short Circuit (conductor) k 4x DL x DL x DL PROTOMONT NSSHÖU-J 3x / 3x50/ DL x70/ DL x95/ DL x120/ DL x150/ DL x185/ DL PROTOMONT NSSHÖU-J 3x +3x.../3 3x x95/3 5DL PROTOMONT NSSHÖU-J 5x 5x1, DL x2, DL x DL x DL x DL x DL x DL x DL PROTOMONT NSSHÖU-J x1,5 7x1, DL x1, DL x1, DL x1, DL PROTOMONT NSSHÖU-J x2,5 7x2, DL x2, DL x2, DL x2, DL x2,5 5DL PROTOMONT NSSHÖU-J x4 7x DL x DL PROTOMONT NSSHÖU-J x10 7x10+5x1,5ST DL x4+5x1,5ST DL (1) Nominal current for multicore cable or three single-core cables in trefoil in permanent operation with DC or C with 50 up to 60 Hz at 30 C ambient temperature, free in air, three cores loaded. (see also VDE ) 24 PROTOMONT NSSHOEU 1kV

25 NOTES PROTOLON(M)-R 6kV: Medium Voltage Reeling PROTOMONT NSSHOEU 1kV Technical data, dimensions and weights are 25

26 MS-TECWTER (N)TSWOEU 3,6/6KV MS-TECWTER (N)TSWOEU pplication MS-TECWTER rubber-sheathed cables (N)TSWOEU are intended for connection of electrical equipment in contaminated water and for heavy mechanical stresses, e.g. submersible pumps in sewage disposal and treatment as well as submersible mixer. Due to the various substances in the contaminated water, the cables may be used only in easily accessible areas that can be inspected (installation depth of approx. 10 m, as normally used in sewage water tanks). These cables are also suitable for use in process water, cooling water, mine surface water, rainwater and combined waste water. They further can be used in groundwater and seawater; less stringent specifications in terms of accessibility and inspection can be imposed (in such cases the cables can be used at depths up to 2000 m). Water types are defined in accordance with DIN 4045 and DIN If the water concerned is aggressive or composed of special substances, the cable's resistance properties should be examined. These cables can be used indoors, outdoors, in explosion-hazard areas. In other respects the specifications of DIN VDE 0298 part 3 apply. Global data Brand TECWTER Type designation (N)TSWOEU Standard Based on EN Notes on installation Maximum Submersing Depth 2000 Meter Design features Conductor Plain copper, finely stranded class 5 in accordance with DIN EN / IEC Insulation Ozone, water and weather resistant insulation compound, base EPR (Ethylene-Propylene Rubber) Electrical field control Inner layer of semiconductive rubber compound Color code Cores light, printed with black numbers Inner sheath For all multi core cables with cross-section more than 6²: Inner layer of CPE special compound; color: blue sheath Special rubber compound based on CPE, water and oil-resistant Sheath Colour Black Electrical parameters Rated voltage Max. permissible operating voltage C Max. permissible operating voltage DC C Test Voltage 3.6/6 kv 4.2/7.2 kv 5.4/10.8 kv 11 kv (5 Min.) Chemical parameters Flame propagation DIN EN Resistance to oil DIN EN Water resistance DIN EN Thermal parameters Max. permissible temperature at conductor 90 C Max. short circuit temperature of the conductor 250 C Max. permissible water temperature 40 C (t higher water temperatures, a shortened cable service life is to be expected) mbient temperature for fix installation -40 C mbient temp. in fully flex. operation -25 C Mechanical parameters Max. tensile load on the conductor 15 N/² Min. bending cc. to DIN VDE 0298 part 3 26 MS-TECWTER

27 Number of cores x cross section Part number MLFB Number max. fixed free moving Weight (approx.) kg/km Permissible tensile force max. N free in air (2) in water 1x16 5DK x25 5DK x35 5DK x50 5DK x70 5DK x16 5DK x25 5DK x35 5DK x50 5DK x70 5DK x16 /16 5DK x25 /25 5DK x35 /35 5DK x50 / DK x70 /70 5DK x25 + 3x25/ DK x35 + 3x25/3 5DK x50 + 3x25/3 5DK x70 + 3x35/3 5DK in water: The values are valid for permanent operation with DC or C with 50 up to 60 Hz at 30 C ambient water temperature, two or three cores loaded, multi-core cables all cores loaded (cable compete iersed in water). (2) free in air: The values are valid for permanent operation with DC or C with 50 up to 60 Hz at 30 C ambient temperature, two or three cores loaded, multi-core cables all cores loaded (see also DIN VDE 298-4). MS-TECWTER 27

28 Watertight cables 28

29 DRINKING WTER - CBLES Designation Standard Model Rated Voltage Water temp. max. pprovals HYDROFIRM(T) S07BB-F HYDROFIRM(T) S07BBH2-F HYDROFIRM(T) S1BB-F HYDROFIRM(T) S1BBH2-F HYDROFIRM(T) EMV-FC S1BC4B-F TML based on DIN EN based on DIN EN based on DIN EN based on DIN EN based on DIN EN based on DIN EN round 450/750 V 60 C Elastomerleitlinie (ELL), CS flat 450/750 V 60 C Elastomerleitlinie (ELL), CS round 0.6/1 kv 60 C Elastomerleitlinie (ELL), CS flat 0.6/1 kv 60 C Elastomerleitlinie (ELL), CS round 0.6/1 kv 60 C Elastomerleitlinie (ELL), CS round / flat 0.6/1 kv 60 C Elastomerleitlinie (ELL), CS MS- HYDROFIRM(T) (N)TSW based on DIN VDE round 3.6/6 kv 60 C Elastomerleitlinie (ELL), CS 29

30 HYDROFIRM(T) S07BB-F pplication HYDROFIRM(T) rubber-sheathed cables S07BB-F are intended for connection of electrical equipment in water and for medium mechanical stresses, e.g. submersible pumps, lowering of water level and booster plants. These cables are also suitable for use in drinking water, cooling water, surface water, rainwater. They further can be used in groundwater and seawater (salt water) up to 2000 m water depth. The outer sheath fulfills the requirements of health according to the Elastomerleitlinien (ELL) of the German Umwelt Bundesamt and the ttestation de Conformité Sanitaire (CS) according to the French law. When corrosive water is involved, or water of some other special compositions must be investigated in each individual case. They may not be used in water containing more than 0,5 mg/l of chlorine. These cables can be used indoors, outdoors, in industrial and agricultural plant, but not in explosion-hazard areas. For protected, fixed installation within equipment, pipes or wells, as well as for rotor connections, these cables may be operated with an C voltage to 1000 V or a DC voltage to 750 V with respect to earth. The permissible C voltage for motor tests is 3 kv for a maximum duration of 3 minutes. In other respects the specifications of DIN EN apply. Global data Brand HYDROFIRM (T) Type designation S07BB-F Standard Based on EN Notes on installation Maximum Submersing Depth 2000 Meter Design features Conductor Plain copper, finely stranded class 5 in accordance with DIN EN / IEC Insulation Ozone, water and weather resistant insulation compound, base EPR (Ethylene-Propylene Rubber) Color code up to 5 cores: colored in accordance with DIN VDE more than 5 cores: DIN EN nnex D sheath EPR special compound type EM6 according to DIN EN ; water resistant; Compound 3G357 Sheath Colour Blue Electrical parameters Rated voltage 450/750V Max. permissible operating voltage C 0.476/0.825 kv Max. permissible operating voltage DC 0.619/1.238 kv C Test Voltage 2.5 kv (15 Min.) Chemical parameters Compatibility to drinking water CS - France Compatibility to drinking water ELL - (Elastomerleitlinie of Umwelt Bundesamt) Germany Water resistance DIN EN Thermal parameters Max. permissible temperature at conductor 90 C Max. short circuit temperature of the conductor 250 C Max. permissible water temperature 60 C (t higher water temperatures, a shortened cable service life is to be expected) mbient temperature for fix installation -50 C mbient temp. in fully flex. operation -50 C 30 HYDROFIRM(T)

31 Number of cores x cross section Part number MLFB Number max. fixed free moving Weight (approx.) kg/km Permissible tensile force max. N free in air (2) in water Short Circuit (conductor) k 1x1, DH x6 5DH x DH x DH x DH x DH x DH x DH x DH x DH x DH x DH x DH x DH G DH G DH G DH G DH x1,5 5DH x2, DH x DH x DH x DH x DH x DH x DH x DH x DH x DH x DH G1, DH G2,5 5DH G4 5DH G1, DH G2, DH G DH G DH G DH G DH G DH G DH G DH G DH G DH G DH G DH x2, DH G1,5 5DH x = without ye/gn core; G = with ye/gn core HYDROFIRM(T) 31

32 Number of cores x cross section Part number MLFB Number max. fixed free moving Weight (approx.) kg/km Permissible tensile force max. N free in air (2) in water Short Circuit (conductor) k 7G2, DH G4 5DH in water: The values are valid for permanent operation with DC or C with 50 up to 60 Hz at 30 C ambient water temperature, two or three cores loaded, multi-core cables all cores loaded (cable compete iersed in water). (2) free in air: The values are valid for permanent operation with DC or C with 50 up to 60 Hz at 30 C ambient temperature, two or three cores loaded, multi-core cables all cores loaded (see also DIN VDE 298-4). x = without ye/gn core; G = with ye/gn core 32 HYDROFIRM(T)

33 NOTES PROTOLON(M)-R 6kV: Medium Voltage Reeling HYDROFIRM(T) Technical data, dimensions and weights are 33

34 HYDROFIRM(T) S07BBH2-F pplication HYDROFIRM(T) rubber-sheathed cables S07BBH2-F are intended for connection of electrical equipment in water and for medium mechanical stresses, e.g. submersible pumps, lowering of water level and booster plants. These cables are also suitable for use in drinking water, cooling water, surface water, rainwater. They further can be used in groundwater and seawater (salt water) up to 2000 m water depth. The outer sheath fulfills the requirements of health according to the Elastomerleitlinien (ELL) of the German Umwelt Bundesamt and the ttestation de Conformité Sanitaire (CS) according to the French law. When corrosive water is involved, or water of some other special compositions must be investigated in each individual case. They may not be used in water containing more than 0,5 mg/l of chlorine. These cables can be used indoors, outdoors, in industrial and agricultural plant, but not in explosion-hazard areas. For protected, fixed installation within equipment, pipes or wells, as well as for rotor connections, these cables may be operated with an C voltage to 1000 V or a DC voltage to 750 V with respect to earth. The permissible C voltage for motor tests is 3 kv for a maximum duration of 3 minutes. In other respects the specifications of DIN EN apply. Global data Brand HYDROFIRM (T) Type designation S07BBH2-F Model Flat Standard DIN EN Notes on installation Maximum Submersing Depth 2000 Meter Design features Conductor Plain copper, finely stranded class 5 in accordance with DIN EN / IEC Insulation Ozone, water and weather resistant insulation compound, base EPR (Ethylene-Propylene Rubber) Color code up to 5 cores: colored in accordance with DIN VDE more than 5 cores: DIN EN nnex D sheath EPR special compound type EM6 according to DIN EN ; water resistant; Compound 3G357 Sheath Colour Blue Electrical parameters Rated voltage 450/750V Max. permissible operating voltage C 0.476/0.825 kv Max. permissible operating voltage DC 0.619/1.238 kv C Test Voltage 2.5 kv (15 Min.) Chemical parameters Compatibility to drinking water Water resistance DIN EN ELL - (Elastomerleitlinie of Umwelt Bundesamt) Germany CS - France Thermal parameters Max. permissible temperature at conductor 90 C Max. short circuit temperature of the conductor 250 C Max. permissible water temperature 60 C (t higher water temperatures, a shortened cable service life is to be expected) mbient temperature for fix installation -50 C mbient temp. in fully flex. operation -50 C 34 HYDROFIRM(T)

35 Number of cores x cross section Part number MLFB Number Min. Height (for flat cable) Max. Height (for flat cable) Min. Width (for flat cable) Max. Width (for flat cable) fixed free moving Weight (approx.) kg/km Permissible tensile force max. N free in air (2) in water Short Circuit (conductor) k 3x1, DH x2, DH x DH x DH x DH x DH x DH x DH x DH x DH x DH x DH x240 5DH G1, DH G2, DH G DH G DH G DH G DH G DH G DH G DH G DH G DH G DH (2) free in air: The values are valid for permanent operation with DC or C with 50 up to 60 Hz at 30 C ambient temperature, two or three cores loaded, multi-core cables all cores loaded (see also DIN VDE 298-4). in water: The values are valid for permanent operation with DC or C with 50 up to 60 Hz at 30 C ambient water temperature, two or three cores loaded, multi-core cables all cores loaded (cable compete iersed in water). x = without ye/gn core; G = with ye/gn core HYDROFIRM(T) 35

36 HYDROFIRM(T) S1BB-F pplication HYDROFIRM(T) rubber-sheathed cables S1BB-F are intended for connection of electrical equipment in water and for medium mechanical stresses, e.g. submersible pumps, lowering of water level and booster plants.these cables are also suitable for use in drinking water, cooling water, surface water, rainwater. They further can be used in groundwater and seawater (salt water) up to 2000 m water depth. The outer sheath fulfills the requirements of health according to the Elastomerleitlinien (ELL) of the German Umwelt Bundesamt and the ttestation de Conformité Sanitaire (CS) according to the French law. When corrosive water is involved, or water of some other special compositions must be investigated in each individual case. They may not be used in water containing more than 0,5 mg/l of chlorine. These cables can be used indoors, outdoors, in industrial and agricultural plant, but not in explosion-hazard areas. In other respects the specifications of DIN EN apply. Global data Brand HYDROFIRM (T) Type designation S1BB-F Model Round Standard Based on EN Notes on installation Maximum Submersing Depth 2000 Meter Design features Conductor Plain copper, finely stranded class 5 in accordance with DIN EN / IEC Insulation Ozone, water and weather resistant insulation compound, base EPR (Ethylene-Propylene Rubber) Color code up to 5 cores: colored in accordance with DIN VDE more than 5 cores: DIN EN nnex D sheath EPR special compound type EM6 according to DIN EN ; water resistant; Compound 3G357 Sheath Colour Blue Electrical parameters Rated voltage Max. permissible operating voltage C Max. permissible operating voltage DC C Test Voltage 0.6/1 kv (600/1000V) 0.7/1.2 kv 0.9/1.8 kv 3 kv (15 Min.) Chemical parameters Compatibility to drinking water Water resistance DIN EN CS - France ELL - (Elastomerleitlinie of Umwelt Bundesamt) Germany Thermal parameters Max. permissible temperature at conductor 90 C Max. short circuit temperature of the conductor 250 C Max. permissible water temperature 60 C (t higher water temperatures, a shortened cable service life is to be expected) mbient temperature for fix installation -50 C mbient temp. in fully flex. operation -50 C 36 HYDROFIRM(T)

37 Number of cores x cross section Part number MLFB Number max. fixed free moving Weight (approx.) kg/km Permissible tensile force max. N free in air (2) in water Short Circuit (conductor) k 1x1, DH x2,5 5DH x4 5DH x6 5DH x10 5DH x DH x DH x DH x DH x DH x DH x DH x DH x DH x DH x300 5DH x400 5DH x500 5DH x DH x1,5 5DH x2,5 5DH x DH x6 5DH x10 5DH x16 5DH x25 5DH G1, DH G2, DH G DH x1 5DH x1,5 5DH x2,5 5DH x4 5DH x6 5DH x10 5DH x DH x DH x DH x DH x DH x DH x DH x DH x DH x DH x300 5DH G1 5DH G1, DH x = without ye/gn core; G = with ye/gn core HYDROFIRM(T) 37

38 Number of cores x cross section Part number MLFB Number max. fixed free moving Weight (approx.) kg/km Permissible tensile force max. N free in air (2) in water Short Circuit (conductor) k 4G2, DH G DH G DH G DH G DH G DH G DH G DH G DH G DH G DH G DH G185 5DH G DH G300 5DH (2) free in air: The values are valid for permanent operation with DC or C with 50 up to 60 Hz at 30 C ambient temperature, two or three cores loaded, multi-core cables all cores loaded (see also DIN VDE 298-4). in water: The values are valid for permanent operation with DC or C with 50 up to 60 Hz at 30 C ambient water temperature, two or three cores loaded, multi-core cables all cores loaded (cable compete iersed in water). x = without ye/gn core; G = with ye/gn core 38 HYDROFIRM(T)

39 NOTES PROTOLON(M)-R 6kV: Medium Voltage Reeling HYDROFIRM(T) Technical data, dimensions and weights are 39

40 HYDROFIRM(T) S1BBH2-F pplication HYDROFIRM(T) rubber-sheathed cables S1BBH2-F are intended for connection of electrical equipment in water and for medium mechanical stresses, e.g. submersible pumps, lowering of water level and booster plants. These cables are also suitable for use in drinking water, cooling water, surface water, rainwater. They further can be used in groundwater and seawater (salt water) up to 2000 m water depth. The outer sheath fulfills the requirements of health according to the Elastomerleitlinien (ELL) of the German Umwelt Bundesamt and the ttestation de Conformité Sanitaire (CS) according to the French law. When corrosive water is involved, or water of some other special compositions must be investigated in each individual case. They may not be used in water containing more than 0,5 mg/l of chlorine. These cables can be used indoors, outdoors, in industrial and agricultural plant, but not in explosion-hazard areas. In other respects the specifications of DIN EN apply. Global data Brand HYDROFIRM (T) Type designation S1BBH2-F Model Flat Standard Based on EN Notes on installation Maximum Submersing Depth 2000 Meter Design features Conductor Plain copper, finely stranded class 5 in accordance with DIN EN / IEC Insulation Ozone, water and weather resistant insulation compound, base EPR (Ethylene-Propylene Rubber) Color code up to 5 cores: colored in accordance with DIN VDE more than 5 cores: DIN EN nnex D sheath EPR special compound type EM6 according to DIN EN ; water resistant; Compound 3G357 Sheath Colour Blue Electrical parameters Rated voltage Max. permissible operating voltage C Max. permissible operating voltage DC C Test Voltage 0.6/1 kv (600/1000V) 0.7/1.2 kv 0.9/1.8 kv 3 kv (15 Min.) Chemical parameters Compatibility to drinking water Water resistance DIN EN ELL - (Elastomerleitlinie of Umwelt Bundesamt) Germany CS - France Thermal parameters Max. permissible temperature at conductor 90 C Max. short circuit temperature of the conductor 250 C Max. permissible water temperature 60 C (t higher water temperatures, a shortened cable service life is to be expected) mbient temperature for fix installation -50 C mbient temp. in fully flex. operation -50 C 40 HYDROFIRM(T)

41 Number of cores x cross section Part number MLFB Number Min. Height (for flat cable) Max. Height (for flat cable) Min. Width (for flat cable) Max. Width (for flat cable) fixed free moving Weight (approx.) kg/km Permissible tensile force max. N free in air (2) in water Short Circuit (conductor) k 3x1,5 5DH x2,5 5DH x4 5DH x6 5DH x10 5DH x16 5DH x25 5DH x DH x DH x DH x DH x DH x150 5DH x185 5DH G1,5 5DH G2,5 5DH G DH G DH G DH G DH G DH G DH G DH G DH G DH G120 5DH G150 5DH (2) free in air: The values are valid for permanent operation with DC or C with 50 up to 60 Hz at 30 C ambient temperature, two or three cores loaded, multi-core cables all cores loaded (see also DIN VDE 298-4). in water: The values are valid for permanent operation with DC or C with 50 up to 60 Hz at 30 C ambient water temperature, two or three cores loaded, multi-core cables all cores loaded (cable compete iersed in water). x = without ye/gn core; G = with ye/gn core HYDROFIRM(T) 41

42 HYDROFIRM(T) HYDROFIRM(T) EMC-FC EMV-FC S1BC4B-F S1BC4B-F pplication HYDROFIRM(T) rubber-sheathed cables S1BC4B-F are intended for connection of electrical equipment in water and for medium mechanical stresses, e.g. submersible pumps, lowering of water level and booster plants. Especially for frequency converter controlled C drives and if considerable demands in respect of electromagnetic compatibility (EMC) according to the EMC directive imposes. For an effective shielding both ends of cable must have a good shield contact to ground. These cables are also suitable for use in drinking water, cooling water, surface water, rainwater. They further can be used in groundwater and seawater (salt water) up to 2000 m water depth. The outer sheath fulfills the requirements of health according to the Elastomerleitlinien (ELL) of the German Umwelt Bundesamt and the ttestation de Conformité Sanitaire (CS) according to the French law. When corrosive water is involved, or water of some other special compositions must be investigated in each individual case. They may not be used in water containing more than 0,5 mg/l of chlorine. These cables can be used indoors, outdoors, in industrial and agricultural plant, but not in explosion-hazard areas. In other respects the specifications of DIN EN apply. Global data Brand HYDROFIRM (T) Type designation S1BC4B-F Standard Based on EN Notes on installation Maximum Submersing Depth 2000 Meter Design features Conductor Plain copper, finely stranded class 5 in accordance with DIN EN / IEC Insulation Ozone, water and weather resistant insulation compound, base EPR (Ethylene-Propylene Rubber) Color code up to 5 cores: colored in accordance with DIN VDE more than 5 cores: DIN EN nnex D Screen Braid of tinned copper wires Maximum transfer impedance 30Ω/km at 30MHz sheath EPR special compound type EM6 according to DIN EN : ; water resistant; Compound 3G357 Sheath Colour Blue Electrical parameters Rated voltage Max. permissible operating voltage C Max. permissible operating voltage DC C Test Voltage 0.6/1 kv (600/1000V) 0.7/1.2 kv 0.9/1.8 kv 5 kv (5 Min.) Chemical parameters Compatibility to drinking water Water resistance DIN EN ELL - (Elastomerleitlinie of Umwelt Bundesamt) Germany CS - France Thermal parameters Max. permissible temperature at conductor 90 C Max. short circuit temperature of the conductor 250 C Max. permissible water temperature 60 C (t higher water temperatures, a shortened cable service life is to be expected) mbient temperature for fix installation -50 C mbient temp. in fully flex. operation -50 C 42 HYDROFIRM(T) EMC-FC

43 Number of cores x cross section Part number MLFB Number max. fixed free moving Weight (approx.) kg/km Permissible tensile force max. N free in air (2) in water Short Circuit (conductor) k 3x1,5/1,5 KON 5DH x2,5/2,5 KON DH x4/4 KON DH x6/6 KON DH x10/10 KON 5DH x16/16 KON DH x25+3G16/3 5DH x35+3G16/ DH x50+3G25/ DH x70+3G35/ DH x95+3G50/ DH x120+3G70/ DH in water: The values are valid for permanent operation with DC or C with 50 up to 60 Hz at 30 C ambient water temperature, two or three cores loaded, multi-core cables all cores loaded (cable compete iersed in water). (2) free in air: The values are valid for permanent operation with DC or C with 50 up to 60 Hz at 30 C ambient temperature, two or three cores loaded, multi-core cables all cores loaded (see also DIN VDE 298-4). HYDROFIRM(T) EMC-FC 43

44 TML TML round round type B type - 0,6/1 B kv pplication TML rubber-sheathed cables are intended for connection of electrical equipment in water and for medium mechanical stresses, e.g. submersible pumps, lowering of water level and booster plants. These cables are also suitable for use in drinking water, cooling water, surface water, ainwater. They further can be used in groundwater and seawater (salt water) up to 2000 m water depth. The outer sheath fulfills the requirements of health according to the Elastomerleitlinien (ELL) of the German Umwelt Bundesamt and the ttestation de Conformité Sanitaire (CS) according to the French law. When corrosive water is involved, or water of some other special compositions must be investigated in each individual case. They may not be used in water containing more than 0,5 mg/l of chlorine. These cables can be used indoors, outdoors, in industrial and agricultural plant, but not in explosion-hazard areas. In other respects the specifications of DIN EN apply. Global data Brand TML Model Round Standard Based on EN Notes on installation Maximum Submersing Depth 2000 Meter Design features Conductor plain annealed copper, flexible class 5 acc. to DIN EN / IEC Insulation Ozone, water and weather resistant insulation compound, base EPR (Ethylene-Propylene Rubber) Color code up to 5 cores: colored in accordance with DIN VDE more than 5 cores: DIN EN nnex D sheath EPR special compound type EM6 according to DIN EN ; water resistant; Compound 3G357 Sheath Colour Blue Electrical parameters Rated voltage Max. permissible operating voltage C Max. permissible operating voltage DC C Test Voltage 0.6/1 kv (600/1000V) 0.7/1.2 kv 0.9/1.8 kv 3 kv (5 Min.) Chemical parameters Compatibility to drinking water Water resistance EN CS - France ELL - (Elastomerleitlinie of Umwelt Bundesamt) Germany Thermal parameters Max. permissible temperature at conductor 90 C Max. short circuit temperature of the conductor 250 C Max. permissible water temperature 60 C (t higher water temperatures, a shortened cable service life is to be expected) mbient temperature for fix installation -40 C mbient temp. in fully flex. operation -25 C Mechanical parameters Min. bending cc. to DIN VDE 0298 part 3 44 TML round type B

45 Number of cores x cross section Part number nom. fixed free moving Weight (approx.) kg/km Permissible tensile force max. N free in air (2) in water Short Circuit (conductor) k 1x1, x2, x x x x x x x x x x x x x x0, x1, x2, x x x x x x x G1, G2, G G G G G G G G (2) free in air: The values are valid for permanent operation with DC or C with 50 up to 60 Hz at 30 C ambient temperature, two or three cores loaded, multi-core cables all cores loaded (see also DIN VDE 298-4). in water: The values are valid for permanent operation with DC or C with 50 up to 60 Hz at 30 C ambient water temperature, two or three cores loaded, multi-core cables all cores loaded (cable compete iersed in water). x = without ye/gn core; G = with ye/gn core TML round type B 45

46 TML flat type B TML flat type B pplication TML rubber-sheathed cables are intended for connection of electrical equipment in water and for medium mechanical stresses, e.g. submersible pumps, lowering of water level and booster plants. These cables are also suitable for use in drinking water, cooling water, surface water, ainwater. They further can be used in groundwater and seawater (salt water) up to 2000 m water depth. The outer sheath fulfills the requirements of health according to the Elastomerleitlinien (ELL) of the German Umwelt Bundesamt and the ttestation de Conformité Sanitaire (CS) according to the French law. When corrosive water is involved, or water of some other special compositions must be investigated in each individual case. They may not be used in water containing more than 0,5 mg/l of chlorine. These cables can be used indoors, outdoors, in industrial and agricultural plant, but not in explosion-hazard areas. In other respects the specifications of DIN EN apply. Global data Brand TML Model Flat Standard Based on EN Notes on installation Maximum Submersing Depth 2000 Meter Design features Conductor Plain copper, finely stranded class 5 in accordance with DIN EN / IEC Insulation Ozone, water and weather resistant insulation compound, base EPR (Ethylene-Propylene Rubber) Color code up to 5 cores: colored in accordance with DIN VDE more than 5 cores: DIN EN nnex D sheath EPR special compound type EM6 according to DIN EN ; water resistant; Compound 3G357 Sheath Colour Blue Electrical parameters Rated voltage Max. permissible operating voltage C Max. permissible operating voltage DC C Test Voltage 0.6/1 kv (600/1000V) 0.7/1.2 kv 0.9/1.8 kv 3 kv (5 Min.) Chemical parameters Compatibility to drinking water Water resistance DIN EN ELL - (Elastomerleitlinie of Umwelt Bundesamt) Germany CS - France Thermal parameters Max. permissible temperature at conductor 90 C Max. short circuit temperature of the conductor 250 C Max. permissible water temperature 60 C (t higher water temperatures, a shortened cable service life is to be expected) mbient temperature for fix installation -40 C mbient temp. in fully flex. operation -25 C 46 TML flat type B

47 Number of cores x cross section Part number Min. Height (for flat cable) Max. Height (for flat cable) Min. Width (for flat cable) Max. Width (for flat cable) Weight (approx.) kg/km Permissible tensile force max. N free in air (2) in water Short Circuit (conductor) k 3G1, x1, x2, x x x x x x x G1, G2, G G G G G G in water: The values are valid for permanent operation with DC or C with 50 up to 60 Hz at 30 C ambient water temperature, two or three cores loaded, multi-core cables all cores loaded (cable compete iersed in water). (2) free in air: The values are valid for permanent operation with DC or C with 50 up to 60 Hz at 30 C ambient temperature, two or three cores loaded, multi-core cables all cores loaded (see also DIN VDE 298-4). x = without ye/gn core; G = with ye/gn core TML flat type B 47

48 POTFLEX pplication: Power cable for submersible potable water pumps Designed for outdoor use Suitable for permanent submersion in water for water depths up to 150 meters pplication: Power cable for submersible potable water pumps Designed for outdoor use Suitable for permanent submersion in water for water depths up to 150 meters Properties: Safe for drinking water application Lead free Halogen free polyethylene water impermeable outer sheath Cons Cond Insu Stra Oute Wire 3 co 4 co Elec Nom Test Global data Construction: Conductor: bare stranded copper Class 5 Insulation: Stranding: sheath: Construction: Wire colors: poly vinyl chloride (PVC) 3 or 4 cores polyethylene (PE) Conductor: 3 cores: green/yellow, bare stranded blue, copper brown Class 5 Insulation: 4 cores: green/yellow, poly vinyl brown, chloride black, (PVC) grey Stranding: 3 or 4 cores Standards / references: KTW certificate including W270 for contact with drinking sheath: polyethylene (PE) 3 cores: green/yellow, blue, brown Wire Global pplication colors: data Properties: 4 cores: green/yellow, brown, black, grey 3 HYDROFIRM(T) cores: green/yellow, rubber-sheathed blue, cables brown S1BB-F are intended for connection of electrical equipment in water and for medium mechanical stresses, e.g. Safe submersible for drinking pumps, water lowering application of water level and booster plants.these cables are also suitable for use in drinking water, cooling water, surface 4 water, cores: rainwater. green/yellow, They further brown, can be used black, in groundwater grey and seawater (salt water) up to 2000 m water depth. The outer sheath fulfills the requirements Lead free of health according to the Elastomerleitlinien (ELL) of the German Electrical Umwelt properties: Bundesamt and the ttestation de Conformité Sanitaire Halogen (CS) free according polyethylene to the French water law. impermeable When corrosive outer water is involved, or water of some other special compositions must be investigated in Nominal voltage: 0,6/1 kv Electrical each individual properties: case. They may not be used in water containing more than 0,5 mg/l of chlorine. These sheath cables can be used indoors, outdoors, in industrial and agricultural plant, Test but voltage: not in explosion-hazard areas. 3,5 kv Nominal voltage: 0,6/1 kv In other respects the specifications of DIN EN apply. Test voltage: 3,5 kv water HYDROFIRM(T) S1BB-F Marking example: DRK 08 POTFLEX DRINKING WTER CBLE 0,6/1kV 3G1,5MM² Fire Halo Low Self- Flam Othe Mini Max Envi Shea pp Deli Global data Fire Brandproperties: HYDROFIRM (T) Type designation S1BB-F Halogen free: No Model Round Low Standard smoke: Based on EN No Self-extinguishing acc. IEC : No Flame Notes on retardant installation acc. IEC : Maximum Submersing Depth 2000 Meter No Other properties: Minimum Design features installation temperature: 0 C Conductor Plain copper, finely stranded class 5 in accordance with DIN EN / IEC Maximum conductor temperature: +70 C Insulation Ozone, water and weather resistant insulation compound, base EPR (Ethylene-Propylene Environment temperature: -40 C, Rubber) max. +50 C 1 / 2 Color code up to 5 cores: colored in accordance with DIN VDE Sheath color: pprovals: sheath bright blue more than 5 cores: DIN EN nnex D EPR KTW special approval compound type EM6 according to DIN EN ; water resistant; Compound Delivery: 3G357 Sheath Colour Blue reels Electrical parameters Rated voltage Max. permissible operating voltage C Max. permissible operating voltage DC C Test Voltage 0.6/1 kv (600/1000V) 0.7/1.2 kv 0.9/1.8 kv 3 kv (15 Min.) Chemical parameters MS-HYDROFIRM(T) 48 Prysmian Kabel POTFLEX und Systeme GmbH ROUND Technical data, dimensions and weights are Compatibility to drinking water CS - France ELL - (Elastomerleitlinie of Umwelt Bundesamt) Germany Water resistance DIN EN

49 POTFLEX ROUND MS-HYDROFIRM(T) Prysmian Kabel und Systeme GmbH Technical data, dimensions and weights are 49

50 MS-HYDROFIRM(T) (N)TSW pplication MS- HYDROFIRM(T) rubber-sheathed cables (N)TSW are intended for connection of electrical equipment in water and for medium mechanical stresses, e.g. submersible pumps, lowering of water level and booster plants. These cables are also suitable for use in drinking water, cooling water, surface water, rainwater. They further can be used in groundwater and seawater (salt water) up to 2000 m water depth. The outer sheath fulfills the requirements of health according to the Elastomerleitlinien (ELL) of the German Umwelt Bundesamt and the ttestation de Conformité Sanitaire (CS) according to the French law. When corrosive water is involved, or water of some other special compositions must be investigated in each individual case. They may not be used in water containing more than 0,5 mg/l of chlorine. These cables can be used indoors, outdoors, in industrial and agricultural plant, but not in explosion-hazard areas. In other respects the specifications of DIN VDE apply. Global data Brand HYDROFIRM (T) Type designation (N)TSW Standard DIN VDE Based on DIN VDE Notes on installation Maximum Submersing Depth 2000 Meter Design features Conductor Plain copper, finely stranded class 5 in accordance with DIN EN / IEC Insulation Ozone, water and weather resistant insulation compound, base EPR (Ethylene-Propylene Rubber) Electrical field control Inner layer of semiconductive rubber compound Color code Power cores: light color with black numbering; PE core: green-yellow sheath EPR special compound type EM6 according to DIN EN ; water resistant; Compound 3G357 Sheath Colour Blue Electrical parameters Rated voltage Max. permissible operating voltage C Max. permissible operating voltage DC C Test Voltage 3.6/6 kv 4.2/7.2 kv 5.4/10.8 kv 11 kv (5 Min.) Chemical parameters Compatibility to drinking water Water resistance DIN EN ELL - (Elastomerleitlinie of Umwelt Bundesamt) Germany CS - France Thermal parameters Max. permissible temperature at conductor 90 C Max. short circuit temperature of the conductor 250 C Max. permissible water temperature 60 C (t higher water temperatures, a shortened cable service life is to be expected) mbient temperature for fix installation -40 C mbient temp. in fully flex. operation -25 C 50 MS-HYDROFIRM(T)

51 Number of cores x cross section Part number MLFB Number max. fixed free moving Weight (approx.) kg/km Permissible tensile force max. N free in air (2) in water Short Circuit (conductor) k 1x16 5DK x25 5DK x35 5DK x50 5DK x70 5DK x16 5DK x25 5DK x35 5DK x50 5DK x70 5DK x16/16 5DK x25/ DK x35/35 5DK x50/50 5DK x70/70 5DK x25+3x25/3 5DK x35+3x25/3 5DK x50+3x25/3 5DK x70+3x35/3 5DK (2) free in air: The values are valid for permanent operation with DC or C with 50 up to 60 Hz at 30 C ambient temperature, two or three cores loaded, multi-core cables all cores loaded (see also DIN VDE 298-4). in water: The values are valid for permanent operation with DC or C with 50 up to 60 Hz at 30 C ambient water temperature, two or three cores loaded, multi-core cables all cores loaded (cable compete iersed in water). MS-HYDROFIRM(T) 51

52 Watertight cables 52