CO 2 laser consumables Precitec. Page 1

Transcription

1 CO 2 laser consumables Page 1

2 Paardenkerkhofstraat 56 B-2800 Mechelen Tel Fax ACCESSORIES POS Talas CODE ORIGINAL CODE DESCRIPTION AL1100 LASER CO² GLASSES CE APPROVED AL LASER ECO CO² GLASSES CE APPROVED kW AL LASER PROTECTOR CO² GLASSES CE APPROVED kW AL LASER PROTECTOR CO² GLASSES CE APPROVED kW GLADIATOR LASER OVERGLASSES CO² LIGHT VERSION 80g OVERSPEC LASER OVERGLASSES CO² VERSION W AL LENS CLEANING LIQUID - ml 200 AL1001/L LENS CLEANING LIQUID - ml 1000 AL LENS CLEANING POLISH - ml 100 AL LENS CLEANING POLISH - ml 200 AL1004 POLISH DETERGENT AL1010 DROPPER FOR LENS CLEANING LIQUID AL1120 LATEX GLOVES - 10 pieces ALI115 INDIUM WIRE Ø 1.0mm FOR 1.5" LENS ALI115/M MAZAK INDIUM 0.8mm FOR 1.5" MAZAK LENS ALI120 INDIUM WIRE Ø 1.0mm FOR Ø 2.0mm LENS ALI120/M MAZAK INDIUM 0,8mm FOR 2,0" LENS SC50 LENS CLEANING PAPER - 75x135-50sheets SC100 KODAK LENS CLEANING PAPER - 70x120-50sheets SC105 LENS CLEANING PAPER - 100x105-50sheets SC20 COTTON SWAB -20 pieces AL1115 LENS CLEANING PRE-CUT COTTON pieces AL SCALE LUPE AL271 BASE FOR LENS MAINTENANCE FOR 1,5" & 2,0" LENS AL282 INJECTOR Lens Cleaning Holder 1.5" with Polarisors Lens Cleaning Holder 2.0" with Polarisors Lens Cleaning Kit EZ Clean Wipes for Easy Lens Cleaning/ 24Pack Page 2

3 Page 3

4 1 2 AKK52 AKH27 YH27 YR30 Sensor system PT , P L405 Nozzle 0.8 mm 1 PT X , P L30405 Nozzle 0.8 mm (10 pack) 10 PT , P L406 Nozzle 1.0 mm 1 PT X , P L30406 Nozzle 1.0 mm (10 pack) 10 PT , L404 Nozzle 1.2 mm 1 PT X , L30404 Nozzle 1.2 mm (10 pack) 10 PT , L407 Nozzle 1.5 mm 1 PT X , L30407 Nozzle 1.5 mm (10 pack) 10 PT P L408 Nozzle 2.0 mm 1 PT X P L30408 Nozzle 2.0 mm (10 pack) 10 PT Nozzle 2.5 mm 1 PT CP , P L405X Nozzle 0.8 mm CP 1 PT CPX , P L30405X Nozzle 0.8 mm CP (10 pack) 10 PT CP , P L406X Nozzle 1.0 mm CP 1 PT CPX , P L30406X Nozzle 1.0 mm CP (10 pack) 10 PT CP , , P L404X Nozzle 1.2 mm CP 1 PT CPX , L30404X Nozzle 1.2 mm CP (10 pack) 10 PT CP , L407X Nozzle 1.5 mm CP 1 PT CPX , L30407X Nozzle 1.5 mm CP (10 pack) 10 PT CP P L408X Nozzle 2.0 mm CP 1 PT CPX P L30408X Nozzle 2.0 mm CP (10 pack) 10 YK52 Sensor system PT , PO L800 Nozzle 1.0 mm 1 PT X , PO L30800 Nozzle 1.0 mm (10 pack) 10 PT P L801 Nozzle 1.2 mm 1 PT X P L30801 Nozzle 1.2 mm (10 pack) 10 PT , P L802 Nozzle 1.5 mm 1 PT X , P L30802 Nozzle 1.5 mm (10 pack) 10 PT , P L803 Nozzle 1.8 mm 1 PT X , P L30803 Nozzle 1.8 mm (10 pack) 10 PT , P L804 Nozzle 2.0 mm 1 PT X , P L30804 Nozzle 2.0 mm (10 pack) 10 PT P L805 Nozzle 2.5 mm 1 PT X P L30805 Nozzle 2.5 mm (10 pack) 10 Page 4

5 For Adige, Durma, Ermaksan, Finn Power, GHT, Hans, Mazak, SHT and Salvagnini systems PT P AL355 Nozzle holder OEM KT B2" 1 1 PT Recommended P AL495 Nozzle holder KT B2 Con 1 PT P AL380 Nozzle holder KT B2 Con 1 PT Recommended , P AL131 Nozzle holder ceramic 1 2 PT P AL421 Nozzle holder KT B2 Cyl 1 PT OEM , P AL23 Nozzle holder ceramic (OEM) 1 3 PT C P AL331 Nozzle holder ceramic 1 4 PT AL228 Nozzle holder 1 5 PT , P AL141 Nozzle holder IT B2" Z aluminum 1 PT , P L247 Nozzle 0.8 mm 1 PT X , P L30247 Nozzle 0.8 mm (10 pack) 10 PT , P L162 Nozzle 1.0 mm 1 PT X , P L30162 Nozzle 1.0 mm (10 pack) 10 PT , P L130 Nozzle 1.2 mm 1 PT X , P L30130 Nozzle 1.2 mm (10 pack) 10 PT , P L131 Nozzle 1.5 mm 1 PT X , P L30131 Nozzle 1.5 mm (10 pack) 10 PT L248 Nozzle 1.7 mm 1 PT X L30248 Nozzle 1.7 mm (10 pack) 10 PT , P L153 Nozzle 1.8 mm 1 PT X , P L30153 Nozzle 1.8 mm (10 pack) 10 PT , P L132 Nozzle 2.0 mm 1 PT X , P L30132 Nozzle 2.0 mm (10 pack) 10 PT L154 Nozzle 2.3 mm 1 6 PT X L30154 Nozzle 2.3 mm (10 pack) 10 PT , P L155 Nozzle 2.5 mm 1 PT X , P L30155 Nozzle 2.5 mm (10 pack) 10 PT L249 Nozzle 2.7 mm 1 PT X L30249 Nozzle 2.7 mm (10 pack) 10 PT L156 Nozzle 3.0 mm 1 PT X L30156 Nozzle 3.0 mm (10 pack) 10 PT CP , P L247X Nozzle 0.8 mm CP 1 PT CPX , P L30247X Nozzle 0.8 mm CP (10 pack) 10 PT CP , P L162X Nozzle 1.0 mm CP 1 PT CPX , P L30162X Nozzle 1.0 mm CP (10 pack) 10 PT CP , P L130X Nozzle 1.2 mm CP 1 PT CPX , P L30130X Nozzle 1.2 mm CP (10 pack) 10 PT CP , P L131X Nozzle 1.5 mm CP 1 PT CPX , P L30131X Nozzle 1.5 mm CP (10 pack) 10 PT CP L248X Nozzle 1.7 mm CP 1 PT CPX L30248X Nozzle 1.7 mm CP (10 pack) 10 Page 5

6 PT CP , P L153X Nozzle 1.8 mm CP 1 PT CPX , P L30153X Nozzle 1.8 mm CP (10 pack) 10 PT CP , P L132X Nozzle 2.0 mm CP 1 PT CPX , P L30132X Nozzle 2.0 mm CP (10 pack) 10 PT CP L154X Nozzle 2.3 mm CP 1 6 PT CPX L30154X Nozzle 2.3 mm CP (10 pack) 10 PT CP , P L155X Nozzle 2.5 mm CP 1 PT CPX , P L30155X Nozzle 2.5 mm CP (10pack) 10 PT CP L249X Nozzle 2.7 mm CP 1 PT CPX L30249X Nozzle 2.7 mm CP (10 pack) 10 PT CP L156X Nozzle 3.0 mm CP 1 PT CPX L30156X Nozzle 3.0 mm CP (10 pack) 10 Page 6

7 For Adige, Durma, Ermaksan, Finn Power, GHT and Salvagnini systems PT L935 Nozzle 0.8 mm HD 1 PT X L30935 Nozzle 0.8 mm HD (10 pack) 10 PT , P L234 Nozzle 1.0 mm HD 1 PT X L30234 Nozzle 1.0 mm HD (10 pack) 10 PT , P L235 Nozzle 1.2 mm HD 1 PT X L30235 Nozzle 1.2 mm HD (10 pack) 10 PT , P L236 Nozzle 1.5 mm HD 1 PT X L30236 Nozzle 1.5 mm HD (10 pack) 10 PT P L237 Nozzle 1.8 mm HD 1 PT X L30237 Nozzle 1.8 mm HD (10 pack) 10 PT , P L238 Nozzle 2.0 mm HD 1 PT X L30238 Nozzle 2.0 mm HD (10 pack) 10 PT L239 Nozzle 2.3 mm HD 1 PT X L30239 Nozzle 2.3 mm HD (10 pack) 10 PT , P L240 Nozzle 2.5 mm HD 1 PT X L30240 Nozzle 2.5 mm HD (10 pack) 10 PT L936 Nozzle 2.75 mm HD 1 PT X L30936 Nozzle 2.75 mm HD (10 pack) 10 PT L241 Nozzle 3.0 mm HD 1 PT X L30241 Nozzle 3.0 mm HD (10 pack) 10 PT L826 Nozzle 3.2 mm HD 1 PT X L30826 Nozzle 3.2 mm HD (10 pack) 10 1 PT L827 Nozzle 3.5 mm HD 1 PT X L30827 Nozzle 3.5 mm HD (10 pack) 10 PT L828 Nozzle 4.0 mm HD 1 PT X L30828 Nozzle 4.0 mm HD (10 pack) 10 PT L829 Nozzle 4.5 mm HD 1 PT X L30829 Nozzle 4.5 mm HD (10 pack) 10 PT L830 Nozzle 5.0 mm HD 1 PT X L30830 Nozzle 5.0 mm HD (10 pack) 10 PT CP L935X Nozzle 0.8 mm HD CP 1 PT CPX L30935X Nozzle 0.8 mm HD CP (10 pack) 10 PT CP , P L234X Nozzle 1.0 mm HD CP 1 PT CPX , P L30234X Nozzle 1.0 mm HD CP (10 pack) 10 PT CP , P L235X Nozzle 1.2 mm HD CP 1 PT CPX , P L30235X Nozzle 1.2 mm HD CP (10 pack) 10 PT CP , P L236X Nozzle 1.5 mm HD CP 1 PT CPX , P L30236X Nozzle 1.5 mm HD CP (10 pack) 10 PT CP L237X Nozzle 1.8 mm HD CP 1 PT CPX L30237X Nozzle 1.8 mm HD CP (10 pack) 10 PT CP , P L238X Nozzle 2.0 mm HD CP 1 PT CPX , P L30238X Nozzle 2.0 mm HD CP (10 pack) 10 PT CP L239X Nozzle 2.3 mm HD CP 1 PT CPX L30239X Nozzle 2.3 mm HD CP (10 pack) 10 PT CP , P L240X Nozzle 2.5 mm HD CP 1 PT CPX , P L30240X Nozzle 2.5 mm HD CP (10 pack) 10 Page 7

8 PT CP L936X Nozzle 2.75 mm HD CP 1 PT CPX L30936X Nozzle 2.75 mm HD CP (10 pack) 10 PT CP L241X Nozzle 3.0 mm HD CP 1 PT CPX L30241X Nozzle 3.0 mm HD CP (10 pack) 10 PT CP L826X Nozzle 3.2 mm HD CP 1 PT CPX L30826X Nozzle 3.2 mm HD CP (10 pack) 10 1 PT CP L827X Nozzle 3.5 mm HD CP 1 PT CPX L30827X Nozzle 3.5 mm HD CP (10 pack) 10 PT CP L828X Nozzle 4.0 mm HD CP 1 PT CPX L30828X Nozzle 4.0 mm HD CP (10 pack) 10 PT CP L829X Nozzle 4.5 mm HD CP 1 PT CPX L30829X Nozzle 4.5 mm HD CP (10 pack) 10 PT CP L830X Nozzle 5.0 mm HD CP 1 PT CPX L30830X Nozzle 5.0 mm HD CP (10 pack) 10 PT L1701 Nozzle 1.5 mm double 1 PT L1702 Nozzle 2.0 mm double 1 PT L1703 Nozzle 2.5 mm double 1 2 PT L1704 Nozzle 3.0 mm double 1 PT L1705 Nozzle 3.5 mm double 1 PT L1706 Nozzle 4.0 mm double 1 PT L1707 Nozzle 4.5 mm double 1 3 PT L1692 Nozzle 4.0 mm 1 PT L1696 Nozzle 5.0 mm 1 4 PT L1693 Nozzle 4.0 mm 1 PT L1697 Nozzle 5.0 mm 1 Page 8

9 For Adige, Durma, Ermaksan, Finn Power, GHT and Salvagnini systems PT design L669 Nozzle 0.8 mm double 1 PT X design L30669 Nozzle 0.8 mm double (10 pack) 10 PT design L691 Nozzle 0.9 mm double 1 PT X design L30691 Nozzle 0.9 mm double (10 pack) 10 PT design L660 Nozzle 1.0 mm double 1 PT X design L30660 Nozzle 1.0 mm double (10 pack) 10 PT design L Nozzle 1.2 mm double w/1.2 mm inner 1 PT X design L Nozzle 1.2 mm double w/1.2 mm inner (10 pack) 10 PT design L661 Nozzle 1.2 mm double 1 PT X design L30661 Nozzle 1.2 mm double (10 pack) 10 PT design L662 Nozzle 1.5 mm double 1 PT X design L30662 Nozzle 1.5 mm double (10 pack) 10 PT design L663 Nozzle 1.8 mm double 1 PT X design L30663 Nozzle 1.8 mm double (10 pack) 10 PT design L664 Nozzle 2.0 mm double 1 PT X design L30664 Nozzle 2.0 mm double (10 pack) 10 PT design L Nozzle 2.0 mm double w/1.8 mm inner 1 PT X design L Nozzle 2.0 mm double w/1.8 mm inner (10 pack) 10 PT design L Nozzle 2.0 mm w/ 2.0 inner double 1 PT X design L Nozzle 2.0 mm w/ 2.0 inner double (10 pack) 10 1 PT X design L Nozzle 2.5 mm w/ 2.0 inner double (10 pack) 10 PT design L Nozzle 3.0 mm w/ 2.0 inner double 1 PT X design L Nozzle 3.0 mm w/ 2.0 inner double (10 pack) 10 PT design L665 Nozzle 2.3 mm double 1 PT X design L30665 Nozzle 2.3 mm double (10 pack) 10 PT design L666 Nozzle 2.5 mm double 1 PT X design L30666 Nozzle 2.5 mm double (10 pack) 10 PT design L667 Nozzle 3.0 mm double 1 PT X design L30667 Nozzle 3.0 mm double (10 pack) 10 PT design L668 Nozzle 3.5 mm double 1 PT X design L30668 Nozzle 3.5 mm double (10 pack) 10 PT CP design L669X Nozzle 0.8 mm double CP 1 PT CPX design L30669X Nozzle 0.8 mm double CP (10 pack) 10 PT CP design L691X Nozzle 0.9 mm double CP 1 PT CPX design L30691X Nozzle 0.9 mm double CP (10 pack) 10 PT CP design L660X Nozzle 1.0 mm double CP 1 PT CPX design L30660X Nozzle 1.0 mm double CP (10 pack) 10 PT CP design L661X Nozzle 1.2 mm double CP 1 PT CPX design L30661X Nozzle 1.2 mm double CP (10 pack) 10 PT design L692 Nozzle 1.1 mm double 1 PT X design L30692 Nozzle 1.1 mm double (10 pack) 10 Page 9

10 PT CP L692X Nozzle 1.1 mm double CP 1 PT CPX L30692X Nozzle 1.1 mm double CP (10 pack) 10 PT CP design L662X Nozzle 1.5 mm double CP 1 PT CPX design L30662X Nozzle 1.5 mm double CP (10 pack) 10 PT CP design L663X Nozzle 1.8 mm double CP 1 PT CPX design L30663X Nozzle 1.8 mm double CP (10 pack) 10 PT CP design L664X Nozzle 2.0 mm double CP 1 PT CPX design L30664X Nozzle 2.0 mm double CP (10 pack) 10 PT CP design L665X Nozzle 2.3 mm double CP 1 PT CPX design L30665X Nozzle 2.3 mm double CP (10 pack) 10 PT CP design L666X Nozzle 2.5 mm double CP 1 PT CPX design L30666X Nozzle 2.5 mm double CP (10 pack) 10 PT CP design L667X Nozzle 3.0 mm double CP 1 1 PT CPX design L30667X Nozzle 3.0 mm double CP (10 pack) 10 PT CP design L668X Nozzle 3.5 mm double CP 1 PT CPX design L30668X Nozzle 3.5 mm double CP (10 pack) 10 PT design L840 Nozzle 4.0 mm double 1 PT X design L30840 Nozzle 4.0 mm double (10 pack) 10 PT CP design L840X Nozzle 4.0 mm double CP 1 PT CPX design L30840X Nozzle 4.0 mm double CP (10 pack) 10 PT design L841 Nozzle 4.5 mm double 1 PT X design L30841 Nozzle 4.5 mm double (10 pack) 10 PT CP design L841X Nozzle 4.5 mm double CP 1 PT CPX design L30841X Nozzle 4.5 mm double CP (10 pack) 10 PT design L861 Nozzle 5.0 mm double 1 PT X design L30861 Nozzle 5.0 mm double (10 pack) 10 PT CP design L861X Nozzle 5.0 mm double CP 1 PT CPX design L30861X Nozzle 5.0 mm double CP (10 pack) 10 PT L1348 Nozzle 0.8 mm 3D double 1 PT L1349 Nozzle 1.0 mm 3D double 1 PT L1350 Nozzle 1.2 mm 3D double 1 PT L1351 Nozzle 1.5 mm 3D double 1 2 PT L1470 Nozzle 1.8 mm 3D double 1 PT CP L1348X Nozzle 0.8 mm 3D double CP 1 PT CP L1349X Nozzle 1.0 mm 3D double CP 1 PT CP L1350X Nozzle 1.2 mm 3D double CP 1 PT CP L1351X Nozzle 1.5 mm 3D double CP 1 PT CP L1470X Nozzle 1.8 mm 3D double CP 1 PT design L738 Nozzle 1.0 mm HD 1 3 PT design L739 Nozzle 1.25 mm HD 1 PT design L740 Nozzle 1.5 mm HD 1 PT design L792 Nozzle 0.8 mm 1 PT design L793 Nozzle 1.0 mm 1 4 PT design L794 Nozzle 1.25 mm 1 PT design L742 Nozzle 1.5 mm 1 PT design L743 Nozzle 1.8 mm 1 PT design L744 Nozzle 2.0 mm 1 Page 10

11 For Adige, Finn Power and GHT systems PT design L680 Nozzle 1.0 mm double long 1 PT design L681 Nozzle 1.2 mm double long 1 PT design L682 Nozzle 1.5 mm double long 1 PT design L683 Nozzle 1.8 mm double long 1 1 PT design L684 Nozzle 2.0 mm double long 1 PT design L685 Nozzle 2.3 mm double long 1 PT design L686 Nozzle 2.5 mm double long 1 PT design L687 Nozzle 3.0 mm double long 1 PT design L688 Nozzle 3.5 mm double long 1 PT P L308 Nozzle 1.0 mm long 1 PT P L307 Nozzle 1.2 mm long 1 PT P L382 Nozzle 1.5 mm long 1 2 PT L383 Nozzle 1.8 mm long 1 PT P L437 Nozzle 2.0 mm long 1 PT P L438 Nozzle 2.3 mm long 1 PT P L439 Nozzle 2.5 mm long 1 PT L440 Nozzle 3.0 mm long 1 PT L1341 Nozzle 1.0 mm long 1 3 PT L1343 Nozzle 1.5 mm long 1 PT L1344 Nozzle 1.8 mm long 1 PT L1345 Nozzle 2.0 mm long 1 PT P L1374 Nozzle 1.0 mm long w/radius 1 PT P L1375 Nozzle 1.2 mm long w/radius 1 PT P L1376 Nozzle 1.5 mm long w/radius 1 PT P L1373 Nozzle 1.8 mm long w/radius 1 PT P L1377 Nozzle 2.0 mm long w/radius 1 4 PT P L1378 Nozzle 2.5 mm long w/radius 1 PT CP L1374X Nozzle 1.0 mm long w/radius CP 1 PT CP L1375X Nozzle 1.2 mm long w/radius CP 1 PT CP L1376X Nozzle 1.5 mm long w/radius CP 1 PT CP L1373X Nozzle 1.8 mm long w/radius CP 1 PT CP L1377X Nozzle 2.0 mm long w/radius CP 1 PT CP L1378X Nozzle 2.5 mm long w/radius CP 1 Page 11

12 For Adige, Finn Power and GHT systems 1 PT AL333 Nozzle adapter L 29 M8 1 2 PT AL334 Nozzle adapter L 30 M6 1 3 PT AL335 Nozzle adapter L 20 M6 1 4 PT design AL43 Nozzle adapter 1 Replacement parts suitable for: For Koike systems 1 PT OEM , P AL23 Nozzle holder KT B2 OEM 1 PT Recommended , P AL131 Nozzle holder KT B2 1 2 PT P AL355 Nozzle holder KT B2 CON OEM 1 3 PT L1547 Inner nozzle 1.9 mm 1 4 PT AL415 Outer nozzle 8.0 mm 1 5 PT L1595 Inner nozzle 1.7 mm 1 6 PT AL427 Outer nozzle 6.0 mm 1 7 PT AL414 Outer nozzle 7.0 mm 1 8 PT L1545 Inner nozzle 1.9 mm 1 Page 12

13 For Adige, Durma, Ermaksan, Finn Power, GHT, Hans, Mazak, SHT and Salvagnini systems PT design L1179 Nozzle 1.0 mm double 1 PT design L1180 Nozzle 1.5 mm double 1 PT design L1181 Nozzle 2.0 mm double 1 PT design L1182 Nozzle 2.5 mm double 1 1 PT design L1183 Nozzle 3.0 mm double 1 PT CP design L1179X Nozzle 1.0 mm double CP 1 PT CP design L1180X Nozzle 1.5 mm double CP 1 PT CP design L1181X Nozzle 2.0 mm double CP 1 PT CP design L1182X Nozzle 2.5 mm double CP 1 PT CP design L1183X Nozzle 3.0 mm double CP 1 PT L1218 Nozzle 1.5 mm HD 1 PT L1219 Nozzle 2.0 mm HD 1 2 PT L1220 Nozzle 2.5 mm HD 1 PT CP L1218X Nozzle 1.5 mm HD CP 1 PT CP L1219X Nozzle 2.0 mm HD CP 1 PT CP L1220X Nozzle 2.5 mm HD CP 1 PT L1062 Nozzle 1.5 mm HD 1 3 PT L1063 Nozzle 2.0 mm HD 1 PT L1064 Nozzle 2.5 mm HD 1 PT L1065 Nozzle 3.0 mm HD 1 PT , P L410 Nozzle 1.0 mm 1 PT , P L411 Nozzle 1.2 mm 1 4 PT , P L412 Nozzle 1.5 mm 1 PT , P L413 Nozzle 1.8 mm 1 PT , P L414 Nozzle 2.0 mm 1 PT , P L415 Nozzle 2.5 mm 1 PT , P L465 Nozzle 1.0 mm 1 PT P L466 Nozzle 1.2 mm 1 PT , P L467 Nozzle 1.5 mm 1 5 PT L468 Nozzle 1.8 mm 1 PT , P L469 Nozzle 2.0 mm 1 PT , P L470 Nozzle 2.5 mm 1 PT L463 Nozzle 3.0 mm 1 Page 13

14 For Adige, Finn Power and GHT systems 5'' KN Sensor system 1 TR , AL53 Nozzle holder KTM 1.5" KN 1 PT L445 Nozzle 0.8 mm 1 PT X L30445 Nozzle 0.8 mm (10 pack) 10 PT , P L292 Nozzle 1.0 mm 1 PT X , P L30292 Nozzle 1.0 mm (10 pack) 10 PT , P L293 Nozzle 1.2 mm 1 PT X , P L30293 Nozzle 1.2 mm (10 pack) 10 PT , P L294 Nozzle 1.5 mm 1 PT X , P L30294 Nozzle 1.5 mm (10 pack) 10 PT , P L295 Nozzle 1.7 mm 1 2 PT X , P L30295 Nozzle 1.7 mm (10 pack) 10 PT , P L296 Nozzle 2.0 mm 1 PT X , P L30296 Nozzle 2.0 mm (10 pack) 10 PT L372 Nozzle 2.3 mm 1 PT X L30372 Nozzle 2.3 mm (10 pack) 10 PT L371 Nozzle 2.5 mm 1 PT X L30371 Nozzle 2.5 mm (10 pack) 10 PT L304 Nozzle 3.0 mm 1 PT X L30304 Nozzle 3.0 mm (10 pack) 10 PT L303 Nozzle 4.0 mm 1 PT X L30303 Nozzle 4.0 mm (10 pack) 10 DE M 1.5" PT , P L1055 Nozzle 1.0 mm KN 1 PT X , P L Nozzle 1.0 mm KN (10 pack) 10 PT , P L1056 Nozzle 1.2 mm KN 1 PT X , P L Nozzle 1.2 mm KN (10 pack) 10 3 PT , P L1057 Nozzle 1.5 mm KN 1 PT X , P L Nozzle 1.5 mm KN (10 pack) 10 PT L1058 Nozzle 1.8 mm KN 1 PT X L Nozzle 1.8 mm KN (10 pack) 10 PT L1059 Nozzle 2.0 mm KN 1 PT X L Nozzle 2.0 mm KN (10 pack) 10 Page 14

15 For Adige, Finn Power and GHT systems 5'' K SENSOR SYSTEM 1 PT , P AL67 Nozzle holder KT M1.5" K OEM 1 PT , P L350 Nozzle 1.0 mm 1 PT X , P L30350 Nozzle 1.0 mm (10 pack) 10 PT , P L351 Nozzle 1.2 mm 1 2 PT X , P L30351 Nozzle 1.2 mm (10 pack) 10 PT , P L352 Nozzle 1.5 mm 1 PT X , P L30352 Nozzle 1.5 mm (10 pack) 10 PT L353 Nozzle 2.0 mm 1 PT X L30353 Nozzle 2.0 mm (10 pack) '' CM SENSOR SYSTEM 3 PT , P , W149 AL138 Nozzle holder OEM KTM1.5" S F2.5" 1 4 PT AL352 Nozzle holder aluminum 1 PT , P , W222 L400 Nozzle 0.8 mm 1 PT X , P , W222 L30400 Nozzle 0.8 mm (10 pack) 10 PT , P , W223 L401 Nozzle 1.0 mm 1 PT X , P , W223 L30401 Nozzle 1.0 mm (10 pack) 10 PT , P L402 Nozzle 1.2 mm 10 PT X , P L30402 Nozzle 1.2 mm (10 pack) 1 PT , P , W224 L403 Nozzle 1.5 mm 1 PT X , P , W224 L30403X Nozzle 1.5 mm (10 pack) 10 PT P L543 Nozzle 1.8 mm 10 PT X P L30543 Nozzle 1.8 mm (10 pack) 1 PT , P , W225 L544 Nozzle 2.0 mm 1 PT X , P , W225 L30544 Nozzle 2.0 mm (10 pack) 10 5 PT P L546 Nozzle 2.3 mm 1 PT X P L30546 Nozzle 2.3 mm (10 pack) 10 PT , PO , W226 l545 Nozzle 2.5 mm 1 PT X , PO , W226 L30545 Nozzle 2.5 mm (10 pack) 10 PT L547 Nozzle 3.0 mm 1 PT X L30547 Nozzle 3.0 mm (10 pack) 10 PT CP , P , W222 L400X Nozzle 0.8 mm 1 PT CPX , P , W222 L30400X Nozzle 0.8 mm (10 pack) 10 PT CP , P , W223 L401X Nozzle 1.0 mm 1 PT CPX , P , W223 L30401X Nozzle 1.0 mm (10 pack) 10 PT CP , P L402X Nozzle 1.2 mm 1 PT CPX , P L30402X Nozzle 1.2 mm (10 pack) 10 PT CP , P , W224 L403X Nozzle 1.5 mm 1 PT CPX , P , W224 L30403X Nozzle 1.5 mm (10 pack) 10 Page 15

16 PT CP P L543X Nozzle 1.8 mm 1 PT CPX P L30543X Nozzle 1.8 mm (10 pack) 10 PT CP , P , W225 L544X Nozzle 2.0 mm 1 PT CPX , P , W225 L30544X Nozzle 2.0 mm (10 pack) 10 5 PT CP P L546X Nozzle 2.3 mm 1 PT CPX P L30546X Nozzle 2.3 mm (10 pack) 10 PT CP , P , W226 L545X Nozzle 2.5 mm 1 PT CPX , P , W226 L30545X Nozzle 2.5 mm (10 pack) 10 PT CP L547X Nozzle 3.0 mm 1 PT CPX L30547X Nozzle 3.0 mm (10 pack) 10 Page 16

17 For Adige and Mazak systems MAZAK 3D Precitec 5"C/MG 5"H/MG PT L554 Nozzle 1.0 mm 3D 1 PT X L30554 Nozzle 1.0 mm 3D (10 pack) 10 PT L555 Nozzle 1.2 mm 3D 1 PT X L30555 Nozzle 1.2 mm 3D (10 pack) 10 PT , P L556 Nozzle 1.5 mm 3D 1 PT X , P L30556 Nozzle 1.5 mm 3D (10 pack) 10 PT L557 Nozzle 1.8 mm 3D 1 1 PT X L30557 Nozzle 1.8 mm 3D (10 pack) 10 PT , P L558 Nozzle 2.0 mm 3D 1 PT X , P L30558 Nozzle 2.0 mm 3D (10 pack) 10 PT L560 Nozzle 2.5 mm 3D 1 PT X L30560 Nozzle 2.5 mm 3D (10 pack) 10 PT , L563 Nozzle 3.0 mm 3D 1 PT X L30563 Nozzle 3.0 mm 3D (10 pack) 10 PT L564 Nozzle 3.5 mm 3D 1 PT X L30564 Nozzle 3.5 mm 3D (10 pack) 10 PT L576 Nozzle 1.0 mm 2D 1 PT X L30576 Nozzle 1.0 mm 2D (10 pack) 10 PT L577 Nozzle 1.2 mm 2D 1 PT X L30577 Nozzle 1.2 mm 2D (10 pack) 10 PT P L578 Nozzle 1.5 mm 2D 1 PT X P L30578 Nozzle 1.5 mm 2D (10 pack) 10 2 PT L579 Nozzle 1.8 mm 2D 1 PT X L30579 Nozzle 1.8 mm 2D (10 pack) 10 PT , P L580 Nozzle 2.0 mm 2D 1 PT X , P L30580 Nozzle 2.0 mm 2D (10 pack) 10 PT L581 Nozzle 2.5 mm 2D 1 PT X L30581 Nozzle 2.5 mm 2D (10 pack) 10 PT L582 Nozzle 3.0 mm 2D 1 PT X L30582 Nozzle 3.0 mm 2D (10 pack) 10 3 PT , P AL160 Union nut Vespel 1 4 PT P , AL198 Insulating ring 1 5 PT AL218 Insulator 5-axis 1 6 AM AL94 Outer nozzle o-ring 1 7 PT AL256 Insulator collar 1 8 PT P , AL204 Sensor cable 500 mm (OEM) 1 9 PT , P AL257 Sensor cable armored 1 Page 17

18 For Adige and Mazak systems PT , P L480 Nozzle 1.0 mm ZK 1 PT X , P L30480 Nozzle 1.0 mm ZK (10 pack) 10 PT , P L481 Nozzle 1.2 mm ZK 1 PT X , P L30481 Nozzle 1.2 mm ZK (10 pack) 10 PT , P L482 Nozzle 1.5 mm ZK 1 1 PT X , P L30482 Nozzle 1.5 mm ZK (10 pack) 10 PT , P L483 Nozzle 1.8 mm ZK 1 PT X , P L30483 Nozzle 1.8 mm ZK (10 pack) 10 PT , P L484 Nozzle 2.0 mm ZK 1 PT X , P L30484 Nozzle 2.0 mm ZK (10 pack) 10 PT P L485 Nozzle 2.5 mm ZK 1 PT X , P L30485 Nozzle 2.5 mm ZK (10 pack) 10 PT , P L486 Nozzle 1.0 mm KK 1 PT X , P L30486 Nozzle 1.0 mm KK (10 pack) 10 PT , P L487 Nozzle 1.2 mm KK 1 PT X , P L30487 Nozzle 1.2 mm KK (10 pack) 10 2 PT , P L488 Nozzle 1.5 mm KK 1 PT X , P L30488 Nozzle 1.5 mm KK (10 pack) 10 PT , P L489 Nozzle 1.8 mm KK 1 PT X , P L30489 Nozzle 1.8 mm KK (10 pack) 10 PT P L490 Nozzle 2.0 mm KK 1 PT X P L30490 Nozzle 2.0 mm KK (10 pack) 10 PT L1760 Nozzle DE M1.5 KS 1.0 mm (Hex) 1 PT P L1761 Nozzle DE M1.5 KS 1.2 mm (Hex) 1 PT L1762 Nozzle DE M1.5 KS 1.5 mm (Hex) 1 3 PT P L1764 Nozzle DE M1.5 KS 2.0 mm (Hex) 1 PT X L L Nozzle DE M1.5 KS 1.0 mm (Hex) 10 PT X L L Nozzle DE M1.5 KS 1.2 mm (Hex) 10 PT X L L Nozzle DE M1.5 KS 1.5 mm (Hex) 10 PT X L L Nozzle DE M1.5 KS 2.0 mm (Hex) 10 4 PT P Nozzle holder KT M1.5" K S ceramic (OEM) 1 Page 18

19 For Adige and Finn-Power systems 5"DX 5" DXN PRECITEC SENSOR SYSTEM 1 PT , P AL35 Nozzle holder KT A1.5"DX ceramic 1 2 PT AL40 Nozzle holder KT A1.5"DXN ceramic 1 PT L87 Nozzle 0.8 mm 1 3 PT L10 Nozzle 1.25 mm 1 PT L90 Nozzle 1.5 mm 1 4 PT L40 Nozzle 1.5 mm HD 1 PT L186 Nozzle 1.8 mm HD 1 PT design L187 Nozzle 0.8 mm 1 5 PT design L188 Nozzle 1.25 mm 1 PT design L189 Nozzle 1.5 mm 1 6 PT design L190 Nozzle 1.5 mm 1 PT design L191 Nozzle 1.8 mm 1 7 LV design L157 Nozzle, inner 1 Page 19

20 For Adige and Finn-Power systems 5" DXN 5" DL SENSOR SYSTEM 1 PT , P , AL40 Nozzle holder KTM 1.5" DXN ceramic 1 2 PT Recommended , P , AL130/S Nozzle holder ITM 1.5" DZ 1 PT OEM , P , AL130 Nozzle holder ITM 1.5" DZ (OEM) aluminum 1 3 PT , P L365 Nozzle 1.0 mm 1 PT , P L366 Nozzle 1.2 mm 1 4 PT , P L367 Nozzle 1.5 mm 1 5 PT , P L368 Nozzle 1.7 mm 1 PT , P L369 Nozzle 2.0 mm 1 6 PT , P L370 Nozzle 2.5 mm 1 7 PT P AL201 Insulating ring plastic 1 8 AM AL94 Outer nozzle o-ring 1 Page 20

21 For Adige and Finn-Power systems 5"DX e 5"DXN PRECITEC SENSOR SYSTEM 1 PT , P AL35 Nozzle holder KT A1.5"DX ceramic 1 2 PT , P , AL40 Nozzle holder KTM 1.5" DXN ceramic 1 PT , P L163 Nozzle 1.0 mm 1 PT , P L164 Nozzle 1.2 mm 1 PT , P L165 Nozzle 1.5 mm 1 3 PT , P L166 Nozzle 2.0 mm 1 PT , P L167 Nozzle 2.5 mm 1 PT L462 Nozzle 2.7 mm 1 PT L201 Nozzle 3.0 mm 1 4 PT L L921 Nozzle 1.0 mm 1 PT L920 Nozzle 2.0 mm (w/counter bore) 1 PT design L259 Nozzle 1.0 mm HD 1 PT design L260 Nozzle 1.2 mm HD 1 5 PT design L261 Nozzle 1.5 mm HD 1 PT design L262 Nozzle 2.0 mm HD 1 PT design L263 Nozzle 2.5 mm HD 1 PT design L264 Nozzle 3.0 mm HD 1 6 LV design L157 Nozzle, inner 1 7 PT P AL201 Insulating ring plastic 1 8 AM AL94 Outer nozzle o-ring 1 Page 21

22 PRECITEC original spare parts (Not shown) PT P P OEM nozzle holder KT M1.5" K S ceramic 1 PT P AL211 OEM nozzle body SE M1.5" HNZ 1 PT P Connector head OEM 1 PT P Nut M1.5" DXN OEM 1 PT P Cable 200 mm OEM 1 PT P OG Y D50 d2 HII Protecting glass 1 PT P KE 300 gw Z mm Sensor cable OEM 1 PT P Electrode tacitile OEM 1 PT P ZM HP1.5" DR Seal 1.5" OEM 1 PT P0BMO KF ZM HP1.5" DF Seal 1.5" OEM 1 PT P Sensor SE HP 2.0" OEM 1 PT P Socket ZM HP 1.5" IB OEM 1 PT P Seals (set) ZM HP1.5" DS OEM 1 PT P Sensor insert SE M1.5DXN 1 PT P Lens ring set 1 PT P Nut tray 1 PT P Lens mount 0L YR30 F100 w/lens 1 PT P Electrode cable, KE 130 GW 1 PT P Electrode cable, KE 220 GGMM 1 PT AL350 Washer for cone 1 PT AL349 Inner sensor cone 1 ZE SE YK 52 Z 1 PT P AL244 Nozzle holder YKZ 1 PT P L1012 Nozzle 0.8 mm 1 2 PT P L1013 Nozzle 1.0 mm 1 PT P L1014 Nozzle 1.5 mm 1 PT (not shown) P OG Y D50 d2 HII Protecting glass 1 Page 22

23 For Adige, Durma, Ermakson, Finn Power, GHT, Hans, Mazak, SHT and Salvagnini systems Sensor cone repair 1 PT999-DXN Sensor repair DXN 2 MB A W429A 461 Sensor repair W429A 1 3 PT999-YH27 P Sensor repair YH PT999-YR30 YR-30 Sensor repair YR PT999-DZ Sensor repair DZ 1 6 PT999-HNZ P Sensor repair HNZ 1 PT999-HPZ (not shown) Sensor repair HPZ 1 7 PT999-KN Sensor repair KN 1 PT (not shown) Sensor repair S.5J 1 8 PT999-25ZJ P Sensor repair 25ZJ 1 MB W239 Sensor repair W239 1 PT999-HP2 (not shown) Sensor repair HP/HP2Z 1 PT999-LRC (not shown) Sensor repair LRC 1 New sensor cones 8 PT Sensor cone 2.5Z/J 1 PT (not shown) P Sensor cone LRC 1 PT (not shown) Sensor insert SE M1.5" DZ 1 Sensor cables 9 PT A P Sensor cable armored 500 mm (20") 1 PT (not shown) P Sensor cable armored 250 mm (10") 1 10 PT P , AL204 Sensor cable 500 mm (OEM) (20") 1 11 PT , P AL257 Sensor cable armored 1 PT OEM (not shown) Sensor cable ZWW 600 (OEM) 265 mm (10.4") 1 PT (not shown) P AL202 Sensor cable 450 mm (18") 1 PT A (not shown) 00B-15 Sensor cable 380 mm 1 PT (not shown) AL358 Sensor cable 305 mm armored (12") 1 PT (not shown) Sensor cable LRC 1 PT (not shown) P Sensor cable (OEM) KE 300 gw Z MM 1 PT (not shown) Electrode guard long 1 PT (not shown) 00BB-A-17i,BEC Sensor cable 431 mm armored (17") 1 PT A (not shown) P Sensor cable 300 mm KE armored 1 PT (not shown) AL257/S Sensor cable 390 mm 1 Sensor repairs available in select regions only. Page 23

24 PT (not shown) , P Insulating ring 1 PT (not shown) AL221 Insulating ring PT (not shown) P Insulating plate PT (not shown) AL353 Torch inner top PT (not shown) AL351 Torch outer top PT (not shown) P Spatter protection plate 2 PT (not shown) HNP-006 Connector cup HNP 1 Optics Lenses Type Diameter PT MEN 1.5" 5.0".290" PT MEN 1.5" 7.5".125" PT MEN 2.0" 5.0".378" PT /F PLX 1.5" 2.5".085" PT PLX 2.0" 10.0".310" PT PLX 2.0" 10.0".380" PT PLX 2.0" 10.0".500" PT PLX 1.5" 2.5".085" Focal length Edge thickness Windows Material Diameter Edge thickness PT FS mm 4.0 mm PT FS 50 mm 3.18 mm PT FS (with o-ring) mm 4.0 mm Optics care TR N/A Lens cleaning paper, Tiffen 50 piece 1 AM313-SC50 SC50 Lens cleaning paper, Tresor 50 piece 1 TR Lens cleaning pre-cut cotton 80 piece 1 TR300-SC20 Cotton swab 20 piece 1 TR AL1010 Dropper, lens cleaning fluid 1 TR Optical cleaning fluid 1 TR Injector 1 TR300-LSA Lens stress analyzer 1 TR AL255 Loupe, magnifying 1 TR AL271 Base, lens maintenance 1 TR Mirror polish (250 ml) 1 AM Lens polarizing filter 1.5" 1 AM Lens polarizing filter 2.0" 1 Page 24

25 Optics Material Diameter Edge thickness Phase shift mirrors PT CU 1.969".394" PT CU 2.36".394" PT CU 2.36".591" Reflectivity Type Material Diameter Edge thickness S1 Zero phase shift mirrors and total reflectors PT MMR CU 1.969".984" WC PT MMR CU 2.00".394" 5.7MCX PT MMR CU 2.00".394" 6.0MCC PT MMR CU 2.36".984" WC/FTGS PT MMR SI 2.0".200" PO/FG PT PS CU 1.969".984" WC/FTGS PT PS CU 2.36".984" WC/FTGS PT PS CU 3.0".500" PT PS CU 3.0".591" PT PS SI 2.0" 1.96" PT PS SI 2.5".250" PT PS SI 3.0".250" PT TRZ CU 1.96".394" CA-HOLE PT TRZ CU 1.969".984" WC PT TRZ CU 1.969".984" WC/FTGS PT TRZ CU 2.362".394" PT TRZ CU 3.0".591" PT TRZ SI 2.0".200" 45DEG PT TRZ SI 2.5".250" 45DEG PT TRZ SI 3.0".250" 22.5DEG AOI Optics care Material Diameter Edge thickness S1/Reflectivity S2 Output couplers PT ZNSE 1.0".200" 10MCC/6MCX 65% PT ZNSE 1.0".236" 55% PT ZNSE 1.1".220" 20MCC-80% PT ZNSE 1.1".232" 15MCC-50% 7.5MCX PT ZNSE 1.1".236" 65% PT ZNSE 1.1".236" 20MCC PT ZNSE 1.5".236" 15MCC-40% PT ZNSE 1.5".315" 15MCC-40% Material Diameter Edge thickness S1/Reflectivity S2 Rear mirrors PT GE 1.0".200" 99.5% PT GE 1.1".120" 15MCC PT GE 1.1".220" 30MCC-99.5% 23.62MCX PT GE 1.5".315" 15MCC-99.5% PT ZNSE 1.1".220" 30MCC-99.5% 40MCX TR N/A CO 2 Lens paper (50 sheets) 1 TR300-SC20 Cotton swab 20 piece 1 TR Lens cleaning pre-cut cotton 100 piece 1 TR AL1010 Dropper, lens cleaning fluid 1 TR AL255 Loupe, magnifying 1 TR AL271 Base, lens maintenance 1 TR Mirror polish (250 ml) 1 New items shown in bold Page 25

26 Page 26

27 Magic Free Radioactive Transparent Black Magic TM Lens Ultra Low Absorption Guaranteed < 0.13% Best Focus Stability Increased Durability Recommended for High Power Lasers over 5KW Best Surface Quality Established in 1976, Ophir Optronics is a global leader in precision IR optics components and laser measurement equipment. Our CO 2 Optics Group produces a full range of OEM and replacement optics including beam-delivery and cavity optics as well as windows. Ophir provides the highest quality CO 2 optics at the best price. Our commitment to the customer is second to none, with a global distribution and support network. This unwavering commitment to forward thinking helps keep us "A Cut Above the Rest". CERTIFIED QMS SI ISO 9001: 2000 A Cut Above The Rest Magic lenses are available worldwide. Ophir s Magic For more information please contact: co2@ophiropt.com Page 27

28 Page 28

29 Ophir & by Talas = 100% Kwaliteitsgarantie & 100% OEM compatibiliteitsgarantie. Talas is exclusief verdeler van o.a. lenzen & spiegels van Ophir voor BeLux en nozzles & ceramieken van /Hypertherm waardoor wij zeer competitieve tarieven hebben. Deze fabrikanten zijn tevens ook leverancier van de grootste fabrikanten(oem) van lasersnijmachines. Ophir, een CO² Optica groep en tweede grootste leverancier in de wereld is producent van het volledige gamma optieken voor de OEM en de vervangingsmarkt. Ophir fabriceert lenzen met verschillende coatings voor een lagere absorptie en voor een langere levensduur: -Duralens: max. absorptie 0,2%; standaard gele lens. -Black Magic: max. absorptie <0,15%; niet transparante, niet-radioactieve harde coating voor een stabieler focuspunt en hogere warmte geleiding, vochtbestendige coating. -Clear Magic: max. absorptie <0,13%; transparante, harde coating voor de beste focus stabiliteit en hoogste warmtebestendigheid, PMS-compatibel, vochtbestendige coating. /Hypertherm nozzles in een kopertellurium legering, vervaardigd op CNC met diamanten werktuigen, gegarandeerd braamloze bewerking, optimale warmteweerstand, constante geleiding, verspanende tolerantie en concentriciteit <0.01mm, zeer fijn afgewerkt binnenoppervlak voor een goede doorstroming van het gas en buitenafwerking tegen de hechting van de gesmolten materie, verchroomde nozzles vermijden hechting van de gesmolten materie, dubbele nozzles voor een betere kwaliteit en hogere snijsnelheid voor staal vanaf 8mm, lasermarkering van de diameter. Ophir & by Talas = garantie à 100% de qualité et 100% de garantie compatibilité OEM Talas est le distributeur exclusif de e.a. les lentilles et les miroirs de Ophir pour le BeLux et des buses & des céramiques de /Hypertherm. De ce fait nous avons des tarifs très compétitifs. Ces fabricants sont aussi fournisseurs des plus grands fabricants (OEM) des machines de découpe au laser.. Ophir, un groupe d optique CO ² et deuxième fournisseur en importance dans le monde, produit la gamme complète d optiques pour l'oem et le marché de pièces de rechange. Ophir fabrique des lentilles avec des revêtements différents pour un taux d absorption inférieur et une durée de vie plus longue: -Duralens: absorption maximale 0,2%, lentille standard jaune -Black Magic: absorption maximale <0,15%, non transparent, revêtement dur non radioactifs pour un point focal plus stable et une conductivité thermique plus élevée, revêtement résistant à l'humidité. -Clear Magic: absorption maximale <0,13%, revêtement dur transparent pour la meilleure stabilité du point focal et la meilleure résistance à la chaleur, le revêtement PMSconforme et résistant à l'humidité. /Hypertherm: buses dans un alliage cuivretellurium usinés avec outils diamant sur tours à CN, usinage garanti sans bavures, excellente résistance thermique, conductivité constante, tolérances d'usinage et de concentricité <0,01 mm, la surface intérieure finement travaillée pour une bonne fluidité du gaz et une finition extérieure lisse contre l accrochage de la matière en fusion, buses chromées évitant l accrochage de la matière en fusion, double buses pour une meilleure qualité et plus grande vitesse de coupe de l'acier de 8 mm, marquage au laser du diamètre. Type of nozzle & Reasons for selecting nozzle Reasons for selecting Adapter This means that it is possible to use a different type of nozzle as long as the nozzle adaptor is purchased. It adapts from a big nozzle to a smaller nozzle and this can save the end-user money in the long run. CP (chrome plated) CP nozzles are plated with chrome for increased durability. Chrome plated nozzles are much easier to clean and can withstand contact with material better than non-plated nozzles. Conical This refers to the internal geometry of the nozzle. Due to the internal geometry the gas swirls and spirals down towards the material causing a coaxial flow, this flow prevents plugging of the orifice. Cylindrical This refers to the internal geometry of the nozzle. Mainly used for gauge steel to 6,4 mm low pressure oxygen cutting. Double Just as it sounds, this is a nozzle within a nozzle. Sometimes referred to as a jacketed nozzle. Double nozzles are better for cutting thicker materials. Better refers to cut quality more than speed. Double nozzles have a high aspect ratio at the exit helping protect lens from back spatter. Double with holes or double nozzle insert Used with the outer nozzle; the double nozzle insert inserts into the outer nozzle to form a double. Double hard This is a double nozzle with the hard chrome plating (this type of chrome plating is only available in North America). Hard Hard chrome plating (only available in North America), is harder than standard chrome therefore it is more durable. Hex Hex refers to the machined edge of the nozzle, with the hex machined in it makes it possible to get an open end wrench on the nozzle for tightening and loosening. High pressure (HP) High density (HD) Used in applications where the gas pressures are really high, used on thicker material and stainless steel and aluminium. Low pressure Used for low pressure oxygen cutting applications such as gauge material up to 3,2 mm. Nozzle holder The nozzle holder sometimes also known as the ceramic is the mating partner for the nozzle; the two are combined by threading the nozzle into the holder. Nozzle, long Refers to the length of the nozzle. Nozzle, short Refers to the length of the nozzle. Nozzle, w/step This refers to the internal geometry of the nozzle. Mainly used in higher pressure cutting. Outer nozzle See double nozzle. This is the mating partner of the double nozzle insert, the two combined make a double nozzle. Shower Used to cut thick mild steel (>6,4 mm) w/o2 assist gas. Shower nozzles have a center nozzle orifice, surrounded by several other holes. This design ensures more effective assist gas volume, without significantly increasing real volume. Straight taper This refers to the internal geometry of the nozzle, mainly used in higher pressure cutting. WACS Water-assist cutting system. Page 29

30 Page 30