11812 NE 116th Street TEL: Kirkland, WA USA FAX: TECHNICAL DATA SHEET AMFLOW PR-HF-SSSP BACK PRESSURE REGULATOR

Transcription

1 A & H Enterprises, Inc. Amflow NE 116th Street TEL: Kirkland, WA USA FAX: ah@amflow.com TECHNICAL DATA SHEET AMFLOW PR-HF-SSSP BACK PRESSURE REGULATOR Part Number: (*Reference Order Guide) Certifications and Patents: Certification of material type and condition, and all post processes, including anodizing, heat treatment, plating, and all chemical processes, will be maintained on file with A&H Enterprises Inc, for a period not less than five years. ATEX II 2 G Ex d IIC T3 US Patent 7,343,929 B & International Patents Pending A&H Enterprises, Inc. reserves the right to amend and change specifications without prior notice US Patent 7,343,929 B2 & International Patent Pending * Rev. B, 10/14 Page 1 of 6

2 GA DRAWING US Patent 7,343,929 B2 & International Patent Pending * Rev. B, 10/14 Page 2 of 6

3 FEATURES & OPTIONS FEATURES Operating Torque: Owing to the design of the Amflow, the operating torque requirements are very low throughout the operating range, thus making it suitable for automated applications. The Amflow can be configured with a standard Amflow A2 Atex certified electronic valve actuator.. Control Outlet Orifices: The control orifice is a ceramic pin and seat design that can withstand very high pressure drops with minimal wear. Alternative Usage: The PR-HF-SSSP is also capable of being applied to different systems, such as wash-down systems. Panel Mount Dimensions Sub-Sea Option PR-HF-SSSP Shown with ROV Bucket Actuated Options PR-HF-SSSP Shown with Amflow A2-ACM Actuator (Belt Drive) PR-HF-SSSP Shown with Amflow A2-VACM Series Actuator (Direct Drive) US Patent 7,343,929 B2 & International Patent Pending * Rev. B, 10/14 Page 3 of 6

4 SPECIFICATIONS 1. FLOW RATES 1.01 Flow * MINIMUM: 5 LPH MAXIMUM: 7500 LPH 1.02 Operating Pressure MINIMUM: 69 bar (1,000 PSI) MAXIMUM: 931 bar (13,500 PSI) 1.03 Hydrostatic Pressure Test 1396 bar (20,250 PSI) 1.04 Operating Temperature MINIMUM: -15 C (5 F) MAXIMUM: 200 C (392 F) The chart below shows the expected flow characteristics for the PR-HF-SSSP with H2O 2. PORT CONFIGURATION Standard Special Order 2.01 Positioned as shown on picture SF750CX used with 3/4" Tube Contact Manufacturer for additional options 3. CONSTRUCTION MATERIALS Standard Material Special Order 3.01 Body 316 L Contact Manufacturer 3.02 Seals FFKM & PTFE Contact Manufacturer 4. CONTROL ORIFICE Standard Material Standard Seat Sizes (7 options) 4.01 Orifice = Pin & Seat Ceramic 1.5 mm, 2.0 mm, 3.0 mm, 4.75 mm, 6.35 mm, 8.0 mm & 9.75 mm 5. DIMENSIONS Metric Imperial 5.01 Height (overall) 262 mm 10.3 in 5.02 Diameter 97 mm 3.82 in 6. WEIGHT Metric Imperial kg 18.5 lb 7. PANEL MOUNT REQUIREMENTS Metric Imperial 7.01 Maximum Panel Thickness 7 mm in 7.02 Mounting Hole Diameter 46 mm 1.5 in NOTES: FLOW RATE: * Depending on the pressure range requirements of back pressure regulator, springs can be assembled in two different configurations. US Patent 7,343,929 B2 & International Patent Pending * Rev. B, 10/14 Page 4 of 6

5 ORDER GUIDE PRODUCT PRODUCT TYPE BODY MATERIAL SEAL FLOW RATE Max. H2O PRESSURE 316 L -001 TITANIUM LPH LPH LPH BAR BAR ASSEMBLY FFKM LPH BAR -03 DUPLEX SUPER DUPLEX LPH BAR -04 COMPLETE ORDER NUMBER: EXAMPLE TO ORDER: in 316 L with FFKM Seals, 3000 LPH, and 241 BAR Pressure YOU WOULD ORDER #: US Patent 7,343,929 B2 & International Patent Pending * Rev. B, 10/14 Page 5 of 6

6 REPRESENTATIVES AMFLOW NORGE Norway, Sweden, Denmark, Netherlands, Germany, U.K., Italy Prinsens vei Sandnes Norway Telephone: Fax: KIBARAN DINAMIK SDN BHD Malaysia No. 8A, Jalan Kota Raja J 27/J, Seksyen Shah Alalm, Selangor D.E. Malaysia Telephone: Fax: amflow.asia@gmail.com SUDIFLOW INTERGRATED SERVICES, LTD. Nigeria 17 Hetona Plaza, Elelenwo Road Port Harcourt, Nigeria Telephone: sudiflow@yahoo.com Amflow A & H Enterprises, Inc NE 116th Street TEL: Kirkland, WA USA FAX: ah@amflow.com * Rev. B, 10/14 Page 6 of 6